alistair23-linux/drivers/gpu/drm/i915/i915_dma.c

1929 lines
50 KiB
C
Raw Normal View History

/* i915_dma.c -- DMA support for the I915 -*- linux-c -*-
*/
/*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#include "drmP.h"
#include "drm.h"
#include "drm_crtc_helper.h"
#include "drm_fb_helper.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include "i915_trace.h"
#include <linux/vgaarb.h>
#include <linux/acpi.h>
#include <linux/pnp.h>
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-31 22:38:10 -07:00
#include <linux/vga_switcheroo.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
#include <linux/slab.h>
/* Really want an OS-independent resettable timer. Would like to have
* this loop run for (eg) 3 sec, but have the timer reset every time
* the head pointer changes, so that EBUSY only happens if the ring
* actually stalls for (eg) 3 seconds.
*/
int i915_wait_ring(struct drm_device * dev, int n, const char *caller)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_ring_buffer_t *ring = &(dev_priv->ring);
u32 acthd_reg = IS_I965G(dev) ? ACTHD_I965 : ACTHD;
u32 last_acthd = I915_READ(acthd_reg);
u32 acthd;
u32 last_head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
int i;
trace_i915_ring_wait_begin (dev);
for (i = 0; i < 100000; i++) {
ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
acthd = I915_READ(acthd_reg);
ring->space = ring->head - (ring->tail + 8);
if (ring->space < 0)
ring->space += ring->Size;
if (ring->space >= n) {
trace_i915_ring_wait_end (dev);
return 0;
}
if (dev->primary->master) {
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
if (master_priv->sarea_priv)
master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
}
if (ring->head != last_head)
i = 0;
if (acthd != last_acthd)
i = 0;
last_head = ring->head;
last_acthd = acthd;
msleep_interruptible(10);
}
trace_i915_ring_wait_end (dev);
return -EBUSY;
}
/* As a ringbuffer is only allowed to wrap between instructions, fill
* the tail with NOOPs.
*/
int i915_wrap_ring(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
volatile unsigned int *virt;
int rem;
rem = dev_priv->ring.Size - dev_priv->ring.tail;
if (dev_priv->ring.space < rem) {
int ret = i915_wait_ring(dev, rem, __func__);
if (ret)
return ret;
}
dev_priv->ring.space -= rem;
virt = (unsigned int *)
(dev_priv->ring.virtual_start + dev_priv->ring.tail);
rem /= 4;
while (rem--)
*virt++ = MI_NOOP;
dev_priv->ring.tail = 0;
return 0;
}
/**
* Sets up the hardware status page for devices that need a physical address
* in the register.
*/
static int i915_init_phys_hws(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
/* Program Hardware Status Page */
dev_priv->status_page_dmah =
drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE);
if (!dev_priv->status_page_dmah) {
DRM_ERROR("Can not allocate hardware status page\n");
return -ENOMEM;
}
dev_priv->hw_status_page = dev_priv->status_page_dmah->vaddr;
dev_priv->dma_status_page = dev_priv->status_page_dmah->busaddr;
memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
if (IS_I965G(dev))
dev_priv->dma_status_page |= (dev_priv->dma_status_page >> 28) &
0xf0;
I915_WRITE(HWS_PGA, dev_priv->dma_status_page);
DRM_DEBUG_DRIVER("Enabled hardware status page\n");
return 0;
}
/**
* Frees the hardware status page, whether it's a physical address or a virtual
* address set up by the X Server.
*/
static void i915_free_hws(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
if (dev_priv->status_page_dmah) {
drm_pci_free(dev, dev_priv->status_page_dmah);
dev_priv->status_page_dmah = NULL;
}
if (dev_priv->status_gfx_addr) {
dev_priv->status_gfx_addr = 0;
drm_core_ioremapfree(&dev_priv->hws_map, dev);
}
/* Need to rewrite hardware status page */
I915_WRITE(HWS_PGA, 0x1ffff000);
}
void i915_kernel_lost_context(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv;
drm_i915_ring_buffer_t *ring = &(dev_priv->ring);
/*
* We should never lose context on the ring with modesetting
* as we don't expose it to userspace
*/
if (drm_core_check_feature(dev, DRIVER_MODESET))
return;
ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
ring->space = ring->head - (ring->tail + 8);
if (ring->space < 0)
ring->space += ring->Size;
if (!dev->primary->master)
return;
master_priv = dev->primary->master->driver_priv;
if (ring->head == ring->tail && master_priv->sarea_priv)
master_priv->sarea_priv->perf_boxes |= I915_BOX_RING_EMPTY;
}
static int i915_dma_cleanup(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
/* Make sure interrupts are disabled here because the uninstall ioctl
* may not have been called from userspace and after dev_private
* is freed, it's too late.
*/
if (dev->irq_enabled)
drm_irq_uninstall(dev);
if (dev_priv->ring.virtual_start) {
drm_core_ioremapfree(&dev_priv->ring.map, dev);
dev_priv->ring.virtual_start = NULL;
dev_priv->ring.map.handle = NULL;
dev_priv->ring.map.size = 0;
}
/* Clear the HWS virtual address at teardown */
if (I915_NEED_GFX_HWS(dev))
i915_free_hws(dev);
return 0;
}
static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
master_priv->sarea = drm_getsarea(dev);
if (master_priv->sarea) {
master_priv->sarea_priv = (drm_i915_sarea_t *)
((u8 *)master_priv->sarea->handle + init->sarea_priv_offset);
} else {
DRM_DEBUG_DRIVER("sarea not found assuming DRI2 userspace\n");
}
if (init->ring_size != 0) {
if (dev_priv->ring.ring_obj != NULL) {
i915_dma_cleanup(dev);
DRM_ERROR("Client tried to initialize ringbuffer in "
"GEM mode\n");
return -EINVAL;
}
dev_priv->ring.Size = init->ring_size;
dev_priv->ring.map.offset = init->ring_start;
dev_priv->ring.map.size = init->ring_size;
dev_priv->ring.map.type = 0;
dev_priv->ring.map.flags = 0;
dev_priv->ring.map.mtrr = 0;
drm_core_ioremap_wc(&dev_priv->ring.map, dev);
if (dev_priv->ring.map.handle == NULL) {
i915_dma_cleanup(dev);
DRM_ERROR("can not ioremap virtual address for"
" ring buffer\n");
return -ENOMEM;
}
}
dev_priv->ring.virtual_start = dev_priv->ring.map.handle;
dev_priv->cpp = init->cpp;
dev_priv->back_offset = init->back_offset;
dev_priv->front_offset = init->front_offset;
dev_priv->current_page = 0;
if (master_priv->sarea_priv)
master_priv->sarea_priv->pf_current_page = 0;
/* Allow hardware batchbuffers unless told otherwise.
