2009-10-19 18:32:58 -06:00
|
|
|
/*
|
|
|
|
* arch/arm/mach-omap1/include/mach/hardware.h
|
2012-08-31 11:59:07 -06:00
|
|
|
*
|
|
|
|
* Hardware definitions for TI OMAP processors and boards
|
|
|
|
*
|
|
|
|
* NOTE: Please put device driver specific defines into a separate header
|
|
|
|
* file for each driver.
|
|
|
|
*
|
|
|
|
* Copyright (C) 2001 RidgeRun, Inc.
|
|
|
|
* Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
|
|
|
|
*
|
|
|
|
* Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
|
|
|
|
* and Dirk Behme <dirk.behme@de.bosch.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
* option) any later version.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
|
|
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
|
|
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License along
|
|
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
2009-10-19 18:32:58 -06:00
|
|
|
*/
|
|
|
|
|
2012-08-31 11:59:07 -06:00
|
|
|
#ifndef __ASM_ARCH_OMAP_HARDWARE_H
|
|
|
|
#define __ASM_ARCH_OMAP_HARDWARE_H
|
2012-02-24 11:34:35 -07:00
|
|
|
|
2012-08-31 11:59:07 -06:00
|
|
|
#include <asm/sizes.h>
|
2012-02-24 11:34:35 -07:00
|
|
|
#ifndef __ASSEMBLER__
|
2012-08-31 11:59:07 -06:00
|
|
|
#include <asm/types.h>
|
2012-10-30 16:30:44 -06:00
|
|
|
#include <mach/soc.h>
|
2012-08-31 11:59:07 -06:00
|
|
|
|
2012-02-24 11:34:35 -07:00
|
|
|
/*
|
|
|
|
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
|
|
|
|
*/
|
|
|
|
extern u8 omap_readb(u32 pa);
|
|
|
|
extern u16 omap_readw(u32 pa);
|
|
|
|
extern u32 omap_readl(u32 pa);
|
|
|
|
extern void omap_writeb(u8 v, u32 pa);
|
|
|
|
extern void omap_writew(u16 v, u32 pa);
|
|
|
|
extern void omap_writel(u32 v, u32 pa);
|
|
|
|
|
2012-10-02 14:39:28 -06:00
|
|
|
#include <mach/tc.h>
|
2012-02-24 11:34:35 -07:00
|
|
|
|
|
|
|
/* Almost all documentation for chip and board memory maps assumes
|
|
|
|
* BM is clear. Most devel boards have a switch to control booting
|
|
|
|
* from NOR flash (using external chipselect 3) rather than mask ROM,
|
|
|
|
* which uses BM to interchange the physical CS0 and CS3 addresses.
|
|
|
|
*/
|
|
|
|
static inline u32 omap_cs0m_phys(void)
|
|
|
|
{
|
|
|
|
return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
|
|
|
|
? OMAP_CS3_PHYS : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u32 omap_cs3_phys(void)
|
|
|
|
{
|
|
|
|
return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
|
|
|
|
? 0 : OMAP_CS3_PHYS;
|
|
|
|
}
|
|
|
|
|
2012-08-31 11:59:07 -06:00
|
|
|
#endif /* ifndef __ASSEMBLER__ */
|
|
|
|
|
2012-10-30 16:30:44 -06:00
|
|
|
#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
|
|
|
|
#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
|
|
|
|
|
2012-10-15 13:50:46 -06:00
|
|
|
#include <mach/serial.h>
|
2012-08-31 11:59:07 -06:00
|
|
|
|
|
|
|
/*
|
|
|
|
* ---------------------------------------------------------------------------
|
|
|
|
* Common definitions for all OMAP processors
|
|
|
|
* NOTE: Put all processor or board specific parts to the special header
|
|
|
|
* files.
