1
0
Fork 0
alistair23-linux/drivers/input/mouse/synaptics.c

1104 lines
30 KiB
C
Raw Normal View History

/*
* Synaptics TouchPad PS/2 mouse driver
*
* 2003 Dmitry Torokhov <dtor@mail.ru>
* Added support for pass-through port. Special thanks to Peter Berg Larsen
* for explaining various Synaptics quirks.
*
* 2003 Peter Osterlund <petero2@telia.com>
* Ported to 2.5 input device infrastructure.
*
* Copyright (C) 2001 Stefan Gmeiner <riddlebox@freesurf.ch>
* start merging tpconfig and gpm code to a xfree-input module
* adding some changes and extensions (ex. 3rd and 4th button)
*
* Copyright (c) 1997 C. Scott Ananian <cananian@alumni.priceton.edu>
* Copyright (c) 1998-2000 Bruce Kalk <kall@compass.com>
* code for the special synaptics commands (from the tpconfig-source)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* Trademarks are the property of their respective owners.
*/
#include <linux/module.h>
#include <linux/dmi.h>
#include <linux/input/mt.h>
#include <linux/serio.h>
#include <linux/libps2.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
#include <linux/slab.h>
#include "psmouse.h"
#include "synaptics.h"
/*
* The x/y limits are taken from the Synaptics TouchPad interfacing Guide,
* section 2.3.2, which says that they should be valid regardless of the
* actual size of the sensor.
* Note that newer firmware allows querying device for maximum useable
* coordinates.
*/
#define XMIN_NOMINAL 1472
#define XMAX_NOMINAL 5472
#define YMIN_NOMINAL 1408
#define YMAX_NOMINAL 4448
/*
* Synaptics touchpads report the y coordinate from bottom to top, which is
* opposite from what userspace expects.
* This function is used to invert y before reporting.
*/
static int synaptics_invert_y(int y)
{
return YMAX_NOMINAL + YMIN_NOMINAL - y;
}
/*****************************************************************************
* Stuff we need even when we do not want native Synaptics support
****************************************************************************/
/*
* Set the synaptics touchpad mode byte by special commands
*/
static int synaptics_mode_cmd(struct psmouse *psmouse, unsigned char mode)
{
unsigned char param[1];
if (psmouse_sliced_command(psmouse, mode))
return -1;
param[0] = SYN_PS_SET_MODE2;
if (ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_SETRATE))
return -1;
return 0;
}
int synaptics_detect(struct psmouse *psmouse, bool set_properties)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param[4];
param[0] = 0;
ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES);
ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES);
ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES);
ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES);
ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO);
if (param[1] != 0x47)
return -ENODEV;
if (set_properties) {
psmouse->vendor = "Synaptics";
psmouse->name = "TouchPad";
}
return 0;
}
void synaptics_reset(struct psmouse *psmouse)
{
/* reset touchpad back to relative mode, gestures enabled */
synaptics_mode_cmd(psmouse, 0);
}
#ifdef CONFIG_MOUSE_PS2_SYNAPTICS
/*****************************************************************************
* Synaptics communications functions
****************************************************************************/
/*
* Send a command to the synpatics touchpad by special commands
*/
static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c, unsigned char *param)
{
if (psmouse_sliced_command(psmouse, c))
return -1;
if (ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO))
return -1;
return 0;
}
/*
* Read the model-id bytes from the touchpad
* see also SYN_MODEL_* macros
*/
static int synaptics_model_id(struct psmouse *psmouse)
{
struct synaptics_data *priv = psmouse->private;
unsigned char mi[3];
if (synaptics_send_cmd(psmouse, SYN_QUE_MODEL, mi))
return -1;
priv->model_id = (mi[0]<<16) | (mi[1]<<8) | mi[2];
return 0;
}
/*
* Read the capability-bits from the touchpad
* see also the SYN_CAP_* macros
*/
static int synaptics_capability(struct psmouse *psmouse)
{
struct synaptics_data *priv = psmouse->private;
unsigned char cap[3];
if (synaptics_send_cmd(psmouse, SYN_QUE_CAPABILITIES, cap))
return -1;
priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2];
priv->ext_cap = priv->ext_cap_0c = 0;
/*
* Older firmwares had submodel ID fixed to 0x47
*/
if (SYN_ID_FULL(priv->identity) < 0x705 &&
SYN_CAP_SUBMODEL_ID(priv->capabilities) != 0x47) {
return -1;
}
/*
* Unless capExtended is set the rest of the flags should be ignored
*/
if (!SYN_CAP_EXTENDED(priv->capabilities))
priv->capabilities = 0;
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 1) {
if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB, cap)) {
printk(KERN_ERR "Synaptics claims to have extended capabilities,"