*/
dev_priv->allow_batchbuffer = 1;
return 0;
}
static int i915_dma_resume(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
DRM_DEBUG_DRIVER("%s\n", __func__);
if (dev_priv->ring.map.handle == NULL) {
DRM_ERROR("can not ioremap virtual address for"
" ring buffer\n");
return -ENOMEM;
}
/* Program Hardware Status Page */
if (!dev_priv->hw_status_page) {
DRM_ERROR("Can not find hardware status page\n");
return -EINVAL;
}
DRM_DEBUG_DRIVER("hw status page @ %p\n",
dev_priv->hw_status_page);
if (dev_priv->status_gfx_addr != 0)
I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
else
I915_WRITE(HWS_PGA, dev_priv->dma_status_page);
DRM_DEBUG_DRIVER("Enabled hardware status page\n");
return 0;
}
static int i915_dma_init(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_init_t *init = data;
int retcode = 0;
switch (init->func) {
case I915_INIT_DMA:
retcode = i915_initialize(dev, init);
break;
case I915_CLEANUP_DMA:
retcode = i915_dma_cleanup(dev);
break;
case I915_RESUME_DMA:
retcode = i915_dma_resume(dev);
break;
default:
retcode = -EINVAL;
break;
}
return retcode;
}
/* Implement basically the same security restrictions as hardware does
* for MI_BATCH_NON_SECURE. These can be made stricter at any time.
*
* Most of the calculations below involve calculating the size of a
* particular instruction. It's important to get the size right as
* that tells us where the next instruction to check is. Any illegal
* instruction detected will be given a size of zero, which is a
* signal to abort the rest of the buffer.
*/
static int do_validate_cmd(int cmd)
{
switch (((cmd >> 29) & 0x7)) {
case 0x0:
switch ((cmd >> 23) & 0x3f) {
case 0x0:
return 1; /* MI_NOOP */
case 0x4:
return 1; /* MI_FLUSH */
default:
return 0; /* disallow everything else */
}
break;
case 0x1:
return 0; /* reserved */
case 0x2:
return (cmd & 0xff) + 2; /* 2d commands */
case 0x3:
if (((cmd >> 24) & 0x1f) <= 0x18)
return 1;
switch ((cmd >> 24) & 0x1f) {
case 0x1c:
return 1;
case 0x1d:
switch ((cmd >> 16) & 0xff) {
case 0x3:
return (cmd & 0x1f) + 2;
case 0x4:
return (cmd & 0xf) + 2;
default:
return (cmd & 0xffff) + 2;
}
case 0x1e:
if (cmd & (1 << 23))
return (cmd & 0xffff) + 1;
else
return 1;
case 0x1f:
if ((cmd & (1 << 23)) == 0) /* inline vertices */
return (cmd & 0x1ffff) + 2;
else if (cmd & (1 << 17)) /* indirect random */
if ((cmd & 0xffff) == 0)
return 0; /* unknown length, too hard */
else
return (((cmd & 0xffff) + 1) / 2) + 1;
else
return 2; /* indirect sequential */
default:
return 0;
}
default:
return 0;
}
return 0;
}
static int validate_cmd(int cmd)
{
int ret = do_validate_cmd(cmd);
/* printk("validate_cmd( %x ): %d\n", cmd, ret); */
return ret;
}
static int i915_emit_cmds(struct drm_device * dev, int *buffer, int dwords)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int i;
RING_LOCALS;
if ((dwords+1) * sizeof(int) >= dev_priv->ring.Size - 8)
return -EINVAL;
BEGIN_LP_RING((dwords+1)&~1);
for (i = 0; i < dwords;) {
int cmd, sz;
cmd = buffer[i];
if ((sz = validate_cmd(cmd)) == 0 || i + sz > dwords)
return -EINVAL;
OUT_RING(cmd);
while (++i, --sz) {
OUT_RING(buffer[i]);
}
}
if (dwords & 1)
OUT_RING(0);
ADVANCE_LP_RING();
return 0;
}
int
i915_emit_box(struct drm_device *dev,
struct drm_clip_rect *boxes,
int i, int DR1, int DR4)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_clip_rect box = boxes[i];
RING_LOCALS;
if (box.y2 <= box.y1 || box.x2 <= box.x1 || box.y2 <= 0 || box.x2 <= 0) {
DRM_ERROR("Bad box %d,%d..%d,%d\n",
box.x1, box.y1, box.x2, box.y2);
return -EINVAL;
}
if (IS_I965G(dev)) {
BEGIN_LP_RING(4);
OUT_RING(GFX_OP_DRAWRECT_INFO_I965);
OUT_RING((box.x1 & 0xffff) | (box.y1 << 16));
OUT_RING(((box.x2 - 1) & 0xffff) | ((box.y2 - 1) << 16));
OUT_RING(DR4);
ADVANCE_LP_RING();
} else {
BEGIN_LP_RING(6);
OUT_RING(GFX_OP_DRAWRECT_INFO);
OUT_RING(DR1);
OUT_RING((box.x1 & 0xffff) | (box.y1 << 16));
OUT_RING(((box.x2 - 1) & 0xffff) | ((box.y2 - 1) << 16));
OUT_RING(DR4);
OUT_RING(0);
ADVANCE_LP_RING();
}
return 0;
}
/* XXX: Emitting the counter should really be moved to part of the IRQ
* emit. For now, do it in both places:
*/
static void i915_emit_breadcrumb(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
RING_LOCALS;
dev_priv->counter++;
if (dev_priv->counter > 0x7FFFFFFFUL)
dev_priv->counter = 0;
if (master_priv->sarea_priv)
master_priv->sarea_priv->last_enqueue = dev_priv->counter;
BEGIN_LP_RING(4);
OUT_RING(MI_STORE_DWORD_INDEX);
OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
OUT_RING(dev_priv->counter);
OUT_RING(0);
ADVANCE_LP_RING();
}
static int i915_dispatch_cmdbuffer(struct drm_device * dev,
drm_i915_cmdbuffer_t *cmd,
struct drm_clip_rect *cliprects,
void *cmdbuf)
{
int nbox = cmd->num_cliprects;
int i = 0, count, ret;
if (cmd->sz & 0x3) {
DRM_ERROR("alignment");
return -EINVAL;
}
i915_kernel_lost_context(dev);
count = nbox ? nbox : 1;
for (i = 0; i < count; i++) {
if (i < nbox) {
ret = i915_emit_box(dev, cliprects, i,
cmd->DR1, cmd->DR4);
if (ret)
return ret;
}
ret = i915_emit_cmds(dev, cmdbuf, cmd->sz / 4);
if (ret)
return ret;
}
i915_emit_breadcrumb(dev);
return 0;
}
static int i915_dispatch_batchbuffer(struct drm_device * dev,
drm_i915_batchbuffer_t * batch,
struct drm_clip_rect *cliprects)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int nbox = batch->num_cliprects;
int i = 0, count;
RING_LOCALS;
if ((batch->start | batch->used) & 0x7) {
DRM_ERROR("alignment");
return -EINVAL;
}
i915_kernel_lost_context(dev);
count = nbox ? nbox : 1;
for (i = 0; i < count; i++) {
if (i < nbox) {