|
|
|
|
* ---------------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ----------------------------------------------------------------------------
|
|
|
|
* Timers
|
|
|
|
* ----------------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
#define OMAP_MPU_TIMER1_BASE (0xfffec500)
|
|
|
|
#define OMAP_MPU_TIMER2_BASE (0xfffec600)
|
|
|
|
#define OMAP_MPU_TIMER3_BASE (0xfffec700)
|
|
|
|
#define MPU_TIMER_FREE (1 << 6)
|
|
|
|
#define MPU_TIMER_CLOCK_ENABLE (1 << 5)
|
|
|
|
#define MPU_TIMER_AR (1 << 1)
|
|
|
|
#define MPU_TIMER_ST (1 << 0)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ----------------------------------------------------------------------------
|
|
|
|
* Clocks
|
|
|
|
* ----------------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
#define CLKGEN_REG_BASE (0xfffece00)
|
|
|
|
#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
|
|
|
|
#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
|
|
|
|
#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
|
|
|
|
#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
|
|
|
|
#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
|
|
|
|
#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
|
|
|
|
#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
|
|
|
|
#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
|
|
|
|
|
|
|
|
#define CK_RATEF 1
|
|
|
|
#define CK_IDLEF 2
|
|
|
|
#define CK_ENABLEF 4
|
|
|
|
#define CK_SELECTF 8
|
|
|
|
#define SETARM_IDLE_SHIFT
|
|
|
|
|
|
|
|
/* DPLL control registers */
|
|
|
|
#define DPLL_CTL (0xfffecf00)
|
|
|
|
|
|
|
|
/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
|
|
|
|
#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000)
|
|
|
|
#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
|
|
|
|
#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
|
|
|
|
#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
|
|
|
|
#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ---------------------------------------------------------------------------
|
|
|
|
* UPLD
|
|
|
|
* ---------------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
#define ULPD_REG_BASE (0xfffe0800)
|
|
|
|
#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14)
|
|
|
|
#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24)
|
|
|
|
#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30)
|
|
|
|
# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */
|
|
|
|
# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */
|
|
|
|
#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34)
|
|
|
|
# define SOFT_UDC_REQ (1 << 4)
|
|
|
|
# define SOFT_USB_CLK_REQ (1 << 3)
|
|
|
|
# define SOFT_DPLL_REQ (1 << 0)
|
|
|
|
#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c)
|
|
|
|
#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40)
|
|
|
|
#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c)
|
|
|
|
#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50)
|
|
|
|
#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68)
|
|
|
|
# define DIS_MMC2_DPLL_REQ (1 << 11)
|
|
|
|
# define DIS_MMC1_DPLL_REQ (1 << 10)
|
|
|
|
# define DIS_UART3_DPLL_REQ (1 << 9)
|
|
|
|
# define DIS_UART2_DPLL_REQ (1 << 8)
|
|
|
|
# define DIS_UART1_DPLL_REQ (1 << 7)
|
|
|
|
# define DIS_USB_HOST_DPLL_REQ (1 << 6)
|
|
|
|
#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74)
|
|
|
|
#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ---------------------------------------------------------------------------
|
|
|
|
* Watchdog timer
|
|
|
|
* ---------------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Watchdog timer within the OMAP3.2 gigacell */
|
|
|
|
#define OMAP_MPU_WATCHDOG_BASE (0xfffec800)
|
|
|
|
#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0)
|
|
|
|
#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
|
|
|
|
#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
|
|
|
|
#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ---------------------------------------------------------------------------
|
|
|
|
* Interrupts
|
|
|
|
* ---------------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
|
|
|
|
|
|
/*
|
|
|
|
* XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
|
|
|
|
* or something similar.. -- PFM.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define OMAP_IH1_BASE 0xfffecb00
|
|
|
|
#define OMAP_IH2_BASE 0xfffe0000
|
|
|
|
|
|
|
|
#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00)
|
|
|
|
#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04)
|
|
|
|
#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10)
|
|
|
|
#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14)
|
|
|
|
#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18)
|
|
|
|
#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c)
|
|
|
|
#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c)
|
|
|
|
|
|
|
|
#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00)
|
|
|
|
#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04)
|
|
|
|
#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10)
|
|
|
|
#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14)
