1
0
Fork 0
alistair23-linux/security/integrity/ima/ima_main.c

717 lines
20 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Integrity Measurement Architecture
*
* Copyright (C) 2005,2006,2007,2008 IBM Corporation
*
* Authors:
* Reiner Sailer <sailer@watson.ibm.com>
* Serge Hallyn <serue@us.ibm.com>
* Kylene Hall <kylene@us.ibm.com>
* Mimi Zohar <zohar@us.ibm.com>
*
* File: ima_main.c
* implements the IMA hooks: ima_bprm_check, ima_file_mmap,
* and ima_file_check.
*/
ima: Fallback to the builtin hash algorithm IMA requires having it's hash algorithm be compiled-in due to it's early use. The default IMA algorithm is protected by Kconfig to be compiled-in. The ima_hash kernel parameter allows to choose the hash algorithm. When the specified algorithm is not available or available as a module, IMA initialization fails, which leads to a kernel panic (mknodat syscall calls ima_post_path_mknod()). Therefore as fallback we force IMA to use the default builtin Kconfig hash algorithm. Fixed crash: $ grep CONFIG_CRYPTO_MD4 .config CONFIG_CRYPTO_MD4=m [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-2.3-default root=UUID=74ae8202-9ca7-4e39-813b-22287ec52f7a video=1024x768-16 plymouth.ignore-serial-consoles console=ttyS0 console=tty resume=/dev/disk/by-path/pci-0000:00:07.0-part3 splash=silent showopts ima_hash=md4 ... [ 1.545190] ima: Can not allocate md4 (reason: -2) ... [ 2.610120] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2.611903] IP: ima_match_policy+0x23/0x390 [ 2.612967] PGD 0 P4D 0 [ 2.613080] Oops: 0000 [#1] SMP [ 2.613080] Modules linked in: autofs4 [ 2.613080] Supported: Yes [ 2.613080] CPU: 0 PID: 1 Comm: systemd Not tainted 4.12.14-2.3-default #1 [ 2.613080] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 [ 2.613080] task: ffff88003e2d0040 task.stack: ffffc90000190000 [ 2.613080] RIP: 0010:ima_match_policy+0x23/0x390 [ 2.613080] RSP: 0018:ffffc90000193e88 EFLAGS: 00010296 [ 2.613080] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000004 [ 2.613080] RDX: 0000000000000010 RSI: 0000000000000001 RDI: ffff880037071728 [ 2.613080] RBP: 0000000000008000 R08: 0000000000000000 R09: 0000000000000000 [ 2.613080] R10: 0000000000000008 R11: 61c8864680b583eb R12: 00005580ff10086f [ 2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000008000 [ 2.613080] FS: 00007f5c1da08940(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 2.613080] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.613080] CR2: 0000000000000000 CR3: 0000000037002000 CR4: 00000000003406f0 [ 2.613080] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2.613080] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2.613080] Call Trace: [ 2.613080] ? shmem_mknod+0xbf/0xd0 [ 2.613080] ima_post_path_mknod+0x1c/0x40 [ 2.613080] SyS_mknod+0x210/0x220 [ 2.613080] entry_SYSCALL_64_fastpath+0x1a/0xa5 [ 2.613080] RIP: 0033:0x7f5c1bfde570 [ 2.613080] RSP: 002b:00007ffde1c90dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000085 [ 2.613080] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5c1bfde570 [ 2.613080] RDX: 0000000000000000 RSI: 0000000000008000 RDI: 00005580ff10086f [ 2.613080] RBP: 00007ffde1c91040 R08: 00005580ff10086f R09: 0000000000000000 [ 2.613080] R10: 0000000000104000 R11: 0000000000000246 R12: 00005580ffb99660 [ 2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000002 [ 2.613080] Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 44 8d 14 09 41 55 41 54 55 53 44 89 d3 09 cb 48 83 ec 38 48 8b 05 c5 03 29 01 <4c> 8b 20 4c 39 e0 0f 84 d7 01 00 00 4c 89 44 24 08 89 54 24 20 [ 2.613080] RIP: ima_match_policy+0x23/0x390 RSP: ffffc90000193e88 [ 2.613080] CR2: 0000000000000000 [ 2.613080] ---[ end trace 9a9f0a8a73079f6a ]--- [ 2.673052] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 2.673052] [ 2.675337] Kernel Offset: disabled [ 2.676405] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 Signed-off-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2018-03-23 07:41:08 -06:00
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/file.h>
#include <linux/binfmts.h>
#include <linux/mount.h>
#include <linux/mman.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
#include <linux/slab.h>
ima: integrity appraisal extension IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-02-13 08:15:05 -07:00
#include <linux/xattr.h>
#include <linux/ima.h>
#include <linux/iversion.h>
#include <linux/fs.h>
#include "ima.h"
ima: integrity appraisal extension IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-02-13 08:15:05 -07:00
#ifdef CONFIG_IMA_APPRAISE
int ima_appraise = IMA_APPRAISE_ENFORCE;
#else
int ima_appraise;
#endif
int ima_hash_algo = HASH_ALGO_SHA1;
static int hash_setup_done;
static struct notifier_block ima_lsm_policy_notifier = {
.notifier_call = ima_lsm_policy_change,
};
static int __init hash_setup(char *str)
{
struct ima_template_desc *template_desc = ima_template_desc_current();
int i;
if (hash_setup_done)
return 1;
if (strcmp(template_desc->name, IMA_TEMPLATE_IMA_NAME) == 0) {
if (strncmp(str, "sha1", 4) == 0)
ima_hash_algo = HASH_ALGO_SHA1;
else if (strncmp(str, "md5", 3) == 0)
ima_hash_algo = HASH_ALGO_MD5;
else
return 1;
goto out;
}
i = match_string(hash_algo_name, HASH_ALGO__LAST, str);
if (i < 0)
return 1;
ima_hash_algo = i;
out:
hash_setup_done = 1;
return 1;
}
__setup("ima_hash=", hash_setup);
/* Prevent mmap'ing a file execute that is already mmap'ed write */
static int mmap_violation_check(enum ima_hooks func, struct file *file,
char **pathbuf, const char **pathname,
char *filename)
{
struct inode *inode;
int rc = 0;
if ((func == MMAP_CHECK) && mapping_writably_mapped(file->f_mapping)) {
rc = -ETXTBSY;
inode = file_inode(file);
if (!*pathbuf) /* ima_rdwr_violation possibly pre-fetched */
*pathname = ima_d_path(&file->f_path, pathbuf,
filename);
integrity_audit_msg(AUDIT_INTEGRITY_DATA, inode, *pathname,
"mmap_file", "mmapped_writers", rc, 0);
}
return rc;
}
/*
* ima_rdwr_violation_check
*
* Only invalidate the PCR for measured files:
* - Opening a file for write when already open for read,
* results in a time of measure, time of use (ToMToU) error.
* - Opening a file for read when already open for write,
* could result in a file measurement error.