" but I'm not able to read them.\n");
} else {
priv->ext_cap = (cap[0] << 16) | (cap[1] << 8) | cap[2];
/*
* if nExtBtn is greater than 8 it should be considered
* invalid and treated as 0
*/
if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) > 8)
priv->ext_cap &= 0xff0fff;
}
}
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 4) {
if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB_0C, cap)) {
printk(KERN_ERR "Synaptics claims to have extended capability 0x0c,"
" but I'm not able to read it.\n");
} else {
priv->ext_cap_0c = (cap[0] << 16) | (cap[1] << 8) | cap[2];
}
}
return 0;
}
/*
* Identify Touchpad
* See also the SYN_ID_* macros
*/
static int synaptics_identify(struct psmouse *psmouse)
{
struct synaptics_data *priv = psmouse->private;
unsigned char id[3];
if (synaptics_send_cmd(psmouse, SYN_QUE_IDENTIFY, id))
return -1;
priv->identity = (id[0]<<16) | (id[1]<<8) | id[2];
if (SYN_ID_IS_SYNAPTICS(priv->identity))
return 0;
return -1;
}
/*
* Read touchpad resolution and maximum reported coordinates
* Resolution is left zero if touchpad does not support the query
*/
static int synaptics_resolution(struct psmouse *psmouse)
{
struct synaptics_data *priv = psmouse->private;
unsigned char resp[3];
if (SYN_ID_MAJOR(priv->identity) < 4)
return 0;
if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, resp) == 0) {
if (resp[0] != 0 && (resp[1] & 0x80) && resp[2] != 0) {
priv->x_res = resp[0]; /* x resolution in units/mm */
priv->y_res = resp[2]; /* y resolution in units/mm */
}
}
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 5 &&
SYN_CAP_MAX_DIMENSIONS(priv->ext_cap_0c)) {
if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MAX_COORDS, resp)) {
printk(KERN_ERR "Synaptics claims to have max coordinates"
" query, but I'm not able to read it.\n");
} else {
priv->x_max = (resp[0] << 5) | ((resp[1] & 0x0f) << 1);
priv->y_max = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3);
}
}
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 &&
SYN_CAP_MIN_DIMENSIONS(priv->ext_cap_0c)) {
if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MIN_COORDS, resp)) {
printk(KERN_ERR "Synaptics claims to have min coordinates"
" query, but I'm not able to read it.\n");
} else {
priv->x_min = (resp[0] << 5) | ((resp[1] & 0x0f) << 1);
priv->y_min = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3);
}
}
return 0;
}
static int synaptics_query_hardware(struct psmouse *psmouse)
{
if (synaptics_identify(psmouse))
return -1;
if (synaptics_model_id(psmouse))
return -1;
if (synaptics_capability(psmouse))
return -1;
if (synaptics_resolution(psmouse))
return -1;
return 0;
}
static int synaptics_set_absolute_mode(struct psmouse *psmouse)
{
struct synaptics_data *priv = psmouse->private;
priv->mode = SYN_BIT_ABSOLUTE_MODE;
if (SYN_ID_MAJOR(priv->identity) >= 4)
priv->mode |= SYN_BIT_DISABLE_GESTURE;
if (SYN_CAP_EXTENDED(priv->capabilities))
priv->mode |= SYN_BIT_W_MODE;
if (synaptics_mode_cmd(psmouse, priv->mode))
return -1;
return 0;
}
static void synaptics_set_rate(struct psmouse *psmouse, unsigned int rate)
{
struct synaptics_data *priv = psmouse->private;
if (rate >= 80) {
priv->mode |= SYN_BIT_HIGH_RATE;
psmouse->rate = 80;
} else {
priv->mode &= ~SYN_BIT_HIGH_RATE;
psmouse->rate = 40;
}
synaptics_mode_cmd(psmouse, priv->mode);
}
static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse)
{
static unsigned char param = 0xc8;
struct synaptics_data *priv = psmouse->private;
Input: synaptics - add image sensor support Synaptics makes (at least) two kinds of touchpad sensors: * Older pads use a profile sensor that could only infer the location of individual fingers based on the projection of their profiles onto row and column sensors. * Newer pads use an image sensor that can track true finger position using a two-dimensional sensor grid. Both sensor types support an "Advanced Gesture Mode": When multiple fingers are detected, the touchpad sends alternating "Advanced Gesture Mode" (AGM) and "Simple Gesture Mode" (SGM) packets. The AGM packets have w=2, and contain reduced resolution finger data The SGM packets have w={0,1} and contain full resolution finger data Profile sensors try to report the "upper" (larger y value) finger in the SGM packet, and the lower (smaller y value) in the AGM packet. However, due to the nature of the profile sensor, they easily get confused when fingers cross, and can start reporting the x-coordinate of one with the y-coordinate of the other. Thus, for profile sensors, "semi-mt" was created, which reports a "bounding box" created by pairing min and max coordinates of the two pairs of reported fingers. Image sensors can report the actual coordinates of two of the fingers present. This patch detects if the touchpad is an image sensor and reports finger data using the MT-B protocol. NOTE: This patch only adds partial support for 2-finger gestures. The proper interpretation of the slot contents when more than two fingers are present is left to later patches. Also, handling of 'number of fingers' transitions is incomplete. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-24 00:02:25 -06:00
