Even though jumping from 2.7.3 to 2.7.6 looks like a minor version
bump, it is in fact a fairly significant one, because a good number of
changes to help cross-compilation have been merged into Python
upstream. Therefore, most of our patches are affected by this change.
In detail, this commit:
* Renames all the patches to follow the naming convention of patches
in Buildroot: the patch file names should not have any version
number.
* The patches numbered above 100, that add configuration options to
disable certain modules of the Python standard library, are only
renamed and slightly adapted, they didn't change that much.
* The patches numbered below 100 are almost entirely rewritten: many
of the cross-compilation problems that used to exist in Python
2.7.3 no longer exist, and the number of remaining problems is
smaller, and can be fixed with smaller patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the upcoming bump of Python 2.x, it will become important that
the PYTHONPATH is passed whenever we build third-party packages, be
they using the distutils build mechanism, or the setuptools build
mechanism. This is because passing PYTHONPATH is what will allow
Python to find a special Python module that contains all the
compiler/library/headers definitions that are relevant when
cross-compiling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the Python package exposes its PYTHON_PATH variable, we can
use it in the package infrastructure. This prepares both the upcoming
bump of Python 2.x, and the introduction of Python 3 support in the
Python package infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As a preparation to make the Python infrastructure support both Python
and Python 3, as well as the bump of Python 2 and 3, we need the
Python package to expose the Python module path in a variable called
PYTHON_PATH. It will be used by the following commits.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch consolidates the URLs for various Freescale-supplied
packages to use FREESCALE_IMX_SITE.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be sure that host-autoconf dependency is already built move the
call to autogen.sh from SDL_POST_PATCH_HOOKS to SDL_PRE_CONFIGURE_HOOKS.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After the latest patches top-level parallel Makefile is working but
there is still an issue when a package has an unspecified optional
dependency so change the comment to explain that.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add '+' prefix to the $($(PKG)_BUILD_CMDS) and $($(PKG)_INSTALL*_CMDS)
commands to enable jobserver for the sub-make.
Without the '+' prefix GNU make does not detect the sub-make so it
disable the jobserver for the sub-make.
>From GNU make documentation:
Using the MAKE variable has the same effect as using a ‘+’ character
at the beginning of the recipe line. This special feature is only
enabled if the MAKE variable appears directly in the recipe: it does
not apply if the MAKE variable is referenced through expansion of
another variable. In the latter case you must use the ‘+’ token to get
these special effects.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be able to use top-level parallel make we must not depend in a rule
on the order of evaluation of the prerequisites, so instead of relyng on
the left to right ordering of evaluation of the prerequisites add an
explicit rule to describe the dependencies.
Add explicit rules to describe the following dependency chain:
$(TARGETS) -> target-finalize -> rootfs-* -> target-post-image
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be able to use top-level parallel make we must not depend in a rule
on the order of evaluation of the prerequisites, so instead of relying
on the left to right ordering of evaluation of the prerequisites add
an explicit rule to describe the dependencies.
We cannot use the pattern rules because they must have the same
dependency for every package, but we need to change the dependencies
depending on $(2)_OVERRIDE_SRCDIR variable value, so we must use a
more flexible way like $(2)_TARGET_% variables.
So add explicit dependencies for the following stamp files:
$(2)_TARGET_EXTRACT
$(2)_TARGET_PATCH
$(2)_TARGET_CONFIGURE
$(2)_TARGET_BUILD
$(2)_TARGET_INSTALL_STAGING
$(2)_TARGET_INSTALL_TARGET
$(2)_TARGET_INSTALL_IMAGES
$(2)_TARGET_INSTALL_HOST
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit makes the dependency from the target toolchain explicit.
This way we can buid from command line a package that use
inner-generic-package right after the configuration phase, example:
make clean <package-name>
Also remove TARGETS_ALL because the only purpose was to add toolchain
dependency so it's superseded by this commit.
To prevent circular dependency add the new variable
<pkgname>_ADD_TOOLCHAIN_DEPENDENCY to avoid adding the toolchain
dependency for toolchain packages.
This is also a step forward supporting top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move "dependencies" "dirs" "prepare" dependencies from "toolchain" to
every package.