*
*/
ima: fix race condition on ima_rdwr_violation_check and process_measurement This patch fixes a race condition between two functions that try to access the same inode. Since the i_mutex lock is held and released separately in the two functions, there may be the possibility that a violation is not correctly detected. Suppose there are two processes, A (reader) and B (writer), if the following sequence happens: A: ima_rdwr_violation_check() B: ima_rdwr_violation_check() B: process_measurement() B: starts writing the inode A: process_measurement() the ToMToU violation (a reader may be accessing a content different from that measured, due to a concurrent modification by a writer) will not be detected. To avoid this issue, the violation check and the measurement must be done atomically. This patch fixes the problem by moving the violation check inside process_measurement() when the i_mutex lock is held. Differently from the old code, the violation check is executed also for the MMAP_CHECK hook (other than for FILE_CHECK). This allows to detect ToMToU violations that are possible because shared libraries can be opened for writing while they are in use (according to the output of 'man mmap', the mmap() flag MAP_DENYWRITE is ignored). Changes in v5 (Roberto Sassu): * get iint if action is not zero * exit process_measurement() after the violation check if action is zero * reverse order process_measurement() exit cleanup (Mimi) Changes in v4 (Dmitry Kasatkin): * iint allocation is done before calling ima_rdrw_violation_check() (Suggested-by Mimi) * do not check for violations if the policy does not contain 'measure' rules (done by Roberto Sassu) Changes in v3 (Dmitry Kasatkin): * no violation checking for MMAP_CHECK function in this patch * remove use of filename from violation * removes checking if ima is enabled from ima_rdrw_violation_check * slight style change Suggested-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-09-12 11:35:55 -06:00
static void ima_rdwr_violation_check(struct file *file,
struct integrity_iint_cache *iint,
int must_measure,
ima: fix race condition on ima_rdwr_violation_check and process_measurement This patch fixes a race condition between two functions that try to access the same inode. Since the i_mutex lock is held and released separately in the two functions, there may be the possibility that a violation is not correctly detected. Suppose there are two processes, A (reader) and B (writer), if the following sequence happens: A: ima_rdwr_violation_check() B: ima_rdwr_violation_check() B: process_measurement() B: starts writing the inode A: process_measurement() the ToMToU violation (a reader may be accessing a content different from that measured, due to a concurrent modification by a writer) will not be detected. To avoid this issue, the violation check and the measurement must be done atomically. This patch fixes the problem by moving the violation check inside process_measurement() when the i_mutex lock is held. Differently from the old code, the violation check is executed also for the MMAP_CHECK hook (other than for FILE_CHECK). This allows to detect ToMToU violations that are possible because shared libraries can be opened for writing while they are in use (according to the output of 'man mmap', the mmap() flag MAP_DENYWRITE is ignored). Changes in v5 (Roberto Sassu): * get iint if action is not zero * exit process_measurement() after the violation check if action is zero * reverse order process_measurement() exit cleanup (Mimi) Changes in v4 (Dmitry Kasatkin): * iint allocation is done before calling ima_rdrw_violation_check() (Suggested-by Mimi) * do not check for violations if the policy does not contain 'measure' rules (done by Roberto Sassu) Changes in v3 (Dmitry Kasatkin): * no violation checking for MMAP_CHECK function in this patch * remove use of filename from violation * removes checking if ima is enabled from ima_rdrw_violation_check * slight style change Suggested-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-09-12 11:35:55 -06:00
char **pathbuf,
const char **pathname,
char *filename)
{
struct inode *inode = file_inode(file);
fmode_t mode = file->f_mode;
bool send_tomtou = false, send_writers = false;
if (mode & FMODE_WRITE) {
if (atomic_read(&inode->i_readcount) && IS_IMA(inode)) {
ima: fix race condition on ima_rdwr_violation_check and process_measurement This patch fixes a race condition between two functions that try to access the same inode. Since the i_mutex lock is held and released separately in the two functions, there may be the possibility that a violation is not correctly detected. Suppose there are two processes, A (reader) and B (writer), if the following sequence happens: A: ima_rdwr_violation_check() B: ima_rdwr_violation_check() B: process_measurement() B: starts writing the inode A: process_measurement() the ToMToU violation (a reader may be accessing a content different from that measured, due to a concurrent modification by a writer) will not be detected. To avoid this issue, the violation check and the measurement must be done atomically. This patch fixes the problem by moving the violation check inside process_measurement() when the i_mutex lock is held. Differently from the old code, the violation check is executed also for the MMAP_CHECK hook (other than for FILE_CHECK). This allows to detect ToMToU violations that are possible because shared libraries can be opened for writing while they are in use (according to the output of 'man mmap', the mmap() flag MAP_DENYWRITE is ignored). Changes in v5 (Roberto Sassu): * get iint if action is not zero * exit process_measurement() after the violation check if action is zero * reverse order process_measurement() exit cleanup (Mimi) Changes in v4 (Dmitry Kasatkin): * iint allocation is done before calling ima_rdrw_violation_check() (Suggested-by Mimi) * do not check for violations if the policy does not contain 'measure' rules (done by Roberto Sassu) Changes in v3 (Dmitry Kasatkin): * no violation checking for MMAP_CHECK function in this patch * remove use of filename from violation * removes checking if ima is enabled from ima_rdrw_violation_check * slight style change Suggested-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-09-12 11:35:55 -06:00
if (!iint)
iint = integrity_iint_find(inode);
/* IMA_MEASURE is set from reader side */
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
if (iint && test_bit(IMA_MUST_MEASURE,
&iint->atomic_flags))
send_tomtou = true;
}
} else {
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
if (must_measure)
set_bit(IMA_MUST_MEASURE, &iint->atomic_flags);
if (inode_is_open_for_write(inode) && must_measure)
send_writers = true;
}
if (!send_tomtou && !send_writers)
return;
*pathname = ima_d_path(&file->f_path, pathbuf, filename);
if (send_tomtou)
ima_add_violation(file, *pathname, iint,
"invalid_pcr", "ToMToU");
if (send_writers)
ima_add_violation(file, *pathname, iint,
"invalid_pcr", "open_writers");
}
static void ima_check_last_writer(struct integrity_iint_cache *iint,
ima: integrity appraisal extension IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-02-13 08:15:05 -07:00
struct inode *inode, struct file *file)
{
fmode_t mode = file->f_mode;
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
bool update;
ima: integrity appraisal extension IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-02-13 08:15:05 -07:00
if (!(mode & FMODE_WRITE))
return;
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
mutex_lock(&iint->mutex);
if (atomic_read(&inode->i_writecount) == 1) {
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
update = test_and_clear_bit(IMA_UPDATE_XATTR,
&iint->atomic_flags);
if (!IS_I_VERSION(inode) ||
!inode_eq_iversion(inode, iint->version) ||
(iint->flags & IMA_NEW_FILE)) {
iint->flags &= ~(IMA_DONE_MASK | IMA_NEW_FILE);
iint->measured_pcrs = 0;
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
if (update)
ima_update_xattr(iint, file);
}
ima: integrity appraisal extension IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-02-13 08:15:05 -07:00
}
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
mutex_unlock(&iint->mutex);
}
/**
* ima_file_free - called on __fput()
* @file: pointer to file structure being freed
*
* Flag files that changed, based on i_version
*/
void ima_file_free(struct file *file)
{
struct inode *inode = file_inode(file);
struct integrity_iint_cache *iint;
if (!ima_policy_flag || !S_ISREG(inode->i_mode))
return;
iint = integrity_iint_find(inode);
if (!iint)
return;
ima_check_last_writer(iint, inode, file);
}
static int process_measurement(struct file *file, const struct cred *cred,
u32 secid, char *buf, loff_t size, int mask,
enum ima_hooks func)
{
struct inode *inode = file_inode(file);
ima: fix race condition on ima_rdwr_violation_check and process_measurement This patch fixes a race condition between two functions that try to access the same inode. Since the i_mutex lock is held and released separately in the two functions, there may be the possibility that a violation is not correctly detected. Suppose there are two processes, A (reader) and B (writer), if the following sequence happens: A: ima_rdwr_violation_check() B: ima_rdwr_violation_check() B: process_measurement() B: starts writing the inode A: process_measurement() the ToMToU violation (a reader may be accessing a content different from that measured, due to a concurrent modification by a writer) will not be detected. To avoid this issue, the violation check and the measurement must be done atomically. This patch fixes the problem by moving the violation check inside process_measurement() when the i_mutex lock is held. Differently from the old code, the violation check is executed also for the MMAP_CHECK hook (other than for FILE_CHECK). This allows to detect ToMToU violations that are possible because shared libraries can be opened for writing while they are in use (according to the output of 'man mmap', the mmap() flag MAP_DENYWRITE is ignored). Changes in v5 (Roberto Sassu): * get iint if action is not zero * exit process_measurement() after the violation check if action is zero * reverse order process_measurement() exit cleanup (Mimi) Changes in v4 (Dmitry Kasatkin): * iint allocation is done before calling ima_rdrw_violation_check() (Suggested-by Mimi) * do not check for violations if the policy does not contain 'measure' rules (done by Roberto Sassu) Changes in v3 (Dmitry Kasatkin): * no violation checking for MMAP_CHECK function in this patch * remove use of filename from violation * removes checking if ima is enabled from ima_rdrw_violation_check * slight style change Suggested-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-09-12 11:35:55 -06:00
