1
0
Fork 0
alistair23-linux/drivers/net/ethernet/renesas/sh_eth.c

3572 lines
86 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/* SuperH Ethernet device driver
*
* Copyright (C) 2014 Renesas Electronics Corporation
* Copyright (C) 2006-2012 Nobuhiro Iwamatsu
* Copyright (C) 2008-2014 Renesas Solutions Corp.
* Copyright (C) 2013-2017 Cogent Embedded, Inc.
* Copyright (C) 2014 Codethink Limited
*/
net: sh_eth: fix build failure The following commit removed some including headers: "net: sh_eth: move the asm/sh_eth.h to include/linux/" (commit id: d4fa0e35fdbd54acf791fa3793d6d17f7795f7ae) Then, the build failure happened on the linux-next: drivers/net/ethernet/renesas/sh_eth.c:601: error: 'THIS_MODULE' undeclared here (not in a function) drivers/net/ethernet/renesas/sh_eth.c:1970: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/renesas/sh_eth.c:1970: warning: data definition has no type or storage class drivers/net/ethernet/renesas/sh_eth.c:1970: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/net/ethernet/renesas/sh_eth.c:1970: warning: function declaration isn't a prototype drivers/net/ethernet/renesas/sh_eth.c:1971: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/renesas/sh_eth.c:1971: warning: data definition has no type or storage class drivers/net/ethernet/renesas/sh_eth.c:1971: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/net/ethernet/renesas/sh_eth.c:1971: warning: function declaration isn't a prototype drivers/net/ethernet/renesas/sh_eth.c:1972: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/renesas/sh_eth.c:1972: warning: data definition has no type or storage class drivers/net/ethernet/renesas/sh_eth.c:1972: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/net/ethernet/renesas/sh_eth.c:1972: warning: function declaration isn't a prototype This patch fixes the issue. This patch also get back include/kernel.h and linux/spinlock.h. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29 11:16:57 -06:00
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/mdio-bitbang.h>
#include <linux/netdevice.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_net.h>
#include <linux/phy.h>
#include <linux/cache.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
#include <linux/slab.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#include <linux/sh_eth.h>
#include <linux/of_mdio.h>
#include "sh_eth.h"
#define SH_ETH_DEF_MSG_ENABLE \
(NETIF_MSG_LINK | \
NETIF_MSG_TIMER | \
NETIF_MSG_RX_ERR| \
NETIF_MSG_TX_ERR)
#define SH_ETH_OFFSET_INVALID ((u16)~0)
#define SH_ETH_OFFSET_DEFAULTS \
[0 ... SH_ETH_MAX_REGISTER_OFFSET - 1] = SH_ETH_OFFSET_INVALID
static const u16 sh_eth_offset_gigabit[SH_ETH_MAX_REGISTER_OFFSET] = {
SH_ETH_OFFSET_DEFAULTS,
[EDSR] = 0x0000,
[EDMR] = 0x0400,
[EDTRR] = 0x0408,
[EDRRR] = 0x0410,
[EESR] = 0x0428,
[EESIPR] = 0x0430,
[TDLAR] = 0x0010,
[TDFAR] = 0x0014,
[TDFXR] = 0x0018,
[TDFFR] = 0x001c,
[RDLAR] = 0x0030,
[RDFAR] = 0x0034,
[RDFXR] = 0x0038,
[RDFFR] = 0x003c,
[TRSCER] = 0x0438,
[RMFCR] = 0x0440,
[TFTR] = 0x0448,
[FDR] = 0x0450,
[RMCR] = 0x0458,
[RPADIR] = 0x0460,
[FCFTR] = 0x0468,
[CSMR] = 0x04E4,
[ECMR] = 0x0500,
[ECSR] = 0x0510,
[ECSIPR] = 0x0518,
[PIR] = 0x0520,
[PSR] = 0x0528,
[PIPR] = 0x052c,
[RFLR] = 0x0508,
[APR] = 0x0554,
[MPR] = 0x0558,
[PFTCR] = 0x055c,
[PFRCR] = 0x0560,
[TPAUSER] = 0x0564,
[GECMR] = 0x05b0,
[BCULR] = 0x05b4,
[MAHR] = 0x05c0,
[MALR] = 0x05c8,
[TROCR] = 0x0700,
[CDCR] = 0x0708,
[LCCR] = 0x0710,
[CEFCR] = 0x0740,
[FRECR] = 0x0748,
[TSFRCR] = 0x0750,
[TLFRCR] = 0x0758,
[RFCR] = 0x0760,
[CERCR] = 0x0768,
[CEECR] = 0x0770,
[MAFCR] = 0x0778,
[RMII_MII] = 0x0790,
[ARSTR] = 0x0000,
[TSU_CTRST] = 0x0004,
[TSU_FWEN0] = 0x0010,
[TSU_FWEN1] = 0x0014,
[TSU_FCM] = 0x0018,
[TSU_BSYSL0] = 0x0020,
[TSU_BSYSL1] = 0x0024,
[TSU_PRISL0] = 0x0028,
[TSU_PRISL1] = 0x002c,
[TSU_FWSL0] = 0x0030,
[TSU_FWSL1] = 0x0034,
[TSU_FWSLC] = 0x0038,
[TSU_QTAGM0] = 0x0040,
[TSU_QTAGM1] = 0x0044,
[TSU_FWSR] = 0x0050,
[TSU_FWINMK] = 0x0054,
[TSU_ADQT0] = 0x0048,
[TSU_ADQT1] = 0x004c,
[TSU_VTAG0] = 0x0058,
[TSU_VTAG1] = 0x005c,
[TSU_ADSBSY] = 0x0060,
[TSU_TEN] = 0x0064,
[TSU_POST1] = 0x0070,
[TSU_POST2] = 0x0074,
[TSU_POST3] = 0x0078,
[TSU_POST4] = 0x007c,
[TSU_ADRH0] = 0x0100,
[TXNLCR0] = 0x0080,
[TXALCR0] = 0x0084,
[RXNLCR0] = 0x0088,
[RXALCR0] = 0x008c,
[FWNLCR0] = 0x0090,
[FWALCR0] = 0x0094,
[TXNLCR1] = 0x00a0,
[TXALCR1] = 0x00a4,
[RXNLCR1] = 0x00a8,
[RXALCR1] = 0x00ac,
[FWNLCR1] = 0x00b0,
[FWALCR1] = 0x00b4,
};
static const u16 sh_eth_offset_fast_rz[SH_ETH_MAX_REGISTER_OFFSET] = {
SH_ETH_OFFSET_DEFAULTS,
[EDSR] = 0x0000,
[EDMR] = 0x0400,
[EDTRR] = 0x0408,
[EDRRR] = 0x0410,
[EESR] = 0x0428,
[EESIPR] = 0x0430,
[TDLAR] = 0x0010,
[TDFAR] = 0x0014,
[TDFXR] = 0x0018,
[TDFFR] = 0x001c,
[RDLAR] = 0x0030,
[RDFAR] = 0x0034,
[RDFXR] = 0x0038,
[RDFFR] = 0x003c,
[TRSCER] = 0x0438,
[RMFCR] = 0x0440,
[TFTR] = 0x0448,
[FDR] = 0x0450,
[RMCR] = 0x0458,
[RPADIR] = 0x0460,
[FCFTR] = 0x0468,
[CSMR] = 0x04E4,
[ECMR] = 0x0500,
[RFLR] = 0x0508,
[ECSR] = 0x0510,
[ECSIPR] = 0x0518,
[PIR] = 0x0520,
[APR] = 0x0554,
[MPR] = 0x0558,
[PFTCR] = 0x055c,
[PFRCR] = 0x0560,
[TPAUSER] = 0x0564,
[MAHR] = 0x05c0,
[MALR] = 0x05c8,
[CEFCR] = 0x0740,
[FRECR] = 0x0748,
[TSFRCR] = 0x0750,
[TLFRCR] = 0x0758,
[RFCR] = 0x0760,
[MAFCR] = 0x0778,
[ARSTR] = 0x0000,
[TSU_CTRST] = 0x0004,
[TSU_FWSLC] = 0x0038,
[TSU_VTAG0] = 0x0058,
[TSU_ADSBSY] = 0x0060,
[TSU_TEN] = 0x0064,
[TSU_POST1] = 0x0070,
[TSU_POST2] = 0x0074,
[TSU_POST3] = 0x0078,
[TSU_POST4] = 0x007c,
[TSU_ADRH0] = 0x0100,
[TXNLCR0] = 0x0080,
[TXALCR0] = 0x0084,
[RXNLCR0] = 0x0088,
[RXALCR0] = 0x008C,
};
static const u16 sh_eth_offset_fast_rcar[SH_ETH_MAX_REGISTER_OFFSET] = {
SH_ETH_OFFSET_DEFAULTS,
[ECMR] = 0x0300,
[RFLR] = 0x0308,
[ECSR] = 0x0310,
[ECSIPR] = 0x0318,
[PIR] = 0x0320,
[PSR] = 0x0328,
[RDMLR] = 0x0340,
[IPGR] = 0x0350,
[APR] = 0x0354,
[MPR] = 0x0358,
[RFCF] = 0x0360,
[TPAUSER] = 0x0364,
[TPAUSECR] = 0x0368,
[MAHR] = 0x03c0,
[MALR] = 0x03c8,
[TROCR] = 0x03d0,
[CDCR] = 0x03d4,
[LCCR] = 0x03d8,
[CNDCR] = 0x03dc,
[CEFCR] = 0x03e4,
[FRECR] = 0x03e8,
[TSFRCR] = 0x03ec,
[TLFRCR] = 0x03f0,
[RFCR] = 0x03f4,
[MAFCR] = 0x03f8,
[EDMR] = 0x0200,
[EDTRR] = 0x0208,
[EDRRR] = 0x0210,
[TDLAR] = 0x0218,
[RDLAR] = 0x0220,
[EESR] = 0x0228,
[EESIPR] = 0x0230,
[TRSCER] = 0x0238,
[RMFCR] = 0x0240,
[TFTR] = 0x0248,
[FDR] = 0x0250,
[RMCR] = 0x0258,
[TFUCR] = 0x0264,
[RFOCR] = 0x0268,
[RMIIMODE] = 0x026c,
[FCFTR] = 0x0270,
[TRIMD] = 0x027c,
};
static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = {
SH_ETH_OFFSET_DEFAULTS,
[ECMR] = 0x0100,
[RFLR] = 0x0108,
[ECSR] = 0x0110,
[ECSIPR] = 0x0118,
[PIR] = 0x0120,
[PSR] = 0x0128,
[RDMLR] = 0x0140,
[IPGR] = 0x0150,
[APR] = 0x0154,
[MPR] = 0x0158,
[TPAUSER] = 0x0164,
[RFCF] = 0x0160,
[TPAUSECR] = 0x0168,
[BCFRR] = 0x016c,
[MAHR] = 0x01c0,
[MALR] = 0x01c8,
[TROCR] = 0x01d0,
[CDCR] = 0x01d4,
[LCCR] = 0x01d8,
[CNDCR] = 0x01dc,
[CEFCR] = 0x01e4,
[FRECR] = 0x01e8,
[TSFRCR] = 0x01ec,
[TLFRCR] = 0x01f0,
[RFCR] = 0x01f4,
[MAFCR] = 0x01f8,
[RTRATE] = 0x01fc,
[EDMR] = 0x0000,
[EDTRR] = 0x0008,
[EDRRR] = 0x0010,
[TDLAR] = 0x0018,
[RDLAR] = 0x0020,
[EESR] = 0x0028,
[EESIPR] = 0x0030,
[TRSCER] = 0x0038,
[RMFCR] = 0x0040,
[TFTR] = 0x0048,
[FDR] = 0x0050,
[RMCR] = 0x0058,
[TFUCR] = 0x0064,
[RFOCR] = 0x0068,
[FCFTR] = 0x0070,
[RPADIR] = 0x0078,
[TRIMD] = 0x007c,
[RBWAR] = 0x00c8,
[RDFAR] = 0x00cc,
[TBRAR] = 0x00d4,
[TDFAR] = 0x00d8,
};
static const u16 sh_eth_offset_fast_sh3_sh2[SH_ETH_MAX_REGISTER_OFFSET] = {
SH_ETH_OFFSET_DEFAULTS,
[EDMR] = 0x0000,
[EDTRR] = 0x0004,
[EDRRR] = 0x0008,
[TDLAR] = 0x000c,
[RDLAR] = 0x0010,
[EESR] = 0x0014,
[EESIPR] = 0x0018,
[TRSCER] = 0x001c,
[RMFCR] = 0x0020,
[TFTR] = 0x0024,
[FDR] = 0x0028,
[RMCR] = 0x002c,
[EDOCR] = 0x0030,
[FCFTR] = 0x0034,
[RPADIR] = 0x0038,
[TRIMD] = 0x003c,
[RBWAR] = 0x0040,
[RDFAR] = 0x0044,
[TBRAR] = 0x004c,
[TDFAR] = 0x0050,
[ECMR] = 0x0160,
[ECSR] = 0x0164,
[ECSIPR] = 0x0168,
[PIR] = 0x016c,
[MAHR] = 0x0170,
[MALR] = 0x0174,
[RFLR] = 0x0178,
[PSR] = 0x017c,
[TROCR] = 0x0180,
[CDCR] = 0x0184,
[LCCR] = 0x0188,
[CNDCR] = 0x018c,
[CEFCR] = 0x0194,
[FRECR] = 0x0198,
[TSFRCR] = 0x019c,
[TLFRCR] = 0x01a0,
[RFCR] = 0x01a4,
[MAFCR] = 0x01a8,
[IPGR] = 0x01b4,
[APR] = 0x01b8,
[MPR] = 0x01bc,
[TPAUSER] = 0x01c4,
[BCFR] = 0x01cc,
[ARSTR] = 0x0000,
[TSU_CTRST] = 0x0004,
[TSU_FWEN0] = 0x0010,
[TSU_FWEN1] = 0x0014,
[TSU_FCM] = 0x0018,
[TSU_BSYSL0] = 0x0020,
[TSU_BSYSL1] = 0x0024,
[TSU_PRISL0] = 0x0028,
[TSU_PRISL1] = 0x002c,
[TSU_FWSL0] = 0x0030,
[TSU_FWSL1] = 0x0034,
[TSU_FWSLC] = 0x0038,
[TSU_QTAGM0] = 0x0040,
[TSU_QTAGM1] = 0x0044,
[TSU_ADQT0] = 0x0048,
[TSU_ADQT1] = 0x004c,
[TSU_FWSR] = 0x0050,
[TSU_FWINMK] = 0x0054,
[TSU_ADSBSY] = 0x0060,
[TSU_TEN] = 0x0064,
[TSU_POST1] = 0x0070,
[TSU_POST2] = 0x0074,
[TSU_POST3] = 0x0078,
[TSU_POST4] = 0x007c,
[TXNLCR0] = 0x0080,
[TXALCR0] = 0x0084,
[RXNLCR0] = 0x0088,
[RXALCR0] = 0x008c,
[FWNLCR0] = 0x0090,
[FWALCR0] = 0x0094,
[TXNLCR1] = 0x00a0,
[TXALCR1] = 0x00a4,
[RXNLCR1] = 0x00a8,
[RXALCR1] = 0x00ac,
[FWNLCR1] = 0x00b0,
[FWALCR1] = 0x00b4,
[TSU_ADRH0] = 0x0100,
};
sh_eth: Ensure DMA engines are stopped before freeing buffers Currently we try to clear EDRRR and EDTRR and immediately continue to free buffers. This is unsafe because: - In general, register writes are not serialised with DMA, so we still have to wait for DMA to complete somehow - The R8A7790 (R-Car H2) manual states that the TX running flag cannot be cleared by writing to EDTRR - The same manual states that clearing the RX running flag only stops RX DMA at the next packet boundary I applied this patch to the driver to detect DMA writes to freed buffers: > --- a/drivers/net/ethernet/renesas/sh_eth.c > +++ b/drivers/net/ethernet/renesas/sh_eth.c > @@ -1098,7 +1098,14 @@ static void sh_eth_ring_free(struct net_device *ndev) > /* Free Rx skb ringbuffer */ > if (mdp->rx_skbuff) { > for (i = 0; i < mdp->num_rx_ring; i++) > + memcpy(mdp->rx_skbuff[i]->data, > + "Hello, world", 12); > + msleep(100); > + for (i = 0; i < mdp->num_rx_ring; i++) { > + WARN_ON(memcmp(mdp->rx_skbuff[i]->data, > + "Hello, world", 12)); > dev_kfree_skb(mdp->rx_skbuff[i]); > + } > } > kfree(mdp->rx_skbuff); > mdp->rx_skbuff = NULL; then ran the loop: while ethtool -G eth0 rx 128 ; ethtool -G eth0 rx 64; do echo -n .; done and 'ping -f' toward the sh_eth port from another machine. The warning fired several times a minute. To fix these issues: - Deactivate all TX descriptors rather than writing to EDTRR - As there seems to be no way of telling when RX DMA is stopped, perform a soft reset to ensure that both DMA enginess are stopped - To reduce the possibility of the reset truncating a transmitted frame, disable egress and wait a reasonable time to reach a packet boundary before resetting - Update statistics before resetting (The 'reasonable time' does not allow for CS/CD in half-duplex mode, but half-duplex no longer seems reasonable!) Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 17:49:32 -07:00
static void sh_eth_rcv_snd_disable(struct net_device *ndev);
static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev);
static void sh_eth_write(struct net_device *ndev, u32 data, int enum_index)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
u16 offset = mdp->reg_offset[enum_index];
if (WARN_ON(offset == SH_ETH_OFFSET_INVALID))
return;
iowrite32(data, mdp->addr + offset);
}
static u32 sh_eth_read(struct net_device *ndev, int enum_index)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
u16 offset = mdp->reg_offset[enum_index];
if (WARN_ON(offset == SH_ETH_OFFSET_INVALID))
return ~0U;
return ioread32(mdp->addr + offset);
}
static void sh_eth_modify(struct net_device *ndev, int enum_index, u32 clear,
u32 set)
{
sh_eth_write(ndev, (sh_eth_read(ndev, enum_index) & ~clear) | set,
enum_index);
}
static u16 sh_eth_tsu_get_offset(struct sh_eth_private *mdp, int enum_index)
{
return mdp->reg_offset[enum_index];
}
static void sh_eth_tsu_write(struct sh_eth_private *mdp, u32 data,
int enum_index)
{
u16 offset = sh_eth_tsu_get_offset(mdp, enum_index);
if (WARN_ON(offset == SH_ETH_OFFSET_INVALID))
return;
iowrite32(data, mdp->tsu_addr + offset);
}
static u32 sh_eth_tsu_read(struct sh_eth_private *mdp, int enum_index)
{
u16 offset = sh_eth_tsu_get_offset(mdp, enum_index);
if (WARN_ON(offset == SH_ETH_OFFSET_INVALID))
return ~0U;
return ioread32(mdp->tsu_addr + offset);
}
static void sh_eth_soft_swap(char *src, int len)
{
#ifdef __LITTLE_ENDIAN
u32 *p = (u32 *)src;
u32 *maxp = p + DIV_ROUND_UP(len, sizeof(u32));
for (; p < maxp; p++)
*p = swab32(*p);
#endif
}
static void sh_eth_select_mii(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
u32 value;
switch (mdp->phy_interface) {
case PHY_INTERFACE_MODE_RGMII ... PHY_INTERFACE_MODE_RGMII_TXID:
value = 0x3;
break;
case PHY_INTERFACE_MODE_GMII:
value = 0x2;
break;
case PHY_INTERFACE_MODE_MII:
value = 0x1;
break;
case PHY_INTERFACE_MODE_RMII:
value = 0x0;
break;
default:
netdev_warn(ndev,
"PHY interface mode was not setup. Set to MII.\n");
value = 0x1;
break;
}
sh_eth_write(ndev, value, RMII_MII);
}
static void sh_eth_set_duplex(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
sh_eth_modify(ndev, ECMR, ECMR_DM, mdp->duplex ? ECMR_DM : 0);
}
static void sh_eth_chip_reset(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
/* reset device */
sh_eth_tsu_write(mdp, ARSTR_ARST, ARSTR);
mdelay(1);
}
static int sh_eth_soft_reset(struct net_device *ndev)
{
sh_eth_modify(ndev, EDMR, EDMR_SRST_ETHER, EDMR_SRST_ETHER);
mdelay(3);
sh_eth_modify(ndev, EDMR, EDMR_SRST_ETHER, 0);
return 0;
}
static int sh_eth_check_soft_reset(struct net_device *ndev)
{
int cnt;
for (cnt = 100; cnt > 0; cnt--) {
if (!(sh_eth_read(ndev, EDMR) & EDMR_SRST_GETHER))
return 0;
mdelay(1);
}
netdev_err(ndev, "Device reset failed\n");
return -ETIMEDOUT;
}
static int sh_eth_soft_reset_gether(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int ret;
sh_eth_write(ndev, EDSR_ENALL, EDSR);
sh_eth_modify(ndev, EDMR, EDMR_SRST_GETHER, EDMR_SRST_GETHER);
ret = sh_eth_check_soft_reset(ndev);
if (ret)
return ret;
/* Table Init */
sh_eth_write(ndev, 0, TDLAR);
sh_eth_write(ndev, 0, TDFAR);
sh_eth_write(ndev, 0, TDFXR);
sh_eth_write(ndev, 0, TDFFR);
sh_eth_write(ndev, 0, RDLAR);
sh_eth_write(ndev, 0, RDFAR);
sh_eth_write(ndev, 0, RDFXR);
sh_eth_write(ndev, 0, RDFFR);
/* Reset HW CRC register */
if (mdp->cd->csmr)
sh_eth_write(ndev, 0, CSMR);
/* Select MII mode */
if (mdp->cd->select_mii)
sh_eth_select_mii(ndev);
return ret;
}
static void sh_eth_set_rate_gether(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
switch (mdp->speed) {
case 10: /* 10BASE */
sh_eth_write(ndev, GECMR_10, GECMR);
break;
case 100:/* 100BASE */
sh_eth_write(ndev, GECMR_100, GECMR);
break;
case 1000: /* 1000BASE */
sh_eth_write(ndev, GECMR_1000, GECMR);
break;
}
}
#ifdef CONFIG_OF
/* R7S72100 */
static struct sh_eth_cpu_data r7s72100_data = {
.soft_reset = sh_eth_soft_reset_gether,
.chip_reset = sh_eth_chip_reset,
.set_duplex = sh_eth_set_duplex,
.register_type = SH_ETH_REG_FAST_RZ,
