; This is a GNSS-SDR configuration file
; The configuration API is described at https://gnss-sdr.org/docs/sp-blocks/
; SPDX-License-Identifier: GPL-3.0-or-later
; SPDX-FileCopyrightText: (C) 2010-2020  (see AUTHORS file for a list of contributors)

; You can define your own receiver and invoke it by doing
; gnss-sdr --config_file=my_GNSS_SDR_configuration.conf
;

[GNSS-SDR]

;######### GLOBAL OPTIONS ##################
;internal_fs_sps: Internal signal sampling frequency after the signal conditioning stage [samples per second].
GNSS-SDR.internal_fs_sps=50000000

;######### SUPL RRLP GPS assistance configuration #####
; Check https://www.mcc-mnc.com/
; On Android: https://play.google.com/store/apps/details?id=net.its_here.cellidinfo&hl=en
;GNSS-SDR.SUPL_gps_enabled=false
;GNSS-SDR.SUPL_read_gps_assistance_xml=false
;GNSS-SDR.SUPL_gps_ephemeris_server=supl.google.com
;GNSS-SDR.SUPL_gps_ephemeris_port=7275
;GNSS-SDR.SUPL_gps_acquisition_server=supl.google.com
;GNSS-SDR.SUPL_gps_acquisition_port=7275
;GNSS-SDR.SUPL_MCC=244
;GNSS-SDR.SUPL_MNC=5
;GNSS-SDR.SUPL_LAC=0x59e2
;GNSS-SDR.SUPL_CI=0x31b0

;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=File_Signal_Source
SignalSource.filename=/datalogger/signals/ifen/Galileo_E5ab_IFEN_CTTC_run1.dat   ; <- PUT YOUR FILE HERE
SignalSource.item_type=gr_complex
SignalSource.sampling_frequency=50000000
SignalSource.samples=0
SignalSource.repeat=false
SignalSource.dump=false
SignalSource.dump_filename=../data/signal_source.dat
SignalSource.enable_throttle_control=false


;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Signal_Conditioner

;######### DATA_TYPE_ADAPTER CONFIG ############
DataTypeAdapter.implementation=Pass_Through

;######### INPUT_FILTER CONFIG ############
InputFilter.implementation=Freq_Xlating_Fir_Filter
InputFilter.input_item_type=gr_complex
InputFilter.output_item_type=gr_complex
InputFilter.taps_item_type=float
InputFilter.number_of_taps=5
InputFilter.number_of_bands=2
InputFilter.band1_begin=0.0
InputFilter.band1_end=0.45
InputFilter.band2_begin=0.55
InputFilter.band2_end=1.0
InputFilter.ampl1_begin=1.0
InputFilter.ampl1_end=1.0
InputFilter.ampl2_begin=0.0
InputFilter.ampl2_end=0.0
InputFilter.band1_error=1.0
InputFilter.band2_error=1.0
InputFilter.filter_type=bandpass
InputFilter.grid_density=16
InputFilter.sampling_frequency=50000000
InputFilter.IF=-15345000
InputFilter.decimation_factor=1
InputFilter.dump=false
InputFilter.dump_filename=../data/input_filter.dat


;######### RESAMPLER CONFIG ############
Resampler.implementation=Pass_Through
Resampler.dump=false
Resampler.dump_filename=../data/resampler.dat


;######### CHANNELS GLOBAL CONFIG ############
Channels_5X.count=8
Channels.in_acquisition=1
Channel.signal=5X

;######### SPECIFIC CHANNELS CONFIG ######
;#The following options are specific to each channel and overwrite the generic options

;######### CHANNEL 0 CONFIG ############
Channel0.signal=5X
;Channel0.satellite=19
;Channel0.repeat_satellite=true

;######### CHANNEL 1 CONFIG ############
Channel1.signal=5X
;Channel1.satellite=12

;######### CHANNEL 2 CONFIG ############
Channel2.signal=5X
;Channel2.satellite=11

;######### CHANNEL 3 CONFIG ############
Channel3.signal=5X
;Channel3.satellite=20

;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_5X.implementation=Galileo_E5a_Noncoherent_IQ_Acquisition_CAF
Acquisition_5X.item_type=gr_complex
Acquisition_5X.coherent_integration_time_ms=1
Acquisition_5X.threshold=0.002
Acquisition_5X.doppler_max=10000
Acquisition_5X.doppler_step=250
Acquisition_5X.bit_transition_flag=false
Acquisition_5X.max_dwells=1
Acquisition_5X.CAF_window_hz=0 ;  **Only for E5a** Resolves doppler ambiguity averaging the specified BW in the winner code delay. If set to 0 CAF filter is desactivated. Recommended value 3000 Hz
Acquisition_5X.Zero_padding=0 ; **Only for E5a** Avoids power loss and doppler ambiguity in bit transitions by correlating one code with twice the input data length, ensuring that at least one full code is present without transitions. If set to 1 it is ON, if set to 0 it is OFF.
Acquisition_5X.dump=false
Acquisition_5X.dump_filename=./acq_dump.dat


;######### TRACKING GLOBAL CONFIG ############
Tracking_5X.implementation=Galileo_E5a_DLL_PLL_Tracking
Tracking_5X.item_type=gr_complex
Tracking_5X.pll_bw_hz=20.0;
Tracking_5X.dll_bw_hz=20.0;
Tracking_5X.pll_bw_narrow_hz=20.0;
Tracking_5X.dll_bw_narrow_hz=20.0;
Tracking_5X.order=2;
Tracking_5X.early_late_space_chips=0.5;
Tracking_5X.dump=false
Tracking_5X.dump_filename=./tracking_ch_


;######### TELEMETRY DECODER CONFIG ############
TelemetryDecoder_5X.implementation=Galileo_E5a_Telemetry_Decoder
TelemetryDecoder_5X.dump=false


;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables
Observables.dump=false
Observables.dump_filename=./observables.dat


;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
PVT.positioning_mode=PPP_Static  ; options: Single, Static, Kinematic, PPP_Static, PPP_Kinematic
PVT.iono_model=OFF ; options: OFF, Broadcast, SBAS, Iono-Free-LC, Estimate_STEC, IONEX
PVT.trop_model=OFF ; options: OFF, Saastamoinen, SBAS, Estimate_ZTD, Estimate_ZTD_Grad
PVT.output_rate_ms=100
PVT.dump=false
PVT.dump_filename=./PVT
PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea
PVT.flag_nmea_tty_port=true
PVT.nmea_dump_devname=/dev/pts/4
PVT.flag_rtcm_server=true
PVT.flag_rtcm_tty_port=false
PVT.rtcm_dump_devname=/dev/pts/1