jebbatime
/
micropython
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Implement crude but functional CDC + MSC USB device.

osx
Damien 2013-10-13 19:02:15 +01:00
parent ed65605edc
commit fee89d520f
21 changed files with 787 additions and 1638 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
stm/Makefile
View File

@ -9,7 +9,7 @@ LD = arm-none-eabi-ld
CFLAGS_CORTEX_M4 = -mthumb -mtune=cortex-m4 -mabi=aapcs-linux -mcpu=cortex-m4 -mfloat-abi=hard -DSTM32F40XX -DHSE_VALUE=8000000
CFLAGS = -I. -I$(PYSRC) -I$(FATFSSRC) -I$(STMSRC) -Wall -ansi -std=gnu99 -Os -DNDEBUG $(CFLAGS_CORTEX_M4)
CFLAGS_PY = -DEMIT_ENABLE_THUMB
LDFLAGS = --nostdlib -T stm.ld
LDFLAGS = --nostdlib -T stm32f405.ld
SRC_C = \
main.c \
@ -63,10 +63,9 @@ SRC_STM = \
usbd_req.c \
usbd_usr.c \
usbd_desc.c \
usbd_cdc_core.c \
usbd_pyb_core.c \
usbd_cdc_vcp.c \
usbd_msc_bot.c \
usbd_msc_core.c \
usbd_msc_data.c \
usbd_msc_scsi.c \
usbd_storage_msd.c \

4
stm/lib/usb_conf.h
View File

@ -170,9 +170,9 @@
#ifdef USB_OTG_FS_CORE
#define RX_FIFO_FS_SIZE 128
#define TX0_FIFO_FS_SIZE 32
#define TX1_FIFO_FS_SIZE 128
#define TX1_FIFO_FS_SIZE 64
#define TX2_FIFO_FS_SIZE 32
#define TX3_FIFO_FS_SIZE 0
#define TX3_FIFO_FS_SIZE 64
// #define USB_OTG_FS_LOW_PWR_MGMT_SUPPORT
// #define USB_OTG_FS_SOF_OUTPUT_ENABLED

105
stm/lib/usbd_cdc_conf.h
View File

@ -1,105 +0,0 @@
/**
******************************************************************************
* @file usbd_conf.h
* @author MCD Application Team
* @version V1.1.0
* @date 19-March-2012
* @brief USB Device configuration file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_VCP_CONF__H__
#define __USBD_VCP_CONF__H__
/* Includes ------------------------------------------------------------------*/
#include "usb_conf.h"
/** @defgroup USB_CONF_Exported_Defines
* @{
*/
//#define USBD_CFG_MAX_NUM 1
//#define USBD_ITF_MAX_NUM 1
//#define USBD_SELF_POWERED
/** @defgroup USB_VCP_Class_Layer_Parameter
* @{
*/
#define CDC_IN_EP 0x81 /* EP1 for data IN */
#define CDC_OUT_EP 0x01 /* EP1 for data OUT */
#define CDC_CMD_EP 0x82 /* EP2 for CDC commands */
/* CDC Endpoints parameters: you can fine tune these values depending on the needed baudrates and performance. */
#ifdef USE_USB_OTG_HS
#define CDC_DATA_MAX_PACKET_SIZE 512 /* Endpoint IN & OUT Packet size */
#define CDC_CMD_PACKET_SZE 8 /* Control Endpoint Packet size */
#define CDC_IN_FRAME_INTERVAL 40 /* Number of micro-frames between IN transfers */
#define APP_RX_DATA_SIZE 2048 /* Total size of IN buffer:
APP_RX_DATA_SIZE*8/MAX_BAUDARATE*1000 should be > CDC_IN_FRAME_INTERVAL*8 */
#else
#define CDC_DATA_MAX_PACKET_SIZE 64 /* Endpoint IN & OUT Packet size */
#define CDC_CMD_PACKET_SZE 8 /* Control Endpoint Packet size */
#define CDC_IN_FRAME_INTERVAL 5 /* Number of frames between IN transfers */
#define APP_RX_DATA_SIZE 2048 /* Total size of IN buffer:
APP_RX_DATA_SIZE*8/MAX_BAUDARATE*1000 should be > CDC_IN_FRAME_INTERVAL */
#endif /* USE_USB_OTG_HS */
#define APP_FOPS VCP_fops
/**
* @}
*/
/** @defgroup USB_CONF_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup USB_CONF_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USB_CONF_Exported_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USB_CONF_Exported_FunctionsPrototype
* @{
*/
/**
* @}
*/
#endif //__USBD_VCP_CONF__H__
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

