License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 08:07:57 -06:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 04:02:48 -06:00
|
|
|
#ifndef _ASM_X86_PERF_EVENT_H
|
|
|
|
|
#define _ASM_X86_PERF_EVENT_H
|
2007-10-15 05:57:47 -06:00
|
|
|
|
2008-12-17 01:09:13 -07:00
|
|
|
/*
|
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 04:02:48 -06:00
|
|
|
* Performance event hw details:
|
2008-12-17 01:09:13 -07:00
|
|
|
*/
|
|
|
|
|
|
2012-06-20 12:46:33 -06:00
|
|
|
#define INTEL_PMC_MAX_GENERIC 32
|
|
|
|
|
#define INTEL_PMC_MAX_FIXED 3
|
|
|
|
|
#define INTEL_PMC_IDX_FIXED 32
|
2008-12-17 01:09:13 -07:00
|
|
|
|
2008-12-17 05:09:20 -07:00
|
|
|
#define X86_PMC_IDX_MAX 64
|
|
|
|
|
|
2008-12-03 02:39:53 -07:00
|
|
|
#define MSR_ARCH_PERFMON_PERFCTR0 0xc1
|
|
|
|
|
#define MSR_ARCH_PERFMON_PERFCTR1 0xc2
|
2007-10-15 05:57:47 -06:00
|
|
|
|
2008-12-03 02:39:53 -07:00
|
|
|
#define MSR_ARCH_PERFMON_EVENTSEL0 0x186
|
|
|
|
|
#define MSR_ARCH_PERFMON_EVENTSEL1 0x187
|
2007-10-15 05:57:47 -06:00
|
|
|
|
2010-03-30 03:28:21 -06:00
|
|
|
#define ARCH_PERFMON_EVENTSEL_EVENT 0x000000FFULL
|
|
|
|
|
#define ARCH_PERFMON_EVENTSEL_UMASK 0x0000FF00ULL
|
|
|
|
|
#define ARCH_PERFMON_EVENTSEL_USR (1ULL << 16)
|
|
|
|
|
#define ARCH_PERFMON_EVENTSEL_OS (1ULL << 17)
|
|
|
|
|
#define ARCH_PERFMON_EVENTSEL_EDGE (1ULL << 18)
|
2012-02-26 07:55:40 -07:00
|
|
|
#define ARCH_PERFMON_EVENTSEL_PIN_CONTROL (1ULL << 19)
|
2010-03-30 03:28:21 -06:00
|
|
|
#define ARCH_PERFMON_EVENTSEL_INT (1ULL << 20)
|
|
|
|
|
#define ARCH_PERFMON_EVENTSEL_ANY (1ULL << 21)
|
|
|
|
|
#define ARCH_PERFMON_EVENTSEL_ENABLE (1ULL << 22)
|
|
|
|
|
#define ARCH_PERFMON_EVENTSEL_INV (1ULL << 23)
|
|
|
|
|
#define ARCH_PERFMON_EVENTSEL_CMASK 0xFF000000ULL
|
|
|
|
|
|
2013-06-17 18:36:48 -06:00
|
|
|
#define HSW_IN_TX (1ULL << 32)
|
|
|
|
|
#define HSW_IN_TX_CHECKPOINTED (1ULL << 33)
|
|
|
|
|
|
2013-02-06 10:26:29 -07:00
|
|
|
#define AMD64_EVENTSEL_INT_CORE_ENABLE (1ULL << 36)
|
2013-02-06 10:26:26 -07:00
|
|
|
#define AMD64_EVENTSEL_GUESTONLY (1ULL << 40)
|
|
|
|
|
#define AMD64_EVENTSEL_HOSTONLY (1ULL << 41)
|
2011-10-05 06:01:17 -06:00
|
|
|
|
2013-02-06 10:26:29 -07:00
|
|
|
#define AMD64_EVENTSEL_INT_CORE_SEL_SHIFT 37
|
|
|
|
|
#define AMD64_EVENTSEL_INT_CORE_SEL_MASK \
|
|
|
|
|
(0xFULL << AMD64_EVENTSEL_INT_CORE_SEL_SHIFT)
|
|
|
|
|
|
2010-03-30 03:28:21 -06:00
|
|
|
#define AMD64_EVENTSEL_EVENT \
|
|
|
|
|
(ARCH_PERFMON_EVENTSEL_EVENT | (0x0FULL << 32))
|
|
|
|
|
#define INTEL_ARCH_EVENT_MASK \
|
|
|
|
|
(ARCH_PERFMON_EVENTSEL_UMASK | ARCH_PERFMON_EVENTSEL_EVENT)
|
|
|
|
|
|
2018-09-27 09:51:55 -06:00
|
|
|
#define AMD64_L3_SLICE_SHIFT 48
|
|
|
|
|
#define AMD64_L3_SLICE_MASK \
|
|
|
|
|
((0xFULL) << AMD64_L3_SLICE_SHIFT)
|
|
|
|
|
|
|
|
|
|
#define AMD64_L3_THREAD_SHIFT 56
|
|
|
|
|
#define AMD64_L3_THREAD_MASK \
|
|
|
|
|
((0xFFULL) << AMD64_L3_THREAD_SHIFT)
|
|
|
|
|
|
2010-03-30 03:28:21 -06:00
|
|
|
#define X86_RAW_EVENT_MASK \
|
|
|
|
|
(ARCH_PERFMON_EVENTSEL_EVENT | \
|
|
|
|
|
ARCH_PERFMON_EVENTSEL_UMASK | \
|
|
|
|
|
ARCH_PERFMON_EVENTSEL_EDGE | \
|
|
|
|
|
ARCH_PERFMON_EVENTSEL_INV | \
|
|
|
|
|
ARCH_PERFMON_EVENTSEL_CMASK)
|
2014-08-11 13:27:10 -06:00
|
|
|
#define X86_ALL_EVENT_FLAGS \
|
|
|
|
|
(ARCH_PERFMON_EVENTSEL_EDGE | \
|
|
|
|
|
ARCH_PERFMON_EVENTSEL_INV | \
|
|
|
|
|
ARCH_PERFMON_EVENTSEL_CMASK | \
|
|
|
|
|
ARCH_PERFMON_EVENTSEL_ANY | \
|
|
|
|
|
ARCH_PERFMON_EVENTSEL_PIN_CONTROL | \
|
|
|
|
|
HSW_IN_TX | \
|
|
|
|
|
HSW_IN_TX_CHECKPOINTED)
|
2010-03-30 03:28:21 -06:00
|
|
|
#define AMD64_RAW_EVENT_MASK \
|
|
|
|
|
(X86_RAW_EVENT_MASK | \
|
|
|
|
|
AMD64_EVENTSEL_EVENT)
|
2013-02-06 10:26:29 -07:00
|
|
|
#define AMD64_RAW_EVENT_MASK_NB \
|
|
|
|
|
(AMD64_EVENTSEL_EVENT | \
|
|
|
|
|
ARCH_PERFMON_EVENTSEL_UMASK)
|
2011-09-21 03:30:17 -06:00
|
|
|
#define AMD64_NUM_COUNTERS 4
|
2012-06-20 12:46:35 -06:00
|
|
|
#define AMD64_NUM_COUNTERS_CORE 6
|
2013-02-06 10:26:29 -07:00
|
|
|
#define AMD64_NUM_COUNTERS_NB 4
|
2009-10-06 08:42:08 -06:00
|
|
|
|
2011-09-21 03:30:17 -06:00
|
|
|
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL 0x3c
|
2008-12-03 02:39:53 -07:00
|
|
|
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK (0x00 << 8)
|
2011-09-21 03:30:17 -06:00
|
|
|
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX 0
|
2007-10-15 05:57:47 -06:00
|
|
|
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT \
|
2008-12-03 02:39:53 -07:00
|
|
|
(1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX))
|
|
|
|
|
|
2011-09-21 03:30:17 -06:00
|
|
|
#define ARCH_PERFMON_BRANCH_MISSES_RETIRED 6
|
2011-11-10 05:57:26 -07:00
|
|
|
#define ARCH_PERFMON_EVENTS_COUNT 7
|
2007-10-15 05:57:47 -06:00
|
|
|
|
2008-12-17 01:09:13 -07:00
|
|
|
/*
|
|
|
|
|
* Intel "Architectural Performance Monitoring" CPUID
|
|
|
|
|
* detection/enumeration details:
|
|
|
|
|
*/
|
2007-10-15 05:57:47 -06:00
|
|
|
union cpuid10_eax {
|
|
|
|
|
struct {
|
|
|
|
|
unsigned int version_id:8;
|
2010-03-29 10:36:50 -06:00
|
|
|
unsigned int num_counters:8;
|
2007-10-15 05:57:47 -06:00
|
|
|
unsigned int bit_width:8;
|
|
|
|
|
unsigned int mask_length:8;
|
|
|
|
|
} split;
|
|
|
|
|
unsigned int full;
|
|
|
|
|
};
|
|
|
|
|
|
2011-11-10 05:57:26 -07:00