if (!(SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)))
return 0;
if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL))
return -1;
if (ps2_command(&psmouse->ps2dev, &param, PSMOUSE_CMD_SETRATE))
return -1;
/* Advanced gesture mode also sends multi finger data */
priv->capabilities |= BIT(1);
return 0;
}
/*****************************************************************************
* Synaptics pass-through PS/2 port support
****************************************************************************/
static int synaptics_pt_write(struct serio *serio, unsigned char c)
{
struct psmouse *parent = serio_get_drvdata(serio->parent);
char rate_param = SYN_PS_CLIENT_CMD; /* indicates that we want pass-through port */
if (psmouse_sliced_command(parent, c))
return -1;
if (ps2_command(&parent->ps2dev, &rate_param, PSMOUSE_CMD_SETRATE))
return -1;
return 0;
}
static int synaptics_pt_start(struct serio *serio)
{
struct psmouse *parent = serio_get_drvdata(serio->parent);
struct synaptics_data *priv = parent->private;
serio_pause_rx(parent->ps2dev.serio);
priv->pt_port = serio;
serio_continue_rx(parent->ps2dev.serio);
return 0;
}
static void synaptics_pt_stop(struct serio *serio)
{
struct psmouse *parent = serio_get_drvdata(serio->parent);
struct synaptics_data *priv = parent->private;
serio_pause_rx(parent->ps2dev.serio);
priv->pt_port = NULL;
serio_continue_rx(parent->ps2dev.serio);
}
static int synaptics_is_pt_packet(unsigned char *buf)
{
return (buf[0] & 0xFC) == 0x84 && (buf[3] & 0xCC) == 0xC4;
}
static void synaptics_pass_pt_packet(struct serio *ptport, unsigned char *packet)
{
struct psmouse *child = serio_get_drvdata(ptport);
if (child && child->state == PSMOUSE_ACTIVATED) {
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 07:55:46 -06:00
serio_interrupt(ptport, packet[1], 0);
serio_interrupt(ptport, packet[4], 0);
serio_interrupt(ptport, packet[5], 0);
if (child->pktsize == 4)
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 07:55:46 -06:00
serio_interrupt(ptport, packet[2], 0);
} else
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 07:55:46 -06:00
serio_interrupt(ptport, packet[1], 0);
}
static void synaptics_pt_activate(struct psmouse *psmouse)
{
struct synaptics_data *priv = psmouse->private;
struct psmouse *child = serio_get_drvdata(priv->pt_port);
/* adjust the touchpad to child's choice of protocol */
if (child) {
if (child->pktsize == 4)
priv->mode |= SYN_BIT_FOUR_BYTE_CLIENT;
else
priv->mode &= ~SYN_BIT_FOUR_BYTE_CLIENT;
if (synaptics_mode_cmd(psmouse, priv->mode))
printk(KERN_INFO "synaptics: failed to switch guest protocol\n");
}
}
static void synaptics_pt_create(struct psmouse *psmouse)
{
struct serio *serio;
serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
if (!serio) {
printk(KERN_ERR "synaptics: not enough memory to allocate pass-through port\n");
return;
}
serio->id.type = SERIO_PS_PSTHRU;
strlcpy(serio->name, "Synaptics pass-through", sizeof(serio->name));
strlcpy(serio->phys, "synaptics-pt/serio0", sizeof(serio->name));
serio->write = synaptics_pt_write;
serio->start = synaptics_pt_start;
serio->stop = synaptics_pt_stop;
serio->parent = psmouse->ps2dev.serio;
psmouse->pt_activate = synaptics_pt_activate;
printk(KERN_INFO "serio: %s port at %s\n", serio->name, psmouse->phys);
serio_register_port(serio);
}
/*****************************************************************************
* Functions to interpret the absolute mode packets
****************************************************************************/
static void synaptics_parse_agm(const unsigned char buf[],
struct synaptics_data *priv)
{
struct synaptics_hw_state *agm = &priv->agm;
/* Gesture packet: (x, y, z) at half resolution */
agm->x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1;
agm->y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1;
agm->z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1;
}
static int synaptics_parse_hw_state(const unsigned char buf[],
struct synaptics_data *priv,
struct synaptics_hw_state *hw)
{
memset(hw, 0, sizeof(struct synaptics_hw_state));
if (SYN_MODEL_NEWABS(priv->model_id)) {
hw->w = (((buf[0] & 0x30) >> 2) |
((buf[0] & 0x04) >> 1) |
((buf[3] & 0x04) >> 2));
hw->left = (buf[0] & 0x01) ? 1 : 0;
hw->right = (buf[0] & 0x02) ? 1 : 0;
if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
/*
* Clickpad's button is transmitted as middle button,
* however, since it is primary button, we will report
* it as BTN_LEFT.