818
stm/lib/usbd_cdc_core.c
View File

@ -1,818 +0,0 @@
/**
******************************************************************************
* @file usbd_cdc_core.c
* @author MCD Application Team
* @version V1.1.0
* @date 19-March-2012
* @brief This file provides the high layer firmware functions to manage the
* following functionalities of the USB CDC Class:
* - Initialization and Configuration of high and low layer
* - Enumeration as CDC Device (and enumeration for each implemented memory interface)
* - OUT/IN data transfer
* - Command IN transfer (class requests management)
* - Error management
*
* @verbatim
*
* ===================================================================
* CDC Class Driver Description
* ===================================================================
* This driver manages the "Universal Serial Bus Class Definitions for Communications Devices
* Revision 1.2 November 16, 2007" and the sub-protocol specification of "Universal Serial Bus
* Communications Class Subclass Specification for PSTN Devices Revision 1.2 February 9, 2007"
* This driver implements the following aspects of the specification:
* - Device descriptor management
* - Configuration descriptor management
* - Enumeration as CDC device with 2 data endpoints (IN and OUT) and 1 command endpoint (IN)
* - Requests management (as described in section 6.2 in specification)
* - Abstract Control Model compliant
* - Union Functional collection (using 1 IN endpoint for control)
* - Data interface class
* @note
* For the Abstract Control Model, this core allows only transmitting the requests to
* lower layer dispatcher (ie. usbd_cdc_vcp.c/.h) which should manage each request and
* perform relative actions.
*
* These aspects may be enriched or modified for a specific user application.
*
* This driver doesn't implement the following aspects of the specification
* (but it is possible to manage these features with some modifications on this driver):
* - Any class-specific aspect relative to communication classes should be managed by user application.
* - All communication classes other than PSTN are not managed
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_cdc_core.h"
#include "usbd_desc.h"
#include "usbd_req.h"
#include "usbd_cdc_conf.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup usbd_cdc
* @brief usbd core module
* @{
*/
/** @defgroup usbd_cdc_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup usbd_cdc_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup usbd_cdc_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup usbd_cdc_Private_FunctionPrototypes
* @{
*/
/*********************************************
CDC Device library callbacks
*********************************************/
static uint8_t usbd_cdc_Init (void *pdev, uint8_t cfgidx);
static uint8_t usbd_cdc_DeInit (void *pdev, uint8_t cfgidx);
static uint8_t usbd_cdc_Setup (void *pdev, USB_SETUP_REQ *req);
static uint8_t usbd_cdc_EP0_RxReady (void *pdev);
static uint8_t usbd_cdc_DataIn (void *pdev, uint8_t epnum);
static uint8_t usbd_cdc_DataOut (void *pdev, uint8_t epnum);
static uint8_t usbd_cdc_SOF (void *pdev);
/*********************************************
CDC specific management functions
*********************************************/
static void Handle_USBAsynchXfer (void *pdev);
static uint8_t *USBD_cdc_GetCfgDesc (uint8_t speed, uint16_t *length);
#ifdef USE_USB_OTG_HS
static uint8_t *USBD_cdc_GetOtherCfgDesc (uint8_t speed, uint16_t *length);
#endif
/**
* @}
*/
/** @defgroup usbd_cdc_Private_Variables
* @{
*/
extern CDC_IF_Prop_TypeDef APP_FOPS;
extern uint8_t USBD_DeviceDesc [USB_SIZ_DEVICE_DESC];
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma data_alignment=4
#endif
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
__ALIGN_BEGIN uint8_t usbd_cdc_CfgDesc [USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END ;
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma data_alignment=4
#endif
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
__ALIGN_BEGIN uint8_t usbd_cdc_OtherCfgDesc [USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END ;
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma data_alignment=4
#endif
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
__ALIGN_BEGIN static __IO uint32_t usbd_cdc_AltSet __ALIGN_END = 0;
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma data_alignment=4
#endif
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
__ALIGN_BEGIN uint8_t USB_Rx_Buffer [CDC_DATA_MAX_PACKET_SIZE] __ALIGN_END ;
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma data_alignment=4
#endif
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
__ALIGN_BEGIN uint8_t APP_Rx_Buffer [APP_RX_DATA_SIZE] __ALIGN_END ;
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma data_alignment=4
#endif
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
__ALIGN_BEGIN uint8_t CmdBuff[CDC_CMD_PACKET_SZE] __ALIGN_END ;
uint32_t APP_Rx_ptr_in = 0;
uint32_t APP_Rx_ptr_out = 0;
uint32_t APP_Rx_length = 0;
uint8_t USB_Tx_State = 0;
static uint32_t cdcCmd = 0xFF;
static uint32_t cdcLen = 0;
/* CDC interface class callbacks structure */
USBD_Class_cb_TypeDef USBD_CDC_cb =
{
usbd_cdc_Init,
usbd_cdc_DeInit,
usbd_cdc_Setup,
NULL, /* EP0_TxSent, */
usbd_cdc_EP0_RxReady,
usbd_cdc_DataIn,
usbd_cdc_DataOut,
usbd_cdc_SOF,
NULL,
NULL,
USBD_cdc_GetCfgDesc,
#ifdef USE_USB_OTG_HS
USBD_cdc_GetOtherCfgDesc, /* use same cobfig as per FS */
#endif /* USE_USB_OTG_HS */
};
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma data_alignment=4
#endif
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
/* USB CDC device Configuration Descriptor */
__ALIGN_BEGIN uint8_t usbd_cdc_CfgDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
{
/*Configuration Descriptor*/
0x09, /* bLength: Configuration Descriptor size */
USB_CONFIGURATION_DESCRIPTOR_TYPE, /* bDescriptorType: Configuration */
USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */
0x00,
0x02, /* bNumInterfaces: 2 interface */
0x01, /* bConfigurationValue: Configuration value */
0x00, /* iConfiguration: Index of string descriptor describing the configuration */
0xC0, /* bmAttributes: self powered */
0x32, /* MaxPower 0 mA */
/*---------------------------------------------------------------------------*/
/*Interface Descriptor */
0x09, /* bLength: Interface Descriptor size */
USB_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType: Interface */
/* Interface descriptor type */
0x00, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x01, /* bNumEndpoints: One endpoints used */
0x02, /* bInterfaceClass: Communication Interface Class */
0x02, /* bInterfaceSubClass: Abstract Control Model */
0x01, /* bInterfaceProtocol: Common AT commands */
0x00, /* iInterface: */
/*Header Functional Descriptor*/
0x05, /* bLength: Endpoint Descriptor size */
0x24, /* bDescriptorType: CS_INTERFACE */
0x00, /* bDescriptorSubtype: Header Func Desc */
0x10, /* bcdCDC: spec release number */
0x01,
/*Call Management Functional Descriptor*/
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x01, /* bDescriptorSubtype: Call Management Func Desc */
0x00, /* bmCapabilities: D0+D1 */
0x01, /* bDataInterface: 1 */
/*ACM Functional Descriptor*/
0x04, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x02, /* bDescriptorSubtype: Abstract Control Management desc */
0x02, /* bmCapabilities */
/*Union Functional Descriptor*/
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x06, /* bDescriptorSubtype: Union func desc */
0x00, /* bMasterInterface: Communication class interface */
0x01, /* bSlaveInterface0: Data Class Interface */
/*Endpoint 2 Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType: Endpoint */
CDC_CMD_EP, /* bEndpointAddress */
0x03, /* bmAttributes: Interrupt */
LOBYTE(CDC_CMD_PACKET_SZE), /* wMaxPacketSize: */
HIBYTE(CDC_CMD_PACKET_SZE),
#ifdef USE_USB_OTG_HS
0x10, /* bInterval: */
#else
0xFF, /* bInterval: */
#endif /* USE_USB_OTG_HS */
/*---------------------------------------------------------------------------*/
/*Data class interface descriptor*/
0x09, /* bLength: Endpoint Descriptor size */
USB_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType: */
0x01, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x02, /* bNumEndpoints: Two endpoints used */
0x0A, /* bInterfaceClass: CDC */
0x00, /* bInterfaceSubClass: */
0x00, /* bInterfaceProtocol: */
0x00, /* iInterface: */
/*Endpoint OUT Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType: Endpoint */
CDC_OUT_EP, /* bEndpointAddress */
0x02, /* bmAttributes: Bulk */
LOBYTE(CDC_DATA_MAX_PACKET_SIZE), /* wMaxPacketSize: */
HIBYTE(CDC_DATA_MAX_PACKET_SIZE),
0x00, /* bInterval: ignore for Bulk transfer */
/*Endpoint IN Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType: Endpoint */
CDC_IN_EP, /* bEndpointAddress */
0x02, /* bmAttributes: Bulk */
LOBYTE(CDC_DATA_MAX_PACKET_SIZE), /* wMaxPacketSize: */
HIBYTE(CDC_DATA_MAX_PACKET_SIZE),
0x00 /* bInterval: ignore for Bulk transfer */
} ;
#ifdef USE_USB_OTG_HS
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma data_alignment=4
#endif
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
__ALIGN_BEGIN uint8_t usbd_cdc_OtherCfgDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
{
0x09, /* bLength: Configuation Descriptor size */
USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION,
USB_CDC_CONFIG_DESC_SIZ,
0x00,
0x02, /* bNumInterfaces: 2 interfaces */
0x01, /* bConfigurationValue: */
0x04, /* iConfiguration: */
0xC0, /* bmAttributes: */
0x32, /* MaxPower 100 mA */
/*Interface Descriptor */
0x09, /* bLength: Interface Descriptor size */
USB_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType: Interface */
/* Interface descriptor type */
