diff --git a/src/Hardware.tex b/src/Hardware.tex
index c5d831c..bbd1cc1 100644
--- a/src/Hardware.tex
+++ b/src/Hardware.tex
@@ -114,33 +114,6 @@ In the background is a white antenna for GNSS (GPS) and a solar power setup.
 \end{center}
 \end{figure}
 
-Inside the camera enclosure, as shown in Figure
-\ref{fig:video-enclosure-top-open}, page \pageref{fig:video-enclosure-top-open},
-is:
-
-\begin{itemize}
-  \item The Imaging Source DMX camera with Sony IMX174 CMOS.
-  \item Odroid N2 running Debian.
-  \item Odroid N2 plastic enclosure, large half, hole drilled for ad-hoc mounting.
-  \item Blower fan on top, with power cable (came with Bosch enclosure).
-  \item Fan, maybe not so useful, with power cable (came with Bosch enclosure).
-  \item Camera mounting plate (came with Bosch enclosure).
-  \item Camera mounting screws, M6x25 (?).
-  \item Ethernet cable, internal, short white (came with Bosch enclosure).
-  \item PoE ethernet cable, external, plugged into PoE switch for data and power.
-  \item USB 3 cable, internal, way too long, needs replacing, from Odroid to camera. XXX flat connector
-  \item USB 3 cable, external, from Odroid to telescope mount. XXX large rectangle connector
-  \item ``Custom'' 12V DC power cable from Bosch PoE to Odroid.
-  \item Assorted nuts, bolts, and washers for an ad-hoc standoff height.
-\end{itemize}
-
-\begin{figure}[h!]
-\begin{center}
-\includegraphics[keepaspectratio=true,height=0.40\textheight,width=1.00\textwidth,angle=0]{video-enclosure-top-open-web.png}
- \caption{Camera enclosure, opened.}
- \label{fig:video-enclosure-top-open}
-\end{center}
-\end{figure}
 
 The camera lens is protected by the enclosure glass, which is IP67 (XXX) rated.
 See a close up of the front of the enclosure and camera lens in figure
@@ -181,3 +154,41 @@ These are unscrewed with a hex head tool (supplied) to open the enclosure.
 \end{center}
 \end{figure}
 
+The enclosure is opened from the right side, as shown in figure
+\ref{fig:video-enclosure-right}, page \pageref{fig:video-enclosure-right}.
+
+\begin{figure}[h!]
+\begin{center}
+\includegraphics[keepaspectratio=true,height=0.40\textheight,width=1.00\textwidth,angle=0]{video-enclosure-right-open-web.png}
+ \caption{Camera enclosure, right side, opened.}
+ \label{fig:video-enclosure-right-open}
+\end{center}
+\end{figure}
+
+Inside the camera enclosure, as shown in Figure
+\ref{fig:video-enclosure-top-open}, page \pageref{fig:video-enclosure-top-open},
+is:
+
+\begin{itemize}
+  \item The Imaging Source DMX camera with Sony IMX174 CMOS.
+  \item Odroid N2 running Debian.
+  \item Odroid N2 plastic enclosure, large half, hole drilled for ad-hoc mounting.
+  \item Blower fan on top, with power cable (came with Bosch enclosure).
+  \item Fan, maybe not so useful, with power cable (came with Bosch enclosure).
+  \item Camera mounting plate (came with Bosch enclosure).
+  \item Camera mounting screws, M6x25 (?).
+  \item Ethernet cable, internal, short white (came with Bosch enclosure).
+  \item PoE ethernet cable, external, plugged into PoE switch for data and power.
+  \item USB 3 cable, internal, way too long, needs replacing, from Odroid to camera. XXX flat connector
+  \item USB 3 cable, external, from Odroid to telescope mount. XXX large rectangle connector
+  \item ``Custom'' 12V DC power cable from Bosch PoE to Odroid.
+  \item Assorted nuts, bolts, and washers for an ad-hoc standoff height.
+\end{itemize}
+\begin{figure}[h!]
+\begin{center}
+\includegraphics[keepaspectratio=true,height=0.40\textheight,width=1.00\textwidth,angle=0]{video-enclosure-top-open-web.png}
+ \caption{Camera enclosure, opened.}
+ \label{fig:video-enclosure-top-open}
+\end{center}
+\end{figure}
+