2008-01-24 19:47:18 -07:00
|
|
|
/*
|
|
|
|
* MPC8379E RDB Device Tree Source
|
|
|
|
*
|
|
|
|
* Copyright 2007, 2008 Freescale Semiconductor Inc.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
* option) any later version.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/dts-v1/;
|
|
|
|
|
|
|
|
/ {
|
2008-01-28 12:00:37 -07:00
|
|
|
compatible = "fsl,mpc8379rdb";
|
2008-01-24 19:47:18 -07:00
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
|
|
|
aliases {
|
|
|
|
ethernet0 = &enet0;
|
|
|
|
ethernet1 = &enet1;
|
|
|
|
serial0 = &serial0;
|
|
|
|
serial1 = &serial1;
|
|
|
|
pci0 = &pci0;
|
|
|
|
};
|
|
|
|
|
|
|
|
cpus {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
PowerPC,8379@0 {
|
|
|
|
device_type = "cpu";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
reg = <0x0>;
|
2008-01-24 19:47:18 -07:00
|
|
|
d-cache-line-size = <32>;
|
|
|
|
i-cache-line-size = <32>;
|
|
|
|
d-cache-size = <32768>;
|
|
|
|
i-cache-size = <32768>;
|
|
|
|
timebase-frequency = <0>;
|
|
|
|
bus-frequency = <0>;
|
|
|
|
clock-frequency = <0>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
memory {
|
|
|
|
device_type = "memory";
|
|
|
|
reg = <0x00000000 0x10000000>; // 256MB at 0
|
|
|
|
};
|
|
|
|
|
|
|
|
localbus@e0005000 {
|
|
|
|
#address-cells = <2>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
|
|
|
|
reg = <0xe0005000 0x1000>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
interrupts = <77 0x8>;
|
2008-01-24 19:47:18 -07:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
|
|
|
// CS0 and CS1 are swapped when
|
|
|
|
// booting from nand, but the
|
|
|
|
// addresses are the same.
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
ranges = <0x0 0x0 0xfe000000 0x00800000
|
|
|
|
0x1 0x0 0xe0600000 0x00008000
|
|
|
|
0x2 0x0 0xf0000000 0x00020000
|
|
|
|
0x3 0x0 0xfa000000 0x00008000>;
|
2008-01-24 19:47:18 -07:00
|
|
|
|
|
|
|
flash@0,0 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
compatible = "cfi-flash";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
reg = <0x0 0x0 0x800000>;
|
2008-01-24 19:47:18 -07:00
|
|
|
bank-width = <2>;
|
|
|
|
device-width = <1>;
|
|
|
|
};
|
|
|
|
|
|
|
|
nand@1,0 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
compatible = "fsl,mpc8379-fcm-nand",
|
|
|
|
"fsl,elbc-fcm-nand";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
reg = <0x1 0x0 0x8000>;
|
2008-01-24 19:47:18 -07:00
|
|
|
|
|
|
|
u-boot@0 {
|
|
|
|
reg = <0x0 0x100000>;
|
|
|
|
read-only;
|
|
|
|
};
|
|
|
|
|
|
|
|
kernel@100000 {
|
|
|
|
reg = <0x100000 0x300000>;
|
|
|
|
};
|
|
|
|
fs@400000 {
|
|
|
|
reg = <0x400000 0x1c00000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
immr@e0000000 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
device_type = "soc";
|
|
|
|
compatible = "simple-bus";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
ranges = <0x0 0xe0000000 0x00100000>;
|
2008-01-24 19:47:18 -07:00
|
|
|
reg = <0xe0000000 0x00000200>;
|
|
|
|
bus-frequency = <0>;
|
|
|
|
|
|
|
|
wdt@200 {
|
|
|
|
device_type = "watchdog";
|
|
|
|
compatible = "mpc83xx_wdt";
|
|
|
|
reg = <0x200 0x100>;
|
|
|
|
};
|
|
|
|
|
