alistair23-linux/drivers/platform/x86/ideapad-laptop.c

1254 lines
30 KiB
C
Raw Normal View History

/*
* ideapad-laptop.c - Lenovo IdeaPad ACPI Extras
*
* Copyright © 2010 Intel Corporation
* Copyright © 2010 David Woodhouse <dwmw2@infradead.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-02 17:49:16 -07:00
#include <linux/acpi.h>
#include <linux/rfkill.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/input/sparse-keymap.h>
#include <linux/backlight.h>
#include <linux/fb.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/i8042.h>
#include <linux/dmi.h>
#include <linux/device.h>
#include <acpi/video.h>
#define IDEAPAD_RFKILL_DEV_NUM (3)
#define CFG_BT_BIT (16)
#define CFG_3G_BIT (17)
#define CFG_WIFI_BIT (18)
#define CFG_CAMERA_BIT (19)
ideapad-laptop: add support for Yoga 3 ESC key The ideapad-laptop handles most special keys on various Lenovo Laptops including the Yoga line. Unfortunately, the Yoga 3 11/13/14 models have one important exception, which is the Fn-ESC combination. On other Lenovo Laptops, this is FnLock, which switches the function keys between the primary (Mute, Vol down, Vol up, ...) and the secondary (F1, F2, F3, ...) behavior. On the new machines, FnLock is only available through BIOS setup (possibly through a yet-to-be-implemented feature in this driver) but not through Fn-ESC, but instead the ESC key itself switched between ESC and a "Paper Display" app for Windows. Unfortunately, that means that you can never have both ESC *and* the function keys working at the same time without needing to press Fn on one of them. As pointed out in the official Lenovo Forum by dozens of users, this makes the machine rather useless for any serious work [1]. I have now studied the ACPI DSDT one more time and found the event that is generated for the ESC key. Unlike all other key events on this machine, it is actually a WMI, while the other ones are read from the embedded controller. I am now installing a WMI notifier that uses the event number from the WMI subsystem as the scancode. The only event number generated here is '128', and that fits in nicely with the two existing ranges of scancodes used by the EC: 0-15 for the 16-bit VPCCMD_R_VPC register, 16-17 for the VPCCMD_R_NOVO register and 64-67 for VPCCMD_R_SPECIAL_BUTTONS. The only sane way to handle this button (in absence of the Windows Paper Display driver) seems to be to have it emit KEY_ESC, so that is what I use as the default. Should any user ever want to overwrite the default, they can install their own keymap. To ensure that we can still build the driver without adding a CONFIG_WMI dependency, all new code is enclosed in #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [1] https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/YOGA-3-14-How-to-reclaim-my-Esc-key-and-permanently-disable/td-p/2070816 Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-11-06 14:28:49 -07:00
#if IS_ENABLED(CONFIG_ACPI_WMI)
static const char *const ideapad_wmi_fnesc_events[] = {
"26CAB2E5-5CF1-46AE-AAC3-4A12B6BA50E6", /* Yoga 3 */
"56322276-8493-4CE8-A783-98C991274F5E", /* Yoga 700 */
};
ideapad-laptop: add support for Yoga 3 ESC key The ideapad-laptop handles most special keys on various Lenovo Laptops including the Yoga line. Unfortunately, the Yoga 3 11/13/14 models have one important exception, which is the Fn-ESC combination. On other Lenovo Laptops, this is FnLock, which switches the function keys between the primary (Mute, Vol down, Vol up, ...) and the secondary (F1, F2, F3, ...) behavior. On the new machines, FnLock is only available through BIOS setup (possibly through a yet-to-be-implemented feature in this driver) but not through Fn-ESC, but instead the ESC key itself switched between ESC and a "Paper Display" app for Windows. Unfortunately, that means that you can never have both ESC *and* the function keys working at the same time without needing to press Fn on one of them. As pointed out in the official Lenovo Forum by dozens of users, this makes the machine rather useless for any serious work [1]. I have now studied the ACPI DSDT one more time and found the event that is generated for the ESC key. Unlike all other key events on this machine, it is actually a WMI, while the other ones are read from the embedded controller. I am now installing a WMI notifier that uses the event number from the WMI subsystem as the scancode. The only event number generated here is '128', and that fits in nicely with the two existing ranges of scancodes used by the EC: 0-15 for the 16-bit VPCCMD_R_VPC register, 16-17 for the VPCCMD_R_NOVO register and 64-67 for VPCCMD_R_SPECIAL_BUTTONS. The only sane way to handle this button (in absence of the Windows Paper Display driver) seems to be to have it emit KEY_ESC, so that is what I use as the default. Should any user ever want to overwrite the default, they can install their own keymap. To ensure that we can still build the driver without adding a CONFIG_WMI dependency, all new code is enclosed in #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [1] https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/YOGA-3-14-How-to-reclaim-my-Esc-key-and-permanently-disable/td-p/2070816 Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-11-06 14:28:49 -07:00
#endif
enum {
VPCCMD_R_VPC1 = 0x10,
VPCCMD_R_BL_MAX,
VPCCMD_R_BL,
VPCCMD_W_BL,
VPCCMD_R_WIFI,
VPCCMD_W_WIFI,
VPCCMD_R_BT,
VPCCMD_W_BT,
VPCCMD_R_BL_POWER,
VPCCMD_R_NOVO,
VPCCMD_R_VPC2,
VPCCMD_R_TOUCHPAD,
VPCCMD_W_TOUCHPAD,
VPCCMD_R_CAMERA,
VPCCMD_W_CAMERA,
VPCCMD_R_3G,
VPCCMD_W_3G,
VPCCMD_R_ODD, /* 0x21 */
VPCCMD_W_FAN,
VPCCMD_R_RF,
VPCCMD_W_RF,
VPCCMD_R_FAN = 0x2B,
VPCCMD_R_SPECIAL_BUTTONS = 0x31,
VPCCMD_W_BL_POWER = 0x33,
};
struct ideapad_rfk_priv {
int dev;
struct ideapad_private *priv;
};
struct ideapad_private {
struct acpi_device *adev;
struct rfkill *rfk[IDEAPAD_RFKILL_DEV_NUM];
struct ideapad_rfk_priv rfk_priv[IDEAPAD_RFKILL_DEV_NUM];
struct platform_device *platform_device;
struct input_dev *inputdev;
struct backlight_device *blightdev;
struct dentry *debug;
unsigned long cfg;
ideapad-laptop: Change Lenovo Yoga 2 series rfkill handling It seems that the same problems which lead to adding an rfkill blacklist and putting the Lenovo Yoga 2 11 on it are also present on the Lenovo Yoga 2 13 and Lenovo Yoga 2 Pro too: https://bugzilla.redhat.com/show_bug.cgi?id=1021036 https://forums.lenovo.com/t5/Linux-Discussion/Yoga-2-13-not-Pro-Linux-Warning/m-p/1517612 Testing has shown that the firmware rfkill settings are persistent over reboots. So blacklisting the driver is not good enough, if the wifi is blocked at the firmware level the wifi needs to be explictly unblocked through the ideapad-laptop interface. And at least on the Lenovo Yoga 2 13 the VPCCMD_RF register which on devices with hardware kill switch reports the hardware switch state, needs to be explictly set to 1 (radio enabled / not blocked). So this patch does 3 things to get proper rfkill handling on these models: 1) Instead of blacklisting the rfkill functionality, which means that people with a firmware blocked wifi get stuck in that situation, ignore the value reported by the not present hardware rfkill switch, as this is what is causing ideapad-laptop to wrongly report all radios as hardware blocks. But do register the rfkill interfaces so that the user can soft [un]block them. 2) On models without a hardware rfkill switch, explictly set VPCCMD_RF to 1 3) Drop the " 11" postfix from the dmi match string, as the entire Yoga 2 series is affected. Yoga 2 11: Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com> Yoga 2 13: Tested-by: madls05 <http://ubuntuforums.org/showthread.php?t=2215044> Yoga 2 Pro: Reported-and-tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-23 08:45:51 -06:00