.edtrr_trns = EDTRR_TRNS_GETHER,
.ecsr_value = ECSR_ICD,
.ecsipr_value = ECSIPR_ICDIP,
.eesipr_value = EESIPR_TWB1IP | EESIPR_TWBIP | EESIPR_TC1IP |
EESIPR_TABTIP | EESIPR_RABTIP | EESIPR_RFCOFIP |
EESIPR_ECIIP |
EESIPR_FTCIP | EESIPR_TDEIP | EESIPR_TFUFIP |
EESIPR_FRIP | EESIPR_RDEIP | EESIPR_RFOFIP |
EESIPR_RMAFIP | EESIPR_RRFIP |
EESIPR_RTLFIP | EESIPR_RTSFIP |
EESIPR_PREIP | EESIPR_CERFIP,
.tx_check = EESR_TC1 | EESR_FTC,
.eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT |
EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE |
EESR_TDE,
.fdr_value = 0x0000070f,
.no_psr = 1,
.apr = 1,
.mpr = 1,
.tpauser = 1,
.hw_swap = 1,
.rpadir = 1,
.no_trimd = 1,
.no_ade = 1,
.xdfar_rw = 1,
.csmr = 1,
.rx_csum = 1,
.tsu = 1,
.no_tx_cntrs = 1,
};
static void sh_eth_chip_reset_r8a7740(struct net_device *ndev)
{
sh_eth_chip_reset(ndev);
sh_eth_select_mii(ndev);
}
/* R8A7740 */
static struct sh_eth_cpu_data r8a7740_data = {
.soft_reset = sh_eth_soft_reset_gether,
.chip_reset = sh_eth_chip_reset_r8a7740,
.set_duplex = sh_eth_set_duplex,
.set_rate = sh_eth_set_rate_gether,
.register_type = SH_ETH_REG_GIGABIT,
.edtrr_trns = EDTRR_TRNS_GETHER,
.ecsr_value = ECSR_ICD | ECSR_MPD,
.ecsipr_value = ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP,
.eesipr_value = EESIPR_RFCOFIP | EESIPR_ECIIP |
EESIPR_FTCIP | EESIPR_TDEIP | EESIPR_TFUFIP |
EESIPR_FRIP | EESIPR_RDEIP | EESIPR_RFOFIP |
0x0000f000 | EESIPR_CNDIP | EESIPR_DLCIP |
EESIPR_CDIP | EESIPR_TROIP | EESIPR_RMAFIP |
EESIPR_CEEFIP | EESIPR_CELFIP |
EESIPR_RRFIP | EESIPR_RTLFIP | EESIPR_RTSFIP |
EESIPR_PREIP | EESIPR_CERFIP,
.tx_check = EESR_TC1 | EESR_FTC,
.eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT |
EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE |
EESR_TDE,
.fdr_value = 0x0000070f,
.apr = 1,
.mpr = 1,
.tpauser = 1,
.bculr = 1,
.hw_swap = 1,
.rpadir = 1,
.no_trimd = 1,
.no_ade = 1,
.xdfar_rw = 1,
.csmr = 1,
.rx_csum = 1,
.tsu = 1,
.select_mii = 1,
.magic = 1,
.cexcr = 1,
};
/* There is CPU dependent code */
static void sh_eth_set_rate_rcar(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
switch (mdp->speed) {
case 10: /* 10BASE */
sh_eth_modify(ndev, ECMR, ECMR_ELB, 0);
break;
case 100:/* 100BASE */
sh_eth_modify(ndev, ECMR, ECMR_ELB, ECMR_ELB);
break;
}
}
/* R-Car Gen1 */
static struct sh_eth_cpu_data rcar_gen1_data = {
.soft_reset = sh_eth_soft_reset,
.set_duplex = sh_eth_set_duplex,
.set_rate = sh_eth_set_rate_rcar,
.register_type = SH_ETH_REG_FAST_RCAR,
.edtrr_trns = EDTRR_TRNS_ETHER,
.ecsr_value = ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD,
.ecsipr_value = ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | ECSIPR_ICDIP,
.eesipr_value = EESIPR_RFCOFIP | EESIPR_ADEIP | EESIPR_ECIIP |
EESIPR_FTCIP | EESIPR_TDEIP | EESIPR_TFUFIP |
EESIPR_FRIP | EESIPR_RDEIP | EESIPR_RFOFIP |
EESIPR_RMAFIP | EESIPR_RRFIP |
EESIPR_RTLFIP | EESIPR_RTSFIP |
EESIPR_PREIP | EESIPR_CERFIP,
.tx_check = EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_TRO,
.eesr_err_check = EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE |
EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE,
.fdr_value = 0x00000f0f,
.apr = 1,
.mpr = 1,
.tpauser = 1,
.hw_swap = 1,
.no_xdfar = 1,
};
/* R-Car Gen2 and RZ/G1 */
static struct sh_eth_cpu_data rcar_gen2_data = {
.soft_reset = sh_eth_soft_reset,
.set_duplex = sh_eth_set_duplex,
.set_rate = sh_eth_set_rate_rcar,
.register_type = SH_ETH_REG_FAST_RCAR,
.edtrr_trns = EDTRR_TRNS_ETHER,
.ecsr_value = ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD | ECSR_MPD,
.ecsipr_value = ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | ECSIPR_ICDIP |
ECSIPR_MPDIP,
.eesipr_value = EESIPR_RFCOFIP | EESIPR_ADEIP | EESIPR_ECIIP |
EESIPR_FTCIP | EESIPR_TDEIP | EESIPR_TFUFIP |
EESIPR_FRIP | EESIPR_RDEIP | EESIPR_RFOFIP |
EESIPR_RMAFIP | EESIPR_RRFIP |
EESIPR_RTLFIP | EESIPR_RTSFIP |
EESIPR_PREIP | EESIPR_CERFIP,
.tx_check = EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_TRO,
.eesr_err_check = EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE |
EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE,
.fdr_value = 0x00000f0f,
.trscer_err_mask = DESC_I_RINT8,
.apr = 1,
.mpr = 1,
.tpauser = 1,
.hw_swap = 1,
.no_xdfar = 1,
.rmiimode = 1,
.magic = 1,
};
/* R8A77980 */
static struct sh_eth_cpu_data r8a77980_data = {
.soft_reset = sh_eth_soft_reset_gether,
.set_duplex = sh_eth_set_duplex,
.set_rate = sh_eth_set_rate_gether,
.register_type = SH_ETH_REG_GIGABIT,
.edtrr_trns = EDTRR_TRNS_GETHER,
.ecsr_value = ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD | ECSR_MPD,
.ecsipr_value = ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | ECSIPR_ICDIP |
ECSIPR_MPDIP,
.eesipr_value = EESIPR_RFCOFIP | EESIPR_ECIIP |
EESIPR_FTCIP | EESIPR_TDEIP | EESIPR_TFUFIP |
EESIPR_FRIP | EESIPR_RDEIP | EESIPR_RFOFIP |
EESIPR_RMAFIP | EESIPR_RRFIP |
EESIPR_RTLFIP | EESIPR_RTSFIP |
EESIPR_PREIP | EESIPR_CERFIP,
.tx_check = EESR_FTC | EESR_CD | EESR_TRO,
.eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT |
EESR_RFE | EESR_RDE | EESR_RFRMER |
EESR_TFE | EESR_TDE | EESR_ECI,
.fdr_value = 0x0000070f,
.apr = 1,
.mpr = 1,
.tpauser = 1,
.bculr = 1,
.hw_swap = 1,
.nbst = 1,
.rpadir = 1,
.no_trimd = 1,
.no_ade = 1,
.xdfar_rw = 1,
.csmr = 1,
.rx_csum = 1,
.select_mii = 1,
.magic = 1,
.cexcr = 1,
};
/* R7S9210 */
static struct sh_eth_cpu_data r7s9210_data = {
.soft_reset = sh_eth_soft_reset,
.set_duplex = sh_eth_set_duplex,
.set_rate = sh_eth_set_rate_rcar,
.register_type = SH_ETH_REG_FAST_SH4,
.edtrr_trns = EDTRR_TRNS_ETHER,
.ecsr_value = ECSR_ICD,
.ecsipr_value = ECSIPR_ICDIP,
.eesipr_value = EESIPR_TWBIP | EESIPR_TABTIP | EESIPR_RABTIP |
EESIPR_RFCOFIP | EESIPR_ECIIP | EESIPR_FTCIP |
EESIPR_TDEIP | EESIPR_TFUFIP | EESIPR_FRIP |
EESIPR_RDEIP | EESIPR_RFOFIP | EESIPR_CNDIP |
EESIPR_DLCIP | EESIPR_CDIP | EESIPR_TROIP |
EESIPR_RMAFIP | EESIPR_RRFIP | EESIPR_RTLFIP |
EESIPR_RTSFIP | EESIPR_PREIP | EESIPR_CERFIP,
.tx_check = EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_TRO,
.eesr_err_check = EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE |
EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE,
.fdr_value = 0x0000070f,
.apr = 1,
.mpr = 1,
.tpauser = 1,
.hw_swap = 1,
.rpadir = 1,
.no_ade = 1,
.xdfar_rw = 1,
};
#endif /* CONFIG_OF */
static void sh_eth_set_rate_sh7724(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
switch (mdp->speed) {
case 10: /* 10BASE */
sh_eth_modify(ndev, ECMR, ECMR_RTM, 0);
break;
case 100:/* 100BASE */
sh_eth_modify(ndev, ECMR, ECMR_RTM, ECMR_RTM);
break;
}
}
/* SH7724 */
static struct sh_eth_cpu_data sh7724_data = {
.soft_reset = sh_eth_soft_reset,
.set_duplex = sh_eth_set_duplex,
.set_rate = sh_eth_set_rate_sh7724,
.register_type = SH_ETH_REG_FAST_SH4,
.edtrr_trns = EDTRR_TRNS_ETHER,
.ecsr_value = ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD,
.ecsipr_value = ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | ECSIPR_ICDIP,
.eesipr_value = EESIPR_RFCOFIP | EESIPR_ADEIP | EESIPR_ECIIP |
EESIPR_FTCIP | EESIPR_TDEIP | EESIPR_TFUFIP |
EESIPR_FRIP | EESIPR_RDEIP | EESIPR_RFOFIP |
EESIPR_RMAFIP | EESIPR_RRFIP |
EESIPR_RTLFIP | EESIPR_RTSFIP |
EESIPR_PREIP | EESIPR_CERFIP,
.tx_check = EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_TRO,
.eesr_err_check = EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE |
EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE,
.apr = 1,
.mpr = 1,
.tpauser = 1,
.hw_swap = 1,
.rpadir = 1,
};
static void sh_eth_set_rate_sh7757(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
switch (mdp->speed) {
case 10: /* 10BASE */
sh_eth_write(ndev, 0, RTRATE);
break;
case 100:/* 100BASE */
sh_eth_write(ndev, 1, RTRATE);
break;
}
}
/* SH7757 */
static struct sh_eth_cpu_data sh7757_data = {
.soft_reset = sh_eth_soft_reset,
.set_duplex = sh_eth_set_duplex,
.set_rate = sh_eth_set_rate_sh7757,
.register_type = SH_ETH_REG_FAST_SH4,
.edtrr_trns = EDTRR_TRNS_ETHER,
.eesipr_value = EESIPR_RFCOFIP | EESIPR_ECIIP |
EESIPR_FTCIP | EESIPR_TDEIP | EESIPR_TFUFIP |
EESIPR_FRIP | EESIPR_RDEIP | EESIPR_RFOFIP |
0x0000f000 | EESIPR_CNDIP | EESIPR_DLCIP |
EESIPR_CDIP | EESIPR_TROIP | EESIPR_RMAFIP |
EESIPR_CEEFIP | EESIPR_CELFIP |
EESIPR_RRFIP | EESIPR_RTLFIP | EESIPR_RTSFIP |
EESIPR_PREIP | EESIPR_CERFIP,
.tx_check = EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_TRO,
.eesr_err_check = EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE |
EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE,
.irq_flags = IRQF_SHARED,
.apr = 1,
.mpr = 1,
.tpauser = 1,
.hw_swap = 1,
.no_ade = 1,
.rpadir = 1,
.rtrate = 1,
.dual_port = 1,
};
#define SH_GIGA_ETH_BASE 0xfee00000UL
#define GIGA_MALR(port) (SH_GIGA_ETH_BASE + 0x800 * (port) + 0x05c8)
#define GIGA_MAHR(port) (SH_GIGA_ETH_BASE + 0x800 * (port) + 0x05c0)
static void sh_eth_chip_reset_giga(struct net_device *ndev)
{
u32 mahr[2], malr[2];
int i;
/* save MAHR and MALR */
for (i = 0; i < 2; i++) {
malr[i] = ioread32((void *)GIGA_MALR(i));
mahr[i] = ioread32((void *)GIGA_MAHR(i));
}
sh_eth_chip_reset(ndev);
/* restore MAHR and MALR */
for (i = 0; i < 2; i++) {
iowrite32(malr[i], (void *)GIGA_MALR(i));
iowrite32(mahr[i], (void *)GIGA_MAHR(i));
}
}
static void sh_eth_set_rate_giga(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
switch (mdp->speed) {
case 10: /* 10BASE */
sh_eth_write(ndev, 0x00000000, GECMR);
break;
case 100:/* 100BASE */
sh_eth_write(ndev, 0x00000010, GECMR);
break;
case 1000: /* 1000BASE */
sh_eth_write(ndev, 0x00000020, GECMR);
break;
}
}
/* SH7757(GETHERC) */
static struct sh_eth_cpu_data sh7757_data_giga = {
.soft_reset = sh_eth_soft_reset_gether,
.chip_reset = sh_eth_chip_reset_giga,
.set_duplex = sh_eth_set_duplex,
.set_rate = sh_eth_set_rate_giga,
.register_type = SH_ETH_REG_GIGABIT,
.edtrr_trns = EDTRR_TRNS_GETHER,
.ecsr_value = ECSR_ICD | ECSR_MPD,
.ecsipr_value = ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP,
.eesipr_value = EESIPR_RFCOFIP | EESIPR_ECIIP |
EESIPR_FTCIP | EESIPR_TDEIP | EESIPR_TFUFIP |
EESIPR_FRIP | EESIPR_RDEIP | EESIPR_RFOFIP |
0x0000f000 | EESIPR_CNDIP | EESIPR_DLCIP |
EESIPR_CDIP | EESIPR_TROIP | EESIPR_RMAFIP |
EESIPR_CEEFIP | EESIPR_CELFIP |
EESIPR_RRFIP | EESIPR_RTLFIP | EESIPR_RTSFIP |
EESIPR_PREIP | EESIPR_CERFIP,
.tx_check = EESR_TC1 | EESR_FTC,
.eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT |
EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE |
EESR_TDE,
.fdr_value = 0x0000072f,
.irq_flags = IRQF_SHARED,
.apr = 1,
.mpr = 1,
.tpauser = 1,
.bculr = 1,
.hw_swap = 1,
.rpadir = 1,
.no_trimd = 1,
.no_ade = 1,
.xdfar_rw = 1,
.tsu = 1,
.cexcr = 1,
.dual_port = 1,
};
/* SH7734 */
static struct sh_eth_cpu_data sh7734_data = {
.soft_reset = sh_eth_soft_reset_gether,
.chip_reset = sh_eth_chip_reset,
.set_duplex = sh_eth_set_duplex,
.set_rate = sh_eth_set_rate_gether,
.register_type = SH_ETH_REG_GIGABIT,
.edtrr_trns = EDTRR_TRNS_GETHER,
.ecsr_value = ECSR_ICD | ECSR_MPD,
.ecsipr_value = ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP,
.eesipr_value = EESIPR_RFCOFIP | EESIPR_ECIIP |
EESIPR_FTCIP | EESIPR_TDEIP | EESIPR_TFUFIP |
EESIPR_FRIP | EESIPR_RDEIP | EESIPR_RFOFIP |
EESIPR_DLCIP | EESIPR_CDIP | EESIPR_TROIP |
EESIPR_RMAFIP | EESIPR_CEEFIP | EESIPR_CELFIP |
EESIPR_RRFIP | EESIPR_RTLFIP | EESIPR_RTSFIP |
EESIPR_PREIP | EESIPR_CERFIP,
.tx_check = EESR_TC1 | EESR_FTC,
.eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT |
EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE |
EESR_TDE,
.apr = 1,
.mpr = 1,
.tpauser = 1,
.bculr = 1,
.hw_swap = 1,
.no_trimd = 1,
.no_ade = 1,
.xdfar_rw = 1,
.tsu = 1,
.csmr = 1,
.rx_csum = 1,
.select_mii = 1,
.magic = 1,
.cexcr = 1,
};
/* SH7763 */
static struct sh_eth_cpu_data sh7763_data = {
.soft_reset = sh_eth_soft_reset_gether,
.chip_reset = sh_eth_chip_reset,
.set_duplex = sh_eth_set_duplex,
.set_rate = sh_eth_set_rate_gether,
.register_type = SH_ETH_REG_GIGABIT,
.edtrr_trns = EDTRR_TRNS_GETHER,
.ecsr_value = ECSR_ICD | ECSR_MPD,
.ecsipr_value = ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP,
.eesipr_value = EESIPR_RFCOFIP | EESIPR_ECIIP |
EESIPR_FTCIP | EESIPR_TDEIP | EESIPR_TFUFIP |
EESIPR_FRIP | EESIPR_RDEIP | EESIPR_RFOFIP |
EESIPR_DLCIP | EESIPR_CDIP | EESIPR_TROIP |
EESIPR_RMAFIP | EESIPR_CEEFIP | EESIPR_CELFIP |
EESIPR_RRFIP | EESIPR_RTLFIP | EESIPR_RTSFIP |
EESIPR_PREIP | EESIPR_CERFIP,
.tx_check = EESR_TC1 | EESR_FTC,
.eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT |
EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE,
.apr = 1,
.mpr = 1,
.tpauser = 1,
.bculr = 1,
.hw_swap = 1,
.no_trimd = 1,
.no_ade = 1,
.xdfar_rw = 1,
.tsu = 1,
.irq_flags = IRQF_SHARED,
.magic = 1,
.cexcr = 1,
.rx_csum = 1,
.dual_port = 1,
};
static struct sh_eth_cpu_data sh7619_data = {
.soft_reset = sh_eth_soft_reset,
.register_type = SH_ETH_REG_FAST_SH3_SH2,
.edtrr_trns = EDTRR_TRNS_ETHER,
.eesipr_value = EESIPR_RFCOFIP | EESIPR_ECIIP |
EESIPR_FTCIP | EESIPR_TDEIP | EESIPR_TFUFIP |
EESIPR_FRIP | EESIPR_RDEIP | EESIPR_RFOFIP |
0x0000f000 | EESIPR_CNDIP | EESIPR_DLCIP |
EESIPR_CDIP | EESIPR_TROIP | EESIPR_RMAFIP |
EESIPR_CEEFIP | EESIPR_CELFIP |
EESIPR_RRFIP | EESIPR_RTLFIP | EESIPR_RTSFIP |
EESIPR_PREIP | EESIPR_CERFIP,
.apr = 1,
.mpr = 1,
.tpauser = 1,
.hw_swap = 1,
};
static struct sh_eth_cpu_data sh771x_data = {
.soft_reset = sh_eth_soft_reset,
.register_type = SH_ETH_REG_FAST_SH3_SH2,
.edtrr_trns = EDTRR_TRNS_ETHER,
.eesipr_value = EESIPR_RFCOFIP | EESIPR_ECIIP |
EESIPR_FTCIP | EESIPR_TDEIP | EESIPR_TFUFIP |
EESIPR_FRIP | EESIPR_RDEIP | EESIPR_RFOFIP |
0x0000f000 | EESIPR_CNDIP | EESIPR_DLCIP |
EESIPR_CDIP | EESIPR_TROIP | EESIPR_RMAFIP |
EESIPR_CEEFIP | EESIPR_CELFIP |
EESIPR_RRFIP | EESIPR_RTLFIP | EESIPR_RTSFIP |
EESIPR_PREIP | EESIPR_CERFIP,
.tsu = 1,
.dual_port = 1,
};
static void sh_eth_set_default_cpu_data(struct sh_eth_cpu_data *cd)
{
if (!cd->ecsr_value)
cd->ecsr_value = DEFAULT_ECSR_INIT;
if (!cd->ecsipr_value)
cd->ecsipr_value = DEFAULT_ECSIPR_INIT;
if (!cd->fcftr_value)
cd->fcftr_value = DEFAULT_FIFO_F_D_RFF |
DEFAULT_FIFO_F_D_RFD;
if (!cd->fdr_value)
cd->fdr_value = DEFAULT_FDR_INIT;
if (!cd->tx_check)
cd->tx_check = DEFAULT_TX_CHECK;
if (!cd->eesr_err_check)
cd->eesr_err_check = DEFAULT_EESR_ERR_CHECK;
if (!cd->trscer_err_mask)
cd->trscer_err_mask = DEFAULT_TRSCER_ERR_MASK;
}
static void sh_eth_set_receive_align(struct sk_buff *skb)
{
uintptr_t reserve = (uintptr_t)skb->data & (SH_ETH_RX_ALIGN - 1);
if (reserve)
skb_reserve(skb, SH_ETH_RX_ALIGN - reserve);
}
/* Program the hardware MAC address from dev->dev_addr. */
static void update_mac_address(struct net_device *ndev)
{
sh_eth_write(ndev,
(ndev->dev_addr[0] << 24) | (ndev->dev_addr[1] << 16) |
(ndev->dev_addr[2] << 8) | (ndev->dev_addr[3]), MAHR);
sh_eth_write(ndev,
(ndev->dev_addr[4] << 8) | (ndev->dev_addr[5]), MALR);
}
/* Get MAC address from SuperH MAC address register
*
* SuperH's Ethernet device doesn't have 'ROM' to MAC address.
* This driver get MAC address that use by bootloader(U-boot or sh-ipl+g).
* When you want use this device, you must set MAC address in bootloader.
