1
0
Fork 0
alistair23-linux/arch/powerpc/mm/hash_utils_64.c

1912 lines
50 KiB
C
Raw Normal View History

/*
* PowerPC64 port by Mike Corrigan and Dave Engebretsen
* {mikejc|engebret}@us.ibm.com
*
* Copyright (c) 2000 Mike Corrigan <mikejc@us.ibm.com>
*
* SMP scalability work:
* Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
*
* Module name: htab.c
*
* Description:
* PowerPC Hashed Page Table functions
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#undef DEBUG
#undef DEBUG_LOW
#define pr_fmt(fmt) "hash-mmu: " fmt
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/sched/mm.h>
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <linux/sysctl.h>
#include <linux/export.h>
#include <linux/ctype.h>
#include <linux/cache.h>
#include <linux/init.h>
#include <linux/signal.h>
#include <linux/memblock.h>
#include <linux/context_tracking.h>
#include <linux/libfdt.h>
#include <linux/pkeys.h>
#include <asm/debugfs.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/mmu_context.h>
#include <asm/page.h>
#include <asm/types.h>
#include <linux/uaccess.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/io.h>
#include <asm/eeh.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
#include <asm/cputable.h>
#include <asm/sections.h>
#include <asm/copro.h>
#include <asm/udbg.h>
#include <asm/code-patching.h>
#include <asm/fadump.h>
#include <asm/firmware.h>
#include <asm/tm.h>
powerpc/mm: Add trace point for tracking hash pte fault This enables us to understand how many hash fault we are taking when running benchmarks. For ex: -bash-4.2# ./perf stat -e powerpc:hash_fault -e page-faults /tmp/ebizzy.ppc64 -S 30 -P -n 1000 ... Performance counter stats for '/tmp/ebizzy.ppc64 -S 30 -P -n 1000': 1,10,04,075 powerpc:hash_fault 1,10,03,429 page-faults 30.865978991 seconds time elapsed NOTE: The impact of the tracepoint was not noticeable when running test. It was within the run-time variance of the test. For ex: without-patch: -------------- Performance counter stats for './a.out 3000 300': 643 page-faults # 0.089 M/sec 7.236562 task-clock (msec) # 0.928 CPUs utilized 2,179,213 stalled-cycles-frontend # 0.00% frontend cycles idle 17,174,367 stalled-cycles-backend # 0.00% backend cycles idle 0 context-switches # 0.000 K/sec 0.007794658 seconds time elapsed And with-patch: --------------- Performance counter stats for './a.out 3000 300': 643 page-faults # 0.089 M/sec 7.233746 task-clock (msec) # 0.921 CPUs utilized 0 context-switches # 0.000 K/sec 0.007854876 seconds time elapsed Performance counter stats for './a.out 3000 300': 643 page-faults # 0.087 M/sec 649 powerpc:hash_fault # 0.087 M/sec 7.430376 task-clock (msec) # 0.938 CPUs utilized 2,347,174 stalled-cycles-frontend # 0.00% frontend cycles idle 17,524,282 stalled-cycles-backend # 0.00% backend cycles idle 0 context-switches # 0.000 K/sec 0.007920284 seconds time elapsed Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-14 01:35:57 -06:00
#include <asm/trace.h>
#include <asm/ps3.h>
#include <asm/pte-walk.h>
#include <asm/asm-prototypes.h>
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
#ifdef DEBUG_LOW
#define DBG_LOW(fmt...) udbg_printf(fmt)
#else
#define DBG_LOW(fmt...)
#endif
#define KB (1024)
#define MB (1024*KB)
#define GB (1024L*MB)
/*
* Note: pte --> Linux PTE
* HPTE --> PowerPC Hashed Page Table Entry
*
* Execution context:
* htab_initialize is called with the MMU off (of course), but
* the kernel has been copied down to zero so it can directly
* reference global data. At this point it is very difficult
* to print debug info.
*
*/
static unsigned long _SDR1;
struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
EXPORT_SYMBOL_GPL(mmu_psize_defs);
u8 hpte_page_sizes[1 << LP_BITS];
EXPORT_SYMBOL_GPL(hpte_page_sizes);
struct hash_pte *htab_address;
unsigned long htab_size_bytes;
unsigned long htab_hash_mask;
EXPORT_SYMBOL_GPL(htab_hash_mask);
int mmu_linear_psize = MMU_PAGE_4K;
EXPORT_SYMBOL_GPL(mmu_linear_psize);
int mmu_virtual_psize = MMU_PAGE_4K;
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-14 18:45:18 -06:00
int mmu_vmalloc_psize = MMU_PAGE_4K;
#ifdef CONFIG_SPARSEMEM_VMEMMAP
int mmu_vmemmap_psize = MMU_PAGE_4K;
#endif
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-14 18:45:18 -06:00
int mmu_io_psize = MMU_PAGE_4K;
int mmu_kernel_ssize = MMU_SEGSIZE_256M;
EXPORT_SYMBOL_GPL(mmu_kernel_ssize);
int mmu_highuser_ssize = MMU_SEGSIZE_256M;
u16 mmu_slb_size = 64;
EXPORT_SYMBOL_GPL(mmu_slb_size);
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-14 18:45:18 -06:00
#ifdef CONFIG_PPC_64K_PAGES
int mmu_ci_restrictions;
#endif
#ifdef CONFIG_DEBUG_PAGEALLOC
static u8 *linear_map_hash_slots;
static unsigned long linear_map_hash_count;
static DEFINE_SPINLOCK(linear_map_hash_lock);
#endif /* CONFIG_DEBUG_PAGEALLOC */
struct mmu_hash_ops mmu_hash_ops;
EXPORT_SYMBOL(mmu_hash_ops);
/* There are definitions of page sizes arrays to be used when none
* is provided by the firmware.
*/
/*
* Fallback (4k pages only)
*/
static struct mmu_psize_def mmu_psize_defaults[] = {
[MMU_PAGE_4K] = {
.shift = 12,
.sllp = 0,
.penc = {[MMU_PAGE_4K] = 0, [1 ... MMU_PAGE_COUNT - 1] = -1},
.avpnm = 0,
.tlbiel = 0,
},
};
/* POWER4, GPUL, POWER5
*
* Support for 16Mb large pages
*/
static struct mmu_psize_def mmu_psize_defaults_gp[] = {
[MMU_PAGE_4K] = {
.shift = 12,
.sllp = 0,
.penc = {[MMU_PAGE_4K] = 0, [1 ... MMU_PAGE_COUNT - 1] = -1},
.avpnm = 0,
.tlbiel = 1,
},
[MMU_PAGE_16M] = {
.shift = 24,
.sllp = SLB_VSID_L,
.penc = {[0 ... MMU_PAGE_16M - 1] = -1, [MMU_PAGE_16M] = 0,
[MMU_PAGE_16M + 1 ... MMU_PAGE_COUNT - 1] = -1 },
.avpnm = 0x1UL,
.tlbiel = 0,
},
};
powerpc/mm/hash: Fix the reference bit update when handling hash fault When we converted the asm routines to C functions, we missed updating HPTE_R_R based on _PAGE_ACCESSED. ASM code used to copy over the lower bits from pte via. andi. r3,r30,0x1fe /* Get basic set of flags */ We also update the code such that we won't update the Change bit ('C' bit) always. This was added by commit c5cf0e30bf3d8 ("powerpc: Fix buglet with MMU hash management"). With hash64, we need to make sure that hardware doesn't do a pte update directly. This is because we do end up with entries in TLB with no hash page table entry. This happens because when we find a hash bucket full, we "evict" a more/less random entry from it. When we do that we don't invalidate the TLB (hpte_remove) because we assume the old translation is still technically "valid". For more info look at commit 0608d692463("powerpc/mm: Always invalidate tlb on hpte invalidate and update"). Thus it's critical that valid hash PTEs always have reference bit set and writeable ones have change bit set. We do this by hashing a non-dirty linux PTE as read-only and always setting _PAGE_ACCESSED (and thus R) when hashing anything else in. Any attempt by Linux at clearing those bits also removes the corresponding hash entry. Commit 5cf0e30bf3d8 did that for 'C' bit by enabling 'C' bit always. We don't really need to do that because we never map a RW pte entry without setting 'C' bit. On READ fault on a RW pte entry, we still map it READ only, hence a store update in the page will still cause a hash pte fault. This patch reverts the part of commit c5cf0e30bf3d8 ("[PATCH] powerpc: Fix buglet with MMU hash management") and retain the updatepp part. - If we hit the updatepp path on native, the old code without that commit, would fail to set C bcause native_hpte_updatepp() was implemented to filter the same bits as H_PROTECT and not let C through thus we would "upgrade" a RO HPTE to RW without setting C thus causing the bug. So the real fix in that commit was the change to native_hpte_updatepp Fixes: 89ff725051d1 ("powerpc/mm: Convert __hash_page_64K to C") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-31 00:26:30 -06:00
/*
* 'R' and 'C' update notes:
* - Under pHyp or KVM, the updatepp path will not set C, thus it *will*
* create writeable HPTEs without C set, because the hcall H_PROTECT
* that we use in that case will not update C
* - The above is however not a problem, because we also don't do that
* fancy "no flush" variant of eviction and we use H_REMOVE which will
* do the right thing and thus we don't have the race I described earlier
*
* - Under bare metal, we do have the race, so we need R and C set
* - We make sure R is always set and never lost
* - C is _PAGE_DIRTY, and *should* always be set for a writeable mapping
*/
unsigned long htab_convert_pte_flags(unsigned long pteflags)
{
unsigned long rflags = 0;
/* _PAGE_EXEC -> NOEXEC */
if ((pteflags & _PAGE_EXEC) == 0)
rflags |= HPTE_R_N;
/*
* PPP bits:
* Linux uses slb key 0 for kernel and 1 for user.
* kernel RW areas are mapped with PPP=0b000
* User area is mapped with PPP=0b010 for read/write
* or PPP=0b011 for read-only (including writeable but clean pages).
*/
if (pteflags & _PAGE_PRIVILEGED) {
/*
* Kernel read only mapped with ppp bits 0b110
*/
if (!(pteflags & _PAGE_WRITE)) {
if (mmu_has_feature(MMU_FTR_KERNEL_RO))
rflags |= (HPTE_R_PP0 | 0x2);
else
rflags |= 0x3;
}
} else {
if (pteflags & _PAGE_RWX)
rflags |= 0x2;
if (!((pteflags & _PAGE_WRITE) && (pteflags & _PAGE_DIRTY)))
rflags |= 0x1;
}
/*
powerpc/mm/hash: Fix the reference bit update when handling hash fault When we converted the asm routines to C functions, we missed updating HPTE_R_R based on _PAGE_ACCESSED. ASM code used to copy over the lower bits from pte via. andi. r3,r30,0x1fe /* Get basic set of flags */ We also update the code such that we won't update the Change bit ('C' bit) always. This was added by commit c5cf0e30bf3d8 ("powerpc: Fix buglet with MMU hash management"). With hash64, we need to make sure that hardware doesn't do a pte update directly. This is because we do end up with entries in TLB with no hash page table entry. This happens because when we find a hash bucket full, we "evict" a more/less random entry from it. When we do that we don't invalidate the TLB (hpte_remove) because we assume the old translation is still technically "valid". For more info look at commit 0608d692463("powerpc/mm: Always invalidate tlb on hpte invalidate and update"). Thus it's critical that valid hash PTEs always have reference bit set and writeable ones have change bit set. We do this by hashing a non-dirty linux PTE as read-only and always setting _PAGE_ACCESSED (and thus R) when hashing anything else in. Any attempt by Linux at clearing those bits also removes the corresponding hash entry. Commit 5cf0e30bf3d8 did that for 'C' bit by enabling 'C' bit always. We don't really need to do that because we never map a RW pte entry without setting 'C' bit. On READ fault on a RW pte entry, we still map it READ only, hence a store update in the page will still cause a hash pte fault. This patch reverts the part of commit c5cf0e30bf3d8 ("[PATCH] powerpc: Fix buglet with MMU hash management") and retain the updatepp part. - If we hit the updatepp path on native, the old code without that commit, would fail to set C bcause native_hpte_updatepp() was implemented to filter the same bits as H_PROTECT and not let C through thus we would "upgrade" a RO HPTE to RW without setting C thus causing the bug. So the real fix in that commit was the change to native_hpte_updatepp Fixes: 89ff725051d1 ("powerpc/mm: Convert __hash_page_64K to C") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-31 00:26:30 -06:00
* We can't allow hardware to update hpte bits. Hence always
* set 'R' bit and set 'C' if it is a write fault
*/
rflags |= HPTE_R_R;
powerpc/mm/hash: Fix the reference bit update when handling hash fault When we converted the asm routines to C functions, we missed updating HPTE_R_R based on _PAGE_ACCESSED. ASM code used to copy over the lower bits from pte via. andi. r3,r30,0x1fe /* Get basic set of flags */ We also update the code such that we won't update the Change bit ('C' bit) always. This was added by commit c5cf0e30bf3d8 ("powerpc: Fix buglet with MMU hash management"). With hash64, we need to make sure that hardware doesn't do a pte update directly. This is because we do end up with entries in TLB with no hash page table entry. This happens because when we find a hash bucket full, we "evict" a more/less random entry from it. When we do that we don't invalidate the TLB (hpte_remove) because we assume the old translation is still technically "valid". For more info look at commit 0608d692463("powerpc/mm: Always invalidate tlb on hpte invalidate and update"). Thus it's critical that valid hash PTEs always have reference bit set and writeable ones have change bit set. We do this by hashing a non-dirty linux PTE as read-only and always setting _PAGE_ACCESSED (and thus R) when hashing anything else in. Any attempt by Linux at clearing those bits also removes the corresponding hash entry. Commit 5cf0e30bf3d8 did that for 'C' bit by enabling 'C' bit always. We don't really need to do that because we never map a RW pte entry without setting 'C' bit. On READ fault on a RW pte entry, we still map it READ only, hence a store update in the page will still cause a hash pte fault. This patch reverts the part of commit c5cf0e30bf3d8 ("[PATCH] powerpc: Fix buglet with MMU hash management") and retain the updatepp part. - If we hit the updatepp path on native, the old code without that commit, would fail to set C bcause native_hpte_updatepp() was implemented to filter the same bits as H_PROTECT and not let C through thus we would "upgrade" a RO HPTE to RW without setting C thus causing the bug. So the real fix in that commit was the change to native_hpte_updatepp Fixes: 89ff725051d1 ("powerpc/mm: Convert __hash_page_64K to C") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-31 00:26:30 -06:00
if (pteflags & _PAGE_DIRTY)
rflags |= HPTE_R_C;
/*
* Add in WIG bits
*/
if ((pteflags & _PAGE_CACHE_CTL) == _PAGE_TOLERANT)
rflags |= HPTE_R_I;
else if ((pteflags & _PAGE_CACHE_CTL) == _PAGE_NON_IDEMPOTENT)
rflags |= (HPTE_R_I | HPTE_R_G);
else if ((pteflags & _PAGE_CACHE_CTL) == _PAGE_SAO)
rflags |= (HPTE_R_W | HPTE_R_I | HPTE_R_M);
else
/*
* Add memory coherence if cache inhibited is not set
*/
rflags |= HPTE_R_M;
rflags |= pte_to_hpte_pkey_bits(pteflags);
return rflags;
}
int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
unsigned long pstart, unsigned long prot,
int psize, int ssize)
{
unsigned long vaddr, paddr;
unsigned int step, shift;
int ret = 0;
shift = mmu_psize_defs[psize].shift;
step = 1 << shift;
prot = htab_convert_pte_flags(prot);
DBG("htab_bolt_mapping(%lx..%lx -> %lx (%lx,%d,%d)\n",
vstart, vend, pstart, prot, psize, ssize);
for (vaddr = vstart, paddr = pstart; vaddr < vend;
vaddr += step, paddr += step) {
unsigned long hash, hpteg;
unsigned long vsid = get_kernel_vsid(vaddr, ssize);
unsigned long vpn = hpt_vpn(vaddr, vsid, ssize);
unsigned long tprot = prot;
/*
* If we hit a bad address return error.