This way we can build correctly every package right after the clean
stage.
As example with this commit we can build successfully the glibc right
after the clean stage:
make clean glibc
This is also a step forward supporting top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we are changing the default dbus user, make sure this user is
consistently created.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Change the download source to a Github repository which is more recent.
This patch also bump libatomic_ops version and remove a patch that is
now upstream.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
glibc 2.19 has been released recently
(https://sourceware.org/ml/libc-alpha/2014-02/msg00224.html). This
commit allows to build a toolchain with this new version. In order to
allow this, we add a version selection that did not exist for
glibc. We default to 2.18, which was the only supported version until
now, and add an option for 2.19.
For microblaze, which uses a specific glibc version, the version
selection choice is not displayed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 262a4c0bf7.
Compiler error has been fixed, and building this package doesn't cause an
ICE anymore.
Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch updates the /dev management section in the manual with information
about eudev, which replaces udev.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps systemd to v207 but also declares it as a provider for the
udev virtual package.
Starting with systemd 183, udev has been merged into
systemd. The udev daemon is now installed as /lib/systemd/systemd-udevd.
This means that /dev management using udev is only available if systemd
is chosen as init system.
When configuring systemd, the following options are available:
- activation of systemd-journal-gatewayd, to access the journal via
HTTP.
- activation of extra features like journal compression and sealing.
Support for uClibc has also been removed because:
- upstream has no interest in supporting uClibc.
- using a shrinked libc brings no advantage, given the size of all the
programs included in Systemd. So using glibc does not matter.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch converts udev to a virtual package. For the moment, there is only
one provider for the udev features: eudev.
Packages meant to provide udev-like features must select the symbol
BR2_PACKAGE_HAS_UDEV.
Packages depending on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV or
BR2_PACKAGE_UDEV have been converted to use the new symbol.
[Peter: move legacy symbols under 2014.05]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
eudev is a userspace device management daemon. It is a standalone
version, independent from systemd. It is a fork maintained by Gentoo.
Features:
- No extra configuration options are available: Gudev is build if
libglib2 is selected.
- No dependency on hwdata as the package uses its own hardware
database (as does systemd).
eudev 1.3 is in sync with systemd v207.
[Peter: add BR2_USE_MMU dependency]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adjust phpize and php-config to make them work for cross-compiled
external extensions.
While at it also fix dl* issues that prevent said extensions from
loading.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
20140129:
Minor bug fix in configs 19d2:0149 and 19d2:2000 (Lars Melin reported)
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Version 2.1.0, 2014/01/28
ATTENTION: -I flag meaning reversed, default is to skip SCSI inquiry;
introduction of StandardEject, replacing many MessageContents with the
same function, reducing size of device config files, and always including
the 'Allow Medium Removal' before ejecting (thanks to Lars Melin for
the idea); fix in "bulk_read", removing bogus CSW request (report from
"Sonya@zte")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version includes:
- add f2fstat tool
- critical bug fix on nat bitmaps
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Context:
The autobuilders were failing on the symbol _XData32 being in conflicts.
A patch had been added to SDL to add a check to the configure.in
Problem:
Sometimes, the build would fail, because of an _XData32 symbol being in
conflicts eventhrough the patch was here.
What was happening:
Following the classic buildroot workflow:
- Extract
- [...]
- Apply 001 patch, which touches configure.in AND configure
- Apply 002 patch, which touches configure.in
- Invoke autogen.sh
- [...]
Right before running autogen.sh, we have configure.in which is more
recent than configure, which is fine.
We then, execute autogen.sh which, basically, runs autoconf.
If your machine was lighty loaded, the time difference between
configure.in and configure was really tiny (ms order), which seems to be
neglected by autoconf.
The results was that the configure was *NOT* generated. And our second
patch was not taken into account.
If your machine was under heavy load, the time difference between the
two files would have been greater and then *maybe* picked up by
autoconf. And then the configure file was re-generated.
When the 0001 patch was introduced, SDL package did *NOT* run it's
autogen.sh, which is why it touches also the configure.
This came later, causing this behavior.
Fixes:
http://autobuild.buildroot.net/results/d1c/d1c36f634dbf6b6e5d18444c2a23dfd129202b80/
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
