gnss-sdr-conf/conf/Nooelec-NESDR-SMArTee-v2.conf

169 lines
5.0 KiB
Plaintext
Raw Permalink Blame History

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

[GNSS-SDR]
;######### GLOBAL OPTIONS ##################
GNSS-SDR.internal_fs_sps=2000000
; gnss-sdr-monitor
GNSS-SDR.telecommand_enabled=true
GNSS-SDR.telecommand_tcp_port=3333
;######### SIGNAL_SOURCE CONFIG ############
SignalSource.implementation=Osmosdr_Signal_Source
SignalSource.item_type=gr_complex
SignalSource.sampling_frequency=2000000
SignalSource.freq=1575420000
SignalSource.gain=40
SignalSource.rf_gain=40
SignalSource.if_gain=30
SignalSource.AGC_enabled=false
SignalSource.samples=0
SignalSource.repeat=false
;# Next line enables the internal HackRF One bias (3.3 VDC)
;SignalSource.osmosdr_args=hackrf,bias=1
;
; XXX
; Need Nooelec NESDR SMArTee v2 SDR - Premium RTL-SDR w/ Aluminum Enclosure, Bias Tee, 0.5PPM TCXO, SMA Input. RTL2832U & R820T2-Based
; https://www.nooelec.com/store/sdr/sdr-receivers/nesdr-smartee-sdr.html
SignalSource.osmosdr_args=rtl,bias=1
; XXX
;
SignalSource.enable_throttle_control=false
SignalSource.dump=false
SignalSource.dump_filename=./signal_source.dat
;######### SIGNAL_CONDITIONER CONFIG ############
SignalConditioner.implementation=Signal_Conditioner
;######### DATA_TYPE_ADAPTER CONFIG ############
DataTypeAdapter.implementation=Pass_Through
;######### INPUT_FILTER CONFIG ############
InputFilter.implementation=Freq_Xlating_Fir_Filter
InputFilter.decimation_factor=1
InputFilter.input_item_type=gr_complex
InputFilter.output_item_type=gr_complex
InputFilter.taps_item_type=float
InputFilter.number_of_taps=5
InputFilter.number_of_bands=2
InputFilter.band1_begin=0.0
InputFilter.band1_end=0.85
InputFilter.band2_begin=0.9
InputFilter.band2_end=1.0
InputFilter.ampl1_begin=1.0
InputFilter.ampl1_end=1.0
InputFilter.ampl2_begin=0.0
InputFilter.ampl2_end=0.0
InputFilter.band1_error=1.0
InputFilter.band2_error=1.0
InputFilter.filter_type=bandpass
InputFilter.grid_density=16
InputFilter.dump=false
InputFilter.dump_filename=../data/input_filter.dat
;######### RESAMPLER CONFIG ############
Resampler.implementation=Pass_Through
;######### CHANNELS GLOBAL CONFIG ############
Channels_1C.count=8
Channels.in_acquisition=1
;######### ACQUISITION GLOBAL CONFIG ############
Acquisition_1C.implementation=GPS_L1_CA_PCPS_Acquisition
Acquisition_1C.item_type=gr_complex
Acquisition_1C.coherent_integration_time_ms=1
Acquisition_1C.pfa=0.01
Acquisition_1C.doppler_max=5000
Acquisition_1C.doppler_step=250
Acquisition_1C.max_dwells=1
Acquisition_1C.dump=false
Acquisition_1C.dump_filename=./acq_dump.dat
;######### TRACKING GLOBAL CONFIG ############
Tracking_1C.implementation=GPS_L1_CA_DLL_PLL_Tracking
Tracking_1C.item_type=gr_complex
Tracking_1C.extend_correlation_symbols=10
Tracking_1C.early_late_space_chips=0.5
Tracking_1C.early_late_space_narrow_chips=0.15
Tracking_1C.pll_bw_hz=40
Tracking_1C.dll_bw_hz=2.0
Tracking_1C.pll_bw_narrow_hz=5.0
Tracking_1C.dll_bw_narrow_hz=1.50
Tracking_1C.fll_bw_hz=10
Tracking_1C.enable_fll_pull_in=true
Tracking_1C.enable_fll_steady_state=false
Tracking_1C.dump=false
Tracking_1C.dump_filename=tracking_ch_
;######### TELEMETRY DECODER GPS CONFIG ############
TelemetryDecoder_1C.implementation=GPS_L1_CA_Telemetry_Decoder
TelemetryDecoder_1C.dump=false
;######### OBSERVABLES CONFIG ############
Observables.implementation=Hybrid_Observables
Observables.dump=false
Observables.dump_filename=./observables.dat
;######### PVT CONFIG ############
PVT.implementation=RTKLIB_PVT
;PVT.positioning_mode=Single
;PVT.positioning_mode=Static
;PVT.positioning_mode=PPP_Kinematic
PVT.positioning_mode=PPP_Static
PVT.output_rate_ms=100
PVT.display_rate_ms=500
PVT.iono_model=Broadcast
;PVT.iono_model=IonoFree-LC
PVT.trop_model=Saastamoinen
PVT.flag_rtcm_server=true
PVT.flag_rtcm_tty_port=false
;PVT.rtcm_dump_devname=/dev/pts/1
PVT.rtcm_tcp_port=2101
PVT.rtcm_MT1019_rate_ms=5000
PVT.rtcm_MT1077_rate_ms=1000
;PVT.rtcm_station_id=1111
PVT.rinex_version=2
; gnss-sdr-monitor
PVT.enable_monitor=true
;PVT.monitor_client_addresses=192.168.110.69
;PVT.monitor_client_addresses=127.0.0.1_192.168.110.69
PVT.monitor_client_addresses=127.0.0.1
PVT.monitor_udp_port=1111
;PVT.nmea_dump_filename=./gnss_sdr_pvt.nmea
PVT.flag_nmea_tty_port=true
;PVT.nmea_dump_devname=/dev/pts/11
;PVT.nmea_dump_devname=/dev/ptmx
;PVT.dynamics_model=1
;PVT.enable_rx_clock_correction=false
;PVT.max_clock_offset_ms=40
;PVT.code_phase_error_ratio_l1=100
;PVT.raim_fde=0
;PVT.reject_GPS_IIA=1
;PVT.phwindup=1
;PVT.earth_tide=1
;PVT.output_enabled=true
;PVT.rtcm_output_file_enabled=false
;PVT.gpx_output_enabled=false
;PVT.geojson_output_enabled=false
;PVT.kml_output_enabled=false
;PVT.xml_output_enabled=false
;PVT.rinex_output_enabled=false
;PVT.nmea_output_file_enabled=false
;PVT.rtcm_MT1045_rate_ms=5000
;PVT.rtcm_MSM_rate_ms=1000
;PVT.rtcm_MT1097_rate_ms=1000
;PVT.output_path=./
;PVT.dump=false
;PVT.dump_filename=./pvt.dat
;PVT.enable_monitor_ephemeris=true
;PVT.monitor_ephemeris_client_addresses=127.0.0.1
;PVT.monitor_ephemeris_udp_port=1234
;PVT.enable_protobuf=false
;######### MONITOR CONFIG ############
Monitor.enable_monitor=true
Monitor.decimation_factor=1
;Monitor.client_addresses=192.168.110.69
Monitor.client_addresses=127.0.0.1
Monitor.udp_port=1112