0x00, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x01, /* bNumEndpoints: One endpoints used */
0x02, /* bInterfaceClass: Communication Interface Class */
0x02, /* bInterfaceSubClass: Abstract Control Model */
0x01, /* bInterfaceProtocol: Common AT commands */
0x00, /* iInterface: */
/*Header Functional Descriptor*/
0x05, /* bLength: Endpoint Descriptor size */
0x24, /* bDescriptorType: CS_INTERFACE */
0x00, /* bDescriptorSubtype: Header Func Desc */
0x10, /* bcdCDC: spec release number */
0x01,
/*Call Management Functional Descriptor*/
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x01, /* bDescriptorSubtype: Call Management Func Desc */
0x00, /* bmCapabilities: D0+D1 */
0x01, /* bDataInterface: 1 */
/*ACM Functional Descriptor*/
0x04, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x02, /* bDescriptorSubtype: Abstract Control Management desc */
0x02, /* bmCapabilities */
/*Union Functional Descriptor*/
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x06, /* bDescriptorSubtype: Union func desc */
0x00, /* bMasterInterface: Communication class interface */
0x01, /* bSlaveInterface0: Data Class Interface */
/*Endpoint 2 Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType: Endpoint */
CDC_CMD_EP, /* bEndpointAddress */
0x03, /* bmAttributes: Interrupt */
LOBYTE(CDC_CMD_PACKET_SZE), /* wMaxPacketSize: */
HIBYTE(CDC_CMD_PACKET_SZE),
0xFF, /* bInterval: */
/*---------------------------------------------------------------------------*/
/*Data class interface descriptor*/
0x09, /* bLength: Endpoint Descriptor size */
USB_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType: */
0x01, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x02, /* bNumEndpoints: Two endpoints used */
0x0A, /* bInterfaceClass: CDC */
0x00, /* bInterfaceSubClass: */
0x00, /* bInterfaceProtocol: */
0x00, /* iInterface: */
/*Endpoint OUT Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType: Endpoint */
CDC_OUT_EP, /* bEndpointAddress */
0x02, /* bmAttributes: Bulk */
0x40, /* wMaxPacketSize: */
0x00,
0x00, /* bInterval: ignore for Bulk transfer */
/*Endpoint IN Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType: Endpoint */
CDC_IN_EP, /* bEndpointAddress */
0x02, /* bmAttributes: Bulk */
0x40, /* wMaxPacketSize: */
0x00,
0x00 /* bInterval */
};
#endif /* USE_USB_OTG_HS */
/**
* @}
*/
/** @defgroup usbd_cdc_Private_Functions
* @{
*/
/**
* @brief usbd_cdc_Init
* Initilaize the CDC interface
* @param pdev: device instance
* @param cfgidx: Configuration index
* @retval status
*/
static uint8_t usbd_cdc_Init (void *pdev,
uint8_t cfgidx)
{
uint8_t *pbuf;
/* Open EP IN */
DCD_EP_Open(pdev,
CDC_IN_EP,
CDC_DATA_IN_PACKET_SIZE,
USB_OTG_EP_BULK);
/* Open EP OUT */
DCD_EP_Open(pdev,
CDC_OUT_EP,
CDC_DATA_OUT_PACKET_SIZE,
USB_OTG_EP_BULK);
/* Open Command IN EP */
DCD_EP_Open(pdev,
CDC_CMD_EP,
CDC_CMD_PACKET_SZE,
USB_OTG_EP_INT);
pbuf = (uint8_t *)USBD_DeviceDesc;
pbuf[4] = DEVICE_CLASS_CDC;
pbuf[5] = DEVICE_SUBCLASS_CDC;
/* Initialize the Interface physical components */
APP_FOPS.pIf_Init();
/* Prepare Out endpoint to receive next packet */
DCD_EP_PrepareRx(pdev,
CDC_OUT_EP,
(uint8_t*)(USB_Rx_Buffer),
CDC_DATA_OUT_PACKET_SIZE);
return USBD_OK;
}
/**
* @brief usbd_cdc_Init
* DeInitialize the CDC layer
* @param pdev: device instance
* @param cfgidx: Configuration index
* @retval status
*/
static uint8_t usbd_cdc_DeInit (void *pdev,
uint8_t cfgidx)
{
/* Open EP IN */
DCD_EP_Close(pdev,
CDC_IN_EP);
/* Open EP OUT */
DCD_EP_Close(pdev,
CDC_OUT_EP);
/* Open Command IN EP */
DCD_EP_Close(pdev,
CDC_CMD_EP);
/* Restore default state of the Interface physical components */
APP_FOPS.pIf_DeInit();
return USBD_OK;
}
/**
* @brief usbd_cdc_Setup
* Handle the CDC specific requests
* @param pdev: instance
* @param req: usb requests
* @retval status
*/
static uint8_t usbd_cdc_Setup (void *pdev,
USB_SETUP_REQ *req)
{
uint16_t len=USB_CDC_DESC_SIZ;
uint8_t *pbuf=usbd_cdc_CfgDesc + 9;
switch (req->bmRequest & USB_REQ_TYPE_MASK)
{
/* CDC Class Requests -------------------------------*/
case USB_REQ_TYPE_CLASS :
/* Check if the request is a data setup packet */
if (req->wLength)
{
/* Check if the request is Device-to-Host */
if (req->bmRequest & 0x80)
{
/* Get the data to be sent to Host from interface layer */
APP_FOPS.pIf_Ctrl(req->bRequest, CmdBuff, req->wLength);
/* Send the data to the host */
USBD_CtlSendData (pdev,
CmdBuff,
req->wLength);
}
else /* Host-to-Device requeset */
{
/* Set the value of the current command to be processed */
cdcCmd = req->bRequest;
cdcLen = req->wLength;
/* Prepare the reception of the buffer over EP0
Next step: the received data will be managed in usbd_cdc_EP0_TxSent()
function. */
USBD_CtlPrepareRx (pdev,
CmdBuff,
req->wLength);
}
}
else /* No Data request */
{
/* Transfer the command to the interface layer */
APP_FOPS.pIf_Ctrl(req->bRequest, NULL, 0);
}
return USBD_OK;
default:
USBD_CtlError (pdev, req);
return USBD_FAIL;
/* Standard Requests -------------------------------*/
case USB_REQ_TYPE_STANDARD:
switch (req->bRequest)
{
case USB_REQ_GET_DESCRIPTOR:
if( (req->wValue >> 8) == CDC_DESCRIPTOR_TYPE)
{
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
pbuf = usbd_cdc_Desc;
#else
pbuf = usbd_cdc_CfgDesc + 9 + (9 * USBD_ITF_MAX_NUM);
#endif
len = MIN(USB_CDC_DESC_SIZ , req->wLength);
}
USBD_CtlSendData (pdev,
pbuf,
len);
break;
case USB_REQ_GET_INTERFACE :
USBD_CtlSendData (pdev,
(uint8_t *)&usbd_cdc_AltSet,
1);
break;
case USB_REQ_SET_INTERFACE :
if ((uint8_t)(req->wValue) < USBD_ITF_MAX_NUM)
{
usbd_cdc_AltSet = (uint8_t)(req->wValue);
}
else
{
/* Call the error management function (command will be nacked */
USBD_CtlError (pdev, req);
}
break;
}
}
return USBD_OK;
}
/**
* @brief usbd_cdc_EP0_RxReady
* Data received on control endpoint
* @param pdev: device device instance
* @retval status
*/
static uint8_t usbd_cdc_EP0_RxReady (void *pdev)
{
if (cdcCmd != NO_CMD)
{
/* Process the data */
APP_FOPS.pIf_Ctrl(cdcCmd, CmdBuff, cdcLen);
/* Reset the command variable to default value */
cdcCmd = NO_CMD;
}
return USBD_OK;
}
/**
* @brief usbd_audio_DataIn
* Data sent on non-control IN endpoint
* @param pdev: device instance
* @param epnum: endpoint number
* @retval status
*/
static uint8_t usbd_cdc_DataIn (void *pdev, uint8_t epnum)
{
uint16_t USB_Tx_ptr;
uint16_t USB_Tx_length;
if (USB_Tx_State == 1)
{
if (APP_Rx_length == 0)
{
USB_Tx_State = 0;
}
else
{
if (APP_Rx_length > CDC_DATA_IN_PACKET_SIZE){
USB_Tx_ptr = APP_Rx_ptr_out;
USB_Tx_length = CDC_DATA_IN_PACKET_SIZE;
APP_Rx_ptr_out += CDC_DATA_IN_PACKET_SIZE;
APP_Rx_length -= CDC_DATA_IN_PACKET_SIZE;
}
else
{
USB_Tx_ptr = APP_Rx_ptr_out;
USB_Tx_length = APP_Rx_length;
APP_Rx_ptr_out += APP_Rx_length;
APP_Rx_length = 0;
}
/* Prepare the available data buffer to be sent on IN endpoint */
DCD_EP_Tx (pdev,
CDC_IN_EP,
(uint8_t*)&APP_Rx_Buffer[USB_Tx_ptr],
USB_Tx_length);
}
}
return USBD_OK;
}
/**
* @brief usbd_cdc_DataOut
* Data received on non-control Out endpoint
* @param pdev: device instance
* @param epnum: endpoint number
* @retval status
*/
static uint8_t usbd_cdc_DataOut (void *pdev, uint8_t epnum)
{
uint16_t USB_Rx_Cnt;
/* Get the received data buffer and update the counter */
USB_Rx_Cnt = ((USB_OTG_CORE_HANDLE*)pdev)->dev.out_ep[epnum].xfer_count;
/* USB data will be immediately processed, this allow next USB traffic being
NAKed till the end of the application Xfer */
APP_FOPS.pIf_DataRx(USB_Rx_Buffer, USB_Rx_Cnt);
/* Prepare Out endpoint to receive next packet */
DCD_EP_PrepareRx(pdev,
CDC_OUT_EP,
(uint8_t*)(USB_Rx_Buffer),
CDC_DATA_OUT_PACKET_SIZE);
return USBD_OK;
}
/**
* @brief usbd_audio_SOF
* Start Of Frame event management
* @param pdev: instance
* @param epnum: endpoint number
* @retval status
*/
static uint8_t usbd_cdc_SOF (void *pdev)
{
static uint32_t FrameCount = 0;
if (FrameCount++ == CDC_IN_FRAME_INTERVAL)
{
/* Reset the frame counter */
FrameCount = 0;
/* Check the data to be sent through IN pipe */
Handle_USBAsynchXfer(pdev);
}
return USBD_OK;
}
/**
* @brief Handle_USBAsynchXfer
* Send data to USB
* @param pdev: instance
* @retval None
*/
static void Handle_USBAsynchXfer (void *pdev)
{
uint16_t USB_Tx_ptr;
uint16_t USB_Tx_length;
if(USB_Tx_State != 1)
{
if (APP_Rx_ptr_out == APP_RX_DATA_SIZE)
{
APP_Rx_ptr_out = 0;
}
if(APP_Rx_ptr_out == APP_Rx_ptr_in)
{
USB_Tx_State = 0;
return;
}
if(APP_Rx_ptr_out > APP_Rx_ptr_in) /* rollback */
{
APP_Rx_length = APP_RX_DATA_SIZE - APP_Rx_ptr_out;
}
else
{
APP_Rx_length = APP_Rx_ptr_in - APP_Rx_ptr_out;
}
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
APP_Rx_length &= ~0x03;
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
if (APP_Rx_length > CDC_DATA_IN_PACKET_SIZE)
{
USB_Tx_ptr = APP_Rx_ptr_out;
USB_Tx_length = CDC_DATA_IN_PACKET_SIZE;
APP_Rx_ptr_out += CDC_DATA_IN_PACKET_SIZE;
APP_Rx_length -= CDC_DATA_IN_PACKET_SIZE;
}
else
{
USB_Tx_ptr = APP_Rx_ptr_out;
USB_Tx_length = APP_Rx_length;
APP_Rx_ptr_out += APP_Rx_length;
APP_Rx_length = 0;
}
USB_Tx_State = 1;
DCD_EP_Tx (pdev,
CDC_IN_EP,
(uint8_t*)&APP_Rx_Buffer[USB_Tx_ptr],
USB_Tx_length);
}
}
/**
* @brief USBD_cdc_GetCfgDesc
* Return configuration descriptor
* @param speed : current device speed
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
static uint8_t *USBD_cdc_GetCfgDesc (uint8_t speed, uint16_t *length)
{
*length = sizeof (usbd_cdc_CfgDesc);
return usbd_cdc_CfgDesc;
}
/**
* @brief USBD_cdc_GetCfgDesc
* Return configuration descriptor
* @param speed : current device speed
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
#ifdef USE_USB_OTG_HS
static uint8_t *USBD_cdc_GetOtherCfgDesc (uint8_t speed, uint16_t *length)
{
*length = sizeof (usbd_cdc_OtherCfgDesc);
return usbd_cdc_OtherCfgDesc;
}
#endif
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