int ret = i915_emit_box(dev, cliprects, i,
batch->DR1, batch->DR4);
if (ret)
return ret;
}
if (!IS_I830(dev) && !IS_845G(dev)) {
BEGIN_LP_RING(2);
if (IS_I965G(dev)) {
OUT_RING(MI_BATCH_BUFFER_START | (2 << 6) | MI_BATCH_NON_SECURE_I965);
OUT_RING(batch->start);
} else {
OUT_RING(MI_BATCH_BUFFER_START | (2 << 6));
OUT_RING(batch->start | MI_BATCH_NON_SECURE);
}
ADVANCE_LP_RING();
} else {
BEGIN_LP_RING(4);
OUT_RING(MI_BATCH_BUFFER);
OUT_RING(batch->start | MI_BATCH_NON_SECURE);
OUT_RING(batch->start + batch->used - 4);
OUT_RING(0);
ADVANCE_LP_RING();
}
}
i915_emit_breadcrumb(dev);
return 0;
}
static int i915_dispatch_flip(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv =
dev->primary->master->driver_priv;
RING_LOCALS;
if (!master_priv->sarea_priv)
return -EINVAL;
DRM_DEBUG_DRIVER("%s: page=%d pfCurrentPage=%d\n",
__func__,
dev_priv->current_page,
master_priv->sarea_priv->pf_current_page);
i915_kernel_lost_context(dev);
BEGIN_LP_RING(2);
OUT_RING(MI_FLUSH | MI_READ_FLUSH);
OUT_RING(0);
ADVANCE_LP_RING();
BEGIN_LP_RING(6);
OUT_RING(CMD_OP_DISPLAYBUFFER_INFO | ASYNC_FLIP);
OUT_RING(0);
if (dev_priv->current_page == 0) {
OUT_RING(dev_priv->back_offset);
dev_priv->current_page = 1;
} else {
OUT_RING(dev_priv->front_offset);
dev_priv->current_page = 0;
}
OUT_RING(0);
ADVANCE_LP_RING();
BEGIN_LP_RING(2);
OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_PLANE_A_FLIP);
OUT_RING(0);
ADVANCE_LP_RING();
master_priv->sarea_priv->last_enqueue = dev_priv->counter++;
BEGIN_LP_RING(4);
OUT_RING(MI_STORE_DWORD_INDEX);
OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
OUT_RING(dev_priv->counter);
OUT_RING(0);
ADVANCE_LP_RING();
master_priv->sarea_priv->pf_current_page = dev_priv->current_page;
return 0;
}
static int i915_quiescent(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
i915_kernel_lost_context(dev);
return i915_wait_ring(dev, dev_priv->ring.Size - 8, __func__);
}
static int i915_flush_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
int ret;
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
mutex_lock(&dev->struct_mutex);
ret = i915_quiescent(dev);
mutex_unlock(&dev->struct_mutex);
return ret;
}
static int i915_batchbuffer(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
master_priv->sarea_priv;
drm_i915_batchbuffer_t *batch = data;
int ret;
struct drm_clip_rect *cliprects = NULL;
if (!dev_priv->allow_batchbuffer) {
DRM_ERROR("Batchbuffer ioctl disabled\n");
return -EINVAL;
}
DRM_DEBUG_DRIVER("i915 batchbuffer, start %x used %d cliprects %d\n",
batch->start, batch->used, batch->num_cliprects);
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
if (batch->num_cliprects < 0)
return -EINVAL;
if (batch->num_cliprects) {
cliprects = kcalloc(batch->num_cliprects,
sizeof(struct drm_clip_rect),
GFP_KERNEL);
if (cliprects == NULL)
return -ENOMEM;
ret = copy_from_user(cliprects, batch->cliprects,
batch->num_cliprects *
sizeof(struct drm_clip_rect));
if (ret != 0)
goto fail_free;
}
mutex_lock(&dev->struct_mutex);
ret = i915_dispatch_batchbuffer(dev, batch, cliprects);
mutex_unlock(&dev->struct_mutex);
if (sarea_priv)
sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
fail_free:
kfree(cliprects);
return ret;
}
static int i915_cmdbuffer(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
master_priv->sarea_priv;
drm_i915_cmdbuffer_t *cmdbuf = data;
struct drm_clip_rect *cliprects = NULL;
void *batch_data;
int ret;
DRM_DEBUG_DRIVER("i915 cmdbuffer, buf %p sz %d cliprects %d\n",
cmdbuf->buf, cmdbuf->sz, cmdbuf->num_cliprects);
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
if (cmdbuf->num_cliprects < 0)
return -EINVAL;
batch_data = kmalloc(cmdbuf->sz, GFP_KERNEL);
if (batch_data == NULL)
return -ENOMEM;
ret = copy_from_user(batch_data, cmdbuf->buf, cmdbuf->sz);
if (ret != 0)
goto fail_batch_free;
if (cmdbuf->num_cliprects) {
cliprects = kcalloc(cmdbuf->num_cliprects,
sizeof(struct drm_clip_rect), GFP_KERNEL);
if (cliprects == NULL) {
ret = -ENOMEM;
goto fail_batch_free;
}
ret = copy_from_user(cliprects, cmdbuf->cliprects,
cmdbuf->num_cliprects *
sizeof(struct drm_clip_rect));
if (ret != 0)
goto fail_clip_free;
}
mutex_lock(&dev->struct_mutex);
ret = i915_dispatch_cmdbuffer(dev, cmdbuf, cliprects, batch_data);
mutex_unlock(&dev->struct_mutex);
if (ret) {
DRM_ERROR("i915_dispatch_cmdbuffer failed\n");
goto fail_clip_free;
}
if (sarea_priv)
sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
fail_clip_free:
kfree(cliprects);
fail_batch_free:
kfree(batch_data);
return ret;
}
static int i915_flip_bufs(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
int ret;
DRM_DEBUG_DRIVER("%s\n", __func__);
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
mutex_lock(&dev->struct_mutex);
ret = i915_dispatch_flip(dev);
mutex_unlock(&dev->struct_mutex);
return ret;
}
static int i915_getparam(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_getparam_t *param = data;
int value;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
switch (param->param) {
case I915_PARAM_IRQ_ACTIVE:
value = dev->pdev->irq ? 1 : 0;
break;
case I915_PARAM_ALLOW_BATCHBUFFER:
value = dev_priv->allow_batchbuffer ? 1 : 0;
break;
case I915_PARAM_LAST_DISPATCH:
value = READ_BREADCRUMB(dev_priv);
break;
case I915_PARAM_CHIPSET_ID:
value = dev->pci_device;
break;
case I915_PARAM_HAS_GEM:
value = dev_priv->has_gem;
break;
case I915_PARAM_NUM_FENCES_AVAIL:
value = dev_priv->num_fence_regs - dev_priv->fence_reg_start;
break;
case I915_PARAM_HAS_OVERLAY:
value = dev_priv->overlay ? 1 : 0;
break;
case I915_PARAM_HAS_PAGEFLIPPING:
