arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31 01:36:42 -06:00
|
|
|
/*
|
|
|
|
* Copyright 2017 Sean Wang <sean.wang@mediatek.com>
|
|
|
|
*
|
|
|
|
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
|
|
*/
|
|
|
|
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
#include "mt7623.dtsi"
|
|
|
|
#include "mt6323.dtsi"
|
|
|
|
|
|
|
|
/ {
|
|
|
|
model = "Bananapi BPI-R2";
|
|
|
|
compatible = "bananapi,bpi-r2", "mediatek,mt7623";
|
|
|
|
|
|
|
|
aliases {
|
|
|
|
serial2 = &uart2;
|
|
|
|
};
|
|
|
|
|
|
|
|
chosen {
|
|
|
|
stdout-path = "serial2:115200n8";
|
|
|
|
};
|
|
|
|
|
|
|
|
cpus {
|
|
|
|
cpu@0 {
|
|
|
|
proc-supply = <&mt6323_vproc_reg>;
|
|
|
|
};
|
|
|
|
|
|
|
|
cpu@1 {
|
|
|
|
proc-supply = <&mt6323_vproc_reg>;
|
|
|
|
};
|
|
|
|
|
|
|
|
cpu@2 {
|
|
|
|
proc-supply = <&mt6323_vproc_reg>;
|
|
|
|
};
|
|
|
|
|
|
|
|
cpu@3 {
|
|
|
|
proc-supply = <&mt6323_vproc_reg>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
gpio_keys {
|
|
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&key_pins_a>;
|
|
|
|
|
|
|
|
factory {
|
|
|
|
label = "factory";
|
|
|
|
linux,code = <BTN_0>;
|
|
|
|
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
|
|
|
|
};
|
|
|
|
|
|
|
|
wps {
|
|
|
|
label = "wps";
|
|
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
|
|
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
leds {
|
|
|
|
compatible = "gpio-leds";
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&led_pins_a>;
|
|
|
|
|
2017-08-03 21:59:35 -06:00
|
|
|
blue {
|
|
|
|
label = "bpi-r2:pio:blue";
|
|
|
|
gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
|
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31 01:36:42 -06:00
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
|
|
|
|
green {
|
|
|
|
label = "bpi-r2:pio:green";
|
|
|
|
gpios = <&pio 240 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
|
2017-08-03 21:59:35 -06:00
|
|
|
red {
|
|
|
|
label = "bpi-r2:pio:red";
|
|
|
|
gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
|
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31 01:36:42 -06:00
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
memory@80000000 {
|
|
|
|
reg = <0 0x80000000 0 0x40000000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&cir {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&cir_pins_a>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&crypto {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
ð {
|
|
|
|
status = "okay";
|
2017-08-03 21:59:35 -06:00
|
|
|
|
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31 01:36:42 -06:00
|
|
|
gmac0: mac@0 {
|
|
|
|
compatible = "mediatek,eth-mac";
|
|
|
|
reg = <0>;
|
|
|
|
phy-mode = "trgmii";
|
2017-08-03 21:59:35 -06:00
|
|
|
|
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31 01:36:42 -06:00
|
|
|
fixed-link {
|
|
|
|
speed = <1000>;
|
|
|
|
full-duplex;
|
|
|
|
pause;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
mdio: mdio-bus {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
2017-08-03 21:59:35 -06:00
|
|
|
|
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31 01:36:42 -06:00
|
|
|
switch@0 {
|
|
|
|
compatible = "mediatek,mt7530";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
reg = <0>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
reset-gpios = <&pio 33 0>;
|
|
|
|
core-supply = <&mt6323_vpa_reg>;
|
|
|
|
io-supply = <&mt6323_vemc3v3_reg>;
|
|
|
|
|
|
|
|
ports {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
reg = <0>;
|
2017-08-03 21:59:35 -06:00
|
|
|
|
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31 01:36:42 -06:00
|
|
|
port@0 {
|
|
|
|
reg = <0>;
|
|
|
|
label = "wan";
|
|
|
|
};
|
|
|
|
|
|
|
|
port@1 {
|
|
|
|
reg = <1>;
|
|
|
|
label = "lan0";
|
|
|
|
};
|
|
|
|
|
|
|
|
port@2 {
|
|
|
|
reg = <2>;
|
|
|
|
label = "lan1";
|
|
|
|
};
|
|
|
|
|
|
|
|
port@3 {
|
|
|
|
reg = <3>;
|
|
|
|
label = "lan2";
|
|
|
|
};
|
|
|
|
|
|
|
|
port@4 {
|
|
|
|
reg = <4>;
|
|
|
|
label = "lan3";
|
|
|
|
};
|
|
|
|
|
|
|
|
port@6 {
|
|
|
|
reg = <6>;
|
|
|
|
label = "cpu";
|
|
|
|
ethernet = <&gmac0>;
|
|
|
|
phy-mode = "trgmii";
|
2017-08-03 21:59:35 -06:00
|
|
|
|
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31 01:36:42 -06:00
|
|
|
fixed-link {
|
|
|
|
speed = <1000>;
|
|
|
|
full-duplex;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c0 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&i2c0_pins_a>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c1 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&i2c1_pins_a>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2017-08-03 21:59:34 -06:00
|
|
|
&mmc0 {
|
|
|
|
pinctrl-names = "default", "state_uhs";
|
|
|
|
pinctrl-0 = <&mmc0_pins_default>;
