1
0
Fork 0
alistair23-linux/arch/arm/kvm/mmu.c

1338 lines
34 KiB
C
Raw Normal View History

/*
* Copyright (C) 2012 - Virtual Open Systems and Columbia University
* Author: Christoffer Dall <c.dall@virtualopensystems.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include <linux/mman.h>
#include <linux/kvm_host.h>
#include <linux/io.h>
#include <linux/hugetlb.h>
#include <trace/events/kvm.h>
#include <asm/pgalloc.h>
#include <asm/cacheflush.h>
#include <asm/kvm_arm.h>
#include <asm/kvm_mmu.h>
#include <asm/kvm_mmio.h>
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
#include <asm/kvm_asm.h>
#include <asm/kvm_emulate.h>
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
#include "trace.h"
extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[];
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-12 12:12:06 -06:00
static pgd_t *boot_hyp_pgd;
static pgd_t *hyp_pgd;
static DEFINE_MUTEX(kvm_hyp_pgd_mutex);
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-12 12:12:06 -06:00
static void *init_bounce_page;
static unsigned long hyp_idmap_start;
static unsigned long hyp_idmap_end;
static phys_addr_t hyp_idmap_vector;
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
#define hyp_pgd_order get_order(PTRS_PER_PGD * sizeof(pgd_t))
#define kvm_pmd_huge(_x) (pmd_huge(_x) || pmd_trans_huge(_x))
static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
{
/*
* This function also gets called when dealing with HYP page
* tables. As HYP doesn't have an associated struct kvm (and
* the HYP page tables are fairly static), we don't do
* anything there.
*/
if (kvm)
kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
}
static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache,
int min, int max)
{
void *page;
BUG_ON(max > KVM_NR_MEM_OBJS);
if (cache->nobjs >= min)
return 0;
while (cache->nobjs < max) {
page = (void *)__get_free_page(PGALLOC_GFP);
if (!page)
return -ENOMEM;
cache->objects[cache->nobjs++] = page;
}
return 0;
}
static void mmu_free_memory_cache(struct kvm_mmu_memory_cache *mc)
{
while (mc->nobjs)
free_page((unsigned long)mc->objects[--mc->nobjs]);
}
static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc)
{
void *p;
BUG_ON(!mc || !mc->nobjs);
p = mc->objects[--mc->nobjs];
return p;
}
static void clear_pgd_entry(struct kvm *kvm, pgd_t *pgd, phys_addr_t addr)
{
pud_t *pud_table __maybe_unused = pud_offset(pgd, 0);
pgd_clear(pgd);
kvm_tlb_flush_vmid_ipa(kvm, addr);
pud_free(NULL, pud_table);
put_page(virt_to_page(pgd));
}
static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr)
{
pmd_t *pmd_table = pmd_offset(pud, 0);
VM_BUG_ON(pud_huge(*pud));
pud_clear(pud);
kvm_tlb_flush_vmid_ipa(kvm, addr);
pmd_free(NULL, pmd_table);
put_page(virt_to_page(pud));
}
static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr)
{
pte_t *pte_table = pte_offset_kernel(pmd, 0);
VM_BUG_ON(kvm_pmd_huge(*pmd));
pmd_clear(pmd);
kvm_tlb_flush_vmid_ipa(kvm, addr);
pte_free_kernel(NULL, pte_table);
put_page(virt_to_page(pmd));
}
static void unmap_ptes(struct kvm *kvm, pmd_t *pmd,
phys_addr_t addr, phys_addr_t end)
{
phys_addr_t start_addr = addr;
pte_t *pte, *start_pte;
start_pte = pte = pte_offset_kernel(pmd, addr);
do {
if (!pte_none(*pte)) {
kvm_set_pte(pte, __pte(0));
put_page(virt_to_page(pte));
kvm_tlb_flush_vmid_ipa(kvm, addr);
}
} while (pte++, addr += PAGE_SIZE, addr != end);
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
if (kvm_pte_table_empty(kvm, start_pte))
clear_pmd_entry(kvm, pmd, start_addr);
}
static void unmap_pmds(struct kvm *kvm, pud_t *pud,
phys_addr_t addr, phys_addr_t end)
{
phys_addr_t next, start_addr = addr;
pmd_t *pmd, *start_pmd;
start_pmd = pmd = pmd_offset(pud, addr);
do {
next = kvm_pmd_addr_end(addr, end);
if (!pmd_none(*pmd)) {
if (kvm_pmd_huge(*pmd)) {
pmd_clear(pmd);
kvm_tlb_flush_vmid_ipa(kvm, addr);
put_page(virt_to_page(pmd));
} else {
unmap_ptes(kvm, pmd, addr, next);
}
}
} while (pmd++, addr = next, addr != end);
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
if (kvm_pmd_table_empty(kvm, start_pmd))