4
stm/lib/usbd_cdc_core.h
View File

@ -45,8 +45,8 @@
/** @defgroup usbd_cdc_Exported_Defines
* @{
*/
#define USB_CDC_CONFIG_DESC_SIZ (67)
#define USB_CDC_DESC_SIZ (67-9)
#define USB_CDC_CONFIG_DESC_SIZ (98)
#define USB_CDC_DESC_SIZ (98-9)
#define CDC_DESCRIPTOR_TYPE 0x21

2
stm/lib/usbd_cdc_vcp.c
View File

@ -30,8 +30,8 @@
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
/* Includes ------------------------------------------------------------------*/
#include "usbd_conf.h"
#include "usbd_cdc_vcp.h"
#include "usbd_cdc_conf.h"
#include "std.h"
/* Private typedef -----------------------------------------------------------*/

23
stm/lib/usbd_conf.h
View File

@ -1,7 +1,26 @@
#ifndef __USBD_CONF__H__
#define __USBD_CONF__H__
#define USBD_CFG_MAX_NUM 1 // TODO need more than 1?
#define USBD_ITF_MAX_NUM 1 // TODO need more than 1?
#define USBD_CFG_MAX_NUM 1
#define USBD_ITF_MAX_NUM 1 // TODO need more than 1?
// CDC Endpoints parameters
#define CDC_IN_EP 0x81 /* EP1 for data IN */
#define CDC_OUT_EP 0x01 /* EP1 for data OUT */
#define CDC_CMD_EP 0x82 /* EP2 for CDC commands */
#define CDC_DATA_MAX_PACKET_SIZE 64 /* Endpoint IN & OUT Packet size */
#define CDC_CMD_PACKET_SZE 8 /* Control Endpoint Packet size */
#define CDC_IN_FRAME_INTERVAL 5 /* Number of frames between IN transfers */
#define APP_RX_DATA_SIZE 2048 /* Total size of IN buffer:
APP_RX_DATA_SIZE*8/MAX_BAUDARATE*1000 should be > CDC_IN_FRAME_INTERVAL */
// MSC parameters
#define MSC_IN_EP 0x83
#define MSC_OUT_EP 0x03
#define MSC_MAX_PACKET 64
#define MSC_MEDIA_PACKET 4096
// for both?
#define APP_FOPS VCP_fops
#endif //__USBD_CONF__H__

30
stm/lib/usbd_desc.c
View File

@ -104,26 +104,26 @@ USBD_DEVICE USR_desc =
#endif
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
/* USB Standard Device Descriptor */
__ALIGN_BEGIN uint8_t USBD_DeviceDesc[USB_SIZ_DEVICE_DESC] __ALIGN_END =
{
0x12, /*bLength */
USB_DEVICE_DESCRIPTOR_TYPE, /*bDescriptorType*/
0x00, /*bcdUSB */
__ALIGN_BEGIN static uint8_t USBD_DeviceDesc[USB_SIZ_DEVICE_DESC] __ALIGN_END =
{
0x12, // bLength
USB_DEVICE_DESCRIPTOR_TYPE, // bDescriptorType
0x00, // bcdUSB: v2.0
0x02,
0x00, /*bDeviceClass*/
0x00, /*bDeviceSubClass*/
0x00, /*bDeviceProtocol*/
USB_OTG_MAX_EP0_SIZE, /*bMaxPacketSize*/
LOBYTE(USBD_VID), /*idVendor*/
HIBYTE(USBD_VID), /*idVendor*/
LOBYTE(USBD_PID), /*idVendor*/
HIBYTE(USBD_PID), /*idVendor*/
0x00, /*bcdDevice rel. 2.00*/
0xef, // bDeviceClass: Miscellaneous Device Class
0x02, // bDeviceSubClass: Common Class
0x01, // bDeviceProtocol: Interface Association Descriptor
USB_OTG_MAX_EP0_SIZE, // bMaxPacketSize
LOBYTE(USBD_VID), // idVendor
HIBYTE(USBD_VID), // idVendor
LOBYTE(USBD_PID), // idVendor
HIBYTE(USBD_PID), // idVendor
0x00, // bcdDevice: rel. 2.00
0x02,
USBD_IDX_MFC_STR, /*Index of manufacturer string*/
USBD_IDX_PRODUCT_STR, /*Index of product string*/
USBD_IDX_SERIAL_STR, /*Index of serial number string*/
USBD_CFG_MAX_NUM /*bNumConfigurations*/
USBD_CFG_MAX_NUM // bNumConfigurations: 1
} ; /* USB_DeviceDescriptor */
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED

3
stm/lib/usbd_desc.h
View File

@ -50,6 +50,7 @@
#define USB_STRING_DESCRIPTOR_TYPE 0x03
#define USB_INTERFACE_DESCRIPTOR_TYPE 0x04
#define USB_ENDPOINT_DESCRIPTOR_TYPE 0x05
#define USB_INTERFACE_ASSOCIATION_TYPE 0x0b
#define USB_SIZ_DEVICE_DESC 18
#define USB_SIZ_STRING_LANGID 4
@ -77,7 +78,7 @@
/** @defgroup USBD_DESC_Exported_Variables
* @{
*/
extern uint8_t USBD_DeviceDesc [USB_SIZ_DEVICE_DESC];
//extern uint8_t USBD_DeviceDesc [USB_SIZ_DEVICE_DESC];
extern uint8_t USBD_StrDesc[USB_MAX_STR_DESC_SIZ];
extern uint8_t USBD_OtherSpeedCfgDesc[USB_LEN_CFG_DESC];
extern uint8_t USBD_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC];

2
stm/lib/usbd_msc_bot.c
View File

@ -30,7 +30,7 @@
#include "usbd_msc_scsi.h"
#include "usbd_ioreq.h"
#include "usbd_msc_mem.h"
#include "usbd_msc_conf.h"
#include "usbd_conf.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{

99
stm/lib/usbd_msc_conf.h
View File

@ -1,99 +0,0 @@
/**
******************************************************************************
* @file usbd_conf.h
* @author MCD Application Team
* @version V1.1.0
* @date 19-March-2012
* @brief USB Device configuration file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_CONF__H__
#define __USBD_CONF__H__
/* Includes ------------------------------------------------------------------*/
#include "usb_conf.h"
/** @defgroup USB_CONF_Exported_Defines
* @{
*/
//#define USBD_CFG_MAX_NUM 1
//#define USBD_ITF_MAX_NUM 1
//#define USBD_SELF_POWERED
//#define USB_MAX_STR_DESC_SIZ 64
/* Class Layer Parameter */
#define MSC_IN_EP 0x81
#define MSC_OUT_EP 0x01
#ifdef USE_USB_OTG_HS
#ifdef USE_ULPI_PHY
#define MSC_MAX_PACKET 512
#else
#define MSC_MAX_PACKET 64
#endif
#else /*USE_USB_OTG_FS*/
#define MSC_MAX_PACKET 64
#endif
#define MSC_MEDIA_PACKET 4096
/**
* @}
*/
/** @defgroup USB_CONF_Exported_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USB_CONF_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USB_CONF_Exported_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USB_CONF_Exported_FunctionsPrototype
* @{
*/
/**
* @}
*/
#endif //__USBD_CONF__H__
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