|
|
|
|
pinctrl-1 = <&mmc0_pins_uhs>;
|
|
|
|
status = "okay";
|
|
|
|
bus-width = <8>;
|
|
|
|
max-frequency = <50000000>;
|
|
|
|
cap-mmc-highspeed;
|
|
|
|
vmmc-supply = <&mt6323_vemc3v3_reg>;
|
|
|
|
vqmmc-supply = <&mt6323_vio18_reg>;
|
|
|
|
non-removable;
|
|
|
|
};
|
|
|
|
|
|
|
|
&mmc1 {
|
|
|
|
pinctrl-names = "default", "state_uhs";
|
|
|
|
pinctrl-0 = <&mmc1_pins_default>;
|
|
|
|
pinctrl-1 = <&mmc1_pins_uhs>;
|
|
|
|
status = "okay";
|
|
|
|
bus-width = <4>;
|
|
|
|
max-frequency = <50000000>;
|
|
|
|
cap-sd-highspeed;
|
|
|
|
cd-gpios = <&pio 261 0>;
|
|
|
|
vmmc-supply = <&mt6323_vmch_reg>;
|
|
|
|
vqmmc-supply = <&mt6323_vio18_reg>;
|
|
|
|
};
|
|
|
|
|
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31 01:36:42 -06:00
|
|
|
&pio {
|
|
|
|
cir_pins_a:cir@0 {
|
|
|
|
pins_cir {
|
|
|
|
pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
|
|
|
|
bias-disable;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
i2c0_pins_a: i2c@0 {
|
|
|
|
pins_i2c0 {
|
|
|
|
pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
|
|
|
|
<MT7623_PIN_76_SCL0_FUNC_SCL0>;
|
|
|
|
bias-disable;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
i2c1_pins_a: i2c@1 {
|
|
|
|
pin_i2c1 {
|
|
|
|
pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
|
|
|
|
<MT7623_PIN_58_SCL1_FUNC_SCL1>;
|
|
|
|
bias-disable;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
i2s0_pins_a: i2s@0 {
|
|
|
|
pin_i2s0 {
|
|
|
|
pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
|
|
|
|
<MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
|
|
|
|
<MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
|
|
|
|
<MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>,
|
|
|
|
<MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>;
|
|
|
|
drive-strength = <MTK_DRIVE_12mA>;
|
|
|
|
bias-pull-down;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
i2s1_pins_a: i2s@1 {
|
|
|
|
pin_i2s1 {
|
|
|
|
pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
|
|
|
|
<MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
|
|
|
|
<MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
|
|
|
|
<MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>,
|
|
|
|
<MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>;
|
|
|
|
drive-strength = <MTK_DRIVE_12mA>;
|
|
|
|
bias-pull-down;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
key_pins_a: keys@0 {
|
|
|
|
pins_keys {
|
|
|
|
pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
|
|
|
|
<MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
|
|
|
|
input-enable;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
led_pins_a: leds@0 {
|
|
|
|
pins_leds {
|
|
|
|
pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
|
|
|
|
<MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
|
|
|
|
<MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
mmc0_pins_default: mmc0default {
|
|
|
|
pins_cmd_dat {
|
|
|
|
pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
|
|
|
|
<MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
|
|
|
|
<MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
|
|
|
|
<MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
|
|
|
|
<MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
|
|
|
|
<MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
|
|
|
|
<MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
|
|
|
|
<MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
|
|
|
|
<MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
|
|
|
|
input-enable;
|
|
|
|
bias-pull-up;
|
|
|
|
};
|
|
|
|
|
|
|
|
pins_clk {
|
|
|
|
pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
|
|
|
|
bias-pull-down;
|
|
|
|
};
|
|
|
|
|
|
|
|
pins_rst {
|
|
|
|
pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
|
|
|
|
bias-pull-up;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
mmc0_pins_uhs: mmc0 {
|
|
|
|
pins_cmd_dat {
|
|
|
|
pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
|
|
|
|
<MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
|
|
|
|
<MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
|
|
|
|
<MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
|
|
|
|
<MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
|
|
|
|
<MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
|
|
|
|
<MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
|
|
|
|
<MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
|
|
|
|
<MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
|
|
|
|
input-enable;
|
|
|
|
drive-strength = <MTK_DRIVE_2mA>;
|
|
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pins_clk {
|
|
|
|
pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
|
|
|
|
drive-strength = <MTK_DRIVE_2mA>;
|
|