struct integrity_iint_cache *iint = NULL;
struct ima_template_desc *template_desc = NULL;
char *pathbuf = NULL;
char filename[NAME_MAX];
const char *pathname = NULL;
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
int rc = 0, action, must_appraise = 0;
int pcr = CONFIG_IMA_MEASURE_PCR_IDX;
struct evm_ima_xattr_data *xattr_value = NULL;
struct modsig *modsig = NULL;
int xattr_len = 0;
ima: fix race condition on ima_rdwr_violation_check and process_measurement This patch fixes a race condition between two functions that try to access the same inode. Since the i_mutex lock is held and released separately in the two functions, there may be the possibility that a violation is not correctly detected. Suppose there are two processes, A (reader) and B (writer), if the following sequence happens: A: ima_rdwr_violation_check() B: ima_rdwr_violation_check() B: process_measurement() B: starts writing the inode A: process_measurement() the ToMToU violation (a reader may be accessing a content different from that measured, due to a concurrent modification by a writer) will not be detected. To avoid this issue, the violation check and the measurement must be done atomically. This patch fixes the problem by moving the violation check inside process_measurement() when the i_mutex lock is held. Differently from the old code, the violation check is executed also for the MMAP_CHECK hook (other than for FILE_CHECK). This allows to detect ToMToU violations that are possible because shared libraries can be opened for writing while they are in use (according to the output of 'man mmap', the mmap() flag MAP_DENYWRITE is ignored). Changes in v5 (Roberto Sassu): * get iint if action is not zero * exit process_measurement() after the violation check if action is zero * reverse order process_measurement() exit cleanup (Mimi) Changes in v4 (Dmitry Kasatkin): * iint allocation is done before calling ima_rdrw_violation_check() (Suggested-by Mimi) * do not check for violations if the policy does not contain 'measure' rules (done by Roberto Sassu) Changes in v3 (Dmitry Kasatkin): * no violation checking for MMAP_CHECK function in this patch * remove use of filename from violation * removes checking if ima is enabled from ima_rdrw_violation_check * slight style change Suggested-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-09-12 11:35:55 -06:00
bool violation_check;
enum hash_algo hash_algo;
if (!ima_policy_flag || !S_ISREG(inode->i_mode))
return 0;
/* Return an IMA_MEASURE, IMA_APPRAISE, IMA_AUDIT action
* bitmask based on the appraise/audit/measurement policy.
* Included is the appraise submask.
*/
action = ima_get_action(inode, cred, secid, mask, func, &pcr,
&template_desc);
violation_check = ((func == FILE_CHECK || func == MMAP_CHECK) &&
ima: fix race condition on ima_rdwr_violation_check and process_measurement This patch fixes a race condition between two functions that try to access the same inode. Since the i_mutex lock is held and released separately in the two functions, there may be the possibility that a violation is not correctly detected. Suppose there are two processes, A (reader) and B (writer), if the following sequence happens: A: ima_rdwr_violation_check() B: ima_rdwr_violation_check() B: process_measurement() B: starts writing the inode A: process_measurement() the ToMToU violation (a reader may be accessing a content different from that measured, due to a concurrent modification by a writer) will not be detected. To avoid this issue, the violation check and the measurement must be done atomically. This patch fixes the problem by moving the violation check inside process_measurement() when the i_mutex lock is held. Differently from the old code, the violation check is executed also for the MMAP_CHECK hook (other than for FILE_CHECK). This allows to detect ToMToU violations that are possible because shared libraries can be opened for writing while they are in use (according to the output of 'man mmap', the mmap() flag MAP_DENYWRITE is ignored). Changes in v5 (Roberto Sassu): * get iint if action is not zero * exit process_measurement() after the violation check if action is zero * reverse order process_measurement() exit cleanup (Mimi) Changes in v4 (Dmitry Kasatkin): * iint allocation is done before calling ima_rdrw_violation_check() (Suggested-by Mimi) * do not check for violations if the policy does not contain 'measure' rules (done by Roberto Sassu) Changes in v3 (Dmitry Kasatkin): * no violation checking for MMAP_CHECK function in this patch * remove use of filename from violation * removes checking if ima is enabled from ima_rdrw_violation_check * slight style change Suggested-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-09-12 11:35:55 -06:00
(ima_policy_flag & IMA_MEASURE));
if (!action && !violation_check)
ima: integrity appraisal extension IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-02-13 08:15:05 -07:00
return 0;
must_appraise = action & IMA_APPRAISE;
/* Is the appraise rule hook specific? */
if (action & IMA_FILE_APPRAISE)
func = FILE_CHECK;
inode_lock(inode);
ima: integrity appraisal extension IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-02-13 08:15:05 -07:00
ima: fix race condition on ima_rdwr_violation_check and process_measurement This patch fixes a race condition between two functions that try to access the same inode. Since the i_mutex lock is held and released separately in the two functions, there may be the possibility that a violation is not correctly detected. Suppose there are two processes, A (reader) and B (writer), if the following sequence happens: A: ima_rdwr_violation_check() B: ima_rdwr_violation_check() B: process_measurement() B: starts writing the inode A: process_measurement() the ToMToU violation (a reader may be accessing a content different from that measured, due to a concurrent modification by a writer) will not be detected. To avoid this issue, the violation check and the measurement must be done atomically. This patch fixes the problem by moving the violation check inside process_measurement() when the i_mutex lock is held. Differently from the old code, the violation check is executed also for the MMAP_CHECK hook (other than for FILE_CHECK). This allows to detect ToMToU violations that are possible because shared libraries can be opened for writing while they are in use (according to the output of 'man mmap', the mmap() flag MAP_DENYWRITE is ignored). Changes in v5 (Roberto Sassu): * get iint if action is not zero * exit process_measurement() after the violation check if action is zero * reverse order process_measurement() exit cleanup (Mimi) Changes in v4 (Dmitry Kasatkin): * iint allocation is done before calling ima_rdrw_violation_check() (Suggested-by Mimi) * do not check for violations if the policy does not contain 'measure' rules (done by Roberto Sassu) Changes in v3 (Dmitry Kasatkin): * no violation checking for MMAP_CHECK function in this patch * remove use of filename from violation * removes checking if ima is enabled from ima_rdrw_violation_check * slight style change Suggested-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-09-12 11:35:55 -06:00
if (action) {
iint = integrity_inode_get(inode);
if (!iint)
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
rc = -ENOMEM;
ima: fix race condition on ima_rdwr_violation_check and process_measurement This patch fixes a race condition between two functions that try to access the same inode. Since the i_mutex lock is held and released separately in the two functions, there may be the possibility that a violation is not correctly detected. Suppose there are two processes, A (reader) and B (writer), if the following sequence happens: A: ima_rdwr_violation_check() B: ima_rdwr_violation_check() B: process_measurement() B: starts writing the inode A: process_measurement() the ToMToU violation (a reader may be accessing a content different from that measured, due to a concurrent modification by a writer) will not be detected. To avoid this issue, the violation check and the measurement must be done atomically. This patch fixes the problem by moving the violation check inside process_measurement() when the i_mutex lock is held. Differently from the old code, the violation check is executed also for the MMAP_CHECK hook (other than for FILE_CHECK). This allows to detect ToMToU violations that are possible because shared libraries can be opened for writing while they are in use (according to the output of 'man mmap', the mmap() flag MAP_DENYWRITE is ignored). Changes in v5 (Roberto Sassu): * get iint if action is not zero * exit process_measurement() after the violation check if action is zero * reverse order process_measurement() exit cleanup (Mimi) Changes in v4 (Dmitry Kasatkin): * iint allocation is done before calling ima_rdrw_violation_check() (Suggested-by Mimi) * do not check for violations if the policy does not contain 'measure' rules (done by Roberto Sassu) Changes in v3 (Dmitry Kasatkin): * no violation checking for MMAP_CHECK function in this patch * remove use of filename from violation * removes checking if ima is enabled from ima_rdrw_violation_check * slight style change Suggested-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-09-12 11:35:55 -06:00
}
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
if (!rc && violation_check)
ima_rdwr_violation_check(file, iint, action & IMA_MEASURE,
&pathbuf, &pathname, filename);
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
inode_unlock(inode);
if (rc)
goto out;
if (!action)
goto out;
mutex_lock(&iint->mutex);
if (test_and_clear_bit(IMA_CHANGE_ATTR, &iint->atomic_flags))
/* reset appraisal flags if ima_inode_post_setattr was called */
iint->flags &= ~(IMA_APPRAISE | IMA_APPRAISED |
IMA_APPRAISE_SUBMASK | IMA_APPRAISED_SUBMASK |
IMA_ACTION_FLAGS);
/*
* Re-evaulate the file if either the xattr has changed or the
* kernel has no way of detecting file change on the filesystem.