497
stm/lib/usbd_msc_core.c
View File

@ -1,497 +0,0 @@
/**
******************************************************************************
* @file usbd_msc_core.c
* @author MCD Application Team
* @version V1.1.0
* @date 19-March-2012
* @brief This file provides all the MSC core functions.
*
* @verbatim
*
* ===================================================================
* MSC Class Description
* ===================================================================
* This module manages the MSC class V1.0 following the "Universal
* Serial Bus Mass Storage Class (MSC) Bulk-Only Transport (BOT) Version 1.0
* Sep. 31, 1999".
* This driver implements the following aspects of the specification:
* - Bulk-Only Transport protocol
* - Subclass : SCSI transparent command set (ref. SCSI Primary Commands - 3 (SPC-3))
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_msc_mem.h"
#include "usbd_msc_core.h"
#include "usbd_msc_bot.h"
#include "usbd_msc_conf.h"
#include "usbd_req.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup MSC_CORE
* @brief Mass storage core module
* @{
*/
/** @defgroup MSC_CORE_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup MSC_CORE_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup MSC_CORE_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup MSC_CORE_Private_FunctionPrototypes
* @{
*/
uint8_t USBD_MSC_Init (void *pdev,
uint8_t cfgidx);
uint8_t USBD_MSC_DeInit (void *pdev,
uint8_t cfgidx);
uint8_t USBD_MSC_Setup (void *pdev,
USB_SETUP_REQ *req);
uint8_t USBD_MSC_DataIn (void *pdev,
uint8_t epnum);
uint8_t USBD_MSC_DataOut (void *pdev,
uint8_t epnum);
uint8_t *USBD_MSC_GetCfgDesc (uint8_t speed,
uint16_t *length);
#ifdef USB_OTG_HS_CORE
uint8_t *USBD_MSC_GetOtherCfgDesc (uint8_t speed,
uint16_t *length);
#endif
uint8_t USBD_MSC_CfgDesc[USB_MSC_CONFIG_DESC_SIZ];
/**
* @}
*/
/** @defgroup MSC_CORE_Private_Variables
* @{
*/
USBD_Class_cb_TypeDef USBD_MSC_cb =
{
USBD_MSC_Init,
USBD_MSC_DeInit,
USBD_MSC_Setup,
NULL, /*EP0_TxSent*/
NULL, /*EP0_RxReady*/
USBD_MSC_DataIn,
USBD_MSC_DataOut,
NULL, /*SOF */
NULL,
NULL,
USBD_MSC_GetCfgDesc,
#ifdef USB_OTG_HS_CORE
USBD_MSC_GetOtherCfgDesc,
#endif
};
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma data_alignment=4
#endif
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
/* USB Mass storage device Configuration Descriptor */
/* All Descriptors (Configuration, Interface, Endpoint, Class, Vendor */
__ALIGN_BEGIN uint8_t USBD_MSC_CfgDesc[USB_MSC_CONFIG_DESC_SIZ] __ALIGN_END =
{
0x09, /* bLength: Configuation Descriptor size */
USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
USB_MSC_CONFIG_DESC_SIZ,
0x00,
0x01, /* bNumInterfaces: 1 interface */
0x01, /* bConfigurationValue: */
0x04, /* iConfiguration: */
0xC0, /* bmAttributes: */
0x32, /* MaxPower 100 mA */
/******************** Mass Storage interface ********************/
0x09, /* bLength: Interface Descriptor size */
0x04, /* bDescriptorType: */
0x00, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x02, /* bNumEndpoints*/
0x08, /* bInterfaceClass: MSC Class */
0x06, /* bInterfaceSubClass : SCSI transparent*/
0x50, /* nInterfaceProtocol */
0x05, /* iInterface: */
/******************** Mass Storage Endpoints ********************/
0x07, /*Endpoint descriptor length = 7*/
0x05, /*Endpoint descriptor type */
MSC_IN_EP, /*Endpoint address (IN, address 1) */
0x02, /*Bulk endpoint type */
LOBYTE(MSC_MAX_PACKET),
HIBYTE(MSC_MAX_PACKET),
0x00, /*Polling interval in milliseconds */
0x07, /*Endpoint descriptor length = 7 */
0x05, /*Endpoint descriptor type */
MSC_OUT_EP, /*Endpoint address (OUT, address 1) */
0x02, /*Bulk endpoint type */
LOBYTE(MSC_MAX_PACKET),
HIBYTE(MSC_MAX_PACKET),
0x00 /*Polling interval in milliseconds*/
};
#ifdef USB_OTG_HS_CORE
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma data_alignment=4
#endif
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
__ALIGN_BEGIN uint8_t USBD_MSC_OtherCfgDesc[USB_MSC_CONFIG_DESC_SIZ] __ALIGN_END =
{
0x09, /* bLength: Configuation Descriptor size */
USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION,
USB_MSC_CONFIG_DESC_SIZ,
0x00,
0x01, /* bNumInterfaces: 1 interface */
0x01, /* bConfigurationValue: */
0x04, /* iConfiguration: */
0xC0, /* bmAttributes: */
0x32, /* MaxPower 100 mA */
/******************** Mass Storage interface ********************/
0x09, /* bLength: Interface Descriptor size */
0x04, /* bDescriptorType: */
0x00, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x02, /* bNumEndpoints*/
0x08, /* bInterfaceClass: MSC Class */
0x06, /* bInterfaceSubClass : SCSI transparent command set*/
0x50, /* nInterfaceProtocol */
0x05, /* iInterface: */
/******************** Mass Storage Endpoints ********************/
0x07, /*Endpoint descriptor length = 7*/
0x05, /*Endpoint descriptor type */
MSC_IN_EP, /*Endpoint address (IN, address 1) */
0x02, /*Bulk endpoint type */
0x40,
0x00,
0x00, /*Polling interval in milliseconds */
0x07, /*Endpoint descriptor length = 7 */
0x05, /*Endpoint descriptor type */
MSC_OUT_EP, /*Endpoint address (OUT, address 1) */
0x02, /*Bulk endpoint type */
0x40,
0x00,
0x00 /*Polling interval in milliseconds*/
};
#endif
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma data_alignment=4
#endif
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
__ALIGN_BEGIN static uint8_t USBD_MSC_MaxLun __ALIGN_END = 0;
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma data_alignment=4
#endif
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
__ALIGN_BEGIN static uint8_t USBD_MSC_AltSet __ALIGN_END = 0;
/**
* @}
*/
/** @defgroup MSC_CORE_Private_Functions
* @{
*/
/**
* @brief USBD_MSC_Init
* Initialize the mass storage configuration
* @param pdev: device instance
* @param cfgidx: configuration index
* @retval status
*/
uint8_t USBD_MSC_Init (void *pdev,
uint8_t cfgidx)
{
USBD_MSC_DeInit(pdev , cfgidx );
/* Open EP IN */
DCD_EP_Open(pdev,
MSC_IN_EP,
MSC_EPIN_SIZE,
USB_OTG_EP_BULK);
/* Open EP OUT */
DCD_EP_Open(pdev,
MSC_OUT_EP,
MSC_EPOUT_SIZE,
USB_OTG_EP_BULK);
/* Init the BOT layer */
MSC_BOT_Init(pdev);
return USBD_OK;
}
/**
* @brief USBD_MSC_DeInit
* DeInitilaize the mass storage configuration
* @param pdev: device instance
* @param cfgidx: configuration index
* @retval status
*/
uint8_t USBD_MSC_DeInit (void *pdev,
uint8_t cfgidx)
{
/* Close MSC EPs */
DCD_EP_Close (pdev , MSC_IN_EP);
DCD_EP_Close (pdev , MSC_OUT_EP);
/* Un Init the BOT layer */
MSC_BOT_DeInit(pdev);
return USBD_OK;
}
/**
* @brief USBD_MSC_Setup
* Handle the MSC specific requests
* @param pdev: device instance
* @param req: USB request
* @retval status
*/
uint8_t USBD_MSC_Setup (void *pdev, USB_SETUP_REQ *req)
{
switch (req->bmRequest & USB_REQ_TYPE_MASK)
{
/* Class request */
case USB_REQ_TYPE_CLASS :
switch (req->bRequest)
{
case BOT_GET_MAX_LUN :
if((req->wValue == 0) &&
(req->wLength == 1) &&
((req->bmRequest & 0x80) == 0x80))
{
USBD_MSC_MaxLun = USBD_STORAGE_fops->GetMaxLun();
if(USBD_MSC_MaxLun > 0)
{
USBD_CtlSendData (pdev,
&USBD_MSC_MaxLun,
1);
}
else
{
USBD_CtlError(pdev , req);
return USBD_FAIL;
}
}
else
{
USBD_CtlError(pdev , req);
return USBD_FAIL;
}
break;
case BOT_RESET :
if((req->wValue == 0) &&
(req->wLength == 0) &&
((req->bmRequest & 0x80) != 0x80))
{
MSC_BOT_Reset(pdev);
}
else
{
USBD_CtlError(pdev , req);
return USBD_FAIL;
}
break;
default:
USBD_CtlError(pdev , req);
return USBD_FAIL;
}
break;
/* Interface & Endpoint request */
case USB_REQ_TYPE_STANDARD:
switch (req->bRequest)
{
case USB_REQ_GET_INTERFACE :
USBD_CtlSendData (pdev,
&USBD_MSC_AltSet,
1);
break;
case USB_REQ_SET_INTERFACE :
USBD_MSC_AltSet = (uint8_t)(req->wValue);
break;
case USB_REQ_CLEAR_FEATURE:
/* Flush the FIFO and Clear the stall status */
DCD_EP_Flush(pdev, (uint8_t)req->wIndex);
/* Re-activate the EP */
DCD_EP_Close (pdev , (uint8_t)req->wIndex);
if((((uint8_t)req->wIndex) & 0x80) == 0x80)
{
DCD_EP_Open(pdev,
((uint8_t)req->wIndex),
MSC_EPIN_SIZE,
USB_OTG_EP_BULK);
}
else
{
DCD_EP_Open(pdev,
((uint8_t)req->wIndex),
MSC_EPOUT_SIZE,
USB_OTG_EP_BULK);
}
/* Handle BOT error */
MSC_BOT_CplClrFeature(pdev, (uint8_t)req->wIndex);
break;
}
break;
default:
break;
}
return USBD_OK;
}
/**
* @brief USBD_MSC_DataIn
* handle data IN Stage
* @param pdev: device instance
* @param epnum: endpoint index
* @retval status
*/
uint8_t USBD_MSC_DataIn (void *pdev,
uint8_t epnum)
{
MSC_BOT_DataIn(pdev , epnum);
return USBD_OK;
}
/**
* @brief USBD_MSC_DataOut
* handle data OUT Stage
* @param pdev: device instance
* @param epnum: endpoint index
* @retval status
*/
uint8_t USBD_MSC_DataOut (void *pdev,
uint8_t epnum)
{
MSC_BOT_DataOut(pdev , epnum);
return USBD_OK;
}
/**
* @brief USBD_MSC_GetCfgDesc
* return configuration descriptor
* @param speed : current device speed
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
uint8_t *USBD_MSC_GetCfgDesc (uint8_t speed, uint16_t *length)
{
*length = sizeof (USBD_MSC_CfgDesc);
return USBD_MSC_CfgDesc;
}
/**
* @brief USBD_MSC_GetOtherCfgDesc
* return other speed configuration descriptor
* @param speed : current device speed
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
#ifdef USB_OTG_HS_CORE
uint8_t *USBD_MSC_GetOtherCfgDesc (uint8_t speed,
uint16_t *length)
{
*length = sizeof (USBD_MSC_OtherCfgDesc);
return USBD_MSC_OtherCfgDesc;
}
#endif
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

77
stm/lib/usbd_msc_core.h
View File

@ -1,77 +0,0 @@
/**
******************************************************************************
* @file usbd_msc_core.h
* @author MCD Application Team
* @version V1.1.0
* @date 19-March-2012
* @brief header for the usbd_msc_core.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef _USB_MSC_CORE_H_
#define _USB_MSC_CORE_H_
#include "usbd_ioreq.h"
/** @addtogroup USBD_MSC_BOT
* @{
*/
/** @defgroup USBD_MSC
* @brief This file is the Header file for USBD_msc.c
* @{
*/
/** @defgroup USBD_BOT_Exported_Defines
* @{
*/
#define BOT_GET_MAX_LUN 0xFE
#define BOT_RESET 0xFF
#define USB_MSC_CONFIG_DESC_SIZ 32
#define MSC_EPIN_SIZE MSC_MAX_PACKET
#define MSC_EPOUT_SIZE MSC_MAX_PACKET
/**
* @}
*/
/** @defgroup USB_CORE_Exported_Types
* @{
*/
extern USBD_Class_cb_TypeDef USBD_MSC_cb;
/**
* @}
*/
/**
* @}
*/
#endif // _USB_MSC_CORE_H_
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

2
stm/lib/usbd_msc_scsi.c
View File

@ -30,7 +30,7 @@
#include "usbd_msc_scsi.h"
#include "usbd_msc_mem.h"
#include "usbd_msc_data.h"
#include "usbd_msc_conf.h"
#include "usbd_conf.h"