*
*/
static void read_mac_address(struct net_device *ndev, unsigned char *mac)
{
if (mac[0] || mac[1] || mac[2] || mac[3] || mac[4] || mac[5]) {
memcpy(ndev->dev_addr, mac, ETH_ALEN);
} else {
u32 mahr = sh_eth_read(ndev, MAHR);
u32 malr = sh_eth_read(ndev, MALR);
ndev->dev_addr[0] = (mahr >> 24) & 0xFF;
ndev->dev_addr[1] = (mahr >> 16) & 0xFF;
ndev->dev_addr[2] = (mahr >> 8) & 0xFF;
ndev->dev_addr[3] = (mahr >> 0) & 0xFF;
ndev->dev_addr[4] = (malr >> 8) & 0xFF;
ndev->dev_addr[5] = (malr >> 0) & 0xFF;
}
}
struct bb_info {
void (*set_gate)(void *addr);
struct mdiobb_ctrl ctrl;
void *addr;
};
static void sh_mdio_ctrl(struct mdiobb_ctrl *ctrl, u32 mask, int set)
{
struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl);
u32 pir;
if (bitbang->set_gate)
bitbang->set_gate(bitbang->addr);
pir = ioread32(bitbang->addr);
if (set)
pir |= mask;
else
pir &= ~mask;
iowrite32(pir, bitbang->addr);
}
/* Data I/O pin control */
static void sh_mmd_ctrl(struct mdiobb_ctrl *ctrl, int bit)
{
sh_mdio_ctrl(ctrl, PIR_MMD, bit);
}
/* Set bit data*/
static void sh_set_mdio(struct mdiobb_ctrl *ctrl, int bit)
{
sh_mdio_ctrl(ctrl, PIR_MDO, bit);
}
/* Get bit data*/
static int sh_get_mdio(struct mdiobb_ctrl *ctrl)
{
struct bb_info *bitbang = container_of(ctrl, struct bb_info, ctrl);
if (bitbang->set_gate)
bitbang->set_gate(bitbang->addr);
return (ioread32(bitbang->addr) & PIR_MDI) != 0;
}
/* MDC pin control */
static void sh_mdc_ctrl(struct mdiobb_ctrl *ctrl, int bit)
{
sh_mdio_ctrl(ctrl, PIR_MDC, bit);
}
/* mdio bus control struct */
static struct mdiobb_ops bb_ops = {
.owner = THIS_MODULE,
.set_mdc = sh_mdc_ctrl,
.set_mdio_dir = sh_mmd_ctrl,
.set_mdio_data = sh_set_mdio,
.get_mdio_data = sh_get_mdio,
};
/* free Tx skb function */
static int sh_eth_tx_free(struct net_device *ndev, bool sent_only)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_txdesc *txdesc;
int free_num = 0;
int entry;
bool sent;
for (; mdp->cur_tx - mdp->dirty_tx > 0; mdp->dirty_tx++) {
entry = mdp->dirty_tx % mdp->num_tx_ring;
txdesc = &mdp->tx_ring[entry];
sent = !(txdesc->status & cpu_to_le32(TD_TACT));
if (sent_only && !sent)
break;
/* TACT bit must be checked before all the following reads */
dma_rmb();
netif_info(mdp, tx_done, ndev,
"tx entry %d status 0x%08x\n",
entry, le32_to_cpu(txdesc->status));
/* Free the original skb. */
if (mdp->tx_skbuff[entry]) {
dma_unmap_single(&mdp->pdev->dev,
le32_to_cpu(txdesc->addr),
le32_to_cpu(txdesc->len) >> 16,
DMA_TO_DEVICE);
dev_kfree_skb_irq(mdp->tx_skbuff[entry]);
mdp->tx_skbuff[entry] = NULL;
free_num++;
}
txdesc->status = cpu_to_le32(TD_TFP);
if (entry >= mdp->num_tx_ring - 1)
txdesc->status |= cpu_to_le32(TD_TDLE);
if (sent) {
ndev->stats.tx_packets++;
ndev->stats.tx_bytes += le32_to_cpu(txdesc->len) >> 16;
}
}
return free_num;
}
/* free skb and descriptor buffer */
static void sh_eth_ring_free(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int ringsize, i;
if (mdp->rx_ring) {
for (i = 0; i < mdp->num_rx_ring; i++) {
if (mdp->rx_skbuff[i]) {
struct sh_eth_rxdesc *rxdesc = &mdp->rx_ring[i];
dma_unmap_single(&mdp->pdev->dev,
le32_to_cpu(rxdesc->addr),
ALIGN(mdp->rx_buf_sz, 32),
DMA_FROM_DEVICE);
}
}
ringsize = sizeof(struct sh_eth_rxdesc) * mdp->num_rx_ring;
dma_free_coherent(&mdp->pdev->dev, ringsize, mdp->rx_ring,
mdp->rx_desc_dma);
mdp->rx_ring = NULL;
}
/* Free Rx skb ringbuffer */
if (mdp->rx_skbuff) {
for (i = 0; i < mdp->num_rx_ring; i++)
dev_kfree_skb(mdp->rx_skbuff[i]);
}
kfree(mdp->rx_skbuff);
mdp->rx_skbuff = NULL;
if (mdp->tx_ring) {
sh_eth_tx_free(ndev, false);
ringsize = sizeof(struct sh_eth_txdesc) * mdp->num_tx_ring;
dma_free_coherent(&mdp->pdev->dev, ringsize, mdp->tx_ring,
mdp->tx_desc_dma);
mdp->tx_ring = NULL;
}
/* Free Tx skb ringbuffer */
kfree(mdp->tx_skbuff);
mdp->tx_skbuff = NULL;
}
/* format skb and descriptor buffer */
static void sh_eth_ring_format(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int i;
struct sk_buff *skb;
struct sh_eth_rxdesc *rxdesc = NULL;
struct sh_eth_txdesc *txdesc = NULL;
int rx_ringsize = sizeof(*rxdesc) * mdp->num_rx_ring;
int tx_ringsize = sizeof(*txdesc) * mdp->num_tx_ring;
int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN + 32 - 1;
dma_addr_t dma_addr;
u32 buf_len;
mdp->cur_rx = 0;
mdp->cur_tx = 0;
mdp->dirty_rx = 0;
mdp->dirty_tx = 0;
memset(mdp->rx_ring, 0, rx_ringsize);
/* build Rx ring buffer */
for (i = 0; i < mdp->num_rx_ring; i++) {
/* skb */
mdp->rx_skbuff[i] = NULL;
skb = netdev_alloc_skb(ndev, skbuff_size);
if (skb == NULL)
break;
sh_eth_set_receive_align(skb);
/* The size of the buffer is a multiple of 32 bytes. */
buf_len = ALIGN(mdp->rx_buf_sz, 32);
dma_addr = dma_map_single(&mdp->pdev->dev, skb->data, buf_len,
DMA_FROM_DEVICE);
if (dma_mapping_error(&mdp->pdev->dev, dma_addr)) {
kfree_skb(skb);
break;
}
mdp->rx_skbuff[i] = skb;
/* RX descriptor */
rxdesc = &mdp->rx_ring[i];
rxdesc->len = cpu_to_le32(buf_len << 16);
rxdesc->addr = cpu_to_le32(dma_addr);
rxdesc->status = cpu_to_le32(RD_RACT | RD_RFP);
/* Rx descriptor address set */
if (i == 0) {
sh_eth_write(ndev, mdp->rx_desc_dma, RDLAR);
if (mdp->cd->xdfar_rw)
sh_eth_write(ndev, mdp->rx_desc_dma, RDFAR);
}
}
mdp->dirty_rx = (u32) (i - mdp->num_rx_ring);
/* Mark the last entry as wrapping the ring. */
if (rxdesc)
rxdesc->status |= cpu_to_le32(RD_RDLE);
memset(mdp->tx_ring, 0, tx_ringsize);
/* build Tx ring buffer */
for (i = 0; i < mdp->num_tx_ring; i++) {
mdp->tx_skbuff[i] = NULL;
txdesc = &mdp->tx_ring[i];
txdesc->status = cpu_to_le32(TD_TFP);
txdesc->len = cpu_to_le32(0);
if (i == 0) {
/* Tx descriptor address set */
sh_eth_write(ndev, mdp->tx_desc_dma, TDLAR);
if (mdp->cd->xdfar_rw)
sh_eth_write(ndev, mdp->tx_desc_dma, TDFAR);
}
}
txdesc->status |= cpu_to_le32(TD_TDLE);
}
/* Get skb and descriptor buffer */
static int sh_eth_ring_init(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int rx_ringsize, tx_ringsize;
/* +26 gets the maximum ethernet encapsulation, +7 & ~7 because the
* card needs room to do 8 byte alignment, +2 so we can reserve
* the first 2 bytes, and +16 gets room for the status word from the
* card.
*/
mdp->rx_buf_sz = (ndev->mtu <= 1492 ? PKT_BUF_SZ :
(((ndev->mtu + 26 + 7) & ~7) + 2 + 16));
if (mdp->cd->rpadir)
mdp->rx_buf_sz += NET_IP_ALIGN;
/* Allocate RX and TX skb rings */
mdp->rx_skbuff = kcalloc(mdp->num_rx_ring, sizeof(*mdp->rx_skbuff),
GFP_KERNEL);
if (!mdp->rx_skbuff)
return -ENOMEM;
mdp->tx_skbuff = kcalloc(mdp->num_tx_ring, sizeof(*mdp->tx_skbuff),
GFP_KERNEL);
if (!mdp->tx_skbuff)
goto ring_free;
/* Allocate all Rx descriptors. */
rx_ringsize = sizeof(struct sh_eth_rxdesc) * mdp->num_rx_ring;
mdp->rx_ring = dma_alloc_coherent(&mdp->pdev->dev, rx_ringsize,
&mdp->rx_desc_dma, GFP_KERNEL);
if (!mdp->rx_ring)
goto ring_free;
mdp->dirty_rx = 0;
/* Allocate all Tx descriptors. */
tx_ringsize = sizeof(struct sh_eth_txdesc) * mdp->num_tx_ring;
mdp->tx_ring = dma_alloc_coherent(&mdp->pdev->dev, tx_ringsize,
&mdp->tx_desc_dma, GFP_KERNEL);
if (!mdp->tx_ring)
goto ring_free;
return 0;
ring_free:
/* Free Rx and Tx skb ring buffer and DMA buffer */
sh_eth_ring_free(ndev);
return -ENOMEM;
}
static int sh_eth_dev_init(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int ret;
/* Soft Reset */
ret = mdp->cd->soft_reset(ndev);
if (ret)
return ret;
if (mdp->cd->rmiimode)
sh_eth_write(ndev, 0x1, RMIIMODE);
/* Descriptor format */
sh_eth_ring_format(ndev);
if (mdp->cd->rpadir)
sh_eth_write(ndev, NET_IP_ALIGN << 16, RPADIR);
/* all sh_eth int mask */
sh_eth_write(ndev, 0, EESIPR);
#if defined(__LITTLE_ENDIAN)
if (mdp->cd->hw_swap)
sh_eth_write(ndev, EDMR_EL, EDMR);
else
#endif
sh_eth_write(ndev, 0, EDMR);
/* FIFO size set */
sh_eth_write(ndev, mdp->cd->fdr_value, FDR);
sh_eth_write(ndev, 0, TFTR);
2014-06-03 05:21:13 -06:00
/* Frame recv control (enable multiple-packets per rx irq) */
sh_eth_write(ndev, RMCR_RNC, RMCR);
sh_eth_write(ndev, mdp->cd->trscer_err_mask, TRSCER);
/* DMA transfer burst mode */
if (mdp->cd->nbst)
sh_eth_modify(ndev, EDMR, EDMR_NBST, EDMR_NBST);
/* Burst cycle count upper-limit */
if (mdp->cd->bculr)
sh_eth_write(ndev, 0x800, BCULR);
sh_eth_write(ndev, mdp->cd->fcftr_value, FCFTR);
if (!mdp->cd->no_trimd)
sh_eth_write(ndev, 0, TRIMD);
/* Recv frame limit set register */
sh_eth_write(ndev, ndev->mtu + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN,
RFLR);
sh_eth_modify(ndev, EESR, 0, 0);
mdp->irq_enabled = true;
sh_eth_write(ndev, mdp->cd->eesipr_value, EESIPR);
sh_eth: RX checksum offload support Add support for the RX checksum offload. This is enabled by default and may be disabled and re-enabled using 'ethtool': # ethtool -K eth0 rx off # ethtool -K eth0 rx on Some Ether MACs provide a simple checksumming scheme which appears to be completely compatible with CHECKSUM_COMPLETE: sum of all packet data after the L2 header is appended to packet data; this may be trivially read by the driver and used to update the skb accordingly. The same checksumming scheme is implemented in the EtherAVB MACs and now supported by the 'ravb' driver. In terms of performance, throughput is close to gigabit line rate with the RX checksum offload both enabled and disabled. The 'perf' output, however, appears to indicate that significantly less time is spent in do_csum() -- this is as expected. Test results with RX checksum offload enabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 933.93 [ perf record: Woken up 8 times to write data ] [ perf record: Captured and wrote 1.955 MB perf.data (41940 samples) ] ~/netperf-2.2pl4# perf report Samples: 41K of event 'cycles:ppp', Event count (approx.): 9915302763 Overhead Command Shared Object Symbol 9.44% netperf [kernel.kallsyms] [k] __arch_copy_to_user 7.75% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 6.31% swapper [kernel.kallsyms] [k] default_idle_call 5.89% swapper [kernel.kallsyms] [k] arch_cpu_idle 4.37% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 4.02% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.52% netperf [kernel.kallsyms] [k] preempt_count_sub 1.81% netperf [kernel.kallsyms] [k] tcp_recvmsg 1.80% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irqres 1.78% netperf [kernel.kallsyms] [k] preempt_count_add 1.36% netperf [kernel.kallsyms] [k] __tcp_transmit_skb 1.20% netperf [kernel.kallsyms] [k] __local_bh_enable_ip 1.10% netperf [kernel.kallsyms] [k] sh_eth_start_xmit Test results with RX checksum offload disabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 932.04 [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 3.642 MB perf.data (78817 samples) ] ~/netperf-2.2pl4# perf report Samples: 78K of event 'cycles:ppp', Event count (approx.): 18091442796 Overhead Command Shared Object Symbol 7.00% swapper [kernel.kallsyms] [k] do_csum 3.94% swapper [kernel.kallsyms] [k] sh_eth_poll 3.83% ksoftirqd/0 [kernel.kallsyms] [k] do_csum 3.23% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.87% netperf [kernel.kallsyms] [k] __arch_copy_to_user 2.86% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.13% swapper [kernel.kallsyms] [k] default_idle_call 2.12% ksoftirqd/0 [kernel.kallsyms] [k] sh_eth_poll 2.02% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.84% swapper [kernel.kallsyms] [k] __softirqentry_text_start 1.64% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 1.53% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 1.32% netperf [kernel.kallsyms] [k] preempt_count_sub 1.27% swapper [kernel.kallsyms] [k] __pi___inval_dcache_area 1.22% swapper [kernel.kallsyms] [k] check_preemption_disabled 1.01% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore The above results collected on the R-Car V3H Starter Kit board. Based on the commit 4d86d3818627 ("ravb: RX checksum offload")... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 11:06:52 -07:00
/* EMAC Mode: PAUSE prohibition; Duplex; RX Checksum; TX; RX */
sh_eth_write(ndev, ECMR_ZPF | (mdp->duplex ? ECMR_DM : 0) |
sh_eth: RX checksum offload support Add support for the RX checksum offload. This is enabled by default and may be disabled and re-enabled using 'ethtool': # ethtool -K eth0 rx off # ethtool -K eth0 rx on Some Ether MACs provide a simple checksumming scheme which appears to be completely compatible with CHECKSUM_COMPLETE: sum of all packet data after the L2 header is appended to packet data; this may be trivially read by the driver and used to update the skb accordingly. The same checksumming scheme is implemented in the EtherAVB MACs and now supported by the 'ravb' driver. In terms of performance, throughput is close to gigabit line rate with the RX checksum offload both enabled and disabled. The 'perf' output, however, appears to indicate that significantly less time is spent in do_csum() -- this is as expected. Test results with RX checksum offload enabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 933.93 [ perf record: Woken up 8 times to write data ] [ perf record: Captured and wrote 1.955 MB perf.data (41940 samples) ] ~/netperf-2.2pl4# perf report Samples: 41K of event 'cycles:ppp', Event count (approx.): 9915302763 Overhead Command Shared Object Symbol 9.44% netperf [kernel.kallsyms] [k] __arch_copy_to_user 7.75% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 6.31% swapper [kernel.kallsyms] [k] default_idle_call 5.89% swapper [kernel.kallsyms] [k] arch_cpu_idle 4.37% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 4.02% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.52% netperf [kernel.kallsyms] [k] preempt_count_sub 1.81% netperf [kernel.kallsyms] [k] tcp_recvmsg 1.80% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irqres 1.78% netperf [kernel.kallsyms] [k] preempt_count_add 1.36% netperf [kernel.kallsyms] [k] __tcp_transmit_skb 1.20% netperf [kernel.kallsyms] [k] __local_bh_enable_ip 1.10% netperf [kernel.kallsyms] [k] sh_eth_start_xmit Test results with RX checksum offload disabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 932.04 [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 3.642 MB perf.data (78817 samples) ] ~/netperf-2.2pl4# perf report Samples: 78K of event 'cycles:ppp', Event count (approx.): 18091442796 Overhead Command Shared Object Symbol 7.00% swapper [kernel.kallsyms] [k] do_csum 3.94% swapper [kernel.kallsyms] [k] sh_eth_poll 3.83% ksoftirqd/0 [kernel.kallsyms] [k] do_csum 3.23% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.87% netperf [kernel.kallsyms] [k] __arch_copy_to_user 2.86% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.13% swapper [kernel.kallsyms] [k] default_idle_call 2.12% ksoftirqd/0 [kernel.kallsyms] [k] sh_eth_poll 2.02% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.84% swapper [kernel.kallsyms] [k] __softirqentry_text_start 1.64% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 1.53% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 1.32% netperf [kernel.kallsyms] [k] preempt_count_sub 1.27% swapper [kernel.kallsyms] [k] __pi___inval_dcache_area 1.22% swapper [kernel.kallsyms] [k] check_preemption_disabled 1.01% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore The above results collected on the R-Car V3H Starter Kit board. Based on the commit 4d86d3818627 ("ravb: RX checksum offload")... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 11:06:52 -07:00
(ndev->features & NETIF_F_RXCSUM ? ECMR_RCSC : 0) |
ECMR_TE | ECMR_RE, ECMR);
if (mdp->cd->set_rate)
mdp->cd->set_rate(ndev);
/* E-MAC Status Register clear */
sh_eth_write(ndev, mdp->cd->ecsr_value, ECSR);
/* E-MAC Interrupt Enable register */
sh_eth_write(ndev, mdp->cd->ecsipr_value, ECSIPR);
/* Set MAC address */
update_mac_address(ndev);
/* mask reset */
if (mdp->cd->apr)
sh_eth_write(ndev, 1, APR);
if (mdp->cd->mpr)
sh_eth_write(ndev, 1, MPR);
if (mdp->cd->tpauser)
sh_eth_write(ndev, TPAUSER_UNLIMITED, TPAUSER);
/* Setting the Rx mode will start the Rx process. */
sh_eth_write(ndev, EDRRR_R, EDRRR);
return ret;
}
sh_eth: Ensure DMA engines are stopped before freeing buffers Currently we try to clear EDRRR and EDTRR and immediately continue to free buffers. This is unsafe because: - In general, register writes are not serialised with DMA, so we still have to wait for DMA to complete somehow - The R8A7790 (R-Car H2) manual states that the TX running flag cannot be cleared by writing to EDTRR - The same manual states that clearing the RX running flag only stops RX DMA at the next packet boundary I applied this patch to the driver to detect DMA writes to freed buffers: > --- a/drivers/net/ethernet/renesas/sh_eth.c > +++ b/drivers/net/ethernet/renesas/sh_eth.c > @@ -1098,7 +1098,14 @@ static void sh_eth_ring_free(struct net_device *ndev) > /* Free Rx skb ringbuffer */ > if (mdp->rx_skbuff) { > for (i = 0; i < mdp->num_rx_ring; i++) > + memcpy(mdp->rx_skbuff[i]->data, > + "Hello, world", 12); > + msleep(100); > + for (i = 0; i < mdp->num_rx_ring; i++) { > + WARN_ON(memcmp(mdp->rx_skbuff[i]->data, > + "Hello, world", 12)); > dev_kfree_skb(mdp->rx_skbuff[i]); > + } > } > kfree(mdp->rx_skbuff); > mdp->rx_skbuff = NULL; then ran the loop: while ethtool -G eth0 rx 128 ; ethtool -G eth0 rx 64; do echo -n .; done and 'ping -f' toward the sh_eth port from another machine. The warning fired several times a minute. To fix these issues: - Deactivate all TX descriptors rather than writing to EDTRR - As there seems to be no way of telling when RX DMA is stopped, perform a soft reset to ensure that both DMA enginess are stopped - To reduce the possibility of the reset truncating a transmitted frame, disable egress and wait a reasonable time to reach a packet boundary before resetting - Update statistics before resetting (The 'reasonable time' does not allow for CS/CD in half-duplex mode, but half-duplex no longer seems reasonable!) Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 17:49:32 -07:00
static void sh_eth_dev_exit(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int i;
/* Deactivate all TX descriptors, so DMA should stop at next
* packet boundary if it's currently running
*/
for (i = 0; i < mdp->num_tx_ring; i++)
mdp->tx_ring[i].status &= ~cpu_to_le32(TD_TACT);
sh_eth: Ensure DMA engines are stopped before freeing buffers Currently we try to clear EDRRR and EDTRR and immediately continue to free buffers. This is unsafe because: - In general, register writes are not serialised with DMA, so we still have to wait for DMA to complete somehow - The R8A7790 (R-Car H2) manual states that the TX running flag cannot be cleared by writing to EDTRR - The same manual states that clearing the RX running flag only stops RX DMA at the next packet boundary I applied this patch to the driver to detect DMA writes to freed buffers: > --- a/drivers/net/ethernet/renesas/sh_eth.c > +++ b/drivers/net/ethernet/renesas/sh_eth.c > @@ -1098,7 +1098,14 @@ static void sh_eth_ring_free(struct net_device *ndev) > /* Free Rx skb ringbuffer */ > if (mdp->rx_skbuff) { > for (i = 0; i < mdp->num_rx_ring; i++) > + memcpy(mdp->rx_skbuff[i]->data, > + "Hello, world", 12); > + msleep(100); > + for (i = 0; i < mdp->num_rx_ring; i++) { > + WARN_ON(memcmp(mdp->rx_skbuff[i]->data, > + "Hello, world", 12)); > dev_kfree_skb(mdp->rx_skbuff[i]); > + } > } > kfree(mdp->rx_skbuff); > mdp->rx_skbuff = NULL; then ran the loop: while ethtool -G eth0 rx 128 ; ethtool -G eth0 rx 64; do echo -n .; done and 'ping -f' toward the sh_eth port from another machine. The warning fired several times a minute. To fix these issues: - Deactivate all TX descriptors rather than writing to EDTRR - As there seems to be no way of telling when RX DMA is stopped, perform a soft reset to ensure that both DMA enginess are stopped - To reduce the possibility of the reset truncating a transmitted frame, disable egress and wait a reasonable time to reach a packet boundary before resetting - Update statistics before resetting (The 'reasonable time' does not allow for CS/CD in half-duplex mode, but half-duplex no longer seems reasonable!) Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 17:49:32 -07:00
/* Disable TX FIFO egress to MAC */
sh_eth_rcv_snd_disable(ndev);
/* Stop RX DMA at next packet boundary */
sh_eth_write(ndev, 0, EDRRR);
/* Aside from TX DMA, we can't tell when the hardware is
* really stopped, so we need to reset to make sure.
* Before doing that, wait for long enough to *probably*
* finish transmitting the last packet and poll stats.
