Linux 4.0-rc7

-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVIws/AAoJEHm+PkMAQRiGwEcH/1GCBqrBzXaKwDdCPMRcYVUb
 MYkXmGkCGRYWe5MXI8QNAaa/CdG6mAFMHWN6CaMMpLTxnM1m87uBg01fQMsh73BO
 mRVLKE/soiJDnR1gYzBBDBYV/AUvytN5PhgeNaA95YIJvU3T1f3iTnV8vs30Dp0L
 YpxSqwr3C0k7C9IE0VcgfzvWJPCnQ9IWHuX3jn5s1XjGKVNbBYHMt6FusHdyXMfT
 dp8ksuGHwm30mTFI5xJpKOrRzfi+P5EsEUrsnFRPRM/iFTVrM5R7eaUhsRZb2+Wo
 YApnbYhUYz7om1AuQ+UZ/+S6y7ZLlGWegI1lWI754GIsczG5vPHEYhhgkzMhTsc=
 =kR1V
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc7' into drm-next

Linux 4.0-rc7

Requested by Alex for fixes -next needs.

Conflicts:
	drivers/gpu/drm/i915/intel_sprite.c

Documentation/devicetree/bindings/net/dsa/dsa.txt

@@ -19,7 +19,9 @@ the parent DSA node. The maximum number of allowed child nodes is 4
 (DSA_MAX_SWITCHES).
 Each of these switch child nodes should have the following required properties:
 
-- reg			: Describes the switch address on the MII bus
+- reg			: Contains two fields. The first one describes the
+			  address on the MII bus. The second is the switch
+			  number that must be unique in cascaded configurations
 - #address-cells	: Must be 1
 - #size-cells		: Must be 0
 

Documentation/input/alps.txt

@@ -114,6 +114,9 @@ ALPS Absolute Mode - Protocol Version 2
  byte 4:  0   y6   y5   y4   y3   y2   y1   y0
  byte 5:  0   z6   z5   z4   z3   z2   z1   z0
 
+Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for
+the DualPoint Stick.
+
 Dualpoint device -- interleaved packet format
 ---------------------------------------------
 
@@ -127,6 +130,11 @@ Dualpoint device -- interleaved packet format
  byte 7:    0   y6   y5   y4   y3   y2   y1   y0
  byte 8:    0   z6   z5   z4   z3   z2   z1   z0
 
+Devices which use the interleaving format normally send standard PS/2 mouse
+packets for the DualPoint Stick + ALPS Absolute Mode packets for the
+touchpad, switching to the interleaved packet format when both the stick and
+the touchpad are used at the same time.
+
 ALPS Absolute Mode - Protocol Version 3
 ---------------------------------------
 

Documentation/input/event-codes.txt

@@ -294,6 +294,12 @@ accordingly. This property does not affect kernel behavior.
 The kernel does not provide button emulation for such devices but treats
 them as any other INPUT_PROP_BUTTONPAD device.
 
+INPUT_PROP_ACCELEROMETER
+-------------------------
+Directional axes on this device (absolute and/or relative x, y, z) represent
+accelerometer data. All other axes retain their meaning. A device must not mix
+regular directional axes and accelerometer axes on the same event node.
+
 Guidelines:
 ==========
 The guidelines below ensure proper single-touch and multi-finger functionality.

Documentation/input/multi-touch-protocol.txt

@@ -312,9 +312,12 @@ ABS_MT_TOOL_TYPE
 
 The type of approaching tool. A lot of kernel drivers cannot distinguish
 between different tool types, such as a finger or a pen. In such cases, the
-event should be omitted. The protocol currently supports MT_TOOL_FINGER and
+event should be omitted. The protocol currently supports MT_TOOL_FINGER,
-MT_TOOL_PEN [2]. For type B devices, this event is handled by input core;
+MT_TOOL_PEN, and MT_TOOL_PALM [2]. For type B devices, this event is handled
-drivers should instead use input_mt_report_slot_state().
+by input core; drivers should instead use input_mt_report_slot_state().
+A contact's ABS_MT_TOOL_TYPE may change over time while still touching the
+device, because the firmware may not be able to determine which tool is being
+used when it first appears.
 
 ABS_MT_BLOB_ID
 

MAINTAINERS

@@ -637,8 +637,7 @@ F:      drivers/gpu/drm/radeon/radeon_kfd.h
 F:      include/uapi/linux/kfd_ioctl.h
 
 AMD MICROCODE UPDATE SUPPORT
-M:	Andreas Herrmann <herrmann.der.user@googlemail.com>
+M:	Borislav Petkov <bp@alien8.de>
-L:	amd64-microcode@amd64.org
 S:	Maintained
 F:	arch/x86/kernel/cpu/microcode/amd*
 
@@ -5094,7 +5093,7 @@ S:	Supported
 F:	drivers/platform/x86/intel_menlow.c
 
 INTEL IA32 MICROCODE UPDATE SUPPORT
-M:	Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
+M:	Borislav Petkov <bp@alien8.de>
 S:	Maintained
 F:	arch/x86/kernel/cpu/microcode/core*
 F:	arch/x86/kernel/cpu/microcode/intel*
@@ -5135,22 +5134,21 @@ M:	Deepak Saxena <dsaxena@plexity.net>
 S:	Maintained
 F:	drivers/char/hw_random/ixp4xx-rng.c
 
-INTEL ETHERNET DRIVERS (e100/e1000/e1000e/fm10k/igb/igbvf/ixgb/ixgbe/ixgbevf/i40e/i40evf)
+INTEL ETHERNET DRIVERS
 M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-M:	Jesse Brandeburg <jesse.brandeburg@intel.com>
+R:	Jesse Brandeburg <jesse.brandeburg@intel.com>
-M:	Bruce Allan <bruce.w.allan@intel.com>
+R:	Shannon Nelson <shannon.nelson@intel.com>
-M:	Carolyn Wyborny <carolyn.wyborny@intel.com>
+R:	Carolyn Wyborny <carolyn.wyborny@intel.com>
-M:	Don Skidmore <donald.c.skidmore@intel.com>
+R:	Don Skidmore <donald.c.skidmore@intel.com>
-M:	Greg Rose <gregory.v.rose@intel.com>
+R:	Matthew Vick <matthew.vick@intel.com>
-M:	Matthew Vick <matthew.vick@intel.com>
+R:	John Ronciak <john.ronciak@intel.com>
-M:	John Ronciak <john.ronciak@intel.com>
+R:	Mitch Williams <mitch.a.williams@intel.com>
-M:	Mitch Williams <mitch.a.williams@intel.com>
+L:	intel-wired-lan@lists.osuosl.org
-M:	Linux NICS <linux.nics@intel.com>
-L:	e1000-devel@lists.sourceforge.net
 W:	http://www.intel.com/support/feedback.htm
 W:	http://e1000.sourceforge.net/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net.git
+Q:	http://patchwork.ozlabs.org/project/intel-wired-lan/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue.git
 S:	Supported
 F:	Documentation/networking/e100.txt
 F:	Documentation/networking/e1000.txt