bool has_hw_rfkill_switch;
const char *fnesc_guid;
};
static bool no_bt_rfkill;
module_param(no_bt_rfkill, bool, 0444);
MODULE_PARM_DESC(no_bt_rfkill, "No rfkill for bluetooth.");
/*
* ACPI Helpers
*/
#define IDEAPAD_EC_TIMEOUT (100) /* in ms */
static int read_method_int(acpi_handle handle, const char *method, int *val)
{
acpi_status status;
unsigned long long result;
status = acpi_evaluate_integer(handle, (char *)method, NULL, &result);
if (ACPI_FAILURE(status)) {
*val = -1;
return -1;
} else {
*val = result;
return 0;
}
}
static int method_vpcr(acpi_handle handle, int cmd, int *ret)
{
acpi_status status;
unsigned long long result;
struct acpi_object_list params;
union acpi_object in_obj;
params.count = 1;
params.pointer = &in_obj;
in_obj.type = ACPI_TYPE_INTEGER;
in_obj.integer.value = cmd;
status = acpi_evaluate_integer(handle, "VPCR", &params, &result);
if (ACPI_FAILURE(status)) {
*ret = -1;
return -1;
} else {
*ret = result;
return 0;
}
}
static int method_vpcw(acpi_handle handle, int cmd, int data)
{
struct acpi_object_list params;
union acpi_object in_obj[2];
acpi_status status;
params.count = 2;
params.pointer = in_obj;
in_obj[0].type = ACPI_TYPE_INTEGER;
in_obj[0].integer.value = cmd;
in_obj[1].type = ACPI_TYPE_INTEGER;
in_obj[1].integer.value = data;
status = acpi_evaluate_object(handle, "VPCW", &params, NULL);
if (status != AE_OK)
return -1;
return 0;
}
static int read_ec_data(acpi_handle handle, int cmd, unsigned long *data)
{
int val;
unsigned long int end_jiffies;
if (method_vpcw(handle, 1, cmd))
return -1;
for (end_jiffies = jiffies+(HZ)*IDEAPAD_EC_TIMEOUT/1000+1;
time_before(jiffies, end_jiffies);) {
schedule();
if (method_vpcr(handle, 1, &val))
return -1;
if (val == 0) {
if (method_vpcr(handle, 0, &val))
return -1;
*data = val;
return 0;
}
}
pr_err("timeout in read_ec_cmd\n");
return -1;
}
static int write_ec_cmd(acpi_handle handle, int cmd, unsigned long data)
{
int val;
unsigned long int end_jiffies;
if (method_vpcw(handle, 0, data))
return -1;
if (method_vpcw(handle, 1, cmd))
return -1;
for (end_jiffies = jiffies+(HZ)*IDEAPAD_EC_TIMEOUT/1000+1;
time_before(jiffies, end_jiffies);) {
schedule();
if (method_vpcr(handle, 1, &val))
return -1;
if (val == 0)
return 0;
}
pr_err("timeout in write_ec_cmd\n");
return -1;
}
/*
* debugfs
*/
static int debugfs_status_show(struct seq_file *s, void *data)
{
struct ideapad_private *priv = s->private;
unsigned long value;
if (!priv)
return -EINVAL;
if (!read_ec_data(priv->adev->handle, VPCCMD_R_BL_MAX, &value))
seq_printf(s, "Backlight max:\t%lu\n", value);
if (!read_ec_data(priv->adev->handle, VPCCMD_R_BL, &value))
seq_printf(s, "Backlight now:\t%lu\n", value);
if (!read_ec_data(priv->adev->handle, VPCCMD_R_BL_POWER, &value))
seq_printf(s, "BL power value:\t%s\n", value ? "On" : "Off");
seq_printf(s, "=====================\n");
if (!read_ec_data(priv->adev->handle, VPCCMD_R_RF, &value))
seq_printf(s, "Radio status:\t%s(%lu)\n",
value ? "On" : "Off", value);
if (!read_ec_data(priv->adev->handle, VPCCMD_R_WIFI, &value))
seq_printf(s, "Wifi status:\t%s(%lu)\n",
value ? "On" : "Off", value);
if (!read_ec_data(priv->adev->handle, VPCCMD_R_BT, &value))
seq_printf(s, "BT status:\t%s(%lu)\n",
value ? "On" : "Off", value);
if (!read_ec_data(priv->adev->handle, VPCCMD_R_3G, &value))
seq_printf(s, "3G status:\t%s(%lu)\n",
value ? "On" : "Off", value);
seq_printf(s, "=====================\n");
if (!read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &value))
seq_printf(s, "Touchpad status:%s(%lu)\n",
value ? "On" : "Off", value);
if (!read_ec_data(priv->adev->handle, VPCCMD_R_CAMERA, &value))
seq_printf(s, "Camera status:\t%s(%lu)\n",
value ? "On" : "Off", value);
return 0;
}
static int debugfs_status_open(struct inode *inode, struct file *file)
{
return single_open(file, debugfs_status_show, inode->i_private);
}
static const struct file_operations debugfs_status_fops = {
.owner = THIS_MODULE,
.open = debugfs_status_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int debugfs_cfg_show(struct seq_file *s, void *data)
{
struct ideapad_private *priv = s->private;
if (!priv) {
seq_printf(s, "cfg: N/A\n");
} else {
seq_printf(s, "cfg: 0x%.8lX\n\nCapability: ",
priv->cfg);
if (test_bit(CFG_BT_BIT, &priv->cfg))
seq_printf(s, "Bluetooth ");
if (test_bit(CFG_3G_BIT, &priv->cfg))
seq_printf(s, "3G ");
if (test_bit(CFG_WIFI_BIT, &priv->cfg))
seq_printf(s, "Wireless ");
if (test_bit(CFG_CAMERA_BIT, &priv->cfg))
seq_printf(s, "Camera ");
seq_printf(s, "\nGraphic: ");
switch ((priv->cfg)&0x700) {
case 0x100:
seq_printf(s, "Intel");
break;
case 0x200:
seq_printf(s, "ATI");
break;
case 0x300:
seq_printf(s, "Nvidia");
break;
case 0x400:
seq_printf(s, "Intel and ATI");
break;
case 0x500:
seq_printf(s, "Intel and Nvidia");
break;
}
seq_printf(s, "\n");
}
return 0;
}
static int debugfs_cfg_open(struct inode *inode, struct file *file)
{
return single_open(file, debugfs_cfg_show, inode->i_private);
}
static const struct file_operations debugfs_cfg_fops = {
.owner = THIS_MODULE,
.open = debugfs_cfg_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int ideapad_debugfs_init(struct ideapad_private *priv)
{
struct dentry *node;
priv->debug = debugfs_create_dir("ideapad", NULL);
if (priv->debug == NULL) {
pr_err("failed to create debugfs directory");
goto errout;
}
node = debugfs_create_file("cfg", S_IRUGO, priv->debug, priv,
&debugfs_cfg_fops);
if (!node) {
pr_err("failed to create cfg in debugfs");
goto errout;
}
node = debugfs_create_file("status", S_IRUGO, priv->debug, priv,
&debugfs_status_fops);
if (!node) {
pr_err("failed to create status in debugfs");
goto errout;
}
return 0;
errout:
return -ENOMEM;
}
static void ideapad_debugfs_exit(struct ideapad_private *priv)
{
debugfs_remove_recursive(priv->debug);
priv->debug = NULL;
}
/*
* sysfs
*/
static ssize_t show_ideapad_cam(struct device *dev,
struct device_attribute *attr,
char *buf)
{
unsigned long result;
struct ideapad_private *priv = dev_get_drvdata(dev);
if (read_ec_data(priv->adev->handle, VPCCMD_R_CAMERA, &result))
return sprintf(buf, "-1\n");
return sprintf(buf, "%lu\n", result);
}
static ssize_t store_ideapad_cam(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret, state;
struct ideapad_private *priv = dev_get_drvdata(dev);
if (!count)
return 0;
if (sscanf(buf, "%i", &state) != 1)
return -EINVAL;
ret = write_ec_cmd(priv->adev->handle, VPCCMD_W_CAMERA, state);
if (ret < 0)
return -EIO;
return count;
}
static DEVICE_ATTR(camera_power, 0644, show_ideapad_cam, store_ideapad_cam);
static ssize_t show_ideapad_fan(struct device *dev,
struct device_attribute *attr,
char *buf)
{
unsigned long result;
struct ideapad_private *priv = dev_get_drvdata(dev);
if (read_ec_data(priv->adev->handle, VPCCMD_R_FAN, &result))
return sprintf(buf, "-1\n");
return sprintf(buf, "%lu\n", result);
}
static ssize_t store_ideapad_fan(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret, state;
struct ideapad_private *priv = dev_get_drvdata(dev);
if (!count)
return 0;
if (sscanf(buf, "%i", &state) != 1)
return -EINVAL;
if (state < 0 || state > 4 || state == 3)
return -EINVAL;
ret = write_ec_cmd(priv->adev->handle, VPCCMD_W_FAN, state);
if (ret < 0)
return -EIO;
return count;
}
static DEVICE_ATTR(fan_mode, 0644, show_ideapad_fan, store_ideapad_fan);
static ssize_t touchpad_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct ideapad_private *priv = dev_get_drvdata(dev);
unsigned long result;
if (read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &result))
return sprintf(buf, "-1\n");
return sprintf(buf, "%lu\n", result);
}
/* Switch to RO for now: It might be revisited in the future */
static ssize_t __maybe_unused touchpad_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct ideapad_private *priv = dev_get_drvdata(dev);
bool state;
int ret;
ret = kstrtobool(buf, &state);
if (ret)
return ret;
ret = write_ec_cmd(priv->adev->handle, VPCCMD_W_TOUCHPAD, state);
if (ret < 0)
return -EIO;
return count;
}
static DEVICE_ATTR_RO(touchpad);
static struct attribute *ideapad_attributes[] = {
&dev_attr_camera_power.attr,
&dev_attr_fan_mode.attr,
&dev_attr_touchpad.attr,
NULL
};
static umode_t ideapad_is_visible(struct kobject *kobj,
struct attribute *attr,
int idx)
{
struct device *dev = container_of(kobj, struct device, kobj);
struct ideapad_private *priv = dev_get_drvdata(dev);
bool supported;
if (attr == &dev_attr_camera_power.attr)
supported = test_bit(CFG_CAMERA_BIT, &(priv->cfg));
else if (attr == &dev_attr_fan_mode.attr) {
unsigned long value;
supported = !read_ec_data(priv->adev->handle, VPCCMD_R_FAN,
&value);
} else
supported = true;
return supported ? attr->mode : 0;
}
static const struct attribute_group ideapad_attribute_group = {
.is_visible = ideapad_is_visible,
.attrs = ideapad_attributes
};
/*
* Rfkill
*/
struct ideapad_rfk_data {
char *name;
int cfgbit;
int opcode;
int type;
};
static const struct ideapad_rfk_data ideapad_rfk_data[] = {
{ "ideapad_wlan", CFG_WIFI_BIT, VPCCMD_W_WIFI, RFKILL_TYPE_WLAN },
{ "ideapad_bluetooth", CFG_BT_BIT, VPCCMD_W_BT, RFKILL_TYPE_BLUETOOTH },
{ "ideapad_3g", CFG_3G_BIT, VPCCMD_W_3G, RFKILL_TYPE_WWAN },
};
static int ideapad_rfk_set(void *data, bool blocked)
{
struct ideapad_rfk_priv *priv = data;
int opcode = ideapad_rfk_data[priv->dev].opcode;
return write_ec_cmd(priv->priv->adev->handle, opcode, !blocked);
}
static const struct rfkill_ops ideapad_rfk_ops = {
.set_block = ideapad_rfk_set,
};
static void ideapad_sync_rfk_state(struct ideapad_private *priv)
{
ideapad-laptop: Change Lenovo Yoga 2 series rfkill handling It seems that the same problems which lead to adding an rfkill blacklist and putting the Lenovo Yoga 2 11 on it are also present on the Lenovo Yoga 2 13 and Lenovo Yoga 2 Pro too: https://bugzilla.redhat.com/show_bug.cgi?id=1021036 https://forums.lenovo.com/t5/Linux-Discussion/Yoga-2-13-not-Pro-Linux-Warning/m-p/1517612 Testing has shown that the firmware rfkill settings are persistent over reboots. So blacklisting the driver is not good enough, if the wifi is blocked at the firmware level the wifi needs to be explictly unblocked through the ideapad-laptop interface. And at least on the Lenovo Yoga 2 13 the VPCCMD_RF register which on devices with hardware kill switch reports the hardware switch state, needs to be explictly set to 1 (radio enabled / not blocked). So this patch does 3 things to get proper rfkill handling on these models: 1) Instead of blacklisting the rfkill functionality, which means that people with a firmware blocked wifi get stuck in that situation, ignore the value reported by the not present hardware rfkill switch, as this is what is causing ideapad-laptop to wrongly report all radios as hardware blocks. But do register the rfkill interfaces so that the user can soft [un]block them. 2) On models without a hardware rfkill switch, explictly set VPCCMD_RF to 1 3) Drop the " 11" postfix from the dmi match string, as the entire Yoga 2 series is affected. Yoga 2 11: Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com> Yoga 2 13: Tested-by: madls05 <http://ubuntuforums.org/showthread.php?t=2215044> Yoga 2 Pro: Reported-and-tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-23 08:45:51 -06:00
unsigned long hw_blocked = 0;
int i;
ideapad-laptop: Change Lenovo Yoga 2 series rfkill handling It seems that the same problems which lead to adding an rfkill blacklist and putting the Lenovo Yoga 2 11 on it are also present on the Lenovo Yoga 2 13 and Lenovo Yoga 2 Pro too: https://bugzilla.redhat.com/show_bug.cgi?id=1021036 https://forums.lenovo.com/t5/Linux-Discussion/Yoga-2-13-not-Pro-Linux-Warning/m-p/1517612 Testing has shown that the firmware rfkill settings are persistent over reboots. So blacklisting the driver is not good enough, if the wifi is blocked at the firmware level the wifi needs to be explictly unblocked through the ideapad-laptop interface. And at least on the Lenovo Yoga 2 13 the VPCCMD_RF register which on devices with hardware kill switch reports the hardware switch state, needs to be explictly set to 1 (radio enabled / not blocked). So this patch does 3 things to get proper rfkill handling on these models: 1) Instead of blacklisting the rfkill functionality, which means that people with a firmware blocked wifi get stuck in that situation, ignore the value reported by the not present hardware rfkill switch, as this is what is causing ideapad-laptop to wrongly report all radios as hardware blocks. But do register the rfkill interfaces so that the user can soft [un]block them. 2) On models without a hardware rfkill switch, explictly set VPCCMD_RF to 1 3) Drop the " 11" postfix from the dmi match string, as the entire Yoga 2 series is affected. Yoga 2 11: Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com> Yoga 2 13: Tested-by: madls05 <http://ubuntuforums.org/showthread.php?t=2215044> Yoga 2 Pro: Reported-and-tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-23 08:45:51 -06:00
if (priv->has_hw_rfkill_switch) {
if (read_ec_data(priv->adev->handle, VPCCMD_R_RF, &hw_blocked))
return;
hw_blocked = !hw_blocked;
}
for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
if (priv->rfk[i])
rfkill_set_hw_state(priv->rfk[i], hw_blocked);
}
static int ideapad_register_rfkill(struct ideapad_private *priv, int dev)
{
int ret;
unsigned long sw_blocked;
if (no_bt_rfkill &&
(ideapad_rfk_data[dev].type == RFKILL_TYPE_BLUETOOTH)) {
/* Force to enable bluetooth when no_bt_rfkill=1 */
write_ec_cmd(priv->adev->handle,
ideapad_rfk_data[dev].opcode, 1);
return 0;
}
priv->rfk_priv[dev].dev = dev;
priv->rfk_priv[dev].priv = priv;
priv->rfk[dev] = rfkill_alloc(ideapad_rfk_data[dev].name,
&priv->platform_device->dev,
ideapad_rfk_data[dev].type,
&ideapad_rfk_ops,
&priv->rfk_priv[dev]);
if (!priv->rfk[dev])
return -ENOMEM;
if (read_ec_data(priv->adev->handle, ideapad_rfk_data[dev].opcode-1,
&sw_blocked)) {
rfkill_init_sw_state(priv->rfk[dev], 0);
} else {
sw_blocked = !sw_blocked;
rfkill_init_sw_state(priv->rfk[dev], sw_blocked);
}
ret = rfkill_register(priv->rfk[dev]);
if (ret) {
rfkill_destroy(priv->rfk[dev]);
return ret;
}
return 0;
}
static void ideapad_unregister_rfkill(struct ideapad_private *priv, int dev)
{
if (!priv->rfk[dev])
return;
rfkill_unregister(priv->rfk[dev]);
rfkill_destroy(priv->rfk[dev]);
}
/*
* Platform device
*/
static int ideapad_sysfs_init(struct ideapad_private *priv)
{
return sysfs_create_group(&priv->platform_device->dev.kobj,
&ideapad_attribute_group);
}
static void ideapad_sysfs_exit(struct ideapad_private *priv)
{
sysfs_remove_group(&priv->platform_device->dev.kobj,
&ideapad_attribute_group);
}
/*
* input device
*/
static const struct key_entry ideapad_keymap[] = {
{ KE_KEY, 6, { KEY_SWITCHVIDEOMODE } },
{ KE_KEY, 7, { KEY_CAMERA } },
{ KE_KEY, 8, { KEY_MICMUTE } },
{ KE_KEY, 11, { KEY_F16 } },
{ KE_KEY, 13, { KEY_WLAN } },
{ KE_KEY, 16, { KEY_PROG1 } },
{ KE_KEY, 17, { KEY_PROG2 } },
{ KE_KEY, 64, { KEY_PROG3 } },
{ KE_KEY, 65, { KEY_PROG4 } },
{ KE_KEY, 66, { KEY_TOUCHPAD_OFF } },
{ KE_KEY, 67, { KEY_TOUCHPAD_ON } },
ideapad-laptop: add support for Yoga 3 ESC key The ideapad-laptop handles most special keys on various Lenovo Laptops including the Yoga line. Unfortunately, the Yoga 3 11/13/14 models have one important exception, which is the Fn-ESC combination. On other Lenovo Laptops, this is FnLock, which switches the function keys between the primary (Mute, Vol down, Vol up, ...) and the secondary (F1, F2, F3, ...) behavior. On the new machines, FnLock is only available through BIOS setup (possibly through a yet-to-be-implemented feature in this driver) but not through Fn-ESC, but instead the ESC key itself switched between ESC and a "Paper Display" app for Windows. Unfortunately, that means that you can never have both ESC *and* the function keys working at the same time without needing to press Fn on one of them. As pointed out in the official Lenovo Forum by dozens of users, this makes the machine rather useless for any serious work [1]. I have now studied the ACPI DSDT one more time and found the event that is generated for the ESC key. Unlike all other key events on this machine, it is actually a WMI, while the other ones are read from the embedded controller. I am now installing a WMI notifier that uses the event number from the WMI subsystem as the scancode. The only event number generated here is '128', and that fits in nicely with the two existing ranges of scancodes used by the EC: 0-15 for the 16-bit VPCCMD_R_VPC register, 16-17 for the VPCCMD_R_NOVO register and 64-67 for VPCCMD_R_SPECIAL_BUTTONS. The only sane way to handle this button (in absence of the Windows Paper Display driver) seems to be to have it emit KEY_ESC, so that is what I use as the default. Should any user ever want to overwrite the default, they can install their own keymap. To ensure that we can still build the driver without adding a CONFIG_WMI dependency, all new code is enclosed in #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [1] https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/YOGA-3-14-How-to-reclaim-my-Esc-key-and-permanently-disable/td-p/2070816 Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-11-06 14:28:49 -07:00
{ KE_KEY, 128, { KEY_ESC } },
{ KE_END, 0 },
};
static int ideapad_input_init(struct ideapad_private *priv)
{
struct input_dev *inputdev;
int error;
inputdev = input_allocate_device();
if (!inputdev)
return -ENOMEM;
inputdev->name = "Ideapad extra buttons";
inputdev->phys = "ideapad/input0";
inputdev->id.bustype = BUS_HOST;
inputdev->dev.parent = &priv->platform_device->dev;
error = sparse_keymap_setup(inputdev, ideapad_keymap, NULL);
if (error) {
pr_err("Unable to setup input device keymap\n");
goto err_free_dev;
}
error = input_register_device(inputdev);
if (error) {
pr_err("Unable to register input device\n");
goto err_free_dev;
}
priv->inputdev = inputdev;
return 0;
err_free_dev:
input_free_device(inputdev);
return error;
}
static void ideapad_input_exit(struct ideapad_private *priv)
{
input_unregister_device(priv->inputdev);
priv->inputdev = NULL;
}
static void ideapad_input_report(struct ideapad_private *priv,
unsigned long scancode)
{
sparse_keymap_report_event(priv->inputdev, scancode, 1, true);
}
static void ideapad_input_novokey(struct ideapad_private *priv)
{
unsigned long long_pressed;
if (read_ec_data(priv->adev->handle, VPCCMD_R_NOVO, &long_pressed))
return;
if (long_pressed)
ideapad_input_report(priv, 17);
else
ideapad_input_report(priv, 16);
}
static void ideapad_check_special_buttons(struct ideapad_private *priv)
{
unsigned long bit, value;
read_ec_data(priv->adev->handle, VPCCMD_R_SPECIAL_BUTTONS, &value);
for (bit = 0; bit < 16; bit++) {
if (test_bit(bit, &value)) {
switch (bit) {
case 0: /* Z580 */
case 6: /* Z570 */
/* Thermal Management button */
ideapad_input_report(priv, 65);
break;
case 1:
/* OneKey Theater button */
ideapad_input_report(priv, 64);
break;
default:
pr_info("Unknown special button: %lu\n", bit);
break;
}
}
}
}
/*
* backlight
*/
static int ideapad_backlight_get_brightness(struct backlight_device *blightdev)
{
struct ideapad_private *priv = bl_get_data(blightdev);
unsigned long now;
if (!priv)
return -EINVAL;
if (read_ec_data(priv->adev->handle, VPCCMD_R_BL, &now))
return -EIO;
return now;
}
static int ideapad_backlight_update_status(struct backlight_device *blightdev)
{
struct ideapad_private *priv = bl_get_data(blightdev);
if (!priv)
return -EINVAL;
if (write_ec_cmd(priv->adev->handle, VPCCMD_W_BL,
blightdev->props.brightness))
return -EIO;
if (write_ec_cmd(priv->adev->handle, VPCCMD_W_BL_POWER,
blightdev->props.power == FB_BLANK_POWERDOWN ? 0 : 1))
return -EIO;
return 0;
}
static const struct backlight_ops ideapad_backlight_ops = {
.get_brightness = ideapad_backlight_get_brightness,
.update_status = ideapad_backlight_update_status,
};
static int ideapad_backlight_init(struct ideapad_private *priv)
{
struct backlight_device *blightdev;
struct backlight_properties props;
unsigned long max, now, power;
if (read_ec_data(priv->adev->handle, VPCCMD_R_BL_MAX, &max))
return -EIO;
if (read_ec_data(priv->adev->handle, VPCCMD_R_BL, &now))
return -EIO;
if (read_ec_data(priv->adev->handle, VPCCMD_R_BL_POWER, &power))
return -EIO;
memset(&props, 0, sizeof(struct backlight_properties));
props.max_brightness = max;
props.type = BACKLIGHT_PLATFORM;
blightdev = backlight_device_register("ideapad",
&priv->platform_device->dev,
priv,
&ideapad_backlight_ops,
&props);
if (IS_ERR(blightdev)) {
pr_err("Could not register backlight device\n");
return PTR_ERR(blightdev);
}
priv->blightdev = blightdev;
blightdev->props.brightness = now;
blightdev->props.power = power ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
backlight_update_status(blightdev);
return 0;
}
static void ideapad_backlight_exit(struct ideapad_private *priv)
{
backlight_device_unregister(priv->blightdev);
priv->blightdev = NULL;
}
static void ideapad_backlight_notify_power(struct ideapad_private *priv)
{
unsigned long power;
struct backlight_device *blightdev = priv->blightdev;
if (!blightdev)
return;
if (read_ec_data(priv->adev->handle, VPCCMD_R_BL_POWER, &power))
return;
blightdev->props.power = power ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
}
static void ideapad_backlight_notify_brightness(struct ideapad_private *priv)
{
unsigned long now;
/* if we control brightness via acpi video driver */
if (priv->blightdev == NULL) {
read_ec_data(priv->adev->handle, VPCCMD_R_BL, &now);
return;
}
backlight_force_update(priv->blightdev, BACKLIGHT_UPDATE_HOTKEY);
}
/*
* module init/exit
*/
static void ideapad_sync_touchpad_state(struct ideapad_private *priv)
{
unsigned long value;
/* Without reading from EC touchpad LED doesn't switch state */
if (!read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &value)) {
/* Some IdeaPads don't really turn off touchpad - they only
* switch the LED state. We (de)activate KBC AUX port to turn
* touchpad off and on. We send KEY_TOUCHPAD_OFF and
* KEY_TOUCHPAD_ON to not to get out of sync with LED */
unsigned char param;
i8042_command(&param, value ? I8042_CMD_AUX_ENABLE :
I8042_CMD_AUX_DISABLE);
ideapad_input_report(priv, value ? 67 : 66);
}
}
static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data)
{
struct ideapad_private *priv = data;
unsigned long vpc1, vpc2, vpc_bit;
if (read_ec_data(handle, VPCCMD_R_VPC1, &vpc1))
return;
if (read_ec_data(handle, VPCCMD_R_VPC2, &vpc2))
return;
vpc1 = (vpc2 << 8) | vpc1;
for (vpc_bit = 0; vpc_bit < 16; vpc_bit++) {
if (test_bit(vpc_bit, &vpc1)) {
switch (vpc_bit) {
case 9:
ideapad_sync_rfk_state(priv);
break;
case 13:
case 11:
case 8:
case 7:
case 6:
ideapad_input_report(priv, vpc_bit);
break;
case 5:
ideapad_sync_touchpad_state(priv);
break;
case 4:
ideapad_backlight_notify_brightness(priv);
break;
case 3:
ideapad_input_novokey(priv);
break;
case 2:
ideapad_backlight_notify_power(priv);
break;
case 0:
ideapad_check_special_buttons(priv);
break;
case 1:
/* Some IdeaPads report event 1 every ~20
* seconds while on battery power; some
* report this when changing to/from tablet
* mode. Squelch this event.
*/
break;
default:
pr_info("Unknown event: %lu\n", vpc_bit);
}
}
}
}
ideapad-laptop: add support for Yoga 3 ESC key The ideapad-laptop handles most special keys on various Lenovo Laptops including the Yoga line. Unfortunately, the Yoga 3 11/13/14 models have one important exception, which is the Fn-ESC combination. On other Lenovo Laptops, this is FnLock, which switches the function keys between the primary (Mute, Vol down, Vol up, ...) and the secondary (F1, F2, F3, ...) behavior. On the new machines, FnLock is only available through BIOS setup (possibly through a yet-to-be-implemented feature in this driver) but not through Fn-ESC, but instead the ESC key itself switched between ESC and a "Paper Display" app for Windows. Unfortunately, that means that you can never have both ESC *and* the function keys working at the same time without needing to press Fn on one of them. As pointed out in the official Lenovo Forum by dozens of users, this makes the machine rather useless for any serious work [1]. I have now studied the ACPI DSDT one more time and found the event that is generated for the ESC key. Unlike all other key events on this machine, it is actually a WMI, while the other ones are read from the embedded controller. I am now installing a WMI notifier that uses the event number from the WMI subsystem as the scancode. The only event number generated here is '128', and that fits in nicely with the two existing ranges of scancodes used by the EC: 0-15 for the 16-bit VPCCMD_R_VPC register, 16-17 for the VPCCMD_R_NOVO register and 64-67 for VPCCMD_R_SPECIAL_BUTTONS. The only sane way to handle this button (in absence of the Windows Paper Display driver) seems to be to have it emit KEY_ESC, so that is what I use as the default. Should any user ever want to overwrite the default, they can install their own keymap. To ensure that we can still build the driver without adding a CONFIG_WMI dependency, all new code is enclosed in #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [1] https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/YOGA-3-14-How-to-reclaim-my-Esc-key-and-permanently-disable/td-p/2070816 Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-11-06 14:28:49 -07:00
#if IS_ENABLED(CONFIG_ACPI_WMI)
static void ideapad_wmi_notify(u32 value, void *context)
{
switch (value) {
case 128:
ideapad_input_report(context, value);
break;
default:
pr_info("Unknown WMI event %u\n", value);
}
}
#endif
ideapad-laptop: Change Lenovo Yoga 2 series rfkill handling It seems that the same problems which lead to adding an rfkill blacklist and putting the Lenovo Yoga 2 11 on it are also present on the Lenovo Yoga 2 13 and Lenovo Yoga 2 Pro too: https://bugzilla.redhat.com/show_bug.cgi?id=1021036 https://forums.lenovo.com/t5/Linux-Discussion/Yoga-2-13-not-Pro-Linux-Warning/m-p/1517612 Testing has shown that the firmware rfkill settings are persistent over reboots. So blacklisting the driver is not good enough, if the wifi is blocked at the firmware level the wifi needs to be explictly unblocked through the ideapad-laptop interface. And at least on the Lenovo Yoga 2 13 the VPCCMD_RF register which on devices with hardware kill switch reports the hardware switch state, needs to be explictly set to 1 (radio enabled / not blocked). So this patch does 3 things to get proper rfkill handling on these models: 1) Instead of blacklisting the rfkill functionality, which means that people with a firmware blocked wifi get stuck in that situation, ignore the value reported by the not present hardware rfkill switch, as this is what is causing ideapad-laptop to wrongly report all radios as hardware blocks. But do register the rfkill interfaces so that the user can soft [un]block them. 2) On models without a hardware rfkill switch, explictly set VPCCMD_RF to 1 3) Drop the " 11" postfix from the dmi match string, as the entire Yoga 2 series is affected. Yoga 2 11: Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com> Yoga 2 13: Tested-by: madls05 <http://ubuntuforums.org/showthread.php?t=2215044> Yoga 2 Pro: Reported-and-tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-23 08:45:51 -06:00
/*
* Some ideapads don't have a hardware rfkill switch, reading VPCCMD_R_RF
* always results in 0 on these models, causing ideapad_laptop to wrongly
* report all radios as hardware-blocked.
*/
static const struct dmi_system_id no_hw_rfkill_list[] = {
{
.ident = "Lenovo G40-30",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo G40-30"),
},
},
{
.ident = "Lenovo G50-30",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo G50-30"),
},
},
{
.ident = "Lenovo V310-14IKB",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V310-14IKB"),
},
},
{
.ident = "Lenovo V310-14ISK",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V310-14ISK"),
},
},
{
.ident = "Lenovo V310-15IKB",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V310-15IKB"),
},
},
{
.ident = "Lenovo V310-15ISK",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V310-15ISK"),
},
},
{
.ident = "Lenovo V510-15IKB",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V510-15IKB"),
},
},
{
.ident = "Lenovo ideapad 300-15IBR",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 300-15IBR"),
},
},
{
.ident = "Lenovo ideapad 300-15IKB",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 300-15IKB"),
},
},
{
.ident = "Lenovo ideapad 300S-11IBR",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 300S-11BR"),
},
},
{
.ident = "Lenovo ideapad 310-15ABR",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 310-15ABR"),
},
},
{
.ident = "Lenovo ideapad 310-15IAP",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 310-15IAP"),
},
},
{
.ident = "Lenovo ideapad 310-15IKB",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 310-15IKB"),
},
},
{
.ident = "Lenovo ideapad 310-15ISK",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 310-15ISK"),
},
},
{
.ident = "Lenovo ideapad Y700-14ISK",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad Y700-14ISK"),
},
},
{
.ident = "Lenovo ideapad Y700-15ACZ",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad Y700-15ACZ"),
},
},
{
.ident = "Lenovo ideapad Y700-15ISK",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad Y700-15ISK"),
},
},
{
.ident = "Lenovo ideapad Y700 Touch-15ISK",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad Y700 Touch-15ISK"),
},
},
{
.ident = "Lenovo ideapad Y700-17ISK",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad Y700-17ISK"),
},
},
{
.ident = "Lenovo Legion Y520-15IKBN",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Y520-15IKBN"),
},
},
{
.ident = "Lenovo Legion Y720-15IKBN",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Y720-15IKBN"),
},
},
{
ideapad-laptop: Change Lenovo Yoga 2 series rfkill handling It seems that the same problems which lead to adding an rfkill blacklist and putting the Lenovo Yoga 2 11 on it are also present on the Lenovo Yoga 2 13 and Lenovo Yoga 2 Pro too: https://bugzilla.redhat.com/show_bug.cgi?id=1021036 https://forums.lenovo.com/t5/Linux-Discussion/Yoga-2-13-not-Pro-Linux-Warning/m-p/1517612 Testing has shown that the firmware rfkill settings are persistent over reboots. So blacklisting the driver is not good enough, if the wifi is blocked at the firmware level the wifi needs to be explictly unblocked through the ideapad-laptop interface. And at least on the Lenovo Yoga 2 13 the VPCCMD_RF register which on devices with hardware kill switch reports the hardware switch state, needs to be explictly set to 1 (radio enabled / not blocked). So this patch does 3 things to get proper rfkill handling on these models: 1) Instead of blacklisting the rfkill functionality, which means that people with a firmware blocked wifi get stuck in that situation, ignore the value reported by the not present hardware rfkill switch, as this is what is causing ideapad-laptop to wrongly report all radios as hardware blocks. But do register the rfkill interfaces so that the user can soft [un]block them. 2) On models without a hardware rfkill switch, explictly set VPCCMD_RF to 1 3) Drop the " 11" postfix from the dmi match string, as the entire Yoga 2 series is affected. Yoga 2 11: Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com> Yoga 2 13: Tested-by: madls05 <http://ubuntuforums.org/showthread.php?t=2215044> Yoga 2 Pro: Reported-and-tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-23 08:45:51 -06:00
.ident = "Lenovo Yoga 2 11 / 13 / Pro",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
ideapad-laptop: Change Lenovo Yoga 2 series rfkill handling It seems that the same problems which lead to adding an rfkill blacklist and putting the Lenovo Yoga 2 11 on it are also present on the Lenovo Yoga 2 13 and Lenovo Yoga 2 Pro too: https://bugzilla.redhat.com/show_bug.cgi?id=1021036 https://forums.lenovo.com/t5/Linux-Discussion/Yoga-2-13-not-Pro-Linux-Warning/m-p/1517612 Testing has shown that the firmware rfkill settings are persistent over reboots. So blacklisting the driver is not good enough, if the wifi is blocked at the firmware level the wifi needs to be explictly unblocked through the ideapad-laptop interface. And at least on the Lenovo Yoga 2 13 the VPCCMD_RF register which on devices with hardware kill switch reports the hardware switch state, needs to be explictly set to 1 (radio enabled / not blocked). So this patch does 3 things to get proper rfkill handling on these models: 1) Instead of blacklisting the rfkill functionality, which means that people with a firmware blocked wifi get stuck in that situation, ignore the value reported by the not present hardware rfkill switch, as this is what is causing ideapad-laptop to wrongly report all radios as hardware blocks. But do register the rfkill interfaces so that the user can soft [un]block them. 2) On models without a hardware rfkill switch, explictly set VPCCMD_RF to 1 3) Drop the " 11" postfix from the dmi match string, as the entire Yoga 2 series is affected. Yoga 2 11: Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com> Yoga 2 13: Tested-by: madls05 <http://ubuntuforums.org/showthread.php?t=2215044> Yoga 2 Pro: Reported-and-tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-23 08:45:51 -06:00
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 2"),
},
},
{
.ident = "Lenovo Yoga 2 11 / 13 / Pro",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_BOARD_NAME, "Yoga2"),
},
},
{
.ident = "Lenovo Yoga 3 1170 / 1470",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 3"),
},
},
{
.ident = "Lenovo Yoga 3 Pro 1370",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 3"),
},
},
{
.ident = "Lenovo Yoga 700",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 700"),
},
},
{
.ident = "Lenovo Yoga 900",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 900"),
},
},
{
.ident = "Lenovo Yoga 900",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_BOARD_NAME, "VIUU4"),
},
},
{
.ident = "Lenovo YOGA 910-13IKB",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 910-13IKB"),
},
},
{}
};
static int ideapad_acpi_add(struct platform_device *pdev)
{
int ret, i;
int cfg;
struct ideapad_private *priv;
struct acpi_device *adev;
ret = acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev);
if (ret)
return -ENODEV;
if (read_method_int(adev->handle, "_CFG", &cfg))
return -ENODEV;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
dev_set_drvdata(&pdev->dev, priv);
priv->cfg = cfg;
priv->adev = adev;
priv->platform_device = pdev;
ideapad-laptop: Change Lenovo Yoga 2 series rfkill handling It seems that the same problems which lead to adding an rfkill blacklist and putting the Lenovo Yoga 2 11 on it are also present on the Lenovo Yoga 2 13 and Lenovo Yoga 2 Pro too: https://bugzilla.redhat.com/show_bug.cgi?id=1021036 https://forums.lenovo.com/t5/Linux-Discussion/Yoga-2-13-not-Pro-Linux-Warning/m-p/1517612 Testing has shown that the firmware rfkill settings are persistent over reboots. So blacklisting the driver is not good enough, if the wifi is blocked at the firmware level the wifi needs to be explictly unblocked through the ideapad-laptop interface. And at least on the Lenovo Yoga 2 13 the VPCCMD_RF register which on devices with hardware kill switch reports the hardware switch state, needs to be explictly set to 1 (radio enabled / not blocked). So this patch does 3 things to get proper rfkill handling on these models: 1) Instead of blacklisting the rfkill functionality, which means that people with a firmware blocked wifi get stuck in that situation, ignore the value reported by the not present hardware rfkill switch, as this is what is causing ideapad-laptop to wrongly report all radios as hardware blocks. But do register the rfkill interfaces so that the user can soft [un]block them. 2) On models without a hardware rfkill switch, explictly set VPCCMD_RF to 1 3) Drop the " 11" postfix from the dmi match string, as the entire Yoga 2 series is affected. Yoga 2 11: Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com> Yoga 2 13: Tested-by: madls05 <http://ubuntuforums.org/showthread.php?t=2215044> Yoga 2 Pro: Reported-and-tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-23 08:45:51 -06:00
