1
0
Fork 0
alistair23-linux/drivers/gpu/drm/i915/intel_pm.c

10006 lines
284 KiB
C
Raw Normal View History

/*
* Copyright © 2012 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Eugeni Dodonov <eugeni.dodonov@intel.com>
*
*/
#include <linux/cpufreq.h>
#include <linux/pm_runtime.h>
#include <drm/drm_plane_helper.h>
#include "i915_drv.h"
#include "intel_drv.h"
#include "../../../platform/x86/intel_ips.h"
#include <linux/module.h>
#include <drm/drm_atomic_helper.h>
/**
* DOC: RC6
*
* RC6 is a special power stage which allows the GPU to enter an very
* low-voltage mode when idle, using down to 0V while at this stage. This
* stage is entered automatically when the GPU is idle when RC6 support is
* enabled, and as soon as new workload arises GPU wakes up automatically as well.
*
* There are different RC6 modes available in Intel GPU, which differentiate
* among each other with the latency required to enter and leave RC6 and
* voltage consumed by the GPU in different states.
*
* The combination of the following flags define which states GPU is allowed
* to enter, while RC6 is the normal RC6 state, RC6p is the deep RC6, and
* RC6pp is deepest RC6. Their support by hardware varies according to the
* GPU, BIOS, chipset and platform. RC6 is usually the safest one and the one
* which brings the most power savings; deeper states save more power, but
* require higher latency to switch to and wake up.
*/
static void gen9_init_clock_gating(struct drm_i915_private *dev_priv)
{
if (HAS_LLC(dev_priv)) {
/*
* WaCompressedResourceDisplayNewHashMode:skl,kbl
* Display WA #0390: skl,kbl
*
* Must match Sampler, Pixel Back End, and Media. See
* WaCompressedResourceSamplerPbeMediaNewHashMode.
*/
I915_WRITE(CHICKEN_PAR1_1,
I915_READ(CHICKEN_PAR1_1) |
SKL_DE_COMPRESSED_HASH_MODE);
}
/* See Bspec note for PSR2_CTL bit 31, Wa#828:skl,bxt,kbl,cfl */
I915_WRITE(CHICKEN_PAR1_1,
I915_READ(CHICKEN_PAR1_1) | SKL_EDP_PSR_FIX_RDWRAP);
/* WaEnableChickenDCPR:skl,bxt,kbl,glk,cfl */
I915_WRITE(GEN8_CHICKEN_DCPR_1,
I915_READ(GEN8_CHICKEN_DCPR_1) | MASK_WAKEMEM);
/* WaFbcTurnOffFbcWatermark:skl,bxt,kbl,cfl */
/* WaFbcWakeMemOn:skl,bxt,kbl,glk,cfl */
I915_WRITE(DISP_ARB_CTL, I915_READ(DISP_ARB_CTL) |
DISP_FBC_WM_DIS |
DISP_FBC_MEMORY_WAKE);
/* WaFbcHighMemBwCorruptionAvoidance:skl,bxt,kbl,cfl */
I915_WRITE(ILK_DPFC_CHICKEN, I915_READ(ILK_DPFC_CHICKEN) |
ILK_DPFC_DISABLE_DUMMY0);
if (IS_SKYLAKE(dev_priv)) {
/* WaDisableDopClockGating */
I915_WRITE(GEN7_MISCCPCTL, I915_READ(GEN7_MISCCPCTL)
& ~GEN7_DOP_CLOCK_GATE_ENABLE);
}
}
static void bxt_init_clock_gating(struct drm_i915_private *dev_priv)
{
gen9_init_clock_gating(dev_priv);
/* WaDisableSDEUnitClockGating:bxt */
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
/*
* FIXME:
* GEN8_HDCUNIT_CLOCK_GATE_DISABLE_HDCREQ applies on 3x6 GT SKUs only.
*/
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
GEN8_HDCUNIT_CLOCK_GATE_DISABLE_HDCREQ);
/*
* Wa: Backlight PWM may stop in the asserted state, causing backlight
* to stay fully on.
*/
I915_WRITE(GEN9_CLKGATE_DIS_0, I915_READ(GEN9_CLKGATE_DIS_0) |
PWM1_GATING_DIS | PWM2_GATING_DIS);
}
static void glk_init_clock_gating(struct drm_i915_private *dev_priv)
{
gen9_init_clock_gating(dev_priv);
/*
* WaDisablePWMClockGating:glk
* Backlight PWM may stop in the asserted state, causing backlight
* to stay fully on.
*/
I915_WRITE(GEN9_CLKGATE_DIS_0, I915_READ(GEN9_CLKGATE_DIS_0) |
PWM1_GATING_DIS | PWM2_GATING_DIS);
/* WaDDIIOTimeout:glk */
if (IS_GLK_REVID(dev_priv, 0, GLK_REVID_A1)) {
u32 val = I915_READ(CHICKEN_MISC_2);
val &= ~(GLK_CL0_PWR_DOWN |
GLK_CL1_PWR_DOWN |
GLK_CL2_PWR_DOWN);
I915_WRITE(CHICKEN_MISC_2, val);
}
}
static void i915_pineview_get_mem_freq(struct drm_i915_private *dev_priv)
{
u32 tmp;
tmp = I915_READ(CLKCFG);
switch (tmp & CLKCFG_FSB_MASK) {
case CLKCFG_FSB_533:
dev_priv->fsb_freq = 533; /* 133*4 */
break;
case CLKCFG_FSB_800:
dev_priv->fsb_freq = 800; /* 200*4 */
break;
case CLKCFG_FSB_667:
dev_priv->fsb_freq = 667; /* 167*4 */
break;
case CLKCFG_FSB_400:
dev_priv->fsb_freq = 400; /* 100*4 */
break;
}
switch (tmp & CLKCFG_MEM_MASK) {
case CLKCFG_MEM_533:
dev_priv->mem_freq = 533;
break;
case CLKCFG_MEM_667:
dev_priv->mem_freq = 667;
break;
case CLKCFG_MEM_800:
dev_priv->mem_freq = 800;
break;
}
/* detect pineview DDR3 setting */
tmp = I915_READ(CSHRDDR3CTL);
dev_priv->is_ddr3 = (tmp & CSHRDDR3CTL_DDR3) ? 1 : 0;
}
static void i915_ironlake_get_mem_freq(struct drm_i915_private *dev_priv)
{
u16 ddrpll, csipll;
ddrpll = I915_READ16(DDRMPLL1);
csipll = I915_READ16(CSIPLL0);
switch (ddrpll & 0xff) {
case 0xc:
dev_priv->mem_freq = 800;
break;
case 0x10:
dev_priv->mem_freq = 1066;
break;
case 0x14:
dev_priv->mem_freq = 1333;
break;
case 0x18:
dev_priv->mem_freq = 1600;
break;
default:
DRM_DEBUG_DRIVER("unknown memory frequency 0x%02x\n",
ddrpll & 0xff);
dev_priv->mem_freq = 0;
break;
}
dev_priv->ips.r_t = dev_priv->mem_freq;
switch (csipll & 0x3ff) {
case 0x00c:
dev_priv->fsb_freq = 3200;
break;
case 0x00e:
dev_priv->fsb_freq = 3733;
break;
case 0x010:
dev_priv->fsb_freq = 4266;
break;
case 0x012:
dev_priv->fsb_freq = 4800;
break;
case 0x014:
dev_priv->fsb_freq = 5333;
break;
case 0x016:
dev_priv->fsb_freq = 5866;
break;
case 0x018:
dev_priv->fsb_freq = 6400;
break;
default:
DRM_DEBUG_DRIVER("unknown fsb frequency 0x%04x\n",
csipll & 0x3ff);
dev_priv->fsb_freq = 0;
break;
}
if (dev_priv->fsb_freq == 3200) {
dev_priv->ips.c_m = 0;
} else if (dev_priv->fsb_freq > 3200 && dev_priv->fsb_freq <= 4800) {
dev_priv->ips.c_m = 1;
} else {
dev_priv->ips.c_m = 2;
}
}
static const struct cxsr_latency cxsr_latency_table[] = {
{1, 0, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */
{1, 0, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */
{1, 0, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */
{1, 1, 800, 667, 6420, 36420, 6873, 36873}, /* DDR3-667 SC */
{1, 1, 800, 800, 5902, 35902, 6318, 36318}, /* DDR3-800 SC */
{1, 0, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */
{1, 0, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */
{1, 0, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */
{1, 1, 667, 667, 6438, 36438, 6911, 36911}, /* DDR3-667 SC */
{1, 1, 667, 800, 5941, 35941, 6377, 36377}, /* DDR3-800 SC */
{1, 0, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */
{1, 0, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */
{1, 0, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */
{1, 1, 400, 667, 6509, 36509, 7062, 37062}, /* DDR3-667 SC */
{1, 1, 400, 800, 5985, 35985, 6501, 36501}, /* DDR3-800 SC */
{0, 0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */
{0, 0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */
{0, 0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */
{0, 1, 800, 667, 6476, 36476, 6955, 36955}, /* DDR3-667 SC */
{0, 1, 800, 800, 5958, 35958, 6400, 36400}, /* DDR3-800 SC */
{0, 0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */
{0, 0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */
{0, 0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */
{0, 1, 667, 667, 6494, 36494, 6993, 36993}, /* DDR3-667 SC */
{0, 1, 667, 800, 5998, 35998, 6460, 36460}, /* DDR3-800 SC */
{0, 0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */
{0, 0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */
{0, 0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */
{0, 1, 400, 667, 6566, 36566, 7145, 37145}, /* DDR3-667 SC */
{0, 1, 400, 800, 6042, 36042, 6584, 36584}, /* DDR3-800 SC */
};
static const struct cxsr_latency *intel_get_cxsr_latency(bool is_desktop,
bool is_ddr3,
int fsb,
int mem)
{
const struct cxsr_latency *latency;
int i;
if (fsb == 0 || mem == 0)
return NULL;
for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
latency = &cxsr_latency_table[i];
if (is_desktop == latency->is_desktop &&
is_ddr3 == latency->is_ddr3 &&
fsb == latency->fsb_freq && mem == latency->mem_freq)
return latency;
}
DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
return NULL;
}
static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable)
{
u32 val;
mutex_lock(&dev_priv->pcu_lock);
val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2);
if (enable)
val &= ~FORCE_DDR_HIGH_FREQ;
else
val |= FORCE_DDR_HIGH_FREQ;
val &= ~FORCE_DDR_LOW_FREQ;
val |= FORCE_DDR_FREQ_REQ_ACK;
vlv_punit_write(dev_priv, PUNIT_REG_DDR_SETUP2, val);
if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2) &
FORCE_DDR_FREQ_REQ_ACK) == 0, 3))
DRM_ERROR("timed out waiting for Punit DDR DVFS request\n");
mutex_unlock(&dev_priv->pcu_lock);
}
static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable)
{
u32 val;
mutex_lock(&dev_priv->pcu_lock);
val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
if (enable)
val |= DSP_MAXFIFO_PM5_ENABLE;
else
val &= ~DSP_MAXFIFO_PM5_ENABLE;
vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
mutex_unlock(&dev_priv->pcu_lock);
}
#define FW_WM(value, plane) \
(((value) << DSPFW_ ## plane ## _SHIFT) & DSPFW_ ## plane ## _MASK)
static bool _intel_set_memory_cxsr(struct drm_i915_private *dev_priv, bool enable)
{
bool was_enabled;
u32 val;
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
was_enabled = I915_READ(FW_BLC_SELF_VLV) & FW_CSPWRDWNEN;
I915_WRITE(FW_BLC_SELF_VLV, enable ? FW_CSPWRDWNEN : 0);
POSTING_READ(FW_BLC_SELF_VLV);
} else if (IS_G4X(dev_priv) || IS_I965GM(dev_priv)) {
was_enabled = I915_READ(FW_BLC_SELF) & FW_BLC_SELF_EN;
I915_WRITE(FW_BLC_SELF, enable ? FW_BLC_SELF_EN : 0);
POSTING_READ(FW_BLC_SELF);
} else if (IS_PINEVIEW(dev_priv)) {
val = I915_READ(DSPFW3);
was_enabled = val & PINEVIEW_SELF_REFRESH_EN;
if (enable)
val |= PINEVIEW_SELF_REFRESH_EN;
else
val &= ~PINEVIEW_SELF_REFRESH_EN;
I915_WRITE(DSPFW3, val);
POSTING_READ(DSPFW3);
} else if (IS_I945G(dev_priv) || IS_I945GM(dev_priv)) {
was_enabled = I915_READ(FW_BLC_SELF) & FW_BLC_SELF_EN;
val = enable ? _MASKED_BIT_ENABLE(FW_BLC_SELF_EN) :
_MASKED_BIT_DISABLE(FW_BLC_SELF_EN);
I915_WRITE(FW_BLC_SELF, val);
POSTING_READ(FW_BLC_SELF);
} else if (IS_I915GM(dev_priv)) {
/*
* FIXME can't find a bit like this for 915G, and
* and yet it does have the related watermark in
* FW_BLC_SELF. What's going on?
*/
was_enabled = I915_READ(INSTPM) & INSTPM_SELF_EN;
val = enable ? _MASKED_BIT_ENABLE(INSTPM_SELF_EN) :
_MASKED_BIT_DISABLE(INSTPM_SELF_EN);
I915_WRITE(INSTPM, val);
POSTING_READ(INSTPM);
} else {
return false;
}
trace_intel_memory_cxsr(dev_priv, was_enabled, enable);
DRM_DEBUG_KMS("memory self-refresh is %s (was %s)\n",
enableddisabled(enable),
enableddisabled(was_enabled));
return was_enabled;
}
/**
* intel_set_memory_cxsr - Configure CxSR state
* @dev_priv: i915 device
* @enable: Allow vs. disallow CxSR
*
* Allow or disallow the system to enter a special CxSR
* (C-state self refresh) state. What typically happens in CxSR mode
* is that several display FIFOs may get combined into a single larger
* FIFO for a particular plane (so called max FIFO mode) to allow the
* system to defer memory fetches longer, and the memory will enter
* self refresh.
*
* Note that enabling CxSR does not guarantee that the system enter
* this special mode, nor does it guarantee that the system stays
* in that mode once entered. So this just allows/disallows the system
* to autonomously utilize the CxSR mode. Other factors such as core
* C-states will affect when/if the system actually enters/exits the
* CxSR mode.
*
* Note that on VLV/CHV this actually only controls the max FIFO mode,
* and the system is free to enter/exit memory self refresh at any time
* even when the use of CxSR has been disallowed.
*
* While the system is actually in the CxSR/max FIFO mode, some plane
* control registers will not get latched on vblank. Thus in order to
* guarantee the system will respond to changes in the plane registers
* we must always disallow CxSR prior to making changes to those registers.
* Unfortunately the system will re-evaluate the CxSR conditions at
* frame start which happens after vblank start (which is when the plane
* registers would get latched), so we can't proceed with the plane update
* during the same frame where we disallowed CxSR.
*
* Certain platforms also have a deeper HPLL SR mode. Fortunately the
* HPLL SR mode depends on CxSR itself, so we don't have to hand hold
* the hardware w.r.t. HPLL SR when writing to plane registers.
* Disallowing just CxSR is sufficient.
*/
bool intel_set_memory_cxsr(struct drm_i915_private *dev_priv, bool enable)
{
bool ret;
mutex_lock(&dev_priv->wm.wm_mutex);
ret = _intel_set_memory_cxsr(dev_priv, enable);
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
dev_priv->wm.vlv.cxsr = enable;
else if (IS_G4X(dev_priv))
dev_priv->wm.g4x.cxsr = enable;
mutex_unlock(&dev_priv->wm.wm_mutex);
return ret;
}
/*
* Latency for FIFO fetches is dependent on several factors:
* - memory configuration (speed, channels)
* - chipset
* - current MCH state
* It can be fairly high in some situations, so here we assume a fairly
* pessimal value. It's a tradeoff between extra memory fetches (if we
* set this value too high, the FIFO will fetch frequently to stay full)
* and power consumption (set it too low to save power and we might see
* FIFO underruns and display "flicker").
*
* A value of 5us seems to be a good balance; safe for very low end
* platforms but not overly aggressive on lower latency configs.
*/
static const int pessimal_latency_ns = 5000;
#define VLV_FIFO_START(dsparb, dsparb2, lo_shift, hi_shift) \
((((dsparb) >> (lo_shift)) & 0xff) | ((((dsparb2) >> (hi_shift)) & 0x1) << 8))
static void vlv_get_fifo_size(struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
struct vlv_fifo_state *fifo_state = &crtc_state->wm.vlv.fifo_state;
enum pipe pipe = crtc->pipe;
int sprite0_start, sprite1_start;
switch (pipe) {
uint32_t dsparb, dsparb2, dsparb3;
case PIPE_A:
dsparb = I915_READ(DSPARB);
dsparb2 = I915_READ(DSPARB2);
sprite0_start = VLV_FIFO_START(dsparb, dsparb2, 0, 0);
sprite1_start = VLV_FIFO_START(dsparb, dsparb2, 8, 4);
break;
case PIPE_B:
dsparb = I915_READ(DSPARB);
dsparb2 = I915_READ(DSPARB2);
sprite0_start = VLV_FIFO_START(dsparb, dsparb2, 16, 8);
sprite1_start = VLV_FIFO_START(dsparb, dsparb2, 24, 12);
break;
case PIPE_C:
dsparb2 = I915_READ(DSPARB2);
dsparb3 = I915_READ(DSPARB3);
sprite0_start = VLV_FIFO_START(dsparb3, dsparb2, 0, 16);
sprite1_start = VLV_FIFO_START(dsparb3, dsparb2, 8, 20);
break;
default:
MISSING_CASE(pipe);
return;
}
fifo_state->plane[PLANE_PRIMARY] = sprite0_start;
fifo_state->plane[PLANE_SPRITE0] = sprite1_start - sprite0_start;
fifo_state->plane[PLANE_SPRITE1] = 511 - sprite1_start;
fifo_state->plane[PLANE_CURSOR] = 63;
}
static int i9xx_get_fifo_size(struct drm_i915_private *dev_priv,
enum i9xx_plane_id i9xx_plane)
{
uint32_t dsparb = I915_READ(DSPARB);
int size;
size = dsparb & 0x7f;
if (i9xx_plane == PLANE_B)
size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size;
DRM_DEBUG_KMS("FIFO size - (0x%08x) %c: %d\n",
dsparb, plane_name(i9xx_plane), size);
return size;
}
static int i830_get_fifo_size(struct drm_i915_private *dev_priv,
enum i9xx_plane_id i9xx_plane)
{
uint32_t dsparb = I915_READ(DSPARB);
int size;
size = dsparb & 0x1ff;
if (i9xx_plane == PLANE_B)
size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) - size;
size >>= 1; /* Convert to cachelines */
DRM_DEBUG_KMS("FIFO size - (0x%08x) %c: %d\n",
dsparb, plane_name(i9xx_plane), size);
return size;
}
static int i845_get_fifo_size(struct drm_i915_private *dev_priv,
enum i9xx_plane_id i9xx_plane)
{
uint32_t dsparb = I915_READ(DSPARB);
int size;
size = dsparb & 0x7f;
size >>= 2; /* Convert to cachelines */
DRM_DEBUG_KMS("FIFO size - (0x%08x) %c: %d\n",
dsparb, plane_name(i9xx_plane), size);
return size;
}
/* Pineview has different values for various configs */
static const struct intel_watermark_params pineview_display_wm = {
.fifo_size = PINEVIEW_DISPLAY_FIFO,
.max_wm = PINEVIEW_MAX_WM,
.default_wm = PINEVIEW_DFT_WM,
.guard_size = PINEVIEW_GUARD_WM,
.cacheline_size = PINEVIEW_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params pineview_display_hplloff_wm = {
.fifo_size = PINEVIEW_DISPLAY_FIFO,
.max_wm = PINEVIEW_MAX_WM,
.default_wm = PINEVIEW_DFT_HPLLOFF_WM,
.guard_size = PINEVIEW_GUARD_WM,
.cacheline_size = PINEVIEW_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params pineview_cursor_wm = {
.fifo_size = PINEVIEW_CURSOR_FIFO,
.max_wm = PINEVIEW_CURSOR_MAX_WM,
.default_wm = PINEVIEW_CURSOR_DFT_WM,
.guard_size = PINEVIEW_CURSOR_GUARD_WM,
.cacheline_size = PINEVIEW_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params pineview_cursor_hplloff_wm = {
.fifo_size = PINEVIEW_CURSOR_FIFO,
.max_wm = PINEVIEW_CURSOR_MAX_WM,
.default_wm = PINEVIEW_CURSOR_DFT_WM,
.guard_size = PINEVIEW_CURSOR_GUARD_WM,
.cacheline_size = PINEVIEW_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params i965_cursor_wm_info = {
.fifo_size = I965_CURSOR_FIFO,
.max_wm = I965_CURSOR_MAX_WM,
.default_wm = I965_CURSOR_DFT_WM,
.guard_size = 2,
.cacheline_size = I915_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params i945_wm_info = {
.fifo_size = I945_FIFO_SIZE,
.max_wm = I915_MAX_WM,
.default_wm = 1,
.guard_size = 2,
.cacheline_size = I915_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params i915_wm_info = {
.fifo_size = I915_FIFO_SIZE,
.max_wm = I915_MAX_WM,
.default_wm = 1,
.guard_size = 2,
.cacheline_size = I915_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params i830_a_wm_info = {
.fifo_size = I855GM_FIFO_SIZE,
.max_wm = I915_MAX_WM,
.default_wm = 1,
.guard_size = 2,
.cacheline_size = I830_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params i830_bc_wm_info = {
.fifo_size = I855GM_FIFO_SIZE,
.max_wm = I915_MAX_WM/2,
.default_wm = 1,
.guard_size = 2,
.cacheline_size = I830_FIFO_LINE_SIZE,
};
static const struct intel_watermark_params i845_wm_info = {
.fifo_size = I830_FIFO_SIZE,
.max_wm = I915_MAX_WM,
.default_wm = 1,
.guard_size = 2,
.cacheline_size = I830_FIFO_LINE_SIZE,
};
/**
* intel_wm_method1 - Method 1 / "small buffer" watermark formula
* @pixel_rate: Pipe pixel rate in kHz
* @cpp: Plane bytes per pixel
* @latency: Memory wakeup latency in 0.1us units
*
* Compute the watermark using the method 1 or "small buffer"
* formula. The caller may additonally add extra cachelines
* to account for TLB misses and clock crossings.
*
* This method is concerned with the short term drain rate
* of the FIFO, ie. it does not account for blanking periods
* which would effectively reduce the average drain rate across
* a longer period. The name "small" refers to the fact the
* FIFO is relatively small compared to the amount of data
* fetched.
*
* The FIFO level vs. time graph might look something like:
*
* |\ |\
* | \ | \
* __---__---__ (- plane active, _ blanking)
* -> time
*
* or perhaps like this:
*
* |\|\ |\|\
* __----__----__ (- plane active, _ blanking)
* -> time
*
* Returns:
* The watermark in bytes
*/
static unsigned int intel_wm_method1(unsigned int pixel_rate,
unsigned int cpp,
unsigned int latency)
{
uint64_t ret;
ret = (uint64_t) pixel_rate * cpp * latency;
ret = DIV_ROUND_UP_ULL(ret, 10000);
return ret;
}
/**
* intel_wm_method2 - Method 2 / "large buffer" watermark formula
* @pixel_rate: Pipe pixel rate in kHz
* @htotal: Pipe horizontal total
* @width: Plane width in pixels
* @cpp: Plane bytes per pixel
* @latency: Memory wakeup latency in 0.1us units
*
* Compute the watermark using the method 2 or "large buffer"
* formula. The caller may additonally add extra cachelines
* to account for TLB misses and clock crossings.
*
* This method is concerned with the long term drain rate
* of the FIFO, ie. it does account for blanking periods
* which effectively reduce the average drain rate across
* a longer period. The name "large" refers to the fact the
* FIFO is relatively large compared to the amount of data
* fetched.
*
* The FIFO level vs. time graph might look something like:
*
* |\___ |\___
* | \___ | \___
* | \ | \
* __ --__--__--__--__--__--__ (- plane active, _ blanking)
* -> time
*
* Returns:
* The watermark in bytes
*/
static unsigned int intel_wm_method2(unsigned int pixel_rate,
unsigned int htotal,
unsigned int width,
unsigned int cpp,
unsigned int latency)
{
unsigned int ret;
/*
* FIXME remove once all users are computing
* watermarks in the correct place.
*/
if (WARN_ON_ONCE(htotal == 0))
htotal = 1;
ret = (latency * pixel_rate) / (htotal * 10000);
ret = (ret + 1) * width * cpp;
return ret;
}
/**
* intel_calculate_wm - calculate watermark level
* @pixel_rate: pixel clock
* @wm: chip FIFO params
* @fifo_size: size of the FIFO buffer
* @cpp: bytes per pixel
* @latency_ns: memory latency for the platform
*
* Calculate the watermark level (the level at which the display plane will
* start fetching from memory again). Each chip has a different display
* FIFO size and allocation, so the caller needs to figure that out and pass
* in the correct intel_watermark_params structure.
*
* As the pixel clock runs, the FIFO will be drained at a rate that depends
* on the pixel size. When it reaches the watermark level, it'll start
* fetching FIFO line sized based chunks from memory until the FIFO fills
* past the watermark point. If the FIFO drains completely, a FIFO underrun
* will occur, and a display engine hang could result.
*/
static unsigned int intel_calculate_wm(int pixel_rate,
const struct intel_watermark_params *wm,
int fifo_size, int cpp,
unsigned int latency_ns)
{
int entries, wm_size;
/*
* Note: we need to make sure we don't overflow for various clock &
* latency values.
* clocks go from a few thousand to several hundred thousand.
* latency is usually a few thousand
*/
entries = intel_wm_method1(pixel_rate, cpp,
latency_ns / 100);
entries = DIV_ROUND_UP(entries, wm->cacheline_size) +
wm->guard_size;
DRM_DEBUG_KMS("FIFO entries required for mode: %d\n", entries);
wm_size = fifo_size - entries;
DRM_DEBUG_KMS("FIFO watermark level: %d\n", wm_size);
/* Don't promote wm_size to unsigned... */
if (wm_size > wm->max_wm)
wm_size = wm->max_wm;
if (wm_size <= 0)
wm_size = wm->default_wm;
/*
* Bspec seems to indicate that the value shouldn't be lower than
* 'burst size + 1'. Certainly 830 is quite unhappy with low values.
* Lets go for 8 which is the burst size since certain platforms
* already use a hardcoded 8 (which is what the spec says should be
* done).
*/
if (wm_size <= 8)
wm_size = 8;
return wm_size;
}
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
static bool is_disabling(int old, int new, int threshold)
{
return old >= threshold && new < threshold;
}
static bool is_enabling(int old, int new, int threshold)
{
return old < threshold && new >= threshold;
}
static int intel_wm_num_levels(struct drm_i915_private *dev_priv)
{
return dev_priv->wm.max_level + 1;
}
static bool intel_wm_plane_visible(const struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state)
{
struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
/* FIXME check the 'enable' instead */
if (!crtc_state->base.active)
return false;
/*
* Treat cursor with fb as always visible since cursor updates
* can happen faster than the vrefresh rate, and the current
* watermark code doesn't handle that correctly. Cursor updates
* which set/clear the fb or change the cursor size are going
* to get throttled by intel_legacy_cursor_update() to work
* around this problem with the watermark code.
*/
if (plane->id == PLANE_CURSOR)
return plane_state->base.fb != NULL;
else
return plane_state->base.visible;
}
static struct intel_crtc *single_enabled_crtc(struct drm_i915_private *dev_priv)
{
struct intel_crtc *crtc, *enabled = NULL;
for_each_intel_crtc(&dev_priv->drm, crtc) {
if (intel_crtc_active(crtc)) {
if (enabled)
return NULL;
enabled = crtc;
}
}
return enabled;
}
static void pineview_update_wm(struct intel_crtc *unused_crtc)
{
struct drm_i915_private *dev_priv = to_i915(unused_crtc->base.dev);
struct intel_crtc *crtc;
const struct cxsr_latency *latency;
u32 reg;
unsigned int wm;
latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev_priv),
dev_priv->is_ddr3,
dev_priv->fsb_freq,
dev_priv->mem_freq);
if (!latency) {
DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
intel_set_memory_cxsr(dev_priv, false);
return;
}
crtc = single_enabled_crtc(dev_priv);
if (crtc) {
const struct drm_display_mode *adjusted_mode =
&crtc->config->base.adjusted_mode;
const struct drm_framebuffer *fb =
crtc->base.primary->state->fb;
int cpp = fb->format->cpp[0];
int clock = adjusted_mode->crtc_clock;
/* Display SR */
wm = intel_calculate_wm(clock, &pineview_display_wm,
pineview_display_wm.fifo_size,
cpp, latency->display_sr);
reg = I915_READ(DSPFW1);
reg &= ~DSPFW_SR_MASK;
reg |= FW_WM(wm, SR);
I915_WRITE(DSPFW1, reg);
DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg);
/* cursor SR */
wm = intel_calculate_wm(clock, &pineview_cursor_wm,
pineview_display_wm.fifo_size,
4, latency->cursor_sr);
reg = I915_READ(DSPFW3);
reg &= ~DSPFW_CURSOR_SR_MASK;
reg |= FW_WM(wm, CURSOR_SR);
I915_WRITE(DSPFW3, reg);
/* Display HPLL off SR */
wm = intel_calculate_wm(clock, &pineview_display_hplloff_wm,
pineview_display_hplloff_wm.fifo_size,
cpp, latency->display_hpll_disable);
reg = I915_READ(DSPFW3);
reg &= ~DSPFW_HPLL_SR_MASK;
reg |= FW_WM(wm, HPLL_SR);
I915_WRITE(DSPFW3, reg);
/* cursor HPLL off SR */
wm = intel_calculate_wm(clock, &pineview_cursor_hplloff_wm,
pineview_display_hplloff_wm.fifo_size,
4, latency->cursor_hpll_disable);
reg = I915_READ(DSPFW3);
reg &= ~DSPFW_HPLL_CURSOR_MASK;
reg |= FW_WM(wm, HPLL_CURSOR);
I915_WRITE(DSPFW3, reg);
DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg);
intel_set_memory_cxsr(dev_priv, true);
} else {
intel_set_memory_cxsr(dev_priv, false);
}
}
/*
* Documentation says:
* "If the line size is small, the TLB fetches can get in the way of the
* data fetches, causing some lag in the pixel data return which is not
* accounted for in the above formulas. The following adjustment only
* needs to be applied if eight whole lines fit in the buffer at once.
* The WM is adjusted upwards by the difference between the FIFO size
* and the size of 8 whole lines. This adjustment is always performed
* in the actual pixel depth regardless of whether FBC is enabled or not."
*/
static unsigned int g4x_tlb_miss_wa(int fifo_size, int width, int cpp)
{
int tlb_miss = fifo_size * 64 - width * cpp * 8;
return max(0, tlb_miss);
}
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
static void g4x_write_wm_values(struct drm_i915_private *dev_priv,
const struct g4x_wm_values *wm)
{
enum pipe pipe;
for_each_pipe(dev_priv, pipe)
trace_g4x_wm(intel_get_crtc_for_pipe(dev_priv, pipe), wm);
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
I915_WRITE(DSPFW1,
FW_WM(wm->sr.plane, SR) |
FW_WM(wm->pipe[PIPE_B].plane[PLANE_CURSOR], CURSORB) |
FW_WM(wm->pipe[PIPE_B].plane[PLANE_PRIMARY], PLANEB) |
FW_WM(wm->pipe[PIPE_A].plane[PLANE_PRIMARY], PLANEA));
I915_WRITE(DSPFW2,
(wm->fbc_en ? DSPFW_FBC_SR_EN : 0) |
FW_WM(wm->sr.fbc, FBC_SR) |
FW_WM(wm->hpll.fbc, FBC_HPLL_SR) |
FW_WM(wm->pipe[PIPE_B].plane[PLANE_SPRITE0], SPRITEB) |
FW_WM(wm->pipe[PIPE_A].plane[PLANE_CURSOR], CURSORA) |
FW_WM(wm->pipe[PIPE_A].plane[PLANE_SPRITE0], SPRITEA));
I915_WRITE(DSPFW3,
(wm->hpll_en ? DSPFW_HPLL_SR_EN : 0) |
FW_WM(wm->sr.cursor, CURSOR_SR) |
FW_WM(wm->hpll.cursor, HPLL_CURSOR) |
FW_WM(wm->hpll.plane, HPLL_SR));
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
POSTING_READ(DSPFW1);
}
#define FW_WM_VLV(value, plane) \
(((value) << DSPFW_ ## plane ## _SHIFT) & DSPFW_ ## plane ## _MASK_VLV)
static void vlv_write_wm_values(struct drm_i915_private *dev_priv,
const struct vlv_wm_values *wm)
{
enum pipe pipe;
for_each_pipe(dev_priv, pipe) {
trace_vlv_wm(intel_get_crtc_for_pipe(dev_priv, pipe), wm);
I915_WRITE(VLV_DDL(pipe),
(wm->ddl[pipe].plane[PLANE_CURSOR] << DDL_CURSOR_SHIFT) |
(wm->ddl[pipe].plane[PLANE_SPRITE1] << DDL_SPRITE_SHIFT(1)) |
(wm->ddl[pipe].plane[PLANE_SPRITE0] << DDL_SPRITE_SHIFT(0)) |
(wm->ddl[pipe].plane[PLANE_PRIMARY] << DDL_PLANE_SHIFT));
}
/*
* Zero the (unused) WM1 watermarks, and also clear all the
* high order bits so that there are no out of bounds values
* present in the registers during the reprogramming.
*/
I915_WRITE(DSPHOWM, 0);
I915_WRITE(DSPHOWM1, 0);
I915_WRITE(DSPFW4, 0);
I915_WRITE(DSPFW5, 0);
I915_WRITE(DSPFW6, 0);
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-05 12:19:49 -07:00
I915_WRITE(DSPFW1,
FW_WM(wm->sr.plane, SR) |
FW_WM(wm->pipe[PIPE_B].plane[PLANE_CURSOR], CURSORB) |
FW_WM_VLV(wm->pipe[PIPE_B].plane[PLANE_PRIMARY], PLANEB) |
FW_WM_VLV(wm->pipe[PIPE_A].plane[PLANE_PRIMARY], PLANEA));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-05 12:19:49 -07:00
I915_WRITE(DSPFW2,
FW_WM_VLV(wm->pipe[PIPE_A].plane[PLANE_SPRITE1], SPRITEB) |
FW_WM(wm->pipe[PIPE_A].plane[PLANE_CURSOR], CURSORA) |
FW_WM_VLV(wm->pipe[PIPE_A].plane[PLANE_SPRITE0], SPRITEA));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-05 12:19:49 -07:00
I915_WRITE(DSPFW3,
FW_WM(wm->sr.cursor, CURSOR_SR));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-05 12:19:49 -07:00
if (IS_CHERRYVIEW(dev_priv)) {
I915_WRITE(DSPFW7_CHV,
FW_WM_VLV(wm->pipe[PIPE_B].plane[PLANE_SPRITE1], SPRITED) |
FW_WM_VLV(wm->pipe[PIPE_B].plane[PLANE_SPRITE0], SPRITEC));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-05 12:19:49 -07:00
I915_WRITE(DSPFW8_CHV,
FW_WM_VLV(wm->pipe[PIPE_C].plane[PLANE_SPRITE1], SPRITEF) |
FW_WM_VLV(wm->pipe[PIPE_C].plane[PLANE_SPRITE0], SPRITEE));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-05 12:19:49 -07:00
I915_WRITE(DSPFW9_CHV,
FW_WM_VLV(wm->pipe[PIPE_C].plane[PLANE_PRIMARY], PLANEC) |
FW_WM(wm->pipe[PIPE_C].plane[PLANE_CURSOR], CURSORC));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-05 12:19:49 -07:00
I915_WRITE(DSPHOWM,
FW_WM(wm->sr.plane >> 9, SR_HI) |
FW_WM(wm->pipe[PIPE_C].plane[PLANE_SPRITE1] >> 8, SPRITEF_HI) |
FW_WM(wm->pipe[PIPE_C].plane[PLANE_SPRITE0] >> 8, SPRITEE_HI) |
FW_WM(wm->pipe[PIPE_C].plane[PLANE_PRIMARY] >> 8, PLANEC_HI) |
FW_WM(wm->pipe[PIPE_B].plane[PLANE_SPRITE1] >> 8, SPRITED_HI) |
FW_WM(wm->pipe[PIPE_B].plane[PLANE_SPRITE0] >> 8, SPRITEC_HI) |
FW_WM(wm->pipe[PIPE_B].plane[PLANE_PRIMARY] >> 8, PLANEB_HI) |
FW_WM(wm->pipe[PIPE_A].plane[PLANE_SPRITE1] >> 8, SPRITEB_HI) |
FW_WM(wm->pipe[PIPE_A].plane[PLANE_SPRITE0] >> 8, SPRITEA_HI) |
FW_WM(wm->pipe[PIPE_A].plane[PLANE_PRIMARY] >> 8, PLANEA_HI));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-05 12:19:49 -07:00
} else {
I915_WRITE(DSPFW7,
FW_WM_VLV(wm->pipe[PIPE_B].plane[PLANE_SPRITE1], SPRITED) |
FW_WM_VLV(wm->pipe[PIPE_B].plane[PLANE_SPRITE0], SPRITEC));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-05 12:19:49 -07:00
I915_WRITE(DSPHOWM,
FW_WM(wm->sr.plane >> 9, SR_HI) |
FW_WM(wm->pipe[PIPE_B].plane[PLANE_SPRITE1] >> 8, SPRITED_HI) |
FW_WM(wm->pipe[PIPE_B].plane[PLANE_SPRITE0] >> 8, SPRITEC_HI) |
FW_WM(wm->pipe[PIPE_B].plane[PLANE_PRIMARY] >> 8, PLANEB_HI) |
FW_WM(wm->pipe[PIPE_A].plane[PLANE_SPRITE1] >> 8, SPRITEB_HI) |
FW_WM(wm->pipe[PIPE_A].plane[PLANE_SPRITE0] >> 8, SPRITEA_HI) |
FW_WM(wm->pipe[PIPE_A].plane[PLANE_PRIMARY] >> 8, PLANEA_HI));
drm/i915: Rewrite VLV/CHV watermark code Assuming the PND deadline mechanism works reasonably we should do memory requests as early as possible so that PND has schedule the requests more intelligently. Currently we're still calculating the watermarks as if VLV/CHV are identical to g4x, which isn't the case. The current code also seems to calculate insufficient watermarks and hence we're seeing some underruns, especially on high resolution displays. To fix it just rip out the current code and replace is with something that tries to utilize PND as efficiently as possible. We now calculate the WM watermark to trigger when the FIFO still has 256us worth of data. 256us is the maximum deadline value supoorted by PND, so issuing memory requests earlier would mean we probably couldn't utilize the full FIFO as PND would attempt to return the data at least in at least 256us. We also clamp the watermark to at least 8 cachelines as that's the magic watermark that enabling trickle feed would also impose. I'm assuming it matches some burst size. In theory we could just enable trickle feed and ignore the WM values, except trickle feed doesn't work with max fifo mode anyway, so we'd still need to calculate the SR watermarks. It seems cleaner to just disable trickle feed and calculate all watermarks the same way. Also trickle feed wouldn't account for the 256us max deadline value, thoguh that may be a moot point in non-max fifo mode sicne the FIFOs are fairly small. On VLV max fifo mode can be used with either primary or sprite planes. So the code now also checks all the planes (apart from the cursor) when calculating the SR plane watermark. We don't have to worry about the WM1 watermarks since we're using the PND deadline scheme which means the hardware ignores WM1 values. v2: Use plane->state->fb instead of plane->fb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-05 12:19:49 -07:00
}
POSTING_READ(DSPFW1);
}
#undef FW_WM_VLV
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
static void g4x_setup_wm_latency(struct drm_i915_private *dev_priv)
{
/* all latencies in usec */
dev_priv->wm.pri_latency[G4X_WM_LEVEL_NORMAL] = 5;
dev_priv->wm.pri_latency[G4X_WM_LEVEL_SR] = 12;
dev_priv->wm.pri_latency[G4X_WM_LEVEL_HPLL] = 35;
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
dev_priv->wm.max_level = G4X_WM_LEVEL_HPLL;
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
}
static int g4x_plane_fifo_size(enum plane_id plane_id, int level)
{
/*
* DSPCNTR[13] supposedly controls whether the
* primary plane can use the FIFO space otherwise
* reserved for the sprite plane. It's not 100% clear
* what the actual FIFO size is, but it looks like we
* can happily set both primary and sprite watermarks
* up to 127 cachelines. So that would seem to mean
* that either DSPCNTR[13] doesn't do anything, or that
* the total FIFO is >= 256 cachelines in size. Either
* way, we don't seem to have to worry about this
* repartitioning as the maximum watermark value the
* register can hold for each plane is lower than the
* minimum FIFO size.
*/
switch (plane_id) {
case PLANE_CURSOR:
return 63;
case PLANE_PRIMARY:
return level == G4X_WM_LEVEL_NORMAL ? 127 : 511;
case PLANE_SPRITE0:
return level == G4X_WM_LEVEL_NORMAL ? 127 : 0;
default:
MISSING_CASE(plane_id);
return 0;
}
}
static int g4x_fbc_fifo_size(int level)
{
switch (level) {
case G4X_WM_LEVEL_SR:
return 7;
case G4X_WM_LEVEL_HPLL:
return 15;
default:
MISSING_CASE(level);
return 0;
}
}
static uint16_t g4x_compute_wm(const struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state,
int level)
{
struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
const struct drm_display_mode *adjusted_mode =
&crtc_state->base.adjusted_mode;
unsigned int latency = dev_priv->wm.pri_latency[level] * 10;
unsigned int clock, htotal, cpp, width, wm;
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
if (latency == 0)
return USHRT_MAX;
if (!intel_wm_plane_visible(crtc_state, plane_state))
return 0;
/*
* Not 100% sure which way ELK should go here as the
* spec only says CL/CTG should assume 32bpp and BW
* doesn't need to. But as these things followed the
* mobile vs. desktop lines on gen3 as well, let's
* assume ELK doesn't need this.
*
* The spec also fails to list such a restriction for
* the HPLL watermark, which seems a little strange.
* Let's use 32bpp for the HPLL watermark as well.
*/
if (IS_GM45(dev_priv) && plane->id == PLANE_PRIMARY &&
level != G4X_WM_LEVEL_NORMAL)
cpp = 4;
else
cpp = plane_state->base.fb->format->cpp[0];
clock = adjusted_mode->crtc_clock;
htotal = adjusted_mode->crtc_htotal;
if (plane->id == PLANE_CURSOR)
width = plane_state->base.crtc_w;
else
width = drm_rect_width(&plane_state->base.dst);
if (plane->id == PLANE_CURSOR) {
wm = intel_wm_method2(clock, htotal, width, cpp, latency);
} else if (plane->id == PLANE_PRIMARY &&
level == G4X_WM_LEVEL_NORMAL) {
wm = intel_wm_method1(clock, cpp, latency);
} else {
unsigned int small, large;
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
small = intel_wm_method1(clock, cpp, latency);
large = intel_wm_method2(clock, htotal, width, cpp, latency);
wm = min(small, large);
}
wm += g4x_tlb_miss_wa(g4x_plane_fifo_size(plane->id, level),
width, cpp);
wm = DIV_ROUND_UP(wm, 64) + 2;
return min_t(unsigned int, wm, USHRT_MAX);
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
}
static bool g4x_raw_plane_wm_set(struct intel_crtc_state *crtc_state,
int level, enum plane_id plane_id, u16 value)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
bool dirty = false;
for (; level < intel_wm_num_levels(dev_priv); level++) {
struct g4x_pipe_wm *raw = &crtc_state->wm.g4x.raw[level];
dirty |= raw->plane[plane_id] != value;
raw->plane[plane_id] = value;
}
return dirty;
}
static bool g4x_raw_fbc_wm_set(struct intel_crtc_state *crtc_state,
int level, u16 value)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
bool dirty = false;
/* NORMAL level doesn't have an FBC watermark */
level = max(level, G4X_WM_LEVEL_SR);
for (; level < intel_wm_num_levels(dev_priv); level++) {
struct g4x_pipe_wm *raw = &crtc_state->wm.g4x.raw[level];
dirty |= raw->fbc != value;
raw->fbc = value;
}
return dirty;
}
static uint32_t ilk_compute_fbc_wm(const struct intel_crtc_state *cstate,
const struct intel_plane_state *pstate,
uint32_t pri_val);
static bool g4x_raw_plane_wm_compute(struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state)
{
struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
int num_levels = intel_wm_num_levels(to_i915(plane->base.dev));
enum plane_id plane_id = plane->id;
bool dirty = false;
int level;
if (!intel_wm_plane_visible(crtc_state, plane_state)) {
dirty |= g4x_raw_plane_wm_set(crtc_state, 0, plane_id, 0);
if (plane_id == PLANE_PRIMARY)
dirty |= g4x_raw_fbc_wm_set(crtc_state, 0, 0);
goto out;
}
for (level = 0; level < num_levels; level++) {
struct g4x_pipe_wm *raw = &crtc_state->wm.g4x.raw[level];
int wm, max_wm;
wm = g4x_compute_wm(crtc_state, plane_state, level);
max_wm = g4x_plane_fifo_size(plane_id, level);
if (wm > max_wm)
break;
dirty |= raw->plane[plane_id] != wm;
raw->plane[plane_id] = wm;
if (plane_id != PLANE_PRIMARY ||
level == G4X_WM_LEVEL_NORMAL)
continue;
wm = ilk_compute_fbc_wm(crtc_state, plane_state,
raw->plane[plane_id]);
max_wm = g4x_fbc_fifo_size(level);
/*
* FBC wm is not mandatory as we
* can always just disable its use.
*/
if (wm > max_wm)
wm = USHRT_MAX;
dirty |= raw->fbc != wm;
raw->fbc = wm;
}
/* mark watermarks as invalid */
dirty |= g4x_raw_plane_wm_set(crtc_state, level, plane_id, USHRT_MAX);
if (plane_id == PLANE_PRIMARY)
dirty |= g4x_raw_fbc_wm_set(crtc_state, level, USHRT_MAX);
out:
if (dirty) {
DRM_DEBUG_KMS("%s watermarks: normal=%d, SR=%d, HPLL=%d\n",
plane->base.name,
crtc_state->wm.g4x.raw[G4X_WM_LEVEL_NORMAL].plane[plane_id],
crtc_state->wm.g4x.raw[G4X_WM_LEVEL_SR].plane[plane_id],
crtc_state->wm.g4x.raw[G4X_WM_LEVEL_HPLL].plane[plane_id]);
if (plane_id == PLANE_PRIMARY)
DRM_DEBUG_KMS("FBC watermarks: SR=%d, HPLL=%d\n",
crtc_state->wm.g4x.raw[G4X_WM_LEVEL_SR].fbc,
crtc_state->wm.g4x.raw[G4X_WM_LEVEL_HPLL].fbc);
}
return dirty;
}
static bool g4x_raw_plane_wm_is_valid(const struct intel_crtc_state *crtc_state,
enum plane_id plane_id, int level)
{
const struct g4x_pipe_wm *raw = &crtc_state->wm.g4x.raw[level];
return raw->plane[plane_id] <= g4x_plane_fifo_size(plane_id, level);
}
static bool g4x_raw_crtc_wm_is_valid(const struct intel_crtc_state *crtc_state,
int level)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
if (level > dev_priv->wm.max_level)
return false;
return g4x_raw_plane_wm_is_valid(crtc_state, PLANE_PRIMARY, level) &&
g4x_raw_plane_wm_is_valid(crtc_state, PLANE_SPRITE0, level) &&
g4x_raw_plane_wm_is_valid(crtc_state, PLANE_CURSOR, level);
}
/* mark all levels starting from 'level' as invalid */
static void g4x_invalidate_wms(struct intel_crtc *crtc,
struct g4x_wm_state *wm_state, int level)
{
if (level <= G4X_WM_LEVEL_NORMAL) {
enum plane_id plane_id;
for_each_plane_id_on_crtc(crtc, plane_id)
wm_state->wm.plane[plane_id] = USHRT_MAX;
}
if (level <= G4X_WM_LEVEL_SR) {
wm_state->cxsr = false;
wm_state->sr.cursor = USHRT_MAX;
wm_state->sr.plane = USHRT_MAX;
wm_state->sr.fbc = USHRT_MAX;
}
if (level <= G4X_WM_LEVEL_HPLL) {
wm_state->hpll_en = false;
wm_state->hpll.cursor = USHRT_MAX;
wm_state->hpll.plane = USHRT_MAX;
wm_state->hpll.fbc = USHRT_MAX;
}
}
static int g4x_compute_pipe_wm(struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct intel_atomic_state *state =
to_intel_atomic_state(crtc_state->base.state);
struct g4x_wm_state *wm_state = &crtc_state->wm.g4x.optimal;
int num_active_planes = hweight32(crtc_state->active_planes &
~BIT(PLANE_CURSOR));
const struct g4x_pipe_wm *raw;
const struct intel_plane_state *old_plane_state;
const struct intel_plane_state *new_plane_state;
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
struct intel_plane *plane;
enum plane_id plane_id;
int i, level;
unsigned int dirty = 0;
for_each_oldnew_intel_plane_in_state(state, plane,
old_plane_state,
new_plane_state, i) {
if (new_plane_state->base.crtc != &crtc->base &&
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
old_plane_state->base.crtc != &crtc->base)
continue;
if (g4x_raw_plane_wm_compute(crtc_state, new_plane_state))
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
dirty |= BIT(plane->id);
}
if (!dirty)
return 0;
level = G4X_WM_LEVEL_NORMAL;
if (!g4x_raw_crtc_wm_is_valid(crtc_state, level))
goto out;
raw = &crtc_state->wm.g4x.raw[level];
for_each_plane_id_on_crtc(crtc, plane_id)
wm_state->wm.plane[plane_id] = raw->plane[plane_id];
level = G4X_WM_LEVEL_SR;
if (!g4x_raw_crtc_wm_is_valid(crtc_state, level))
goto out;
raw = &crtc_state->wm.g4x.raw[level];
wm_state->sr.plane = raw->plane[PLANE_PRIMARY];
wm_state->sr.cursor = raw->plane[PLANE_CURSOR];
wm_state->sr.fbc = raw->fbc;
wm_state->cxsr = num_active_planes == BIT(PLANE_PRIMARY);
level = G4X_WM_LEVEL_HPLL;
if (!g4x_raw_crtc_wm_is_valid(crtc_state, level))
goto out;
raw = &crtc_state->wm.g4x.raw[level];
wm_state->hpll.plane = raw->plane[PLANE_PRIMARY];
wm_state->hpll.cursor = raw->plane[PLANE_CURSOR];
wm_state->hpll.fbc = raw->fbc;
wm_state->hpll_en = wm_state->cxsr;
level++;
out:
if (level == G4X_WM_LEVEL_NORMAL)
return -EINVAL;
/* invalidate the higher levels */
g4x_invalidate_wms(crtc, wm_state, level);
/*
* Determine if the FBC watermark(s) can be used. IF
* this isn't the case we prefer to disable the FBC
( watermark(s) rather than disable the SR/HPLL
* level(s) entirely.
*/
wm_state->fbc_en = level > G4X_WM_LEVEL_NORMAL;
if (level >= G4X_WM_LEVEL_SR &&
wm_state->sr.fbc > g4x_fbc_fifo_size(G4X_WM_LEVEL_SR))
wm_state->fbc_en = false;
else if (level >= G4X_WM_LEVEL_HPLL &&
wm_state->hpll.fbc > g4x_fbc_fifo_size(G4X_WM_LEVEL_HPLL))
wm_state->fbc_en = false;
return 0;
}
static int g4x_compute_intermediate_wm(struct drm_device *dev,
struct intel_crtc *crtc,
struct intel_crtc_state *new_crtc_state)
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
{
struct g4x_wm_state *intermediate = &new_crtc_state->wm.g4x.intermediate;
const struct g4x_wm_state *optimal = &new_crtc_state->wm.g4x.optimal;
struct intel_atomic_state *intel_state =
to_intel_atomic_state(new_crtc_state->base.state);
const struct intel_crtc_state *old_crtc_state =
intel_atomic_get_old_crtc_state(intel_state, crtc);
const struct g4x_wm_state *active = &old_crtc_state->wm.g4x.optimal;
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
enum plane_id plane_id;
if (!new_crtc_state->base.active || drm_atomic_crtc_needs_modeset(&new_crtc_state->base)) {
*intermediate = *optimal;
intermediate->cxsr = false;
intermediate->hpll_en = false;
goto out;
}
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
intermediate->cxsr = optimal->cxsr && active->cxsr &&
!new_crtc_state->disable_cxsr;
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
intermediate->hpll_en = optimal->hpll_en && active->hpll_en &&
!new_crtc_state->disable_cxsr;
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
intermediate->fbc_en = optimal->fbc_en && active->fbc_en;
for_each_plane_id_on_crtc(crtc, plane_id) {
intermediate->wm.plane[plane_id] =
max(optimal->wm.plane[plane_id],
active->wm.plane[plane_id]);
WARN_ON(intermediate->wm.plane[plane_id] >
g4x_plane_fifo_size(plane_id, G4X_WM_LEVEL_NORMAL));
}
intermediate->sr.plane = max(optimal->sr.plane,
active->sr.plane);
intermediate->sr.cursor = max(optimal->sr.cursor,
active->sr.cursor);
intermediate->sr.fbc = max(optimal->sr.fbc,
active->sr.fbc);
intermediate->hpll.plane = max(optimal->hpll.plane,
active->hpll.plane);
intermediate->hpll.cursor = max(optimal->hpll.cursor,
active->hpll.cursor);
intermediate->hpll.fbc = max(optimal->hpll.fbc,
active->hpll.fbc);
WARN_ON((intermediate->sr.plane >
g4x_plane_fifo_size(PLANE_PRIMARY, G4X_WM_LEVEL_SR) ||
intermediate->sr.cursor >
g4x_plane_fifo_size(PLANE_CURSOR, G4X_WM_LEVEL_SR)) &&
intermediate->cxsr);
WARN_ON((intermediate->sr.plane >
g4x_plane_fifo_size(PLANE_PRIMARY, G4X_WM_LEVEL_HPLL) ||
intermediate->sr.cursor >
g4x_plane_fifo_size(PLANE_CURSOR, G4X_WM_LEVEL_HPLL)) &&
intermediate->hpll_en);
WARN_ON(intermediate->sr.fbc > g4x_fbc_fifo_size(1) &&
intermediate->fbc_en && intermediate->cxsr);
WARN_ON(intermediate->hpll.fbc > g4x_fbc_fifo_size(2) &&
intermediate->fbc_en && intermediate->hpll_en);
out:
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
/*
* If our intermediate WM are identical to the final WM, then we can
* omit the post-vblank programming; only update if it's different.
*/
if (memcmp(intermediate, optimal, sizeof(*intermediate)) != 0)
new_crtc_state->wm.need_postvbl_update = true;
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
return 0;
}
static void g4x_merge_wm(struct drm_i915_private *dev_priv,
struct g4x_wm_values *wm)
{
struct intel_crtc *crtc;
int num_active_crtcs = 0;
wm->cxsr = true;
wm->hpll_en = true;
wm->fbc_en = true;
for_each_intel_crtc(&dev_priv->drm, crtc) {
const struct g4x_wm_state *wm_state = &crtc->wm.active.g4x;
if (!crtc->active)
continue;
if (!wm_state->cxsr)
wm->cxsr = false;
if (!wm_state->hpll_en)
wm->hpll_en = false;
if (!wm_state->fbc_en)
wm->fbc_en = false;
num_active_crtcs++;
}
if (num_active_crtcs != 1) {
wm->cxsr = false;
wm->hpll_en = false;
wm->fbc_en = false;
}
for_each_intel_crtc(&dev_priv->drm, crtc) {
const struct g4x_wm_state *wm_state = &crtc->wm.active.g4x;
enum pipe pipe = crtc->pipe;
wm->pipe[pipe] = wm_state->wm;
if (crtc->active && wm->cxsr)
wm->sr = wm_state->sr;
if (crtc->active && wm->hpll_en)
wm->hpll = wm_state->hpll;
}
}
static void g4x_program_watermarks(struct drm_i915_private *dev_priv)
{
struct g4x_wm_values *old_wm = &dev_priv->wm.g4x;
struct g4x_wm_values new_wm = {};
g4x_merge_wm(dev_priv, &new_wm);
if (memcmp(old_wm, &new_wm, sizeof(new_wm)) == 0)
return;
if (is_disabling(old_wm->cxsr, new_wm.cxsr, true))
_intel_set_memory_cxsr(dev_priv, false);
g4x_write_wm_values(dev_priv, &new_wm);
if (is_enabling(old_wm->cxsr, new_wm.cxsr, true))
_intel_set_memory_cxsr(dev_priv, true);
*old_wm = new_wm;
}
static void g4x_initial_watermarks(struct intel_atomic_state *state,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
mutex_lock(&dev_priv->wm.wm_mutex);
crtc->wm.active.g4x = crtc_state->wm.g4x.intermediate;
g4x_program_watermarks(dev_priv);
mutex_unlock(&dev_priv->wm.wm_mutex);
}
static void g4x_optimize_watermarks(struct intel_atomic_state *state,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
if (!crtc_state->wm.need_postvbl_update)
return;
mutex_lock(&dev_priv->wm.wm_mutex);
intel_crtc->wm.active.g4x = crtc_state->wm.g4x.optimal;
g4x_program_watermarks(dev_priv);
mutex_unlock(&dev_priv->wm.wm_mutex);
}
/* latency must be in 0.1us units. */
static unsigned int vlv_wm_method2(unsigned int pixel_rate,
unsigned int htotal,
unsigned int width,
unsigned int cpp,
unsigned int latency)
{
unsigned int ret;
ret = intel_wm_method2(pixel_rate, htotal,
width, cpp, latency);
ret = DIV_ROUND_UP(ret, 64);
return ret;
}
static void vlv_setup_wm_latency(struct drm_i915_private *dev_priv)
{
/* all latencies in usec */
dev_priv->wm.pri_latency[VLV_WM_LEVEL_PM2] = 3;
dev_priv->wm.max_level = VLV_WM_LEVEL_PM2;
if (IS_CHERRYVIEW(dev_priv)) {
dev_priv->wm.pri_latency[VLV_WM_LEVEL_PM5] = 12;
dev_priv->wm.pri_latency[VLV_WM_LEVEL_DDR_DVFS] = 33;
dev_priv->wm.max_level = VLV_WM_LEVEL_DDR_DVFS;
}
}
static uint16_t vlv_compute_wm_level(const struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state,
int level)
{
struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
const struct drm_display_mode *adjusted_mode =
&crtc_state->base.adjusted_mode;
unsigned int clock, htotal, cpp, width, wm;
if (dev_priv->wm.pri_latency[level] == 0)
return USHRT_MAX;
if (!intel_wm_plane_visible(crtc_state, plane_state))
return 0;
cpp = plane_state->base.fb->format->cpp[0];
clock = adjusted_mode->crtc_clock;
htotal = adjusted_mode->crtc_htotal;
width = crtc_state->pipe_src_w;
if (plane->id == PLANE_CURSOR) {
/*
* FIXME the formula gives values that are
* too big for the cursor FIFO, and hence we
* would never be able to use cursors. For
* now just hardcode the watermark.
*/
wm = 63;
} else {
wm = vlv_wm_method2(clock, htotal, width, cpp,
dev_priv->wm.pri_latency[level] * 10);
}
return min_t(unsigned int, wm, USHRT_MAX);
}
static bool vlv_need_sprite0_fifo_workaround(unsigned int active_planes)
{
return (active_planes & (BIT(PLANE_SPRITE0) |
BIT(PLANE_SPRITE1))) == BIT(PLANE_SPRITE1);
}
static int vlv_compute_fifo(struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
const struct g4x_pipe_wm *raw =
&crtc_state->wm.vlv.raw[VLV_WM_LEVEL_PM2];
struct vlv_fifo_state *fifo_state = &crtc_state->wm.vlv.fifo_state;
unsigned int active_planes = crtc_state->active_planes & ~BIT(PLANE_CURSOR);
int num_active_planes = hweight32(active_planes);
const int fifo_size = 511;
int fifo_extra, fifo_left = fifo_size;
int sprite0_fifo_extra = 0;
unsigned int total_rate;
enum plane_id plane_id;
/*
* When enabling sprite0 after sprite1 has already been enabled
* we tend to get an underrun unless sprite0 already has some
* FIFO space allcoated. Hence we always allocate at least one
* cacheline for sprite0 whenever sprite1 is enabled.
*
* All other plane enable sequences appear immune to this problem.
*/
if (vlv_need_sprite0_fifo_workaround(active_planes))
sprite0_fifo_extra = 1;
total_rate = raw->plane[PLANE_PRIMARY] +
raw->plane[PLANE_SPRITE0] +
raw->plane[PLANE_SPRITE1] +
sprite0_fifo_extra;
if (total_rate > fifo_size)
return -EINVAL;
if (total_rate == 0)
total_rate = 1;
for_each_plane_id_on_crtc(crtc, plane_id) {
unsigned int rate;
if ((active_planes & BIT(plane_id)) == 0) {
fifo_state->plane[plane_id] = 0;
continue;
}
rate = raw->plane[plane_id];
fifo_state->plane[plane_id] = fifo_size * rate / total_rate;
fifo_left -= fifo_state->plane[plane_id];
}
fifo_state->plane[PLANE_SPRITE0] += sprite0_fifo_extra;
fifo_left -= sprite0_fifo_extra;
fifo_state->plane[PLANE_CURSOR] = 63;
fifo_extra = DIV_ROUND_UP(fifo_left, num_active_planes ?: 1);
/* spread the remainder evenly */
for_each_plane_id_on_crtc(crtc, plane_id) {
int plane_extra;
if (fifo_left == 0)
break;
if ((active_planes & BIT(plane_id)) == 0)
continue;
plane_extra = min(fifo_extra, fifo_left);
fifo_state->plane[plane_id] += plane_extra;
fifo_left -= plane_extra;
}
WARN_ON(active_planes != 0 && fifo_left != 0);
/* give it all to the first plane if none are active */
if (active_planes == 0) {
WARN_ON(fifo_left != fifo_size);
fifo_state->plane[PLANE_PRIMARY] = fifo_left;
}
return 0;
}
/* mark all levels starting from 'level' as invalid */
static void vlv_invalidate_wms(struct intel_crtc *crtc,
struct vlv_wm_state *wm_state, int level)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
for (; level < intel_wm_num_levels(dev_priv); level++) {
enum plane_id plane_id;
for_each_plane_id_on_crtc(crtc, plane_id)
wm_state->wm[level].plane[plane_id] = USHRT_MAX;
wm_state->sr[level].cursor = USHRT_MAX;
wm_state->sr[level].plane = USHRT_MAX;
}
}
static u16 vlv_invert_wm_value(u16 wm, u16 fifo_size)
{
if (wm > fifo_size)
return USHRT_MAX;
else
return fifo_size - wm;
}
/*
* Starting from 'level' set all higher
* levels to 'value' in the "raw" watermarks.
*/
static bool vlv_raw_plane_wm_set(struct intel_crtc_state *crtc_state,
int level, enum plane_id plane_id, u16 value)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
int num_levels = intel_wm_num_levels(dev_priv);
bool dirty = false;
for (; level < num_levels; level++) {
struct g4x_pipe_wm *raw = &crtc_state->wm.vlv.raw[level];
dirty |= raw->plane[plane_id] != value;
raw->plane[plane_id] = value;
}
return dirty;
}
static bool vlv_raw_plane_wm_compute(struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state)
{
struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
enum plane_id plane_id = plane->id;
int num_levels = intel_wm_num_levels(to_i915(plane->base.dev));
int level;
bool dirty = false;
if (!intel_wm_plane_visible(crtc_state, plane_state)) {
dirty |= vlv_raw_plane_wm_set(crtc_state, 0, plane_id, 0);
goto out;
}
for (level = 0; level < num_levels; level++) {
struct g4x_pipe_wm *raw = &crtc_state->wm.vlv.raw[level];
int wm = vlv_compute_wm_level(crtc_state, plane_state, level);
int max_wm = plane_id == PLANE_CURSOR ? 63 : 511;
if (wm > max_wm)
break;
dirty |= raw->plane[plane_id] != wm;
raw->plane[plane_id] = wm;
}
/* mark all higher levels as invalid */
dirty |= vlv_raw_plane_wm_set(crtc_state, level, plane_id, USHRT_MAX);
out:
if (dirty)
DRM_DEBUG_KMS("%s watermarks: PM2=%d, PM5=%d, DDR DVFS=%d\n",
plane->base.name,
crtc_state->wm.vlv.raw[VLV_WM_LEVEL_PM2].plane[plane_id],
crtc_state->wm.vlv.raw[VLV_WM_LEVEL_PM5].plane[plane_id],
crtc_state->wm.vlv.raw[VLV_WM_LEVEL_DDR_DVFS].plane[plane_id]);
return dirty;
}
static bool vlv_raw_plane_wm_is_valid(const struct intel_crtc_state *crtc_state,
enum plane_id plane_id, int level)
{
const struct g4x_pipe_wm *raw =
&crtc_state->wm.vlv.raw[level];
const struct vlv_fifo_state *fifo_state =
&crtc_state->wm.vlv.fifo_state;
return raw->plane[plane_id] <= fifo_state->plane[plane_id];
}
static bool vlv_raw_crtc_wm_is_valid(const struct intel_crtc_state *crtc_state, int level)
{
return vlv_raw_plane_wm_is_valid(crtc_state, PLANE_PRIMARY, level) &&
vlv_raw_plane_wm_is_valid(crtc_state, PLANE_SPRITE0, level) &&
vlv_raw_plane_wm_is_valid(crtc_state, PLANE_SPRITE1, level) &&
vlv_raw_plane_wm_is_valid(crtc_state, PLANE_CURSOR, level);
}
static int vlv_compute_pipe_wm(struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
struct intel_atomic_state *state =
to_intel_atomic_state(crtc_state->base.state);
struct vlv_wm_state *wm_state = &crtc_state->wm.vlv.optimal;
const struct vlv_fifo_state *fifo_state =
&crtc_state->wm.vlv.fifo_state;
int num_active_planes = hweight32(crtc_state->active_planes &
~BIT(PLANE_CURSOR));
bool needs_modeset = drm_atomic_crtc_needs_modeset(&crtc_state->base);
const struct intel_plane_state *old_plane_state;
const struct intel_plane_state *new_plane_state;
struct intel_plane *plane;
enum plane_id plane_id;
int level, ret, i;
unsigned int dirty = 0;
for_each_oldnew_intel_plane_in_state(state, plane,
old_plane_state,
new_plane_state, i) {
if (new_plane_state->base.crtc != &crtc->base &&
old_plane_state->base.crtc != &crtc->base)
continue;
if (vlv_raw_plane_wm_compute(crtc_state, new_plane_state))
dirty |= BIT(plane->id);
}
/*
* DSPARB registers may have been reset due to the
* power well being turned off. Make sure we restore
* them to a consistent state even if no primary/sprite
* planes are initially active.
*/
if (needs_modeset)
crtc_state->fifo_changed = true;
if (!dirty)
return 0;
/* cursor changes don't warrant a FIFO recompute */
if (dirty & ~BIT(PLANE_CURSOR)) {
const struct intel_crtc_state *old_crtc_state =
intel_atomic_get_old_crtc_state(state, crtc);
const struct vlv_fifo_state *old_fifo_state =
&old_crtc_state->wm.vlv.fifo_state;
ret = vlv_compute_fifo(crtc_state);
if (ret)
return ret;
if (needs_modeset ||
memcmp(old_fifo_state, fifo_state,
sizeof(*fifo_state)) != 0)
crtc_state->fifo_changed = true;
}
/* initially allow all levels */
wm_state->num_levels = intel_wm_num_levels(dev_priv);
/*
* Note that enabling cxsr with no primary/sprite planes
* enabled can wedge the pipe. Hence we only allow cxsr
* with exactly one enabled primary/sprite plane.
*/
wm_state->cxsr = crtc->pipe != PIPE_C && num_active_planes == 1;
for (level = 0; level < wm_state->num_levels; level++) {
const struct g4x_pipe_wm *raw = &crtc_state->wm.vlv.raw[level];
const int sr_fifo_size = INTEL_INFO(dev_priv)->num_pipes * 512 - 1;
if (!vlv_raw_crtc_wm_is_valid(crtc_state, level))
break;
for_each_plane_id_on_crtc(crtc, plane_id) {
wm_state->wm[level].plane[plane_id] =
vlv_invert_wm_value(raw->plane[plane_id],
fifo_state->plane[plane_id]);
}
wm_state->sr[level].plane =
vlv_invert_wm_value(max3(raw->plane[PLANE_PRIMARY],
raw->plane[PLANE_SPRITE0],
raw->plane[PLANE_SPRITE1]),
sr_fifo_size);
wm_state->sr[level].cursor =
vlv_invert_wm_value(raw->plane[PLANE_CURSOR],
63);
}
if (level == 0)
return -EINVAL;
/* limit to only levels we can actually handle */
wm_state->num_levels = level;
/* invalidate the higher levels */
vlv_invalidate_wms(crtc, wm_state, level);
return 0;
}
#define VLV_FIFO(plane, value) \
(((value) << DSPARB_ ## plane ## _SHIFT_VLV) & DSPARB_ ## plane ## _MASK_VLV)
static void vlv_atomic_update_fifo(struct intel_atomic_state *state,
struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
const struct vlv_fifo_state *fifo_state =
&crtc_state->wm.vlv.fifo_state;
int sprite0_start, sprite1_start, fifo_size;
if (!crtc_state->fifo_changed)
return;
sprite0_start = fifo_state->plane[PLANE_PRIMARY];
sprite1_start = fifo_state->plane[PLANE_SPRITE0] + sprite0_start;
fifo_size = fifo_state->plane[PLANE_SPRITE1] + sprite1_start;
WARN_ON(fifo_state->plane[PLANE_CURSOR] != 63);
WARN_ON(fifo_size != 511);
trace_vlv_fifo_size(crtc, sprite0_start, sprite1_start, fifo_size);
/*
* uncore.lock serves a double purpose here. It allows us to
* use the less expensive I915_{READ,WRITE}_FW() functions, and
* it protects the DSPARB registers from getting clobbered by
* parallel updates from multiple pipes.
*
* intel_pipe_update_start() has already disabled interrupts
* for us, so a plain spin_lock() is sufficient here.
*/
spin_lock(&dev_priv->uncore.lock);
switch (crtc->pipe) {
uint32_t dsparb, dsparb2, dsparb3;
case PIPE_A:
dsparb = I915_READ_FW(DSPARB);
dsparb2 = I915_READ_FW(DSPARB2);
dsparb &= ~(VLV_FIFO(SPRITEA, 0xff) |
VLV_FIFO(SPRITEB, 0xff));
dsparb |= (VLV_FIFO(SPRITEA, sprite0_start) |
VLV_FIFO(SPRITEB, sprite1_start));
dsparb2 &= ~(VLV_FIFO(SPRITEA_HI, 0x1) |
VLV_FIFO(SPRITEB_HI, 0x1));
dsparb2 |= (VLV_FIFO(SPRITEA_HI, sprite0_start >> 8) |
VLV_FIFO(SPRITEB_HI, sprite1_start >> 8));
I915_WRITE_FW(DSPARB, dsparb);
I915_WRITE_FW(DSPARB2, dsparb2);
break;
case PIPE_B:
dsparb = I915_READ_FW(DSPARB);
dsparb2 = I915_READ_FW(DSPARB2);
dsparb &= ~(VLV_FIFO(SPRITEC, 0xff) |
VLV_FIFO(SPRITED, 0xff));
dsparb |= (VLV_FIFO(SPRITEC, sprite0_start) |
VLV_FIFO(SPRITED, sprite1_start));
dsparb2 &= ~(VLV_FIFO(SPRITEC_HI, 0xff) |
VLV_FIFO(SPRITED_HI, 0xff));
dsparb2 |= (VLV_FIFO(SPRITEC_HI, sprite0_start >> 8) |
VLV_FIFO(SPRITED_HI, sprite1_start >> 8));
I915_WRITE_FW(DSPARB, dsparb);
I915_WRITE_FW(DSPARB2, dsparb2);
break;
case PIPE_C:
dsparb3 = I915_READ_FW(DSPARB3);
dsparb2 = I915_READ_FW(DSPARB2);
dsparb3 &= ~(VLV_FIFO(SPRITEE, 0xff) |
VLV_FIFO(SPRITEF, 0xff));
dsparb3 |= (VLV_FIFO(SPRITEE, sprite0_start) |
VLV_FIFO(SPRITEF, sprite1_start));
dsparb2 &= ~(VLV_FIFO(SPRITEE_HI, 0xff) |
VLV_FIFO(SPRITEF_HI, 0xff));
dsparb2 |= (VLV_FIFO(SPRITEE_HI, sprite0_start >> 8) |
VLV_FIFO(SPRITEF_HI, sprite1_start >> 8));
I915_WRITE_FW(DSPARB3, dsparb3);
I915_WRITE_FW(DSPARB2, dsparb2);
break;
default:
break;
}
POSTING_READ_FW(DSPARB);
spin_unlock(&dev_priv->uncore.lock);
}
#undef VLV_FIFO
static int vlv_compute_intermediate_wm(struct drm_device *dev,
struct intel_crtc *crtc,
struct intel_crtc_state *new_crtc_state)
{
struct vlv_wm_state *intermediate = &new_crtc_state->wm.vlv.intermediate;
const struct vlv_wm_state *optimal = &new_crtc_state->wm.vlv.optimal;
struct intel_atomic_state *intel_state =
to_intel_atomic_state(new_crtc_state->base.state);
const struct intel_crtc_state *old_crtc_state =
intel_atomic_get_old_crtc_state(intel_state, crtc);
const struct vlv_wm_state *active = &old_crtc_state->wm.vlv.optimal;
int level;
if (!new_crtc_state->base.active || drm_atomic_crtc_needs_modeset(&new_crtc_state->base)) {
*intermediate = *optimal;
intermediate->cxsr = false;
goto out;
}
intermediate->num_levels = min(optimal->num_levels, active->num_levels);
intermediate->cxsr = optimal->cxsr && active->cxsr &&
!new_crtc_state->disable_cxsr;
for (level = 0; level < intermediate->num_levels; level++) {
enum plane_id plane_id;
for_each_plane_id_on_crtc(crtc, plane_id) {
intermediate->wm[level].plane[plane_id] =
min(optimal->wm[level].plane[plane_id],
active->wm[level].plane[plane_id]);
}
intermediate->sr[level].plane = min(optimal->sr[level].plane,
active->sr[level].plane);
intermediate->sr[level].cursor = min(optimal->sr[level].cursor,
active->sr[level].cursor);
}
vlv_invalidate_wms(crtc, intermediate, level);
out:
/*
* If our intermediate WM are identical to the final WM, then we can
* omit the post-vblank programming; only update if it's different.
