From a2fa128a93e7fcc67cbf50a7aa1a4b749513ba86 Mon Sep 17 00:00:00 2001
From: Jeff Moe <moe@spacecruft.org>
Date: Fri, 26 Aug 2022 21:14:48 -0600
Subject: [PATCH] astroimagej, enclosure, etc

---
 src/Ground_Stations.tex |  4 ++--
 src/Hardware.tex        | 42 +++++++++++++++++++++++++++++++++++++++++
 src/SNOUG.tex           |  9 +++++----
 src/Support.tex         |  5 ++++-
 4 files changed, 53 insertions(+), 7 deletions(-)

diff --git a/src/Ground_Stations.tex b/src/Ground_Stations.tex
index 971ec16..1bbb6e3 100644
--- a/src/Ground_Stations.tex
+++ b/src/Ground_Stations.tex
@@ -23,7 +23,7 @@ volunteer-run, radio frequency ground stations, such as in Figure
 \begin{figure}[h!]
 \begin{center}
 \includegraphics[keepaspectratio=true,height=0.40\textheight,width=1.00\textwidth,angle=0]{spacecruft-rotator.png}
- \caption{SatNOGS ground station with VHF and UHF antennas on a rotator.}
+ \caption{SatNOGS ground station with VHF (right) and UHF (left) antennas on a mast with Alt/Az rotator.}
  \label{fig:spacecruft-rotator}
 \end{center}
 \end{figure}
@@ -40,7 +40,7 @@ seen in Figure
 \begin{figure}[h!]
 \begin{center}
 \includegraphics[keepaspectratio=true,height=0.40\textheight,width=1.00\textwidth,angle=0]{video-enclosure-mount-tripod-web.png}
- \caption{SatNOGS Optical ground station prototype with telescope tracking mount.}
+ \caption{SatNOGS Optical ground station prototype with telescope tracking mount on tripod.}
  \label{fig:video-enclosure-mount-tripod}
 \end{center}
 \end{figure}
diff --git a/src/Hardware.tex b/src/Hardware.tex
index da99b92..b00ada4 100644
--- a/src/Hardware.tex
+++ b/src/Hardware.tex
@@ -97,5 +97,47 @@ Comparing embedded computers for SatNOGS Optical.
 This is an example of a tracking ground station.
 It is a prototype, so there are lots of mis-matched,
 overbuilt/underbuilt parts.
+The full setup on tripod, can be seen in
+\ref{fig:video-enclosure-mount-tripod}, page \pageref{fig:video-enclosure-mount-tripod}.
 
+A close up of the setup can be seen at
+\ref{fig:video-enclosure-mount}, page \pageref{fig:video-enclosure-mount},
+showing the Skywatcher telescope mount, a Bosch PoE camera enclosure,
+and through the glass the camera lense.
+In the background is a white antenna for GNSS (GPS) and a solar power setup.
+
+\begin{figure}[h!]
+\begin{center}
+\includegraphics[keepaspectratio=true,height=0.40\textheight,width=1.00\textwidth,angle=0]{video-enclosure-mount-web.png}
+ \caption{SatNOGS Optical ground station prototype with telescope tracking mount.}
+ \label{fig:video-enclosure-mount}
+\end{center}
+\end{figure}
+
+Inside the camera enclosure, as shown in Figure
+\ref{fig:video-enclosure-top-open}, page \pageref{fig:video-enclosure-top-open},
+is:
+
+\begin{itemize}
+  \item The Imaging Source DMX camera with Sony IMX174 CMOS.
+  \item Odroid N2 running Debian.
+  \item Blower fan on top, with power cable (came with Bosch enclosure).
+  \item Fan, maybe not so useful, with power cable (came with Bosch enclosure).
+  \item Camera mounting plate (came with Bosch enclosure).
+  \item Camera mounting screws, M6x25 (?).
+  \item Ethernet cable, internal, short white (came with Bosch enclosure).
+  \item PoE ethernet cable, external, plugged into PoE switch for data and power.
+  \item USB 3 cable, internal, way too long, needs replacing, from Odroid to camera. XXX flat connector
+  \item USB 3 cable, external, from Odroid to telescope mount. XXX large rectangle connector
+  \item ``Custom'' 12V DC power cable from Bosch PoE to Odroid.
+  \item Assorted nuts, bolts, and washers for an ad-hoc standoff height.
+\end{itemize}
+
+\begin{figure}[h!]
+\begin{center}
+\includegraphics[keepaspectratio=true,height=0.40\textheight,width=1.00\textwidth,angle=0]{video-enclosure-top-open-web.png}
+ \caption{Camera enclosure, opened.}
+ \label{fig:video-enclosure-top-open}
+\end{center}
+\end{figure}
 
diff --git a/src/SNOUG.tex b/src/SNOUG.tex
index 7794f14..58aca87 100644
--- a/src/SNOUG.tex
+++ b/src/SNOUG.tex
@@ -279,10 +279,11 @@ leftmargin=1cm,rightmargin=1cm
 % Comment out a line to not render that chapter
 \chapterconf{Satellites}{Satellites}{Artificial Satellites}
 \chapterconf{Ground_Stations}{Ground Stations}{Earth Ground Stations}
-\chapterconf{Hardware}{Hardware}{Hardware for Optical Ground Stations}
-\chapterconf{Operation}{Operation}{Operating Optical Ground Stations}
-\chapterconf{Support}{Support}{Help}
-\chapterconf{Contact}{Contact}{Email}
+\chapterconf{Hardware}{Hardware}{Design and Set Up an Optical Ground Station}
+\chapterconf{Operation}{Operation}{HOWTO Operate a Station}
+\chapterconf{Analysis}{Analysis}{More Than Just Starlink and Old Rocket Bodies}
+\chapterconf{Support}{Support}{Help!}
+\chapterconf{Contact}{Contact}{Email, Chat, Forum}
 %% END MAINMATTER CHAPTERS %%%
 
 %%% END MAINMATTER %%%
diff --git a/src/Support.tex b/src/Support.tex
index f7219e0..810f038 100644
--- a/src/Support.tex
+++ b/src/Support.tex
@@ -17,5 +17,8 @@
 \setlength{\parindent}{0pt}
 How to get help.
 
-\url{https://community.libre.space}
+\begin{itemize}
+  \item \texttt{\#satnogs-optical} channel in Matrix --- \url{\#satnogs-optical:matrix.org}
+  \item Libre Space Foundation Community Forum --- \url{https://community.libre.space}
+\end{itemize}