*/
if (!vsid)
return -1;
/* Make kernel text executable */
2008-08-29 19:43:47 -06:00
if (overlaps_kernel_text(vaddr, vaddr + step))
tprot &= ~HPTE_R_N;
/* Make kvm guest trampolines executable */
if (overlaps_kvm_tmp(vaddr, vaddr + step))
tprot &= ~HPTE_R_N;
/*
* If relocatable, check if it overlaps interrupt vectors that
* are copied down to real 0. For relocatable kernel
* (e.g. kdump case) we copy interrupt vectors down to real
* address 0. Mark that region as executable. This is
* because on p8 system with relocation on exception feature
* enabled, exceptions are raised with MMU (IR=DR=1) ON. Hence
* in order to execute the interrupt handlers in virtual
* mode the vector region need to be marked as executable.
*/
if ((PHYSICAL_START > MEMORY_START) &&
overlaps_interrupt_vector_text(vaddr, vaddr + step))
tprot &= ~HPTE_R_N;
hash = hpt_hash(vpn, shift, ssize);
hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
BUG_ON(!mmu_hash_ops.hpte_insert);
ret = mmu_hash_ops.hpte_insert(hpteg, vpn, paddr, tprot,
HPTE_V_BOLTED, psize, psize,
ssize);
if (ret < 0)
break;
#ifdef CONFIG_DEBUG_PAGEALLOC
if (debug_pagealloc_enabled() &&
(paddr >> PAGE_SHIFT) < linear_map_hash_count)
linear_map_hash_slots[paddr >> PAGE_SHIFT] = ret | 0x80;
#endif /* CONFIG_DEBUG_PAGEALLOC */
}
return ret < 0 ? ret : 0;
}
int htab_remove_mapping(unsigned long vstart, unsigned long vend,
int psize, int ssize)
{
unsigned long vaddr;
unsigned int step, shift;
int rc;
int ret = 0;
shift = mmu_psize_defs[psize].shift;
step = 1 << shift;
if (!mmu_hash_ops.hpte_removebolted)
return -ENODEV;
for (vaddr = vstart; vaddr < vend; vaddr += step) {
rc = mmu_hash_ops.hpte_removebolted(vaddr, psize, ssize);
if (rc == -ENOENT) {
ret = -ENOENT;
continue;
}
if (rc < 0)
return rc;
}
return ret;
}
static bool disable_1tb_segments = false;
static int __init parse_disable_1tb_segments(char *p)
{
disable_1tb_segments = true;
return 0;
}
early_param("disable_1tb_segments", parse_disable_1tb_segments);
static int __init htab_dt_scan_seg_sizes(unsigned long node,
const char *uname, int depth,
void *data)
{
const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
const __be32 *prop;
int size = 0;
/* We are scanning "cpu" nodes only */
if (type == NULL || strcmp(type, "cpu") != 0)
return 0;
prop = of_get_flat_dt_prop(node, "ibm,processor-segment-sizes", &size);
if (prop == NULL)
return 0;
for (; size >= 4; size -= 4, ++prop) {
if (be32_to_cpu(prop[0]) == 40) {
DBG("1T segment support detected\n");
if (disable_1tb_segments) {
DBG("1T segments disabled by command line\n");
break;
}
cur_cpu_spec->mmu_features |= MMU_FTR_1T_SEGMENT;
return 1;
}
}
cur_cpu_spec->mmu_features &= ~MMU_FTR_NO_SLBIE_B;
return 0;
}
static int __init get_idx_from_shift(unsigned int shift)
{
int idx = -1;
switch (shift) {
case 0xc:
idx = MMU_PAGE_4K;
break;
case 0x10:
idx = MMU_PAGE_64K;
break;
case 0x14:
idx = MMU_PAGE_1M;
break;
case 0x18:
idx = MMU_PAGE_16M;
break;
case 0x22:
idx = MMU_PAGE_16G;
break;
}
return idx;
}
static int __init htab_dt_scan_page_sizes(unsigned long node,
const char *uname, int depth,
void *data)
{
const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
const __be32 *prop;
int size = 0;
/* We are scanning "cpu" nodes only */
if (type == NULL || strcmp(type, "cpu") != 0)
return 0;
prop = of_get_flat_dt_prop(node, "ibm,segment-page-sizes", &size);
if (!prop)
return 0;
pr_info("Page sizes from device-tree:\n");
size /= 4;
cur_cpu_spec->mmu_features &= ~(MMU_FTR_16M_PAGE);
while(size > 0) {
unsigned int base_shift = be32_to_cpu(prop[0]);
unsigned int slbenc = be32_to_cpu(prop[1]);
unsigned int lpnum = be32_to_cpu(prop[2]);
struct mmu_psize_def *def;
int idx, base_idx;
size -= 3; prop += 3;
base_idx = get_idx_from_shift(base_shift);
if (base_idx < 0) {
/* skip the pte encoding also */
prop += lpnum * 2; size -= lpnum * 2;
continue;
}
def = &mmu_psize_defs[base_idx];
if (base_idx == MMU_PAGE_16M)
cur_cpu_spec->mmu_features |= MMU_FTR_16M_PAGE;
def->shift = base_shift;
if (base_shift <= 23)
def->avpnm = 0;
else
def->avpnm = (1 << (base_shift - 23)) - 1;
def->sllp = slbenc;
/*
* We don't know for sure what's up with tlbiel, so
* for now we only set it for 4K and 64K pages
*/
if (base_idx == MMU_PAGE_4K || base_idx == MMU_PAGE_64K)
def->tlbiel = 1;
else
def->tlbiel = 0;
while (size > 0 && lpnum) {
unsigned int shift = be32_to_cpu(prop[0]);
int penc = be32_to_cpu(prop[1]);
prop += 2; size -= 2;
lpnum--;
idx = get_idx_from_shift(shift);
if (idx < 0)
continue;
if (penc == -1)
pr_err("Invalid penc for base_shift=%d "
"shift=%d\n", base_shift, shift);
def->penc[idx] = penc;
pr_info("base_shift=%d: shift=%d, sllp=0x%04lx,"
" avpnm=0x%08lx, tlbiel=%d, penc=%d\n",
base_shift, shift, def->sllp,
def->avpnm, def->tlbiel, def->penc[idx]);
}
}
return 1;
}
#ifdef CONFIG_HUGETLB_PAGE
/* Scan for 16G memory blocks that have been set aside for huge pages
* and reserve those blocks for 16G huge pages.
*/
static int __init htab_dt_scan_hugepage_blocks(unsigned long node,
const char *uname, int depth,
void *data) {
const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
const __be64 *addr_prop;
const __be32 *page_count_prop;
unsigned int expected_pages;
long unsigned int phys_addr;
long unsigned int block_size;
/* We are scanning "memory" nodes only */
if (type == NULL || strcmp(type, "memory") != 0)
return 0;
/* This property is the log base 2 of the number of virtual pages that
* will represent this memory block. */
page_count_prop = of_get_flat_dt_prop(node, "ibm,expected#pages", NULL);
if (page_count_prop == NULL)
return 0;
expected_pages = (1 << be32_to_cpu(page_count_prop[0]));
addr_prop = of_get_flat_dt_prop(node, "reg", NULL);
if (addr_prop == NULL)
return 0;
phys_addr = be64_to_cpu(addr_prop[0]);
block_size = be64_to_cpu(addr_prop[1]);
if (block_size != (16 * GB))
return 0;
printk(KERN_INFO "Huge page(16GB) memory: "
"addr = 0x%lX size = 0x%lX pages = %d\n",
phys_addr, block_size, expected_pages);
if (phys_addr + block_size * expected_pages <= memblock_end_of_DRAM()) {
memblock_reserve(phys_addr, block_size * expected_pages);
pseries_add_gpage(phys_addr, block_size, expected_pages);
}
return 0;
}
#endif /* CONFIG_HUGETLB_PAGE */
static void mmu_psize_set_default_penc(void)
{
int bpsize, apsize;
for (bpsize = 0; bpsize < MMU_PAGE_COUNT; bpsize++)
for (apsize = 0; apsize < MMU_PAGE_COUNT; apsize++)
mmu_psize_defs[bpsize].penc[apsize] = -1;
}
#ifdef CONFIG_PPC_64K_PAGES
static bool might_have_hea(void)
{
/*
* The HEA ethernet adapter requires awareness of the
* GX bus. Without that awareness we can easily assume
* we will never see an HEA ethernet device.
*/
#ifdef CONFIG_IBMEBUS
return !cpu_has_feature(CPU_FTR_ARCH_207S) &&
firmware_has_feature(FW_FEATURE_SPLPAR);
#else
return false;
#endif
}
#endif /* #ifdef CONFIG_PPC_64K_PAGES */
static void __init htab_scan_page_sizes(void)
{
int rc;
/* se the invalid penc to -1 */
mmu_psize_set_default_penc();
/* Default to 4K pages only */
memcpy(mmu_psize_defs, mmu_psize_defaults,
sizeof(mmu_psize_defaults));
/*
* Try to find the available page sizes in the device-tree
*/
rc = of_scan_flat_dt(htab_dt_scan_page_sizes, NULL);
if (rc == 0 && early_mmu_has_feature(MMU_FTR_16M_PAGE)) {
/*
* Nothing in the device-tree, but the CPU supports 16M pages,
* so let's fallback on a known size list for 16M capable CPUs.
*/
memcpy(mmu_psize_defs, mmu_psize_defaults_gp,
sizeof(mmu_psize_defaults_gp));
}
#ifdef CONFIG_HUGETLB_PAGE
if (!hugetlb_disabled) {
/* Reserve 16G huge page memory sections for huge pages */
of_scan_flat_dt(htab_dt_scan_hugepage_blocks, NULL);
}
#endif /* CONFIG_HUGETLB_PAGE */
}
/*
* Fill in the hpte_page_sizes[] array.
* We go through the mmu_psize_defs[] array looking for all the
* supported base/actual page size combinations. Each combination
* has a unique pagesize encoding (penc) value in the low bits of
* the LP field of the HPTE. For actual page sizes less than 1MB,
* some of the upper LP bits are used for RPN bits, meaning that
* we need to fill in several entries in hpte_page_sizes[].
*
* In diagrammatic form, with r = RPN bits and z = page size bits:
* PTE LP actual page size
* rrrr rrrz >=8KB
* rrrr rrzz >=16KB
* rrrr rzzz >=32KB
* rrrr zzzz >=64KB
* ...
*
* The zzzz bits are implementation-specific but are chosen so that
* no encoding for a larger page size uses the same value in its
* low-order N bits as the encoding for the 2^(12+N) byte page size
* (if it exists).
*/
static void init_hpte_page_sizes(void)
{
long int ap, bp;
long int shift, penc;
for (bp = 0; bp < MMU_PAGE_COUNT; ++bp) {
if (!mmu_psize_defs[bp].shift)
continue; /* not a supported page size */
for (ap = bp; ap < MMU_PAGE_COUNT; ++ap) {
penc = mmu_psize_defs[bp].penc[ap];
if (penc == -1 || !mmu_psize_defs[ap].shift)
continue;
shift = mmu_psize_defs[ap].shift - LP_SHIFT;
if (shift <= 0)
continue; /* should never happen */
/*
* For page sizes less than 1MB, this loop
* replicates the entry for all possible values
* of the rrrr bits.
*/
while (penc < (1 << LP_BITS)) {
hpte_page_sizes[penc] = (ap << 4) | bp;
penc += 1 << shift;
}
}
}
}
static void __init htab_init_page_sizes(void)
{
init_hpte_page_sizes();
if (!debug_pagealloc_enabled()) {
/*
* Pick a size for the linear mapping. Currently, we only
* support 16M, 1M and 4K which is the default
*/
if (mmu_psize_defs[MMU_PAGE_16M].shift)
mmu_linear_psize = MMU_PAGE_16M;
else if (mmu_psize_defs[MMU_PAGE_1M].shift)
mmu_linear_psize = MMU_PAGE_1M;
}
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-14 18:45:18 -06:00
#ifdef CONFIG_PPC_64K_PAGES
/*
* Pick a size for the ordinary pages. Default is 4K, we support
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-14 18:45:18 -06:00
* 64K for user mappings and vmalloc if supported by the processor.
* We only use 64k for ioremap if the processor
* (and firmware) support cache-inhibited large pages.
* If not, we use 4k and set mmu_ci_restrictions so that
* hash_page knows to switch processes that use cache-inhibited
* mappings to 4k pages.
*/
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-14 18:45:18 -06:00
if (mmu_psize_defs[MMU_PAGE_64K].shift) {
mmu_virtual_psize = MMU_PAGE_64K;
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-14 18:45:18 -06:00
mmu_vmalloc_psize = MMU_PAGE_64K;
if (mmu_linear_psize == MMU_PAGE_4K)
mmu_linear_psize = MMU_PAGE_64K;
if (mmu_has_feature(MMU_FTR_CI_LARGE_PAGE)) {
/*
* When running on pSeries using 64k pages for ioremap
* would stop us accessing the HEA ethernet. So if we
* have the chance of ever seeing one, stay at 4k.
*/
if (!might_have_hea())
mmu_io_psize = MMU_PAGE_64K;
} else
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-14 18:45:18 -06:00
mmu_ci_restrictions = 1;
}
#endif /* CONFIG_PPC_64K_PAGES */
#ifdef CONFIG_SPARSEMEM_VMEMMAP
/* We try to use 16M pages for vmemmap if that is supported
* and we have at least 1G of RAM at boot
*/
if (mmu_psize_defs[MMU_PAGE_16M].shift &&
memblock_phys_mem_size() >= 0x40000000)
mmu_vmemmap_psize = MMU_PAGE_16M;
else if (mmu_psize_defs[MMU_PAGE_64K].shift)
mmu_vmemmap_psize = MMU_PAGE_64K;
else
mmu_vmemmap_psize = MMU_PAGE_4K;
#endif /* CONFIG_SPARSEMEM_VMEMMAP */
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-14 18:45:18 -06:00
printk(KERN_DEBUG "Page orders: linear mapping = %d, "
"virtual = %d, io = %d"
#ifdef CONFIG_SPARSEMEM_VMEMMAP
", vmemmap = %d"
#endif
"\n",
mmu_psize_defs[mmu_linear_psize].shift,
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-14 18:45:18 -06:00
mmu_psize_defs[mmu_virtual_psize].shift,
mmu_psize_defs[mmu_io_psize].shift
#ifdef CONFIG_SPARSEMEM_VMEMMAP
,mmu_psize_defs[mmu_vmemmap_psize].shift
#endif
);
}
static int __init htab_dt_scan_pftsize(unsigned long node,
const char *uname, int depth,
void *data)
{
const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
const __be32 *prop;
/* We are scanning "cpu" nodes only */
if (type == NULL || strcmp(type, "cpu") != 0)
return 0;
prop = of_get_flat_dt_prop(node, "ibm,pft-size", NULL);
if (prop != NULL) {
/* pft_size[0] is the NUMA CEC cookie */
ppc64_pft_size = be32_to_cpu(prop[1]);
return 1;
}
return 0;
}
unsigned htab_shift_for_mem_size(unsigned long mem_size)
{
unsigned memshift = __ilog2(mem_size);
unsigned pshift = mmu_psize_defs[mmu_virtual_psize].shift;
unsigned pteg_shift;
/* round mem_size up to next power of 2 */
if ((1UL << memshift) < mem_size)
memshift += 1;
/* aim for 2 pages / pteg */
pteg_shift = memshift - (pshift + 1);
/*
* 2^11 PTEGS of 128 bytes each, ie. 2^18 bytes is the minimum htab
* size permitted by the architecture.