*/
if (memcmp(intermediate, optimal, sizeof(*intermediate)) != 0)
new_crtc_state->wm.need_postvbl_update = true;
return 0;
}
static void vlv_merge_wm(struct drm_i915_private *dev_priv,
struct vlv_wm_values *wm)
{
struct intel_crtc *crtc;
int num_active_crtcs = 0;
wm->level = dev_priv->wm.max_level;
wm->cxsr = true;
for_each_intel_crtc(&dev_priv->drm, crtc) {
const struct vlv_wm_state *wm_state = &crtc->wm.active.vlv;
if (!crtc->active)
continue;
if (!wm_state->cxsr)
wm->cxsr = false;
num_active_crtcs++;
wm->level = min_t(int, wm->level, wm_state->num_levels - 1);
}
if (num_active_crtcs != 1)
wm->cxsr = false;
if (num_active_crtcs > 1)
wm->level = VLV_WM_LEVEL_PM2;
for_each_intel_crtc(&dev_priv->drm, crtc) {
const struct vlv_wm_state *wm_state = &crtc->wm.active.vlv;
enum pipe pipe = crtc->pipe;
wm->pipe[pipe] = wm_state->wm[wm->level];
if (crtc->active && wm->cxsr)
wm->sr = wm_state->sr[wm->level];
wm->ddl[pipe].plane[PLANE_PRIMARY] = DDL_PRECISION_HIGH | 2;
wm->ddl[pipe].plane[PLANE_SPRITE0] = DDL_PRECISION_HIGH | 2;
wm->ddl[pipe].plane[PLANE_SPRITE1] = DDL_PRECISION_HIGH | 2;
wm->ddl[pipe].plane[PLANE_CURSOR] = DDL_PRECISION_HIGH | 2;
}
}
static void vlv_program_watermarks(struct drm_i915_private *dev_priv)
{
struct vlv_wm_values *old_wm = &dev_priv->wm.vlv;
struct vlv_wm_values new_wm = {};
vlv_merge_wm(dev_priv, &new_wm);
if (memcmp(old_wm, &new_wm, sizeof(new_wm)) == 0)
return;
if (is_disabling(old_wm->level, new_wm.level, VLV_WM_LEVEL_DDR_DVFS))
chv_set_memory_dvfs(dev_priv, false);
if (is_disabling(old_wm->level, new_wm.level, VLV_WM_LEVEL_PM5))
chv_set_memory_pm5(dev_priv, false);
if (is_disabling(old_wm->cxsr, new_wm.cxsr, true))
_intel_set_memory_cxsr(dev_priv, false);
vlv_write_wm_values(dev_priv, &new_wm);
if (is_enabling(old_wm->cxsr, new_wm.cxsr, true))
_intel_set_memory_cxsr(dev_priv, true);
if (is_enabling(old_wm->level, new_wm.level, VLV_WM_LEVEL_PM5))
chv_set_memory_pm5(dev_priv, true);
if (is_enabling(old_wm->level, new_wm.level, VLV_WM_LEVEL_DDR_DVFS))
chv_set_memory_dvfs(dev_priv, true);
*old_wm = new_wm;
}
static void vlv_initial_watermarks(struct intel_atomic_state *state,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
mutex_lock(&dev_priv->wm.wm_mutex);
crtc->wm.active.vlv = crtc_state->wm.vlv.intermediate;
vlv_program_watermarks(dev_priv);
mutex_unlock(&dev_priv->wm.wm_mutex);
}
static void vlv_optimize_watermarks(struct intel_atomic_state *state,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
if (!crtc_state->wm.need_postvbl_update)
return;
mutex_lock(&dev_priv->wm.wm_mutex);
intel_crtc->wm.active.vlv = crtc_state->wm.vlv.optimal;
vlv_program_watermarks(dev_priv);
mutex_unlock(&dev_priv->wm.wm_mutex);
}
static void i965_update_wm(struct intel_crtc *unused_crtc)
{
struct drm_i915_private *dev_priv = to_i915(unused_crtc->base.dev);
struct intel_crtc *crtc;
int srwm = 1;
int cursor_sr = 16;
bool cxsr_enabled;
/* Calc sr entries for one plane configs */
crtc = single_enabled_crtc(dev_priv);
if (crtc) {
/* self-refresh has much higher latency */
static const int sr_latency_ns = 12000;
const struct drm_display_mode *adjusted_mode =
&crtc->config->base.adjusted_mode;
const struct drm_framebuffer *fb =
crtc->base.primary->state->fb;
int clock = adjusted_mode->crtc_clock;
int htotal = adjusted_mode->crtc_htotal;
int hdisplay = crtc->config->pipe_src_w;
int cpp = fb->format->cpp[0];
int entries;
entries = intel_wm_method2(clock, htotal,
hdisplay, cpp, sr_latency_ns / 100);
entries = DIV_ROUND_UP(entries, I915_FIFO_LINE_SIZE);
srwm = I965_FIFO_SIZE - entries;
if (srwm < 0)
srwm = 1;
srwm &= 0x1ff;
DRM_DEBUG_KMS("self-refresh entries: %d, wm: %d\n",
entries, srwm);
entries = intel_wm_method2(clock, htotal,
crtc->base.cursor->state->crtc_w, 4,
sr_latency_ns / 100);
entries = DIV_ROUND_UP(entries,
i965_cursor_wm_info.cacheline_size) +
i965_cursor_wm_info.guard_size;
cursor_sr = i965_cursor_wm_info.fifo_size - entries;
if (cursor_sr > i965_cursor_wm_info.max_wm)
cursor_sr = i965_cursor_wm_info.max_wm;
DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
"cursor %d\n", srwm, cursor_sr);
cxsr_enabled = true;
} else {
cxsr_enabled = false;
/* Turn off self refresh if both pipes are enabled */
intel_set_memory_cxsr(dev_priv, false);
}
DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
srwm);
/* 965 has limitations... */
I915_WRITE(DSPFW1, FW_WM(srwm, SR) |
FW_WM(8, CURSORB) |
FW_WM(8, PLANEB) |
FW_WM(8, PLANEA));
I915_WRITE(DSPFW2, FW_WM(8, CURSORA) |
FW_WM(8, PLANEC_OLD));
/* update cursor SR watermark */
I915_WRITE(DSPFW3, FW_WM(cursor_sr, CURSOR_SR));
if (cxsr_enabled)
intel_set_memory_cxsr(dev_priv, true);
}
#undef FW_WM
static void i9xx_update_wm(struct intel_crtc *unused_crtc)
{
struct drm_i915_private *dev_priv = to_i915(unused_crtc->base.dev);
const struct intel_watermark_params *wm_info;
uint32_t fwater_lo;
uint32_t fwater_hi;
int cwm, srwm = 1;
int fifo_size;
int planea_wm, planeb_wm;
struct intel_crtc *crtc, *enabled = NULL;
if (IS_I945GM(dev_priv))
wm_info = &i945_wm_info;
else if (!IS_GEN2(dev_priv))
wm_info = &i915_wm_info;
else
wm_info = &i830_a_wm_info;
fifo_size = dev_priv->display.get_fifo_size(dev_priv, PLANE_A);
crtc = intel_get_crtc_for_plane(dev_priv, PLANE_A);
if (intel_crtc_active(crtc)) {
const struct drm_display_mode *adjusted_mode =
&crtc->config->base.adjusted_mode;
const struct drm_framebuffer *fb =
crtc->base.primary->state->fb;
int cpp;
if (IS_GEN2(dev_priv))
cpp = 4;
else
cpp = fb->format->cpp[0];
planea_wm = intel_calculate_wm(adjusted_mode->crtc_clock,
wm_info, fifo_size, cpp,
pessimal_latency_ns);
enabled = crtc;
} else {
planea_wm = fifo_size - wm_info->guard_size;
if (planea_wm > (long)wm_info->max_wm)
planea_wm = wm_info->max_wm;
}
if (IS_GEN2(dev_priv))
wm_info = &i830_bc_wm_info;
fifo_size = dev_priv->display.get_fifo_size(dev_priv, PLANE_B);
crtc = intel_get_crtc_for_plane(dev_priv, PLANE_B);
if (intel_crtc_active(crtc)) {
const struct drm_display_mode *adjusted_mode =
&crtc->config->base.adjusted_mode;
const struct drm_framebuffer *fb =
crtc->base.primary->state->fb;
int cpp;
if (IS_GEN2(dev_priv))
cpp = 4;
else
cpp = fb->format->cpp[0];
planeb_wm = intel_calculate_wm(adjusted_mode->crtc_clock,
wm_info, fifo_size, cpp,
pessimal_latency_ns);
if (enabled == NULL)
enabled = crtc;
else
enabled = NULL;
} else {
planeb_wm = fifo_size - wm_info->guard_size;
if (planeb_wm > (long)wm_info->max_wm)
planeb_wm = wm_info->max_wm;
}
DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
if (IS_I915GM(dev_priv) && enabled) {
struct drm_i915_gem_object *obj;
obj = intel_fb_obj(enabled->base.primary->state->fb);
/* self-refresh seems busted with untiled */
if (!i915_gem_object_is_tiled(obj))
enabled = NULL;
}
/*
* Overlay gets an aggressive default since video jitter is bad.
*/
cwm = 2;
/* Play safe and disable self-refresh before adjusting watermarks. */
intel_set_memory_cxsr(dev_priv, false);
/* Calc sr entries for one plane configs */
if (HAS_FW_BLC(dev_priv) && enabled) {
/* self-refresh has much higher latency */
static const int sr_latency_ns = 6000;
const struct drm_display_mode *adjusted_mode =
&enabled->config->base.adjusted_mode;
const struct drm_framebuffer *fb =
enabled->base.primary->state->fb;
int clock = adjusted_mode->crtc_clock;
int htotal = adjusted_mode->crtc_htotal;
int hdisplay = enabled->config->pipe_src_w;
int cpp;
int entries;
if (IS_I915GM(dev_priv) || IS_I945GM(dev_priv))
cpp = 4;
else
cpp = fb->format->cpp[0];
entries = intel_wm_method2(clock, htotal, hdisplay, cpp,
sr_latency_ns / 100);
entries = DIV_ROUND_UP(entries, wm_info->cacheline_size);
DRM_DEBUG_KMS("self-refresh entries: %d\n", entries);
srwm = wm_info->fifo_size - entries;
if (srwm < 0)
srwm = 1;
if (IS_I945G(dev_priv) || IS_I945GM(dev_priv))
I915_WRITE(FW_BLC_SELF,
FW_BLC_SELF_FIFO_MASK | (srwm & 0xff));
else
I915_WRITE(FW_BLC_SELF, srwm & 0x3f);
}
DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
planea_wm, planeb_wm, cwm, srwm);
fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
fwater_hi = (cwm & 0x1f);
/* Set request length to 8 cachelines per fetch */
fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
fwater_hi = fwater_hi | (1 << 8);
I915_WRITE(FW_BLC, fwater_lo);
I915_WRITE(FW_BLC2, fwater_hi);
if (enabled)
intel_set_memory_cxsr(dev_priv, true);
}
static void i845_update_wm(struct intel_crtc *unused_crtc)
{
struct drm_i915_private *dev_priv = to_i915(unused_crtc->base.dev);
struct intel_crtc *crtc;
const struct drm_display_mode *adjusted_mode;
uint32_t fwater_lo;
int planea_wm;
crtc = single_enabled_crtc(dev_priv);
if (crtc == NULL)
return;
adjusted_mode = &crtc->config->base.adjusted_mode;
planea_wm = intel_calculate_wm(adjusted_mode->crtc_clock,
&i845_wm_info,
dev_priv->display.get_fifo_size(dev_priv, PLANE_A),
4, pessimal_latency_ns);
fwater_lo = I915_READ(FW_BLC) & ~0xfff;
fwater_lo |= (3<<8) | planea_wm;
DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm);
I915_WRITE(FW_BLC, fwater_lo);
}
/* latency must be in 0.1us units. */
static unsigned int ilk_wm_method1(unsigned int pixel_rate,
unsigned int cpp,
unsigned int latency)
{
unsigned int ret;
ret = intel_wm_method1(pixel_rate, cpp, latency);
ret = DIV_ROUND_UP(ret, 64) + 2;
return ret;
}
/* latency must be in 0.1us units. */
static unsigned int ilk_wm_method2(unsigned int pixel_rate,
unsigned int htotal,
unsigned int width,
unsigned int cpp,
unsigned int latency)
{
unsigned int ret;
ret = intel_wm_method2(pixel_rate, htotal,
width, cpp, latency);
ret = DIV_ROUND_UP(ret, 64) + 2;
return ret;
}
static uint32_t ilk_wm_fbc(uint32_t pri_val, uint32_t horiz_pixels,
uint8_t cpp)
{
/*
* Neither of these should be possible since this function shouldn't be
* called if the CRTC is off or the plane is invisible. But let's be
* extra paranoid to avoid a potential divide-by-zero if we screw up
* elsewhere in the driver.
*/
if (WARN_ON(!cpp))
return 0;
if (WARN_ON(!horiz_pixels))
return 0;
return DIV_ROUND_UP(pri_val * 64, horiz_pixels * cpp) + 2;
}
struct ilk_wm_maximums {
uint16_t pri;
uint16_t spr;
uint16_t cur;
uint16_t fbc;
};
/*
* For both WM_PIPE and WM_LP.
* mem_value must be in 0.1us units.
*/
static uint32_t ilk_compute_pri_wm(const struct intel_crtc_state *cstate,
const struct intel_plane_state *pstate,
uint32_t mem_value,
bool is_lp)
{
uint32_t method1, method2;
int cpp;
drm/i915: Disable LP3 watermarks on all SNB machines I have a Thinkpad X220 Tablet in my hands that is losing vblank interrupts whenever LP3 watermarks are used. If I nudge the latency value written to the WM3 register just by one in either direction the problem disappears. That to me suggests that the punit will not enter the corrsponding powersave mode (MPLL shutdown IIRC) unless the latency value in the register matches exactly what we read from SSKPD. Ie. it's not really a latency value but rather just a cookie by which the punit can identify the desired power saving state. On HSW/BDW this was changed such that we actually just write the WM level number into those bits, which makes much more sense given the observed behaviour. We could try to handle this by disallowing LP3 watermarks only when vblank interrupts are enabled but we'd first have to prove that only vblank interrupts are affected, which seems unlikely. Also we can't grab the wm mutex from the vblank enable/disable hooks because those are called with various spinlocks held. Thus we'd have to redesigne the watermark locking. So to play it safe and keep the code simple we simply disable LP3 watermarks on all SNB machines. To do that we simply zero out the latency values for watermark level 3, and we adjust the watermark computation to check for that. The behaviour now matches that of the g4x/vlv/skl wm code in the presence of a zeroed latency value. v2: s/USHRT_MAX/U32_MAX/ for consistency with the types (Chris) Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101269 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103713 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114173440.6730-1-ville.syrjala@linux.intel.com
2018-11-14 10:34:40 -07:00
if (mem_value == 0)
return U32_MAX;
if (!intel_wm_plane_visible(cstate, pstate))
return 0;
cpp = pstate->base.fb->format->cpp[0];
method1 = ilk_wm_method1(cstate->pixel_rate, cpp, mem_value);
if (!is_lp)
return method1;
method2 = ilk_wm_method2(cstate->pixel_rate,
cstate->base.adjusted_mode.crtc_htotal,
drm_rect_width(&pstate->base.dst),
cpp, mem_value);
return min(method1, method2);
}
/*
* For both WM_PIPE and WM_LP.
* mem_value must be in 0.1us units.
*/
static uint32_t ilk_compute_spr_wm(const struct intel_crtc_state *cstate,
const struct intel_plane_state *pstate,
uint32_t mem_value)
{
uint32_t method1, method2;
int cpp;
drm/i915: Disable LP3 watermarks on all SNB machines I have a Thinkpad X220 Tablet in my hands that is losing vblank interrupts whenever LP3 watermarks are used. If I nudge the latency value written to the WM3 register just by one in either direction the problem disappears. That to me suggests that the punit will not enter the corrsponding powersave mode (MPLL shutdown IIRC) unless the latency value in the register matches exactly what we read from SSKPD. Ie. it's not really a latency value but rather just a cookie by which the punit can identify the desired power saving state. On HSW/BDW this was changed such that we actually just write the WM level number into those bits, which makes much more sense given the observed behaviour. We could try to handle this by disallowing LP3 watermarks only when vblank interrupts are enabled but we'd first have to prove that only vblank interrupts are affected, which seems unlikely. Also we can't grab the wm mutex from the vblank enable/disable hooks because those are called with various spinlocks held. Thus we'd have to redesigne the watermark locking. So to play it safe and keep the code simple we simply disable LP3 watermarks on all SNB machines. To do that we simply zero out the latency values for watermark level 3, and we adjust the watermark computation to check for that. The behaviour now matches that of the g4x/vlv/skl wm code in the presence of a zeroed latency value. v2: s/USHRT_MAX/U32_MAX/ for consistency with the types (Chris) Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101269 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103713 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114173440.6730-1-ville.syrjala@linux.intel.com
2018-11-14 10:34:40 -07:00
if (mem_value == 0)
return U32_MAX;
if (!intel_wm_plane_visible(cstate, pstate))
return 0;
cpp = pstate->base.fb->format->cpp[0];
method1 = ilk_wm_method1(cstate->pixel_rate, cpp, mem_value);
method2 = ilk_wm_method2(cstate->pixel_rate,
cstate->base.adjusted_mode.crtc_htotal,
drm_rect_width(&pstate->base.dst),
cpp, mem_value);
return min(method1, method2);
}
/*
* For both WM_PIPE and WM_LP.
* mem_value must be in 0.1us units.
*/
static uint32_t ilk_compute_cur_wm(const struct intel_crtc_state *cstate,
const struct intel_plane_state *pstate,
uint32_t mem_value)
{
drm/i915: Fix legacy cursor vs. watermarks for ILK-BDW In order to make cursor updates actually safe wrt. watermark programming we have to clear the legacy_cursor_update flag in the atomic state. That will cause the regular atomic update path to do the necessary vblank wait after the plane update if needed, otherwise the vblank wait would be skipped and we'd feed the optimal watermarks to the hardware before the plane update has actually happened. To make the slow vs. fast path determination in intel_legacy_cursor_update() a little simpler we can ignore the actual visibility of the plane (which can only get computed once we've already chosen out path) and instead we simply check whether the fb is being set or cleared by the user. This means a fully clipped but logically visible cursor will be considered visible as far as watermark programming is concerned. We can do that for the cursor since it's a fixed size plane and the clipped size doesn't play a role in the watermark computation. This should fix underruns that can occur when the cursor gets enable/disabled or the size gets changed. Hopefully it's good enough that only pure cursor movement and flips go through unthrottled. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Reported-by: Uwe Kleine-König <uwe@kleine-koenig.org> Fixes: f79f26921ee1 ("drm/i915: Add a cursor hack to allow converting legacy page flip to atomic, v3.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170217150159.11683-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by: Rafael Ristovski <rafael.ristovski@gmail.com>
2017-02-17 08:01:59 -07:00
int cpp;
drm/i915: Disable LP3 watermarks on all SNB machines I have a Thinkpad X220 Tablet in my hands that is losing vblank interrupts whenever LP3 watermarks are used. If I nudge the latency value written to the WM3 register just by one in either direction the problem disappears. That to me suggests that the punit will not enter the corrsponding powersave mode (MPLL shutdown IIRC) unless the latency value in the register matches exactly what we read from SSKPD. Ie. it's not really a latency value but rather just a cookie by which the punit can identify the desired power saving state. On HSW/BDW this was changed such that we actually just write the WM level number into those bits, which makes much more sense given the observed behaviour. We could try to handle this by disallowing LP3 watermarks only when vblank interrupts are enabled but we'd first have to prove that only vblank interrupts are affected, which seems unlikely. Also we can't grab the wm mutex from the vblank enable/disable hooks because those are called with various spinlocks held. Thus we'd have to redesigne the watermark locking. So to play it safe and keep the code simple we simply disable LP3 watermarks on all SNB machines. To do that we simply zero out the latency values for watermark level 3, and we adjust the watermark computation to check for that. The behaviour now matches that of the g4x/vlv/skl wm code in the presence of a zeroed latency value. v2: s/USHRT_MAX/U32_MAX/ for consistency with the types (Chris) Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101269 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103713 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114173440.6730-1-ville.syrjala@linux.intel.com
2018-11-14 10:34:40 -07:00
if (mem_value == 0)
return U32_MAX;
if (!intel_wm_plane_visible(cstate, pstate))
return 0;
drm/i915: Fix legacy cursor vs. watermarks for ILK-BDW In order to make cursor updates actually safe wrt. watermark programming we have to clear the legacy_cursor_update flag in the atomic state. That will cause the regular atomic update path to do the necessary vblank wait after the plane update if needed, otherwise the vblank wait would be skipped and we'd feed the optimal watermarks to the hardware before the plane update has actually happened. To make the slow vs. fast path determination in intel_legacy_cursor_update() a little simpler we can ignore the actual visibility of the plane (which can only get computed once we've already chosen out path) and instead we simply check whether the fb is being set or cleared by the user. This means a fully clipped but logically visible cursor will be considered visible as far as watermark programming is concerned. We can do that for the cursor since it's a fixed size plane and the clipped size doesn't play a role in the watermark computation. This should fix underruns that can occur when the cursor gets enable/disabled or the size gets changed. Hopefully it's good enough that only pure cursor movement and flips go through unthrottled. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Reported-by: Uwe Kleine-König <uwe@kleine-koenig.org> Fixes: f79f26921ee1 ("drm/i915: Add a cursor hack to allow converting legacy page flip to atomic, v3.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170217150159.11683-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by: Rafael Ristovski <rafael.ristovski@gmail.com>
2017-02-17 08:01:59 -07:00
cpp = pstate->base.fb->format->cpp[0];
return ilk_wm_method2(cstate->pixel_rate,
cstate->base.adjusted_mode.crtc_htotal,
drm/i915: Fix legacy cursor vs. watermarks for ILK-BDW In order to make cursor updates actually safe wrt. watermark programming we have to clear the legacy_cursor_update flag in the atomic state. That will cause the regular atomic update path to do the necessary vblank wait after the plane update if needed, otherwise the vblank wait would be skipped and we'd feed the optimal watermarks to the hardware before the plane update has actually happened. To make the slow vs. fast path determination in intel_legacy_cursor_update() a little simpler we can ignore the actual visibility of the plane (which can only get computed once we've already chosen out path) and instead we simply check whether the fb is being set or cleared by the user. This means a fully clipped but logically visible cursor will be considered visible as far as watermark programming is concerned. We can do that for the cursor since it's a fixed size plane and the clipped size doesn't play a role in the watermark computation. This should fix underruns that can occur when the cursor gets enable/disabled or the size gets changed. Hopefully it's good enough that only pure cursor movement and flips go through unthrottled. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Reported-by: Uwe Kleine-König <uwe@kleine-koenig.org> Fixes: f79f26921ee1 ("drm/i915: Add a cursor hack to allow converting legacy page flip to atomic, v3.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170217150159.11683-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by: Rafael Ristovski <rafael.ristovski@gmail.com>
2017-02-17 08:01:59 -07:00
pstate->base.crtc_w, cpp, mem_value);
}
/* Only for WM_LP. */
static uint32_t ilk_compute_fbc_wm(const struct intel_crtc_state *cstate,
const struct intel_plane_state *pstate,
uint32_t pri_val)
{
int cpp;
if (!intel_wm_plane_visible(cstate, pstate))
return 0;
cpp = pstate->base.fb->format->cpp[0];
return ilk_wm_fbc(pri_val, drm_rect_width(&pstate->base.dst), cpp);
}
static unsigned int
ilk_display_fifo_size(const struct drm_i915_private *dev_priv)
{
if (INTEL_GEN(dev_priv) >= 8)
return 3072;
else if (INTEL_GEN(dev_priv) >= 7)
return 768;
else
return 512;
}
static unsigned int
ilk_plane_wm_reg_max(const struct drm_i915_private *dev_priv,
int level, bool is_sprite)
{
if (INTEL_GEN(dev_priv) >= 8)
/* BDW primary/sprite plane watermarks */
return level == 0 ? 255 : 2047;
else if (INTEL_GEN(dev_priv) >= 7)
/* IVB/HSW primary/sprite plane watermarks */
return level == 0 ? 127 : 1023;
else if (!is_sprite)
/* ILK/SNB primary plane watermarks */
return level == 0 ? 127 : 511;
else
/* ILK/SNB sprite plane watermarks */
return level == 0 ? 63 : 255;
}
static unsigned int
ilk_cursor_wm_reg_max(const struct drm_i915_private *dev_priv, int level)
{
if (INTEL_GEN(dev_priv) >= 7)
return level == 0 ? 63 : 255;
else
return level == 0 ? 31 : 63;
}
static unsigned int ilk_fbc_wm_reg_max(const struct drm_i915_private *dev_priv)
{
if (INTEL_GEN(dev_priv) >= 8)
return 31;
else
return 15;
}
/* Calculate the maximum primary/sprite plane watermark */
static unsigned int ilk_plane_wm_max(const struct drm_device *dev,
int level,
const struct intel_wm_config *config,
enum intel_ddb_partitioning ddb_partitioning,
bool is_sprite)
{
struct drm_i915_private *dev_priv = to_i915(dev);
unsigned int fifo_size = ilk_display_fifo_size(dev_priv);
/* if sprites aren't enabled, sprites get nothing */
if (is_sprite && !config->sprites_enabled)
return 0;
/* HSW allows LP1+ watermarks even with multiple pipes */
if (level == 0 || config->num_pipes_active > 1) {
fifo_size /= INTEL_INFO(dev_priv)->num_pipes;
/*
* For some reason the non self refresh
* FIFO size is only half of the self
* refresh FIFO size on ILK/SNB.
*/
if (INTEL_GEN(dev_priv) <= 6)
fifo_size /= 2;
}
if (config->sprites_enabled) {
/* level 0 is always calculated with 1:1 split */
if (level > 0 && ddb_partitioning == INTEL_DDB_PART_5_6) {
if (is_sprite)
fifo_size *= 5;
fifo_size /= 6;
} else {
fifo_size /= 2;
}
}
/* clamp to max that the registers can hold */
return min(fifo_size, ilk_plane_wm_reg_max(dev_priv, level, is_sprite));
}
/* Calculate the maximum cursor plane watermark */
static unsigned int ilk_cursor_wm_max(const struct drm_device *dev,
int level,
const struct intel_wm_config *config)
{
/* HSW LP1+ watermarks w/ multiple pipes */
if (level > 0 && config->num_pipes_active > 1)
return 64;
/* otherwise just report max that registers can hold */
return ilk_cursor_wm_reg_max(to_i915(dev), level);
}
static void ilk_compute_wm_maximums(const struct drm_device *dev,
int level,
const struct intel_wm_config *config,
enum intel_ddb_partitioning ddb_partitioning,
struct ilk_wm_maximums *max)
{
max->pri = ilk_plane_wm_max(dev, level, config, ddb_partitioning, false);
max->spr = ilk_plane_wm_max(dev, level, config, ddb_partitioning, true);
max->cur = ilk_cursor_wm_max(dev, level, config);
max->fbc = ilk_fbc_wm_reg_max(to_i915(dev));
}
static void ilk_compute_wm_reg_maximums(const struct drm_i915_private *dev_priv,
int level,
struct ilk_wm_maximums *max)
{
max->pri = ilk_plane_wm_reg_max(dev_priv, level, false);
max->spr = ilk_plane_wm_reg_max(dev_priv, level, true);
max->cur = ilk_cursor_wm_reg_max(dev_priv, level);
max->fbc = ilk_fbc_wm_reg_max(dev_priv);
}
static bool ilk_validate_wm_level(int level,
const struct ilk_wm_maximums *max,
struct intel_wm_level *result)
{
bool ret;
/* already determined to be invalid? */
if (!result->enable)
return false;
result->enable = result->pri_val <= max->pri &&
result->spr_val <= max->spr &&
result->cur_val <= max->cur;
ret = result->enable;
/*
* HACK until we can pre-compute everything,
* and thus fail gracefully if LP0 watermarks
* are exceeded...
*/
if (level == 0 && !result->enable) {
if (result->pri_val > max->pri)
DRM_DEBUG_KMS("Primary WM%d too large %u (max %u)\n",
level, result->pri_val, max->pri);
if (result->spr_val > max->spr)
DRM_DEBUG_KMS("Sprite WM%d too large %u (max %u)\n",
level, result->spr_val, max->spr);
if (result->cur_val > max->cur)
DRM_DEBUG_KMS("Cursor WM%d too large %u (max %u)\n",
level, result->cur_val, max->cur);
result->pri_val = min_t(uint32_t, result->pri_val, max->pri);
result->spr_val = min_t(uint32_t, result->spr_val, max->spr);
result->cur_val = min_t(uint32_t, result->cur_val, max->cur);
result->enable = true;
}
return ret;
}
static void ilk_compute_wm_level(const struct drm_i915_private *dev_priv,
const struct intel_crtc *intel_crtc,
int level,
struct intel_crtc_state *cstate,
const struct intel_plane_state *pristate,
const struct intel_plane_state *sprstate,
const struct intel_plane_state *curstate,
struct intel_wm_level *result)
{
uint16_t pri_latency = dev_priv->wm.pri_latency[level];
uint16_t spr_latency = dev_priv->wm.spr_latency[level];
uint16_t cur_latency = dev_priv->wm.cur_latency[level];
/* WM1+ latency values stored in 0.5us units */
if (level > 0) {
pri_latency *= 5;
spr_latency *= 5;
cur_latency *= 5;
}
if (pristate) {
result->pri_val = ilk_compute_pri_wm(cstate, pristate,
pri_latency, level);
result->fbc_val = ilk_compute_fbc_wm(cstate, pristate, result->pri_val);
}
if (sprstate)
result->spr_val = ilk_compute_spr_wm(cstate, sprstate, spr_latency);
if (curstate)
result->cur_val = ilk_compute_cur_wm(cstate, curstate, cur_latency);
result->enable = true;
}
static uint32_t
hsw_compute_linetime_wm(const struct intel_crtc_state *cstate)
{
const struct intel_atomic_state *intel_state =
to_intel_atomic_state(cstate->base.state);
const struct drm_display_mode *adjusted_mode =
&cstate->base.adjusted_mode;
u32 linetime, ips_linetime;
if (!cstate->base.active)
return 0;
if (WARN_ON(adjusted_mode->crtc_clock == 0))
return 0;
if (WARN_ON(intel_state->cdclk.logical.cdclk == 0))
return 0;
/* The WM are computed with base on how long it takes to fill a single
* row at the given clock rate, multiplied by 8.
* */
linetime = DIV_ROUND_CLOSEST(adjusted_mode->crtc_htotal * 1000 * 8,
adjusted_mode->crtc_clock);
ips_linetime = DIV_ROUND_CLOSEST(adjusted_mode->crtc_htotal * 1000 * 8,
intel_state->cdclk.logical.cdclk);
return PIPE_WM_LINETIME_IPS_LINETIME(ips_linetime) |
PIPE_WM_LINETIME_TIME(linetime);
}
static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
uint16_t wm[8])
{
if (INTEL_GEN(dev_priv) >= 9) {
uint32_t val;
int ret, i;
int level, max_level = ilk_wm_max_level(dev_priv);
/* read the first set of memory latencies[0:3] */
val = 0; /* data0 to be programmed to 0 for first set */
mutex_lock(&dev_priv->pcu_lock);
ret = sandybridge_pcode_read(dev_priv,
GEN9_PCODE_READ_MEM_LATENCY,
&val);
mutex_unlock(&dev_priv->pcu_lock);
if (ret) {
DRM_ERROR("SKL Mailbox read error = %d\n", ret);
return;
}
wm[0] = val & GEN9_MEM_LATENCY_LEVEL_MASK;
wm[1] = (val >> GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT) &
GEN9_MEM_LATENCY_LEVEL_MASK;
wm[2] = (val >> GEN9_MEM_LATENCY_LEVEL_2_6_SHIFT) &
GEN9_MEM_LATENCY_LEVEL_MASK;
wm[3] = (val >> GEN9_MEM_LATENCY_LEVEL_3_7_SHIFT) &
GEN9_MEM_LATENCY_LEVEL_MASK;
/* read the second set of memory latencies[4:7] */
val = 1; /* data0 to be programmed to 1 for second set */
mutex_lock(&dev_priv->pcu_lock);
ret = sandybridge_pcode_read(dev_priv,
GEN9_PCODE_READ_MEM_LATENCY,
&val);
mutex_unlock(&dev_priv->pcu_lock);
if (ret) {
DRM_ERROR("SKL Mailbox read error = %d\n", ret);
return;
}
wm[4] = val & GEN9_MEM_LATENCY_LEVEL_MASK;
wm[5] = (val >> GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT) &
GEN9_MEM_LATENCY_LEVEL_MASK;
wm[6] = (val >> GEN9_MEM_LATENCY_LEVEL_2_6_SHIFT) &
GEN9_MEM_LATENCY_LEVEL_MASK;
wm[7] = (val >> GEN9_MEM_LATENCY_LEVEL_3_7_SHIFT) &
GEN9_MEM_LATENCY_LEVEL_MASK;
/*
* If a level n (n > 1) has a 0us latency, all levels m (m >= n)
* need to be disabled. We make sure to sanitize the values out
* of the punit to satisfy this requirement.
*/
for (level = 1; level <= max_level; level++) {
if (wm[level] == 0) {
for (i = level + 1; i <= max_level; i++)
wm[i] = 0;
break;
}
}
/*
* WaWmMemoryReadLatency:skl+,glk
*
* punit doesn't take into account the read latency so we need
* to add 2us to the various latency levels we retrieve from the
* punit when level 0 response data us 0us.
*/
if (wm[0] == 0) {
wm[0] += 2;
for (level = 1; level <= max_level; level++) {
if (wm[level] == 0)
break;
wm[level] += 2;
}
}
/*
* WA Level-0 adjustment for 16GB DIMMs: SKL+
* If we could not get dimm info enable this WA to prevent from
* any underrun. If not able to get Dimm info assume 16GB dimm
* to avoid any underrun.
*/
if (dev_priv->dram_info.is_16gb_dimm)
wm[0] += 1;
} else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
uint64_t sskpd = I915_READ64(MCH_SSKPD);
wm[0] = (sskpd >> 56) & 0xFF;
if (wm[0] == 0)
wm[0] = sskpd & 0xF;
wm[1] = (sskpd >> 4) & 0xFF;
wm[2] = (sskpd >> 12) & 0xFF;
wm[3] = (sskpd >> 20) & 0x1FF;
wm[4] = (sskpd >> 32) & 0x1FF;
} else if (INTEL_GEN(dev_priv) >= 6) {
uint32_t sskpd = I915_READ(MCH_SSKPD);
wm[0] = (sskpd >> SSKPD_WM0_SHIFT) & SSKPD_WM_MASK;
wm[1] = (sskpd >> SSKPD_WM1_SHIFT) & SSKPD_WM_MASK;
wm[2] = (sskpd >> SSKPD_WM2_SHIFT) & SSKPD_WM_MASK;
wm[3] = (sskpd >> SSKPD_WM3_SHIFT) & SSKPD_WM_MASK;
} else if (INTEL_GEN(dev_priv) >= 5) {
uint32_t mltr = I915_READ(MLTR_ILK);
/* ILK primary LP0 latency is 700 ns */
wm[0] = 7;
wm[1] = (mltr >> MLTR_WM1_SHIFT) & ILK_SRLT_MASK;
wm[2] = (mltr >> MLTR_WM2_SHIFT) & ILK_SRLT_MASK;
} else {
MISSING_CASE(INTEL_DEVID(dev_priv));
}
}
static void intel_fixup_spr_wm_latency(struct drm_i915_private *dev_priv,
uint16_t wm[5])
{
/* ILK sprite LP0 latency is 1300 ns */
if (IS_GEN5(dev_priv))
wm[0] = 13;
}
static void intel_fixup_cur_wm_latency(struct drm_i915_private *dev_priv,
uint16_t wm[5])
{
/* ILK cursor LP0 latency is 1300 ns */
if (IS_GEN5(dev_priv))
wm[0] = 13;
}
int ilk_wm_max_level(const struct drm_i915_private *dev_priv)
{
/* how many WM levels are we expecting */
if (INTEL_GEN(dev_priv) >= 9)
return 7;
else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
return 4;
else if (INTEL_GEN(dev_priv) >= 6)
return 3;
else
return 2;
}
static void intel_print_wm_latency(struct drm_i915_private *dev_priv,
const char *name,
const uint16_t wm[8])
{
int level, max_level = ilk_wm_max_level(dev_priv);
for (level = 0; level <= max_level; level++) {
unsigned int latency = wm[level];
if (latency == 0) {
DRM_DEBUG_KMS("%s WM%d latency not provided\n",
name, level);
continue;
}
/*
* - latencies are in us on gen9.
* - before then, WM1+ latency values are in 0.5us units
*/
if (INTEL_GEN(dev_priv) >= 9)
latency *= 10;
else if (level > 0)
latency *= 5;
DRM_DEBUG_KMS("%s WM%d latency %u (%u.%u usec)\n",
name, level, wm[level],
latency / 10, latency % 10);
}
}
static bool ilk_increase_wm_latency(struct drm_i915_private *dev_priv,
uint16_t wm[5], uint16_t min)
{
int level, max_level = ilk_wm_max_level(dev_priv);
if (wm[0] >= min)
return false;
wm[0] = max(wm[0], min);
for (level = 1; level <= max_level; level++)
wm[level] = max_t(uint16_t, wm[level], DIV_ROUND_UP(min, 5));
return true;
}
static void snb_wm_latency_quirk(struct drm_i915_private *dev_priv)
{
bool changed;
/*
* The BIOS provided WM memory latency values are often
* inadequate for high resolution displays. Adjust them.
*/
changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12) |
ilk_increase_wm_latency(dev_priv, dev_priv->wm.spr_latency, 12) |
ilk_increase_wm_latency(dev_priv, dev_priv->wm.cur_latency, 12);
if (!changed)
return;
DRM_DEBUG_KMS("WM latency values increased to avoid potential underruns\n");
intel_print_wm_latency(dev_priv, "Primary", dev_priv->wm.pri_latency);
intel_print_wm_latency(dev_priv, "Sprite", dev_priv->wm.spr_latency);
intel_print_wm_latency(dev_priv, "Cursor", dev_priv->wm.cur_latency);
}
drm/i915: Disable LP3 watermarks on all SNB machines I have a Thinkpad X220 Tablet in my hands that is losing vblank interrupts whenever LP3 watermarks are used. If I nudge the latency value written to the WM3 register just by one in either direction the problem disappears. That to me suggests that the punit will not enter the corrsponding powersave mode (MPLL shutdown IIRC) unless the latency value in the register matches exactly what we read from SSKPD. Ie. it's not really a latency value but rather just a cookie by which the punit can identify the desired power saving state. On HSW/BDW this was changed such that we actually just write the WM level number into those bits, which makes much more sense given the observed behaviour. We could try to handle this by disallowing LP3 watermarks only when vblank interrupts are enabled but we'd first have to prove that only vblank interrupts are affected, which seems unlikely. Also we can't grab the wm mutex from the vblank enable/disable hooks because those are called with various spinlocks held. Thus we'd have to redesigne the watermark locking. So to play it safe and keep the code simple we simply disable LP3 watermarks on all SNB machines. To do that we simply zero out the latency values for watermark level 3, and we adjust the watermark computation to check for that. The behaviour now matches that of the g4x/vlv/skl wm code in the presence of a zeroed latency value. v2: s/USHRT_MAX/U32_MAX/ for consistency with the types (Chris) Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101269 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103713 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114173440.6730-1-ville.syrjala@linux.intel.com
2018-11-14 10:34:40 -07:00
static void snb_wm_lp3_irq_quirk(struct drm_i915_private *dev_priv)
{
/*
* On some SNB machines (Thinkpad X220 Tablet at least)
* LP3 usage can cause vblank interrupts to be lost.
* The DEIIR bit will go high but it looks like the CPU
* never gets interrupted.
*
* It's not clear whether other interrupt source could
* be affected or if this is somehow limited to vblank
* interrupts only. To play it safe we disable LP3
* watermarks entirely.
*/
if (dev_priv->wm.pri_latency[3] == 0 &&
dev_priv->wm.spr_latency[3] == 0 &&
dev_priv->wm.cur_latency[3] == 0)
return;
dev_priv->wm.pri_latency[3] = 0;
dev_priv->wm.spr_latency[3] = 0;
dev_priv->wm.cur_latency[3] = 0;
DRM_DEBUG_KMS("LP3 watermarks disabled due to potential for lost interrupts\n");
intel_print_wm_latency(dev_priv, "Primary", dev_priv->wm.pri_latency);
intel_print_wm_latency(dev_priv, "Sprite", dev_priv->wm.spr_latency);
intel_print_wm_latency(dev_priv, "Cursor", dev_priv->wm.cur_latency);
}
static void ilk_setup_wm_latency(struct drm_i915_private *dev_priv)
{
intel_read_wm_latency(dev_priv, dev_priv->wm.pri_latency);
memcpy(dev_priv->wm.spr_latency, dev_priv->wm.pri_latency,
sizeof(dev_priv->wm.pri_latency));
memcpy(dev_priv->wm.cur_latency, dev_priv->wm.pri_latency,
sizeof(dev_priv->wm.pri_latency));
intel_fixup_spr_wm_latency(dev_priv, dev_priv->wm.spr_latency);
intel_fixup_cur_wm_latency(dev_priv, dev_priv->wm.cur_latency);
intel_print_wm_latency(dev_priv, "Primary", dev_priv->wm.pri_latency);
intel_print_wm_latency(dev_priv, "Sprite", dev_priv->wm.spr_latency);
intel_print_wm_latency(dev_priv, "Cursor", dev_priv->wm.cur_latency);
drm/i915: Disable LP3 watermarks on all SNB machines I have a Thinkpad X220 Tablet in my hands that is losing vblank interrupts whenever LP3 watermarks are used. If I nudge the latency value written to the WM3 register just by one in either direction the problem disappears. That to me suggests that the punit will not enter the corrsponding powersave mode (MPLL shutdown IIRC) unless the latency value in the register matches exactly what we read from SSKPD. Ie. it's not really a latency value but rather just a cookie by which the punit can identify the desired power saving state. On HSW/BDW this was changed such that we actually just write the WM level number into those bits, which makes much more sense given the observed behaviour. We could try to handle this by disallowing LP3 watermarks only when vblank interrupts are enabled but we'd first have to prove that only vblank interrupts are affected, which seems unlikely. Also we can't grab the wm mutex from the vblank enable/disable hooks because those are called with various spinlocks held. Thus we'd have to redesigne the watermark locking. So to play it safe and keep the code simple we simply disable LP3 watermarks on all SNB machines. To do that we simply zero out the latency values for watermark level 3, and we adjust the watermark computation to check for that. The behaviour now matches that of the g4x/vlv/skl wm code in the presence of a zeroed latency value. v2: s/USHRT_MAX/U32_MAX/ for consistency with the types (Chris) Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101269 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103713 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114173440.6730-1-ville.syrjala@linux.intel.com
2018-11-14 10:34:40 -07:00
if (IS_GEN6(dev_priv)) {
snb_wm_latency_quirk(dev_priv);
drm/i915: Disable LP3 watermarks on all SNB machines I have a Thinkpad X220 Tablet in my hands that is losing vblank interrupts whenever LP3 watermarks are used. If I nudge the latency value written to the WM3 register just by one in either direction the problem disappears. That to me suggests that the punit will not enter the corrsponding powersave mode (MPLL shutdown IIRC) unless the latency value in the register matches exactly what we read from SSKPD. Ie. it's not really a latency value but rather just a cookie by which the punit can identify the desired power saving state. On HSW/BDW this was changed such that we actually just write the WM level number into those bits, which makes much more sense given the observed behaviour. We could try to handle this by disallowing LP3 watermarks only when vblank interrupts are enabled but we'd first have to prove that only vblank interrupts are affected, which seems unlikely. Also we can't grab the wm mutex from the vblank enable/disable hooks because those are called with various spinlocks held. Thus we'd have to redesigne the watermark locking. So to play it safe and keep the code simple we simply disable LP3 watermarks on all SNB machines. To do that we simply zero out the latency values for watermark level 3, and we adjust the watermark computation to check for that. The behaviour now matches that of the g4x/vlv/skl wm code in the presence of a zeroed latency value. v2: s/USHRT_MAX/U32_MAX/ for consistency with the types (Chris) Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101269 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103713 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114173440.6730-1-ville.syrjala@linux.intel.com
2018-11-14 10:34:40 -07:00
snb_wm_lp3_irq_quirk(dev_priv);
}
}
static void skl_setup_wm_latency(struct drm_i915_private *dev_priv)
{
intel_read_wm_latency(dev_priv, dev_priv->wm.skl_latency);
intel_print_wm_latency(dev_priv, "Gen9 Plane", dev_priv->wm.skl_latency);
}
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
static bool ilk_validate_pipe_wm(struct drm_device *dev,
struct intel_pipe_wm *pipe_wm)
{
/* LP0 watermark maximums depend on this pipe alone */
const struct intel_wm_config config = {
.num_pipes_active = 1,
.sprites_enabled = pipe_wm->sprites_enabled,
.sprites_scaled = pipe_wm->sprites_scaled,
};
struct ilk_wm_maximums max;
/* LP0 watermarks always use 1/2 DDB partitioning */
ilk_compute_wm_maximums(dev, 0, &config, INTEL_DDB_PART_1_2, &max);
/* At least LP0 must be valid */
if (!ilk_validate_wm_level(0, &max, &pipe_wm->wm[0])) {
DRM_DEBUG_KMS("LP0 watermark invalid\n");
return false;
}
return true;
}
/* Compute new watermarks for the pipe */
static int ilk_compute_pipe_wm(struct intel_crtc_state *cstate)
{
struct drm_atomic_state *state = cstate->base.state;
struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-24 16:53:16 -06:00
struct intel_pipe_wm *pipe_wm;
struct drm_device *dev = state->dev;
const struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_plane *plane;
const struct drm_plane_state *plane_state;
const struct intel_plane_state *pristate = NULL;
const struct intel_plane_state *sprstate = NULL;
const struct intel_plane_state *curstate = NULL;
int level, max_level = ilk_wm_max_level(dev_priv), usable_level;
struct ilk_wm_maximums max;
pipe_wm = &cstate->wm.ilk.optimal;
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-24 16:53:16 -06:00
drm_atomic_crtc_state_for_each_plane_state(plane, plane_state, &cstate->base) {
const struct intel_plane_state *ps = to_intel_plane_state(plane_state);
if (plane->type == DRM_PLANE_TYPE_PRIMARY)
pristate = ps;
else if (plane->type == DRM_PLANE_TYPE_OVERLAY)
sprstate = ps;
else if (plane->type == DRM_PLANE_TYPE_CURSOR)
curstate = ps;
}
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
pipe_wm->pipe_enabled = cstate->base.active;
if (sprstate) {
pipe_wm->sprites_enabled = sprstate->base.visible;
pipe_wm->sprites_scaled = sprstate->base.visible &&
(drm_rect_width(&sprstate->base.dst) != drm_rect_width(&sprstate->base.src) >> 16 ||
drm_rect_height(&sprstate->base.dst) != drm_rect_height(&sprstate->base.src) >> 16);
}
usable_level = max_level;
/* ILK/SNB: LP2+ watermarks only w/o sprites */
if (INTEL_GEN(dev_priv) <= 6 && pipe_wm->sprites_enabled)
usable_level = 1;
/* ILK/SNB/IVB: LP1+ watermarks only w/o scaling */
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
if (pipe_wm->sprites_scaled)
usable_level = 0;
drm/i915: Only use sanitized values for ILK watermarks The raw watermark values are needed when planes are not part of the state, but this introduced a regression and possibly an overflow when merging the watermarks because invalid values may end up used. Solve this by calculating raw watermarks for all levels, and only setting non-zero values when the level is valid. Fixes the SNB warning: WARNING: CPU: 1 PID: 25405 at drivers/gpu/drm/i915/intel_pm.c:2580 ilk_program_watermarks+0x7b2/0x9d0 [i915]() WARN_ON(wm_lp != 1) Modules linked in: i915 drm_kms_helper drm bluetooth fuse iTCO_wdt iTCO_vendor_support syscopyarea sysfillrect sysimgblt fb_sys_fops tpm_tis mei_me e1000e snd_hda_codec_hdmi pcspkr tpm mei i2c_i801 lpc_ich snd_hda_codec snd_hda_core CPU: 1 PID: 25405 Comm: kms_universal_p Tainted: G U W 4.5.0-rc6apollolake+ #462 Hardware name: /DH67GD, BIOS BLH6710H.86A.0160.2012.1204.1156 12/04/2012 0000000000000000 ffff88009d42b918 ffffffff8143cfab ffff88009d42b960 ffffffffa0363580 ffff88009d42b950 ffffffff81082746 ffff8800b9a24928 ffff88009d42ba00 ffff88009d4a0000 0000000000000000 ffff88009d42ba6c Call Trace: [<ffffffff8143cfab>] dump_stack+0x4d/0x72 [<ffffffff81082746>] warn_slowpath_common+0x86/0xc0 [<ffffffff810827cc>] warn_slowpath_fmt+0x4c/0x50 [<ffffffffa0292862>] ilk_program_watermarks+0x7b2/0x9d0 [i915] [<ffffffffa0292cb7>] ilk_initial_watermarks+0x107/0x120 [i915] [<ffffffffa02feffa>] intel_pre_plane_update+0x12a/0x190 [i915] [<ffffffffa02ffb36>] intel_atomic_commit+0x546/0xd50 [i915] [<ffffffffa012c9e7>] drm_atomic_commit+0x37/0x60 [drm] [<ffffffffa0217361>] drm_atomic_helper_disable_plane+0xb1/0xf0 [drm_kms_helper] [<ffffffffa011cdb4>] __setplane_internal+0x184/0x280 [drm] [<ffffffffa012b57a>] ? drm_modeset_lock_all_ctx+0x9a/0xb0 [drm] [<ffffffffa012010f>] drm_mode_setplane+0x13f/0x1c0 [drm] [<ffffffffa0111b52>] drm_ioctl+0x142/0x590 [drm] [<ffffffffa011ffd0>] ? drm_plane_check_pixel_format+0x50/0x50 [drm] [<ffffffff811f2744>] ? mntput+0x24/0x40 [<ffffffff811d28d4>] ? __fput+0x194/0x200 [<ffffffffa012dec3>] drm_compat_ioctl+0x33/0x40 [drm] [<ffffffffa029e1c2>] i915_compat_ioctl+0x32/0x40 [i915] [<ffffffff81228d72>] compat_SyS_ioctl+0xc2/0x330 [<ffffffff810021d5>] ? exit_to_usermode_loop+0x95/0xb0 [<ffffffff81002d2e>] do_fast_syscall_32+0x9e/0x210 [<ffffffff8197faf2>] entry_SYSENTER_compat+0x52/0x70 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Testcase: kms_universal_plane Fixes: d81f04c5ef ("drm/i915: Allow preservation of watermarks, v2.") Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/56DEA1FC.8080703@linux.intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-03-08 02:57:16 -07:00
memset(&pipe_wm->wm, 0, sizeof(pipe_wm->wm));
ilk_compute_wm_level(dev_priv, intel_crtc, 0, cstate,
pristate, sprstate, curstate, &pipe_wm->wm[0]);
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
pipe_wm->linetime = hsw_compute_linetime_wm(cstate);
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
if (!ilk_validate_pipe_wm(dev, pipe_wm))
return -EINVAL;
ilk_compute_wm_reg_maximums(dev_priv, 1, &max);
for (level = 1; level <= usable_level; level++) {
struct intel_wm_level *wm = &pipe_wm->wm[level];
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-24 16:53:16 -06:00
ilk_compute_wm_level(dev_priv, intel_crtc, level, cstate,
pristate, sprstate, curstate, wm);
/*
* Disable any watermark level that exceeds the
* register maximums since such watermarks are
* always invalid.
*/
if (!ilk_validate_wm_level(level, &max, wm)) {
memset(wm, 0, sizeof(*wm));
break;
}
}
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-24 16:53:16 -06:00
return 0;
}
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
/*
* Build a set of 'intermediate' watermark values that satisfy both the old
* state and the new state. These can be programmed to the hardware
* immediately.
*/
static int ilk_compute_intermediate_wm(struct drm_device *dev,
struct intel_crtc *intel_crtc,
struct intel_crtc_state *newstate)
{
struct intel_pipe_wm *a = &newstate->wm.ilk.intermediate;
struct intel_atomic_state *intel_state =
to_intel_atomic_state(newstate->base.state);
const struct intel_crtc_state *oldstate =
intel_atomic_get_old_crtc_state(intel_state, intel_crtc);
const struct intel_pipe_wm *b = &oldstate->wm.ilk.optimal;
int level, max_level = ilk_wm_max_level(to_i915(dev));
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
/*
* Start with the final, target watermarks, then combine with the
* currently active watermarks to get values that are safe both before
* and after the vblank.
*/
*a = newstate->wm.ilk.optimal;
if (!newstate->base.active || drm_atomic_crtc_needs_modeset(&newstate->base) ||
intel_state->skip_intermediate_wm)
return 0;
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
a->pipe_enabled |= b->pipe_enabled;
a->sprites_enabled |= b->sprites_enabled;
a->sprites_scaled |= b->sprites_scaled;
for (level = 0; level <= max_level; level++) {
struct intel_wm_level *a_wm = &a->wm[level];
const struct intel_wm_level *b_wm = &b->wm[level];
a_wm->enable &= b_wm->enable;
a_wm->pri_val = max(a_wm->pri_val, b_wm->pri_val);
a_wm->spr_val = max(a_wm->spr_val, b_wm->spr_val);
a_wm->cur_val = max(a_wm->cur_val, b_wm->cur_val);
a_wm->fbc_val = max(a_wm->fbc_val, b_wm->fbc_val);
}
/*
* We need to make sure that these merged watermark values are
* actually a valid configuration themselves. If they're not,
* there's no safe way to transition from the old state to
* the new state, so we need to fail the atomic transaction.
*/
if (!ilk_validate_pipe_wm(dev, a))
return -EINVAL;
/*
* If our intermediate WM are identical to the final WM, then we can
* omit the post-vblank programming; only update if it's different.
*/
if (memcmp(a, &newstate->wm.ilk.optimal, sizeof(*a)) != 0)
newstate->wm.need_postvbl_update = true;
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
return 0;
}
/*
* Merge the watermarks from all active pipes for a specific level.
*/
static void ilk_merge_wm_level(struct drm_device *dev,
int level,
struct intel_wm_level *ret_wm)
{
const struct intel_crtc *intel_crtc;
ret_wm->enable = true;
for_each_intel_crtc(dev, intel_crtc) {
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
const struct intel_pipe_wm *active = &intel_crtc->wm.active.ilk;
const struct intel_wm_level *wm = &active->wm[level];
if (!active->pipe_enabled)
continue;
/*
* The watermark values may have been used in the past,
* so we must maintain them in the registers for some
* time even if the level is now disabled.
*/
if (!wm->enable)
ret_wm->enable = false;
ret_wm->pri_val = max(ret_wm->pri_val, wm->pri_val);
ret_wm->spr_val = max(ret_wm->spr_val, wm->spr_val);
ret_wm->cur_val = max(ret_wm->cur_val, wm->cur_val);
ret_wm->fbc_val = max(ret_wm->fbc_val, wm->fbc_val);
}
}
/*
* Merge all low power watermarks for all active pipes.
*/
static void ilk_wm_merge(struct drm_device *dev,
const struct intel_wm_config *config,
const struct ilk_wm_maximums *max,
struct intel_pipe_wm *merged)
{
struct drm_i915_private *dev_priv = to_i915(dev);
int level, max_level = ilk_wm_max_level(dev_priv);
int last_enabled_level = max_level;
/* ILK/SNB/IVB: LP1+ watermarks only w/ single pipe */
if ((INTEL_GEN(dev_priv) <= 6 || IS_IVYBRIDGE(dev_priv)) &&
config->num_pipes_active > 1)
last_enabled_level = 0;
/* ILK: FBC WM must be disabled always */
merged->fbc_wm_enabled = INTEL_GEN(dev_priv) >= 6;
/* merge each WM1+ level */
for (level = 1; level <= max_level; level++) {
struct intel_wm_level *wm = &merged->wm[level];
ilk_merge_wm_level(dev, level, wm);
if (level > last_enabled_level)
wm->enable = false;
else if (!ilk_validate_wm_level(level, max, wm))
/* make sure all following levels get disabled */
last_enabled_level = level - 1;
/*
* The spec says it is preferred to disable
* FBC WMs instead of disabling a WM level.
*/
if (wm->fbc_val > max->fbc) {
if (wm->enable)
merged->fbc_wm_enabled = false;
wm->fbc_val = 0;
}
}
/* ILK: LP2+ must be disabled when FBC WM is disabled but FBC enabled */
/*
* FIXME this is racy. FBC might get enabled later.
* What we should check here is whether FBC can be
* enabled sometime later.
*/
if (IS_GEN5(dev_priv) && !merged->fbc_wm_enabled &&
intel_fbc_is_active(dev_priv)) {
for (level = 2; level <= max_level; level++) {
struct intel_wm_level *wm = &merged->wm[level];
wm->enable = false;
}
}
}
static int ilk_wm_lp_to_level(int wm_lp, const struct intel_pipe_wm *pipe_wm)
{
/* LP1,LP2,LP3 levels are either 1,2,3 or 1,3,4 */
return wm_lp + (wm_lp >= 2 && pipe_wm->wm[4].enable);
}
/* The value we need to program into the WM_LPx latency field */
static unsigned int ilk_wm_lp_latency(struct drm_device *dev, int level)
{
struct drm_i915_private *dev_priv = to_i915(dev);
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
return 2 * level;
else
return dev_priv->wm.pri_latency[level];
}
static void ilk_compute_wm_results(struct drm_device *dev,
const struct intel_pipe_wm *merged,
enum intel_ddb_partitioning partitioning,
struct ilk_wm_values *results)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_crtc *intel_crtc;
int level, wm_lp;
results->enable_fbc_wm = merged->fbc_wm_enabled;
results->partitioning = partitioning;
/* LP1+ register values */
for (wm_lp = 1; wm_lp <= 3; wm_lp++) {
const struct intel_wm_level *r;
level = ilk_wm_lp_to_level(wm_lp, merged);
r = &merged->wm[level];
/*
* Maintain the watermark values even if the level is
* disabled. Doing otherwise could cause underruns.
*/
results->wm_lp[wm_lp - 1] =
(ilk_wm_lp_latency(dev, level) << WM1_LP_LATENCY_SHIFT) |
(r->pri_val << WM1_LP_SR_SHIFT) |
r->cur_val;
if (r->enable)
results->wm_lp[wm_lp - 1] |= WM1_LP_SR_EN;
if (INTEL_GEN(dev_priv) >= 8)
results->wm_lp[wm_lp - 1] |=
r->fbc_val << WM1_LP_FBC_SHIFT_BDW;
else
results->wm_lp[wm_lp - 1] |=
r->fbc_val << WM1_LP_FBC_SHIFT;
/*
* Always set WM1S_LP_EN when spr_val != 0, even if the
* level is disabled. Doing otherwise could cause underruns.
*/
if (INTEL_GEN(dev_priv) <= 6 && r->spr_val) {
WARN_ON(wm_lp != 1);
results->wm_lp_spr[wm_lp - 1] = WM1S_LP_EN | r->spr_val;
} else
results->wm_lp_spr[wm_lp - 1] = r->spr_val;
}
/* LP0 register values */
for_each_intel_crtc(dev, intel_crtc) {
enum pipe pipe = intel_crtc->pipe;
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
const struct intel_wm_level *r =
&intel_crtc->wm.active.ilk.wm[0];
if (WARN_ON(!r->enable))
continue;
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
results->wm_linetime[pipe] = intel_crtc->wm.active.ilk.linetime;
results->wm_pipe[pipe] =
(r->pri_val << WM0_PIPE_PLANE_SHIFT) |
(r->spr_val << WM0_PIPE_SPRITE_SHIFT) |
r->cur_val;
}
}
/* Find the result with the highest level enabled. Check for enable_fbc_wm in
* case both are at the same level. Prefer r1 in case they're the same. */
static struct intel_pipe_wm *ilk_find_best_result(struct drm_device *dev,
struct intel_pipe_wm *r1,
struct intel_pipe_wm *r2)
{
int level, max_level = ilk_wm_max_level(to_i915(dev));
int level1 = 0, level2 = 0;
for (level = 1; level <= max_level; level++) {
if (r1->wm[level].enable)
level1 = level;
if (r2->wm[level].enable)
level2 = level;
}
if (level1 == level2) {
if (r2->fbc_wm_enabled && !r1->fbc_wm_enabled)
return r2;
else
return r1;
} else if (level1 > level2) {
return r1;
} else {
return r2;
}
}
/* dirty bits used to track which watermarks need changes */
#define WM_DIRTY_PIPE(pipe) (1 << (pipe))
#define WM_DIRTY_LINETIME(pipe) (1 << (8 + (pipe)))
#define WM_DIRTY_LP(wm_lp) (1 << (15 + (wm_lp)))
#define WM_DIRTY_LP_ALL (WM_DIRTY_LP(1) | WM_DIRTY_LP(2) | WM_DIRTY_LP(3))
#define WM_DIRTY_FBC (1 << 24)
#define WM_DIRTY_DDB (1 << 25)
static unsigned int ilk_compute_wm_dirty(struct drm_i915_private *dev_priv,
const struct ilk_wm_values *old,
const struct ilk_wm_values *new)
{
unsigned int dirty = 0;
enum pipe pipe;
int wm_lp;
for_each_pipe(dev_priv, pipe) {
if (old->wm_linetime[pipe] != new->wm_linetime[pipe]) {
dirty |= WM_DIRTY_LINETIME(pipe);
/* Must disable LP1+ watermarks too */
dirty |= WM_DIRTY_LP_ALL;
}
if (old->wm_pipe[pipe] != new->wm_pipe[pipe]) {
dirty |= WM_DIRTY_PIPE(pipe);
/* Must disable LP1+ watermarks too */
dirty |= WM_DIRTY_LP_ALL;
}
}
if (old->enable_fbc_wm != new->enable_fbc_wm) {
dirty |= WM_DIRTY_FBC;
/* Must disable LP1+ watermarks too */
dirty |= WM_DIRTY_LP_ALL;
}
if (old->partitioning != new->partitioning) {
dirty |= WM_DIRTY_DDB;
/* Must disable LP1+ watermarks too */
dirty |= WM_DIRTY_LP_ALL;
}
/* LP1+ watermarks already deemed dirty, no need to continue */
if (dirty & WM_DIRTY_LP_ALL)
return dirty;
/* Find the lowest numbered LP1+ watermark in need of an update... */
for (wm_lp = 1; wm_lp <= 3; wm_lp++) {
if (old->wm_lp[wm_lp - 1] != new->wm_lp[wm_lp - 1] ||
old->wm_lp_spr[wm_lp - 1] != new->wm_lp_spr[wm_lp - 1])
break;
}
/* ...and mark it and all higher numbered LP1+ watermarks as dirty */
for (; wm_lp <= 3; wm_lp++)
dirty |= WM_DIRTY_LP(wm_lp);
return dirty;
}
static bool _ilk_disable_lp_wm(struct drm_i915_private *dev_priv,
unsigned int dirty)
{
struct ilk_wm_values *previous = &dev_priv->wm.hw;
bool changed = false;
if (dirty & WM_DIRTY_LP(3) && previous->wm_lp[2] & WM1_LP_SR_EN) {
previous->wm_lp[2] &= ~WM1_LP_SR_EN;
I915_WRITE(WM3_LP_ILK, previous->wm_lp[2]);
changed = true;
}
if (dirty & WM_DIRTY_LP(2) && previous->wm_lp[1] & WM1_LP_SR_EN) {
previous->wm_lp[1] &= ~WM1_LP_SR_EN;
I915_WRITE(WM2_LP_ILK, previous->wm_lp[1]);
changed = true;
}
if (dirty & WM_DIRTY_LP(1) && previous->wm_lp[0] & WM1_LP_SR_EN) {
previous->wm_lp[0] &= ~WM1_LP_SR_EN;
I915_WRITE(WM1_LP_ILK, previous->wm_lp[0]);
changed = true;
}
/*
* Don't touch WM1S_LP_EN here.
* Doing so could cause underruns.
*/
return changed;
}
/*
* The spec says we shouldn't write when we don't need, because every write
* causes WMs to be re-evaluated, expending some power.
*/
static void ilk_write_wm_values(struct drm_i915_private *dev_priv,
struct ilk_wm_values *results)
{
struct ilk_wm_values *previous = &dev_priv->wm.hw;
unsigned int dirty;
uint32_t val;
dirty = ilk_compute_wm_dirty(dev_priv, previous, results);
if (!dirty)
return;
_ilk_disable_lp_wm(dev_priv, dirty);
if (dirty & WM_DIRTY_PIPE(PIPE_A))
I915_WRITE(WM0_PIPEA_ILK, results->wm_pipe[0]);
if (dirty & WM_DIRTY_PIPE(PIPE_B))
I915_WRITE(WM0_PIPEB_ILK, results->wm_pipe[1]);
if (dirty & WM_DIRTY_PIPE(PIPE_C))
I915_WRITE(WM0_PIPEC_IVB, results->wm_pipe[2]);
if (dirty & WM_DIRTY_LINETIME(PIPE_A))
I915_WRITE(PIPE_WM_LINETIME(PIPE_A), results->wm_linetime[0]);
if (dirty & WM_DIRTY_LINETIME(PIPE_B))
I915_WRITE(PIPE_WM_LINETIME(PIPE_B), results->wm_linetime[1]);
if (dirty & WM_DIRTY_LINETIME(PIPE_C))
I915_WRITE(PIPE_WM_LINETIME(PIPE_C), results->wm_linetime[2]);
if (dirty & WM_DIRTY_DDB) {
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
val = I915_READ(WM_MISC);
if (results->partitioning == INTEL_DDB_PART_1_2)
val &= ~WM_MISC_DATA_PARTITION_5_6;
else
val |= WM_MISC_DATA_PARTITION_5_6;
I915_WRITE(WM_MISC, val);
} else {
val = I915_READ(DISP_ARB_CTL2);
if (results->partitioning == INTEL_DDB_PART_1_2)
val &= ~DISP_DATA_PARTITION_5_6;
else
val |= DISP_DATA_PARTITION_5_6;
I915_WRITE(DISP_ARB_CTL2, val);
}
}
if (dirty & WM_DIRTY_FBC) {
val = I915_READ(DISP_ARB_CTL);
if (results->enable_fbc_wm)
val &= ~DISP_FBC_WM_DIS;
else
val |= DISP_FBC_WM_DIS;
I915_WRITE(DISP_ARB_CTL, val);
}
if (dirty & WM_DIRTY_LP(1) &&
previous->wm_lp_spr[0] != results->wm_lp_spr[0])
I915_WRITE(WM1S_LP_ILK, results->wm_lp_spr[0]);
if (INTEL_GEN(dev_priv) >= 7) {
if (dirty & WM_DIRTY_LP(2) && previous->wm_lp_spr[1] != results->wm_lp_spr[1])
I915_WRITE(WM2S_LP_IVB, results->wm_lp_spr[1]);
if (dirty & WM_DIRTY_LP(3) && previous->wm_lp_spr[2] != results->wm_lp_spr[2])
I915_WRITE(WM3S_LP_IVB, results->wm_lp_spr[2]);
}
if (dirty & WM_DIRTY_LP(1) && previous->wm_lp[0] != results->wm_lp[0])
I915_WRITE(WM1_LP_ILK, results->wm_lp[0]);
if (dirty & WM_DIRTY_LP(2) && previous->wm_lp[1] != results->wm_lp[1])
I915_WRITE(WM2_LP_ILK, results->wm_lp[1]);
if (dirty & WM_DIRTY_LP(3) && previous->wm_lp[2] != results->wm_lp[2])
I915_WRITE(WM3_LP_ILK, results->wm_lp[2]);
dev_priv->wm.hw = *results;
}
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
bool ilk_disable_lp_wm(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
return _ilk_disable_lp_wm(dev_priv, WM_DIRTY_LP_ALL);
}
static u8 intel_enabled_dbuf_slices_num(struct drm_i915_private *dev_priv)
{
u8 enabled_slices;
/* Slice 1 will always be enabled */
enabled_slices = 1;
/* Gen prior to GEN11 have only one DBuf slice */
if (INTEL_GEN(dev_priv) < 11)
return enabled_slices;
if (I915_READ(DBUF_CTL_S2) & DBUF_POWER_STATE)
enabled_slices++;
return enabled_slices;
}
drm/i915/gen9: unconditionally apply the memory bandwidth WA Mahesh Kumar is already working on a proper implementation for the workaround, but while we still don't have it, let's just unconditionally apply the workaround for everybody and we hope we can close all those numerous bugzilla tickets. Also, I'm not sure how easy it will be to backport the final implementation to the stable Kernels, and this patch here is probably easier to backport. At the present moment I still don't have confirmation that this patch fixes any of the bugs listed below, but we should definitely try testing all of them again. v2: s/intel_needs_memory_bw_wa/skl_needs_memory_bw_wa/ (Lyude). v3: Rebase (dev -> dev_priv change on ilk_wm_max_level). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94337 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94884 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95010 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97830 Cc: stable@vger.kernel.org Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Lyude <cpaul@redhat.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476210338-9797-1-git-send-email-paulo.r.zanoni@intel.com
2016-10-11 12:25:38 -06:00
/*
* FIXME: We still don't have the proper code detect if we need to apply the WA,
* so assume we'll always need it in order to avoid underruns.
*/
static bool skl_needs_memory_bw_wa(struct intel_atomic_state *state)
{
struct drm_i915_private *dev_priv = to_i915(state->base.dev);
if (IS_GEN9_BC(dev_priv) || IS_BROXTON(dev_priv))
drm/i915/gen9: unconditionally apply the memory bandwidth WA Mahesh Kumar is already working on a proper implementation for the workaround, but while we still don't have it, let's just unconditionally apply the workaround for everybody and we hope we can close all those numerous bugzilla tickets. Also, I'm not sure how easy it will be to backport the final implementation to the stable Kernels, and this patch here is probably easier to backport. At the present moment I still don't have confirmation that this patch fixes any of the bugs listed below, but we should definitely try testing all of them again. v2: s/intel_needs_memory_bw_wa/skl_needs_memory_bw_wa/ (Lyude). v3: Rebase (dev -> dev_priv change on ilk_wm_max_level). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94337 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94884 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95010 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97830 Cc: stable@vger.kernel.org Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Lyude <cpaul@redhat.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476210338-9797-1-git-send-email-paulo.r.zanoni@intel.com
2016-10-11 12:25:38 -06:00
return true;
return false;
}
static bool
intel_has_sagv(struct drm_i915_private *dev_priv)
{
return (IS_GEN9_BC(dev_priv) || INTEL_GEN(dev_priv) >= 10) &&
dev_priv->sagv_status != I915_SAGV_NOT_CONTROLLED;
}
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
/*
* SAGV dynamically adjusts the system agent voltage and clock frequencies
* depending on power and performance requirements. The display engine access
* to system memory is blocked during the adjustment time. Because of the
* blocking time, having this enabled can cause full system hangs and/or pipe
* underruns if we don't meet all of the following requirements:
*
* - <= 1 pipe enabled
* - All planes can enable watermarks for latencies >= SAGV engine block time
* - We're not using an interlaced display configuration
*/
int
intel_enable_sagv(struct drm_i915_private *dev_priv)
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
{
int ret;
if (!intel_has_sagv(dev_priv))
return 0;
if (dev_priv->sagv_status == I915_SAGV_ENABLED)
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
return 0;
DRM_DEBUG_KMS("Enabling the SAGV\n");
mutex_lock(&dev_priv->pcu_lock);
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
ret = sandybridge_pcode_write(dev_priv, GEN9_PCODE_SAGV_CONTROL,
GEN9_SAGV_ENABLE);
/* We don't need to wait for the SAGV when enabling */
mutex_unlock(&dev_priv->pcu_lock);
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
/*
* Some skl systems, pre-release machines in particular,
* don't actually have an SAGV.
*/
if (IS_SKYLAKE(dev_priv) && ret == -ENXIO) {
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
DRM_DEBUG_DRIVER("No SAGV found on system, ignoring\n");
dev_priv->sagv_status = I915_SAGV_NOT_CONTROLLED;
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
return 0;
} else if (ret < 0) {
DRM_ERROR("Failed to enable the SAGV\n");
return ret;
}
dev_priv->sagv_status = I915_SAGV_ENABLED;
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
return 0;
}
int
intel_disable_sagv(struct drm_i915_private *dev_priv)
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
{
int ret;
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
if (!intel_has_sagv(dev_priv))
return 0;
if (dev_priv->sagv_status == I915_SAGV_DISABLED)
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
return 0;
DRM_DEBUG_KMS("Disabling the SAGV\n");
mutex_lock(&dev_priv->pcu_lock);
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
/* bspec says to keep retrying for at least 1 ms */
ret = skl_pcode_request(dev_priv, GEN9_PCODE_SAGV_CONTROL,
GEN9_SAGV_DISABLE,
GEN9_SAGV_IS_DISABLED, GEN9_SAGV_IS_DISABLED,
1);
mutex_unlock(&dev_priv->pcu_lock);
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
/*
* Some skl systems, pre-release machines in particular,
* don't actually have an SAGV.
