Use tar.gz archive (tar.bz2 is not available since 3.2.17)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to target/mips/TODO in the Qemu sources:
MIPS64
------
- Userland emulation (both n32 and n64) not functional.
And indeed, trying to run a mips64n32 binary under qemu user emulation
results in:
Invalid ELF image for this architecture
So we move the BR2_mips64(el) dependency from
BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS to
BR2_PACKAGE_HOST_QEMU_SYSTEM_ARCH_SUPPORTS, so that only the system
emulation is available on mips64, and not the user-mode emulation.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Not all architectures are supported by both the system emulation and
user-mode emulation in Qemu, so a single
BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS doesn't work very well.
Therefore, this commit introduces the
BR2_PACKAGE_HOST_QEMU_{SYSTEM,USER}_ARCH_SUPPORTS hidden options. We
keep the BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS option for the (numerous)
architectures supported by both system emulation and user-mode
emulation.
The 'select' logic to make sure that at least either system emulation
or user-mode emulation is selected is reworked, and done carefully to
avoid recursive Kconfig dependencies.
For now BR2_PACKAGE_HOST_QEMU_SYSTEM_ARCH_SUPPORTS and
BR2_PACKAGE_HOST_QEMU_USER_ARCH_SUPPORTS are the same, but they will
become different in a follow-up commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since Linux 3.10, perf's NO_NEWT configuration option simply sets
NO_SLANG=1 and there is no dependency on libnewt.
We already handle NO_SLANG correctly based on whether or not
BR2_PACKAGE_SLANG is selected, so all we accomplish by setting NO_NEWT=1
is disabling perf's TUI when all of the dependencies are available.
To simplify all of this, introduce a new config option to enable the
perf TUI which depends on slang and add a check to prevent building the
TUI on versions which are too old. The check for NO_SLANG is equivalent
to checking if NO_NEWT is required as NO_SLANG was added in the same
commit that removed the libnewt dependency and deprecated NO_NEWT
(6692c262df4f, "perf tools: Remove dependency on libnewt", 2013-03-28).
Signed-off-by: John Keeping <john@metanate.com>
[Thomas: add missing BR2_USE_MMU dependency, coming from the slang
package. Noticed by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This tool might be useful on Android devices modded with Buildroot. Indeed
it allows to modify Android Boot Image partition directly from running
rootfs and so let the user free to keep Android stuff on his device
(mainly bootloader) while testing/using Buildroot kernel/rootfs.
For example, one can modify kernel cmdline on Boot Image partition and
tell Android bootloader to launch kernel with a given rootfs fitted with BR
instead of Android's one.
Build-tested with ./utils/test-pkg -p abootimg -c config.abootimg -a
with config.abootimg containing:
BR2_USE_MMU=y
BR2_PACKAGE_ABOOTIMG=y
BR2_PACKAGE_UTIL_LINUX=y
BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y
armv5-ctng-linux-gnueabi [ 1/47]: OK
armv7-ctng-linux-gnueabihf [ 2/47]: OK
br-aarch64-glibc [ 3/47]: OK
br-arcle-hs38 [ 4/47]: OK
br-arm-basic [ 5/47]: OK
br-arm-cortex-a9-glibc [ 6/47]: OK
br-arm-cortex-a9-musl [ 7/47]: OK
br-arm-cortex-m4-full [ 8/47]: SKIPPED
br-arm-full [ 9/47]: OK
br-arm-full-nothread [10/47]: OK
br-arm-full-static [11/47]: OK
br-bfin-full [12/47]: SKIPPED
br-i386-pentium4-full [13/47]: OK
br-i386-pentium-mmx-musl [14/47]: OK
br-m68k-5208-full [15/47]: SKIPPED
br-m68k-68040-full [16/47]: OK
br-microblazeel-full [17/47]: OK
br-mips32r6-el-hf-glibc [18/47]: OK
br-mips64-n64-full [19/47]: OK
br-mips64r6-el-hf-glibc [20/47]: OK
br-mipsel-o32-full [21/47]: OK
br-nios2-glibc [22/47]: OK
br-openrisc-uclibc [23/47]: OK
br-powerpc-603e-basic-cpp [24/47]: OK
br-powerpc64le-power8-glibc [25/47]: OK
br-powerpc64-power7-glibc [26/47]: OK
br-powerpc-e500mc-full [27/47]: OK
br-sh4-full [28/47]: OK
br-sparc64-glibc [29/47]: OK
br-sparc-uclibc [30/47]: OK
br-x86-64-core2-full [31/47]: OK
br-x86-64-musl [32/47]: OK
br-xtensa-full [33/47]: OK
i686-ctng-linux-gnu [34/47]: OK
linaro-aarch64 [35/47]: OK
linaro-arm [36/47]: OK
mips64el-ctng_n32-linux-gnu [37/47]: OK
mips64el-ctng_n64-linux-gnu [38/47]: OK
powerpc-ctng_e500v2-linux-gnuspe [39/47]: OK
sourcery-arm-armv4t [40/47]: OK
sourcery-arm [41/47]: OK
sourcery-arm-thumb2 [42/47]: OK
sourcery-mips64 [43/47]: OK
sourcery-mips [44/47]: OK
sourcery-nios2 [45/47]: OK
sourcery-x86-64 [46/47]: OK
x86_64-ctng_locales-linux-gnu [47/47]: OK
47 builds, 3 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[Thomas: fix license.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch provides Clang tools and libraries for the host and
libclang for the target.