*/
return max(pteg_shift + 7, 18U);
}
static unsigned long __init htab_get_table_size(void)
{
/* If hash size isn't already provided by the platform, we try to
* retrieve it from the device-tree. If it's not there neither, we
* calculate it now based on the total RAM size
*/
if (ppc64_pft_size == 0)
of_scan_flat_dt(htab_dt_scan_pftsize, NULL);
if (ppc64_pft_size)
return 1UL << ppc64_pft_size;
return 1UL << htab_shift_for_mem_size(memblock_phys_mem_size());
}
#ifdef CONFIG_MEMORY_HOTPLUG
void resize_hpt_for_hotplug(unsigned long new_mem_size)
{
unsigned target_hpt_shift;
if (!mmu_hash_ops.resize_hpt)
return;
target_hpt_shift = htab_shift_for_mem_size(new_mem_size);
/*
* To avoid lots of HPT resizes if memory size is fluctuating
* across a boundary, we deliberately have some hysterisis
* here: we immediately increase the HPT size if the target
* shift exceeds the current shift, but we won't attempt to
* reduce unless the target shift is at least 2 below the
* current shift
*/
if ((target_hpt_shift > ppc64_pft_size)
|| (target_hpt_shift < (ppc64_pft_size - 1))) {
int rc;
rc = mmu_hash_ops.resize_hpt(target_hpt_shift);
if (rc && (rc != -ENODEV))
printk(KERN_WARNING
"Unable to resize hash page table to target order %d: %d\n",
target_hpt_shift, rc);
}
}
int hash__create_section_mapping(unsigned long start, unsigned long end, int nid)
{
int rc = htab_bolt_mapping(start, end, __pa(start),
pgprot_val(PAGE_KERNEL), mmu_linear_psize,
mmu_kernel_ssize);
if (rc < 0) {
int rc2 = htab_remove_mapping(start, end, mmu_linear_psize,
mmu_kernel_ssize);
BUG_ON(rc2 && (rc2 != -ENOENT));
}
return rc;
}
int hash__remove_section_mapping(unsigned long start, unsigned long end)
{
int rc = htab_remove_mapping(start, end, mmu_linear_psize,
mmu_kernel_ssize);
WARN_ON(rc < 0);
return rc;
}
#endif /* CONFIG_MEMORY_HOTPLUG */
static void __init hash_init_partition_table(phys_addr_t hash_table,
unsigned long htab_size)
{
mmu_partition_table_init();
/*
* PS field (VRMA page size) is not used for LPID 0, hence set to 0.
* For now, UPRT is 0 and we have no segment table.
*/
htab_size = __ilog2(htab_size) - 18;
mmu_partition_table_set_entry(0, hash_table | htab_size, 0);
pr_info("Partition table %p\n", partition_tb);
}
static void __init htab_initialize(void)
{
unsigned long table;
unsigned long pteg_count;
unsigned long prot;
unsigned long base = 0, size = 0;
struct memblock_region *reg;
DBG(" -> htab_initialize()\n");
if (mmu_has_feature(MMU_FTR_1T_SEGMENT)) {
mmu_kernel_ssize = MMU_SEGSIZE_1T;
mmu_highuser_ssize = MMU_SEGSIZE_1T;
printk(KERN_INFO "Using 1TB segments\n");
}
/*
* Calculate the required size of the htab. We want the number of
* PTEGs to equal one half the number of real pages.
*/
htab_size_bytes = htab_get_table_size();
pteg_count = htab_size_bytes >> 7;
htab_hash_mask = pteg_count - 1;
if (firmware_has_feature(FW_FEATURE_LPAR) ||
firmware_has_feature(FW_FEATURE_PS3_LV1)) {
/* Using a hypervisor which owns the htab */
htab_address = NULL;
_SDR1 = 0;
/*
* On POWER9, we need to do a H_REGISTER_PROC_TBL hcall
* to inform the hypervisor that we wish to use the HPT.
*/
if (cpu_has_feature(CPU_FTR_ARCH_300))
register_process_table(0, 0, 0);
#ifdef CONFIG_FA_DUMP
/*
* If firmware assisted dump is active firmware preserves
* the contents of htab along with entire partition memory.
* Clear the htab if firmware assisted dump is active so
* that we dont end up using old mappings.
*/
if (is_fadump_active() && mmu_hash_ops.hpte_clear_all)
mmu_hash_ops.hpte_clear_all();
#endif
} else {
unsigned long limit = MEMBLOCK_ALLOC_ANYWHERE;
#ifdef CONFIG_PPC_CELL
/*
* Cell may require the hash table down low when using the
* Axon IOMMU in order to fit the dynamic region over it, see
* comments in cell/iommu.c
*/
if (fdt_subnode_offset(initial_boot_params, 0, "axon") > 0) {
limit = 0x80000000;
pr_info("Hash table forced below 2G for Axon IOMMU\n");
}
#endif /* CONFIG_PPC_CELL */
memblock: drop memblock_alloc_base() The memblock_alloc_base() function tries to allocate a memory up to the limit specified by its max_addr parameter and panics if the allocation fails. Replace its usage with memblock_phys_alloc_range() and make the callers check the return value and panic in case of error. Link: http://lkml.kernel.org/r/1548057848-15136-10-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 00:29:35 -06:00
table = memblock_phys_alloc_range(htab_size_bytes,
htab_size_bytes,
0, limit);
if (!table)
panic("ERROR: Failed to allocate %pa bytes below %pa\n",
&htab_size_bytes, &limit);
DBG("Hash table allocated at %lx, size: %lx\n", table,
htab_size_bytes);
htab_address = __va(table);
/* htab absolute addr + encoded htabsize */
_SDR1 = table + __ilog2(htab_size_bytes) - 18;
/* Initialize the HPT with no entries */
memset((void *)table, 0, htab_size_bytes);
if (!cpu_has_feature(CPU_FTR_ARCH_300))
/* Set SDR1 */
mtspr(SPRN_SDR1, _SDR1);
else
hash_init_partition_table(table, htab_size_bytes);
}
prot = pgprot_val(PAGE_KERNEL);
#ifdef CONFIG_DEBUG_PAGEALLOC
if (debug_pagealloc_enabled()) {
linear_map_hash_count = memblock_end_of_DRAM() >> PAGE_SHIFT;
powerpc: prefer memblock APIs returning virtual address Patch series "memblock: simplify several early memory allocation", v4. These patches simplify some of the early memory allocations by replacing usage of older memblock APIs with newer and shinier ones. Quite a few places in the arch/ code allocated memory using a memblock API that returns a physical address of the allocated area, then converted this physical address to a virtual one and then used memset(0) to clear the allocated range. More recent memblock APIs do all the three steps in one call and their usage simplifies the code. It's important to note that regardless of API used, the core allocation is nearly identical for any set of memblock allocators: first it tries to find a free memory with all the constraints specified by the caller and then falls back to the allocation with some or all constraints disabled. The first three patches perform the conversion of call sites that have exact requirements for the node and the possible memory range. The fourth patch is a bit one-off as it simplifies openrisc's implementation of pte_alloc_one_kernel(), and not only the memblock usage. The fifth patch takes care of simpler cases when the allocation can be satisfied with a simple call to memblock_alloc(). The sixth patch removes one-liner wrappers for memblock_alloc on arm and unicore32, as suggested by Christoph. This patch (of 6): There are a several places that allocate memory using memblock APIs that return a physical address, convert the returned address to the virtual address and frequently also memset(0) the allocated range. Update these places to use memblock allocators already returning a virtual address. Use memblock functions that clear the allocated memory instead of calling memset(0) where appropriate. The calls to memblock_alloc_base() that were not followed by memset(0) are replaced with memblock_alloc_try_nid_raw(). Since the latter does not panic() when the allocation fails, the appropriate panic() calls are added to the call sites. Link: http://lkml.kernel.org/r/1546248566-14910-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Greentime Hu <green.hu@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Mark Salter <msalter@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 17:30:48 -07:00
linear_map_hash_slots = memblock_alloc_try_nid(
linear_map_hash_count, 1, MEMBLOCK_LOW_LIMIT,
ppc64_rma_size, NUMA_NO_NODE);
treewide: add checks for the return value of memblock_alloc*() Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 00:30:31 -06:00
if (!linear_map_hash_slots)
panic("%s: Failed to allocate %lu bytes max_addr=%pa\n",
__func__, linear_map_hash_count, &ppc64_rma_size);
}
#endif /* CONFIG_DEBUG_PAGEALLOC */
/* create bolted the linear mapping in the hash table */
for_each_memblock(memory, reg) {
base = (unsigned long)__va(reg->base);
size = reg->size;
DBG("creating mapping for region: %lx..%lx (prot: %lx)\n",
base, size, prot);
BUG_ON(htab_bolt_mapping(base, base + size, __pa(base),
prot, mmu_linear_psize, mmu_kernel_ssize));
}
memblock_set_current_limit(MEMBLOCK_ALLOC_ANYWHERE);
/*
* If we have a memory_limit and we've allocated TCEs then we need to
* explicitly map the TCE area at the top of RAM. We also cope with the
* case that the TCEs start below memory_limit.
* tce_alloc_start/end are 16MB aligned so the mapping should work
* for either 4K or 16MB pages.
*/
if (tce_alloc_start) {
tce_alloc_start = (unsigned long)__va(tce_alloc_start);
tce_alloc_end = (unsigned long)__va(tce_alloc_end);
if (base + size >= tce_alloc_start)
tce_alloc_start = base + size + 1;
BUG_ON(htab_bolt_mapping(tce_alloc_start, tce_alloc_end,
__pa(tce_alloc_start), prot,
mmu_linear_psize, mmu_kernel_ssize));
}
DBG(" <- htab_initialize()\n");
}
#undef KB
#undef MB
void __init hash__early_init_devtree(void)
{
/* Initialize segment sizes */
of_scan_flat_dt(htab_dt_scan_seg_sizes, NULL);
/* Initialize page sizes */
htab_scan_page_sizes();
}
void __init hash__early_init_mmu(void)
{
powerpc: Free up four 64K PTE bits in 4K backed HPTE pages Rearrange 64K PTE bits to free up bits 3, 4, 5 and 6, in the 4K backed HPTE pages.These bits continue to be used for 64K backed HPTE pages in this patch, but will be freed up in the next patch. The bit numbers are big-endian as defined in the ISA3.0 The patch does the following change to the 4k HTPE backed 64K PTE's format. H_PAGE_BUSY moves from bit 3 to bit 9 (B bit in the figure below) V0 which occupied bit 4 is not used anymore. V1 which occupied bit 5 is not used anymore. V2 which occupied bit 6 is not used anymore. V3 which occupied bit 7 is not used anymore. Before the patch, the 4k backed 64k PTE format was as follows 0 1 2 3 4 5 6 7 8 9 10...........................63 : : : : : : : : : : : : v v v v v v v v v v v v ,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-, |x|x|x|B|V0|V1|V2|V3|x| | |x|x|................|x|x|x|x| <- primary pte '_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_' |S|G|I|X|S |G |I |X |S|G|I|X|..................|S|G|I|X| <- secondary pte '_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_' After the patch, the 4k backed 64k PTE format is as follows 0 1 2 3 4 5 6 7 8 9 10...........................63 : : : : : : : : : : : : v v v v v v v v v v v v ,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-, |x|x|x| | | | | |x|B| |x|x|................|.|.|.|.| <- primary pte '_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_' |S|G|I|X|S |G |I |X |S|G|I|X|..................|S|G|I|X| <- secondary pte '_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_' the four bits S,G,I,X (one quadruplet per 4k HPTE) that cache the hash-bucket slot value, is initialized to 1,1,1,1 indicating -- an invalid slot. If a HPTE gets cached in a 1111 slot(i.e 7th slot of secondary hash bucket), it is released immediately. In other words, even though 1111 is a valid slot value in the hash bucket, we consider it invalid and release the slot and the HPTE. This gives us the opportunity to determine the validity of S,G,I,X bits based on its contents and not on any of the bits V0,V1,V2 or V3 in the primary PTE When we release a HPTE cached in the 1111 slot we also release a legitimate slot in the primary hash bucket and unmap its corresponding HPTE. This is to ensure that we do get a HPTE cached in a slot of the primary hash bucket, the next time we retry. Though treating 1111 slot as invalid, reduces the number of available slots in the hash bucket and may have an effect on the performance, the probabilty of hitting a 1111 slot is extermely low. Compared to the current scheme, the above scheme reduces the number of false hash table updates significantly and has the added advantage of releasing four valuable PTE bits for other purpose. NOTE:even though bits 3, 4, 5, 6, 7 are not used when the 64K PTE is backed by 4k HPTE, they continue to be used if the PTE gets backed by 64k HPTE. The next patch will decouple that aswell, and truely release the bits. This idea was jointly developed by Paul Mackerras, Aneesh, Michael Ellermen and myself. 4K PTE format remains unchanged currently. The patch does the following code changes a) PTE flags are split between 64k and 4k header files. b) __hash_page_4K() is reimplemented to reflect the above logic. Acked-by: Balbir Singh <bsingharora@gmail.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 01:50:47 -07:00
#ifndef CONFIG_PPC_64K_PAGES
/*
powerpc: Free up four 64K PTE bits in 4K backed HPTE pages Rearrange 64K PTE bits to free up bits 3, 4, 5 and 6, in the 4K backed HPTE pages.These bits continue to be used for 64K backed HPTE pages in this patch, but will be freed up in the next patch. The bit numbers are big-endian as defined in the ISA3.0 The patch does the following change to the 4k HTPE backed 64K PTE's format. H_PAGE_BUSY moves from bit 3 to bit 9 (B bit in the figure below) V0 which occupied bit 4 is not used anymore. V1 which occupied bit 5 is not used anymore. V2 which occupied bit 6 is not used anymore. V3 which occupied bit 7 is not used anymore. Before the patch, the 4k backed 64k PTE format was as follows 0 1 2 3 4 5 6 7 8 9 10...........................63 : : : : : : : : : : : : v v v v v v v v v v v v ,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-, |x|x|x|B|V0|V1|V2|V3|x| | |x|x|................|x|x|x|x| <- primary pte '_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_' |S|G|I|X|S |G |I |X |S|G|I|X|..................|S|G|I|X| <- secondary pte '_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_' After the patch, the 4k backed 64k PTE format is as follows 0 1 2 3 4 5 6 7 8 9 10...........................63 : : : : : : : : : : : : v v v v v v v v v v v v ,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-, |x|x|x| | | | | |x|B| |x|x|................|.|.|.|.| <- primary pte '_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_' |S|G|I|X|S |G |I |X |S|G|I|X|..................|S|G|I|X| <- secondary pte '_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_' the four bits S,G,I,X (one quadruplet per 4k HPTE) that cache the hash-bucket slot value, is initialized to 1,1,1,1 indicating -- an invalid slot. If a HPTE gets cached in a 1111 slot(i.e 7th slot of secondary hash bucket), it is released immediately. In other words, even though 1111 is a valid slot value in the hash bucket, we consider it invalid and release the slot and the HPTE. This gives us the opportunity to determine the validity of S,G,I,X bits based on its contents and not on any of the bits V0,V1,V2 or V3 in the primary PTE When we release a HPTE cached in the 1111 slot we also release a legitimate slot in the primary hash bucket and unmap its corresponding HPTE. This is to ensure that we do get a HPTE cached in a slot of the primary hash bucket, the next time we retry. Though treating 1111 slot as invalid, reduces the number of available slots in the hash bucket and may have an effect on the performance, the probabilty of hitting a 1111 slot is extermely low. Compared to the current scheme, the above scheme reduces the number of false hash table updates significantly and has the added advantage of releasing four valuable PTE bits for other purpose. NOTE:even though bits 3, 4, 5, 6, 7 are not used when the 64K PTE is backed by 4k HPTE, they continue to be used if the PTE gets backed by 64k HPTE. The next patch will decouple that aswell, and truely release the bits. This idea was jointly developed by Paul Mackerras, Aneesh, Michael Ellermen and myself. 4K PTE format remains unchanged currently. The patch does the following code changes a) PTE flags are split between 64k and 4k header files. b) __hash_page_4K() is reimplemented to reflect the above logic. Acked-by: Balbir Singh <bsingharora@gmail.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 01:50:47 -07:00
* We have code in __hash_page_4K() and elsewhere, which assumes it can
* do the following:
* new_pte |= (slot << H_PAGE_F_GIX_SHIFT) & (H_PAGE_F_SECOND | H_PAGE_F_GIX);
*
* Where the slot number is between 0-15, and values of 8-15 indicate
* the secondary bucket. For that code to work H_PAGE_F_SECOND and
* H_PAGE_F_GIX must occupy four contiguous bits in the PTE, and
* H_PAGE_F_SECOND must be placed above H_PAGE_F_GIX. Assert that here
* with a BUILD_BUG_ON().