2009-02-02 07:52:39 -07:00
|
|
|
gpio1: gpio-controller@c00 {
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
|
|
|
|
reg = <0xc00 0x100>;
|
|
|
|
interrupts = <74 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
gpio-controller;
|
|
|
|
};
|
|
|
|
|
|
|
|
gpio2: gpio-controller@d00 {
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
|
|
|
|
reg = <0xd00 0x100>;
|
|
|
|
interrupts = <75 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
gpio-controller;
|
|
|
|
};
|
|
|
|
|
2009-03-19 12:01:42 -06:00
|
|
|
sleep-nexus {
|
2008-01-24 19:47:18 -07:00
|
|
|
#address-cells = <1>;
|
2009-03-19 12:01:42 -06:00
|
|
|
#size-cells = <1>;
|
|
|
|
compatible = "simple-bus";
|
|
|
|
sleep = <&pmc 0x0c000000>;
|
|
|
|
ranges;
|
2009-01-28 03:07:44 -07:00
|
|
|
|
2009-03-19 12:01:42 -06:00
|
|
|
i2c@3000 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
cell-index = <0>;
|
|
|
|
compatible = "fsl-i2c";
|
|
|
|
reg = <0x3000 0x100>;
|
|
|
|
interrupts = <14 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
dfsrr;
|
|
|
|
|
|
|
|
dtt@48 {
|
|
|
|
compatible = "national,lm75";
|
|
|
|
reg = <0x48>;
|
|
|
|
};
|
|
|
|
|
|
|
|
at24@50 {
|
|
|
|
compatible = "at24,24c256";
|
|
|
|
reg = <0x50>;
|
|
|
|
};
|
|
|
|
|
|
|
|
rtc@68 {
|
|
|
|
compatible = "dallas,ds1339";
|
|
|
|
reg = <0x68>;
|
|
|
|
};
|
|
|
|
|
|
|
|
mcu_pio: mcu@a {
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
compatible = "fsl,mc9s08qg8-mpc8379erdb",
|
|
|
|
"fsl,mcu-mpc8349emitx";
|
|
|
|
reg = <0x0a>;
|
|
|
|
gpio-controller;
|
|
|
|
};
|
2008-01-24 19:47:18 -07:00
|
|
|
};
|
2008-10-17 12:57:09 -06:00
|
|
|
|
2009-03-19 12:01:42 -06:00
|
|
|
sdhci@2e000 {
|
2009-06-10 09:19:26 -06:00
|
|
|
compatible = "fsl,mpc8379-esdhc", "fsl,esdhc";
|
2009-03-19 12:01:42 -06:00
|
|
|
reg = <0x2e000 0x1000>;
|
|
|
|
interrupts = <42 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2009-09-22 17:45:14 -06:00
|
|
|
sdhci,wp-inverted;
|
2009-03-19 12:01:42 -06:00
|
|
|
/* Filled in by U-Boot */
|
2009-07-24 15:42:30 -06:00
|
|
|
clock-frequency = <111111111>;
|
2008-10-17 12:57:09 -06:00
|
|
|
};
|
2008-01-24 19:47:18 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
i2c@3100 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
cell-index = <1>;
|
|
|
|
compatible = "fsl-i2c";
|
|
|
|
reg = <0x3100 0x100>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
interrupts = <15 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2008-01-24 19:47:18 -07:00
|
|
|
dfsrr;
|
|
|
|
};
|
|
|
|
|
|
|
|
spi@7000 {
|
|
|
|
cell-index = <0>;
|
|
|
|
compatible = "fsl,spi";
|
|
|
|
reg = <0x7000 0x1000>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
interrupts = <16 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2008-01-24 19:47:18 -07:00
|
|
|
mode = "cpu";
|
|
|
|
};
|
|
|
|
|
2008-06-27 12:45:19 -06:00
|
|
|
dma@82a8 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
|
|
|
|
reg = <0x82a8 4>;
|
|
|
|
ranges = <0 0x8100 0x1a8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <71 8>;
|
|
|
|
cell-index = <0>;
|
|
|
|
dma-channel@0 {
|
|
|
|
compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
reg = <0 0x80>;