726
stm/lib/usbd_pyb_core.c 100644
View File

@ -0,0 +1,726 @@
/**
******************************************************************************
* @file usbd_cdc_core.c
* @author MCD Application Team
* @version V1.1.0
* @date 19-March-2012
* @brief This file provides the high layer firmware functions to manage the
* following functionalities of the USB CDC Class:
* - Initialization and Configuration of high and low layer
* - Enumeration as CDC Device (and enumeration for each implemented memory interface)
* - OUT/IN data transfer
* - Command IN transfer (class requests management)
* - Error management
*
* @verbatim
*
* ===================================================================
* CDC Class Driver Description
* ===================================================================
* This driver manages the "Universal Serial Bus Class Definitions for Communications Devices
* Revision 1.2 November 16, 2007" and the sub-protocol specification of "Universal Serial Bus
* Communications Class Subclass Specification for PSTN Devices Revision 1.2 February 9, 2007"
* This driver implements the following aspects of the specification:
* - Device descriptor management
* - Configuration descriptor management
* - Enumeration as CDC device with 2 data endpoints (IN and OUT) and 1 command endpoint (IN)
* - Requests management (as described in section 6.2 in specification)
* - Abstract Control Model compliant
* - Union Functional collection (using 1 IN endpoint for control)
* - Data interface class
* @note
* For the Abstract Control Model, this core allows only transmitting the requests to
* lower layer dispatcher (ie. usbd_cdc_vcp.c/.h) which should manage each request and
* perform relative actions.
*
* These aspects may be enriched or modified for a specific user application.
*
* This driver doesn't implement the following aspects of the specification
* (but it is possible to manage these features with some modifications on this driver):
* - Any class-specific aspect relative to communication classes should be managed by user application.
* - All communication classes other than PSTN are not managed
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_cdc_core.h"
#include "usbd_desc.h"
#include "usbd_req.h"
#include "usbd_conf.h"
#include "usbd_msc_bot.h"
#include "usbd_msc_mem.h"
#define USB_PYB_CONFIG_DESC_SIZ 98
#define MSC_EPIN_SIZE MSC_MAX_PACKET
#define MSC_EPOUT_SIZE MSC_MAX_PACKET
/*********************************************
PYB Device library callbacks
*********************************************/
static uint8_t usbd_pyb_Init (void *pdev, uint8_t cfgidx);
static uint8_t usbd_pyb_DeInit (void *pdev, uint8_t cfgidx);
static uint8_t usbd_pyb_Setup (void *pdev, USB_SETUP_REQ *req);
static uint8_t usbd_pyb_EP0_RxReady (void *pdev);
static uint8_t usbd_pyb_DataIn (void *pdev, uint8_t epnum);
static uint8_t usbd_pyb_DataOut (void *pdev, uint8_t epnum);
static uint8_t usbd_pyb_SOF (void *pdev);
/*********************************************
PYB specific management functions
*********************************************/
static void Handle_USBAsynchXfer (void *pdev);
static uint8_t *usbd_pyb_GetCfgDesc (uint8_t speed, uint16_t *length);
/** @defgroup usbd_cdc_Private_Variables
* @{
*/
extern CDC_IF_Prop_TypeDef APP_FOPS;
extern uint8_t USBD_DeviceDesc [USB_SIZ_DEVICE_DESC];
__ALIGN_BEGIN static uint8_t usbd_cdc_AltSet __ALIGN_END = 0;
__ALIGN_BEGIN static uint8_t USB_Rx_Buffer[CDC_DATA_MAX_PACKET_SIZE] __ALIGN_END;
__ALIGN_BEGIN uint8_t APP_Rx_Buffer[APP_RX_DATA_SIZE] __ALIGN_END;
__ALIGN_BEGIN static uint8_t CmdBuff[CDC_CMD_PACKET_SZE] __ALIGN_END;
__ALIGN_BEGIN static uint8_t USBD_MSC_MaxLun __ALIGN_END = 0;
__ALIGN_BEGIN static uint8_t USBD_MSC_AltSet __ALIGN_END = 0;
uint32_t APP_Rx_ptr_in = 0;
uint32_t APP_Rx_ptr_out = 0;
uint32_t APP_Rx_length = 0;
uint8_t USB_Tx_State = 0;
static uint32_t cdcCmd = 0xFF;
static uint32_t cdcLen = 0;
/* PYB interface class callbacks structure */
USBD_Class_cb_TypeDef USBD_PYB_cb =
{
usbd_pyb_Init,
usbd_pyb_DeInit,
usbd_pyb_Setup,
NULL, // EP0_TxSent
usbd_pyb_EP0_RxReady,
usbd_pyb_DataIn,
usbd_pyb_DataOut,
usbd_pyb_SOF,
NULL, // IsoINIncomplete
NULL, // IsoOUTIncomplete
usbd_pyb_GetCfgDesc,
// for OTG_HS support need to add other cfg desc here
};
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma data_alignment=4
#endif
#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
/* USB PYB device Configuration Descriptor */
__ALIGN_BEGIN static uint8_t usbd_pyb_CfgDesc[USB_PYB_CONFIG_DESC_SIZ] __ALIGN_END =
{
//--------------------------------------------------------------------------
// Configuration Descriptor
0x09, // bLength: Configuration Descriptor size
USB_CONFIGURATION_DESCRIPTOR_TYPE, // bDescriptorType: Configuration
LOBYTE(USB_PYB_CONFIG_DESC_SIZ), // wTotalLength: no of returned bytes
HIBYTE(USB_PYB_CONFIG_DESC_SIZ),
0x03, // bNumInterfaces: 3 interfaces
0x01, // bConfigurationValue: Configuration value
0x00, // iConfiguration: Index of string descriptor describing the configuration
0x80, // bmAttributes: bus powered; 0xc0 for self powered
0xfa, // bMaxPower: in units of 2mA
//==========================================================================
// Interface Association for CDC VCP
0x08, // bLength: 8 bytes
USB_INTERFACE_ASSOCIATION_TYPE, // bDescriptorType: IAD
0x00, // bFirstInterface: first interface for this association
0x02, // bInterfaceCount: nummber of interfaces for this association
0x00, // bFunctionClass: ?
0x00, // bFunctionSubClass: ?
0x00, // bFunctionProtocol: ?
0x00, // iFunction: index of string for this function
//--------------------------------------------------------------------------
// Interface Descriptor
0x09, // bLength: Interface Descriptor size
USB_INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType: Interface
0x00, // bInterfaceNumber: Number of Interface
0x00, // bAlternateSetting: Alternate setting
0x01, // bNumEndpoints: One endpoints used
0x02, // bInterfaceClass: Communication Interface Class
0x02, // bInterfaceSubClass: Abstract Control Model
0x01, // bInterfaceProtocol: Common AT commands
0x00, // iInterface:
// Header Functional Descriptor
0x05, // bLength: Endpoint Descriptor size
0x24, // bDescriptorType: CS_INTERFACE
0x00, // bDescriptorSubtype: Header Func Desc
0x10, // bcdCDC: spec release number
0x01, // ?
// Call Management Functional Descriptor
0x05, // bFunctionLength
0x24, // bDescriptorType: CS_INTERFACE
0x01, // bDescriptorSubtype: Call Management Func Desc
0x00, // bmCapabilities: D0+D1
0x01, // bDataInterface: 1
// ACM Functional Descriptor
0x04, // bFunctionLength
0x24, // bDescriptorType: CS_INTERFACE
0x02, // bDescriptorSubtype: Abstract Control Management desc
0x02, // bmCapabilities
// Union Functional Descriptor
0x05, // bFunctionLength
0x24, // bDescriptorType: CS_INTERFACE
0x06, // bDescriptorSubtype: Union func desc
0x00, // bMasterInterface: Communication class interface
0x01, // bSlaveInterface0: Data Class Interface
// Endpoint 2 Descriptor
0x07, // bLength: Endpoint Descriptor size
USB_ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType: Endpoint
CDC_CMD_EP, // bEndpointAddress
0x03, // bmAttributes: Interrupt
LOBYTE(CDC_CMD_PACKET_SZE), // wMaxPacketSize:
HIBYTE(CDC_CMD_PACKET_SZE),
0x80, // bInterval: polling interval in frames of 1ms
//--------------------------------------------------------------------------
// Data class interface descriptor
0x09, // bLength: Endpoint Descriptor size
USB_INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType: interface
0x01, // bInterfaceNumber: Number of Interface
0x00, // bAlternateSetting: Alternate setting
0x02, // bNumEndpoints: Two endpoints used
0x0A, // bInterfaceClass: CDC
0x00, // bInterfaceSubClass: ?
0x00, // bInterfaceProtocol: ?
0x00, // iInterface:
// Endpoint OUT Descriptor
0x07, // bLength: Endpoint Descriptor size
USB_ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType: Endpoint
CDC_OUT_EP, // bEndpointAddress
0x02, // bmAttributes: Bulk
LOBYTE(CDC_DATA_MAX_PACKET_SIZE), // wMaxPacketSize:
HIBYTE(CDC_DATA_MAX_PACKET_SIZE),
0x00, // bInterval: ignore for Bulk transfer
// Endpoint IN Descriptor
0x07, // bLength: Endpoint Descriptor size
USB_ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType: Endpoint
CDC_IN_EP, // bEndpointAddress
0x02, // bmAttributes: Bulk
LOBYTE(CDC_DATA_MAX_PACKET_SIZE), // wMaxPacketSize:
HIBYTE(CDC_DATA_MAX_PACKET_SIZE),
0x00, // bInterval: ignore for Bulk transfer
//==========================================================================
// MSC only has 1 interface so doesn't need an IAD
//--------------------------------------------------------------------------
// Interface Descriptor
0x09, // bLength: Interface Descriptor size
USB_INTERFACE_DESCRIPTOR_TYPE, // bDescriptorType: interface descriptor
0x02, // bInterfaceNumber: Number of Interface
0x00, // bAlternateSetting: Alternate setting
0x02, // bNumEndpoints*/
0x08, // bInterfaceClass: MSC Class
0x06, // bInterfaceSubClass : SCSI transparent*/
0x50, // nInterfaceProtocol
0x00, // iInterface:
// Endpoint IN descriptor
0x07, // bLength: Endpoint descriptor length
USB_ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType: Endpoint descriptor type
MSC_IN_EP, // bEndpointAddress: IN, address 3
0x02, // bmAttributes: Bulk endpoint type
LOBYTE(MSC_MAX_PACKET), // wMaxPacketSize
HIBYTE(MSC_MAX_PACKET),
0x00, // bInterval: ignore for Bulk transfer
// Endpoint OUT descriptor
0x07, // bLength: Endpoint descriptor length
USB_ENDPOINT_DESCRIPTOR_TYPE, // bDescriptorType: Endpoint descriptor type
MSC_OUT_EP, // bEndpointAddress: OUT, address 3
0x02, // bmAttributes: Bulk endpoint type
LOBYTE(MSC_MAX_PACKET), // wMaxPacketSize
HIBYTE(MSC_MAX_PACKET),
0x00, // bInterval: ignore for Bulk transfer
};
/** @defgroup usbd_pyb_Private_Functions