*/
BUILD_BUG_ON(H_PAGE_F_SECOND != (1ul << (H_PAGE_F_GIX_SHIFT + 3)));
powerpc: Free up four 64K PTE bits in 4K backed HPTE pages Rearrange 64K PTE bits to free up bits 3, 4, 5 and 6, in the 4K backed HPTE pages.These bits continue to be used for 64K backed HPTE pages in this patch, but will be freed up in the next patch. The bit numbers are big-endian as defined in the ISA3.0 The patch does the following change to the 4k HTPE backed 64K PTE's format. H_PAGE_BUSY moves from bit 3 to bit 9 (B bit in the figure below) V0 which occupied bit 4 is not used anymore. V1 which occupied bit 5 is not used anymore. V2 which occupied bit 6 is not used anymore. V3 which occupied bit 7 is not used anymore. Before the patch, the 4k backed 64k PTE format was as follows 0 1 2 3 4 5 6 7 8 9 10...........................63 : : : : : : : : : : : : v v v v v v v v v v v v ,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-, |x|x|x|B|V0|V1|V2|V3|x| | |x|x|................|x|x|x|x| <- primary pte '_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_' |S|G|I|X|S |G |I |X |S|G|I|X|..................|S|G|I|X| <- secondary pte '_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_' After the patch, the 4k backed 64k PTE format is as follows 0 1 2 3 4 5 6 7 8 9 10...........................63 : : : : : : : : : : : : v v v v v v v v v v v v ,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-, |x|x|x| | | | | |x|B| |x|x|................|.|.|.|.| <- primary pte '_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_' |S|G|I|X|S |G |I |X |S|G|I|X|..................|S|G|I|X| <- secondary pte '_'_'_'_'__'__'__'__'_'_'_'_'__________________'_'_'_'_' the four bits S,G,I,X (one quadruplet per 4k HPTE) that cache the hash-bucket slot value, is initialized to 1,1,1,1 indicating -- an invalid slot. If a HPTE gets cached in a 1111 slot(i.e 7th slot of secondary hash bucket), it is released immediately. In other words, even though 1111 is a valid slot value in the hash bucket, we consider it invalid and release the slot and the HPTE. This gives us the opportunity to determine the validity of S,G,I,X bits based on its contents and not on any of the bits V0,V1,V2 or V3 in the primary PTE When we release a HPTE cached in the 1111 slot we also release a legitimate slot in the primary hash bucket and unmap its corresponding HPTE. This is to ensure that we do get a HPTE cached in a slot of the primary hash bucket, the next time we retry. Though treating 1111 slot as invalid, reduces the number of available slots in the hash bucket and may have an effect on the performance, the probabilty of hitting a 1111 slot is extermely low. Compared to the current scheme, the above scheme reduces the number of false hash table updates significantly and has the added advantage of releasing four valuable PTE bits for other purpose. NOTE:even though bits 3, 4, 5, 6, 7 are not used when the 64K PTE is backed by 4k HPTE, they continue to be used if the PTE gets backed by 64k HPTE. The next patch will decouple that aswell, and truely release the bits. This idea was jointly developed by Paul Mackerras, Aneesh, Michael Ellermen and myself. 4K PTE format remains unchanged currently. The patch does the following code changes a) PTE flags are split between 64k and 4k header files. b) __hash_page_4K() is reimplemented to reflect the above logic. Acked-by: Balbir Singh <bsingharora@gmail.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06 01:50:47 -07:00
#endif /* CONFIG_PPC_64K_PAGES */
htab_init_page_sizes();
/*
* initialize page table size
*/
__pte_frag_nr = H_PTE_FRAG_NR;
__pte_frag_size_shift = H_PTE_FRAG_SIZE_SHIFT;
__pmd_frag_nr = H_PMD_FRAG_NR;
__pmd_frag_size_shift = H_PMD_FRAG_SIZE_SHIFT;
__pte_index_size = H_PTE_INDEX_SIZE;
__pmd_index_size = H_PMD_INDEX_SIZE;
__pud_index_size = H_PUD_INDEX_SIZE;
__pgd_index_size = H_PGD_INDEX_SIZE;
__pud_cache_index = H_PUD_CACHE_INDEX;
__pte_table_size = H_PTE_TABLE_SIZE;
__pmd_table_size = H_PMD_TABLE_SIZE;
__pud_table_size = H_PUD_TABLE_SIZE;
__pgd_table_size = H_PGD_TABLE_SIZE;
/*
* 4k use hugepd format, so for hash set then to
* zero
*/
__pmd_val_bits = HASH_PMD_VAL_BITS;
__pud_val_bits = HASH_PUD_VAL_BITS;
__pgd_val_bits = HASH_PGD_VAL_BITS;
__kernel_virt_start = H_KERN_VIRT_START;
__kernel_virt_size = H_KERN_VIRT_SIZE;
__vmalloc_start = H_VMALLOC_START;
__vmalloc_end = H_VMALLOC_END;
__kernel_io_start = H_KERN_IO_START;
vmemmap = (struct page *)H_VMEMMAP_BASE;
ioremap_bot = IOREMAP_BASE;
#ifdef CONFIG_PCI
pci_io_base = ISA_IO_BASE;
#endif
/* Select appropriate backend */
if (firmware_has_feature(FW_FEATURE_PS3_LV1))
ps3_early_mm_init();
else if (firmware_has_feature(FW_FEATURE_LPAR))
hpte_init_pseries();
else if (IS_ENABLED(CONFIG_PPC_NATIVE))
hpte_init_native();
if (!mmu_hash_ops.hpte_insert)
panic("hash__early_init_mmu: No MMU hash ops defined!\n");
/* Initialize the MMU Hash table and create the linear mapping
* of memory. Has to be done before SLB initialization as this is
* currently where the page size encoding is obtained.
*/
htab_initialize();
pr_info("Initializing hash mmu with SLB\n");
/* Initialize SLB management */
slb_initialize();
powerpc/64s: Improve local TLB flush for boot and MCE on POWER9 There are several cases outside the normal address space management where a CPU's entire local TLB is to be flushed: 1. Booting the kernel, in case something has left stale entries in the TLB (e.g., kexec). 2. Machine check, to clean corrupted TLB entries. One other place where the TLB is flushed, is waking from deep idle states. The flush is a side-effect of calling ->cpu_restore with the intention of re-setting various SPRs. The flush itself is unnecessary because in the first case, the TLB should not acquire new corrupted TLB entries as part of sleep/wake (though they may be lost). This type of TLB flush is coded inflexibly, several times for each CPU type, and they have a number of problems with ISA v3.0B: - The current radix mode of the MMU is not taken into account, it is always done as a hash flushn For IS=2 (LPID-matching flush from host) and IS=3 with HV=0 (guest kernel flush), tlbie(l) is undefined if the R field does not match the current radix mode. - ISA v3.0B hash must flush the partition and process table caches as well. - ISA v3.0B radix must flush partition and process scoped translations, partition and process table caches, and also the page walk cache. So consolidate the flushing code and implement it in C and inline asm under the mm/ directory with the rest of the flush code. Add ISA v3.0B cases for radix and hash, and use the radix flush in radix environment. Provide a way for IS=2 (LPID flush) to specify the radix mode of the partition. Have KVM pass in the radix mode of the guest. Take out the flushes from early cputable/dt_cpu_ftrs detection hooks, and move it later in the boot process after, the MMU registers are set up and before relocation is first turned on. The TLB flush is no longer called when restoring from deep idle states. This was not be done as a separate step because booting secondaries uses the same cpu_restore as idle restore, which needs the TLB flush. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-23 08:15:50 -07:00
if (cpu_has_feature(CPU_FTR_ARCH_206)
&& cpu_has_feature(CPU_FTR_HVMODE))
tlbiel_all();
}
#ifdef CONFIG_SMP
void hash__early_init_mmu_secondary(void)
{
/* Initialize hash table for that CPU */
if (!firmware_has_feature(FW_FEATURE_LPAR)) {
if (!cpu_has_feature(CPU_FTR_ARCH_300))
mtspr(SPRN_SDR1, _SDR1);
else
mtspr(SPRN_PTCR,
__pa(partition_tb) | (PATB_SIZE_SHIFT - 12));
}
/* Initialize SLB */
slb_initialize();
powerpc/64s: Improve local TLB flush for boot and MCE on POWER9 There are several cases outside the normal address space management where a CPU's entire local TLB is to be flushed: 1. Booting the kernel, in case something has left stale entries in the TLB (e.g., kexec). 2. Machine check, to clean corrupted TLB entries. One other place where the TLB is flushed, is waking from deep idle states. The flush is a side-effect of calling ->cpu_restore with the intention of re-setting various SPRs. The flush itself is unnecessary because in the first case, the TLB should not acquire new corrupted TLB entries as part of sleep/wake (though they may be lost). This type of TLB flush is coded inflexibly, several times for each CPU type, and they have a number of problems with ISA v3.0B: - The current radix mode of the MMU is not taken into account, it is always done as a hash flushn For IS=2 (LPID-matching flush from host) and IS=3 with HV=0 (guest kernel flush), tlbie(l) is undefined if the R field does not match the current radix mode. - ISA v3.0B hash must flush the partition and process table caches as well. - ISA v3.0B radix must flush partition and process scoped translations, partition and process table caches, and also the page walk cache. So consolidate the flushing code and implement it in C and inline asm under the mm/ directory with the rest of the flush code. Add ISA v3.0B cases for radix and hash, and use the radix flush in radix environment. Provide a way for IS=2 (LPID flush) to specify the radix mode of the partition. Have KVM pass in the radix mode of the guest. Take out the flushes from early cputable/dt_cpu_ftrs detection hooks, and move it later in the boot process after, the MMU registers are set up and before relocation is first turned on. The TLB flush is no longer called when restoring from deep idle states. This was not be done as a separate step because booting secondaries uses the same cpu_restore as idle restore, which needs the TLB flush. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-23 08:15:50 -07:00
if (cpu_has_feature(CPU_FTR_ARCH_206)
&& cpu_has_feature(CPU_FTR_HVMODE))
tlbiel_all();
}
#endif /* CONFIG_SMP */
/*
* Called by asm hashtable.S for doing lazy icache flush
*/
unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap)
{
struct page *page;
if (!pfn_valid(pte_pfn(pte)))
return pp;
page = pte_page(pte);
/* page is dirty */
if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) {
if (trap == 0x400) {
flush_dcache_icache_page(page);
set_bit(PG_arch_1, &page->flags);
} else
pp |= HPTE_R_N;
}
return pp;
}
#ifdef CONFIG_PPC_MM_SLICES
static unsigned int get_paca_psize(unsigned long addr)
{
unsigned char *psizes;
unsigned long index, mask_index;
if (addr < SLICE_LOW_TOP) {
psizes = get_paca()->mm_ctx_low_slices_psize;
index = GET_LOW_SLICE_INDEX(addr);
} else {
psizes = get_paca()->mm_ctx_high_slices_psize;
index = GET_HIGH_SLICE_INDEX(addr);
}
mask_index = index & 0x1;
return (psizes[index >> 1] >> (mask_index * 4)) & 0xF;
}
#else
unsigned int get_paca_psize(unsigned long addr)
{
return get_paca()->mm_ctx_user_psize;
}
#endif
[POWERPC] Allow drivers to map individual 4k pages to userspace Some drivers have resources that they want to be able to map into userspace that are 4k in size. On a kernel configured with 64k pages we currently end up mapping the 4k we want plus another 60k of physical address space, which could contain anything. This can introduce security problems, for example in the case of an infiniband adaptor where the other 60k could contain registers that some other program is using for its communications. This patch adds a new function, remap_4k_pfn, which drivers can use to map a single 4k page to userspace regardless of whether the kernel is using a 4k or a 64k page size. Like remap_pfn_range, it would typically be called in a driver's mmap function. It only maps a single 4k page, which on a 64k page kernel appears replicated 16 times throughout a 64k page. On a 4k page kernel it reduces to a call to remap_pfn_range. The way this works on a 64k kernel is that a new bit, _PAGE_4K_PFN, gets set on the linux PTE. This alters the way that __hash_page_4K computes the real address to put in the HPTE. The RPN field of the linux PTE becomes the 4k RPN directly rather than being interpreted as a 64k RPN. Since the RPN field is 32 bits, this means that physical addresses being mapped with remap_4k_pfn have to be below 2^44, i.e. 0x100000000000. The patch also factors out the code in arch/powerpc/mm/hash_utils_64.c that deals with demoting a process to use 4k pages into one function that gets called in the various different places where we need to do that. There were some discrepancies between exactly what was done in the various places, such as a call to spu_flush_all_slbs in one case but not in others. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-03 05:24:02 -06:00
/*
* Demote a segment to using 4k pages.
* For now this makes the whole process use 4k pages.