|
|
|
|
#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18)
|
|
|
|
#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c)
|
|
|
|
#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c)
|
|
|
|
|
|
|
|
#define IRQ_ITR_REG_OFFSET 0x00
|
|
|
|
#define IRQ_MIR_REG_OFFSET 0x04
|
|
|
|
#define IRQ_SIR_IRQ_REG_OFFSET 0x10
|
|
|
|
#define IRQ_SIR_FIQ_REG_OFFSET 0x14
|
|
|
|
#define IRQ_CONTROL_REG_OFFSET 0x18
|
|
|
|
#define IRQ_ISR_REG_OFFSET 0x9c
|
|
|
|
#define IRQ_ILR0_REG_OFFSET 0x1c
|
|
|
|
#define IRQ_GMR_REG_OFFSET 0xa0
|
|
|
|
|
2012-02-24 11:34:35 -07:00
|
|
|
#endif
|
|
|
|
|
2012-08-31 11:59:07 -06:00
|
|
|
/*
|
|
|
|
* ----------------------------------------------------------------------------
|
|
|
|
* System control registers
|
|
|
|
* ----------------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
#define MOD_CONF_CTRL_0 0xfffe1080
|
|
|
|
#define MOD_CONF_CTRL_1 0xfffe1110
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ----------------------------------------------------------------------------
|
|
|
|
* Pin multiplexing registers
|
|
|
|
* ----------------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
#define FUNC_MUX_CTRL_0 0xfffe1000
|
|
|
|
#define FUNC_MUX_CTRL_1 0xfffe1004
|
|
|
|
#define FUNC_MUX_CTRL_2 0xfffe1008
|
|
|
|
#define COMP_MODE_CTRL_0 0xfffe100c
|
|
|
|
#define FUNC_MUX_CTRL_3 0xfffe1010
|
|
|
|
#define FUNC_MUX_CTRL_4 0xfffe1014
|
|
|
|
#define FUNC_MUX_CTRL_5 0xfffe1018
|
|
|
|
#define FUNC_MUX_CTRL_6 0xfffe101C
|
|
|
|
#define FUNC_MUX_CTRL_7 0xfffe1020
|
|
|
|
#define FUNC_MUX_CTRL_8 0xfffe1024
|
|
|
|
#define FUNC_MUX_CTRL_9 0xfffe1028
|
|
|
|
#define FUNC_MUX_CTRL_A 0xfffe102C
|
|
|
|
#define FUNC_MUX_CTRL_B 0xfffe1030
|
|
|
|
#define FUNC_MUX_CTRL_C 0xfffe1034
|
|
|
|
#define FUNC_MUX_CTRL_D 0xfffe1038
|
|
|
|
#define PULL_DWN_CTRL_0 0xfffe1040
|
|
|
|
#define PULL_DWN_CTRL_1 0xfffe1044
|
|
|
|
#define PULL_DWN_CTRL_2 0xfffe1048
|
|
|
|
#define PULL_DWN_CTRL_3 0xfffe104c
|
|
|
|
#define PULL_DWN_CTRL_4 0xfffe10ac
|
|
|
|
|
|
|
|
/* OMAP-1610 specific multiplexing registers */
|
|
|
|
#define FUNC_MUX_CTRL_E 0xfffe1090
|
|
|
|
#define FUNC_MUX_CTRL_F 0xfffe1094
|
|
|
|
#define FUNC_MUX_CTRL_10 0xfffe1098
|
|
|
|
#define FUNC_MUX_CTRL_11 0xfffe109c
|
|
|
|
#define FUNC_MUX_CTRL_12 0xfffe10a0
|
|
|
|
#define PU_PD_SEL_0 0xfffe10b4
|
|
|
|
#define PU_PD_SEL_1 0xfffe10b8
|
|
|
|
#define PU_PD_SEL_2 0xfffe10bc
|
|
|
|
#define PU_PD_SEL_3 0xfffe10c0
|
|
|
|
#define PU_PD_SEL_4 0xfffe10c4
|
|
|
|
|
|
|
|
/* Timer32K for 1610 and 1710*/
|
|
|
|
#define OMAP_TIMER32K_BASE 0xFFFBC400
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ---------------------------------------------------------------------------
|
|
|
|
* TIPB bus interface
|
|
|
|
* ---------------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
#define TIPB_PUBLIC_CNTL_BASE 0xfffed300
|
|
|
|
#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8)
|
|
|
|
#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00
|
|
|
|
#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ----------------------------------------------------------------------------
|
|
|
|
* MPUI interface
|
|
|
|
* ----------------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
#define MPUI_BASE (0xfffec900)
|
|
|
|
#define MPUI_CTRL (MPUI_BASE + 0x0)
|
|
|
|
#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4)
|
|
|
|
#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8)
|
|
|
|
#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc)
|
|
|
|
#define MPUI_STATUS_REG (MPUI_BASE + 0x10)
|
|
|
|
#define MPUI_DSP_STATUS (MPUI_BASE + 0x14)
|
|
|
|
#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18)
|
|
|
|
#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ----------------------------------------------------------------------------
|
|
|
|
* LED Pulse Generator
|
|
|
|
* ----------------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
#define OMAP_LPG1_BASE 0xfffbd000
|
|
|
|
#define OMAP_LPG2_BASE 0xfffbd800
|
|
|
|
#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00)
|
|
|
|
#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04)
|
|
|
|
#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00)
|
|
|
|
#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ----------------------------------------------------------------------------
|
|
|
|
* Pulse-Width Light
|
|
|
|
* ----------------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
#define OMAP_PWL_BASE 0xfffb5800
|
|
|
|
#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00)
|
|
|
|
#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ---------------------------------------------------------------------------
|
|
|
|
* Processor specific defines
|
|
|
|
* ---------------------------------------------------------------------------
|
|
|
|
*/
|
|
|
|
|
2012-08-31 18:04:35 -06:00
|
|
|
#include "omap7xx.h"
|
|
|
|
#include "omap1510.h"
|
|
|
|
#include "omap16xx.h"
|
2012-08-31 11:59:07 -06:00
|
|
|
|
|
|
|
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
|