* (Limited to privileged mounted filesystems.)
*/
if (test_and_clear_bit(IMA_CHANGE_XATTR, &iint->atomic_flags) ||
((inode->i_sb->s_iflags & SB_I_IMA_UNVERIFIABLE_SIGNATURE) &&
!(inode->i_sb->s_iflags & SB_I_UNTRUSTED_MOUNTER) &&
!(action & IMA_FAIL_UNVERIFIABLE_SIGS))) {
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
iint->flags &= ~IMA_DONE_MASK;
iint->measured_pcrs = 0;
}
ima: integrity appraisal extension IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-02-13 08:15:05 -07:00
/* Determine if already appraised/measured based on bitmask
* (IMA_MEASURE, IMA_MEASURED, IMA_XXXX_APPRAISE, IMA_XXXX_APPRAISED,
* IMA_AUDIT, IMA_AUDITED)
*/
ima: integrity appraisal extension IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-02-13 08:15:05 -07:00
iint->flags |= action;
action &= IMA_DO_MASK;
action &= ~((iint->flags & (IMA_DONE_MASK ^ IMA_MEASURED)) >> 1);
/* If target pcr is already measured, unset IMA_MEASURE action */
if ((action & IMA_MEASURE) && (iint->measured_pcrs & (0x1 << pcr)))
action ^= IMA_MEASURE;
ima: integrity appraisal extension IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-02-13 08:15:05 -07:00
/* HASH sets the digital signature and update flags, nothing else */
if ((action & IMA_HASH) &&
!(test_bit(IMA_DIGSIG, &iint->atomic_flags))) {
xattr_len = ima_read_xattr(file_dentry(file), &xattr_value);
if ((xattr_value && xattr_len > 2) &&
(xattr_value->type == EVM_IMA_XATTR_DIGSIG))
set_bit(IMA_DIGSIG, &iint->atomic_flags);
iint->flags |= IMA_HASHED;
action ^= IMA_HASH;
set_bit(IMA_UPDATE_XATTR, &iint->atomic_flags);
}
ima: integrity appraisal extension IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-02-13 08:15:05 -07:00
/* Nothing to do, just return existing appraised status */
if (!action) {
if (must_appraise) {
rc = mmap_violation_check(func, file, &pathbuf,
&pathname, filename);
if (!rc)
rc = ima_get_cache_status(iint, func);
}
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
goto out_locked;
ima: integrity appraisal extension IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-02-13 08:15:05 -07:00
}
if ((action & IMA_APPRAISE_SUBMASK) ||
strcmp(template_desc->name, IMA_TEMPLATE_IMA_NAME) != 0) {
/* read 'security.ima' */
xattr_len = ima_read_xattr(file_dentry(file), &xattr_value);
/* Read the appended modsig if allowed by the policy. */
if (iint->flags & IMA_MODSIG_ALLOWED)
ima_read_modsig(func, buf, size, &modsig);
}
hash_algo = ima_get_hash_algo(xattr_value, xattr_len);
rc = ima_collect_measurement(iint, file, buf, size, hash_algo, modsig);
if (rc != 0 && rc != -EBADF && rc != -EINVAL)
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
goto out_locked;
if (!pathbuf) /* ima_rdwr_violation possibly pre-fetched */
pathname = ima_d_path(&file->f_path, &pathbuf, filename);
ima: integrity appraisal extension IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-02-13 08:15:05 -07:00
if (action & IMA_MEASURE)
ima_store_measurement(iint, file, pathname,
xattr_value, xattr_len, modsig, pcr,
template_desc);
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
if (rc == 0 && (action & IMA_APPRAISE_SUBMASK)) {
inode_lock(inode);
rc = ima_appraise_measurement(func, iint, file, pathname,
xattr_value, xattr_len, modsig);
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
inode_unlock(inode);
if (!rc)
rc = mmap_violation_check(func, file, &pathbuf,
&pathname, filename);
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
}
if (action & IMA_AUDIT)
ima_audit_measurement(iint, pathname);
ima: fix race condition on ima_rdwr_violation_check and process_measurement This patch fixes a race condition between two functions that try to access the same inode. Since the i_mutex lock is held and released separately in the two functions, there may be the possibility that a violation is not correctly detected. Suppose there are two processes, A (reader) and B (writer), if the following sequence happens: A: ima_rdwr_violation_check() B: ima_rdwr_violation_check() B: process_measurement() B: starts writing the inode A: process_measurement() the ToMToU violation (a reader may be accessing a content different from that measured, due to a concurrent modification by a writer) will not be detected. To avoid this issue, the violation check and the measurement must be done atomically. This patch fixes the problem by moving the violation check inside process_measurement() when the i_mutex lock is held. Differently from the old code, the violation check is executed also for the MMAP_CHECK hook (other than for FILE_CHECK). This allows to detect ToMToU violations that are possible because shared libraries can be opened for writing while they are in use (according to the output of 'man mmap', the mmap() flag MAP_DENYWRITE is ignored). Changes in v5 (Roberto Sassu): * get iint if action is not zero * exit process_measurement() after the violation check if action is zero * reverse order process_measurement() exit cleanup (Mimi) Changes in v4 (Dmitry Kasatkin): * iint allocation is done before calling ima_rdrw_violation_check() (Suggested-by Mimi) * do not check for violations if the policy does not contain 'measure' rules (done by Roberto Sassu) Changes in v3 (Dmitry Kasatkin): * no violation checking for MMAP_CHECK function in this patch * remove use of filename from violation * removes checking if ima is enabled from ima_rdrw_violation_check * slight style change Suggested-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-09-12 11:35:55 -06:00
if ((file->f_flags & O_DIRECT) && (iint->flags & IMA_PERMIT_DIRECTIO))
rc = 0;
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
out_locked:
if ((mask & MAY_WRITE) && test_bit(IMA_DIGSIG, &iint->atomic_flags) &&
!(iint->flags & IMA_NEW_FILE))
rc = -EACCES;
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
mutex_unlock(&iint->mutex);
ima: fix race condition on ima_rdwr_violation_check and process_measurement This patch fixes a race condition between two functions that try to access the same inode. Since the i_mutex lock is held and released separately in the two functions, there may be the possibility that a violation is not correctly detected. Suppose there are two processes, A (reader) and B (writer), if the following sequence happens: A: ima_rdwr_violation_check() B: ima_rdwr_violation_check() B: process_measurement() B: starts writing the inode A: process_measurement() the ToMToU violation (a reader may be accessing a content different from that measured, due to a concurrent modification by a writer) will not be detected. To avoid this issue, the violation check and the measurement must be done atomically. This patch fixes the problem by moving the violation check inside process_measurement() when the i_mutex lock is held. Differently from the old code, the violation check is executed also for the MMAP_CHECK hook (other than for FILE_CHECK). This allows to detect ToMToU violations that are possible because shared libraries can be opened for writing while they are in use (according to the output of 'man mmap', the mmap() flag MAP_DENYWRITE is ignored). Changes in v5 (Roberto Sassu): * get iint if action is not zero * exit process_measurement() after the violation check if action is zero * reverse order process_measurement() exit cleanup (Mimi) Changes in v4 (Dmitry Kasatkin): * iint allocation is done before calling ima_rdrw_violation_check() (Suggested-by Mimi) * do not check for violations if the policy does not contain 'measure' rules (done by Roberto Sassu) Changes in v3 (Dmitry Kasatkin): * no violation checking for MMAP_CHECK function in this patch * remove use of filename from violation * removes checking if ima is enabled from ima_rdrw_violation_check * slight style change Suggested-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-09-12 11:35:55 -06:00
