ts5x00: remember to set the active flag
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit is contained in:
parent
0244a9b2c7
commit
8766453dad
|
@ -43,7 +43,8 @@ Then install SYSLINUX in the mounted partition:
|
||||||
IMPORTANT: In order for the board to boot the Compact Flash with a recent
|
IMPORTANT: In order for the board to boot the Compact Flash with a recent
|
||||||
config, the BIOS must use Logical Block Addressing (LBA). You can do it by
|
config, the BIOS must use Logical Block Addressing (LBA). You can do it by
|
||||||
choosing "Ide 0: AUTOCONFIG, LBA" under "IDE DRIVE GEOMETRY" in the "Basic CMOS
|
choosing "Ide 0: AUTOCONFIG, LBA" under "IDE DRIVE GEOMETRY" in the "Basic CMOS
|
||||||
Configuration" screen. For details about the CMOS setup, please see:
|
Configuration" screen. Also, don't forget to set the 'active' (or 'bootable')
|
||||||
|
flag on partition 1. For details about the CMOS setup, please see:
|
||||||
http://wiki.embeddedarm.com/wiki/TS-5500#System_BIOS_Setup_Screens
|
http://wiki.embeddedarm.com/wiki/TS-5500#System_BIOS_Setup_Screens
|
||||||
|
|
||||||
Connect a terminal program to the rs232 connector marked "COM2"
|
Connect a terminal program to the rs232 connector marked "COM2"
|
||||||
|
|
Loading…
Reference in a new issue