value = 1;
break;
case I915_PARAM_HAS_EXECBUF2:
/* depends on GEM */
value = dev_priv->has_gem;
break;
default:
DRM_DEBUG_DRIVER("Unknown parameter %d\n",
param->param);
return -EINVAL;
}
if (DRM_COPY_TO_USER(param->value, &value, sizeof(int))) {
DRM_ERROR("DRM_COPY_TO_USER failed\n");
return -EFAULT;
}
return 0;
}
static int i915_setparam(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_setparam_t *param = data;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
switch (param->param) {
case I915_SETPARAM_USE_MI_BATCHBUFFER_START:
break;
case I915_SETPARAM_TEX_LRU_LOG_GRANULARITY:
dev_priv->tex_lru_log_granularity = param->value;
break;
case I915_SETPARAM_ALLOW_BATCHBUFFER:
dev_priv->allow_batchbuffer = param->value;
break;
case I915_SETPARAM_NUM_USED_FENCES:
if (param->value > dev_priv->num_fence_regs ||
param->value < 0)
return -EINVAL;
/* Userspace can use first N regs */
dev_priv->fence_reg_start = param->value;
break;
default:
DRM_DEBUG_DRIVER("unknown parameter %d\n",
param->param);
return -EINVAL;
}
return 0;
}
static int i915_set_status_page(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_hws_addr_t *hws = data;
if (!I915_NEED_GFX_HWS(dev))
return -EINVAL;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
WARN(1, "tried to set status page when mode setting active\n");
return 0;
}
DRM_DEBUG_DRIVER("set status page addr 0x%08x\n", (u32)hws->addr);
dev_priv->status_gfx_addr = hws->addr & (0x1ffff<<12);
dev_priv->hws_map.offset = dev->agp->base + hws->addr;
dev_priv->hws_map.size = 4*1024;
dev_priv->hws_map.type = 0;
dev_priv->hws_map.flags = 0;
dev_priv->hws_map.mtrr = 0;
drm_core_ioremap_wc(&dev_priv->hws_map, dev);
if (dev_priv->hws_map.handle == NULL) {
i915_dma_cleanup(dev);
dev_priv->status_gfx_addr = 0;
DRM_ERROR("can not ioremap virtual address for"
" G33 hw status page\n");
return -ENOMEM;
}
dev_priv->hw_status_page = dev_priv->hws_map.handle;
memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
DRM_DEBUG_DRIVER("load hws HWS_PGA with gfx mem 0x%x\n",
dev_priv->status_gfx_addr);
DRM_DEBUG_DRIVER("load hws at %p\n",
dev_priv->hw_status_page);
return 0;
}
static int i915_get_bridge_dev(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
if (!dev_priv->bridge_dev) {
DRM_ERROR("bridge device not found\n");
return -1;
}
return 0;
}
#define MCHBAR_I915 0x44
#define MCHBAR_I965 0x48
#define MCHBAR_SIZE (4*4096)
#define DEVEN_REG 0x54
#define DEVEN_MCHBAR_EN (1 << 28)
/* Allocate space for the MCH regs if needed, return nonzero on error */
static int
intel_alloc_mchbar_resource(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915;
u32 temp_lo, temp_hi = 0;
u64 mchbar_addr;
int ret = 0;
if (IS_I965G(dev))
pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi);
pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo);
mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
/* If ACPI doesn't have it, assume we need to allocate it ourselves */
#ifdef CONFIG_PNP
if (mchbar_addr &&
pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) {
ret = 0;
goto out;
}
#endif
/* Get some space for it */
ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus, &dev_priv->mch_res,
MCHBAR_SIZE, MCHBAR_SIZE,
PCIBIOS_MIN_MEM,
0, pcibios_align_resource,
dev_priv->bridge_dev);
if (ret) {
DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret);
dev_priv->mch_res.start = 0;
goto out;
}
if (IS_I965G(dev))
pci_write_config_dword(dev_priv->bridge_dev, reg + 4,
upper_32_bits(dev_priv->mch_res.start));
pci_write_config_dword(dev_priv->bridge_dev, reg,
lower_32_bits(dev_priv->mch_res.start));
out:
return ret;
}
/* Setup MCHBAR if possible, return true if we should disable it again */
static void
intel_setup_mchbar(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int mchbar_reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915;
u32 temp;
bool enabled;
dev_priv->mchbar_need_disable = false;
if (IS_I915G(dev) || IS_I915GM(dev)) {
pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
enabled = !!(temp & DEVEN_MCHBAR_EN);
} else {
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
enabled = temp & 1;
}
/* If it's already enabled, don't have to do anything */
if (enabled)
return;
if (intel_alloc_mchbar_resource(dev))
return;
dev_priv->mchbar_need_disable = true;
/* Space is allocated or reserved, so enable it. */
if (IS_I915G(dev) || IS_I915GM(dev)) {
pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG,
temp | DEVEN_MCHBAR_EN);
} else {
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1);
}
}
static void
intel_teardown_mchbar(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int mchbar_reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915;
u32 temp;
if (dev_priv->mchbar_need_disable) {
if (IS_I915G(dev) || IS_I915GM(dev)) {
pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
temp &= ~DEVEN_MCHBAR_EN;
pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG, temp);
} else {
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
temp &= ~1;
pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp);
}
}
if (dev_priv->mch_res.start)
release_resource(&dev_priv->mch_res);
}
/**
* i915_probe_agp - get AGP bootup configuration
* @pdev: PCI device
* @aperture_size: returns AGP aperture configured size
* @preallocated_size: returns size of BIOS preallocated AGP space
*
* Since Intel integrated graphics are UMA, the BIOS has to set aside
* some RAM for the framebuffer at early boot. This code figures out
* how much was set aside so we can use it for our own purposes.