*/
msleep(2); /* max frame time at 10 Mbps < 1250 us */
sh_eth_get_stats(ndev);
mdp->cd->soft_reset(ndev);
/* Set the RMII mode again if required */
if (mdp->cd->rmiimode)
sh_eth_write(ndev, 0x1, RMIIMODE);
/* Set MAC address again */
update_mac_address(ndev);
sh_eth: Ensure DMA engines are stopped before freeing buffers Currently we try to clear EDRRR and EDTRR and immediately continue to free buffers. This is unsafe because: - In general, register writes are not serialised with DMA, so we still have to wait for DMA to complete somehow - The R8A7790 (R-Car H2) manual states that the TX running flag cannot be cleared by writing to EDTRR - The same manual states that clearing the RX running flag only stops RX DMA at the next packet boundary I applied this patch to the driver to detect DMA writes to freed buffers: > --- a/drivers/net/ethernet/renesas/sh_eth.c > +++ b/drivers/net/ethernet/renesas/sh_eth.c > @@ -1098,7 +1098,14 @@ static void sh_eth_ring_free(struct net_device *ndev) > /* Free Rx skb ringbuffer */ > if (mdp->rx_skbuff) { > for (i = 0; i < mdp->num_rx_ring; i++) > + memcpy(mdp->rx_skbuff[i]->data, > + "Hello, world", 12); > + msleep(100); > + for (i = 0; i < mdp->num_rx_ring; i++) { > + WARN_ON(memcmp(mdp->rx_skbuff[i]->data, > + "Hello, world", 12)); > dev_kfree_skb(mdp->rx_skbuff[i]); > + } > } > kfree(mdp->rx_skbuff); > mdp->rx_skbuff = NULL; then ran the loop: while ethtool -G eth0 rx 128 ; ethtool -G eth0 rx 64; do echo -n .; done and 'ping -f' toward the sh_eth port from another machine. The warning fired several times a minute. To fix these issues: - Deactivate all TX descriptors rather than writing to EDTRR - As there seems to be no way of telling when RX DMA is stopped, perform a soft reset to ensure that both DMA enginess are stopped - To reduce the possibility of the reset truncating a transmitted frame, disable egress and wait a reasonable time to reach a packet boundary before resetting - Update statistics before resetting (The 'reasonable time' does not allow for CS/CD in half-duplex mode, but half-duplex no longer seems reasonable!) Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 17:49:32 -07:00
}
sh_eth: RX checksum offload support Add support for the RX checksum offload. This is enabled by default and may be disabled and re-enabled using 'ethtool': # ethtool -K eth0 rx off # ethtool -K eth0 rx on Some Ether MACs provide a simple checksumming scheme which appears to be completely compatible with CHECKSUM_COMPLETE: sum of all packet data after the L2 header is appended to packet data; this may be trivially read by the driver and used to update the skb accordingly. The same checksumming scheme is implemented in the EtherAVB MACs and now supported by the 'ravb' driver. In terms of performance, throughput is close to gigabit line rate with the RX checksum offload both enabled and disabled. The 'perf' output, however, appears to indicate that significantly less time is spent in do_csum() -- this is as expected. Test results with RX checksum offload enabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 933.93 [ perf record: Woken up 8 times to write data ] [ perf record: Captured and wrote 1.955 MB perf.data (41940 samples) ] ~/netperf-2.2pl4# perf report Samples: 41K of event 'cycles:ppp', Event count (approx.): 9915302763 Overhead Command Shared Object Symbol 9.44% netperf [kernel.kallsyms] [k] __arch_copy_to_user 7.75% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 6.31% swapper [kernel.kallsyms] [k] default_idle_call 5.89% swapper [kernel.kallsyms] [k] arch_cpu_idle 4.37% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 4.02% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.52% netperf [kernel.kallsyms] [k] preempt_count_sub 1.81% netperf [kernel.kallsyms] [k] tcp_recvmsg 1.80% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irqres 1.78% netperf [kernel.kallsyms] [k] preempt_count_add 1.36% netperf [kernel.kallsyms] [k] __tcp_transmit_skb 1.20% netperf [kernel.kallsyms] [k] __local_bh_enable_ip 1.10% netperf [kernel.kallsyms] [k] sh_eth_start_xmit Test results with RX checksum offload disabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 932.04 [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 3.642 MB perf.data (78817 samples) ] ~/netperf-2.2pl4# perf report Samples: 78K of event 'cycles:ppp', Event count (approx.): 18091442796 Overhead Command Shared Object Symbol 7.00% swapper [kernel.kallsyms] [k] do_csum 3.94% swapper [kernel.kallsyms] [k] sh_eth_poll 3.83% ksoftirqd/0 [kernel.kallsyms] [k] do_csum 3.23% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.87% netperf [kernel.kallsyms] [k] __arch_copy_to_user 2.86% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.13% swapper [kernel.kallsyms] [k] default_idle_call 2.12% ksoftirqd/0 [kernel.kallsyms] [k] sh_eth_poll 2.02% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.84% swapper [kernel.kallsyms] [k] __softirqentry_text_start 1.64% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 1.53% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 1.32% netperf [kernel.kallsyms] [k] preempt_count_sub 1.27% swapper [kernel.kallsyms] [k] __pi___inval_dcache_area 1.22% swapper [kernel.kallsyms] [k] check_preemption_disabled 1.01% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore The above results collected on the R-Car V3H Starter Kit board. Based on the commit 4d86d3818627 ("ravb: RX checksum offload")... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 11:06:52 -07:00
static void sh_eth_rx_csum(struct sk_buff *skb)
{
u8 *hw_csum;
/* The hardware checksum is 2 bytes appended to packet data */
if (unlikely(skb->len < sizeof(__sum16)))
return;
hw_csum = skb_tail_pointer(skb) - sizeof(__sum16);
skb->csum = csum_unfold((__force __sum16)get_unaligned_le16(hw_csum));
skb->ip_summed = CHECKSUM_COMPLETE;
skb_trim(skb, skb->len - sizeof(__sum16));
}
/* Packet receive function */
static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_rxdesc *rxdesc;
int entry = mdp->cur_rx % mdp->num_rx_ring;
int boguscnt = (mdp->dirty_rx + mdp->num_rx_ring) - mdp->cur_rx;
int limit;
struct sk_buff *skb;
u32 desc_status;
int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN + 32 - 1;
dma_addr_t dma_addr;
u16 pkt_len;
u32 buf_len;
boguscnt = min(boguscnt, *quota);
limit = boguscnt;
rxdesc = &mdp->rx_ring[entry];
while (!(rxdesc->status & cpu_to_le32(RD_RACT))) {
/* RACT bit must be checked before all the following reads */
dma_rmb();
desc_status = le32_to_cpu(rxdesc->status);
pkt_len = le32_to_cpu(rxdesc->len) & RD_RFL;
if (--boguscnt < 0)
break;
netif_info(mdp, rx_status, ndev,
"rx entry %d status 0x%08x len %d\n",
entry, desc_status, pkt_len);
if (!(desc_status & RDFEND))
ndev->stats.rx_length_errors++;
/* In case of almost all GETHER/ETHERs, the Receive Frame State
* (RFS) bits in the Receive Descriptor 0 are from bit 9 to
* bit 0. However, in case of the R8A7740 and R7S72100
* the RFS bits are from bit 25 to bit 16. So, the
* driver needs right shifting by 16.
*/
if (mdp->cd->csmr)
desc_status >>= 16;
skb = mdp->rx_skbuff[entry];
if (desc_status & (RD_RFS1 | RD_RFS2 | RD_RFS3 | RD_RFS4 |
RD_RFS5 | RD_RFS6 | RD_RFS10)) {
ndev->stats.rx_errors++;
if (desc_status & RD_RFS1)
ndev->stats.rx_crc_errors++;
if (desc_status & RD_RFS2)
ndev->stats.rx_frame_errors++;
if (desc_status & RD_RFS3)
ndev->stats.rx_length_errors++;
if (desc_status & RD_RFS4)
ndev->stats.rx_length_errors++;
if (desc_status & RD_RFS6)
ndev->stats.rx_missed_errors++;
if (desc_status & RD_RFS10)
ndev->stats.rx_over_errors++;
} else if (skb) {
dma_addr = le32_to_cpu(rxdesc->addr);
if (!mdp->cd->hw_swap)
sh_eth_soft_swap(
phys_to_virt(ALIGN(dma_addr, 4)),
pkt_len + 2);
mdp->rx_skbuff[entry] = NULL;
if (mdp->cd->rpadir)
skb_reserve(skb, NET_IP_ALIGN);
dma_unmap_single(&mdp->pdev->dev, dma_addr,
ALIGN(mdp->rx_buf_sz, 32),
DMA_FROM_DEVICE);
skb_put(skb, pkt_len);
skb->protocol = eth_type_trans(skb, ndev);
sh_eth: RX checksum offload support Add support for the RX checksum offload. This is enabled by default and may be disabled and re-enabled using 'ethtool': # ethtool -K eth0 rx off # ethtool -K eth0 rx on Some Ether MACs provide a simple checksumming scheme which appears to be completely compatible with CHECKSUM_COMPLETE: sum of all packet data after the L2 header is appended to packet data; this may be trivially read by the driver and used to update the skb accordingly. The same checksumming scheme is implemented in the EtherAVB MACs and now supported by the 'ravb' driver. In terms of performance, throughput is close to gigabit line rate with the RX checksum offload both enabled and disabled. The 'perf' output, however, appears to indicate that significantly less time is spent in do_csum() -- this is as expected. Test results with RX checksum offload enabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 933.93 [ perf record: Woken up 8 times to write data ] [ perf record: Captured and wrote 1.955 MB perf.data (41940 samples) ] ~/netperf-2.2pl4# perf report Samples: 41K of event 'cycles:ppp', Event count (approx.): 9915302763 Overhead Command Shared Object Symbol 9.44% netperf [kernel.kallsyms] [k] __arch_copy_to_user 7.75% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 6.31% swapper [kernel.kallsyms] [k] default_idle_call 5.89% swapper [kernel.kallsyms] [k] arch_cpu_idle 4.37% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 4.02% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.52% netperf [kernel.kallsyms] [k] preempt_count_sub 1.81% netperf [kernel.kallsyms] [k] tcp_recvmsg 1.80% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irqres 1.78% netperf [kernel.kallsyms] [k] preempt_count_add 1.36% netperf [kernel.kallsyms] [k] __tcp_transmit_skb 1.20% netperf [kernel.kallsyms] [k] __local_bh_enable_ip 1.10% netperf [kernel.kallsyms] [k] sh_eth_start_xmit Test results with RX checksum offload disabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 932.04 [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 3.642 MB perf.data (78817 samples) ] ~/netperf-2.2pl4# perf report Samples: 78K of event 'cycles:ppp', Event count (approx.): 18091442796 Overhead Command Shared Object Symbol 7.00% swapper [kernel.kallsyms] [k] do_csum 3.94% swapper [kernel.kallsyms] [k] sh_eth_poll 3.83% ksoftirqd/0 [kernel.kallsyms] [k] do_csum 3.23% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.87% netperf [kernel.kallsyms] [k] __arch_copy_to_user 2.86% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.13% swapper [kernel.kallsyms] [k] default_idle_call 2.12% ksoftirqd/0 [kernel.kallsyms] [k] sh_eth_poll 2.02% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.84% swapper [kernel.kallsyms] [k] __softirqentry_text_start 1.64% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 1.53% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 1.32% netperf [kernel.kallsyms] [k] preempt_count_sub 1.27% swapper [kernel.kallsyms] [k] __pi___inval_dcache_area 1.22% swapper [kernel.kallsyms] [k] check_preemption_disabled 1.01% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore The above results collected on the R-Car V3H Starter Kit board. Based on the commit 4d86d3818627 ("ravb: RX checksum offload")... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 11:06:52 -07:00
if (ndev->features & NETIF_F_RXCSUM)
sh_eth_rx_csum(skb);
netif_receive_skb(skb);
ndev->stats.rx_packets++;
ndev->stats.rx_bytes += pkt_len;
if (desc_status & RD_RFS8)
ndev->stats.multicast++;
}
entry = (++mdp->cur_rx) % mdp->num_rx_ring;
rxdesc = &mdp->rx_ring[entry];
}
/* Refill the Rx ring buffers. */
for (; mdp->cur_rx - mdp->dirty_rx > 0; mdp->dirty_rx++) {
entry = mdp->dirty_rx % mdp->num_rx_ring;
rxdesc = &mdp->rx_ring[entry];
/* The size of the buffer is 32 byte boundary. */
buf_len = ALIGN(mdp->rx_buf_sz, 32);
rxdesc->len = cpu_to_le32(buf_len << 16);
if (mdp->rx_skbuff[entry] == NULL) {
skb = netdev_alloc_skb(ndev, skbuff_size);
if (skb == NULL)
break; /* Better luck next round. */
sh_eth_set_receive_align(skb);
dma_addr = dma_map_single(&mdp->pdev->dev, skb->data,
buf_len, DMA_FROM_DEVICE);
if (dma_mapping_error(&mdp->pdev->dev, dma_addr)) {
kfree_skb(skb);
break;
}
mdp->rx_skbuff[entry] = skb;
skb_checksum_none_assert(skb);
rxdesc->addr = cpu_to_le32(dma_addr);
}
dma_wmb(); /* RACT bit must be set after all the above writes */
if (entry >= mdp->num_rx_ring - 1)
rxdesc->status |=
cpu_to_le32(RD_RACT | RD_RFP | RD_RDLE);
else
rxdesc->status |= cpu_to_le32(RD_RACT | RD_RFP);
}
/* Restart Rx engine if stopped. */
/* If we don't need to check status, don't. -KDU */
if (!(sh_eth_read(ndev, EDRRR) & EDRRR_R)) {
/* fix the values for the next receiving if RDE is set */
if (intr_status & EESR_RDE && !mdp->cd->no_xdfar) {
u32 count = (sh_eth_read(ndev, RDFAR) -
sh_eth_read(ndev, RDLAR)) >> 4;
mdp->cur_rx = count;
mdp->dirty_rx = count;
}
sh_eth_write(ndev, EDRRR_R, EDRRR);
}
*quota -= limit - boguscnt - 1;
return *quota <= 0;
}
static void sh_eth_rcv_snd_disable(struct net_device *ndev)
{
/* disable tx and rx */
sh_eth_modify(ndev, ECMR, ECMR_RE | ECMR_TE, 0);
}
static void sh_eth_rcv_snd_enable(struct net_device *ndev)
{
/* enable tx and rx */
sh_eth_modify(ndev, ECMR, ECMR_RE | ECMR_TE, ECMR_RE | ECMR_TE);
}
/* E-MAC interrupt handler */
static void sh_eth_emac_interrupt(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
u32 felic_stat;
u32 link_stat;
felic_stat = sh_eth_read(ndev, ECSR) & sh_eth_read(ndev, ECSIPR);
sh_eth_write(ndev, felic_stat, ECSR); /* clear int */
if (felic_stat & ECSR_ICD)
ndev->stats.tx_carrier_errors++;
if (felic_stat & ECSR_MPD)
pm_wakeup_event(&mdp->pdev->dev, 0);
if (felic_stat & ECSR_LCHNG) {
/* Link Changed */
if (mdp->cd->no_psr || mdp->no_ether_link)
return;
link_stat = sh_eth_read(ndev, PSR);
if (mdp->ether_link_active_low)
link_stat = ~link_stat;
if (!(link_stat & PHY_ST_LINK)) {
sh_eth_rcv_snd_disable(ndev);
} else {
/* Link Up */
sh_eth_modify(ndev, EESIPR, EESIPR_ECIIP, 0);
/* clear int */
sh_eth_modify(ndev, ECSR, 0, 0);
sh_eth_modify(ndev, EESIPR, EESIPR_ECIIP, EESIPR_ECIIP);
/* enable tx and rx */
sh_eth_rcv_snd_enable(ndev);
}
}
}
/* error control function */
static void sh_eth_error(struct net_device *ndev, u32 intr_status)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
u32 mask;
if (intr_status & EESR_TWB) {
/* Unused write back interrupt */
if (intr_status & EESR_TABT) { /* Transmit Abort int */
ndev->stats.tx_aborted_errors++;
netif_err(mdp, tx_err, ndev, "Transmit Abort\n");
}
}
if (intr_status & EESR_RABT) {
/* Receive Abort int */
if (intr_status & EESR_RFRMER) {
/* Receive Frame Overflow int */
ndev->stats.rx_frame_errors++;
}
}
if (intr_status & EESR_TDE) {
/* Transmit Descriptor Empty int */
ndev->stats.tx_fifo_errors++;
netif_err(mdp, tx_err, ndev, "Transmit Descriptor Empty\n");
}
if (intr_status & EESR_TFE) {
/* FIFO under flow */
ndev->stats.tx_fifo_errors++;
netif_err(mdp, tx_err, ndev, "Transmit FIFO Under flow\n");
}
if (intr_status & EESR_RDE) {
/* Receive Descriptor Empty int */
ndev->stats.rx_over_errors++;
}
if (intr_status & EESR_RFE) {
/* Receive FIFO Overflow int */
ndev->stats.rx_fifo_errors++;
}
if (!mdp->cd->no_ade && (intr_status & EESR_ADE)) {
/* Address Error */
ndev->stats.tx_fifo_errors++;
netif_err(mdp, tx_err, ndev, "Address Error\n");
}
mask = EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE;
if (mdp->cd->no_ade)
mask &= ~EESR_ADE;
if (intr_status & mask) {
/* Tx error */
u32 edtrr = sh_eth_read(ndev, EDTRR);
/* dmesg */
netdev_err(ndev, "TX error. status=%8.8x cur_tx=%8.8x dirty_tx=%8.8x state=%8.8x EDTRR=%8.8x.\n",
intr_status, mdp->cur_tx, mdp->dirty_tx,
(u32)ndev->state, edtrr);
/* dirty buffer free */
sh_eth_tx_free(ndev, true);
/* SH7712 BUG */
if (edtrr ^ mdp->cd->edtrr_trns) {
/* tx dma start */
sh_eth_write(ndev, mdp->cd->edtrr_trns, EDTRR);
}
/* wakeup */
netif_wake_queue(ndev);
}
}
static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
{
struct net_device *ndev = netdev;
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_cpu_data *cd = mdp->cd;
irqreturn_t ret = IRQ_NONE;
u32 intr_status, intr_enable;
spin_lock(&mdp->lock);
sh_eth: workaround for spurious ECI interrupt At least on Renesas R8A7778, EESR.ECI interrupt seems to fire regardless of its mask in EESIPR register. I can 100% reproduce it with the following scenario: target is booted with 'ip=on' option, and so IP-Config opens SoC Ether device but doesn't get a proper reply and then succeeds with on-board SMC chip; then I login and try to bring up the SoC Ether device with 'ifconfig', and I get an ECI interrupt once request_irq() is called by sh_eth_open() (while interrupt mask in EESIPR register is all 0), if that interrupt is accompanied by a pending EESR.FRC (frame receive completion) interrupt, I get kernel oops in sh_eth_rx() because sh_eth_ring_init() hasn't been called yet! The solution I worked out is the following: in sh_eth_interrupt(), mask the interrupt status from EESR register with the interrupt mask from EESIPR register in order not to handle the disabled interrupts -- but forcing EESIPR.M_ECI bit in this mask set because we always need to fully handle EESR.ECI interrupt in sh_eth_error() in order to quench it (as it doesn't get cleared by just writing 1 to the this bit as all the other interrupts). While at it, remove unneeded initializer for 'intr_status' variable and give it *unsigned long* type, matching the type of sh_eth_read()'s result; fix comment. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Max Filippov <max.filippov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-31 03:54:20 -06:00
/* Get interrupt status */
intr_status = sh_eth_read(ndev, EESR);
/* Mask it with the interrupt mask, forcing ECI interrupt to be always
* enabled since it's the one that comes thru regardless of the mask,
* and we need to fully handle it in sh_eth_emac_interrupt() in order
* to quench it as it doesn't get cleared by just writing 1 to the ECI
* bit...
sh_eth: workaround for spurious ECI interrupt At least on Renesas R8A7778, EESR.ECI interrupt seems to fire regardless of its mask in EESIPR register. I can 100% reproduce it with the following scenario: target is booted with 'ip=on' option, and so IP-Config opens SoC Ether device but doesn't get a proper reply and then succeeds with on-board SMC chip; then I login and try to bring up the SoC Ether device with 'ifconfig', and I get an ECI interrupt once request_irq() is called by sh_eth_open() (while interrupt mask in EESIPR register is all 0), if that interrupt is accompanied by a pending EESR.FRC (frame receive completion) interrupt, I get kernel oops in sh_eth_rx() because sh_eth_ring_init() hasn't been called yet! The solution I worked out is the following: in sh_eth_interrupt(), mask the interrupt status from EESR register with the interrupt mask from EESIPR register in order not to handle the disabled interrupts -- but forcing EESIPR.M_ECI bit in this mask set because we always need to fully handle EESR.ECI interrupt in sh_eth_error() in order to quench it (as it doesn't get cleared by just writing 1 to the this bit as all the other interrupts). While at it, remove unneeded initializer for 'intr_status' variable and give it *unsigned long* type, matching the type of sh_eth_read()'s result; fix comment. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Max Filippov <max.filippov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-31 03:54:20 -06:00
*/
intr_enable = sh_eth_read(ndev, EESIPR);
intr_status &= intr_enable | EESIPR_ECIIP;
if (intr_status & (EESR_RX_CHECK | cd->tx_check | EESR_ECI |
cd->eesr_err_check))
ret = IRQ_HANDLED;
else
goto out;
if (unlikely(!mdp->irq_enabled)) {
sh_eth_write(ndev, 0, EESIPR);
goto out;
}
if (intr_status & EESR_RX_CHECK) {
if (napi_schedule_prep(&mdp->napi)) {
/* Mask Rx interrupts */
sh_eth_write(ndev, intr_enable & ~EESR_RX_CHECK,
EESIPR);
__napi_schedule(&mdp->napi);
} else {
netdev_warn(ndev,
"ignoring interrupt, status 0x%08x, mask 0x%08x.\n",
intr_status, intr_enable);
}
}
/* Tx Check */
if (intr_status & cd->tx_check) {
/* Clear Tx interrupts */
sh_eth_write(ndev, intr_status & cd->tx_check, EESR);
sh_eth_tx_free(ndev, true);
netif_wake_queue(ndev);
}
/* E-MAC interrupt */
if (intr_status & EESR_ECI)
sh_eth_emac_interrupt(ndev);
if (intr_status & cd->eesr_err_check) {
/* Clear error interrupts */
sh_eth_write(ndev, intr_status & cd->eesr_err_check, EESR);
sh_eth_error(ndev, intr_status);
}
out:
spin_unlock(&mdp->lock);
return ret;
}
static int sh_eth_poll(struct napi_struct *napi, int budget)
{
struct sh_eth_private *mdp = container_of(napi, struct sh_eth_private,
napi);
struct net_device *ndev = napi->dev;
int quota = budget;
u32 intr_status;
for (;;) {
intr_status = sh_eth_read(ndev, EESR);
if (!(intr_status & EESR_RX_CHECK))
break;
/* Clear Rx interrupts */
sh_eth_write(ndev, intr_status & EESR_RX_CHECK, EESR);
if (sh_eth_rx(ndev, intr_status, &quota))
goto out;
}
napi_complete(napi);
/* Reenable Rx interrupts */
if (mdp->irq_enabled)
sh_eth_write(ndev, mdp->cd->eesipr_value, EESIPR);
out:
return budget - quota;
}
/* PHY state control function */
static void sh_eth_adjust_link(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
struct phy_device *phydev = ndev->phydev;
unsigned long flags;
int new_state = 0;
spin_lock_irqsave(&mdp->lock, flags);
/* Disable TX and RX right over here, if E-MAC change is ignored */
if (mdp->cd->no_psr || mdp->no_ether_link)
sh_eth_rcv_snd_disable(ndev);
if (phydev->link) {
if (phydev->duplex != mdp->duplex) {
new_state = 1;
mdp->duplex = phydev->duplex;
if (mdp->cd->set_duplex)
mdp->cd->set_duplex(ndev);
}
if (phydev->speed != mdp->speed) {
new_state = 1;
mdp->speed = phydev->speed;
if (mdp->cd->set_rate)
mdp->cd->set_rate(ndev);
}
if (!mdp->link) {
sh_eth_modify(ndev, ECMR, ECMR_TXF, 0);
new_state = 1;
mdp->link = phydev->link;
}
} else if (mdp->link) {
new_state = 1;
mdp->link = 0;
mdp->speed = 0;
mdp->duplex = -1;
}
/* Enable TX and RX right over here, if E-MAC change is ignored */
if ((mdp->cd->no_psr || mdp->no_ether_link) && phydev->link)
sh_eth_rcv_snd_enable(ndev);
spin_unlock_irqrestore(&mdp->lock, flags);
if (new_state && netif_msg_link(mdp))
phy_print_status(phydev);
}
/* PHY init function */
static int sh_eth_phy_init(struct net_device *ndev)
{
struct device_node *np = ndev->dev.parent->of_node;
struct sh_eth_private *mdp = netdev_priv(ndev);
struct phy_device *phydev;
mdp->link = 0;
mdp->speed = 0;
mdp->duplex = -1;
/* Try connect to PHY */
if (np) {
struct device_node *pn;
pn = of_parse_phandle(np, "phy-handle", 0);
phydev = of_phy_connect(ndev, pn,
sh_eth_adjust_link, 0,
mdp->phy_interface);
of_node_put(pn);
if (!phydev)
phydev = ERR_PTR(-ENOENT);
} else {
char phy_id[MII_BUS_ID_SIZE + 3];
snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
mdp->mii_bus->id, mdp->phy_id);
phydev = phy_connect(ndev, phy_id, sh_eth_adjust_link,
mdp->phy_interface);
}
if (IS_ERR(phydev)) {
netdev_err(ndev, "failed to connect PHY\n");
return PTR_ERR(phydev);
}
/* mask with MAC supported features */
if (mdp->cd->register_type != SH_ETH_REG_GIGABIT) {
int err = phy_set_max_speed(phydev, SPEED_100);
if (err) {
netdev_err(ndev, "failed to limit PHY to 100 Mbit/s\n");
phy_disconnect(phydev);
return err;
}
}
phy_attached_info(phydev);
return 0;
}
/* PHY control start function */
static int sh_eth_phy_start(struct net_device *ndev)
{
int ret;
ret = sh_eth_phy_init(ndev);
if (ret)
return ret;
phy_start(ndev->phydev);
return 0;
}
/* If it is ever necessary to increase SH_ETH_REG_DUMP_MAX_REGS, the
* version must be bumped as well. Just adding registers up to that
* limit is fine, as long as the existing register indices don't
* change.