|
2008-09-23 21:05:10 -06:00
|
|
|
cell-index = <0>;
|
2008-06-27 12:45:19 -06:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <71 8>;
|
|
|
|
};
|
|
|
|
dma-channel@80 {
|
|
|
|
compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
reg = <0x80 0x80>;
|
2008-09-23 21:05:10 -06:00
|
|
|
cell-index = <1>;
|
2008-06-27 12:45:19 -06:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <71 8>;
|
|
|
|
};
|
|
|
|
dma-channel@100 {
|
|
|
|
compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
reg = <0x100 0x80>;
|
2008-09-23 21:05:10 -06:00
|
|
|
cell-index = <2>;
|
2008-06-27 12:45:19 -06:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <71 8>;
|
|
|
|
};
|
|
|
|
dma-channel@180 {
|
|
|
|
compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
reg = <0x180 0x28>;
|
2008-09-23 21:05:10 -06:00
|
|
|
cell-index = <3>;
|
2008-06-27 12:45:19 -06:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <71 8>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2008-01-24 19:47:18 -07:00
|
|
|
usb@23000 {
|
|
|
|
compatible = "fsl-usb2-dr";
|
|
|
|
reg = <0x23000 0x1000>;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <38 0x8>;
|
2008-03-12 14:02:13 -06:00
|
|
|
phy_type = "ulpi";
|
2009-03-19 12:01:42 -06:00
|
|
|
sleep = <&pmc 0x00c00000>;
|
2008-01-24 19:47:18 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
enet0: ethernet@24000 {
|
2009-03-19 12:01:45 -06:00
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
2008-01-24 19:47:18 -07:00
|
|
|
cell-index = <0>;
|
|
|
|
device_type = "network";
|
|
|
|
model = "eTSEC";
|
|
|
|
compatible = "gianfar";
|
|
|
|
reg = <0x24000 0x1000>;
|
2009-03-19 12:01:45 -06:00
|
|
|
ranges = <0x0 0x24000 0x1000>;
|
2008-01-24 19:47:18 -07:00
|
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
interrupts = <32 0x8 33 0x8 34 0x8>;
|
2008-01-24 19:47:18 -07:00
|
|
|
phy-connection-type = "mii";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
interrupt-parent = <&ipic>;
|
2008-12-16 16:29:15 -07:00
|
|
|
tbi-handle = <&tbi0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
phy-handle = <&phy2>;
|
2009-03-19 12:01:42 -06:00
|
|
|
sleep = <&pmc 0xc0000000>;
|
|
|
|
fsl,magic-packet;
|
2009-03-19 12:01:45 -06:00
|
|
|
|
|
|
|
mdio@520 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
compatible = "fsl,gianfar-mdio";
|
|
|
|
reg = <0x520 0x20>;
|
|
|
|
|
|
|
|
phy2: ethernet-phy@2 {
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <17 0x8>;
|
|
|
|
reg = <0x2>;
|
|
|
|
};
|
|
|
|
|
|
|
|
tbi0: tbi-phy@11 {
|
|
|
|
reg = <0x11>;
|
|
|
|
device_type = "tbi-phy";
|
|
|
|
};
|
|
|
|
};
|
2008-01-24 19:47:18 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
enet1: ethernet@25000 {
|
2009-03-19 12:01:45 -06:00
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
2008-01-24 19:47:18 -07:00
|
|
|
cell-index = <1>;
|
|
|
|
device_type = "network";
|
|
|
|
model = "eTSEC";
|
|
|
|
compatible = "gianfar";
|
|
|
|
reg = <0x25000 0x1000>;
|
2009-03-19 12:01:45 -06:00
|
|
|
ranges = <0x0 0x25000 0x1000>;
|
2008-01-24 19:47:18 -07:00
|
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
interrupts = <35 0x8 36 0x8 37 0x8>;