*/
hw->left = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
} else if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) {
hw->middle = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
if (hw->w == 2)
hw->scroll = (signed char)(buf[1]);
}
if (SYN_CAP_FOUR_BUTTON(priv->capabilities)) {
hw->up = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0;
}
Input: synaptics - add image sensor support Synaptics makes (at least) two kinds of touchpad sensors: * Older pads use a profile sensor that could only infer the location of individual fingers based on the projection of their profiles onto row and column sensors. * Newer pads use an image sensor that can track true finger position using a two-dimensional sensor grid. Both sensor types support an "Advanced Gesture Mode": When multiple fingers are detected, the touchpad sends alternating "Advanced Gesture Mode" (AGM) and "Simple Gesture Mode" (SGM) packets. The AGM packets have w=2, and contain reduced resolution finger data The SGM packets have w={0,1} and contain full resolution finger data Profile sensors try to report the "upper" (larger y value) finger in the SGM packet, and the lower (smaller y value) in the AGM packet. However, due to the nature of the profile sensor, they easily get confused when fingers cross, and can start reporting the x-coordinate of one with the y-coordinate of the other. Thus, for profile sensors, "semi-mt" was created, which reports a "bounding box" created by pairing min and max coordinates of the two pairs of reported fingers. Image sensors can report the actual coordinates of two of the fingers present. This patch detects if the touchpad is an image sensor and reports finger data using the MT-B protocol. NOTE: This patch only adds partial support for 2-finger gestures. The proper interpretation of the slot contents when more than two fingers are present is left to later patches. Also, handling of 'number of fingers' transitions is incomplete. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-24 00:02:25 -06:00
if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
hw->w == 2) {
synaptics_parse_agm(buf, priv);
return 1;
}
hw->x = (((buf[3] & 0x10) << 8) |
((buf[1] & 0x0f) << 8) |
buf[4]);
hw->y = (((buf[3] & 0x20) << 7) |
((buf[1] & 0xf0) << 4) |
buf[5]);
hw->z = buf[2];
if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) &&
((buf[0] ^ buf[3]) & 0x02)) {
switch (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) & ~0x01) {
default:
/*
* if nExtBtn is greater than 8 it should be
* considered invalid and treated as 0
*/
break;
case 8:
hw->ext_buttons |= ((buf[5] & 0x08)) ? 0x80 : 0;
hw->ext_buttons |= ((buf[4] & 0x08)) ? 0x40 : 0;
case 6:
hw->ext_buttons |= ((buf[5] & 0x04)) ? 0x20 : 0;
hw->ext_buttons |= ((buf[4] & 0x04)) ? 0x10 : 0;
case 4:
hw->ext_buttons |= ((buf[5] & 0x02)) ? 0x08 : 0;
hw->ext_buttons |= ((buf[4] & 0x02)) ? 0x04 : 0;
case 2:
hw->ext_buttons |= ((buf[5] & 0x01)) ? 0x02 : 0;
hw->ext_buttons |= ((buf[4] & 0x01)) ? 0x01 : 0;
}
}
} else {
hw->x = (((buf[1] & 0x1f) << 8) | buf[2]);
hw->y = (((buf[4] & 0x1f) << 8) | buf[5]);
hw->z = (((buf[0] & 0x30) << 2) | (buf[3] & 0x3F));
hw->w = (((buf[1] & 0x80) >> 4) | ((buf[0] & 0x04) >> 1));
hw->left = (buf[0] & 0x01) ? 1 : 0;
hw->right = (buf[0] & 0x02) ? 1 : 0;
}
return 0;
}
static void synaptics_report_semi_mt_slot(struct input_dev *dev, int slot,
bool active, int x, int y)
{
input_mt_slot(dev, slot);
input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
if (active) {
input_report_abs(dev, ABS_MT_POSITION_X, x);
input_report_abs(dev, ABS_MT_POSITION_Y, synaptics_invert_y(y));
}
}
static void synaptics_report_semi_mt_data(struct input_dev *dev,
const struct synaptics_hw_state *a,
const struct synaptics_hw_state *b,
int num_fingers)
{
if (num_fingers >= 2) {
synaptics_report_semi_mt_slot(dev, 0, true, min(a->x, b->x),
min(a->y, b->y));
synaptics_report_semi_mt_slot(dev, 1, true, max(a->x, b->x),
max(a->y, b->y));
} else if (num_fingers == 1) {
synaptics_report_semi_mt_slot(dev, 0, true, a->x, a->y);
synaptics_report_semi_mt_slot(dev, 1, false, 0, 0);
} else {
synaptics_report_semi_mt_slot(dev, 0, false, 0, 0);
synaptics_report_semi_mt_slot(dev, 1, false, 0, 0);
}
}
Input: synaptics - add image sensor support Synaptics makes (at least) two kinds of touchpad sensors: * Older pads use a profile sensor that could only infer the location of individual fingers based on the projection of their profiles onto row and column sensors. * Newer pads use an image sensor that can track true finger position using a two-dimensional sensor grid. Both sensor types support an "Advanced Gesture Mode": When multiple fingers are detected, the touchpad sends alternating "Advanced Gesture Mode" (AGM) and "Simple Gesture Mode" (SGM) packets. The AGM packets have w=2, and contain reduced resolution finger data The SGM packets have w={0,1} and contain full resolution finger data Profile sensors try to report the "upper" (larger y value) finger in the SGM packet, and the lower (smaller y value) in the AGM packet. However, due to the nature of the profile sensor, they easily get confused when fingers cross, and can start reporting the x-coordinate of one with the y-coordinate of the other. Thus, for profile sensors, "semi-mt" was created, which reports a "bounding box" created by pairing min and max coordinates of the two pairs of reported fingers. Image sensors can report the actual coordinates of two of the fingers present. This patch detects if the touchpad is an image sensor and reports finger data using the MT-B protocol. NOTE: This patch only adds partial support for 2-finger gestures. The proper interpretation of the slot contents when more than two fingers are present is left to later patches. Also, handling of 'number of fingers' transitions is incomplete. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-24 00:02:25 -06:00