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pins_rst {
|
|
|
|
pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
|
|
|
|
bias-pull-up;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
mmc1_pins_default: mmc1default {
|
|
|
|
pins_cmd_dat {
|
|
|
|
pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
|
|
|
|
<MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
|
|
|
|
<MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
|
|
|
|
<MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
|
|
|
|
<MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
|
|
|
|
input-enable;
|
|
|
|
drive-strength = <MTK_DRIVE_4mA>;
|
|
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pins_clk {
|
|
|
|
pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
|
|
|
|
bias-pull-down;
|
|
|
|
drive-strength = <MTK_DRIVE_4mA>;
|
|
|
|
};
|
2017-08-03 21:59:34 -06:00
|
|
|
|
|
|
|
pins_wp {
|
|
|
|
pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>;
|
|
|
|
input-enable;
|
|
|
|
bias-pull-up;
|
|
|
|
};
|
|
|
|
|
|
|
|
pins_insert {
|
|
|
|
pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>;
|
|
|
|
bias-pull-up;
|
|
|
|
};
|
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31 01:36:42 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
mmc1_pins_uhs: mmc1 {
|
|
|
|
pins_cmd_dat {
|
|
|
|
pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
|
|
|
|
<MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
|
|
|
|
<MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
|
|
|
|
<MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
|
|
|
|
<MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
|
|
|
|
input-enable;
|
|
|
|
drive-strength = <MTK_DRIVE_4mA>;
|
|
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pins_clk {
|
|
|
|
pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
|
|
|
|
drive-strength = <MTK_DRIVE_4mA>;
|
|
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
pwm_pins_a: pwm@0 {
|
|
|
|
pins_pwm {
|
|
|
|
pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
|
|
|
|
<MT7623_PIN_204_PWM1_FUNC_PWM1>,
|
|
|
|
<MT7623_PIN_205_PWM2_FUNC_PWM2>,
|
|
|
|
<MT7623_PIN_206_PWM3_FUNC_PWM3>,
|
|
|
|
<MT7623_PIN_207_PWM4_FUNC_PWM4>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2017-08-03 21:59:35 -06:00
|
|
|
spi0_pins_a: spi@0 {
|
|
|
|
pins_spi {
|
|
|
|
pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
|
|
|
|
<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
|
|
|
|
<MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
|
|
|
|
<MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
|
|
|
|
bias-disable;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31 01:36:42 -06:00
|
|
|
uart0_pins_a: uart@0 {
|
|
|
|
pins_dat {
|
|
|
|
pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
|
|
|
|
<MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
uart1_pins_a: uart@1 {
|
|
|
|
pins_dat {
|
|
|
|
pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
|
|
|
|
<MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&pwm {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pwm_pins_a>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&pwrap {
|
|
|
|
mt6323 {
|
|
|
|
mt6323led: led {
|
|
|
|
compatible = "mediatek,mt6323-led";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
led@0 {
|
|
|
|
reg = <0>;
|
|
|
|
label = "bpi-r2:isink:green";
|
|
|
|
default-state = "off";
|
|
|
|
};
|
2017-08-03 21:59:35 -06:00
|
|
|
|
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31 01:36:42 -06:00
|
|
|
led@1 {
|
|
|
|
reg = <1>;
|
|
|
|
label = "bpi-r2:isink:red";
|
|
|
|
default-state = "off";
|
|
|
|
};
|
2017-08-03 21:59:35 -06:00
|
|
|
|
arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board
Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-07-31 01:36:42 -06:00
|
|
|
led@2 {
|
|
|
|
reg = <2>;
|
|
|
|
label = "bpi-r2:isink:blue";
|
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&spi0 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&spi0_pins_a>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart0 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&uart0_pins_a>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart1 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&uart1_pins_a>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart2 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb1 {
|
|
|
|
vusb33-supply = <&mt6323_vusb_reg>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb2 {
|
|
|
|
vusb33-supply = <&mt6323_vusb_reg>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
2017-08-03 21:59:35 -06:00
|
|
|
|
|
|
|
&u3phy1 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&u3phy2 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|