*/
if (IS_SKYLAKE(dev_priv) && ret == -ENXIO) {
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
DRM_DEBUG_DRIVER("No SAGV found on system, ignoring\n");
dev_priv->sagv_status = I915_SAGV_NOT_CONTROLLED;
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
return 0;
} else if (ret < 0) {
DRM_ERROR("Failed to disable the SAGV (%d)\n", ret);
return ret;
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
}
dev_priv->sagv_status = I915_SAGV_DISABLED;
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
return 0;
}
bool intel_can_enable_sagv(struct drm_atomic_state *state)
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
{
struct drm_device *dev = state->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
drm/i915/gen9: unconditionally apply the memory bandwidth WA Mahesh Kumar is already working on a proper implementation for the workaround, but while we still don't have it, let's just unconditionally apply the workaround for everybody and we hope we can close all those numerous bugzilla tickets. Also, I'm not sure how easy it will be to backport the final implementation to the stable Kernels, and this patch here is probably easier to backport. At the present moment I still don't have confirmation that this patch fixes any of the bugs listed below, but we should definitely try testing all of them again. v2: s/intel_needs_memory_bw_wa/skl_needs_memory_bw_wa/ (Lyude). v3: Rebase (dev -> dev_priv change on ilk_wm_max_level). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94337 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94884 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95010 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97830 Cc: stable@vger.kernel.org Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Lyude <cpaul@redhat.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476210338-9797-1-git-send-email-paulo.r.zanoni@intel.com
2016-10-11 12:25:38 -06:00
struct intel_crtc *crtc;
struct intel_plane *plane;
struct intel_crtc_state *cstate;
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
enum pipe pipe;
int level, latency;
int sagv_block_time_us;
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
if (!intel_has_sagv(dev_priv))
return false;
if (IS_GEN9(dev_priv))
sagv_block_time_us = 30;
else if (IS_GEN10(dev_priv))
sagv_block_time_us = 20;
else
sagv_block_time_us = 10;
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
/*
* SKL+ workaround: bspec recommends we disable the SAGV when we have
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
* more then one pipe enabled
*
* If there are no active CRTCs, no additional checks need be performed
*/
if (hweight32(intel_state->active_crtcs) == 0)
return true;
else if (hweight32(intel_state->active_crtcs) > 1)
return false;
/* Since we're now guaranteed to only have one active CRTC... */
pipe = ffs(intel_state->active_crtcs) - 1;
crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
cstate = to_intel_crtc_state(crtc->base.state);
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
if (crtc->base.state->adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
return false;
drm/i915/gen9: unconditionally apply the memory bandwidth WA Mahesh Kumar is already working on a proper implementation for the workaround, but while we still don't have it, let's just unconditionally apply the workaround for everybody and we hope we can close all those numerous bugzilla tickets. Also, I'm not sure how easy it will be to backport the final implementation to the stable Kernels, and this patch here is probably easier to backport. At the present moment I still don't have confirmation that this patch fixes any of the bugs listed below, but we should definitely try testing all of them again. v2: s/intel_needs_memory_bw_wa/skl_needs_memory_bw_wa/ (Lyude). v3: Rebase (dev -> dev_priv change on ilk_wm_max_level). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94337 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94884 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95010 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97830 Cc: stable@vger.kernel.org Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Lyude <cpaul@redhat.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476210338-9797-1-git-send-email-paulo.r.zanoni@intel.com
2016-10-11 12:25:38 -06:00
for_each_intel_plane_on_crtc(dev, crtc, plane) {
struct skl_plane_wm *wm =
&cstate->wm.skl.optimal.planes[plane->id];
drm/i915/gen9: unconditionally apply the memory bandwidth WA Mahesh Kumar is already working on a proper implementation for the workaround, but while we still don't have it, let's just unconditionally apply the workaround for everybody and we hope we can close all those numerous bugzilla tickets. Also, I'm not sure how easy it will be to backport the final implementation to the stable Kernels, and this patch here is probably easier to backport. At the present moment I still don't have confirmation that this patch fixes any of the bugs listed below, but we should definitely try testing all of them again. v2: s/intel_needs_memory_bw_wa/skl_needs_memory_bw_wa/ (Lyude). v3: Rebase (dev -> dev_priv change on ilk_wm_max_level). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94337 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94884 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95010 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97830 Cc: stable@vger.kernel.org Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Lyude <cpaul@redhat.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476210338-9797-1-git-send-email-paulo.r.zanoni@intel.com
2016-10-11 12:25:38 -06:00
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
/* Skip this plane if it's not enabled */
if (!wm->wm[0].plane_en)
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
continue;
/* Find the highest enabled wm level for this plane */
for (level = ilk_wm_max_level(dev_priv);
!wm->wm[level].plane_en; --level)
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
{ }
drm/i915/gen9: unconditionally apply the memory bandwidth WA Mahesh Kumar is already working on a proper implementation for the workaround, but while we still don't have it, let's just unconditionally apply the workaround for everybody and we hope we can close all those numerous bugzilla tickets. Also, I'm not sure how easy it will be to backport the final implementation to the stable Kernels, and this patch here is probably easier to backport. At the present moment I still don't have confirmation that this patch fixes any of the bugs listed below, but we should definitely try testing all of them again. v2: s/intel_needs_memory_bw_wa/skl_needs_memory_bw_wa/ (Lyude). v3: Rebase (dev -> dev_priv change on ilk_wm_max_level). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94337 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94884 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95010 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97830 Cc: stable@vger.kernel.org Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Lyude <cpaul@redhat.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476210338-9797-1-git-send-email-paulo.r.zanoni@intel.com
2016-10-11 12:25:38 -06:00
latency = dev_priv->wm.skl_latency[level];
if (skl_needs_memory_bw_wa(intel_state) &&
drm: Nuke modifier[1-3] It has been suggested that having per-plane modifiers is making life more difficult for userspace, so let's just retire modifier[1-3] and use modifier[0] to apply to the entire framebuffer. Obviosuly this means that if individual planes need different tiling layouts and whatnot we will need a new modifier for each combination of planes with different tiling layouts. For a bit of extra backwards compatilbilty the kernel will allow non-zero modifier[1+] but it require that they will match modifier[0]. This in case there's existing userspace out there that sets modifier[1+] to something non-zero with planar formats. Mostly a cocci job, with a bit of manual stuff mixed in. @@ struct drm_framebuffer *fb; expression E; @@ - fb->modifier[E] + fb->modifier @@ struct drm_framebuffer fb; expression E; @@ - fb.modifier[E] + fb.modifier Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tomeu Vizoso <tomeu@tomeuvizoso.net> Cc: dczaplejewicz@collabora.co.uk Suggested-by: Kristian Høgsberg <hoegsberg@gmail.com> Acked-by: Ben Widawsky <ben@bwidawsk.net> Acked-by: Daniel Stone <daniels@collabora.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1479295996-26246-1-git-send-email-ville.syrjala@linux.intel.com
2016-11-16 04:33:16 -07:00
plane->base.state->fb->modifier ==
drm/i915/gen9: unconditionally apply the memory bandwidth WA Mahesh Kumar is already working on a proper implementation for the workaround, but while we still don't have it, let's just unconditionally apply the workaround for everybody and we hope we can close all those numerous bugzilla tickets. Also, I'm not sure how easy it will be to backport the final implementation to the stable Kernels, and this patch here is probably easier to backport. At the present moment I still don't have confirmation that this patch fixes any of the bugs listed below, but we should definitely try testing all of them again. v2: s/intel_needs_memory_bw_wa/skl_needs_memory_bw_wa/ (Lyude). v3: Rebase (dev -> dev_priv change on ilk_wm_max_level). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94337 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94884 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95010 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97830 Cc: stable@vger.kernel.org Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Lyude <cpaul@redhat.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476210338-9797-1-git-send-email-paulo.r.zanoni@intel.com
2016-10-11 12:25:38 -06:00
I915_FORMAT_MOD_X_TILED)
latency += 15;
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
/*
* If any of the planes on this pipe don't enable wm levels that
* incur memory latencies higher than sagv_block_time_us we
* can't enable the SAGV.
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
*/
if (latency < sagv_block_time_us)
drm/i915/skl: Add support for the SAGV, fix underrun hangs Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
2016-08-17 13:55:54 -06:00
return false;
}
return true;
}
static u16 intel_get_ddb_size(struct drm_i915_private *dev_priv,
const struct intel_crtc_state *cstate,
const u64 total_data_rate,
const int num_active,
struct skl_ddb_allocation *ddb)
{
const struct drm_display_mode *adjusted_mode;
u64 total_data_bw;
u16 ddb_size = INTEL_INFO(dev_priv)->ddb_size;
WARN_ON(ddb_size == 0);
if (INTEL_GEN(dev_priv) < 11)
return ddb_size - 4; /* 4 blocks for bypass path allocation */
adjusted_mode = &cstate->base.adjusted_mode;
total_data_bw = total_data_rate * drm_mode_vrefresh(adjusted_mode);
/*
* 12GB/s is maximum BW supported by single DBuf slice.
*/
if (num_active > 1 || total_data_bw >= GBps(12)) {
ddb->enabled_slices = 2;
} else {
ddb->enabled_slices = 1;
ddb_size /= 2;
}
return ddb_size;
}
static void
skl_ddb_get_pipe_allocation_limits(struct drm_i915_private *dev_priv,
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-24 16:53:11 -06:00
const struct intel_crtc_state *cstate,
const u64 total_data_rate,
struct skl_ddb_allocation *ddb,
2016-05-12 08:06:01 -06:00
struct skl_ddb_entry *alloc, /* out */
int *num_active /* out */)
{
2016-05-12 08:06:01 -06:00
struct drm_atomic_state *state = cstate->base.state;
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-24 16:53:11 -06:00
struct drm_crtc *for_crtc = cstate->base.crtc;
const struct drm_crtc_state *crtc_state;
const struct drm_crtc *crtc;
u32 pipe_width = 0, total_width = 0, width_before_pipe = 0;
enum pipe for_pipe = to_intel_crtc(for_crtc)->pipe;
u16 ddb_size;
u32 i;
2016-05-12 08:06:01 -06:00
if (WARN_ON(!state) || !cstate->base.active) {
alloc->start = 0;
alloc->end = 0;
*num_active = hweight32(dev_priv->active_crtcs);
return;
}
if (intel_state->active_pipe_changes)
*num_active = hweight32(intel_state->active_crtcs);
else
*num_active = hweight32(dev_priv->active_crtcs);
ddb_size = intel_get_ddb_size(dev_priv, cstate, total_data_rate,
*num_active, ddb);
2016-05-12 08:06:01 -06:00
/*
* If the state doesn't change the active CRTC's or there is no
* modeset request, then there's no need to recalculate;
* the existing pipe allocation limits should remain unchanged.
* Note that we're safe from racing commits since any racing commit
* that changes the active CRTC list or do modeset would need to
* grab _all_ crtc locks, including the one we currently hold.
2016-05-12 08:06:01 -06:00
*/
if (!intel_state->active_pipe_changes && !intel_state->modeset) {
/*
* alloc may be cleared by clear_intel_crtc_state,
* copy from old state to be sure
*/
*alloc = to_intel_crtc_state(for_crtc->state)->wm.skl.ddb;
return;
2016-05-12 08:06:01 -06:00
}
/*
* Watermark/ddb requirement highly depends upon width of the
* framebuffer, So instead of allocating DDB equally among pipes
* distribute DDB based on resolution/width of the display.
*/
for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
const struct drm_display_mode *adjusted_mode;
int hdisplay, vdisplay;
enum pipe pipe;
if (!crtc_state->enable)
continue;
pipe = to_intel_crtc(crtc)->pipe;
adjusted_mode = &crtc_state->adjusted_mode;
drm_mode_get_hv_timing(adjusted_mode, &hdisplay, &vdisplay);
total_width += hdisplay;
if (pipe < for_pipe)
width_before_pipe += hdisplay;
else if (pipe == for_pipe)
pipe_width = hdisplay;
}
alloc->start = ddb_size * width_before_pipe / total_width;
alloc->end = ddb_size * (width_before_pipe + pipe_width) / total_width;
}
2016-05-12 08:06:01 -06:00
static unsigned int skl_cursor_allocation(int num_active)
{
2016-05-12 08:06:01 -06:00
if (num_active == 1)
return 32;
return 8;
}
static void skl_ddb_entry_init_from_hw(struct drm_i915_private *dev_priv,
struct skl_ddb_entry *entry, u32 reg)
{
u16 mask;
if (INTEL_GEN(dev_priv) >= 11)
mask = ICL_DDB_ENTRY_MASK;
else
mask = SKL_DDB_ENTRY_MASK;
entry->start = reg & mask;
entry->end = (reg >> DDB_ENTRY_END_SHIFT) & mask;
if (entry->end)
entry->end += 1;
}
static void
skl_ddb_get_hw_plane_state(struct drm_i915_private *dev_priv,
const enum pipe pipe,
const enum plane_id plane_id,
struct skl_ddb_entry *ddb_y,
struct skl_ddb_entry *ddb_uv)
{
u32 val, val2;
u32 fourcc = 0;
/* Cursor doesn't support NV12/planar, so no extra calculation needed */
if (plane_id == PLANE_CURSOR) {
val = I915_READ(CUR_BUF_CFG(pipe));
skl_ddb_entry_init_from_hw(dev_priv, ddb_y, val);
return;
}
val = I915_READ(PLANE_CTL(pipe, plane_id));
/* No DDB allocated for disabled planes */
if (val & PLANE_CTL_ENABLE)
fourcc = skl_format_to_fourcc(val & PLANE_CTL_FORMAT_MASK,
val & PLANE_CTL_ORDER_RGBX,
val & PLANE_CTL_ALPHA_MASK);
if (INTEL_GEN(dev_priv) >= 11) {
val = I915_READ(PLANE_BUF_CFG(pipe, plane_id));
skl_ddb_entry_init_from_hw(dev_priv, ddb_y, val);
} else {
val = I915_READ(PLANE_BUF_CFG(pipe, plane_id));
val2 = I915_READ(PLANE_NV12_BUF_CFG(pipe, plane_id));
if (fourcc == DRM_FORMAT_NV12)
swap(val, val2);
skl_ddb_entry_init_from_hw(dev_priv, ddb_y, val);
skl_ddb_entry_init_from_hw(dev_priv, ddb_uv, val2);
}
}
void skl_pipe_ddb_get_hw_state(struct intel_crtc *crtc,
struct skl_ddb_entry *ddb_y,
struct skl_ddb_entry *ddb_uv)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
enum intel_display_power_domain power_domain;
enum pipe pipe = crtc->pipe;
enum plane_id plane_id;
power_domain = POWER_DOMAIN_PIPE(pipe);
if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
return;
for_each_plane_id_on_crtc(crtc, plane_id)
skl_ddb_get_hw_plane_state(dev_priv, pipe,
plane_id,
&ddb_y[plane_id],
&ddb_uv[plane_id]);
intel_display_power_put(dev_priv, power_domain);
}
void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
struct skl_ddb_allocation *ddb /* out */)
{
ddb->enabled_slices = intel_enabled_dbuf_slices_num(dev_priv);
}
/*
* Determines the downscale amount of a plane for the purposes of watermark calculations.
* The bspec defines downscale amount as:
*
* """
* Horizontal down scale amount = maximum[1, Horizontal source size /
* Horizontal destination size]
* Vertical down scale amount = maximum[1, Vertical source size /
* Vertical destination size]
* Total down scale amount = Horizontal down scale amount *
* Vertical down scale amount
* """
*
* Return value is provided in 16.16 fixed point form to retain fractional part.
* Caller should take care of dividing & rounding off the value.
*/
static uint_fixed_16_16_t
skl_plane_downscale_amount(const struct intel_crtc_state *cstate,
const struct intel_plane_state *pstate)
{
struct intel_plane *plane = to_intel_plane(pstate->base.plane);
uint32_t src_w, src_h, dst_w, dst_h;
uint_fixed_16_16_t fp_w_ratio, fp_h_ratio;
uint_fixed_16_16_t downscale_h, downscale_w;
if (WARN_ON(!intel_wm_plane_visible(cstate, pstate)))
return u32_to_fixed16(0);
/* n.b., src is 16.16 fixed point, dst is whole integer */
if (plane->id == PLANE_CURSOR) {
/*
* Cursors only support 0/180 degree rotation,
* hence no need to account for rotation here.
*/
src_w = pstate->base.src_w >> 16;
src_h = pstate->base.src_h >> 16;
dst_w = pstate->base.crtc_w;
dst_h = pstate->base.crtc_h;
} else {
/*
* Src coordinates are already rotated by 270 degrees for
* the 90/270 degree plane rotation cases (to match the
* GTT mapping), hence no need to account for rotation here.
*/
src_w = drm_rect_width(&pstate->base.src) >> 16;
src_h = drm_rect_height(&pstate->base.src) >> 16;
dst_w = drm_rect_width(&pstate->base.dst);
dst_h = drm_rect_height(&pstate->base.dst);
}
fp_w_ratio = div_fixed16(src_w, dst_w);
fp_h_ratio = div_fixed16(src_h, dst_h);
downscale_w = max_fixed16(fp_w_ratio, u32_to_fixed16(1));
downscale_h = max_fixed16(fp_h_ratio, u32_to_fixed16(1));
return mul_fixed16(downscale_w, downscale_h);
}
drm/i915/skl+: consider max supported plane pixel rate while scaling A display resolution is only supported if it meets all the restrictions below for Maximum Pipe Pixel Rate. The display resolution must fit within the maximum pixel rate output from the pipe. Make sure that the display pipe is able to feed pixels at a rate required to support the desired resolution. For each enabled plane on the pipe { If plane scaling enabled { Horizontal down scale amount = Maximum[1, plane horizontal size / scaler horizontal window size] Vertical down scale amount = Maximum[1, plane vertical size / scaler vertical window size] Plane down scale amount = Horizontal down scale amount * Vertical down scale amount Plane Ratio = 1 / Plane down scale amount } Else { Plane Ratio = 1 } If plane source pixel format is 64 bits per pixel { Plane Ratio = Plane Ratio * 8/9 } } Pipe Ratio = Minimum Plane Ratio of all enabled planes on the pipe If pipe scaling is enabled { Horizontal down scale amount = Maximum[1, pipe horizontal source size / scaler horizontal window size] Vertical down scale amount = Maximum[1, pipe vertical source size / scaler vertical window size] Note: The progressive fetch - interlace display mode is equivalent to a 2.0 vertical down scale Pipe down scale amount = Horizontal down scale amount * Vertical down scale amount Pipe Ratio = Pipe Ratio / Pipe down scale amount } Pipe maximum pixel rate = CDCLK frequency * Pipe Ratio In this patch our calculation is based on pipe downscale amount (plane max downscale amount * pipe downscale amount) instead of Pipe Ratio. So, max supported crtc clock with given scaling = CDCLK / pipe downscale. Flip will fail if, current crtc clock > max supported crct clock with given scaling. Changes since V1: - separate out fixed_16_16 wrapper API definition Changes since V2: - Fix buggy crtc !active condition (Maarten) - use intel_wm_plane_visible wrapper as per Maarten's suggestion Changes since V3: - Change failure return from ERANGE to EINVAL Changes since V4: - Rebase based on previous patch changes Changes since V5: - return EINVAL instead of continue (Maarten) Changes since V6: - Improve commit message - Address review comment Changes since V7: - use !enable instead of !active - rename config variable for consistency (Maarten) Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170526151546.25025-4-mahesh1.kumar@intel.com
2017-05-26 09:15:46 -06:00
static uint_fixed_16_16_t
skl_pipe_downscale_amount(const struct intel_crtc_state *crtc_state)
{
uint_fixed_16_16_t pipe_downscale = u32_to_fixed16(1);
drm/i915/skl+: consider max supported plane pixel rate while scaling A display resolution is only supported if it meets all the restrictions below for Maximum Pipe Pixel Rate. The display resolution must fit within the maximum pixel rate output from the pipe. Make sure that the display pipe is able to feed pixels at a rate required to support the desired resolution. For each enabled plane on the pipe { If plane scaling enabled { Horizontal down scale amount = Maximum[1, plane horizontal size / scaler horizontal window size] Vertical down scale amount = Maximum[1, plane vertical size / scaler vertical window size] Plane down scale amount = Horizontal down scale amount * Vertical down scale amount Plane Ratio = 1 / Plane down scale amount } Else { Plane Ratio = 1 } If plane source pixel format is 64 bits per pixel { Plane Ratio = Plane Ratio * 8/9 } } Pipe Ratio = Minimum Plane Ratio of all enabled planes on the pipe If pipe scaling is enabled { Horizontal down scale amount = Maximum[1, pipe horizontal source size / scaler horizontal window size] Vertical down scale amount = Maximum[1, pipe vertical source size / scaler vertical window size] Note: The progressive fetch - interlace display mode is equivalent to a 2.0 vertical down scale Pipe down scale amount = Horizontal down scale amount * Vertical down scale amount Pipe Ratio = Pipe Ratio / Pipe down scale amount } Pipe maximum pixel rate = CDCLK frequency * Pipe Ratio In this patch our calculation is based on pipe downscale amount (plane max downscale amount * pipe downscale amount) instead of Pipe Ratio. So, max supported crtc clock with given scaling = CDCLK / pipe downscale. Flip will fail if, current crtc clock > max supported crct clock with given scaling. Changes since V1: - separate out fixed_16_16 wrapper API definition Changes since V2: - Fix buggy crtc !active condition (Maarten) - use intel_wm_plane_visible wrapper as per Maarten's suggestion Changes since V3: - Change failure return from ERANGE to EINVAL Changes since V4: - Rebase based on previous patch changes Changes since V5: - return EINVAL instead of continue (Maarten) Changes since V6: - Improve commit message - Address review comment Changes since V7: - use !enable instead of !active - rename config variable for consistency (Maarten) Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170526151546.25025-4-mahesh1.kumar@intel.com
2017-05-26 09:15:46 -06:00
if (!crtc_state->base.enable)
return pipe_downscale;
if (crtc_state->pch_pfit.enabled) {
uint32_t src_w, src_h, dst_w, dst_h;
uint32_t pfit_size = crtc_state->pch_pfit.size;
uint_fixed_16_16_t fp_w_ratio, fp_h_ratio;
uint_fixed_16_16_t downscale_h, downscale_w;
src_w = crtc_state->pipe_src_w;
src_h = crtc_state->pipe_src_h;
dst_w = pfit_size >> 16;
dst_h = pfit_size & 0xffff;
if (!dst_w || !dst_h)
return pipe_downscale;
fp_w_ratio = div_fixed16(src_w, dst_w);
fp_h_ratio = div_fixed16(src_h, dst_h);
downscale_w = max_fixed16(fp_w_ratio, u32_to_fixed16(1));
downscale_h = max_fixed16(fp_h_ratio, u32_to_fixed16(1));
drm/i915/skl+: consider max supported plane pixel rate while scaling A display resolution is only supported if it meets all the restrictions below for Maximum Pipe Pixel Rate. The display resolution must fit within the maximum pixel rate output from the pipe. Make sure that the display pipe is able to feed pixels at a rate required to support the desired resolution. For each enabled plane on the pipe { If plane scaling enabled { Horizontal down scale amount = Maximum[1, plane horizontal size / scaler horizontal window size] Vertical down scale amount = Maximum[1, plane vertical size / scaler vertical window size] Plane down scale amount = Horizontal down scale amount * Vertical down scale amount Plane Ratio = 1 / Plane down scale amount } Else { Plane Ratio = 1 } If plane source pixel format is 64 bits per pixel { Plane Ratio = Plane Ratio * 8/9 } } Pipe Ratio = Minimum Plane Ratio of all enabled planes on the pipe If pipe scaling is enabled { Horizontal down scale amount = Maximum[1, pipe horizontal source size / scaler horizontal window size] Vertical down scale amount = Maximum[1, pipe vertical source size / scaler vertical window size] Note: The progressive fetch - interlace display mode is equivalent to a 2.0 vertical down scale Pipe down scale amount = Horizontal down scale amount * Vertical down scale amount Pipe Ratio = Pipe Ratio / Pipe down scale amount } Pipe maximum pixel rate = CDCLK frequency * Pipe Ratio In this patch our calculation is based on pipe downscale amount (plane max downscale amount * pipe downscale amount) instead of Pipe Ratio. So, max supported crtc clock with given scaling = CDCLK / pipe downscale. Flip will fail if, current crtc clock > max supported crct clock with given scaling. Changes since V1: - separate out fixed_16_16 wrapper API definition Changes since V2: - Fix buggy crtc !active condition (Maarten) - use intel_wm_plane_visible wrapper as per Maarten's suggestion Changes since V3: - Change failure return from ERANGE to EINVAL Changes since V4: - Rebase based on previous patch changes Changes since V5: - return EINVAL instead of continue (Maarten) Changes since V6: - Improve commit message - Address review comment Changes since V7: - use !enable instead of !active - rename config variable for consistency (Maarten) Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170526151546.25025-4-mahesh1.kumar@intel.com
2017-05-26 09:15:46 -06:00
pipe_downscale = mul_fixed16(downscale_w, downscale_h);
}
return pipe_downscale;
}
int skl_check_pipe_max_pixel_rate(struct intel_crtc *intel_crtc,
struct intel_crtc_state *cstate)
{
struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
drm/i915/skl+: consider max supported plane pixel rate while scaling A display resolution is only supported if it meets all the restrictions below for Maximum Pipe Pixel Rate. The display resolution must fit within the maximum pixel rate output from the pipe. Make sure that the display pipe is able to feed pixels at a rate required to support the desired resolution. For each enabled plane on the pipe { If plane scaling enabled { Horizontal down scale amount = Maximum[1, plane horizontal size / scaler horizontal window size] Vertical down scale amount = Maximum[1, plane vertical size / scaler vertical window size] Plane down scale amount = Horizontal down scale amount * Vertical down scale amount Plane Ratio = 1 / Plane down scale amount } Else { Plane Ratio = 1 } If plane source pixel format is 64 bits per pixel { Plane Ratio = Plane Ratio * 8/9 } } Pipe Ratio = Minimum Plane Ratio of all enabled planes on the pipe If pipe scaling is enabled { Horizontal down scale amount = Maximum[1, pipe horizontal source size / scaler horizontal window size] Vertical down scale amount = Maximum[1, pipe vertical source size / scaler vertical window size] Note: The progressive fetch - interlace display mode is equivalent to a 2.0 vertical down scale Pipe down scale amount = Horizontal down scale amount * Vertical down scale amount Pipe Ratio = Pipe Ratio / Pipe down scale amount } Pipe maximum pixel rate = CDCLK frequency * Pipe Ratio In this patch our calculation is based on pipe downscale amount (plane max downscale amount * pipe downscale amount) instead of Pipe Ratio. So, max supported crtc clock with given scaling = CDCLK / pipe downscale. Flip will fail if, current crtc clock > max supported crct clock with given scaling. Changes since V1: - separate out fixed_16_16 wrapper API definition Changes since V2: - Fix buggy crtc !active condition (Maarten) - use intel_wm_plane_visible wrapper as per Maarten's suggestion Changes since V3: - Change failure return from ERANGE to EINVAL Changes since V4: - Rebase based on previous patch changes Changes since V5: - return EINVAL instead of continue (Maarten) Changes since V6: - Improve commit message - Address review comment Changes since V7: - use !enable instead of !active - rename config variable for consistency (Maarten) Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170526151546.25025-4-mahesh1.kumar@intel.com
2017-05-26 09:15:46 -06:00
struct drm_crtc_state *crtc_state = &cstate->base;
struct drm_atomic_state *state = crtc_state->state;
struct drm_plane *plane;
const struct drm_plane_state *pstate;
struct intel_plane_state *intel_pstate;
int crtc_clock, dotclk;
drm/i915/skl+: consider max supported plane pixel rate while scaling A display resolution is only supported if it meets all the restrictions below for Maximum Pipe Pixel Rate. The display resolution must fit within the maximum pixel rate output from the pipe. Make sure that the display pipe is able to feed pixels at a rate required to support the desired resolution. For each enabled plane on the pipe { If plane scaling enabled { Horizontal down scale amount = Maximum[1, plane horizontal size / scaler horizontal window size] Vertical down scale amount = Maximum[1, plane vertical size / scaler vertical window size] Plane down scale amount = Horizontal down scale amount * Vertical down scale amount Plane Ratio = 1 / Plane down scale amount } Else { Plane Ratio = 1 } If plane source pixel format is 64 bits per pixel { Plane Ratio = Plane Ratio * 8/9 } } Pipe Ratio = Minimum Plane Ratio of all enabled planes on the pipe If pipe scaling is enabled { Horizontal down scale amount = Maximum[1, pipe horizontal source size / scaler horizontal window size] Vertical down scale amount = Maximum[1, pipe vertical source size / scaler vertical window size] Note: The progressive fetch - interlace display mode is equivalent to a 2.0 vertical down scale Pipe down scale amount = Horizontal down scale amount * Vertical down scale amount Pipe Ratio = Pipe Ratio / Pipe down scale amount } Pipe maximum pixel rate = CDCLK frequency * Pipe Ratio In this patch our calculation is based on pipe downscale amount (plane max downscale amount * pipe downscale amount) instead of Pipe Ratio. So, max supported crtc clock with given scaling = CDCLK / pipe downscale. Flip will fail if, current crtc clock > max supported crct clock with given scaling. Changes since V1: - separate out fixed_16_16 wrapper API definition Changes since V2: - Fix buggy crtc !active condition (Maarten) - use intel_wm_plane_visible wrapper as per Maarten's suggestion Changes since V3: - Change failure return from ERANGE to EINVAL Changes since V4: - Rebase based on previous patch changes Changes since V5: - return EINVAL instead of continue (Maarten) Changes since V6: - Improve commit message - Address review comment Changes since V7: - use !enable instead of !active - rename config variable for consistency (Maarten) Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170526151546.25025-4-mahesh1.kumar@intel.com
2017-05-26 09:15:46 -06:00
uint32_t pipe_max_pixel_rate;
uint_fixed_16_16_t pipe_downscale;
uint_fixed_16_16_t max_downscale = u32_to_fixed16(1);
drm/i915/skl+: consider max supported plane pixel rate while scaling A display resolution is only supported if it meets all the restrictions below for Maximum Pipe Pixel Rate. The display resolution must fit within the maximum pixel rate output from the pipe. Make sure that the display pipe is able to feed pixels at a rate required to support the desired resolution. For each enabled plane on the pipe { If plane scaling enabled { Horizontal down scale amount = Maximum[1, plane horizontal size / scaler horizontal window size] Vertical down scale amount = Maximum[1, plane vertical size / scaler vertical window size] Plane down scale amount = Horizontal down scale amount * Vertical down scale amount Plane Ratio = 1 / Plane down scale amount } Else { Plane Ratio = 1 } If plane source pixel format is 64 bits per pixel { Plane Ratio = Plane Ratio * 8/9 } } Pipe Ratio = Minimum Plane Ratio of all enabled planes on the pipe If pipe scaling is enabled { Horizontal down scale amount = Maximum[1, pipe horizontal source size / scaler horizontal window size] Vertical down scale amount = Maximum[1, pipe vertical source size / scaler vertical window size] Note: The progressive fetch - interlace display mode is equivalent to a 2.0 vertical down scale Pipe down scale amount = Horizontal down scale amount * Vertical down scale amount Pipe Ratio = Pipe Ratio / Pipe down scale amount } Pipe maximum pixel rate = CDCLK frequency * Pipe Ratio In this patch our calculation is based on pipe downscale amount (plane max downscale amount * pipe downscale amount) instead of Pipe Ratio. So, max supported crtc clock with given scaling = CDCLK / pipe downscale. Flip will fail if, current crtc clock > max supported crct clock with given scaling. Changes since V1: - separate out fixed_16_16 wrapper API definition Changes since V2: - Fix buggy crtc !active condition (Maarten) - use intel_wm_plane_visible wrapper as per Maarten's suggestion Changes since V3: - Change failure return from ERANGE to EINVAL Changes since V4: - Rebase based on previous patch changes Changes since V5: - return EINVAL instead of continue (Maarten) Changes since V6: - Improve commit message - Address review comment Changes since V7: - use !enable instead of !active - rename config variable for consistency (Maarten) Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170526151546.25025-4-mahesh1.kumar@intel.com
2017-05-26 09:15:46 -06:00
if (!cstate->base.enable)
return 0;
drm_atomic_crtc_state_for_each_plane_state(plane, pstate, crtc_state) {
uint_fixed_16_16_t plane_downscale;
uint_fixed_16_16_t fp_9_div_8 = div_fixed16(9, 8);
drm/i915/skl+: consider max supported plane pixel rate while scaling A display resolution is only supported if it meets all the restrictions below for Maximum Pipe Pixel Rate. The display resolution must fit within the maximum pixel rate output from the pipe. Make sure that the display pipe is able to feed pixels at a rate required to support the desired resolution. For each enabled plane on the pipe { If plane scaling enabled { Horizontal down scale amount = Maximum[1, plane horizontal size / scaler horizontal window size] Vertical down scale amount = Maximum[1, plane vertical size / scaler vertical window size] Plane down scale amount = Horizontal down scale amount * Vertical down scale amount Plane Ratio = 1 / Plane down scale amount } Else { Plane Ratio = 1 } If plane source pixel format is 64 bits per pixel { Plane Ratio = Plane Ratio * 8/9 } } Pipe Ratio = Minimum Plane Ratio of all enabled planes on the pipe If pipe scaling is enabled { Horizontal down scale amount = Maximum[1, pipe horizontal source size / scaler horizontal window size] Vertical down scale amount = Maximum[1, pipe vertical source size / scaler vertical window size] Note: The progressive fetch - interlace display mode is equivalent to a 2.0 vertical down scale Pipe down scale amount = Horizontal down scale amount * Vertical down scale amount Pipe Ratio = Pipe Ratio / Pipe down scale amount } Pipe maximum pixel rate = CDCLK frequency * Pipe Ratio In this patch our calculation is based on pipe downscale amount (plane max downscale amount * pipe downscale amount) instead of Pipe Ratio. So, max supported crtc clock with given scaling = CDCLK / pipe downscale. Flip will fail if, current crtc clock > max supported crct clock with given scaling. Changes since V1: - separate out fixed_16_16 wrapper API definition Changes since V2: - Fix buggy crtc !active condition (Maarten) - use intel_wm_plane_visible wrapper as per Maarten's suggestion Changes since V3: - Change failure return from ERANGE to EINVAL Changes since V4: - Rebase based on previous patch changes Changes since V5: - return EINVAL instead of continue (Maarten) Changes since V6: - Improve commit message - Address review comment Changes since V7: - use !enable instead of !active - rename config variable for consistency (Maarten) Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170526151546.25025-4-mahesh1.kumar@intel.com
2017-05-26 09:15:46 -06:00
int bpp;
if (!intel_wm_plane_visible(cstate,
to_intel_plane_state(pstate)))
continue;
if (WARN_ON(!pstate->fb))
return -EINVAL;
intel_pstate = to_intel_plane_state(pstate);
plane_downscale = skl_plane_downscale_amount(cstate,
intel_pstate);
bpp = pstate->fb->format->cpp[0] * 8;
if (bpp == 64)
plane_downscale = mul_fixed16(plane_downscale,
fp_9_div_8);
max_downscale = max_fixed16(plane_downscale, max_downscale);
drm/i915/skl+: consider max supported plane pixel rate while scaling A display resolution is only supported if it meets all the restrictions below for Maximum Pipe Pixel Rate. The display resolution must fit within the maximum pixel rate output from the pipe. Make sure that the display pipe is able to feed pixels at a rate required to support the desired resolution. For each enabled plane on the pipe { If plane scaling enabled { Horizontal down scale amount = Maximum[1, plane horizontal size / scaler horizontal window size] Vertical down scale amount = Maximum[1, plane vertical size / scaler vertical window size] Plane down scale amount = Horizontal down scale amount * Vertical down scale amount Plane Ratio = 1 / Plane down scale amount } Else { Plane Ratio = 1 } If plane source pixel format is 64 bits per pixel { Plane Ratio = Plane Ratio * 8/9 } } Pipe Ratio = Minimum Plane Ratio of all enabled planes on the pipe If pipe scaling is enabled { Horizontal down scale amount = Maximum[1, pipe horizontal source size / scaler horizontal window size] Vertical down scale amount = Maximum[1, pipe vertical source size / scaler vertical window size] Note: The progressive fetch - interlace display mode is equivalent to a 2.0 vertical down scale Pipe down scale amount = Horizontal down scale amount * Vertical down scale amount Pipe Ratio = Pipe Ratio / Pipe down scale amount } Pipe maximum pixel rate = CDCLK frequency * Pipe Ratio In this patch our calculation is based on pipe downscale amount (plane max downscale amount * pipe downscale amount) instead of Pipe Ratio. So, max supported crtc clock with given scaling = CDCLK / pipe downscale. Flip will fail if, current crtc clock > max supported crct clock with given scaling. Changes since V1: - separate out fixed_16_16 wrapper API definition Changes since V2: - Fix buggy crtc !active condition (Maarten) - use intel_wm_plane_visible wrapper as per Maarten's suggestion Changes since V3: - Change failure return from ERANGE to EINVAL Changes since V4: - Rebase based on previous patch changes Changes since V5: - return EINVAL instead of continue (Maarten) Changes since V6: - Improve commit message - Address review comment Changes since V7: - use !enable instead of !active - rename config variable for consistency (Maarten) Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170526151546.25025-4-mahesh1.kumar@intel.com
2017-05-26 09:15:46 -06:00
}
pipe_downscale = skl_pipe_downscale_amount(cstate);
pipe_downscale = mul_fixed16(pipe_downscale, max_downscale);
crtc_clock = crtc_state->adjusted_mode.crtc_clock;
dotclk = to_intel_atomic_state(state)->cdclk.logical.cdclk;
if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10)
dotclk *= 2;
pipe_max_pixel_rate = div_round_up_u32_fixed16(dotclk, pipe_downscale);
drm/i915/skl+: consider max supported plane pixel rate while scaling A display resolution is only supported if it meets all the restrictions below for Maximum Pipe Pixel Rate. The display resolution must fit within the maximum pixel rate output from the pipe. Make sure that the display pipe is able to feed pixels at a rate required to support the desired resolution. For each enabled plane on the pipe { If plane scaling enabled { Horizontal down scale amount = Maximum[1, plane horizontal size / scaler horizontal window size] Vertical down scale amount = Maximum[1, plane vertical size / scaler vertical window size] Plane down scale amount = Horizontal down scale amount * Vertical down scale amount Plane Ratio = 1 / Plane down scale amount } Else { Plane Ratio = 1 } If plane source pixel format is 64 bits per pixel { Plane Ratio = Plane Ratio * 8/9 } } Pipe Ratio = Minimum Plane Ratio of all enabled planes on the pipe If pipe scaling is enabled { Horizontal down scale amount = Maximum[1, pipe horizontal source size / scaler horizontal window size] Vertical down scale amount = Maximum[1, pipe vertical source size / scaler vertical window size] Note: The progressive fetch - interlace display mode is equivalent to a 2.0 vertical down scale Pipe down scale amount = Horizontal down scale amount * Vertical down scale amount Pipe Ratio = Pipe Ratio / Pipe down scale amount } Pipe maximum pixel rate = CDCLK frequency * Pipe Ratio In this patch our calculation is based on pipe downscale amount (plane max downscale amount * pipe downscale amount) instead of Pipe Ratio. So, max supported crtc clock with given scaling = CDCLK / pipe downscale. Flip will fail if, current crtc clock > max supported crct clock with given scaling. Changes since V1: - separate out fixed_16_16 wrapper API definition Changes since V2: - Fix buggy crtc !active condition (Maarten) - use intel_wm_plane_visible wrapper as per Maarten's suggestion Changes since V3: - Change failure return from ERANGE to EINVAL Changes since V4: - Rebase based on previous patch changes Changes since V5: - return EINVAL instead of continue (Maarten) Changes since V6: - Improve commit message - Address review comment Changes since V7: - use !enable instead of !active - rename config variable for consistency (Maarten) Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170526151546.25025-4-mahesh1.kumar@intel.com
2017-05-26 09:15:46 -06:00
if (pipe_max_pixel_rate < crtc_clock) {
DRM_DEBUG_KMS("Max supported pixel clock with scaling exceeded\n");
drm/i915/skl+: consider max supported plane pixel rate while scaling A display resolution is only supported if it meets all the restrictions below for Maximum Pipe Pixel Rate. The display resolution must fit within the maximum pixel rate output from the pipe. Make sure that the display pipe is able to feed pixels at a rate required to support the desired resolution. For each enabled plane on the pipe { If plane scaling enabled { Horizontal down scale amount = Maximum[1, plane horizontal size / scaler horizontal window size] Vertical down scale amount = Maximum[1, plane vertical size / scaler vertical window size] Plane down scale amount = Horizontal down scale amount * Vertical down scale amount Plane Ratio = 1 / Plane down scale amount } Else { Plane Ratio = 1 } If plane source pixel format is 64 bits per pixel { Plane Ratio = Plane Ratio * 8/9 } } Pipe Ratio = Minimum Plane Ratio of all enabled planes on the pipe If pipe scaling is enabled { Horizontal down scale amount = Maximum[1, pipe horizontal source size / scaler horizontal window size] Vertical down scale amount = Maximum[1, pipe vertical source size / scaler vertical window size] Note: The progressive fetch - interlace display mode is equivalent to a 2.0 vertical down scale Pipe down scale amount = Horizontal down scale amount * Vertical down scale amount Pipe Ratio = Pipe Ratio / Pipe down scale amount } Pipe maximum pixel rate = CDCLK frequency * Pipe Ratio In this patch our calculation is based on pipe downscale amount (plane max downscale amount * pipe downscale amount) instead of Pipe Ratio. So, max supported crtc clock with given scaling = CDCLK / pipe downscale. Flip will fail if, current crtc clock > max supported crct clock with given scaling. Changes since V1: - separate out fixed_16_16 wrapper API definition Changes since V2: - Fix buggy crtc !active condition (Maarten) - use intel_wm_plane_visible wrapper as per Maarten's suggestion Changes since V3: - Change failure return from ERANGE to EINVAL Changes since V4: - Rebase based on previous patch changes Changes since V5: - return EINVAL instead of continue (Maarten) Changes since V6: - Improve commit message - Address review comment Changes since V7: - use !enable instead of !active - rename config variable for consistency (Maarten) Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170526151546.25025-4-mahesh1.kumar@intel.com
2017-05-26 09:15:46 -06:00
return -EINVAL;
}
return 0;
}
static u64
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-24 16:53:11 -06:00
skl_plane_relative_data_rate(const struct intel_crtc_state *cstate,
const struct intel_plane_state *intel_pstate,
const int plane)
{
struct intel_plane *intel_plane =
to_intel_plane(intel_pstate->base.plane);
uint32_t data_rate;
uint32_t width = 0, height = 0;
struct drm_framebuffer *fb;
u32 format;
uint_fixed_16_16_t down_scale_amount;
u64 rate;
if (!intel_pstate->base.visible)
return 0;
fb = intel_pstate->base.fb;
drm: Nuke fb->pixel_format Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-14 14:32:55 -07:00
format = fb->format->format;
if (intel_plane->id == PLANE_CURSOR)
return 0;
if (plane == 1 && format != DRM_FORMAT_NV12)
return 0;
/*
* Src coordinates are already rotated by 270 degrees for
* the 90/270 degree plane rotation cases (to match the
* GTT mapping), hence no need to account for rotation here.
*/
width = drm_rect_width(&intel_pstate->base.src) >> 16;
height = drm_rect_height(&intel_pstate->base.src) >> 16;
/* UV plane does 1/2 pixel sub-sampling */
if (plane == 1 && format == DRM_FORMAT_NV12) {
width /= 2;
height /= 2;
}
data_rate = width * height;
down_scale_amount = skl_plane_downscale_amount(cstate, intel_pstate);
rate = mul_round_up_u32_fixed16(data_rate, down_scale_amount);
rate *= fb->format->cpp[plane];
return rate;
}
static u64
skl_get_total_relative_data_rate(struct intel_crtc_state *intel_cstate,
u64 *plane_data_rate,
u64 *uv_plane_data_rate)
{
struct drm_crtc_state *cstate = &intel_cstate->base;
struct drm_atomic_state *state = cstate->state;
struct drm_plane *plane;
const struct drm_plane_state *pstate;
u64 total_data_rate = 0;
if (WARN_ON(!state))
return 0;
/* Calculate and cache data rate for each plane */
drm_atomic_crtc_state_for_each_plane_state(plane, pstate, cstate) {
enum plane_id plane_id = to_intel_plane(plane)->id;
u64 rate;
const struct intel_plane_state *intel_pstate =
to_intel_plane_state(pstate);
/* packed/y */
rate = skl_plane_relative_data_rate(intel_cstate,
intel_pstate, 0);
plane_data_rate[plane_id] = rate;
total_data_rate += rate;
/* uv-plane */
rate = skl_plane_relative_data_rate(intel_cstate,
intel_pstate, 1);
uv_plane_data_rate[plane_id] = rate;
total_data_rate += rate;
}
return total_data_rate;
}
static u64
icl_get_total_relative_data_rate(struct intel_crtc_state *intel_cstate,
u64 *plane_data_rate)
{
struct drm_crtc_state *cstate = &intel_cstate->base;
struct drm_atomic_state *state = cstate->state;
struct drm_plane *plane;
const struct drm_plane_state *pstate;
u64 total_data_rate = 0;
if (WARN_ON(!state))
return 0;
/* Calculate and cache data rate for each plane */
drm_atomic_crtc_state_for_each_plane_state(plane, pstate, cstate) {
const struct intel_plane_state *intel_pstate =
to_intel_plane_state(pstate);
enum plane_id plane_id = to_intel_plane(plane)->id;
u64 rate;
if (!intel_pstate->linked_plane) {
rate = skl_plane_relative_data_rate(intel_cstate,
intel_pstate, 0);
plane_data_rate[plane_id] = rate;
total_data_rate += rate;
} else {
enum plane_id y_plane_id;
/*
* The slave plane might not iterate in
* drm_atomic_crtc_state_for_each_plane_state(),
* and needs the master plane state which may be
* NULL if we try get_new_plane_state(), so we
* always calculate from the master.
*/
if (intel_pstate->slave)
continue;
/* Y plane rate is calculated on the slave */
rate = skl_plane_relative_data_rate(intel_cstate,
intel_pstate, 0);
y_plane_id = intel_pstate->linked_plane->id;
plane_data_rate[y_plane_id] = rate;
total_data_rate += rate;
rate = skl_plane_relative_data_rate(intel_cstate,
intel_pstate, 1);
plane_data_rate[plane_id] = rate;
total_data_rate += rate;
}
}
return total_data_rate;
}
static uint16_t
skl_ddb_min_alloc(const struct drm_plane_state *pstate, const int plane)
{
struct drm_framebuffer *fb = pstate->fb;
struct intel_plane_state *intel_pstate = to_intel_plane_state(pstate);
uint32_t src_w, src_h;
uint32_t min_scanlines = 8;
uint8_t plane_bpp;
if (WARN_ON(!fb))
return 0;
/* For packed formats, and uv-plane, return 0 */
if (plane == 1 && fb->format->format != DRM_FORMAT_NV12)
return 0;
/* For Non Y-tile return 8-blocks */
drm: Nuke modifier[1-3] It has been suggested that having per-plane modifiers is making life more difficult for userspace, so let's just retire modifier[1-3] and use modifier[0] to apply to the entire framebuffer. Obviosuly this means that if individual planes need different tiling layouts and whatnot we will need a new modifier for each combination of planes with different tiling layouts. For a bit of extra backwards compatilbilty the kernel will allow non-zero modifier[1+] but it require that they will match modifier[0]. This in case there's existing userspace out there that sets modifier[1+] to something non-zero with planar formats. Mostly a cocci job, with a bit of manual stuff mixed in. @@ struct drm_framebuffer *fb; expression E; @@ - fb->modifier[E] + fb->modifier @@ struct drm_framebuffer fb; expression E; @@ - fb.modifier[E] + fb.modifier Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tomeu Vizoso <tomeu@tomeuvizoso.net> Cc: dczaplejewicz@collabora.co.uk Suggested-by: Kristian Høgsberg <hoegsberg@gmail.com> Acked-by: Ben Widawsky <ben@bwidawsk.net> Acked-by: Daniel Stone <daniels@collabora.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1479295996-26246-1-git-send-email-ville.syrjala@linux.intel.com
2016-11-16 04:33:16 -07:00
if (fb->modifier != I915_FORMAT_MOD_Y_TILED &&
drm/i915: Add render decompression support SKL+ display engine can scan out certain kinds of compressed surfaces produced by the render engine. This involved telling the display engine the location of the color control surfae (CCS) which describes which parts of the main surface are compressed and which are not. The location of CCS is provided by userspace as just another plane with its own offset. Add the required stuff to validate the user provided AUX plane metadata and convert the user provided linear offset into something the hardware can consume. Due to hardware limitations we require that the main surface and the AUX surface (CCS) be part of the same bo. The hardware also makes life hard by not allowing you to provide separate x/y offsets for the main and AUX surfaces (excpet with NV12), so finding suitable offsets for both requires a bit of work. Assuming we still want keep playing tricks with the offsets. I've just gone with a dumb "search backward for suitable offsets" approach, which is far from optimal, but it works. Also not all planes will be capable of scanning out compressed surfaces, and eg. 90/270 degree rotation is not supported in combination with decompression either. This patch may contain work from at least the following people: * Vandana Kannan <vandana.kannan@intel.com> * Daniel Vetter <daniel@ffwll.ch> * Ben Widawsky <ben@bwidawsk.net> v2: Deal with display workarounds 0390, 0531, 1125 (Paulo) v3: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason) Put the AUX register defines to the correct place Fix up the slightly bogus rotation check v4: Use I915_WRITE_FW() due to plane update locking changes s/return -EINVAL/goto err/ in intel_framebuffer_init() Eliminate a bunch hardcoded numbers in CCS code v5: (By Ben) conflict resolution + - res_blocks += fixed_16_16_to_u32_round_up(y_tile_minimum); + res_blocks += fixed16_to_u32_round_up(y_tile_minimum); v6: (daniels) Fix botched commit message. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Ville Syrjä <ville.syrjala@linux.intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v1) Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Stone <daniels@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170801165817.7063-1-ben@bwidawsk.net
2017-08-01 10:58:13 -06:00
fb->modifier != I915_FORMAT_MOD_Yf_TILED &&
fb->modifier != I915_FORMAT_MOD_Y_TILED_CCS &&
fb->modifier != I915_FORMAT_MOD_Yf_TILED_CCS)
return 8;
/*
* Src coordinates are already rotated by 270 degrees for
* the 90/270 degree plane rotation cases (to match the
* GTT mapping), hence no need to account for rotation here.
*/
src_w = drm_rect_width(&intel_pstate->base.src) >> 16;
src_h = drm_rect_height(&intel_pstate->base.src) >> 16;
/* Halve UV plane width and height for NV12 */
if (plane == 1) {
src_w /= 2;
src_h /= 2;
}
plane_bpp = fb->format->cpp[plane];
if (drm_rotation_90_or_270(pstate->rotation)) {
switch (plane_bpp) {
case 1:
min_scanlines = 32;
break;
case 2:
min_scanlines = 16;
break;
case 4:
min_scanlines = 8;
break;
case 8:
min_scanlines = 4;
break;
default:
WARN(1, "Unsupported pixel depth %u for rotation",
plane_bpp);
min_scanlines = 32;
}
}
return DIV_ROUND_UP((4 * src_w * plane_bpp), 512) * min_scanlines/4 + 3;
}
static void
skl_ddb_calc_min(const struct intel_crtc_state *cstate, int num_active,
uint16_t *minimum, uint16_t *uv_minimum)
{
const struct drm_plane_state *pstate;
struct drm_plane *plane;
drm_atomic_crtc_state_for_each_plane_state(plane, pstate, &cstate->base) {
enum plane_id plane_id = to_intel_plane(plane)->id;
struct intel_plane_state *plane_state = to_intel_plane_state(pstate);
if (plane_id == PLANE_CURSOR)
continue;
/* slave plane must be invisible and calculated from master */
if (!pstate->visible || WARN_ON(plane_state->slave))
continue;
if (!plane_state->linked_plane) {
minimum[plane_id] = skl_ddb_min_alloc(pstate, 0);
uv_minimum[plane_id] = skl_ddb_min_alloc(pstate, 1);
} else {
enum plane_id y_plane_id =
plane_state->linked_plane->id;
minimum[y_plane_id] = skl_ddb_min_alloc(pstate, 0);
minimum[plane_id] = skl_ddb_min_alloc(pstate, 1);
}
}
minimum[PLANE_CURSOR] = skl_cursor_allocation(num_active);
}
2016-05-12 08:06:01 -06:00
static int
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-24 16:53:11 -06:00
skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
struct skl_ddb_allocation *ddb /* out */)
{
2016-05-12 08:06:01 -06:00
struct drm_atomic_state *state = cstate->base.state;
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-24 16:53:11 -06:00
struct drm_crtc *crtc = cstate->base.crtc;
struct drm_i915_private *dev_priv = to_i915(crtc->dev);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct skl_ddb_entry *alloc = &cstate->wm.skl.ddb;
uint16_t alloc_size, start;
uint16_t minimum[I915_MAX_PLANES] = {};
uint16_t uv_minimum[I915_MAX_PLANES] = {};
u64 total_data_rate;
enum plane_id plane_id;
2016-05-12 08:06:01 -06:00
int num_active;
u64 plane_data_rate[I915_MAX_PLANES] = {};
u64 uv_plane_data_rate[I915_MAX_PLANES] = {};
uint16_t total_min_blocks = 0;
drm/i915/gen9: fix DDB partitioning for multi-screen cases With the previous code we were only recomputing the DDB partitioning for the CRTCs included in the atomic commit, so any other active CRTCs would end up having their DDB registers zeroed. In this patch we make sure that the computed state starts as a copy of the current partitioning, and then we only zero the DDBs that we're actually going to recompute. How to reproduce the bug: 1 - Enable the primary plane on pipe A 2 - Enable the primary plane on pipe B 3 - Enable the cursor or sprite plane on pipe A Step 3 will zero the DDB partitioning for pipe B since it's not included in the commit that enabled the cursor or sprite for pipe A. I expect this to fix many FIFO underrun problems on gen9+. v2: - Mention the cursor on the steps to reproduce the problem (Paulo). - Add Testcase tag provided by Maarten (Maarten). Testcase: kms_cursor_legacy.cursorA-vs-flipB-atomic-transitions Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97596 Bugzilla: https://www.phoronix.com/scan.php?page=news_item&px=Intel-Skylake-Multi-Screen-Woes Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475602652-17326-1-git-send-email-paulo.r.zanoni@intel.com
2016-10-04 11:37:32 -06:00
/* Clear the partitioning for disabled planes. */
memset(cstate->wm.skl.plane_ddb_y, 0, sizeof(cstate->wm.skl.plane_ddb_y));
memset(cstate->wm.skl.plane_ddb_uv, 0, sizeof(cstate->wm.skl.plane_ddb_uv));
drm/i915/gen9: fix DDB partitioning for multi-screen cases With the previous code we were only recomputing the DDB partitioning for the CRTCs included in the atomic commit, so any other active CRTCs would end up having their DDB registers zeroed. In this patch we make sure that the computed state starts as a copy of the current partitioning, and then we only zero the DDBs that we're actually going to recompute. How to reproduce the bug: 1 - Enable the primary plane on pipe A 2 - Enable the primary plane on pipe B 3 - Enable the cursor or sprite plane on pipe A Step 3 will zero the DDB partitioning for pipe B since it's not included in the commit that enabled the cursor or sprite for pipe A. I expect this to fix many FIFO underrun problems on gen9+. v2: - Mention the cursor on the steps to reproduce the problem (Paulo). - Add Testcase tag provided by Maarten (Maarten). Testcase: kms_cursor_legacy.cursorA-vs-flipB-atomic-transitions Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97596 Bugzilla: https://www.phoronix.com/scan.php?page=news_item&px=Intel-Skylake-Multi-Screen-Woes Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475602652-17326-1-git-send-email-paulo.r.zanoni@intel.com
2016-10-04 11:37:32 -06:00
if (WARN_ON(!state))
return 0;
2016-05-12 08:06:01 -06:00
if (!cstate->base.active) {
alloc->start = alloc->end = 0;
2016-05-12 08:06:01 -06:00
return 0;
}
if (INTEL_GEN(dev_priv) < 11)
total_data_rate =
skl_get_total_relative_data_rate(cstate,
plane_data_rate,
uv_plane_data_rate);
else
total_data_rate =
icl_get_total_relative_data_rate(cstate,
plane_data_rate);
skl_ddb_get_pipe_allocation_limits(dev_priv, cstate, total_data_rate,
ddb, alloc, &num_active);
alloc_size = skl_ddb_entry_size(alloc);
if (alloc_size == 0)
2016-05-12 08:06:01 -06:00
return 0;
skl_ddb_calc_min(cstate, num_active, minimum, uv_minimum);
/*
* 1. Allocate the mininum required blocks for each active plane
* and allocate the cursor, it doesn't require extra allocation
* proportional to the data rate.
*/
for_each_plane_id_on_crtc(intel_crtc, plane_id) {
total_min_blocks += minimum[plane_id];
total_min_blocks += uv_minimum[plane_id];
}
if (total_min_blocks > alloc_size) {
DRM_DEBUG_KMS("Requested display configuration exceeds system DDB limitations");
DRM_DEBUG_KMS("minimum required %d/%d\n", total_min_blocks,
alloc_size);
return -EINVAL;
}
alloc_size -= total_min_blocks;
cstate->wm.skl.plane_ddb_y[PLANE_CURSOR].start = alloc->end - minimum[PLANE_CURSOR];
cstate->wm.skl.plane_ddb_y[PLANE_CURSOR].end = alloc->end;
/*
* 2. Distribute the remaining space in proportion to the amount of
* data each plane needs to fetch from memory.
*
* FIXME: we may not allocate every single block here.
*/
if (total_data_rate == 0)
2016-05-12 08:06:01 -06:00
return 0;
start = alloc->start;
for_each_plane_id_on_crtc(intel_crtc, plane_id) {
u64 data_rate, uv_data_rate;
uint16_t plane_blocks, uv_plane_blocks;
if (plane_id == PLANE_CURSOR)
continue;
data_rate = plane_data_rate[plane_id];
/*
* allocation for (packed formats) or (uv-plane part of planar format):
* promote the expression to 64 bits to avoid overflowing, the
* result is < available as data_rate / total_data_rate < 1
*/
plane_blocks = minimum[plane_id];
plane_blocks += div64_u64(alloc_size * data_rate, total_data_rate);
2016-05-12 08:06:01 -06:00
/* Leave disabled planes at (0,0) */
if (data_rate) {
cstate->wm.skl.plane_ddb_y[plane_id].start = start;
cstate->wm.skl.plane_ddb_y[plane_id].end = start + plane_blocks;
2016-05-12 08:06:01 -06:00
}
start += plane_blocks;
/* Allocate DDB for UV plane for planar format/NV12 */
uv_data_rate = uv_plane_data_rate[plane_id];
uv_plane_blocks = uv_minimum[plane_id];
uv_plane_blocks += div64_u64(alloc_size * uv_data_rate, total_data_rate);
/* Gen11+ uses a separate plane for UV watermarks */
WARN_ON(INTEL_GEN(dev_priv) >= 11 && uv_plane_blocks);
if (uv_data_rate) {
cstate->wm.skl.plane_ddb_uv[plane_id].start = start;
cstate->wm.skl.plane_ddb_uv[plane_id].end =
start + uv_plane_blocks;
2016-05-12 08:06:01 -06:00
}
start += uv_plane_blocks;
}
2016-05-12 08:06:01 -06:00
return 0;
}
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
/*
* The max latency should be 257 (max the punit can code is 255 and we add 2us
* for the read latency) and cpp should always be <= 8, so that
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
* should allow pixel_rate up to ~2 GHz which seems sufficient since max
* 2xcdclk is 1350 MHz and the pixel rate should never exceed that.
*/
static uint_fixed_16_16_t
skl_wm_method1(const struct drm_i915_private *dev_priv, uint32_t pixel_rate,
uint8_t cpp, uint32_t latency, uint32_t dbuf_block_size)
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
{
uint32_t wm_intermediate_val;
uint_fixed_16_16_t ret;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
if (latency == 0)
return FP_16_16_MAX;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
wm_intermediate_val = latency * pixel_rate * cpp;
ret = div_fixed16(wm_intermediate_val, 1000 * dbuf_block_size);
if (INTEL_GEN(dev_priv) >= 10)
ret = add_fixed16_u32(ret, 1);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
return ret;
}
static uint_fixed_16_16_t skl_wm_method2(uint32_t pixel_rate,
uint32_t pipe_htotal,
uint32_t latency,
uint_fixed_16_16_t plane_blocks_per_line)
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
{
uint32_t wm_intermediate_val;
uint_fixed_16_16_t ret;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
if (latency == 0)
return FP_16_16_MAX;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
wm_intermediate_val = latency * pixel_rate;
wm_intermediate_val = DIV_ROUND_UP(wm_intermediate_val,
pipe_htotal * 1000);
ret = mul_u32_fixed16(wm_intermediate_val, plane_blocks_per_line);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
return ret;
}
static uint_fixed_16_16_t
intel_get_linetime_us(const struct intel_crtc_state *cstate)
{
uint32_t pixel_rate;
uint32_t crtc_htotal;
uint_fixed_16_16_t linetime_us;
if (!cstate->base.active)
return u32_to_fixed16(0);
pixel_rate = cstate->pixel_rate;
if (WARN_ON(pixel_rate == 0))
return u32_to_fixed16(0);
crtc_htotal = cstate->base.adjusted_mode.crtc_htotal;
linetime_us = div_fixed16(crtc_htotal * 1000, pixel_rate);
return linetime_us;
}
static uint32_t
skl_adjusted_plane_pixel_rate(const struct intel_crtc_state *cstate,
const struct intel_plane_state *pstate)
{
uint64_t adjusted_pixel_rate;
uint_fixed_16_16_t downscale_amount;
/* Shouldn't reach here on disabled planes... */
if (WARN_ON(!intel_wm_plane_visible(cstate, pstate)))
return 0;
/*
* Adjusted plane pixel rate is just the pipe's adjusted pixel rate
* with additional adjustments for plane-specific scaling.
*/
adjusted_pixel_rate = cstate->pixel_rate;
downscale_amount = skl_plane_downscale_amount(cstate, pstate);
return mul_round_up_u32_fixed16(adjusted_pixel_rate,
downscale_amount);
}
static int
skl_compute_plane_wm_params(const struct intel_crtc_state *cstate,
const struct intel_plane_state *intel_pstate,
struct skl_wm_params *wp, int color_plane)
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
{
struct intel_plane *plane = to_intel_plane(intel_pstate->base.plane);
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
const struct drm_plane_state *pstate = &intel_pstate->base;
const struct drm_framebuffer *fb = pstate->fb;
uint32_t interm_pbpl;
drm/i915/gen9: unconditionally apply the memory bandwidth WA Mahesh Kumar is already working on a proper implementation for the workaround, but while we still don't have it, let's just unconditionally apply the workaround for everybody and we hope we can close all those numerous bugzilla tickets. Also, I'm not sure how easy it will be to backport the final implementation to the stable Kernels, and this patch here is probably easier to backport. At the present moment I still don't have confirmation that this patch fixes any of the bugs listed below, but we should definitely try testing all of them again. v2: s/intel_needs_memory_bw_wa/skl_needs_memory_bw_wa/ (Lyude). v3: Rebase (dev -> dev_priv change on ilk_wm_max_level). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94337 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94884 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95010 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97830 Cc: stable@vger.kernel.org Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Lyude <cpaul@redhat.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476210338-9797-1-git-send-email-paulo.r.zanoni@intel.com
2016-10-11 12:25:38 -06:00
struct intel_atomic_state *state =
to_intel_atomic_state(cstate->base.state);
bool apply_memory_bw_wa = skl_needs_memory_bw_wa(state);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
/* only NV12 format has two planes */
if (color_plane == 1 && fb->format->format != DRM_FORMAT_NV12) {
DRM_DEBUG_KMS("Non NV12 format have single plane\n");
return -EINVAL;
}
wp->y_tiled = fb->modifier == I915_FORMAT_MOD_Y_TILED ||
fb->modifier == I915_FORMAT_MOD_Yf_TILED ||
fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS;
wp->x_tiled = fb->modifier == I915_FORMAT_MOD_X_TILED;
wp->rc_surface = fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS;
wp->is_planar = fb->format->format == DRM_FORMAT_NV12;
drm/i915/gen9: unconditionally apply the memory bandwidth WA Mahesh Kumar is already working on a proper implementation for the workaround, but while we still don't have it, let's just unconditionally apply the workaround for everybody and we hope we can close all those numerous bugzilla tickets. Also, I'm not sure how easy it will be to backport the final implementation to the stable Kernels, and this patch here is probably easier to backport. At the present moment I still don't have confirmation that this patch fixes any of the bugs listed below, but we should definitely try testing all of them again. v2: s/intel_needs_memory_bw_wa/skl_needs_memory_bw_wa/ (Lyude). v3: Rebase (dev -> dev_priv change on ilk_wm_max_level). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94337 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94884 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95010 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97830 Cc: stable@vger.kernel.org Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Lyude <cpaul@redhat.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476210338-9797-1-git-send-email-paulo.r.zanoni@intel.com
2016-10-11 12:25:38 -06:00
if (plane->id == PLANE_CURSOR) {
wp->width = intel_pstate->base.crtc_w;
} else {
/*
* Src coordinates are already rotated by 270 degrees for
* the 90/270 degree plane rotation cases (to match the
* GTT mapping), hence no need to account for rotation here.
*/
wp->width = drm_rect_width(&intel_pstate->base.src) >> 16;
}
if (color_plane == 1 && wp->is_planar)
wp->width /= 2;
wp->cpp = fb->format->cpp[color_plane];
wp->plane_pixel_rate = skl_adjusted_plane_pixel_rate(cstate,
intel_pstate);
if (INTEL_GEN(dev_priv) >= 11 &&
fb->modifier == I915_FORMAT_MOD_Yf_TILED && wp->cpp == 8)
wp->dbuf_block_size = 256;
else
wp->dbuf_block_size = 512;
Merge tag 'topic/drm-misc-2016-10-24' of git://anongit.freedesktop.org/drm-intel into drm-next First -misc pull for 4.10: - drm_format rework from Laurent - reservation patches from Chris that missed 4.9. - aspect ratio support in infoframe helpers and drm mode/edid code (Shashank Sharma) - rotation rework from Ville (first parts at least) - another attempt at the CRC debugfs interface from Tomeu - piles and piles of misc patches all over * tag 'topic/drm-misc-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (55 commits) drm: Use u64 for intermediate dotclock calculations drm/i915: Use the per-plane rotation property drm/omap: Use per-plane rotation property drm/omap: Set rotation property initial value to BIT(DRM_ROTATE_0) insted of 0 drm/atmel-hlcdc: Use per-plane rotation property drm/arm: Use per-plane rotation property drm: Add support for optional per-plane rotation property drm/atomic: Reject attempts to use multiple rotation angles at once drm: Add drm_rotation_90_or_270() dma-buf/sync_file: hold reference to fence when creating sync_file drm/virtio: kconfig: Fixup white space. drm/fence: release fence reference when canceling event drm/i915: Handle early failure during intel_get_load_detect_pipe drm/fb_cma_helper: do not free fbdev if there is none drm: fix sparse warnings on undeclared symbols in crc debugfs gpu: Remove depends on RESET_CONTROLLER when not a provider i915: don't call drm_atomic_state_put on invalid pointer drm: Don't export the drm_fb_get_bpp_depth() function drm/arm: mali-dp: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp() drm: vmwgfx: Replace drm_fb_get_bpp_depth() with drm_format_info() ...
2016-10-25 00:35:20 -06:00
if (drm_rotation_90_or_270(pstate->rotation)) {
switch (wp->cpp) {
case 1:
wp->y_min_scanlines = 16;
break;
case 2:
wp->y_min_scanlines = 8;
break;
case 4:
wp->y_min_scanlines = 4;
break;
default:
MISSING_CASE(wp->cpp);
return -EINVAL;
}
} else {
wp->y_min_scanlines = 4;
}
if (apply_memory_bw_wa)
wp->y_min_scanlines *= 2;
wp->plane_bytes_per_line = wp->width * wp->cpp;
if (wp->y_tiled) {
interm_pbpl = DIV_ROUND_UP(wp->plane_bytes_per_line *
wp->y_min_scanlines,
wp->dbuf_block_size);
if (INTEL_GEN(dev_priv) >= 10)
interm_pbpl++;
wp->plane_blocks_per_line = div_fixed16(interm_pbpl,
wp->y_min_scanlines);
} else if (wp->x_tiled && IS_GEN9(dev_priv)) {
interm_pbpl = DIV_ROUND_UP(wp->plane_bytes_per_line,
wp->dbuf_block_size);
wp->plane_blocks_per_line = u32_to_fixed16(interm_pbpl);
} else {
interm_pbpl = DIV_ROUND_UP(wp->plane_bytes_per_line,
wp->dbuf_block_size) + 1;
wp->plane_blocks_per_line = u32_to_fixed16(interm_pbpl);
drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations The confusing thing is that plane_blocks_per_line is listed as part of the method 2 calculation but is also used for other things. We calculated it in two different places and different ways: one inside skl_wm_method2() and the other inside skl_compute_plane_wm(). The skl_wm_method2() implementation is the one that matches the specification. With this patch we fix the skl_compute_plane_wm() calculation and just pass it as a parameter to skl_wm_method2(). We also take care to not modify the value of plane_bytes_per_line since we're going to rely on it having a correct value in later patches. This should affect the watermarks for Linear and Y-tiled. From my analysis, it looks like the two plane_blocks_per_line variables got out of sync on 0fda65680e92, but we can't really say that commit was a regression, it looks like just an incomplete fix. There's always the possibility that 0fda65680e92 matched our specification at that time, and then later the specification changed. v2: Try to add a "Fixes" tag (Maarten). Fixes: 0fda65680e92 ("drm/i915/skl: Update watermarks for Y tiling") Cc: stable@vger.kernel.org Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-7-git-send-email-paulo.r.zanoni@intel.com
2016-09-22 15:00:32 -06:00
}
wp->y_tile_minimum = mul_u32_fixed16(wp->y_min_scanlines,
wp->plane_blocks_per_line);
wp->linetime_us = fixed16_to_u32_round_up(
intel_get_linetime_us(cstate));
return 0;
}
static int skl_compute_plane_wm(const struct intel_crtc_state *cstate,
const struct intel_plane_state *intel_pstate,
uint16_t ddb_allocation,
int level,
const struct skl_wm_params *wp,
const struct skl_wm_level *result_prev,
struct skl_wm_level *result /* out */)
{
struct drm_i915_private *dev_priv =
to_i915(intel_pstate->base.plane->dev);
const struct drm_plane_state *pstate = &intel_pstate->base;
uint32_t latency = dev_priv->wm.skl_latency[level];
uint_fixed_16_16_t method1, method2;
uint_fixed_16_16_t selected_result;
uint32_t res_blocks, res_lines;
struct intel_atomic_state *state =
to_intel_atomic_state(cstate->base.state);
bool apply_memory_bw_wa = skl_needs_memory_bw_wa(state);
uint32_t min_disp_buf_needed;
if (latency == 0)
return level == 0 ? -EINVAL : 0;
/* Display WA #1141: kbl,cfl */
if ((IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv) ||
IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_B0)) &&
dev_priv->ipc_enabled)
latency += 4;
if (apply_memory_bw_wa && wp->x_tiled)
latency += 15;
method1 = skl_wm_method1(dev_priv, wp->plane_pixel_rate,
wp->cpp, latency, wp->dbuf_block_size);
method2 = skl_wm_method2(wp->plane_pixel_rate,
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-24 16:53:11 -06:00
cstate->base.adjusted_mode.crtc_htotal,
latency,
wp->plane_blocks_per_line);
if (wp->y_tiled) {
selected_result = max_fixed16(method2, wp->y_tile_minimum);
} else {
if ((wp->cpp * cstate->base.adjusted_mode.crtc_htotal /
wp->dbuf_block_size < 1) &&
(wp->plane_bytes_per_line / wp->dbuf_block_size < 1)) {
selected_result = method2;
} else if (ddb_allocation >=
fixed16_to_u32_round_up(wp->plane_blocks_per_line)) {
if (IS_GEN9(dev_priv) &&
!IS_GEMINILAKE(dev_priv))
selected_result = min_fixed16(method1, method2);
else
selected_result = method2;
} else if (latency >= wp->linetime_us) {
if (IS_GEN9(dev_priv) &&
!IS_GEMINILAKE(dev_priv))
selected_result = min_fixed16(method1, method2);
else
selected_result = method2;
} else {
selected_result = method1;
}
}
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
res_blocks = fixed16_to_u32_round_up(selected_result) + 1;
res_lines = div_round_up_fixed16(selected_result,
wp->plane_blocks_per_line);
drm/i915: Add render decompression support SKL+ display engine can scan out certain kinds of compressed surfaces produced by the render engine. This involved telling the display engine the location of the color control surfae (CCS) which describes which parts of the main surface are compressed and which are not. The location of CCS is provided by userspace as just another plane with its own offset. Add the required stuff to validate the user provided AUX plane metadata and convert the user provided linear offset into something the hardware can consume. Due to hardware limitations we require that the main surface and the AUX surface (CCS) be part of the same bo. The hardware also makes life hard by not allowing you to provide separate x/y offsets for the main and AUX surfaces (excpet with NV12), so finding suitable offsets for both requires a bit of work. Assuming we still want keep playing tricks with the offsets. I've just gone with a dumb "search backward for suitable offsets" approach, which is far from optimal, but it works. Also not all planes will be capable of scanning out compressed surfaces, and eg. 90/270 degree rotation is not supported in combination with decompression either. This patch may contain work from at least the following people: * Vandana Kannan <vandana.kannan@intel.com> * Daniel Vetter <daniel@ffwll.ch> * Ben Widawsky <ben@bwidawsk.net> v2: Deal with display workarounds 0390, 0531, 1125 (Paulo) v3: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason) Put the AUX register defines to the correct place Fix up the slightly bogus rotation check v4: Use I915_WRITE_FW() due to plane update locking changes s/return -EINVAL/goto err/ in intel_framebuffer_init() Eliminate a bunch hardcoded numbers in CCS code v5: (By Ben) conflict resolution + - res_blocks += fixed_16_16_to_u32_round_up(y_tile_minimum); + res_blocks += fixed16_to_u32_round_up(y_tile_minimum); v6: (daniels) Fix botched commit message. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Ville Syrjä <ville.syrjala@linux.intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v1) Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Stone <daniels@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170801165817.7063-1-ben@bwidawsk.net
2017-08-01 10:58:13 -06:00
/* Display WA #1125: skl,bxt,kbl,glk */
if (level == 0 && wp->rc_surface)
res_blocks += fixed16_to_u32_round_up(wp->y_tile_minimum);
drm/i915: Add render decompression support SKL+ display engine can scan out certain kinds of compressed surfaces produced by the render engine. This involved telling the display engine the location of the color control surfae (CCS) which describes which parts of the main surface are compressed and which are not. The location of CCS is provided by userspace as just another plane with its own offset. Add the required stuff to validate the user provided AUX plane metadata and convert the user provided linear offset into something the hardware can consume. Due to hardware limitations we require that the main surface and the AUX surface (CCS) be part of the same bo. The hardware also makes life hard by not allowing you to provide separate x/y offsets for the main and AUX surfaces (excpet with NV12), so finding suitable offsets for both requires a bit of work. Assuming we still want keep playing tricks with the offsets. I've just gone with a dumb "search backward for suitable offsets" approach, which is far from optimal, but it works. Also not all planes will be capable of scanning out compressed surfaces, and eg. 90/270 degree rotation is not supported in combination with decompression either. This patch may contain work from at least the following people: * Vandana Kannan <vandana.kannan@intel.com> * Daniel Vetter <daniel@ffwll.ch> * Ben Widawsky <ben@bwidawsk.net> v2: Deal with display workarounds 0390, 0531, 1125 (Paulo) v3: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason) Put the AUX register defines to the correct place Fix up the slightly bogus rotation check v4: Use I915_WRITE_FW() due to plane update locking changes s/return -EINVAL/goto err/ in intel_framebuffer_init() Eliminate a bunch hardcoded numbers in CCS code v5: (By Ben) conflict resolution + - res_blocks += fixed_16_16_to_u32_round_up(y_tile_minimum); + res_blocks += fixed16_to_u32_round_up(y_tile_minimum); v6: (daniels) Fix botched commit message. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Ville Syrjä <ville.syrjala@linux.intel.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v1) Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Stone <daniels@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170801165817.7063-1-ben@bwidawsk.net
2017-08-01 10:58:13 -06:00
/* Display WA #1126: skl,bxt,kbl,glk */
if (level >= 1 && level <= 7) {
if (wp->y_tiled) {
res_blocks += fixed16_to_u32_round_up(
wp->y_tile_minimum);
res_lines += wp->y_min_scanlines;
} else {
res_blocks++;
}
/*
* Make sure result blocks for higher latency levels are atleast
* as high as level below the current level.
* Assumption in DDB algorithm optimization for special cases.
* Also covers Display WA #1125 for RC.
*/
if (result_prev->plane_res_b > res_blocks)
res_blocks = result_prev->plane_res_b;
}
if (INTEL_GEN(dev_priv) >= 11) {
if (wp->y_tiled) {
uint32_t extra_lines;
uint_fixed_16_16_t fp_min_disp_buf_needed;
if (res_lines % wp->y_min_scanlines == 0)
extra_lines = wp->y_min_scanlines;
else
extra_lines = wp->y_min_scanlines * 2 -
res_lines % wp->y_min_scanlines;
fp_min_disp_buf_needed = mul_u32_fixed16(res_lines +
extra_lines,
wp->plane_blocks_per_line);
min_disp_buf_needed = fixed16_to_u32_round_up(
fp_min_disp_buf_needed);
} else {
min_disp_buf_needed = DIV_ROUND_UP(res_blocks * 11, 10);
}
} else {
min_disp_buf_needed = res_blocks;
}
if ((level > 0 && res_lines > 31) ||
res_blocks >= ddb_allocation ||
min_disp_buf_needed >= ddb_allocation) {
/*
* If there are no valid level 0 watermarks, then we can't
* support this display configuration.
*/
if (level) {
return 0;
} else {
struct drm_plane *plane = pstate->plane;
DRM_DEBUG_KMS("Requested display configuration exceeds system watermark limitations\n");
DRM_DEBUG_KMS("[PLANE:%d:%s] blocks required = %u/%u, lines required = %u/31\n",
plane->base.id, plane->name,
res_blocks, ddb_allocation, res_lines);
return -EINVAL;
}
}
/* The number of lines are ignored for the level 0 watermark. */
result->plane_res_b = res_blocks;
result->plane_res_l = res_lines;
result->plane_en = true;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
return 0;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
}
static int
skl_compute_wm_levels(const struct intel_crtc_state *cstate,
const struct intel_plane_state *intel_pstate,
uint16_t ddb_blocks,
const struct skl_wm_params *wm_params,
struct skl_wm_level *levels)
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
{
struct drm_i915_private *dev_priv =
to_i915(intel_pstate->base.plane->dev);
int level, max_level = ilk_wm_max_level(dev_priv);
struct skl_wm_level *result_prev = &levels[0];
int ret;
for (level = 0; level <= max_level; level++) {
struct skl_wm_level *result = &levels[level];
ret = skl_compute_plane_wm(cstate,
intel_pstate,
ddb_blocks,
level,
wm_params,
result_prev,
result);
if (ret)
return ret;
result_prev = result;
}
return 0;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
}
static uint32_t
skl_compute_linetime_wm(const struct intel_crtc_state *cstate)
{
struct drm_atomic_state *state = cstate->base.state;
struct drm_i915_private *dev_priv = to_i915(state->dev);
uint_fixed_16_16_t linetime_us;
uint32_t linetime_wm;
linetime_us = intel_get_linetime_us(cstate);
if (is_fixed16_zero(linetime_us))
return 0;
linetime_wm = fixed16_to_u32_round_up(mul_u32_fixed16(8, linetime_us));
/* Display WA #1135: bxt:ALL GLK:ALL */
if ((IS_BROXTON(dev_priv) || IS_GEMINILAKE(dev_priv)) &&
dev_priv->ipc_enabled)
linetime_wm /= 2;
return linetime_wm;
}
static void skl_compute_transition_wm(const struct intel_crtc_state *cstate,
const struct skl_wm_params *wp,
struct skl_plane_wm *wm,
uint16_t ddb_allocation)
{
struct drm_device *dev = cstate->base.crtc->dev;
const struct drm_i915_private *dev_priv = to_i915(dev);
uint16_t trans_min, trans_y_tile_min;
const uint16_t trans_amount = 10; /* This is configurable amount */
uint16_t wm0_sel_res_b, trans_offset_b, res_blocks;
/* Transition WM are not recommended by HW team for GEN9 */
if (INTEL_GEN(dev_priv) <= 9)
return;
/* Transition WM don't make any sense if ipc is disabled */
if (!dev_priv->ipc_enabled)
return;
trans_min = 14;
if (INTEL_GEN(dev_priv) >= 11)
trans_min = 4;
trans_offset_b = trans_min + trans_amount;
/*
* The spec asks for Selected Result Blocks for wm0 (the real value),
* not Result Blocks (the integer value). Pay attention to the capital
* letters. The value wm_l0->plane_res_b is actually Result Blocks, but
* since Result Blocks is the ceiling of Selected Result Blocks plus 1,
* and since we later will have to get the ceiling of the sum in the
* transition watermarks calculation, we can just pretend Selected
* Result Blocks is Result Blocks minus 1 and it should work for the
* current platforms.
*/
wm0_sel_res_b = wm->wm[0].plane_res_b - 1;
if (wp->y_tiled) {
trans_y_tile_min = (uint16_t) mul_round_up_u32_fixed16(2,
wp->y_tile_minimum);
res_blocks = max(wm0_sel_res_b, trans_y_tile_min) +
trans_offset_b;
} else {
res_blocks = wm0_sel_res_b + trans_offset_b;
/* WA BUG:1938466 add one block for non y-tile planes */
if (IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_A0))
res_blocks += 1;
}
res_blocks += 1;
if (res_blocks < ddb_allocation) {
wm->trans_wm.plane_res_b = res_blocks;
wm->trans_wm.plane_en = true;
}
}
static int skl_build_plane_wm_single(struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state,
enum plane_id plane_id, int color_plane)
{
struct skl_plane_wm *wm = &crtc_state->wm.skl.optimal.planes[plane_id];
u16 ddb_blocks = skl_ddb_entry_size(&crtc_state->wm.skl.plane_ddb_y[plane_id]);
struct skl_wm_params wm_params;
int ret;
ret = skl_compute_plane_wm_params(crtc_state, plane_state,
&wm_params, color_plane);
if (ret)
return ret;
ret = skl_compute_wm_levels(crtc_state, plane_state,
ddb_blocks, &wm_params, wm->wm);
if (ret)
return ret;
skl_compute_transition_wm(crtc_state, &wm_params, wm, ddb_blocks);
return 0;
}
static int skl_build_plane_wm_uv(struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state,
enum plane_id plane_id)
{
struct skl_plane_wm *wm = &crtc_state->wm.skl.optimal.planes[plane_id];
u16 ddb_blocks = skl_ddb_entry_size(&crtc_state->wm.skl.plane_ddb_uv[plane_id]);
struct skl_wm_params wm_params;
int ret;
wm->is_planar = true;
/* uv plane watermarks must also be validated for NV12/Planar */
ret = skl_compute_plane_wm_params(crtc_state, plane_state,
&wm_params, 1);
if (ret)
return ret;
ret = skl_compute_wm_levels(crtc_state, plane_state,
ddb_blocks, &wm_params, wm->uv_wm);
if (ret)
return ret;
return 0;
}
static int skl_build_plane_wm(struct skl_pipe_wm *pipe_wm,
struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state)
{
struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
const struct drm_framebuffer *fb = plane_state->base.fb;
enum plane_id plane_id = plane->id;
int ret;
if (!intel_wm_plane_visible(crtc_state, plane_state))
return 0;
ret = skl_build_plane_wm_single(crtc_state, plane_state,
plane_id, 0);
if (ret)
return ret;
if (fb->format->is_yuv && fb->format->num_planes > 1) {
ret = skl_build_plane_wm_uv(crtc_state, plane_state,
plane_id);
if (ret)
return ret;
}
return 0;
}
static int icl_build_plane_wm(struct skl_pipe_wm *pipe_wm,
struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state)
{
enum plane_id plane_id = to_intel_plane(plane_state->base.plane)->id;
int ret;
/* Watermarks calculated in master */
if (plane_state->slave)
return 0;
if (plane_state->linked_plane) {
const struct drm_framebuffer *fb = plane_state->base.fb;
enum plane_id y_plane_id = plane_state->linked_plane->id;
WARN_ON(!intel_wm_plane_visible(crtc_state, plane_state));
WARN_ON(!fb->format->is_yuv ||
fb->format->num_planes == 1);
ret = skl_build_plane_wm_single(crtc_state, plane_state,
y_plane_id, 0);
if (ret)
return ret;
ret = skl_build_plane_wm_single(crtc_state, plane_state,
plane_id, 1);
if (ret)
return ret;
} else if (intel_wm_plane_visible(crtc_state, plane_state)) {
ret = skl_build_plane_wm_single(crtc_state, plane_state,
plane_id, 0);
if (ret)
return ret;
}
return 0;
}
static int skl_build_pipe_wm(struct intel_crtc_state *cstate,
struct skl_pipe_wm *pipe_wm)
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
{
struct drm_i915_private *dev_priv = to_i915(cstate->base.crtc->dev);
struct drm_crtc_state *crtc_state = &cstate->base;
struct drm_plane *plane;
const struct drm_plane_state *pstate;
int ret;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
/*
* We'll only calculate watermarks for planes that are actually
* enabled, so make sure all other planes are set as disabled.
*/
memset(pipe_wm->planes, 0, sizeof(pipe_wm->planes));
drm_atomic_crtc_state_for_each_plane_state(plane, pstate, crtc_state) {
const struct intel_plane_state *intel_pstate =
to_intel_plane_state(pstate);
if (INTEL_GEN(dev_priv) >= 11)
ret = icl_build_plane_wm(pipe_wm,
cstate, intel_pstate);
else
ret = skl_build_plane_wm(pipe_wm,
cstate, intel_pstate);
if (ret)
return ret;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
}
drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4) Just pull the info out of the state structures rather than staging it in an additional set of structures. To make this more straightforward, we change the signature of several internal WM functions to take the crtc state as a parameter. v2: - Don't forget to skip cursor planes on a loop in the DDB allocation function to match original behavior. (Ander) - Change a use of intel_crtc->active to cstate->active. They should be identical, but it's better to be consistent. (Ander) - Rework more function signatures to pass states rather than crtc for consistency. (Ander) v3: - Add missing "+ 1" to skl_wm_plane_id()'s 'overlay' case. (Maarten) - Packed formats should pass '0' to drm_format_plane_cpp(), not 1. (Maarten) - Drop unwanted WARN_ON() for disabled planes when calculating data rate for SKL. (Maarten) v4: - Don't include cursor plane in total relative data rate calculation; we've already handled the cursor allocation earlier. - Fix 'bytes_per_pixel' calculation braindamage. Somehow I hardcoded the NV12 format as a parameter rather than the actual fb->pixel_format, and even then still managed to get the format plane wrong. (Ville) - Use plane->state->fb rather than plane->fb in skl_allocate_pipe_ddb(); the plane->fb pointer isn't updated until after we've done our watermark recalculation, so it has stale values. (Bob Paauwe) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by(v3): Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Paauwe, Bob J <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> References: http://lists.freedesktop.org/archives/intel-gfx/2015-September/077060.html References: http://lists.freedesktop.org/archives/intel-gfx/2015-October/077721.html Smoke-tested-by(v4): Paulo Zanoni <paulo.r.zanoni@intel.com> (SKL) Link: http://patchwork.freedesktop.org/patch/61968/
2015-09-24 16:53:11 -06:00
pipe_wm->linetime = skl_compute_linetime_wm(cstate);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
return 0;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
}
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 06:33:26 -07:00
static void skl_ddb_entry_write(struct drm_i915_private *dev_priv,
i915_reg_t reg,
const struct skl_ddb_entry *entry)
{
if (entry->end)
I915_WRITE_FW(reg, (entry->end - 1) << 16 | entry->start);
else
I915_WRITE_FW(reg, 0);
}
static void skl_write_wm_level(struct drm_i915_private *dev_priv,
i915_reg_t reg,
const struct skl_wm_level *level)
{
uint32_t val = 0;
if (level->plane_en) {
val |= PLANE_WM_EN;
val |= level->plane_res_b;
val |= level->plane_res_l << PLANE_WM_LINES_SHIFT;
}
I915_WRITE_FW(reg, val);
}
void skl_write_plane_wm(struct intel_plane *plane,
const struct intel_crtc_state *crtc_state)
drm/i915/skl: Update plane watermarks atomically during plane updates Thanks to Ville for suggesting this as a potential solution to pipe underruns on Skylake. On Skylake all of the registers for configuring planes, including the registers for configuring their watermarks, are double buffered. New values written to them won't take effect until said registers are "armed", which is done by writing to the PLANE_SURF (or in the case of cursor planes, the CURBASE register) register. With this in mind, up until now we've been updating watermarks on skl like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } or modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } Now we update watermarks atomically like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() (wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() (actual wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } So this patch moves all of the watermark writes into the right place; inside of the vblank evasion where we update all of the registers for each plane. While this patch doesn't fix everything, it does allow us to update the watermark values in the way the hardware expects us to. Changes since original patch series: - Remove mutex_lock/mutex_unlock since they don't do anything and we're not touching global state - Move skl_write_cursor_wm/skl_write_plane_wm functions into intel_pm.c, make externally visible - Add skl_write_plane_wm calls to skl_update_plane - Fix conditional for for loop in skl_write_plane_wm (level < max_level should be level <= max_level) - Make diagram in commit more accurate to what's actually happening - Add Fixes: Changes since v1: - Use IS_GEN9() instead of IS_SKYLAKE() since these fixes apply to more then just Skylake - Update description to make it clear this patch doesn't fix everything - Check if pipes were actually changed before writing watermarks Changes since v2: - Write PIPE_WM_LINETIME during vblank evasion Changes since v3: - Rebase against new SAGV patch changes Changes since v4: - Add a parameter to choose what skl_wm_values struct to use when writing new plane watermarks Changes since v5: - Remove cursor ddb entry write in skl_write_cursor_wm(), defer until patch 6 - Write WM_LINETIME in intel_begin_crtc_commit() Changes since v6: - Remove redundant dirty_pipes check in skl_write_plane_wm (we check this in all places where we call this function, and it was supposed to have been removed earlier anyway) - In i9xx_update_cursor(), use dev_priv->info.gen >= 9 instead of IS_GEN9(dev_priv). We do this everywhere else and I'd imagine this needs to be done for gen10 as well Changes since v7: - Fix rebase fail (unused variable obj) - Make struct skl_wm_values *wm const - Fix indenting - Use INTEL_GEN() instead of dev_priv->info.gen Changes since v8: - Don't forget calls to skl_write_plane_wm() when disabling planes - Use INTEL_GEN(), not INTEL_INFO()->gen in intel_begin_crtc_commit() Fixes: 2d41c0b59afc ("drm/i915/skl: SKL Watermark Computation") Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com
2016-08-22 10:50:08 -06:00
{
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
int level, max_level = ilk_wm_max_level(dev_priv);
enum plane_id plane_id = plane->id;
enum pipe pipe = plane->pipe;
const struct skl_plane_wm *wm =
&crtc_state->wm.skl.optimal.planes[plane_id];
const struct skl_ddb_entry *ddb_y =
&crtc_state->wm.skl.plane_ddb_y[plane_id];
const struct skl_ddb_entry *ddb_uv =
&crtc_state->wm.skl.plane_ddb_uv[plane_id];
drm/i915/skl: Update plane watermarks atomically during plane updates Thanks to Ville for suggesting this as a potential solution to pipe underruns on Skylake. On Skylake all of the registers for configuring planes, including the registers for configuring their watermarks, are double buffered. New values written to them won't take effect until said registers are "armed", which is done by writing to the PLANE_SURF (or in the case of cursor planes, the CURBASE register) register. With this in mind, up until now we've been updating watermarks on skl like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } or modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } Now we update watermarks atomically like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() (wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() (actual wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } So this patch moves all of the watermark writes into the right place; inside of the vblank evasion where we update all of the registers for each plane. While this patch doesn't fix everything, it does allow us to update the watermark values in the way the hardware expects us to. Changes since original patch series: - Remove mutex_lock/mutex_unlock since they don't do anything and we're not touching global state - Move skl_write_cursor_wm/skl_write_plane_wm functions into intel_pm.c, make externally visible - Add skl_write_plane_wm calls to skl_update_plane - Fix conditional for for loop in skl_write_plane_wm (level < max_level should be level <= max_level) - Make diagram in commit more accurate to what's actually happening - Add Fixes: Changes since v1: - Use IS_GEN9() instead of IS_SKYLAKE() since these fixes apply to more then just Skylake - Update description to make it clear this patch doesn't fix everything - Check if pipes were actually changed before writing watermarks Changes since v2: - Write PIPE_WM_LINETIME during vblank evasion Changes since v3: - Rebase against new SAGV patch changes Changes since v4: - Add a parameter to choose what skl_wm_values struct to use when writing new plane watermarks Changes since v5: - Remove cursor ddb entry write in skl_write_cursor_wm(), defer until patch 6 - Write WM_LINETIME in intel_begin_crtc_commit() Changes since v6: - Remove redundant dirty_pipes check in skl_write_plane_wm (we check this in all places where we call this function, and it was supposed to have been removed earlier anyway) - In i9xx_update_cursor(), use dev_priv->info.gen >= 9 instead of IS_GEN9(dev_priv). We do this everywhere else and I'd imagine this needs to be done for gen10 as well Changes since v7: - Fix rebase fail (unused variable obj) - Make struct skl_wm_values *wm const - Fix indenting - Use INTEL_GEN() instead of dev_priv->info.gen Changes since v8: - Don't forget calls to skl_write_plane_wm() when disabling planes - Use INTEL_GEN(), not INTEL_INFO()->gen in intel_begin_crtc_commit() Fixes: 2d41c0b59afc ("drm/i915/skl: SKL Watermark Computation") Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com
2016-08-22 10:50:08 -06:00
for (level = 0; level <= max_level; level++) {
skl_write_wm_level(dev_priv, PLANE_WM(pipe, plane_id, level),
&wm->wm[level]);
drm/i915/skl: Update plane watermarks atomically during plane updates Thanks to Ville for suggesting this as a potential solution to pipe underruns on Skylake. On Skylake all of the registers for configuring planes, including the registers for configuring their watermarks, are double buffered. New values written to them won't take effect until said registers are "armed", which is done by writing to the PLANE_SURF (or in the case of cursor planes, the CURBASE register) register. With this in mind, up until now we've been updating watermarks on skl like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } or modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } Now we update watermarks atomically like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() (wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() (actual wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } So this patch moves all of the watermark writes into the right place; inside of the vblank evasion where we update all of the registers for each plane. While this patch doesn't fix everything, it does allow us to update the watermark values in the way the hardware expects us to. Changes since original patch series: - Remove mutex_lock/mutex_unlock since they don't do anything and we're not touching global state - Move skl_write_cursor_wm/skl_write_plane_wm functions into intel_pm.c, make externally visible - Add skl_write_plane_wm calls to skl_update_plane - Fix conditional for for loop in skl_write_plane_wm (level < max_level should be level <= max_level) - Make diagram in commit more accurate to what's actually happening - Add Fixes: Changes since v1: - Use IS_GEN9() instead of IS_SKYLAKE() since these fixes apply to more then just Skylake - Update description to make it clear this patch doesn't fix everything - Check if pipes were actually changed before writing watermarks Changes since v2: - Write PIPE_WM_LINETIME during vblank evasion Changes since v3: - Rebase against new SAGV patch changes Changes since v4: - Add a parameter to choose what skl_wm_values struct to use when writing new plane watermarks Changes since v5: - Remove cursor ddb entry write in skl_write_cursor_wm(), defer until patch 6 - Write WM_LINETIME in intel_begin_crtc_commit() Changes since v6: - Remove redundant dirty_pipes check in skl_write_plane_wm (we check this in all places where we call this function, and it was supposed to have been removed earlier anyway) - In i9xx_update_cursor(), use dev_priv->info.gen >= 9 instead of IS_GEN9(dev_priv). We do this everywhere else and I'd imagine this needs to be done for gen10 as well Changes since v7: - Fix rebase fail (unused variable obj) - Make struct skl_wm_values *wm const - Fix indenting - Use INTEL_GEN() instead of dev_priv->info.gen Changes since v8: - Don't forget calls to skl_write_plane_wm() when disabling planes - Use INTEL_GEN(), not INTEL_INFO()->gen in intel_begin_crtc_commit() Fixes: 2d41c0b59afc ("drm/i915/skl: SKL Watermark Computation") Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com
2016-08-22 10:50:08 -06:00
}
skl_write_wm_level(dev_priv, PLANE_WM_TRANS(pipe, plane_id),
&wm->trans_wm);
drm/i915/skl: Update DDB values atomically with wms/plane attrs Now that we can hook into update_crtcs and control the order in which we update CRTCs at each modeset, we can finish the final step of fixing Skylake's watermark handling by performing DDB updates at the same time as plane updates and watermark updates. The first major change in this patch is skl_update_crtcs(), which handles ensuring that we order each CRTC update in our atomic commits properly so that they honor the DDB flush order. The second major change in this patch is the order in which we flush the pipes. While the previous order may have worked, it can't be used in this approach since it no longer will do the right thing. For example, using the old ddb flush order: We have pipes A, B, and C enabled, and we're disabling C. Initial ddb allocation looks like this: | A | B |xxxxxxx| Since we're performing the ddb updates after performing any CRTC disablements in intel_atomic_commit_tail(), the space to the right of pipe B is unallocated. 1. Flush pipes with new allocation contained into old space. None apply, so we skip this 2. Flush pipes having their allocation reduced, but overlapping with a previous allocation. None apply, so we also skip this 3. Flush pipes that got more space allocated. This applies to A and B, giving us the following update order: A, B This is wrong, since updating pipe A first will cause it to overlap with B and potentially burst into flames. Our new order (see the code comments for details) would update the pipes in the proper order: B, A. As well, we calculate the order for each DDB update during the check phase, and reference it later in the commit phase when we hit skl_update_crtcs(). This long overdue patch fixes the rest of the underruns on Skylake. Changes since v1: - Add skl_ddb_entry_write() for cursor into skl_write_cursor_wm() Changes since v2: - Use the method for updating CRTCs that Ville suggested - In skl_update_wm(), only copy the watermarks for the crtc that was passed to us Changes since v3: - Small comment fix in skl_ddb_allocation_overlaps() Changes since v4: - Remove the second loop in intel_update_crtcs() and use Ville's suggestion for updating the ddb allocations in the right order - Get rid of the second loop and just use the ddb state as it updates to determine what order to update everything in (thanks for the suggestion Ville) - Simplify skl_ddb_allocation_overlaps() - Split actual overlap checking into it's own helper Fixes: 0e8fb7ba7ca5 ("drm/i915/skl: Flush the WM configuration") Fixes: 8211bd5bdf5e ("drm/i915/skl: Program the DDB allocation") [omitting CC for stable, since this patch will need to be changed for such backports first] Testcase: kms_cursor_legacy Testcase: plane-all-modeset-transition Signed-off-by: Lyude <cpaul@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471961565-28540-2-git-send-email-cpaul@redhat.com
2016-08-23 23:48:10 -06:00
if (INTEL_GEN(dev_priv) >= 11) {
skl_ddb_entry_write(dev_priv,
PLANE_BUF_CFG(pipe, plane_id), ddb_y);
return;
}
if (wm->is_planar)
swap(ddb_y, ddb_uv);
skl_ddb_entry_write(dev_priv,
PLANE_BUF_CFG(pipe, plane_id), ddb_y);
skl_ddb_entry_write(dev_priv,
PLANE_NV12_BUF_CFG(pipe, plane_id), ddb_uv);
drm/i915/skl: Update plane watermarks atomically during plane updates Thanks to Ville for suggesting this as a potential solution to pipe underruns on Skylake. On Skylake all of the registers for configuring planes, including the registers for configuring their watermarks, are double buffered. New values written to them won't take effect until said registers are "armed", which is done by writing to the PLANE_SURF (or in the case of cursor planes, the CURBASE register) register. With this in mind, up until now we've been updating watermarks on skl like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } or modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } Now we update watermarks atomically like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() (wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() (actual wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } So this patch moves all of the watermark writes into the right place; inside of the vblank evasion where we update all of the registers for each plane. While this patch doesn't fix everything, it does allow us to update the watermark values in the way the hardware expects us to. Changes since original patch series: - Remove mutex_lock/mutex_unlock since they don't do anything and we're not touching global state - Move skl_write_cursor_wm/skl_write_plane_wm functions into intel_pm.c, make externally visible - Add skl_write_plane_wm calls to skl_update_plane - Fix conditional for for loop in skl_write_plane_wm (level < max_level should be level <= max_level) - Make diagram in commit more accurate to what's actually happening - Add Fixes: Changes since v1: - Use IS_GEN9() instead of IS_SKYLAKE() since these fixes apply to more then just Skylake - Update description to make it clear this patch doesn't fix everything - Check if pipes were actually changed before writing watermarks Changes since v2: - Write PIPE_WM_LINETIME during vblank evasion Changes since v3: - Rebase against new SAGV patch changes Changes since v4: - Add a parameter to choose what skl_wm_values struct to use when writing new plane watermarks Changes since v5: - Remove cursor ddb entry write in skl_write_cursor_wm(), defer until patch 6 - Write WM_LINETIME in intel_begin_crtc_commit() Changes since v6: - Remove redundant dirty_pipes check in skl_write_plane_wm (we check this in all places where we call this function, and it was supposed to have been removed earlier anyway) - In i9xx_update_cursor(), use dev_priv->info.gen >= 9 instead of IS_GEN9(dev_priv). We do this everywhere else and I'd imagine this needs to be done for gen10 as well Changes since v7: - Fix rebase fail (unused variable obj) - Make struct skl_wm_values *wm const - Fix indenting - Use INTEL_GEN() instead of dev_priv->info.gen Changes since v8: - Don't forget calls to skl_write_plane_wm() when disabling planes - Use INTEL_GEN(), not INTEL_INFO()->gen in intel_begin_crtc_commit() Fixes: 2d41c0b59afc ("drm/i915/skl: SKL Watermark Computation") Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com
2016-08-22 10:50:08 -06:00
}
void skl_write_cursor_wm(struct intel_plane *plane,
const struct intel_crtc_state *crtc_state)
drm/i915/skl: Update plane watermarks atomically during plane updates Thanks to Ville for suggesting this as a potential solution to pipe underruns on Skylake. On Skylake all of the registers for configuring planes, including the registers for configuring their watermarks, are double buffered. New values written to them won't take effect until said registers are "armed", which is done by writing to the PLANE_SURF (or in the case of cursor planes, the CURBASE register) register. With this in mind, up until now we've been updating watermarks on skl like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } or modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } Now we update watermarks atomically like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() (wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() (actual wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } So this patch moves all of the watermark writes into the right place; inside of the vblank evasion where we update all of the registers for each plane. While this patch doesn't fix everything, it does allow us to update the watermark values in the way the hardware expects us to. Changes since original patch series: - Remove mutex_lock/mutex_unlock since they don't do anything and we're not touching global state - Move skl_write_cursor_wm/skl_write_plane_wm functions into intel_pm.c, make externally visible - Add skl_write_plane_wm calls to skl_update_plane - Fix conditional for for loop in skl_write_plane_wm (level < max_level should be level <= max_level) - Make diagram in commit more accurate to what's actually happening - Add Fixes: Changes since v1: - Use IS_GEN9() instead of IS_SKYLAKE() since these fixes apply to more then just Skylake - Update description to make it clear this patch doesn't fix everything - Check if pipes were actually changed before writing watermarks Changes since v2: - Write PIPE_WM_LINETIME during vblank evasion Changes since v3: - Rebase against new SAGV patch changes Changes since v4: - Add a parameter to choose what skl_wm_values struct to use when writing new plane watermarks Changes since v5: - Remove cursor ddb entry write in skl_write_cursor_wm(), defer until patch 6 - Write WM_LINETIME in intel_begin_crtc_commit() Changes since v6: - Remove redundant dirty_pipes check in skl_write_plane_wm (we check this in all places where we call this function, and it was supposed to have been removed earlier anyway) - In i9xx_update_cursor(), use dev_priv->info.gen >= 9 instead of IS_GEN9(dev_priv). We do this everywhere else and I'd imagine this needs to be done for gen10 as well Changes since v7: - Fix rebase fail (unused variable obj) - Make struct skl_wm_values *wm const - Fix indenting - Use INTEL_GEN() instead of dev_priv->info.gen Changes since v8: - Don't forget calls to skl_write_plane_wm() when disabling planes - Use INTEL_GEN(), not INTEL_INFO()->gen in intel_begin_crtc_commit() Fixes: 2d41c0b59afc ("drm/i915/skl: SKL Watermark Computation") Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com
2016-08-22 10:50:08 -06:00
{
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
int level, max_level = ilk_wm_max_level(dev_priv);
enum plane_id plane_id = plane->id;
enum pipe pipe = plane->pipe;
const struct skl_plane_wm *wm =
&crtc_state->wm.skl.optimal.planes[plane_id];
const struct skl_ddb_entry *ddb =
&crtc_state->wm.skl.plane_ddb_y[plane_id];
drm/i915/skl: Update plane watermarks atomically during plane updates Thanks to Ville for suggesting this as a potential solution to pipe underruns on Skylake. On Skylake all of the registers for configuring planes, including the registers for configuring their watermarks, are double buffered. New values written to them won't take effect until said registers are "armed", which is done by writing to the PLANE_SURF (or in the case of cursor planes, the CURBASE register) register. With this in mind, up until now we've been updating watermarks on skl like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } or modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } Now we update watermarks atomically like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() (wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() (actual wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } So this patch moves all of the watermark writes into the right place; inside of the vblank evasion where we update all of the registers for each plane. While this patch doesn't fix everything, it does allow us to update the watermark values in the way the hardware expects us to. Changes since original patch series: - Remove mutex_lock/mutex_unlock since they don't do anything and we're not touching global state - Move skl_write_cursor_wm/skl_write_plane_wm functions into intel_pm.c, make externally visible - Add skl_write_plane_wm calls to skl_update_plane - Fix conditional for for loop in skl_write_plane_wm (level < max_level should be level <= max_level) - Make diagram in commit more accurate to what's actually happening - Add Fixes: Changes since v1: - Use IS_GEN9() instead of IS_SKYLAKE() since these fixes apply to more then just Skylake - Update description to make it clear this patch doesn't fix everything - Check if pipes were actually changed before writing watermarks Changes since v2: - Write PIPE_WM_LINETIME during vblank evasion Changes since v3: - Rebase against new SAGV patch changes Changes since v4: - Add a parameter to choose what skl_wm_values struct to use when writing new plane watermarks Changes since v5: - Remove cursor ddb entry write in skl_write_cursor_wm(), defer until patch 6 - Write WM_LINETIME in intel_begin_crtc_commit() Changes since v6: - Remove redundant dirty_pipes check in skl_write_plane_wm (we check this in all places where we call this function, and it was supposed to have been removed earlier anyway) - In i9xx_update_cursor(), use dev_priv->info.gen >= 9 instead of IS_GEN9(dev_priv). We do this everywhere else and I'd imagine this needs to be done for gen10 as well Changes since v7: - Fix rebase fail (unused variable obj) - Make struct skl_wm_values *wm const - Fix indenting - Use INTEL_GEN() instead of dev_priv->info.gen Changes since v8: - Don't forget calls to skl_write_plane_wm() when disabling planes - Use INTEL_GEN(), not INTEL_INFO()->gen in intel_begin_crtc_commit() Fixes: 2d41c0b59afc ("drm/i915/skl: SKL Watermark Computation") Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com
2016-08-22 10:50:08 -06:00
for (level = 0; level <= max_level; level++) {
skl_write_wm_level(dev_priv, CUR_WM(pipe, level),
&wm->wm[level]);
drm/i915/skl: Update plane watermarks atomically during plane updates Thanks to Ville for suggesting this as a potential solution to pipe underruns on Skylake. On Skylake all of the registers for configuring planes, including the registers for configuring their watermarks, are double buffered. New values written to them won't take effect until said registers are "armed", which is done by writing to the PLANE_SURF (or in the case of cursor planes, the CURBASE register) register. With this in mind, up until now we've been updating watermarks on skl like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } or modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() - {vblank happens; new watermarks + old plane values => underrun } - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - end vblank evasion } Now we update watermarks atomically like this: non-modeset { - calculate (during atomic check phase) - finish_atomic_commit: - intel_pre_plane_update: - intel_update_watermarks() (wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } modeset { - calculate (during atomic check phase) - finish_atomic_commit: - crtc_enable: - intel_update_watermarks() (actual wm values aren't written yet) - drm_atomic_helper_commit_planes_on_crtc: - start vblank evasion - write new plane registers - write new wm values - end vblank evasion } So this patch moves all of the watermark writes into the right place; inside of the vblank evasion where we update all of the registers for each plane. While this patch doesn't fix everything, it does allow us to update the watermark values in the way the hardware expects us to. Changes since original patch series: - Remove mutex_lock/mutex_unlock since they don't do anything and we're not touching global state - Move skl_write_cursor_wm/skl_write_plane_wm functions into intel_pm.c, make externally visible - Add skl_write_plane_wm calls to skl_update_plane - Fix conditional for for loop in skl_write_plane_wm (level < max_level should be level <= max_level) - Make diagram in commit more accurate to what's actually happening - Add Fixes: Changes since v1: - Use IS_GEN9() instead of IS_SKYLAKE() since these fixes apply to more then just Skylake - Update description to make it clear this patch doesn't fix everything - Check if pipes were actually changed before writing watermarks Changes since v2: - Write PIPE_WM_LINETIME during vblank evasion Changes since v3: - Rebase against new SAGV patch changes Changes since v4: - Add a parameter to choose what skl_wm_values struct to use when writing new plane watermarks Changes since v5: - Remove cursor ddb entry write in skl_write_cursor_wm(), defer until patch 6 - Write WM_LINETIME in intel_begin_crtc_commit() Changes since v6: - Remove redundant dirty_pipes check in skl_write_plane_wm (we check this in all places where we call this function, and it was supposed to have been removed earlier anyway) - In i9xx_update_cursor(), use dev_priv->info.gen >= 9 instead of IS_GEN9(dev_priv). We do this everywhere else and I'd imagine this needs to be done for gen10 as well Changes since v7: - Fix rebase fail (unused variable obj) - Make struct skl_wm_values *wm const - Fix indenting - Use INTEL_GEN() instead of dev_priv->info.gen Changes since v8: - Don't forget calls to skl_write_plane_wm() when disabling planes - Use INTEL_GEN(), not INTEL_INFO()->gen in intel_begin_crtc_commit() Fixes: 2d41c0b59afc ("drm/i915/skl: SKL Watermark Computation") Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com Link: http://patchwork.freedesktop.org/patch/msgid/1471884608-10671-1-git-send-email-cpaul@redhat.com
2016-08-22 10:50:08 -06:00
}
skl_write_wm_level(dev_priv, CUR_WM_TRANS(pipe), &wm->trans_wm);
skl_ddb_entry_write(dev_priv, CUR_BUF_CFG(pipe), ddb);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
}
bool skl_wm_level_equals(const struct skl_wm_level *l1,
const struct skl_wm_level *l2)
{
return l1->plane_en == l2->plane_en &&
l1->plane_res_l == l2->plane_res_l &&
l1->plane_res_b == l2->plane_res_b;
}
static bool skl_plane_wm_equals(struct drm_i915_private *dev_priv,
const struct skl_plane_wm *wm1,
const struct skl_plane_wm *wm2)
{
int level, max_level = ilk_wm_max_level(dev_priv);
for (level = 0; level <= max_level; level++) {
if (!skl_wm_level_equals(&wm1->wm[level], &wm2->wm[level]) ||
!skl_wm_level_equals(&wm1->uv_wm[level], &wm2->uv_wm[level]))
return false;
}
return skl_wm_level_equals(&wm1->trans_wm, &wm2->trans_wm);
}
drm/i915/skl: Update DDB values atomically with wms/plane attrs Now that we can hook into update_crtcs and control the order in which we update CRTCs at each modeset, we can finish the final step of fixing Skylake's watermark handling by performing DDB updates at the same time as plane updates and watermark updates. The first major change in this patch is skl_update_crtcs(), which handles ensuring that we order each CRTC update in our atomic commits properly so that they honor the DDB flush order. The second major change in this patch is the order in which we flush the pipes. While the previous order may have worked, it can't be used in this approach since it no longer will do the right thing. For example, using the old ddb flush order: We have pipes A, B, and C enabled, and we're disabling C. Initial ddb allocation looks like this: | A | B |xxxxxxx| Since we're performing the ddb updates after performing any CRTC disablements in intel_atomic_commit_tail(), the space to the right of pipe B is unallocated. 1. Flush pipes with new allocation contained into old space. None apply, so we skip this 2. Flush pipes having their allocation reduced, but overlapping with a previous allocation. None apply, so we also skip this 3. Flush pipes that got more space allocated. This applies to A and B, giving us the following update order: A, B This is wrong, since updating pipe A first will cause it to overlap with B and potentially burst into flames. Our new order (see the code comments for details) would update the pipes in the proper order: B, A. As well, we calculate the order for each DDB update during the check phase, and reference it later in the commit phase when we hit skl_update_crtcs(). This long overdue patch fixes the rest of the underruns on Skylake. Changes since v1: - Add skl_ddb_entry_write() for cursor into skl_write_cursor_wm() Changes since v2: - Use the method for updating CRTCs that Ville suggested - In skl_update_wm(), only copy the watermarks for the crtc that was passed to us Changes since v3: - Small comment fix in skl_ddb_allocation_overlaps() Changes since v4: - Remove the second loop in intel_update_crtcs() and use Ville's suggestion for updating the ddb allocations in the right order - Get rid of the second loop and just use the ddb state as it updates to determine what order to update everything in (thanks for the suggestion Ville) - Simplify skl_ddb_allocation_overlaps() - Split actual overlap checking into it's own helper Fixes: 0e8fb7ba7ca5 ("drm/i915/skl: Flush the WM configuration") Fixes: 8211bd5bdf5e ("drm/i915/skl: Program the DDB allocation") [omitting CC for stable, since this patch will need to be changed for such backports first] Testcase: kms_cursor_legacy Testcase: plane-all-modeset-transition Signed-off-by: Lyude <cpaul@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471961565-28540-2-git-send-email-cpaul@redhat.com
2016-08-23 23:48:10 -06:00
static inline bool skl_ddb_entries_overlap(const struct skl_ddb_entry *a,
const struct skl_ddb_entry *b)
{
drm/i915/skl: Update DDB values atomically with wms/plane attrs Now that we can hook into update_crtcs and control the order in which we update CRTCs at each modeset, we can finish the final step of fixing Skylake's watermark handling by performing DDB updates at the same time as plane updates and watermark updates. The first major change in this patch is skl_update_crtcs(), which handles ensuring that we order each CRTC update in our atomic commits properly so that they honor the DDB flush order. The second major change in this patch is the order in which we flush the pipes. While the previous order may have worked, it can't be used in this approach since it no longer will do the right thing. For example, using the old ddb flush order: We have pipes A, B, and C enabled, and we're disabling C. Initial ddb allocation looks like this: | A | B |xxxxxxx| Since we're performing the ddb updates after performing any CRTC disablements in intel_atomic_commit_tail(), the space to the right of pipe B is unallocated. 1. Flush pipes with new allocation contained into old space. None apply, so we skip this 2. Flush pipes having their allocation reduced, but overlapping with a previous allocation. None apply, so we also skip this 3. Flush pipes that got more space allocated. This applies to A and B, giving us the following update order: A, B This is wrong, since updating pipe A first will cause it to overlap with B and potentially burst into flames. Our new order (see the code comments for details) would update the pipes in the proper order: B, A. As well, we calculate the order for each DDB update during the check phase, and reference it later in the commit phase when we hit skl_update_crtcs(). This long overdue patch fixes the rest of the underruns on Skylake. Changes since v1: - Add skl_ddb_entry_write() for cursor into skl_write_cursor_wm() Changes since v2: - Use the method for updating CRTCs that Ville suggested - In skl_update_wm(), only copy the watermarks for the crtc that was passed to us Changes since v3: - Small comment fix in skl_ddb_allocation_overlaps() Changes since v4: - Remove the second loop in intel_update_crtcs() and use Ville's suggestion for updating the ddb allocations in the right order - Get rid of the second loop and just use the ddb state as it updates to determine what order to update everything in (thanks for the suggestion Ville) - Simplify skl_ddb_allocation_overlaps() - Split actual overlap checking into it's own helper Fixes: 0e8fb7ba7ca5 ("drm/i915/skl: Flush the WM configuration") Fixes: 8211bd5bdf5e ("drm/i915/skl: Program the DDB allocation") [omitting CC for stable, since this patch will need to be changed for such backports first] Testcase: kms_cursor_legacy Testcase: plane-all-modeset-transition Signed-off-by: Lyude <cpaul@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471961565-28540-2-git-send-email-cpaul@redhat.com
2016-08-23 23:48:10 -06:00
return a->start < b->end && b->start < a->end;
}
bool skl_ddb_allocation_overlaps(const struct skl_ddb_entry *ddb,
const struct skl_ddb_entry entries[],
int num_entries, int ignore_idx)
{
int i;
for (i = 0; i < num_entries; i++) {
if (i != ignore_idx &&
skl_ddb_entries_overlap(ddb, &entries[i]))
drm/i915/skl: Update DDB values atomically with wms/plane attrs Now that we can hook into update_crtcs and control the order in which we update CRTCs at each modeset, we can finish the final step of fixing Skylake's watermark handling by performing DDB updates at the same time as plane updates and watermark updates. The first major change in this patch is skl_update_crtcs(), which handles ensuring that we order each CRTC update in our atomic commits properly so that they honor the DDB flush order. The second major change in this patch is the order in which we flush the pipes. While the previous order may have worked, it can't be used in this approach since it no longer will do the right thing. For example, using the old ddb flush order: We have pipes A, B, and C enabled, and we're disabling C. Initial ddb allocation looks like this: | A | B |xxxxxxx| Since we're performing the ddb updates after performing any CRTC disablements in intel_atomic_commit_tail(), the space to the right of pipe B is unallocated. 1. Flush pipes with new allocation contained into old space. None apply, so we skip this 2. Flush pipes having their allocation reduced, but overlapping with a previous allocation. None apply, so we also skip this 3. Flush pipes that got more space allocated. This applies to A and B, giving us the following update order: A, B This is wrong, since updating pipe A first will cause it to overlap with B and potentially burst into flames. Our new order (see the code comments for details) would update the pipes in the proper order: B, A. As well, we calculate the order for each DDB update during the check phase, and reference it later in the commit phase when we hit skl_update_crtcs(). This long overdue patch fixes the rest of the underruns on Skylake. Changes since v1: - Add skl_ddb_entry_write() for cursor into skl_write_cursor_wm() Changes since v2: - Use the method for updating CRTCs that Ville suggested - In skl_update_wm(), only copy the watermarks for the crtc that was passed to us Changes since v3: - Small comment fix in skl_ddb_allocation_overlaps() Changes since v4: - Remove the second loop in intel_update_crtcs() and use Ville's suggestion for updating the ddb allocations in the right order - Get rid of the second loop and just use the ddb state as it updates to determine what order to update everything in (thanks for the suggestion Ville) - Simplify skl_ddb_allocation_overlaps() - Split actual overlap checking into it's own helper Fixes: 0e8fb7ba7ca5 ("drm/i915/skl: Flush the WM configuration") Fixes: 8211bd5bdf5e ("drm/i915/skl: Program the DDB allocation") [omitting CC for stable, since this patch will need to be changed for such backports first] Testcase: kms_cursor_legacy Testcase: plane-all-modeset-transition Signed-off-by: Lyude <cpaul@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471961565-28540-2-git-send-email-cpaul@redhat.com
2016-08-23 23:48:10 -06:00
return true;
}
drm/i915/skl: Update DDB values atomically with wms/plane attrs Now that we can hook into update_crtcs and control the order in which we update CRTCs at each modeset, we can finish the final step of fixing Skylake's watermark handling by performing DDB updates at the same time as plane updates and watermark updates. The first major change in this patch is skl_update_crtcs(), which handles ensuring that we order each CRTC update in our atomic commits properly so that they honor the DDB flush order. The second major change in this patch is the order in which we flush the pipes. While the previous order may have worked, it can't be used in this approach since it no longer will do the right thing. For example, using the old ddb flush order: We have pipes A, B, and C enabled, and we're disabling C. Initial ddb allocation looks like this: | A | B |xxxxxxx| Since we're performing the ddb updates after performing any CRTC disablements in intel_atomic_commit_tail(), the space to the right of pipe B is unallocated. 1. Flush pipes with new allocation contained into old space. None apply, so we skip this 2. Flush pipes having their allocation reduced, but overlapping with a previous allocation. None apply, so we also skip this 3. Flush pipes that got more space allocated. This applies to A and B, giving us the following update order: A, B This is wrong, since updating pipe A first will cause it to overlap with B and potentially burst into flames. Our new order (see the code comments for details) would update the pipes in the proper order: B, A. As well, we calculate the order for each DDB update during the check phase, and reference it later in the commit phase when we hit skl_update_crtcs(). This long overdue patch fixes the rest of the underruns on Skylake. Changes since v1: - Add skl_ddb_entry_write() for cursor into skl_write_cursor_wm() Changes since v2: - Use the method for updating CRTCs that Ville suggested - In skl_update_wm(), only copy the watermarks for the crtc that was passed to us Changes since v3: - Small comment fix in skl_ddb_allocation_overlaps() Changes since v4: - Remove the second loop in intel_update_crtcs() and use Ville's suggestion for updating the ddb allocations in the right order - Get rid of the second loop and just use the ddb state as it updates to determine what order to update everything in (thanks for the suggestion Ville) - Simplify skl_ddb_allocation_overlaps() - Split actual overlap checking into it's own helper Fixes: 0e8fb7ba7ca5 ("drm/i915/skl: Flush the WM configuration") Fixes: 8211bd5bdf5e ("drm/i915/skl: Program the DDB allocation") [omitting CC for stable, since this patch will need to be changed for such backports first] Testcase: kms_cursor_legacy Testcase: plane-all-modeset-transition Signed-off-by: Lyude <cpaul@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471961565-28540-2-git-send-email-cpaul@redhat.com
2016-08-23 23:48:10 -06:00
return false;
}
static int skl_update_pipe_wm(struct drm_crtc_state *cstate,
const struct skl_pipe_wm *old_pipe_wm,
struct skl_pipe_wm *pipe_wm, /* out */
bool *changed /* out */)
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
{
struct intel_crtc_state *intel_cstate = to_intel_crtc_state(cstate);
int ret;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
ret = skl_build_pipe_wm(intel_cstate, pipe_wm);
if (ret)
return ret;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
if (!memcmp(old_pipe_wm, pipe_wm, sizeof(*pipe_wm)))
*changed = false;
else
*changed = true;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
return 0;
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
}
static uint32_t
pipes_modified(struct drm_atomic_state *state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *cstate;
uint32_t i, ret = 0;
for_each_new_crtc_in_state(state, crtc, cstate, i)
ret |= drm_crtc_mask(crtc);
return ret;
}
static int
skl_ddb_add_affected_planes(const struct intel_crtc_state *old_crtc_state,
struct intel_crtc_state *new_crtc_state)
{
struct intel_atomic_state *state = to_intel_atomic_state(new_crtc_state->base.state);
struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
struct intel_plane *plane;
for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
struct intel_plane_state *plane_state;
enum plane_id plane_id = plane->id;
if (skl_ddb_entry_equal(&old_crtc_state->wm.skl.plane_ddb_y[plane_id],
&new_crtc_state->wm.skl.plane_ddb_y[plane_id]) &&
skl_ddb_entry_equal(&old_crtc_state->wm.skl.plane_ddb_uv[plane_id],
&new_crtc_state->wm.skl.plane_ddb_uv[plane_id]))
continue;
plane_state = intel_atomic_get_plane_state(state, plane);
if (IS_ERR(plane_state))
return PTR_ERR(plane_state);
drm/i915/gen11: Link nv12 Y and UV planes in the atomic state, v5. To make NV12 working on icl, we need to update 2 planes simultaneously. I've chosen to do this in the CRTC step after plane validation is done, so we know what planes are (in)visible. The linked Y plane will get updated in intel_plane_update_planes_on_crtc(), by the call to update_slave, which gets the master's plane_state as argument. The link requires both planes for atomic_update to work, so make sure skl_ddb_add_affected_planes() adds both states. Changes since v1: - Introduce icl_is_nv12_y_plane(), instead of hardcoding sprite numbers. - Put all the state updating login in intel_plane_atomic_check_with_state(). - Clean up changes in intel_plane_atomic_check(). Changes since v2: - Fix intel_atomic_get_old_plane_state() to actually return old state. - Move visibility changes to preparation patch. - Only try to find a Y plane on gen11, earlier platforms only require a single plane. Changes since v3: - Fix checkpatch warning about to_intel_crtc() usage. - Add affected planes from icl_add_linked_planes() before check_planes(), it's a cleaner way to do this. (Ville) Changes since v4: - Clear plane links in icl_check_nv12_planes() for clarity. - Only pass crtc_state to icl_check_nv12_planes(). - Use for_each_new_intel_plane_in_state() in icl_check_nv12_planes. - Rename aux to linked. (Ville) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181022135152.15324-1-maarten.lankhorst@linux.intel.com [mlankhorst: Change bool slave to u32, to satisfy checkpatch] [mlankhorst: Add WARN_ON's based on Ville's suggestion]
2018-10-22 07:51:52 -06:00
new_crtc_state->update_planes |= BIT(plane_id);
}
return 0;
}
static int
skl_compute_ddb(struct drm_atomic_state *state)
drm/i915/gen9: Compute DDB allocation at atomic check time (v4) Calculate the DDB blocks needed to satisfy the current atomic transaction at atomic check time. This is a prerequisite to calculating SKL watermarks during the 'check' phase and rejecting any configurations that we can't find valid watermarks for. Due to the nature of DDB allocation, it's possible for the addition of a new CRTC to make the watermark configuration already in use on another, unchanged CRTC become invalid. A change in which CRTC's are active triggers a recompute of the entire DDB, which unfortunately means we need to disallow any other atomic commits from racing with such an update. If the active CRTC's change, we need to grab the lock on all CRTC's and run all CRTC's through their 'check' handler to recompute and re-check their per-CRTC DDB allocations. Note that with this patch we only compute the DDB allocation but we don't actually use the computed values during watermark programming yet. For ease of review/testing/bisecting, we still recompute the DDB at watermark programming time and just WARN() if it doesn't match the precomputed values. A future patch will switch over to using the precomputed values once we're sure they're being properly computed. Another clarifying note: DDB allocation itself shouldn't ever fail with the algorithm we use today (i.e., we have enough DDB blocks on BXT to support the minimum needs of the worst-case scenario of every pipe/plane enabled at full size). However the watermarks calculations based on the DDB may fail and we'll be moving those to the atomic check as well in future patches. v2: - Skip DDB calculations in the rare case where our transaction doesn't actually touch any CRTC's at all. Assuming at least one CRTC state is present in our transaction, then it means we can't race with any transactions that would update dev_priv->active_crtcs (which requires _all_ CRTC locks). v3: - Also calculate DDB during initial hw readout, to prevent using incorrect bios values. (Maarten) v4: - Use new distrust_bios_wm flag instead of skip_initial_wm (which was never actually set). - Set intel_state->active_pipe_changes instead of just realloc_pipes Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lyude Paul <cpaul@redhat.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463061971-19638-10-git-send-email-matthew.d.roper@intel.com
2016-05-12 08:06:03 -06:00
{
const struct drm_i915_private *dev_priv = to_i915(state->dev);
drm/i915/gen9: Compute DDB allocation at atomic check time (v4) Calculate the DDB blocks needed to satisfy the current atomic transaction at atomic check time. This is a prerequisite to calculating SKL watermarks during the 'check' phase and rejecting any configurations that we can't find valid watermarks for. Due to the nature of DDB allocation, it's possible for the addition of a new CRTC to make the watermark configuration already in use on another, unchanged CRTC become invalid. A change in which CRTC's are active triggers a recompute of the entire DDB, which unfortunately means we need to disallow any other atomic commits from racing with such an update. If the active CRTC's change, we need to grab the lock on all CRTC's and run all CRTC's through their 'check' handler to recompute and re-check their per-CRTC DDB allocations. Note that with this patch we only compute the DDB allocation but we don't actually use the computed values during watermark programming yet. For ease of review/testing/bisecting, we still recompute the DDB at watermark programming time and just WARN() if it doesn't match the precomputed values. A future patch will switch over to using the precomputed values once we're sure they're being properly computed. Another clarifying note: DDB allocation itself shouldn't ever fail with the algorithm we use today (i.e., we have enough DDB blocks on BXT to support the minimum needs of the worst-case scenario of every pipe/plane enabled at full size). However the watermarks calculations based on the DDB may fail and we'll be moving those to the atomic check as well in future patches. v2: - Skip DDB calculations in the rare case where our transaction doesn't actually touch any CRTC's at all. Assuming at least one CRTC state is present in our transaction, then it means we can't race with any transactions that would update dev_priv->active_crtcs (which requires _all_ CRTC locks). v3: - Also calculate DDB during initial hw readout, to prevent using incorrect bios values. (Maarten) v4: - Use new distrust_bios_wm flag instead of skip_initial_wm (which was never actually set). - Set intel_state->active_pipe_changes instead of just realloc_pipes Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lyude Paul <cpaul@redhat.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463061971-19638-10-git-send-email-matthew.d.roper@intel.com
2016-05-12 08:06:03 -06:00
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
drm/i915/gen9: Calculate watermarks during atomic 'check' (v2) Moving watermark calculation into the check phase will allow us to to reject display configurations for which there are no valid watermark values before we start trying to program the hardware (although those tests will come in a subsequent patch). Another advantage of moving this calculation to the check phase is that we can calculate the watermarks in a single shot as part of the atomic transaction. The watermark interfaces we inherited from our legacy modesetting days are a bit broken in the atomic design because they use per-crtc entry points but actually re-calculate and re-program something that is really more of a global state. That worked okay in the legacy modesetting world because operations only ever updated a single CRTC at a time. However in the atomic world, a transaction can involve multiple CRTC's, which means we wind up computing and programming the watermarks NxN times (where N is the number of CRTC's involved). With this patch we eliminate the redundant re-calculation of watermark data for atomic states (which was the cause of the WARN_ON(!wm_changed) problems that have plagued us for a while). We still need to work on the 'commit' side of watermark handling so that we aren't doing redundant NxN programming of watermarks, but that's content for future patches. v2: - Bail out of skl_write_wm_values() if the CRTC isn't active. Now that we set dirty_pipes to ~0 if the active pipes change (because we need to deal with DDB changes), we can now wind up here for disabled pipes, whereas we couldn't before. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89055 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92181 Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Tested-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463091100-13747-1-git-send-email-matthew.d.roper@intel.com
2016-05-12 16:11:40 -06:00
struct skl_ddb_allocation *ddb = &intel_state->wm_results.ddb;
struct intel_crtc_state *old_crtc_state;
struct intel_crtc_state *new_crtc_state;
struct intel_crtc *crtc;
int ret, i;
drm/i915/gen9: Compute DDB allocation at atomic check time (v4) Calculate the DDB blocks needed to satisfy the current atomic transaction at atomic check time. This is a prerequisite to calculating SKL watermarks during the 'check' phase and rejecting any configurations that we can't find valid watermarks for. Due to the nature of DDB allocation, it's possible for the addition of a new CRTC to make the watermark configuration already in use on another, unchanged CRTC become invalid. A change in which CRTC's are active triggers a recompute of the entire DDB, which unfortunately means we need to disallow any other atomic commits from racing with such an update. If the active CRTC's change, we need to grab the lock on all CRTC's and run all CRTC's through their 'check' handler to recompute and re-check their per-CRTC DDB allocations. Note that with this patch we only compute the DDB allocation but we don't actually use the computed values during watermark programming yet. For ease of review/testing/bisecting, we still recompute the DDB at watermark programming time and just WARN() if it doesn't match the precomputed values. A future patch will switch over to using the precomputed values once we're sure they're being properly computed. Another clarifying note: DDB allocation itself shouldn't ever fail with the algorithm we use today (i.e., we have enough DDB blocks on BXT to support the minimum needs of the worst-case scenario of every pipe/plane enabled at full size). However the watermarks calculations based on the DDB may fail and we'll be moving those to the atomic check as well in future patches. v2: - Skip DDB calculations in the rare case where our transaction doesn't actually touch any CRTC's at all. Assuming at least one CRTC state is present in our transaction, then it means we can't race with any transactions that would update dev_priv->active_crtcs (which requires _all_ CRTC locks). v3: - Also calculate DDB during initial hw readout, to prevent using incorrect bios values. (Maarten) v4: - Use new distrust_bios_wm flag instead of skip_initial_wm (which was never actually set). - Set intel_state->active_pipe_changes instead of just realloc_pipes Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lyude Paul <cpaul@redhat.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463061971-19638-10-git-send-email-matthew.d.roper@intel.com
2016-05-12 08:06:03 -06:00
drm/i915/gen9: fix DDB partitioning for multi-screen cases With the previous code we were only recomputing the DDB partitioning for the CRTCs included in the atomic commit, so any other active CRTCs would end up having their DDB registers zeroed. In this patch we make sure that the computed state starts as a copy of the current partitioning, and then we only zero the DDBs that we're actually going to recompute. How to reproduce the bug: 1 - Enable the primary plane on pipe A 2 - Enable the primary plane on pipe B 3 - Enable the cursor or sprite plane on pipe A Step 3 will zero the DDB partitioning for pipe B since it's not included in the commit that enabled the cursor or sprite for pipe A. I expect this to fix many FIFO underrun problems on gen9+. v2: - Mention the cursor on the steps to reproduce the problem (Paulo). - Add Testcase tag provided by Maarten (Maarten). Testcase: kms_cursor_legacy.cursorA-vs-flipB-atomic-transitions Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97596 Bugzilla: https://www.phoronix.com/scan.php?page=news_item&px=Intel-Skylake-Multi-Screen-Woes Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475602652-17326-1-git-send-email-paulo.r.zanoni@intel.com
2016-10-04 11:37:32 -06:00
memcpy(ddb, &dev_priv->wm.skl_hw.ddb, sizeof(*ddb));
for_each_oldnew_intel_crtc_in_state(intel_state, crtc, old_crtc_state,
new_crtc_state, i) {
ret = skl_allocate_pipe_ddb(new_crtc_state, ddb);
if (ret)
return ret;
ret = skl_ddb_add_affected_planes(old_crtc_state,
new_crtc_state);
if (ret)
return ret;
drm/i915/gen9: Compute DDB allocation at atomic check time (v4) Calculate the DDB blocks needed to satisfy the current atomic transaction at atomic check time. This is a prerequisite to calculating SKL watermarks during the 'check' phase and rejecting any configurations that we can't find valid watermarks for. Due to the nature of DDB allocation, it's possible for the addition of a new CRTC to make the watermark configuration already in use on another, unchanged CRTC become invalid. A change in which CRTC's are active triggers a recompute of the entire DDB, which unfortunately means we need to disallow any other atomic commits from racing with such an update. If the active CRTC's change, we need to grab the lock on all CRTC's and run all CRTC's through their 'check' handler to recompute and re-check their per-CRTC DDB allocations. Note that with this patch we only compute the DDB allocation but we don't actually use the computed values during watermark programming yet. For ease of review/testing/bisecting, we still recompute the DDB at watermark programming time and just WARN() if it doesn't match the precomputed values. A future patch will switch over to using the precomputed values once we're sure they're being properly computed. Another clarifying note: DDB allocation itself shouldn't ever fail with the algorithm we use today (i.e., we have enough DDB blocks on BXT to support the minimum needs of the worst-case scenario of every pipe/plane enabled at full size). However the watermarks calculations based on the DDB may fail and we'll be moving those to the atomic check as well in future patches. v2: - Skip DDB calculations in the rare case where our transaction doesn't actually touch any CRTC's at all. Assuming at least one CRTC state is present in our transaction, then it means we can't race with any transactions that would update dev_priv->active_crtcs (which requires _all_ CRTC locks). v3: - Also calculate DDB during initial hw readout, to prevent using incorrect bios values. (Maarten) v4: - Use new distrust_bios_wm flag instead of skip_initial_wm (which was never actually set). - Set intel_state->active_pipe_changes instead of just realloc_pipes Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lyude Paul <cpaul@redhat.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463061971-19638-10-git-send-email-matthew.d.roper@intel.com
2016-05-12 08:06:03 -06:00
}
return 0;
}
static void
skl_print_wm_changes(struct intel_atomic_state *state)
{
struct drm_i915_private *dev_priv = to_i915(state->base.dev);
const struct intel_crtc_state *old_crtc_state;
const struct intel_crtc_state *new_crtc_state;
struct intel_plane *plane;
struct intel_crtc *crtc;
int i;
for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
new_crtc_state, i) {
for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
enum plane_id plane_id = plane->id;
const struct skl_ddb_entry *old, *new;
old = &old_crtc_state->wm.skl.plane_ddb_y[plane_id];
new = &new_crtc_state->wm.skl.plane_ddb_y[plane_id];
if (skl_ddb_entry_equal(old, new))
continue;
DRM_DEBUG_KMS("[PLANE:%d:%s] ddb (%d - %d) -> (%d - %d)\n",
plane->base.base.id, plane->base.name,
old->start, old->end,
new->start, new->end);
}
}
}
drm/i915/gen9: Compute DDB allocation at atomic check time (v4) Calculate the DDB blocks needed to satisfy the current atomic transaction at atomic check time. This is a prerequisite to calculating SKL watermarks during the 'check' phase and rejecting any configurations that we can't find valid watermarks for. Due to the nature of DDB allocation, it's possible for the addition of a new CRTC to make the watermark configuration already in use on another, unchanged CRTC become invalid. A change in which CRTC's are active triggers a recompute of the entire DDB, which unfortunately means we need to disallow any other atomic commits from racing with such an update. If the active CRTC's change, we need to grab the lock on all CRTC's and run all CRTC's through their 'check' handler to recompute and re-check their per-CRTC DDB allocations. Note that with this patch we only compute the DDB allocation but we don't actually use the computed values during watermark programming yet. For ease of review/testing/bisecting, we still recompute the DDB at watermark programming time and just WARN() if it doesn't match the precomputed values. A future patch will switch over to using the precomputed values once we're sure they're being properly computed. Another clarifying note: DDB allocation itself shouldn't ever fail with the algorithm we use today (i.e., we have enough DDB blocks on BXT to support the minimum needs of the worst-case scenario of every pipe/plane enabled at full size). However the watermarks calculations based on the DDB may fail and we'll be moving those to the atomic check as well in future patches. v2: - Skip DDB calculations in the rare case where our transaction doesn't actually touch any CRTC's at all. Assuming at least one CRTC state is present in our transaction, then it means we can't race with any transactions that would update dev_priv->active_crtcs (which requires _all_ CRTC locks). v3: - Also calculate DDB during initial hw readout, to prevent using incorrect bios values. (Maarten) v4: - Use new distrust_bios_wm flag instead of skip_initial_wm (which was never actually set). - Set intel_state->active_pipe_changes instead of just realloc_pipes Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lyude Paul <cpaul@redhat.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463061971-19638-10-git-send-email-matthew.d.roper@intel.com
2016-05-12 08:06:03 -06:00
static int
skl_ddb_add_affected_pipes(struct drm_atomic_state *state, bool *changed)
drm/i915/gen9: Compute DDB allocation at atomic check time (v4) Calculate the DDB blocks needed to satisfy the current atomic transaction at atomic check time. This is a prerequisite to calculating SKL watermarks during the 'check' phase and rejecting any configurations that we can't find valid watermarks for. Due to the nature of DDB allocation, it's possible for the addition of a new CRTC to make the watermark configuration already in use on another, unchanged CRTC become invalid. A change in which CRTC's are active triggers a recompute of the entire DDB, which unfortunately means we need to disallow any other atomic commits from racing with such an update. If the active CRTC's change, we need to grab the lock on all CRTC's and run all CRTC's through their 'check' handler to recompute and re-check their per-CRTC DDB allocations. Note that with this patch we only compute the DDB allocation but we don't actually use the computed values during watermark programming yet. For ease of review/testing/bisecting, we still recompute the DDB at watermark programming time and just WARN() if it doesn't match the precomputed values. A future patch will switch over to using the precomputed values once we're sure they're being properly computed. Another clarifying note: DDB allocation itself shouldn't ever fail with the algorithm we use today (i.e., we have enough DDB blocks on BXT to support the minimum needs of the worst-case scenario of every pipe/plane enabled at full size). However the watermarks calculations based on the DDB may fail and we'll be moving those to the atomic check as well in future patches. v2: - Skip DDB calculations in the rare case where our transaction doesn't actually touch any CRTC's at all. Assuming at least one CRTC state is present in our transaction, then it means we can't race with any transactions that would update dev_priv->active_crtcs (which requires _all_ CRTC locks). v3: - Also calculate DDB during initial hw readout, to prevent using incorrect bios values. (Maarten) v4: - Use new distrust_bios_wm flag instead of skip_initial_wm (which was never actually set). - Set intel_state->active_pipe_changes instead of just realloc_pipes Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lyude Paul <cpaul@redhat.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463061971-19638-10-git-send-email-matthew.d.roper@intel.com
2016-05-12 08:06:03 -06:00
{
struct drm_device *dev = state->dev;
const struct drm_i915_private *dev_priv = to_i915(dev);
const struct drm_crtc *crtc;
const struct drm_crtc_state *cstate;
struct intel_crtc *intel_crtc;
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
uint32_t realloc_pipes = pipes_modified(state);
drm/i915/gen9: Calculate watermarks during atomic 'check' (v2) Moving watermark calculation into the check phase will allow us to to reject display configurations for which there are no valid watermark values before we start trying to program the hardware (although those tests will come in a subsequent patch). Another advantage of moving this calculation to the check phase is that we can calculate the watermarks in a single shot as part of the atomic transaction. The watermark interfaces we inherited from our legacy modesetting days are a bit broken in the atomic design because they use per-crtc entry points but actually re-calculate and re-program something that is really more of a global state. That worked okay in the legacy modesetting world because operations only ever updated a single CRTC at a time. However in the atomic world, a transaction can involve multiple CRTC's, which means we wind up computing and programming the watermarks NxN times (where N is the number of CRTC's involved). With this patch we eliminate the redundant re-calculation of watermark data for atomic states (which was the cause of the WARN_ON(!wm_changed) problems that have plagued us for a while). We still need to work on the 'commit' side of watermark handling so that we aren't doing redundant NxN programming of watermarks, but that's content for future patches. v2: - Bail out of skl_write_wm_values() if the CRTC isn't active. Now that we set dirty_pipes to ~0 if the active pipes change (because we need to deal with DDB changes), we can now wind up here for disabled pipes, whereas we couldn't before. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89055 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92181 Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Tested-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463091100-13747-1-git-send-email-matthew.d.roper@intel.com
2016-05-12 16:11:40 -06:00
int ret, i;
drm/i915/gen9: Compute DDB allocation at atomic check time (v4) Calculate the DDB blocks needed to satisfy the current atomic transaction at atomic check time. This is a prerequisite to calculating SKL watermarks during the 'check' phase and rejecting any configurations that we can't find valid watermarks for. Due to the nature of DDB allocation, it's possible for the addition of a new CRTC to make the watermark configuration already in use on another, unchanged CRTC become invalid. A change in which CRTC's are active triggers a recompute of the entire DDB, which unfortunately means we need to disallow any other atomic commits from racing with such an update. If the active CRTC's change, we need to grab the lock on all CRTC's and run all CRTC's through their 'check' handler to recompute and re-check their per-CRTC DDB allocations. Note that with this patch we only compute the DDB allocation but we don't actually use the computed values during watermark programming yet. For ease of review/testing/bisecting, we still recompute the DDB at watermark programming time and just WARN() if it doesn't match the precomputed values. A future patch will switch over to using the precomputed values once we're sure they're being properly computed. Another clarifying note: DDB allocation itself shouldn't ever fail with the algorithm we use today (i.e., we have enough DDB blocks on BXT to support the minimum needs of the worst-case scenario of every pipe/plane enabled at full size). However the watermarks calculations based on the DDB may fail and we'll be moving those to the atomic check as well in future patches. v2: - Skip DDB calculations in the rare case where our transaction doesn't actually touch any CRTC's at all. Assuming at least one CRTC state is present in our transaction, then it means we can't race with any transactions that would update dev_priv->active_crtcs (which requires _all_ CRTC locks). v3: - Also calculate DDB during initial hw readout, to prevent using incorrect bios values. (Maarten) v4: - Use new distrust_bios_wm flag instead of skip_initial_wm (which was never actually set). - Set intel_state->active_pipe_changes instead of just realloc_pipes Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lyude Paul <cpaul@redhat.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463061971-19638-10-git-send-email-matthew.d.roper@intel.com
2016-05-12 08:06:03 -06:00
/*
* When we distrust bios wm we always need to recompute to set the
* expected DDB allocations for each CRTC.
*/
if (dev_priv->wm.distrust_bios_wm)
(*changed) = true;
drm/i915/gen9: Compute DDB allocation at atomic check time (v4) Calculate the DDB blocks needed to satisfy the current atomic transaction at atomic check time. This is a prerequisite to calculating SKL watermarks during the 'check' phase and rejecting any configurations that we can't find valid watermarks for. Due to the nature of DDB allocation, it's possible for the addition of a new CRTC to make the watermark configuration already in use on another, unchanged CRTC become invalid. A change in which CRTC's are active triggers a recompute of the entire DDB, which unfortunately means we need to disallow any other atomic commits from racing with such an update. If the active CRTC's change, we need to grab the lock on all CRTC's and run all CRTC's through their 'check' handler to recompute and re-check their per-CRTC DDB allocations. Note that with this patch we only compute the DDB allocation but we don't actually use the computed values during watermark programming yet. For ease of review/testing/bisecting, we still recompute the DDB at watermark programming time and just WARN() if it doesn't match the precomputed values. A future patch will switch over to using the precomputed values once we're sure they're being properly computed. Another clarifying note: DDB allocation itself shouldn't ever fail with the algorithm we use today (i.e., we have enough DDB blocks on BXT to support the minimum needs of the worst-case scenario of every pipe/plane enabled at full size). However the watermarks calculations based on the DDB may fail and we'll be moving those to the atomic check as well in future patches. v2: - Skip DDB calculations in the rare case where our transaction doesn't actually touch any CRTC's at all. Assuming at least one CRTC state is present in our transaction, then it means we can't race with any transactions that would update dev_priv->active_crtcs (which requires _all_ CRTC locks). v3: - Also calculate DDB during initial hw readout, to prevent using incorrect bios values. (Maarten) v4: - Use new distrust_bios_wm flag instead of skip_initial_wm (which was never actually set). - Set intel_state->active_pipe_changes instead of just realloc_pipes Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lyude Paul <cpaul@redhat.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463061971-19638-10-git-send-email-matthew.d.roper@intel.com
2016-05-12 08:06:03 -06:00
/*
* If this transaction isn't actually touching any CRTC's, don't
* bother with watermark calculation. Note that if we pass this
* test, we're guaranteed to hold at least one CRTC state mutex,
* which means we can safely use values like dev_priv->active_crtcs
* since any racing commits that want to update them would need to
* hold _all_ CRTC state mutexes.
*/
for_each_new_crtc_in_state(state, crtc, cstate, i)
(*changed) = true;
if (!*changed)
drm/i915/gen9: Compute DDB allocation at atomic check time (v4) Calculate the DDB blocks needed to satisfy the current atomic transaction at atomic check time. This is a prerequisite to calculating SKL watermarks during the 'check' phase and rejecting any configurations that we can't find valid watermarks for. Due to the nature of DDB allocation, it's possible for the addition of a new CRTC to make the watermark configuration already in use on another, unchanged CRTC become invalid. A change in which CRTC's are active triggers a recompute of the entire DDB, which unfortunately means we need to disallow any other atomic commits from racing with such an update. If the active CRTC's change, we need to grab the lock on all CRTC's and run all CRTC's through their 'check' handler to recompute and re-check their per-CRTC DDB allocations. Note that with this patch we only compute the DDB allocation but we don't actually use the computed values during watermark programming yet. For ease of review/testing/bisecting, we still recompute the DDB at watermark programming time and just WARN() if it doesn't match the precomputed values. A future patch will switch over to using the precomputed values once we're sure they're being properly computed. Another clarifying note: DDB allocation itself shouldn't ever fail with the algorithm we use today (i.e., we have enough DDB blocks on BXT to support the minimum needs of the worst-case scenario of every pipe/plane enabled at full size). However the watermarks calculations based on the DDB may fail and we'll be moving those to the atomic check as well in future patches. v2: - Skip DDB calculations in the rare case where our transaction doesn't actually touch any CRTC's at all. Assuming at least one CRTC state is present in our transaction, then it means we can't race with any transactions that would update dev_priv->active_crtcs (which requires _all_ CRTC locks). v3: - Also calculate DDB during initial hw readout, to prevent using incorrect bios values. (Maarten) v4: - Use new distrust_bios_wm flag instead of skip_initial_wm (which was never actually set). - Set intel_state->active_pipe_changes instead of just realloc_pipes Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lyude Paul <cpaul@redhat.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463061971-19638-10-git-send-email-matthew.d.roper@intel.com
2016-05-12 08:06:03 -06:00
return 0;
/*
* If this is our first atomic update following hardware readout,
* we can't trust the DDB that the BIOS programmed for us. Let's
* pretend that all pipes switched active status so that we'll
* ensure a full DDB recompute.
*/
if (dev_priv->wm.distrust_bios_wm) {
ret = drm_modeset_lock(&dev->mode_config.connection_mutex,
state->acquire_ctx);
if (ret)
return ret;
intel_state->active_pipe_changes = ~0;
/*
* We usually only initialize intel_state->active_crtcs if we
* we're doing a modeset; make sure this field is always
* initialized during the sanitization process that happens
* on the first commit too.
*/
if (!intel_state->modeset)
intel_state->active_crtcs = dev_priv->active_crtcs;
}
/*
* If the modeset changes which CRTC's are active, we need to
* recompute the DDB allocation for *all* active pipes, even
* those that weren't otherwise being modified in any way by this
* atomic commit. Due to the shrinking of the per-pipe allocations
* when new active CRTC's are added, it's possible for a pipe that
* we were already using and aren't changing at all here to suddenly
* become invalid if its DDB needs exceeds its new allocation.
*
* Note that if we wind up doing a full DDB recompute, we can't let
* any other display updates race with this transaction, so we need
* to grab the lock on *all* CRTC's.
*/
if (intel_state->active_pipe_changes || intel_state->modeset) {
realloc_pipes = ~0;
intel_state->wm_results.dirty_pipes = ~0;
}
/*
* We're not recomputing for the pipes not included in the commit, so
* make sure we start with the current state.
*/
for_each_intel_crtc_mask(dev, intel_crtc, realloc_pipes) {
struct intel_crtc_state *cstate;
cstate = intel_atomic_get_crtc_state(state, intel_crtc);
if (IS_ERR(cstate))
return PTR_ERR(cstate);
}
return 0;
}
/*
* To make sure the cursor watermark registers are always consistent
* with our computed state the following scenario needs special
* treatment:
*
* 1. enable cursor
* 2. move cursor entirely offscreen
* 3. disable cursor
*
* Step 2. does call .disable_plane() but does not zero the watermarks
* (since we consider an offscreen cursor still active for the purposes
* of watermarks). Step 3. would not normally call .disable_plane()
* because the actual plane visibility isn't changing, and we don't
* deallocate the cursor ddb until the pipe gets disabled. So we must
* force step 3. to call .disable_plane() to update the watermark
* registers properly.
*
* Other planes do not suffer from this issues as their watermarks are
* calculated based on the actual plane visibility. The only time this
* can trigger for the other planes is during the initial readout as the
* default value of the watermarks registers is not zero.
*/
static int skl_wm_add_affected_planes(struct intel_atomic_state *state,
struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
const struct intel_crtc_state *old_crtc_state =
intel_atomic_get_old_crtc_state(state, crtc);
struct intel_crtc_state *new_crtc_state =
intel_atomic_get_new_crtc_state(state, crtc);
struct intel_plane *plane;
for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
struct intel_plane_state *plane_state;
enum plane_id plane_id = plane->id;
/*
* Force a full wm update for every plane on modeset.
* Required because the reset value of the wm registers
* is non-zero, whereas we want all disabled planes to
* have zero watermarks. So if we turn off the relevant
* power well the hardware state will go out of sync
* with the software state.