*/
#define SH_ETH_REG_DUMP_VERSION 1
#define SH_ETH_REG_DUMP_MAX_REGS 256
static size_t __sh_eth_get_regs(struct net_device *ndev, u32 *buf)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_cpu_data *cd = mdp->cd;
u32 *valid_map;
size_t len;
BUILD_BUG_ON(SH_ETH_MAX_REGISTER_OFFSET > SH_ETH_REG_DUMP_MAX_REGS);
/* Dump starts with a bitmap that tells ethtool which
* registers are defined for this chip.
*/
len = DIV_ROUND_UP(SH_ETH_REG_DUMP_MAX_REGS, 32);
if (buf) {
valid_map = buf;
buf += len;
} else {
valid_map = NULL;
}
/* Add a register to the dump, if it has a defined offset.
* This automatically skips most undefined registers, but for
* some it is also necessary to check a capability flag in
* struct sh_eth_cpu_data.
*/
#define mark_reg_valid(reg) valid_map[reg / 32] |= 1U << (reg % 32)
#define add_reg_from(reg, read_expr) do { \
if (mdp->reg_offset[reg] != SH_ETH_OFFSET_INVALID) { \
if (buf) { \
mark_reg_valid(reg); \
*buf++ = read_expr; \
} \
++len; \
} \
} while (0)
#define add_reg(reg) add_reg_from(reg, sh_eth_read(ndev, reg))
#define add_tsu_reg(reg) add_reg_from(reg, sh_eth_tsu_read(mdp, reg))
add_reg(EDSR);
add_reg(EDMR);
add_reg(EDTRR);
add_reg(EDRRR);
add_reg(EESR);
add_reg(EESIPR);
add_reg(TDLAR);
add_reg(TDFAR);
add_reg(TDFXR);
add_reg(TDFFR);
add_reg(RDLAR);
add_reg(RDFAR);
add_reg(RDFXR);
add_reg(RDFFR);
add_reg(TRSCER);
add_reg(RMFCR);
add_reg(TFTR);
add_reg(FDR);
add_reg(RMCR);
add_reg(TFUCR);
add_reg(RFOCR);
if (cd->rmiimode)
add_reg(RMIIMODE);
add_reg(FCFTR);
if (cd->rpadir)
add_reg(RPADIR);
if (!cd->no_trimd)
add_reg(TRIMD);
add_reg(ECMR);
add_reg(ECSR);
add_reg(ECSIPR);
add_reg(PIR);
if (!cd->no_psr)
add_reg(PSR);
add_reg(RDMLR);
add_reg(RFLR);
add_reg(IPGR);
if (cd->apr)
add_reg(APR);
if (cd->mpr)
add_reg(MPR);
add_reg(RFCR);
add_reg(RFCF);
if (cd->tpauser)
add_reg(TPAUSER);
add_reg(TPAUSECR);
add_reg(GECMR);
if (cd->bculr)
add_reg(BCULR);
add_reg(MAHR);
add_reg(MALR);
add_reg(TROCR);
add_reg(CDCR);
add_reg(LCCR);
add_reg(CNDCR);
add_reg(CEFCR);
add_reg(FRECR);
add_reg(TSFRCR);
add_reg(TLFRCR);
add_reg(CERCR);
add_reg(CEECR);
add_reg(MAFCR);
if (cd->rtrate)
add_reg(RTRATE);
if (cd->csmr)
add_reg(CSMR);
if (cd->select_mii)
add_reg(RMII_MII);
if (cd->tsu) {
add_tsu_reg(ARSTR);
add_tsu_reg(TSU_CTRST);
if (cd->dual_port) {
add_tsu_reg(TSU_FWEN0);
add_tsu_reg(TSU_FWEN1);
add_tsu_reg(TSU_FCM);
add_tsu_reg(TSU_BSYSL0);
add_tsu_reg(TSU_BSYSL1);
add_tsu_reg(TSU_PRISL0);
add_tsu_reg(TSU_PRISL1);
add_tsu_reg(TSU_FWSL0);
add_tsu_reg(TSU_FWSL1);
}
add_tsu_reg(TSU_FWSLC);
if (cd->dual_port) {
add_tsu_reg(TSU_QTAGM0);
add_tsu_reg(TSU_QTAGM1);
add_tsu_reg(TSU_FWSR);
add_tsu_reg(TSU_FWINMK);
add_tsu_reg(TSU_ADQT0);
add_tsu_reg(TSU_ADQT1);
add_tsu_reg(TSU_VTAG0);
add_tsu_reg(TSU_VTAG1);
}
add_tsu_reg(TSU_ADSBSY);
add_tsu_reg(TSU_TEN);
add_tsu_reg(TSU_POST1);
add_tsu_reg(TSU_POST2);
add_tsu_reg(TSU_POST3);
add_tsu_reg(TSU_POST4);
/* This is the start of a table, not just a single register. */
if (buf) {
unsigned int i;
mark_reg_valid(TSU_ADRH0);
for (i = 0; i < SH_ETH_TSU_CAM_ENTRIES * 2; i++)
*buf++ = ioread32(mdp->tsu_addr +
mdp->reg_offset[TSU_ADRH0] +
i * 4);
}
len += SH_ETH_TSU_CAM_ENTRIES * 2;
}
#undef mark_reg_valid
#undef add_reg_from
#undef add_reg
#undef add_tsu_reg
return len * 4;
}
static int sh_eth_get_regs_len(struct net_device *ndev)
{
return __sh_eth_get_regs(ndev, NULL);
}
static void sh_eth_get_regs(struct net_device *ndev, struct ethtool_regs *regs,
void *buf)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
regs->version = SH_ETH_REG_DUMP_VERSION;
pm_runtime_get_sync(&mdp->pdev->dev);
__sh_eth_get_regs(ndev, buf);
pm_runtime_put_sync(&mdp->pdev->dev);
}
static u32 sh_eth_get_msglevel(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
return mdp->msg_enable;
}
static void sh_eth_set_msglevel(struct net_device *ndev, u32 value)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
mdp->msg_enable = value;
}
static const char sh_eth_gstrings_stats[][ETH_GSTRING_LEN] = {
"rx_current", "tx_current",
"rx_dirty", "tx_dirty",
};
#define SH_ETH_STATS_LEN ARRAY_SIZE(sh_eth_gstrings_stats)
static int sh_eth_get_sset_count(struct net_device *netdev, int sset)
{
switch (sset) {
case ETH_SS_STATS:
return SH_ETH_STATS_LEN;
default:
return -EOPNOTSUPP;
}
}
static void sh_eth_get_ethtool_stats(struct net_device *ndev,
struct ethtool_stats *stats, u64 *data)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int i = 0;
/* device-specific stats */
data[i++] = mdp->cur_rx;
data[i++] = mdp->cur_tx;
data[i++] = mdp->dirty_rx;
data[i++] = mdp->dirty_tx;
}
static void sh_eth_get_strings(struct net_device *ndev, u32 stringset, u8 *data)
{
switch (stringset) {
case ETH_SS_STATS:
memcpy(data, *sh_eth_gstrings_stats,
sizeof(sh_eth_gstrings_stats));
break;
}
}
static void sh_eth_get_ringparam(struct net_device *ndev,
struct ethtool_ringparam *ring)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
ring->rx_max_pending = RX_RING_MAX;
ring->tx_max_pending = TX_RING_MAX;
ring->rx_pending = mdp->num_rx_ring;
ring->tx_pending = mdp->num_tx_ring;
}
static int sh_eth_set_ringparam(struct net_device *ndev,
struct ethtool_ringparam *ring)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int ret;
if (ring->tx_pending > TX_RING_MAX ||
ring->rx_pending > RX_RING_MAX ||
ring->tx_pending < TX_RING_MIN ||
ring->rx_pending < RX_RING_MIN)
return -EINVAL;
if (ring->rx_mini_pending || ring->rx_jumbo_pending)
return -EINVAL;
if (netif_running(ndev)) {
netif_device_detach(ndev);
netif_tx_disable(ndev);
/* Serialise with the interrupt handler and NAPI, then
* disable interrupts. We have to clear the
* irq_enabled flag first to ensure that interrupts
* won't be re-enabled.
*/
mdp->irq_enabled = false;
synchronize_irq(ndev->irq);
napi_synchronize(&mdp->napi);
sh_eth_write(ndev, 0x0000, EESIPR);
sh_eth: Ensure DMA engines are stopped before freeing buffers Currently we try to clear EDRRR and EDTRR and immediately continue to free buffers. This is unsafe because: - In general, register writes are not serialised with DMA, so we still have to wait for DMA to complete somehow - The R8A7790 (R-Car H2) manual states that the TX running flag cannot be cleared by writing to EDTRR - The same manual states that clearing the RX running flag only stops RX DMA at the next packet boundary I applied this patch to the driver to detect DMA writes to freed buffers: > --- a/drivers/net/ethernet/renesas/sh_eth.c > +++ b/drivers/net/ethernet/renesas/sh_eth.c > @@ -1098,7 +1098,14 @@ static void sh_eth_ring_free(struct net_device *ndev) > /* Free Rx skb ringbuffer */ > if (mdp->rx_skbuff) { > for (i = 0; i < mdp->num_rx_ring; i++) > + memcpy(mdp->rx_skbuff[i]->data, > + "Hello, world", 12); > + msleep(100); > + for (i = 0; i < mdp->num_rx_ring; i++) { > + WARN_ON(memcmp(mdp->rx_skbuff[i]->data, > + "Hello, world", 12)); > dev_kfree_skb(mdp->rx_skbuff[i]); > + } > } > kfree(mdp->rx_skbuff); > mdp->rx_skbuff = NULL; then ran the loop: while ethtool -G eth0 rx 128 ; ethtool -G eth0 rx 64; do echo -n .; done and 'ping -f' toward the sh_eth port from another machine. The warning fired several times a minute. To fix these issues: - Deactivate all TX descriptors rather than writing to EDTRR - As there seems to be no way of telling when RX DMA is stopped, perform a soft reset to ensure that both DMA enginess are stopped - To reduce the possibility of the reset truncating a transmitted frame, disable egress and wait a reasonable time to reach a packet boundary before resetting - Update statistics before resetting (The 'reasonable time' does not allow for CS/CD in half-duplex mode, but half-duplex no longer seems reasonable!) Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 17:49:32 -07:00
sh_eth_dev_exit(ndev);
/* Free all the skbuffs in the Rx queue and the DMA buffers. */
sh_eth_ring_free(ndev);
}
/* Set new parameters */
mdp->num_rx_ring = ring->rx_pending;
mdp->num_tx_ring = ring->tx_pending;
if (netif_running(ndev)) {
ret = sh_eth_ring_init(ndev);
if (ret < 0) {
netdev_err(ndev, "%s: sh_eth_ring_init failed.\n",
__func__);
return ret;
}
ret = sh_eth_dev_init(ndev);
if (ret < 0) {
netdev_err(ndev, "%s: sh_eth_dev_init failed.\n",
__func__);
return ret;
}
netif_device_attach(ndev);
}
return 0;
}
static void sh_eth_get_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
wol->supported = 0;
wol->wolopts = 0;
if (mdp->cd->magic) {
wol->supported = WAKE_MAGIC;
wol->wolopts = mdp->wol_enabled ? WAKE_MAGIC : 0;
}
}
static int sh_eth_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
if (!mdp->cd->magic || wol->wolopts & ~WAKE_MAGIC)
return -EOPNOTSUPP;
mdp->wol_enabled = !!(wol->wolopts & WAKE_MAGIC);
device_set_wakeup_enable(&mdp->pdev->dev, mdp->wol_enabled);
return 0;
}
static const struct ethtool_ops sh_eth_ethtool_ops = {
.get_regs_len = sh_eth_get_regs_len,
.get_regs = sh_eth_get_regs,
.nway_reset = phy_ethtool_nway_reset,
.get_msglevel = sh_eth_get_msglevel,
.set_msglevel = sh_eth_set_msglevel,
.get_link = ethtool_op_get_link,
.get_strings = sh_eth_get_strings,
.get_ethtool_stats = sh_eth_get_ethtool_stats,
.get_sset_count = sh_eth_get_sset_count,
.get_ringparam = sh_eth_get_ringparam,
.set_ringparam = sh_eth_set_ringparam,
.get_link_ksettings = phy_ethtool_get_link_ksettings,
.set_link_ksettings = phy_ethtool_set_link_ksettings,
.get_wol = sh_eth_get_wol,
.set_wol = sh_eth_set_wol,
};
/* network device open function */
static int sh_eth_open(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int ret;
pm_runtime_get_sync(&mdp->pdev->dev);
napi_enable(&mdp->napi);
ret = request_irq(ndev->irq, sh_eth_interrupt,
mdp->cd->irq_flags, ndev->name, ndev);
if (ret) {
netdev_err(ndev, "Can not assign IRQ number\n");
goto out_napi_off;
}
/* Descriptor set */
ret = sh_eth_ring_init(ndev);
if (ret)
goto out_free_irq;
/* device init */
ret = sh_eth_dev_init(ndev);
if (ret)
goto out_free_irq;
/* PHY control start*/
ret = sh_eth_phy_start(ndev);
if (ret)
goto out_free_irq;
netif_start_queue(ndev);
sh_eth: Fix sleeping function called from invalid context This resolves the following bug which can be reproduced by building the kernel with CONFIG_DEBUG_ATOMIC_SLEEP=y and reading network statistics while the network interface is down. e.g.: ifconfig eth0 down cat /sys/class/net/eth0/statistics/tx_errors ---- [ 1238.161349] BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:952 [ 1238.188279] in_atomic(): 1, irqs_disabled(): 0, pid: 1388, name: cat [ 1238.207425] CPU: 0 PID: 1388 Comm: cat Not tainted 3.10.31-ltsi-00046-gefa0b46 #1087 [ 1238.230737] Backtrace: [ 1238.238123] [<c0012e64>] (dump_backtrace+0x0/0x10c) from [<c0013000>] (show_stack+0x18/0x1c) [ 1238.263499] r6:000003b8 r5:c06160c0 r4:c0669e00 r3:00404000 [ 1238.280583] [<c0012fe8>] (show_stack+0x0/0x1c) from [<c04515a4>] (dump_stack+0x20/0x28) [ 1238.304631] [<c0451584>] (dump_stack+0x0/0x28) from [<c004970c>] (__might_sleep+0xf8/0x118) [ 1238.329734] [<c0049614>] (__might_sleep+0x0/0x118) from [<c02465ac>] (__pm_runtime_resume+0x38/0x90) [ 1238.357170] r7:d616f000 r6:c049c458 r5:00000004 r4:d6a17210 [ 1238.374251] [<c0246574>] (__pm_runtime_resume+0x0/0x90) from [<c029b1c4>] (sh_eth_get_stats+0x44/0x280) [ 1238.402468] r7:d616f000 r6:c049c458 r5:d5c21000 r4:d5c21000 [ 1238.419552] [<c029b180>] (sh_eth_get_stats+0x0/0x280) from [<c03ae39c>] (dev_get_stats+0x54/0x88) [ 1238.446204] r5:d5c21000 r4:d5ed7e08 [ 1238.456980] [<c03ae348>] (dev_get_stats+0x0/0x88) from [<c03c677c>] (netstat_show.isra.15+0x54/0x9c) [ 1238.484413] r6:d5c21000 r5:d5c21238 r4:00000028 r3:00000001 [ 1238.501495] [<c03c6728>] (netstat_show.isra.15+0x0/0x9c) from [<c03c69b8>] (show_tx_errors+0x18/0x1c) [ 1238.529196] r7:d5f945d8 r6:d5f945c0 r5:c049716c r4:c0650e7c [ 1238.546279] [<c03c69a0>] (show_tx_errors+0x0/0x1c) from [<c023963c>] (dev_attr_show+0x24/0x50) [ 1238.572157] [<c0239618>] (dev_attr_show+0x0/0x50) from [<c010c148>] (sysfs_read_file+0xb0/0x140) [ 1238.598554] r5:c049716c r4:d5c21240 [ 1238.609326] [<c010c098>] (sysfs_read_file+0x0/0x140) from [<c00b9ee4>] (vfs_read+0xb0/0x13c) [ 1238.634679] [<c00b9e34>] (vfs_read+0x0/0x13c) from [<c00ba0ac>] (SyS_read+0x44/0x74) [ 1238.657944] r8:bef45bf0 r7:00000000 r6:d6ac0600 r5:00000000 r4:00000000 [ 1238.678172] [<c00ba068>] (SyS_read+0x0/0x74) from [<c000eec0>] (ret_fast_syscall+0x0/0x30) ---- Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-27 18:04:15 -07:00
mdp->is_opened = 1;
return ret;
out_free_irq:
free_irq(ndev->irq, ndev);
out_napi_off:
napi_disable(&mdp->napi);
pm_runtime_put_sync(&mdp->pdev->dev);
return ret;
}
/* Timeout function */
static void sh_eth_tx_timeout(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_rxdesc *rxdesc;
int i;
netif_stop_queue(ndev);
netif_err(mdp, timer, ndev,
"transmit timed out, status %8.8x, resetting...\n",
sh_eth_read(ndev, EESR));
/* tx_errors count up */
ndev->stats.tx_errors++;
/* Free all the skbuffs in the Rx queue. */
for (i = 0; i < mdp->num_rx_ring; i++) {
rxdesc = &mdp->rx_ring[i];
rxdesc->status = cpu_to_le32(0);
rxdesc->addr = cpu_to_le32(0xBADF00D0);
dev_kfree_skb(mdp->rx_skbuff[i]);
mdp->rx_skbuff[i] = NULL;
}
for (i = 0; i < mdp->num_tx_ring; i++) {
dev_kfree_skb(mdp->tx_skbuff[i]);
mdp->tx_skbuff[i] = NULL;
}
/* device init */
sh_eth_dev_init(ndev);
netif_start_queue(ndev);
}
/* Packet transmit function */
static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_txdesc *txdesc;
dma_addr_t dma_addr;
u32 entry;
unsigned long flags;
spin_lock_irqsave(&mdp->lock, flags);
if ((mdp->cur_tx - mdp->dirty_tx) >= (mdp->num_tx_ring - 4)) {
if (!sh_eth_tx_free(ndev, true)) {
netif_warn(mdp, tx_queued, ndev, "TxFD exhausted.\n");
netif_stop_queue(ndev);
spin_unlock_irqrestore(&mdp->lock, flags);
return NETDEV_TX_BUSY;
}
}
spin_unlock_irqrestore(&mdp->lock, flags);
if (skb_put_padto(skb, ETH_ZLEN))
return NETDEV_TX_OK;
entry = mdp->cur_tx % mdp->num_tx_ring;
mdp->tx_skbuff[entry] = skb;
txdesc = &mdp->tx_ring[entry];
/* soft swap. */
if (!mdp->cd->hw_swap)
sh_eth_soft_swap(PTR_ALIGN(skb->data, 4), skb->len + 2);
dma_addr = dma_map_single(&mdp->pdev->dev, skb->data, skb->len,
DMA_TO_DEVICE);
if (dma_mapping_error(&mdp->pdev->dev, dma_addr)) {
kfree_skb(skb);
return NETDEV_TX_OK;
}
txdesc->addr = cpu_to_le32(dma_addr);
txdesc->len = cpu_to_le32(skb->len << 16);
dma_wmb(); /* TACT bit must be set after all the above writes */
if (entry >= mdp->num_tx_ring - 1)
txdesc->status |= cpu_to_le32(TD_TACT | TD_TDLE);
else
txdesc->status |= cpu_to_le32(TD_TACT);
mdp->cur_tx++;
if (!(sh_eth_read(ndev, EDTRR) & mdp->cd->edtrr_trns))
sh_eth_write(ndev, mdp->cd->edtrr_trns, EDTRR);
return NETDEV_TX_OK;
}
/* The statistics registers have write-clear behaviour, which means we
* will lose any increment between the read and write. We mitigate
* this by only clearing when we read a non-zero value, so we will
* never falsely report a total of zero.