host-clang is needed to build libclc, which is provided in a follow-up
patch.
We need libclang for the target because it is used by most of OpenCL
implementations.
A later patch in this series will enable Clover, the OpenCL
implementation part of Mesa3D, which requires libclang.
clang-tblgen must be copied to HOST_DIR as it is not installed by
default but is needed for cross-compilation:
http://lists.llvm.org/pipermail/cfe-dev/2015-June/043318.html
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
[Thomas:
- Add Config.in comment about BR2_TOOLCHAIN_HAS_GCC_BUG_64735
- Minor reformatting/rewrapping of comments in .mk file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A backport of the Python 3 subprocess module for use on Python 2.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The website advertises a favicon in PNG format, but we don't actually
provide one. From docs/website/header.html:
<link rel="shortcut icon" href="images/favicon.png">
So add one. Generated by:
convert -geometry 32x32! docs/website/images/logo_small.png \
docs/website/favicon.png
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The clipboard javascript code causes an error:
Uncaught TypeError: Illegal constructor
at buildroot.js:58
Which is caused by a recent change in upstream clipboard.js:
https://github.com/zenorocha/clipboard.js/releases/tag/v2.0.0
Changes constructor from new Clipboard() to new ClipboardJS()
The issue was that we were using the master version of clipboard.js instead
of a specific release. Fix it by using the 1.7.1 version (latest release
before the constructor change) instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A tiny library to facilitate visitor implementation in Python
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Library to enable your code run as a daemon process on Unix-like
systems.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If one wants to use GDB with python support on the target, you need the support
files installed by GDB. These get usually deleted to save some space, so I just
wrapped the Makefile code deleting them in a conditional block depending on if
python support is active or not.
Signed-off-by: Jonas Zaddach <jzaddach@cisco.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- use positive logic "if python is disabled"
- put the comment inside the condition, as suggested by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This script causes a large number of flake8 warnings, is rarely used
(but even never used), and is going to be replaced at some point by
the improved pkg-stats that will give details about the upstream
version available for all packages, not just X.org packages.
Therefore, let's drop the xorg-release script in order to silence all
those flake8 warnings:
support/scripts/xorg-release:36:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:58:27: E201 whitespace after '{'
support/scripts/xorg-release:58:44: E203 whitespace before ':'
support/scripts/xorg-release:58:54: E202 whitespace before '}'
support/scripts/xorg-release:63:1: E305 expected 2 blank lines after class or function definition, found 1
support/scripts/xorg-release:64:15: E261 at least two spaces before inline comment
support/scripts/xorg-release:67:32: E261 at least two spaces before inline comment
support/scripts/xorg-release:86:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:95:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:107:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:115:20: W601 .has_key() is deprecated, use 'in'
support/scripts/xorg-release:123:34: E201 whitespace after '{'
support/scripts/xorg-release:124:46: E203 whitespace before ':'
support/scripts/xorg-release:124:50: E202 whitespace before '}'
support/scripts/xorg-release:127:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:141:15: W601 .has_key() is deprecated, use 'in'
support/scripts/xorg-release:146:21: W601 .has_key() is deprecated, use 'in'
support/scripts/xorg-release:176:1: E305 expected 2 blank lines after class or function definition, found 1
support/scripts/xorg-release:180:1: W391 blank line at end of file
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CMake < 3.11 doesn't support add_library() without any source file
(i.e add_library(foo SHARED)). But flann CMake use a trick that use
an empty string "" as source list (i.e add_library(foo SHARED "")).