static void synaptics_report_buttons(struct psmouse *psmouse,
const struct synaptics_hw_state *hw)
{
struct input_dev *dev = psmouse->dev;
struct synaptics_data *priv = psmouse->private;
int i;
input_report_key(dev, BTN_LEFT, hw->left);
input_report_key(dev, BTN_RIGHT, hw->right);
if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities))
input_report_key(dev, BTN_MIDDLE, hw->middle);
if (SYN_CAP_FOUR_BUTTON(priv->capabilities)) {
input_report_key(dev, BTN_FORWARD, hw->up);
input_report_key(dev, BTN_BACK, hw->down);
}
for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++)
input_report_key(dev, BTN_0 + i, hw->ext_buttons & (1 << i));
}
static void synaptics_report_slot(struct input_dev *dev, int slot,
const struct synaptics_hw_state *hw)
{
input_mt_slot(dev, slot);
input_mt_report_slot_state(dev, MT_TOOL_FINGER, (hw != NULL));
if (!hw)
return;
input_report_abs(dev, ABS_MT_POSITION_X, hw->x);
input_report_abs(dev, ABS_MT_POSITION_Y, synaptics_invert_y(hw->y));
input_report_abs(dev, ABS_MT_PRESSURE, hw->z);
}
static void synaptics_report_mt_data(struct psmouse *psmouse,
int count,
const struct synaptics_hw_state *sgm)
{
struct input_dev *dev = psmouse->dev;
struct synaptics_data *priv = psmouse->private;
struct synaptics_hw_state *agm = &priv->agm;
switch (count) {
case 0:
synaptics_report_slot(dev, 0, NULL);
synaptics_report_slot(dev, 1, NULL);
break;
case 1:
synaptics_report_slot(dev, 0, sgm);
synaptics_report_slot(dev, 1, NULL);
break;
case 2:
case 3: /* Fall-through case */
synaptics_report_slot(dev, 0, sgm);
synaptics_report_slot(dev, 1, agm);
break;
}
/* Don't use active slot count to generate BTN_TOOL events. */
input_mt_report_pointer_emulation(dev, false);
/* Send the number of fingers reported by touchpad itself. */
input_mt_report_finger_count(dev, count);
synaptics_report_buttons(psmouse, sgm);
input_sync(dev);
}
static void synaptics_image_sensor_process(struct psmouse *psmouse,
struct synaptics_hw_state *sgm)
{
int count;
if (sgm->z == 0)
count = 0;
else if (sgm->w >= 4)
count = 1;
else if (sgm->w == 0)
count = 2;
else
count = 3;
/* Send resulting input events to user space */
synaptics_report_mt_data(psmouse, count, sgm);
}
/*
* called for each full received packet from the touchpad
*/
static void synaptics_process_packet(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct synaptics_data *priv = psmouse->private;
struct synaptics_hw_state hw;
int num_fingers;
int finger_width;
if (synaptics_parse_hw_state(psmouse->packet, priv, &hw))
return;
Input: synaptics - add image sensor support Synaptics makes (at least) two kinds of touchpad sensors: * Older pads use a profile sensor that could only infer the location of individual fingers based on the projection of their profiles onto row and column sensors. * Newer pads use an image sensor that can track true finger position using a two-dimensional sensor grid. Both sensor types support an "Advanced Gesture Mode": When multiple fingers are detected, the touchpad sends alternating "Advanced Gesture Mode" (AGM) and "Simple Gesture Mode" (SGM) packets. The AGM packets have w=2, and contain reduced resolution finger data The SGM packets have w={0,1} and contain full resolution finger data Profile sensors try to report the "upper" (larger y value) finger in the SGM packet, and the lower (smaller y value) in the AGM packet. However, due to the nature of the profile sensor, they easily get confused when fingers cross, and can start reporting the x-coordinate of one with the y-coordinate of the other. Thus, for profile sensors, "semi-mt" was created, which reports a "bounding box" created by pairing min and max coordinates of the two pairs of reported fingers. Image sensors can report the actual coordinates of two of the fingers present. This patch detects if the touchpad is an image sensor and reports finger data using the MT-B protocol. NOTE: This patch only adds partial support for 2-finger gestures. The proper interpretation of the slot contents when more than two fingers are present is left to later patches. Also, handling of 'number of fingers' transitions is incomplete. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-24 00:02:25 -06:00
if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) {
synaptics_image_sensor_process(psmouse, &hw);
return;
}
if (hw.scroll) {
priv->scroll += hw.scroll;
while (priv->scroll >= 4) {
input_report_key(dev, BTN_BACK, !hw.down);