*/
static void
sh_eth_update_stat(struct net_device *ndev, unsigned long *stat, int reg)
{
u32 delta = sh_eth_read(ndev, reg);
if (delta) {
*stat += delta;
sh_eth_write(ndev, 0, reg);
}
}
sh_eth: Fix sleeping function called from invalid context This resolves the following bug which can be reproduced by building the kernel with CONFIG_DEBUG_ATOMIC_SLEEP=y and reading network statistics while the network interface is down. e.g.: ifconfig eth0 down cat /sys/class/net/eth0/statistics/tx_errors ---- [ 1238.161349] BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:952 [ 1238.188279] in_atomic(): 1, irqs_disabled(): 0, pid: 1388, name: cat [ 1238.207425] CPU: 0 PID: 1388 Comm: cat Not tainted 3.10.31-ltsi-00046-gefa0b46 #1087 [ 1238.230737] Backtrace: [ 1238.238123] [<c0012e64>] (dump_backtrace+0x0/0x10c) from [<c0013000>] (show_stack+0x18/0x1c) [ 1238.263499] r6:000003b8 r5:c06160c0 r4:c0669e00 r3:00404000 [ 1238.280583] [<c0012fe8>] (show_stack+0x0/0x1c) from [<c04515a4>] (dump_stack+0x20/0x28) [ 1238.304631] [<c0451584>] (dump_stack+0x0/0x28) from [<c004970c>] (__might_sleep+0xf8/0x118) [ 1238.329734] [<c0049614>] (__might_sleep+0x0/0x118) from [<c02465ac>] (__pm_runtime_resume+0x38/0x90) [ 1238.357170] r7:d616f000 r6:c049c458 r5:00000004 r4:d6a17210 [ 1238.374251] [<c0246574>] (__pm_runtime_resume+0x0/0x90) from [<c029b1c4>] (sh_eth_get_stats+0x44/0x280) [ 1238.402468] r7:d616f000 r6:c049c458 r5:d5c21000 r4:d5c21000 [ 1238.419552] [<c029b180>] (sh_eth_get_stats+0x0/0x280) from [<c03ae39c>] (dev_get_stats+0x54/0x88) [ 1238.446204] r5:d5c21000 r4:d5ed7e08 [ 1238.456980] [<c03ae348>] (dev_get_stats+0x0/0x88) from [<c03c677c>] (netstat_show.isra.15+0x54/0x9c) [ 1238.484413] r6:d5c21000 r5:d5c21238 r4:00000028 r3:00000001 [ 1238.501495] [<c03c6728>] (netstat_show.isra.15+0x0/0x9c) from [<c03c69b8>] (show_tx_errors+0x18/0x1c) [ 1238.529196] r7:d5f945d8 r6:d5f945c0 r5:c049716c r4:c0650e7c [ 1238.546279] [<c03c69a0>] (show_tx_errors+0x0/0x1c) from [<c023963c>] (dev_attr_show+0x24/0x50) [ 1238.572157] [<c0239618>] (dev_attr_show+0x0/0x50) from [<c010c148>] (sysfs_read_file+0xb0/0x140) [ 1238.598554] r5:c049716c r4:d5c21240 [ 1238.609326] [<c010c098>] (sysfs_read_file+0x0/0x140) from [<c00b9ee4>] (vfs_read+0xb0/0x13c) [ 1238.634679] [<c00b9e34>] (vfs_read+0x0/0x13c) from [<c00ba0ac>] (SyS_read+0x44/0x74) [ 1238.657944] r8:bef45bf0 r7:00000000 r6:d6ac0600 r5:00000000 r4:00000000 [ 1238.678172] [<c00ba068>] (SyS_read+0x0/0x74) from [<c000eec0>] (ret_fast_syscall+0x0/0x30) ---- Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-27 18:04:15 -07:00
static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
if (mdp->cd->no_tx_cntrs)
sh_eth: Fix sleeping function called from invalid context This resolves the following bug which can be reproduced by building the kernel with CONFIG_DEBUG_ATOMIC_SLEEP=y and reading network statistics while the network interface is down. e.g.: ifconfig eth0 down cat /sys/class/net/eth0/statistics/tx_errors ---- [ 1238.161349] BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:952 [ 1238.188279] in_atomic(): 1, irqs_disabled(): 0, pid: 1388, name: cat [ 1238.207425] CPU: 0 PID: 1388 Comm: cat Not tainted 3.10.31-ltsi-00046-gefa0b46 #1087 [ 1238.230737] Backtrace: [ 1238.238123] [<c0012e64>] (dump_backtrace+0x0/0x10c) from [<c0013000>] (show_stack+0x18/0x1c) [ 1238.263499] r6:000003b8 r5:c06160c0 r4:c0669e00 r3:00404000 [ 1238.280583] [<c0012fe8>] (show_stack+0x0/0x1c) from [<c04515a4>] (dump_stack+0x20/0x28) [ 1238.304631] [<c0451584>] (dump_stack+0x0/0x28) from [<c004970c>] (__might_sleep+0xf8/0x118) [ 1238.329734] [<c0049614>] (__might_sleep+0x0/0x118) from [<c02465ac>] (__pm_runtime_resume+0x38/0x90) [ 1238.357170] r7:d616f000 r6:c049c458 r5:00000004 r4:d6a17210 [ 1238.374251] [<c0246574>] (__pm_runtime_resume+0x0/0x90) from [<c029b1c4>] (sh_eth_get_stats+0x44/0x280) [ 1238.402468] r7:d616f000 r6:c049c458 r5:d5c21000 r4:d5c21000 [ 1238.419552] [<c029b180>] (sh_eth_get_stats+0x0/0x280) from [<c03ae39c>] (dev_get_stats+0x54/0x88) [ 1238.446204] r5:d5c21000 r4:d5ed7e08 [ 1238.456980] [<c03ae348>] (dev_get_stats+0x0/0x88) from [<c03c677c>] (netstat_show.isra.15+0x54/0x9c) [ 1238.484413] r6:d5c21000 r5:d5c21238 r4:00000028 r3:00000001 [ 1238.501495] [<c03c6728>] (netstat_show.isra.15+0x0/0x9c) from [<c03c69b8>] (show_tx_errors+0x18/0x1c) [ 1238.529196] r7:d5f945d8 r6:d5f945c0 r5:c049716c r4:c0650e7c [ 1238.546279] [<c03c69a0>] (show_tx_errors+0x0/0x1c) from [<c023963c>] (dev_attr_show+0x24/0x50) [ 1238.572157] [<c0239618>] (dev_attr_show+0x0/0x50) from [<c010c148>] (sysfs_read_file+0xb0/0x140) [ 1238.598554] r5:c049716c r4:d5c21240 [ 1238.609326] [<c010c098>] (sysfs_read_file+0x0/0x140) from [<c00b9ee4>] (vfs_read+0xb0/0x13c) [ 1238.634679] [<c00b9e34>] (vfs_read+0x0/0x13c) from [<c00ba0ac>] (SyS_read+0x44/0x74) [ 1238.657944] r8:bef45bf0 r7:00000000 r6:d6ac0600 r5:00000000 r4:00000000 [ 1238.678172] [<c00ba068>] (SyS_read+0x0/0x74) from [<c000eec0>] (ret_fast_syscall+0x0/0x30) ---- Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-27 18:04:15 -07:00
return &ndev->stats;
if (!mdp->is_opened)
return &ndev->stats;
sh_eth_update_stat(ndev, &ndev->stats.tx_dropped, TROCR);
sh_eth_update_stat(ndev, &ndev->stats.collisions, CDCR);
sh_eth_update_stat(ndev, &ndev->stats.tx_carrier_errors, LCCR);
sh_eth: Fix sleeping function called from invalid context This resolves the following bug which can be reproduced by building the kernel with CONFIG_DEBUG_ATOMIC_SLEEP=y and reading network statistics while the network interface is down. e.g.: ifconfig eth0 down cat /sys/class/net/eth0/statistics/tx_errors ---- [ 1238.161349] BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:952 [ 1238.188279] in_atomic(): 1, irqs_disabled(): 0, pid: 1388, name: cat [ 1238.207425] CPU: 0 PID: 1388 Comm: cat Not tainted 3.10.31-ltsi-00046-gefa0b46 #1087 [ 1238.230737] Backtrace: [ 1238.238123] [<c0012e64>] (dump_backtrace+0x0/0x10c) from [<c0013000>] (show_stack+0x18/0x1c) [ 1238.263499] r6:000003b8 r5:c06160c0 r4:c0669e00 r3:00404000 [ 1238.280583] [<c0012fe8>] (show_stack+0x0/0x1c) from [<c04515a4>] (dump_stack+0x20/0x28) [ 1238.304631] [<c0451584>] (dump_stack+0x0/0x28) from [<c004970c>] (__might_sleep+0xf8/0x118) [ 1238.329734] [<c0049614>] (__might_sleep+0x0/0x118) from [<c02465ac>] (__pm_runtime_resume+0x38/0x90) [ 1238.357170] r7:d616f000 r6:c049c458 r5:00000004 r4:d6a17210 [ 1238.374251] [<c0246574>] (__pm_runtime_resume+0x0/0x90) from [<c029b1c4>] (sh_eth_get_stats+0x44/0x280) [ 1238.402468] r7:d616f000 r6:c049c458 r5:d5c21000 r4:d5c21000 [ 1238.419552] [<c029b180>] (sh_eth_get_stats+0x0/0x280) from [<c03ae39c>] (dev_get_stats+0x54/0x88) [ 1238.446204] r5:d5c21000 r4:d5ed7e08 [ 1238.456980] [<c03ae348>] (dev_get_stats+0x0/0x88) from [<c03c677c>] (netstat_show.isra.15+0x54/0x9c) [ 1238.484413] r6:d5c21000 r5:d5c21238 r4:00000028 r3:00000001 [ 1238.501495] [<c03c6728>] (netstat_show.isra.15+0x0/0x9c) from [<c03c69b8>] (show_tx_errors+0x18/0x1c) [ 1238.529196] r7:d5f945d8 r6:d5f945c0 r5:c049716c r4:c0650e7c [ 1238.546279] [<c03c69a0>] (show_tx_errors+0x0/0x1c) from [<c023963c>] (dev_attr_show+0x24/0x50) [ 1238.572157] [<c0239618>] (dev_attr_show+0x0/0x50) from [<c010c148>] (sysfs_read_file+0xb0/0x140) [ 1238.598554] r5:c049716c r4:d5c21240 [ 1238.609326] [<c010c098>] (sysfs_read_file+0x0/0x140) from [<c00b9ee4>] (vfs_read+0xb0/0x13c) [ 1238.634679] [<c00b9e34>] (vfs_read+0x0/0x13c) from [<c00ba0ac>] (SyS_read+0x44/0x74) [ 1238.657944] r8:bef45bf0 r7:00000000 r6:d6ac0600 r5:00000000 r4:00000000 [ 1238.678172] [<c00ba068>] (SyS_read+0x0/0x74) from [<c000eec0>] (ret_fast_syscall+0x0/0x30) ---- Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-27 18:04:15 -07:00
if (mdp->cd->cexcr) {
sh_eth_update_stat(ndev, &ndev->stats.tx_carrier_errors,
CERCR);
sh_eth_update_stat(ndev, &ndev->stats.tx_carrier_errors,
CEECR);
sh_eth: Fix sleeping function called from invalid context This resolves the following bug which can be reproduced by building the kernel with CONFIG_DEBUG_ATOMIC_SLEEP=y and reading network statistics while the network interface is down. e.g.: ifconfig eth0 down cat /sys/class/net/eth0/statistics/tx_errors ---- [ 1238.161349] BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:952 [ 1238.188279] in_atomic(): 1, irqs_disabled(): 0, pid: 1388, name: cat [ 1238.207425] CPU: 0 PID: 1388 Comm: cat Not tainted 3.10.31-ltsi-00046-gefa0b46 #1087 [ 1238.230737] Backtrace: [ 1238.238123] [<c0012e64>] (dump_backtrace+0x0/0x10c) from [<c0013000>] (show_stack+0x18/0x1c) [ 1238.263499] r6:000003b8 r5:c06160c0 r4:c0669e00 r3:00404000 [ 1238.280583] [<c0012fe8>] (show_stack+0x0/0x1c) from [<c04515a4>] (dump_stack+0x20/0x28) [ 1238.304631] [<c0451584>] (dump_stack+0x0/0x28) from [<c004970c>] (__might_sleep+0xf8/0x118) [ 1238.329734] [<c0049614>] (__might_sleep+0x0/0x118) from [<c02465ac>] (__pm_runtime_resume+0x38/0x90) [ 1238.357170] r7:d616f000 r6:c049c458 r5:00000004 r4:d6a17210 [ 1238.374251] [<c0246574>] (__pm_runtime_resume+0x0/0x90) from [<c029b1c4>] (sh_eth_get_stats+0x44/0x280) [ 1238.402468] r7:d616f000 r6:c049c458 r5:d5c21000 r4:d5c21000 [ 1238.419552] [<c029b180>] (sh_eth_get_stats+0x0/0x280) from [<c03ae39c>] (dev_get_stats+0x54/0x88) [ 1238.446204] r5:d5c21000 r4:d5ed7e08 [ 1238.456980] [<c03ae348>] (dev_get_stats+0x0/0x88) from [<c03c677c>] (netstat_show.isra.15+0x54/0x9c) [ 1238.484413] r6:d5c21000 r5:d5c21238 r4:00000028 r3:00000001 [ 1238.501495] [<c03c6728>] (netstat_show.isra.15+0x0/0x9c) from [<c03c69b8>] (show_tx_errors+0x18/0x1c) [ 1238.529196] r7:d5f945d8 r6:d5f945c0 r5:c049716c r4:c0650e7c [ 1238.546279] [<c03c69a0>] (show_tx_errors+0x0/0x1c) from [<c023963c>] (dev_attr_show+0x24/0x50) [ 1238.572157] [<c0239618>] (dev_attr_show+0x0/0x50) from [<c010c148>] (sysfs_read_file+0xb0/0x140) [ 1238.598554] r5:c049716c r4:d5c21240 [ 1238.609326] [<c010c098>] (sysfs_read_file+0x0/0x140) from [<c00b9ee4>] (vfs_read+0xb0/0x13c) [ 1238.634679] [<c00b9e34>] (vfs_read+0x0/0x13c) from [<c00ba0ac>] (SyS_read+0x44/0x74) [ 1238.657944] r8:bef45bf0 r7:00000000 r6:d6ac0600 r5:00000000 r4:00000000 [ 1238.678172] [<c00ba068>] (SyS_read+0x0/0x74) from [<c000eec0>] (ret_fast_syscall+0x0/0x30) ---- Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-27 18:04:15 -07:00
} else {
sh_eth_update_stat(ndev, &ndev->stats.tx_carrier_errors,
CNDCR);
sh_eth: Fix sleeping function called from invalid context This resolves the following bug which can be reproduced by building the kernel with CONFIG_DEBUG_ATOMIC_SLEEP=y and reading network statistics while the network interface is down. e.g.: ifconfig eth0 down cat /sys/class/net/eth0/statistics/tx_errors ---- [ 1238.161349] BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:952 [ 1238.188279] in_atomic(): 1, irqs_disabled(): 0, pid: 1388, name: cat [ 1238.207425] CPU: 0 PID: 1388 Comm: cat Not tainted 3.10.31-ltsi-00046-gefa0b46 #1087 [ 1238.230737] Backtrace: [ 1238.238123] [<c0012e64>] (dump_backtrace+0x0/0x10c) from [<c0013000>] (show_stack+0x18/0x1c) [ 1238.263499] r6:000003b8 r5:c06160c0 r4:c0669e00 r3:00404000 [ 1238.280583] [<c0012fe8>] (show_stack+0x0/0x1c) from [<c04515a4>] (dump_stack+0x20/0x28) [ 1238.304631] [<c0451584>] (dump_stack+0x0/0x28) from [<c004970c>] (__might_sleep+0xf8/0x118) [ 1238.329734] [<c0049614>] (__might_sleep+0x0/0x118) from [<c02465ac>] (__pm_runtime_resume+0x38/0x90) [ 1238.357170] r7:d616f000 r6:c049c458 r5:00000004 r4:d6a17210 [ 1238.374251] [<c0246574>] (__pm_runtime_resume+0x0/0x90) from [<c029b1c4>] (sh_eth_get_stats+0x44/0x280) [ 1238.402468] r7:d616f000 r6:c049c458 r5:d5c21000 r4:d5c21000 [ 1238.419552] [<c029b180>] (sh_eth_get_stats+0x0/0x280) from [<c03ae39c>] (dev_get_stats+0x54/0x88) [ 1238.446204] r5:d5c21000 r4:d5ed7e08 [ 1238.456980] [<c03ae348>] (dev_get_stats+0x0/0x88) from [<c03c677c>] (netstat_show.isra.15+0x54/0x9c) [ 1238.484413] r6:d5c21000 r5:d5c21238 r4:00000028 r3:00000001 [ 1238.501495] [<c03c6728>] (netstat_show.isra.15+0x0/0x9c) from [<c03c69b8>] (show_tx_errors+0x18/0x1c) [ 1238.529196] r7:d5f945d8 r6:d5f945c0 r5:c049716c r4:c0650e7c [ 1238.546279] [<c03c69a0>] (show_tx_errors+0x0/0x1c) from [<c023963c>] (dev_attr_show+0x24/0x50) [ 1238.572157] [<c0239618>] (dev_attr_show+0x0/0x50) from [<c010c148>] (sysfs_read_file+0xb0/0x140) [ 1238.598554] r5:c049716c r4:d5c21240 [ 1238.609326] [<c010c098>] (sysfs_read_file+0x0/0x140) from [<c00b9ee4>] (vfs_read+0xb0/0x13c) [ 1238.634679] [<c00b9e34>] (vfs_read+0x0/0x13c) from [<c00ba0ac>] (SyS_read+0x44/0x74) [ 1238.657944] r8:bef45bf0 r7:00000000 r6:d6ac0600 r5:00000000 r4:00000000 [ 1238.678172] [<c00ba068>] (SyS_read+0x0/0x74) from [<c000eec0>] (ret_fast_syscall+0x0/0x30) ---- Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-27 18:04:15 -07:00
}
return &ndev->stats;
}
/* device close function */
static int sh_eth_close(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
netif_stop_queue(ndev);
/* Serialise with the interrupt handler and NAPI, then disable
* interrupts. We have to clear the irq_enabled flag first to
* ensure that interrupts won't be re-enabled.
