jebbatime
/
jebbatime
1
0
Fork 0
Code Releases 3 Activity

tools: ota-dfu: Include a Linux-native OTA DFU tool

pull/24/head
Daniel Thompson 2020-04-26 19:18:17 +01:00
parent 5ce0d4cd6f
commit 17a8cfc346
3 changed files with 19 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
.gitmodules vendored
View File

@ -19,3 +19,6 @@
[submodule "tools/micropython-font-to-py"]
path = tools/micropython-font-to-py
url = https://github.com/peterhinch/micropython-font-to-py
[submodule "tools/ota-dfu"]
path = tools/ota-dfu
url = https://github.com/daniel-thompson/ota-dfu-python

21
README.md
View File

@ -51,12 +51,15 @@ Note: *If you have a new PineTime then it will have been delivered with
flash protection enabled. You must disable the flash protection before
trying to program it.*
* Use an SWD programmer to install `bootloader.hex` to the PineTime.
This file is an Intel HEX file containing both the bootloader and
the Nordic SoftDevice. Be careful to disconnect cleanly from the
debug software since just pulling out the SWD cable will mean the
nRF52 will still believe it is being debugged (and won't properly
enter deep sleep modes).
Use an SWD programmer to install `bootloader.hex` to the PineTime. This
file is an Intel HEX file containing both the bootloader and the Nordic
SoftDevice. Be careful to disconnect cleanly from the debug software
since just pulling out the SWD cable will mean the nRF52 will still
believe it is being debugged (and won't properly enter deep sleep
modes).
To install using Android device:
* Copy `micropython.zip` to your Android device and download nRF Connect
for Android if you do not already have it.
* In nRF Connect, choose settings and reduce the DFU packet count from
@ -64,6 +67,12 @@ trying to program it.*
* Connect to PineDFU using nRFConnect, click the DFU button and send
`micropython.zip` to the device.
To install using Linux and ota-dfu:
* Look up the MAC address for your watch (try: `sudo hcitool lescan`).
* Use ota-dfu to upload `micropython.zip` to the device. For example:
`tools/ota-dfu/dfu.py -z micropython.zip -a A0:B1:C2:D3:E3:F5 --legacy`
At the end of this process your watch will show the time (03:00) together
with a date and battery meter. When the watch goes into power saving mode
you can use the side button to wake it again.

1
tools/ota-dfu 160000

@ -0,0 +1 @@
Subproject commit 9cc61db89ec80ddbdc7a1ecee605cb5d4c391e19