|
|
|
union cpuid10_ebx {
|
|
|
|
|
struct {
|
|
|
|
|
unsigned int no_unhalted_core_cycles:1;
|
|
|
|
|
unsigned int no_instructions_retired:1;
|
|
|
|
|
unsigned int no_unhalted_reference_cycles:1;
|
|
|
|
|
unsigned int no_llc_reference:1;
|
|
|
|
|
unsigned int no_llc_misses:1;
|
|
|
|
|
unsigned int no_branch_instruction_retired:1;
|
|
|
|
|
unsigned int no_branch_misses_retired:1;
|
|
|
|
|
} split;
|
|
|
|
|
unsigned int full;
|
|
|
|
|
};
|
|
|
|
|
|
2008-12-17 02:51:15 -07:00
|
|
|
union cpuid10_edx {
|
|
|
|
|
struct {
|
2010-06-03 13:00:31 -06:00
|
|
|
unsigned int num_counters_fixed:5;
|
|
|
|
|
unsigned int bit_width_fixed:8;
|
|
|
|
|
unsigned int reserved:19;
|
2008-12-17 02:51:15 -07:00
|
|
|
} split;
|
|
|
|
|
unsigned int full;
|
|
|
|
|
};
|
|
|
|
|
|
2011-11-10 05:57:27 -07:00
|
|
|
struct x86_pmu_capability {
|
|
|
|
|
int version;
|
|
|
|
|
int num_counters_gp;
|
|
|
|
|
int num_counters_fixed;
|
|
|
|
|
int bit_width_gp;
|
|
|
|
|
int bit_width_fixed;
|
|
|
|
|
unsigned int events_mask;
|
|
|
|
|
int events_mask_len;
|
|
|
|
|
};
|
2008-12-17 02:51:15 -07:00
|
|
|
|
|
|
|
|
/*
|
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 04:02:48 -06:00
|
|
|
* Fixed-purpose performance events:
|
2008-12-17 02:51:15 -07:00
|
|
|
*/
|
|
|
|
|
|
2008-12-17 05:09:20 -07:00
|
|
|
/*
|
|
|
|
|
* All 3 fixed-mode PMCs are configured via this single MSR:
|
|
|
|
|
*/
|
2011-12-10 16:28:51 -07:00
|
|
|
#define MSR_ARCH_PERFMON_FIXED_CTR_CTRL 0x38d
|
2008-12-17 05:09:20 -07:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The counts are available in three separate MSRs:
|
|
|
|
|
*/
|
|
|
|
|
|
2008-12-17 02:51:15 -07:00
|
|
|
/* Instr_Retired.Any: */
|
2011-12-10 16:28:51 -07:00
|
|
|
#define MSR_ARCH_PERFMON_FIXED_CTR0 0x309
|
2012-06-20 12:46:33 -06:00
|
|
|
#define INTEL_PMC_IDX_FIXED_INSTRUCTIONS (INTEL_PMC_IDX_FIXED + 0)
|
2008-12-17 02:51:15 -07:00
|
|
|
|
|
|
|
|
/* CPU_CLK_Unhalted.Core: */
|
2011-12-10 16:28:51 -07:00
|
|
|
#define MSR_ARCH_PERFMON_FIXED_CTR1 0x30a
|
2012-06-20 12:46:33 -06:00
|
|
|
#define INTEL_PMC_IDX_FIXED_CPU_CYCLES (INTEL_PMC_IDX_FIXED + 1)
|
2008-12-17 02:51:15 -07:00
|
|
|
|
|
|
|
|
/* CPU_CLK_Unhalted.Ref: */
|
2011-12-10 16:28:51 -07:00
|
|
|
#define MSR_ARCH_PERFMON_FIXED_CTR2 0x30b
|
2012-06-20 12:46:33 -06:00
|
|
|
#define INTEL_PMC_IDX_FIXED_REF_CYCLES (INTEL_PMC_IDX_FIXED + 2)
|
|
|
|
|
#define INTEL_PMC_MSK_FIXED_REF_CYCLES (1ULL << INTEL_PMC_IDX_FIXED_REF_CYCLES)
|
2008-12-17 02:51:15 -07:00
|
|
|
|
2009-07-21 07:56:48 -06:00
|
|
|
/*
|
|
|
|
|
* We model BTS tracing as another fixed-mode PMC.
|
|
|
|
|
*
|
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 04:02:48 -06:00
|
|
|
* We choose a value in the middle of the fixed event range, since lower
|
|
|
|
|
* values are used by actual fixed events and higher values are used
|
2009-07-21 07:56:48 -06:00
|
|
|
* to indicate other overflow conditions in the PERF_GLOBAL_STATUS msr.
|
|
|
|
|
*/
|
2012-06-20 12:46:33 -06:00
|
|
|
#define INTEL_PMC_IDX_FIXED_BTS (INTEL_PMC_IDX_FIXED + 16)
|
2009-07-21 07:56:48 -06:00
|
|
|
|
2015-05-10 13:22:41 -06:00
|
|
|
#define GLOBAL_STATUS_COND_CHG BIT_ULL(63)
|
|
|
|
|
#define GLOBAL_STATUS_BUFFER_OVF BIT_ULL(62)
|
|
|
|
|
#define GLOBAL_STATUS_UNC_OVF BIT_ULL(61)
|
|
|
|
|
#define GLOBAL_STATUS_ASIF BIT_ULL(60)
|
|
|
|
|
#define GLOBAL_STATUS_COUNTERS_FROZEN BIT_ULL(59)
|
|
|
|
|
#define GLOBAL_STATUS_LBRS_FROZEN BIT_ULL(58)
|
2016-03-03 12:50:40 -07:00
|
|
|
#define GLOBAL_STATUS_TRACE_TOPAPMI BIT_ULL(55)
|
2015-05-10 13:22:41 -06:00
|
|
|
|
2011-09-21 03:30:17 -06:00
|
|
|
/*
|
|
|
|
|
* IBS cpuid feature detection
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define IBS_CPUID_FEATURES 0x8000001b
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Same bit mask as for IBS cpuid feature flags (Fn8000_001B_EAX), but
|
|
|
|
|
* bit 0 is used to indicate the existence of IBS.