kfree(xattr_value);
ima_free_modsig(modsig);
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
out:
if (pathbuf)
__putname(pathbuf);
ima: re-introduce own integrity cache lock Before IMA appraisal was introduced, IMA was using own integrity cache lock along with i_mutex. process_measurement and ima_file_free took the iint->mutex first and then the i_mutex, while setxattr, chmod and chown took the locks in reverse order. To resolve the potential deadlock, i_mutex was moved to protect entire IMA functionality and the redundant iint->mutex was eliminated. Solution was based on the assumption that filesystem code does not take i_mutex further. But when file is opened with O_DIRECT flag, direct-io implementation takes i_mutex and produces deadlock. Furthermore, certain other filesystem operations, such as llseek, also take i_mutex. More recently some filesystems have replaced their filesystem specific lock with the global i_rwsem to read a file. As a result, when IMA attempts to calculate the file hash, reading the file attempts to take the i_rwsem again. To resolve O_DIRECT related deadlock problem, this patch re-introduces iint->mutex. But to eliminate the original chmod() related deadlock problem, this patch eliminates the requirement for chmod hooks to take the iint->mutex by introducing additional atomic iint->attr_flags to indicate calling of the hooks. The allowed locking order is to take the iint->mutex first and then the i_rwsem. Original flags were cleared in chmod(), setxattr() or removwxattr() hooks and tested when file was closed or opened again. New atomic flags are set or cleared in those hooks and tested to clear iint->flags on close or on open. Atomic flags are following: * IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown, chgrp) and file attributes have changed. On file open, it causes IMA to clear iint->flags to re-evaluate policy and perform IMA functions again. * IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called and extended attributes have changed. On file open, it causes IMA to clear iint->flags IMA_DONE_MASK to re-appraise. * IMA_UPDATE_XATTR - indicates that security.ima needs to be updated. It is cleared if file policy changes and no update is needed. * IMA_DIGSIG - indicates that file security.ima has signature and file security.ima must not update to file has on file close. * IMA_MUST_MEASURE - indicates the file is in the measurement policy. Fixes: Commit 6552321831dc ("xfs: remove i_iolock and use i_rwsem in the VFS inode instead") Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-12-05 12:06:34 -07:00
if (must_appraise) {
if (rc && (ima_appraise & IMA_APPRAISE_ENFORCE))
return -EACCES;
if (file->f_mode & FMODE_WRITE)
set_bit(IMA_UPDATE_XATTR, &iint->atomic_flags);
}
return 0;
}
/**
* ima_file_mmap - based on policy, collect/store measurement.
* @file: pointer to the file to be measured (May be NULL)
* @prot: contains the protection that will be applied by the kernel.
*
* Measure files being mmapped executable based on the ima_must_measure()
* policy decision.
*
* On success return 0. On integrity appraisal error, assuming the file
* is in policy and IMA-appraisal is in enforcing mode, return -EACCES.
*/
int ima_file_mmap(struct file *file, unsigned long prot)
{
u32 secid;
if (file && (prot & PROT_EXEC)) {
security_task_getsecid(current, &secid);
return process_measurement(file, current_cred(), secid, NULL,
0, MAY_EXEC, MMAP_CHECK);
}
return 0;
}
/**
* ima_bprm_check - based on policy, collect/store measurement.
* @bprm: contains the linux_binprm structure
*
* The OS protects against an executable file, already open for write,
* from being executed in deny_write_access() and an executable file,
* already open for execute, from being modified in get_write_access().
* So we can be certain that what we verify and measure here is actually
* what is being executed.
*
* On success return 0. On integrity appraisal error, assuming the file
* is in policy and IMA-appraisal is in enforcing mode, return -EACCES.
*/
int ima_bprm_check(struct linux_binprm *bprm)
{
int ret;
u32 secid;
security_task_getsecid(current, &secid);
ret = process_measurement(bprm->file, current_cred(), secid, NULL, 0,
MAY_EXEC, BPRM_CHECK);
if (ret)
return ret;
security_cred_getsecid(bprm->cred, &secid);
return process_measurement(bprm->file, bprm->cred, secid, NULL, 0,
MAY_EXEC, CREDS_CHECK);
}
/**
* ima_path_check - based on policy, collect/store measurement.
* @file: pointer to the file to be measured
* @mask: contains MAY_READ, MAY_WRITE, MAY_EXEC or MAY_APPEND
*
* Measure files based on the ima_must_measure() policy decision.
*
* On success return 0. On integrity appraisal error, assuming the file
* is in policy and IMA-appraisal is in enforcing mode, return -EACCES.
*/
int ima_file_check(struct file *file, int mask)
{
u32 secid;
security_task_getsecid(current, &secid);
return process_measurement(file, current_cred(), secid, NULL, 0,
mask & (MAY_READ | MAY_WRITE | MAY_EXEC |
MAY_APPEND), FILE_CHECK);
}
EXPORT_SYMBOL_GPL(ima_file_check);
/**
* ima_post_create_tmpfile - mark newly created tmpfile as new
* @file : newly created tmpfile
*
* No measuring, appraising or auditing of newly created tmpfiles is needed.
* Skip calling process_measurement(), but indicate which newly, created
* tmpfiles are in policy.
*/
void ima_post_create_tmpfile(struct inode *inode)
{
struct integrity_iint_cache *iint;
int must_appraise;
must_appraise = ima_must_appraise(inode, MAY_ACCESS, FILE_CHECK);
if (!must_appraise)
return;
/* Nothing to do if we can't allocate memory */
iint = integrity_inode_get(inode);
if (!iint)
return;
/* needed for writing the security xattrs */
set_bit(IMA_UPDATE_XATTR, &iint->atomic_flags);
iint->ima_file_status = INTEGRITY_PASS;
}
/**
* ima_post_path_mknod - mark as a new inode
* @dentry: newly created dentry
*
* Mark files created via the mknodat syscall as new, so that the
* file data can be written later.