*/
static int i915_probe_agp(struct drm_device *dev, uint32_t *aperture_size,
uint32_t *preallocated_size,
uint32_t *start)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u16 tmp = 0;
unsigned long overhead;
unsigned long stolen;
/* Get the fb aperture size and "stolen" memory amount. */
pci_read_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, &tmp);
*aperture_size = 1024 * 1024;
*preallocated_size = 1024 * 1024;
switch (dev->pdev->device) {
case PCI_DEVICE_ID_INTEL_82830_CGC:
case PCI_DEVICE_ID_INTEL_82845G_IG:
case PCI_DEVICE_ID_INTEL_82855GM_IG:
case PCI_DEVICE_ID_INTEL_82865_IG:
if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
*aperture_size *= 64;
else
*aperture_size *= 128;
break;
default:
/* 9xx supports large sizes, just look at the length */
*aperture_size = pci_resource_len(dev->pdev, 2);
break;
}
/*
* Some of the preallocated space is taken by the GTT
* and popup. GTT is 1K per MB of aperture size, and popup is 4K.
*/
if (IS_G4X(dev) || IS_PINEVIEW(dev) || IS_IRONLAKE(dev) || IS_GEN6(dev))
overhead = 4096;
else
overhead = (*aperture_size / 1024) + 4096;
if (IS_GEN6(dev)) {
/* SNB has memory control reg at 0x50.w */
pci_read_config_word(dev->pdev, SNB_GMCH_CTRL, &tmp);
switch (tmp & SNB_GMCH_GMS_STOLEN_MASK) {
case INTEL_855_GMCH_GMS_DISABLED:
DRM_ERROR("video memory is disabled\n");
return -1;
case SNB_GMCH_GMS_STOLEN_32M:
stolen = 32 * 1024 * 1024;
break;
case SNB_GMCH_GMS_STOLEN_64M:
stolen = 64 * 1024 * 1024;
break;
case SNB_GMCH_GMS_STOLEN_96M:
stolen = 96 * 1024 * 1024;
break;
case SNB_GMCH_GMS_STOLEN_128M:
stolen = 128 * 1024 * 1024;
break;
case SNB_GMCH_GMS_STOLEN_160M:
stolen = 160 * 1024 * 1024;
break;
case SNB_GMCH_GMS_STOLEN_192M:
stolen = 192 * 1024 * 1024;
break;
case SNB_GMCH_GMS_STOLEN_224M:
stolen = 224 * 1024 * 1024;
break;
case SNB_GMCH_GMS_STOLEN_256M:
stolen = 256 * 1024 * 1024;
break;
case SNB_GMCH_GMS_STOLEN_288M:
stolen = 288 * 1024 * 1024;
break;
case SNB_GMCH_GMS_STOLEN_320M:
stolen = 320 * 1024 * 1024;
break;
case SNB_GMCH_GMS_STOLEN_352M:
stolen = 352 * 1024 * 1024;
break;
case SNB_GMCH_GMS_STOLEN_384M:
stolen = 384 * 1024 * 1024;
break;
case SNB_GMCH_GMS_STOLEN_416M:
stolen = 416 * 1024 * 1024;
break;
case SNB_GMCH_GMS_STOLEN_448M:
stolen = 448 * 1024 * 1024;
break;
case SNB_GMCH_GMS_STOLEN_480M:
stolen = 480 * 1024 * 1024;
break;
case SNB_GMCH_GMS_STOLEN_512M:
stolen = 512 * 1024 * 1024;
break;
default:
DRM_ERROR("unexpected GMCH_GMS value: 0x%02x\n",
tmp & SNB_GMCH_GMS_STOLEN_MASK);
return -1;
}
} else {
switch (tmp & INTEL_GMCH_GMS_MASK) {
case INTEL_855_GMCH_GMS_DISABLED:
DRM_ERROR("video memory is disabled\n");
return -1;
case INTEL_855_GMCH_GMS_STOLEN_1M:
stolen = 1 * 1024 * 1024;
break;
case INTEL_855_GMCH_GMS_STOLEN_4M:
stolen = 4 * 1024 * 1024;
break;
case INTEL_855_GMCH_GMS_STOLEN_8M:
stolen = 8 * 1024 * 1024;
break;
case INTEL_855_GMCH_GMS_STOLEN_16M:
stolen = 16 * 1024 * 1024;
break;
case INTEL_855_GMCH_GMS_STOLEN_32M:
stolen = 32 * 1024 * 1024;
break;
case INTEL_915G_GMCH_GMS_STOLEN_48M:
stolen = 48 * 1024 * 1024;
break;
case INTEL_915G_GMCH_GMS_STOLEN_64M:
stolen = 64 * 1024 * 1024;
break;
case INTEL_GMCH_GMS_STOLEN_128M:
stolen = 128 * 1024 * 1024;
break;
case INTEL_GMCH_GMS_STOLEN_256M:
stolen = 256 * 1024 * 1024;
break;
case INTEL_GMCH_GMS_STOLEN_96M:
stolen = 96 * 1024 * 1024;
break;
case INTEL_GMCH_GMS_STOLEN_160M:
stolen = 160 * 1024 * 1024;
break;
case INTEL_GMCH_GMS_STOLEN_224M:
stolen = 224 * 1024 * 1024;
break;
case INTEL_GMCH_GMS_STOLEN_352M:
stolen = 352 * 1024 * 1024;
break;
default:
DRM_ERROR("unexpected GMCH_GMS value: 0x%02x\n",
tmp & INTEL_GMCH_GMS_MASK);
return -1;
}
}
*preallocated_size = stolen - overhead;
*start = overhead;
return 0;
}
#define PTE_ADDRESS_MASK 0xfffff000
#define PTE_ADDRESS_MASK_HIGH 0x000000f0 /* i915+ */
#define PTE_MAPPING_TYPE_UNCACHED (0 << 1)
#define PTE_MAPPING_TYPE_DCACHE (1 << 1) /* i830 only */
#define PTE_MAPPING_TYPE_CACHED (3 << 1)
#define PTE_MAPPING_TYPE_MASK (3 << 1)
#define PTE_VALID (1 << 0)
/**
* i915_gtt_to_phys - take a GTT address and turn it into a physical one
* @dev: drm device
* @gtt_addr: address to translate
*
* Some chip functions require allocations from stolen space but need the
* physical address of the memory in question. We use this routine
* to get a physical address suitable for register programming from a given
* GTT address.