*/
#ifdef CONFIG_PPC_64K_PAGES
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 14:35:13 -07:00
void demote_segment_4k(struct mm_struct *mm, unsigned long addr)
{
if (get_slice_psize(mm, addr) == MMU_PAGE_4K)
[POWERPC] Allow drivers to map individual 4k pages to userspace Some drivers have resources that they want to be able to map into userspace that are 4k in size. On a kernel configured with 64k pages we currently end up mapping the 4k we want plus another 60k of physical address space, which could contain anything. This can introduce security problems, for example in the case of an infiniband adaptor where the other 60k could contain registers that some other program is using for its communications. This patch adds a new function, remap_4k_pfn, which drivers can use to map a single 4k page to userspace regardless of whether the kernel is using a 4k or a 64k page size. Like remap_pfn_range, it would typically be called in a driver's mmap function. It only maps a single 4k page, which on a 64k page kernel appears replicated 16 times throughout a 64k page. On a 4k page kernel it reduces to a call to remap_pfn_range. The way this works on a 64k kernel is that a new bit, _PAGE_4K_PFN, gets set on the linux PTE. This alters the way that __hash_page_4K computes the real address to put in the HPTE. The RPN field of the linux PTE becomes the 4k RPN directly rather than being interpreted as a 64k RPN. Since the RPN field is 32 bits, this means that physical addresses being mapped with remap_4k_pfn have to be below 2^44, i.e. 0x100000000000. The patch also factors out the code in arch/powerpc/mm/hash_utils_64.c that deals with demoting a process to use 4k pages into one function that gets called in the various different places where we need to do that. There were some discrepancies between exactly what was done in the various places, such as a call to spu_flush_all_slbs in one case but not in others. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-03 05:24:02 -06:00
return;
slice_set_range_psize(mm, addr, 1, MMU_PAGE_4K);
copro_flush_all_slbs(mm);
if ((get_paca_psize(addr) != MMU_PAGE_4K) && (current->mm == mm)) {
copy_mm_to_paca(mm);
slb_flush_and_restore_bolted();
}
[POWERPC] Allow drivers to map individual 4k pages to userspace Some drivers have resources that they want to be able to map into userspace that are 4k in size. On a kernel configured with 64k pages we currently end up mapping the 4k we want plus another 60k of physical address space, which could contain anything. This can introduce security problems, for example in the case of an infiniband adaptor where the other 60k could contain registers that some other program is using for its communications. This patch adds a new function, remap_4k_pfn, which drivers can use to map a single 4k page to userspace regardless of whether the kernel is using a 4k or a 64k page size. Like remap_pfn_range, it would typically be called in a driver's mmap function. It only maps a single 4k page, which on a 64k page kernel appears replicated 16 times throughout a 64k page. On a 4k page kernel it reduces to a call to remap_pfn_range. The way this works on a 64k kernel is that a new bit, _PAGE_4K_PFN, gets set on the linux PTE. This alters the way that __hash_page_4K computes the real address to put in the HPTE. The RPN field of the linux PTE becomes the 4k RPN directly rather than being interpreted as a 64k RPN. Since the RPN field is 32 bits, this means that physical addresses being mapped with remap_4k_pfn have to be below 2^44, i.e. 0x100000000000. The patch also factors out the code in arch/powerpc/mm/hash_utils_64.c that deals with demoting a process to use 4k pages into one function that gets called in the various different places where we need to do that. There were some discrepancies between exactly what was done in the various places, such as a call to spu_flush_all_slbs in one case but not in others. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-03 05:24:02 -06:00
}
#endif /* CONFIG_PPC_64K_PAGES */
[POWERPC] Allow drivers to map individual 4k pages to userspace Some drivers have resources that they want to be able to map into userspace that are 4k in size. On a kernel configured with 64k pages we currently end up mapping the 4k we want plus another 60k of physical address space, which could contain anything. This can introduce security problems, for example in the case of an infiniband adaptor where the other 60k could contain registers that some other program is using for its communications. This patch adds a new function, remap_4k_pfn, which drivers can use to map a single 4k page to userspace regardless of whether the kernel is using a 4k or a 64k page size. Like remap_pfn_range, it would typically be called in a driver's mmap function. It only maps a single 4k page, which on a 64k page kernel appears replicated 16 times throughout a 64k page. On a 4k page kernel it reduces to a call to remap_pfn_range. The way this works on a 64k kernel is that a new bit, _PAGE_4K_PFN, gets set on the linux PTE. This alters the way that __hash_page_4K computes the real address to put in the HPTE. The RPN field of the linux PTE becomes the 4k RPN directly rather than being interpreted as a 64k RPN. Since the RPN field is 32 bits, this means that physical addresses being mapped with remap_4k_pfn have to be below 2^44, i.e. 0x100000000000. The patch also factors out the code in arch/powerpc/mm/hash_utils_64.c that deals with demoting a process to use 4k pages into one function that gets called in the various different places where we need to do that. There were some discrepancies between exactly what was done in the various places, such as a call to spu_flush_all_slbs in one case but not in others. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-03 05:24:02 -06:00
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 14:35:13 -07:00
#ifdef CONFIG_PPC_SUBPAGE_PROT
/*
* This looks up a 2-bit protection code for a 4k subpage of a 64k page.
* Userspace sets the subpage permissions using the subpage_prot system call.
*
* Result is 0: full permissions, _PAGE_RW: read-only,
* _PAGE_RWX: no access.
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 14:35:13 -07:00
*/
static int subpage_protection(struct mm_struct *mm, unsigned long ea)
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 14:35:13 -07:00
{
struct subpage_prot_table *spt = &mm->context.spt;
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 14:35:13 -07:00
u32 spp = 0;
u32 **sbpm, *sbpp;
if (ea >= spt->maxaddr)
return 0;
if (ea < 0x100000000UL) {
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 14:35:13 -07:00
/* addresses below 4GB use spt->low_prot */
sbpm = spt->low_prot;
} else {
sbpm = spt->protptrs[ea >> SBP_L3_SHIFT];
if (!sbpm)
return 0;
}
sbpp = sbpm[(ea >> SBP_L2_SHIFT) & (SBP_L2_COUNT - 1)];
if (!sbpp)
return 0;
spp = sbpp[(ea >> PAGE_SHIFT) & (SBP_L1_COUNT - 1)];
/* extract 2-bit bitfield for this 4k subpage */
spp >>= 30 - 2 * ((ea >> 12) & 0xf);
/*
* 0 -> full premission
* 1 -> Read only
* 2 -> no access.
* We return the flag that need to be cleared.
*/
spp = ((spp & 2) ? _PAGE_RWX : 0) | ((spp & 1) ? _PAGE_WRITE : 0);
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 14:35:13 -07:00
return spp;
}
#else /* CONFIG_PPC_SUBPAGE_PROT */
static inline int subpage_protection(struct mm_struct *mm, unsigned long ea)
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 14:35:13 -07:00
{
return 0;
}
#endif
void hash_failure_debug(unsigned long ea, unsigned long access,
unsigned long vsid, unsigned long trap,
int ssize, int psize, int lpsize, unsigned long pte)
{
if (!printk_ratelimit())
return;
pr_info("mm: Hashing failure ! EA=0x%lx access=0x%lx current=%s\n",
ea, access, current->comm);
pr_info(" trap=0x%lx vsid=0x%lx ssize=%d base psize=%d psize %d pte=0x%lx\n",
trap, vsid, ssize, psize, lpsize, pte);
}
static void check_paca_psize(unsigned long ea, struct mm_struct *mm,
int psize, bool user_region)
{
if (user_region) {
if (psize != get_paca_psize(ea)) {
copy_mm_to_paca(mm);
slb_flush_and_restore_bolted();
}
} else if (get_paca()->vmalloc_sllp !=
mmu_psize_defs[mmu_vmalloc_psize].sllp) {
get_paca()->vmalloc_sllp =
mmu_psize_defs[mmu_vmalloc_psize].sllp;
slb_vmalloc_update();
}
}
/* Result code is:
* 0 - handled
* 1 - normal page fault
* -1 - critical hash insertion error
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 14:35:13 -07:00
* -2 - access not permitted by subpage protection mechanism
*/
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
int hash_page_mm(struct mm_struct *mm, unsigned long ea,
unsigned long access, unsigned long trap,
unsigned long flags)
{
bool is_thp;
enum ctx_state prev_state = exception_enter();
pgd_t *pgdir;
unsigned long vsid;
pte_t *ptep;
powerpc/mm: Allow more flexible layouts for hugepage pagetables Currently each available hugepage size uses a slightly different pagetable layout: that is, the bottem level table of pointers to hugepages is a different size, and may branch off from the normal page tables at a different level. Every hugepage aware path that needs to walk the pagetables must therefore look up the hugepage size from the slice info first, and work out the correct way to walk the pagetables accordingly. Future hardware is likely to add more possible hugepage sizes, more layout options and more mess. This patch, therefore reworks the handling of hugepage pagetables to reduce this complexity. In the new scheme, instead of having to consult the slice mask, pagetable walking code can check a flag in the PGD/PUD/PMD entries to see where to branch off to hugepage pagetables, and the entry also contains the information (eseentially hugepage shift) necessary to then interpret that table without recourse to the slice mask. This scheme can be extended neatly to handle multiple levels of self-describing "special" hugepage pagetables, although for now we assume only one level exists. This approach means that only the pagetable allocation path needs to know how the pagetables should be set out. All other (hugepage) pagetable walking paths can just interpret the structure as they go. There already was a flag bit in PGD/PUD/PMD entries for hugepage directory pointers, but it was only used for debug. We alter that flag bit to instead be a 0 in the MSB to indicate a hugepage pagetable pointer (normally it would be 1 since the pointer lies in the linear mapping). This means that asm pagetable walking can test for (and punt on) hugepage pointers with the same test that checks for unpopulated page directory entries (beq becomes bge), since hugepage pointers will always be positive, and normal pointers always negative. While we're at it, we get rid of the confusing (and grep defeating) #defining of hugepte_shift to be the same thing as mmu_huge_psizes. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-26 13:24:31 -06:00
unsigned hugeshift;
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
int rc, user_region = 0;
int psize, ssize;
DBG_LOW("hash_page(ea=%016lx, access=%lx, trap=%lx\n",
ea, access, trap);
powerpc/mm: Add trace point for tracking hash pte fault This enables us to understand how many hash fault we are taking when running benchmarks. For ex: -bash-4.2# ./perf stat -e powerpc:hash_fault -e page-faults /tmp/ebizzy.ppc64 -S 30 -P -n 1000 ... Performance counter stats for '/tmp/ebizzy.ppc64 -S 30 -P -n 1000': 1,10,04,075 powerpc:hash_fault 1,10,03,429 page-faults 30.865978991 seconds time elapsed NOTE: The impact of the tracepoint was not noticeable when running test. It was within the run-time variance of the test. For ex: without-patch: -------------- Performance counter stats for './a.out 3000 300': 643 page-faults # 0.089 M/sec 7.236562 task-clock (msec) # 0.928 CPUs utilized 2,179,213 stalled-cycles-frontend # 0.00% frontend cycles idle 17,174,367 stalled-cycles-backend # 0.00% backend cycles idle 0 context-switches # 0.000 K/sec 0.007794658 seconds time elapsed And with-patch: --------------- Performance counter stats for './a.out 3000 300': 643 page-faults # 0.089 M/sec 7.233746 task-clock (msec) # 0.921 CPUs utilized 0 context-switches # 0.000 K/sec 0.007854876 seconds time elapsed Performance counter stats for './a.out 3000 300': 643 page-faults # 0.087 M/sec 649 powerpc:hash_fault # 0.087 M/sec 7.430376 task-clock (msec) # 0.938 CPUs utilized 2,347,174 stalled-cycles-frontend # 0.00% frontend cycles idle 17,524,282 stalled-cycles-backend # 0.00% backend cycles idle 0 context-switches # 0.000 K/sec 0.007920284 seconds time elapsed Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-14 01:35:57 -06:00
trace_hash_fault(ea, access, trap);
/* Get region & vsid */
switch (REGION_ID(ea)) {
case USER_REGION_ID:
user_region = 1;
if (! mm) {
DBG_LOW(" user region with no mm !\n");
rc = 1;
goto bail;
}
psize = get_slice_psize(mm, ea);
ssize = user_segment_size(ea);
vsid = get_user_vsid(&mm->context, ea, ssize);
break;
case VMALLOC_REGION_ID:
vsid = get_kernel_vsid(ea, mmu_kernel_ssize);
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-14 18:45:18 -06:00
if (ea < VMALLOC_END)
psize = mmu_vmalloc_psize;
else
psize = mmu_io_psize;
ssize = mmu_kernel_ssize;
break;
default:
/* Not a valid range
* Send the problem up to do_page_fault
*/
rc = 1;
goto bail;
}
DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid);
/* Bad address. */
if (!vsid) {
DBG_LOW("Bad address!\n");
rc = 1;
goto bail;
}
/* Get pgdir */
pgdir = mm->pgd;
if (pgdir == NULL) {
rc = 1;
goto bail;
}
/* Check CPU locality */
if (user_region && mm_is_thread_local(mm))
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
flags |= HPTE_LOCAL_UPDATE;
#ifndef CONFIG_PPC_64K_PAGES
powerpc/mm: Allow more flexible layouts for hugepage pagetables Currently each available hugepage size uses a slightly different pagetable layout: that is, the bottem level table of pointers to hugepages is a different size, and may branch off from the normal page tables at a different level. Every hugepage aware path that needs to walk the pagetables must therefore look up the hugepage size from the slice info first, and work out the correct way to walk the pagetables accordingly. Future hardware is likely to add more possible hugepage sizes, more layout options and more mess. This patch, therefore reworks the handling of hugepage pagetables to reduce this complexity. In the new scheme, instead of having to consult the slice mask, pagetable walking code can check a flag in the PGD/PUD/PMD entries to see where to branch off to hugepage pagetables, and the entry also contains the information (eseentially hugepage shift) necessary to then interpret that table without recourse to the slice mask. This scheme can be extended neatly to handle multiple levels of self-describing "special" hugepage pagetables, although for now we assume only one level exists. This approach means that only the pagetable allocation path needs to know how the pagetables should be set out. All other (hugepage) pagetable walking paths can just interpret the structure as they go. There already was a flag bit in PGD/PUD/PMD entries for hugepage directory pointers, but it was only used for debug. We alter that flag bit to instead be a 0 in the MSB to indicate a hugepage pagetable pointer (normally it would be 1 since the pointer lies in the linear mapping). This means that asm pagetable walking can test for (and punt on) hugepage pointers with the same test that checks for unpopulated page directory entries (beq becomes bge), since hugepage pointers will always be positive, and normal pointers always negative. While we're at it, we get rid of the confusing (and grep defeating) #defining of hugepte_shift to be the same thing as mmu_huge_psizes. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-26 13:24:31 -06:00
/* If we use 4K pages and our psize is not 4K, then we might
* be hitting a special driver mapping, and need to align the
* address before we fetch the PTE.
*
* It could also be a hugepage mapping, in which case this is
* not necessary, but it's not harmful, either.
*/
if (psize != MMU_PAGE_4K)
ea &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
#endif /* CONFIG_PPC_64K_PAGES */
/* Get PTE and page size from page tables */
ptep = find_linux_pte(pgdir, ea, &is_thp, &hugeshift);
if (ptep == NULL || !pte_present(*ptep)) {
DBG_LOW(" no PTE !\n");
rc = 1;
goto bail;
}
/* Add _PAGE_PRESENT to the required access perm */
access |= _PAGE_PRESENT;
/* Pre-check access permissions (will be re-checked atomically
* in __hash_page_XX but this pre-check is a fast path
*/
if (!check_pte_access(access, pte_val(*ptep))) {
DBG_LOW(" no access !\n");
rc = 1;
goto bail;
}
if (hugeshift) {
if (is_thp)
rc = __hash_page_thp(ea, access, vsid, (pmd_t *)ptep,
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
trap, flags, ssize, psize);
#ifdef CONFIG_HUGETLB_PAGE
else
rc = __hash_page_huge(ea, access, vsid, ptep, trap,
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
flags, ssize, hugeshift, psize);
#else
else {
/*
* if we have hugeshift, and is not transhuge with
* hugetlb disabled, something is really wrong.
*/
rc = 1;
WARN_ON(1);
}
#endif
if (current->mm == mm)
check_paca_psize(ea, mm, psize, user_region);
goto bail;
}
powerpc/mm: Allow more flexible layouts for hugepage pagetables Currently each available hugepage size uses a slightly different pagetable layout: that is, the bottem level table of pointers to hugepages is a different size, and may branch off from the normal page tables at a different level. Every hugepage aware path that needs to walk the pagetables must therefore look up the hugepage size from the slice info first, and work out the correct way to walk the pagetables accordingly. Future hardware is likely to add more possible hugepage sizes, more layout options and more mess. This patch, therefore reworks the handling of hugepage pagetables to reduce this complexity. In the new scheme, instead of having to consult the slice mask, pagetable walking code can check a flag in the PGD/PUD/PMD entries to see where to branch off to hugepage pagetables, and the entry also contains the information (eseentially hugepage shift) necessary to then interpret that table without recourse to the slice mask. This scheme can be extended neatly to handle multiple levels of self-describing "special" hugepage pagetables, although for now we assume only one level exists. This approach means that only the pagetable allocation path needs to know how the pagetables should be set out. All other (hugepage) pagetable walking paths can just interpret the structure as they go. There already was a flag bit in PGD/PUD/PMD entries for hugepage directory pointers, but it was only used for debug. We alter that flag bit to instead be a 0 in the MSB to indicate a hugepage pagetable pointer (normally it would be 1 since the pointer lies in the linear mapping). This means that asm pagetable walking can test for (and punt on) hugepage pointers with the same test that checks for unpopulated page directory entries (beq becomes bge), since hugepage pointers will always be positive, and normal pointers always negative. While we're at it, we get rid of the confusing (and grep defeating) #defining of hugepte_shift to be the same thing as mmu_huge_psizes. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-26 13:24:31 -06:00
#ifndef CONFIG_PPC_64K_PAGES
DBG_LOW(" i-pte: %016lx\n", pte_val(*ptep));
#else
DBG_LOW(" i-pte: %016lx %016lx\n", pte_val(*ptep),
pte_val(*(ptep + PTRS_PER_PTE)));
#endif
/* Do actual hashing */
#ifdef CONFIG_PPC_64K_PAGES
/* If H_PAGE_4K_PFN is set, make sure this is a 4k segment */
if ((pte_val(*ptep) & H_PAGE_4K_PFN) && psize == MMU_PAGE_64K) {
[POWERPC] Allow drivers to map individual 4k pages to userspace Some drivers have resources that they want to be able to map into userspace that are 4k in size. On a kernel configured with 64k pages we currently end up mapping the 4k we want plus another 60k of physical address space, which could contain anything. This can introduce security problems, for example in the case of an infiniband adaptor where the other 60k could contain registers that some other program is using for its communications. This patch adds a new function, remap_4k_pfn, which drivers can use to map a single 4k page to userspace regardless of whether the kernel is using a 4k or a 64k page size. Like remap_pfn_range, it would typically be called in a driver's mmap function. It only maps a single 4k page, which on a 64k page kernel appears replicated 16 times throughout a 64k page. On a 4k page kernel it reduces to a call to remap_pfn_range. The way this works on a 64k kernel is that a new bit, _PAGE_4K_PFN, gets set on the linux PTE. This alters the way that __hash_page_4K computes the real address to put in the HPTE. The RPN field of the linux PTE becomes the 4k RPN directly rather than being interpreted as a 64k RPN. Since the RPN field is 32 bits, this means that physical addresses being mapped with remap_4k_pfn have to be below 2^44, i.e. 0x100000000000. The patch also factors out the code in arch/powerpc/mm/hash_utils_64.c that deals with demoting a process to use 4k pages into one function that gets called in the various different places where we need to do that. There were some discrepancies between exactly what was done in the various places, such as a call to spu_flush_all_slbs in one case but not in others. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-03 05:24:02 -06:00
demote_segment_4k(mm, ea);
psize = MMU_PAGE_4K;
}
/* If this PTE is non-cacheable and we have restrictions on
* using non cacheable large pages, then we switch to 4k
*/
if (mmu_ci_restrictions && psize == MMU_PAGE_64K && pte_ci(*ptep)) {
if (user_region) {
demote_segment_4k(mm, ea);
psize = MMU_PAGE_4K;
} else if (ea < VMALLOC_END) {
/*
* some driver did a non-cacheable mapping
* in vmalloc space, so switch vmalloc
* to 4k pages
*/
printk(KERN_ALERT "Reducing vmalloc segment "
"to 4kB pages because of "
"non-cacheable mapping\n");
psize = mmu_vmalloc_psize = MMU_PAGE_4K;
copro_flush_all_slbs(mm);
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-14 18:45:18 -06:00
}
}
powerpc/mm: Check paca psize is up to date for huge mappings We have a bug in our hugepage handling which exhibits as an infinite loop of hash faults. If the fault is being taken in the kernel it will typically trigger the softlockup detector, or the RCU stall detector. The bug is as follows: 1. mmap(0xa0000000, ..., MAP_FIXED | MAP_HUGE_TLB | MAP_ANONYMOUS ..) 2. Slice code converts the slice psize to 16M. 3. The code on lines 539-540 of slice.c in slice_get_unmapped_area() synchronises the mm->context with the paca->context. So the paca slice mask is updated to include the 16M slice. 3. Either: * mmap() fails because there are no huge pages available. * mmap() succeeds and the mapping is then munmapped. In both cases the slice psize remains at 16M in both the paca & mm. 4. mmap(0xa0000000, ..., MAP_FIXED | MAP_ANONYMOUS ..) 5. The slice psize is converted back to 64K. Because of the check on line 539 of slice.c we DO NOT update the paca->context. The paca slice mask is now out of sync with the mm slice mask. 6. User/kernel accesses 0xa0000000. 7. The SLB miss handler slb_allocate_realmode() **uses the paca slice mask** to create an SLB entry and inserts it in the SLB. 18. With the 16M SLB entry in place the hardware does a hash lookup, no entry is found so a data access exception is generated. 19. The data access handler calls do_page_fault() -> handle_mm_fault(). 10. __handle_mm_fault() creates a THP mapping with do_huge_pmd_anonymous_page(). 11. The hardware retries the access, there is still nothing in the hash table so once again a data access exception is generated. 12. hash_page() calls into __hash_page_thp() and inserts a mapping in the hash. Although the THP mapping maps 16M the hashing is done using 64K as the segment page size. 13. hash_page() returns immediately after calling __hash_page_thp(), skipping over the code at line 1125. Resulting in the mismatch between the paca->context and mm->context not being detected. 14. The hardware retries the access, the hash it generates using the 16M SLB entry does NOT match the hash we inserted. 15. We take another data access and go into __hash_page_thp(). 16. We see a valid entry in the hpte_slot_array and so we call updatepp() which succeeds. 17. Goto 14. We could fix this in two ways. The first would be to remove or modify the check on line 539 of slice.c. The second option is to cause the check of paca psize in hash_page() on line 1125 to also be done for THP pages. We prefer the latter, because the check & update of the paca psize is not done until we know it's necessary. It's also done only on the current cpu, so we don't need to IPI all other cpus. Without further rearranging the code, the simplest fix is to pull out the code that checks paca psize and call it in two places. Firstly for THP/hugetlb, and secondly for other mappings as before. Thanks to Dave Jones for trinity, which originally found this bug. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@vger.kernel.org [v3.11+]
2014-05-28 02:21:17 -06:00
#endif /* CONFIG_PPC_64K_PAGES */
if (current->mm == mm)
check_paca_psize(ea, mm, psize, user_region);
#ifdef CONFIG_PPC_64K_PAGES
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-14 18:45:18 -06:00
if (psize == MMU_PAGE_64K)
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
rc = __hash_page_64K(ea, access, vsid, ptep, trap,
flags, ssize);
else
#endif /* CONFIG_PPC_64K_PAGES */
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 14:35:13 -07:00
{
int spp = subpage_protection(mm, ea);
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 14:35:13 -07:00
if (access & spp)
rc = -2;
else
rc = __hash_page_4K(ea, access, vsid, ptep, trap,
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
flags, ssize, spp);
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 14:35:13 -07:00
}
/* Dump some info in case of hash insertion failure, they should
* never happen so it is really useful to know if/when they do
*/
if (rc == -1)
hash_failure_debug(ea, access, vsid, trap, ssize, psize,
psize, pte_val(*ptep));
#ifndef CONFIG_PPC_64K_PAGES
DBG_LOW(" o-pte: %016lx\n", pte_val(*ptep));
#else
DBG_LOW(" o-pte: %016lx %016lx\n", pte_val(*ptep),
pte_val(*(ptep + PTRS_PER_PTE)));
#endif
DBG_LOW(" -> rc=%d\n", rc);
bail:
exception_exit(prev_state);
return rc;
}
EXPORT_SYMBOL_GPL(hash_page_mm);
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
int hash_page(unsigned long ea, unsigned long access, unsigned long trap,
unsigned long dsisr)
{
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
unsigned long flags = 0;
struct mm_struct *mm = current->mm;
if (REGION_ID(ea) == VMALLOC_REGION_ID)
mm = &init_mm;
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
if (dsisr & DSISR_NOHPTE)
flags |= HPTE_NOHPTE_UPDATE;
return hash_page_mm(mm, ea, access, trap, flags);
}
EXPORT_SYMBOL_GPL(hash_page);
int __hash_page(unsigned long ea, unsigned long msr, unsigned long trap,
unsigned long dsisr)
{
unsigned long access = _PAGE_PRESENT | _PAGE_READ;
unsigned long flags = 0;
struct mm_struct *mm = current->mm;
if (REGION_ID(ea) == VMALLOC_REGION_ID)
mm = &init_mm;
if (dsisr & DSISR_NOHPTE)
flags |= HPTE_NOHPTE_UPDATE;
if (dsisr & DSISR_ISSTORE)
access |= _PAGE_WRITE;
/*
* We set _PAGE_PRIVILEGED only when
* kernel mode access kernel space.
*
* _PAGE_PRIVILEGED is NOT set
* 1) when kernel mode access user space
* 2) user space access kernel space.
*/
access |= _PAGE_PRIVILEGED;
if ((msr & MSR_PR) || (REGION_ID(ea) == USER_REGION_ID))
access &= ~_PAGE_PRIVILEGED;
if (trap == 0x400)
access |= _PAGE_EXEC;
return hash_page_mm(mm, ea, access, trap, flags);
}
#ifdef CONFIG_PPC_MM_SLICES
static bool should_hash_preload(struct mm_struct *mm, unsigned long ea)
{
int psize = get_slice_psize(mm, ea);
/* We only prefault standard pages for now */
if (unlikely(psize != mm->context.user_psize))
return false;
/*
* Don't prefault if subpage protection is enabled for the EA.
*/
if (unlikely((psize == MMU_PAGE_4K) && subpage_protection(mm, ea)))
return false;
return true;
}
#else
static bool should_hash_preload(struct mm_struct *mm, unsigned long ea)
{
return true;
}
#endif
void hash_preload(struct mm_struct *mm, unsigned long ea,
bool is_exec, unsigned long trap)
{
int hugepage_shift;
unsigned long vsid;
pgd_t *pgdir;
pte_t *ptep;
unsigned long flags;
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
int rc, ssize, update_flags = 0;
unsigned long access = _PAGE_PRESENT | _PAGE_READ | (is_exec ? _PAGE_EXEC : 0);
[POWERPC] Introduce address space "slices" The basic issue is to be able to do what hugetlbfs does but with different page sizes for some other special filesystems; more specifically, my need is: - Huge pages - SPE local store mappings using 64K pages on a 4K base page size kernel on Cell - Some special 4K segments in 64K-page kernels for mapping a dodgy type of powerpc-specific infiniband hardware that requires 4K MMU mappings for various reasons I won't explain here. The main issues are: - To maintain/keep track of the page size per "segment" (as we can only have one page size per segment on powerpc, which are 256MB divisions of the address space). - To make sure special mappings stay within their allotted "segments" (including MAP_FIXED crap) - To make sure everybody else doesn't mmap/brk/grow_stack into a "segment" that is used for a special mapping Some of the necessary mechanisms to handle that were present in the hugetlbfs code, but mostly in ways not suitable for anything else. The patch relies on some changes to the generic get_unmapped_area() that just got merged. It still hijacks hugetlb callbacks here or there as the generic code hasn't been entirely cleaned up yet but that shouldn't be a problem. So what is a slice ? Well, I re-used the mechanism used formerly by our hugetlbfs implementation which divides the address space in "meta-segments" which I called "slices". The division is done using 256MB slices below 4G, and 1T slices above. Thus the address space is divided currently into 16 "low" slices and 16 "high" slices. (Special case: high slice 0 is the area between 4G and 1T). Doing so simplifies significantly the tracking of segments and avoids having to keep track of all the 256MB segments in the address space. While I used the "concepts" of hugetlbfs, I mostly re-implemented everything in a more generic way and "ported" hugetlbfs to it. Slices can have an associated page size, which is encoded in the mmu context and used by the SLB miss handler to set the segment sizes. The hash code currently doesn't care, it has a specific check for hugepages, though I might add a mechanism to provide per-slice hash mapping functions in the future. The slice code provide a pair of "generic" get_unmapped_area() (bottomup and topdown) functions that should work with any slice size. There is some trickiness here so I would appreciate people to have a look at the implementation of these and let me know if I got something wrong. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 00:27:27 -06:00
BUG_ON(REGION_ID(ea) != USER_REGION_ID);
if (!should_hash_preload(mm, ea))
return;
DBG_LOW("hash_preload(mm=%p, mm->pgdir=%p, ea=%016lx, access=%lx,"
" trap=%lx\n", mm, mm->pgd, ea, access, trap);
/* Get Linux PTE if available */
pgdir = mm->pgd;
if (pgdir == NULL)
return;
powerpc: Make linux pagetable walk safe with THP enabled We need to have irqs disabled to handle all the possible parallel update for linux page table without holding locks. Events that we are intersted in while walking page tables are 1) Page fault 2) umap 3) THP split 4) THP collapse A) local_irq_disabled: ------------------------ 1) page fault: A none to valid transition via page fault is not an issue because we would either see a none or valid. If it is none, we would error out the page table walk. We may need to use on stack values when checking for type of page table elements, because if we do if (!is_hugepd()) { if (!pmd_none() { if (pmd_bad() { We could take that bad condition because the pmd got converted to a hugepd after the !is_hugepd check via a hugetlb fault. The right way would be to check for pmd_none higher up or use on stack value. 2) A valid to none conversion via unmap: We can safely walk the upper level table, because we don't remove the the page table entries until rcu grace period. So even if we followed a wrong pointer we still have the pointer valid till the grace period. A PTE pointer returned need to be atomically checked for _PAGE_PRESENT and _PAGE_BUSY. A valid pointer returned could becoming none later. To prevent pte_clear we take _PAGE_BUSY. 3) THP split: A valid transparent hugepage is converted to nomal page. Before we split we do pmd_splitting_flush, which sets the hugepage PTE to _PAGE_SPLITTING So when walking page table we need to check for pmd_trans_splitting and handle that. The pte returned should also need to be checked for _PAGE_SPLITTING before setting _PAGE_BUSY similar to _PAGE_PRESENT. We save the value of PTE on stack and check for the flag in the local pte value. If we don't have the value set we can safely operate on the local pte value and we atomicaly set _PAGE_BUSY. 4) THP collapse: A normal page gets converted to hugepage. In the collapse path, we mark the pmd none early (pmdp_clear_flush). With irq disabled, if we are aleady walking page table we would see the pmd_none and won't continue. If we see a valid PMD, we should still check for _PAGE_PRESENT before setting _PAGE_BUSY, to make sure we didn't collapse the PTE to a Huge PTE. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20 03:00:22 -06:00
/* Get VSID */
ssize = user_segment_size(ea);
vsid = get_user_vsid(&mm->context, ea, ssize);
powerpc: Make linux pagetable walk safe with THP enabled We need to have irqs disabled to handle all the possible parallel update for linux page table without holding locks. Events that we are intersted in while walking page tables are 1) Page fault 2) umap 3) THP split 4) THP collapse A) local_irq_disabled: ------------------------ 1) page fault: A none to valid transition via page fault is not an issue because we would either see a none or valid. If it is none, we would error out the page table walk. We may need to use on stack values when checking for type of page table elements, because if we do if (!is_hugepd()) { if (!pmd_none() { if (pmd_bad() { We could take that bad condition because the pmd got converted to a hugepd after the !is_hugepd check via a hugetlb fault. The right way would be to check for pmd_none higher up or use on stack value. 2) A valid to none conversion via unmap: We can safely walk the upper level table, because we don't remove the the page table entries until rcu grace period. So even if we followed a wrong pointer we still have the pointer valid till the grace period. A PTE pointer returned need to be atomically checked for _PAGE_PRESENT and _PAGE_BUSY. A valid pointer returned could becoming none later. To prevent pte_clear we take _PAGE_BUSY. 3) THP split: A valid transparent hugepage is converted to nomal page. Before we split we do pmd_splitting_flush, which sets the hugepage PTE to _PAGE_SPLITTING So when walking page table we need to check for pmd_trans_splitting and handle that. The pte returned should also need to be checked for _PAGE_SPLITTING before setting _PAGE_BUSY similar to _PAGE_PRESENT. We save the value of PTE on stack and check for the flag in the local pte value. If we don't have the value set we can safely operate on the local pte value and we atomicaly set _PAGE_BUSY. 4) THP collapse: A normal page gets converted to hugepage. In the collapse path, we mark the pmd none early (pmdp_clear_flush). With irq disabled, if we are aleady walking page table we would see the pmd_none and won't continue. If we see a valid PMD, we should still check for _PAGE_PRESENT before setting _PAGE_BUSY, to make sure we didn't collapse the PTE to a Huge PTE. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20 03:00:22 -06:00
if (!vsid)
return;
/*
* Hash doesn't like irqs. Walking linux page table with irq disabled
* saves us from holding multiple locks.