*/
void ima_post_path_mknod(struct dentry *dentry)
{
struct integrity_iint_cache *iint;
struct inode *inode = dentry->d_inode;
int must_appraise;
must_appraise = ima_must_appraise(inode, MAY_ACCESS, FILE_CHECK);
if (!must_appraise)
return;
/* Nothing to do if we can't allocate memory */
iint = integrity_inode_get(inode);
if (!iint)
return;
/* needed for re-opening empty files */
iint->flags |= IMA_NEW_FILE;
}
/**
* ima_read_file - pre-measure/appraise hook decision based on policy
* @file: pointer to the file to be measured/appraised/audit
* @read_id: caller identifier
*
* Permit reading a file based on policy. The policy rules are written
* in terms of the policy identifier. Appraising the integrity of
* a file requires a file descriptor.
*
* For permission return 0, otherwise return -EACCES.
*/
int ima_read_file(struct file *file, enum kernel_read_file_id read_id)
{
ima: based on policy warn about loading firmware (pre-allocated buffer) Some systems are memory constrained but they need to load very large firmwares. The firmware subsystem allows drivers to request this firmware be loaded from the filesystem, but this requires that the entire firmware be loaded into kernel memory first before it's provided to the driver. This can lead to a situation where we map the firmware twice, once to load the firmware into kernel memory and once to copy the firmware into the final resting place. To resolve this problem, commit a098ecd2fa7d ("firmware: support loading into a pre-allocated buffer") introduced request_firmware_into_buf() API that allows drivers to request firmware be loaded directly into a pre-allocated buffer. Do devices using pre-allocated memory run the risk of the firmware being accessible to the device prior to the completion of IMA's signature verification any more than when using two buffers? (Refer to mailing list discussion[1]). Only on systems with an IOMMU can the access be prevented. As long as the signature verification completes prior to the DMA map is performed, the device can not access the buffer. This implies that the same buffer can not be re-used. Can we ensure the buffer has not been DMA mapped before using the pre-allocated buffer? [1] https://lkml.org/lkml/2018/7/10/56 Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: James Morris <james.morris@microsoft.com>
2018-07-13 12:06:03 -06:00
/*
* READING_FIRMWARE_PREALLOC_BUFFER
*
* Do devices using pre-allocated memory run the risk of the
* firmware being accessible to the device prior to the completion
* of IMA's signature verification any more than when using two
* buffers?
*/
return 0;
}
static const int read_idmap[READING_MAX_ID] = {
ima: support for kexec image and initramfs Add IMA policy support for measuring/appraising the kexec image and initramfs. Two new IMA policy identifiers KEXEC_KERNEL_CHECK and KEXEC_INITRAMFS_CHECK are defined. Example policy rules: measure func=KEXEC_KERNEL_CHECK appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig measure func=KEXEC_INITRAMFS_CHECK appraise func=KEXEC_INITRAMFS_CHECK appraise_type=imasig Moving the enumeration to the vfs layer simplified the patches, allowing the IMA changes, for the most part, to be separated from the other changes. Unfortunately, passing either a kernel_read_file_id or a ima_hooks enumeration within IMA is messy. Option 1: duplicate kernel_read_file enumeration in ima_hooks enum kernel_read_file_id { ... READING_KEXEC_IMAGE, READING_KEXEC_INITRAMFS, READING_MAX_ID enum ima_hooks { ... KEXEC_KERNEL_CHECK KEXEC_INITRAMFS_CHECK Option 2: define ima_hooks as extension of kernel_read_file eg: enum ima_hooks { FILE_CHECK = READING_MAX_ID, MMAP_CHECK, In order to pass both kernel_read_file_id and ima_hooks values, we would need to specify a struct containing a union. struct caller_id { union { enum ima_hooks func_id; enum kernel_read_file_id read_id; }; }; Option 3: incorportate the ima_hooks enumeration into kernel_read_file_id, perhaps changing the enumeration name. For now, duplicate the new READING_KEXEC_IMAGE/INITRAMFS in the ima_hooks. Changelog v4: - replaced switch statement with a kernel_read_file_id to an ima_hooks id mapping array - Dmitry - renamed ima_hook tokens KEXEC_CHECK and INITRAMFS_CHECK to KEXEC_KERNEL_CHECK and KEXEC_INITRAMFS_CHECK respectively - Dave Young Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Petko Manolov <petkan@mip-labs.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Cc: Dave Young <dyoung@redhat.com>
2016-01-14 18:59:14 -07:00
[READING_FIRMWARE] = FIRMWARE_CHECK,
[READING_FIRMWARE_PREALLOC_BUFFER] = FIRMWARE_CHECK,
ima: support for kexec image and initramfs Add IMA policy support for measuring/appraising the kexec image and initramfs. Two new IMA policy identifiers KEXEC_KERNEL_CHECK and KEXEC_INITRAMFS_CHECK are defined. Example policy rules: measure func=KEXEC_KERNEL_CHECK appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig measure func=KEXEC_INITRAMFS_CHECK appraise func=KEXEC_INITRAMFS_CHECK appraise_type=imasig Moving the enumeration to the vfs layer simplified the patches, allowing the IMA changes, for the most part, to be separated from the other changes. Unfortunately, passing either a kernel_read_file_id or a ima_hooks enumeration within IMA is messy. Option 1: duplicate kernel_read_file enumeration in ima_hooks enum kernel_read_file_id { ... READING_KEXEC_IMAGE, READING_KEXEC_INITRAMFS, READING_MAX_ID enum ima_hooks { ... KEXEC_KERNEL_CHECK KEXEC_INITRAMFS_CHECK Option 2: define ima_hooks as extension of kernel_read_file eg: enum ima_hooks { FILE_CHECK = READING_MAX_ID, MMAP_CHECK, In order to pass both kernel_read_file_id and ima_hooks values, we would need to specify a struct containing a union. struct caller_id { union { enum ima_hooks func_id; enum kernel_read_file_id read_id; }; }; Option 3: incorportate the ima_hooks enumeration into kernel_read_file_id, perhaps changing the enumeration name. For now, duplicate the new READING_KEXEC_IMAGE/INITRAMFS in the ima_hooks. Changelog v4: - replaced switch statement with a kernel_read_file_id to an ima_hooks id mapping array - Dmitry - renamed ima_hook tokens KEXEC_CHECK and INITRAMFS_CHECK to KEXEC_KERNEL_CHECK and KEXEC_INITRAMFS_CHECK respectively - Dave Young Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Petko Manolov <petkan@mip-labs.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Cc: Dave Young <dyoung@redhat.com>
2016-01-14 18:59:14 -07:00
[READING_MODULE] = MODULE_CHECK,
[READING_KEXEC_IMAGE] = KEXEC_KERNEL_CHECK,
[READING_KEXEC_INITRAMFS] = KEXEC_INITRAMFS_CHECK,
[READING_POLICY] = POLICY_CHECK
ima: support for kexec image and initramfs Add IMA policy support for measuring/appraising the kexec image and initramfs. Two new IMA policy identifiers KEXEC_KERNEL_CHECK and KEXEC_INITRAMFS_CHECK are defined. Example policy rules: measure func=KEXEC_KERNEL_CHECK appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig measure func=KEXEC_INITRAMFS_CHECK appraise func=KEXEC_INITRAMFS_CHECK appraise_type=imasig Moving the enumeration to the vfs layer simplified the patches, allowing the IMA changes, for the most part, to be separated from the other changes. Unfortunately, passing either a kernel_read_file_id or a ima_hooks enumeration within IMA is messy. Option 1: duplicate kernel_read_file enumeration in ima_hooks enum kernel_read_file_id { ... READING_KEXEC_IMAGE, READING_KEXEC_INITRAMFS, READING_MAX_ID enum ima_hooks { ... KEXEC_KERNEL_CHECK KEXEC_INITRAMFS_CHECK Option 2: define ima_hooks as extension of kernel_read_file eg: enum ima_hooks { FILE_CHECK = READING_MAX_ID, MMAP_CHECK, In order to pass both kernel_read_file_id and ima_hooks values, we would need to specify a struct containing a union. struct caller_id { union { enum ima_hooks func_id; enum kernel_read_file_id read_id; }; }; Option 3: incorportate the ima_hooks enumeration into kernel_read_file_id, perhaps changing the enumeration name. For now, duplicate the new READING_KEXEC_IMAGE/INITRAMFS in the ima_hooks. Changelog v4: - replaced switch statement with a kernel_read_file_id to an ima_hooks id mapping array - Dmitry - renamed ima_hook tokens KEXEC_CHECK and INITRAMFS_CHECK to KEXEC_KERNEL_CHECK and KEXEC_INITRAMFS_CHECK respectively - Dave Young Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Petko Manolov <petkan@mip-labs.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Cc: Dave Young <dyoung@redhat.com>
2016-01-14 18:59:14 -07:00
};
/**
* ima_post_read_file - in memory collect/appraise/audit measurement
* @file: pointer to the file to be measured/appraised/audit
* @buf: pointer to in memory file contents
* @size: size of in memory file contents
* @read_id: caller identifier
*
* Measure/appraise/audit in memory file based on policy. Policy rules
* are written in terms of a policy identifier.