*/
static unsigned long i915_gtt_to_phys(struct drm_device *dev,
unsigned long gtt_addr)
{
unsigned long *gtt;
unsigned long entry, phys;
int gtt_bar = IS_I9XX(dev) ? 0 : 1;
int gtt_offset, gtt_size;
if (IS_I965G(dev)) {
if (IS_G4X(dev) || IS_IRONLAKE(dev) || IS_GEN6(dev)) {
gtt_offset = 2*1024*1024;
gtt_size = 2*1024*1024;
} else {
gtt_offset = 512*1024;
gtt_size = 512*1024;
}
} else {
gtt_bar = 3;
gtt_offset = 0;
gtt_size = pci_resource_len(dev->pdev, gtt_bar);
}
gtt = ioremap_wc(pci_resource_start(dev->pdev, gtt_bar) + gtt_offset,
gtt_size);
if (!gtt) {
DRM_ERROR("ioremap of GTT failed\n");
return 0;
}
entry = *(volatile u32 *)(gtt + (gtt_addr / 1024));
DRM_DEBUG_DRIVER("GTT addr: 0x%08lx, PTE: 0x%08lx\n", gtt_addr, entry);
/* Mask out these reserved bits on this hardware. */
if (!IS_I9XX(dev) || IS_I915G(dev) || IS_I915GM(dev) ||
IS_I945G(dev) || IS_I945GM(dev)) {
entry &= ~PTE_ADDRESS_MASK_HIGH;
}
/* If it's not a mapping type we know, then bail. */
if ((entry & PTE_MAPPING_TYPE_MASK) != PTE_MAPPING_TYPE_UNCACHED &&
(entry & PTE_MAPPING_TYPE_MASK) != PTE_MAPPING_TYPE_CACHED) {
iounmap(gtt);
return 0;
}
if (!(entry & PTE_VALID)) {
DRM_ERROR("bad GTT entry in stolen space\n");
iounmap(gtt);
return 0;
}
iounmap(gtt);
phys =(entry & PTE_ADDRESS_MASK) |
((uint64_t)(entry & PTE_ADDRESS_MASK_HIGH) << (32 - 4));
DRM_DEBUG_DRIVER("GTT addr: 0x%08lx, phys addr: 0x%08lx\n", gtt_addr, phys);
return phys;
}
static void i915_warn_stolen(struct drm_device *dev)
{
DRM_ERROR("not enough stolen space for compressed buffer, disabling\n");
DRM_ERROR("hint: you may be able to increase stolen memory size in the BIOS to avoid this\n");
}
static void i915_setup_compression(struct drm_device *dev, int size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_mm_node *compressed_fb, *compressed_llb;
unsigned long cfb_base;
unsigned long ll_base = 0;
/* Leave 1M for line length buffer & misc. */
compressed_fb = drm_mm_search_free(&dev_priv->vram, size, 4096, 0);
if (!compressed_fb) {
dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
i915_warn_stolen(dev);
return;
}
compressed_fb = drm_mm_get_block(compressed_fb, size, 4096);
if (!compressed_fb) {
i915_warn_stolen(dev);
dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
return;
}
cfb_base = i915_gtt_to_phys(dev, compressed_fb->start);
if (!cfb_base) {
DRM_ERROR("failed to get stolen phys addr, disabling FBC\n");
drm_mm_put_block(compressed_fb);
}
if (!IS_GM45(dev)) {
compressed_llb = drm_mm_search_free(&dev_priv->vram, 4096,
4096, 0);
if (!compressed_llb) {
i915_warn_stolen(dev);
return;
}
compressed_llb = drm_mm_get_block(compressed_llb, 4096, 4096);
if (!compressed_llb) {
i915_warn_stolen(dev);
return;
}
ll_base = i915_gtt_to_phys(dev, compressed_llb->start);
if (!ll_base) {
DRM_ERROR("failed to get stolen phys addr, disabling FBC\n");
drm_mm_put_block(compressed_fb);
drm_mm_put_block(compressed_llb);
}
}
dev_priv->cfb_size = size;
if (IS_GM45(dev)) {
g4x_disable_fbc(dev);
I915_WRITE(DPFC_CB_BASE, compressed_fb->start);
} else {
i8xx_disable_fbc(dev);
I915_WRITE(FBC_CFB_BASE, cfb_base);
I915_WRITE(FBC_LL_BASE, ll_base);
}
DRM_DEBUG("FBC base 0x%08lx, ll base 0x%08lx, size %dM\n", cfb_base,
ll_base, size >> 20);
}
/* true = enable decode, false = disable decoder */
static unsigned int i915_vga_set_decode(void *cookie, bool state)
{
struct drm_device *dev = cookie;
intel_modeset_vga_set_state(dev, state);
if (state)
return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
else
return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-31 22:38:10 -07:00
static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state)
{
struct drm_device *dev = pci_get_drvdata(pdev);
pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
if (state == VGA_SWITCHEROO_ON) {
printk(KERN_INFO "i915: switched off\n");
/* i915 resume handler doesn't set to D0 */
pci_set_power_state(dev->pdev, PCI_D0);
i915_resume(dev);
} else {
printk(KERN_ERR "i915: switched off\n");
i915_suspend(dev, pmm);
}
}
static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
{
struct drm_device *dev = pci_get_drvdata(pdev);
bool can_switch;
spin_lock(&dev->count_lock);
can_switch = (dev->open_count == 0);
spin_unlock(&dev->count_lock);
return can_switch;
}
static int i915_load_modeset_init(struct drm_device *dev,
unsigned long prealloc_start,
unsigned long prealloc_size,
unsigned long agp_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int fb_bar = IS_I9XX(dev) ? 2 : 0;
int ret = 0;
dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
0xff000000;
/* Basic memrange allocator for stolen space (aka vram) */
drm_mm_init(&dev_priv->vram, 0, prealloc_size);
DRM_INFO("set up %ldM of stolen space\n", prealloc_size / (1024*1024));
/* We're off and running w/KMS */
dev_priv->mm.suspended = 0;
/* Let GEM Manage from end of prealloc space to end of aperture.
*
* However, leave one page at the end still bound to the scratch page.
* There are a number of places where the hardware apparently
* prefetches past the end of the object, and we've seen multiple
* hangs with the GPU head pointer stuck in a batchbuffer bound
* at the last page of the aperture. One page should be enough to
* keep any prefetching inside of the aperture.
*/
i915_gem_do_init(dev, prealloc_size, agp_size - 4096);
mutex_lock(&dev->struct_mutex);
ret = i915_gem_init_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
if (ret)
goto out;
/* Try to set up FBC with a reasonable compressed buffer size */
if (I915_HAS_FBC(dev) && i915_powersave) {
int cfb_size;
/* Try to get an 8M buffer... */
if (prealloc_size > (9*1024*1024))
cfb_size = 8*1024*1024;
else /* fall back to 7/8 of the stolen space */
cfb_size = prealloc_size * 7 / 8;
i915_setup_compression(dev, cfb_size);
}
/* Allow hardware batchbuffers unless told otherwise.