*/
local_irq_save(flags);
/*
* THP pages use update_mmu_cache_pmd. We don't do
* hash preload there. Hence can ignore THP here
*/
ptep = find_current_mm_pte(pgdir, ea, NULL, &hugepage_shift);
if (!ptep)
powerpc: Make linux pagetable walk safe with THP enabled We need to have irqs disabled to handle all the possible parallel update for linux page table without holding locks. Events that we are intersted in while walking page tables are 1) Page fault 2) umap 3) THP split 4) THP collapse A) local_irq_disabled: ------------------------ 1) page fault: A none to valid transition via page fault is not an issue because we would either see a none or valid. If it is none, we would error out the page table walk. We may need to use on stack values when checking for type of page table elements, because if we do if (!is_hugepd()) { if (!pmd_none() { if (pmd_bad() { We could take that bad condition because the pmd got converted to a hugepd after the !is_hugepd check via a hugetlb fault. The right way would be to check for pmd_none higher up or use on stack value. 2) A valid to none conversion via unmap: We can safely walk the upper level table, because we don't remove the the page table entries until rcu grace period. So even if we followed a wrong pointer we still have the pointer valid till the grace period. A PTE pointer returned need to be atomically checked for _PAGE_PRESENT and _PAGE_BUSY. A valid pointer returned could becoming none later. To prevent pte_clear we take _PAGE_BUSY. 3) THP split: A valid transparent hugepage is converted to nomal page. Before we split we do pmd_splitting_flush, which sets the hugepage PTE to _PAGE_SPLITTING So when walking page table we need to check for pmd_trans_splitting and handle that. The pte returned should also need to be checked for _PAGE_SPLITTING before setting _PAGE_BUSY similar to _PAGE_PRESENT. We save the value of PTE on stack and check for the flag in the local pte value. If we don't have the value set we can safely operate on the local pte value and we atomicaly set _PAGE_BUSY. 4) THP collapse: A normal page gets converted to hugepage. In the collapse path, we mark the pmd none early (pmdp_clear_flush). With irq disabled, if we are aleady walking page table we would see the pmd_none and won't continue. If we see a valid PMD, we should still check for _PAGE_PRESENT before setting _PAGE_BUSY, to make sure we didn't collapse the PTE to a Huge PTE. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20 03:00:22 -06:00
goto out_exit;
WARN_ON(hugepage_shift);
#ifdef CONFIG_PPC_64K_PAGES
/* If either H_PAGE_4K_PFN or cache inhibited is set (and we are on
* a 64K kernel), then we don't preload, hash_page() will take
* care of it once we actually try to access the page.
* That way we don't have to duplicate all of the logic for segment
* page size demotion here
*/
if ((pte_val(*ptep) & H_PAGE_4K_PFN) || pte_ci(*ptep))
powerpc: Make linux pagetable walk safe with THP enabled We need to have irqs disabled to handle all the possible parallel update for linux page table without holding locks. Events that we are intersted in while walking page tables are 1) Page fault 2) umap 3) THP split 4) THP collapse A) local_irq_disabled: ------------------------ 1) page fault: A none to valid transition via page fault is not an issue because we would either see a none or valid. If it is none, we would error out the page table walk. We may need to use on stack values when checking for type of page table elements, because if we do if (!is_hugepd()) { if (!pmd_none() { if (pmd_bad() { We could take that bad condition because the pmd got converted to a hugepd after the !is_hugepd check via a hugetlb fault. The right way would be to check for pmd_none higher up or use on stack value. 2) A valid to none conversion via unmap: We can safely walk the upper level table, because we don't remove the the page table entries until rcu grace period. So even if we followed a wrong pointer we still have the pointer valid till the grace period. A PTE pointer returned need to be atomically checked for _PAGE_PRESENT and _PAGE_BUSY. A valid pointer returned could becoming none later. To prevent pte_clear we take _PAGE_BUSY. 3) THP split: A valid transparent hugepage is converted to nomal page. Before we split we do pmd_splitting_flush, which sets the hugepage PTE to _PAGE_SPLITTING So when walking page table we need to check for pmd_trans_splitting and handle that. The pte returned should also need to be checked for _PAGE_SPLITTING before setting _PAGE_BUSY similar to _PAGE_PRESENT. We save the value of PTE on stack and check for the flag in the local pte value. If we don't have the value set we can safely operate on the local pte value and we atomicaly set _PAGE_BUSY. 4) THP collapse: A normal page gets converted to hugepage. In the collapse path, we mark the pmd none early (pmdp_clear_flush). With irq disabled, if we are aleady walking page table we would see the pmd_none and won't continue. If we see a valid PMD, we should still check for _PAGE_PRESENT before setting _PAGE_BUSY, to make sure we didn't collapse the PTE to a Huge PTE. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20 03:00:22 -06:00
goto out_exit;
#endif /* CONFIG_PPC_64K_PAGES */
/* Is that local to this CPU ? */
if (mm_is_thread_local(mm))
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
update_flags |= HPTE_LOCAL_UPDATE;
/* Hash it in */
#ifdef CONFIG_PPC_64K_PAGES
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-14 18:45:18 -06:00
if (mm->context.user_psize == MMU_PAGE_64K)
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
rc = __hash_page_64K(ea, access, vsid, ptep, trap,
update_flags, ssize);
else
#endif /* CONFIG_PPC_64K_PAGES */
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
rc = __hash_page_4K(ea, access, vsid, ptep, trap, update_flags,
ssize, subpage_protection(mm, ea));
/* Dump some info in case of hash insertion failure, they should
* never happen so it is really useful to know if/when they do
*/
if (rc == -1)
hash_failure_debug(ea, access, vsid, trap, ssize,
mm->context.user_psize,
mm->context.user_psize,
pte_val(*ptep));
powerpc: Make linux pagetable walk safe with THP enabled We need to have irqs disabled to handle all the possible parallel update for linux page table without holding locks. Events that we are intersted in while walking page tables are 1) Page fault 2) umap 3) THP split 4) THP collapse A) local_irq_disabled: ------------------------ 1) page fault: A none to valid transition via page fault is not an issue because we would either see a none or valid. If it is none, we would error out the page table walk. We may need to use on stack values when checking for type of page table elements, because if we do if (!is_hugepd()) { if (!pmd_none() { if (pmd_bad() { We could take that bad condition because the pmd got converted to a hugepd after the !is_hugepd check via a hugetlb fault. The right way would be to check for pmd_none higher up or use on stack value. 2) A valid to none conversion via unmap: We can safely walk the upper level table, because we don't remove the the page table entries until rcu grace period. So even if we followed a wrong pointer we still have the pointer valid till the grace period. A PTE pointer returned need to be atomically checked for _PAGE_PRESENT and _PAGE_BUSY. A valid pointer returned could becoming none later. To prevent pte_clear we take _PAGE_BUSY. 3) THP split: A valid transparent hugepage is converted to nomal page. Before we split we do pmd_splitting_flush, which sets the hugepage PTE to _PAGE_SPLITTING So when walking page table we need to check for pmd_trans_splitting and handle that. The pte returned should also need to be checked for _PAGE_SPLITTING before setting _PAGE_BUSY similar to _PAGE_PRESENT. We save the value of PTE on stack and check for the flag in the local pte value. If we don't have the value set we can safely operate on the local pte value and we atomicaly set _PAGE_BUSY. 4) THP collapse: A normal page gets converted to hugepage. In the collapse path, we mark the pmd none early (pmdp_clear_flush). With irq disabled, if we are aleady walking page table we would see the pmd_none and won't continue. If we see a valid PMD, we should still check for _PAGE_PRESENT before setting _PAGE_BUSY, to make sure we didn't collapse the PTE to a Huge PTE. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20 03:00:22 -06:00
out_exit:
local_irq_restore(flags);
}
#ifdef CONFIG_PPC_MEM_KEYS
/*
* Return the protection key associated with the given address and the
* mm_struct.
*/
u16 get_mm_addr_key(struct mm_struct *mm, unsigned long address)
{
pte_t *ptep;
u16 pkey = 0;
unsigned long flags;
if (!mm || !mm->pgd)
return 0;
local_irq_save(flags);
ptep = find_linux_pte(mm->pgd, address, NULL, NULL);
if (ptep)
pkey = pte_to_pkey_bits(pte_val(READ_ONCE(*ptep)));
local_irq_restore(flags);
return pkey;
}
#endif /* CONFIG_PPC_MEM_KEYS */
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
static inline void tm_flush_hash_page(int local)
{
/*
* Transactions are not aborted by tlbiel, only tlbie. Without, syncing a
* page back to a block device w/PIO could pick up transactional data
* (bad!) so we force an abort here. Before the sync the page will be
* made read-only, which will flush_hash_page. BIG ISSUE here: if the
* kernel uses a page from userspace without unmapping it first, it may
* see the speculated version.
*/
if (local && cpu_has_feature(CPU_FTR_TM) && current->thread.regs &&
MSR_TM_ACTIVE(current->thread.regs->msr)) {
tm_enable();
tm_abort(TM_CAUSE_TLBI);
}
}
#else
static inline void tm_flush_hash_page(int local)
{
}
#endif
/*
* Return the global hash slot, corresponding to the given PTE, which contains
* the HPTE.
*/
unsigned long pte_get_hash_gslot(unsigned long vpn, unsigned long shift,
int ssize, real_pte_t rpte, unsigned int subpg_index)
{
unsigned long hash, gslot, hidx;
hash = hpt_hash(vpn, shift, ssize);
hidx = __rpte_to_hidx(rpte, subpg_index);
if (hidx & _PTEIDX_SECONDARY)
hash = ~hash;
gslot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
gslot += hidx & _PTEIDX_GROUP_IX;
return gslot;
}
/* WARNING: This is called from hash_low_64.S, if you change this prototype,
* do not forget to update the assembly call site !
*/
void flush_hash_page(unsigned long vpn, real_pte_t pte, int psize, int ssize,
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
unsigned long flags)
{
unsigned long index, shift, gslot;
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
int local = flags & HPTE_LOCAL_UPDATE;
DBG_LOW("flush_hash_page(vpn=%016lx)\n", vpn);
pte_iterate_hashed_subpages(pte, psize, vpn, index, shift) {
gslot = pte_get_hash_gslot(vpn, shift, ssize, pte, index);
DBG_LOW(" sub %ld: gslot=%lx\n", index, gslot);
/*
* We use same base page size and actual psize, because we don't
* use these functions for hugepage
*/
mmu_hash_ops.hpte_invalidate(gslot, vpn, psize, psize,
ssize, local);
} pte_iterate_hashed_end();
tm_flush_hash_page(local);
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
void flush_hash_hugepage(unsigned long vsid, unsigned long addr,
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
pmd_t *pmdp, unsigned int psize, int ssize,
unsigned long flags)
{
int i, max_hpte_count, valid;
unsigned long s_addr;
unsigned char *hpte_slot_array;
unsigned long hidx, shift, vpn, hash, slot;
powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-03 22:30:14 -07:00
int local = flags & HPTE_LOCAL_UPDATE;
s_addr = addr & HPAGE_PMD_MASK;
hpte_slot_array = get_hpte_slot_array(pmdp);
/*
* IF we try to do a HUGE PTE update after a withdraw is done.
