From 13095600a59f9fcfe187977045d122640fe75435 Mon Sep 17 00:00:00 2001 From: Deon Ramsey Date: Fri, 3 May 2002 19:56:28 +0000 Subject: [PATCH] depcomp for automake 1.6.1 --- depcomp | 436 +++++++++++++++++++++++++++++++++++++++++++++ manual/Makefile.in | 204 ++++++++++++--------- 2 files changed, 553 insertions(+), 87 deletions(-) create mode 100755 depcomp diff --git a/depcomp b/depcomp new file mode 100755 index 000000000..3480ce4e9 --- /dev/null +++ b/depcomp @@ -0,0 +1,436 @@ +#! /bin/sh + +# depcomp - compile a program generating dependencies as side-effects +# Copyright 1999, 2000 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi +# `libtool' can also be set to `yes' or `no'. + +if test -z "$depfile"; then + base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'` + dir=`echo "$object" | sed 's,/.*$,/,'` + if test "$dir" = "$object"; then + dir= + fi + # FIXME: should be _deps on DOS. + depfile="$dir.deps/$base" +fi + +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. + "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> $depfile + echo >> $depfile + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> $depfile + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. This file always lives in the current directory. + # Also, the AIX compiler puts `$object:' at the start of each line; + # $object doesn't have directory information. + stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'` + tmpdepfile="$stripped.u" + outname="$stripped.o" + if test "$libtool" = yes; then + "$@" -Wc,-M + else + "$@" -M + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + + if test -f "$tmpdepfile"; then + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" + sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + + base=`echo "$object" | sed -e 's/\.o$//' -e 's/\.lo$//'` + tmpdepfile1="$base.o.d" + tmpdepfile2="$base.d" + if test "$libtool" = yes; then + "$@" -Wc,-MD + else + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + if test -f "$tmpdepfile1"; then + tmpdepfile="$tmpdepfile1" + else + tmpdepfile="$tmpdepfile2" + fi + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a space and a tab in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the proprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + test -z "$dashmflag" && dashmflag=-M + ( IFS=" " + case " $* " in + *" --mode=compile "*) # this is libtool, let us make it quiet + for arg + do # cycle over the arguments + case "$arg" in + "--mode=compile") + # insert --quiet before "--mode=compile" + set fnord "$@" --quiet + shift # fnord + ;; + esac + set fnord "$@" "$arg" + shift # fnord + shift # "$arg" + done + ;; + esac + "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + ) & + proc=$! + "$@" + stat=$? + wait "$proc" + if test "$stat" != 0; then exit $stat; fi + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + # X makedepend + ( + shift + cleared=no + for arg in "$@"; do + case $cleared in no) + set ""; shift + cleared=yes + esac + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift;; + -*) + ;; + *) + set fnord "$@" "$arg"; shift;; + esac + done + obj_suffix="`echo $object | sed 's/^.*\././'`" + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@" + ) & + proc=$! + "$@" + stat=$? + wait "$proc" + if test "$stat" != 0; then exit $stat; fi + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the proprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + ( IFS=" " + case " $* " in + *" --mode=compile "*) + for arg + do # cycle over the arguments + case $arg in + "--mode=compile") + # insert --quiet before "--mode=compile" + set fnord "$@" --quiet + shift # fnord + ;; + esac + set fnord "$@" "$arg" + shift # fnord + shift # "$arg" + done + ;; + esac + "$@" -E | + sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + ) & + proc=$! + "$@" + stat=$? + wait "$proc" + if test "$stat" != 0; then exit $stat; fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the proprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + ( IFS=" " + case " $* " in + *" --mode=compile "*) + for arg + do # cycle over the arguments + case $arg in + "--mode=compile") + # insert --quiet before "--mode=compile" + set fnord "$@" --quiet + shift # fnord + ;; + esac + set fnord "$@" "$arg" + shift # fnord + shift # "$arg" + done + ;; + esac + for arg + do + case "$arg" in + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + ) & + proc=$! + "$@" + stat=$? + wait "$proc" + if test "$stat" != 0; then exit $stat; fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 diff --git a/manual/Makefile.in b/manual/Makefile.in index 25941a6df..5c7e922bb 100644 --- a/manual/Makefile.in +++ b/manual/Makefile.in @@ -1,6 +1,8 @@ -# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am +# Makefile.in generated by automake 1.6.1 from Makefile.am. +# @configure_input@ -# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -10,7 +12,7 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. - +@SET_MAKE@ SHELL = @SHELL@ srcdir = @srcdir@ @@ -31,11 +33,8 @@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include - -DESTDIR = pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ - top_builddir = .. ACLOCAL = @ACLOCAL@ @@ -43,12 +42,15 @@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ - NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : @@ -57,10 +59,18 @@ PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +pkgdatadir = $(datadir)/@PACKAGE@/manual +AMTAR = @AMTAR@ +AWK = @AWK@ CC = @CC@ CPP = @CPP@ CXX = @CXX@ CXXCPP = @CXXCPP@ +DEPDIR = @DEPDIR@ GNOMEGNORBA_LIBS = @GNOMEGNORBA_LIBS@ GNOMEUI_LIBS = @GNOMEUI_LIBS@ GNOME_APPLETS_LIBS = @GNOME_APPLETS_LIBS@ @@ -77,7 +87,7 @@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_CONFIG = @GTK_CONFIG@ GTK_LIBS = @GTK_LIBS@ HIPDIR = @HIPDIR@ -MAKEINFO = @MAKEINFO@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ORBIT_CFLAGS = @ORBIT_CFLAGS@ ORBIT_CONFIG = @ORBIT_CONFIG@ ORBIT_IDL = @ORBIT_IDL@ @@ -85,142 +95,162 @@ ORBIT_LIBS = @ORBIT_LIBS@ PACKAGE = @PACKAGE@ PTHREAD_LIB = @PTHREAD_LIB@ RANLIB = @RANLIB@ +STRIP = @STRIP@ VERSION = @VERSION@ XPM_LIBS = @XPM_LIBS@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ ZVT_LIBS = @ZVT_LIBS@ +am__include = @am__include@ +am__quote = @am__quote@ cflags_set = @cflags_set@ cxxflags_set = @cxxflags_set@ - -pkgdatadir = $(datadir)/@PACKAGE@/manual +install_sh = @install_sh@ pkgdata_DATA = $(wildcard *.html) $(wildcard *.css) EXTRA_DIST = $(pkgdata_DATA) +subdir = manual mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = ../config.h -CONFIG_CLEAN_FILES = -DATA = $(pkgdata_DATA) +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DATA = $(pkgdata_DATA) -DIST_COMMON = Makefile.am Makefile.in +DIST_COMMON = Makefile.am Makefile.in +all: all-am - -DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) - -TAR = tar -GZIP_ENV = --best -all: all-redirect .SUFFIXES: -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOMAKE) --gnu manual/Makefile - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status - - +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu manual/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +uninstall-info-am: +pkgdataDATA_INSTALL = $(INSTALL_DATA) install-pkgdataDATA: $(pkgdata_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(pkgdatadir) @list='$(pkgdata_DATA)'; for p in $$list; do \ - if test -f $(srcdir)/$$p; then \ - echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkgdatadir)/$$p"; \ - $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkgdatadir)/$$p; \ - else if test -f $$p; then \ - echo " $(INSTALL_DATA) $$p $(DESTDIR)$(pkgdatadir)/$$p"; \ - $(INSTALL_DATA) $$p $(DESTDIR)$(pkgdatadir)/$$p; \ - fi; fi; \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(pkgdataDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgdatadir)/$$f"; \ + $(pkgdataDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgdatadir)/$$f; \ done uninstall-pkgdataDATA: @$(NORMAL_UNINSTALL) - list='$(pkgdata_DATA)'; for p in $$list; do \ - rm -f $(DESTDIR)$(pkgdatadir)/$$p; \ + @list='$(pkgdata_DATA)'; for p in $$list; do \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " rm -f $(DESTDIR)$(pkgdatadir)/$$f"; \ + rm -f $(DESTDIR)$(pkgdatadir)/$$f; \ done tags: TAGS TAGS: +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) - -subdir = manual +top_distdir = .. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) distdir: $(DISTFILES) - here=`cd $(top_builddir) && pwd`; \ - top_distdir=`cd $(top_distdir) && pwd`; \ - distdir=`cd $(distdir) && pwd`; \ - cd $(top_srcdir) \ - && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu manual/Makefile @for file in $(DISTFILES); do \ - d=$(srcdir); \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ if test -d $$d/$$file; then \ - cp -pr $$d/$$file $(distdir)/$$file; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ - || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ - || cp -p $$d/$$file $(distdir)/$$file || :; \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ fi; \ done -info-am: -info: info-am -dvi-am: -dvi: dvi-am check-am: all-am check: check-am -installcheck-am: -installcheck: installcheck-am -install-exec-am: -install-exec: install-exec-am +all-am: Makefile $(DATA) -install-data-am: install-pkgdataDATA +installdirs: + $(mkinstalldirs) $(DESTDIR)$(pkgdatadir) + +install: install-am +install-exec: install-exec-am install-data: install-data-am +uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am -install: install-am -uninstall-am: uninstall-pkgdataDATA -uninstall: uninstall-am -all-am: Makefile $(DATA) -all-redirect: all-am + +installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install -installdirs: - $(mkinstalldirs) $(DESTDIR)$(pkgdatadir) - - + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -rm -f config.cache config.log stamp-h stamp-h[0-9]* + -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* maintainer-clean-generic: -mostlyclean-am: mostlyclean-generic - -mostlyclean: mostlyclean-am - -clean-am: clean-generic mostlyclean-am - + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." clean: clean-am -distclean-am: distclean-generic clean-am +clean-am: clean-generic mostlyclean-am distclean: distclean-am -maintainer-clean-am: maintainer-clean-generic distclean-am - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: install-pkgdataDATA + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: maintainer-clean: maintainer-clean-am -.PHONY: uninstall-pkgdataDATA install-pkgdataDATA tags distdir info-am \ -info dvi-am dvi check check-am installcheck-am installcheck \ -install-exec-am install-exec install-data-am install-data install-am \ -install uninstall-am uninstall all-redirect all-am all installdirs \ -mostlyclean-generic distclean-generic clean-generic \ -maintainer-clean-generic clean mostlyclean distclean maintainer-clean +maintainer-clean-am: distclean-am maintainer-clean-generic +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic + +uninstall-am: uninstall-info-am uninstall-pkgdataDATA + +.PHONY: all all-am check check-am clean clean-generic distclean \ + distclean-generic distdir dvi dvi-am info info-am install \ + install-am install-data install-data-am install-exec \ + install-exec-am install-info install-info-am install-man \ + install-pkgdataDATA install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic uninstall uninstall-am \ + uninstall-info-am uninstall-pkgdataDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded.