1
0
Fork 0
alistair23-linux/drivers/infiniband/sw/rxe/rxe_verbs.h

472 lines
9.5 KiB
C
Raw Normal View History

Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 07:45:23 -06:00
/*
* Copyright (c) 2016 Mellanox Technologies Ltd. All rights reserved.
* Copyright (c) 2015 System Fabric Works, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef RXE_VERBS_H
#define RXE_VERBS_H
#include <linux/interrupt.h>
#include <linux/workqueue.h>
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 07:45:23 -06:00
#include <rdma/rdma_user_rxe.h>
#include "rxe_pool.h"
#include "rxe_task.h"
IB/rxe: Add port protocol stats Expose new counters using the get_hw_stats callback. We expose the following counters: +---------------------+----------------------------------------+ | Name | Description | |---------------------+----------------------------------------| |sent_pkts | number of sent pkts | |---------------------+----------------------------------------| |rcvd_pkts | number of received packets | |---------------------+----------------------------------------| |out_of_sequence | number of errors due to packet | | | transport sequence number | |---------------------+----------------------------------------| |duplicate_request | number of received duplicated packets. | | | A request that previously executed is | | | named duplicated. | |---------------------+----------------------------------------| |rcvd_rnr_err | number of received RNR by completer | |---------------------+----------------------------------------| |send_rnr_err | number of sent RNR by responder | |---------------------+----------------------------------------| |rcvd_seq_err | number of out of sequence packets | | | received | |---------------------+----------------------------------------| |ack_deffered | number of deferred handling of ack | | | packets. | |---------------------+----------------------------------------| |retry_exceeded_err | number of times retry exceeded | |---------------------+----------------------------------------| |completer_retry_err | number of times completer decided to | | | retry | |---------------------+----------------------------------------| |send_err | number of failed send packet | +---------------------+----------------------------------------+ Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-03-10 09:23:56 -07:00
#include "rxe_hw_counters.h"
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 07:45:23 -06:00
static inline int pkey_match(u16 key1, u16 key2)
{
return (((key1 & 0x7fff) != 0) &&
((key1 & 0x7fff) == (key2 & 0x7fff)) &&
((key1 & 0x8000) || (key2 & 0x8000))) ? 1 : 0;
}
/* Return >0 if psn_a > psn_b
* 0 if psn_a == psn_b
* <0 if psn_a < psn_b
*/
static inline int psn_compare(u32 psn_a, u32 psn_b)
{
s32 diff;
diff = (psn_a - psn_b) << 8;
return diff;
}
struct rxe_ucontext {
struct rxe_pool_entry pelem;
struct ib_ucontext ibuc;
};
struct rxe_pd {
struct ib_pd ibpd;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 07:45:23 -06:00
struct rxe_pool_entry pelem;
};
struct rxe_ah {
struct rxe_pool_entry pelem;
struct ib_ah ibah;
struct rxe_pd *pd;
struct rxe_av av;
};
struct rxe_cqe {
union {
struct ib_wc ibwc;
struct ib_uverbs_wc uibwc;
};
};
struct rxe_cq {
struct rxe_pool_entry pelem;
struct ib_cq ibcq;
struct rxe_queue *queue;
spinlock_t cq_lock;
u8 notify;
bool is_dying;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 07:45:23 -06:00
int is_user;
struct tasklet_struct comp_task;
};
enum wqe_state {
wqe_state_posted,
wqe_state_processing,
wqe_state_pending,
wqe_state_done,
wqe_state_error,
};
struct rxe_sq {
int max_wr;
int max_sge;
int max_inline;
spinlock_t sq_lock; /* guard queue */
struct rxe_queue *queue;
};
struct rxe_rq {
int max_wr;
int max_sge;
spinlock_t producer_lock; /* guard queue producer */
spinlock_t consumer_lock; /* guard queue consumer */
struct rxe_queue *queue;
};
struct rxe_srq {
struct rxe_pool_entry pelem;
struct ib_srq ibsrq;
struct rxe_pd *pd;
struct rxe_rq rq;
u32 srq_num;
int limit;
int error;
};
enum rxe_qp_state {
QP_STATE_RESET,
QP_STATE_INIT,
QP_STATE_READY,
QP_STATE_DRAIN, /* req only */
QP_STATE_DRAINED, /* req only */
QP_STATE_ERROR
};
struct rxe_req_info {
enum rxe_qp_state state;
int wqe_index;
u32 psn;
int opcode;
atomic_t rd_atomic;
int wait_fence;
int need_rd_atomic;
int wait_psn;
int need_retry;
int noack_pkts;
struct rxe_task task;
};
struct rxe_comp_info {
u32 psn;
int opcode;
int timeout;
int timeout_retry;
int started_retry;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 07:45:23 -06:00
u32 retry_cnt;
u32 rnr_retry;
struct rxe_task task;
};
enum rdatm_res_state {
rdatm_res_state_next,
rdatm_res_state_new,
rdatm_res_state_replay,
};
struct resp_res {
int type;
IB/rxe: fix for duplicate request processing and ack psns Don't reset the resp opcode for a replayed read response. The resp opcode could be in the middle of a write or send sequence, when the duplicate read request was received. An example sequence is as follows: - Receive read request for 12KB PSN 20. Transmit read response first, middle and last with PSNs 20,21,22. - Receive write first PSN 23. At this point the resp psn is 24 and resp opcode is write first. - The sender notices that PSN 20 is dropped and retransmits. Receive read request for 12KB PSN 20. Transmit read response first, middle and last with PSNs 20,21,22. The resp opcode is set to -1, the resp psn remains 24. - Receive write first PSN 23. This is processed by duplicate_request(). The resp opcode remains -1 and resp psn remains 24. - Receive write middle PSN 24. check_op_seq() reports a missing first error since the resp opcode is -1. When sending an ack for a duplicate send or write request, use the psn of the previous ack sent. Do not use the psn of a read response for the ack. An example sequence is as follows: - Receive write PSN 30. Transmit ACK for PSN 30. - Receive read request 4KB PSN 31. Transmit read response with PSN 31. The resp psn is now 32. - The sender notices that PSN 30 is dropped and retransmits. Receive write PSN 30. duplicate_request() sends an ACK with PSN 31. That is incorrect since PSN 31 was a read request. Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-06-12 19:20:49 -06:00
int replay;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 07:45:23 -06:00
u32 first_psn;
u32 last_psn;
u32 cur_psn;
enum rdatm_res_state state;
union {
struct {
struct sk_buff *skb;
} atomic;
struct {
struct rxe_mem *mr;
u64 va_org;
u32 rkey;
u32 length;
u64 va;
u32 resid;
} read;
};
};
struct rxe_resp_info {
enum rxe_qp_state state;
u32 msn;
u32 psn;
IB/rxe: fix for duplicate request processing and ack psns Don't reset the resp opcode for a replayed read response. The resp opcode could be in the middle of a write or send sequence, when the duplicate read request was received. An example sequence is as follows: - Receive read request for 12KB PSN 20. Transmit read response first, middle and last with PSNs 20,21,22. - Receive write first PSN 23. At this point the resp psn is 24 and resp opcode is write first. - The sender notices that PSN 20 is dropped and retransmits. Receive read request for 12KB PSN 20. Transmit read response first, middle and last with PSNs 20,21,22. The resp opcode is set to -1, the resp psn remains 24. - Receive write first PSN 23. This is processed by duplicate_request(). The resp opcode remains -1 and resp psn remains 24. - Receive write middle PSN 24. check_op_seq() reports a missing first error since the resp opcode is -1. When sending an ack for a duplicate send or write request, use the psn of the previous ack sent. Do not use the psn of a read response for the ack. An example sequence is as follows: - Receive write PSN 30. Transmit ACK for PSN 30. - Receive read request 4KB PSN 31. Transmit read response with PSN 31. The resp psn is now 32. - The sender notices that PSN 30 is dropped and retransmits. Receive write PSN 30. duplicate_request() sends an ACK with PSN 31. That is incorrect since PSN 31 was a read request. Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-06-12 19:20:49 -06:00
u32 ack_psn;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 07:45:23 -06:00
int opcode;
int drop_msg;
int goto_error;
int sent_psn_nak;
enum ib_wc_status status;
u8 aeth_syndrome;
/* Receive only */
struct rxe_recv_wqe *wqe;
/* RDMA read / atomic only */
u64 va;
struct rxe_mem *mr;
u32 resid;
u32 rkey;
u64 atomic_orig;
/* SRQ only */
struct {
struct rxe_recv_wqe wqe;
struct ib_sge sge[RXE_MAX_SGE];
} srq_wqe;
/* Responder resources. It's a circular list where the oldest
* resource is dropped first.
*/
struct resp_res *resources;
unsigned int res_head;
unsigned int res_tail;
struct resp_res *res;
struct rxe_task task;
};
struct rxe_qp {
struct rxe_pool_entry pelem;
struct ib_qp ibqp;
struct ib_qp_attr attr;
unsigned int valid;
unsigned int mtu;
int is_user;
struct rxe_pd *pd;
struct rxe_srq *srq;
struct rxe_cq *scq;
struct rxe_cq *rcq;
enum ib_sig_type sq_sig_type;
struct rxe_sq sq;
struct rxe_rq rq;
struct socket *sk;
u32 dst_cookie;
u16 src_port;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 07:45:23 -06:00
struct rxe_av pri_av;
struct rxe_av alt_av;
/* list of mcast groups qp has joined (for cleanup) */
struct list_head grp_list;
spinlock_t grp_lock; /* guard grp_list */
struct sk_buff_head req_pkts;
struct sk_buff_head resp_pkts;
struct sk_buff_head send_pkts;
struct rxe_req_info req;
struct rxe_comp_info comp;
struct rxe_resp_info resp;
atomic_t ssn;
atomic_t skb_out;
int need_req_skb;
/* Timer for retranmitting packet when ACKs have been lost. RC
* only. The requester sets it when it is not already
* started. The responder resets it whenever an ack is
* received.
*/
struct timer_list retrans_timer;
u64 qp_timeout_jiffies;
/* Timer for handling RNR NAKS. */
struct timer_list rnr_nak_timer;
spinlock_t state_lock; /* guard requester and completer */
struct execute_work cleanup_work;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 07:45:23 -06:00
};
enum rxe_mem_state {
RXE_MEM_STATE_ZOMBIE,
RXE_MEM_STATE_INVALID,
RXE_MEM_STATE_FREE,
RXE_MEM_STATE_VALID,
};
enum rxe_mem_type {
RXE_MEM_TYPE_NONE,
RXE_MEM_TYPE_DMA,
RXE_MEM_TYPE_MR,
RXE_MEM_TYPE_FMR,
RXE_MEM_TYPE_MW,
};
#define RXE_BUF_PER_MAP (PAGE_SIZE / sizeof(struct rxe_phys_buf))
struct rxe_phys_buf {
u64 addr;
u64 size;
};
struct rxe_map {
struct rxe_phys_buf buf[RXE_BUF_PER_MAP];
};
struct rxe_mem {
struct rxe_pool_entry pelem;
union {
struct ib_mr ibmr;
struct ib_mw ibmw;
};
struct rxe_pd *pd;
struct ib_umem *umem;
u32 lkey;
u32 rkey;
enum rxe_mem_state state;
enum rxe_mem_type type;
u64 va;
u64 iova;
size_t length;
u32 offset;
int access;
int page_shift;
int page_mask;
int map_shift;
int map_mask;
u32 num_buf;
u32 nbuf;
u32 max_buf;
u32 num_map;
struct rxe_map **map;
};
struct rxe_mc_grp {
struct rxe_pool_entry pelem;
spinlock_t mcg_lock; /* guard group */
struct rxe_dev *rxe;
struct list_head qp_list;
union ib_gid mgid;
int num_qp;
u32 qkey;
u16 pkey;
};
struct rxe_mc_elem {
struct rxe_pool_entry pelem;
struct list_head qp_list;
struct list_head grp_list;
struct rxe_qp *qp;
struct rxe_mc_grp *grp;
};
struct rxe_port {
struct ib_port_attr attr;
u16 *pkey_tbl;
__be64 port_guid;
__be64 subnet_prefix;
spinlock_t port_lock; /* guard port */
unsigned int mtu_cap;
/* special QPs */
u32 qp_smi_index;
u32 qp_gsi_index;
};
struct rxe_dev {
struct ib_device ib_dev;
struct ib_device_attr attr;
int max_ucontext;
int max_inline_data;
struct mutex usdev_lock;
struct net_device *ndev;
int xmit_errors;
struct rxe_pool uc_pool;
struct rxe_pool pd_pool;
struct rxe_pool ah_pool;
struct rxe_pool srq_pool;
struct rxe_pool qp_pool;
struct rxe_pool cq_pool;
struct rxe_pool mr_pool;
struct rxe_pool mw_pool;
struct rxe_pool mc_grp_pool;
struct rxe_pool mc_elem_pool;
spinlock_t pending_lock; /* guard pending_mmaps */
struct list_head pending_mmaps;
spinlock_t mmap_offset_lock; /* guard mmap_offset */
int mmap_offset;
atomic64_t stats_counters[RXE_NUM_OF_COUNTERS];
IB/rxe: Add port protocol stats Expose new counters using the get_hw_stats callback. We expose the following counters: +---------------------+----------------------------------------+ | Name | Description | |---------------------+----------------------------------------| |sent_pkts | number of sent pkts | |---------------------+----------------------------------------| |rcvd_pkts | number of received packets | |---------------------+----------------------------------------| |out_of_sequence | number of errors due to packet | | | transport sequence number | |---------------------+----------------------------------------| |duplicate_request | number of received duplicated packets. | | | A request that previously executed is | | | named duplicated. | |---------------------+----------------------------------------| |rcvd_rnr_err | number of received RNR by completer | |---------------------+----------------------------------------| |send_rnr_err | number of sent RNR by responder | |---------------------+----------------------------------------| |rcvd_seq_err | number of out of sequence packets | | | received | |---------------------+----------------------------------------| |ack_deffered | number of deferred handling of ack | | | packets. | |---------------------+----------------------------------------| |retry_exceeded_err | number of times retry exceeded | |---------------------+----------------------------------------| |completer_retry_err | number of times completer decided to | | | retry | |---------------------+----------------------------------------| |send_err | number of failed send packet | +---------------------+----------------------------------------+ Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-03-10 09:23:56 -07:00
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 07:45:23 -06:00
struct rxe_port port;
struct crypto_shash *tfm;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 07:45:23 -06:00
};
static inline void rxe_counter_inc(struct rxe_dev *rxe, enum rxe_counters index)