*/
if (!drm_atomic_crtc_needs_modeset(&new_crtc_state->base) &&
skl_plane_wm_equals(dev_priv,
&old_crtc_state->wm.skl.optimal.planes[plane_id],
&new_crtc_state->wm.skl.optimal.planes[plane_id]))
continue;
plane_state = intel_atomic_get_plane_state(state, plane);
if (IS_ERR(plane_state))
return PTR_ERR(plane_state);
new_crtc_state->update_planes |= BIT(plane_id);
}
return 0;
}
static int
skl_compute_wm(struct drm_atomic_state *state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *cstate;
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
struct skl_ddb_values *results = &intel_state->wm_results;
struct skl_pipe_wm *pipe_wm;
bool changed = false;
int ret, i;
drm/i915/gen9: Calculate watermarks during atomic 'check' (v2) Moving watermark calculation into the check phase will allow us to to reject display configurations for which there are no valid watermark values before we start trying to program the hardware (although those tests will come in a subsequent patch). Another advantage of moving this calculation to the check phase is that we can calculate the watermarks in a single shot as part of the atomic transaction. The watermark interfaces we inherited from our legacy modesetting days are a bit broken in the atomic design because they use per-crtc entry points but actually re-calculate and re-program something that is really more of a global state. That worked okay in the legacy modesetting world because operations only ever updated a single CRTC at a time. However in the atomic world, a transaction can involve multiple CRTC's, which means we wind up computing and programming the watermarks NxN times (where N is the number of CRTC's involved). With this patch we eliminate the redundant re-calculation of watermark data for atomic states (which was the cause of the WARN_ON(!wm_changed) problems that have plagued us for a while). We still need to work on the 'commit' side of watermark handling so that we aren't doing redundant NxN programming of watermarks, but that's content for future patches. v2: - Bail out of skl_write_wm_values() if the CRTC isn't active. Now that we set dirty_pipes to ~0 if the active pipes change (because we need to deal with DDB changes), we can now wind up here for disabled pipes, whereas we couldn't before. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89055 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92181 Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Tested-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463091100-13747-1-git-send-email-matthew.d.roper@intel.com
2016-05-12 16:11:40 -06:00
/* Clear all dirty flags */
results->dirty_pipes = 0;
ret = skl_ddb_add_affected_pipes(state, &changed);
if (ret || !changed)
return ret;
ret = skl_compute_ddb(state);
drm/i915/gen9: Compute DDB allocation at atomic check time (v4) Calculate the DDB blocks needed to satisfy the current atomic transaction at atomic check time. This is a prerequisite to calculating SKL watermarks during the 'check' phase and rejecting any configurations that we can't find valid watermarks for. Due to the nature of DDB allocation, it's possible for the addition of a new CRTC to make the watermark configuration already in use on another, unchanged CRTC become invalid. A change in which CRTC's are active triggers a recompute of the entire DDB, which unfortunately means we need to disallow any other atomic commits from racing with such an update. If the active CRTC's change, we need to grab the lock on all CRTC's and run all CRTC's through their 'check' handler to recompute and re-check their per-CRTC DDB allocations. Note that with this patch we only compute the DDB allocation but we don't actually use the computed values during watermark programming yet. For ease of review/testing/bisecting, we still recompute the DDB at watermark programming time and just WARN() if it doesn't match the precomputed values. A future patch will switch over to using the precomputed values once we're sure they're being properly computed. Another clarifying note: DDB allocation itself shouldn't ever fail with the algorithm we use today (i.e., we have enough DDB blocks on BXT to support the minimum needs of the worst-case scenario of every pipe/plane enabled at full size). However the watermarks calculations based on the DDB may fail and we'll be moving those to the atomic check as well in future patches. v2: - Skip DDB calculations in the rare case where our transaction doesn't actually touch any CRTC's at all. Assuming at least one CRTC state is present in our transaction, then it means we can't race with any transactions that would update dev_priv->active_crtcs (which requires _all_ CRTC locks). v3: - Also calculate DDB during initial hw readout, to prevent using incorrect bios values. (Maarten) v4: - Use new distrust_bios_wm flag instead of skip_initial_wm (which was never actually set). - Set intel_state->active_pipe_changes instead of just realloc_pipes Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lyude Paul <cpaul@redhat.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463061971-19638-10-git-send-email-matthew.d.roper@intel.com
2016-05-12 08:06:03 -06:00
if (ret)
return ret;
drm/i915/gen9: Calculate watermarks during atomic 'check' (v2) Moving watermark calculation into the check phase will allow us to to reject display configurations for which there are no valid watermark values before we start trying to program the hardware (although those tests will come in a subsequent patch). Another advantage of moving this calculation to the check phase is that we can calculate the watermarks in a single shot as part of the atomic transaction. The watermark interfaces we inherited from our legacy modesetting days are a bit broken in the atomic design because they use per-crtc entry points but actually re-calculate and re-program something that is really more of a global state. That worked okay in the legacy modesetting world because operations only ever updated a single CRTC at a time. However in the atomic world, a transaction can involve multiple CRTC's, which means we wind up computing and programming the watermarks NxN times (where N is the number of CRTC's involved). With this patch we eliminate the redundant re-calculation of watermark data for atomic states (which was the cause of the WARN_ON(!wm_changed) problems that have plagued us for a while). We still need to work on the 'commit' side of watermark handling so that we aren't doing redundant NxN programming of watermarks, but that's content for future patches. v2: - Bail out of skl_write_wm_values() if the CRTC isn't active. Now that we set dirty_pipes to ~0 if the active pipes change (because we need to deal with DDB changes), we can now wind up here for disabled pipes, whereas we couldn't before. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89055 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92181 Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Tested-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463091100-13747-1-git-send-email-matthew.d.roper@intel.com
2016-05-12 16:11:40 -06:00
/*
* Calculate WM's for all pipes that are part of this transaction.
* Note that the DDB allocation above may have added more CRTC's that
* weren't otherwise being modified (and set bits in dirty_pipes) if
* pipe allocations had to change.
*
* FIXME: Now that we're doing this in the atomic check phase, we
* should allow skl_update_pipe_wm() to return failure in cases where
* no suitable watermark values can be found.
*/
for_each_new_crtc_in_state(state, crtc, cstate, i) {
drm/i915/gen9: Calculate watermarks during atomic 'check' (v2) Moving watermark calculation into the check phase will allow us to to reject display configurations for which there are no valid watermark values before we start trying to program the hardware (although those tests will come in a subsequent patch). Another advantage of moving this calculation to the check phase is that we can calculate the watermarks in a single shot as part of the atomic transaction. The watermark interfaces we inherited from our legacy modesetting days are a bit broken in the atomic design because they use per-crtc entry points but actually re-calculate and re-program something that is really more of a global state. That worked okay in the legacy modesetting world because operations only ever updated a single CRTC at a time. However in the atomic world, a transaction can involve multiple CRTC's, which means we wind up computing and programming the watermarks NxN times (where N is the number of CRTC's involved). With this patch we eliminate the redundant re-calculation of watermark data for atomic states (which was the cause of the WARN_ON(!wm_changed) problems that have plagued us for a while). We still need to work on the 'commit' side of watermark handling so that we aren't doing redundant NxN programming of watermarks, but that's content for future patches. v2: - Bail out of skl_write_wm_values() if the CRTC isn't active. Now that we set dirty_pipes to ~0 if the active pipes change (because we need to deal with DDB changes), we can now wind up here for disabled pipes, whereas we couldn't before. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89055 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92181 Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Tested-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463091100-13747-1-git-send-email-matthew.d.roper@intel.com
2016-05-12 16:11:40 -06:00
struct intel_crtc_state *intel_cstate =
to_intel_crtc_state(cstate);
const struct skl_pipe_wm *old_pipe_wm =
&to_intel_crtc_state(crtc->state)->wm.skl.optimal;
drm/i915/gen9: Calculate watermarks during atomic 'check' (v2) Moving watermark calculation into the check phase will allow us to to reject display configurations for which there are no valid watermark values before we start trying to program the hardware (although those tests will come in a subsequent patch). Another advantage of moving this calculation to the check phase is that we can calculate the watermarks in a single shot as part of the atomic transaction. The watermark interfaces we inherited from our legacy modesetting days are a bit broken in the atomic design because they use per-crtc entry points but actually re-calculate and re-program something that is really more of a global state. That worked okay in the legacy modesetting world because operations only ever updated a single CRTC at a time. However in the atomic world, a transaction can involve multiple CRTC's, which means we wind up computing and programming the watermarks NxN times (where N is the number of CRTC's involved). With this patch we eliminate the redundant re-calculation of watermark data for atomic states (which was the cause of the WARN_ON(!wm_changed) problems that have plagued us for a while). We still need to work on the 'commit' side of watermark handling so that we aren't doing redundant NxN programming of watermarks, but that's content for future patches. v2: - Bail out of skl_write_wm_values() if the CRTC isn't active. Now that we set dirty_pipes to ~0 if the active pipes change (because we need to deal with DDB changes), we can now wind up here for disabled pipes, whereas we couldn't before. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89055 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92181 Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Tested-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463091100-13747-1-git-send-email-matthew.d.roper@intel.com
2016-05-12 16:11:40 -06:00
pipe_wm = &intel_cstate->wm.skl.optimal;
ret = skl_update_pipe_wm(cstate, old_pipe_wm, pipe_wm, &changed);
if (ret)
return ret;
ret = skl_wm_add_affected_planes(intel_state,
to_intel_crtc(crtc));
drm/i915/gen9: Calculate watermarks during atomic 'check' (v2) Moving watermark calculation into the check phase will allow us to to reject display configurations for which there are no valid watermark values before we start trying to program the hardware (although those tests will come in a subsequent patch). Another advantage of moving this calculation to the check phase is that we can calculate the watermarks in a single shot as part of the atomic transaction. The watermark interfaces we inherited from our legacy modesetting days are a bit broken in the atomic design because they use per-crtc entry points but actually re-calculate and re-program something that is really more of a global state. That worked okay in the legacy modesetting world because operations only ever updated a single CRTC at a time. However in the atomic world, a transaction can involve multiple CRTC's, which means we wind up computing and programming the watermarks NxN times (where N is the number of CRTC's involved). With this patch we eliminate the redundant re-calculation of watermark data for atomic states (which was the cause of the WARN_ON(!wm_changed) problems that have plagued us for a while). We still need to work on the 'commit' side of watermark handling so that we aren't doing redundant NxN programming of watermarks, but that's content for future patches. v2: - Bail out of skl_write_wm_values() if the CRTC isn't active. Now that we set dirty_pipes to ~0 if the active pipes change (because we need to deal with DDB changes), we can now wind up here for disabled pipes, whereas we couldn't before. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89055 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92181 Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Tested-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463091100-13747-1-git-send-email-matthew.d.roper@intel.com
2016-05-12 16:11:40 -06:00
if (ret)
return ret;
if (changed)
results->dirty_pipes |= drm_crtc_mask(crtc);
if ((results->dirty_pipes & drm_crtc_mask(crtc)) == 0)
/* This pipe's WM's did not change */
continue;
intel_cstate->update_wm_pre = true;
}
skl_print_wm_changes(intel_state);
drm/i915/gen9: Compute DDB allocation at atomic check time (v4) Calculate the DDB blocks needed to satisfy the current atomic transaction at atomic check time. This is a prerequisite to calculating SKL watermarks during the 'check' phase and rejecting any configurations that we can't find valid watermarks for. Due to the nature of DDB allocation, it's possible for the addition of a new CRTC to make the watermark configuration already in use on another, unchanged CRTC become invalid. A change in which CRTC's are active triggers a recompute of the entire DDB, which unfortunately means we need to disallow any other atomic commits from racing with such an update. If the active CRTC's change, we need to grab the lock on all CRTC's and run all CRTC's through their 'check' handler to recompute and re-check their per-CRTC DDB allocations. Note that with this patch we only compute the DDB allocation but we don't actually use the computed values during watermark programming yet. For ease of review/testing/bisecting, we still recompute the DDB at watermark programming time and just WARN() if it doesn't match the precomputed values. A future patch will switch over to using the precomputed values once we're sure they're being properly computed. Another clarifying note: DDB allocation itself shouldn't ever fail with the algorithm we use today (i.e., we have enough DDB blocks on BXT to support the minimum needs of the worst-case scenario of every pipe/plane enabled at full size). However the watermarks calculations based on the DDB may fail and we'll be moving those to the atomic check as well in future patches. v2: - Skip DDB calculations in the rare case where our transaction doesn't actually touch any CRTC's at all. Assuming at least one CRTC state is present in our transaction, then it means we can't race with any transactions that would update dev_priv->active_crtcs (which requires _all_ CRTC locks). v3: - Also calculate DDB during initial hw readout, to prevent using incorrect bios values. (Maarten) v4: - Use new distrust_bios_wm flag instead of skip_initial_wm (which was never actually set). - Set intel_state->active_pipe_changes instead of just realloc_pipes Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lyude Paul <cpaul@redhat.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463061971-19638-10-git-send-email-matthew.d.roper@intel.com
2016-05-12 08:06:03 -06:00
return 0;
}
static void skl_atomic_update_crtc_wm(struct intel_atomic_state *state,
struct intel_crtc_state *cstate)
{
struct intel_crtc *crtc = to_intel_crtc(cstate->base.crtc);
struct drm_i915_private *dev_priv = to_i915(state->base.dev);
struct skl_pipe_wm *pipe_wm = &cstate->wm.skl.optimal;
enum pipe pipe = crtc->pipe;
if (!(state->wm_results.dirty_pipes & drm_crtc_mask(&crtc->base)))
return;
I915_WRITE(PIPE_WM_LINETIME(pipe), pipe_wm->linetime);
}
static void skl_initial_wm(struct intel_atomic_state *state,
struct intel_crtc_state *cstate)
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
{
struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
struct drm_device *dev = intel_crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct skl_ddb_values *results = &state->wm_results;
if ((results->dirty_pipes & drm_crtc_mask(&intel_crtc->base)) == 0)
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
return;
drm/i915/gen9: Calculate watermarks during atomic 'check' (v2) Moving watermark calculation into the check phase will allow us to to reject display configurations for which there are no valid watermark values before we start trying to program the hardware (although those tests will come in a subsequent patch). Another advantage of moving this calculation to the check phase is that we can calculate the watermarks in a single shot as part of the atomic transaction. The watermark interfaces we inherited from our legacy modesetting days are a bit broken in the atomic design because they use per-crtc entry points but actually re-calculate and re-program something that is really more of a global state. That worked okay in the legacy modesetting world because operations only ever updated a single CRTC at a time. However in the atomic world, a transaction can involve multiple CRTC's, which means we wind up computing and programming the watermarks NxN times (where N is the number of CRTC's involved). With this patch we eliminate the redundant re-calculation of watermark data for atomic states (which was the cause of the WARN_ON(!wm_changed) problems that have plagued us for a while). We still need to work on the 'commit' side of watermark handling so that we aren't doing redundant NxN programming of watermarks, but that's content for future patches. v2: - Bail out of skl_write_wm_values() if the CRTC isn't active. Now that we set dirty_pipes to ~0 if the active pipes change (because we need to deal with DDB changes), we can now wind up here for disabled pipes, whereas we couldn't before. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89055 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92181 Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Tested-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463091100-13747-1-git-send-email-matthew.d.roper@intel.com
2016-05-12 16:11:40 -06:00
mutex_lock(&dev_priv->wm.wm_mutex);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
if (cstate->base.active_changed)
skl_atomic_update_crtc_wm(state, cstate);
drm/i915/skl: Update DDB values atomically with wms/plane attrs Now that we can hook into update_crtcs and control the order in which we update CRTCs at each modeset, we can finish the final step of fixing Skylake's watermark handling by performing DDB updates at the same time as plane updates and watermark updates. The first major change in this patch is skl_update_crtcs(), which handles ensuring that we order each CRTC update in our atomic commits properly so that they honor the DDB flush order. The second major change in this patch is the order in which we flush the pipes. While the previous order may have worked, it can't be used in this approach since it no longer will do the right thing. For example, using the old ddb flush order: We have pipes A, B, and C enabled, and we're disabling C. Initial ddb allocation looks like this: | A | B |xxxxxxx| Since we're performing the ddb updates after performing any CRTC disablements in intel_atomic_commit_tail(), the space to the right of pipe B is unallocated. 1. Flush pipes with new allocation contained into old space. None apply, so we skip this 2. Flush pipes having their allocation reduced, but overlapping with a previous allocation. None apply, so we also skip this 3. Flush pipes that got more space allocated. This applies to A and B, giving us the following update order: A, B This is wrong, since updating pipe A first will cause it to overlap with B and potentially burst into flames. Our new order (see the code comments for details) would update the pipes in the proper order: B, A. As well, we calculate the order for each DDB update during the check phase, and reference it later in the commit phase when we hit skl_update_crtcs(). This long overdue patch fixes the rest of the underruns on Skylake. Changes since v1: - Add skl_ddb_entry_write() for cursor into skl_write_cursor_wm() Changes since v2: - Use the method for updating CRTCs that Ville suggested - In skl_update_wm(), only copy the watermarks for the crtc that was passed to us Changes since v3: - Small comment fix in skl_ddb_allocation_overlaps() Changes since v4: - Remove the second loop in intel_update_crtcs() and use Ville's suggestion for updating the ddb allocations in the right order - Get rid of the second loop and just use the ddb state as it updates to determine what order to update everything in (thanks for the suggestion Ville) - Simplify skl_ddb_allocation_overlaps() - Split actual overlap checking into it's own helper Fixes: 0e8fb7ba7ca5 ("drm/i915/skl: Flush the WM configuration") Fixes: 8211bd5bdf5e ("drm/i915/skl: Program the DDB allocation") [omitting CC for stable, since this patch will need to be changed for such backports first] Testcase: kms_cursor_legacy Testcase: plane-all-modeset-transition Signed-off-by: Lyude <cpaul@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471961565-28540-2-git-send-email-cpaul@redhat.com
2016-08-23 23:48:10 -06:00
drm/i915/gen9: Calculate watermarks during atomic 'check' (v2) Moving watermark calculation into the check phase will allow us to to reject display configurations for which there are no valid watermark values before we start trying to program the hardware (although those tests will come in a subsequent patch). Another advantage of moving this calculation to the check phase is that we can calculate the watermarks in a single shot as part of the atomic transaction. The watermark interfaces we inherited from our legacy modesetting days are a bit broken in the atomic design because they use per-crtc entry points but actually re-calculate and re-program something that is really more of a global state. That worked okay in the legacy modesetting world because operations only ever updated a single CRTC at a time. However in the atomic world, a transaction can involve multiple CRTC's, which means we wind up computing and programming the watermarks NxN times (where N is the number of CRTC's involved). With this patch we eliminate the redundant re-calculation of watermark data for atomic states (which was the cause of the WARN_ON(!wm_changed) problems that have plagued us for a while). We still need to work on the 'commit' side of watermark handling so that we aren't doing redundant NxN programming of watermarks, but that's content for future patches. v2: - Bail out of skl_write_wm_values() if the CRTC isn't active. Now that we set dirty_pipes to ~0 if the active pipes change (because we need to deal with DDB changes), we can now wind up here for disabled pipes, whereas we couldn't before. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89055 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92181 Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Tested-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463091100-13747-1-git-send-email-matthew.d.roper@intel.com
2016-05-12 16:11:40 -06:00
mutex_unlock(&dev_priv->wm.wm_mutex);
drm/i915/skl: SKL Watermark Computation This patch implements the watermark algorithm and its necessary functions. Two function pointers skl_update_wm and skl_update_sprite_wm are provided. The skl_update_wm will update the watermarks for the crtc provided as an argument and then checks for change in DDB allocation for other active pipes and recomputes the watermarks for those Pipes and planes as well. Finally it does the register programming for all dirty pipes. The trigger of the Watermark double buffer registers will have to be once the plane configurations are done by the caller. v2: fixed the divide-by-0 error in the results computation func. Also reworked the PLANE_WM register values computation func to make it more compact. Incorporated all other review comments from Damien. v3: Changed the skl_compute_plane_wm function to now return success or failure. Also the result blocks and lines are computed here instead of in skl_compute_wm_results function. v4: Adjust skl_ddb_alloc_changed() to the new planes/cursor split (Damien) v5: Reworked the affected functions to implement new plane/cursor split. v6: Rework the logic that triggers the DDB allocation and WM computation of skl_update_other_pipe_wm() to not depend on non-computed DDB values. Always give a valid cursor_width (at boot it's 0) to keep the invariant that we consider the cursor plane always enabled. Otherwise we end up dividing by 0 in skl_compute_plane_wm() (Damien Lespiau) v7: Spell out allocation skl_ddb_ functions should have the ddb as first argument Make the skl_ddb_alloc_changed() parameters const (Damien) v8: Rebase on top of the crtc->primary changes v9: Split the staging results structure to not exceed the 1Kb stack allocation in skl_update_wm() v10: Make skl_pipe_pixel_rate() take a pointer to the pipe config Add a comment about overflow considerations for skl_wm_method1() Various additions of const Various use of sizeof(variable) instead of sizeof(type) Various move of variable definitons to a narrower scope Zero initialize some stack allocated structures to make sure we don't have garbage in case we don't write all the values (Ville) v11: Remove non-necessary default number of blocks/lines when the plane is disabled (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04 10:06:42 -07:00
}
static void ilk_compute_wm_config(struct drm_device *dev,
struct intel_wm_config *config)
{
struct intel_crtc *crtc;
/* Compute the currently _active_ config */
for_each_intel_crtc(dev, crtc) {
const struct intel_pipe_wm *wm = &crtc->wm.active.ilk;
if (!wm->pipe_enabled)
continue;
config->sprites_enabled |= wm->sprites_enabled;
config->sprites_scaled |= wm->sprites_scaled;
config->num_pipes_active++;
}
}
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
static void ilk_program_watermarks(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = &dev_priv->drm;
struct intel_pipe_wm lp_wm_1_2 = {}, lp_wm_5_6 = {}, *best_lp_wm;
struct ilk_wm_maximums max;
struct intel_wm_config config = {};
struct ilk_wm_values results = {};
enum intel_ddb_partitioning partitioning;
ilk_compute_wm_config(dev, &config);
ilk_compute_wm_maximums(dev, 1, &config, INTEL_DDB_PART_1_2, &max);
ilk_wm_merge(dev, &config, &max, &lp_wm_1_2);
/* 5/6 split only in single pipe config on IVB+ */
if (INTEL_GEN(dev_priv) >= 7 &&
config.num_pipes_active == 1 && config.sprites_enabled) {
ilk_compute_wm_maximums(dev, 1, &config, INTEL_DDB_PART_5_6, &max);
ilk_wm_merge(dev, &config, &max, &lp_wm_5_6);
best_lp_wm = ilk_find_best_result(dev, &lp_wm_1_2, &lp_wm_5_6);
} else {
best_lp_wm = &lp_wm_1_2;
}
partitioning = (best_lp_wm == &lp_wm_1_2) ?
INTEL_DDB_PART_1_2 : INTEL_DDB_PART_5_6;
ilk_compute_wm_results(dev, best_lp_wm, partitioning, &results);
ilk_write_wm_values(dev_priv, &results);
}
static void ilk_initial_watermarks(struct intel_atomic_state *state,
struct intel_crtc_state *cstate)
{
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
struct drm_i915_private *dev_priv = to_i915(cstate->base.crtc->dev);
struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
mutex_lock(&dev_priv->wm.wm_mutex);
intel_crtc->wm.active.ilk = cstate->wm.ilk.intermediate;
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
ilk_program_watermarks(dev_priv);
mutex_unlock(&dev_priv->wm.wm_mutex);
}
static void ilk_optimize_watermarks(struct intel_atomic_state *state,
struct intel_crtc_state *cstate)
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
{
struct drm_i915_private *dev_priv = to_i915(cstate->base.crtc->dev);
struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
mutex_lock(&dev_priv->wm.wm_mutex);
if (cstate->wm.need_postvbl_update) {
intel_crtc->wm.active.ilk = cstate->wm.ilk.optimal;
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
ilk_program_watermarks(dev_priv);
}
mutex_unlock(&dev_priv->wm.wm_mutex);
}
static inline void skl_wm_level_from_reg_val(uint32_t val,
struct skl_wm_level *level)
{
level->plane_en = val & PLANE_WM_EN;
level->plane_res_b = val & PLANE_WM_BLOCKS_MASK;
level->plane_res_l = (val >> PLANE_WM_LINES_SHIFT) &
PLANE_WM_LINES_MASK;
}
void skl_pipe_wm_get_hw_state(struct drm_crtc *crtc,
struct skl_pipe_wm *out)
{
struct drm_i915_private *dev_priv = to_i915(crtc->dev);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
enum pipe pipe = intel_crtc->pipe;
int level, max_level;
enum plane_id plane_id;
uint32_t val;
max_level = ilk_wm_max_level(dev_priv);
for_each_plane_id_on_crtc(intel_crtc, plane_id) {
struct skl_plane_wm *wm = &out->planes[plane_id];
for (level = 0; level <= max_level; level++) {
if (plane_id != PLANE_CURSOR)
val = I915_READ(PLANE_WM(pipe, plane_id, level));
else
val = I915_READ(CUR_WM(pipe, level));
skl_wm_level_from_reg_val(val, &wm->wm[level]);
}
if (plane_id != PLANE_CURSOR)
val = I915_READ(PLANE_WM_TRANS(pipe, plane_id));
else
val = I915_READ(CUR_WM_TRANS(pipe));
skl_wm_level_from_reg_val(val, &wm->trans_wm);
}
if (!intel_crtc->active)
return;
out->linetime = I915_READ(PIPE_WM_LINETIME(pipe));
}
void skl_wm_get_hw_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct skl_ddb_values *hw = &dev_priv->wm.skl_hw;
struct skl_ddb_allocation *ddb = &dev_priv->wm.skl_hw.ddb;
struct drm_crtc *crtc;
struct intel_crtc *intel_crtc;
struct intel_crtc_state *cstate;
skl_ddb_get_hw_state(dev_priv, ddb);
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
intel_crtc = to_intel_crtc(crtc);
cstate = to_intel_crtc_state(crtc->state);
skl_pipe_wm_get_hw_state(crtc, &cstate->wm.skl.optimal);
if (intel_crtc->active)
hw->dirty_pipes |= drm_crtc_mask(crtc);
}
if (dev_priv->active_crtcs) {
/* Fully recompute DDB on first atomic commit */
dev_priv->wm.distrust_bios_wm = true;
}
}
static void ilk_pipe_wm_get_hw_state(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct ilk_wm_values *hw = &dev_priv->wm.hw;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state);
struct intel_pipe_wm *active = &cstate->wm.ilk.optimal;
enum pipe pipe = intel_crtc->pipe;
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 06:33:26 -07:00
static const i915_reg_t wm0_pipe_reg[] = {
[PIPE_A] = WM0_PIPEA_ILK,
[PIPE_B] = WM0_PIPEB_ILK,
[PIPE_C] = WM0_PIPEC_IVB,
};
hw->wm_pipe[pipe] = I915_READ(wm0_pipe_reg[pipe]);
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
hw->wm_linetime[pipe] = I915_READ(PIPE_WM_LINETIME(pipe));
memset(active, 0, sizeof(*active));
drm/i915: Use crtc->state->active in ilk/skl watermark calculations (v3) Existing watermark code calls intel_crtc_active() to determine whether a CRTC is active for the purpose of watermark calculations (and bails out early if it determines the CRTC is not active). However intel_crtc_active() only returns true if crtc->primary->fb is non-NULL, which isn't appropriate in the modern age of universal planes and atomic modeset since userspace can now disable the primary plane, but leave the CRTC (and other planes) running. Note that commit commit 0fda65680e92545caea5be7805a7f0a617fb6c20 Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Date: Fri Feb 27 15:12:35 2015 +0000 drm/i915/skl: Update watermarks for Y tiling adds a test for primary plane enable/disable to trigger a watermark update (previously we ignored updates to primary planes, which wasn't really correct, but we got lucky since we always pretended the primary plane was on). Tvrtko's patch tries to update watermarks when we re-enable the primary plane, but that watermark computation gets aborted early because intel_crtc_active() returns false due to the disabled primary plane. Switch the ILK and SKL watermark code over to use crtc->state->active rather than calling intel_crtc_active() so that we'll properly compute watermarks when re-enabling the primary plane. Note that this commit doesn't touch callsites in the watermark code for older platforms since there were concerns that doing so would lead to other types of breakage. Also note that all of the watermark calculation at the moment takes place after new crtc/plane states are swapped into the DRM objects. This will change in the future, so we'll be working with in-flight state objects, but for the time being, crtc->state is what we want to operate on. v2: Don't drop primary->fb check from intel_crtc_active(), but rather replace ILK/SKL callsites with direct tests of crtc->state->active. There is concern that messing with intel_crtc_active() will lead to other breakage for old hardware platforms. (Ville) v3: Use intel_crtc->active for now rather than crtc->state->active since we don't have CRTC states properly hooked up and initialized yet. We'll defer the switch to crtc->state->active until the atomic CRTC state work is farther along. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-09 11:19:24 -06:00
active->pipe_enabled = intel_crtc->active;
if (active->pipe_enabled) {
u32 tmp = hw->wm_pipe[pipe];
/*
* For active pipes LP0 watermark is marked as
* enabled, and LP1+ watermaks as disabled since
* we can't really reverse compute them in case
* multiple pipes are active.
*/
active->wm[0].enable = true;
active->wm[0].pri_val = (tmp & WM0_PIPE_PLANE_MASK) >> WM0_PIPE_PLANE_SHIFT;
active->wm[0].spr_val = (tmp & WM0_PIPE_SPRITE_MASK) >> WM0_PIPE_SPRITE_SHIFT;
active->wm[0].cur_val = tmp & WM0_PIPE_CURSOR_MASK;
active->linetime = hw->wm_linetime[pipe];
} else {
int level, max_level = ilk_wm_max_level(dev_priv);
/*
* For inactive pipes, all watermark levels
* should be marked as enabled but zeroed,
* which is what we'd compute them to.
*/
for (level = 0; level <= max_level; level++)
active->wm[level].enable = true;
}
intel_crtc->wm.active.ilk = *active;
}
#define _FW_WM(value, plane) \
(((value) & DSPFW_ ## plane ## _MASK) >> DSPFW_ ## plane ## _SHIFT)
#define _FW_WM_VLV(value, plane) \
(((value) & DSPFW_ ## plane ## _MASK_VLV) >> DSPFW_ ## plane ## _SHIFT)
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
static void g4x_read_wm_values(struct drm_i915_private *dev_priv,
struct g4x_wm_values *wm)
{
uint32_t tmp;
tmp = I915_READ(DSPFW1);
wm->sr.plane = _FW_WM(tmp, SR);
wm->pipe[PIPE_B].plane[PLANE_CURSOR] = _FW_WM(tmp, CURSORB);
wm->pipe[PIPE_B].plane[PLANE_PRIMARY] = _FW_WM(tmp, PLANEB);
wm->pipe[PIPE_A].plane[PLANE_PRIMARY] = _FW_WM(tmp, PLANEA);
tmp = I915_READ(DSPFW2);
wm->fbc_en = tmp & DSPFW_FBC_SR_EN;
wm->sr.fbc = _FW_WM(tmp, FBC_SR);
wm->hpll.fbc = _FW_WM(tmp, FBC_HPLL_SR);
wm->pipe[PIPE_B].plane[PLANE_SPRITE0] = _FW_WM(tmp, SPRITEB);
wm->pipe[PIPE_A].plane[PLANE_CURSOR] = _FW_WM(tmp, CURSORA);
wm->pipe[PIPE_A].plane[PLANE_SPRITE0] = _FW_WM(tmp, SPRITEA);
tmp = I915_READ(DSPFW3);
wm->hpll_en = tmp & DSPFW_HPLL_SR_EN;
wm->sr.cursor = _FW_WM(tmp, CURSOR_SR);
wm->hpll.cursor = _FW_WM(tmp, HPLL_CURSOR);
wm->hpll.plane = _FW_WM(tmp, HPLL_SR);
}
static void vlv_read_wm_values(struct drm_i915_private *dev_priv,
struct vlv_wm_values *wm)
{
enum pipe pipe;
uint32_t tmp;
for_each_pipe(dev_priv, pipe) {
tmp = I915_READ(VLV_DDL(pipe));
wm->ddl[pipe].plane[PLANE_PRIMARY] =
(tmp >> DDL_PLANE_SHIFT) & (DDL_PRECISION_HIGH | DRAIN_LATENCY_MASK);
wm->ddl[pipe].plane[PLANE_CURSOR] =
(tmp >> DDL_CURSOR_SHIFT) & (DDL_PRECISION_HIGH | DRAIN_LATENCY_MASK);
wm->ddl[pipe].plane[PLANE_SPRITE0] =
(tmp >> DDL_SPRITE_SHIFT(0)) & (DDL_PRECISION_HIGH | DRAIN_LATENCY_MASK);
wm->ddl[pipe].plane[PLANE_SPRITE1] =
(tmp >> DDL_SPRITE_SHIFT(1)) & (DDL_PRECISION_HIGH | DRAIN_LATENCY_MASK);
}
tmp = I915_READ(DSPFW1);
wm->sr.plane = _FW_WM(tmp, SR);
wm->pipe[PIPE_B].plane[PLANE_CURSOR] = _FW_WM(tmp, CURSORB);
wm->pipe[PIPE_B].plane[PLANE_PRIMARY] = _FW_WM_VLV(tmp, PLANEB);
wm->pipe[PIPE_A].plane[PLANE_PRIMARY] = _FW_WM_VLV(tmp, PLANEA);
tmp = I915_READ(DSPFW2);
wm->pipe[PIPE_A].plane[PLANE_SPRITE1] = _FW_WM_VLV(tmp, SPRITEB);
wm->pipe[PIPE_A].plane[PLANE_CURSOR] = _FW_WM(tmp, CURSORA);
wm->pipe[PIPE_A].plane[PLANE_SPRITE0] = _FW_WM_VLV(tmp, SPRITEA);
tmp = I915_READ(DSPFW3);
wm->sr.cursor = _FW_WM(tmp, CURSOR_SR);
if (IS_CHERRYVIEW(dev_priv)) {
tmp = I915_READ(DSPFW7_CHV);
wm->pipe[PIPE_B].plane[PLANE_SPRITE1] = _FW_WM_VLV(tmp, SPRITED);
wm->pipe[PIPE_B].plane[PLANE_SPRITE0] = _FW_WM_VLV(tmp, SPRITEC);
tmp = I915_READ(DSPFW8_CHV);
wm->pipe[PIPE_C].plane[PLANE_SPRITE1] = _FW_WM_VLV(tmp, SPRITEF);
wm->pipe[PIPE_C].plane[PLANE_SPRITE0] = _FW_WM_VLV(tmp, SPRITEE);
tmp = I915_READ(DSPFW9_CHV);
wm->pipe[PIPE_C].plane[PLANE_PRIMARY] = _FW_WM_VLV(tmp, PLANEC);
wm->pipe[PIPE_C].plane[PLANE_CURSOR] = _FW_WM(tmp, CURSORC);
tmp = I915_READ(DSPHOWM);
wm->sr.plane |= _FW_WM(tmp, SR_HI) << 9;
wm->pipe[PIPE_C].plane[PLANE_SPRITE1] |= _FW_WM(tmp, SPRITEF_HI) << 8;
wm->pipe[PIPE_C].plane[PLANE_SPRITE0] |= _FW_WM(tmp, SPRITEE_HI) << 8;
wm->pipe[PIPE_C].plane[PLANE_PRIMARY] |= _FW_WM(tmp, PLANEC_HI) << 8;
wm->pipe[PIPE_B].plane[PLANE_SPRITE1] |= _FW_WM(tmp, SPRITED_HI) << 8;
wm->pipe[PIPE_B].plane[PLANE_SPRITE0] |= _FW_WM(tmp, SPRITEC_HI) << 8;
wm->pipe[PIPE_B].plane[PLANE_PRIMARY] |= _FW_WM(tmp, PLANEB_HI) << 8;
wm->pipe[PIPE_A].plane[PLANE_SPRITE1] |= _FW_WM(tmp, SPRITEB_HI) << 8;
wm->pipe[PIPE_A].plane[PLANE_SPRITE0] |= _FW_WM(tmp, SPRITEA_HI) << 8;
wm->pipe[PIPE_A].plane[PLANE_PRIMARY] |= _FW_WM(tmp, PLANEA_HI) << 8;
} else {
tmp = I915_READ(DSPFW7);
wm->pipe[PIPE_B].plane[PLANE_SPRITE1] = _FW_WM_VLV(tmp, SPRITED);
wm->pipe[PIPE_B].plane[PLANE_SPRITE0] = _FW_WM_VLV(tmp, SPRITEC);
tmp = I915_READ(DSPHOWM);
wm->sr.plane |= _FW_WM(tmp, SR_HI) << 9;
wm->pipe[PIPE_B].plane[PLANE_SPRITE1] |= _FW_WM(tmp, SPRITED_HI) << 8;
wm->pipe[PIPE_B].plane[PLANE_SPRITE0] |= _FW_WM(tmp, SPRITEC_HI) << 8;
wm->pipe[PIPE_B].plane[PLANE_PRIMARY] |= _FW_WM(tmp, PLANEB_HI) << 8;
wm->pipe[PIPE_A].plane[PLANE_SPRITE1] |= _FW_WM(tmp, SPRITEB_HI) << 8;
wm->pipe[PIPE_A].plane[PLANE_SPRITE0] |= _FW_WM(tmp, SPRITEA_HI) << 8;
wm->pipe[PIPE_A].plane[PLANE_PRIMARY] |= _FW_WM(tmp, PLANEA_HI) << 8;
}
}
#undef _FW_WM
#undef _FW_WM_VLV
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
void g4x_wm_get_hw_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct g4x_wm_values *wm = &dev_priv->wm.g4x;
struct intel_crtc *crtc;
g4x_read_wm_values(dev_priv, wm);
wm->cxsr = I915_READ(FW_BLC_SELF) & FW_BLC_SELF_EN;
for_each_intel_crtc(dev, crtc) {
struct intel_crtc_state *crtc_state =
to_intel_crtc_state(crtc->base.state);
struct g4x_wm_state *active = &crtc->wm.active.g4x;
struct g4x_pipe_wm *raw;
enum pipe pipe = crtc->pipe;
enum plane_id plane_id;
int level, max_level;
active->cxsr = wm->cxsr;
active->hpll_en = wm->hpll_en;
active->fbc_en = wm->fbc_en;
active->sr = wm->sr;
active->hpll = wm->hpll;
for_each_plane_id_on_crtc(crtc, plane_id) {
active->wm.plane[plane_id] =
wm->pipe[pipe].plane[plane_id];
}
if (wm->cxsr && wm->hpll_en)
max_level = G4X_WM_LEVEL_HPLL;
else if (wm->cxsr)
max_level = G4X_WM_LEVEL_SR;
else
max_level = G4X_WM_LEVEL_NORMAL;
level = G4X_WM_LEVEL_NORMAL;
raw = &crtc_state->wm.g4x.raw[level];
for_each_plane_id_on_crtc(crtc, plane_id)
raw->plane[plane_id] = active->wm.plane[plane_id];
if (++level > max_level)
goto out;
raw = &crtc_state->wm.g4x.raw[level];
raw->plane[PLANE_PRIMARY] = active->sr.plane;
raw->plane[PLANE_CURSOR] = active->sr.cursor;
raw->plane[PLANE_SPRITE0] = 0;
raw->fbc = active->sr.fbc;
if (++level > max_level)
goto out;
raw = &crtc_state->wm.g4x.raw[level];
raw->plane[PLANE_PRIMARY] = active->hpll.plane;
raw->plane[PLANE_CURSOR] = active->hpll.cursor;
raw->plane[PLANE_SPRITE0] = 0;
raw->fbc = active->hpll.fbc;
out:
for_each_plane_id_on_crtc(crtc, plane_id)
g4x_raw_plane_wm_set(crtc_state, level,
plane_id, USHRT_MAX);
g4x_raw_fbc_wm_set(crtc_state, level, USHRT_MAX);
crtc_state->wm.g4x.optimal = *active;
crtc_state->wm.g4x.intermediate = *active;
DRM_DEBUG_KMS("Initial watermarks: pipe %c, plane=%d, cursor=%d, sprite=%d\n",
pipe_name(pipe),
wm->pipe[pipe].plane[PLANE_PRIMARY],
wm->pipe[pipe].plane[PLANE_CURSOR],
wm->pipe[pipe].plane[PLANE_SPRITE0]);
}
DRM_DEBUG_KMS("Initial SR watermarks: plane=%d, cursor=%d fbc=%d\n",
wm->sr.plane, wm->sr.cursor, wm->sr.fbc);
DRM_DEBUG_KMS("Initial HPLL watermarks: plane=%d, SR cursor=%d fbc=%d\n",
wm->hpll.plane, wm->hpll.cursor, wm->hpll.fbc);
DRM_DEBUG_KMS("Initial SR=%s HPLL=%s FBC=%s\n",
yesno(wm->cxsr), yesno(wm->hpll_en), yesno(wm->fbc_en));
}
void g4x_wm_sanitize(struct drm_i915_private *dev_priv)
{
struct intel_plane *plane;
struct intel_crtc *crtc;
mutex_lock(&dev_priv->wm.wm_mutex);
for_each_intel_plane(&dev_priv->drm, plane) {
struct intel_crtc *crtc =
intel_get_crtc_for_pipe(dev_priv, plane->pipe);
struct intel_crtc_state *crtc_state =
to_intel_crtc_state(crtc->base.state);
struct intel_plane_state *plane_state =
to_intel_plane_state(plane->base.state);
struct g4x_wm_state *wm_state = &crtc_state->wm.g4x.optimal;
enum plane_id plane_id = plane->id;
int level;
if (plane_state->base.visible)
continue;
for (level = 0; level < 3; level++) {
struct g4x_pipe_wm *raw =
&crtc_state->wm.g4x.raw[level];
raw->plane[plane_id] = 0;
wm_state->wm.plane[plane_id] = 0;
}
if (plane_id == PLANE_PRIMARY) {
for (level = 0; level < 3; level++) {
struct g4x_pipe_wm *raw =
&crtc_state->wm.g4x.raw[level];
raw->fbc = 0;
}
wm_state->sr.fbc = 0;
wm_state->hpll.fbc = 0;
wm_state->fbc_en = false;
}
}
for_each_intel_crtc(&dev_priv->drm, crtc) {
struct intel_crtc_state *crtc_state =
to_intel_crtc_state(crtc->base.state);
crtc_state->wm.g4x.intermediate =
crtc_state->wm.g4x.optimal;
crtc->wm.active.g4x = crtc_state->wm.g4x.optimal;
}
g4x_program_watermarks(dev_priv);
mutex_unlock(&dev_priv->wm.wm_mutex);
}
void vlv_wm_get_hw_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct vlv_wm_values *wm = &dev_priv->wm.vlv;
struct intel_crtc *crtc;
u32 val;
vlv_read_wm_values(dev_priv, wm);
wm->cxsr = I915_READ(FW_BLC_SELF_VLV) & FW_CSPWRDWNEN;
wm->level = VLV_WM_LEVEL_PM2;
if (IS_CHERRYVIEW(dev_priv)) {
mutex_lock(&dev_priv->pcu_lock);
val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
if (val & DSP_MAXFIFO_PM5_ENABLE)
wm->level = VLV_WM_LEVEL_PM5;
/*
* If DDR DVFS is disabled in the BIOS, Punit
* will never ack the request. So if that happens
* assume we don't have to enable/disable DDR DVFS
* dynamically. To test that just set the REQ_ACK
* bit to poke the Punit, but don't change the
* HIGH/LOW bits so that we don't actually change
* the current state.
*/
val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2);
val |= FORCE_DDR_FREQ_REQ_ACK;
vlv_punit_write(dev_priv, PUNIT_REG_DDR_SETUP2, val);
if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2) &
FORCE_DDR_FREQ_REQ_ACK) == 0, 3)) {
DRM_DEBUG_KMS("Punit not acking DDR DVFS request, "
"assuming DDR DVFS is disabled\n");
dev_priv->wm.max_level = VLV_WM_LEVEL_PM5;
} else {
val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2);
if ((val & FORCE_DDR_HIGH_FREQ) == 0)
wm->level = VLV_WM_LEVEL_DDR_DVFS;
}
mutex_unlock(&dev_priv->pcu_lock);
}
for_each_intel_crtc(dev, crtc) {
struct intel_crtc_state *crtc_state =
to_intel_crtc_state(crtc->base.state);
struct vlv_wm_state *active = &crtc->wm.active.vlv;
const struct vlv_fifo_state *fifo_state =
&crtc_state->wm.vlv.fifo_state;
enum pipe pipe = crtc->pipe;
enum plane_id plane_id;
int level;
vlv_get_fifo_size(crtc_state);
active->num_levels = wm->level + 1;
active->cxsr = wm->cxsr;
for (level = 0; level < active->num_levels; level++) {
struct g4x_pipe_wm *raw =
&crtc_state->wm.vlv.raw[level];
active->sr[level].plane = wm->sr.plane;
active->sr[level].cursor = wm->sr.cursor;
for_each_plane_id_on_crtc(crtc, plane_id) {
active->wm[level].plane[plane_id] =
wm->pipe[pipe].plane[plane_id];
raw->plane[plane_id] =
vlv_invert_wm_value(active->wm[level].plane[plane_id],
fifo_state->plane[plane_id]);
}
}
for_each_plane_id_on_crtc(crtc, plane_id)
vlv_raw_plane_wm_set(crtc_state, level,
plane_id, USHRT_MAX);
vlv_invalidate_wms(crtc, active, level);
crtc_state->wm.vlv.optimal = *active;
crtc_state->wm.vlv.intermediate = *active;
DRM_DEBUG_KMS("Initial watermarks: pipe %c, plane=%d, cursor=%d, sprite0=%d, sprite1=%d\n",
pipe_name(pipe),
wm->pipe[pipe].plane[PLANE_PRIMARY],
wm->pipe[pipe].plane[PLANE_CURSOR],
wm->pipe[pipe].plane[PLANE_SPRITE0],
wm->pipe[pipe].plane[PLANE_SPRITE1]);
}
DRM_DEBUG_KMS("Initial watermarks: SR plane=%d, SR cursor=%d level=%d cxsr=%d\n",
wm->sr.plane, wm->sr.cursor, wm->level, wm->cxsr);
}
void vlv_wm_sanitize(struct drm_i915_private *dev_priv)
{
struct intel_plane *plane;
struct intel_crtc *crtc;
mutex_lock(&dev_priv->wm.wm_mutex);
for_each_intel_plane(&dev_priv->drm, plane) {
struct intel_crtc *crtc =
intel_get_crtc_for_pipe(dev_priv, plane->pipe);
struct intel_crtc_state *crtc_state =
to_intel_crtc_state(crtc->base.state);
struct intel_plane_state *plane_state =
to_intel_plane_state(plane->base.state);
struct vlv_wm_state *wm_state = &crtc_state->wm.vlv.optimal;
const struct vlv_fifo_state *fifo_state =
&crtc_state->wm.vlv.fifo_state;
enum plane_id plane_id = plane->id;
int level;
if (plane_state->base.visible)
continue;
for (level = 0; level < wm_state->num_levels; level++) {
struct g4x_pipe_wm *raw =
&crtc_state->wm.vlv.raw[level];
raw->plane[plane_id] = 0;
wm_state->wm[level].plane[plane_id] =
vlv_invert_wm_value(raw->plane[plane_id],
fifo_state->plane[plane_id]);
}
}
for_each_intel_crtc(&dev_priv->drm, crtc) {
struct intel_crtc_state *crtc_state =
to_intel_crtc_state(crtc->base.state);
crtc_state->wm.vlv.intermediate =
crtc_state->wm.vlv.optimal;
crtc->wm.active.vlv = crtc_state->wm.vlv.optimal;
}
vlv_program_watermarks(dev_priv);
mutex_unlock(&dev_priv->wm.wm_mutex);
}
drm/i915: Move init_clock_gating() back to where it was Apparently setting up a bunch of GT registers before we've properly initialized the rest of the GT hardware leads to these setting being lost. So looks like I broke HSW with commit b7048ea12fbb ("drm/i915: Do .init_clock_gating() earlier to avoid it clobbering watermarks") by doing init_clock_gating() too early. This should actually affect other platforms as well, but apparently not to such a great degree. What I was ultimately after in that commit was to move the ilk_init_lp_watermarks() call earlier. So let's undo the damage and move init_clock_gating() back to where it was, and call ilk_init_lp_watermarks() just before the watermark state readout. This highlights how fragile and messed up our init order really is. I wonder why we even initialize the display before gem. The opposite order would make much more sense to me... v2: Keep WaRsPkgCStateDisplayPMReq:hsw early as it really must be done before all planes might get disabled. Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mark Janes <mark.a.janes@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reported-by: Mark Janes <mark.a.janes@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103549 Fixes: b7048ea12fbb ("drm/i915: Do .init_clock_gating() earlier to avoid it clobbering watermarks") References: https://lists.freedesktop.org/archives/intel-gfx/2017-November/145432.html Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171108133555.14091-1-ville.syrjala@linux.intel.com Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-11-08 06:35:55 -07:00
/*
* FIXME should probably kill this and improve
* the real watermark readout/sanitation instead
*/
static void ilk_init_lp_watermarks(struct drm_i915_private *dev_priv)
{
I915_WRITE(WM3_LP_ILK, I915_READ(WM3_LP_ILK) & ~WM1_LP_SR_EN);
I915_WRITE(WM2_LP_ILK, I915_READ(WM2_LP_ILK) & ~WM1_LP_SR_EN);
I915_WRITE(WM1_LP_ILK, I915_READ(WM1_LP_ILK) & ~WM1_LP_SR_EN);
/*
* Don't touch WM1S_LP_EN here.
* Doing so could cause underruns.
*/
}
void ilk_wm_get_hw_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct ilk_wm_values *hw = &dev_priv->wm.hw;
struct drm_crtc *crtc;
drm/i915: Move init_clock_gating() back to where it was Apparently setting up a bunch of GT registers before we've properly initialized the rest of the GT hardware leads to these setting being lost. So looks like I broke HSW with commit b7048ea12fbb ("drm/i915: Do .init_clock_gating() earlier to avoid it clobbering watermarks") by doing init_clock_gating() too early. This should actually affect other platforms as well, but apparently not to such a great degree. What I was ultimately after in that commit was to move the ilk_init_lp_watermarks() call earlier. So let's undo the damage and move init_clock_gating() back to where it was, and call ilk_init_lp_watermarks() just before the watermark state readout. This highlights how fragile and messed up our init order really is. I wonder why we even initialize the display before gem. The opposite order would make much more sense to me... v2: Keep WaRsPkgCStateDisplayPMReq:hsw early as it really must be done before all planes might get disabled. Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mark Janes <mark.a.janes@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reported-by: Mark Janes <mark.a.janes@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103549 Fixes: b7048ea12fbb ("drm/i915: Do .init_clock_gating() earlier to avoid it clobbering watermarks") References: https://lists.freedesktop.org/archives/intel-gfx/2017-November/145432.html Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171108133555.14091-1-ville.syrjala@linux.intel.com Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-11-08 06:35:55 -07:00
ilk_init_lp_watermarks(dev_priv);
for_each_crtc(dev, crtc)
ilk_pipe_wm_get_hw_state(crtc);
hw->wm_lp[0] = I915_READ(WM1_LP_ILK);
hw->wm_lp[1] = I915_READ(WM2_LP_ILK);
hw->wm_lp[2] = I915_READ(WM3_LP_ILK);
hw->wm_lp_spr[0] = I915_READ(WM1S_LP_ILK);
if (INTEL_GEN(dev_priv) >= 7) {
hw->wm_lp_spr[1] = I915_READ(WM2S_LP_IVB);
hw->wm_lp_spr[2] = I915_READ(WM3S_LP_IVB);
}
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
hw->partitioning = (I915_READ(WM_MISC) & WM_MISC_DATA_PARTITION_5_6) ?
INTEL_DDB_PART_5_6 : INTEL_DDB_PART_1_2;
else if (IS_IVYBRIDGE(dev_priv))
hw->partitioning = (I915_READ(DISP_ARB_CTL2) & DISP_DATA_PARTITION_5_6) ?
INTEL_DDB_PART_5_6 : INTEL_DDB_PART_1_2;
hw->enable_fbc_wm =
!(I915_READ(DISP_ARB_CTL) & DISP_FBC_WM_DIS);
}
/**
* intel_update_watermarks - update FIFO watermark values based on current modes
* @crtc: the #intel_crtc on which to compute the WM
*
* Calculate watermark values for the various WM regs based on current mode
* and plane configuration.
*
* There are several cases to deal with here:
* - normal (i.e. non-self-refresh)
* - self-refresh (SR) mode
* - lines are large relative to FIFO size (buffer can hold up to 2)
* - lines are small relative to FIFO size (buffer can hold more than 2
* lines), so need to account for TLB latency
*
* The normal calculation is:
* watermark = dotclock * bytes per pixel * latency
* where latency is platform & configuration dependent (we assume pessimal
* values here).
*
* The SR calculation is:
* watermark = (trunc(latency/line time)+1) * surface width *
* bytes per pixel
* where
* line time = htotal / dotclock
* surface width = hdisplay for normal plane and 64 for cursor
* and latency is assumed to be high, as above.
*
* The final value programmed to the register should always be rounded up,
* and include an extra 2 entries to account for clock crossings.
*
* We don't use the sprite, so we can ignore that. And on Crestline we have
* to set the non-SR watermarks to 8.
*/
void intel_update_watermarks(struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
if (dev_priv->display.update_wm)
dev_priv->display.update_wm(crtc);
}
2017-08-17 07:45:28 -06:00
void intel_enable_ipc(struct drm_i915_private *dev_priv)
{
u32 val;
if (!HAS_IPC(dev_priv))
return;
2017-08-17 07:45:28 -06:00
val = I915_READ(DISP_ARB_CTL2);
if (dev_priv->ipc_enabled)
val |= DISP_IPC_ENABLE;
else
val &= ~DISP_IPC_ENABLE;
I915_WRITE(DISP_ARB_CTL2, val);
}
void intel_init_ipc(struct drm_i915_private *dev_priv)
{
if (!HAS_IPC(dev_priv))
return;
/* Display WA #1141: SKL:all KBL:all CFL */
if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv))
dev_priv->ipc_enabled = dev_priv->dram_info.symmetric_memory;
else
dev_priv->ipc_enabled = true;
2017-08-17 07:45:28 -06:00
intel_enable_ipc(dev_priv);
}
/*
* Lock protecting IPS related data structures
*/
DEFINE_SPINLOCK(mchdev_lock);
/* Global for IPS driver to get at the current i915 device. Protected by
* mchdev_lock. */
static struct drm_i915_private *i915_mch_dev;
drm/i915: Small display interrupt handlers tidy I have noticed some of our interrupt handlers use both dev and dev_priv while they could get away with only dev_priv in the huge majority of cases. Tidying that up had a cascading effect on changing functions prototypes, so relatively big churn factor, but I think it is for the better. For example even where changes cascade out of i915_irq.c, for functions prefixed with intel_, genX_ or <plat>_, it makes more sense to take dev_priv directly anyway. This allows us to eliminate local variables and intermixed usage of dev and dev_priv where only one is good enough. End result is shrinkage of both source and the resulting binary. i915.ko: - .text 000b0899 + .text 000b0619 Or if we look at the Gen8 display irq chain: -00000000000006ad t gen8_irq_handler +0000000000000663 t gen8_irq_handler -0000000000000028 T intel_opregion_asle_intr +0000000000000024 T intel_opregion_asle_intr -000000000000008c t ilk_hpd_irq_handler +000000000000007f t ilk_hpd_irq_handler -0000000000000116 T intel_check_page_flip +0000000000000112 T intel_check_page_flip -000000000000011a T intel_prepare_page_flip +0000000000000119 T intel_prepare_page_flip -0000000000000014 T intel_finish_page_flip_plane +0000000000000013 T intel_finish_page_flip_plane -0000000000000053 t hsw_pipe_crc_irq_handler +000000000000004c t hsw_pipe_crc_irq_handler -000000000000022e t cpt_irq_handler +0000000000000213 t cpt_irq_handler So small shrinkage but it is all fast paths so doesn't harm. Situation is similar in other interrupt handlers as well. v2: Tidy intel_queue_rps_boost_for_request as well. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-05-06 07:48:28 -06:00
bool ironlake_set_drps(struct drm_i915_private *dev_priv, u8 val)
{
u16 rgvswctl;
lockdep_assert_held(&mchdev_lock);
rgvswctl = I915_READ16(MEMSWCTL);
if (rgvswctl & MEMCTL_CMD_STS) {
DRM_DEBUG("gpu busy, RCS change rejected\n");
return false; /* still busy with another command */
}
rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
(val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
I915_WRITE16(MEMSWCTL, rgvswctl);
POSTING_READ16(MEMSWCTL);
rgvswctl |= MEMCTL_CMD_STS;
I915_WRITE16(MEMSWCTL, rgvswctl);
return true;
}
drm/i915: Small display interrupt handlers tidy I have noticed some of our interrupt handlers use both dev and dev_priv while they could get away with only dev_priv in the huge majority of cases. Tidying that up had a cascading effect on changing functions prototypes, so relatively big churn factor, but I think it is for the better. For example even where changes cascade out of i915_irq.c, for functions prefixed with intel_, genX_ or <plat>_, it makes more sense to take dev_priv directly anyway. This allows us to eliminate local variables and intermixed usage of dev and dev_priv where only one is good enough. End result is shrinkage of both source and the resulting binary. i915.ko: - .text 000b0899 + .text 000b0619 Or if we look at the Gen8 display irq chain: -00000000000006ad t gen8_irq_handler +0000000000000663 t gen8_irq_handler -0000000000000028 T intel_opregion_asle_intr +0000000000000024 T intel_opregion_asle_intr -000000000000008c t ilk_hpd_irq_handler +000000000000007f t ilk_hpd_irq_handler -0000000000000116 T intel_check_page_flip +0000000000000112 T intel_check_page_flip -000000000000011a T intel_prepare_page_flip +0000000000000119 T intel_prepare_page_flip -0000000000000014 T intel_finish_page_flip_plane +0000000000000013 T intel_finish_page_flip_plane -0000000000000053 t hsw_pipe_crc_irq_handler +000000000000004c t hsw_pipe_crc_irq_handler -000000000000022e t cpt_irq_handler +0000000000000213 t cpt_irq_handler So small shrinkage but it is all fast paths so doesn't harm. Situation is similar in other interrupt handlers as well. v2: Tidy intel_queue_rps_boost_for_request as well. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-05-06 07:48:28 -06:00
static void ironlake_enable_drps(struct drm_i915_private *dev_priv)
{
u32 rgvmodectl;
u8 fmax, fmin, fstart, vstart;
spin_lock_irq(&mchdev_lock);
rgvmodectl = I915_READ(MEMMODECTL);
/* Enable temp reporting */
I915_WRITE16(PMMISC, I915_READ(PMMISC) | MCPPCE_EN);
I915_WRITE16(TSC1, I915_READ(TSC1) | TSE);
/* 100ms RC evaluation intervals */
I915_WRITE(RCUPEI, 100000);
I915_WRITE(RCDNEI, 100000);
/* Set max/min thresholds to 90ms and 80ms respectively */
I915_WRITE(RCBMAXAVG, 90000);
I915_WRITE(RCBMINAVG, 80000);
I915_WRITE(MEMIHYST, 1);
/* Set up min, max, and cur for interrupt handling */
fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT;
fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
MEMMODE_FSTART_SHIFT;
vstart = (I915_READ(PXVFREQ(fstart)) & PXVFREQ_PX_MASK) >>
PXVFREQ_PX_SHIFT;
dev_priv->ips.fmax = fmax; /* IPS callback will increase this */
dev_priv->ips.fstart = fstart;
dev_priv->ips.max_delay = fstart;
dev_priv->ips.min_delay = fmin;
dev_priv->ips.cur_delay = fstart;
DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
fmax, fmin, fstart);
I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
/*
* Interrupts will be enabled in ironlake_irq_postinstall
*/
I915_WRITE(VIDSTART, vstart);
POSTING_READ(VIDSTART);
rgvmodectl |= MEMMODE_SWMODE_EN;
I915_WRITE(MEMMODECTL, rgvmodectl);
if (wait_for_atomic((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10))
DRM_ERROR("stuck trying to change perf mode\n");
mdelay(1);
drm/i915: Small display interrupt handlers tidy I have noticed some of our interrupt handlers use both dev and dev_priv while they could get away with only dev_priv in the huge majority of cases. Tidying that up had a cascading effect on changing functions prototypes, so relatively big churn factor, but I think it is for the better. For example even where changes cascade out of i915_irq.c, for functions prefixed with intel_, genX_ or <plat>_, it makes more sense to take dev_priv directly anyway. This allows us to eliminate local variables and intermixed usage of dev and dev_priv where only one is good enough. End result is shrinkage of both source and the resulting binary. i915.ko: - .text 000b0899 + .text 000b0619 Or if we look at the Gen8 display irq chain: -00000000000006ad t gen8_irq_handler +0000000000000663 t gen8_irq_handler -0000000000000028 T intel_opregion_asle_intr +0000000000000024 T intel_opregion_asle_intr -000000000000008c t ilk_hpd_irq_handler +000000000000007f t ilk_hpd_irq_handler -0000000000000116 T intel_check_page_flip +0000000000000112 T intel_check_page_flip -000000000000011a T intel_prepare_page_flip +0000000000000119 T intel_prepare_page_flip -0000000000000014 T intel_finish_page_flip_plane +0000000000000013 T intel_finish_page_flip_plane -0000000000000053 t hsw_pipe_crc_irq_handler +000000000000004c t hsw_pipe_crc_irq_handler -000000000000022e t cpt_irq_handler +0000000000000213 t cpt_irq_handler So small shrinkage but it is all fast paths so doesn't harm. Situation is similar in other interrupt handlers as well. v2: Tidy intel_queue_rps_boost_for_request as well. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-05-06 07:48:28 -06:00
ironlake_set_drps(dev_priv, fstart);
dev_priv->ips.last_count1 = I915_READ(DMIEC) +
I915_READ(DDREC) + I915_READ(CSIEC);
dev_priv->ips.last_time1 = jiffies_to_msecs(jiffies);
dev_priv->ips.last_count2 = I915_READ(GFXEC);
dev_priv->ips.last_time2 = ktime_get_raw_ns();
spin_unlock_irq(&mchdev_lock);
}
drm/i915: Small display interrupt handlers tidy I have noticed some of our interrupt handlers use both dev and dev_priv while they could get away with only dev_priv in the huge majority of cases. Tidying that up had a cascading effect on changing functions prototypes, so relatively big churn factor, but I think it is for the better. For example even where changes cascade out of i915_irq.c, for functions prefixed with intel_, genX_ or <plat>_, it makes more sense to take dev_priv directly anyway. This allows us to eliminate local variables and intermixed usage of dev and dev_priv where only one is good enough. End result is shrinkage of both source and the resulting binary. i915.ko: - .text 000b0899 + .text 000b0619 Or if we look at the Gen8 display irq chain: -00000000000006ad t gen8_irq_handler +0000000000000663 t gen8_irq_handler -0000000000000028 T intel_opregion_asle_intr +0000000000000024 T intel_opregion_asle_intr -000000000000008c t ilk_hpd_irq_handler +000000000000007f t ilk_hpd_irq_handler -0000000000000116 T intel_check_page_flip +0000000000000112 T intel_check_page_flip -000000000000011a T intel_prepare_page_flip +0000000000000119 T intel_prepare_page_flip -0000000000000014 T intel_finish_page_flip_plane +0000000000000013 T intel_finish_page_flip_plane -0000000000000053 t hsw_pipe_crc_irq_handler +000000000000004c t hsw_pipe_crc_irq_handler -000000000000022e t cpt_irq_handler +0000000000000213 t cpt_irq_handler So small shrinkage but it is all fast paths so doesn't harm. Situation is similar in other interrupt handlers as well. v2: Tidy intel_queue_rps_boost_for_request as well. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-05-06 07:48:28 -06:00
static void ironlake_disable_drps(struct drm_i915_private *dev_priv)
{
u16 rgvswctl;
spin_lock_irq(&mchdev_lock);
rgvswctl = I915_READ16(MEMSWCTL);
/* Ack interrupts, disable EFC interrupt */
I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN);
I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG);
I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT);
I915_WRITE(DEIIR, DE_PCU_EVENT);
I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT);
/* Go back to the starting frequency */
drm/i915: Small display interrupt handlers tidy I have noticed some of our interrupt handlers use both dev and dev_priv while they could get away with only dev_priv in the huge majority of cases. Tidying that up had a cascading effect on changing functions prototypes, so relatively big churn factor, but I think it is for the better. For example even where changes cascade out of i915_irq.c, for functions prefixed with intel_, genX_ or <plat>_, it makes more sense to take dev_priv directly anyway. This allows us to eliminate local variables and intermixed usage of dev and dev_priv where only one is good enough. End result is shrinkage of both source and the resulting binary. i915.ko: - .text 000b0899 + .text 000b0619 Or if we look at the Gen8 display irq chain: -00000000000006ad t gen8_irq_handler +0000000000000663 t gen8_irq_handler -0000000000000028 T intel_opregion_asle_intr +0000000000000024 T intel_opregion_asle_intr -000000000000008c t ilk_hpd_irq_handler +000000000000007f t ilk_hpd_irq_handler -0000000000000116 T intel_check_page_flip +0000000000000112 T intel_check_page_flip -000000000000011a T intel_prepare_page_flip +0000000000000119 T intel_prepare_page_flip -0000000000000014 T intel_finish_page_flip_plane +0000000000000013 T intel_finish_page_flip_plane -0000000000000053 t hsw_pipe_crc_irq_handler +000000000000004c t hsw_pipe_crc_irq_handler -000000000000022e t cpt_irq_handler +0000000000000213 t cpt_irq_handler So small shrinkage but it is all fast paths so doesn't harm. Situation is similar in other interrupt handlers as well. v2: Tidy intel_queue_rps_boost_for_request as well. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-05-06 07:48:28 -06:00
ironlake_set_drps(dev_priv, dev_priv->ips.fstart);
mdelay(1);
rgvswctl |= MEMCTL_CMD_STS;
I915_WRITE(MEMSWCTL, rgvswctl);
mdelay(1);
spin_unlock_irq(&mchdev_lock);
}
/* There's a funny hw issue where the hw returns all 0 when reading from
* GEN6_RP_INTERRUPT_LIMITS. Hence we always need to compute the desired value
* ourselves, instead of doing a rmw cycle (which might result in us clearing
* all limits and the gpu stuck at whatever frequency it is at atm).
*/
static u32 intel_rps_limits(struct drm_i915_private *dev_priv, u8 val)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
u32 limits;
/* Only set the down limit when we've reached the lowest level to avoid
* getting more interrupts, otherwise leave this clear. This prevents a
* race in the hw when coming out of rc6: There's a tiny window where
* the hw runs at the minimal clock before selecting the desired
* frequency, if the down threshold expires in that window we will not
* receive a down interrupt. */
if (INTEL_GEN(dev_priv) >= 9) {
limits = (rps->max_freq_softlimit) << 23;
if (val <= rps->min_freq_softlimit)
limits |= (rps->min_freq_softlimit) << 14;
} else {
limits = rps->max_freq_softlimit << 24;
if (val <= rps->min_freq_softlimit)
limits |= rps->min_freq_softlimit << 16;
}
return limits;
}
drm/i915: Interactive RPS mode RPS provides a feedback loop where we use the load during the previous evaluation interval to decide whether to up or down clock the GPU frequency. Our responsiveness is split into 3 regimes, a high and low plateau with the intent to keep the gpu clocked high to cover occasional stalls under high load, and low despite occasional glitches under steady low load, and inbetween. However, we run into situations like kodi where we want to stay at low power (video decoding is done efficiently inside the fixed function HW and doesn't need high clocks even for high bitrate streams), but just occasionally the pipeline is more complex than a video decode and we need a smidgen of extra GPU power to present on time. In the high power regime, we sample at sub frame intervals with a bias to upclocking, and conversely at low power we sample over a few frames worth to provide what we consider to be the right levels of responsiveness respectively. At low power, we more or less expect to be kicked out to high power at the start of a busy sequence by waitboosting. Prior to commit e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request") whenever we missed the frame or stalled, we would immediate go full throttle and upclock the GPU to max. But in commit e9af4ea2b9e7, we relaxed the waitboosting to only apply if the pipeline was deep to avoid over-committing resources for a near miss. Sadly though, a near miss is still a miss, and perceptible as jitter in the frame delivery. To try and prevent the near miss before having to resort to boosting after the fact, we use the pageflip queue as an indication that we are in an "interactive" regime and so should sample the load more frequently to provide power before the frame misses it vblank. This will make us more favorable to providing a small power increase (one or two bins) as required rather than going all the way to maximum and then having to work back down again. (We still keep the waitboosting mechanism around just in case a dramatic change in system load requires urgent uplocking, faster than we can provide in a few evaluation intervals.) v2: Reduce rps_set_interactive to a boolean parameter to avoid the confusion of what if they wanted a new power mode after pinning to a different mode (which to choose?) v3: Only reprogram RPS while the GT is awake, it will be set when we wake the GT, and while off warns about being used outside of rpm. v4: Fix deferred application of interactive mode v5: s/state/interactive/ v6: Group the mutex with its principle in a substruct Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107111 Fixes: e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180731132629.3381-1-chris@chris-wilson.co.uk
2018-07-31 07:26:29 -06:00
static void rps_set_power(struct drm_i915_private *dev_priv, int new_power)
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 10:34:57 -06:00
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
u32 threshold_up = 0, threshold_down = 0; /* in % */
u32 ei_up = 0, ei_down = 0;
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 10:34:57 -06:00
drm/i915: Interactive RPS mode RPS provides a feedback loop where we use the load during the previous evaluation interval to decide whether to up or down clock the GPU frequency. Our responsiveness is split into 3 regimes, a high and low plateau with the intent to keep the gpu clocked high to cover occasional stalls under high load, and low despite occasional glitches under steady low load, and inbetween. However, we run into situations like kodi where we want to stay at low power (video decoding is done efficiently inside the fixed function HW and doesn't need high clocks even for high bitrate streams), but just occasionally the pipeline is more complex than a video decode and we need a smidgen of extra GPU power to present on time. In the high power regime, we sample at sub frame intervals with a bias to upclocking, and conversely at low power we sample over a few frames worth to provide what we consider to be the right levels of responsiveness respectively. At low power, we more or less expect to be kicked out to high power at the start of a busy sequence by waitboosting. Prior to commit e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request") whenever we missed the frame or stalled, we would immediate go full throttle and upclock the GPU to max. But in commit e9af4ea2b9e7, we relaxed the waitboosting to only apply if the pipeline was deep to avoid over-committing resources for a near miss. Sadly though, a near miss is still a miss, and perceptible as jitter in the frame delivery. To try and prevent the near miss before having to resort to boosting after the fact, we use the pageflip queue as an indication that we are in an "interactive" regime and so should sample the load more frequently to provide power before the frame misses it vblank. This will make us more favorable to providing a small power increase (one or two bins) as required rather than going all the way to maximum and then having to work back down again. (We still keep the waitboosting mechanism around just in case a dramatic change in system load requires urgent uplocking, faster than we can provide in a few evaluation intervals.) v2: Reduce rps_set_interactive to a boolean parameter to avoid the confusion of what if they wanted a new power mode after pinning to a different mode (which to choose?) v3: Only reprogram RPS while the GT is awake, it will be set when we wake the GT, and while off warns about being used outside of rpm. v4: Fix deferred application of interactive mode v5: s/state/interactive/ v6: Group the mutex with its principle in a substruct Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107111 Fixes: e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180731132629.3381-1-chris@chris-wilson.co.uk
2018-07-31 07:26:29 -06:00
lockdep_assert_held(&rps->power.mutex);
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 10:34:57 -06:00
drm/i915: Interactive RPS mode RPS provides a feedback loop where we use the load during the previous evaluation interval to decide whether to up or down clock the GPU frequency. Our responsiveness is split into 3 regimes, a high and low plateau with the intent to keep the gpu clocked high to cover occasional stalls under high load, and low despite occasional glitches under steady low load, and inbetween. However, we run into situations like kodi where we want to stay at low power (video decoding is done efficiently inside the fixed function HW and doesn't need high clocks even for high bitrate streams), but just occasionally the pipeline is more complex than a video decode and we need a smidgen of extra GPU power to present on time. In the high power regime, we sample at sub frame intervals with a bias to upclocking, and conversely at low power we sample over a few frames worth to provide what we consider to be the right levels of responsiveness respectively. At low power, we more or less expect to be kicked out to high power at the start of a busy sequence by waitboosting. Prior to commit e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request") whenever we missed the frame or stalled, we would immediate go full throttle and upclock the GPU to max. But in commit e9af4ea2b9e7, we relaxed the waitboosting to only apply if the pipeline was deep to avoid over-committing resources for a near miss. Sadly though, a near miss is still a miss, and perceptible as jitter in the frame delivery. To try and prevent the near miss before having to resort to boosting after the fact, we use the pageflip queue as an indication that we are in an "interactive" regime and so should sample the load more frequently to provide power before the frame misses it vblank. This will make us more favorable to providing a small power increase (one or two bins) as required rather than going all the way to maximum and then having to work back down again. (We still keep the waitboosting mechanism around just in case a dramatic change in system load requires urgent uplocking, faster than we can provide in a few evaluation intervals.) v2: Reduce rps_set_interactive to a boolean parameter to avoid the confusion of what if they wanted a new power mode after pinning to a different mode (which to choose?) v3: Only reprogram RPS while the GT is awake, it will be set when we wake the GT, and while off warns about being used outside of rpm. v4: Fix deferred application of interactive mode v5: s/state/interactive/ v6: Group the mutex with its principle in a substruct Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107111 Fixes: e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180731132629.3381-1-chris@chris-wilson.co.uk
2018-07-31 07:26:29 -06:00
if (new_power == rps->power.mode)
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 10:34:57 -06:00
return;
/* Note the units here are not exactly 1us, but 1280ns. */
switch (new_power) {
case LOW_POWER:
/* Upclock if more than 95% busy over 16ms */
ei_up = 16000;
threshold_up = 95;
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 10:34:57 -06:00
/* Downclock if less than 85% busy over 32ms */
ei_down = 32000;
threshold_down = 85;
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 10:34:57 -06:00
break;
case BETWEEN:
/* Upclock if more than 90% busy over 13ms */
ei_up = 13000;
threshold_up = 90;
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 10:34:57 -06:00
/* Downclock if less than 75% busy over 32ms */
ei_down = 32000;
threshold_down = 75;
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 10:34:57 -06:00
break;
case HIGH_POWER:
/* Upclock if more than 85% busy over 10ms */
ei_up = 10000;
threshold_up = 85;
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 10:34:57 -06:00
/* Downclock if less than 60% busy over 32ms */
ei_down = 32000;
threshold_down = 60;
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 10:34:57 -06:00
break;
}
drm/i915: Avoid tweaking evaluation thresholds on Baytrail v3 Certain Baytrails, namely the 4 cpu core variants, have been plaqued by spurious system hangs, mostly occurring with light loads. Multiple bisects by various people point to a commit which changes the reclocking strategy for Baytrail to follow its bigger brethen: commit 8fb55197e64d ("drm/i915: Agressive downclocking on Baytrail") There is also a review comment attached to this commit from Deepak S on avoiding punit access on Cherryview and thus it was excluded on common reclocking path. By taking the same approach and omitting the punit access by not tweaking the thresholds when the hardware has been asked to move into different frequency, considerable gains in stability have been observed. With J1900 box, light render/video load would end up in system hang in usually less than 12 hours. With this patch applied, the cumulative uptime has now been 34 days without issues. To provoke system hang, light loads on both render and bsd engines in parallel have been used: glxgears >/dev/null 2>/dev/null & mpv --vo=vaapi --hwdec=vaapi --loop=inf vid.mp4 So far, author has not witnessed system hang with above load and this patch applied. Reports from the tenacious people at kernel bugzilla are also promising. Considering that the punit access frequency with this patch is considerably less, there is a possibility that this will push the, still unknown, root cause past the triggering point on most loads. But as we now can reliably reproduce the hang independently, we can reduce the pain that users are having and use a static thresholds until a root cause is found. v3: don't break debugfs and simplification (Chris Wilson) References: https://bugzilla.kernel.org/show_bug.cgi?id=109051 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Cc: fritsch@xbmc.org Cc: miku@iki.fi Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> CC: Michal Feix <michal@feix.cz> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Deepak S <deepak.s@linux.intel.com> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.2+ Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487166779-26945-1-git-send-email-mika.kuoppala@intel.com
2017-02-15 06:52:59 -07:00
/* When byt can survive without system hang with dynamic
* sw freq adjustments, this restriction can be lifted.