priv->has_hw_rfkill_switch = !dmi_check_system(no_hw_rfkill_list);
ret = ideapad_sysfs_init(priv);
if (ret)
return ret;
ret = ideapad_debugfs_init(priv);
if (ret)
goto debugfs_failed;
ret = ideapad_input_init(priv);
if (ret)
goto input_failed;
ideapad-laptop: Change Lenovo Yoga 2 series rfkill handling It seems that the same problems which lead to adding an rfkill blacklist and putting the Lenovo Yoga 2 11 on it are also present on the Lenovo Yoga 2 13 and Lenovo Yoga 2 Pro too: https://bugzilla.redhat.com/show_bug.cgi?id=1021036 https://forums.lenovo.com/t5/Linux-Discussion/Yoga-2-13-not-Pro-Linux-Warning/m-p/1517612 Testing has shown that the firmware rfkill settings are persistent over reboots. So blacklisting the driver is not good enough, if the wifi is blocked at the firmware level the wifi needs to be explictly unblocked through the ideapad-laptop interface. And at least on the Lenovo Yoga 2 13 the VPCCMD_RF register which on devices with hardware kill switch reports the hardware switch state, needs to be explictly set to 1 (radio enabled / not blocked). So this patch does 3 things to get proper rfkill handling on these models: 1) Instead of blacklisting the rfkill functionality, which means that people with a firmware blocked wifi get stuck in that situation, ignore the value reported by the not present hardware rfkill switch, as this is what is causing ideapad-laptop to wrongly report all radios as hardware blocks. But do register the rfkill interfaces so that the user can soft [un]block them. 2) On models without a hardware rfkill switch, explictly set VPCCMD_RF to 1 3) Drop the " 11" postfix from the dmi match string, as the entire Yoga 2 series is affected. Yoga 2 11: Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com> Yoga 2 13: Tested-by: madls05 <http://ubuntuforums.org/showthread.php?t=2215044> Yoga 2 Pro: Reported-and-tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-06-23 08:45:51 -06:00
/*
* On some models without a hw-switch (the yoga 2 13 at least)
* VPCCMD_W_RF must be explicitly set to 1 for the wifi to work.
*/
if (!priv->has_hw_rfkill_switch)
write_ec_cmd(priv->adev->handle, VPCCMD_W_RF, 1);
for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
if (test_bit(ideapad_rfk_data[i].cfgbit, &priv->cfg))
ideapad_register_rfkill(priv, i);
ideapad_sync_rfk_state(priv);
ideapad_sync_touchpad_state(priv);
if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
ret = ideapad_backlight_init(priv);
if (ret && ret != -ENODEV)
goto backlight_failed;
}
ret = acpi_install_notify_handler(adev->handle,
ACPI_DEVICE_NOTIFY, ideapad_acpi_notify, priv);
if (ret)
goto notification_failed;
ideapad-laptop: add support for Yoga 3 ESC key The ideapad-laptop handles most special keys on various Lenovo Laptops including the Yoga line. Unfortunately, the Yoga 3 11/13/14 models have one important exception, which is the Fn-ESC combination. On other Lenovo Laptops, this is FnLock, which switches the function keys between the primary (Mute, Vol down, Vol up, ...) and the secondary (F1, F2, F3, ...) behavior. On the new machines, FnLock is only available through BIOS setup (possibly through a yet-to-be-implemented feature in this driver) but not through Fn-ESC, but instead the ESC key itself switched between ESC and a "Paper Display" app for Windows. Unfortunately, that means that you can never have both ESC *and* the function keys working at the same time without needing to press Fn on one of them. As pointed out in the official Lenovo Forum by dozens of users, this makes the machine rather useless for any serious work [1]. I have now studied the ACPI DSDT one more time and found the event that is generated for the ESC key. Unlike all other key events on this machine, it is actually a WMI, while the other ones are read from the embedded controller. I am now installing a WMI notifier that uses the event number from the WMI subsystem as the scancode. The only event number generated here is '128', and that fits in nicely with the two existing ranges of scancodes used by the EC: 0-15 for the 16-bit VPCCMD_R_VPC register, 16-17 for the VPCCMD_R_NOVO register and 64-67 for VPCCMD_R_SPECIAL_BUTTONS. The only sane way to handle this button (in absence of the Windows Paper Display driver) seems to be to have it emit KEY_ESC, so that is what I use as the default. Should any user ever want to overwrite the default, they can install their own keymap. To ensure that we can still build the driver without adding a CONFIG_WMI dependency, all new code is enclosed in #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [1] https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/YOGA-3-14-How-to-reclaim-my-Esc-key-and-permanently-disable/td-p/2070816 Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-11-06 14:28:49 -07:00
#if IS_ENABLED(CONFIG_ACPI_WMI)
for (i = 0; i < ARRAY_SIZE(ideapad_wmi_fnesc_events); i++) {
ret = wmi_install_notify_handler(ideapad_wmi_fnesc_events[i],
ideapad_wmi_notify, priv);
if (ret == AE_OK) {
priv->fnesc_guid = ideapad_wmi_fnesc_events[i];
break;
}
}
ideapad-laptop: add support for Yoga 3 ESC key The ideapad-laptop handles most special keys on various Lenovo Laptops including the Yoga line. Unfortunately, the Yoga 3 11/13/14 models have one important exception, which is the Fn-ESC combination. On other Lenovo Laptops, this is FnLock, which switches the function keys between the primary (Mute, Vol down, Vol up, ...) and the secondary (F1, F2, F3, ...) behavior. On the new machines, FnLock is only available through BIOS setup (possibly through a yet-to-be-implemented feature in this driver) but not through Fn-ESC, but instead the ESC key itself switched between ESC and a "Paper Display" app for Windows. Unfortunately, that means that you can never have both ESC *and* the function keys working at the same time without needing to press Fn on one of them. As pointed out in the official Lenovo Forum by dozens of users, this makes the machine rather useless for any serious work [1]. I have now studied the ACPI DSDT one more time and found the event that is generated for the ESC key. Unlike all other key events on this machine, it is actually a WMI, while the other ones are read from the embedded controller. I am now installing a WMI notifier that uses the event number from the WMI subsystem as the scancode. The only event number generated here is '128', and that fits in nicely with the two existing ranges of scancodes used by the EC: 0-15 for the 16-bit VPCCMD_R_VPC register, 16-17 for the VPCCMD_R_NOVO register and 64-67 for VPCCMD_R_SPECIAL_BUTTONS. The only sane way to handle this button (in absence of the Windows Paper Display driver) seems to be to have it emit KEY_ESC, so that is what I use as the default. Should any user ever want to overwrite the default, they can install their own keymap. To ensure that we can still build the driver without adding a CONFIG_WMI dependency, all new code is enclosed in #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [1] https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/YOGA-3-14-How-to-reclaim-my-Esc-key-and-permanently-disable/td-p/2070816 Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-11-06 14:28:49 -07:00
if (ret != AE_OK && ret != AE_NOT_EXIST)
goto notification_failed_wmi;
#endif
return 0;