clear_pud_entry(kvm, pud, start_addr);
}
static void unmap_puds(struct kvm *kvm, pgd_t *pgd,
phys_addr_t addr, phys_addr_t end)
{
phys_addr_t next, start_addr = addr;
pud_t *pud, *start_pud;
start_pud = pud = pud_offset(pgd, addr);
do {
next = kvm_pud_addr_end(addr, end);
if (!pud_none(*pud)) {
if (pud_huge(*pud)) {
pud_clear(pud);
kvm_tlb_flush_vmid_ipa(kvm, addr);
put_page(virt_to_page(pud));
} else {
unmap_pmds(kvm, pud, addr, next);
}
}
} while (pud++, addr = next, addr != end);
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
if (kvm_pud_table_empty(kvm, start_pud))
clear_pgd_entry(kvm, pgd, start_addr);
}
static void unmap_range(struct kvm *kvm, pgd_t *pgdp,
phys_addr_t start, u64 size)
{
pgd_t *pgd;
phys_addr_t addr = start, end = start + size;
phys_addr_t next;
pgd = pgdp + pgd_index(addr);
do {
next = kvm_pgd_addr_end(addr, end);
unmap_puds(kvm, pgd, addr, next);
} while (pgd++, addr = next, addr != end);
}
static void stage2_flush_ptes(struct kvm *kvm, pmd_t *pmd,
phys_addr_t addr, phys_addr_t end)
{
pte_t *pte;
pte = pte_offset_kernel(pmd, addr);
do {
if (!pte_none(*pte)) {
hva_t hva = gfn_to_hva(kvm, addr >> PAGE_SHIFT);
kvm_flush_dcache_to_poc((void*)hva, PAGE_SIZE);
}
} while (pte++, addr += PAGE_SIZE, addr != end);
}
static void stage2_flush_pmds(struct kvm *kvm, pud_t *pud,
phys_addr_t addr, phys_addr_t end)
{
pmd_t *pmd;
phys_addr_t next;
pmd = pmd_offset(pud, addr);
do {
next = kvm_pmd_addr_end(addr, end);
if (!pmd_none(*pmd)) {
if (kvm_pmd_huge(*pmd)) {
hva_t hva = gfn_to_hva(kvm, addr >> PAGE_SHIFT);
kvm_flush_dcache_to_poc((void*)hva, PMD_SIZE);
} else {
stage2_flush_ptes(kvm, pmd, addr, next);
}
}
} while (pmd++, addr = next, addr != end);
}
static void stage2_flush_puds(struct kvm *kvm, pgd_t *pgd,
phys_addr_t addr, phys_addr_t end)
{
pud_t *pud;
phys_addr_t next;
pud = pud_offset(pgd, addr);
do {
next = kvm_pud_addr_end(addr, end);
if (!pud_none(*pud)) {
if (pud_huge(*pud)) {
hva_t hva = gfn_to_hva(kvm, addr >> PAGE_SHIFT);
kvm_flush_dcache_to_poc((void*)hva, PUD_SIZE);
} else {
stage2_flush_pmds(kvm, pud, addr, next);
}
}
} while (pud++, addr = next, addr != end);
}
static void stage2_flush_memslot(struct kvm *kvm,
struct kvm_memory_slot *memslot)
{
phys_addr_t addr = memslot->base_gfn << PAGE_SHIFT;
phys_addr_t end = addr + PAGE_SIZE * memslot->npages;
phys_addr_t next;
pgd_t *pgd;
pgd = kvm->arch.pgd + pgd_index(addr);
do {
next = kvm_pgd_addr_end(addr, end);
stage2_flush_puds(kvm, pgd, addr, next);
} while (pgd++, addr = next, addr != end);
}
/**
* stage2_flush_vm - Invalidate cache for pages mapped in stage 2
* @kvm: The struct kvm pointer
*
* Go through the stage 2 page tables and invalidate any cache lines
* backing memory already mapped to the VM.
*/
void stage2_flush_vm(struct kvm *kvm)
{
struct kvm_memslots *slots;
struct kvm_memory_slot *memslot;
int idx;
idx = srcu_read_lock(&kvm->srcu);
spin_lock(&kvm->mmu_lock);
slots = kvm_memslots(kvm);
kvm_for_each_memslot(memslot, slots)
stage2_flush_memslot(kvm, memslot);
spin_unlock(&kvm->mmu_lock);
srcu_read_unlock(&kvm->srcu, idx);
}
/**
* free_boot_hyp_pgd - free HYP boot page tables
*
* Free the HYP boot page tables. The bounce page is also freed.
*/
void free_boot_hyp_pgd(void)
{
mutex_lock(&kvm_hyp_pgd_mutex);
if (boot_hyp_pgd) {
unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
free_pages((unsigned long)boot_hyp_pgd, hyp_pgd_order);
boot_hyp_pgd = NULL;
}
if (hyp_pgd)
unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
free_page((unsigned long)init_bounce_page);
init_bounce_page = NULL;
mutex_unlock(&kvm_hyp_pgd_mutex);
}
/**
* free_hyp_pgds - free Hyp-mode page tables
*
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-12 12:12:06 -06:00
* Assumes hyp_pgd is a page table used strictly in Hyp-mode and
* therefore contains either mappings in the kernel memory area (above
* PAGE_OFFSET), or device mappings in the vmalloc range (from
* VMALLOC_START to VMALLOC_END).
*
* boot_hyp_pgd should only map two pages for the init code.