input_sync(dev);
input_report_key(dev, BTN_BACK, hw.down);
input_sync(dev);
priv->scroll -= 4;
}
while (priv->scroll <= -4) {
input_report_key(dev, BTN_FORWARD, !hw.up);
input_sync(dev);
input_report_key(dev, BTN_FORWARD, hw.up);
input_sync(dev);
priv->scroll += 4;
}
return;
}
if (hw.z > 0 && hw.x > 1) {
num_fingers = 1;
finger_width = 5;
if (SYN_CAP_EXTENDED(priv->capabilities)) {
switch (hw.w) {
case 0 ... 1:
if (SYN_CAP_MULTIFINGER(priv->capabilities))
num_fingers = hw.w + 2;
break;
case 2:
if (SYN_MODEL_PEN(priv->model_id))
; /* Nothing, treat a pen as a single finger */
break;
case 4 ... 15:
if (SYN_CAP_PALMDETECT(priv->capabilities))
finger_width = hw.w;
break;
}
}
} else {
num_fingers = 0;
finger_width = 0;
}
if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c))
synaptics_report_semi_mt_data(dev, &hw, &priv->agm,
num_fingers);
/* Post events
* BTN_TOUCH has to be first as mousedev relies on it when doing
* absolute -> relative conversion
*/
if (hw.z > 30) input_report_key(dev, BTN_TOUCH, 1);
if (hw.z < 25) input_report_key(dev, BTN_TOUCH, 0);
if (num_fingers > 0) {
input_report_abs(dev, ABS_X, hw.x);
input_report_abs(dev, ABS_Y, synaptics_invert_y(hw.y));
}
input_report_abs(dev, ABS_PRESSURE, hw.z);
if (SYN_CAP_PALMDETECT(priv->capabilities))
input_report_abs(dev, ABS_TOOL_WIDTH, finger_width);
input_report_key(dev, BTN_TOOL_FINGER, num_fingers == 1);
if (SYN_CAP_MULTIFINGER(priv->capabilities)) {
input_report_key(dev, BTN_TOOL_DOUBLETAP, num_fingers == 2);
input_report_key(dev, BTN_TOOL_TRIPLETAP, num_fingers == 3);
}
Input: synaptics - add image sensor support Synaptics makes (at least) two kinds of touchpad sensors: * Older pads use a profile sensor that could only infer the location of individual fingers based on the projection of their profiles onto row and column sensors. * Newer pads use an image sensor that can track true finger position using a two-dimensional sensor grid. Both sensor types support an "Advanced Gesture Mode": When multiple fingers are detected, the touchpad sends alternating "Advanced Gesture Mode" (AGM) and "Simple Gesture Mode" (SGM) packets. The AGM packets have w=2, and contain reduced resolution finger data The SGM packets have w={0,1} and contain full resolution finger data Profile sensors try to report the "upper" (larger y value) finger in the SGM packet, and the lower (smaller y value) in the AGM packet. However, due to the nature of the profile sensor, they easily get confused when fingers cross, and can start reporting the x-coordinate of one with the y-coordinate of the other. Thus, for profile sensors, "semi-mt" was created, which reports a "bounding box" created by pairing min and max coordinates of the two pairs of reported fingers. Image sensors can report the actual coordinates of two of the fingers present. This patch detects if the touchpad is an image sensor and reports finger data using the MT-B protocol. NOTE: This patch only adds partial support for 2-finger gestures. The proper interpretation of the slot contents when more than two fingers are present is left to later patches. Also, handling of 'number of fingers' transitions is incomplete. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-24 00:02:25 -06:00
synaptics_report_buttons(psmouse, &hw);
input_sync(dev);
}
static int synaptics_validate_byte(unsigned char packet[], int idx, unsigned char pkt_type)
{
static const unsigned char newabs_mask[] = { 0xC8, 0x00, 0x00, 0xC8, 0x00 };
static const unsigned char newabs_rel_mask[] = { 0xC0, 0x00, 0x00, 0xC0, 0x00 };
static const unsigned char newabs_rslt[] = { 0x80, 0x00, 0x00, 0xC0, 0x00 };
static const unsigned char oldabs_mask[] = { 0xC0, 0x60, 0x00, 0xC0, 0x60 };
static const unsigned char oldabs_rslt[] = { 0xC0, 0x00, 0x00, 0x80, 0x00 };
if (idx < 0 || idx > 4)
return 0;
switch (pkt_type) {
case SYN_NEWABS:
case SYN_NEWABS_RELAXED:
return (packet[idx] & newabs_rel_mask[idx]) == newabs_rslt[idx];
case SYN_NEWABS_STRICT:
return (packet[idx] & newabs_mask[idx]) == newabs_rslt[idx];
case SYN_OLDABS:
return (packet[idx] & oldabs_mask[idx]) == oldabs_rslt[idx];
default:
printk(KERN_ERR "synaptics: unknown packet type %d\n", pkt_type);
return 0;
}
}
static unsigned char synaptics_detect_pkt_type(struct psmouse *psmouse)
{
int i;
for (i = 0; i < 5; i++)
if (!synaptics_validate_byte(psmouse->packet, i, SYN_NEWABS_STRICT)) {
printk(KERN_INFO "synaptics: using relaxed packet validation\n");
return SYN_NEWABS_RELAXED;
}
return SYN_NEWABS_STRICT;
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 07:55:46 -06:00
static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse)
{
struct synaptics_data *priv = psmouse->private;
if (psmouse->pktcnt >= 6) { /* Full packet received */
if (unlikely(priv->pkt_type == SYN_NEWABS))
priv->pkt_type = synaptics_detect_pkt_type(psmouse);
if (SYN_CAP_PASS_THROUGH(priv->capabilities) &&
synaptics_is_pt_packet(psmouse->packet)) {
if (priv->pt_port)
synaptics_pass_pt_packet(priv->pt_port, psmouse->packet);
} else
synaptics_process_packet(psmouse);
return PSMOUSE_FULL_PACKET;
}
return synaptics_validate_byte(psmouse->packet, psmouse->pktcnt - 1, priv->pkt_type) ?