*/
dev_priv->allow_batchbuffer = 1;
ret = intel_init_bios(dev);
if (ret)
DRM_INFO("failed to find VBIOS tables\n");
/* if we have > 1 VGA cards, then disable the radeon VGA resources */
ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
if (ret)
goto destroy_ringbuffer;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-31 22:38:10 -07:00
ret = vga_switcheroo_register_client(dev->pdev,
i915_switcheroo_set_state,
i915_switcheroo_can_switch);
if (ret)
goto destroy_ringbuffer;
intel_modeset_init(dev);
ret = drm_irq_install(dev);
if (ret)
goto destroy_ringbuffer;
/* Always safe in the mode setting case. */
/* FIXME: do pre/post-mode set stuff in core KMS code */
dev->vblank_disable_allowed = 1;
/*
* Initialize the hardware status page IRQ location.
*/
I915_WRITE(INSTPM, (1 << 5) | (1 << 21));
intel_fbdev_init(dev);
return 0;
destroy_ringbuffer:
mutex_lock(&dev->struct_mutex);
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
out:
return ret;
}
int i915_master_create(struct drm_device *dev, struct drm_master *master)
{
struct drm_i915_master_private *master_priv;
master_priv = kzalloc(sizeof(*master_priv), GFP_KERNEL);
if (!master_priv)
return -ENOMEM;
master->driver_priv = master_priv;
return 0;
}
void i915_master_destroy(struct drm_device *dev, struct drm_master *master)
{
struct drm_i915_master_private *master_priv = master->driver_priv;
if (!master_priv)
return;
kfree(master_priv);
master->driver_priv = NULL;
}
static void i915_get_mem_freq(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 tmp;
if (!IS_PINEVIEW(dev))
return;
tmp = I915_READ(CLKCFG);
switch (tmp & CLKCFG_FSB_MASK) {
case CLKCFG_FSB_533:
dev_priv->fsb_freq = 533; /* 133*4 */
break;
case CLKCFG_FSB_800:
dev_priv->fsb_freq = 800; /* 200*4 */
break;
case CLKCFG_FSB_667:
dev_priv->fsb_freq = 667; /* 167*4 */
break;
case CLKCFG_FSB_400:
dev_priv->fsb_freq = 400; /* 100*4 */
break;
}
switch (tmp & CLKCFG_MEM_MASK) {
case CLKCFG_MEM_533:
dev_priv->mem_freq = 533;
break;
case CLKCFG_MEM_667:
dev_priv->mem_freq = 667;
break;
case CLKCFG_MEM_800:
dev_priv->mem_freq = 800;
break;
}
}
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
* @flags: startup flags
*
* The driver load routine has to do several things:
* - drive output discovery via intel_modeset_init()
* - initialize the memory manager
* - allocate initial config memory
* - setup the DRM framebuffer with the allocated memory
*/
int i915_driver_load(struct drm_device *dev, unsigned long flags)
{
struct drm_i915_private *dev_priv;
resource_size_t base, size;
int ret = 0, mmio_bar;
uint32_t agp_size, prealloc_size, prealloc_start;
/* i915 has 4 more counters */
dev->counters += 4;
dev->types[6] = _DRM_STAT_IRQ;
dev->types[7] = _DRM_STAT_PRIMARY;
dev->types[8] = _DRM_STAT_SECONDARY;
dev->types[9] = _DRM_STAT_DMA;
dev_priv = kzalloc(sizeof(drm_i915_private_t), GFP_KERNEL);
if (dev_priv == NULL)
return -ENOMEM;
dev->dev_private = (void *)dev_priv;
dev_priv->dev = dev;
dev_priv->info = (struct intel_device_info *) flags;
/* Add register map (needed for suspend/resume) */
mmio_bar = IS_I9XX(dev) ? 0 : 1;
base = drm_get_resource_start(dev, mmio_bar);
size = drm_get_resource_len(dev, mmio_bar);
if (i915_get_bridge_dev(dev)) {
ret = -EIO;
goto free_priv;
}
dev_priv->regs = ioremap(base, size);
if (!dev_priv->regs) {
DRM_ERROR("failed to map registers\n");
ret = -EIO;
goto put_bridge;
}
dev_priv->mm.gtt_mapping =
io_mapping_create_wc(dev->agp->base,
dev->agp->agp_info.aper_size * 1024*1024);
if (dev_priv->mm.gtt_mapping == NULL) {
ret = -EIO;
goto out_rmmap;
}
/* Set up a WC MTRR for non-PAT systems. This is more common than
* one would think, because the kernel disables PAT on first
* generation Core chips because WC PAT gets overridden by a UC
* MTRR if present. Even if a UC MTRR isn't present.
*/
dev_priv->mm.gtt_mtrr = mtrr_add(dev->agp->base,
dev->agp->agp_info.aper_size *
1024 * 1024,
MTRR_TYPE_WRCOMB, 1);
if (dev_priv->mm.gtt_mtrr < 0) {
DRM_INFO("MTRR allocation failed. Graphics "
"performance may suffer.\n");
}
ret = i915_probe_agp(dev, &agp_size, &prealloc_size, &prealloc_start);
if (ret)
goto out_iomapfree;
dev_priv->wq = create_singlethread_workqueue("i915");
if (dev_priv->wq == NULL) {
DRM_ERROR("Failed to create our workqueue.\n");
ret = -ENOMEM;
goto out_iomapfree;
}
/* enable GEM by default */
dev_priv->has_gem = 1;
if (prealloc_size > agp_size * 3 / 4) {
DRM_ERROR("Detected broken video BIOS with %d/%dkB of video "
"memory stolen.\n",
prealloc_size / 1024, agp_size / 1024);
DRM_ERROR("Disabling GEM. (try reducing stolen memory or "
"updating the BIOS to fix).\n");
dev_priv->has_gem = 0;
}
dev->driver->get_vblank_counter = i915_get_vblank_counter;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
if (IS_G4X(dev) || IS_IRONLAKE(dev) || IS_GEN6(dev)) {
dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
dev->driver->get_vblank_counter = gm45_get_vblank_counter;
}
/* Try to make sure MCHBAR is enabled before poking at it */
intel_setup_mchbar(dev);
i915_gem_load(dev);
/* Init HWS */
if (!I915_NEED_GFX_HWS(dev)) {
ret = i915_init_phys_hws(dev);
if (ret != 0)
goto out_workqueue_free;
}
i915_get_mem_freq(dev);
/* On the 945G/GM, the chipset reports the MSI capability on the
* integrated graphics even though the support isn't actually there
* according to the published specs. It doesn't appear to function
* correctly in testing on 945G.
* This may be a side effect of MSI having been made available for PEG
* and the registers being closely associated.
*
* According to chipset errata, on the 965GM, MSI interrupts may
* be lost or delayed, but we use them anyways to avoid
* stuck interrupts on some machines.