This look like a bug in CMake < 3.11.
With CMake >= 3.11, the new behaviour of add_library() break the
existing flann CMake code.
>From CMake Changelog [1]:
"add_library() and add_executable() commands can now be called without
any sources and will not complain as long as sources are added later
via the target_sources() command."
Note: flann CMake code doesn't use target_sources() since no source file
are provided intentionally since the flann shared library is created by
linking with the flann_cpp_s static library with this line:
target_link_libraries(flann_cpp -Wl,-whole-archive flann_cpp_s -Wl,-no-whole-archive)
If you try to use "add_library(flann_cpp SHARED ${CPP_SOURCES})" (as it should
be normally done), the link fail due to already defined symbol.
They are building the shared version using the static library "to speedup the
build time" [3]
This issue is already reported upstream [2] with a proposed solution.
Fixes:
http://autobuild.buildroot.net/results/b2f/b2febfaf8c44ce477b3e4a5b9b976fd25e8d7454
[1] https://cmake.org/cmake/help/v3.11/release/3.11.html
[2] https://github.com/mariusmuja/flann/issues/369
[3] 0fd62b43be
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Davide Viti <zinosat@tiscali.it>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added license hash, switched _UPSTREAM to an upstream directory which
also contains older release tarballs.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add patch to split libzstd install target into pc, static, shared and
includes target. Call only the needed ones for the buildroot
staging/target install steps (respect the static/shared
configuration).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: as suggested by Yann E. Morin, refactor the build/install
commands to use only one invocation, with intermediate ZSTD_BUILD_LIBS
and ZSTD_INSTALL_LIBS variables, defined depending on whether
static/shared/static+shared is selected.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For the host only the libzstd library is built (no need for host-lz4
host-xz host-zlib dependencies because they affect only the cmdline
tool).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: use '-C $(@D)/lib' instead of '-C $(@D) lib' at build time,
to be consistent with what is done at install time, as suggested by
Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-9234: Unenforced configuration allows for apparently
valid certifications actually signed by signing subkeys.
Remove --disable-doc from configure options. We pass this options to all
autotools packages.
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When libpcap itself is linked against other libraries, reaver fails to
build as it doesn't link with libpcap dependencies. This patch fixes
that by using the pcap-config program.
Fixes:
http://autobuild.buildroot.net/results/899fd633288d5cd5aa221413cded857e4f743194/
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Version 0.4 supports bootloader updates to eMMC boot partitions.
Signed-off-by: Jim Brennan <jbrennan@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default, the builsystem for uboot defaults to 'legacy', while the
default version is very well capable of using the 'kconfig' buildsystem
instead.
Having the 'legacy' buildsystem be the default in that case makes it
quite inconvenient for users: they would expect to be able to use e.g.
uboot-menuconfig et al. with the default uboot version.
Switch to using 'kconfig' when we use the latest version. Keep the
'legacy' as default for everything else.
Also, invert the 'legacy' and 'kconfig' entries in the choice: it is
nicer to have the recent and future-proof entry first.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The version of the ARM Trusted Firmware from Marvell was a Git branch,
not a Git commit, leading to unreproducible results. So let's use a
Git commit instead, which is the latest available from the branch that
was previously used.
More specifically, this branch has recently seen a fix that is needed
for ATF to build properly with recent gcc versions:
c96ec59f8b
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The version of the ARM Trusted Firmware from Marvell was a Git branch,
not a Git commit, leading to unreproducible results. So let's use a
Git commit instead, which is the latest available from the branch that
was previously used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test case currently fails to build with:
./build/juno/release/bl1/context_mgmt.o: In function `cm_prepare_el3_exit':
context_mgmt.c:(.text.cm_prepare_el3_exit+0x54): undefined reference to `cm_set_next_context'
context_mgmt.c:(.text.cm_prepare_el3_exit+0x54): relocation truncated to fit: R_AARCH64_JUMP26 against undefined symbol `cm_set_next_context'
This issue has been fixed upstream in commit
10c252c14b7f446c0b49ef1aafbd5d37804577dd, available since v1.3. So
while we bump, let's bump to the latest version of ATF, v1.5.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/64360659
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