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*

arch/powerpc/include/asm/cputhreads.h

@@ -55,7 +55,7 @@ static inline cpumask_t cpu_thread_mask_to_cores(const struct cpumask *threads)
 
 static inline int cpu_nr_cores(void)
 {
-	return NR_CPUS >> threads_shift;
+	return nr_cpu_ids >> threads_shift;
 }
 
 static inline cpumask_t cpu_online_cores_map(void)

arch/x86/kernel/cpu/perf_event_intel.c

@@ -212,11 +212,11 @@ static struct event_constraint intel_hsw_event_constraints[] = {
 	INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PREC_DIST */
 	INTEL_EVENT_CONSTRAINT(0xcd, 0x8), /* MEM_TRANS_RETIRED.LOAD_LATENCY */
 	/* CYCLE_ACTIVITY.CYCLES_L1D_PENDING */
-	INTEL_EVENT_CONSTRAINT(0x08a3, 0x4),
+	INTEL_UEVENT_CONSTRAINT(0x08a3, 0x4),
 	/* CYCLE_ACTIVITY.STALLS_L1D_PENDING */
-	INTEL_EVENT_CONSTRAINT(0x0ca3, 0x4),
+	INTEL_UEVENT_CONSTRAINT(0x0ca3, 0x4),
 	/* CYCLE_ACTIVITY.CYCLES_NO_EXECUTE */
-	INTEL_EVENT_CONSTRAINT(0x04a3, 0xf),
+	INTEL_UEVENT_CONSTRAINT(0x04a3, 0xf),
 	EVENT_CONSTRAINT_END
 };
 
@@ -1649,11 +1649,11 @@ intel_get_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event
 	if (c)
 		return c;
 
-	c = intel_pebs_constraints(event);
+	c = intel_shared_regs_constraints(cpuc, event);
 	if (c)
 		return c;
 
-	c = intel_shared_regs_constraints(cpuc, event);
+	c = intel_pebs_constraints(event);
 	if (c)
 		return c;
 

arch/x86/kernel/entry_64.S

@@ -799,7 +799,21 @@ retint_swapgs:		/* return to user-space */
 	cmpq %r11,(EFLAGS-ARGOFFSET)(%rsp)	/* R11 == RFLAGS */
 	jne opportunistic_sysret_failed
 
-	testq $X86_EFLAGS_RF,%r11		/* sysret can't restore RF */
+	/*
+	 * SYSRET can't restore RF.  SYSRET can restore TF, but unlike IRET,
+	 * restoring TF results in a trap from userspace immediately after
+	 * SYSRET.  This would cause an infinite loop whenever #DB happens
+	 * with register state that satisfies the opportunistic SYSRET
+	 * conditions.  For example, single-stepping this user code:
+	 *
+	 *           movq $stuck_here,%rcx
+	 *           pushfq
+	 *           popq %r11
+	 *   stuck_here:
+	 *
+	 * would never get past 'stuck_here'.
+	 */
+	testq $(X86_EFLAGS_RF|X86_EFLAGS_TF), %r11
 	jnz opportunistic_sysret_failed
 
 	/* nothing to check for RSP */

arch/x86/kernel/kgdb.c

@@ -72,7 +72,7 @@ struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] =
 	{ "bx", 8, offsetof(struct pt_regs, bx) },
 	{ "cx", 8, offsetof(struct pt_regs, cx) },
 	{ "dx", 8, offsetof(struct pt_regs, dx) },
-	{ "si", 8, offsetof(struct pt_regs, dx) },
+	{ "si", 8, offsetof(struct pt_regs, si) },
 	{ "di", 8, offsetof(struct pt_regs, di) },
 	{ "bp", 8, offsetof(struct pt_regs, bp) },
 	{ "sp", 8, offsetof(struct pt_regs, sp) },

arch/x86/kernel/reboot.c

@@ -183,6 +183,16 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 		},
 	},
 
+	/* ASRock */
+	{	/* Handle problems with rebooting on ASRock Q1900DC-ITX */
+		.callback = set_pci_reboot,
+		.ident = "ASRock Q1900DC-ITX",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASRock"),
+			DMI_MATCH(DMI_BOARD_NAME, "Q1900DC-ITX"),
+		},
+	},
+
 	/* ASUS */
 	{	/* Handle problems with rebooting on ASUS P4S800 */
 		.callback = set_bios_reboot,

arch/x86/xen/p2m.c

@@ -91,6 +91,12 @@ EXPORT_SYMBOL_GPL(xen_p2m_size);
 unsigned long xen_max_p2m_pfn __read_mostly;
 EXPORT_SYMBOL_GPL(xen_max_p2m_pfn);
 
+#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG_LIMIT
+#define P2M_LIMIT CONFIG_XEN_BALLOON_MEMORY_HOTPLUG_LIMIT
+#else
+#define P2M_LIMIT 0
+#endif
+
 static DEFINE_SPINLOCK(p2m_update_lock);
 
 static unsigned long *p2m_mid_missing_mfn;
@@ -385,9 +391,11 @@ static void __init xen_rebuild_p2m_list(unsigned long *p2m)
 void __init xen_vmalloc_p2m_tree(void)
 {
 	static struct vm_struct vm;
+	unsigned long p2m_limit;
 
+	p2m_limit = (phys_addr_t)P2M_LIMIT * 1024 * 1024 * 1024 / PAGE_SIZE;
 	vm.flags = VM_ALLOC;
-	vm.size = ALIGN(sizeof(unsigned long) * xen_max_p2m_pfn,
+	vm.size = ALIGN(sizeof(unsigned long) * max(xen_max_p2m_pfn, p2m_limit),
 			PMD_SIZE * PMDS_PER_MID_PAGE);
 	vm_area_register_early(&vm, PMD_SIZE * PMDS_PER_MID_PAGE);
 	pr_notice("p2m virtual area at %p, size is %lx\n", vm.addr, vm.size);

block/blk-settings.c

@@ -585,7 +585,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 				     b->physical_block_size);
 
 	t->io_min = max(t->io_min, b->io_min);
-	t->io_opt = lcm(t->io_opt, b->io_opt);
+	t->io_opt = lcm_not_zero(t->io_opt, b->io_opt);
 
 	t->cluster &= b->cluster;
 	t->discard_zeroes_data &= b->discard_zeroes_data;
@@ -616,7 +616,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 		    b->raid_partial_stripes_expensive);
 
 	/* Find lowest common alignment_offset */
-	t->alignment_offset = lcm(t->alignment_offset, alignment)
+	t->alignment_offset = lcm_not_zero(t->alignment_offset, alignment)
 		% max(t->physical_block_size, t->io_min);
 
 	/* Verify that new alignment_offset is on a logical block boundary */
@@ -643,7 +643,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 						      b->max_discard_sectors);
 		t->discard_granularity = max(t->discard_granularity,
 					     b->discard_granularity);
-		t->discard_alignment = lcm(t->discard_alignment, alignment) %
+		t->discard_alignment = lcm_not_zero(t->discard_alignment, alignment) %
 			t->discard_granularity;
 	}
 

drivers/ata/libata-core.c

@@ -4204,9 +4204,18 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
 	/* devices that don't properly handle queued TRIM commands */
-	{ "Micron_M[56]*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+	{ "Micron_M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "Crucial_CT*M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "Micron_M5[15]0*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "Crucial_CT*M550*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "Crucial_CT*MX100*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "Samsung SSD 850 PRO*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
-	{ "Crucial_CT*SSD*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM, },
 
 	/*
 	 * As defined, the DRAT (Deterministic Read After Trim) and RZAT
@@ -4226,6 +4235,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	 */
 	{ "INTEL*SSDSC2MH*",		NULL,	0, },
 
+	{ "Micron*",			NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "Crucial*",			NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "INTEL*SSD*", 		NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "SSD*INTEL*",			NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Samsung*SSD*",		NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM, },

drivers/dma/bcm2835-dma.c

@@ -475,6 +475,7 @@ static int bcm2835_dma_terminate_all(struct dma_chan *chan)
 	 * c->desc is NULL and exit.)
 	 */
 	if (c->desc) {
+		bcm2835_dma_desc_free(&c->desc->vd);
 		c->desc = NULL;
 		bcm2835_dma_abort(c->chan_base);
 

drivers/dma/dma-jz4740.c

@@ -511,6 +511,9 @@ static void jz4740_dma_desc_free(struct virt_dma_desc *vdesc)
 	kfree(container_of(vdesc, struct jz4740_dma_desc, vdesc));
 }
 
+#define JZ4740_DMA_BUSWIDTHS (BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
+	BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
+
 static int jz4740_dma_probe(struct platform_device *pdev)
 {
 	struct jz4740_dmaengine_chan *chan;
@@ -548,6 +551,10 @@ static int jz4740_dma_probe(struct platform_device *pdev)
 	dd->device_prep_dma_cyclic = jz4740_dma_prep_dma_cyclic;
 	dd->device_config = jz4740_dma_slave_config;
 	dd->device_terminate_all = jz4740_dma_terminate_all;
+	dd->src_addr_widths = JZ4740_DMA_BUSWIDTHS;
+	dd->dst_addr_widths = JZ4740_DMA_BUSWIDTHS;
+	dd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+	dd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
 	dd->dev = &pdev->dev;
 	INIT_LIST_HEAD(&dd->channels);
 

drivers/dma/edma.c

@@ -260,6 +260,13 @@ static int edma_terminate_all(struct dma_chan *chan)
 	 */
 	if (echan->edesc) {
 		int cyclic = echan->edesc->cyclic;
+
+		/*
+		 * free the running request descriptor
+		 * since it is not in any of the vdesc lists
+		 */
+		edma_desc_free(&echan->edesc->vdesc);
+
 		echan->edesc = NULL;
 		edma_stop(echan->ch_num);
 		/* Move the cyclic channel back to default queue */

drivers/dma/moxart-dma.c

@@ -193,8 +193,10 @@ static int moxart_terminate_all(struct dma_chan *chan)
 
 	spin_lock_irqsave(&ch->vc.lock, flags);
 
-	if (ch->desc)
+	if (ch->desc) {
+		moxart_dma_desc_free(&ch->desc->vd);
 		ch->desc = NULL;
+	}
 
 	ctrl = readl(ch->base + REG_OFF_CTRL);
 	ctrl &= ~(APB_DMA_ENABLE | APB_DMA_FIN_INT_EN | APB_DMA_ERR_INT_EN);

drivers/dma/omap-dma.c

@@ -981,6 +981,7 @@ static int omap_dma_terminate_all(struct dma_chan *chan)
 	 * c->desc is NULL and exit.)
 	 */
 	if (c->desc) {
+		omap_dma_desc_free(&c->desc->vd);
 		c->desc = NULL;
 		/* Avoid stopping the dma twice */
 		if (!c->paused)

drivers/firmware/dmi_scan.c

@@ -86,10 +86,13 @@ static void dmi_table(u8 *buf, u32 len, int num,
 	int i = 0;
 
 	/*
-	 *	Stop when we see all the items the table claimed to have
+	 * Stop when we have seen all the items the table claimed to have
-	 *	OR we run off the end of the table (also happens)
+	 * (SMBIOS < 3.0 only) OR we reach an end-of-table marker OR we run
+	 * off the end of the table (should never happen but sometimes does
+	 * on bogus implementations.)
 	 */
-	while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) {
+	while ((!num || i < num) &&
+	       (data - buf + sizeof(struct dmi_header)) <= len) {
 		const struct dmi_header *dm = (const struct dmi_header *)data;
 
 		/*
@@ -529,21 +532,10 @@ static int __init dmi_smbios3_present(const u8 *buf)
 	if (memcmp(buf, "_SM3_", 5) == 0 &&
 	    buf[6] < 32 && dmi_checksum(buf, buf[6])) {
 		dmi_ver = get_unaligned_be16(buf + 7);
+		dmi_num = 0;			/* No longer specified */
 		dmi_len = get_unaligned_le32(buf + 12);
 		dmi_base = get_unaligned_le64(buf + 16);
 
-		/*
-		 * The 64-bit SMBIOS 3.0 entry point no longer has a field
-		 * containing the number of structures present in the table.
-		 * Instead, it defines the table size as a maximum size, and
-		 * relies on the end-of-table structure type (#127) to be used
-		 * to signal the end of the table.
-		 * So let's define dmi_num as an upper bound as well: each
-		 * structure has a 4 byte header, so dmi_len / 4 is an upper
-		 * bound for the number of structures in the table.
-		 */
-		dmi_num = dmi_len / 4;
-
 		if (dmi_walk_early(dmi_decode) == 0) {
 			pr_info("SMBIOS %d.%d present.\n",
 				dmi_ver >> 8, dmi_ver & 0xFF);

drivers/gpio/gpio-mpc8xxx.c

@@ -334,7 +334,7 @@ static struct irq_domain_ops mpc8xxx_gpio_irq_ops = {
 	.xlate	= irq_domain_xlate_twocell,
 };
 
-static struct of_device_id mpc8xxx_gpio_ids[] __initdata = {
+static struct of_device_id mpc8xxx_gpio_ids[] = {
 	{ .compatible = "fsl,mpc8349-gpio", },
 	{ .compatible = "fsl,mpc8572-gpio", },
 	{ .compatible = "fsl,mpc8610-gpio", },

drivers/gpio/gpio-syscon.c

@@ -219,7 +219,7 @@ static int syscon_gpio_probe(struct platform_device *pdev)
 		ret = of_property_read_u32_index(np, "gpio,syscon-dev", 2,
 						 &priv->dir_reg_offset);
 		if (ret)
-			dev_err(dev, "can't read the dir register offset!\n");
+			dev_dbg(dev, "can't read the dir register offset!\n");
 
 		priv->dir_reg_offset <<= 3;
 	}

drivers/gpio/gpiolib-acpi.c

@@ -201,6 +201,10 @@ static acpi_status acpi_gpiochip_request_interrupt(struct acpi_resource *ares,
 	if (!handler)
 		return AE_BAD_PARAMETER;
 
+	pin = acpi_gpiochip_pin_to_gpio_offset(chip, pin);
+	if (pin < 0)
+		return AE_BAD_PARAMETER;
+
 	desc = gpiochip_request_own_desc(chip, pin, "ACPI:Event");
 	if (IS_ERR(desc)) {
 		dev_err(chip->dev, "Failed to request GPIO\n");
@@ -551,6 +555,12 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
 		struct gpio_desc *desc;
 		bool found;
 
