// board enforces
//   in-state
//      accel set/resume
//   out-state
//      cancel button
//      regen paddle
//      accel rising edge
//      brake rising edge
//      brake > 0mph

const int GM_MAX_STEER = 300;
const int GM_MAX_RT_DELTA = 128;          // max delta torque allowed for real time checks
const uint32_t GM_RT_INTERVAL = 250000;    // 250ms between real time checks
const int GM_MAX_RATE_UP = 7;
const int GM_MAX_RATE_DOWN = 17;
const int GM_DRIVER_TORQUE_ALLOWANCE = 50;
const int GM_DRIVER_TORQUE_FACTOR = 4;
const int GM_MAX_GAS = 3072;
const int GM_MAX_REGEN = 1404;
const int GM_MAX_BRAKE = 350;
const CanMsg GM_TX_MSGS[] = {{384, 0, 4}, {1033, 0, 7}, {1034, 0, 7}, {715, 0, 8}, {880, 0, 6},  // pt bus
                             {161, 1, 7}, {774, 1, 8}, {776, 1, 7}, {784, 1, 2},   // obs bus
                             {789, 2, 5},  // ch bus
                             {0x104c006c, 3, 3}, {0x10400060, 3, 5}};  // gmlan

// TODO: do checksum and counter checks. Add correct timestep, 0.1s for now.
AddrCheckStruct gm_addr_checks[] = {
  {.msg = {{388, 0, 8, .expected_timestep = 100000U}, { 0 }, { 0 }}},
  {.msg = {{842, 0, 5, .expected_timestep = 100000U}, { 0 }, { 0 }}},
  {.msg = {{481, 0, 7, .expected_timestep = 100000U}, { 0 }, { 0 }}},
  {.msg = {{201, 0, 8, .expected_timestep = 100000U}, { 0 }, { 0 }}},
  {.msg = {{452, 0, 8, .expected_timestep = 100000U}, { 0 }, { 0 }}},
};
#define GM_RX_CHECK_LEN (sizeof(gm_addr_checks) / sizeof(gm_addr_checks[0]))
addr_checks gm_rx_checks = {gm_addr_checks, GM_RX_CHECK_LEN};


enum {
  GM_BTN_UNPRESS = 1,
  GM_BTN_RESUME = 2,
  GM_BTN_SET = 3,
  GM_BTN_CANCEL = 6,
};

static int gm_rx_hook(CANPacket_t *to_push) {

  bool valid = addr_safety_check(to_push, &gm_rx_checks, NULL, NULL, NULL);

  if (valid && (GET_BUS(to_push) == 0U)) {
    int addr = GET_ADDR(to_push);

    if (addr == 388) {
      int torque_driver_new = ((GET_BYTE(to_push, 6) & 0x7U) << 8) | GET_BYTE(to_push, 7);
      torque_driver_new = to_signed(torque_driver_new, 11);
      // update array of samples
      update_sample(&torque_driver, torque_driver_new);
    }

    // sample speed, really only care if car is moving or not
    // rear left wheel speed
    if (addr == 842) {
      vehicle_moving = GET_BYTE(to_push, 0) | GET_BYTE(to_push, 1);
    }

    // ACC steering wheel buttons
    if (addr == 481) {
      int button = (GET_BYTE(to_push, 5) & 0x70U) >> 4;

      // exit controls on cancel press
      if (button == GM_BTN_CANCEL) {
        controls_allowed = 0;
      }

      // enter controls on falling edge of set or resume
      bool set = (button == GM_BTN_UNPRESS) && (cruise_button_prev == GM_BTN_SET);
      bool res = (button == GM_BTN_UNPRESS) && (cruise_button_prev == GM_BTN_RESUME);
      if (set || res) {
        controls_allowed = 1;
      }

      cruise_button_prev = button;
    }

    if (addr == 201) {
      brake_pressed = GET_BIT(to_push, 40U) != 0U;
    }

    if (addr == 452) {
      gas_pressed = GET_BYTE(to_push, 5) != 0U;
    }

    // exit controls on regen paddle
    if (addr == 189) {
      bool regen = GET_BYTE(to_push, 0) & 0x20U;
      if (regen) {
        controls_allowed = 0;
      }
    }

    // Check if ASCM or LKA camera are online
    // on powertrain bus.
    // 384 = ASCMLKASteeringCmd
    // 715 = ASCMGasRegenCmd
    generic_rx_checks(((addr == 384) || (addr == 715)));
  }
  return valid;
}