*/
mdp->irq_enabled = false;
synchronize_irq(ndev->irq);
napi_disable(&mdp->napi);
sh_eth_write(ndev, 0x0000, EESIPR);
sh_eth: Ensure DMA engines are stopped before freeing buffers Currently we try to clear EDRRR and EDTRR and immediately continue to free buffers. This is unsafe because: - In general, register writes are not serialised with DMA, so we still have to wait for DMA to complete somehow - The R8A7790 (R-Car H2) manual states that the TX running flag cannot be cleared by writing to EDTRR - The same manual states that clearing the RX running flag only stops RX DMA at the next packet boundary I applied this patch to the driver to detect DMA writes to freed buffers: > --- a/drivers/net/ethernet/renesas/sh_eth.c > +++ b/drivers/net/ethernet/renesas/sh_eth.c > @@ -1098,7 +1098,14 @@ static void sh_eth_ring_free(struct net_device *ndev) > /* Free Rx skb ringbuffer */ > if (mdp->rx_skbuff) { > for (i = 0; i < mdp->num_rx_ring; i++) > + memcpy(mdp->rx_skbuff[i]->data, > + "Hello, world", 12); > + msleep(100); > + for (i = 0; i < mdp->num_rx_ring; i++) { > + WARN_ON(memcmp(mdp->rx_skbuff[i]->data, > + "Hello, world", 12)); > dev_kfree_skb(mdp->rx_skbuff[i]); > + } > } > kfree(mdp->rx_skbuff); > mdp->rx_skbuff = NULL; then ran the loop: while ethtool -G eth0 rx 128 ; ethtool -G eth0 rx 64; do echo -n .; done and 'ping -f' toward the sh_eth port from another machine. The warning fired several times a minute. To fix these issues: - Deactivate all TX descriptors rather than writing to EDTRR - As there seems to be no way of telling when RX DMA is stopped, perform a soft reset to ensure that both DMA enginess are stopped - To reduce the possibility of the reset truncating a transmitted frame, disable egress and wait a reasonable time to reach a packet boundary before resetting - Update statistics before resetting (The 'reasonable time' does not allow for CS/CD in half-duplex mode, but half-duplex no longer seems reasonable!) Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 17:49:32 -07:00
sh_eth_dev_exit(ndev);
/* PHY Disconnect */
if (ndev->phydev) {
phy_stop(ndev->phydev);
phy_disconnect(ndev->phydev);
}
free_irq(ndev->irq, ndev);
/* Free all the skbuffs in the Rx queue and the DMA buffer. */
sh_eth_ring_free(ndev);
pm_runtime_put_sync(&mdp->pdev->dev);
sh_eth: Fix sleeping function called from invalid context This resolves the following bug which can be reproduced by building the kernel with CONFIG_DEBUG_ATOMIC_SLEEP=y and reading network statistics while the network interface is down. e.g.: ifconfig eth0 down cat /sys/class/net/eth0/statistics/tx_errors ---- [ 1238.161349] BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:952 [ 1238.188279] in_atomic(): 1, irqs_disabled(): 0, pid: 1388, name: cat [ 1238.207425] CPU: 0 PID: 1388 Comm: cat Not tainted 3.10.31-ltsi-00046-gefa0b46 #1087 [ 1238.230737] Backtrace: [ 1238.238123] [<c0012e64>] (dump_backtrace+0x0/0x10c) from [<c0013000>] (show_stack+0x18/0x1c) [ 1238.263499] r6:000003b8 r5:c06160c0 r4:c0669e00 r3:00404000 [ 1238.280583] [<c0012fe8>] (show_stack+0x0/0x1c) from [<c04515a4>] (dump_stack+0x20/0x28) [ 1238.304631] [<c0451584>] (dump_stack+0x0/0x28) from [<c004970c>] (__might_sleep+0xf8/0x118) [ 1238.329734] [<c0049614>] (__might_sleep+0x0/0x118) from [<c02465ac>] (__pm_runtime_resume+0x38/0x90) [ 1238.357170] r7:d616f000 r6:c049c458 r5:00000004 r4:d6a17210 [ 1238.374251] [<c0246574>] (__pm_runtime_resume+0x0/0x90) from [<c029b1c4>] (sh_eth_get_stats+0x44/0x280) [ 1238.402468] r7:d616f000 r6:c049c458 r5:d5c21000 r4:d5c21000 [ 1238.419552] [<c029b180>] (sh_eth_get_stats+0x0/0x280) from [<c03ae39c>] (dev_get_stats+0x54/0x88) [ 1238.446204] r5:d5c21000 r4:d5ed7e08 [ 1238.456980] [<c03ae348>] (dev_get_stats+0x0/0x88) from [<c03c677c>] (netstat_show.isra.15+0x54/0x9c) [ 1238.484413] r6:d5c21000 r5:d5c21238 r4:00000028 r3:00000001 [ 1238.501495] [<c03c6728>] (netstat_show.isra.15+0x0/0x9c) from [<c03c69b8>] (show_tx_errors+0x18/0x1c) [ 1238.529196] r7:d5f945d8 r6:d5f945c0 r5:c049716c r4:c0650e7c [ 1238.546279] [<c03c69a0>] (show_tx_errors+0x0/0x1c) from [<c023963c>] (dev_attr_show+0x24/0x50) [ 1238.572157] [<c0239618>] (dev_attr_show+0x0/0x50) from [<c010c148>] (sysfs_read_file+0xb0/0x140) [ 1238.598554] r5:c049716c r4:d5c21240 [ 1238.609326] [<c010c098>] (sysfs_read_file+0x0/0x140) from [<c00b9ee4>] (vfs_read+0xb0/0x13c) [ 1238.634679] [<c00b9e34>] (vfs_read+0x0/0x13c) from [<c00ba0ac>] (SyS_read+0x44/0x74) [ 1238.657944] r8:bef45bf0 r7:00000000 r6:d6ac0600 r5:00000000 r4:00000000 [ 1238.678172] [<c00ba068>] (SyS_read+0x0/0x74) from [<c000eec0>] (ret_fast_syscall+0x0/0x30) ---- Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-27 18:04:15 -07:00
mdp->is_opened = 0;
sh_eth: Fix sleeping function called from invalid context This resolves the following bug which can be reproduced by building the kernel with CONFIG_DEBUG_ATOMIC_SLEEP=y and reading network statistics while the network interface is down. e.g.: ifconfig eth0 down cat /sys/class/net/eth0/statistics/tx_errors ---- [ 1238.161349] BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:952 [ 1238.188279] in_atomic(): 1, irqs_disabled(): 0, pid: 1388, name: cat [ 1238.207425] CPU: 0 PID: 1388 Comm: cat Not tainted 3.10.31-ltsi-00046-gefa0b46 #1087 [ 1238.230737] Backtrace: [ 1238.238123] [<c0012e64>] (dump_backtrace+0x0/0x10c) from [<c0013000>] (show_stack+0x18/0x1c) [ 1238.263499] r6:000003b8 r5:c06160c0 r4:c0669e00 r3:00404000 [ 1238.280583] [<c0012fe8>] (show_stack+0x0/0x1c) from [<c04515a4>] (dump_stack+0x20/0x28) [ 1238.304631] [<c0451584>] (dump_stack+0x0/0x28) from [<c004970c>] (__might_sleep+0xf8/0x118) [ 1238.329734] [<c0049614>] (__might_sleep+0x0/0x118) from [<c02465ac>] (__pm_runtime_resume+0x38/0x90) [ 1238.357170] r7:d616f000 r6:c049c458 r5:00000004 r4:d6a17210 [ 1238.374251] [<c0246574>] (__pm_runtime_resume+0x0/0x90) from [<c029b1c4>] (sh_eth_get_stats+0x44/0x280) [ 1238.402468] r7:d616f000 r6:c049c458 r5:d5c21000 r4:d5c21000 [ 1238.419552] [<c029b180>] (sh_eth_get_stats+0x0/0x280) from [<c03ae39c>] (dev_get_stats+0x54/0x88) [ 1238.446204] r5:d5c21000 r4:d5ed7e08 [ 1238.456980] [<c03ae348>] (dev_get_stats+0x0/0x88) from [<c03c677c>] (netstat_show.isra.15+0x54/0x9c) [ 1238.484413] r6:d5c21000 r5:d5c21238 r4:00000028 r3:00000001 [ 1238.501495] [<c03c6728>] (netstat_show.isra.15+0x0/0x9c) from [<c03c69b8>] (show_tx_errors+0x18/0x1c) [ 1238.529196] r7:d5f945d8 r6:d5f945c0 r5:c049716c r4:c0650e7c [ 1238.546279] [<c03c69a0>] (show_tx_errors+0x0/0x1c) from [<c023963c>] (dev_attr_show+0x24/0x50) [ 1238.572157] [<c0239618>] (dev_attr_show+0x0/0x50) from [<c010c148>] (sysfs_read_file+0xb0/0x140) [ 1238.598554] r5:c049716c r4:d5c21240 [ 1238.609326] [<c010c098>] (sysfs_read_file+0x0/0x140) from [<c00b9ee4>] (vfs_read+0xb0/0x13c) [ 1238.634679] [<c00b9e34>] (vfs_read+0x0/0x13c) from [<c00ba0ac>] (SyS_read+0x44/0x74) [ 1238.657944] r8:bef45bf0 r7:00000000 r6:d6ac0600 r5:00000000 r4:00000000 [ 1238.678172] [<c00ba068>] (SyS_read+0x0/0x74) from [<c000eec0>] (ret_fast_syscall+0x0/0x30) ---- Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-27 18:04:15 -07:00
return 0;
}
/* ioctl to device function */
static int sh_eth_do_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
{
struct phy_device *phydev = ndev->phydev;
if (!netif_running(ndev))
return -EINVAL;
if (!phydev)
return -ENODEV;
return phy_mii_ioctl(phydev, rq, cmd);
}
static int sh_eth_change_mtu(struct net_device *ndev, int new_mtu)
{
if (netif_running(ndev))
return -EBUSY;
ndev->mtu = new_mtu;
netdev_update_features(ndev);
return 0;
}
/* For TSU_POSTn. Please refer to the manual about this (strange) bitfields */
static u32 sh_eth_tsu_get_post_mask(int entry)
{
return 0x0f << (28 - ((entry % 8) * 4));
}
static u32 sh_eth_tsu_get_post_bit(struct sh_eth_private *mdp, int entry)
{
return (0x08 >> (mdp->port << 1)) << (28 - ((entry % 8) * 4));
}
static void sh_eth_tsu_enable_cam_entry_post(struct net_device *ndev,
int entry)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int reg = TSU_POST1 + entry / 8;
u32 tmp;
tmp = sh_eth_tsu_read(mdp, reg);
sh_eth_tsu_write(mdp, tmp | sh_eth_tsu_get_post_bit(mdp, entry), reg);
}
static bool sh_eth_tsu_disable_cam_entry_post(struct net_device *ndev,
int entry)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int reg = TSU_POST1 + entry / 8;
u32 post_mask, ref_mask, tmp;
post_mask = sh_eth_tsu_get_post_mask(entry);
ref_mask = sh_eth_tsu_get_post_bit(mdp, entry) & ~post_mask;
tmp = sh_eth_tsu_read(mdp, reg);
sh_eth_tsu_write(mdp, tmp & ~post_mask, reg);
/* If other port enables, the function returns "true" */
return tmp & ref_mask;
}
static int sh_eth_tsu_busy(struct net_device *ndev)
{
int timeout = SH_ETH_TSU_TIMEOUT_MS * 100;
struct sh_eth_private *mdp = netdev_priv(ndev);
while ((sh_eth_tsu_read(mdp, TSU_ADSBSY) & TSU_ADSBSY_0)) {
udelay(10);
timeout--;
if (timeout <= 0) {
netdev_err(ndev, "%s: timeout\n", __func__);
return -ETIMEDOUT;
}
}
return 0;
}
static int sh_eth_tsu_write_entry(struct net_device *ndev, u16 offset,
const u8 *addr)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
u32 val;
val = addr[0] << 24 | addr[1] << 16 | addr[2] << 8 | addr[3];
iowrite32(val, mdp->tsu_addr + offset);
if (sh_eth_tsu_busy(ndev) < 0)
return -EBUSY;
val = addr[4] << 8 | addr[5];
iowrite32(val, mdp->tsu_addr + offset + 4);
if (sh_eth_tsu_busy(ndev) < 0)
return -EBUSY;
return 0;
}
static void sh_eth_tsu_read_entry(struct net_device *ndev, u16 offset, u8 *addr)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
u32 val;
val = ioread32(mdp->tsu_addr + offset);
addr[0] = (val >> 24) & 0xff;
addr[1] = (val >> 16) & 0xff;
addr[2] = (val >> 8) & 0xff;
addr[3] = val & 0xff;
val = ioread32(mdp->tsu_addr + offset + 4);
addr[4] = (val >> 8) & 0xff;
addr[5] = val & 0xff;
}
static int sh_eth_tsu_find_entry(struct net_device *ndev, const u8 *addr)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
u16 reg_offset = sh_eth_tsu_get_offset(mdp, TSU_ADRH0);
int i;
u8 c_addr[ETH_ALEN];
for (i = 0; i < SH_ETH_TSU_CAM_ENTRIES; i++, reg_offset += 8) {
sh_eth_tsu_read_entry(ndev, reg_offset, c_addr);
if (ether_addr_equal(addr, c_addr))
return i;
}
return -ENOENT;
}
static int sh_eth_tsu_find_empty(struct net_device *ndev)
{
u8 blank[ETH_ALEN];
int entry;
memset(blank, 0, sizeof(blank));
entry = sh_eth_tsu_find_entry(ndev, blank);
return (entry < 0) ? -ENOMEM : entry;
}
static int sh_eth_tsu_disable_cam_entry_table(struct net_device *ndev,
int entry)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
u16 reg_offset = sh_eth_tsu_get_offset(mdp, TSU_ADRH0);
int ret;
u8 blank[ETH_ALEN];
sh_eth_tsu_write(mdp, sh_eth_tsu_read(mdp, TSU_TEN) &
~(1 << (31 - entry)), TSU_TEN);
memset(blank, 0, sizeof(blank));
ret = sh_eth_tsu_write_entry(ndev, reg_offset + entry * 8, blank);
if (ret < 0)
return ret;
return 0;
}
static int sh_eth_tsu_add_entry(struct net_device *ndev, const u8 *addr)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
u16 reg_offset = sh_eth_tsu_get_offset(mdp, TSU_ADRH0);
int i, ret;
if (!mdp->cd->tsu)
return 0;
i = sh_eth_tsu_find_entry(ndev, addr);
if (i < 0) {
/* No entry found, create one */
i = sh_eth_tsu_find_empty(ndev);
if (i < 0)
return -ENOMEM;
ret = sh_eth_tsu_write_entry(ndev, reg_offset + i * 8, addr);
if (ret < 0)
return ret;
/* Enable the entry */
sh_eth_tsu_write(mdp, sh_eth_tsu_read(mdp, TSU_TEN) |
(1 << (31 - i)), TSU_TEN);
}
/* Entry found or created, enable POST */
sh_eth_tsu_enable_cam_entry_post(ndev, i);
return 0;
}
static int sh_eth_tsu_del_entry(struct net_device *ndev, const u8 *addr)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int i, ret;
if (!mdp->cd->tsu)
return 0;
i = sh_eth_tsu_find_entry(ndev, addr);
if (i) {
/* Entry found */
if (sh_eth_tsu_disable_cam_entry_post(ndev, i))
goto done;
/* Disable the entry if both ports was disabled */
ret = sh_eth_tsu_disable_cam_entry_table(ndev, i);
if (ret < 0)
return ret;
}
done:
return 0;
}
static int sh_eth_tsu_purge_all(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int i, ret;
if (!mdp->cd->tsu)
return 0;
for (i = 0; i < SH_ETH_TSU_CAM_ENTRIES; i++) {
if (sh_eth_tsu_disable_cam_entry_post(ndev, i))
continue;
/* Disable the entry if both ports was disabled */
ret = sh_eth_tsu_disable_cam_entry_table(ndev, i);
if (ret < 0)
return ret;
}
return 0;
}
static void sh_eth_tsu_purge_mcast(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
u16 reg_offset = sh_eth_tsu_get_offset(mdp, TSU_ADRH0);
u8 addr[ETH_ALEN];
int i;
if (!mdp->cd->tsu)
return;
for (i = 0; i < SH_ETH_TSU_CAM_ENTRIES; i++, reg_offset += 8) {
sh_eth_tsu_read_entry(ndev, reg_offset, addr);
if (is_multicast_ether_addr(addr))
sh_eth_tsu_del_entry(ndev, addr);
}
}
/* Update promiscuous flag and multicast filter */
static void sh_eth_set_rx_mode(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
u32 ecmr_bits;
int mcast_all = 0;
unsigned long flags;
spin_lock_irqsave(&mdp->lock, flags);
/* Initial condition is MCT = 1, PRM = 0.
* Depending on ndev->flags, set PRM or clear MCT
*/
ecmr_bits = sh_eth_read(ndev, ECMR) & ~ECMR_PRM;
if (mdp->cd->tsu)
ecmr_bits |= ECMR_MCT;
if (!(ndev->flags & IFF_MULTICAST)) {
sh_eth_tsu_purge_mcast(ndev);
mcast_all = 1;
}
if (ndev->flags & IFF_ALLMULTI) {
sh_eth_tsu_purge_mcast(ndev);
ecmr_bits &= ~ECMR_MCT;
mcast_all = 1;
}
if (ndev->flags & IFF_PROMISC) {
sh_eth_tsu_purge_all(ndev);
ecmr_bits = (ecmr_bits & ~ECMR_MCT) | ECMR_PRM;
} else if (mdp->cd->tsu) {
struct netdev_hw_addr *ha;
netdev_for_each_mc_addr(ha, ndev) {
if (mcast_all && is_multicast_ether_addr(ha->addr))
continue;
if (sh_eth_tsu_add_entry(ndev, ha->addr) < 0) {
if (!mcast_all) {
sh_eth_tsu_purge_mcast(ndev);
ecmr_bits &= ~ECMR_MCT;
mcast_all = 1;
}
}
}
}
/* update the ethernet mode */
sh_eth_write(ndev, ecmr_bits, ECMR);
spin_unlock_irqrestore(&mdp->lock, flags);
}
sh_eth: RX checksum offload support Add support for the RX checksum offload. This is enabled by default and may be disabled and re-enabled using 'ethtool': # ethtool -K eth0 rx off # ethtool -K eth0 rx on Some Ether MACs provide a simple checksumming scheme which appears to be completely compatible with CHECKSUM_COMPLETE: sum of all packet data after the L2 header is appended to packet data; this may be trivially read by the driver and used to update the skb accordingly. The same checksumming scheme is implemented in the EtherAVB MACs and now supported by the 'ravb' driver. In terms of performance, throughput is close to gigabit line rate with the RX checksum offload both enabled and disabled. The 'perf' output, however, appears to indicate that significantly less time is spent in do_csum() -- this is as expected. Test results with RX checksum offload enabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 933.93 [ perf record: Woken up 8 times to write data ] [ perf record: Captured and wrote 1.955 MB perf.data (41940 samples) ] ~/netperf-2.2pl4# perf report Samples: 41K of event 'cycles:ppp', Event count (approx.): 9915302763 Overhead Command Shared Object Symbol 9.44% netperf [kernel.kallsyms] [k] __arch_copy_to_user 7.75% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 6.31% swapper [kernel.kallsyms] [k] default_idle_call 5.89% swapper [kernel.kallsyms] [k] arch_cpu_idle 4.37% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 4.02% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.52% netperf [kernel.kallsyms] [k] preempt_count_sub 1.81% netperf [kernel.kallsyms] [k] tcp_recvmsg 1.80% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irqres 1.78% netperf [kernel.kallsyms] [k] preempt_count_add 1.36% netperf [kernel.kallsyms] [k] __tcp_transmit_skb 1.20% netperf [kernel.kallsyms] [k] __local_bh_enable_ip 1.10% netperf [kernel.kallsyms] [k] sh_eth_start_xmit Test results with RX checksum offload disabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 932.04 [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 3.642 MB perf.data (78817 samples) ] ~/netperf-2.2pl4# perf report Samples: 78K of event 'cycles:ppp', Event count (approx.): 18091442796 Overhead Command Shared Object Symbol 7.00% swapper [kernel.kallsyms] [k] do_csum 3.94% swapper [kernel.kallsyms] [k] sh_eth_poll 3.83% ksoftirqd/0 [kernel.kallsyms] [k] do_csum 3.23% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.87% netperf [kernel.kallsyms] [k] __arch_copy_to_user 2.86% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.13% swapper [kernel.kallsyms] [k] default_idle_call 2.12% ksoftirqd/0 [kernel.kallsyms] [k] sh_eth_poll 2.02% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.84% swapper [kernel.kallsyms] [k] __softirqentry_text_start 1.64% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 1.53% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 1.32% netperf [kernel.kallsyms] [k] preempt_count_sub 1.27% swapper [kernel.kallsyms] [k] __pi___inval_dcache_area 1.22% swapper [kernel.kallsyms] [k] check_preemption_disabled 1.01% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore The above results collected on the R-Car V3H Starter Kit board. Based on the commit 4d86d3818627 ("ravb: RX checksum offload")... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 11:06:52 -07:00
static void sh_eth_set_rx_csum(struct net_device *ndev, bool enable)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
unsigned long flags;
spin_lock_irqsave(&mdp->lock, flags);
/* Disable TX and RX */
sh_eth_rcv_snd_disable(ndev);
/* Modify RX Checksum setting */
sh_eth_modify(ndev, ECMR, ECMR_RCSC, enable ? ECMR_RCSC : 0);
/* Enable TX and RX */
sh_eth_rcv_snd_enable(ndev);
spin_unlock_irqrestore(&mdp->lock, flags);
}
static int sh_eth_set_features(struct net_device *ndev,
netdev_features_t features)
{
netdev_features_t changed = ndev->features ^ features;
struct sh_eth_private *mdp = netdev_priv(ndev);
if (changed & NETIF_F_RXCSUM && mdp->cd->rx_csum)
sh_eth_set_rx_csum(ndev, features & NETIF_F_RXCSUM);
ndev->features = features;
return 0;
}
static int sh_eth_get_vtag_index(struct sh_eth_private *mdp)
{
if (!mdp->port)
return TSU_VTAG0;
else
return TSU_VTAG1;
}
static int sh_eth_vlan_rx_add_vid(struct net_device *ndev,
__be16 proto, u16 vid)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int vtag_reg_index = sh_eth_get_vtag_index(mdp);
if (unlikely(!mdp->cd->tsu))
return -EPERM;
/* No filtering if vid = 0 */
if (!vid)
return 0;
mdp->vlan_num_ids++;
/* The controller has one VLAN tag HW filter. So, if the filter is
* already enabled, the driver disables it and the filte
*/
if (mdp->vlan_num_ids > 1) {
/* disable VLAN filter */
sh_eth_tsu_write(mdp, 0, vtag_reg_index);
return 0;
}
sh_eth_tsu_write(mdp, TSU_VTAG_ENABLE | (vid & TSU_VTAG_VID_MASK),
vtag_reg_index);
return 0;
}
static int sh_eth_vlan_rx_kill_vid(struct net_device *ndev,
__be16 proto, u16 vid)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int vtag_reg_index = sh_eth_get_vtag_index(mdp);
if (unlikely(!mdp->cd->tsu))
return -EPERM;
/* No filtering if vid = 0 */
if (!vid)
return 0;
mdp->vlan_num_ids--;
sh_eth_tsu_write(mdp, 0, vtag_reg_index);
return 0;
}
/* SuperH's TSU register init function */
static void sh_eth_tsu_init(struct sh_eth_private *mdp)
{
if (!mdp->cd->dual_port) {
sh_eth_tsu_write(mdp, 0, TSU_TEN); /* Disable all CAM entry */
sh_eth_tsu_write(mdp, TSU_FWSLC_POSTENU | TSU_FWSLC_POSTENL,
TSU_FWSLC); /* Enable POST registers */
return;
}
sh_eth_tsu_write(mdp, 0, TSU_FWEN0); /* Disable forward(0->1) */
sh_eth_tsu_write(mdp, 0, TSU_FWEN1); /* Disable forward(1->0) */
sh_eth_tsu_write(mdp, 0, TSU_FCM); /* forward fifo 3k-3k */
sh_eth_tsu_write(mdp, 0xc, TSU_BSYSL0);
sh_eth_tsu_write(mdp, 0xc, TSU_BSYSL1);
sh_eth_tsu_write(mdp, 0, TSU_PRISL0);
sh_eth_tsu_write(mdp, 0, TSU_PRISL1);
sh_eth_tsu_write(mdp, 0, TSU_FWSL0);
sh_eth_tsu_write(mdp, 0, TSU_FWSL1);
sh_eth_tsu_write(mdp, TSU_FWSLC_POSTENU | TSU_FWSLC_POSTENL, TSU_FWSLC);
sh_eth_tsu_write(mdp, 0, TSU_QTAGM0); /* Disable QTAG(0->1) */
sh_eth_tsu_write(mdp, 0, TSU_QTAGM1); /* Disable QTAG(1->0) */
sh_eth_tsu_write(mdp, 0, TSU_FWSR); /* all interrupt status clear */
sh_eth_tsu_write(mdp, 0, TSU_FWINMK); /* Disable all interrupt */
sh_eth_tsu_write(mdp, 0, TSU_TEN); /* Disable all CAM entry */
sh_eth_tsu_write(mdp, 0, TSU_POST1); /* Disable CAM entry [ 0- 7] */
sh_eth_tsu_write(mdp, 0, TSU_POST2); /* Disable CAM entry [ 8-15] */
sh_eth_tsu_write(mdp, 0, TSU_POST3); /* Disable CAM entry [16-23] */
sh_eth_tsu_write(mdp, 0, TSU_POST4); /* Disable CAM entry [24-31] */
}
/* MDIO bus release function */
static int sh_mdio_release(struct sh_eth_private *mdp)
{
/* unregister mdio bus */
mdiobus_unregister(mdp->mii_bus);
/* free bitbang info */
free_mdio_bitbang(mdp->mii_bus);
return 0;
}
/* MDIO bus init function */
static int sh_mdio_init(struct sh_eth_private *mdp,
struct sh_eth_plat_data *pd)
{
int ret;
struct bb_info *bitbang;
struct platform_device *pdev = mdp->pdev;
struct device *dev = &mdp->pdev->dev;
/* create bit control struct for PHY */
bitbang = devm_kzalloc(dev, sizeof(struct bb_info), GFP_KERNEL);
if (!bitbang)
return -ENOMEM;
/* bitbang init */
bitbang->addr = mdp->addr + mdp->reg_offset[PIR];
bitbang->set_gate = pd->set_mdio_gate;
bitbang->ctrl.ops = &bb_ops;
/* MII controller setting */
mdp->mii_bus = alloc_mdio_bitbang(&bitbang->ctrl);
if (!mdp->mii_bus)
return -ENOMEM;
/* Hook up MII support for ethtool */
mdp->mii_bus->name = "sh_mii";
mdp->mii_bus->parent = dev;
snprintf(mdp->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
pdev->name, pdev->id);
/* register MDIO bus */
if (pd->phy_irq > 0)
mdp->mii_bus->irq[pd->phy] = pd->phy_irq;
ret = of_mdiobus_register(mdp->mii_bus, dev->of_node);
if (ret)
goto out_free_bus;
return 0;
out_free_bus:
free_mdio_bitbang(mdp->mii_bus);
return ret;
}
static const u16 *sh_eth_get_register_offset(int register_type)
{
const u16 *reg_offset = NULL;
switch (register_type) {
case SH_ETH_REG_GIGABIT:
reg_offset = sh_eth_offset_gigabit;
break;
case SH_ETH_REG_FAST_RZ:
reg_offset = sh_eth_offset_fast_rz;
break;
case SH_ETH_REG_FAST_RCAR:
reg_offset = sh_eth_offset_fast_rcar;
break;
case SH_ETH_REG_FAST_SH4:
reg_offset = sh_eth_offset_fast_sh4;
break;
case SH_ETH_REG_FAST_SH3_SH2:
reg_offset = sh_eth_offset_fast_sh3_sh2;
break;
}
return reg_offset;
}
static const struct net_device_ops sh_eth_netdev_ops = {
.ndo_open = sh_eth_open,
.ndo_stop = sh_eth_close,
.ndo_start_xmit = sh_eth_start_xmit,
.ndo_get_stats = sh_eth_get_stats,
.ndo_set_rx_mode = sh_eth_set_rx_mode,
.ndo_tx_timeout = sh_eth_tx_timeout,
.ndo_do_ioctl = sh_eth_do_ioctl,
.ndo_change_mtu = sh_eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