* @{
*/
/**
* @brief usbd_pyb_Init
* Initilaize the PYB interface
* @param pdev: device instance
* @param cfgidx: Configuration index
* @retval status
*/
static uint8_t usbd_pyb_Init(void *pdev, uint8_t cfgidx) {
// deinit first to reset
usbd_pyb_DeInit(pdev, cfgidx);
//----------------------------------
// CDC VCP component
// Open EP IN
DCD_EP_Open(pdev,
CDC_IN_EP,
CDC_DATA_IN_PACKET_SIZE,
USB_OTG_EP_BULK);
// Open EP OUT
DCD_EP_Open(pdev,
CDC_OUT_EP,
CDC_DATA_OUT_PACKET_SIZE,
USB_OTG_EP_BULK);
// Open Command IN EP
DCD_EP_Open(pdev,
CDC_CMD_EP,
CDC_CMD_PACKET_SZE,
USB_OTG_EP_INT);
/*
// can use this to dynamically set the device class
uint8_t *pbuf = USBD_DeviceDesc;
pbuf[4] = DEVICE_CLASS_CDC;
pbuf[5] = DEVICE_SUBCLASS_CDC;
*/
// Initialize the Interface physical components
APP_FOPS.pIf_Init();
// Prepare Out endpoint to receive next packet */
DCD_EP_PrepareRx(pdev,
CDC_OUT_EP,
(uint8_t*)(USB_Rx_Buffer),
CDC_DATA_OUT_PACKET_SIZE);
//----------------------------------
// MSC component
// Open EP IN
DCD_EP_Open(pdev,
MSC_IN_EP,
MSC_EPIN_SIZE,
USB_OTG_EP_BULK);
// Open EP OUT
DCD_EP_Open(pdev,
MSC_OUT_EP,
MSC_EPOUT_SIZE,
USB_OTG_EP_BULK);
// Init the BOT layer
MSC_BOT_Init(pdev);
return USBD_OK;
}
/**
* @brief usbd_pyb_Init
* DeInitialize the CDC layer
* @param pdev: device instance
* @param cfgidx: Configuration index
* @retval status
*/
static uint8_t usbd_pyb_DeInit(void *pdev, uint8_t cfgidx) {
//----------------------------------
// CDC VCP component
// close CDC EPs
DCD_EP_Close(pdev, CDC_IN_EP);
DCD_EP_Close(pdev, CDC_OUT_EP);
DCD_EP_Close(pdev, CDC_CMD_EP);
// Restore default state of the Interface physical components
APP_FOPS.pIf_DeInit();
//----------------------------------
// MSC component
// Close MSC EPs
DCD_EP_Close(pdev, MSC_IN_EP);
DCD_EP_Close(pdev, MSC_OUT_EP);
// Un Init the BOT layer
MSC_BOT_DeInit(pdev);
return USBD_OK;
}
#define BOT_GET_MAX_LUN 0xFE
#define BOT_RESET 0xFF
/**
* @brief usbd_pyb_Setup
* Handle the CDC specific requests
* @param pdev: instance
* @param req: usb requests
* @retval status
*/
static uint8_t usbd_pyb_Setup(void *pdev, USB_SETUP_REQ *req) {
switch (req->bmRequest & (USB_REQ_TYPE_MASK | USB_REQ_RECIPIENT_MASK)) {
// Standard Device Request ---------------------------------------------
case (USB_REQ_TYPE_STANDARD | USB_REQ_RECIPIENT_DEVICE):
switch (req->bRequest) {
case USB_REQ_GET_DESCRIPTOR:
{
uint16_t len = USB_CDC_DESC_SIZ; // XXX WRONG!
uint8_t *pbuf = usbd_pyb_CfgDesc + 9;
if ((req->wValue >> 8) == CDC_DESCRIPTOR_TYPE) {
pbuf = usbd_pyb_CfgDesc + 9 + (9 * USBD_ITF_MAX_NUM); // TODO
len = MIN(USB_CDC_DESC_SIZ, req->wLength); // TODO
}
return USBD_CtlSendData(pdev, pbuf, len);
}
}
break;
// Standard Interface Request ------------------------------------------
case (USB_REQ_TYPE_STANDARD | USB_REQ_RECIPIENT_INTERFACE):
switch (req->bRequest) {
case USB_REQ_GET_INTERFACE:
// wIndex & 0xff is the interface
if ((req->wIndex & 0xff) <= 1) {
return USBD_CtlSendData(pdev, &usbd_cdc_AltSet, 1);
} else {
return USBD_CtlSendData(pdev, &USBD_MSC_AltSet, 1);
}
case USB_REQ_SET_INTERFACE:
if ((uint8_t)(req->wValue) < USBD_ITF_MAX_NUM) { // TODO
if ((req->wIndex & 0xff) <= 1) {
usbd_cdc_AltSet = req->wValue;
} else {
USBD_MSC_AltSet = req->wValue;
}
return USBD_OK;
}
}
break;
// Standard Endpoint Request -------------------------------------------
case (USB_REQ_TYPE_STANDARD | USB_REQ_RECIPIENT_ENDPOINT):
// req->wIndex is the endpoint number, including direction
if (req->wIndex == MSC_IN_EP || req->wIndex == MSC_OUT_EP) {
// MSC component
switch (req->bRequest) {
case USB_REQ_CLEAR_FEATURE:
// Flush the FIFO and Clear the stall status
DCD_EP_Flush(pdev, (uint8_t)req->wIndex);
// Re-activate the EP
DCD_EP_Close(pdev, (uint8_t)req->wIndex);
if ((((uint8_t)req->wIndex) & 0x80) == 0x80) {
DCD_EP_Open(pdev, ((uint8_t)req->wIndex), MSC_EPIN_SIZE, USB_OTG_EP_BULK);
} else {
DCD_EP_Open(pdev, ((uint8_t)req->wIndex), MSC_EPOUT_SIZE, USB_OTG_EP_BULK);
}
// Handle BOT error
MSC_BOT_CplClrFeature(pdev, (uint8_t)req->wIndex);
return USBD_OK;
}
}
break;
// CDC Class Requests ------------------------------
case (USB_REQ_TYPE_CLASS | USB_REQ_RECIPIENT_INTERFACE):
// req->wIndex is the recipient interface number
if (req->wIndex == 0) {
// CDC component, communications interface (TODO do we need to handle if#1?)
// Check if the request is a data setup packet
if (req->wLength) {
if (req->bmRequest & 0x80) {
// Device-to-Host request
// Get the data to be sent to Host from interface layer
APP_FOPS.pIf_Ctrl(req->bRequest, CmdBuff, req->wLength);
// Send the data to the host
return USBD_CtlSendData(pdev, CmdBuff, req->wLength);
} else {
// Host-to-Device requeset
// Set the value of the current command to be processed */
cdcCmd = req->bRequest;
cdcLen = req->wLength;
// Prepare the reception of the buffer over EP0
// Next step: the received data will be managed in usbd_cdc_EP0_TxSent() function.
return USBD_CtlPrepareRx(pdev, CmdBuff, req->wLength);
}
} else {
// Not a Data request
// Transfer the command to the interface layer */
return APP_FOPS.pIf_Ctrl(req->bRequest, NULL, 0);
}
} else if (req->wIndex == 2) {
// MSC component
switch (req->bRequest) {
case BOT_GET_MAX_LUN:
if ((req->wValue == 0) && (req->wLength == 1) && ((req->bmRequest & 0x80) == 0x80)) {
USBD_MSC_MaxLun = USBD_STORAGE_fops->GetMaxLun();
if (USBD_MSC_MaxLun > 0) {
return USBD_CtlSendData(pdev, &USBD_MSC_MaxLun, 1);
}
}
break;
case BOT_RESET:
if ((req->wValue == 0) && (req->wLength == 0) && ((req->bmRequest & 0x80) != 0x80)) {
MSC_BOT_Reset(pdev);
return USBD_OK;
}
break;
}
}
break;
}
printf("SU %x %x %x %x\n", req->bmRequest, req->bRequest, req->wValue, req->wIndex);
// invalid command
USBD_CtlError(pdev, req);
return USBD_FAIL;
}
/**
* @brief usbd_pyb_EP0_RxReady
* Data received on control endpoint
* @param pdev: device device instance
* @retval status
*/
static uint8_t usbd_pyb_EP0_RxReady(void *pdev) {
if (cdcCmd != NO_CMD) {
// Process the data
APP_FOPS.pIf_Ctrl(cdcCmd, CmdBuff, cdcLen);
// Reset the command variable to default value
cdcCmd = NO_CMD;
}
return USBD_OK;
}
/**
* @brief usbd_pyb_DataIn
* Data sent on non-control IN endpoint
* @param pdev: device instance
* @param epnum: endpoint number
* @retval status
*/
static uint8_t usbd_pyb_DataIn(void *pdev, uint8_t epnum) {
uint16_t USB_Tx_ptr;
uint16_t USB_Tx_length;
switch (epnum) {
case (CDC_IN_EP & 0x7f): // TODO is this correct?
case (CDC_CMD_EP & 0x7f): // TODO is this correct?
if (USB_Tx_State == 1) {
if (APP_Rx_length == 0) {
USB_Tx_State = 0;
} else {
if (APP_Rx_length > CDC_DATA_IN_PACKET_SIZE) {
USB_Tx_ptr = APP_Rx_ptr_out;
USB_Tx_length = CDC_DATA_IN_PACKET_SIZE;
APP_Rx_ptr_out += CDC_DATA_IN_PACKET_SIZE;
APP_Rx_length -= CDC_DATA_IN_PACKET_SIZE;
} else {
USB_Tx_ptr = APP_Rx_ptr_out;
USB_Tx_length = APP_Rx_length;
APP_Rx_ptr_out += APP_Rx_length;
APP_Rx_length = 0;
}
// Prepare the available data buffer to be sent on IN endpoint
DCD_EP_Tx(pdev,
CDC_IN_EP,
(uint8_t*)&APP_Rx_Buffer[USB_Tx_ptr],
USB_Tx_length);
}
}
break;
case (MSC_IN_EP & 0x7f): // TODO?
MSC_BOT_DataIn(pdev, epnum);
break;
}
return USBD_OK;
}
/**
* @brief usbd_pyb_DataOut
* Data received on non-control Out endpoint
* @param pdev: device instance
* @param epnum: endpoint number
* @retval status
*/
static uint8_t usbd_pyb_DataOut(void *pdev, uint8_t epnum) {
uint16_t USB_Rx_Cnt;
switch (epnum) {
case (CDC_OUT_EP & 0x7f): // TODO is this correct?
// Get the received data buffer and update the counter */
USB_Rx_Cnt = ((USB_OTG_CORE_HANDLE*)pdev)->dev.out_ep[epnum].xfer_count;
/* USB data will be immediately processed, this allow next USB traffic being
NAKed till the end of the application Xfer */
APP_FOPS.pIf_DataRx(USB_Rx_Buffer, USB_Rx_Cnt);
// Prepare Out endpoint to receive next packet */
DCD_EP_PrepareRx(pdev,
CDC_OUT_EP,
(uint8_t*)(USB_Rx_Buffer),
CDC_DATA_OUT_PACKET_SIZE);
break;
case (MSC_OUT_EP & 0x7f): // TODO is this correct?
MSC_BOT_DataOut(pdev, epnum);
break;
}
return USBD_OK;
}
/**
* @brief usbd_pyb_SOF
* Start Of Frame event management
* @param pdev: instance
* @retval status
*/
static uint8_t usbd_pyb_SOF(void *pdev) {
static uint32_t FrameCount = 0;
// TODO do we need to check that this is for CDC/VCP? can we even do that?
if (FrameCount++ == CDC_IN_FRAME_INTERVAL) {
// Reset the frame counter */
FrameCount = 0;
// Check the data to be sent through IN pipe */
Handle_USBAsynchXfer(pdev);
}
return USBD_OK;
}
/**
* @brief Handle_USBAsynchXfer
* Send data to USB
* @param pdev: instance
* @retval None
*/
static void Handle_USBAsynchXfer (void *pdev)
{
uint16_t USB_Tx_ptr;
uint16_t USB_Tx_length;
if(USB_Tx_State != 1)
{
if (APP_Rx_ptr_out == APP_RX_DATA_SIZE)
{
APP_Rx_ptr_out = 0;
}
if(APP_Rx_ptr_out == APP_Rx_ptr_in)
{
USB_Tx_State = 0;
return;
}
if(APP_Rx_ptr_out > APP_Rx_ptr_in) // rollback */
{
APP_Rx_length = APP_RX_DATA_SIZE - APP_Rx_ptr_out;
}
else
{
APP_Rx_length = APP_Rx_ptr_in - APP_Rx_ptr_out;
}
#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
APP_Rx_length &= ~0x03;
#endif // USB_OTG_HS_INTERNAL_DMA_ENABLED */
if (APP_Rx_length > CDC_DATA_IN_PACKET_SIZE)
{
USB_Tx_ptr = APP_Rx_ptr_out;
USB_Tx_length = CDC_DATA_IN_PACKET_SIZE;
APP_Rx_ptr_out += CDC_DATA_IN_PACKET_SIZE;
APP_Rx_length -= CDC_DATA_IN_PACKET_SIZE;
}
else
{
USB_Tx_ptr = APP_Rx_ptr_out;
USB_Tx_length = APP_Rx_length;
APP_Rx_ptr_out += APP_Rx_length;
APP_Rx_length = 0;
}
USB_Tx_State = 1;
DCD_EP_Tx (pdev,
CDC_IN_EP,
(uint8_t*)&APP_Rx_Buffer[USB_Tx_ptr],
USB_Tx_length);
}
}
/**
* @brief usbd_pyb_GetCfgDesc
* Return configuration descriptor
* @param speed : current device speed
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
static uint8_t *usbd_pyb_GetCfgDesc(uint8_t speed, uint16_t *length) {
*length = sizeof(usbd_pyb_CfgDesc);
return usbd_pyb_CfgDesc;
}