+		pin = acpi_gpiochip_pin_to_gpio_offset(chip, pin);
+		if (pin < 0) {
+			status = AE_BAD_PARAMETER;
+			goto out;
+		}
+
 		mutex_lock(&achip->conn_lock);
 
 		found = false;

drivers/gpu/drm/drm_edid_load.c

@@ -287,6 +287,7 @@ int drm_load_edid_firmware(struct drm_connector *connector)
 
 	drm_mode_connector_update_edid_property(connector, edid);
 	ret = drm_add_edid_modes(connector, edid);
+	drm_edid_to_eld(connector, edid);
 	kfree(edid);
 
 	return ret;

drivers/gpu/drm/drm_probe_helper.c

@@ -174,6 +174,7 @@ static int drm_helper_probe_single_connector_modes_merge_bits(struct drm_connect
 			struct edid *edid = (struct edid *) connector->edid_blob_ptr->data;
 
 			count = drm_add_edid_modes(connector, edid);
+			drm_edid_to_eld(connector, edid);
 		} else
 			count = (*connector_funcs->get_modes)(connector);
 	}

drivers/gpu/drm/exynos/exynos_drm_fimd.c

@@ -147,6 +147,7 @@ struct fimd_win_data {
 	unsigned int		ovl_height;
 	unsigned int		fb_width;
 	unsigned int		fb_height;
+	unsigned int		fb_pitch;
 	unsigned int		bpp;
 	unsigned int		pixel_format;
 	dma_addr_t		dma_addr;
@@ -532,13 +533,14 @@ static void fimd_win_mode_set(struct exynos_drm_crtc *crtc,
 	win_data->offset_y = plane->crtc_y;
 	win_data->ovl_width = plane->crtc_width;
 	win_data->ovl_height = plane->crtc_height;
+	win_data->fb_pitch = plane->pitch;
 	win_data->fb_width = plane->fb_width;
 	win_data->fb_height = plane->fb_height;
 	win_data->dma_addr = plane->dma_addr[0] + offset;
 	win_data->bpp = plane->bpp;
 	win_data->pixel_format = plane->pixel_format;
-	win_data->buf_offsize = (plane->fb_width - plane->crtc_width) *
+	win_data->buf_offsize =
-				(plane->bpp >> 3);
+		plane->pitch - (plane->crtc_width * (plane->bpp >> 3));
 	win_data->line_size = plane->crtc_width * (plane->bpp >> 3);
 
 	DRM_DEBUG_KMS("offset_x = %d, offset_y = %d\n",
@@ -704,7 +706,7 @@ static void fimd_win_commit(struct exynos_drm_crtc *crtc, int zpos)
 	writel(val, ctx->regs + VIDWx_BUF_START(win, 0));
 
 	/* buffer end address */
-	size = win_data->fb_width * win_data->ovl_height * (win_data->bpp >> 3);
+	size = win_data->fb_pitch * win_data->ovl_height * (win_data->bpp >> 3);
 	val = (unsigned long)(win_data->dma_addr + size);
 	writel(val, ctx->regs + VIDWx_BUF_END(win, 0));
 

drivers/gpu/drm/exynos/exynos_mixer.c

@@ -55,6 +55,7 @@ struct hdmi_win_data {
 	unsigned int		fb_x;
 	unsigned int		fb_y;
 	unsigned int		fb_width;
+	unsigned int		fb_pitch;
 	unsigned int		fb_height;
 	unsigned int		src_width;
 	unsigned int		src_height;
@@ -438,7 +439,7 @@ static void vp_video_buffer(struct mixer_context *ctx, int win)
 	} else {
 		luma_addr[0] = win_data->dma_addr;
 		chroma_addr[0] = win_data->dma_addr
-			+ (win_data->fb_width * win_data->fb_height);
+			+ (win_data->fb_pitch * win_data->fb_height);
 	}
 
 	if (win_data->scan_flags & DRM_MODE_FLAG_INTERLACE) {
@@ -447,8 +448,8 @@ static void vp_video_buffer(struct mixer_context *ctx, int win)
 			luma_addr[1] = luma_addr[0] + 0x40;
 			chroma_addr[1] = chroma_addr[0] + 0x40;
 		} else {
-			luma_addr[1] = luma_addr[0] + win_data->fb_width;
+			luma_addr[1] = luma_addr[0] + win_data->fb_pitch;
-			chroma_addr[1] = chroma_addr[0] + win_data->fb_width;
+			chroma_addr[1] = chroma_addr[0] + win_data->fb_pitch;
 		}
 	} else {
 		ctx->interlace = false;
@@ -469,10 +470,10 @@ static void vp_video_buffer(struct mixer_context *ctx, int win)
 	vp_reg_writemask(res, VP_MODE, val, VP_MODE_FMT_MASK);
 
 	/* setting size of input image */
-	vp_reg_write(res, VP_IMG_SIZE_Y, VP_IMG_HSIZE(win_data->fb_width) |
+	vp_reg_write(res, VP_IMG_SIZE_Y, VP_IMG_HSIZE(win_data->fb_pitch) |
 		VP_IMG_VSIZE(win_data->fb_height));
 	/* chroma height has to reduced by 2 to avoid chroma distorions */
-	vp_reg_write(res, VP_IMG_SIZE_C, VP_IMG_HSIZE(win_data->fb_width) |
+	vp_reg_write(res, VP_IMG_SIZE_C, VP_IMG_HSIZE(win_data->fb_pitch) |
 		VP_IMG_VSIZE(win_data->fb_height / 2));
 
 	vp_reg_write(res, VP_SRC_WIDTH, win_data->src_width);
@@ -559,7 +560,7 @@ static void mixer_graph_buffer(struct mixer_context *ctx, int win)
 	/* converting dma address base and source offset */
 	dma_addr = win_data->dma_addr
 		+ (win_data->fb_x * win_data->bpp >> 3)
-		+ (win_data->fb_y * win_data->fb_width * win_data->bpp >> 3);
+		+ (win_data->fb_y * win_data->fb_pitch);
 	src_x_offset = 0;
 	src_y_offset = 0;
 
@@ -576,7 +577,8 @@ static void mixer_graph_buffer(struct mixer_context *ctx, int win)
 		MXR_GRP_CFG_FORMAT_VAL(fmt), MXR_GRP_CFG_FORMAT_MASK);
 
 	/* setup geometry */
-	mixer_reg_write(res, MXR_GRAPHIC_SPAN(win), win_data->fb_width);
+	mixer_reg_write(res, MXR_GRAPHIC_SPAN(win),
+			win_data->fb_pitch / (win_data->bpp >> 3));
 