|
|
|
|
|
*/
|
|
|
|
|
#define IBS_CAPS_AVAIL (1U<<0)
|
|
|
|
|
#define IBS_CAPS_FETCHSAM (1U<<1)
|
|
|
|
|
#define IBS_CAPS_OPSAM (1U<<2)
|
|
|
|
|
#define IBS_CAPS_RDWROPCNT (1U<<3)
|
|
|
|
|
#define IBS_CAPS_OPCNT (1U<<4)
|
|
|
|
|
#define IBS_CAPS_BRNTRGT (1U<<5)
|
|
|
|
|
#define IBS_CAPS_OPCNTEXT (1U<<6)
|
2012-04-02 12:19:11 -06:00
|
|
|
#define IBS_CAPS_RIPINVALIDCHK (1U<<7)
|
2014-11-10 13:24:26 -07:00
|
|
|
#define IBS_CAPS_OPBRNFUSE (1U<<8)
|
|
|
|
|
#define IBS_CAPS_FETCHCTLEXTD (1U<<9)
|
|
|
|
|
#define IBS_CAPS_OPDATA4 (1U<<10)
|
2011-09-21 03:30:17 -06:00
|
|
|
|
|
|
|
|
#define IBS_CAPS_DEFAULT (IBS_CAPS_AVAIL \
|
|
|
|
|
| IBS_CAPS_FETCHSAM \
|
|
|
|
|
| IBS_CAPS_OPSAM)
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* IBS APIC setup
|
|
|
|
|
*/
|
|
|
|
|
#define IBSCTL 0x1cc
|
|
|
|
|
#define IBSCTL_LVT_OFFSET_VALID (1ULL<<8)
|
|
|
|
|
#define IBSCTL_LVT_OFFSET_MASK 0x0F
|
|
|
|
|
|
2012-04-02 12:19:11 -06:00
|
|
|
/* ibs fetch bits/masks */
|
2010-09-22 09:45:39 -06:00
|
|
|
#define IBS_FETCH_RAND_EN (1ULL<<57)
|
|
|
|
|
#define IBS_FETCH_VAL (1ULL<<49)
|
|
|
|
|
#define IBS_FETCH_ENABLE (1ULL<<48)
|
|
|
|
|
#define IBS_FETCH_CNT 0xFFFF0000ULL
|
|
|
|
|
#define IBS_FETCH_MAX_CNT 0x0000FFFFULL
|
2010-02-25 11:40:46 -07:00
|
|
|
|
2012-04-02 12:19:11 -06:00
|
|
|
/* ibs op bits/masks */
|
2011-12-15 09:56:39 -07:00
|
|
|
/* lower 4 bits of the current count are ignored: */
|
|
|
|
|
#define IBS_OP_CUR_CNT (0xFFFF0ULL<<32)
|
2010-09-22 09:45:39 -06:00
|
|
|
#define IBS_OP_CNT_CTL (1ULL<<19)
|
|
|
|
|
#define IBS_OP_VAL (1ULL<<18)
|
|
|
|
|
#define IBS_OP_ENABLE (1ULL<<17)
|
|
|
|
|
#define IBS_OP_MAX_CNT 0x0000FFFFULL
|
|
|
|
|
#define IBS_OP_MAX_CNT_EXT 0x007FFFFFULL /* not a register bit mask */
|
2012-04-02 12:19:11 -06:00
|
|
|
#define IBS_RIP_INVALID (1ULL<<38)
|
2009-07-21 07:56:48 -06:00
|
|
|
|
2012-05-11 03:44:59 -06:00
|
|
|
#ifdef CONFIG_X86_LOCAL_APIC
|
2011-09-21 03:30:18 -06:00
|
|
|
extern u32 get_ibs_caps(void);
|
2012-05-11 03:44:59 -06:00
|
|
|
#else
|
|
|
|
|
static inline u32 get_ibs_caps(void) { return 0; }
|
|
|
|
|
#endif
|
2011-09-21 03:30:18 -06:00
|
|
|
|
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 04:02:48 -06:00
|
|
|
#ifdef CONFIG_PERF_EVENTS
|
|
|
|
|
extern void perf_events_lapic_init(void);
|
2009-06-22 08:35:24 -06:00
|
|
|
|
2010-03-03 05:12:23 -07:00
|
|
|
/*
|
2012-07-10 01:42:15 -06:00
|
|
|
* Abuse bits {3,5} of the cpu eflags register. These flags are otherwise
|
|
|
|
|
* unused and ABI specified to be 0, so nobody should care what we do with
|
|
|
|
|
* them.
|
|
|
|
|
*
|
|
|
|
|
* EXACT - the IP points to the exact instruction that triggered the
|
|
|
|
|
* event (HW bugs exempt).
|
|
|
|
|
* VM - original X86_VM_MASK; see set_linear_ip().