PSMOUSE_GOOD_DATA : PSMOUSE_BAD_DATA;
}
/*****************************************************************************
* Driver initialization/cleanup functions
****************************************************************************/
static void set_abs_position_params(struct input_dev *dev,
struct synaptics_data *priv, int x_code,
int y_code)
{
int x_min = priv->x_min ?: XMIN_NOMINAL;
int x_max = priv->x_max ?: XMAX_NOMINAL;
int y_min = priv->y_min ?: YMIN_NOMINAL;
int y_max = priv->y_max ?: YMAX_NOMINAL;
int fuzz = SYN_CAP_REDUCED_FILTERING(priv->ext_cap_0c) ?
SYN_REDUCED_FILTER_FUZZ : 0;
input_set_abs_params(dev, x_code, x_min, x_max, fuzz, 0);
input_set_abs_params(dev, y_code, y_min, y_max, fuzz, 0);
input_abs_set_res(dev, x_code, priv->x_res);
input_abs_set_res(dev, y_code, priv->y_res);
}
static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
{
int i;
__set_bit(INPUT_PROP_POINTER, dev->propbit);
__set_bit(EV_ABS, dev->evbit);
set_abs_position_params(dev, priv, ABS_X, ABS_Y);
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
Input: synaptics - add image sensor support Synaptics makes (at least) two kinds of touchpad sensors: * Older pads use a profile sensor that could only infer the location of individual fingers based on the projection of their profiles onto row and column sensors. * Newer pads use an image sensor that can track true finger position using a two-dimensional sensor grid. Both sensor types support an "Advanced Gesture Mode": When multiple fingers are detected, the touchpad sends alternating "Advanced Gesture Mode" (AGM) and "Simple Gesture Mode" (SGM) packets. The AGM packets have w=2, and contain reduced resolution finger data The SGM packets have w={0,1} and contain full resolution finger data Profile sensors try to report the "upper" (larger y value) finger in the SGM packet, and the lower (smaller y value) in the AGM packet. However, due to the nature of the profile sensor, they easily get confused when fingers cross, and can start reporting the x-coordinate of one with the y-coordinate of the other. Thus, for profile sensors, "semi-mt" was created, which reports a "bounding box" created by pairing min and max coordinates of the two pairs of reported fingers. Image sensors can report the actual coordinates of two of the fingers present. This patch detects if the touchpad is an image sensor and reports finger data using the MT-B protocol. NOTE: This patch only adds partial support for 2-finger gestures. The proper interpretation of the slot contents when more than two fingers are present is left to later patches. Also, handling of 'number of fingers' transitions is incomplete. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-24 00:02:25 -06:00
if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) {
input_mt_init_slots(dev, 2);
set_abs_position_params(dev, priv, ABS_MT_POSITION_X,
ABS_MT_POSITION_Y);
/* Image sensors can report per-contact pressure */
input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
} else if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) {
/* Non-image sensors with AGM use semi-mt */
__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
input_mt_init_slots(dev, 2);
set_abs_position_params(dev, priv, ABS_MT_POSITION_X,
ABS_MT_POSITION_Y);
}
if (SYN_CAP_PALMDETECT(priv->capabilities))
input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
__set_bit(EV_KEY, dev->evbit);
__set_bit(BTN_TOUCH, dev->keybit);
__set_bit(BTN_TOOL_FINGER, dev->keybit);
__set_bit(BTN_LEFT, dev->keybit);
__set_bit(BTN_RIGHT, dev->keybit);
if (SYN_CAP_MULTIFINGER(priv->capabilities)) {
__set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
__set_bit(BTN_TOOL_TRIPLETAP, dev->keybit);
}
if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities))
__set_bit(BTN_MIDDLE, dev->keybit);
if (SYN_CAP_FOUR_BUTTON(priv->capabilities) ||
SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) {
__set_bit(BTN_FORWARD, dev->keybit);
__set_bit(BTN_BACK, dev->keybit);
}
for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++)
__set_bit(BTN_0 + i, dev->keybit);
__clear_bit(EV_REL, dev->evbit);
__clear_bit(REL_X, dev->relbit);
__clear_bit(REL_Y, dev->relbit);
if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
/* Clickpads report only left button */
__clear_bit(BTN_RIGHT, dev->keybit);
__clear_bit(BTN_MIDDLE, dev->keybit);
}
}
static void synaptics_disconnect(struct psmouse *psmouse)
{
synaptics_reset(psmouse);
kfree(psmouse->private);
psmouse->private = NULL;
}
static int synaptics_reconnect(struct psmouse *psmouse)
{
struct synaptics_data *priv = psmouse->private;
struct synaptics_data old_priv = *priv;
int retry = 0;
int error;
do {
psmouse_reset(psmouse);
error = synaptics_detect(psmouse, 0);
} while (error && ++retry < 3);
if (error)
return -1;