 	/* setup display size */
 	if (ctx->mxr_ver == MXR_VER_128_0_0_184 &&
@@ -961,6 +963,7 @@ static void mixer_win_mode_set(struct exynos_drm_crtc *crtc,
 	win_data->fb_y = plane->fb_y;
 	win_data->fb_width = plane->fb_width;
 	win_data->fb_height = plane->fb_height;
+	win_data->fb_pitch = plane->pitch;
 	win_data->src_width = plane->src_width;
 	win_data->src_height = plane->src_height;
 

drivers/gpu/drm/i915/intel_sprite.c

@@ -1113,7 +1113,7 @@ int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
 	drm_modeset_lock_all(dev);
 
 	plane = drm_plane_find(dev, set->plane_id);
-	if (!plane) {
+	if (!plane || plane->type != DRM_PLANE_TYPE_OVERLAY) {
 		ret = -ENOENT;
 		goto out_unlock;
 	}

drivers/gpu/drm/radeon/radeon_mn.c

@@ -122,7 +122,6 @@ static void radeon_mn_invalidate_range_start(struct mmu_notifier *mn,
 	it = interval_tree_iter_first(&rmn->objects, start, end);
 	while (it) {
 		struct radeon_bo *bo;
-		struct fence *fence;
 		int r;
 
 		bo = container_of(it, struct radeon_bo, mn_it);
@@ -134,12 +133,10 @@ static void radeon_mn_invalidate_range_start(struct mmu_notifier *mn,
 			continue;
 		}
 
-		fence = reservation_object_get_excl(bo->tbo.resv);
+		r = reservation_object_wait_timeout_rcu(bo->tbo.resv, true,
-		if (fence) {
+			false, MAX_SCHEDULE_TIMEOUT);
-			r = radeon_fence_wait((struct radeon_fence *)fence, false);
+		if (r)
-			if (r)
+			DRM_ERROR("(%d) failed to wait for user bo\n", r);
-				DRM_ERROR("(%d) failed to wait for user bo\n", r);
-		}
 
 		radeon_ttm_placement_from_domain(bo, RADEON_GEM_DOMAIN_CPU);
 		r = ttm_bo_validate(&bo->tbo, &bo->placement, false, false);

drivers/gpu/drm/radeon/radeon_ttm.c

@@ -598,6 +598,10 @@ static void radeon_ttm_tt_unpin_userptr(struct ttm_tt *ttm)
 	enum dma_data_direction direction = write ?
 		DMA_BIDIRECTIONAL : DMA_TO_DEVICE;
 
+	/* double check that we don't free the table twice */
+	if (!ttm->sg->sgl)
+		return;
+
 	/* free the sg table and pages again */
 	dma_unmap_sg(rdev->dev, ttm->sg->sgl, ttm->sg->nents, direction);
 

drivers/iio/accel/bma180.c

@@ -659,7 +659,7 @@ static irqreturn_t bma180_trigger_handler(int irq, void *p)
 
 	mutex_lock(&data->mutex);
 
-	for_each_set_bit(bit, indio_dev->buffer->scan_mask,
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
 			 indio_dev->masklength) {
 		ret = bma180_get_data_reg(data, bit);
 		if (ret < 0) {

drivers/iio/accel/bmc150-accel.c

@@ -168,14 +168,14 @@ static const struct {
 	int val;
 	int val2;
 	u8 bw_bits;
-} bmc150_accel_samp_freq_table[] = { {7, 810000, 0x08},
+} bmc150_accel_samp_freq_table[] = { {15, 620000, 0x08},
-				     {15, 630000, 0x09},
+				     {31, 260000, 0x09},
-				     {31, 250000, 0x0A},
+				     {62, 500000, 0x0A},
-				     {62, 500000, 0x0B},
+				     {125, 0, 0x0B},
-				     {125, 0, 0x0C},
+				     {250, 0, 0x0C},
-				     {250, 0, 0x0D},
+				     {500, 0, 0x0D},
-				     {500, 0, 0x0E},
+				     {1000, 0, 0x0E},
-				     {1000, 0, 0x0F} };
+				     {2000, 0, 0x0F} };
 
 static const struct {
 	int bw_bits;
@@ -840,7 +840,7 @@ static int bmc150_accel_validate_trigger(struct iio_dev *indio_dev,
 }
 
 static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
-		"7.810000 15.630000 31.250000 62.500000 125 250 500 1000");
+		"15.620000 31.260000 62.50000 125 250 500 1000 2000");
 
 static struct attribute *bmc150_accel_attributes[] = {
 	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
@@ -986,7 +986,7 @@ static irqreturn_t bmc150_accel_trigger_handler(int irq, void *p)
 	int bit, ret, i = 0;
 
 	mutex_lock(&data->mutex);
-	for_each_set_bit(bit, indio_dev->buffer->scan_mask,
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
 			 indio_dev->masklength) {
 		ret = i2c_smbus_read_word_data(data->client,
 					       BMC150_ACCEL_AXIS_TO_REG(bit));

drivers/iio/accel/kxcjk-1013.c

@@ -956,7 +956,7 @@ static irqreturn_t kxcjk1013_trigger_handler(int irq, void *p)
 
 	mutex_lock(&data->mutex);
 
-	for_each_set_bit(bit, indio_dev->buffer->scan_mask,
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
 			 indio_dev->masklength) {
 		ret = kxcjk1013_get_acc_reg(data, bit);
 		if (ret < 0) {

drivers/iio/adc/Kconfig

@@ -137,7 +137,8 @@ config AXP288_ADC
 
 config CC10001_ADC
 	tristate "Cosmic Circuits 10001 ADC driver"
-	depends on HAS_IOMEM || HAVE_CLK || REGULATOR
+	depends on HAVE_CLK || REGULATOR
+	depends on HAS_IOMEM
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help

drivers/iio/adc/at91_adc.c

@@ -544,7 +544,6 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
 {
 	struct iio_dev *idev = iio_trigger_get_drvdata(trig);
 	struct at91_adc_state *st = iio_priv(idev);
-	struct iio_buffer *buffer = idev->buffer;
 	struct at91_adc_reg_desc *reg = st->registers;
 	u32 status = at91_adc_readl(st, reg->trigger_register);
 	int value;
@@ -564,7 +563,7 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
 		at91_adc_writel(st, reg->trigger_register,
 				status | value);
 
-		for_each_set_bit(bit, buffer->scan_mask,
+		for_each_set_bit(bit, idev->active_scan_mask,
 				 st->num_channels) {
 			struct iio_chan_spec const *chan = idev->channels + bit;
 			at91_adc_writel(st, AT91_ADC_CHER,
@@ -579,7 +578,7 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
 		at91_adc_writel(st, reg->trigger_register,
 				status & ~value);
 
-		for_each_set_bit(bit, buffer->scan_mask,
+		for_each_set_bit(bit, idev->active_scan_mask,
 				 st->num_channels) {
 			struct iio_chan_spec const *chan = idev->channels + bit;
 			at91_adc_writel(st, AT91_ADC_CHDR,

drivers/iio/adc/ti_am335x_adc.c

@@ -188,12 +188,11 @@ static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
 static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
-	struct iio_buffer *buffer = indio_dev->buffer;
 	unsigned int enb = 0;
 	u8 bit;
 
 	tiadc_step_config(indio_dev);
-	for_each_set_bit(bit, buffer->scan_mask, adc_dev->channels)
+	for_each_set_bit(bit, indio_dev->active_scan_mask, adc_dev->channels)
 		enb |= (get_adc_step_bit(adc_dev, bit) << 1);
 	adc_dev->buffer_en_ch_steps = enb;
 

drivers/iio/adc/vf610_adc.c

@@ -141,9 +141,13 @@ struct vf610_adc {
 	struct regulator *vref;
 	struct vf610_adc_feature adc_feature;
 