|
2010-03-03 05:12:23 -07:00
|
|
|
*/
|
|
|
|
|
#define PERF_EFLAGS_EXACT (1UL << 3)
|
2012-07-10 01:42:15 -06:00
|
|
|
#define PERF_EFLAGS_VM (1UL << 5)
|
2010-03-03 05:12:23 -07:00
|
|
|
|
2010-04-18 23:32:41 -06:00
|
|
|
struct pt_regs;
|
|
|
|
|
extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
|
|
|
|
|
extern unsigned long perf_misc_flags(struct pt_regs *regs);
|
|
|
|
|
#define perf_misc_flags(regs) perf_misc_flags(regs)
|
2010-03-03 05:12:23 -07:00
|
|
|
|
2010-05-19 23:47:21 -06:00
|
|
|
#include <asm/stacktrace.h>
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* We abuse bit 3 from flags to pass exact information, see perf_misc_flags
|
|
|
|
|
* and the comment with PERF_EFLAGS_EXACT.
|
|
|
|
|
*/
|
|
|
|
|
#define perf_arch_fetch_caller_regs(regs, __ip) { \
|
|
|
|
|
(regs)->ip = (__ip); \
|
|
|
|
|
(regs)->bp = caller_frame_pointer(); \
|
|
|
|
|
(regs)->cs = __KERNEL_CS; \
|
|
|
|
|
regs->flags = 0; \
|
2011-07-02 07:00:52 -06:00
|
|
|
asm volatile( \
|
|
|
|
|
_ASM_MOV "%%"_ASM_SP ", %0\n" \
|
|
|
|
|
: "=m" ((regs)->sp) \
|
|
|
|
|
:: "memory" \
|
|
|
|
|
); \
|
2010-05-19 23:47:21 -06:00
|
|
|
}
|
|
|
|
|
|
2011-10-05 06:01:21 -06:00
|
|
|
struct perf_guest_switch_msr {
|
|
|
|
|
unsigned msr;
|
|
|
|
|
u64 host, guest;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
extern struct perf_guest_switch_msr *perf_guest_get_msrs(int *nr);
|
2011-11-10 05:57:27 -07:00
|
|
|
extern void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap);
|
2012-06-08 06:50:50 -06:00
|
|
|
extern void perf_check_microcode(void);
|
2018-09-19 11:29:07 -06:00
|
|
|
extern int x86_perf_rdpmc_index(struct perf_event *event);
|
2008-12-03 02:39:53 -07:00
|
|
|
#else
|
2012-07-16 20:14:41 -06:00
|
|
|
static inline struct perf_guest_switch_msr *perf_guest_get_msrs(int *nr)
|
2011-10-05 06:01:21 -06:00
|
|
|
{
|
|
|
|
|
*nr = 0;
|
|
|
|
|
return NULL;
|
|
|
|
|
}
|
|
|
|
|
|
2011-11-10 05:57:27 -07:00
|
|
|
static inline void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap)
|
|
|
|
|
{
|
|
|
|
|
memset(cap, 0, sizeof(*cap));
|
|
|
|
|
}
|
|
|
|
|
|
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 04:02:48 -06:00
|
|
|
static inline void perf_events_lapic_init(void) { }
|
2012-06-08 06:50:50 -06:00
|
|
|
static inline void perf_check_microcode(void) { }
|
2008-12-03 02:39:53 -07:00
|
|
|
#endif
|
|
|
|
|
|
2016-03-29 08:43:10 -06:00
|
|
|
#ifdef CONFIG_CPU_SUP_INTEL
|
|
|
|
|
extern void intel_pt_handle_vmx(int on);
|
|
|
|
|
#endif
|
|
|
|
|
|
2012-02-29 06:57:32 -07:00
|
|
|
#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD)
|
|
|
|
|
extern void amd_pmu_enable_virt(void);
|
|
|
|
|
extern void amd_pmu_disable_virt(void);
|
|
|
|
|
#else
|
|
|
|
|
static inline void amd_pmu_enable_virt(void) { }
|
|
|
|
|
static inline void amd_pmu_disable_virt(void) { }
|
|
|
|
|
#endif
|
|
|
|
|
|
2012-08-07 07:20:38 -06:00
|
|
|
#define arch_perf_out_copy_user copy_from_user_nmi
|
|
|
|
|
|
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 04:02:48 -06:00
|
|
|
#endif /* _ASM_X86_PERF_EVENT_H */
|