1
stm/lib/usbd_pyb_core.h 100644
View File

@ -0,0 +1 @@
extern USBD_Class_cb_TypeDef USBD_PYB_cb;

6
stm/lib/usbd_req.c
View File

@ -127,7 +127,7 @@ static void USBD_SetFeature(USB_OTG_CORE_HANDLE *pdev,
static void USBD_ClrFeature(USB_OTG_CORE_HANDLE *pdev,
USB_SETUP_REQ *req);
static uint8_t USBD_GetLen(uint8_t *buf);
static uint8_t USBD_GetLen(const char *buf);
/**
* @}
*/
@ -815,7 +815,7 @@ void USBD_CtlError( USB_OTG_CORE_HANDLE *pdev,
* @param len : descriptor length
* @retval None
*/
void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len)
void USBD_GetString(const char *desc, uint8_t *unicode, uint16_t *len)
{
uint8_t idx = 0;
@ -839,7 +839,7 @@ void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len)
* @param buf : pointer to the ascii string buffer
* @retval string length
*/
static uint8_t USBD_GetLen(uint8_t *buf)
static uint8_t USBD_GetLen(const char *buf)
{
uint8_t len = 0;

2
stm/lib/usbd_req.h
View File

@ -89,7 +89,7 @@ void USBD_ParseSetupRequest( USB_OTG_CORE_HANDLE *pdev,
void USBD_CtlError( USB_OTG_CORE_HANDLE *pdev,
USB_SETUP_REQ *req);
void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len);
void USBD_GetString(const char *desc, uint8_t *unicode, uint16_t *len);
/**
* @}
*/

2
stm/lib/usbd_storage_msd.c
View File

@ -212,7 +212,6 @@ int8_t STORAGE_GetCapacity (uint8_t lun, uint32_t *block_num, uint32_t *block_si
*/
int8_t STORAGE_IsReady (uint8_t lun)
{
/*
#ifndef USE_STM3210C_EVAL
@ -268,7 +267,6 @@ int8_t STORAGE_Read (uint8_t lun,
uint32_t blk_addr,
uint16_t blk_len)
{
/*
if( SD_ReadMultiBlocks (buf,
blk_addr * 512,

8
stm/main.c
View File

@ -716,7 +716,7 @@ int main() {
}
// read a file
if (1) {
if (0) {
FIL fp;
f_open(&fp, "0:/boot.py", FA_READ);
UINT n;
@ -744,10 +744,10 @@ int main() {
//usb_vcp_init();
}
// USB MSC testing
// USB testing
if (1) {
void usb_msc_init();
usb_msc_init();
void usb_init();
usb_init();
}
int i = 0;

9
stm/usb.c
View File

@ -1,5 +1,6 @@
#include "usbd_cdc_core.h"
#include "usbd_msc_core.h"
#include "usb_core.h"
#include "usbd_core.h"
#include "usbd_pyb_core.h"
#include "usbd_usr.h"
#include "usbd_desc.h"
@ -15,6 +16,6 @@ void usb_vcp_send(const char* str, int len) {
//APP_FOPS.pIf_DataTx(str, len);
}
void usb_msc_init() {
USBD_Init(&USB_OTG_dev, USB_OTG_FS_CORE_ID, &USR_desc, &USBD_MSC_cb, &USR_cb);
void usb_init() {
USBD_Init(&USB_OTG_dev, USB_OTG_FS_CORE_ID, &USR_desc, &USBD_PYB_cb, &USR_cb);
}