sh_eth: RX checksum offload support Add support for the RX checksum offload. This is enabled by default and may be disabled and re-enabled using 'ethtool': # ethtool -K eth0 rx off # ethtool -K eth0 rx on Some Ether MACs provide a simple checksumming scheme which appears to be completely compatible with CHECKSUM_COMPLETE: sum of all packet data after the L2 header is appended to packet data; this may be trivially read by the driver and used to update the skb accordingly. The same checksumming scheme is implemented in the EtherAVB MACs and now supported by the 'ravb' driver. In terms of performance, throughput is close to gigabit line rate with the RX checksum offload both enabled and disabled. The 'perf' output, however, appears to indicate that significantly less time is spent in do_csum() -- this is as expected. Test results with RX checksum offload enabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 933.93 [ perf record: Woken up 8 times to write data ] [ perf record: Captured and wrote 1.955 MB perf.data (41940 samples) ] ~/netperf-2.2pl4# perf report Samples: 41K of event 'cycles:ppp', Event count (approx.): 9915302763 Overhead Command Shared Object Symbol 9.44% netperf [kernel.kallsyms] [k] __arch_copy_to_user 7.75% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 6.31% swapper [kernel.kallsyms] [k] default_idle_call 5.89% swapper [kernel.kallsyms] [k] arch_cpu_idle 4.37% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 4.02% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.52% netperf [kernel.kallsyms] [k] preempt_count_sub 1.81% netperf [kernel.kallsyms] [k] tcp_recvmsg 1.80% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irqres 1.78% netperf [kernel.kallsyms] [k] preempt_count_add 1.36% netperf [kernel.kallsyms] [k] __tcp_transmit_skb 1.20% netperf [kernel.kallsyms] [k] __local_bh_enable_ip 1.10% netperf [kernel.kallsyms] [k] sh_eth_start_xmit Test results with RX checksum offload disabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 932.04 [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 3.642 MB perf.data (78817 samples) ] ~/netperf-2.2pl4# perf report Samples: 78K of event 'cycles:ppp', Event count (approx.): 18091442796 Overhead Command Shared Object Symbol 7.00% swapper [kernel.kallsyms] [k] do_csum 3.94% swapper [kernel.kallsyms] [k] sh_eth_poll 3.83% ksoftirqd/0 [kernel.kallsyms] [k] do_csum 3.23% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.87% netperf [kernel.kallsyms] [k] __arch_copy_to_user 2.86% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.13% swapper [kernel.kallsyms] [k] default_idle_call 2.12% ksoftirqd/0 [kernel.kallsyms] [k] sh_eth_poll 2.02% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.84% swapper [kernel.kallsyms] [k] __softirqentry_text_start 1.64% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 1.53% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 1.32% netperf [kernel.kallsyms] [k] preempt_count_sub 1.27% swapper [kernel.kallsyms] [k] __pi___inval_dcache_area 1.22% swapper [kernel.kallsyms] [k] check_preemption_disabled 1.01% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore The above results collected on the R-Car V3H Starter Kit board. Based on the commit 4d86d3818627 ("ravb: RX checksum offload")... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 11:06:52 -07:00
.ndo_set_features = sh_eth_set_features,
};
static const struct net_device_ops sh_eth_netdev_ops_tsu = {
.ndo_open = sh_eth_open,
.ndo_stop = sh_eth_close,
.ndo_start_xmit = sh_eth_start_xmit,
.ndo_get_stats = sh_eth_get_stats,
.ndo_set_rx_mode = sh_eth_set_rx_mode,
.ndo_vlan_rx_add_vid = sh_eth_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = sh_eth_vlan_rx_kill_vid,
.ndo_tx_timeout = sh_eth_tx_timeout,
.ndo_do_ioctl = sh_eth_do_ioctl,
.ndo_change_mtu = sh_eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
sh_eth: RX checksum offload support Add support for the RX checksum offload. This is enabled by default and may be disabled and re-enabled using 'ethtool': # ethtool -K eth0 rx off # ethtool -K eth0 rx on Some Ether MACs provide a simple checksumming scheme which appears to be completely compatible with CHECKSUM_COMPLETE: sum of all packet data after the L2 header is appended to packet data; this may be trivially read by the driver and used to update the skb accordingly. The same checksumming scheme is implemented in the EtherAVB MACs and now supported by the 'ravb' driver. In terms of performance, throughput is close to gigabit line rate with the RX checksum offload both enabled and disabled. The 'perf' output, however, appears to indicate that significantly less time is spent in do_csum() -- this is as expected. Test results with RX checksum offload enabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 933.93 [ perf record: Woken up 8 times to write data ] [ perf record: Captured and wrote 1.955 MB perf.data (41940 samples) ] ~/netperf-2.2pl4# perf report Samples: 41K of event 'cycles:ppp', Event count (approx.): 9915302763 Overhead Command Shared Object Symbol 9.44% netperf [kernel.kallsyms] [k] __arch_copy_to_user 7.75% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 6.31% swapper [kernel.kallsyms] [k] default_idle_call 5.89% swapper [kernel.kallsyms] [k] arch_cpu_idle 4.37% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 4.02% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.52% netperf [kernel.kallsyms] [k] preempt_count_sub 1.81% netperf [kernel.kallsyms] [k] tcp_recvmsg 1.80% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irqres 1.78% netperf [kernel.kallsyms] [k] preempt_count_add 1.36% netperf [kernel.kallsyms] [k] __tcp_transmit_skb 1.20% netperf [kernel.kallsyms] [k] __local_bh_enable_ip 1.10% netperf [kernel.kallsyms] [k] sh_eth_start_xmit Test results with RX checksum offload disabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 932.04 [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 3.642 MB perf.data (78817 samples) ] ~/netperf-2.2pl4# perf report Samples: 78K of event 'cycles:ppp', Event count (approx.): 18091442796 Overhead Command Shared Object Symbol 7.00% swapper [kernel.kallsyms] [k] do_csum 3.94% swapper [kernel.kallsyms] [k] sh_eth_poll 3.83% ksoftirqd/0 [kernel.kallsyms] [k] do_csum 3.23% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.87% netperf [kernel.kallsyms] [k] __arch_copy_to_user 2.86% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.13% swapper [kernel.kallsyms] [k] default_idle_call 2.12% ksoftirqd/0 [kernel.kallsyms] [k] sh_eth_poll 2.02% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.84% swapper [kernel.kallsyms] [k] __softirqentry_text_start 1.64% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 1.53% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 1.32% netperf [kernel.kallsyms] [k] preempt_count_sub 1.27% swapper [kernel.kallsyms] [k] __pi___inval_dcache_area 1.22% swapper [kernel.kallsyms] [k] check_preemption_disabled 1.01% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore The above results collected on the R-Car V3H Starter Kit board. Based on the commit 4d86d3818627 ("ravb: RX checksum offload")... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 11:06:52 -07:00
.ndo_set_features = sh_eth_set_features,
};
#ifdef CONFIG_OF
static struct sh_eth_plat_data *sh_eth_parse_dt(struct device *dev)
{
struct device_node *np = dev->of_node;
struct sh_eth_plat_data *pdata;
phy_interface_t interface;
const char *mac_addr;
int ret;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return NULL;
ret = of_get_phy_mode(np, &interface);
if (ret)
return NULL;
pdata->phy_interface = interface;
mac_addr = of_get_mac_address(np);
if (!IS_ERR(mac_addr))
ether_addr_copy(pdata->mac_addr, mac_addr);
pdata->no_ether_link =
of_property_read_bool(np, "renesas,no-ether-link");
pdata->ether_link_active_low =
of_property_read_bool(np, "renesas,ether-link-active-low");
return pdata;
}
static const struct of_device_id sh_eth_match_table[] = {
{ .compatible = "renesas,gether-r8a7740", .data = &r8a7740_data },
{ .compatible = "renesas,ether-r8a7743", .data = &rcar_gen2_data },
{ .compatible = "renesas,ether-r8a7745", .data = &rcar_gen2_data },
{ .compatible = "renesas,ether-r8a7778", .data = &rcar_gen1_data },
{ .compatible = "renesas,ether-r8a7779", .data = &rcar_gen1_data },
{ .compatible = "renesas,ether-r8a7790", .data = &rcar_gen2_data },
{ .compatible = "renesas,ether-r8a7791", .data = &rcar_gen2_data },
{ .compatible = "renesas,ether-r8a7793", .data = &rcar_gen2_data },
{ .compatible = "renesas,ether-r8a7794", .data = &rcar_gen2_data },
{ .compatible = "renesas,gether-r8a77980", .data = &r8a77980_data },
{ .compatible = "renesas,ether-r7s72100", .data = &r7s72100_data },
{ .compatible = "renesas,ether-r7s9210", .data = &r7s9210_data },
{ .compatible = "renesas,rcar-gen1-ether", .data = &rcar_gen1_data },
{ .compatible = "renesas,rcar-gen2-ether", .data = &rcar_gen2_data },
{ }
};
MODULE_DEVICE_TABLE(of, sh_eth_match_table);
#else
static inline struct sh_eth_plat_data *sh_eth_parse_dt(struct device *dev)
{
return NULL;
}
#endif
static int sh_eth_drv_probe(struct platform_device *pdev)
{
struct resource *res;
struct sh_eth_plat_data *pd = dev_get_platdata(&pdev->dev);
const struct platform_device_id *id = platform_get_device_id(pdev);
struct sh_eth_private *mdp;
struct net_device *ndev;
int ret;
/* get base addr */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ndev = alloc_etherdev(sizeof(struct sh_eth_private));
if (!ndev)
return -ENOMEM;
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
ret = platform_get_irq(pdev, 0);
if (ret < 0)
goto out_release;
ndev->irq = ret;
SET_NETDEV_DEV(ndev, &pdev->dev);
mdp = netdev_priv(ndev);
mdp->num_tx_ring = TX_RING_SIZE;
mdp->num_rx_ring = RX_RING_SIZE;
mdp->addr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(mdp->addr)) {
ret = PTR_ERR(mdp->addr);
goto out_release;
}
ndev->base_addr = res->start;
spin_lock_init(&mdp->lock);
mdp->pdev = pdev;
if (pdev->dev.of_node)
pd = sh_eth_parse_dt(&pdev->dev);
if (!pd) {
dev_err(&pdev->dev, "no platform data\n");
ret = -EINVAL;
goto out_release;
}
/* get PHY ID */
mdp->phy_id = pd->phy;
mdp->phy_interface = pd->phy_interface;
mdp->no_ether_link = pd->no_ether_link;
mdp->ether_link_active_low = pd->ether_link_active_low;
/* set cpu data */
if (id)
mdp->cd = (struct sh_eth_cpu_data *)id->driver_data;
else
mdp->cd = (struct sh_eth_cpu_data *)of_device_get_match_data(&pdev->dev);
mdp->reg_offset = sh_eth_get_register_offset(mdp->cd->register_type);
if (!mdp->reg_offset) {
dev_err(&pdev->dev, "Unknown register type (%d)\n",
mdp->cd->register_type);
ret = -EINVAL;
goto out_release;
}
sh_eth_set_default_cpu_data(mdp->cd);
/* User's manual states max MTU should be 2048 but due to the
* alignment calculations in sh_eth_ring_init() the practical
* MTU is a bit less. Maybe this can be optimized some more.
*/
ndev->max_mtu = 2000 - (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN);
ndev->min_mtu = ETH_MIN_MTU;
sh_eth: RX checksum offload support Add support for the RX checksum offload. This is enabled by default and may be disabled and re-enabled using 'ethtool': # ethtool -K eth0 rx off # ethtool -K eth0 rx on Some Ether MACs provide a simple checksumming scheme which appears to be completely compatible with CHECKSUM_COMPLETE: sum of all packet data after the L2 header is appended to packet data; this may be trivially read by the driver and used to update the skb accordingly. The same checksumming scheme is implemented in the EtherAVB MACs and now supported by the 'ravb' driver. In terms of performance, throughput is close to gigabit line rate with the RX checksum offload both enabled and disabled. The 'perf' output, however, appears to indicate that significantly less time is spent in do_csum() -- this is as expected. Test results with RX checksum offload enabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 933.93 [ perf record: Woken up 8 times to write data ] [ perf record: Captured and wrote 1.955 MB perf.data (41940 samples) ] ~/netperf-2.2pl4# perf report Samples: 41K of event 'cycles:ppp', Event count (approx.): 9915302763 Overhead Command Shared Object Symbol 9.44% netperf [kernel.kallsyms] [k] __arch_copy_to_user 7.75% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 6.31% swapper [kernel.kallsyms] [k] default_idle_call 5.89% swapper [kernel.kallsyms] [k] arch_cpu_idle 4.37% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 4.02% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.52% netperf [kernel.kallsyms] [k] preempt_count_sub 1.81% netperf [kernel.kallsyms] [k] tcp_recvmsg 1.80% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irqres 1.78% netperf [kernel.kallsyms] [k] preempt_count_add 1.36% netperf [kernel.kallsyms] [k] __tcp_transmit_skb 1.20% netperf [kernel.kallsyms] [k] __local_bh_enable_ip 1.10% netperf [kernel.kallsyms] [k] sh_eth_start_xmit Test results with RX checksum offload disabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 932.04 [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 3.642 MB perf.data (78817 samples) ] ~/netperf-2.2pl4# perf report Samples: 78K of event 'cycles:ppp', Event count (approx.): 18091442796 Overhead Command Shared Object Symbol 7.00% swapper [kernel.kallsyms] [k] do_csum 3.94% swapper [kernel.kallsyms] [k] sh_eth_poll 3.83% ksoftirqd/0 [kernel.kallsyms] [k] do_csum 3.23% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.87% netperf [kernel.kallsyms] [k] __arch_copy_to_user 2.86% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.13% swapper [kernel.kallsyms] [k] default_idle_call 2.12% ksoftirqd/0 [kernel.kallsyms] [k] sh_eth_poll 2.02% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.84% swapper [kernel.kallsyms] [k] __softirqentry_text_start 1.64% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 1.53% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 1.32% netperf [kernel.kallsyms] [k] preempt_count_sub 1.27% swapper [kernel.kallsyms] [k] __pi___inval_dcache_area 1.22% swapper [kernel.kallsyms] [k] check_preemption_disabled 1.01% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore The above results collected on the R-Car V3H Starter Kit board. Based on the commit 4d86d3818627 ("ravb: RX checksum offload")... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 11:06:52 -07:00
if (mdp->cd->rx_csum) {
ndev->features = NETIF_F_RXCSUM;
ndev->hw_features = NETIF_F_RXCSUM;
}
/* set function */
if (mdp->cd->tsu)
ndev->netdev_ops = &sh_eth_netdev_ops_tsu;
else
ndev->netdev_ops = &sh_eth_netdev_ops;
ndev->ethtool_ops = &sh_eth_ethtool_ops;
ndev->watchdog_timeo = TX_TIMEOUT;
/* debug message level */
mdp->msg_enable = SH_ETH_DEF_MSG_ENABLE;
/* read and set MAC address */
read_mac_address(ndev, pd->mac_addr);
if (!is_valid_ether_addr(ndev->dev_addr)) {
dev_warn(&pdev->dev,
"no valid MAC address supplied, using a random one.\n");
eth_hw_addr_random(ndev);
}
if (mdp->cd->tsu) {
int port = pdev->id < 0 ? 0 : pdev->id % 2;
struct resource *rtsu;
rtsu = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!rtsu) {
dev_err(&pdev->dev, "no TSU resource\n");
ret = -ENODEV;
goto out_release;
}
/* We can only request the TSU region for the first port
* of the two sharing this TSU for the probe to succeed...
*/
if (port == 0 &&
!devm_request_mem_region(&pdev->dev, rtsu->start,
resource_size(rtsu),
dev_name(&pdev->dev))) {
dev_err(&pdev->dev, "can't request TSU resource.\n");
ret = -EBUSY;
goto out_release;
}
/* ioremap the TSU registers */
mdp->tsu_addr = devm_ioremap(&pdev->dev, rtsu->start,
resource_size(rtsu));
if (!mdp->tsu_addr) {
dev_err(&pdev->dev, "TSU region ioremap() failed.\n");
ret = -ENOMEM;
goto out_release;
}
mdp->port = port;
sh_eth: RX checksum offload support Add support for the RX checksum offload. This is enabled by default and may be disabled and re-enabled using 'ethtool': # ethtool -K eth0 rx off # ethtool -K eth0 rx on Some Ether MACs provide a simple checksumming scheme which appears to be completely compatible with CHECKSUM_COMPLETE: sum of all packet data after the L2 header is appended to packet data; this may be trivially read by the driver and used to update the skb accordingly. The same checksumming scheme is implemented in the EtherAVB MACs and now supported by the 'ravb' driver. In terms of performance, throughput is close to gigabit line rate with the RX checksum offload both enabled and disabled. The 'perf' output, however, appears to indicate that significantly less time is spent in do_csum() -- this is as expected. Test results with RX checksum offload enabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 933.93 [ perf record: Woken up 8 times to write data ] [ perf record: Captured and wrote 1.955 MB perf.data (41940 samples) ] ~/netperf-2.2pl4# perf report Samples: 41K of event 'cycles:ppp', Event count (approx.): 9915302763 Overhead Command Shared Object Symbol 9.44% netperf [kernel.kallsyms] [k] __arch_copy_to_user 7.75% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 6.31% swapper [kernel.kallsyms] [k] default_idle_call 5.89% swapper [kernel.kallsyms] [k] arch_cpu_idle 4.37% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 4.02% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.52% netperf [kernel.kallsyms] [k] preempt_count_sub 1.81% netperf [kernel.kallsyms] [k] tcp_recvmsg 1.80% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irqres 1.78% netperf [kernel.kallsyms] [k] preempt_count_add 1.36% netperf [kernel.kallsyms] [k] __tcp_transmit_skb 1.20% netperf [kernel.kallsyms] [k] __local_bh_enable_ip 1.10% netperf [kernel.kallsyms] [k] sh_eth_start_xmit Test results with RX checksum offload disabled: ~/netperf-2.2pl4# perf record -a ./netperf -t TCP_MAERTS -H 192.168.2.4 TCP MAERTS TEST to 192.168.2.4 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.01 932.04 [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 3.642 MB perf.data (78817 samples) ] ~/netperf-2.2pl4# perf report Samples: 78K of event 'cycles:ppp', Event count (approx.): 18091442796 Overhead Command Shared Object Symbol 7.00% swapper [kernel.kallsyms] [k] do_csum 3.94% swapper [kernel.kallsyms] [k] sh_eth_poll 3.83% ksoftirqd/0 [kernel.kallsyms] [k] do_csum 3.23% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 2.87% netperf [kernel.kallsyms] [k] __arch_copy_to_user 2.86% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.13% swapper [kernel.kallsyms] [k] default_idle_call 2.12% ksoftirqd/0 [kernel.kallsyms] [k] sh_eth_poll 2.02% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.84% swapper [kernel.kallsyms] [k] __softirqentry_text_start 1.64% swapper [kernel.kallsyms] [k] tick_nohz_idle_exit 1.53% netperf [kernel.kallsyms] [k] _raw_spin_unlock_irq 1.32% netperf [kernel.kallsyms] [k] preempt_count_sub 1.27% swapper [kernel.kallsyms] [k] __pi___inval_dcache_area 1.22% swapper [kernel.kallsyms] [k] check_preemption_disabled 1.01% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore The above results collected on the R-Car V3H Starter Kit board. Based on the commit 4d86d3818627 ("ravb: RX checksum offload")... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04 11:06:52 -07:00
ndev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
/* Need to init only the first port of the two sharing a TSU */
if (port == 0) {
if (mdp->cd->chip_reset)
mdp->cd->chip_reset(ndev);
/* TSU init (Init only)*/
sh_eth_tsu_init(mdp);
}
}
if (mdp->cd->rmiimode)
sh_eth_write(ndev, 0x1, RMIIMODE);
/* MDIO bus init */
ret = sh_mdio_init(mdp, pd);
if (ret) {
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev, "MDIO init failed: %d\n", ret);
goto out_release;
}
netif_napi_add(ndev, &mdp->napi, sh_eth_poll, 64);
/* network device register */
ret = register_netdev(ndev);
if (ret)
goto out_napi_del;
if (mdp->cd->magic)
device_set_wakeup_capable(&pdev->dev, 1);
/* print device information */
netdev_info(ndev, "Base address at 0x%x, %pM, IRQ %d.\n",
(u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
pm_runtime_put(&pdev->dev);
platform_set_drvdata(pdev, ndev);
return ret;
out_napi_del:
netif_napi_del(&mdp->napi);
sh_mdio_release(mdp);
out_release:
/* net_dev free */
free_netdev(ndev);
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return ret;
}
static int sh_eth_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct sh_eth_private *mdp = netdev_priv(ndev);
unregister_netdev(ndev);
netif_napi_del(&mdp->napi);
sh_mdio_release(mdp);
pm_runtime_disable(&pdev->dev);
free_netdev(ndev);
return 0;
}
#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
static int sh_eth_wol_setup(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
/* Only allow ECI interrupts */
synchronize_irq(ndev->irq);
napi_disable(&mdp->napi);
sh_eth_write(ndev, EESIPR_ECIIP, EESIPR);
/* Enable MagicPacket */
sh_eth_modify(ndev, ECMR, ECMR_MPDE, ECMR_MPDE);
return enable_irq_wake(ndev->irq);
}
static int sh_eth_wol_restore(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
int ret;
napi_enable(&mdp->napi);
/* Disable MagicPacket */
sh_eth_modify(ndev, ECMR, ECMR_MPDE, 0);
/* The device needs to be reset to restore MagicPacket logic
* for next wakeup. If we close and open the device it will
* both be reset and all registers restored. This is what
* happens during suspend and resume without WoL enabled.
*/
ret = sh_eth_close(ndev);
if (ret < 0)
return ret;
ret = sh_eth_open(ndev);
if (ret < 0)
return ret;
return disable_irq_wake(ndev->irq);
}
static int sh_eth_suspend(struct device *dev)
{
struct net_device *ndev = dev_get_drvdata(dev);
struct sh_eth_private *mdp = netdev_priv(ndev);
int ret = 0;
if (!netif_running(ndev))
return 0;
netif_device_detach(ndev);
if (mdp->wol_enabled)
ret = sh_eth_wol_setup(ndev);
else
ret = sh_eth_close(ndev);
return ret;
}
static int sh_eth_resume(struct device *dev)
{
struct net_device *ndev = dev_get_drvdata(dev);
struct sh_eth_private *mdp = netdev_priv(ndev);
int ret = 0;
if (!netif_running(ndev))
return 0;
if (mdp->wol_enabled)
ret = sh_eth_wol_restore(ndev);
else
ret = sh_eth_open(ndev);
if (ret < 0)
return ret;
netif_device_attach(ndev);
return ret;
}
#endif
static int sh_eth_runtime_nop(struct device *dev)
{
/* Runtime PM callback shared between ->runtime_suspend()
* and ->runtime_resume(). Simply returns success.
*
* This driver re-initializes all registers after
* pm_runtime_get_sync() anyway so there is no need
* to save and restore registers here.
*/
return 0;
}
static const struct dev_pm_ops sh_eth_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(sh_eth_suspend, sh_eth_resume)
SET_RUNTIME_PM_OPS(sh_eth_runtime_nop, sh_eth_runtime_nop, NULL)
};
#define SH_ETH_PM_OPS (&sh_eth_dev_pm_ops)
#else
#define SH_ETH_PM_OPS NULL
#endif
static const struct platform_device_id sh_eth_id_table[] = {
{ "sh7619-ether", (kernel_ulong_t)&sh7619_data },
{ "sh771x-ether", (kernel_ulong_t)&sh771x_data },
{ "sh7724-ether", (kernel_ulong_t)&sh7724_data },
{ "sh7734-gether", (kernel_ulong_t)&sh7734_data },
{ "sh7757-ether", (kernel_ulong_t)&sh7757_data },
{ "sh7757-gether", (kernel_ulong_t)&sh7757_data_giga },
{ "sh7763-gether", (kernel_ulong_t)&sh7763_data },
{ }
};
MODULE_DEVICE_TABLE(platform, sh_eth_id_table);
static struct platform_driver sh_eth_driver = {
.probe = sh_eth_drv_probe,
.remove = sh_eth_drv_remove,
.id_table = sh_eth_id_table,
.driver = {
.name = CARDNAME,
.pm = SH_ETH_PM_OPS,
.of_match_table = of_match_ptr(sh_eth_match_table),
},
};
module_platform_driver(sh_eth_driver);
MODULE_AUTHOR("Nobuhiro Iwamatsu, Yoshihiro Shimoda");
MODULE_DESCRIPTION("Renesas SuperH Ethernet driver");
MODULE_LICENSE("GPL v2");