*/
if (!IS_I945G(dev) && !IS_I945GM(dev))
pci_enable_msi(dev->pdev);
spin_lock_init(&dev_priv->user_irq_lock);
spin_lock_init(&dev_priv->error_lock);
dev_priv->user_irq_refcount = 0;
dev_priv->trace_irq_seqno = 0;
ret = drm_vblank_init(dev, I915_NUM_PIPE);
if (ret) {
(void) i915_driver_unload(dev);
return ret;
}
/* Start out suspended */
dev_priv->mm.suspended = 1;
intel_detect_pch(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
ret = i915_load_modeset_init(dev, prealloc_start,
prealloc_size, agp_size);
if (ret < 0) {
DRM_ERROR("failed to init modeset\n");
goto out_workqueue_free;
}
}
/* Must be done after probing outputs */
intel_opregion_init(dev, 0);
setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
(unsigned long) dev);
return 0;
out_workqueue_free:
destroy_workqueue(dev_priv->wq);
out_iomapfree:
io_mapping_free(dev_priv->mm.gtt_mapping);
out_rmmap:
iounmap(dev_priv->regs);
put_bridge:
pci_dev_put(dev_priv->bridge_dev);
free_priv:
kfree(dev_priv);
return ret;
}
int i915_driver_unload(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
i915_destroy_error_state(dev);
destroy_workqueue(dev_priv->wq);
del_timer_sync(&dev_priv->hangcheck_timer);
io_mapping_free(dev_priv->mm.gtt_mapping);
if (dev_priv->mm.gtt_mtrr >= 0) {
mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base,
dev->agp->agp_info.aper_size * 1024 * 1024);
dev_priv->mm.gtt_mtrr = -1;
}
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
/*
* free the memory space allocated for the child device
* config parsed from VBT
*/
if (dev_priv->child_dev && dev_priv->child_dev_num) {
kfree(dev_priv->child_dev);
dev_priv->child_dev = NULL;
dev_priv->child_dev_num = 0;
}
drm_irq_uninstall(dev);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-31 22:38:10 -07:00
vga_switcheroo_unregister_client(dev->pdev);
vga_client_register(dev->pdev, NULL, NULL, NULL);
}
if (dev->pdev->msi_enabled)
pci_disable_msi(dev->pdev);
if (dev_priv->regs != NULL)
iounmap(dev_priv->regs);
intel_opregion_free(dev, 0);
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_modeset_cleanup(dev);
i915_gem_free_all_phys_object(dev);
mutex_lock(&dev->struct_mutex);
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
drm_mm_takedown(&dev_priv->vram);
i915_gem_lastclose(dev);
intel_cleanup_overlay(dev);
}
intel_teardown_mchbar(dev);
pci_dev_put(dev_priv->bridge_dev);
kfree(dev->dev_private);
return 0;
}
int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv)
{
struct drm_i915_file_private *i915_file_priv;
DRM_DEBUG_DRIVER("\n");
i915_file_priv = (struct drm_i915_file_private *)
kmalloc(sizeof(*i915_file_priv), GFP_KERNEL);
if (!i915_file_priv)
return -ENOMEM;
file_priv->driver_priv = i915_file_priv;
INIT_LIST_HEAD(&i915_file_priv->mm.request_list);
return 0;
}
/**
* i915_driver_lastclose - clean up after all DRM clients have exited
* @dev: DRM device
*
* Take care of cleaning up after all DRM clients have exited. In the
* mode setting case, we want to restore the kernel's initial mode (just
* in case the last client left us in a bad state).
*
* Additionally, in the non-mode setting case, we'll tear down the AGP
* and DMA structures, since the kernel won't be using them, and clea
* up any GEM state.
*/
void i915_driver_lastclose(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
if (!dev_priv || drm_core_check_feature(dev, DRIVER_MODESET)) {
drm_fb_helper_restore();
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-31 22:38:10 -07:00
vga_switcheroo_process_delayed_switch();
return;
}
i915_gem_lastclose(dev);
if (dev_priv->agp_heap)
i915_mem_takedown(&(dev_priv->agp_heap));
i915_dma_cleanup(dev);
}
void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
i915_gem_release(dev, file_priv);
if (!drm_core_check_feature(dev, DRIVER_MODESET))
i915_mem_release(dev, file_priv, dev_priv->agp_heap);
}
void i915_driver_postclose(struct drm_device *dev, struct drm_file *file_priv)
{
struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv;
kfree(i915_file_priv);
}
struct drm_ioctl_desc i915_ioctls[] = {
DRM_IOCTL_DEF(DRM_I915_INIT, i915_dma_init, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_FLUSH, i915_flush_ioctl, DRM_AUTH),
DRM_IOCTL_DEF(DRM_I915_FLIP, i915_flip_bufs, DRM_AUTH),
DRM_IOCTL_DEF(DRM_I915_BATCHBUFFER, i915_batchbuffer, DRM_AUTH),
DRM_IOCTL_DEF(DRM_I915_IRQ_EMIT, i915_irq_emit, DRM_AUTH),
DRM_IOCTL_DEF(DRM_I915_IRQ_WAIT, i915_irq_wait, DRM_AUTH),
DRM_IOCTL_DEF(DRM_I915_GETPARAM, i915_getparam, DRM_AUTH),
DRM_IOCTL_DEF(DRM_I915_SETPARAM, i915_setparam, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_ALLOC, i915_mem_alloc, DRM_AUTH),
DRM_IOCTL_DEF(DRM_I915_FREE, i915_mem_free, DRM_AUTH),
DRM_IOCTL_DEF(DRM_I915_INIT_HEAP, i915_mem_init_heap, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_CMDBUFFER, i915_cmdbuffer, DRM_AUTH),
DRM_IOCTL_DEF(DRM_I915_DESTROY_HEAP, i915_mem_destroy_heap, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY ),
DRM_IOCTL_DEF(DRM_I915_SET_VBLANK_PIPE, i915_vblank_pipe_set, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY ),
DRM_IOCTL_DEF(DRM_I915_GET_VBLANK_PIPE, i915_vblank_pipe_get, DRM_AUTH ),
DRM_IOCTL_DEF(DRM_I915_VBLANK_SWAP, i915_vblank_swap, DRM_AUTH),
DRM_IOCTL_DEF(DRM_I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_GEM_INIT, i915_gem_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH|DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH|DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_ENTERVT, i915_gem_entervt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_LEAVEVT, i915_gem_leavevt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_CREATE, i915_gem_create_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_I915_OVERLAY_ATTRS, intel_overlay_attrs, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
};
int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
/**
* Determine if the device really is AGP or not.
*
* All Intel graphics chipsets are treated as AGP, even if they are really
* PCI-e.
*
* \param dev The device to be tested.
*
* \returns
* A value of 1 is always retured to indictate every i9x5 is AGP.
*/
int i915_driver_device_is_agp(struct drm_device * dev)
{
return 1;
}