*/
if (IS_VALLEYVIEW(dev_priv))
goto skip_hw_write;
I915_WRITE(GEN6_RP_UP_EI,
GT_INTERVAL_FROM_US(dev_priv, ei_up));
I915_WRITE(GEN6_RP_UP_THRESHOLD,
GT_INTERVAL_FROM_US(dev_priv,
ei_up * threshold_up / 100));
I915_WRITE(GEN6_RP_DOWN_EI,
GT_INTERVAL_FROM_US(dev_priv, ei_down));
I915_WRITE(GEN6_RP_DOWN_THRESHOLD,
GT_INTERVAL_FROM_US(dev_priv,
ei_down * threshold_down / 100));
I915_WRITE(GEN6_RP_CONTROL,
GEN6_RP_MEDIA_TURBO |
GEN6_RP_MEDIA_HW_NORMAL_MODE |
GEN6_RP_MEDIA_IS_GFX |
GEN6_RP_ENABLE |
GEN6_RP_UP_BUSY_AVG |
GEN6_RP_DOWN_IDLE_AVG);
drm/i915: Avoid tweaking evaluation thresholds on Baytrail v3 Certain Baytrails, namely the 4 cpu core variants, have been plaqued by spurious system hangs, mostly occurring with light loads. Multiple bisects by various people point to a commit which changes the reclocking strategy for Baytrail to follow its bigger brethen: commit 8fb55197e64d ("drm/i915: Agressive downclocking on Baytrail") There is also a review comment attached to this commit from Deepak S on avoiding punit access on Cherryview and thus it was excluded on common reclocking path. By taking the same approach and omitting the punit access by not tweaking the thresholds when the hardware has been asked to move into different frequency, considerable gains in stability have been observed. With J1900 box, light render/video load would end up in system hang in usually less than 12 hours. With this patch applied, the cumulative uptime has now been 34 days without issues. To provoke system hang, light loads on both render and bsd engines in parallel have been used: glxgears >/dev/null 2>/dev/null & mpv --vo=vaapi --hwdec=vaapi --loop=inf vid.mp4 So far, author has not witnessed system hang with above load and this patch applied. Reports from the tenacious people at kernel bugzilla are also promising. Considering that the punit access frequency with this patch is considerably less, there is a possibility that this will push the, still unknown, root cause past the triggering point on most loads. But as we now can reliably reproduce the hang independently, we can reduce the pain that users are having and use a static thresholds until a root cause is found. v3: don't break debugfs and simplification (Chris Wilson) References: https://bugzilla.kernel.org/show_bug.cgi?id=109051 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Cc: fritsch@xbmc.org Cc: miku@iki.fi Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> CC: Michal Feix <michal@feix.cz> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Deepak S <deepak.s@linux.intel.com> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.2+ Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487166779-26945-1-git-send-email-mika.kuoppala@intel.com
2017-02-15 06:52:59 -07:00
skip_hw_write:
drm/i915: Interactive RPS mode RPS provides a feedback loop where we use the load during the previous evaluation interval to decide whether to up or down clock the GPU frequency. Our responsiveness is split into 3 regimes, a high and low plateau with the intent to keep the gpu clocked high to cover occasional stalls under high load, and low despite occasional glitches under steady low load, and inbetween. However, we run into situations like kodi where we want to stay at low power (video decoding is done efficiently inside the fixed function HW and doesn't need high clocks even for high bitrate streams), but just occasionally the pipeline is more complex than a video decode and we need a smidgen of extra GPU power to present on time. In the high power regime, we sample at sub frame intervals with a bias to upclocking, and conversely at low power we sample over a few frames worth to provide what we consider to be the right levels of responsiveness respectively. At low power, we more or less expect to be kicked out to high power at the start of a busy sequence by waitboosting. Prior to commit e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request") whenever we missed the frame or stalled, we would immediate go full throttle and upclock the GPU to max. But in commit e9af4ea2b9e7, we relaxed the waitboosting to only apply if the pipeline was deep to avoid over-committing resources for a near miss. Sadly though, a near miss is still a miss, and perceptible as jitter in the frame delivery. To try and prevent the near miss before having to resort to boosting after the fact, we use the pageflip queue as an indication that we are in an "interactive" regime and so should sample the load more frequently to provide power before the frame misses it vblank. This will make us more favorable to providing a small power increase (one or two bins) as required rather than going all the way to maximum and then having to work back down again. (We still keep the waitboosting mechanism around just in case a dramatic change in system load requires urgent uplocking, faster than we can provide in a few evaluation intervals.) v2: Reduce rps_set_interactive to a boolean parameter to avoid the confusion of what if they wanted a new power mode after pinning to a different mode (which to choose?) v3: Only reprogram RPS while the GT is awake, it will be set when we wake the GT, and while off warns about being used outside of rpm. v4: Fix deferred application of interactive mode v5: s/state/interactive/ v6: Group the mutex with its principle in a substruct Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107111 Fixes: e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180731132629.3381-1-chris@chris-wilson.co.uk
2018-07-31 07:26:29 -06:00
rps->power.mode = new_power;
rps->power.up_threshold = threshold_up;
rps->power.down_threshold = threshold_down;
}
static void gen6_set_rps_thresholds(struct drm_i915_private *dev_priv, u8 val)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
int new_power;
new_power = rps->power.mode;
switch (rps->power.mode) {
case LOW_POWER:
if (val > rps->efficient_freq + 1 &&
val > rps->cur_freq)
new_power = BETWEEN;
break;
case BETWEEN:
if (val <= rps->efficient_freq &&
val < rps->cur_freq)
new_power = LOW_POWER;
else if (val >= rps->rp0_freq &&
val > rps->cur_freq)
new_power = HIGH_POWER;
break;
case HIGH_POWER:
if (val < (rps->rp1_freq + rps->rp0_freq) >> 1 &&
val < rps->cur_freq)
new_power = BETWEEN;
break;
}
/* Max/min bins are special */
if (val <= rps->min_freq_softlimit)
new_power = LOW_POWER;
if (val >= rps->max_freq_softlimit)
new_power = HIGH_POWER;
mutex_lock(&rps->power.mutex);
if (rps->power.interactive)
new_power = HIGH_POWER;
rps_set_power(dev_priv, new_power);
mutex_unlock(&rps->power.mutex);
drm/i915: Tweak RPS thresholds to more aggressively downclock After applying wait-boost we often find ourselves stuck at higher clocks than required. The current threshold value requires the GPU to be continuously and completely idle for 313ms before it is dropped by one bin. Conversely, we require the GPU to be busy for an average of 90% over a 84ms period before we upclock. So the current thresholds almost never downclock the GPU, and respond very slowly to sudden demands for more power. It is easy to observe that we currently lock into the wrong bin and both underperform in benchmarks and consume more power than optimal (just by repeating the task and measuring the different results). An alternative approach, as discussed in the bspec, is to use a continuous threshold for upclocking, and an average value for downclocking. This is good for quickly detecting and reacting to state changes within a frame, however it fails with the common throttling method of waiting upon the outstanding frame - at least it is difficult to choose a threshold that works well at 15,000fps and at 60fps. So continue to use average busy/idle loads to determine frequency change. v2: Use 3 power zones to keep frequencies low in steady-state mostly idle (e.g. scrolling, interactive 2D drawing), and frequencies high for demanding games. In between those end-states, we use a fast-reclocking algorithm to converge more quickly on the desired bin. v3: Bug fixes - make sure we reset adj after switching power zones. v4: Tune - drop the continuous busy thresholds as it prevents us from choosing the right frequency for glxgears style swap benchmarks. Instead the goal is to be able to find the right clocks irrespective of the wait-boost. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 10:34:57 -06:00
}
drm/i915: Interactive RPS mode RPS provides a feedback loop where we use the load during the previous evaluation interval to decide whether to up or down clock the GPU frequency. Our responsiveness is split into 3 regimes, a high and low plateau with the intent to keep the gpu clocked high to cover occasional stalls under high load, and low despite occasional glitches under steady low load, and inbetween. However, we run into situations like kodi where we want to stay at low power (video decoding is done efficiently inside the fixed function HW and doesn't need high clocks even for high bitrate streams), but just occasionally the pipeline is more complex than a video decode and we need a smidgen of extra GPU power to present on time. In the high power regime, we sample at sub frame intervals with a bias to upclocking, and conversely at low power we sample over a few frames worth to provide what we consider to be the right levels of responsiveness respectively. At low power, we more or less expect to be kicked out to high power at the start of a busy sequence by waitboosting. Prior to commit e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request") whenever we missed the frame or stalled, we would immediate go full throttle and upclock the GPU to max. But in commit e9af4ea2b9e7, we relaxed the waitboosting to only apply if the pipeline was deep to avoid over-committing resources for a near miss. Sadly though, a near miss is still a miss, and perceptible as jitter in the frame delivery. To try and prevent the near miss before having to resort to boosting after the fact, we use the pageflip queue as an indication that we are in an "interactive" regime and so should sample the load more frequently to provide power before the frame misses it vblank. This will make us more favorable to providing a small power increase (one or two bins) as required rather than going all the way to maximum and then having to work back down again. (We still keep the waitboosting mechanism around just in case a dramatic change in system load requires urgent uplocking, faster than we can provide in a few evaluation intervals.) v2: Reduce rps_set_interactive to a boolean parameter to avoid the confusion of what if they wanted a new power mode after pinning to a different mode (which to choose?) v3: Only reprogram RPS while the GT is awake, it will be set when we wake the GT, and while off warns about being used outside of rpm. v4: Fix deferred application of interactive mode v5: s/state/interactive/ v6: Group the mutex with its principle in a substruct Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107111 Fixes: e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180731132629.3381-1-chris@chris-wilson.co.uk
2018-07-31 07:26:29 -06:00
void intel_rps_mark_interactive(struct drm_i915_private *i915, bool interactive)
{
struct intel_rps *rps = &i915->gt_pm.rps;
if (INTEL_GEN(i915) < 6)
return;
mutex_lock(&rps->power.mutex);
if (interactive) {
if (!rps->power.interactive++ && READ_ONCE(i915->gt.awake))
rps_set_power(i915, HIGH_POWER);
} else {
GEM_BUG_ON(!rps->power.interactive);
rps->power.interactive--;
}
mutex_unlock(&rps->power.mutex);
}
static u32 gen6_rps_pm_mask(struct drm_i915_private *dev_priv, u8 val)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
u32 mask = 0;
/* We use UP_EI_EXPIRED interupts for both up/down in manual mode */
if (val > rps->min_freq_softlimit)
mask |= GEN6_PM_RP_UP_EI_EXPIRED | GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_DOWN_TIMEOUT;
if (val < rps->max_freq_softlimit)
mask |= GEN6_PM_RP_UP_EI_EXPIRED | GEN6_PM_RP_UP_THRESHOLD;
mask &= dev_priv->pm_rps_events;
return gen6_sanitize_rps_pm_mask(dev_priv, ~mask);
}
/* gen6_set_rps is called to update the frequency request, but should also be
* called when the range (min_delay and max_delay) is modified so that we can
* update the GEN6_RP_INTERRUPT_LIMITS register accordingly. */
static int gen6_set_rps(struct drm_i915_private *dev_priv, u8 val)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
/* min/max delay may still have been modified so be sure to
* write the limits value.
*/
if (val != rps->cur_freq) {
gen6_set_rps_thresholds(dev_priv, val);
if (INTEL_GEN(dev_priv) >= 9)
I915_WRITE(GEN6_RPNSWREQ,
GEN9_FREQUENCY(val));
else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
I915_WRITE(GEN6_RPNSWREQ,
HSW_FREQUENCY(val));
else
I915_WRITE(GEN6_RPNSWREQ,
GEN6_FREQUENCY(val) |
GEN6_OFFSET(0) |
GEN6_AGGRESSIVE_TURBO);
}
/* Make sure we continue to get interrupts
* until we hit the minimum or maximum frequencies.
*/
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, intel_rps_limits(dev_priv, val));
I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val));
rps->cur_freq = val;
trace_intel_gpu_freq_change(intel_gpu_freq(dev_priv, val));
return 0;
}
static int valleyview_set_rps(struct drm_i915_private *dev_priv, u8 val)
{
int err;
if (WARN_ONCE(IS_CHERRYVIEW(dev_priv) && (val & 1),
"Odd GPU freq value\n"))
val &= ~1;
I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val));
if (val != dev_priv->gt_pm.rps.cur_freq) {
err = vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val);
if (err)
return err;
gen6_set_rps_thresholds(dev_priv, val);
}
dev_priv->gt_pm.rps.cur_freq = val;
trace_intel_gpu_freq_change(intel_gpu_freq(dev_priv, val));
return 0;
}
/* vlv_set_rps_idle: Set the frequency to idle, if Gfx clocks are down
*
* * If Gfx is Idle, then
* 1. Forcewake Media well.
* 2. Request idle freq.
* 3. Release Forcewake of Media well.
*/
static void vlv_set_rps_idle(struct drm_i915_private *dev_priv)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
u32 val = rps->idle_freq;
int err;
if (rps->cur_freq <= val)
return;
/* The punit delays the write of the frequency and voltage until it
* determines the GPU is awake. During normal usage we don't want to
* waste power changing the frequency if the GPU is sleeping (rc6).
* However, the GPU and driver is now idle and we do not want to delay
* switching to minimum voltage (reducing power whilst idle) as we do
* not expect to be woken in the near future and so must flush the
* change by waking the device.
*
* We choose to take the media powerwell (either would do to trick the
* punit into committing the voltage change) as that takes a lot less
* power than the render powerwell.
*/
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_MEDIA);
err = valleyview_set_rps(dev_priv, val);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_MEDIA);
if (err)
DRM_ERROR("Failed to set RPS for idle\n");
}
void gen6_rps_busy(struct drm_i915_private *dev_priv)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
mutex_lock(&dev_priv->pcu_lock);
if (rps->enabled) {
u8 freq;
if (dev_priv->pm_rps_events & GEN6_PM_RP_UP_EI_EXPIRED)
gen6_rps_reset_ei(dev_priv);
I915_WRITE(GEN6_PMINTRMSK,
gen6_rps_pm_mask(dev_priv, rps->cur_freq));
gen6_enable_rps_interrupts(dev_priv);
/* Use the user's desired frequency as a guide, but for better
* performance, jump directly to RPe as our starting frequency.
*/
freq = max(rps->cur_freq,
rps->efficient_freq);
if (intel_set_rps(dev_priv,
clamp(freq,
rps->min_freq_softlimit,
rps->max_freq_softlimit)))
DRM_DEBUG_DRIVER("Failed to set idle frequency\n");
}
mutex_unlock(&dev_priv->pcu_lock);
}
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 10:34:56 -06:00
void gen6_rps_idle(struct drm_i915_private *dev_priv)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
/* Flush our bottom-half so that it does not race with us
* setting the idle frequency and so that it is bounded by
* our rpm wakeref. And then disable the interrupts to stop any
* futher RPS reclocking whilst we are asleep.
*/
gen6_disable_rps_interrupts(dev_priv);
mutex_lock(&dev_priv->pcu_lock);
if (rps->enabled) {
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
vlv_set_rps_idle(dev_priv);
else
gen6_set_rps(dev_priv, rps->idle_freq);
rps->last_adj = 0;
I915_WRITE(GEN6_PMINTRMSK,
gen6_sanitize_rps_pm_mask(dev_priv, ~0));
}
mutex_unlock(&dev_priv->pcu_lock);
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 10:34:56 -06:00
}
void gen6_rps_boost(struct i915_request *rq,
struct intel_rps_client *rps_client)
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 10:34:56 -06:00
{
struct intel_rps *rps = &rq->i915->gt_pm.rps;
drm/i915: Boost GPU clocks if we miss the pageflip's vblank If we miss the current vblank because the gpu was busy, that may cause a jitter as the frame rate temporarily drops. We try to limit the impact of this by then boosting the GPU clock to deliver the frame as quickly as possible. Originally done in commit 6ad790c0f5ac ("drm/i915: Boost GPU frequency if we detect outstanding pageflips") but was never forward ported to atomic and finally dropped in commit fd3a40242e87 ("drm/i915: Rip out legacy page_flip completion/irq handling"). One of the most typical use-cases for this is a mostly idle desktop. Rendering one frame of the desktop's frontbuffer can easily be accomplished by the GPU running at low frequency, but often exceeds the time budget of the desktop compositor. The result is that animations such as opening the menu, doing a fullscreen switch, or even just trying to move a window around are slow and jerky. We need to respond within a frame to give the best impression of a smooth UX, as a compromise we instead respond if that first frame misses its goal. The result should be a near-imperceivable initial delay and a smooth animation even starting from idle. The cost, as ever, is that we spend more power than is strictly necessary as we overestimate the required GPU frequency and then try to ramp down. This of course is reactionary, too little, too late; nevertheless it is surprisingly effective. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102199 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170817123706.6777-1-chris@chris-wilson.co.uk Tested-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
2017-08-17 06:37:06 -06:00
unsigned long flags;
drm/i915: Avoid keeping waitboost active for signaling threads Once a client has requested a waitboost, we keep that waitboost active until all clients are no longer waiting. This is because we don't distinguish which waiter deserves the boost. However, with the advent of fence signaling, the signaler threads appear as waiters to the RPS interrupt handler. So instead of using a single boolean to track when to keep the waitboost active, use a counter of all outstanding waitboosted requests. At this point, I have removed all vestiges of the rate limiting on clients. Whilst this means that compositors should remain more fluid, it also means that boosts are more prevalent. See commit b29c19b64528 ("drm/i915: Boost RPS frequency for CPU stalls") for a longer discussion on the pros and cons of both approaches. A drawback of this implementation is that it requires constant request submission to keep the waitboost trimmed (as it is now cancelled when the request is completed). This will be fine for a busy system, but near idle the boosts may be kept for longer than desired (effectively tens of vblanks worstcase) and there is a reliance on rc6 instead. v2: Remove defunct rps.client_lock Reported-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170628123548.9236-1-chris@chris-wilson.co.uk
2017-06-28 06:35:48 -06:00
bool boost;
/* This is intentionally racy! We peek at the state here, then
* validate inside the RPS worker.
*/
if (!rps->enabled)
return;
if (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT, &rq->fence.flags))
return;
/* Serializes with i915_request_retire() */
drm/i915: Avoid keeping waitboost active for signaling threads Once a client has requested a waitboost, we keep that waitboost active until all clients are no longer waiting. This is because we don't distinguish which waiter deserves the boost. However, with the advent of fence signaling, the signaler threads appear as waiters to the RPS interrupt handler. So instead of using a single boolean to track when to keep the waitboost active, use a counter of all outstanding waitboosted requests. At this point, I have removed all vestiges of the rate limiting on clients. Whilst this means that compositors should remain more fluid, it also means that boosts are more prevalent. See commit b29c19b64528 ("drm/i915: Boost RPS frequency for CPU stalls") for a longer discussion on the pros and cons of both approaches. A drawback of this implementation is that it requires constant request submission to keep the waitboost trimmed (as it is now cancelled when the request is completed). This will be fine for a busy system, but near idle the boosts may be kept for longer than desired (effectively tens of vblanks worstcase) and there is a reliance on rc6 instead. v2: Remove defunct rps.client_lock Reported-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170628123548.9236-1-chris@chris-wilson.co.uk
2017-06-28 06:35:48 -06:00
boost = false;
drm/i915: Boost GPU clocks if we miss the pageflip's vblank If we miss the current vblank because the gpu was busy, that may cause a jitter as the frame rate temporarily drops. We try to limit the impact of this by then boosting the GPU clock to deliver the frame as quickly as possible. Originally done in commit 6ad790c0f5ac ("drm/i915: Boost GPU frequency if we detect outstanding pageflips") but was never forward ported to atomic and finally dropped in commit fd3a40242e87 ("drm/i915: Rip out legacy page_flip completion/irq handling"). One of the most typical use-cases for this is a mostly idle desktop. Rendering one frame of the desktop's frontbuffer can easily be accomplished by the GPU running at low frequency, but often exceeds the time budget of the desktop compositor. The result is that animations such as opening the menu, doing a fullscreen switch, or even just trying to move a window around are slow and jerky. We need to respond within a frame to give the best impression of a smooth UX, as a compromise we instead respond if that first frame misses its goal. The result should be a near-imperceivable initial delay and a smooth animation even starting from idle. The cost, as ever, is that we spend more power than is strictly necessary as we overestimate the required GPU frequency and then try to ramp down. This of course is reactionary, too little, too late; nevertheless it is surprisingly effective. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102199 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170817123706.6777-1-chris@chris-wilson.co.uk Tested-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
2017-08-17 06:37:06 -06:00
spin_lock_irqsave(&rq->lock, flags);
if (!rq->waitboost && !dma_fence_is_signaled_locked(&rq->fence)) {
boost = !atomic_fetch_inc(&rps->num_waiters);
drm/i915: Avoid keeping waitboost active for signaling threads Once a client has requested a waitboost, we keep that waitboost active until all clients are no longer waiting. This is because we don't distinguish which waiter deserves the boost. However, with the advent of fence signaling, the signaler threads appear as waiters to the RPS interrupt handler. So instead of using a single boolean to track when to keep the waitboost active, use a counter of all outstanding waitboosted requests. At this point, I have removed all vestiges of the rate limiting on clients. Whilst this means that compositors should remain more fluid, it also means that boosts are more prevalent. See commit b29c19b64528 ("drm/i915: Boost RPS frequency for CPU stalls") for a longer discussion on the pros and cons of both approaches. A drawback of this implementation is that it requires constant request submission to keep the waitboost trimmed (as it is now cancelled when the request is completed). This will be fine for a busy system, but near idle the boosts may be kept for longer than desired (effectively tens of vblanks worstcase) and there is a reliance on rc6 instead. v2: Remove defunct rps.client_lock Reported-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170628123548.9236-1-chris@chris-wilson.co.uk
2017-06-28 06:35:48 -06:00
rq->waitboost = true;
}
drm/i915: Boost GPU clocks if we miss the pageflip's vblank If we miss the current vblank because the gpu was busy, that may cause a jitter as the frame rate temporarily drops. We try to limit the impact of this by then boosting the GPU clock to deliver the frame as quickly as possible. Originally done in commit 6ad790c0f5ac ("drm/i915: Boost GPU frequency if we detect outstanding pageflips") but was never forward ported to atomic and finally dropped in commit fd3a40242e87 ("drm/i915: Rip out legacy page_flip completion/irq handling"). One of the most typical use-cases for this is a mostly idle desktop. Rendering one frame of the desktop's frontbuffer can easily be accomplished by the GPU running at low frequency, but often exceeds the time budget of the desktop compositor. The result is that animations such as opening the menu, doing a fullscreen switch, or even just trying to move a window around are slow and jerky. We need to respond within a frame to give the best impression of a smooth UX, as a compromise we instead respond if that first frame misses its goal. The result should be a near-imperceivable initial delay and a smooth animation even starting from idle. The cost, as ever, is that we spend more power than is strictly necessary as we overestimate the required GPU frequency and then try to ramp down. This of course is reactionary, too little, too late; nevertheless it is surprisingly effective. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102199 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170817123706.6777-1-chris@chris-wilson.co.uk Tested-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
2017-08-17 06:37:06 -06:00
spin_unlock_irqrestore(&rq->lock, flags);
drm/i915: Avoid keeping waitboost active for signaling threads Once a client has requested a waitboost, we keep that waitboost active until all clients are no longer waiting. This is because we don't distinguish which waiter deserves the boost. However, with the advent of fence signaling, the signaler threads appear as waiters to the RPS interrupt handler. So instead of using a single boolean to track when to keep the waitboost active, use a counter of all outstanding waitboosted requests. At this point, I have removed all vestiges of the rate limiting on clients. Whilst this means that compositors should remain more fluid, it also means that boosts are more prevalent. See commit b29c19b64528 ("drm/i915: Boost RPS frequency for CPU stalls") for a longer discussion on the pros and cons of both approaches. A drawback of this implementation is that it requires constant request submission to keep the waitboost trimmed (as it is now cancelled when the request is completed). This will be fine for a busy system, but near idle the boosts may be kept for longer than desired (effectively tens of vblanks worstcase) and there is a reliance on rc6 instead. v2: Remove defunct rps.client_lock Reported-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170628123548.9236-1-chris@chris-wilson.co.uk
2017-06-28 06:35:48 -06:00
if (!boost)
return;
if (READ_ONCE(rps->cur_freq) < rps->boost_freq)
schedule_work(&rps->work);
drm/i915: Avoid keeping waitboost active for signaling threads Once a client has requested a waitboost, we keep that waitboost active until all clients are no longer waiting. This is because we don't distinguish which waiter deserves the boost. However, with the advent of fence signaling, the signaler threads appear as waiters to the RPS interrupt handler. So instead of using a single boolean to track when to keep the waitboost active, use a counter of all outstanding waitboosted requests. At this point, I have removed all vestiges of the rate limiting on clients. Whilst this means that compositors should remain more fluid, it also means that boosts are more prevalent. See commit b29c19b64528 ("drm/i915: Boost RPS frequency for CPU stalls") for a longer discussion on the pros and cons of both approaches. A drawback of this implementation is that it requires constant request submission to keep the waitboost trimmed (as it is now cancelled when the request is completed). This will be fine for a busy system, but near idle the boosts may be kept for longer than desired (effectively tens of vblanks worstcase) and there is a reliance on rc6 instead. v2: Remove defunct rps.client_lock Reported-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170628123548.9236-1-chris@chris-wilson.co.uk
2017-06-28 06:35:48 -06:00
atomic_inc(rps_client ? &rps_client->boosts : &rps->boosts);
drm/i915: Boost RPS frequency for CPU stalls If we encounter a situation where the CPU blocks waiting for results from the GPU, give the GPU a kick to boost its the frequency. This should work to reduce user interface stalls and to quickly promote mesa to high frequencies - but the cost is that our requested frequency stalls high (as we do not idle for long enough before rc6 to start reducing frequencies, nor are we aggressive at down clocking an underused GPU). However, this should be mitigated by rc6 itself powering off the GPU when idle, and that energy use is dependent upon the workload of the GPU in addition to its frequency (e.g. the math or sampler functions only consume power when used). Still, this is likely to adversely affect light workloads. In particular, this nearly eliminates the highly noticeable wake-up lag in animations from idle. For example, expose or workspace transitions. (However, given the situation where we fail to downclock, our requested frequency is almost always the maximum, except for Baytrail where we manually downclock upon idling. This often masks the latency of upclocking after being idle, so animations are typically smooth - at the cost of increased power consumption.) Stéphane raised the concern that this will punish good applications and reward bad applications - but due to the nature of how mesa performs its client throttling, I believe all mesa applications will be roughly equally affected. To address this concern, and to prevent applications like compositors from permanently boosting the RPS state, we ratelimit the frequency of the wait-boosts each client recieves. Unfortunately, this techinique is ineffective with Ironlake - which also has dynamic render power states and suffers just as dramatically. For Ironlake, the thermal/power headroom is shared with the CPU through Intelligent Power Sharing and the intel-ips module. This leaves us with no GPU boost frequencies available when coming out of idle, and due to hardware limitations we cannot change the arbitration between the CPU and GPU quickly enough to be effective. v2: Limit each client to receiving a single boost for each active period. Tested by QA to only marginally increase power, and to demonstrably increase throughput in games. No latency measurements yet. v3: Cater for front-buffer rendering with manual throttling. v4: Tidy up. v5: Sadly the compositor needs frequent boosts as it may never idle, but due to its picking mechanism (using ReadPixels) may require frequent waits. Those waits, along with the waits for the vrefresh swap, conspire to keep the GPU at low frequencies despite the interactive latency. To overcome this we ditch the one-boost-per-active-period and just ratelimit the number of wait-boosts each client can receive. Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68716 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Stéphane Marchesin <stephane.marchesin@gmail.com> Cc: Owen Taylor <otaylor@redhat.com> Cc: "Meng, Mengmeng" <mengmeng.meng@intel.com> Cc: "Zhuang, Lena" <lena.zhuang@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: No extern for function prototypes in headers.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-25 10:34:56 -06:00
}
int intel_set_rps(struct drm_i915_private *dev_priv, u8 val)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
int err;
lockdep_assert_held(&dev_priv->pcu_lock);
GEM_BUG_ON(val > rps->max_freq);
GEM_BUG_ON(val < rps->min_freq);
if (!rps->enabled) {
rps->cur_freq = val;
return 0;
}
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
err = valleyview_set_rps(dev_priv, val);
else
err = gen6_set_rps(dev_priv, val);
return err;
}
static void gen9_disable_rc6(struct drm_i915_private *dev_priv)
{
I915_WRITE(GEN6_RC_CONTROL, 0);
I915_WRITE(GEN9_PG_ENABLE, 0);
}
static void gen9_disable_rps(struct drm_i915_private *dev_priv)
{
I915_WRITE(GEN6_RP_CONTROL, 0);
}
static void gen6_disable_rc6(struct drm_i915_private *dev_priv)
{
I915_WRITE(GEN6_RC_CONTROL, 0);
}
static void gen6_disable_rps(struct drm_i915_private *dev_priv)
{
I915_WRITE(GEN6_RPNSWREQ, 1 << 31);
I915_WRITE(GEN6_RP_CONTROL, 0);
}
static void cherryview_disable_rc6(struct drm_i915_private *dev_priv)
{
I915_WRITE(GEN6_RC_CONTROL, 0);
}
static void cherryview_disable_rps(struct drm_i915_private *dev_priv)
{
I915_WRITE(GEN6_RP_CONTROL, 0);
}
static void valleyview_disable_rc6(struct drm_i915_private *dev_priv)
{
/* We're doing forcewake before Disabling RC6,
* This what the BIOS expects when going into suspend */
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
I915_WRITE(GEN6_RC_CONTROL, 0);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void valleyview_disable_rps(struct drm_i915_private *dev_priv)
{
I915_WRITE(GEN6_RP_CONTROL, 0);
}
static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv)
drm/i915/bxt: Check BIOS RC6 setup before enabling RC6 RC6 setup is shared between BIOS and Driver. BIOS sets up subset of RC6 setup registers. If those are not setup Driver should not enable RC6. For implementing this, driver can check RC_CTRL0 and RC_CTRL1 values to know if BIOS has enabled HW/SW RC6. This will also enable user to control RC6 using BIOS settings alone. RC6 related instability can be avoided by disabling via BIOS settings till driver fixes it. v2: Had placed logic in gen8 function by mistake. Fixed it. Ensuring RPM is not enabled in case BIOS disabled RC6. v3: Need to disable RPM if RC6 is disabled due to BIOS settings. (Daniel) Runtime PM enabling happens before gen9_enable_rc6. Moved the updation of enable_rc6 parameter in intel_uncore_sanitize. v4: Added elaborate check for BIOS RC6 setup. Prepared check_pctx for bxt. (Imre) v5: Caching reserved stolen base and size in the driver private data. Reorganized RC6 setup check. Moved from gen9_enable_rc6 to intel_uncore_sanitize. (Imre) v6: Rebasing on the patch submitted by Imre that moves gem_init_stolen earlier in the load. v7: Removed PWRCTX_MAXCNT_VCSUNIT1 check as it applies to SKL. (Imre) v8: Fixed formatting and checkpatch issues. Fixed functional issue where RC6 ctx size check was missing. (Imre) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454697809-22113-1-git-send-email-sagar.a.kamble@intel.com
2016-02-05 11:43:29 -07:00
{
bool enable_rc6 = true;
unsigned long rc6_ctx_base;
u32 rc_ctl;
int rc_sw_target;
rc_ctl = I915_READ(GEN6_RC_CONTROL);
rc_sw_target = (I915_READ(GEN6_RC_STATE) & RC_SW_TARGET_STATE_MASK) >>
RC_SW_TARGET_STATE_SHIFT;
DRM_DEBUG_DRIVER("BIOS enabled RC states: "
"HW_CTRL %s HW_RC6 %s SW_TARGET_STATE %x\n",
onoff(rc_ctl & GEN6_RC_CTL_HW_ENABLE),
onoff(rc_ctl & GEN6_RC_CTL_RC6_ENABLE),
rc_sw_target);
drm/i915/bxt: Check BIOS RC6 setup before enabling RC6 RC6 setup is shared between BIOS and Driver. BIOS sets up subset of RC6 setup registers. If those are not setup Driver should not enable RC6. For implementing this, driver can check RC_CTRL0 and RC_CTRL1 values to know if BIOS has enabled HW/SW RC6. This will also enable user to control RC6 using BIOS settings alone. RC6 related instability can be avoided by disabling via BIOS settings till driver fixes it. v2: Had placed logic in gen8 function by mistake. Fixed it. Ensuring RPM is not enabled in case BIOS disabled RC6. v3: Need to disable RPM if RC6 is disabled due to BIOS settings. (Daniel) Runtime PM enabling happens before gen9_enable_rc6. Moved the updation of enable_rc6 parameter in intel_uncore_sanitize. v4: Added elaborate check for BIOS RC6 setup. Prepared check_pctx for bxt. (Imre) v5: Caching reserved stolen base and size in the driver private data. Reorganized RC6 setup check. Moved from gen9_enable_rc6 to intel_uncore_sanitize. (Imre) v6: Rebasing on the patch submitted by Imre that moves gem_init_stolen earlier in the load. v7: Removed PWRCTX_MAXCNT_VCSUNIT1 check as it applies to SKL. (Imre) v8: Fixed formatting and checkpatch issues. Fixed functional issue where RC6 ctx size check was missing. (Imre) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454697809-22113-1-git-send-email-sagar.a.kamble@intel.com
2016-02-05 11:43:29 -07:00
if (!(I915_READ(RC6_LOCATION) & RC6_CTX_IN_DRAM)) {
DRM_DEBUG_DRIVER("RC6 Base location not set properly.\n");
drm/i915/bxt: Check BIOS RC6 setup before enabling RC6 RC6 setup is shared between BIOS and Driver. BIOS sets up subset of RC6 setup registers. If those are not setup Driver should not enable RC6. For implementing this, driver can check RC_CTRL0 and RC_CTRL1 values to know if BIOS has enabled HW/SW RC6. This will also enable user to control RC6 using BIOS settings alone. RC6 related instability can be avoided by disabling via BIOS settings till driver fixes it. v2: Had placed logic in gen8 function by mistake. Fixed it. Ensuring RPM is not enabled in case BIOS disabled RC6. v3: Need to disable RPM if RC6 is disabled due to BIOS settings. (Daniel) Runtime PM enabling happens before gen9_enable_rc6. Moved the updation of enable_rc6 parameter in intel_uncore_sanitize. v4: Added elaborate check for BIOS RC6 setup. Prepared check_pctx for bxt. (Imre) v5: Caching reserved stolen base and size in the driver private data. Reorganized RC6 setup check. Moved from gen9_enable_rc6 to intel_uncore_sanitize. (Imre) v6: Rebasing on the patch submitted by Imre that moves gem_init_stolen earlier in the load. v7: Removed PWRCTX_MAXCNT_VCSUNIT1 check as it applies to SKL. (Imre) v8: Fixed formatting and checkpatch issues. Fixed functional issue where RC6 ctx size check was missing. (Imre) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454697809-22113-1-git-send-email-sagar.a.kamble@intel.com
2016-02-05 11:43:29 -07:00
enable_rc6 = false;
}
/*
* The exact context size is not known for BXT, so assume a page size
* for this check.
*/
rc6_ctx_base = I915_READ(RC6_CTX_BASE) & RC6_CTX_BASE_MASK;
if (!((rc6_ctx_base >= dev_priv->dsm_reserved.start) &&
(rc6_ctx_base + PAGE_SIZE < dev_priv->dsm_reserved.end))) {
DRM_DEBUG_DRIVER("RC6 Base address not as expected.\n");
drm/i915/bxt: Check BIOS RC6 setup before enabling RC6 RC6 setup is shared between BIOS and Driver. BIOS sets up subset of RC6 setup registers. If those are not setup Driver should not enable RC6. For implementing this, driver can check RC_CTRL0 and RC_CTRL1 values to know if BIOS has enabled HW/SW RC6. This will also enable user to control RC6 using BIOS settings alone. RC6 related instability can be avoided by disabling via BIOS settings till driver fixes it. v2: Had placed logic in gen8 function by mistake. Fixed it. Ensuring RPM is not enabled in case BIOS disabled RC6. v3: Need to disable RPM if RC6 is disabled due to BIOS settings. (Daniel) Runtime PM enabling happens before gen9_enable_rc6. Moved the updation of enable_rc6 parameter in intel_uncore_sanitize. v4: Added elaborate check for BIOS RC6 setup. Prepared check_pctx for bxt. (Imre) v5: Caching reserved stolen base and size in the driver private data. Reorganized RC6 setup check. Moved from gen9_enable_rc6 to intel_uncore_sanitize. (Imre) v6: Rebasing on the patch submitted by Imre that moves gem_init_stolen earlier in the load. v7: Removed PWRCTX_MAXCNT_VCSUNIT1 check as it applies to SKL. (Imre) v8: Fixed formatting and checkpatch issues. Fixed functional issue where RC6 ctx size check was missing. (Imre) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454697809-22113-1-git-send-email-sagar.a.kamble@intel.com
2016-02-05 11:43:29 -07:00
enable_rc6 = false;
}
if (!(((I915_READ(PWRCTX_MAXCNT_RCSUNIT) & IDLE_TIME_MASK) > 1) &&
((I915_READ(PWRCTX_MAXCNT_VCSUNIT0) & IDLE_TIME_MASK) > 1) &&
((I915_READ(PWRCTX_MAXCNT_BCSUNIT) & IDLE_TIME_MASK) > 1) &&
((I915_READ(PWRCTX_MAXCNT_VECSUNIT) & IDLE_TIME_MASK) > 1))) {
DRM_DEBUG_DRIVER("Engine Idle wait time not set properly.\n");
drm/i915/bxt: Check BIOS RC6 setup before enabling RC6 RC6 setup is shared between BIOS and Driver. BIOS sets up subset of RC6 setup registers. If those are not setup Driver should not enable RC6. For implementing this, driver can check RC_CTRL0 and RC_CTRL1 values to know if BIOS has enabled HW/SW RC6. This will also enable user to control RC6 using BIOS settings alone. RC6 related instability can be avoided by disabling via BIOS settings till driver fixes it. v2: Had placed logic in gen8 function by mistake. Fixed it. Ensuring RPM is not enabled in case BIOS disabled RC6. v3: Need to disable RPM if RC6 is disabled due to BIOS settings. (Daniel) Runtime PM enabling happens before gen9_enable_rc6. Moved the updation of enable_rc6 parameter in intel_uncore_sanitize. v4: Added elaborate check for BIOS RC6 setup. Prepared check_pctx for bxt. (Imre) v5: Caching reserved stolen base and size in the driver private data. Reorganized RC6 setup check. Moved from gen9_enable_rc6 to intel_uncore_sanitize. (Imre) v6: Rebasing on the patch submitted by Imre that moves gem_init_stolen earlier in the load. v7: Removed PWRCTX_MAXCNT_VCSUNIT1 check as it applies to SKL. (Imre) v8: Fixed formatting and checkpatch issues. Fixed functional issue where RC6 ctx size check was missing. (Imre) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454697809-22113-1-git-send-email-sagar.a.kamble@intel.com
2016-02-05 11:43:29 -07:00
enable_rc6 = false;
}
if (!I915_READ(GEN8_PUSHBUS_CONTROL) ||
!I915_READ(GEN8_PUSHBUS_ENABLE) ||
!I915_READ(GEN8_PUSHBUS_SHIFT)) {
DRM_DEBUG_DRIVER("Pushbus not setup properly.\n");
enable_rc6 = false;
}
if (!I915_READ(GEN6_GFXPAUSE)) {
DRM_DEBUG_DRIVER("GFX pause not setup properly.\n");
enable_rc6 = false;
}
if (!I915_READ(GEN8_MISC_CTRL0)) {
DRM_DEBUG_DRIVER("GPM control not setup properly.\n");
drm/i915/bxt: Check BIOS RC6 setup before enabling RC6 RC6 setup is shared between BIOS and Driver. BIOS sets up subset of RC6 setup registers. If those are not setup Driver should not enable RC6. For implementing this, driver can check RC_CTRL0 and RC_CTRL1 values to know if BIOS has enabled HW/SW RC6. This will also enable user to control RC6 using BIOS settings alone. RC6 related instability can be avoided by disabling via BIOS settings till driver fixes it. v2: Had placed logic in gen8 function by mistake. Fixed it. Ensuring RPM is not enabled in case BIOS disabled RC6. v3: Need to disable RPM if RC6 is disabled due to BIOS settings. (Daniel) Runtime PM enabling happens before gen9_enable_rc6. Moved the updation of enable_rc6 parameter in intel_uncore_sanitize. v4: Added elaborate check for BIOS RC6 setup. Prepared check_pctx for bxt. (Imre) v5: Caching reserved stolen base and size in the driver private data. Reorganized RC6 setup check. Moved from gen9_enable_rc6 to intel_uncore_sanitize. (Imre) v6: Rebasing on the patch submitted by Imre that moves gem_init_stolen earlier in the load. v7: Removed PWRCTX_MAXCNT_VCSUNIT1 check as it applies to SKL. (Imre) v8: Fixed formatting and checkpatch issues. Fixed functional issue where RC6 ctx size check was missing. (Imre) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454697809-22113-1-git-send-email-sagar.a.kamble@intel.com
2016-02-05 11:43:29 -07:00
enable_rc6 = false;
}
return enable_rc6;
}
static bool sanitize_rc6(struct drm_i915_private *i915)
{
struct intel_device_info *info = mkwrite_device_info(i915);
/* Powersaving is controlled by the host when inside a VM */
if (intel_vgpu_active(i915))
info->has_rc6 = 0;
drm/i915/bxt: Check BIOS RC6 setup before enabling RC6 RC6 setup is shared between BIOS and Driver. BIOS sets up subset of RC6 setup registers. If those are not setup Driver should not enable RC6. For implementing this, driver can check RC_CTRL0 and RC_CTRL1 values to know if BIOS has enabled HW/SW RC6. This will also enable user to control RC6 using BIOS settings alone. RC6 related instability can be avoided by disabling via BIOS settings till driver fixes it. v2: Had placed logic in gen8 function by mistake. Fixed it. Ensuring RPM is not enabled in case BIOS disabled RC6. v3: Need to disable RPM if RC6 is disabled due to BIOS settings. (Daniel) Runtime PM enabling happens before gen9_enable_rc6. Moved the updation of enable_rc6 parameter in intel_uncore_sanitize. v4: Added elaborate check for BIOS RC6 setup. Prepared check_pctx for bxt. (Imre) v5: Caching reserved stolen base and size in the driver private data. Reorganized RC6 setup check. Moved from gen9_enable_rc6 to intel_uncore_sanitize. (Imre) v6: Rebasing on the patch submitted by Imre that moves gem_init_stolen earlier in the load. v7: Removed PWRCTX_MAXCNT_VCSUNIT1 check as it applies to SKL. (Imre) v8: Fixed formatting and checkpatch issues. Fixed functional issue where RC6 ctx size check was missing. (Imre) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454697809-22113-1-git-send-email-sagar.a.kamble@intel.com
2016-02-05 11:43:29 -07:00
if (info->has_rc6 &&
IS_GEN9_LP(i915) && !bxt_check_bios_rc6_setup(i915)) {
drm/i915/bxt: Check BIOS RC6 setup before enabling RC6 RC6 setup is shared between BIOS and Driver. BIOS sets up subset of RC6 setup registers. If those are not setup Driver should not enable RC6. For implementing this, driver can check RC_CTRL0 and RC_CTRL1 values to know if BIOS has enabled HW/SW RC6. This will also enable user to control RC6 using BIOS settings alone. RC6 related instability can be avoided by disabling via BIOS settings till driver fixes it. v2: Had placed logic in gen8 function by mistake. Fixed it. Ensuring RPM is not enabled in case BIOS disabled RC6. v3: Need to disable RPM if RC6 is disabled due to BIOS settings. (Daniel) Runtime PM enabling happens before gen9_enable_rc6. Moved the updation of enable_rc6 parameter in intel_uncore_sanitize. v4: Added elaborate check for BIOS RC6 setup. Prepared check_pctx for bxt. (Imre) v5: Caching reserved stolen base and size in the driver private data. Reorganized RC6 setup check. Moved from gen9_enable_rc6 to intel_uncore_sanitize. (Imre) v6: Rebasing on the patch submitted by Imre that moves gem_init_stolen earlier in the load. v7: Removed PWRCTX_MAXCNT_VCSUNIT1 check as it applies to SKL. (Imre) v8: Fixed formatting and checkpatch issues. Fixed functional issue where RC6 ctx size check was missing. (Imre) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454697809-22113-1-git-send-email-sagar.a.kamble@intel.com
2016-02-05 11:43:29 -07:00
DRM_INFO("RC6 disabled by BIOS\n");
info->has_rc6 = 0;
drm/i915/bxt: Check BIOS RC6 setup before enabling RC6 RC6 setup is shared between BIOS and Driver. BIOS sets up subset of RC6 setup registers. If those are not setup Driver should not enable RC6. For implementing this, driver can check RC_CTRL0 and RC_CTRL1 values to know if BIOS has enabled HW/SW RC6. This will also enable user to control RC6 using BIOS settings alone. RC6 related instability can be avoided by disabling via BIOS settings till driver fixes it. v2: Had placed logic in gen8 function by mistake. Fixed it. Ensuring RPM is not enabled in case BIOS disabled RC6. v3: Need to disable RPM if RC6 is disabled due to BIOS settings. (Daniel) Runtime PM enabling happens before gen9_enable_rc6. Moved the updation of enable_rc6 parameter in intel_uncore_sanitize. v4: Added elaborate check for BIOS RC6 setup. Prepared check_pctx for bxt. (Imre) v5: Caching reserved stolen base and size in the driver private data. Reorganized RC6 setup check. Moved from gen9_enable_rc6 to intel_uncore_sanitize. (Imre) v6: Rebasing on the patch submitted by Imre that moves gem_init_stolen earlier in the load. v7: Removed PWRCTX_MAXCNT_VCSUNIT1 check as it applies to SKL. (Imre) v8: Fixed formatting and checkpatch issues. Fixed functional issue where RC6 ctx size check was missing. (Imre) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454697809-22113-1-git-send-email-sagar.a.kamble@intel.com
2016-02-05 11:43:29 -07:00
}
/*
* We assume that we do not have any deep rc6 levels if we don't have
* have the previous rc6 level supported, i.e. we use HAS_RC6()
* as the initial coarse check for rc6 in general, moving on to
* progressively finer/deeper levels.
*/
if (!info->has_rc6 && info->has_rc6p)
info->has_rc6p = 0;
return info->has_rc6;
}
static void gen6_init_rps_frequencies(struct drm_i915_private *dev_priv)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
/* All of these values are in units of 50MHz */
/* static values from HW: RP0 > RP1 > RPn (min_freq) */
if (IS_GEN9_LP(dev_priv)) {
u32 rp_state_cap = I915_READ(BXT_RP_STATE_CAP);
rps->rp0_freq = (rp_state_cap >> 16) & 0xff;
rps->rp1_freq = (rp_state_cap >> 8) & 0xff;
rps->min_freq = (rp_state_cap >> 0) & 0xff;
} else {
u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
rps->rp0_freq = (rp_state_cap >> 0) & 0xff;
rps->rp1_freq = (rp_state_cap >> 8) & 0xff;
rps->min_freq = (rp_state_cap >> 16) & 0xff;
}
/* hw_max = RP0 until we check for overclocking */
rps->max_freq = rps->rp0_freq;
rps->efficient_freq = rps->rp1_freq;
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv) ||
IS_GEN9_BC(dev_priv) || INTEL_GEN(dev_priv) >= 10) {
u32 ddcc_status = 0;
if (sandybridge_pcode_read(dev_priv,
HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL,
&ddcc_status) == 0)
rps->efficient_freq =
clamp_t(u8,
((ddcc_status >> 8) & 0xff),
rps->min_freq,
rps->max_freq);
}
if (IS_GEN9_BC(dev_priv) || INTEL_GEN(dev_priv) >= 10) {
/* Store the frequency values in 16.66 MHZ units, which is
* the natural hardware unit for SKL
*/
rps->rp0_freq *= GEN9_FREQ_SCALER;
rps->rp1_freq *= GEN9_FREQ_SCALER;
rps->min_freq *= GEN9_FREQ_SCALER;
rps->max_freq *= GEN9_FREQ_SCALER;
rps->efficient_freq *= GEN9_FREQ_SCALER;
}
}
static void reset_rps(struct drm_i915_private *dev_priv,
int (*set)(struct drm_i915_private *, u8))
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
u8 freq = rps->cur_freq;
/* force a reset */
drm/i915: Interactive RPS mode RPS provides a feedback loop where we use the load during the previous evaluation interval to decide whether to up or down clock the GPU frequency. Our responsiveness is split into 3 regimes, a high and low plateau with the intent to keep the gpu clocked high to cover occasional stalls under high load, and low despite occasional glitches under steady low load, and inbetween. However, we run into situations like kodi where we want to stay at low power (video decoding is done efficiently inside the fixed function HW and doesn't need high clocks even for high bitrate streams), but just occasionally the pipeline is more complex than a video decode and we need a smidgen of extra GPU power to present on time. In the high power regime, we sample at sub frame intervals with a bias to upclocking, and conversely at low power we sample over a few frames worth to provide what we consider to be the right levels of responsiveness respectively. At low power, we more or less expect to be kicked out to high power at the start of a busy sequence by waitboosting. Prior to commit e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request") whenever we missed the frame or stalled, we would immediate go full throttle and upclock the GPU to max. But in commit e9af4ea2b9e7, we relaxed the waitboosting to only apply if the pipeline was deep to avoid over-committing resources for a near miss. Sadly though, a near miss is still a miss, and perceptible as jitter in the frame delivery. To try and prevent the near miss before having to resort to boosting after the fact, we use the pageflip queue as an indication that we are in an "interactive" regime and so should sample the load more frequently to provide power before the frame misses it vblank. This will make us more favorable to providing a small power increase (one or two bins) as required rather than going all the way to maximum and then having to work back down again. (We still keep the waitboosting mechanism around just in case a dramatic change in system load requires urgent uplocking, faster than we can provide in a few evaluation intervals.) v2: Reduce rps_set_interactive to a boolean parameter to avoid the confusion of what if they wanted a new power mode after pinning to a different mode (which to choose?) v3: Only reprogram RPS while the GT is awake, it will be set when we wake the GT, and while off warns about being used outside of rpm. v4: Fix deferred application of interactive mode v5: s/state/interactive/ v6: Group the mutex with its principle in a substruct Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107111 Fixes: e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180731132629.3381-1-chris@chris-wilson.co.uk
2018-07-31 07:26:29 -06:00
rps->power.mode = -1;
rps->cur_freq = -1;
if (set(dev_priv, freq))
DRM_ERROR("Failed to reset RPS to initial values\n");
}
/* See the Gen9_GT_PM_Programming_Guide doc for the below */
static void gen9_enable_rps(struct drm_i915_private *dev_priv)
{
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* Program defaults and thresholds for RPS */
if (IS_GEN9(dev_priv))
I915_WRITE(GEN6_RC_VIDEO_FREQ,
GEN9_FREQUENCY(dev_priv->gt_pm.rps.rp1_freq));
/* 1 second timeout*/
I915_WRITE(GEN6_RP_DOWN_TIMEOUT,
GT_INTERVAL_FROM_US(dev_priv, 1000000));
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 0xa);
/* Leaning on the below call to gen6_set_rps to program/setup the
* Up/Down EI & threshold registers, as well as the RP_CONTROL,
* RP_INTERRUPT_LIMITS & RPNSWREQ registers */
reset_rps(dev_priv, gen6_set_rps);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void gen9_enable_rc6(struct drm_i915_private *dev_priv)
{
struct intel_engine_cs *engine;
drm/i915: Allocate intel_engine_cs structure only for the enabled engines With the possibility of addition of many more number of rings in future, the drm_i915_private structure could bloat as an array, of type intel_engine_cs, is embedded inside it. struct intel_engine_cs engine[I915_NUM_ENGINES]; Though this is still fine as generally there is only a single instance of drm_i915_private structure used, but not all of the possible rings would be enabled or active on most of the platforms. Some memory can be saved by allocating intel_engine_cs structure only for the enabled/active engines. Currently the engine/ring ID is kept static and dev_priv->engine[] is simply indexed using the enums defined in intel_engine_id. To save memory and continue using the static engine/ring IDs, 'engine' is defined as an array of pointers. struct intel_engine_cs *engine[I915_NUM_ENGINES]; dev_priv->engine[engine_ID] will be NULL for disabled engine instances. There is a text size reduction of 928 bytes, from 1028200 to 1027272, for i915.o file (but for i915.ko file text size remain same as 1193131 bytes). v2: - Remove the engine iterator field added in drm_i915_private structure, instead pass a local iterator variable to the for_each_engine** macros. (Chris) - Do away with intel_engine_initialized() and instead directly use the NULL pointer check on engine pointer. (Chris) v3: - Remove for_each_engine_id() macro, as the updated macro for_each_engine() can be used in place of it. (Chris) - Protect the access to Render engine Fault register with a NULL check, as engine specific init is done later in Driver load sequence. v4: - Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris) - Kill the superfluous init_engine_lists(). v5: - Cleanup the intel_engines_init() & intel_engines_setup(), with respect to allocation of intel_engine_cs structure. (Chris) v6: - Rebase. v7: - Optimize the for_each_engine_masked() macro. (Chris) - Change the type of 'iter' local variable to enum intel_engine_id. (Chris) - Rebase. v8: Rebase. v9: Rebase. v10: - For index calculation use engine ID instead of pointer based arithmetic in intel_engine_sync_index() as engine pointers are not contiguous now (Chris) - For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas) - Use for_each_engine macro for cleanup in intel_engines_init() and remove check for NULL engine pointer in cleanup() routines. (Joonas) v11: Rebase. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
2016-10-13 11:14:48 -06:00
enum intel_engine_id id;
u32 rc6_mode;
/* 1a: Software RC state - RC0 */
I915_WRITE(GEN6_RC_STATE, 0);
/* 1b: Get forcewake during program sequence. Although the driver
* hasn't enabled a state yet where we need forcewake, BIOS may have.*/
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* 2a: Disable RC states. */
I915_WRITE(GEN6_RC_CONTROL, 0);
/* 2b: Program RC6 thresholds.*/
if (INTEL_GEN(dev_priv) >= 10) {
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 54 << 16 | 85);
I915_WRITE(GEN10_MEDIA_WAKE_RATE_LIMIT, 150);
} else if (IS_SKYLAKE(dev_priv)) {
/*
* WaRsDoubleRc6WrlWithCoarsePowerGating:skl Doubling WRL only
* when CPG is enabled
*/
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 108 << 16);
} else {
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 54 << 16);
}
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
drm/i915: Allocate intel_engine_cs structure only for the enabled engines With the possibility of addition of many more number of rings in future, the drm_i915_private structure could bloat as an array, of type intel_engine_cs, is embedded inside it. struct intel_engine_cs engine[I915_NUM_ENGINES]; Though this is still fine as generally there is only a single instance of drm_i915_private structure used, but not all of the possible rings would be enabled or active on most of the platforms. Some memory can be saved by allocating intel_engine_cs structure only for the enabled/active engines. Currently the engine/ring ID is kept static and dev_priv->engine[] is simply indexed using the enums defined in intel_engine_id. To save memory and continue using the static engine/ring IDs, 'engine' is defined as an array of pointers. struct intel_engine_cs *engine[I915_NUM_ENGINES]; dev_priv->engine[engine_ID] will be NULL for disabled engine instances. There is a text size reduction of 928 bytes, from 1028200 to 1027272, for i915.o file (but for i915.ko file text size remain same as 1193131 bytes). v2: - Remove the engine iterator field added in drm_i915_private structure, instead pass a local iterator variable to the for_each_engine** macros. (Chris) - Do away with intel_engine_initialized() and instead directly use the NULL pointer check on engine pointer. (Chris) v3: - Remove for_each_engine_id() macro, as the updated macro for_each_engine() can be used in place of it. (Chris) - Protect the access to Render engine Fault register with a NULL check, as engine specific init is done later in Driver load sequence. v4: - Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris) - Kill the superfluous init_engine_lists(). v5: - Cleanup the intel_engines_init() & intel_engines_setup(), with respect to allocation of intel_engine_cs structure. (Chris) v6: - Rebase. v7: - Optimize the for_each_engine_masked() macro. (Chris) - Change the type of 'iter' local variable to enum intel_engine_id. (Chris) - Rebase. v8: Rebase. v9: Rebase. v10: - For index calculation use engine ID instead of pointer based arithmetic in intel_engine_sync_index() as engine pointers are not contiguous now (Chris) - For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas) - Use for_each_engine macro for cleanup in intel_engines_init() and remove check for NULL engine pointer in cleanup() routines. (Joonas) v11: Rebase. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
2016-10-13 11:14:48 -06:00
for_each_engine(engine, dev_priv, id)
I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10);
if (HAS_GUC(dev_priv))
I915_WRITE(GUC_MAX_IDLE_COUNT, 0xA);
I915_WRITE(GEN6_RC_SLEEP, 0);
/*
* 2c: Program Coarse Power Gating Policies.
*
* Bspec's guidance is to use 25us (really 25 * 1280ns) here. What we
* use instead is a more conservative estimate for the maximum time
* it takes us to service a CS interrupt and submit a new ELSP - that
* is the time which the GPU is idle waiting for the CPU to select the
* next request to execute. If the idle hysteresis is less than that
* interrupt service latency, the hardware will automatically gate
* the power well and we will then incur the wake up cost on top of
* the service latency. A similar guide from intel_pstate is that we
* do not want the enable hysteresis to less than the wakeup latency.
*
* igt/gem_exec_nop/sequential provides a rough estimate for the
* service latency, and puts it around 10us for Broadwell (and other
* big core) and around 40us for Broxton (and other low power cores).
* [Note that for legacy ringbuffer submission, this is less than 1us!]
* However, the wakeup latency on Broxton is closer to 100us. To be
* conservative, we have to factor in a context switch on top (due
* to ksoftirqd).
*/
I915_WRITE(GEN9_MEDIA_PG_IDLE_HYSTERESIS, 250);
I915_WRITE(GEN9_RENDER_PG_IDLE_HYSTERESIS, 250);
/* 3a: Enable RC6 */
I915_WRITE(GEN6_RC6_THRESHOLD, 37500); /* 37.5/125ms per EI */
/* WaRsUseTimeoutMode:cnl (pre-prod) */
if (IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_C0))
rc6_mode = GEN7_RC_CTL_TO_MODE;
else
rc6_mode = GEN6_RC_CTL_EI_MODE(1);
I915_WRITE(GEN6_RC_CONTROL,
GEN6_RC_CTL_HW_ENABLE |
GEN6_RC_CTL_RC6_ENABLE |
rc6_mode);
/*
* 3b: Enable Coarse Power Gating only when RC6 is enabled.
* WaRsDisableCoarsePowerGating:skl,cnl - Render/Media PG need to be disabled with RC6.
*/
if (NEEDS_WaRsDisableCoarsePowerGating(dev_priv))
I915_WRITE(GEN9_PG_ENABLE, 0);
else
I915_WRITE(GEN9_PG_ENABLE,
GEN9_RENDER_PG_ENABLE | GEN9_MEDIA_PG_ENABLE);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void gen8_enable_rc6(struct drm_i915_private *dev_priv)
{
struct intel_engine_cs *engine;
drm/i915: Allocate intel_engine_cs structure only for the enabled engines With the possibility of addition of many more number of rings in future, the drm_i915_private structure could bloat as an array, of type intel_engine_cs, is embedded inside it. struct intel_engine_cs engine[I915_NUM_ENGINES]; Though this is still fine as generally there is only a single instance of drm_i915_private structure used, but not all of the possible rings would be enabled or active on most of the platforms. Some memory can be saved by allocating intel_engine_cs structure only for the enabled/active engines. Currently the engine/ring ID is kept static and dev_priv->engine[] is simply indexed using the enums defined in intel_engine_id. To save memory and continue using the static engine/ring IDs, 'engine' is defined as an array of pointers. struct intel_engine_cs *engine[I915_NUM_ENGINES]; dev_priv->engine[engine_ID] will be NULL for disabled engine instances. There is a text size reduction of 928 bytes, from 1028200 to 1027272, for i915.o file (but for i915.ko file text size remain same as 1193131 bytes). v2: - Remove the engine iterator field added in drm_i915_private structure, instead pass a local iterator variable to the for_each_engine** macros. (Chris) - Do away with intel_engine_initialized() and instead directly use the NULL pointer check on engine pointer. (Chris) v3: - Remove for_each_engine_id() macro, as the updated macro for_each_engine() can be used in place of it. (Chris) - Protect the access to Render engine Fault register with a NULL check, as engine specific init is done later in Driver load sequence. v4: - Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris) - Kill the superfluous init_engine_lists(). v5: - Cleanup the intel_engines_init() & intel_engines_setup(), with respect to allocation of intel_engine_cs structure. (Chris) v6: - Rebase. v7: - Optimize the for_each_engine_masked() macro. (Chris) - Change the type of 'iter' local variable to enum intel_engine_id. (Chris) - Rebase. v8: Rebase. v9: Rebase. v10: - For index calculation use engine ID instead of pointer based arithmetic in intel_engine_sync_index() as engine pointers are not contiguous now (Chris) - For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas) - Use for_each_engine macro for cleanup in intel_engines_init() and remove check for NULL engine pointer in cleanup() routines. (Joonas) v11: Rebase. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
2016-10-13 11:14:48 -06:00
enum intel_engine_id id;
/* 1a: Software RC state - RC0 */
I915_WRITE(GEN6_RC_STATE, 0);
/* 1b: Get forcewake during program sequence. Although the driver
* hasn't enabled a state yet where we need forcewake, BIOS may have.*/
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* 2a: Disable RC states. */
I915_WRITE(GEN6_RC_CONTROL, 0);
/* 2b: Program RC6 thresholds.*/
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
drm/i915: Allocate intel_engine_cs structure only for the enabled engines With the possibility of addition of many more number of rings in future, the drm_i915_private structure could bloat as an array, of type intel_engine_cs, is embedded inside it. struct intel_engine_cs engine[I915_NUM_ENGINES]; Though this is still fine as generally there is only a single instance of drm_i915_private structure used, but not all of the possible rings would be enabled or active on most of the platforms. Some memory can be saved by allocating intel_engine_cs structure only for the enabled/active engines. Currently the engine/ring ID is kept static and dev_priv->engine[] is simply indexed using the enums defined in intel_engine_id. To save memory and continue using the static engine/ring IDs, 'engine' is defined as an array of pointers. struct intel_engine_cs *engine[I915_NUM_ENGINES]; dev_priv->engine[engine_ID] will be NULL for disabled engine instances. There is a text size reduction of 928 bytes, from 1028200 to 1027272, for i915.o file (but for i915.ko file text size remain same as 1193131 bytes). v2: - Remove the engine iterator field added in drm_i915_private structure, instead pass a local iterator variable to the for_each_engine** macros. (Chris) - Do away with intel_engine_initialized() and instead directly use the NULL pointer check on engine pointer. (Chris) v3: - Remove for_each_engine_id() macro, as the updated macro for_each_engine() can be used in place of it. (Chris) - Protect the access to Render engine Fault register with a NULL check, as engine specific init is done later in Driver load sequence. v4: - Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris) - Kill the superfluous init_engine_lists(). v5: - Cleanup the intel_engines_init() & intel_engines_setup(), with respect to allocation of intel_engine_cs structure. (Chris) v6: - Rebase. v7: - Optimize the for_each_engine_masked() macro. (Chris) - Change the type of 'iter' local variable to enum intel_engine_id. (Chris) - Rebase. v8: Rebase. v9: Rebase. v10: - For index calculation use engine ID instead of pointer based arithmetic in intel_engine_sync_index() as engine pointers are not contiguous now (Chris) - For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas) - Use for_each_engine macro for cleanup in intel_engines_init() and remove check for NULL engine pointer in cleanup() routines. (Joonas) v11: Rebase. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
2016-10-13 11:14:48 -06:00
for_each_engine(engine, dev_priv, id)
I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10);
I915_WRITE(GEN6_RC_SLEEP, 0);
I915_WRITE(GEN6_RC6_THRESHOLD, 625); /* 800us/1.28 for TO */
/* 3: Enable RC6 */
I915_WRITE(GEN6_RC_CONTROL,
GEN6_RC_CTL_HW_ENABLE |
GEN7_RC_CTL_TO_MODE |
GEN6_RC_CTL_RC6_ENABLE);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void gen8_enable_rps(struct drm_i915_private *dev_priv)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* 1 Program defaults and thresholds for RPS*/
I915_WRITE(GEN6_RPNSWREQ,
HSW_FREQUENCY(rps->rp1_freq));
I915_WRITE(GEN6_RC_VIDEO_FREQ,
HSW_FREQUENCY(rps->rp1_freq));
/* NB: Docs say 1s, and 1000000 - which aren't equivalent */
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 100000000 / 128); /* 1 second timeout */
/* Docs recommend 900MHz, and 300 MHz respectively */
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
rps->max_freq_softlimit << 24 |
rps->min_freq_softlimit << 16);
I915_WRITE(GEN6_RP_UP_THRESHOLD, 7600000 / 128); /* 76ms busyness per EI, 90% */
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 31300000 / 128); /* 313ms busyness per EI, 70%*/
I915_WRITE(GEN6_RP_UP_EI, 66000); /* 84.48ms, XXX: random? */
I915_WRITE(GEN6_RP_DOWN_EI, 350000); /* 448ms, XXX: random? */
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
/* 2: Enable RPS */
I915_WRITE(GEN6_RP_CONTROL,
GEN6_RP_MEDIA_TURBO |
GEN6_RP_MEDIA_HW_NORMAL_MODE |
GEN6_RP_MEDIA_IS_GFX |
GEN6_RP_ENABLE |
GEN6_RP_UP_BUSY_AVG |
GEN6_RP_DOWN_IDLE_AVG);
reset_rps(dev_priv, gen6_set_rps);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void gen6_enable_rc6(struct drm_i915_private *dev_priv)
{
struct intel_engine_cs *engine;
drm/i915: Allocate intel_engine_cs structure only for the enabled engines With the possibility of addition of many more number of rings in future, the drm_i915_private structure could bloat as an array, of type intel_engine_cs, is embedded inside it. struct intel_engine_cs engine[I915_NUM_ENGINES]; Though this is still fine as generally there is only a single instance of drm_i915_private structure used, but not all of the possible rings would be enabled or active on most of the platforms. Some memory can be saved by allocating intel_engine_cs structure only for the enabled/active engines. Currently the engine/ring ID is kept static and dev_priv->engine[] is simply indexed using the enums defined in intel_engine_id. To save memory and continue using the static engine/ring IDs, 'engine' is defined as an array of pointers. struct intel_engine_cs *engine[I915_NUM_ENGINES]; dev_priv->engine[engine_ID] will be NULL for disabled engine instances. There is a text size reduction of 928 bytes, from 1028200 to 1027272, for i915.o file (but for i915.ko file text size remain same as 1193131 bytes). v2: - Remove the engine iterator field added in drm_i915_private structure, instead pass a local iterator variable to the for_each_engine** macros. (Chris) - Do away with intel_engine_initialized() and instead directly use the NULL pointer check on engine pointer. (Chris) v3: - Remove for_each_engine_id() macro, as the updated macro for_each_engine() can be used in place of it. (Chris) - Protect the access to Render engine Fault register with a NULL check, as engine specific init is done later in Driver load sequence. v4: - Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris) - Kill the superfluous init_engine_lists(). v5: - Cleanup the intel_engines_init() & intel_engines_setup(), with respect to allocation of intel_engine_cs structure. (Chris) v6: - Rebase. v7: - Optimize the for_each_engine_masked() macro. (Chris) - Change the type of 'iter' local variable to enum intel_engine_id. (Chris) - Rebase. v8: Rebase. v9: Rebase. v10: - For index calculation use engine ID instead of pointer based arithmetic in intel_engine_sync_index() as engine pointers are not contiguous now (Chris) - For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas) - Use for_each_engine macro for cleanup in intel_engines_init() and remove check for NULL engine pointer in cleanup() routines. (Joonas) v11: Rebase. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
2016-10-13 11:14:48 -06:00
enum intel_engine_id id;
u32 rc6vids, rc6_mask;
u32 gtfifodbg;
int ret;
I915_WRITE(GEN6_RC_STATE, 0);
/* Clear the DBG now so we don't confuse earlier errors */
gtfifodbg = I915_READ(GTFIFODBG);
if (gtfifodbg) {
DRM_ERROR("GT fifo had a previous error %x\n", gtfifodbg);
I915_WRITE(GTFIFODBG, gtfifodbg);
}
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* disable the counters and set deterministic thresholds */
I915_WRITE(GEN6_RC_CONTROL, 0);
I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16);
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30);
I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30);
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
drm/i915: Allocate intel_engine_cs structure only for the enabled engines With the possibility of addition of many more number of rings in future, the drm_i915_private structure could bloat as an array, of type intel_engine_cs, is embedded inside it. struct intel_engine_cs engine[I915_NUM_ENGINES]; Though this is still fine as generally there is only a single instance of drm_i915_private structure used, but not all of the possible rings would be enabled or active on most of the platforms. Some memory can be saved by allocating intel_engine_cs structure only for the enabled/active engines. Currently the engine/ring ID is kept static and dev_priv->engine[] is simply indexed using the enums defined in intel_engine_id. To save memory and continue using the static engine/ring IDs, 'engine' is defined as an array of pointers. struct intel_engine_cs *engine[I915_NUM_ENGINES]; dev_priv->engine[engine_ID] will be NULL for disabled engine instances. There is a text size reduction of 928 bytes, from 1028200 to 1027272, for i915.o file (but for i915.ko file text size remain same as 1193131 bytes). v2: - Remove the engine iterator field added in drm_i915_private structure, instead pass a local iterator variable to the for_each_engine** macros. (Chris) - Do away with intel_engine_initialized() and instead directly use the NULL pointer check on engine pointer. (Chris) v3: - Remove for_each_engine_id() macro, as the updated macro for_each_engine() can be used in place of it. (Chris) - Protect the access to Render engine Fault register with a NULL check, as engine specific init is done later in Driver load sequence. v4: - Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris) - Kill the superfluous init_engine_lists(). v5: - Cleanup the intel_engines_init() & intel_engines_setup(), with respect to allocation of intel_engine_cs structure. (Chris) v6: - Rebase. v7: - Optimize the for_each_engine_masked() macro. (Chris) - Change the type of 'iter' local variable to enum intel_engine_id. (Chris) - Rebase. v8: Rebase. v9: Rebase. v10: - For index calculation use engine ID instead of pointer based arithmetic in intel_engine_sync_index() as engine pointers are not contiguous now (Chris) - For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas) - Use for_each_engine macro for cleanup in intel_engines_init() and remove check for NULL engine pointer in cleanup() routines. (Joonas) v11: Rebase. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
2016-10-13 11:14:48 -06:00
for_each_engine(engine, dev_priv, id)
I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10);
I915_WRITE(GEN6_RC_SLEEP, 0);
I915_WRITE(GEN6_RC1e_THRESHOLD, 1000);
if (IS_IVYBRIDGE(dev_priv))
I915_WRITE(GEN6_RC6_THRESHOLD, 125000);
else
I915_WRITE(GEN6_RC6_THRESHOLD, 50000);
I915_WRITE(GEN6_RC6p_THRESHOLD, 150000);
I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
/* We don't use those on Haswell */
rc6_mask = GEN6_RC_CTL_RC6_ENABLE;
if (HAS_RC6p(dev_priv))
rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE;
if (HAS_RC6pp(dev_priv))
rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE;
I915_WRITE(GEN6_RC_CONTROL,
rc6_mask |
GEN6_RC_CTL_EI_MODE(1) |
GEN6_RC_CTL_HW_ENABLE);
rc6vids = 0;
ret = sandybridge_pcode_read(dev_priv, GEN6_PCODE_READ_RC6VIDS, &rc6vids);
if (IS_GEN6(dev_priv) && ret) {
DRM_DEBUG_DRIVER("Couldn't check for BIOS workaround\n");
} else if (IS_GEN6(dev_priv) && (GEN6_DECODE_RC6_VID(rc6vids & 0xff) < 450)) {
DRM_DEBUG_DRIVER("You should update your BIOS. Correcting minimum rc6 voltage (%dmV->%dmV)\n",
GEN6_DECODE_RC6_VID(rc6vids & 0xff), 450);
rc6vids &= 0xffff00;
rc6vids |= GEN6_ENCODE_RC6_VID(450);
ret = sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_RC6VIDS, rc6vids);
if (ret)
DRM_ERROR("Couldn't fix incorrect rc6 voltage\n");
}
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void gen6_enable_rps(struct drm_i915_private *dev_priv)
{
/* Here begins a magic sequence of register writes to enable
* auto-downclocking.
*
* Perhaps there might be some value in exposing these to
* userspace...
*/
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* Power down if completely idle for over 50ms */
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 50000);
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
reset_rps(dev_priv, gen6_set_rps);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void gen6_update_ring_freq(struct drm_i915_private *dev_priv)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
const int min_freq = 15;
const int scaling_factor = 180;
unsigned int gpu_freq;
unsigned int max_ia_freq, min_ring_freq;
unsigned int max_gpu_freq, min_gpu_freq;
struct cpufreq_policy *policy;
WARN_ON(!mutex_is_locked(&dev_priv->pcu_lock));
if (rps->max_freq <= rps->min_freq)
return;
policy = cpufreq_cpu_get(0);
if (policy) {
max_ia_freq = policy->cpuinfo.max_freq;
cpufreq_cpu_put(policy);
} else {
/*
* Default to measured freq if none found, PCU will ensure we
* don't go over
*/
max_ia_freq = tsc_khz;
}
/* Convert from kHz to MHz */
max_ia_freq /= 1000;
min_ring_freq = I915_READ(DCLK) & 0xf;
/* convert DDR frequency from units of 266.6MHz to bandwidth */
min_ring_freq = mult_frac(min_ring_freq, 8, 3);
min_gpu_freq = rps->min_freq;
max_gpu_freq = rps->max_freq;
if (IS_GEN9_BC(dev_priv) || INTEL_GEN(dev_priv) >= 10) {
/* Convert GT frequency to 50 HZ units */
min_gpu_freq /= GEN9_FREQ_SCALER;
max_gpu_freq /= GEN9_FREQ_SCALER;
}
/*
* For each potential GPU frequency, load a ring frequency we'd like
* to use for memory access. We do this by specifying the IA frequency
* the PCU should use as a reference to determine the ring frequency.
*/
for (gpu_freq = max_gpu_freq; gpu_freq >= min_gpu_freq; gpu_freq--) {
const int diff = max_gpu_freq - gpu_freq;
unsigned int ia_freq = 0, ring_freq = 0;
if (IS_GEN9_BC(dev_priv) || INTEL_GEN(dev_priv) >= 10) {
/*
* ring_freq = 2 * GT. ring_freq is in 100MHz units
* No floor required for ring frequency on SKL.