*/
void free_hyp_pgds(void)
{
unsigned long addr;
free_boot_hyp_pgd();
mutex_lock(&kvm_hyp_pgd_mutex);
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-12 12:12:06 -06:00
if (hyp_pgd) {
for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE)
unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE)
unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
free_pages((unsigned long)hyp_pgd, hyp_pgd_order);
hyp_pgd = NULL;
}
mutex_unlock(&kvm_hyp_pgd_mutex);
}
static void create_hyp_pte_mappings(pmd_t *pmd, unsigned long start,
unsigned long end, unsigned long pfn,
pgprot_t prot)
{
pte_t *pte;
unsigned long addr;
addr = start;
do {
pte = pte_offset_kernel(pmd, addr);
kvm_set_pte(pte, pfn_pte(pfn, prot));
get_page(virt_to_page(pte));
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-12 12:12:06 -06:00
kvm_flush_dcache_to_poc(pte, sizeof(*pte));
pfn++;
} while (addr += PAGE_SIZE, addr != end);
}
static int create_hyp_pmd_mappings(pud_t *pud, unsigned long start,
unsigned long end, unsigned long pfn,
pgprot_t prot)
{
pmd_t *pmd;
pte_t *pte;
unsigned long addr, next;
addr = start;
do {
pmd = pmd_offset(pud, addr);
BUG_ON(pmd_sect(*pmd));
if (pmd_none(*pmd)) {
pte = pte_alloc_one_kernel(NULL, addr);
if (!pte) {
kvm_err("Cannot allocate Hyp pte\n");
return -ENOMEM;
}
pmd_populate_kernel(NULL, pmd, pte);
get_page(virt_to_page(pmd));
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-12 12:12:06 -06:00
kvm_flush_dcache_to_poc(pmd, sizeof(*pmd));
}
next = pmd_addr_end(addr, end);
create_hyp_pte_mappings(pmd, addr, next, pfn, prot);
pfn += (next - addr) >> PAGE_SHIFT;
} while (addr = next, addr != end);
return 0;
}
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
static int create_hyp_pud_mappings(pgd_t *pgd, unsigned long start,
unsigned long end, unsigned long pfn,
pgprot_t prot)
{
pud_t *pud;
pmd_t *pmd;
unsigned long addr, next;
int ret;
addr = start;
do {
pud = pud_offset(pgd, addr);
if (pud_none_or_clear_bad(pud)) {
pmd = pmd_alloc_one(NULL, addr);
if (!pmd) {
kvm_err("Cannot allocate Hyp pmd\n");
return -ENOMEM;
}
pud_populate(NULL, pud, pmd);
get_page(virt_to_page(pud));
kvm_flush_dcache_to_poc(pud, sizeof(*pud));
}
next = pud_addr_end(addr, end);
ret = create_hyp_pmd_mappings(pud, addr, next, pfn, prot);
if (ret)
return ret;
pfn += (next - addr) >> PAGE_SHIFT;
} while (addr = next, addr != end);
return 0;
}
static int __create_hyp_mappings(pgd_t *pgdp,
unsigned long start, unsigned long end,
unsigned long pfn, pgprot_t prot)
{
pgd_t *pgd;
pud_t *pud;
unsigned long addr, next;
int err = 0;
mutex_lock(&kvm_hyp_pgd_mutex);
addr = start & PAGE_MASK;
end = PAGE_ALIGN(end);
do {
pgd = pgdp + pgd_index(addr);
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
if (pgd_none(*pgd)) {
pud = pud_alloc_one(NULL, addr);
if (!pud) {
kvm_err("Cannot allocate Hyp pud\n");
err = -ENOMEM;
goto out;
}
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
pgd_populate(NULL, pgd, pud);
get_page(virt_to_page(pgd));
kvm_flush_dcache_to_poc(pgd, sizeof(*pgd));
}
next = pgd_addr_end(addr, end);
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
err = create_hyp_pud_mappings(pgd, addr, next, pfn, prot);
if (err)
goto out;
pfn += (next - addr) >> PAGE_SHIFT;
} while (addr = next, addr != end);
out:
mutex_unlock(&kvm_hyp_pgd_mutex);
return err;
}
static phys_addr_t kvm_kaddr_to_phys(void *kaddr)
{
if (!is_vmalloc_addr(kaddr)) {
BUG_ON(!virt_addr_valid(kaddr));
return __pa(kaddr);
} else {
return page_to_phys(vmalloc_to_page(kaddr)) +
offset_in_page(kaddr);
}
}
/**
* create_hyp_mappings - duplicate a kernel virtual address range in Hyp mode
* @from: The virtual kernel start address of the range
* @to: The virtual kernel end address of the range (exclusive)
*
* The same virtual address as the kernel virtual address is also used
* in Hyp-mode mapping (modulo HYP_PAGE_OFFSET) to the same underlying
* physical pages.
*/
int create_hyp_mappings(void *from, void *to)
{
phys_addr_t phys_addr;
unsigned long virt_addr;
unsigned long start = KERN_TO_HYP((unsigned long)from);
unsigned long end = KERN_TO_HYP((unsigned long)to);
start = start & PAGE_MASK;
end = PAGE_ALIGN(end);
for (virt_addr = start; virt_addr < end; virt_addr += PAGE_SIZE) {
int err;
phys_addr = kvm_kaddr_to_phys(from + virt_addr - start);
err = __create_hyp_mappings(hyp_pgd, virt_addr,
virt_addr + PAGE_SIZE,
__phys_to_pfn(phys_addr),
PAGE_HYP);
if (err)
return err;
}
return 0;
}
/**
* create_hyp_io_mappings - duplicate a kernel IO mapping into Hyp mode
* @from: The kernel start VA of the range
* @to: The kernel end VA of the range (exclusive)
* @phys_addr: The physical start address which gets mapped
*
* The resulting HYP VA is the same as the kernel VA, modulo
* HYP_PAGE_OFFSET.
*/
int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr)
{
unsigned long start = KERN_TO_HYP((unsigned long)from);
unsigned long end = KERN_TO_HYP((unsigned long)to);
/* Check for a valid kernel IO mapping */
if (!is_vmalloc_addr(from) || !is_vmalloc_addr(to - 1))
return -EINVAL;
return __create_hyp_mappings(hyp_pgd, start, end,
__phys_to_pfn(phys_addr), PAGE_HYP_DEVICE);
}
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
/**
* kvm_alloc_stage2_pgd - allocate level-1 table for stage-2 translation.
* @kvm: The KVM struct pointer for the VM.
*
* Allocates the 1st level table only of size defined by S2_PGD_ORDER (can
* support either full 40-bit input addresses or limited to 32-bit input
* addresses). Clears the allocated pages.
*
* Note we don't need locking here as this is only called when the VM is
* created, which can only be done once.
*/
int kvm_alloc_stage2_pgd(struct kvm *kvm)
{
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
int ret;
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
pgd_t *pgd;
if (kvm->arch.pgd != NULL) {
kvm_err("kvm_arch already initialized?\n");
return -EINVAL;
}
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
if (KVM_PREALLOC_LEVEL > 0) {
/*
* Allocate fake pgd for the page table manipulation macros to
* work. This is not used by the hardware and we have no
* alignment requirement for this allocation.
*/
pgd = (pgd_t *)kmalloc(PTRS_PER_S2_PGD * sizeof(pgd_t),
GFP_KERNEL | __GFP_ZERO);
} else {
/*
* Allocate actual first-level Stage-2 page table used by the
* hardware for Stage-2 page table walks.
*/
pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, S2_PGD_ORDER);
}
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
if (!pgd)
return -ENOMEM;
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
ret = kvm_prealloc_hwpgd(kvm, pgd);
if (ret)
goto out_err;
kvm_clean_pgd(pgd);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
kvm->arch.pgd = pgd;
return 0;
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
out_err:
if (KVM_PREALLOC_LEVEL > 0)
kfree(pgd);
else
free_pages((unsigned long)pgd, S2_PGD_ORDER);
return ret;
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
}
/**
* unmap_stage2_range -- Clear stage2 page table entries to unmap a range
* @kvm: The VM pointer
* @start: The intermediate physical base address of the range to unmap
* @size: The size of the area to unmap
*
* Clear a range of stage-2 mappings, lowering the various ref-counts. Must
* be called while holding mmu_lock (unless for freeing the stage2 pgd before
* destroying the VM), otherwise another faulting VCPU may come in and mess
* with things behind our backs.
*/
static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size)
{
unmap_range(kvm, kvm->arch.pgd, start, size);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
}
/**
* kvm_free_stage2_pgd - free all stage-2 tables
* @kvm: The KVM struct pointer for the VM.
*
* Walks the level-1 page table pointed to by kvm->arch.pgd and frees all
* underlying level-2 and level-3 tables before freeing the actual level-1 table
* and setting the struct pointer to NULL.
*
* Note we don't need locking here as this is only called when the VM is
* destroyed, which can only be done once.
*/
void kvm_free_stage2_pgd(struct kvm *kvm)
{
if (kvm->arch.pgd == NULL)
return;
unmap_stage2_range(kvm, 0, KVM_PHYS_SIZE);
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
kvm_free_hwpgd(kvm);
if (KVM_PREALLOC_LEVEL > 0)
kfree(kvm->arch.pgd);
else
free_pages((unsigned long)kvm->arch.pgd, S2_PGD_ORDER);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
kvm->arch.pgd = NULL;
}
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
static pud_t *stage2_get_pud(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
phys_addr_t addr)
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
{
pgd_t *pgd;
pud_t *pud;
pgd = kvm->arch.pgd + pgd_index(addr);
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
if (WARN_ON(pgd_none(*pgd))) {
if (!cache)
return NULL;
pud = mmu_memory_cache_alloc(cache);
pgd_populate(NULL, pgd, pud);
get_page(virt_to_page(pgd));
}
return pud_offset(pgd, addr);
}
static pmd_t *stage2_get_pmd(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
phys_addr_t addr)
{
pud_t *pud;
pmd_t *pmd;
pud = stage2_get_pud(kvm, cache, addr);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
if (pud_none(*pud)) {
if (!cache)
return NULL;
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
pmd = mmu_memory_cache_alloc(cache);
pud_populate(NULL, pud, pmd);
get_page(virt_to_page(pud));
}
return pmd_offset(pud, addr);
}
static int stage2_set_pmd_huge(struct kvm *kvm, struct kvm_mmu_memory_cache
*cache, phys_addr_t addr, const pmd_t *new_pmd)
{
pmd_t *pmd, old_pmd;
pmd = stage2_get_pmd(kvm, cache, addr);
VM_BUG_ON(!pmd);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
/*
* Mapping in huge pages should only happen through a fault. If a
* page is merged into a transparent huge page, the individual
* subpages of that huge page should be unmapped through MMU
* notifiers before we get here.
*
* Merging of CompoundPages is not supported; they should become
* splitting first, unmapped, merged, and mapped back in on-demand.
*/
VM_BUG_ON(pmd_present(*pmd) && pmd_pfn(*pmd) != pmd_pfn(*new_pmd));
old_pmd = *pmd;
kvm_set_pmd(pmd, *new_pmd);
if (pmd_present(old_pmd))
kvm_tlb_flush_vmid_ipa(kvm, addr);
else
get_page(virt_to_page(pmd));
return 0;
}
static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
phys_addr_t addr, const pte_t *new_pte, bool iomap)
{
pmd_t *pmd;
pte_t *pte, old_pte;
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
/* Create stage-2 page table mapping - Levels 0 and 1 */
pmd = stage2_get_pmd(kvm, cache, addr);
if (!pmd) {
/*
* Ignore calls from kvm_set_spte_hva for unallocated
* address ranges.
*/
return 0;
}
/* Create stage-2 page mappings - Level 2 */
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
if (pmd_none(*pmd)) {
if (!cache)
return 0; /* ignore calls from kvm_set_spte_hva */
pte = mmu_memory_cache_alloc(cache);
kvm_clean_pte(pte);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
pmd_populate_kernel(NULL, pmd, pte);
get_page(virt_to_page(pmd));
}
pte = pte_offset_kernel(pmd, addr);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
if (iomap && pte_present(*pte))
return -EFAULT;
/* Create 2nd stage page table mapping - Level 3 */
old_pte = *pte;
kvm_set_pte(pte, *new_pte);
if (pte_present(old_pte))
kvm_tlb_flush_vmid_ipa(kvm, addr);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
else
get_page(virt_to_page(pte));
return 0;
}
/**
* kvm_phys_addr_ioremap - map a device range to guest IPA
*
* @kvm: The KVM pointer
* @guest_ipa: The IPA at which to insert the mapping
* @pa: The physical address of the device
* @size: The size of the mapping
*/
int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
phys_addr_t pa, unsigned long size, bool writable)
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
{
phys_addr_t addr, end;
int ret = 0;
unsigned long pfn;
struct kvm_mmu_memory_cache cache = { 0, };
end = (guest_ipa + size + PAGE_SIZE - 1) & PAGE_MASK;
pfn = __phys_to_pfn(pa);
for (addr = guest_ipa; addr < end; addr += PAGE_SIZE) {
pte_t pte = pfn_pte(pfn, PAGE_S2_DEVICE);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
if (writable)
kvm_set_s2pte_writable(&pte);
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
ret = mmu_topup_memory_cache(&cache, KVM_MMU_CACHE_MIN_PAGES,
KVM_NR_MEM_OBJS);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
if (ret)
goto out;
spin_lock(&kvm->mmu_lock);
ret = stage2_set_pte(kvm, &cache, addr, &pte, true);
spin_unlock(&kvm->mmu_lock);
if (ret)
goto out;
pfn++;
}
out:
mmu_free_memory_cache(&cache);
return ret;
}
static bool transparent_hugepage_adjust(pfn_t *pfnp, phys_addr_t *ipap)
{
pfn_t pfn = *pfnp;
gfn_t gfn = *ipap >> PAGE_SHIFT;
if (PageTransCompound(pfn_to_page(pfn))) {
unsigned long mask;
/*
* The address we faulted on is backed by a transparent huge
* page. However, because we map the compound huge page and
* not the individual tail page, we need to transfer the
* refcount to the head page. We have to be careful that the
* THP doesn't start to split while we are adjusting the
* refcounts.
*
* We are sure this doesn't happen, because mmu_notifier_retry
* was successful and we are holding the mmu_lock, so if this
* THP is trying to split, it will be blocked in the mmu
* notifier before touching any of the pages, specifically
* before being able to call __split_huge_page_refcount().
*
* We can therefore safely transfer the refcount from PG_tail
* to PG_head and switch the pfn from a tail page to the head
* page accordingly.
*/
mask = PTRS_PER_PMD - 1;
VM_BUG_ON((gfn & mask) != (pfn & mask));
if (pfn & mask) {
*ipap &= PMD_MASK;
kvm_release_pfn_clean(pfn);
pfn &= ~mask;
kvm_get_pfn(pfn);
*pfnp = pfn;
}
return true;
}
return false;
}
static bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
{
if (kvm_vcpu_trap_is_iabt(vcpu))
return false;
return kvm_vcpu_dabt_iswrite(vcpu);
}
static bool kvm_is_device_pfn(unsigned long pfn)
{
return !pfn_valid(pfn);
}
static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
struct kvm_memory_slot *memslot, unsigned long hva,
unsigned long fault_status)
{
int ret;
bool write_fault, writable, hugetlb = false, force_pte = false;
unsigned long mmu_seq;
gfn_t gfn = fault_ipa >> PAGE_SHIFT;
struct kvm *kvm = vcpu->kvm;
struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache;
struct vm_area_struct *vma;
pfn_t pfn;
pgprot_t mem_type = PAGE_S2;
bool fault_ipa_uncached;
write_fault = kvm_is_write_fault(vcpu);
if (fault_status == FSC_PERM && !write_fault) {
kvm_err("Unexpected L2 read permission error\n");
return -EFAULT;
}
/* Let's check if we will get back a huge page backed by hugetlbfs */
down_read(&current->mm->mmap_sem);
vma = find_vma_intersection(current->mm, hva, hva + 1);
if (unlikely(!vma)) {
kvm_err("Failed to find VMA for hva 0x%lx\n", hva);
up_read(&current->mm->mmap_sem);
return -EFAULT;
}
if (is_vm_hugetlb_page(vma)) {
hugetlb = true;
gfn = (fault_ipa & PMD_MASK) >> PAGE_SHIFT;
} else {
/*
* Pages belonging to memslots that don't have the same
* alignment for userspace and IPA cannot be mapped using
* block descriptors even if the pages belong to a THP for
* the process, because the stage-2 block descriptor will
* cover more than a single THP and we loose atomicity for
* unmapping, updates, and splits of the THP or other pages
* in the stage-2 block range.
*/
if ((memslot->userspace_addr & ~PMD_MASK) !=
((memslot->base_gfn << PAGE_SHIFT) & ~PMD_MASK))
force_pte = true;
}
up_read(&current->mm->mmap_sem);
/* We need minimum second+third level pages */
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
ret = mmu_topup_memory_cache(memcache, KVM_MMU_CACHE_MIN_PAGES,
KVM_NR_MEM_OBJS);
if (ret)
return ret;
mmu_seq = vcpu->kvm->mmu_notifier_seq;
/*
* Ensure the read of mmu_notifier_seq happens before we call
* gfn_to_pfn_prot (which calls get_user_pages), so that we don't risk
* the page we just got a reference to gets unmapped before we have a
* chance to grab the mmu_lock, which ensure that if the page gets
* unmapped afterwards, the call to kvm_unmap_hva will take it away
* from us again properly. This smp_rmb() interacts with the smp_wmb()
* in kvm_mmu_notifier_invalidate_<page|range_end>.
*/
smp_rmb();
pfn = gfn_to_pfn_prot(kvm, gfn, write_fault, &writable);
if (is_error_pfn(pfn))
return -EFAULT;
if (kvm_is_device_pfn(pfn))
mem_type = PAGE_S2_DEVICE;
spin_lock(&kvm->mmu_lock);
if (mmu_notifier_retry(kvm, mmu_seq))
goto out_unlock;
if (!hugetlb && !force_pte)
hugetlb = transparent_hugepage_adjust(&pfn, &fault_ipa);
fault_ipa_uncached = false;
if (hugetlb) {
pmd_t new_pmd = pfn_pmd(pfn, mem_type);
new_pmd = pmd_mkhuge(new_pmd);
if (writable) {
kvm_set_s2pmd_writable(&new_pmd);
kvm_set_pfn_dirty(pfn);
}
coherent_cache_guest_page(vcpu, hva & PMD_MASK, PMD_SIZE,
fault_ipa_uncached);
ret = stage2_set_pmd_huge(kvm, memcache, fault_ipa, &new_pmd);
} else {
pte_t new_pte = pfn_pte(pfn, mem_type);
if (writable) {
kvm_set_s2pte_writable(&new_pte);
kvm_set_pfn_dirty(pfn);
}
coherent_cache_guest_page(vcpu, hva, PAGE_SIZE,
fault_ipa_uncached);
ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte,
pgprot_val(mem_type) == pgprot_val(PAGE_S2_DEVICE));
}
out_unlock:
spin_unlock(&kvm->mmu_lock);
kvm_release_pfn_clean(pfn);
return ret;
}
/**
* kvm_handle_guest_abort - handles all 2nd stage aborts
* @vcpu: the VCPU pointer
* @run: the kvm_run structure
*
* Any abort that gets to the host is almost guaranteed to be caused by a
* missing second stage translation table entry, which can mean that either the
* guest simply needs more memory and we must allocate an appropriate page or it
* can mean that the guest tried to access I/O memory, which is emulated by user
* space. The distinction is based on the IPA causing the fault and whether this
* memory region has been registered as standard RAM by user space.
*/
int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
unsigned long fault_status;
phys_addr_t fault_ipa;
struct kvm_memory_slot *memslot;
unsigned long hva;
bool is_iabt, write_fault, writable;
gfn_t gfn;
int ret, idx;
is_iabt = kvm_vcpu_trap_is_iabt(vcpu);
fault_ipa = kvm_vcpu_get_fault_ipa(vcpu);
trace_kvm_guest_fault(*vcpu_pc(vcpu), kvm_vcpu_get_hsr(vcpu),
kvm_vcpu_get_hfar(vcpu), fault_ipa);
/* Check the stage-2 fault is trans. fault or write fault */
fault_status = kvm_vcpu_trap_get_fault_type(vcpu);
if (fault_status != FSC_FAULT && fault_status != FSC_PERM) {
kvm_err("Unsupported FSC: EC=%#x xFSC=%#lx ESR_EL2=%#lx\n",
kvm_vcpu_trap_get_class(vcpu),
(unsigned long)kvm_vcpu_trap_get_fault(vcpu),
(unsigned long)kvm_vcpu_get_hsr(vcpu));
return -EFAULT;
}
idx = srcu_read_lock(&vcpu->kvm->srcu);
gfn = fault_ipa >> PAGE_SHIFT;
memslot = gfn_to_memslot(vcpu->kvm, gfn);
hva = gfn_to_hva_memslot_prot(memslot, gfn, &writable);
write_fault = kvm_is_write_fault(vcpu);
if (kvm_is_error_hva(hva) || (write_fault && !writable)) {
if (is_iabt) {
/* Prefetch Abort on I/O address */
kvm_inject_pabt(vcpu, kvm_vcpu_get_hfar(vcpu));
ret = 1;
goto out_unlock;
}
/*
* The IPA is reported as [MAX:12], so we need to
* complement it with the bottom 12 bits from the
* faulting VA. This is always 12 bits, irrespective
* of the page size.
