75de07a86b
extmod/moduheapq: Adhoc changes to support ordering by utime.ticks_ms().
...
As required for uasyncio.
2016-07-04 01:02:25 +03:00
d83177b248
unix/mpconfigport_minimal.h: Allow to print a string within 1KB of heap.
...
By adjusting parser allocation policy.
2016-07-03 00:12:46 +03:00
e965d2b82a
unix/Makefile: Make "minimal" build be minimal again.
2016-07-03 00:10:58 +03:00
4cfe3e84b0
esp8266/README: Promote from "highly experimental" to "experimental".
2016-07-02 23:14:22 +03:00
b8f45166c6
esp8266: Switch webrepl to use frozen bytecode.
2016-07-02 22:45:31 +03:00
dec51e3519
esp8266: Switch webrepl_setup to use frozen bytecode.
2016-07-02 22:40:16 +03:00
686367dcfc
esp8266: Explicitly collect garbage in bootstrap scripts.
...
Leads to less fragmentation at teh time user code starts.
2016-07-02 19:22:55 +03:00
417dc0c05d
extmod/modbtree: Fixes for nanbox build.
2016-07-02 15:58:13 +03:00
43241ceaac
unix: Enable btree module.
...
But disable it for coverage build, as its extra warninsg aren't compatible
with K&R C BerkeleyDB uses.
2016-07-02 15:26:07 +03:00
b09cd0e1ec
extmod/modbtree: Fix unused argument warning.
2016-07-02 15:21:54 +03:00
737bd9c314
py/mpconfig.h: Mention MICROPY_PY_BTREE config option.
...
However, as it requires linking with external libraries, it actually
should be ste on Makefile level.
2016-07-02 14:57:42 +03:00
ae184cb9de
py/builtinimport: Disable "imported as namespace package" warning.
...
Namespace packages are natural part of Python3, CPython3 doesn't have such
warning, it made sense only from point of view of Python2 legacy.
2016-07-02 14:45:49 +03:00
c880f91ac0
extmod/modwebrepl: Add readinto() method.
2016-07-02 14:05:37 +03:00
03b0279c6d
extmod/modwebsocket: Add readinto() method.
2016-07-02 14:03:49 +03:00
92a9078a6f
tests/meminfo: Update for addition of "max free sz" output.
2016-07-01 00:39:26 +03:00
749cbaca7f
py/gc: Calculate (and report) maximum contiguous free block size.
...
Just as maximum allocated block size, it's reported in allocation units
(not bytes).
2016-07-01 00:09:55 +03:00
35962eaab0
esp8266/modpybuart: allow setting baudrate and other params
2016-06-30 18:18:50 +02:00
d1b7ba5dc1
esp8266/websocket_helper.py: Fix typo in debug output.
2016-06-30 13:34:58 +03:00
6a6e0b7e05
py/gc: Be sure to count last allocated block at heap end in stats.
...
Previously, if there was chain of allocated blocks ending with the last
block of heap, it wasn't included in number of 1/2-block or max block
size stats.
2016-06-30 12:56:21 +03:00
6907496016
esp8266/websocket_helper.py: Avoid extra string allocations.
2016-06-30 00:02:45 +03:00
f3636a7b46
stmhal: Enable SD card on L4 MCUs.
2016-06-29 14:29:01 +01:00
b03df60f32
stmhal: Correct DMA to allow SD card on L4 MCUs.
2016-06-29 14:28:49 +01:00
14b7c3e59c
stmhal: Update HALCOMMITS due to change to hal
2016-06-29 14:28:49 +01:00
daa279a3a1
stmhal: Port of f4 hal commit 1d7fb82 to l4 hal
2016-06-29 14:27:55 +01:00
56845b6aff
esp8266/README: Describe how to build mpy-cross.
2016-06-29 14:25:12 +01:00
db80c0ed46
esp8266: Enable frozen bytecode, with scripts in modules/ subdir.
...
To start with, the critical scripts _boot.py and flashbdev.py are frozen
to improve performance and reduce RAM consumption.
Saves about 1000 bytes of heap RAM for a bare boot with filesystem.
2016-06-29 13:59:19 +01:00
b9e3fde21a
qemu-arm: Disable gcc LTO option for nlrthumb.c.
...
If LTO is enabled for nlrthumb.c then gcc optimises away the nlr_push_tail
function when in fact it is needed. So disable this option for this file.
2016-06-28 12:30:26 +01:00
d862a7b811
cc3200: Remove obsolete singleton heart-beat object.
2016-06-28 11:28:53 +01:00
842c2c74c0
cc3200: Allow to compile bootloader with threading enabled.
...
Threading is not used in the bootloader but the config optios are still
enabled so we must exclude including FreeRTOS.h.