// all commands: gas/regen, friction brake and steering
// if controls_allowed and no pedals pressed
//     allow all commands up to limit
// else
//     block all commands that produce actuation

static int gm_tx_hook(CANPacket_t *to_send) {

  int tx = 1;
  int addr = GET_ADDR(to_send);

  if (!msg_allowed(to_send, GM_TX_MSGS, sizeof(GM_TX_MSGS)/sizeof(GM_TX_MSGS[0]))) {
    tx = 0;
  }

  // disallow actuator commands if gas or brake (with vehicle moving) are pressed
  // and the the latching controls_allowed flag is True
  int pedal_pressed = brake_pressed_prev && vehicle_moving;
  bool alt_exp_allow_gas = alternative_experience & ALT_EXP_DISABLE_DISENGAGE_ON_GAS;
  if (!alt_exp_allow_gas) {
    pedal_pressed = pedal_pressed || gas_pressed_prev;
  }
  bool current_controls_allowed = controls_allowed && !pedal_pressed;

  // BRAKE: safety check
  if (addr == 789) {
    int brake = ((GET_BYTE(to_send, 0) & 0xFU) << 8) + GET_BYTE(to_send, 1);
    brake = (0x1000 - brake) & 0xFFF;
    if (!current_controls_allowed) {
      if (brake != 0) {
        tx = 0;
      }
    }
    if (brake > GM_MAX_BRAKE) {
      tx = 0;
    }
  }

  // LKA STEER: safety check
  if (addr == 384) {
    int desired_torque = ((GET_BYTE(to_send, 0) & 0x7U) << 8) + GET_BYTE(to_send, 1);
    uint32_t ts = microsecond_timer_get();
    bool violation = 0;
    desired_torque = to_signed(desired_torque, 11);

    if (current_controls_allowed) {

      // *** global torque limit check ***
      violation |= max_limit_check(desired_torque, GM_MAX_STEER, -GM_MAX_STEER);

      // *** torque rate limit check ***
      violation |= driver_limit_check(desired_torque, desired_torque_last, &torque_driver,
        GM_MAX_STEER, GM_MAX_RATE_UP, GM_MAX_RATE_DOWN,
        GM_DRIVER_TORQUE_ALLOWANCE, GM_DRIVER_TORQUE_FACTOR);

      // used next time
      desired_torque_last = desired_torque;

      // *** torque real time rate limit check ***
      violation |= rt_rate_limit_check(desired_torque, rt_torque_last, GM_MAX_RT_DELTA);

      // every RT_INTERVAL set the new limits
      uint32_t ts_elapsed = get_ts_elapsed(ts, ts_last);
      if (ts_elapsed > GM_RT_INTERVAL) {
        rt_torque_last = desired_torque;
        ts_last = ts;
      }
    }

    // no torque if controls is not allowed
    if (!current_controls_allowed && (desired_torque != 0)) {
      violation = 1;
    }

    // reset to 0 if either controls is not allowed or there's a violation
    if (violation || !current_controls_allowed) {
      desired_torque_last = 0;
      rt_torque_last = 0;
      ts_last = ts;
    }

    if (violation) {
      tx = 0;
    }
  }

  // GAS/REGEN: safety check
  if (addr == 715) {
    int gas_regen = ((GET_BYTE(to_send, 2) & 0x7FU) << 5) + ((GET_BYTE(to_send, 3) & 0xF8U) >> 3);
    // Disabled message is !engaged with gas
    // value that corresponds to max regen.
    if (!current_controls_allowed) {
      bool apply = GET_BYTE(to_send, 0) & 1U;
      if (apply || (gas_regen != GM_MAX_REGEN)) {
        tx = 0;
      }
    }
    if (gas_regen > GM_MAX_GAS) {
      tx = 0;
    }
  }

  // 1 allows the message through
  return tx;
}

static const addr_checks* gm_init(int16_t param) {
  UNUSED(param);
  controls_allowed = false;
  relay_malfunction_reset();
  return &gm_rx_checks;
}

const safety_hooks gm_hooks = {
  .init = gm_init,
  .rx = gm_rx_hook,
  .tx = gm_tx_hook,
  .tx_lin = nooutput_tx_lin_hook,
  .fwd = default_fwd_hook,
};