ideapad-laptop: add support for Yoga 3 ESC key The ideapad-laptop handles most special keys on various Lenovo Laptops including the Yoga line. Unfortunately, the Yoga 3 11/13/14 models have one important exception, which is the Fn-ESC combination. On other Lenovo Laptops, this is FnLock, which switches the function keys between the primary (Mute, Vol down, Vol up, ...) and the secondary (F1, F2, F3, ...) behavior. On the new machines, FnLock is only available through BIOS setup (possibly through a yet-to-be-implemented feature in this driver) but not through Fn-ESC, but instead the ESC key itself switched between ESC and a "Paper Display" app for Windows. Unfortunately, that means that you can never have both ESC *and* the function keys working at the same time without needing to press Fn on one of them. As pointed out in the official Lenovo Forum by dozens of users, this makes the machine rather useless for any serious work [1]. I have now studied the ACPI DSDT one more time and found the event that is generated for the ESC key. Unlike all other key events on this machine, it is actually a WMI, while the other ones are read from the embedded controller. I am now installing a WMI notifier that uses the event number from the WMI subsystem as the scancode. The only event number generated here is '128', and that fits in nicely with the two existing ranges of scancodes used by the EC: 0-15 for the 16-bit VPCCMD_R_VPC register, 16-17 for the VPCCMD_R_NOVO register and 64-67 for VPCCMD_R_SPECIAL_BUTTONS. The only sane way to handle this button (in absence of the Windows Paper Display driver) seems to be to have it emit KEY_ESC, so that is what I use as the default. Should any user ever want to overwrite the default, they can install their own keymap. To ensure that we can still build the driver without adding a CONFIG_WMI dependency, all new code is enclosed in #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [1] https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/YOGA-3-14-How-to-reclaim-my-Esc-key-and-permanently-disable/td-p/2070816 Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-11-06 14:28:49 -07:00
#if IS_ENABLED(CONFIG_ACPI_WMI)
notification_failed_wmi:
acpi_remove_notify_handler(priv->adev->handle,
ACPI_DEVICE_NOTIFY, ideapad_acpi_notify);
#endif
notification_failed:
ideapad_backlight_exit(priv);
backlight_failed:
for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
ideapad_unregister_rfkill(priv, i);
ideapad_input_exit(priv);
input_failed:
ideapad_debugfs_exit(priv);
debugfs_failed:
ideapad_sysfs_exit(priv);
return ret;
}
static int ideapad_acpi_remove(struct platform_device *pdev)
{
struct ideapad_private *priv = dev_get_drvdata(&pdev->dev);
int i;
ideapad-laptop: add support for Yoga 3 ESC key The ideapad-laptop handles most special keys on various Lenovo Laptops including the Yoga line. Unfortunately, the Yoga 3 11/13/14 models have one important exception, which is the Fn-ESC combination. On other Lenovo Laptops, this is FnLock, which switches the function keys between the primary (Mute, Vol down, Vol up, ...) and the secondary (F1, F2, F3, ...) behavior. On the new machines, FnLock is only available through BIOS setup (possibly through a yet-to-be-implemented feature in this driver) but not through Fn-ESC, but instead the ESC key itself switched between ESC and a "Paper Display" app for Windows. Unfortunately, that means that you can never have both ESC *and* the function keys working at the same time without needing to press Fn on one of them. As pointed out in the official Lenovo Forum by dozens of users, this makes the machine rather useless for any serious work [1]. I have now studied the ACPI DSDT one more time and found the event that is generated for the ESC key. Unlike all other key events on this machine, it is actually a WMI, while the other ones are read from the embedded controller. I am now installing a WMI notifier that uses the event number from the WMI subsystem as the scancode. The only event number generated here is '128', and that fits in nicely with the two existing ranges of scancodes used by the EC: 0-15 for the 16-bit VPCCMD_R_VPC register, 16-17 for the VPCCMD_R_NOVO register and 64-67 for VPCCMD_R_SPECIAL_BUTTONS. The only sane way to handle this button (in absence of the Windows Paper Display driver) seems to be to have it emit KEY_ESC, so that is what I use as the default. Should any user ever want to overwrite the default, they can install their own keymap. To ensure that we can still build the driver without adding a CONFIG_WMI dependency, all new code is enclosed in #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [1] https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/YOGA-3-14-How-to-reclaim-my-Esc-key-and-permanently-disable/td-p/2070816 Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-11-06 14:28:49 -07:00
#if IS_ENABLED(CONFIG_ACPI_WMI)
if (priv->fnesc_guid)
wmi_remove_notify_handler(priv->fnesc_guid);
ideapad-laptop: add support for Yoga 3 ESC key The ideapad-laptop handles most special keys on various Lenovo Laptops including the Yoga line. Unfortunately, the Yoga 3 11/13/14 models have one important exception, which is the Fn-ESC combination. On other Lenovo Laptops, this is FnLock, which switches the function keys between the primary (Mute, Vol down, Vol up, ...) and the secondary (F1, F2, F3, ...) behavior. On the new machines, FnLock is only available through BIOS setup (possibly through a yet-to-be-implemented feature in this driver) but not through Fn-ESC, but instead the ESC key itself switched between ESC and a "Paper Display" app for Windows. Unfortunately, that means that you can never have both ESC *and* the function keys working at the same time without needing to press Fn on one of them. As pointed out in the official Lenovo Forum by dozens of users, this makes the machine rather useless for any serious work [1]. I have now studied the ACPI DSDT one more time and found the event that is generated for the ESC key. Unlike all other key events on this machine, it is actually a WMI, while the other ones are read from the embedded controller. I am now installing a WMI notifier that uses the event number from the WMI subsystem as the scancode. The only event number generated here is '128', and that fits in nicely with the two existing ranges of scancodes used by the EC: 0-15 for the 16-bit VPCCMD_R_VPC register, 16-17 for the VPCCMD_R_NOVO register and 64-67 for VPCCMD_R_SPECIAL_BUTTONS. The only sane way to handle this button (in absence of the Windows Paper Display driver) seems to be to have it emit KEY_ESC, so that is what I use as the default. Should any user ever want to overwrite the default, they can install their own keymap. To ensure that we can still build the driver without adding a CONFIG_WMI dependency, all new code is enclosed in #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [1] https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/YOGA-3-14-How-to-reclaim-my-Esc-key-and-permanently-disable/td-p/2070816 Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-11-06 14:28:49 -07:00
#endif
acpi_remove_notify_handler(priv->adev->handle,
ACPI_DEVICE_NOTIFY, ideapad_acpi_notify);
ideapad_backlight_exit(priv);
for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
ideapad_unregister_rfkill(priv, i);
ideapad_input_exit(priv);
ideapad_debugfs_exit(priv);
ideapad_sysfs_exit(priv);
dev_set_drvdata(&pdev->dev, NULL);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int ideapad_acpi_resume(struct device *device)
{
struct ideapad_private *priv;
if (!device)
return -EINVAL;
priv = dev_get_drvdata(device);
ideapad_sync_rfk_state(priv);
ideapad_sync_touchpad_state(priv);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(ideapad_pm, NULL, ideapad_acpi_resume);
static const struct acpi_device_id ideapad_device_ids[] = {
{ "VPC2004", 0},
{ "", 0},
};
MODULE_DEVICE_TABLE(acpi, ideapad_device_ids);
static struct platform_driver ideapad_acpi_driver = {
.probe = ideapad_acpi_add,
.remove = ideapad_acpi_remove,
.driver = {
.name = "ideapad_acpi",
.pm = &ideapad_pm,
.acpi_match_table = ACPI_PTR(ideapad_device_ids),
},
};
module_platform_driver(ideapad_acpi_driver);
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
MODULE_DESCRIPTION("IdeaPad ACPI Extras");
MODULE_LICENSE("GPL");