2016-06-28 11:28:53 +01:00
469c623bb8
cc3200: Shrink the FreeRTOS heap and place TCB+stack in freed location.
...
The 16k FreeRTOS heap originally had all TCBs and stacks dynamically
allocated within it (plus semaphores and some other things). Now that
xTaskCreateStatic is used instead of xTaskCreate, the TCBs and stacks
are allocated statically and no longer use any of the FreeRTOS heap.
Therefore, the FreeRTOS stack can be shrunk by the amount that has been
made static. Furthermore, the TCBs and stack that are now static should
be placed in the .rtos_heaps section of RAM because this RAM is treated
specially by the bootloader (the bootloader executes from the first 16k
of RAM and loads the firmware into the section starting after the 16k).
After this patch the FreeRTOS heap (ucHeap) is 7200 bytes. The memory
available for the MicroPython heap is 54936 bytes (including GC overhead).
2016-06-28 11:28:53 +01:00
e098eac195
cc3200: Start the simplelink spawn task using the static task creator.
...
In VStartSimpleLinkSpawnTask we change xTaskCreate to xTaskCreateStatic
so that the task is created using statically allocated memory for the TCB
and stack.
This means that xTaskCreate function is no longer needed (the static
version is now used exclusively).
2016-06-28 11:28:53 +01:00
5b8e884573
cc3200: Remove .boot section attribute from osi_TaskCreate function.
...
This function is no longer used. Having the .boot section attribute
meant that it was included in the firmware regargless of use. Without
this attribute the linker can remove the function.
2016-06-28 11:28:53 +01:00
1d5aa9d245
cc3200: In FreeRTOSConfig.h, comment on configSUPPORT_STATIC_ALLOCATION.
...
This config variable is now needed regardless of whether threading is
enabled or not.
2016-06-28 11:28:53 +01:00
8b9ddf4031
tests/thread: Allow some tests to run on ports with not much heap.
2016-06-28 11:28:52 +01:00
63d05228a3
tests/thread: Allow thread_sleep1 to run without floating point.
2016-06-28 11:28:52 +01:00
53562213c8
cc3200: Enable the GIL.
2016-06-28 11:28:52 +01:00
fa2ac93c3a
cc3200/mpthreadport: Move mem alloc outside the thread_mutex lock.
...
Otherwise there could be a deadlock, with the GC's mutex and
thread_mutex.
2016-06-28 11:28:52 +01:00
757146efe3
cc3200/mpthreadport: Scan more root pointers from thread data.
2016-06-28 11:28:52 +01:00
17886828c8
cc3200/gccollect: Use MP_STATE_THREAD(stack_top) to get top of stack.
2016-06-28 11:28:52 +01:00
3b0fbfe4e5
cc3200/mpthreadport: Properly initialise the main thread's data.
2016-06-28 11:28:52 +01:00
27241293c4
cc3200/mpthreadport: Make mutex statically allocated.
...
Reduced the need for the FreeRTOS heap to allocate the mutex.
2016-06-28 11:28:52 +01:00
0455755296
cc3200: Use xTaskCreateStatic instead of osi_TaskCreate.
...
This allows to statically allocate the TCB (thread control block) and
thread stack in the BSS segment, reducing the need for dynamic memory
allocation.
2016-06-28 11:28:52 +01:00
77e37ff98b
py/mpthread: Include mpstate.h when defining GIL macros.
2016-06-28 11:28:52 +01:00
15e68277c1
tests/thread: Make sure that thread tests don't rely on floating point.
2016-06-28 11:28:52 +01:00
5b7789d519
tests/thread: Make stack-size test run correctly and reliable on uPy.
2016-06-28 11:28:52 +01:00
94238d4ae5
py/nlrsetjmp: Update to take into account new location of nlr_top.
...
It's now accessed via the MP_STATE_THREAD macro.
2016-06-28 11:28:52 +01:00
1df4168c33
py/nlrthumb: Convert NLR thumb funcs from asm to C with inline-asm.
...
Now only the bits that really need to be written in assembler are written
in it, otherwise C is used. This means that the assembler code no longer
needs to know about the global state structure which makes it much easier
to maintain.
2016-06-28 11:28:52 +01:00
c9520c591b
cc3200: Fix call to new exception to be _msg instead of _arg1.
2016-06-28 11:28:51 +01:00
df95f52583
py/modthread: Allow to properly set the stack limit of a thread.
...
We rely on the port setting and adjusting the stack size so there is
enough room to recover from hitting the stack limit.
2016-06-28 11:28:51 +01:00
eef4f13a33
cc3200: Add basic threading capabilities.
...
Can create a new thread and run it. Does not use the GIL at this point.
2016-06-28 11:28:51 +01:00
Paul Sokolovsky