+	u32 sample_freq_avail[5];
+
 	struct completion completion;
 };
 
+static const u32 vf610_hw_avgs[] = { 1, 4, 8, 16, 32 };
+
 #define VF610_ADC_CHAN(_idx, _chan_type) {			\
 	.type = (_chan_type),					\
 	.indexed = 1,						\
@@ -180,35 +184,47 @@ static const struct iio_chan_spec vf610_adc_iio_channels[] = {
 	/* sentinel */
 };
 
-/*
+static inline void vf610_adc_calculate_rates(struct vf610_adc *info)
- * ADC sample frequency, unit is ADCK cycles.
+{
- * ADC clk source is ipg clock, which is the same as bus clock.
+	unsigned long adck_rate, ipg_rate = clk_get_rate(info->clk);
- *
+	int i;
- * ADC conversion time = SFCAdder + AverageNum x (BCT + LSTAdder)
+
- * SFCAdder: fixed to 6 ADCK cycles
+	/*
- * AverageNum: 1, 4, 8, 16, 32 samples for hardware average.
+	 * Calculate ADC sample frequencies
- * BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode
+	 * Sample time unit is ADCK cycles. ADCK clk source is ipg clock,
- * LSTAdder(Long Sample Time): fixed to 3 ADCK cycles
+	 * which is the same as bus clock.
- *
+	 *
- * By default, enable 12 bit resolution mode, clock source
+	 * ADC conversion time = SFCAdder + AverageNum x (BCT + LSTAdder)
- * set to ipg clock, So get below frequency group:
+	 * SFCAdder: fixed to 6 ADCK cycles
- */
+	 * AverageNum: 1, 4, 8, 16, 32 samples for hardware average.
-static const u32 vf610_sample_freq_avail[5] =
+	 * BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode
-{1941176, 559332, 286957, 145374, 73171};
+	 * LSTAdder(Long Sample Time): fixed to 3 ADCK cycles
+	 */
+	adck_rate = ipg_rate / info->adc_feature.clk_div;
+	for (i = 0; i < ARRAY_SIZE(vf610_hw_avgs); i++)
+		info->sample_freq_avail[i] =
+			adck_rate / (6 + vf610_hw_avgs[i] * (25 + 3));
+}
 
 static inline void vf610_adc_cfg_init(struct vf610_adc *info)
 {
+	struct vf610_adc_feature *adc_feature = &info->adc_feature;
+
 	/* set default Configuration for ADC controller */
-	info->adc_feature.clk_sel = VF610_ADCIOC_BUSCLK_SET;
+	adc_feature->clk_sel = VF610_ADCIOC_BUSCLK_SET;
-	info->adc_feature.vol_ref = VF610_ADCIOC_VR_VREF_SET;
+	adc_feature->vol_ref = VF610_ADCIOC_VR_VREF_SET;
 
-	info->adc_feature.calibration = true;
+	adc_feature->calibration = true;
-	info->adc_feature.ovwren = true;
+	adc_feature->ovwren = true;
 
-	info->adc_feature.clk_div = 1;
+	adc_feature->res_mode = 12;
-	info->adc_feature.res_mode = 12;
+	adc_feature->sample_rate = 1;
-	info->adc_feature.sample_rate = 1;
+	adc_feature->lpm = true;
-	info->adc_feature.lpm = true;
+
+	/* Use a save ADCK which is below 20MHz on all devices */
+	adc_feature->clk_div = 8;
+
+	vf610_adc_calculate_rates(info);
 }
 
 static void vf610_adc_cfg_post_set(struct vf610_adc *info)
@@ -290,12 +306,10 @@ static void vf610_adc_cfg_set(struct vf610_adc *info)
 
 	cfg_data = readl(info->regs + VF610_REG_ADC_CFG);
 
-	/* low power configuration */
 	cfg_data &= ~VF610_ADC_ADLPC_EN;
 	if (adc_feature->lpm)
 		cfg_data |= VF610_ADC_ADLPC_EN;
 
-	/* disable high speed */
 	cfg_data &= ~VF610_ADC_ADHSC_EN;
 
 	writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
@@ -435,10 +449,27 @@ static irqreturn_t vf610_adc_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("1941176, 559332, 286957, 145374, 73171");
+static ssize_t vf610_show_samp_freq_avail(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct vf610_adc *info = iio_priv(dev_to_iio_dev(dev));
+	size_t len = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(info->sample_freq_avail); i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len,
+			"%u ", info->sample_freq_avail[i]);
+
+	/* replace trailing space by newline */
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(vf610_show_samp_freq_avail);
 
 static struct attribute *vf610_attributes[] = {
-	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
 	NULL
 };
 
@@ -502,7 +533,7 @@ static int vf610_read_raw(struct iio_dev *indio_dev,
 		return IIO_VAL_FRACTIONAL_LOG2;
 
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		*val = vf610_sample_freq_avail[info->adc_feature.sample_rate];
+		*val = info->sample_freq_avail[info->adc_feature.sample_rate];
 		*val2 = 0;
 		return IIO_VAL_INT;
 
@@ -525,9 +556,9 @@ static int vf610_write_raw(struct iio_dev *indio_dev,
 	switch (mask) {
 		case IIO_CHAN_INFO_SAMP_FREQ:
 			for (i = 0;
-				i < ARRAY_SIZE(vf610_sample_freq_avail);
+				i < ARRAY_SIZE(info->sample_freq_avail);
 				i++)
-				if (val == vf610_sample_freq_avail[i]) {
+				if (val == info->sample_freq_avail[i]) {
 					info->adc_feature.sample_rate = i;
 					vf610_adc_sample_set(info);
 					return 0;

drivers/iio/gyro/bmg160.c

@@ -822,7 +822,7 @@ static irqreturn_t bmg160_trigger_handler(int irq, void *p)
 	int bit, ret, i = 0;
 
 	mutex_lock(&data->mutex);
-	for_each_set_bit(bit, indio_dev->buffer->scan_mask,
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
 			 indio_dev->masklength) {
 		ret = i2c_smbus_read_word_data(data->client,
 					       BMG160_AXIS_TO_REG(bit));

drivers/iio/imu/adis_trigger.c

@@ -60,7 +60,7 @@ int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev)
 	iio_trigger_set_drvdata(adis->trig, adis);
 	ret = iio_trigger_register(adis->trig);
 
-	indio_dev->trig = adis->trig;
+	indio_dev->trig = iio_trigger_get(adis->trig);
 	if (ret)
 		goto error_free_irq;
 

drivers/iio/imu/inv_mpu6050/inv_mpu_core.c

@@ -410,42 +410,46 @@ error_read_raw:
 	}
 }
 
-static int inv_mpu6050_write_fsr(struct inv_mpu6050_state *st, int fsr)
+static int inv_mpu6050_write_gyro_scale(struct inv_mpu6050_state *st, int val)
 {
-	int result;
+	int result, i;
 	u8 d;
 