*/
fault_ipa |= kvm_vcpu_get_hfar(vcpu) & ((1 << 12) - 1);
ret = io_mem_abort(vcpu, run, fault_ipa);
goto out_unlock;
}
/* Userspace should not be able to register out-of-bounds IPAs */
VM_BUG_ON(fault_ipa >= KVM_PHYS_SIZE);
ret = user_mem_abort(vcpu, fault_ipa, memslot, hva, fault_status);
if (ret == 0)
ret = 1;
out_unlock:
srcu_read_unlock(&vcpu->kvm->srcu, idx);
return ret;
}
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
static void handle_hva_to_gpa(struct kvm *kvm,
unsigned long start,
unsigned long end,
void (*handler)(struct kvm *kvm,
gpa_t gpa, void *data),
void *data)
{
struct kvm_memslots *slots;
struct kvm_memory_slot *memslot;
slots = kvm_memslots(kvm);
/* we only care about the pages that the guest sees */
kvm_for_each_memslot(memslot, slots) {
unsigned long hva_start, hva_end;
gfn_t gfn, gfn_end;
hva_start = max(start, memslot->userspace_addr);
hva_end = min(end, memslot->userspace_addr +
(memslot->npages << PAGE_SHIFT));
if (hva_start >= hva_end)
continue;
/*
* {gfn(page) | page intersects with [hva_start, hva_end)} =
* {gfn_start, gfn_start+1, ..., gfn_end-1}.
*/
gfn = hva_to_gfn_memslot(hva_start, memslot);
gfn_end = hva_to_gfn_memslot(hva_end + PAGE_SIZE - 1, memslot);
for (; gfn < gfn_end; ++gfn) {
gpa_t gpa = gfn << PAGE_SHIFT;
handler(kvm, gpa, data);
}
}
}
static void kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data)
{
unmap_stage2_range(kvm, gpa, PAGE_SIZE);
}
int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
{
unsigned long end = hva + PAGE_SIZE;
if (!kvm->arch.pgd)
return 0;
trace_kvm_unmap_hva(hva);
handle_hva_to_gpa(kvm, hva, end, &kvm_unmap_hva_handler, NULL);
return 0;
}
int kvm_unmap_hva_range(struct kvm *kvm,
unsigned long start, unsigned long end)
{
if (!kvm->arch.pgd)
return 0;
trace_kvm_unmap_hva_range(start, end);
handle_hva_to_gpa(kvm, start, end, &kvm_unmap_hva_handler, NULL);
return 0;
}
static void kvm_set_spte_handler(struct kvm *kvm, gpa_t gpa, void *data)
{
pte_t *pte = (pte_t *)data;
stage2_set_pte(kvm, NULL, gpa, pte, false);
}
void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte)
{
unsigned long end = hva + PAGE_SIZE;
pte_t stage2_pte;
if (!kvm->arch.pgd)
return;
trace_kvm_set_spte_hva(hva);
stage2_pte = pfn_pte(pte_pfn(pte), PAGE_S2);
handle_hva_to_gpa(kvm, hva, end, &kvm_set_spte_handler, &stage2_pte);
}
void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu)
{
mmu_free_memory_cache(&vcpu->arch.mmu_page_cache);
}
phys_addr_t kvm_mmu_get_httbr(void)
{
return virt_to_phys(hyp_pgd);
}
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-12 12:12:06 -06:00
phys_addr_t kvm_mmu_get_boot_httbr(void)
{
return virt_to_phys(boot_hyp_pgd);
}
phys_addr_t kvm_get_idmap_vector(void)
{
return hyp_idmap_vector;
}
int kvm_mmu_init(void)
{
int err;
hyp_idmap_start = kvm_virt_to_phys(__hyp_idmap_text_start);
hyp_idmap_end = kvm_virt_to_phys(__hyp_idmap_text_end);
hyp_idmap_vector = kvm_virt_to_phys(__kvm_hyp_init);
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-12 12:12:06 -06:00
if ((hyp_idmap_start ^ hyp_idmap_end) & PAGE_MASK) {
/*
* Our init code is crossing a page boundary. Allocate
* a bounce page, copy the code over and use that.
*/
size_t len = __hyp_idmap_text_end - __hyp_idmap_text_start;
phys_addr_t phys_base;
init_bounce_page = (void *)__get_free_page(GFP_KERNEL);
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-12 12:12:06 -06:00
if (!init_bounce_page) {
kvm_err("Couldn't allocate HYP init bounce page\n");
err = -ENOMEM;
goto out;
}
memcpy(init_bounce_page, __hyp_idmap_text_start, len);
/*
* Warning: the code we just copied to the bounce page
* must be flushed to the point of coherency.
* Otherwise, the data may be sitting in L2, and HYP
* mode won't be able to observe it as it runs with
* caches off at that point.
