panda/board/board.h

65 lines
2.0 KiB
C

// ///////////////////////////////////////////////////////////// //
// Hardware abstraction layer for all different supported boards //
// ///////////////////////////////////////////////////////////// //
#include "board_declarations.h"
#include "boards/common.h"
// ///// Board definition and detection ///// //
#include "drivers/harness.h"
#ifdef PANDA
#include "boards/white.h"
#include "boards/grey.h"
#include "boards/black.h"
#else
#include "boards/pedal.h"
#endif
void detect_board_type(void) {
#ifdef PANDA
// SPI lines floating: white (TODO: is this reliable?)
if((detect_with_pull(GPIOA, 4, PULL_DOWN)) || (detect_with_pull(GPIOA, 5, PULL_DOWN)) || (detect_with_pull(GPIOA, 6, PULL_DOWN)) || (detect_with_pull(GPIOA, 7, PULL_DOWN))){
hw_type = HW_TYPE_WHITE_PANDA;
current_board = &board_white;
} else if(detect_with_pull(GPIOA, 13, PULL_DOWN)) { // Rev AB deprecated, so no pullup means black. In REV C, A13 is pulled up to 5V with a 10K
hw_type = HW_TYPE_GREY_PANDA;
current_board = &board_grey;
} else {
hw_type = HW_TYPE_BLACK_PANDA;
current_board = &board_black;
}
#else
#ifdef PEDAL
hw_type = HW_TYPE_PEDAL;
current_board = &board_pedal;
#else
hw_type = HW_TYPE_UNKNOWN;
puts("Hardware type is UNKNOWN!\n");
#endif
#endif
}
// ///// Configuration detection ///// //
bool has_external_debug_serial = 0;
bool is_entering_bootmode = 0;
void detect_configuration(void) {
// detect if external serial debugging is present
has_external_debug_serial = detect_with_pull(GPIOA, 3, PULL_DOWN);
#ifdef PANDA
if(hw_type == HW_TYPE_WHITE_PANDA) {
// check if the ESP is trying to put me in boot mode
is_entering_bootmode = !detect_with_pull(GPIOB, 0, PULL_UP);
} else {
is_entering_bootmode = 0;
}
#else
is_entering_bootmode = 0;
#endif
}
// ///// Board functions ///// //
bool board_has_gps(void) {
return ((hw_type == HW_TYPE_GREY_PANDA) || (hw_type == HW_TYPE_BLACK_PANDA));
}