*/
ring_freq = gpu_freq;
} else if (INTEL_GEN(dev_priv) >= 8) {
/* max(2 * GT, DDR). NB: GT is 50MHz units */
ring_freq = max(min_ring_freq, gpu_freq);
} else if (IS_HASWELL(dev_priv)) {
ring_freq = mult_frac(gpu_freq, 5, 4);
ring_freq = max(min_ring_freq, ring_freq);
/* leave ia_freq as the default, chosen by cpufreq */
} else {
/* On older processors, there is no separate ring
* clock domain, so in order to boost the bandwidth
* of the ring, we need to upclock the CPU (ia_freq).
*
* For GPU frequencies less than 750MHz,
* just use the lowest ring freq.
*/
if (gpu_freq < min_freq)
ia_freq = 800;
else
ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100);
}
sandybridge_pcode_write(dev_priv,
GEN6_PCODE_WRITE_MIN_FREQ_TABLE,
ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT |
ring_freq << GEN6_PCODE_FREQ_RING_RATIO_SHIFT |
gpu_freq);
}
}
static int cherryview_rps_max_freq(struct drm_i915_private *dev_priv)
{
u32 val, rp0;
val = vlv_punit_read(dev_priv, FB_GFX_FMAX_AT_VMAX_FUSE);
switch (INTEL_INFO(dev_priv)->sseu.eu_total) {
case 8:
/* (2 * 4) config */
rp0 = (val >> FB_GFX_FMAX_AT_VMAX_2SS4EU_FUSE_SHIFT);
break;
case 12:
/* (2 * 6) config */
rp0 = (val >> FB_GFX_FMAX_AT_VMAX_2SS6EU_FUSE_SHIFT);
break;
case 16:
/* (2 * 8) config */
default:
/* Setting (2 * 8) Min RP0 for any other combination */
rp0 = (val >> FB_GFX_FMAX_AT_VMAX_2SS8EU_FUSE_SHIFT);
break;
}
rp0 = (rp0 & FB_GFX_FREQ_FUSE_MASK);
return rp0;
}
static int cherryview_rps_rpe_freq(struct drm_i915_private *dev_priv)
{
u32 val, rpe;
val = vlv_punit_read(dev_priv, PUNIT_GPU_DUTYCYCLE_REG);
rpe = (val >> PUNIT_GPU_DUTYCYCLE_RPE_FREQ_SHIFT) & PUNIT_GPU_DUTYCYCLE_RPE_FREQ_MASK;
return rpe;
}
static int cherryview_rps_guar_freq(struct drm_i915_private *dev_priv)
{
u32 val, rp1;
val = vlv_punit_read(dev_priv, FB_GFX_FMAX_AT_VMAX_FUSE);
rp1 = (val & FB_GFX_FREQ_FUSE_MASK);
return rp1;
}
static u32 cherryview_rps_min_freq(struct drm_i915_private *dev_priv)
{
u32 val, rpn;
val = vlv_punit_read(dev_priv, FB_GFX_FMIN_AT_VMIN_FUSE);
rpn = ((val >> FB_GFX_FMIN_AT_VMIN_FUSE_SHIFT) &
FB_GFX_FREQ_FUSE_MASK);
return rpn;
}
static int valleyview_rps_guar_freq(struct drm_i915_private *dev_priv)
{
u32 val, rp1;
val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FREQ_FUSE);
rp1 = (val & FB_GFX_FGUARANTEED_FREQ_FUSE_MASK) >> FB_GFX_FGUARANTEED_FREQ_FUSE_SHIFT;
return rp1;
}
static int valleyview_rps_max_freq(struct drm_i915_private *dev_priv)
{
u32 val, rp0;
val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FREQ_FUSE);
rp0 = (val & FB_GFX_MAX_FREQ_FUSE_MASK) >> FB_GFX_MAX_FREQ_FUSE_SHIFT;
/* Clamp to max */
rp0 = min_t(u32, rp0, 0xea);
return rp0;
}
static int valleyview_rps_rpe_freq(struct drm_i915_private *dev_priv)
{
u32 val, rpe;
val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FMAX_FUSE_LO);
rpe = (val & FB_FMAX_VMIN_FREQ_LO_MASK) >> FB_FMAX_VMIN_FREQ_LO_SHIFT;
val = vlv_nc_read(dev_priv, IOSF_NC_FB_GFX_FMAX_FUSE_HI);
rpe |= (val & FB_FMAX_VMIN_FREQ_HI_MASK) << 5;
return rpe;
}
static int valleyview_rps_min_freq(struct drm_i915_private *dev_priv)
{
u32 val;
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_LFM) & 0xff;
/*
* According to the BYT Punit GPU turbo HAS 1.1.6.3 the minimum value
* for the minimum frequency in GPLL mode is 0xc1. Contrary to this on
* a BYT-M B0 the above register contains 0xbf. Moreover when setting
* a frequency Punit will not allow values below 0xc0. Clamp it 0xc0
* to make sure it matches what Punit accepts.
*/
return max_t(u32, val, 0xc0);
}
/* Check that the pctx buffer wasn't move under us. */
static void valleyview_check_pctx(struct drm_i915_private *dev_priv)
{
unsigned long pctx_addr = I915_READ(VLV_PCBR) & ~4095;
WARN_ON(pctx_addr != dev_priv->dsm.start +
dev_priv->vlv_pctx->stolen->start);
}
/* Check that the pcbr address is not empty. */
static void cherryview_check_pctx(struct drm_i915_private *dev_priv)
{
unsigned long pctx_addr = I915_READ(VLV_PCBR) & ~4095;
WARN_ON((pctx_addr >> VLV_PCBR_ADDR_SHIFT) == 0);
}
static void cherryview_setup_pctx(struct drm_i915_private *dev_priv)
{
resource_size_t pctx_paddr, paddr;
resource_size_t pctx_size = 32*1024;
u32 pcbr;
pcbr = I915_READ(VLV_PCBR);
if ((pcbr >> VLV_PCBR_ADDR_SHIFT) == 0) {
DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n");
paddr = dev_priv->dsm.end + 1 - pctx_size;
GEM_BUG_ON(paddr > U32_MAX);
pctx_paddr = (paddr & (~4095));
I915_WRITE(VLV_PCBR, pctx_paddr);
}
DRM_DEBUG_DRIVER("PCBR: 0x%08x\n", I915_READ(VLV_PCBR));
}
static void valleyview_setup_pctx(struct drm_i915_private *dev_priv)
{
struct drm_i915_gem_object *pctx;
resource_size_t pctx_paddr;
resource_size_t pctx_size = 24*1024;
u32 pcbr;
pcbr = I915_READ(VLV_PCBR);
if (pcbr) {
/* BIOS set it up already, grab the pre-alloc'd space */
resource_size_t pcbr_offset;
pcbr_offset = (pcbr & (~4095)) - dev_priv->dsm.start;
pctx = i915_gem_object_create_stolen_for_preallocated(dev_priv,
pcbr_offset,
I915_GTT_OFFSET_NONE,
pctx_size);
goto out;
}
DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n");
/*
* From the Gunit register HAS:
* The Gfx driver is expected to program this register and ensure
* proper allocation within Gfx stolen memory. For example, this
* register should be programmed such than the PCBR range does not
* overlap with other ranges, such as the frame buffer, protected
* memory, or any other relevant ranges.
*/
pctx = i915_gem_object_create_stolen(dev_priv, pctx_size);
if (!pctx) {
DRM_DEBUG("not enough stolen space for PCTX, disabling\n");
goto out;
}
GEM_BUG_ON(range_overflows_t(u64,
dev_priv->dsm.start,
pctx->stolen->start,
U32_MAX));
pctx_paddr = dev_priv->dsm.start + pctx->stolen->start;
I915_WRITE(VLV_PCBR, pctx_paddr);
out:
DRM_DEBUG_DRIVER("PCBR: 0x%08x\n", I915_READ(VLV_PCBR));
dev_priv->vlv_pctx = pctx;
}
static void valleyview_cleanup_pctx(struct drm_i915_private *dev_priv)
{
drm/i915: Silence warning for no vlv powercontext Along a module load error path, we may try to cleanup the powercontext even before we have allocated it. Reorganising GT powermanagement is an on going process, so for simplicity handle it. [ 522.733832] WARN_ON(!dev_priv->vlv_pctx) [ 522.733986] WARNING: CPU: 1 PID: 3856 at drivers/gpu/drm/i915/intel_pm.c:7350 intel_cleanup_gt_powersave+0x5f/0x70 [i915] [ 522.733991] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic btusb btrtl btbcm btintel intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul bluetooth snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core ecdh_generic lpc_ich r8169 snd_pcm mii i2c_hid prime_numbers [last unloaded: i915] [ 522.734105] CPU: 1 PID: 3856 Comm: drv_module_relo Tainted: G U 4.18.0-rc4-CI-CI_DRM_4474+ #1 [ 522.734110] Hardware name: \xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff \xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff/DN2820FYK, BIOS FYBYT10H.86A.0059.2017.0607.2130 06/07/2017 [ 522.734193] RIP: 0010:intel_cleanup_gt_powersave+0x5f/0x70 [i915] [ 522.734197] Code: 00 74 0d 48 c7 83 68 a6 00 00 00 00 00 00 eb c8 e8 36 6f 37 e1 eb ec 48 c7 c6 c5 7a 3d a0 48 c7 c7 b5 78 3d a0 e8 71 04 e0 e0 <0f> 0b eb aa 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f3 c3 0f 1f 40 [ 522.734445] RSP: 0018:ffffc900004f3af0 EFLAGS: 00010282 [ 522.734453] RAX: 0000000000000000 RBX: ffff880106360000 RCX: 0000000000000001 [ 522.734458] RDX: 0000000080000001 RSI: ffffffff820c65c4 RDI: 00000000ffffffff [ 522.734463] RBP: ffff880106360000 R08: 000000009f79baee R09: 0000000000000000 [ 522.734467] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88013b3133f8 [ 522.734472] R13: 00000000ffffffed R14: ffff880106360d58 R15: ffff88013b3133f8 [ 522.734477] FS: 00007f43f70af980(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000 [ 522.734481] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 522.734486] CR2: 000055a13a787580 CR3: 00000001325e6000 CR4: 00000000001006e0 [ 522.734490] Call Trace: [ 522.734595] intel_modeset_cleanup+0xcf/0x140 [i915] [ 522.734682] i915_driver_load+0xc85/0x10a0 [i915] [ 522.734694] ? _raw_spin_unlock_irqrestore+0x4c/0x60 [ 522.734703] ? trace_hardirqs_on_caller+0xe0/0x1b0 [ 522.734790] i915_pci_probe+0x29/0x90 [i915] [ 522.734801] pci_device_probe+0xa1/0x130 [ 522.734813] driver_probe_device+0x306/0x480 [ 522.734824] __driver_attach+0xdb/0x100 [ 522.734830] ? driver_probe_device+0x480/0x480 [ 522.734836] ? driver_probe_device+0x480/0x480 [ 522.734844] bus_for_each_dev+0x74/0xc0 [ 522.734855] bus_add_driver+0x15f/0x250 [ 522.734863] ? 0xffffffffa0793000 [ 522.734870] driver_register+0x56/0xe0 [ 522.734877] ? 0xffffffffa0793000 [ 522.734883] do_one_initcall+0x58/0x370 [ 522.734893] ? do_init_module+0x1d/0x1ea [ 522.734900] ? rcu_read_lock_sched_held+0x6f/0x80 [ 522.734906] ? kmem_cache_alloc_trace+0x282/0x2e0 [ 522.734918] do_init_module+0x56/0x1ea [ 522.734927] load_module+0x2435/0x2b20 [ 522.734965] ? __se_sys_finit_module+0xd3/0xf0 [ 522.734972] __se_sys_finit_module+0xd3/0xf0 [ 522.734995] do_syscall_64+0x55/0x190 [ 522.735003] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 522.735009] RIP: 0033:0x7f43f675d839 [ 522.735014] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 [ 522.735260] RSP: 002b:00007ffe69384238 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 522.735269] RAX: ffffffffffffffda RBX: 000056100e387090 RCX: 00007f43f675d839 [ 522.735273] RDX: 0000000000000000 RSI: 000056100e37bff0 RDI: 0000000000000003 [ 522.735278] RBP: 000056100e37bff0 R08: 0000000000000000 R09: 0000000000000000 [ 522.735282] R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 [ 522.735286] R13: 000056100e37c890 R14: 0000000000000020 R15: 0000000000000027 [ 522.735309] irq event stamp: 1389594 [ 522.735316] hardirqs last enabled at (1389593): [<ffffffff810f896c>] console_unlock+0x3fc/0x600 [ 522.735323] hardirqs last disabled at (1389594): [<ffffffff81a0111c>] error_entry+0x7c/0x100 [ 522.735329] softirqs last enabled at (1389356): [<ffffffff81c0034f>] __do_softirq+0x34f/0x505 [ 522.735336] softirqs last disabled at (1389335): [<ffffffff8108c7b9>] irq_exit+0xa9/0xc0 [ 522.735432] WARNING: CPU: 1 PID: 3856 at drivers/gpu/drm/i915/intel_pm.c:7350 intel_cleanup_gt_powersave+0x5f/0x70 [i915] Testcase: igt/drv_module_reload/basic-reload-inject Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712105454.16091-1-chris@chris-wilson.co.uk
2018-07-12 04:54:54 -06:00
struct drm_i915_gem_object *pctx;
drm/i915: Silence warning for no vlv powercontext Along a module load error path, we may try to cleanup the powercontext even before we have allocated it. Reorganising GT powermanagement is an on going process, so for simplicity handle it. [ 522.733832] WARN_ON(!dev_priv->vlv_pctx) [ 522.733986] WARNING: CPU: 1 PID: 3856 at drivers/gpu/drm/i915/intel_pm.c:7350 intel_cleanup_gt_powersave+0x5f/0x70 [i915] [ 522.733991] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic btusb btrtl btbcm btintel intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul bluetooth snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core ecdh_generic lpc_ich r8169 snd_pcm mii i2c_hid prime_numbers [last unloaded: i915] [ 522.734105] CPU: 1 PID: 3856 Comm: drv_module_relo Tainted: G U 4.18.0-rc4-CI-CI_DRM_4474+ #1 [ 522.734110] Hardware name: \xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff \xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff/DN2820FYK, BIOS FYBYT10H.86A.0059.2017.0607.2130 06/07/2017 [ 522.734193] RIP: 0010:intel_cleanup_gt_powersave+0x5f/0x70 [i915] [ 522.734197] Code: 00 74 0d 48 c7 83 68 a6 00 00 00 00 00 00 eb c8 e8 36 6f 37 e1 eb ec 48 c7 c6 c5 7a 3d a0 48 c7 c7 b5 78 3d a0 e8 71 04 e0 e0 <0f> 0b eb aa 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f3 c3 0f 1f 40 [ 522.734445] RSP: 0018:ffffc900004f3af0 EFLAGS: 00010282 [ 522.734453] RAX: 0000000000000000 RBX: ffff880106360000 RCX: 0000000000000001 [ 522.734458] RDX: 0000000080000001 RSI: ffffffff820c65c4 RDI: 00000000ffffffff [ 522.734463] RBP: ffff880106360000 R08: 000000009f79baee R09: 0000000000000000 [ 522.734467] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88013b3133f8 [ 522.734472] R13: 00000000ffffffed R14: ffff880106360d58 R15: ffff88013b3133f8 [ 522.734477] FS: 00007f43f70af980(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000 [ 522.734481] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 522.734486] CR2: 000055a13a787580 CR3: 00000001325e6000 CR4: 00000000001006e0 [ 522.734490] Call Trace: [ 522.734595] intel_modeset_cleanup+0xcf/0x140 [i915] [ 522.734682] i915_driver_load+0xc85/0x10a0 [i915] [ 522.734694] ? _raw_spin_unlock_irqrestore+0x4c/0x60 [ 522.734703] ? trace_hardirqs_on_caller+0xe0/0x1b0 [ 522.734790] i915_pci_probe+0x29/0x90 [i915] [ 522.734801] pci_device_probe+0xa1/0x130 [ 522.734813] driver_probe_device+0x306/0x480 [ 522.734824] __driver_attach+0xdb/0x100 [ 522.734830] ? driver_probe_device+0x480/0x480 [ 522.734836] ? driver_probe_device+0x480/0x480 [ 522.734844] bus_for_each_dev+0x74/0xc0 [ 522.734855] bus_add_driver+0x15f/0x250 [ 522.734863] ? 0xffffffffa0793000 [ 522.734870] driver_register+0x56/0xe0 [ 522.734877] ? 0xffffffffa0793000 [ 522.734883] do_one_initcall+0x58/0x370 [ 522.734893] ? do_init_module+0x1d/0x1ea [ 522.734900] ? rcu_read_lock_sched_held+0x6f/0x80 [ 522.734906] ? kmem_cache_alloc_trace+0x282/0x2e0 [ 522.734918] do_init_module+0x56/0x1ea [ 522.734927] load_module+0x2435/0x2b20 [ 522.734965] ? __se_sys_finit_module+0xd3/0xf0 [ 522.734972] __se_sys_finit_module+0xd3/0xf0 [ 522.734995] do_syscall_64+0x55/0x190 [ 522.735003] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 522.735009] RIP: 0033:0x7f43f675d839 [ 522.735014] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 [ 522.735260] RSP: 002b:00007ffe69384238 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 522.735269] RAX: ffffffffffffffda RBX: 000056100e387090 RCX: 00007f43f675d839 [ 522.735273] RDX: 0000000000000000 RSI: 000056100e37bff0 RDI: 0000000000000003 [ 522.735278] RBP: 000056100e37bff0 R08: 0000000000000000 R09: 0000000000000000 [ 522.735282] R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 [ 522.735286] R13: 000056100e37c890 R14: 0000000000000020 R15: 0000000000000027 [ 522.735309] irq event stamp: 1389594 [ 522.735316] hardirqs last enabled at (1389593): [<ffffffff810f896c>] console_unlock+0x3fc/0x600 [ 522.735323] hardirqs last disabled at (1389594): [<ffffffff81a0111c>] error_entry+0x7c/0x100 [ 522.735329] softirqs last enabled at (1389356): [<ffffffff81c0034f>] __do_softirq+0x34f/0x505 [ 522.735336] softirqs last disabled at (1389335): [<ffffffff8108c7b9>] irq_exit+0xa9/0xc0 [ 522.735432] WARNING: CPU: 1 PID: 3856 at drivers/gpu/drm/i915/intel_pm.c:7350 intel_cleanup_gt_powersave+0x5f/0x70 [i915] Testcase: igt/drv_module_reload/basic-reload-inject Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712105454.16091-1-chris@chris-wilson.co.uk
2018-07-12 04:54:54 -06:00
pctx = fetch_and_zero(&dev_priv->vlv_pctx);
if (pctx)
i915_gem_object_put(pctx);
}
static void vlv_init_gpll_ref_freq(struct drm_i915_private *dev_priv)
{
dev_priv->gt_pm.rps.gpll_ref_freq =
vlv_get_cck_clock(dev_priv, "GPLL ref",
CCK_GPLL_CLOCK_CONTROL,
dev_priv->czclk_freq);
DRM_DEBUG_DRIVER("GPLL reference freq: %d kHz\n",
dev_priv->gt_pm.rps.gpll_ref_freq);
}
static void valleyview_init_gt_powersave(struct drm_i915_private *dev_priv)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
u32 val;
valleyview_setup_pctx(dev_priv);
vlv_init_gpll_ref_freq(dev_priv);
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
switch ((val >> 6) & 3) {
case 0:
case 1:
dev_priv->mem_freq = 800;
break;
case 2:
dev_priv->mem_freq = 1066;
break;
case 3:
dev_priv->mem_freq = 1333;
break;
}
DRM_DEBUG_DRIVER("DDR speed: %d MHz\n", dev_priv->mem_freq);
rps->max_freq = valleyview_rps_max_freq(dev_priv);
rps->rp0_freq = rps->max_freq;
DRM_DEBUG_DRIVER("max GPU freq: %d MHz (%u)\n",
intel_gpu_freq(dev_priv, rps->max_freq),
rps->max_freq);
rps->efficient_freq = valleyview_rps_rpe_freq(dev_priv);
DRM_DEBUG_DRIVER("RPe GPU freq: %d MHz (%u)\n",
intel_gpu_freq(dev_priv, rps->efficient_freq),
rps->efficient_freq);
rps->rp1_freq = valleyview_rps_guar_freq(dev_priv);
DRM_DEBUG_DRIVER("RP1(Guar Freq) GPU freq: %d MHz (%u)\n",
intel_gpu_freq(dev_priv, rps->rp1_freq),
rps->rp1_freq);
rps->min_freq = valleyview_rps_min_freq(dev_priv);
DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n",
intel_gpu_freq(dev_priv, rps->min_freq),
rps->min_freq);
}
static void cherryview_init_gt_powersave(struct drm_i915_private *dev_priv)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
u32 val;
cherryview_setup_pctx(dev_priv);
vlv_init_gpll_ref_freq(dev_priv);
mutex_lock(&dev_priv->sb_lock);
val = vlv_cck_read(dev_priv, CCK_FUSE_REG);
mutex_unlock(&dev_priv->sb_lock);
switch ((val >> 2) & 0x7) {
case 3:
dev_priv->mem_freq = 2000;
break;
default:
dev_priv->mem_freq = 1600;
break;
}
DRM_DEBUG_DRIVER("DDR speed: %d MHz\n", dev_priv->mem_freq);
rps->max_freq = cherryview_rps_max_freq(dev_priv);
rps->rp0_freq = rps->max_freq;
DRM_DEBUG_DRIVER("max GPU freq: %d MHz (%u)\n",
intel_gpu_freq(dev_priv, rps->max_freq),
rps->max_freq);
rps->efficient_freq = cherryview_rps_rpe_freq(dev_priv);
DRM_DEBUG_DRIVER("RPe GPU freq: %d MHz (%u)\n",
intel_gpu_freq(dev_priv, rps->efficient_freq),
rps->efficient_freq);
rps->rp1_freq = cherryview_rps_guar_freq(dev_priv);
DRM_DEBUG_DRIVER("RP1(Guar) GPU freq: %d MHz (%u)\n",
intel_gpu_freq(dev_priv, rps->rp1_freq),
rps->rp1_freq);
rps->min_freq = cherryview_rps_min_freq(dev_priv);
DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n",
intel_gpu_freq(dev_priv, rps->min_freq),
rps->min_freq);
WARN_ONCE((rps->max_freq | rps->efficient_freq | rps->rp1_freq |
rps->min_freq) & 1,
"Odd GPU freq values\n");
}
static void valleyview_cleanup_gt_powersave(struct drm_i915_private *dev_priv)
{
valleyview_cleanup_pctx(dev_priv);
}
static void cherryview_enable_rc6(struct drm_i915_private *dev_priv)
{
struct intel_engine_cs *engine;
drm/i915: Allocate intel_engine_cs structure only for the enabled engines With the possibility of addition of many more number of rings in future, the drm_i915_private structure could bloat as an array, of type intel_engine_cs, is embedded inside it. struct intel_engine_cs engine[I915_NUM_ENGINES]; Though this is still fine as generally there is only a single instance of drm_i915_private structure used, but not all of the possible rings would be enabled or active on most of the platforms. Some memory can be saved by allocating intel_engine_cs structure only for the enabled/active engines. Currently the engine/ring ID is kept static and dev_priv->engine[] is simply indexed using the enums defined in intel_engine_id. To save memory and continue using the static engine/ring IDs, 'engine' is defined as an array of pointers. struct intel_engine_cs *engine[I915_NUM_ENGINES]; dev_priv->engine[engine_ID] will be NULL for disabled engine instances. There is a text size reduction of 928 bytes, from 1028200 to 1027272, for i915.o file (but for i915.ko file text size remain same as 1193131 bytes). v2: - Remove the engine iterator field added in drm_i915_private structure, instead pass a local iterator variable to the for_each_engine** macros. (Chris) - Do away with intel_engine_initialized() and instead directly use the NULL pointer check on engine pointer. (Chris) v3: - Remove for_each_engine_id() macro, as the updated macro for_each_engine() can be used in place of it. (Chris) - Protect the access to Render engine Fault register with a NULL check, as engine specific init is done later in Driver load sequence. v4: - Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris) - Kill the superfluous init_engine_lists(). v5: - Cleanup the intel_engines_init() & intel_engines_setup(), with respect to allocation of intel_engine_cs structure. (Chris) v6: - Rebase. v7: - Optimize the for_each_engine_masked() macro. (Chris) - Change the type of 'iter' local variable to enum intel_engine_id. (Chris) - Rebase. v8: Rebase. v9: Rebase. v10: - For index calculation use engine ID instead of pointer based arithmetic in intel_engine_sync_index() as engine pointers are not contiguous now (Chris) - For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas) - Use for_each_engine macro for cleanup in intel_engines_init() and remove check for NULL engine pointer in cleanup() routines. (Joonas) v11: Rebase. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
2016-10-13 11:14:48 -06:00
enum intel_engine_id id;
u32 gtfifodbg, rc6_mode, pcbr;
gtfifodbg = I915_READ(GTFIFODBG) & ~(GT_FIFO_SBDEDICATE_FREE_ENTRY_CHV |
GT_FIFO_FREE_ENTRIES_CHV);
if (gtfifodbg) {
DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n",
gtfifodbg);
I915_WRITE(GTFIFODBG, gtfifodbg);
}
cherryview_check_pctx(dev_priv);
/* 1a & 1b: Get forcewake during program sequence. Although the driver
* hasn't enabled a state yet where we need forcewake, BIOS may have.*/
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* Disable RC states. */
I915_WRITE(GEN6_RC_CONTROL, 0);
/* 2a: Program RC6 thresholds.*/
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
drm/i915: Allocate intel_engine_cs structure only for the enabled engines With the possibility of addition of many more number of rings in future, the drm_i915_private structure could bloat as an array, of type intel_engine_cs, is embedded inside it. struct intel_engine_cs engine[I915_NUM_ENGINES]; Though this is still fine as generally there is only a single instance of drm_i915_private structure used, but not all of the possible rings would be enabled or active on most of the platforms. Some memory can be saved by allocating intel_engine_cs structure only for the enabled/active engines. Currently the engine/ring ID is kept static and dev_priv->engine[] is simply indexed using the enums defined in intel_engine_id. To save memory and continue using the static engine/ring IDs, 'engine' is defined as an array of pointers. struct intel_engine_cs *engine[I915_NUM_ENGINES]; dev_priv->engine[engine_ID] will be NULL for disabled engine instances. There is a text size reduction of 928 bytes, from 1028200 to 1027272, for i915.o file (but for i915.ko file text size remain same as 1193131 bytes). v2: - Remove the engine iterator field added in drm_i915_private structure, instead pass a local iterator variable to the for_each_engine** macros. (Chris) - Do away with intel_engine_initialized() and instead directly use the NULL pointer check on engine pointer. (Chris) v3: - Remove for_each_engine_id() macro, as the updated macro for_each_engine() can be used in place of it. (Chris) - Protect the access to Render engine Fault register with a NULL check, as engine specific init is done later in Driver load sequence. v4: - Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris) - Kill the superfluous init_engine_lists(). v5: - Cleanup the intel_engines_init() & intel_engines_setup(), with respect to allocation of intel_engine_cs structure. (Chris) v6: - Rebase. v7: - Optimize the for_each_engine_masked() macro. (Chris) - Change the type of 'iter' local variable to enum intel_engine_id. (Chris) - Rebase. v8: Rebase. v9: Rebase. v10: - For index calculation use engine ID instead of pointer based arithmetic in intel_engine_sync_index() as engine pointers are not contiguous now (Chris) - For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas) - Use for_each_engine macro for cleanup in intel_engines_init() and remove check for NULL engine pointer in cleanup() routines. (Joonas) v11: Rebase. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
2016-10-13 11:14:48 -06:00
for_each_engine(engine, dev_priv, id)
I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10);
I915_WRITE(GEN6_RC_SLEEP, 0);
/* TO threshold set to 500 us ( 0x186 * 1.28 us) */
I915_WRITE(GEN6_RC6_THRESHOLD, 0x186);
/* Allows RC6 residency counter to work */
I915_WRITE(VLV_COUNTER_CONTROL,
_MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH |
VLV_MEDIA_RC6_COUNT_EN |
VLV_RENDER_RC6_COUNT_EN));
/* For now we assume BIOS is allocating and populating the PCBR */
pcbr = I915_READ(VLV_PCBR);
/* 3: Enable RC6 */
rc6_mode = 0;
if (pcbr >> VLV_PCBR_ADDR_SHIFT)
rc6_mode = GEN7_RC_CTL_TO_MODE;
I915_WRITE(GEN6_RC_CONTROL, rc6_mode);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void cherryview_enable_rps(struct drm_i915_private *dev_priv)
{
u32 val;
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* 1: Program defaults and thresholds for RPS*/
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000);
I915_WRITE(GEN6_RP_UP_EI, 66000);
I915_WRITE(GEN6_RP_DOWN_EI, 350000);
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
/* 2: Enable RPS */
I915_WRITE(GEN6_RP_CONTROL,
GEN6_RP_MEDIA_HW_NORMAL_MODE |
GEN6_RP_MEDIA_IS_GFX |
GEN6_RP_ENABLE |
GEN6_RP_UP_BUSY_AVG |
GEN6_RP_DOWN_IDLE_AVG);
/* Setting Fixed Bias */
val = VLV_OVERRIDE_EN |
VLV_SOC_TDP_EN |
CHV_BIAS_CPU_50_SOC_50;
vlv_punit_write(dev_priv, VLV_TURBO_SOC_OVERRIDE, val);
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
/* RPS code assumes GPLL is used */
WARN_ONCE((val & GPLLENABLE) == 0, "GPLL not enabled\n");
DRM_DEBUG_DRIVER("GPLL enabled? %s\n", yesno(val & GPLLENABLE));
DRM_DEBUG_DRIVER("GPU status: 0x%08x\n", val);
reset_rps(dev_priv, valleyview_set_rps);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void valleyview_enable_rc6(struct drm_i915_private *dev_priv)
{
struct intel_engine_cs *engine;
drm/i915: Allocate intel_engine_cs structure only for the enabled engines With the possibility of addition of many more number of rings in future, the drm_i915_private structure could bloat as an array, of type intel_engine_cs, is embedded inside it. struct intel_engine_cs engine[I915_NUM_ENGINES]; Though this is still fine as generally there is only a single instance of drm_i915_private structure used, but not all of the possible rings would be enabled or active on most of the platforms. Some memory can be saved by allocating intel_engine_cs structure only for the enabled/active engines. Currently the engine/ring ID is kept static and dev_priv->engine[] is simply indexed using the enums defined in intel_engine_id. To save memory and continue using the static engine/ring IDs, 'engine' is defined as an array of pointers. struct intel_engine_cs *engine[I915_NUM_ENGINES]; dev_priv->engine[engine_ID] will be NULL for disabled engine instances. There is a text size reduction of 928 bytes, from 1028200 to 1027272, for i915.o file (but for i915.ko file text size remain same as 1193131 bytes). v2: - Remove the engine iterator field added in drm_i915_private structure, instead pass a local iterator variable to the for_each_engine** macros. (Chris) - Do away with intel_engine_initialized() and instead directly use the NULL pointer check on engine pointer. (Chris) v3: - Remove for_each_engine_id() macro, as the updated macro for_each_engine() can be used in place of it. (Chris) - Protect the access to Render engine Fault register with a NULL check, as engine specific init is done later in Driver load sequence. v4: - Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris) - Kill the superfluous init_engine_lists(). v5: - Cleanup the intel_engines_init() & intel_engines_setup(), with respect to allocation of intel_engine_cs structure. (Chris) v6: - Rebase. v7: - Optimize the for_each_engine_masked() macro. (Chris) - Change the type of 'iter' local variable to enum intel_engine_id. (Chris) - Rebase. v8: Rebase. v9: Rebase. v10: - For index calculation use engine ID instead of pointer based arithmetic in intel_engine_sync_index() as engine pointers are not contiguous now (Chris) - For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas) - Use for_each_engine macro for cleanup in intel_engines_init() and remove check for NULL engine pointer in cleanup() routines. (Joonas) v11: Rebase. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
2016-10-13 11:14:48 -06:00
enum intel_engine_id id;
u32 gtfifodbg;
valleyview_check_pctx(dev_priv);
gtfifodbg = I915_READ(GTFIFODBG);
if (gtfifodbg) {
DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n",
gtfifodbg);
I915_WRITE(GTFIFODBG, gtfifodbg);
}
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
/* Disable RC states. */
I915_WRITE(GEN6_RC_CONTROL, 0);
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 0x00280000);
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
drm/i915: Allocate intel_engine_cs structure only for the enabled engines With the possibility of addition of many more number of rings in future, the drm_i915_private structure could bloat as an array, of type intel_engine_cs, is embedded inside it. struct intel_engine_cs engine[I915_NUM_ENGINES]; Though this is still fine as generally there is only a single instance of drm_i915_private structure used, but not all of the possible rings would be enabled or active on most of the platforms. Some memory can be saved by allocating intel_engine_cs structure only for the enabled/active engines. Currently the engine/ring ID is kept static and dev_priv->engine[] is simply indexed using the enums defined in intel_engine_id. To save memory and continue using the static engine/ring IDs, 'engine' is defined as an array of pointers. struct intel_engine_cs *engine[I915_NUM_ENGINES]; dev_priv->engine[engine_ID] will be NULL for disabled engine instances. There is a text size reduction of 928 bytes, from 1028200 to 1027272, for i915.o file (but for i915.ko file text size remain same as 1193131 bytes). v2: - Remove the engine iterator field added in drm_i915_private structure, instead pass a local iterator variable to the for_each_engine** macros. (Chris) - Do away with intel_engine_initialized() and instead directly use the NULL pointer check on engine pointer. (Chris) v3: - Remove for_each_engine_id() macro, as the updated macro for_each_engine() can be used in place of it. (Chris) - Protect the access to Render engine Fault register with a NULL check, as engine specific init is done later in Driver load sequence. v4: - Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris) - Kill the superfluous init_engine_lists(). v5: - Cleanup the intel_engines_init() & intel_engines_setup(), with respect to allocation of intel_engine_cs structure. (Chris) v6: - Rebase. v7: - Optimize the for_each_engine_masked() macro. (Chris) - Change the type of 'iter' local variable to enum intel_engine_id. (Chris) - Rebase. v8: Rebase. v9: Rebase. v10: - For index calculation use engine ID instead of pointer based arithmetic in intel_engine_sync_index() as engine pointers are not contiguous now (Chris) - For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas) - Use for_each_engine macro for cleanup in intel_engines_init() and remove check for NULL engine pointer in cleanup() routines. (Joonas) v11: Rebase. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
2016-10-13 11:14:48 -06:00
for_each_engine(engine, dev_priv, id)
I915_WRITE(RING_MAX_IDLE(engine->mmio_base), 10);
I915_WRITE(GEN6_RC6_THRESHOLD, 0x557);
/* Allows RC6 residency counter to work */
I915_WRITE(VLV_COUNTER_CONTROL,
_MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH |
VLV_MEDIA_RC0_COUNT_EN |
VLV_RENDER_RC0_COUNT_EN |
VLV_MEDIA_RC6_COUNT_EN |
VLV_RENDER_RC6_COUNT_EN));
I915_WRITE(GEN6_RC_CONTROL,
GEN7_RC_CTL_TO_MODE | VLV_RC_CTL_CTX_RST_PARALLEL);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static void valleyview_enable_rps(struct drm_i915_private *dev_priv)
{
u32 val;
intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000);
I915_WRITE(GEN6_RP_UP_EI, 66000);
I915_WRITE(GEN6_RP_DOWN_EI, 350000);
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
I915_WRITE(GEN6_RP_CONTROL,
GEN6_RP_MEDIA_TURBO |
GEN6_RP_MEDIA_HW_NORMAL_MODE |
GEN6_RP_MEDIA_IS_GFX |
GEN6_RP_ENABLE |
GEN6_RP_UP_BUSY_AVG |
GEN6_RP_DOWN_IDLE_CONT);
/* Setting Fixed Bias */
val = VLV_OVERRIDE_EN |
VLV_SOC_TDP_EN |
VLV_BIAS_CPU_125_SOC_875;
vlv_punit_write(dev_priv, VLV_TURBO_SOC_OVERRIDE, val);
val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
/* RPS code assumes GPLL is used */
WARN_ONCE((val & GPLLENABLE) == 0, "GPLL not enabled\n");
DRM_DEBUG_DRIVER("GPLL enabled? %s\n", yesno(val & GPLLENABLE));
DRM_DEBUG_DRIVER("GPU status: 0x%08x\n", val);
reset_rps(dev_priv, valleyview_set_rps);
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
}
static unsigned long intel_pxfreq(u32 vidfreq)
{
unsigned long freq;
int div = (vidfreq & 0x3f0000) >> 16;
int post = (vidfreq & 0x3000) >> 12;
int pre = (vidfreq & 0x7);
if (!pre)
return 0;
freq = ((div * 133333) / ((1<<post) * pre));
return freq;
}
static const struct cparams {
u16 i;
u16 t;
u16 m;
u16 c;
} cparams[] = {
{ 1, 1333, 301, 28664 },
{ 1, 1066, 294, 24460 },
{ 1, 800, 294, 25192 },
{ 0, 1333, 276, 27605 },
{ 0, 1066, 276, 27605 },
{ 0, 800, 231, 23784 },
};
static unsigned long __i915_chipset_val(struct drm_i915_private *dev_priv)
{
u64 total_count, diff, ret;
u32 count1, count2, count3, m = 0, c = 0;
unsigned long now = jiffies_to_msecs(jiffies), diff1;
int i;
lockdep_assert_held(&mchdev_lock);
diff1 = now - dev_priv->ips.last_time1;
/* Prevent division-by-zero if we are asking too fast.
* Also, we don't get interesting results if we are polling
* faster than once in 10ms, so just return the saved value
* in such cases.
*/
if (diff1 <= 10)
return dev_priv->ips.chipset_power;
count1 = I915_READ(DMIEC);
count2 = I915_READ(DDREC);
count3 = I915_READ(CSIEC);
total_count = count1 + count2 + count3;
/* FIXME: handle per-counter overflow */
if (total_count < dev_priv->ips.last_count1) {
diff = ~0UL - dev_priv->ips.last_count1;
diff += total_count;
} else {
diff = total_count - dev_priv->ips.last_count1;
}
for (i = 0; i < ARRAY_SIZE(cparams); i++) {
if (cparams[i].i == dev_priv->ips.c_m &&
cparams[i].t == dev_priv->ips.r_t) {
m = cparams[i].m;
c = cparams[i].c;
break;
}
}
diff = div_u64(diff, diff1);
ret = ((m * diff) + c);
ret = div_u64(ret, 10);
dev_priv->ips.last_count1 = total_count;
dev_priv->ips.last_time1 = now;
dev_priv->ips.chipset_power = ret;
return ret;
}
unsigned long i915_chipset_val(struct drm_i915_private *dev_priv)
{
unsigned long val;
if (!IS_GEN5(dev_priv))
return 0;
spin_lock_irq(&mchdev_lock);
val = __i915_chipset_val(dev_priv);
spin_unlock_irq(&mchdev_lock);
return val;
}
unsigned long i915_mch_val(struct drm_i915_private *dev_priv)
{
unsigned long m, x, b;
u32 tsfs;
tsfs = I915_READ(TSFS);
m = ((tsfs & TSFS_SLOPE_MASK) >> TSFS_SLOPE_SHIFT);
x = I915_READ8(TR1);
b = tsfs & TSFS_INTR_MASK;
return ((m * x) / 127) - b;
}
static int _pxvid_to_vd(u8 pxvid)
{
if (pxvid == 0)
return 0;
if (pxvid >= 8 && pxvid < 31)
pxvid = 31;
return (pxvid + 2) * 125;
}
static u32 pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid)
{
const int vd = _pxvid_to_vd(pxvid);
const int vm = vd - 1125;
if (INTEL_INFO(dev_priv)->is_mobile)
return vm > 0 ? vm : 0;
return vd;
}
static void __i915_update_gfx_val(struct drm_i915_private *dev_priv)
{
u64 now, diff, diffms;
u32 count;
lockdep_assert_held(&mchdev_lock);
now = ktime_get_raw_ns();
diffms = now - dev_priv->ips.last_time2;
do_div(diffms, NSEC_PER_MSEC);
/* Don't divide by 0 */
if (!diffms)
return;
count = I915_READ(GFXEC);
if (count < dev_priv->ips.last_count2) {
diff = ~0UL - dev_priv->ips.last_count2;
diff += count;
} else {
diff = count - dev_priv->ips.last_count2;
}
dev_priv->ips.last_count2 = count;
dev_priv->ips.last_time2 = now;
/* More magic constants... */
diff = diff * 1181;
diff = div_u64(diff, diffms * 10);
dev_priv->ips.gfx_power = diff;
}
void i915_update_gfx_val(struct drm_i915_private *dev_priv)
{
if (!IS_GEN5(dev_priv))
return;
spin_lock_irq(&mchdev_lock);
__i915_update_gfx_val(dev_priv);
spin_unlock_irq(&mchdev_lock);
}
static unsigned long __i915_gfx_val(struct drm_i915_private *dev_priv)
{
unsigned long t, corr, state1, corr2, state2;
u32 pxvid, ext_v;
lockdep_assert_held(&mchdev_lock);
pxvid = I915_READ(PXVFREQ(dev_priv->gt_pm.rps.cur_freq));
pxvid = (pxvid >> 24) & 0x7f;
ext_v = pvid_to_extvid(dev_priv, pxvid);
state1 = ext_v;
t = i915_mch_val(dev_priv);
/* Revel in the empirically derived constants */
/* Correction factor in 1/100000 units */
if (t > 80)
corr = ((t * 2349) + 135940);
else if (t >= 50)
corr = ((t * 964) + 29317);
else /* < 50 */
corr = ((t * 301) + 1004);
corr = corr * ((150142 * state1) / 10000 - 78642);
corr /= 100000;
corr2 = (corr * dev_priv->ips.corr);
state2 = (corr2 * state1) / 10000;
state2 /= 100; /* convert to mW */
__i915_update_gfx_val(dev_priv);
return dev_priv->ips.gfx_power + state2;
}
unsigned long i915_gfx_val(struct drm_i915_private *dev_priv)
{
unsigned long val;
if (!IS_GEN5(dev_priv))
return 0;
spin_lock_irq(&mchdev_lock);
val = __i915_gfx_val(dev_priv);
spin_unlock_irq(&mchdev_lock);
return val;
}
/**
* i915_read_mch_val - return value for IPS use
*
* Calculate and return a value for the IPS driver to use when deciding whether
* we have thermal and power headroom to increase CPU or GPU power budget.
*/
unsigned long i915_read_mch_val(void)
{
struct drm_i915_private *dev_priv;
unsigned long chipset_val, graphics_val, ret = 0;
spin_lock_irq(&mchdev_lock);
if (!i915_mch_dev)
goto out_unlock;
dev_priv = i915_mch_dev;
chipset_val = __i915_chipset_val(dev_priv);
graphics_val = __i915_gfx_val(dev_priv);
ret = chipset_val + graphics_val;
out_unlock:
spin_unlock_irq(&mchdev_lock);
return ret;
}
EXPORT_SYMBOL_GPL(i915_read_mch_val);
/**
* i915_gpu_raise - raise GPU frequency limit
*
* Raise the limit; IPS indicates we have thermal headroom.
*/
bool i915_gpu_raise(void)
{
struct drm_i915_private *dev_priv;
bool ret = true;
spin_lock_irq(&mchdev_lock);
if (!i915_mch_dev) {
ret = false;
goto out_unlock;
}
dev_priv = i915_mch_dev;
if (dev_priv->ips.max_delay > dev_priv->ips.fmax)
dev_priv->ips.max_delay--;
out_unlock:
spin_unlock_irq(&mchdev_lock);
return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_raise);
/**
* i915_gpu_lower - lower GPU frequency limit
*
* IPS indicates we're close to a thermal limit, so throttle back the GPU
* frequency maximum.
*/
bool i915_gpu_lower(void)
{
struct drm_i915_private *dev_priv;
bool ret = true;
spin_lock_irq(&mchdev_lock);
if (!i915_mch_dev) {
ret = false;
goto out_unlock;
}
dev_priv = i915_mch_dev;
if (dev_priv->ips.max_delay < dev_priv->ips.min_delay)
dev_priv->ips.max_delay++;
out_unlock:
spin_unlock_irq(&mchdev_lock);
return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_lower);
/**
* i915_gpu_busy - indicate GPU business to IPS
*
* Tell the IPS driver whether or not the GPU is busy.
*/
bool i915_gpu_busy(void)
{
bool ret = false;
spin_lock_irq(&mchdev_lock);
if (i915_mch_dev)
ret = i915_mch_dev->gt.awake;
spin_unlock_irq(&mchdev_lock);
return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_busy);
/**
* i915_gpu_turbo_disable - disable graphics turbo
*
* Disable graphics turbo by resetting the max frequency and setting the
* current frequency to the default.
*/
bool i915_gpu_turbo_disable(void)
{
struct drm_i915_private *dev_priv;
bool ret = true;
spin_lock_irq(&mchdev_lock);
if (!i915_mch_dev) {
ret = false;
goto out_unlock;
}
dev_priv = i915_mch_dev;
dev_priv->ips.max_delay = dev_priv->ips.fstart;
drm/i915: Small display interrupt handlers tidy I have noticed some of our interrupt handlers use both dev and dev_priv while they could get away with only dev_priv in the huge majority of cases. Tidying that up had a cascading effect on changing functions prototypes, so relatively big churn factor, but I think it is for the better. For example even where changes cascade out of i915_irq.c, for functions prefixed with intel_, genX_ or <plat>_, it makes more sense to take dev_priv directly anyway. This allows us to eliminate local variables and intermixed usage of dev and dev_priv where only one is good enough. End result is shrinkage of both source and the resulting binary. i915.ko: - .text 000b0899 + .text 000b0619 Or if we look at the Gen8 display irq chain: -00000000000006ad t gen8_irq_handler +0000000000000663 t gen8_irq_handler -0000000000000028 T intel_opregion_asle_intr +0000000000000024 T intel_opregion_asle_intr -000000000000008c t ilk_hpd_irq_handler +000000000000007f t ilk_hpd_irq_handler -0000000000000116 T intel_check_page_flip +0000000000000112 T intel_check_page_flip -000000000000011a T intel_prepare_page_flip +0000000000000119 T intel_prepare_page_flip -0000000000000014 T intel_finish_page_flip_plane +0000000000000013 T intel_finish_page_flip_plane -0000000000000053 t hsw_pipe_crc_irq_handler +000000000000004c t hsw_pipe_crc_irq_handler -000000000000022e t cpt_irq_handler +0000000000000213 t cpt_irq_handler So small shrinkage but it is all fast paths so doesn't harm. Situation is similar in other interrupt handlers as well. v2: Tidy intel_queue_rps_boost_for_request as well. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-05-06 07:48:28 -06:00
if (!ironlake_set_drps(dev_priv, dev_priv->ips.fstart))
ret = false;
out_unlock:
spin_unlock_irq(&mchdev_lock);
return ret;
}
EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable);
/**
* Tells the intel_ips driver that the i915 driver is now loaded, if
* IPS got loaded first.
*
* This awkward dance is so that neither module has to depend on the
* other in order for IPS to do the appropriate communication of
* GPU turbo limits to i915.
*/
static void
ips_ping_for_i915_load(void)
{
void (*link)(void);
link = symbol_get(ips_link_to_i915_driver);
if (link) {
link();
symbol_put(ips_link_to_i915_driver);
}
}
void intel_gpu_ips_init(struct drm_i915_private *dev_priv)
{
/* We only register the i915 ips part with intel-ips once everything is
* set up, to avoid intel-ips sneaking in and reading bogus values. */
spin_lock_irq(&mchdev_lock);
i915_mch_dev = dev_priv;
spin_unlock_irq(&mchdev_lock);
ips_ping_for_i915_load();
}
void intel_gpu_ips_teardown(void)
{
spin_lock_irq(&mchdev_lock);
i915_mch_dev = NULL;
spin_unlock_irq(&mchdev_lock);
}
static void intel_init_emon(struct drm_i915_private *dev_priv)
{
u32 lcfuse;
u8 pxw[16];
int i;
/* Disable to program */
I915_WRITE(ECR, 0);
POSTING_READ(ECR);
/* Program energy weights for various events */
I915_WRITE(SDEW, 0x15040d00);
I915_WRITE(CSIEW0, 0x007f0000);
I915_WRITE(CSIEW1, 0x1e220004);
I915_WRITE(CSIEW2, 0x04000004);
for (i = 0; i < 5; i++)
I915_WRITE(PEW(i), 0);
for (i = 0; i < 3; i++)
I915_WRITE(DEW(i), 0);
/* Program P-state weights to account for frequency power adjustment */
for (i = 0; i < 16; i++) {
u32 pxvidfreq = I915_READ(PXVFREQ(i));
unsigned long freq = intel_pxfreq(pxvidfreq);
unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >>
PXVFREQ_PX_SHIFT;
unsigned long val;
val = vid * vid;
val *= (freq / 1000);
val *= 255;
val /= (127*127*900);
if (val > 0xff)
DRM_ERROR("bad pxval: %ld\n", val);
pxw[i] = val;
}
/* Render standby states get 0 weight */
pxw[14] = 0;
pxw[15] = 0;
for (i = 0; i < 4; i++) {
u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) |
(pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]);
I915_WRITE(PXW(i), val);
}
/* Adjust magic regs to magic values (more experimental results) */
I915_WRITE(OGW0, 0);
I915_WRITE(OGW1, 0);
I915_WRITE(EG0, 0x00007f00);
I915_WRITE(EG1, 0x0000000e);
I915_WRITE(EG2, 0x000e0000);
I915_WRITE(EG3, 0x68000300);
I915_WRITE(EG4, 0x42000000);
I915_WRITE(EG5, 0x00140031);
I915_WRITE(EG6, 0);
I915_WRITE(EG7, 0);
for (i = 0; i < 8; i++)
I915_WRITE(PXWL(i), 0);
/* Enable PMON + select events */
I915_WRITE(ECR, 0x80000019);
lcfuse = I915_READ(LCFUSE02);
dev_priv->ips.corr = (lcfuse & LCFUSE_HIV_MASK);
}
void intel_init_gt_powersave(struct drm_i915_private *dev_priv)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
/*
* RPM depends on RC6 to save restore the GT HW context, so make RC6 a
* requirement.
*/
if (!sanitize_rc6(dev_priv)) {
DRM_INFO("RC6 disabled, disabling runtime PM support\n");
pm_runtime_get(&dev_priv->drm.pdev->dev);
}
mutex_lock(&dev_priv->pcu_lock);
/* Initialize RPS limits (for userspace) */
if (IS_CHERRYVIEW(dev_priv))
cherryview_init_gt_powersave(dev_priv);
else if (IS_VALLEYVIEW(dev_priv))
valleyview_init_gt_powersave(dev_priv);
else if (INTEL_GEN(dev_priv) >= 6)
gen6_init_rps_frequencies(dev_priv);
/* Derive initial user preferences/limits from the hardware limits */
rps->idle_freq = rps->min_freq;
rps->cur_freq = rps->idle_freq;
rps->max_freq_softlimit = rps->max_freq;
rps->min_freq_softlimit = rps->min_freq;
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
rps->min_freq_softlimit =
max_t(int,
rps->efficient_freq,
intel_freq_opcode(dev_priv, 450));
/* After setting max-softlimit, find the overclock max freq */
if (IS_GEN6(dev_priv) ||
IS_IVYBRIDGE(dev_priv) || IS_HASWELL(dev_priv)) {
u32 params = 0;
sandybridge_pcode_read(dev_priv, GEN6_READ_OC_PARAMS, &params);
if (params & BIT(31)) { /* OC supported */
DRM_DEBUG_DRIVER("Overclocking supported, max: %dMHz, overclock: %dMHz\n",
(rps->max_freq & 0xff) * 50,
(params & 0xff) * 50);
rps->max_freq = params & 0xff;
}
}
/* Finally allow us to boost to max by default */
rps->boost_freq = rps->max_freq;
mutex_unlock(&dev_priv->pcu_lock);
}
void intel_cleanup_gt_powersave(struct drm_i915_private *dev_priv)
{
if (IS_VALLEYVIEW(dev_priv))
valleyview_cleanup_gt_powersave(dev_priv);
if (!HAS_RC6(dev_priv))
pm_runtime_put(&dev_priv->drm.pdev->dev);
}
/**
* intel_suspend_gt_powersave - suspend PM work and helper threads
* @dev_priv: i915 device
*
* We don't want to disable RC6 or other features here, we just want
* to make sure any work we've queued has finished and won't bother
* us while we're suspended.
*/
void intel_suspend_gt_powersave(struct drm_i915_private *dev_priv)
{
if (INTEL_GEN(dev_priv) < 6)
return;
/* gen6_rps_idle() will be called later to disable interrupts */
}
void intel_sanitize_gt_powersave(struct drm_i915_private *dev_priv)
{
dev_priv->gt_pm.rps.enabled = true; /* force RPS disabling */
dev_priv->gt_pm.rc6.enabled = true; /* force RC6 disabling */
intel_disable_gt_powersave(dev_priv);
if (INTEL_GEN(dev_priv) >= 11)
gen11_reset_rps_interrupts(dev_priv);
else if (INTEL_GEN(dev_priv) >= 6)
gen6_reset_rps_interrupts(dev_priv);
}
static inline void intel_disable_llc_pstate(struct drm_i915_private *i915)
{
lockdep_assert_held(&i915->pcu_lock);
if (!i915->gt_pm.llc_pstate.enabled)
return;
/* Currently there is no HW configuration to be done to disable. */
i915->gt_pm.llc_pstate.enabled = false;
}
static void intel_disable_rc6(struct drm_i915_private *dev_priv)
{
lockdep_assert_held(&dev_priv->pcu_lock);
if (!dev_priv->gt_pm.rc6.enabled)
return;
if (INTEL_GEN(dev_priv) >= 9)
gen9_disable_rc6(dev_priv);
else if (IS_CHERRYVIEW(dev_priv))
cherryview_disable_rc6(dev_priv);
else if (IS_VALLEYVIEW(dev_priv))
valleyview_disable_rc6(dev_priv);
else if (INTEL_GEN(dev_priv) >= 6)
gen6_disable_rc6(dev_priv);
dev_priv->gt_pm.rc6.enabled = false;
}
static void intel_disable_rps(struct drm_i915_private *dev_priv)
{
lockdep_assert_held(&dev_priv->pcu_lock);
if (!dev_priv->gt_pm.rps.enabled)
return;
if (INTEL_GEN(dev_priv) >= 9)
gen9_disable_rps(dev_priv);
else if (IS_CHERRYVIEW(dev_priv))
cherryview_disable_rps(dev_priv);
else if (IS_VALLEYVIEW(dev_priv))
valleyview_disable_rps(dev_priv);
else if (INTEL_GEN(dev_priv) >= 6)
gen6_disable_rps(dev_priv);
else if (IS_IRONLAKE_M(dev_priv))
ironlake_disable_drps(dev_priv);
dev_priv->gt_pm.rps.enabled = false;
}
void intel_disable_gt_powersave(struct drm_i915_private *dev_priv)
{
mutex_lock(&dev_priv->pcu_lock);
intel_disable_rc6(dev_priv);
intel_disable_rps(dev_priv);
if (HAS_LLC(dev_priv))
intel_disable_llc_pstate(dev_priv);
mutex_unlock(&dev_priv->pcu_lock);
}
static inline void intel_enable_llc_pstate(struct drm_i915_private *i915)
{
lockdep_assert_held(&i915->pcu_lock);
if (i915->gt_pm.llc_pstate.enabled)
return;
gen6_update_ring_freq(i915);
i915->gt_pm.llc_pstate.enabled = true;
}
static void intel_enable_rc6(struct drm_i915_private *dev_priv)
{
lockdep_assert_held(&dev_priv->pcu_lock);
if (dev_priv->gt_pm.rc6.enabled)
return;
if (IS_CHERRYVIEW(dev_priv))
cherryview_enable_rc6(dev_priv);
else if (IS_VALLEYVIEW(dev_priv))
valleyview_enable_rc6(dev_priv);
else if (INTEL_GEN(dev_priv) >= 9)
gen9_enable_rc6(dev_priv);
else if (IS_BROADWELL(dev_priv))
gen8_enable_rc6(dev_priv);
else if (INTEL_GEN(dev_priv) >= 6)
gen6_enable_rc6(dev_priv);
dev_priv->gt_pm.rc6.enabled = true;
}
static void intel_enable_rps(struct drm_i915_private *dev_priv)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
lockdep_assert_held(&dev_priv->pcu_lock);
if (rps->enabled)
return;
if (IS_CHERRYVIEW(dev_priv)) {
cherryview_enable_rps(dev_priv);
} else if (IS_VALLEYVIEW(dev_priv)) {
valleyview_enable_rps(dev_priv);
} else if (INTEL_GEN(dev_priv) >= 9) {
gen9_enable_rps(dev_priv);
} else if (IS_BROADWELL(dev_priv)) {
gen8_enable_rps(dev_priv);
} else if (INTEL_GEN(dev_priv) >= 6) {
gen6_enable_rps(dev_priv);
} else if (IS_IRONLAKE_M(dev_priv)) {
ironlake_enable_drps(dev_priv);
intel_init_emon(dev_priv);
}
WARN_ON(rps->max_freq < rps->min_freq);
WARN_ON(rps->idle_freq > rps->max_freq);
WARN_ON(rps->efficient_freq < rps->min_freq);
WARN_ON(rps->efficient_freq > rps->max_freq);
rps->enabled = true;
}
void intel_enable_gt_powersave(struct drm_i915_private *dev_priv)
{
/* Powersaving is controlled by the host when inside a VM */
if (intel_vgpu_active(dev_priv))
return;
mutex_lock(&dev_priv->pcu_lock);
if (HAS_RC6(dev_priv))
intel_enable_rc6(dev_priv);
intel_enable_rps(dev_priv);
if (HAS_LLC(dev_priv))
intel_enable_llc_pstate(dev_priv);
mutex_unlock(&dev_priv->pcu_lock);
}
static void ibx_init_clock_gating(struct drm_i915_private *dev_priv)
{
/*
* On Ibex Peak and Cougar Point, we need to disable clock
* gating for the panel power sequencer or it will fail to
* start up when no ports are active.
*/
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
}
static void g4x_disable_trickle_feed(struct drm_i915_private *dev_priv)
{
enum pipe pipe;
for_each_pipe(dev_priv, pipe) {
I915_WRITE(DSPCNTR(pipe),
I915_READ(DSPCNTR(pipe)) |
DISPPLANE_TRICKLE_FEED_DISABLE);
I915_WRITE(DSPSURF(pipe), I915_READ(DSPSURF(pipe)));
POSTING_READ(DSPSURF(pipe));
}
}
static void ilk_init_clock_gating(struct drm_i915_private *dev_priv)
{
drm/i915: Consolidate ILK_DSPCLK_GATE and PCH_DSPCLK_GATE Register 0x42020 was defined twice under the names PCH_DSPCLK_GATE_D and ILK_DSPCLK_GATE. This patch consolidate the 2 sets of defines in one. The transforms done are: PCH_DSPCLK_GATE_D -> ILK_DSPCLK_GATE_D ILK_DSPCLK_GATE -> ILK_DSPCLK_GATE_D DPARBUNIT_CLOCK_GATE_DISABLE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE ILK_DPARB_CLK_GATE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE DPFDUNIT_CLOCK_GATE_DISABLE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_DPFD_CLK_GATE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_CLK_FBC -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE DPFCRUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS1 -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE DPFCUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS2 -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE We have a VHRUNIT_CLOCK_GATE_DISABLE define for the pre-ILK DSPCLK_GATE_D. Even if the same bit is used in ILK_DSPCLK_GATE_D, other bits in the register change, so I went with re-defining it, well more precisely rename IVB_VRHUNIT_CLK_GATE, which is not specific to IVB+. So: IVB_VRHUNIT_CLK_GATE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE VHRUNIT_CLOCK_GATE_DISABLE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE (ILK+ code) This commit is only a renaming commit, further commits will clean up the logic. v2: Rename bit 5 and 7 to _ENABLE as setting them to 1 enables clock gating on their respective units, contrary to all of the other bits (Paulo Zanoni) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-19 10:55:41 -06:00
uint32_t dspclk_gate = ILK_VRHUNIT_CLOCK_GATE_DISABLE;
/*
* Required for FBC
* WaFbcDisableDpfcClockGating:ilk
*/
dspclk_gate |= ILK_DPFCRUNIT_CLOCK_GATE_DISABLE |
ILK_DPFCUNIT_CLOCK_GATE_DISABLE |
ILK_DPFDUNIT_CLOCK_GATE_ENABLE;
I915_WRITE(PCH_3DCGDIS0,
MARIUNIT_CLOCK_GATE_DISABLE |
SVSMUNIT_CLOCK_GATE_DISABLE);
I915_WRITE(PCH_3DCGDIS1,
VFMUNIT_CLOCK_GATE_DISABLE);
/*
* According to the spec the following bits should be set in
* order to enable memory self-refresh
* The bit 22/21 of 0x42004
* The bit 5 of 0x42020
* The bit 15 of 0x45000
*/
I915_WRITE(ILK_DISPLAY_CHICKEN2,
(I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_DPARB_GATE | ILK_VSDPFD_FULL));
dspclk_gate |= ILK_DPARBUNIT_CLOCK_GATE_ENABLE;
I915_WRITE(DISP_ARB_CTL,
(I915_READ(DISP_ARB_CTL) |
DISP_FBC_WM_DIS));
/*
* Based on the document from hardware guys the following bits
* should be set unconditionally in order to enable FBC.
* The bit 22 of 0x42000
* The bit 22 of 0x42004
* The bit 7,8,9 of 0x42020.
*/
if (IS_IRONLAKE_M(dev_priv)) {
/* WaFbcAsynchFlipDisableFbcQueue:ilk */
I915_WRITE(ILK_DISPLAY_CHICKEN1,
I915_READ(ILK_DISPLAY_CHICKEN1) |
ILK_FBCQ_DIS);
I915_WRITE(ILK_DISPLAY_CHICKEN2,
I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_DPARB_GATE);
}
I915_WRITE(ILK_DSPCLK_GATE_D, dspclk_gate);
I915_WRITE(ILK_DISPLAY_CHICKEN2,
I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_ELPIN_409_SELECT);
I915_WRITE(_3D_CHICKEN2,
_3D_CHICKEN2_WM_READ_PIPELINED << 16 |
_3D_CHICKEN2_WM_READ_PIPELINED);
/* WaDisableRenderCachePipelinedFlush:ilk */
I915_WRITE(CACHE_MODE_0,
_MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE));
/* WaDisable_RenderCache_OperationalFlush:ilk */
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
g4x_disable_trickle_feed(dev_priv);
ibx_init_clock_gating(dev_priv);
}
static void cpt_init_clock_gating(struct drm_i915_private *dev_priv)
{
int pipe;
uint32_t val;
/*
* On Ibex Peak and Cougar Point, we need to disable clock
* gating for the panel power sequencer or it will fail to
* start up when no ports are active.
*/
I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE |
PCH_DPLUNIT_CLOCK_GATE_DISABLE |
PCH_CPUNIT_CLOCK_GATE_DISABLE);
I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) |
DPLS_EDP_PPS_FIX_DIS);
/* The below fixes the weird display corruption, a few pixels shifted
* downward, on (only) LVDS of some HP laptops with IVY.
*/
for_each_pipe(dev_priv, pipe) {
val = I915_READ(TRANS_CHICKEN2(pipe));
val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
val &= ~TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
if (dev_priv->vbt.fdi_rx_polarity_inverted)
val |= TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK;
val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER;
val &= ~TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH;
I915_WRITE(TRANS_CHICKEN2(pipe), val);
}
/* WADP0ClockGatingDisable */
for_each_pipe(dev_priv, pipe) {
I915_WRITE(TRANS_CHICKEN1(pipe),
TRANS_CHICKEN1_DP0UNIT_GC_DISABLE);
}
}
static void gen6_check_mch_setup(struct drm_i915_private *dev_priv)
{
uint32_t tmp;
tmp = I915_READ(MCH_SSKPD);
if ((tmp & MCH_SSKPD_WM0_MASK) != MCH_SSKPD_WM0_VAL)
DRM_DEBUG_KMS("Wrong MCH_SSKPD value: 0x%08x This can cause underruns.\n",
tmp);
}
static void gen6_init_clock_gating(struct drm_i915_private *dev_priv)
{
drm/i915: Consolidate ILK_DSPCLK_GATE and PCH_DSPCLK_GATE Register 0x42020 was defined twice under the names PCH_DSPCLK_GATE_D and ILK_DSPCLK_GATE. This patch consolidate the 2 sets of defines in one. The transforms done are: PCH_DSPCLK_GATE_D -> ILK_DSPCLK_GATE_D ILK_DSPCLK_GATE -> ILK_DSPCLK_GATE_D DPARBUNIT_CLOCK_GATE_DISABLE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE ILK_DPARB_CLK_GATE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE DPFDUNIT_CLOCK_GATE_DISABLE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_DPFD_CLK_GATE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_CLK_FBC -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE DPFCRUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS1 -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE DPFCUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS2 -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE We have a VHRUNIT_CLOCK_GATE_DISABLE define for the pre-ILK DSPCLK_GATE_D. Even if the same bit is used in ILK_DSPCLK_GATE_D, other bits in the register change, so I went with re-defining it, well more precisely rename IVB_VRHUNIT_CLK_GATE, which is not specific to IVB+. So: IVB_VRHUNIT_CLK_GATE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE VHRUNIT_CLOCK_GATE_DISABLE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE (ILK+ code) This commit is only a renaming commit, further commits will clean up the logic. v2: Rename bit 5 and 7 to _ENABLE as setting them to 1 enables clock gating on their respective units, contrary to all of the other bits (Paulo Zanoni) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-19 10:55:41 -06:00
uint32_t dspclk_gate = ILK_VRHUNIT_CLOCK_GATE_DISABLE;
drm/i915: Consolidate ILK_DSPCLK_GATE and PCH_DSPCLK_GATE Register 0x42020 was defined twice under the names PCH_DSPCLK_GATE_D and ILK_DSPCLK_GATE. This patch consolidate the 2 sets of defines in one. The transforms done are: PCH_DSPCLK_GATE_D -> ILK_DSPCLK_GATE_D ILK_DSPCLK_GATE -> ILK_DSPCLK_GATE_D DPARBUNIT_CLOCK_GATE_DISABLE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE ILK_DPARB_CLK_GATE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE DPFDUNIT_CLOCK_GATE_DISABLE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_DPFD_CLK_GATE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_CLK_FBC -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE DPFCRUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS1 -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE DPFCUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS2 -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE We have a VHRUNIT_CLOCK_GATE_DISABLE define for the pre-ILK DSPCLK_GATE_D. Even if the same bit is used in ILK_DSPCLK_GATE_D, other bits in the register change, so I went with re-defining it, well more precisely rename IVB_VRHUNIT_CLK_GATE, which is not specific to IVB+. So: IVB_VRHUNIT_CLK_GATE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE VHRUNIT_CLOCK_GATE_DISABLE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE (ILK+ code) This commit is only a renaming commit, further commits will clean up the logic. v2: Rename bit 5 and 7 to _ENABLE as setting them to 1 enables clock gating on their respective units, contrary to all of the other bits (Paulo Zanoni) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-19 10:55:41 -06:00
I915_WRITE(ILK_DSPCLK_GATE_D, dspclk_gate);
I915_WRITE(ILK_DISPLAY_CHICKEN2,
I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_ELPIN_409_SELECT);
/* WaDisableHiZPlanesWhenMSAAEnabled:snb */
I915_WRITE(_3D_CHICKEN,
_MASKED_BIT_ENABLE(_3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB));
/* WaDisable_RenderCache_OperationalFlush:snb */
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
/*
* BSpec recoomends 8x4 when MSAA is used,
* however in practice 16x4 seems fastest.
*
* Note that PS/WM thread counts depend on the WIZ hashing
* disable bit, which we don't touch here, but it's good
* to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
*/
I915_WRITE(GEN6_GT_MODE,
drm/i915/bdw: Fix the write setting up the WIZ hashing mode I was playing with clang and oh surprise! a warning trigerred by -Wshift-overflow (gcc doesn't have this one): WA_SET_BIT_MASKED(GEN7_GT_MODE, GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4); drivers/gpu/drm/i915/intel_ringbuffer.c:786:2: warning: signed shift result (0x28002000000) requires 43 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] WA_SET_BIT_MASKED(GEN7_GT_MODE, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/intel_ringbuffer.c:737:15: note: expanded from macro 'WA_SET_BIT_MASKED' WA_REG(addr, _MASKED_BIT_ENABLE(mask), (mask) & 0xffff) Turned out GEN6_WIZ_HASHING_MASK was already shifted by 16, and we were trying to shift it a bit more. The other thing is that it's not the usual case of setting WA bits here, we need to have separate mask and value. To fix this, I've introduced a new _MASKED_FIELD() macro that takes both the (unshifted) mask and the desired value and the rest of the patch ripples through from it. This bug was introduced when reworking the WA emission in: Commit 7225342ab501befdb64bcec76ded41f5897c0855 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Oct 7 17:21:26 2014 +0300 drm/i915: Build workaround list in ring initialization v2: Invert the order of the mask and value arguments (Daniel Vetter) Rewrite _MASKED_BIT_ENABLE() and _MASKED_BIT_DISABLE() with _MASKED_FIELD() (Jani Nikula) Make sure we only evaluate 'a' once in _MASKED_BIT_ENABLE() (Dave Gordon) Add check to ensure the value is within the mask boundaries (Chris Wilson) v3: Ensure the the value and mask are 16 bits (Dave Gordon) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-08 10:33:51 -07:00
_MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4));
I915_WRITE(CACHE_MODE_0,
_MASKED_BIT_DISABLE(CM0_STC_EVICT_DISABLE_LRA_SNB));
I915_WRITE(GEN6_UCGCTL1,
I915_READ(GEN6_UCGCTL1) |
GEN6_BLBUNIT_CLOCK_GATE_DISABLE |
GEN6_CSUNIT_CLOCK_GATE_DISABLE);
/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
* gating disable must be set. Failure to set it results in
* flickering pixels due to Z write ordering failures after
* some amount of runtime in the Mesa "fire" demo, and Unigine
* Sanctuary and Tropics, and apparently anything else with
* alpha test or pixel discard.
*
* According to the spec, bit 11 (RCCUNIT) must also be set,
* but we didn't debug actual testcases to find it out.
*
* WaDisableRCCUnitClockGating:snb
* WaDisableRCPBUnitClockGating:snb
*/
I915_WRITE(GEN6_UCGCTL2,
GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
/* WaStripsFansDisableFastClipPerformanceFix:snb */
I915_WRITE(_3D_CHICKEN3,
_MASKED_BIT_ENABLE(_3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL));
/*
* Bspec says:
* "This bit must be set if 3DSTATE_CLIP clip mode is set to normal and
* 3DSTATE_SF number of SF output attributes is more than 16."
*/
I915_WRITE(_3D_CHICKEN3,
_MASKED_BIT_ENABLE(_3D_CHICKEN3_SF_DISABLE_PIPELINED_ATTR_FETCH));
/*
* According to the spec the following bits should be
* set in order to enable memory self-refresh and fbc:
* The bit21 and bit22 of 0x42000
* The bit21 and bit22 of 0x42004
* The bit5 and bit7 of 0x42020
* The bit14 of 0x70180
* The bit14 of 0x71180
*
* WaFbcAsynchFlipDisableFbcQueue:snb
*/
I915_WRITE(ILK_DISPLAY_CHICKEN1,
I915_READ(ILK_DISPLAY_CHICKEN1) |
ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS);
I915_WRITE(ILK_DISPLAY_CHICKEN2,
I915_READ(ILK_DISPLAY_CHICKEN2) |
ILK_DPARB_GATE | ILK_VSDPFD_FULL);
drm/i915: Consolidate ILK_DSPCLK_GATE and PCH_DSPCLK_GATE Register 0x42020 was defined twice under the names PCH_DSPCLK_GATE_D and ILK_DSPCLK_GATE. This patch consolidate the 2 sets of defines in one. The transforms done are: PCH_DSPCLK_GATE_D -> ILK_DSPCLK_GATE_D ILK_DSPCLK_GATE -> ILK_DSPCLK_GATE_D DPARBUNIT_CLOCK_GATE_DISABLE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE ILK_DPARB_CLK_GATE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE DPFDUNIT_CLOCK_GATE_DISABLE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_DPFD_CLK_GATE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_CLK_FBC -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE DPFCRUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS1 -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE DPFCUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS2 -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE We have a VHRUNIT_CLOCK_GATE_DISABLE define for the pre-ILK DSPCLK_GATE_D. Even if the same bit is used in ILK_DSPCLK_GATE_D, other bits in the register change, so I went with re-defining it, well more precisely rename IVB_VRHUNIT_CLK_GATE, which is not specific to IVB+. So: IVB_VRHUNIT_CLK_GATE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE VHRUNIT_CLOCK_GATE_DISABLE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE (ILK+ code) This commit is only a renaming commit, further commits will clean up the logic. v2: Rename bit 5 and 7 to _ENABLE as setting them to 1 enables clock gating on their respective units, contrary to all of the other bits (Paulo Zanoni) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-19 10:55:41 -06:00
I915_WRITE(ILK_DSPCLK_GATE_D,
I915_READ(ILK_DSPCLK_GATE_D) |
ILK_DPARBUNIT_CLOCK_GATE_ENABLE |
ILK_DPFDUNIT_CLOCK_GATE_ENABLE);
g4x_disable_trickle_feed(dev_priv);
cpt_init_clock_gating(dev_priv);
gen6_check_mch_setup(dev_priv);
}
static void gen7_setup_fixed_func_scheduler(struct drm_i915_private *dev_priv)
{
uint32_t reg = I915_READ(GEN7_FF_THREAD_MODE);
/*
* WaVSThreadDispatchOverride:ivb,vlv
*
* This actually overrides the dispatch
* mode for all thread types.
*/
reg &= ~GEN7_FF_SCHED_MASK;
reg |= GEN7_FF_TS_SCHED_HW;
reg |= GEN7_FF_VS_SCHED_HW;
reg |= GEN7_FF_DS_SCHED_HW;
I915_WRITE(GEN7_FF_THREAD_MODE, reg);
}
static void lpt_init_clock_gating(struct drm_i915_private *dev_priv)
{
/*
* TODO: this bit should only be enabled when really needed, then
* disabled when not needed anymore in order to save power.
*/
if (HAS_PCH_LPT_LP(dev_priv))
I915_WRITE(SOUTH_DSPCLK_GATE_D,
I915_READ(SOUTH_DSPCLK_GATE_D) |
PCH_LP_PARTITION_LEVEL_DISABLE);
/* WADPOClockGatingDisable:hsw */
I915_WRITE(TRANS_CHICKEN1(PIPE_A),
I915_READ(TRANS_CHICKEN1(PIPE_A)) |
TRANS_CHICKEN1_DP0UNIT_GC_DISABLE);
}
static void lpt_suspend_hw(struct drm_i915_private *dev_priv)
{
if (HAS_PCH_LPT_LP(dev_priv)) {
uint32_t val = I915_READ(SOUTH_DSPCLK_GATE_D);
val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
}
}
static void gen8_set_l3sqc_credits(struct drm_i915_private *dev_priv,
int general_prio_credits,
int high_prio_credits)
{
u32 misccpctl;
u32 val;
/* WaTempDisableDOPClkGating:bdw */
misccpctl = I915_READ(GEN7_MISCCPCTL);
I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
val = I915_READ(GEN8_L3SQCREG1);
val &= ~L3_PRIO_CREDITS_MASK;
val |= L3_GENERAL_PRIO_CREDITS(general_prio_credits);
val |= L3_HIGH_PRIO_CREDITS(high_prio_credits);
I915_WRITE(GEN8_L3SQCREG1, val);
/*
* Wait at least 100 clocks before re-enabling clock gating.