*/
kvm_flush_dcache_to_poc(init_bounce_page, len);
phys_base = kvm_virt_to_phys(init_bounce_page);
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-12 12:12:06 -06:00
hyp_idmap_vector += phys_base - hyp_idmap_start;
hyp_idmap_start = phys_base;
hyp_idmap_end = phys_base + len;
kvm_info("Using HYP init bounce page @%lx\n",
(unsigned long)phys_base);
}
arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 This patch adds the necessary support for all host kernel PGSIZE and VA_SPACE configuration options for both EL2 and the Stage-2 page tables. However, for 40bit and 42bit PARange systems, the architecture mandates that VTCR_EL2.SL0 is maximum 1, resulting in fewer levels of stage-2 pagge tables than levels of host kernel page tables. At the same time, systems with a PARange > 42bit, we limit the IPA range by always setting VTCR_EL2.T0SZ to 24. To solve the situation with different levels of page tables for Stage-2 translation than the host kernel page tables, we allocate a dummy PGD with pointers to our actual inital level Stage-2 page table, in order for us to reuse the kernel pgtable manipulation primitives. Reproducing all these in KVM does not look pretty and unnecessarily complicates the 32-bit side. Systems with a PARange < 40bits are not yet supported. [ I have reworked this patch from its original form submitted by Jungseok to take the architecture constraints into consideration. There were too many changes from the original patch for me to preserve the authorship. Thanks to Catalin Marinas for his help in figuring out a good solution to this challenge. I have also fixed various bugs and missing error code handling from the original patch. - Christoffer ] Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-10-10 04:14:28 -06:00
hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, hyp_pgd_order);
boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, hyp_pgd_order);
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-12 12:12:06 -06:00
if (!hyp_pgd || !boot_hyp_pgd) {
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
kvm_err("Hyp mode PGD not allocated\n");
err = -ENOMEM;
goto out;
}
/* Create the idmap in the boot page tables */
err = __create_hyp_mappings(boot_hyp_pgd,
hyp_idmap_start, hyp_idmap_end,
__phys_to_pfn(hyp_idmap_start),
PAGE_HYP);
if (err) {
kvm_err("Failed to idmap %lx-%lx\n",
hyp_idmap_start, hyp_idmap_end);
goto out;
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
}
ARM: KVM: switch to a dual-step HYP init code Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-12 12:12:06 -06:00
/* Map the very same page at the trampoline VA */
err = __create_hyp_mappings(boot_hyp_pgd,
TRAMPOLINE_VA, TRAMPOLINE_VA + PAGE_SIZE,
__phys_to_pfn(hyp_idmap_start),
PAGE_HYP);
if (err) {
kvm_err("Failed to map trampoline @%lx into boot HYP pgd\n",
TRAMPOLINE_VA);
goto out;
}
/* Map the same page again into the runtime page tables */
err = __create_hyp_mappings(hyp_pgd,
TRAMPOLINE_VA, TRAMPOLINE_VA + PAGE_SIZE,
__phys_to_pfn(hyp_idmap_start),
PAGE_HYP);
if (err) {
kvm_err("Failed to map trampoline @%lx into runtime HYP pgd\n",
TRAMPOLINE_VA);
goto out;
}
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-20 16:28:07 -07:00
return 0;
out:
free_hyp_pgds();
return err;
}
void kvm_arch_commit_memory_region(struct kvm *kvm,
struct kvm_userspace_memory_region *mem,
const struct kvm_memory_slot *old,
enum kvm_mr_change change)
{
}
int kvm_arch_prepare_memory_region(struct kvm *kvm,
struct kvm_memory_slot *memslot,
struct kvm_userspace_memory_region *mem,
enum kvm_mr_change change)
{
hva_t hva = mem->userspace_addr;
hva_t reg_end = hva + mem->memory_size;
bool writable = !(mem->flags & KVM_MEM_READONLY);
int ret = 0;
if (change != KVM_MR_CREATE && change != KVM_MR_MOVE)
return 0;
/*
* Prevent userspace from creating a memory region outside of the IPA
* space addressable by the KVM guest IPA space.
*/
if (memslot->base_gfn + memslot->npages >=
(KVM_PHYS_SIZE >> PAGE_SHIFT))
return -EFAULT;
/*
* A memory region could potentially cover multiple VMAs, and any holes
* between them, so iterate over all of them to find out if we can map
* any of them right now.
*
* +--------------------------------------------+
* +---------------+----------------+ +----------------+
* | : VMA 1 | VMA 2 | | VMA 3 : |
* +---------------+----------------+ +----------------+
* | memory region |
* +--------------------------------------------+
*/
do {
struct vm_area_struct *vma = find_vma(current->mm, hva);
hva_t vm_start, vm_end;
if (!vma || vma->vm_start >= reg_end)
break;
/*
* Mapping a read-only VMA is only allowed if the
* memory region is configured as read-only.
*/
if (writable && !(vma->vm_flags & VM_WRITE)) {
ret = -EPERM;
break;
}
/*
* Take the intersection of this VMA with the memory region
*/
vm_start = max(hva, vma->vm_start);
vm_end = min(reg_end, vma->vm_end);
if (vma->vm_flags & VM_PFNMAP) {
gpa_t gpa = mem->guest_phys_addr +
(vm_start - mem->userspace_addr);
phys_addr_t pa = (vma->vm_pgoff << PAGE_SHIFT) +
vm_start - vma->vm_start;
ret = kvm_phys_addr_ioremap(kvm, gpa, pa,
vm_end - vm_start,
writable);
if (ret)
break;
}
hva = vm_end;
} while (hva < reg_end);
if (ret) {
spin_lock(&kvm->mmu_lock);
unmap_stage2_range(kvm, mem->guest_phys_addr, mem->memory_size);
spin_unlock(&kvm->mmu_lock);
}
return ret;
}
void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free,
struct kvm_memory_slot *dont)
{
}
int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot,
unsigned long npages)
{
return 0;
}
void kvm_arch_memslots_updated(struct kvm *kvm)
{
}
void kvm_arch_flush_shadow_all(struct kvm *kvm)
{
}
void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
struct kvm_memory_slot *slot)
{
gpa_t gpa = slot->base_gfn << PAGE_SHIFT;
phys_addr_t size = slot->npages << PAGE_SHIFT;
spin_lock(&kvm->mmu_lock);
unmap_stage2_range(kvm, gpa, size);
spin_unlock(&kvm->mmu_lock);
}