*
* On success return 0. On integrity appraisal error, assuming the file
* is in policy and IMA-appraisal is in enforcing mode, return -EACCES.
*/
int ima_post_read_file(struct file *file, void *buf, loff_t size,
enum kernel_read_file_id read_id)
{
ima: support for kexec image and initramfs Add IMA policy support for measuring/appraising the kexec image and initramfs. Two new IMA policy identifiers KEXEC_KERNEL_CHECK and KEXEC_INITRAMFS_CHECK are defined. Example policy rules: measure func=KEXEC_KERNEL_CHECK appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig measure func=KEXEC_INITRAMFS_CHECK appraise func=KEXEC_INITRAMFS_CHECK appraise_type=imasig Moving the enumeration to the vfs layer simplified the patches, allowing the IMA changes, for the most part, to be separated from the other changes. Unfortunately, passing either a kernel_read_file_id or a ima_hooks enumeration within IMA is messy. Option 1: duplicate kernel_read_file enumeration in ima_hooks enum kernel_read_file_id { ... READING_KEXEC_IMAGE, READING_KEXEC_INITRAMFS, READING_MAX_ID enum ima_hooks { ... KEXEC_KERNEL_CHECK KEXEC_INITRAMFS_CHECK Option 2: define ima_hooks as extension of kernel_read_file eg: enum ima_hooks { FILE_CHECK = READING_MAX_ID, MMAP_CHECK, In order to pass both kernel_read_file_id and ima_hooks values, we would need to specify a struct containing a union. struct caller_id { union { enum ima_hooks func_id; enum kernel_read_file_id read_id; }; }; Option 3: incorportate the ima_hooks enumeration into kernel_read_file_id, perhaps changing the enumeration name. For now, duplicate the new READING_KEXEC_IMAGE/INITRAMFS in the ima_hooks. Changelog v4: - replaced switch statement with a kernel_read_file_id to an ima_hooks id mapping array - Dmitry - renamed ima_hook tokens KEXEC_CHECK and INITRAMFS_CHECK to KEXEC_KERNEL_CHECK and KEXEC_INITRAMFS_CHECK respectively - Dave Young Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Petko Manolov <petkan@mip-labs.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Cc: Dave Young <dyoung@redhat.com>
2016-01-14 18:59:14 -07:00
enum ima_hooks func;
u32 secid;
if (!file && read_id == READING_FIRMWARE) {
if ((ima_appraise & IMA_APPRAISE_FIRMWARE) &&
(ima_appraise & IMA_APPRAISE_ENFORCE)) {
pr_err("Prevent firmware loading_store.\n");
return -EACCES; /* INTEGRITY_UNKNOWN */
}
return 0;
}
/* permit signed certs */
if (!file && read_id == READING_X509_CERTIFICATE)
return 0;
if (!file || !buf || size == 0) { /* should never happen */
if (ima_appraise & IMA_APPRAISE_ENFORCE)
return -EACCES;
return 0;
}
ima: support for kexec image and initramfs Add IMA policy support for measuring/appraising the kexec image and initramfs. Two new IMA policy identifiers KEXEC_KERNEL_CHECK and KEXEC_INITRAMFS_CHECK are defined. Example policy rules: measure func=KEXEC_KERNEL_CHECK appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig measure func=KEXEC_INITRAMFS_CHECK appraise func=KEXEC_INITRAMFS_CHECK appraise_type=imasig Moving the enumeration to the vfs layer simplified the patches, allowing the IMA changes, for the most part, to be separated from the other changes. Unfortunately, passing either a kernel_read_file_id or a ima_hooks enumeration within IMA is messy. Option 1: duplicate kernel_read_file enumeration in ima_hooks enum kernel_read_file_id { ... READING_KEXEC_IMAGE, READING_KEXEC_INITRAMFS, READING_MAX_ID enum ima_hooks { ... KEXEC_KERNEL_CHECK KEXEC_INITRAMFS_CHECK Option 2: define ima_hooks as extension of kernel_read_file eg: enum ima_hooks { FILE_CHECK = READING_MAX_ID, MMAP_CHECK, In order to pass both kernel_read_file_id and ima_hooks values, we would need to specify a struct containing a union. struct caller_id { union { enum ima_hooks func_id; enum kernel_read_file_id read_id; }; }; Option 3: incorportate the ima_hooks enumeration into kernel_read_file_id, perhaps changing the enumeration name. For now, duplicate the new READING_KEXEC_IMAGE/INITRAMFS in the ima_hooks. Changelog v4: - replaced switch statement with a kernel_read_file_id to an ima_hooks id mapping array - Dmitry - renamed ima_hook tokens KEXEC_CHECK and INITRAMFS_CHECK to KEXEC_KERNEL_CHECK and KEXEC_INITRAMFS_CHECK respectively - Dave Young Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Petko Manolov <petkan@mip-labs.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Cc: Dave Young <dyoung@redhat.com>
2016-01-14 18:59:14 -07:00
func = read_idmap[read_id] ?: FILE_CHECK;
security_task_getsecid(current, &secid);
return process_measurement(file, current_cred(), secid, buf, size,
MAY_READ, func);
}
/**
* ima_load_data - appraise decision based on policy
* @id: kernel load data caller identifier
*
* Callers of this LSM hook can not measure, appraise, or audit the
* data provided by userspace. Enforce policy rules requring a file
* signature (eg. kexec'ed kernel image).
*
* For permission return 0, otherwise return -EACCES.