* See the definition of L3SQCREG1 in BSpec.
*/
POSTING_READ(GEN8_L3SQCREG1);
udelay(1);
I915_WRITE(GEN7_MISCCPCTL, misccpctl);
}
static void icl_init_clock_gating(struct drm_i915_private *dev_priv)
{
/* This is not an Wa. Enable to reduce Sampler power */
I915_WRITE(GEN10_DFR_RATIO_EN_AND_CHICKEN,
I915_READ(GEN10_DFR_RATIO_EN_AND_CHICKEN) & ~DFR_DISABLE);
/* WaEnable32PlaneMode:icl */
I915_WRITE(GEN9_CSFE_CHICKEN1_RCS,
_MASKED_BIT_ENABLE(GEN11_ENABLE_32_PLANE_MODE));
}
static void cnp_init_clock_gating(struct drm_i915_private *dev_priv)
{
if (!HAS_PCH_CNP(dev_priv))
return;
/* Display WA #1181 WaSouthDisplayDisablePWMCGEGating: cnp */
I915_WRITE(SOUTH_DSPCLK_GATE_D, I915_READ(SOUTH_DSPCLK_GATE_D) |
CNP_PWM_CGE_GATING_DISABLE);
}
static void cnl_init_clock_gating(struct drm_i915_private *dev_priv)
{
u32 val;
cnp_init_clock_gating(dev_priv);
/* This is not an Wa. Enable for better image quality */
I915_WRITE(_3D_CHICKEN3,
_MASKED_BIT_ENABLE(_3D_CHICKEN3_AA_LINE_QUALITY_FIX_ENABLE));
/* WaEnableChickenDCPR:cnl */
I915_WRITE(GEN8_CHICKEN_DCPR_1,
I915_READ(GEN8_CHICKEN_DCPR_1) | MASK_WAKEMEM);
/* WaFbcWakeMemOn:cnl */
I915_WRITE(DISP_ARB_CTL, I915_READ(DISP_ARB_CTL) |
DISP_FBC_MEMORY_WAKE);
val = I915_READ(SLICE_UNIT_LEVEL_CLKGATE);
/* ReadHitWriteOnlyDisable:cnl */
val |= RCCUNIT_CLKGATE_DIS;
/* WaSarbUnitClockGatingDisable:cnl (pre-prod) */
if (IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_B0))
val |= SARBUNIT_CLKGATE_DIS;
I915_WRITE(SLICE_UNIT_LEVEL_CLKGATE, val);
/* Wa_2201832410:cnl */
val = I915_READ(SUBSLICE_UNIT_LEVEL_CLKGATE);
val |= GWUNIT_CLKGATE_DIS;
I915_WRITE(SUBSLICE_UNIT_LEVEL_CLKGATE, val);
/* WaDisableVFclkgate:cnl */
/* WaVFUnitClockGatingDisable:cnl */
val = I915_READ(UNSLICE_UNIT_LEVEL_CLKGATE);
val |= VFUNIT_CLKGATE_DIS;
I915_WRITE(UNSLICE_UNIT_LEVEL_CLKGATE, val);
}
static void cfl_init_clock_gating(struct drm_i915_private *dev_priv)
{
cnp_init_clock_gating(dev_priv);
gen9_init_clock_gating(dev_priv);
/* WaFbcNukeOnHostModify:cfl */
I915_WRITE(ILK_DPFC_CHICKEN, I915_READ(ILK_DPFC_CHICKEN) |
ILK_DPFC_NUKE_ON_ANY_MODIFICATION);
}
static void kbl_init_clock_gating(struct drm_i915_private *dev_priv)
{
gen9_init_clock_gating(dev_priv);
/* WaDisableSDEUnitClockGating:kbl */
if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_B0))
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
/* WaDisableGamClockGating:kbl */
if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_B0))
I915_WRITE(GEN6_UCGCTL1, I915_READ(GEN6_UCGCTL1) |
GEN6_GAMUNIT_CLOCK_GATE_DISABLE);
/* WaFbcNukeOnHostModify:kbl */
I915_WRITE(ILK_DPFC_CHICKEN, I915_READ(ILK_DPFC_CHICKEN) |
ILK_DPFC_NUKE_ON_ANY_MODIFICATION);
}
static void skl_init_clock_gating(struct drm_i915_private *dev_priv)
{
gen9_init_clock_gating(dev_priv);
/* WAC6entrylatency:skl */
I915_WRITE(FBC_LLC_READ_CTRL, I915_READ(FBC_LLC_READ_CTRL) |
FBC_LLC_FULLY_OPEN);
/* WaFbcNukeOnHostModify:skl */
I915_WRITE(ILK_DPFC_CHICKEN, I915_READ(ILK_DPFC_CHICKEN) |
ILK_DPFC_NUKE_ON_ANY_MODIFICATION);
}
static void bdw_init_clock_gating(struct drm_i915_private *dev_priv)
{
/* The GTT cache must be disabled if the system is using 2M pages. */
bool can_use_gtt_cache = !HAS_PAGE_SIZES(dev_priv,
I915_GTT_PAGE_SIZE_2M);
enum pipe pipe;
/* WaSwitchSolVfFArbitrationPriority:bdw */
I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | HSW_ECOCHK_ARB_PRIO_SOL);
/* WaPsrDPAMaskVBlankInSRD:bdw */
I915_WRITE(CHICKEN_PAR1_1,
I915_READ(CHICKEN_PAR1_1) | DPA_MASK_VBLANK_SRD);
/* WaPsrDPRSUnmaskVBlankInSRD:bdw */
for_each_pipe(dev_priv, pipe) {
I915_WRITE(CHICKEN_PIPESL_1(pipe),
I915_READ(CHICKEN_PIPESL_1(pipe)) |
BDW_DPRS_MASK_VBLANK_SRD);
}
/* WaVSRefCountFullforceMissDisable:bdw */
/* WaDSRefCountFullforceMissDisable:bdw */
I915_WRITE(GEN7_FF_THREAD_MODE,
I915_READ(GEN7_FF_THREAD_MODE) &
~(GEN8_FF_DS_REF_CNT_FFME | GEN7_FF_VS_REF_CNT_FFME));
I915_WRITE(GEN6_RC_SLEEP_PSMI_CONTROL,
_MASKED_BIT_ENABLE(GEN8_RC_SEMA_IDLE_MSG_DISABLE));
/* WaDisableSDEUnitClockGating:bdw */
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
/* WaProgramL3SqcReg1Default:bdw */
gen8_set_l3sqc_credits(dev_priv, 30, 2);
/* WaGttCachingOffByDefault:bdw */
I915_WRITE(HSW_GTT_CACHE_EN, can_use_gtt_cache ? GTT_CACHE_EN_ALL : 0);
/* WaKVMNotificationOnConfigChange:bdw */
I915_WRITE(CHICKEN_PAR2_1, I915_READ(CHICKEN_PAR2_1)
| KVM_CONFIG_CHANGE_NOTIFICATION_SELECT);
lpt_init_clock_gating(dev_priv);
/* WaDisableDopClockGating:bdw
*
* Also see the CHICKEN2 write in bdw_init_workarounds() to disable DOP
* clock gating.
*/
I915_WRITE(GEN6_UCGCTL1,
I915_READ(GEN6_UCGCTL1) | GEN6_EU_TCUNIT_CLOCK_GATE_DISABLE);
}
static void hsw_init_clock_gating(struct drm_i915_private *dev_priv)
{
/* L3 caching of data atomics doesn't work -- disable it. */
I915_WRITE(HSW_SCRATCH1, HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE);
I915_WRITE(HSW_ROW_CHICKEN3,
_MASKED_BIT_ENABLE(HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE));
/* This is required by WaCatErrorRejectionIssue:hsw */
I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
/* WaVSRefCountFullforceMissDisable:hsw */
I915_WRITE(GEN7_FF_THREAD_MODE,
I915_READ(GEN7_FF_THREAD_MODE) & ~GEN7_FF_VS_REF_CNT_FFME);
/* WaDisable_RenderCache_OperationalFlush:hsw */
I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
/* enable HiZ Raw Stall Optimization */
I915_WRITE(CACHE_MODE_0_GEN7,
_MASKED_BIT_DISABLE(HIZ_RAW_STALL_OPT_DISABLE));
/* WaDisable4x2SubspanOptimization:hsw */
I915_WRITE(CACHE_MODE_1,
_MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
/*
* BSpec recommends 8x4 when MSAA is used,
* however in practice 16x4 seems fastest.
*
* Note that PS/WM thread counts depend on the WIZ hashing
* disable bit, which we don't touch here, but it's good
* to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
*/
I915_WRITE(GEN7_GT_MODE,
drm/i915/bdw: Fix the write setting up the WIZ hashing mode I was playing with clang and oh surprise! a warning trigerred by -Wshift-overflow (gcc doesn't have this one): WA_SET_BIT_MASKED(GEN7_GT_MODE, GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4); drivers/gpu/drm/i915/intel_ringbuffer.c:786:2: warning: signed shift result (0x28002000000) requires 43 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] WA_SET_BIT_MASKED(GEN7_GT_MODE, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/intel_ringbuffer.c:737:15: note: expanded from macro 'WA_SET_BIT_MASKED' WA_REG(addr, _MASKED_BIT_ENABLE(mask), (mask) & 0xffff) Turned out GEN6_WIZ_HASHING_MASK was already shifted by 16, and we were trying to shift it a bit more. The other thing is that it's not the usual case of setting WA bits here, we need to have separate mask and value. To fix this, I've introduced a new _MASKED_FIELD() macro that takes both the (unshifted) mask and the desired value and the rest of the patch ripples through from it. This bug was introduced when reworking the WA emission in: Commit 7225342ab501befdb64bcec76ded41f5897c0855 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Oct 7 17:21:26 2014 +0300 drm/i915: Build workaround list in ring initialization v2: Invert the order of the mask and value arguments (Daniel Vetter) Rewrite _MASKED_BIT_ENABLE() and _MASKED_BIT_DISABLE() with _MASKED_FIELD() (Jani Nikula) Make sure we only evaluate 'a' once in _MASKED_BIT_ENABLE() (Dave Gordon) Add check to ensure the value is within the mask boundaries (Chris Wilson) v3: Ensure the the value and mask are 16 bits (Dave Gordon) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-08 10:33:51 -07:00
_MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4));
drm/i915: Make sample_c messages go faster on Haswell. Haswell significantly improved the performance of sampler_c messages, but the optimization appears to be off by default. Later platforms remove this bit, and apparently always enable the optimization. Improves performance in "Counter Strike: Global Offensive" by 18% at default settings on Iris Pro. This may break sampling of paletted formats (P8/A8P8/P8A8). It's unclear whether it affects sampling of paletted formats in general, or just the sample_c message (which is never used). While libva does have support for using paletted formats (primarily for OSDs), that support appears to have been broken for at least a year, so I couldn't observe a regression from this: I tried to get libva-intel to use paletted formats, and observe a regression...but the only thing I found that used it was mplayer's OSD (on screen display). Even without my patch, the colors were totally wrong with that, and it's according to a few distro wikis, that's been the case for over a year. If libva's code for paletted formats /is/ broken, they could always add code to disable this bit using the command validator when fixing it. Further investigation from Haihao shows that libva mplayer OSD seems to work at least on his setup (still unclear what's wron with Ken's), and that it's not affected by this patch. Quoting the discussion between Haihao and Ken: > > > If you use "-vo gl" or "-vo xv", the OSD is solid white text with a black > > > border around it. I presume that it's supposed to be white with vaapi as > > > well, but I guess I'm not entirely sure. > > > > > > It's possible that the optimization doesn't affect the palette as long as > > > you never use sample_c with the paletted textures. > > > > I verified the palette takes effect in the following way: > > > > 1. Only support P8A8 format in the driver > > > > 2. ran the above command and I saw white OSD text > > > > 3. Only support P4A4 format in the driver and don't use > > 3DSTATE_SAMPLER_PALETTE_LOAD0 to load the value to the texture palette, > > so the palette keeps unchanged. > > > > 4. ran the above command and I saw black OSD text. > > > > 5. Load the right value to the texture palette and ran the above command > > again, I saw white OSD text. > > > > Hence I think sample_c with the paletted textures is used in the driver. > > That sounds like the palette is actually working, then. Great :) > > I doubt that libva would use sample_c - sampling with a shadow comparison? > It looks like it just uses sample and sample+killpix. You are right, libva driver doesn't use sample_c message. > I'm pretty sure the sample_c optimization just uses the palette memory as > storage for some stuff, so it's quite possible it just works if you're > only using sample and sample+killpix. Thanks for the explanation, it makes sense to me. Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> [danvet: Add wa name from Ville's review to the comment and copypaste the explanation why we don't care about libva (already broken) from Ken. Also add conclusion from libva devs that&why this is all fine.] Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: "Xiang, Haihao" <haihao.xiang@intel.com> Cc: libva@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-31 17:23:00 -07:00
/* WaSampleCChickenBitEnable:hsw */
I915_WRITE(HALF_SLICE_CHICKEN3,
_MASKED_BIT_ENABLE(HSW_SAMPLE_C_PERFORMANCE));
/* WaSwitchSolVfFArbitrationPriority:hsw */
I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | HSW_ECOCHK_ARB_PRIO_SOL);
lpt_init_clock_gating(dev_priv);
}
static void ivb_init_clock_gating(struct drm_i915_private *dev_priv)
{
uint32_t snpcr;
drm/i915: Consolidate ILK_DSPCLK_GATE and PCH_DSPCLK_GATE Register 0x42020 was defined twice under the names PCH_DSPCLK_GATE_D and ILK_DSPCLK_GATE. This patch consolidate the 2 sets of defines in one. The transforms done are: PCH_DSPCLK_GATE_D -> ILK_DSPCLK_GATE_D ILK_DSPCLK_GATE -> ILK_DSPCLK_GATE_D DPARBUNIT_CLOCK_GATE_DISABLE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE ILK_DPARB_CLK_GATE -> ILK_DPARBUNIT_CLOCK_GATE_DISABLE DPFDUNIT_CLOCK_GATE_DISABLE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_DPFD_CLK_GATE -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE ILK_CLK_FBC -> ILK_DPFDUNIT_CLOCK_GATE_DISABLE DPFCRUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS1 -> ILK_DPFCRUNIT_CLOCK_GATE_DISABLE DPFCUNIT_CLOCK_GATE_DISABLE -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE ILK_DPFC_DIS2 -> ILK_DPFCUNIT_CLOCK_GATE_DISABLE We have a VHRUNIT_CLOCK_GATE_DISABLE define for the pre-ILK DSPCLK_GATE_D. Even if the same bit is used in ILK_DSPCLK_GATE_D, other bits in the register change, so I went with re-defining it, well more precisely rename IVB_VRHUNIT_CLK_GATE, which is not specific to IVB+. So: IVB_VRHUNIT_CLK_GATE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE VHRUNIT_CLOCK_GATE_DISABLE -> ILK_VHRUNIT_CLOCK_GATE_DISABLE (ILK+ code) This commit is only a renaming commit, further commits will clean up the logic. v2: Rename bit 5 and 7 to _ENABLE as setting them to 1 enables clock gating on their respective units, contrary to all of the other bits (Paulo Zanoni) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-10-19 10:55:41 -06:00
I915_WRITE(ILK_DSPCLK_GATE_D, ILK_VRHUNIT_CLOCK_GATE_DISABLE);
/* WaDisableEarlyCull:ivb */
I915_WRITE(_3D_CHICKEN3,
_MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL));
/* WaDisableBackToBackFlipFix:ivb */
I915_WRITE(IVB_CHICKEN3,
CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
CHICKEN3_DGMG_DONE_FIX_DISABLE);
/* WaDisablePSDDualDispatchEnable:ivb */
if (IS_IVB_GT1(dev_priv))
I915_WRITE(GEN7_HALF_SLICE_CHICKEN1,
_MASKED_BIT_ENABLE(GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE));
/* WaDisable_RenderCache_OperationalFlush:ivb */
I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
/* Apply the WaDisableRHWOOptimizationForRenderHang:ivb workaround. */
I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
/* WaApplyL3ControlAndL3ChickenMode:ivb */
I915_WRITE(GEN7_L3CNTLREG1,
GEN7_WA_FOR_GEN7_L3_CONTROL);
I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
GEN7_WA_L3_CHICKEN_MODE);
if (IS_IVB_GT1(dev_priv))
I915_WRITE(GEN7_ROW_CHICKEN2,
_MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
else {
/* must write both registers */
I915_WRITE(GEN7_ROW_CHICKEN2,
_MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
I915_WRITE(GEN7_ROW_CHICKEN2_GT2,
_MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
}
/* WaForceL3Serialization:ivb */
I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) &
~L3SQ_URB_READ_CAM_MATCH_DISABLE);
/*
* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
* This implements the WaDisableRCZUnitClockGating:ivb workaround.
*/
I915_WRITE(GEN6_UCGCTL2,
GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
/* This is required by WaCatErrorRejectionIssue:ivb */
I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
g4x_disable_trickle_feed(dev_priv);
gen7_setup_fixed_func_scheduler(dev_priv);
if (0) { /* causes HiZ corruption on ivb:gt1 */
/* enable HiZ Raw Stall Optimization */
I915_WRITE(CACHE_MODE_0_GEN7,
_MASKED_BIT_DISABLE(HIZ_RAW_STALL_OPT_DISABLE));
}
/* WaDisable4x2SubspanOptimization:ivb */
I915_WRITE(CACHE_MODE_1,
_MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
/*
* BSpec recommends 8x4 when MSAA is used,
* however in practice 16x4 seems fastest.
*
* Note that PS/WM thread counts depend on the WIZ hashing
* disable bit, which we don't touch here, but it's good
* to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
*/
I915_WRITE(GEN7_GT_MODE,
drm/i915/bdw: Fix the write setting up the WIZ hashing mode I was playing with clang and oh surprise! a warning trigerred by -Wshift-overflow (gcc doesn't have this one): WA_SET_BIT_MASKED(GEN7_GT_MODE, GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4); drivers/gpu/drm/i915/intel_ringbuffer.c:786:2: warning: signed shift result (0x28002000000) requires 43 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] WA_SET_BIT_MASKED(GEN7_GT_MODE, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/intel_ringbuffer.c:737:15: note: expanded from macro 'WA_SET_BIT_MASKED' WA_REG(addr, _MASKED_BIT_ENABLE(mask), (mask) & 0xffff) Turned out GEN6_WIZ_HASHING_MASK was already shifted by 16, and we were trying to shift it a bit more. The other thing is that it's not the usual case of setting WA bits here, we need to have separate mask and value. To fix this, I've introduced a new _MASKED_FIELD() macro that takes both the (unshifted) mask and the desired value and the rest of the patch ripples through from it. This bug was introduced when reworking the WA emission in: Commit 7225342ab501befdb64bcec76ded41f5897c0855 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Oct 7 17:21:26 2014 +0300 drm/i915: Build workaround list in ring initialization v2: Invert the order of the mask and value arguments (Daniel Vetter) Rewrite _MASKED_BIT_ENABLE() and _MASKED_BIT_DISABLE() with _MASKED_FIELD() (Jani Nikula) Make sure we only evaluate 'a' once in _MASKED_BIT_ENABLE() (Dave Gordon) Add check to ensure the value is within the mask boundaries (Chris Wilson) v3: Ensure the the value and mask are 16 bits (Dave Gordon) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-08 10:33:51 -07:00
_MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4));
snpcr = I915_READ(GEN6_MBCUNIT_SNPCR);
snpcr &= ~GEN6_MBC_SNPCR_MASK;
snpcr |= GEN6_MBC_SNPCR_MED;
I915_WRITE(GEN6_MBCUNIT_SNPCR, snpcr);
if (!HAS_PCH_NOP(dev_priv))
cpt_init_clock_gating(dev_priv);
gen6_check_mch_setup(dev_priv);
}
static void vlv_init_clock_gating(struct drm_i915_private *dev_priv)
{
/* WaDisableEarlyCull:vlv */
I915_WRITE(_3D_CHICKEN3,
_MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL));
/* WaDisableBackToBackFlipFix:vlv */
I915_WRITE(IVB_CHICKEN3,
CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
CHICKEN3_DGMG_DONE_FIX_DISABLE);
/* WaPsdDispatchEnable:vlv */
/* WaDisablePSDDualDispatchEnable:vlv */
I915_WRITE(GEN7_HALF_SLICE_CHICKEN1,
_MASKED_BIT_ENABLE(GEN7_MAX_PS_THREAD_DEP |
GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE));
/* WaDisable_RenderCache_OperationalFlush:vlv */
I915_WRITE(CACHE_MODE_0_GEN7, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
/* WaForceL3Serialization:vlv */
I915_WRITE(GEN7_L3SQCREG4, I915_READ(GEN7_L3SQCREG4) &
~L3SQ_URB_READ_CAM_MATCH_DISABLE);
/* WaDisableDopClockGating:vlv */
I915_WRITE(GEN7_ROW_CHICKEN2,
_MASKED_BIT_ENABLE(DOP_CLOCK_GATING_DISABLE));
/* This is required by WaCatErrorRejectionIssue:vlv */
I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
gen7_setup_fixed_func_scheduler(dev_priv);
/*
* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
* This implements the WaDisableRCZUnitClockGating:vlv workaround.
*/
I915_WRITE(GEN6_UCGCTL2,
GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
/* WaDisableL3Bank2xClockGate:vlv
* Disabling L3 clock gating- MMIO 940c[25] = 1
* Set bit 25, to disable L3_BANK_2x_CLK_GATING */
I915_WRITE(GEN7_UCGCTL4,
I915_READ(GEN7_UCGCTL4) | GEN7_L3BANK2X_CLOCK_GATE_DISABLE);
/*
* BSpec says this must be set, even though
* WaDisable4x2SubspanOptimization isn't listed for VLV.
*/
I915_WRITE(CACHE_MODE_1,
_MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
/*
* BSpec recommends 8x4 when MSAA is used,
* however in practice 16x4 seems fastest.
*
* Note that PS/WM thread counts depend on the WIZ hashing
* disable bit, which we don't touch here, but it's good
* to keep in mind (see 3DSTATE_PS and 3DSTATE_WM).
*/
I915_WRITE(GEN7_GT_MODE,
_MASKED_FIELD(GEN6_WIZ_HASHING_MASK, GEN6_WIZ_HASHING_16x4));
/*
* WaIncreaseL3CreditsForVLVB0:vlv
* This is the hardware default actually.
*/
I915_WRITE(GEN7_L3SQCREG1, VLV_B0_WA_L3SQCREG1_VALUE);
/*
* WaDisableVLVClockGating_VBIIssue:vlv
* Disable clock gating on th GCFG unit to prevent a delay
* in the reporting of vblank events.
*/
I915_WRITE(VLV_GUNIT_CLOCK_GATE, GCFG_DIS);
}
static void chv_init_clock_gating(struct drm_i915_private *dev_priv)
{
/* WaVSRefCountFullforceMissDisable:chv */
/* WaDSRefCountFullforceMissDisable:chv */
I915_WRITE(GEN7_FF_THREAD_MODE,
I915_READ(GEN7_FF_THREAD_MODE) &
~(GEN8_FF_DS_REF_CNT_FFME | GEN7_FF_VS_REF_CNT_FFME));
/* WaDisableSemaphoreAndSyncFlipWait:chv */
I915_WRITE(GEN6_RC_SLEEP_PSMI_CONTROL,
_MASKED_BIT_ENABLE(GEN8_RC_SEMA_IDLE_MSG_DISABLE));
/* WaDisableCSUnitClockGating:chv */
I915_WRITE(GEN6_UCGCTL1, I915_READ(GEN6_UCGCTL1) |
GEN6_CSUNIT_CLOCK_GATE_DISABLE);
/* WaDisableSDEUnitClockGating:chv */
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
/*
* WaProgramL3SqcReg1Default:chv
* See gfxspecs/Related Documents/Performance Guide/
* LSQC Setting Recommendations.
*/
gen8_set_l3sqc_credits(dev_priv, 38, 2);
/*
* GTT cache may not work with big pages, so if those
* are ever enabled GTT cache may need to be disabled.
*/
I915_WRITE(HSW_GTT_CACHE_EN, GTT_CACHE_EN_ALL);
}
static void g4x_init_clock_gating(struct drm_i915_private *dev_priv)
{
uint32_t dspclk_gate;
I915_WRITE(RENCLK_GATE_D1, 0);
I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
GS_UNIT_CLOCK_GATE_DISABLE |
CL_UNIT_CLOCK_GATE_DISABLE);
I915_WRITE(RAMCLK_GATE_D, 0);
dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE |
OVRUNIT_CLOCK_GATE_DISABLE |
OVCUNIT_CLOCK_GATE_DISABLE;
if (IS_GM45(dev_priv))
dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE;
I915_WRITE(DSPCLK_GATE_D, dspclk_gate);
/* WaDisableRenderCachePipelinedFlush */
I915_WRITE(CACHE_MODE_0,
_MASKED_BIT_ENABLE(CM0_PIPELINED_RENDER_FLUSH_DISABLE));
/* WaDisable_RenderCache_OperationalFlush:g4x */
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
g4x_disable_trickle_feed(dev_priv);
}
static void i965gm_init_clock_gating(struct drm_i915_private *dev_priv)
{
I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE);
I915_WRITE(RENCLK_GATE_D2, 0);
I915_WRITE(DSPCLK_GATE_D, 0);
I915_WRITE(RAMCLK_GATE_D, 0);
I915_WRITE16(DEUC, 0);
I915_WRITE(MI_ARB_STATE,
_MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE));
/* WaDisable_RenderCache_OperationalFlush:gen4 */
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
}
static void i965g_init_clock_gating(struct drm_i915_private *dev_priv)
{
I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE |
I965_RCC_CLOCK_GATE_DISABLE |
I965_RCPB_CLOCK_GATE_DISABLE |
I965_ISC_CLOCK_GATE_DISABLE |
I965_FBC_CLOCK_GATE_DISABLE);
I915_WRITE(RENCLK_GATE_D2, 0);
I915_WRITE(MI_ARB_STATE,
_MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE));
/* WaDisable_RenderCache_OperationalFlush:gen4 */
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
}
static void gen3_init_clock_gating(struct drm_i915_private *dev_priv)
{
u32 dstate = I915_READ(D_STATE);
dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING |
DSTATE_DOT_CLOCK_GATING;
I915_WRITE(D_STATE, dstate);
if (IS_PINEVIEW(dev_priv))
I915_WRITE(ECOSKPD, _MASKED_BIT_ENABLE(ECO_GATING_CX_ONLY));
/* IIR "flip pending" means done if this bit is set */
I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE));
/* interrupts should cause a wake up from C3 */
I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_AGPBUSY_INT_EN));
/* On GEN3 we really need to make sure the ARB C3 LP bit is set */
I915_WRITE(MI_ARB_STATE, _MASKED_BIT_ENABLE(MI_ARB_C3_LP_WRITE_ENABLE));
I915_WRITE(MI_ARB_STATE,
_MASKED_BIT_ENABLE(MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE));
}
static void i85x_init_clock_gating(struct drm_i915_private *dev_priv)
{
I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
/* interrupts should cause a wake up from C3 */
I915_WRITE(MI_STATE, _MASKED_BIT_ENABLE(MI_AGPBUSY_INT_EN) |
_MASKED_BIT_DISABLE(MI_AGPBUSY_830_MODE));
I915_WRITE(MEM_MODE,
_MASKED_BIT_ENABLE(MEM_DISPLAY_TRICKLE_FEED_DISABLE));
}
static void i830_init_clock_gating(struct drm_i915_private *dev_priv)
{
I915_WRITE(MEM_MODE,
_MASKED_BIT_ENABLE(MEM_DISPLAY_A_TRICKLE_FEED_DISABLE) |
_MASKED_BIT_ENABLE(MEM_DISPLAY_B_TRICKLE_FEED_DISABLE));
}
void intel_init_clock_gating(struct drm_i915_private *dev_priv)
{
dev_priv->display.init_clock_gating(dev_priv);
}
void intel_suspend_hw(struct drm_i915_private *dev_priv)
{
if (HAS_PCH_LPT(dev_priv))
lpt_suspend_hw(dev_priv);
}
static void nop_init_clock_gating(struct drm_i915_private *dev_priv)
{
DRM_DEBUG_KMS("No clock gating settings or workarounds applied.\n");
}
/**
* intel_init_clock_gating_hooks - setup the clock gating hooks
* @dev_priv: device private
*
* Setup the hooks that configure which clocks of a given platform can be
* gated and also apply various GT and display specific workarounds for these
* platforms. Note that some GT specific workarounds are applied separately
* when GPU contexts or batchbuffers start their execution.
*/
void intel_init_clock_gating_hooks(struct drm_i915_private *dev_priv)
{
2018-05-08 15:29:23 -06:00
if (IS_ICELAKE(dev_priv))
dev_priv->display.init_clock_gating = icl_init_clock_gating;
2018-05-08 15:29:23 -06:00
else if (IS_CANNONLAKE(dev_priv))
dev_priv->display.init_clock_gating = cnl_init_clock_gating;
else if (IS_COFFEELAKE(dev_priv))
dev_priv->display.init_clock_gating = cfl_init_clock_gating;
else if (IS_SKYLAKE(dev_priv))
dev_priv->display.init_clock_gating = skl_init_clock_gating;
else if (IS_KABYLAKE(dev_priv))
dev_priv->display.init_clock_gating = kbl_init_clock_gating;
else if (IS_BROXTON(dev_priv))
dev_priv->display.init_clock_gating = bxt_init_clock_gating;
else if (IS_GEMINILAKE(dev_priv))
dev_priv->display.init_clock_gating = glk_init_clock_gating;
else if (IS_BROADWELL(dev_priv))
dev_priv->display.init_clock_gating = bdw_init_clock_gating;
else if (IS_CHERRYVIEW(dev_priv))
dev_priv->display.init_clock_gating = chv_init_clock_gating;
else if (IS_HASWELL(dev_priv))
dev_priv->display.init_clock_gating = hsw_init_clock_gating;
else if (IS_IVYBRIDGE(dev_priv))
dev_priv->display.init_clock_gating = ivb_init_clock_gating;
else if (IS_VALLEYVIEW(dev_priv))
dev_priv->display.init_clock_gating = vlv_init_clock_gating;
else if (IS_GEN6(dev_priv))
dev_priv->display.init_clock_gating = gen6_init_clock_gating;
else if (IS_GEN5(dev_priv))
dev_priv->display.init_clock_gating = ilk_init_clock_gating;
else if (IS_G4X(dev_priv))
dev_priv->display.init_clock_gating = g4x_init_clock_gating;
else if (IS_I965GM(dev_priv))
dev_priv->display.init_clock_gating = i965gm_init_clock_gating;
else if (IS_I965G(dev_priv))
dev_priv->display.init_clock_gating = i965g_init_clock_gating;
else if (IS_GEN3(dev_priv))
dev_priv->display.init_clock_gating = gen3_init_clock_gating;
else if (IS_I85X(dev_priv) || IS_I865G(dev_priv))
dev_priv->display.init_clock_gating = i85x_init_clock_gating;
else if (IS_GEN2(dev_priv))
dev_priv->display.init_clock_gating = i830_init_clock_gating;
else {
MISSING_CASE(INTEL_DEVID(dev_priv));
dev_priv->display.init_clock_gating = nop_init_clock_gating;
}
}
/* Set up chip specific power management-related functions */
void intel_init_pm(struct drm_i915_private *dev_priv)
{
/* For cxsr */
if (IS_PINEVIEW(dev_priv))
i915_pineview_get_mem_freq(dev_priv);
else if (IS_GEN5(dev_priv))
i915_ironlake_get_mem_freq(dev_priv);
/* For FIFO watermark updates */
if (INTEL_GEN(dev_priv) >= 9) {
skl_setup_wm_latency(dev_priv);
dev_priv->display.initial_watermarks = skl_initial_wm;
dev_priv->display.atomic_update_watermarks = skl_atomic_update_crtc_wm;
drm/i915/gen9: Compute DDB allocation at atomic check time (v4) Calculate the DDB blocks needed to satisfy the current atomic transaction at atomic check time. This is a prerequisite to calculating SKL watermarks during the 'check' phase and rejecting any configurations that we can't find valid watermarks for. Due to the nature of DDB allocation, it's possible for the addition of a new CRTC to make the watermark configuration already in use on another, unchanged CRTC become invalid. A change in which CRTC's are active triggers a recompute of the entire DDB, which unfortunately means we need to disallow any other atomic commits from racing with such an update. If the active CRTC's change, we need to grab the lock on all CRTC's and run all CRTC's through their 'check' handler to recompute and re-check their per-CRTC DDB allocations. Note that with this patch we only compute the DDB allocation but we don't actually use the computed values during watermark programming yet. For ease of review/testing/bisecting, we still recompute the DDB at watermark programming time and just WARN() if it doesn't match the precomputed values. A future patch will switch over to using the precomputed values once we're sure they're being properly computed. Another clarifying note: DDB allocation itself shouldn't ever fail with the algorithm we use today (i.e., we have enough DDB blocks on BXT to support the minimum needs of the worst-case scenario of every pipe/plane enabled at full size). However the watermarks calculations based on the DDB may fail and we'll be moving those to the atomic check as well in future patches. v2: - Skip DDB calculations in the rare case where our transaction doesn't actually touch any CRTC's at all. Assuming at least one CRTC state is present in our transaction, then it means we can't race with any transactions that would update dev_priv->active_crtcs (which requires _all_ CRTC locks). v3: - Also calculate DDB during initial hw readout, to prevent using incorrect bios values. (Maarten) v4: - Use new distrust_bios_wm flag instead of skip_initial_wm (which was never actually set). - Set intel_state->active_pipe_changes instead of just realloc_pipes Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lyude Paul <cpaul@redhat.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463061971-19638-10-git-send-email-matthew.d.roper@intel.com
2016-05-12 08:06:03 -06:00
dev_priv->display.compute_global_watermarks = skl_compute_wm;
} else if (HAS_PCH_SPLIT(dev_priv)) {
ilk_setup_wm_latency(dev_priv);
if ((IS_GEN5(dev_priv) && dev_priv->wm.pri_latency[1] &&
dev_priv->wm.spr_latency[1] && dev_priv->wm.cur_latency[1]) ||
(!IS_GEN5(dev_priv) && dev_priv->wm.pri_latency[0] &&
dev_priv->wm.spr_latency[0] && dev_priv->wm.cur_latency[0])) {
drm/i915: Calculate ILK-style watermarks during atomic check (v3) Calculate pipe watermarks during atomic calculation phase, based on the contents of the atomic transaction's state structure. We still program the watermarks at the same time we did before, but the computation now happens much earlier. While this patch isn't too exciting by itself, it paves the way for future patches. The eventual goal (which will be realized in future patches in this series) is to calculate multiple sets up watermark values up front, and then program them at different times (pre- vs post-vblank) on the platforms that need a two-step watermark update. While we're at it, s/intel_compute_pipe_wm/ilk_compute_pipe_wm/ since this function only applies to ILK-style watermarks and we have a completely different function for SKL-style watermarks. Note that the original code had a memcmp() in ilk_update_wm() to avoid calling ilk_program_watermarks() if the watermarks hadn't changed. This memcmp vanishes here, which means we may do some unnecessary result generation and merging in cases where watermarks didn't change, but the lower-level function ilk_write_wm_values already makes sure that we don't actually try to program the watermark registers again. v2: Squash a few commits from the original series together; no longer leave pre-calculated wm's in a separate temporary structure since it's easier to follow the logic if we just cut over to using the pre-calculated values directly. v3: - Pass intel_crtc instead of drm_crtc to .compute_pipe_wm() entrypoint and use intel_atomic_get_crtc_state() to avoid need for extra casting. (Ander) - Drop unused intel_check_crtc() function prototype. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Smoke-tested-by: Paulo Zanoni <przanoni@gmail.com> Link: http://patchwork.freedesktop.org/patch/60363/
2015-09-24 16:53:16 -06:00
dev_priv->display.compute_pipe_wm = ilk_compute_pipe_wm;
drm/i915: Add two-stage ILK-style watermark programming (v11) In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456276813-5689-1-git-send-email-matthew.d.roper@intel.com
2016-02-23 18:20:13 -07:00
dev_priv->display.compute_intermediate_wm =
ilk_compute_intermediate_wm;
dev_priv->display.initial_watermarks =
ilk_initial_watermarks;
dev_priv->display.optimize_watermarks =
ilk_optimize_watermarks;
} else {
DRM_DEBUG_KMS("Failed to read display plane latency. "
"Disable CxSR\n");
}
} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
vlv_setup_wm_latency(dev_priv);
dev_priv->display.compute_pipe_wm = vlv_compute_pipe_wm;
dev_priv->display.compute_intermediate_wm = vlv_compute_intermediate_wm;
dev_priv->display.initial_watermarks = vlv_initial_watermarks;
dev_priv->display.optimize_watermarks = vlv_optimize_watermarks;
dev_priv->display.atomic_update_watermarks = vlv_atomic_update_fifo;
drm/i915: Two stage watermarks for g4x Implement proper two stage watermark programming for g4x. As with other pre-SKL platforms, the watermark registers aren't double buffered on g4x. Hence we must sequence the watermark update carefully around plane updates. The code is quite heavily modelled on the VLV/CHV code, with some fairly significant differences due to the different hardware architecture: * g4x doesn't use inverted watermark values * CxSR actually affects the watermarks since it controls memory self refresh in addition to the max FIFO mode * A further HPLL SR mode is possible with higher memory wakeup latency * g4x has FBC2 and so it also has FBC watermarks * max FIFO mode for primary plane only (cursor is allowed, sprite is not) * g4x has no manual FIFO repartitioning * some TLB miss related workarounds are needed for the watermarks Actually the hardware is quite similar to ILK+ in many ways. The most visible differences are in the actual watermakr register layout. ILK revamped that part quite heavily whereas g4x is still using the layout inherited from earlier platforms. Note that we didn't previously enable the HPLL SR on g4x. So in order to not introduce too many functional changes in this patch I've not actually enabled it here either, even though the code is now fully ready for it. We'll enable it separately later on. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-13-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-04-21 12:14:29 -06:00
} else if (IS_G4X(dev_priv)) {
g4x_setup_wm_latency(dev_priv);
dev_priv->display.compute_pipe_wm = g4x_compute_pipe_wm;
dev_priv->display.compute_intermediate_wm = g4x_compute_intermediate_wm;
dev_priv->display.initial_watermarks = g4x_initial_watermarks;
dev_priv->display.optimize_watermarks = g4x_optimize_watermarks;
} else if (IS_PINEVIEW(dev_priv)) {
if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev_priv),
dev_priv->is_ddr3,
dev_priv->fsb_freq,
dev_priv->mem_freq)) {
DRM_INFO("failed to find known CxSR latency "
"(found ddr%s fsb freq %d, mem freq %d), "
"disabling CxSR\n",
(dev_priv->is_ddr3 == 1) ? "3" : "2",
dev_priv->fsb_freq, dev_priv->mem_freq);
/* Disable CxSR and never update its watermark again */
intel_set_memory_cxsr(dev_priv, false);
dev_priv->display.update_wm = NULL;
} else
dev_priv->display.update_wm = pineview_update_wm;
} else if (IS_GEN4(dev_priv)) {
dev_priv->display.update_wm = i965_update_wm;
} else if (IS_GEN3(dev_priv)) {
dev_priv->display.update_wm = i9xx_update_wm;
dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
} else if (IS_GEN2(dev_priv)) {
if (INTEL_INFO(dev_priv)->num_pipes == 1) {
dev_priv->display.update_wm = i845_update_wm;
dev_priv->display.get_fifo_size = i845_get_fifo_size;
} else {
dev_priv->display.update_wm = i9xx_update_wm;
dev_priv->display.get_fifo_size = i830_get_fifo_size;
}
} else {
DRM_ERROR("unexpected fall-through in intel_init_pm\n");
}
}
static inline int gen6_check_mailbox_status(struct drm_i915_private *dev_priv)
{
uint32_t flags =
I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK;
switch (flags) {
case GEN6_PCODE_SUCCESS:
return 0;
case GEN6_PCODE_UNIMPLEMENTED_CMD:
return -ENODEV;
case GEN6_PCODE_ILLEGAL_CMD:
return -ENXIO;
case GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
drm/i915: Add GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE to SNB According to the CI test machines, SNB also uses the GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE value to report a bad GEN6_PCODE_MIN_FREQ_TABLE request. [ 157.744641] WARNING: CPU: 5 PID: 9238 at drivers/gpu/drm/i915/intel_pm.c:7760 sandybridge_pcode_write+0x141/0x200 [i915] [ 157.744642] Missing switch case (16) in gen6_check_mailbox_status [ 157.744642] Modules linked in: snd_hda_intel i915 ax88179_178a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core mei_me lpc_ich snd_pcm mei broadcom bcm_phy_lib tg3 ptp pps_core [last unloaded: vgem] [ 157.744658] CPU: 5 PID: 9238 Comm: drv_hangman Tainted: G U W 4.8.0-rc3-CI-CI_DRM_1589+ #1 [ 157.744658] Hardware name: Dell Inc. XPS 8300 /0Y2MRG, BIOS A06 10/17/2011 [ 157.744659] 0000000000000000 ffff88011f093a98 ffffffff81426415 ffff88011f093ae8 [ 157.744662] 0000000000000000 ffff88011f093ad8 ffffffff8107d2a6 00001e50810d3c9f [ 157.744663] ffff880128680000 0000000000000008 0000000000000000 ffff88012868a650 [ 157.744665] Call Trace: [ 157.744669] [<ffffffff81426415>] dump_stack+0x67/0x92 [ 157.744672] [<ffffffff8107d2a6>] __warn+0xc6/0xe0 [ 157.744673] [<ffffffff8107d30a>] warn_slowpath_fmt+0x4a/0x50 [ 157.744685] [<ffffffffa0029831>] sandybridge_pcode_write+0x141/0x200 [i915] [ 157.744697] [<ffffffffa002a88a>] intel_enable_gt_powersave+0x64a/0x1330 [i915] [ 157.744712] [<ffffffffa006b4cb>] ? i9xx_emit_request+0x1b/0x80 [i915] [ 157.744725] [<ffffffffa0055ed3>] __i915_add_request+0x1e3/0x370 [i915] [ 157.744738] [<ffffffffa00428bd>] i915_gem_do_execbuffer.isra.16+0xced/0x1b80 [i915] [ 157.744740] [<ffffffff811a232e>] ? __might_fault+0x3e/0x90 [ 157.744752] [<ffffffffa0043b72>] i915_gem_execbuffer2+0xc2/0x2a0 [i915] [ 157.744753] [<ffffffff815485b7>] drm_ioctl+0x207/0x4c0 [ 157.744765] [<ffffffffa0043ab0>] ? i915_gem_execbuffer+0x360/0x360 [i915] [ 157.744767] [<ffffffff810ea4ad>] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 157.744769] [<ffffffff811fe09e>] do_vfs_ioctl+0x8e/0x680 [ 157.744770] [<ffffffff811a2377>] ? __might_fault+0x87/0x90 [ 157.744771] [<ffffffff811a232e>] ? __might_fault+0x3e/0x90 [ 157.744773] [<ffffffff810d3df2>] ? trace_hardirqs_on_caller+0x122/0x1b0 [ 157.744774] [<ffffffff811fe6cc>] SyS_ioctl+0x3c/0x70 [ 157.744776] [<ffffffff8180fe69>] entry_SYSCALL_64_fastpath+0x1c/0xac Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97491 Fixes: 87660502f1a4 ("drm/i915/gen6+: Interpret mailbox error flags") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/20160826105926.3413-1-chris@chris-wilson.co.uk Acked-by: Mika Kuoppala <mika.kuoppala@intel.com>
2016-08-26 04:59:26 -06:00
case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
return -EOVERFLOW;
case GEN6_PCODE_TIMEOUT:
return -ETIMEDOUT;
default:
MISSING_CASE(flags);
return 0;
}
}
static inline int gen7_check_mailbox_status(struct drm_i915_private *dev_priv)
{
uint32_t flags =
I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK;
switch (flags) {
case GEN6_PCODE_SUCCESS:
return 0;
case GEN6_PCODE_ILLEGAL_CMD:
return -ENXIO;
case GEN7_PCODE_TIMEOUT:
return -ETIMEDOUT;
case GEN7_PCODE_ILLEGAL_DATA:
return -EINVAL;
case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
return -EOVERFLOW;
default:
MISSING_CASE(flags);
return 0;
}
}
int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val)
{
int status;
WARN_ON(!mutex_is_locked(&dev_priv->pcu_lock));
/* GEN6_PCODE_* are outside of the forcewake domain, we can
* use te fw I915_READ variants to reduce the amount of work
* required when reading/writing.
*/
if (I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) {
DRM_DEBUG_DRIVER("warning: pcode (read from mbox %x) mailbox access failed for %ps\n",
mbox, __builtin_return_address(0));
return -EAGAIN;
}
I915_WRITE_FW(GEN6_PCODE_DATA, *val);
I915_WRITE_FW(GEN6_PCODE_DATA1, 0);
I915_WRITE_FW(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox);
if (__intel_wait_for_register_fw(dev_priv,
GEN6_PCODE_MAILBOX, GEN6_PCODE_READY, 0,
500, 0, NULL)) {
DRM_ERROR("timeout waiting for pcode read (from mbox %x) to finish for %ps\n",
mbox, __builtin_return_address(0));
return -ETIMEDOUT;
}
*val = I915_READ_FW(GEN6_PCODE_DATA);
I915_WRITE_FW(GEN6_PCODE_DATA, 0);
if (INTEL_GEN(dev_priv) > 6)
status = gen7_check_mailbox_status(dev_priv);
else
status = gen6_check_mailbox_status(dev_priv);
if (status) {
DRM_DEBUG_DRIVER("warning: pcode (read from mbox %x) mailbox access failed for %ps: %d\n",
mbox, __builtin_return_address(0), status);
return status;
}
return 0;
}
drm/i915/bxt, glk: Increase PCODE timeouts during CDCLK freq changing Currently we see sporadic timeouts during CDCLK changing both on BXT and GLK as reported by the Bugzilla: ticket. It's easy to reproduce this by changing the frequency in a tight loop after blanking the display. The upper bound for the completion time is 800us based on my tests, so increase it from the current 500us to 2ms; with that I couldn't trigger the problem either on BXT or GLK. Note that timeouts happened during both the change notification and the voltage level setting PCODE request. (For the latter one BSpec doesn't require us to wait for completion before further HW programming.) This issue is similar to commit 2c7d0602c815 ("drm/i915/gen9: Fix PCODE polling during CDCLK change notification") but there the PCODE request does complete (as shown by the mbox busy flag), only the reply we get from PCODE indicates a failure. So there we keep resending the request until a success reply, here we just have to increase the timeout for the one PCODE request we send. v2: - s/snb_pcode_request/sandybridge_pcode_write_timeout/ (Ville) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.4+ Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103326 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-1-imre.deak@intel.com
2018-01-30 07:29:38 -07:00
int sandybridge_pcode_write_timeout(struct drm_i915_private *dev_priv,
u32 mbox, u32 val,
int fast_timeout_us, int slow_timeout_ms)
{
int status;
WARN_ON(!mutex_is_locked(&dev_priv->pcu_lock));
/* GEN6_PCODE_* are outside of the forcewake domain, we can
* use te fw I915_READ variants to reduce the amount of work
* required when reading/writing.
*/
if (I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) {
DRM_DEBUG_DRIVER("warning: pcode (write of 0x%08x to mbox %x) mailbox access failed for %ps\n",
val, mbox, __builtin_return_address(0));
return -EAGAIN;
}
I915_WRITE_FW(GEN6_PCODE_DATA, val);
I915_WRITE_FW(GEN6_PCODE_DATA1, 0);
I915_WRITE_FW(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox);
if (__intel_wait_for_register_fw(dev_priv,
GEN6_PCODE_MAILBOX, GEN6_PCODE_READY, 0,
fast_timeout_us, slow_timeout_ms,
NULL)) {
DRM_ERROR("timeout waiting for pcode write of 0x%08x to mbox %x to finish for %ps\n",
val, mbox, __builtin_return_address(0));
return -ETIMEDOUT;
}
I915_WRITE_FW(GEN6_PCODE_DATA, 0);
if (INTEL_GEN(dev_priv) > 6)
status = gen7_check_mailbox_status(dev_priv);
else
status = gen6_check_mailbox_status(dev_priv);
if (status) {
DRM_DEBUG_DRIVER("warning: pcode (write of 0x%08x to mbox %x) mailbox access failed for %ps: %d\n",
val, mbox, __builtin_return_address(0), status);
return status;
}
return 0;
}
drm/i915/gen9: Fix PCODE polling during CDCLK change notification commit 848496e5902833600f7992f4faa82dc1546051ba Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Jul 13 16:32:03 2016 +0300 drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL increased the timeout to match the spec, but we still see a timeout on at least one SKL. A CDCLK change request following the failed one will succeed nevertheless. I could reproduce this problem easily by running kms_pipe_crc_basic in a loop. In all failure cases _wait_for() was pre-empted for >3ms and so in the worst case - when the pre-emption happened right after calculating timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only once which failed and so _wait_for() timed out. As opposed to this the spec says to keep retrying the request for at most a 3ms period. To fix this send the first request explicitly to guarantee that there is 3ms between the first and last request. Though this matches the spec, I noticed that in rare cases this can still time out if we sent only a few requests (in the worst case 2) _and_ PCODE is busy for some reason even after a previous request and a 3ms delay. To work around this retry the polling with pre-emption disabled to maximize the number of requests. Also increase the timeout to 10ms to account for interrupts that could reduce the number of requests. With this change I couldn't trigger the problem. v2: - Use 1ms poll period instead of 10us. (Chris) v3: - Poll with pre-emption disabled to increase the number of request attempts. (Ville, Chris) - Factor out a helper to poll, it's also needed by the next patch. v4: - Pass reply_mask, reply to skl_pcode_request(), instead of assuming the reply is generic. (Ville) v5: - List the request specific timeout values as code comment. (Ville) v6: - Try the poll first with preemption enabled. - Add code comment about first request being queued by PCODE. (Art) - Add timeout_base_ms argument. (Ville) v7: - Clarify code comment about first queued request. (Chris) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Art Runyan <arthur.j.runyan@intel.com> Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms Cc: <stable@vger.kernel.org> # v4.2- Fixes: 5d96d8afcfbb ("drm/i915/skl: Deinit/init the display at suspend/resume") Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929 Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com
2016-12-05 09:27:37 -07:00
static bool skl_pcode_try_request(struct drm_i915_private *dev_priv, u32 mbox,
u32 request, u32 reply_mask, u32 reply,
u32 *status)
{
u32 val = request;
*status = sandybridge_pcode_read(dev_priv, mbox, &val);
return *status || ((val & reply_mask) == reply);
}
/**
* skl_pcode_request - send PCODE request until acknowledgment
* @dev_priv: device private
* @mbox: PCODE mailbox ID the request is targeted for
* @request: request ID
* @reply_mask: mask used to check for request acknowledgment
* @reply: value used to check for request acknowledgment
* @timeout_base_ms: timeout for polling with preemption enabled
*
* Keep resending the @request to @mbox until PCODE acknowledges it, PCODE
* reports an error or an overall timeout of @timeout_base_ms+50 ms expires.
drm/i915/gen9: Fix PCODE polling during CDCLK change notification commit 848496e5902833600f7992f4faa82dc1546051ba Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Jul 13 16:32:03 2016 +0300 drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL increased the timeout to match the spec, but we still see a timeout on at least one SKL. A CDCLK change request following the failed one will succeed nevertheless. I could reproduce this problem easily by running kms_pipe_crc_basic in a loop. In all failure cases _wait_for() was pre-empted for >3ms and so in the worst case - when the pre-emption happened right after calculating timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only once which failed and so _wait_for() timed out. As opposed to this the spec says to keep retrying the request for at most a 3ms period. To fix this send the first request explicitly to guarantee that there is 3ms between the first and last request. Though this matches the spec, I noticed that in rare cases this can still time out if we sent only a few requests (in the worst case 2) _and_ PCODE is busy for some reason even after a previous request and a 3ms delay. To work around this retry the polling with pre-emption disabled to maximize the number of requests. Also increase the timeout to 10ms to account for interrupts that could reduce the number of requests. With this change I couldn't trigger the problem. v2: - Use 1ms poll period instead of 10us. (Chris) v3: - Poll with pre-emption disabled to increase the number of request attempts. (Ville, Chris) - Factor out a helper to poll, it's also needed by the next patch. v4: - Pass reply_mask, reply to skl_pcode_request(), instead of assuming the reply is generic. (Ville) v5: - List the request specific timeout values as code comment. (Ville) v6: - Try the poll first with preemption enabled. - Add code comment about first request being queued by PCODE. (Art) - Add timeout_base_ms argument. (Ville) v7: - Clarify code comment about first queued request. (Chris) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Art Runyan <arthur.j.runyan@intel.com> Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms Cc: <stable@vger.kernel.org> # v4.2- Fixes: 5d96d8afcfbb ("drm/i915/skl: Deinit/init the display at suspend/resume") Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929 Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com
2016-12-05 09:27:37 -07:00
* The request is acknowledged once the PCODE reply dword equals @reply after
* applying @reply_mask. Polling is first attempted with preemption enabled
* for @timeout_base_ms and if this times out for another 50 ms with
drm/i915/gen9: Fix PCODE polling during CDCLK change notification commit 848496e5902833600f7992f4faa82dc1546051ba Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Jul 13 16:32:03 2016 +0300 drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL increased the timeout to match the spec, but we still see a timeout on at least one SKL. A CDCLK change request following the failed one will succeed nevertheless. I could reproduce this problem easily by running kms_pipe_crc_basic in a loop. In all failure cases _wait_for() was pre-empted for >3ms and so in the worst case - when the pre-emption happened right after calculating timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only once which failed and so _wait_for() timed out. As opposed to this the spec says to keep retrying the request for at most a 3ms period. To fix this send the first request explicitly to guarantee that there is 3ms between the first and last request. Though this matches the spec, I noticed that in rare cases this can still time out if we sent only a few requests (in the worst case 2) _and_ PCODE is busy for some reason even after a previous request and a 3ms delay. To work around this retry the polling with pre-emption disabled to maximize the number of requests. Also increase the timeout to 10ms to account for interrupts that could reduce the number of requests. With this change I couldn't trigger the problem. v2: - Use 1ms poll period instead of 10us. (Chris) v3: - Poll with pre-emption disabled to increase the number of request attempts. (Ville, Chris) - Factor out a helper to poll, it's also needed by the next patch. v4: - Pass reply_mask, reply to skl_pcode_request(), instead of assuming the reply is generic. (Ville) v5: - List the request specific timeout values as code comment. (Ville) v6: - Try the poll first with preemption enabled. - Add code comment about first request being queued by PCODE. (Art) - Add timeout_base_ms argument. (Ville) v7: - Clarify code comment about first queued request. (Chris) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Art Runyan <arthur.j.runyan@intel.com> Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms Cc: <stable@vger.kernel.org> # v4.2- Fixes: 5d96d8afcfbb ("drm/i915/skl: Deinit/init the display at suspend/resume") Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929 Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com
2016-12-05 09:27:37 -07:00
* preemption disabled.
*
* Returns 0 on success, %-ETIMEDOUT in case of a timeout, <0 in case of some
* other error as reported by PCODE.
*/
int skl_pcode_request(struct drm_i915_private *dev_priv, u32 mbox, u32 request,
u32 reply_mask, u32 reply, int timeout_base_ms)
{
u32 status;
int ret;
WARN_ON(!mutex_is_locked(&dev_priv->pcu_lock));
drm/i915/gen9: Fix PCODE polling during CDCLK change notification commit 848496e5902833600f7992f4faa82dc1546051ba Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Jul 13 16:32:03 2016 +0300 drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL increased the timeout to match the spec, but we still see a timeout on at least one SKL. A CDCLK change request following the failed one will succeed nevertheless. I could reproduce this problem easily by running kms_pipe_crc_basic in a loop. In all failure cases _wait_for() was pre-empted for >3ms and so in the worst case - when the pre-emption happened right after calculating timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only once which failed and so _wait_for() timed out. As opposed to this the spec says to keep retrying the request for at most a 3ms period. To fix this send the first request explicitly to guarantee that there is 3ms between the first and last request. Though this matches the spec, I noticed that in rare cases this can still time out if we sent only a few requests (in the worst case 2) _and_ PCODE is busy for some reason even after a previous request and a 3ms delay. To work around this retry the polling with pre-emption disabled to maximize the number of requests. Also increase the timeout to 10ms to account for interrupts that could reduce the number of requests. With this change I couldn't trigger the problem. v2: - Use 1ms poll period instead of 10us. (Chris) v3: - Poll with pre-emption disabled to increase the number of request attempts. (Ville, Chris) - Factor out a helper to poll, it's also needed by the next patch. v4: - Pass reply_mask, reply to skl_pcode_request(), instead of assuming the reply is generic. (Ville) v5: - List the request specific timeout values as code comment. (Ville) v6: - Try the poll first with preemption enabled. - Add code comment about first request being queued by PCODE. (Art) - Add timeout_base_ms argument. (Ville) v7: - Clarify code comment about first queued request. (Chris) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Art Runyan <arthur.j.runyan@intel.com> Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms Cc: <stable@vger.kernel.org> # v4.2- Fixes: 5d96d8afcfbb ("drm/i915/skl: Deinit/init the display at suspend/resume") Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929 Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com
2016-12-05 09:27:37 -07:00
#define COND skl_pcode_try_request(dev_priv, mbox, request, reply_mask, reply, \
&status)
/*
* Prime the PCODE by doing a request first. Normally it guarantees
* that a subsequent request, at most @timeout_base_ms later, succeeds.
* _wait_for() doesn't guarantee when its passed condition is evaluated
* first, so send the first request explicitly.
*/
if (COND) {
ret = 0;
goto out;
}
ret = _wait_for(COND, timeout_base_ms * 1000, 10, 10);
drm/i915/gen9: Fix PCODE polling during CDCLK change notification commit 848496e5902833600f7992f4faa82dc1546051ba Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Jul 13 16:32:03 2016 +0300 drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL increased the timeout to match the spec, but we still see a timeout on at least one SKL. A CDCLK change request following the failed one will succeed nevertheless. I could reproduce this problem easily by running kms_pipe_crc_basic in a loop. In all failure cases _wait_for() was pre-empted for >3ms and so in the worst case - when the pre-emption happened right after calculating timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only once which failed and so _wait_for() timed out. As opposed to this the spec says to keep retrying the request for at most a 3ms period. To fix this send the first request explicitly to guarantee that there is 3ms between the first and last request. Though this matches the spec, I noticed that in rare cases this can still time out if we sent only a few requests (in the worst case 2) _and_ PCODE is busy for some reason even after a previous request and a 3ms delay. To work around this retry the polling with pre-emption disabled to maximize the number of requests. Also increase the timeout to 10ms to account for interrupts that could reduce the number of requests. With this change I couldn't trigger the problem. v2: - Use 1ms poll period instead of 10us. (Chris) v3: - Poll with pre-emption disabled to increase the number of request attempts. (Ville, Chris) - Factor out a helper to poll, it's also needed by the next patch. v4: - Pass reply_mask, reply to skl_pcode_request(), instead of assuming the reply is generic. (Ville) v5: - List the request specific timeout values as code comment. (Ville) v6: - Try the poll first with preemption enabled. - Add code comment about first request being queued by PCODE. (Art) - Add timeout_base_ms argument. (Ville) v7: - Clarify code comment about first queued request. (Chris) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Art Runyan <arthur.j.runyan@intel.com> Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms Cc: <stable@vger.kernel.org> # v4.2- Fixes: 5d96d8afcfbb ("drm/i915/skl: Deinit/init the display at suspend/resume") Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929 Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com
2016-12-05 09:27:37 -07:00
if (!ret)
goto out;
/*
* The above can time out if the number of requests was low (2 in the
* worst case) _and_ PCODE was busy for some reason even after a
* (queued) request and @timeout_base_ms delay. As a workaround retry
* the poll with preemption disabled to maximize the number of
* requests. Increase the timeout from @timeout_base_ms to 50ms to
drm/i915/gen9: Fix PCODE polling during CDCLK change notification commit 848496e5902833600f7992f4faa82dc1546051ba Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Jul 13 16:32:03 2016 +0300 drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL increased the timeout to match the spec, but we still see a timeout on at least one SKL. A CDCLK change request following the failed one will succeed nevertheless. I could reproduce this problem easily by running kms_pipe_crc_basic in a loop. In all failure cases _wait_for() was pre-empted for >3ms and so in the worst case - when the pre-emption happened right after calculating timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only once which failed and so _wait_for() timed out. As opposed to this the spec says to keep retrying the request for at most a 3ms period. To fix this send the first request explicitly to guarantee that there is 3ms between the first and last request. Though this matches the spec, I noticed that in rare cases this can still time out if we sent only a few requests (in the worst case 2) _and_ PCODE is busy for some reason even after a previous request and a 3ms delay. To work around this retry the polling with pre-emption disabled to maximize the number of requests. Also increase the timeout to 10ms to account for interrupts that could reduce the number of requests. With this change I couldn't trigger the problem. v2: - Use 1ms poll period instead of 10us. (Chris) v3: - Poll with pre-emption disabled to increase the number of request attempts. (Ville, Chris) - Factor out a helper to poll, it's also needed by the next patch. v4: - Pass reply_mask, reply to skl_pcode_request(), instead of assuming the reply is generic. (Ville) v5: - List the request specific timeout values as code comment. (Ville) v6: - Try the poll first with preemption enabled. - Add code comment about first request being queued by PCODE. (Art) - Add timeout_base_ms argument. (Ville) v7: - Clarify code comment about first queued request. (Chris) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Art Runyan <arthur.j.runyan@intel.com> Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms Cc: <stable@vger.kernel.org> # v4.2- Fixes: 5d96d8afcfbb ("drm/i915/skl: Deinit/init the display at suspend/resume") Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929 Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com
2016-12-05 09:27:37 -07:00
* account for interrupts that could reduce the number of these
* requests, and for any quirks of the PCODE firmware that delays
* the request completion.
drm/i915/gen9: Fix PCODE polling during CDCLK change notification commit 848496e5902833600f7992f4faa82dc1546051ba Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Jul 13 16:32:03 2016 +0300 drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL increased the timeout to match the spec, but we still see a timeout on at least one SKL. A CDCLK change request following the failed one will succeed nevertheless. I could reproduce this problem easily by running kms_pipe_crc_basic in a loop. In all failure cases _wait_for() was pre-empted for >3ms and so in the worst case - when the pre-emption happened right after calculating timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only once which failed and so _wait_for() timed out. As opposed to this the spec says to keep retrying the request for at most a 3ms period. To fix this send the first request explicitly to guarantee that there is 3ms between the first and last request. Though this matches the spec, I noticed that in rare cases this can still time out if we sent only a few requests (in the worst case 2) _and_ PCODE is busy for some reason even after a previous request and a 3ms delay. To work around this retry the polling with pre-emption disabled to maximize the number of requests. Also increase the timeout to 10ms to account for interrupts that could reduce the number of requests. With this change I couldn't trigger the problem. v2: - Use 1ms poll period instead of 10us. (Chris) v3: - Poll with pre-emption disabled to increase the number of request attempts. (Ville, Chris) - Factor out a helper to poll, it's also needed by the next patch. v4: - Pass reply_mask, reply to skl_pcode_request(), instead of assuming the reply is generic. (Ville) v5: - List the request specific timeout values as code comment. (Ville) v6: - Try the poll first with preemption enabled. - Add code comment about first request being queued by PCODE. (Art) - Add timeout_base_ms argument. (Ville) v7: - Clarify code comment about first queued request. (Chris) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Art Runyan <arthur.j.runyan@intel.com> Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms Cc: <stable@vger.kernel.org> # v4.2- Fixes: 5d96d8afcfbb ("drm/i915/skl: Deinit/init the display at suspend/resume") Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929 Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com
2016-12-05 09:27:37 -07:00
*/
DRM_DEBUG_KMS("PCODE timeout, retrying with preemption disabled\n");
WARN_ON_ONCE(timeout_base_ms > 3);
preempt_disable();
ret = wait_for_atomic(COND, 50);
drm/i915/gen9: Fix PCODE polling during CDCLK change notification commit 848496e5902833600f7992f4faa82dc1546051ba Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Jul 13 16:32:03 2016 +0300 drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL increased the timeout to match the spec, but we still see a timeout on at least one SKL. A CDCLK change request following the failed one will succeed nevertheless. I could reproduce this problem easily by running kms_pipe_crc_basic in a loop. In all failure cases _wait_for() was pre-empted for >3ms and so in the worst case - when the pre-emption happened right after calculating timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only once which failed and so _wait_for() timed out. As opposed to this the spec says to keep retrying the request for at most a 3ms period. To fix this send the first request explicitly to guarantee that there is 3ms between the first and last request. Though this matches the spec, I noticed that in rare cases this can still time out if we sent only a few requests (in the worst case 2) _and_ PCODE is busy for some reason even after a previous request and a 3ms delay. To work around this retry the polling with pre-emption disabled to maximize the number of requests. Also increase the timeout to 10ms to account for interrupts that could reduce the number of requests. With this change I couldn't trigger the problem. v2: - Use 1ms poll period instead of 10us. (Chris) v3: - Poll with pre-emption disabled to increase the number of request attempts. (Ville, Chris) - Factor out a helper to poll, it's also needed by the next patch. v4: - Pass reply_mask, reply to skl_pcode_request(), instead of assuming the reply is generic. (Ville) v5: - List the request specific timeout values as code comment. (Ville) v6: - Try the poll first with preemption enabled. - Add code comment about first request being queued by PCODE. (Art) - Add timeout_base_ms argument. (Ville) v7: - Clarify code comment about first queued request. (Chris) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Art Runyan <arthur.j.runyan@intel.com> Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms Cc: <stable@vger.kernel.org> # v4.2- Fixes: 5d96d8afcfbb ("drm/i915/skl: Deinit/init the display at suspend/resume") Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929 Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com
2016-12-05 09:27:37 -07:00
preempt_enable();
out:
return ret ? ret : status;
#undef COND
}
static int byt_gpu_freq(struct drm_i915_private *dev_priv, int val)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
/*
* N = val - 0xb7
* Slow = Fast = GPLL ref * N
*/
return DIV_ROUND_CLOSEST(rps->gpll_ref_freq * (val - 0xb7), 1000);
}
static int byt_freq_opcode(struct drm_i915_private *dev_priv, int val)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
return DIV_ROUND_CLOSEST(1000 * val, rps->gpll_ref_freq) + 0xb7;
}
static int chv_gpu_freq(struct drm_i915_private *dev_priv, int val)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
/*
* N = val / 2
* CU (slow) = CU2x (fast) / 2 = GPLL ref * N / 2
*/
return DIV_ROUND_CLOSEST(rps->gpll_ref_freq * val, 2 * 2 * 1000);
}
static int chv_freq_opcode(struct drm_i915_private *dev_priv, int val)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
/* CHV needs even values */
return DIV_ROUND_CLOSEST(2 * 1000 * val, rps->gpll_ref_freq) * 2;
}
int intel_gpu_freq(struct drm_i915_private *dev_priv, int val)
{
if (INTEL_GEN(dev_priv) >= 9)
return DIV_ROUND_CLOSEST(val * GT_FREQUENCY_MULTIPLIER,
GEN9_FREQ_SCALER);
else if (IS_CHERRYVIEW(dev_priv))
return chv_gpu_freq(dev_priv, val);
else if (IS_VALLEYVIEW(dev_priv))
return byt_gpu_freq(dev_priv, val);
else
return val * GT_FREQUENCY_MULTIPLIER;
}
int intel_freq_opcode(struct drm_i915_private *dev_priv, int val)
{
if (INTEL_GEN(dev_priv) >= 9)
return DIV_ROUND_CLOSEST(val * GEN9_FREQ_SCALER,
GT_FREQUENCY_MULTIPLIER);
else if (IS_CHERRYVIEW(dev_priv))
return chv_freq_opcode(dev_priv, val);
else if (IS_VALLEYVIEW(dev_priv))
return byt_freq_opcode(dev_priv, val);
else
return DIV_ROUND_CLOSEST(val, GT_FREQUENCY_MULTIPLIER);
}
void intel_pm_setup(struct drm_i915_private *dev_priv)
{
mutex_init(&dev_priv->pcu_lock);
drm/i915: Interactive RPS mode RPS provides a feedback loop where we use the load during the previous evaluation interval to decide whether to up or down clock the GPU frequency. Our responsiveness is split into 3 regimes, a high and low plateau with the intent to keep the gpu clocked high to cover occasional stalls under high load, and low despite occasional glitches under steady low load, and inbetween. However, we run into situations like kodi where we want to stay at low power (video decoding is done efficiently inside the fixed function HW and doesn't need high clocks even for high bitrate streams), but just occasionally the pipeline is more complex than a video decode and we need a smidgen of extra GPU power to present on time. In the high power regime, we sample at sub frame intervals with a bias to upclocking, and conversely at low power we sample over a few frames worth to provide what we consider to be the right levels of responsiveness respectively. At low power, we more or less expect to be kicked out to high power at the start of a busy sequence by waitboosting. Prior to commit e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request") whenever we missed the frame or stalled, we would immediate go full throttle and upclock the GPU to max. But in commit e9af4ea2b9e7, we relaxed the waitboosting to only apply if the pipeline was deep to avoid over-committing resources for a near miss. Sadly though, a near miss is still a miss, and perceptible as jitter in the frame delivery. To try and prevent the near miss before having to resort to boosting after the fact, we use the pageflip queue as an indication that we are in an "interactive" regime and so should sample the load more frequently to provide power before the frame misses it vblank. This will make us more favorable to providing a small power increase (one or two bins) as required rather than going all the way to maximum and then having to work back down again. (We still keep the waitboosting mechanism around just in case a dramatic change in system load requires urgent uplocking, faster than we can provide in a few evaluation intervals.) v2: Reduce rps_set_interactive to a boolean parameter to avoid the confusion of what if they wanted a new power mode after pinning to a different mode (which to choose?) v3: Only reprogram RPS while the GT is awake, it will be set when we wake the GT, and while off warns about being used outside of rpm. v4: Fix deferred application of interactive mode v5: s/state/interactive/ v6: Group the mutex with its principle in a substruct Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107111 Fixes: e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180731132629.3381-1-chris@chris-wilson.co.uk
2018-07-31 07:26:29 -06:00
mutex_init(&dev_priv->gt_pm.rps.power.mutex);
atomic_set(&dev_priv->gt_pm.rps.num_waiters, 0);
dev_priv->runtime_pm.suspended = false;
atomic_set(&dev_priv->runtime_pm.wakeref_count, 0);
}
static u64 vlv_residency_raw(struct drm_i915_private *dev_priv,
const i915_reg_t reg)
{
u32 lower, upper, tmp;
int loop = 2;
/*
* The register accessed do not need forcewake. We borrow
* uncore lock to prevent concurrent access to range reg.
*/
lockdep_assert_held(&dev_priv->uncore.lock);
/*
* vlv and chv residency counters are 40 bits in width.
* With a control bit, we can choose between upper or lower
* 32bit window into this counter.
*
* Although we always use the counter in high-range mode elsewhere,
* userspace may attempt to read the value before rc6 is initialised,
* before we have set the default VLV_COUNTER_CONTROL value. So always
* set the high bit to be safe.
*/
I915_WRITE_FW(VLV_COUNTER_CONTROL,
_MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH));
upper = I915_READ_FW(reg);
do {
tmp = upper;
I915_WRITE_FW(VLV_COUNTER_CONTROL,
_MASKED_BIT_DISABLE(VLV_COUNT_RANGE_HIGH));
lower = I915_READ_FW(reg);
I915_WRITE_FW(VLV_COUNTER_CONTROL,
_MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH));
upper = I915_READ_FW(reg);
} while (upper != tmp && --loop);
/*
* Everywhere else we always use VLV_COUNTER_CONTROL with the
* VLV_COUNT_RANGE_HIGH bit set - so it is safe to leave it set
* now.
*/
return lower | (u64)upper << 8;
}
u64 intel_rc6_residency_ns(struct drm_i915_private *dev_priv,
const i915_reg_t reg)
{
u64 time_hw, prev_hw, overflow_hw;
unsigned int fw_domains;
unsigned long flags;
unsigned int i;
u32 mul, div;
if (!HAS_RC6(dev_priv))
return 0;
/*
* Store previous hw counter values for counter wrap-around handling.
*
* There are only four interesting registers and they live next to each
* other so we can use the relative address, compared to the smallest
* one as the index into driver storage.
*/
i = (i915_mmio_reg_offset(reg) -
i915_mmio_reg_offset(GEN6_GT_GFX_RC6_LOCKED)) / sizeof(u32);
if (WARN_ON_ONCE(i >= ARRAY_SIZE(dev_priv->gt_pm.rc6.cur_residency)))
return 0;
fw_domains = intel_uncore_forcewake_for_reg(dev_priv, reg, FW_REG_READ);
spin_lock_irqsave(&dev_priv->uncore.lock, flags);
intel_uncore_forcewake_get__locked(dev_priv, fw_domains);
/* On VLV and CHV, residency time is in CZ units rather than 1.28us */
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
mul = 1000000;
div = dev_priv->czclk_freq;
overflow_hw = BIT_ULL(40);
time_hw = vlv_residency_raw(dev_priv, reg);
} else {
/* 833.33ns units on Gen9LP, 1.28us elsewhere. */
if (IS_GEN9_LP(dev_priv)) {
mul = 10000;
div = 12;
} else {
mul = 1280;
div = 1;
}
overflow_hw = BIT_ULL(32);
time_hw = I915_READ_FW(reg);
}
/*
* Counter wrap handling.
*
* But relying on a sufficient frequency of queries otherwise counters
* can still wrap.
*/
prev_hw = dev_priv->gt_pm.rc6.prev_hw_residency[i];
dev_priv->gt_pm.rc6.prev_hw_residency[i] = time_hw;
/* RC6 delta from last sample. */
if (time_hw >= prev_hw)
time_hw -= prev_hw;
else
time_hw += overflow_hw - prev_hw;
/* Add delta to RC6 extended raw driver copy. */
time_hw += dev_priv->gt_pm.rc6.cur_residency[i];
dev_priv->gt_pm.rc6.cur_residency[i] = time_hw;
intel_uncore_forcewake_put__locked(dev_priv, fw_domains);
spin_unlock_irqrestore(&dev_priv->uncore.lock, flags);
return mul_u64_u32_div(time_hw, mul, div);
}
u32 intel_get_cagf(struct drm_i915_private *dev_priv, u32 rpstat)
{
u32 cagf;
if (INTEL_GEN(dev_priv) >= 9)
cagf = (rpstat & GEN9_CAGF_MASK) >> GEN9_CAGF_SHIFT;
else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
cagf = (rpstat & HSW_CAGF_MASK) >> HSW_CAGF_SHIFT;
else
cagf = (rpstat & GEN6_CAGF_MASK) >> GEN6_CAGF_SHIFT;
return cagf;
}