|
2008-01-24 19:47:18 -07:00
|
|
|
phy-connection-type = "mii";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
interrupt-parent = <&ipic>;
|
2008-03-17 11:52:08 -06:00
|
|
|
fixed-link = <1 1 1000 0 0>;
|
2008-12-16 16:29:15 -07:00
|
|
|
tbi-handle = <&tbi1>;
|
2009-03-19 12:01:42 -06:00
|
|
|
sleep = <&pmc 0x30000000>;
|
|
|
|
fsl,magic-packet;
|
2009-03-19 12:01:45 -06:00
|
|
|
|
|
|
|
mdio@520 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
compatible = "fsl,gianfar-tbi";
|
|
|
|
reg = <0x520 0x20>;
|
|
|
|
|
|
|
|
tbi1: tbi-phy@11 {
|
|
|
|
reg = <0x11>;
|
|
|
|
device_type = "tbi-phy";
|
|
|
|
};
|
|
|
|
};
|
2008-01-24 19:47:18 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
serial0: serial@4500 {
|
|
|
|
cell-index = <0>;
|
|
|
|
device_type = "serial";
|
2011-11-28 12:58:53 -07:00
|
|
|
compatible = "fsl,ns16550", "ns16550";
|
2008-01-24 19:47:18 -07:00
|
|
|
reg = <0x4500 0x100>;
|
|
|
|
clock-frequency = <0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
interrupts = <9 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2008-01-24 19:47:18 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
serial1: serial@4600 {
|
|
|
|
cell-index = <1>;
|
|
|
|
device_type = "serial";
|
2011-11-28 12:58:53 -07:00
|
|
|
compatible = "fsl,ns16550", "ns16550";
|
2008-01-24 19:47:18 -07:00
|
|
|
reg = <0x4600 0x100>;
|
|
|
|
clock-frequency = <0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
interrupts = <10 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2008-01-24 19:47:18 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
crypto@30000 {
|
2008-07-08 18:13:33 -06:00
|
|
|
compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
|
|
|
|
"fsl,sec2.1", "fsl,sec2.0";
|
2008-01-24 19:47:18 -07:00
|
|
|
reg = <0x30000 0x10000>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
interrupts = <11 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2008-07-08 18:13:33 -06:00
|
|
|
fsl,num-channels = <4>;
|
|
|
|
fsl,channel-fifo-len = <24>;
|
|
|
|
fsl,exec-units-mask = <0x9fe>;
|
|
|
|
fsl,descriptor-types-mask = <0x3ab0ebf>;
|
2009-03-19 12:01:42 -06:00
|
|
|
sleep = <&pmc 0x03000000>;
|
2009-02-05 12:04:59 -07:00
|
|
|
};
|
|
|
|
|
2008-01-24 19:47:18 -07:00
|
|
|
sata@18000 {
|
|
|
|
compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
|
|
|
|
reg = <0x18000 0x1000>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
interrupts = <44 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2009-03-19 12:01:42 -06:00
|
|
|
sleep = <&pmc 0x000000c0>;
|
2008-01-24 19:47:18 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
sata@19000 {
|
|
|
|
compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
|
|
|
|
reg = <0x19000 0x1000>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
interrupts = <45 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2009-03-19 12:01:42 -06:00
|
|
|
sleep = <&pmc 0x00000030>;
|
2008-01-24 19:47:18 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
sata@1a000 {
|
|
|
|
compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
|
|
|
|
reg = <0x1a000 0x1000>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