*/
int ima_load_data(enum kernel_load_data_id id)
{
bool ima_enforce, sig_enforce;
ima_enforce =
(ima_appraise & IMA_APPRAISE_ENFORCE) == IMA_APPRAISE_ENFORCE;
switch (id) {
case LOADING_KEXEC_IMAGE:
if (IS_ENABLED(CONFIG_KEXEC_VERIFY_SIG)
&& arch_ima_get_secureboot()) {
pr_err("impossible to appraise a kernel image without a file descriptor; try using kexec_file_load syscall.\n");
return -EACCES;
}
if (ima_enforce && (ima_appraise & IMA_APPRAISE_KEXEC)) {
pr_err("impossible to appraise a kernel image without a file descriptor; try using kexec_file_load syscall.\n");
return -EACCES; /* INTEGRITY_UNKNOWN */
}
break;
case LOADING_FIRMWARE:
if (ima_enforce && (ima_appraise & IMA_APPRAISE_FIRMWARE)) {
pr_err("Prevent firmware sysfs fallback loading.\n");
return -EACCES; /* INTEGRITY_UNKNOWN */
}
break;
case LOADING_MODULE:
sig_enforce = is_module_sig_enforced();
if (ima_enforce && (!sig_enforce
&& (ima_appraise & IMA_APPRAISE_MODULES))) {
pr_err("impossible to appraise a module without a file descriptor. sig_enforce kernel parameter might help\n");
return -EACCES; /* INTEGRITY_UNKNOWN */
}
default:
break;
}
return 0;
}
/*
* process_buffer_measurement - Measure the buffer to ima log.
* @buf: pointer to the buffer that needs to be added to the log.
* @size: size of buffer(in bytes).
* @eventname: event name to be used for the buffer entry.
* @cred: a pointer to a credentials structure for user validation.
* @secid: the secid of the task to be validated.
*
* Based on policy, the buffer is measured into the ima log.
*/
static void process_buffer_measurement(const void *buf, int size,
const char *eventname,
const struct cred *cred, u32 secid)
{
int ret = 0;
struct ima_template_entry *entry = NULL;
struct integrity_iint_cache iint = {};
struct ima_event_data event_data = {.iint = &iint,
.filename = eventname,
.buf = buf,
.buf_len = size};
struct ima_template_desc *template_desc = NULL;
struct {
struct ima_digest_data hdr;
char digest[IMA_MAX_DIGEST_SIZE];
} hash = {};
int violation = 0;
int pcr = CONFIG_IMA_MEASURE_PCR_IDX;
int action = 0;
action = ima_get_action(NULL, cred, secid, 0, KEXEC_CMDLINE, &pcr,
&template_desc);
if (!(action & IMA_MEASURE))
return;
iint.ima_hash = &hash.hdr;
iint.ima_hash->algo = ima_hash_algo;
iint.ima_hash->length = hash_digest_size[ima_hash_algo];
ret = ima_calc_buffer_hash(buf, size, iint.ima_hash);
if (ret < 0)
goto out;
ret = ima_alloc_init_template(&event_data, &entry, template_desc);
if (ret < 0)
goto out;
ret = ima_store_template(entry, violation, NULL, buf, pcr);
if (ret < 0)
ima_free_template_entry(entry);
out:
return;
}
/**
* ima_kexec_cmdline - measure kexec cmdline boot args
* @buf: pointer to buffer
* @size: size of buffer
*
* Buffers can only be measured, not appraised.
*/
void ima_kexec_cmdline(const void *buf, int size)
{
u32 secid;
if (buf && size != 0) {
security_task_getsecid(current, &secid);
process_buffer_measurement(buf, size, "kexec-cmdline",
current_cred(), secid);
}
}
static int __init init_ima(void)
{
int error;
ima_init_template_list();
hash_setup(CONFIG_IMA_DEFAULT_HASH);
error = ima_init();
ima: Fallback to the builtin hash algorithm IMA requires having it's hash algorithm be compiled-in due to it's early use. The default IMA algorithm is protected by Kconfig to be compiled-in. The ima_hash kernel parameter allows to choose the hash algorithm. When the specified algorithm is not available or available as a module, IMA initialization fails, which leads to a kernel panic (mknodat syscall calls ima_post_path_mknod()). Therefore as fallback we force IMA to use the default builtin Kconfig hash algorithm. Fixed crash: $ grep CONFIG_CRYPTO_MD4 .config CONFIG_CRYPTO_MD4=m [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-2.3-default root=UUID=74ae8202-9ca7-4e39-813b-22287ec52f7a video=1024x768-16 plymouth.ignore-serial-consoles console=ttyS0 console=tty resume=/dev/disk/by-path/pci-0000:00:07.0-part3 splash=silent showopts ima_hash=md4 ... [ 1.545190] ima: Can not allocate md4 (reason: -2) ... [ 2.610120] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2.611903] IP: ima_match_policy+0x23/0x390 [ 2.612967] PGD 0 P4D 0 [ 2.613080] Oops: 0000 [#1] SMP [ 2.613080] Modules linked in: autofs4 [ 2.613080] Supported: Yes [ 2.613080] CPU: 0 PID: 1 Comm: systemd Not tainted 4.12.14-2.3-default #1 [ 2.613080] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 [ 2.613080] task: ffff88003e2d0040 task.stack: ffffc90000190000 [ 2.613080] RIP: 0010:ima_match_policy+0x23/0x390 [ 2.613080] RSP: 0018:ffffc90000193e88 EFLAGS: 00010296 [ 2.613080] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000004 [ 2.613080] RDX: 0000000000000010 RSI: 0000000000000001 RDI: ffff880037071728 [ 2.613080] RBP: 0000000000008000 R08: 0000000000000000 R09: 0000000000000000 [ 2.613080] R10: 0000000000000008 R11: 61c8864680b583eb R12: 00005580ff10086f [ 2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000008000 [ 2.613080] FS: 00007f5c1da08940(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 2.613080] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.613080] CR2: 0000000000000000 CR3: 0000000037002000 CR4: 00000000003406f0 [ 2.613080] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2.613080] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2.613080] Call Trace: [ 2.613080] ? shmem_mknod+0xbf/0xd0 [ 2.613080] ima_post_path_mknod+0x1c/0x40 [ 2.613080] SyS_mknod+0x210/0x220 [ 2.613080] entry_SYSCALL_64_fastpath+0x1a/0xa5 [ 2.613080] RIP: 0033:0x7f5c1bfde570 [ 2.613080] RSP: 002b:00007ffde1c90dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000085 [ 2.613080] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5c1bfde570 [ 2.613080] RDX: 0000000000000000 RSI: 0000000000008000 RDI: 00005580ff10086f [ 2.613080] RBP: 00007ffde1c91040 R08: 00005580ff10086f R09: 0000000000000000 [ 2.613080] R10: 0000000000104000 R11: 0000000000000246 R12: 00005580ffb99660 [ 2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000002 [ 2.613080] Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 44 8d 14 09 41 55 41 54 55 53 44 89 d3 09 cb 48 83 ec 38 48 8b 05 c5 03 29 01 <4c> 8b 20 4c 39 e0 0f 84 d7 01 00 00 4c 89 44 24 08 89 54 24 20 [ 2.613080] RIP: ima_match_policy+0x23/0x390 RSP: ffffc90000193e88 [ 2.613080] CR2: 0000000000000000 [ 2.613080] ---[ end trace 9a9f0a8a73079f6a ]--- [ 2.673052] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 2.673052] [ 2.675337] Kernel Offset: disabled [ 2.676405] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 Signed-off-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2018-03-23 07:41:08 -06:00
if (error && strcmp(hash_algo_name[ima_hash_algo],
CONFIG_IMA_DEFAULT_HASH) != 0) {
pr_info("Allocating %s failed, going to use default hash algorithm %s\n",
hash_algo_name[ima_hash_algo], CONFIG_IMA_DEFAULT_HASH);
hash_setup_done = 0;
hash_setup(CONFIG_IMA_DEFAULT_HASH);
error = ima_init();
}
error = register_blocking_lsm_notifier(&ima_lsm_policy_notifier);
if (error)
pr_warn("Couldn't register LSM notifier, error %d\n", error);
if (!error)
ima_update_policy_flag();
return error;
}
late_initcall(init_ima); /* Start IMA after the TPM is available */