-	if (fsr < 0 || fsr > INV_MPU6050_MAX_GYRO_FS_PARAM)
+	for (i = 0; i < ARRAY_SIZE(gyro_scale_6050); ++i) {
-		return -EINVAL;
+		if (gyro_scale_6050[i] == val) {
-	if (fsr == st->chip_config.fsr)
+			d = (i << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT);
-		return 0;
+			result = inv_mpu6050_write_reg(st,
+					st->reg->gyro_config, d);
+			if (result)
+				return result;
 
-	d = (fsr << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT);
+			st->chip_config.fsr = i;
-	result = inv_mpu6050_write_reg(st, st->reg->gyro_config, d);
+			return 0;
-	if (result)
+		}
-		return result;
+	}
-	st->chip_config.fsr = fsr;
 
-	return 0;
+	return -EINVAL;
 }
 
-static int inv_mpu6050_write_accel_fs(struct inv_mpu6050_state *st, int fs)
+static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val)
 {
-	int result;
+	int result, i;
 	u8 d;
 
-	if (fs < 0 || fs > INV_MPU6050_MAX_ACCL_FS_PARAM)
+	for (i = 0; i < ARRAY_SIZE(accel_scale); ++i) {
-		return -EINVAL;
+		if (accel_scale[i] == val) {
-	if (fs == st->chip_config.accl_fs)
+			d = (i << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT);
-		return 0;
+			result = inv_mpu6050_write_reg(st,
+					st->reg->accl_config, d);
+			if (result)
+				return result;
 
-	d = (fs << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT);
+			st->chip_config.accl_fs = i;
-	result = inv_mpu6050_write_reg(st, st->reg->accl_config, d);
+			return 0;
-	if (result)
+		}
-		return result;
+	}
-	st->chip_config.accl_fs = fs;
 
-	return 0;
+	return -EINVAL;
 }
 
 static int inv_mpu6050_write_raw(struct iio_dev *indio_dev,
@@ -471,10 +475,10 @@ static int inv_mpu6050_write_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_SCALE:
 		switch (chan->type) {
 		case IIO_ANGL_VEL:
-			result = inv_mpu6050_write_fsr(st, val);
+			result = inv_mpu6050_write_gyro_scale(st, val2);
 			break;
 		case IIO_ACCEL:
-			result = inv_mpu6050_write_accel_fs(st, val);
+			result = inv_mpu6050_write_accel_scale(st, val2);
 			break;
 		default:
 			result = -EINVAL;

drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c

@@ -24,6 +24,16 @@
 #include <linux/poll.h>
 #include "inv_mpu_iio.h"
 
+static void inv_clear_kfifo(struct inv_mpu6050_state *st)
+{
+	unsigned long flags;
+
+	/* take the spin lock sem to avoid interrupt kick in */
+	spin_lock_irqsave(&st->time_stamp_lock, flags);
+	kfifo_reset(&st->timestamps);
+	spin_unlock_irqrestore(&st->time_stamp_lock, flags);
+}
+
 int inv_reset_fifo(struct iio_dev *indio_dev)
 {
 	int result;
@@ -50,6 +60,10 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
 					INV_MPU6050_BIT_FIFO_RST);
 	if (result)
 		goto reset_fifo_fail;
+
+	/* clear timestamps fifo */
+	inv_clear_kfifo(st);
+
 	/* enable interrupt */
 	if (st->chip_config.accl_fifo_enable ||
 	    st->chip_config.gyro_fifo_enable) {
@@ -83,16 +97,6 @@ reset_fifo_fail:
 	return result;
 }
 
-static void inv_clear_kfifo(struct inv_mpu6050_state *st)
-{
-	unsigned long flags;
-
-	/* take the spin lock sem to avoid interrupt kick in */
-	spin_lock_irqsave(&st->time_stamp_lock, flags);
-	kfifo_reset(&st->timestamps);
-	spin_unlock_irqrestore(&st->time_stamp_lock, flags);
-}
-
 /**
  * inv_mpu6050_irq_handler() - Cache a timestamp at each data ready interrupt.
  */
@@ -184,7 +188,6 @@ end_session:
 flush_fifo:
 	/* Flush HW and SW FIFOs. */
 	inv_reset_fifo(indio_dev);
-	inv_clear_kfifo(st);
 	mutex_unlock(&indio_dev->mlock);
 	iio_trigger_notify_done(indio_dev->trig);
 

drivers/iio/imu/kmx61.c

@@ -1227,7 +1227,7 @@ static irqreturn_t kmx61_trigger_handler(int irq, void *p)
 		base = KMX61_MAG_XOUT_L;
 
 	mutex_lock(&data->lock);
-	for_each_set_bit(bit, indio_dev->buffer->scan_mask,
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
 			 indio_dev->masklength) {
 		ret = kmx61_read_measurement(data, base, bit);
 		if (ret < 0) {

drivers/iio/industrialio-core.c

@@ -847,8 +847,7 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
  * @attr_list: List of IIO device attributes
  *
  * This function frees the memory allocated for each of the IIO device
- * attributes in the list. Note: if you want to reuse the list after calling
+ * attributes in the list.
- * this function you have to reinitialize it using INIT_LIST_HEAD().
  */
 void iio_free_chan_devattr_list(struct list_head *attr_list)
 {
@@ -856,6 +855,7 @@ void iio_free_chan_devattr_list(struct list_head *attr_list)
 
 	list_for_each_entry_safe(p, n, attr_list, l) {
 		kfree(p->dev_attr.attr.name);
+		list_del(&p->l);
 		kfree(p);
 	}
 }
@@ -936,6 +936,7 @@ static void iio_device_unregister_sysfs(struct iio_dev *indio_dev)
 
 	iio_free_chan_devattr_list(&indio_dev->channel_attr_list);
 	kfree(indio_dev->chan_attr_group.attrs);
+	indio_dev->chan_attr_group.attrs = NULL;
 }
 
 static void iio_dev_release(struct device *device)

drivers/iio/industrialio-event.c

@@ -500,6 +500,7 @@ int iio_device_register_eventset(struct iio_dev *indio_dev)
 error_free_setup_event_lines:
 	iio_free_chan_devattr_list(&indio_dev->event_interface->dev_attr_list);
 	kfree(indio_dev->event_interface);
+	indio_dev->event_interface = NULL;
 	return ret;
 }
 

drivers/iio/proximity/sx9500.c

@@ -494,7 +494,7 @@ static irqreturn_t sx9500_trigger_handler(int irq, void *private)
 
 	mutex_lock(&data->mutex);
 
-	for_each_set_bit(bit, indio_dev->buffer->scan_mask,
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
 			 indio_dev->masklength) {
 		ret = sx9500_read_proximity(data, &indio_dev->channels[bit],
 					    &val);

drivers/infiniband/core/umem.c

@@ -99,6 +99,14 @@ struct ib_umem *ib_umem_get(struct ib_ucontext *context, unsigned long addr,
 	if (dmasync)
 		dma_set_attr(DMA_ATTR_WRITE_BARRIER, &attrs);
 