IB/rxe: Add port protocol stats Expose new counters using the get_hw_stats callback. We expose the following counters: +---------------------+----------------------------------------+ | Name | Description | |---------------------+----------------------------------------| |sent_pkts | number of sent pkts | |---------------------+----------------------------------------| |rcvd_pkts | number of received packets | |---------------------+----------------------------------------| |out_of_sequence | number of errors due to packet | | | transport sequence number | |---------------------+----------------------------------------| |duplicate_request | number of received duplicated packets. | | | A request that previously executed is | | | named duplicated. | |---------------------+----------------------------------------| |rcvd_rnr_err | number of received RNR by completer | |---------------------+----------------------------------------| |send_rnr_err | number of sent RNR by responder | |---------------------+----------------------------------------| |rcvd_seq_err | number of out of sequence packets | | | received | |---------------------+----------------------------------------| |ack_deffered | number of deferred handling of ack | | | packets. | |---------------------+----------------------------------------| |retry_exceeded_err | number of times retry exceeded | |---------------------+----------------------------------------| |completer_retry_err | number of times completer decided to | | | retry | |---------------------+----------------------------------------| |send_err | number of failed send packet | +---------------------+----------------------------------------+ Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-03-10 09:23:56 -07:00
{
atomic64_inc(&rxe->stats_counters[index]);
IB/rxe: Add port protocol stats Expose new counters using the get_hw_stats callback. We expose the following counters: +---------------------+----------------------------------------+ | Name | Description | |---------------------+----------------------------------------| |sent_pkts | number of sent pkts | |---------------------+----------------------------------------| |rcvd_pkts | number of received packets | |---------------------+----------------------------------------| |out_of_sequence | number of errors due to packet | | | transport sequence number | |---------------------+----------------------------------------| |duplicate_request | number of received duplicated packets. | | | A request that previously executed is | | | named duplicated. | |---------------------+----------------------------------------| |rcvd_rnr_err | number of received RNR by completer | |---------------------+----------------------------------------| |send_rnr_err | number of sent RNR by responder | |---------------------+----------------------------------------| |rcvd_seq_err | number of out of sequence packets | | | received | |---------------------+----------------------------------------| |ack_deffered | number of deferred handling of ack | | | packets. | |---------------------+----------------------------------------| |retry_exceeded_err | number of times retry exceeded | |---------------------+----------------------------------------| |completer_retry_err | number of times completer decided to | | | retry | |---------------------+----------------------------------------| |send_err | number of failed send packet | +---------------------+----------------------------------------+ Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-03-10 09:23:56 -07:00
}
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 07:45:23 -06:00
static inline struct rxe_dev *to_rdev(struct ib_device *dev)
{
return dev ? container_of(dev, struct rxe_dev, ib_dev) : NULL;
}
static inline struct rxe_ucontext *to_ruc(struct ib_ucontext *uc)
{
return uc ? container_of(uc, struct rxe_ucontext, ibuc) : NULL;
}
static inline struct rxe_pd *to_rpd(struct ib_pd *pd)
{
return pd ? container_of(pd, struct rxe_pd, ibpd) : NULL;
}
static inline struct rxe_ah *to_rah(struct ib_ah *ah)
{
return ah ? container_of(ah, struct rxe_ah, ibah) : NULL;
}
static inline struct rxe_srq *to_rsrq(struct ib_srq *srq)
{
return srq ? container_of(srq, struct rxe_srq, ibsrq) : NULL;
}
static inline struct rxe_qp *to_rqp(struct ib_qp *qp)
{
return qp ? container_of(qp, struct rxe_qp, ibqp) : NULL;
}
static inline struct rxe_cq *to_rcq(struct ib_cq *cq)
{
return cq ? container_of(cq, struct rxe_cq, ibcq) : NULL;
}
static inline struct rxe_mem *to_rmr(struct ib_mr *mr)
{
return mr ? container_of(mr, struct rxe_mem, ibmr) : NULL;
}
static inline struct rxe_mem *to_rmw(struct ib_mw *mw)
{
return mw ? container_of(mw, struct rxe_mem, ibmw) : NULL;
}
int rxe_register_device(struct rxe_dev *rxe, const char *ibdev_name);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 07:45:23 -06:00
void rxe_mc_cleanup(struct rxe_pool_entry *arg);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 07:45:23 -06:00
#endif /* RXE_VERBS_H */