Middleware to access a smart card using SCard API (PC/SC).
http://pcsclite.alioth.debian.org/
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Evtest is nowadays maintained as a seperate package by Peter Hutterer.
The project doesn't release any tarballs, so use the one of Fedora instead
so we don't need to autoreconf:
http://comments.gmane.org/gmane.comp.freedesktop.xorg.announce/1671
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the new filesystem utilities category and move a bunch of packages
into it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
mtdev2tuio is a simple application for converting touch events
to the standart TUIO 1.1 protocol.
https://github.com/olivopaolo/mtdev2tuio
[thomas.petazzoni@free-electrons.com: use TARGET_CONFIGURE_OPTS, fix
indentation, add dependency on thread support in toolchain]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
liblo is an implementation of the Open Sound Control protocol
for POSIX systems.
http://liblo.sourceforge.net/
[thomas.petazzoni@free-electrons.com: add dependency on thread support
in toolchain]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mtdev is a stand-alone library which transforms all variants
of kernel multitouch events to the slotted type B protocol.
http://bitmath.org/code/mtdev/
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
renamed package to 'gsl' to match upstream name.
added license information.]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
usb_modeswitch_data provides udev rules for usb VID/PID combinations to
switch usb deices from their default mode into a more useable mode. The
default mode usually is a cdrom with installation software that is of
little use in an embedded linux situation
Signed-off-by: J.C. Woltz <jwoltz@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
Fixup indentation of Config.in file.
Add 'depends on BR2_PACKAGE_PYTHON' so that the package does not
appear when the Python interpreter is not enabled.
Add license files information, but not the license tag: the package
includes software under multiple licenses.]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
Fixup indentation in the Config.in file.
Add 'select BR2_PACKAGE_PYTHON_PYEXPAT' which is needed to get XML
support in Python.
Add license information.]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
drop the --disable-static from configuration options, the default
behavior should work without problem.
make sure the pre configure hook is also executed for the host
variant of the package.
add the project upstream URL in the package help text
]
Signed-off-by: Stefan Froberg <stefan.froberg@petroprogram.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cpuload is a simple tool to obtain intuitive vision of CPU load
(including total, user, system, irq and softirq) within a certain
time, which is especially useful for embedded system without GUI.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
- add dependencies on the supported architectures to avoid build
failures on ARM and other unsupported arches
- add a patch that removes an useless warning about the kernel
version. This patch is present upstream. However since it modifies
configure.ac, we need to autoreconf the package.]
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
slightly adjust the installation process to just do a loop of calls
to $(INSTALL).]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
add patch that creates a standard setup.py file. This allows the
.pyc files to be generated at build time, and installed into the
target. This is important because by default, Buildroot removes all
.py files from the target, to keep only the .pyc files. The
python-nfc.mk file was changed to use this setup.py standard build
process.]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds the libnfc-llcp package.
This package requires a minium libnfc version of 1.6. A separate patch has
been submitted to bump the libnfc version; that patch should be regarded as
a prerequisite for the present patch.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
bwm-ng can monitor not only network bandwidth but also disk-io
bandwidth, so it is more appropriate to put bwm-ng into System tools.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: build using make instead of scons, fixup whitespace, target install]
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fix help text whitespace]
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
inadyn is a DynamicDNS client/updater which works with dyndns.com, noip.com
and many other DDNS providers. It is minimal in footprint and requirements,
supports IP caching, multiple providers, multiple domain names, and
a variety of other situations.
[Peter: fixup whitespace / trailing spaces]
Signed-off-by: Dave Purdy <david.c.purdy@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: Install into /usr/sbin]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It doesn't really need C++ support on Linux, but the configure script
checks for it (and fails if not available), and the package is not easy
to autoreconf as there's C++ source files for Android/Windows, causing
automake to fail if AC_PROG_CXX isn't set.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: add upstream URL, fix dep, drop explicit bluetooth option, no AUTORECONF]
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