interrupts = <46 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2009-03-19 12:01:42 -06:00
|
|
|
sleep = <&pmc 0x0000000c>;
|
2008-01-24 19:47:18 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
sata@1b000 {
|
|
|
|
compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
|
|
|
|
reg = <0x1b000 0x1000>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
interrupts = <47 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
2009-03-19 12:01:42 -06:00
|
|
|
sleep = <&pmc 0x00000003>;
|
2008-01-24 19:47:18 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
/* IPIC
|
|
|
|
* interrupts cell = <intr #, sense>
|
|
|
|
* sense values match linux IORESOURCE_IRQ_* defines:
|
|
|
|
* sense == 8: Level, low assertion
|
|
|
|
* sense == 2: Edge, high-to-low change
|
|
|
|
*/
|
|
|
|
ipic: interrupt-controller@700 {
|
|
|
|
compatible = "fsl,ipic";
|
|
|
|
interrupt-controller;
|
|
|
|
#address-cells = <0>;
|
|
|
|
#interrupt-cells = <2>;
|
|
|
|
reg = <0x700 0x100>;
|
|
|
|
};
|
2009-03-19 12:01:42 -06:00
|
|
|
|
|
|
|
pmc: power@b00 {
|
|
|
|
compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
|
|
|
|
reg = <0xb00 0x100 0xa00 0x100>;
|
|
|
|
interrupts = <80 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
};
|
2008-01-24 19:47:18 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
pci0: pci@e0008500 {
|
|
|
|
interrupt-map-mask = <0xf800 0 0 7>;
|
|
|
|
interrupt-map = <
|
|
|
|
/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
|
|
|
|
|
|
|
|
/* IDSEL AD14 IRQ6 inta */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
0x7000 0x0 0x0 0x1 &ipic 22 0x8
|
2008-01-24 19:47:18 -07:00
|
|
|
|
|
|
|
/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
0x7800 0x0 0x0 0x1 &ipic 21 0x8
|
|
|
|
0x7800 0x0 0x0 0x2 &ipic 22 0x8
|
|
|
|
0x7800 0x0 0x0 0x4 &ipic 23 0x8
|
2008-01-24 19:47:18 -07:00
|
|
|
|
|
|
|
/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 14:09:36 -07:00
|
|
|
0xE000 0x0 0x0 0x1 &ipic 23 0x8
|
|
|
|
0xE000 0x0 0x0 0x2 &ipic 21 0x8
|
|
|
|
0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
interrupts = <66 0x8>;
|
|
|
|
bus-range = <0x0 0x0>;
|
|
|
|
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
|
|
|
|
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
2009-07-20 15:36:43 -06:00
|
|
|
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
|
2009-03-19 12:01:42 -06:00
|
|
|
sleep = <&pmc 0x00010000>;
|
2008-01-24 19:47:18 -07:00
|
|
|
clock-frequency = <66666666>;
|
|
|
|
#interrupt-cells = <1>;
|
|
|
|
#size-cells = <2>;
|
|
|
|
#address-cells = <3>;
|
2008-10-07 13:00:18 -06:00
|
|
|
reg = <0xe0008500 0x100 /* internal registers */
|
|
|
|
0xe0008300 0x8>; /* config space access registers */
|
2008-01-24 19:47:18 -07:00
|
|
|
compatible = "fsl,mpc8349-pci";
|
|
|
|
device_type = "pci";
|
|
|
|
};
|
2010-05-02 11:27:05 -06:00
|
|
|
|
|
|
|
leds {
|
|
|
|
compatible = "gpio-leds";
|
|
|
|
|
|
|
|
pwr {
|
|
|
|
gpios = <&mcu_pio 0 0>;
|
|
|
|
default-state = "on";
|
|
|
|
};
|
|
|
|
|
|
|
|
hdd {
|
|
|
|
gpios = <&mcu_pio 1 0>;
|
|
|
|
linux,default-trigger = "ide-disk";
|
|
|
|
};
|
|
|
|
};
|
2008-01-24 19:47:18 -07:00
|
|
|
};
|