* we will find the below NULL. This happens when we do
* split_huge_page_pmd
*/
if (!hpte_slot_array)
return;
if (mmu_hash_ops.hugepage_invalidate) {
mmu_hash_ops.hugepage_invalidate(vsid, s_addr, hpte_slot_array,
psize, ssize, local);
goto tm_abort;
}
/*
* No bluk hpte removal support, invalidate each entry
*/
shift = mmu_psize_defs[psize].shift;
max_hpte_count = HPAGE_PMD_SIZE >> shift;
for (i = 0; i < max_hpte_count; i++) {
/*
* 8 bits per each hpte entries
* 000| [ secondary group (one bit) | hidx (3 bits) | valid bit]
*/
valid = hpte_valid(hpte_slot_array, i);
if (!valid)
continue;
hidx = hpte_hash_index(hpte_slot_array, i);
/* get the vpn */
addr = s_addr + (i * (1ul << shift));
vpn = hpt_vpn(addr, vsid, ssize);
hash = hpt_hash(vpn, shift, ssize);
if (hidx & _PTEIDX_SECONDARY)
hash = ~hash;
slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
slot += hidx & _PTEIDX_GROUP_IX;
mmu_hash_ops.hpte_invalidate(slot, vpn, psize,
MMU_PAGE_16M, ssize, local);
}
tm_abort:
tm_flush_hash_page(local);
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
void flush_hash_range(unsigned long number, int local)
{
if (mmu_hash_ops.flush_hash_range)
mmu_hash_ops.flush_hash_range(number, local);
else {
int i;
struct ppc64_tlb_batch *batch =
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-21 14:23:25 -06:00
this_cpu_ptr(&ppc64_tlb_batch);
for (i = 0; i < number; i++)
flush_hash_page(batch->vpn[i], batch->pte[i],
batch->psize, batch->ssize, local);
}
}
/*
* low_hash_fault is called when we the low level hash code failed
* to instert a PTE due to an hypervisor error
*/
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 14:35:13 -07:00
void low_hash_fault(struct pt_regs *regs, unsigned long address, int rc)
{
enum ctx_state prev_state = exception_enter();
if (user_mode(regs)) {
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 14:35:13 -07:00
#ifdef CONFIG_PPC_SUBPAGE_PROT
if (rc == -2)
_exception(SIGSEGV, regs, SEGV_ACCERR, address);
else
#endif
_exception(SIGBUS, regs, BUS_ADRERR, address);
} else
bad_page_fault(regs, address, SIGBUS);
exception_exit(prev_state);
}
long hpte_insert_repeating(unsigned long hash, unsigned long vpn,
unsigned long pa, unsigned long rflags,
unsigned long vflags, int psize, int ssize)
{
unsigned long hpte_group;
long slot;
repeat:
hpte_group = (hash & htab_hash_mask) * HPTES_PER_GROUP;
/* Insert into the hash table, primary slot */
slot = mmu_hash_ops.hpte_insert(hpte_group, vpn, pa, rflags, vflags,
psize, psize, ssize);
/* Primary is full, try the secondary */
if (unlikely(slot == -1)) {
hpte_group = (~hash & htab_hash_mask) * HPTES_PER_GROUP;
slot = mmu_hash_ops.hpte_insert(hpte_group, vpn, pa, rflags,
vflags | HPTE_V_SECONDARY,
psize, psize, ssize);
if (slot == -1) {
if (mftb() & 0x1)
hpte_group = (hash & htab_hash_mask) *
HPTES_PER_GROUP;
mmu_hash_ops.hpte_remove(hpte_group);
goto repeat;
}
}
return slot;
}
#ifdef CONFIG_DEBUG_PAGEALLOC
static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi)
{
powerpc: Try to insert the hptes repeatedly in kernel_map_linear_page() This patch fixes the following oops, which could be trigged by build the kernel with many concurrent threads, under CONFIG_DEBUG_PAGEALLOC. hpte_insert() might return -1, indicating that the bucket (primary here) is full. We are not necessarily reporting a BUG in this case. Instead, we could try repeatedly (try secondary, remove and try again) until we find a slot. [ 543.075675] ------------[ cut here ]------------ [ 543.075701] kernel BUG at arch/powerpc/mm/hash_utils_64.c:1239! [ 543.075714] Oops: Exception in kernel mode, sig: 5 [#1] [ 543.075722] PREEMPT SMP NR_CPUS=16 DEBUG_PAGEALLOC NUMA pSeries [ 543.075741] Modules linked in: binfmt_misc ehea [ 543.075759] NIP: c000000000036eb0 LR: c000000000036ea4 CTR: c00000000005a594 [ 543.075771] REGS: c0000000a90832c0 TRAP: 0700 Not tainted (3.8.0-next-20130222) [ 543.075781] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 22224482 XER: 00000000 [ 543.075816] SOFTE: 0 [ 543.075823] CFAR: c00000000004c200 [ 543.075830] TASK = c0000000e506b750[23934] 'cc1' THREAD: c0000000a9080000 CPU: 1 GPR00: 0000000000000001 c0000000a9083540 c000000000c600a8 ffffffffffffffff GPR04: 0000000000000050 fffffffffffffffa c0000000a90834e0 00000000004ff594 GPR08: 0000000000000001 0000000000000000 000000009592d4d8 c000000000c86854 GPR12: 0000000000000002 c000000006ead300 0000000000a51000 0000000000000001 GPR16: f000000003354380 ffffffffffffffff ffffffffffffff80 0000000000000000 GPR20: 0000000000000001 c000000000c600a8 0000000000000001 0000000000000001 GPR24: 0000000003354380 c000000000000000 0000000000000000 c000000000b65950 GPR28: 0000002000000000 00000000000cd50e 0000000000bf50d9 c000000000c7c230 [ 543.076005] NIP [c000000000036eb0] .kernel_map_pages+0x1e0/0x3f8 [ 543.076016] LR [c000000000036ea4] .kernel_map_pages+0x1d4/0x3f8 [ 543.076025] Call Trace: [ 543.076033] [c0000000a9083540] [c000000000036ea4] .kernel_map_pages+0x1d4/0x3f8 (unreliable) [ 543.076053] [c0000000a9083640] [c000000000167638] .get_page_from_freelist+0x6cc/0x8dc [ 543.076067] [c0000000a9083800] [c000000000167a48] .__alloc_pages_nodemask+0x200/0x96c [ 543.076082] [c0000000a90839c0] [c0000000001ade44] .alloc_pages_vma+0x160/0x1e4 [ 543.076098] [c0000000a9083a80] [c00000000018ce04] .handle_pte_fault+0x1b0/0x7e8 [ 543.076113] [c0000000a9083b50] [c00000000018d5a8] .handle_mm_fault+0x16c/0x1a0 [ 543.076129] [c0000000a9083c00] [c0000000007bf1dc] .do_page_fault+0x4d0/0x7a4 [ 543.076144] [c0000000a9083e30] [c0000000000090e8] handle_page_fault+0x10/0x30 [ 543.076155] Instruction dump: [ 543.076163] 7c630038 78631d88 e80a0000 f8410028 7c0903a6 e91f01de e96a0010 e84a0008 [ 543.076192] 4e800421 e8410028 7c7107b4 7a200fe0 <0b000000> 7f63db78 48785781 60000000 [ 543.076224] ---[ end trace bd5807e8d6ae186b ]--- Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2013-04-15 10:53:20 -06:00
unsigned long hash;
unsigned long vsid = get_kernel_vsid(vaddr, mmu_kernel_ssize);
unsigned long vpn = hpt_vpn(vaddr, vsid, mmu_kernel_ssize);
unsigned long mode = htab_convert_pte_flags(pgprot_val(PAGE_KERNEL));
powerpc: Try to insert the hptes repeatedly in kernel_map_linear_page() This patch fixes the following oops, which could be trigged by build the kernel with many concurrent threads, under CONFIG_DEBUG_PAGEALLOC. hpte_insert() might return -1, indicating that the bucket (primary here) is full. We are not necessarily reporting a BUG in this case. Instead, we could try repeatedly (try secondary, remove and try again) until we find a slot. [ 543.075675] ------------[ cut here ]------------ [ 543.075701] kernel BUG at arch/powerpc/mm/hash_utils_64.c:1239! [ 543.075714] Oops: Exception in kernel mode, sig: 5 [#1] [ 543.075722] PREEMPT SMP NR_CPUS=16 DEBUG_PAGEALLOC NUMA pSeries [ 543.075741] Modules linked in: binfmt_misc ehea [ 543.075759] NIP: c000000000036eb0 LR: c000000000036ea4 CTR: c00000000005a594 [ 543.075771] REGS: c0000000a90832c0 TRAP: 0700 Not tainted (3.8.0-next-20130222) [ 543.075781] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 22224482 XER: 00000000 [ 543.075816] SOFTE: 0 [ 543.075823] CFAR: c00000000004c200 [ 543.075830] TASK = c0000000e506b750[23934] 'cc1' THREAD: c0000000a9080000 CPU: 1 GPR00: 0000000000000001 c0000000a9083540 c000000000c600a8 ffffffffffffffff GPR04: 0000000000000050 fffffffffffffffa c0000000a90834e0 00000000004ff594 GPR08: 0000000000000001 0000000000000000 000000009592d4d8 c000000000c86854 GPR12: 0000000000000002 c000000006ead300 0000000000a51000 0000000000000001 GPR16: f000000003354380 ffffffffffffffff ffffffffffffff80 0000000000000000 GPR20: 0000000000000001 c000000000c600a8 0000000000000001 0000000000000001 GPR24: 0000000003354380 c000000000000000 0000000000000000 c000000000b65950 GPR28: 0000002000000000 00000000000cd50e 0000000000bf50d9 c000000000c7c230 [ 543.076005] NIP [c000000000036eb0] .kernel_map_pages+0x1e0/0x3f8 [ 543.076016] LR [c000000000036ea4] .kernel_map_pages+0x1d4/0x3f8 [ 543.076025] Call Trace: [ 543.076033] [c0000000a9083540] [c000000000036ea4] .kernel_map_pages+0x1d4/0x3f8 (unreliable) [ 543.076053] [c0000000a9083640] [c000000000167638] .get_page_from_freelist+0x6cc/0x8dc [ 543.076067] [c0000000a9083800] [c000000000167a48] .__alloc_pages_nodemask+0x200/0x96c [ 543.076082] [c0000000a90839c0] [c0000000001ade44] .alloc_pages_vma+0x160/0x1e4 [ 543.076098] [c0000000a9083a80] [c00000000018ce04] .handle_pte_fault+0x1b0/0x7e8 [ 543.076113] [c0000000a9083b50] [c00000000018d5a8] .handle_mm_fault+0x16c/0x1a0 [ 543.076129] [c0000000a9083c00] [c0000000007bf1dc] .do_page_fault+0x4d0/0x7a4 [ 543.076144] [c0000000a9083e30] [c0000000000090e8] handle_page_fault+0x10/0x30 [ 543.076155] Instruction dump: [ 543.076163] 7c630038 78631d88 e80a0000 f8410028 7c0903a6 e91f01de e96a0010 e84a0008 [ 543.076192] 4e800421 e8410028 7c7107b4 7a200fe0 <0b000000> 7f63db78 48785781 60000000 [ 543.076224] ---[ end trace bd5807e8d6ae186b ]--- Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2013-04-15 10:53:20 -06:00
long ret;
hash = hpt_hash(vpn, PAGE_SHIFT, mmu_kernel_ssize);
/* Don't create HPTE entries for bad address */
if (!vsid)
return;
powerpc: Try to insert the hptes repeatedly in kernel_map_linear_page() This patch fixes the following oops, which could be trigged by build the kernel with many concurrent threads, under CONFIG_DEBUG_PAGEALLOC. hpte_insert() might return -1, indicating that the bucket (primary here) is full. We are not necessarily reporting a BUG in this case. Instead, we could try repeatedly (try secondary, remove and try again) until we find a slot. [ 543.075675] ------------[ cut here ]------------ [ 543.075701] kernel BUG at arch/powerpc/mm/hash_utils_64.c:1239! [ 543.075714] Oops: Exception in kernel mode, sig: 5 [#1] [ 543.075722] PREEMPT SMP NR_CPUS=16 DEBUG_PAGEALLOC NUMA pSeries [ 543.075741] Modules linked in: binfmt_misc ehea [ 543.075759] NIP: c000000000036eb0 LR: c000000000036ea4 CTR: c00000000005a594 [ 543.075771] REGS: c0000000a90832c0 TRAP: 0700 Not tainted (3.8.0-next-20130222) [ 543.075781] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 22224482 XER: 00000000 [ 543.075816] SOFTE: 0 [ 543.075823] CFAR: c00000000004c200 [ 543.075830] TASK = c0000000e506b750[23934] 'cc1' THREAD: c0000000a9080000 CPU: 1 GPR00: 0000000000000001 c0000000a9083540 c000000000c600a8 ffffffffffffffff GPR04: 0000000000000050 fffffffffffffffa c0000000a90834e0 00000000004ff594 GPR08: 0000000000000001 0000000000000000 000000009592d4d8 c000000000c86854 GPR12: 0000000000000002 c000000006ead300 0000000000a51000 0000000000000001 GPR16: f000000003354380 ffffffffffffffff ffffffffffffff80 0000000000000000 GPR20: 0000000000000001 c000000000c600a8 0000000000000001 0000000000000001 GPR24: 0000000003354380 c000000000000000 0000000000000000 c000000000b65950 GPR28: 0000002000000000 00000000000cd50e 0000000000bf50d9 c000000000c7c230 [ 543.076005] NIP [c000000000036eb0] .kernel_map_pages+0x1e0/0x3f8 [ 543.076016] LR [c000000000036ea4] .kernel_map_pages+0x1d4/0x3f8 [ 543.076025] Call Trace: [ 543.076033] [c0000000a9083540] [c000000000036ea4] .kernel_map_pages+0x1d4/0x3f8 (unreliable) [ 543.076053] [c0000000a9083640] [c000000000167638] .get_page_from_freelist+0x6cc/0x8dc [ 543.076067] [c0000000a9083800] [c000000000167a48] .__alloc_pages_nodemask+0x200/0x96c [ 543.076082] [c0000000a90839c0] [c0000000001ade44] .alloc_pages_vma+0x160/0x1e4 [ 543.076098] [c0000000a9083a80] [c00000000018ce04] .handle_pte_fault+0x1b0/0x7e8 [ 543.076113] [c0000000a9083b50] [c00000000018d5a8] .handle_mm_fault+0x16c/0x1a0 [ 543.076129] [c0000000a9083c00] [c0000000007bf1dc] .do_page_fault+0x4d0/0x7a4 [ 543.076144] [c0000000a9083e30] [c0000000000090e8] handle_page_fault+0x10/0x30 [ 543.076155] Instruction dump: [ 543.076163] 7c630038 78631d88 e80a0000 f8410028 7c0903a6 e91f01de e96a0010 e84a0008 [ 543.076192] 4e800421 e8410028 7c7107b4 7a200fe0 <0b000000> 7f63db78 48785781 60000000 [ 543.076224] ---[ end trace bd5807e8d6ae186b ]--- Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2013-04-15 10:53:20 -06:00
ret = hpte_insert_repeating(hash, vpn, __pa(vaddr), mode,
HPTE_V_BOLTED,
mmu_linear_psize, mmu_kernel_ssize);
BUG_ON (ret < 0);
spin_lock(&linear_map_hash_lock);
BUG_ON(linear_map_hash_slots[lmi] & 0x80);
linear_map_hash_slots[lmi] = ret | 0x80;
spin_unlock(&linear_map_hash_lock);
}
static void kernel_unmap_linear_page(unsigned long vaddr, unsigned long lmi)
{
unsigned long hash, hidx, slot;
unsigned long vsid = get_kernel_vsid(vaddr, mmu_kernel_ssize);
unsigned long vpn = hpt_vpn(vaddr, vsid, mmu_kernel_ssize);
hash = hpt_hash(vpn, PAGE_SHIFT, mmu_kernel_ssize);
spin_lock(&linear_map_hash_lock);
BUG_ON(!(linear_map_hash_slots[lmi] & 0x80));
hidx = linear_map_hash_slots[lmi] & 0x7f;
linear_map_hash_slots[lmi] = 0;
spin_unlock(&linear_map_hash_lock);
if (hidx & _PTEIDX_SECONDARY)
hash = ~hash;
slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
slot += hidx & _PTEIDX_GROUP_IX;
mmu_hash_ops.hpte_invalidate(slot, vpn, mmu_linear_psize,
mmu_linear_psize,
mmu_kernel_ssize, 0);
}
void __kernel_map_pages(struct page *page, int numpages, int enable)
{
unsigned long flags, vaddr, lmi;
int i;
local_irq_save(flags);
for (i = 0; i < numpages; i++, page++) {
vaddr = (unsigned long)page_address(page);
lmi = __pa(vaddr) >> PAGE_SHIFT;
if (lmi >= linear_map_hash_count)
continue;
if (enable)
kernel_map_linear_page(vaddr, lmi);
else
kernel_unmap_linear_page(vaddr, lmi);
}
local_irq_restore(flags);
}
#endif /* CONFIG_DEBUG_PAGEALLOC */
void hash__setup_initial_memory_limit(phys_addr_t first_memblock_base,
phys_addr_t first_memblock_size)
{
/* We don't currently support the first MEMBLOCK not mapping 0
* physical on those processors
*/
BUG_ON(first_memblock_base != 0);
/*
* On virtualized systems the first entry is our RMA region aka VRMA,
* non-virtualized 64-bit hash MMU systems don't have a limitation
* on real mode access.
*
* For guests on platforms before POWER9, we clamp the it limit to 1G
* to avoid some funky things such as RTAS bugs etc...
*/
if (!early_cpu_has_feature(CPU_FTR_HVMODE)) {
ppc64_rma_size = first_memblock_size;
if (!early_cpu_has_feature(CPU_FTR_ARCH_300))
ppc64_rma_size = min_t(u64, ppc64_rma_size, 0x40000000);
/* Finally limit subsequent allocations */
memblock_set_current_limit(ppc64_rma_size);
} else {
ppc64_rma_size = ULONG_MAX;
}
}
#ifdef CONFIG_DEBUG_FS
static int hpt_order_get(void *data, u64 *val)
{
*val = ppc64_pft_size;
return 0;
}
static int hpt_order_set(void *data, u64 val)
{
if (!mmu_hash_ops.resize_hpt)
return -ENODEV;
return mmu_hash_ops.resize_hpt(val);
}
DEFINE_DEBUGFS_ATTRIBUTE(fops_hpt_order, hpt_order_get, hpt_order_set, "%llu\n");
static int __init hash64_debugfs(void)
{
if (!debugfs_create_file_unsafe("hpt_order", 0600, powerpc_debugfs_root,
NULL, &fops_hpt_order)) {
pr_err("lpar: unable to create hpt_order debugsfs file\n");
}
return 0;
}
machine_device_initcall(pseries, hash64_debugfs);
#endif /* CONFIG_DEBUG_FS */