if (retry > 1)
printk(KERN_DEBUG "Synaptics reconnected after %d tries\n",
retry);
if (synaptics_query_hardware(psmouse)) {
printk(KERN_ERR "Unable to query Synaptics hardware.\n");
return -1;
}
if (synaptics_set_absolute_mode(psmouse)) {
printk(KERN_ERR "Unable to initialize Synaptics hardware.\n");
return -1;
}
if (synaptics_set_advanced_gesture_mode(psmouse)) {
printk(KERN_ERR "Advanced gesture mode reconnect failed.\n");
return -1;
}
if (old_priv.identity != priv->identity ||
old_priv.model_id != priv->model_id ||
old_priv.capabilities != priv->capabilities ||
old_priv.ext_cap != priv->ext_cap) {
printk(KERN_ERR "Synaptics hardware appears to be different: "
"id(%ld-%ld), model(%ld-%ld), caps(%lx-%lx), ext(%lx-%lx).\n",
old_priv.identity, priv->identity,
old_priv.model_id, priv->model_id,
old_priv.capabilities, priv->capabilities,
old_priv.ext_cap, priv->ext_cap);
return -1;
}
return 0;
}
static bool impaired_toshiba_kbc;
static const struct dmi_system_id __initconst toshiba_dmi_table[] = {
#if defined(CONFIG_DMI) && defined(CONFIG_X86)
{
/* Toshiba Satellite */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "Satellite"),
},
},
{
/* Toshiba Dynabook */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "dynabook"),
},
},
{
/* Toshiba Portege M300 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M300"),
},
},
{
/* Toshiba Portege M300 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "Portable PC"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Version 1.0"),
},
},
#endif
{ }
};
static bool broken_olpc_ec;
static const struct dmi_system_id __initconst olpc_dmi_table[] = {
#if defined(CONFIG_DMI) && defined(CONFIG_OLPC)
{
/* OLPC XO-1 or XO-1.5 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "OLPC"),
DMI_MATCH(DMI_PRODUCT_NAME, "XO"),
},
},
#endif
{ }
};
void __init synaptics_module_init(void)
{
impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table);
broken_olpc_ec = dmi_check_system(olpc_dmi_table);
}
int synaptics_init(struct psmouse *psmouse)
{
struct synaptics_data *priv;
/*
* The OLPC XO has issues with Synaptics' absolute mode; similarly to
* the HGPK, it quickly degrades and the hardware becomes jumpy and
* overly sensitive. Not only that, but the constant packet spew
* (even at a lowered 40pps rate) overloads the EC such that key
* presses on the keyboard are missed. Given all of that, don't
* even attempt to use Synaptics mode. Relative mode seems to work
* just fine.
*/
if (broken_olpc_ec) {
printk(KERN_INFO "synaptics: OLPC XO detected, not enabling Synaptics protocol.\n");
return -ENODEV;
}
psmouse->private = priv = kzalloc(sizeof(struct synaptics_data), GFP_KERNEL);
if (!priv)
return -ENOMEM;
psmouse_reset(psmouse);
if (synaptics_query_hardware(psmouse)) {
printk(KERN_ERR "Unable to query Synaptics hardware.\n");
goto init_fail;
}
if (synaptics_set_absolute_mode(psmouse)) {
printk(KERN_ERR "Unable to initialize Synaptics hardware.\n");
goto init_fail;
}
if (synaptics_set_advanced_gesture_mode(psmouse)) {
printk(KERN_ERR "Advanced gesture mode init failed.\n");
goto init_fail;
}
priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
SYN_ID_MODEL(priv->identity),
SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
priv->model_id, priv->capabilities, priv->ext_cap, priv->ext_cap_0c);
set_input_params(psmouse->dev, priv);
/*
* Encode touchpad model so that it can be used to set
* input device->id.version and be visible to userspace.
* Because version is __u16 we have to drop something.
* Hardware info bits seem to be good candidates as they
* are documented to be for Synaptics corp. internal use.
*/
psmouse->model = ((priv->model_id & 0x00ff0000) >> 8) |
(priv->model_id & 0x000000ff);
psmouse->protocol_handler = synaptics_process_byte;
psmouse->set_rate = synaptics_set_rate;
psmouse->disconnect = synaptics_disconnect;
psmouse->reconnect = synaptics_reconnect;
psmouse->cleanup = synaptics_reset;
psmouse->pktsize = 6;
/* Synaptics can usually stay in sync without extra help */
psmouse->resync_time = 0;
if (SYN_CAP_PASS_THROUGH(priv->capabilities))
synaptics_pt_create(psmouse);
/*
* Toshiba's KBC seems to have trouble handling data from
* Synaptics at full rate. Switch to a lower rate (roughly
* the same rate as a standard PS/2 mouse).
*/
if (psmouse->rate >= 80 && impaired_toshiba_kbc) {
printk(KERN_INFO "synaptics: Toshiba %s detected, limiting rate to 40pps.\n",
dmi_get_system_info(DMI_PRODUCT_NAME));
psmouse->rate = 40;
}
return 0;
init_fail:
kfree(priv);
return -1;
}
bool synaptics_supported(void)
{
return true;
}
#else /* CONFIG_MOUSE_PS2_SYNAPTICS */
void __init synaptics_module_init(void)
{
}
int synaptics_init(struct psmouse *psmouse)
{
return -ENOSYS;
}
bool synaptics_supported(void)
{
return false;
}
#endif /* CONFIG_MOUSE_PS2_SYNAPTICS */