+	/*
+	 * If the combination of the addr and size requested for this memory
+	 * region causes an integer overflow, return error.
+	 */
+	if ((PAGE_ALIGN(addr + size) <= size) ||
+	    (PAGE_ALIGN(addr + size) <= addr))
+		return ERR_PTR(-EINVAL);
+
 	if (!can_do_mlock())
 		return ERR_PTR(-EPERM);
 

drivers/input/mouse/alps.c

@@ -1154,10 +1154,28 @@ out:
 	mutex_unlock(&alps_mutex);
 }
 
-static void alps_report_bare_ps2_packet(struct input_dev *dev,
+static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
 					unsigned char packet[],
 					bool report_buttons)
 {
+	struct alps_data *priv = psmouse->private;
+	struct input_dev *dev;
+
+	/* Figure out which device to use to report the bare packet */
+	if (priv->proto_version == ALPS_PROTO_V2 &&
+	    (priv->flags & ALPS_DUALPOINT)) {
+		/* On V2 devices the DualPoint Stick reports bare packets */
+		dev = priv->dev2;
+	} else if (unlikely(IS_ERR_OR_NULL(priv->dev3))) {
+		/* Register dev3 mouse if we received PS/2 packet first time */
+		if (!IS_ERR(priv->dev3))
+			psmouse_queue_work(psmouse, &priv->dev3_register_work,
+					   0);
+		return;
+	} else {
+		dev = priv->dev3;
+	}
+
 	if (report_buttons)
 		alps_report_buttons(dev, NULL,
 				packet[0] & 1, packet[0] & 2, packet[0] & 4);
@@ -1232,8 +1250,8 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
 		 * de-synchronization.
 		 */
 
-		alps_report_bare_ps2_packet(priv->dev2,
+		alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3],
-					    &psmouse->packet[3], false);
+					    false);
 
 		/*
 		 * Continue with the standard ALPS protocol handling,
@@ -1289,18 +1307,9 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
 	 * properly we only do this if the device is fully synchronized.
 	 */
 	if (!psmouse->out_of_sync_cnt && (psmouse->packet[0] & 0xc8) == 0x08) {
-
-		/* Register dev3 mouse if we received PS/2 packet first time */
-		if (unlikely(!priv->dev3))
-			psmouse_queue_work(psmouse,
-					   &priv->dev3_register_work, 0);
-
 		if (psmouse->pktcnt == 3) {
-			/* Once dev3 mouse device is registered report data */
+			alps_report_bare_ps2_packet(psmouse, psmouse->packet,
-			if (likely(!IS_ERR_OR_NULL(priv->dev3)))
+						    true);
-				alps_report_bare_ps2_packet(priv->dev3,
-							    psmouse->packet,
-							    true);
 			return PSMOUSE_FULL_PACKET;
 		}
 		return PSMOUSE_GOOD_DATA;
@@ -2281,10 +2290,12 @@ static int alps_set_protocol(struct psmouse *psmouse,
 		priv->set_abs_params = alps_set_abs_params_mt;
 		priv->nibble_commands = alps_v3_nibble_commands;
 		priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
-		priv->x_max = 1360;
-		priv->y_max = 660;
 		priv->x_bits = 23;
 		priv->y_bits = 12;
+
+		if (alps_dolphin_get_device_area(psmouse, priv))
+			return -EIO;
+
 		break;
 
 	case ALPS_PROTO_V6:
@@ -2303,9 +2314,8 @@ static int alps_set_protocol(struct psmouse *psmouse,
 		priv->set_abs_params = alps_set_abs_params_mt;
 		priv->nibble_commands = alps_v3_nibble_commands;
 		priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
-
+		priv->x_max = 0xfff;
-		if (alps_dolphin_get_device_area(psmouse, priv))
+		priv->y_max = 0x7ff;
-			return -EIO;
 
 		if (priv->fw_ver[1] != 0xba)
 			priv->flags |= ALPS_BUTTONPAD;

drivers/input/mouse/synaptics.c

@@ -152,6 +152,11 @@ static const struct min_max_quirk min_max_pnpid_table[] = {
 		{ANY_BOARD_ID, ANY_BOARD_ID},
 		1024, 5022, 2508, 4832
 	},
+	{
+		(const char * const []){"LEN2006", NULL},
+		{2691, 2691},
+		1024, 5045, 2457, 4832
+	},
 	{
 		(const char * const []){"LEN2006", NULL},
 		{ANY_BOARD_ID, ANY_BOARD_ID},
@@ -189,7 +194,7 @@ static const char * const topbuttonpad_pnp_ids[] = {
 	"LEN2003",
 	"LEN2004", /* L440 */
 	"LEN2005",
-	"LEN2006",
+	"LEN2006", /* Edge E440/E540 */
 	"LEN2007",
 	"LEN2008",
 	"LEN2009",

drivers/iommu/arm-smmu.c

@@ -1288,10 +1288,13 @@ static phys_addr_t arm_smmu_iova_to_phys(struct iommu_domain *domain,
 		return 0;
 
 	spin_lock_irqsave(&smmu_domain->pgtbl_lock, flags);
-	if (smmu_domain->smmu->features & ARM_SMMU_FEAT_TRANS_OPS)
+	if (smmu_domain->smmu->features & ARM_SMMU_FEAT_TRANS_OPS &&
+			smmu_domain->stage == ARM_SMMU_DOMAIN_S1) {
 		ret = arm_smmu_iova_to_phys_hard(domain, iova);
-	else
+	} else {
 		ret = ops->iova_to_phys(ops, iova);
+	}
+
 	spin_unlock_irqrestore(&smmu_domain->pgtbl_lock, flags);
 
 	return ret;
@@ -1556,7 +1559,7 @@ static int arm_smmu_device_cfg_probe(struct arm_smmu_device *smmu)
 		return -ENODEV;
 	}
 
-	if (smmu->version == 1 || (!(id & ID0_ATOSNS) && (id & ID0_S1TS))) {
+	if ((id & ID0_S1TS) && ((smmu->version == 1) || (id & ID0_ATOSNS))) {
 		smmu->features |= ARM_SMMU_FEAT_TRANS_OPS;
 		dev_notice(smmu->dev, "\taddress translation ops\n");
 	}

drivers/iommu/intel-iommu.c

@@ -1742,9 +1742,8 @@ static int domain_init(struct dmar_domain *domain, int guest_width)
 
 static void domain_exit(struct dmar_domain *domain)
 {
-	struct dmar_drhd_unit *drhd;
-	struct intel_iommu *iommu;
 	struct page *freelist = NULL;
+	int i;
 
 	/* Domain 0 is reserved, so dont process it */
 	if (!domain)
@@ -1764,8 +1763,8 @@ static void domain_exit(struct dmar_domain *domain)
 
 	/* clear attached or cached domains */
 	rcu_read_lock();
-	for_each_active_iommu(iommu, drhd)
+	for_each_set_bit(i, domain->iommu_bmp, g_num_of_iommus)
-		iommu_detach_domain(domain, iommu);
+		iommu_detach_domain(domain, g_iommus[i]);
 	rcu_read_unlock();
 
 	dma_free_pagelist(freelist);

drivers/iommu/ipmmu-vmsa.c

@@ -851,6 +851,7 @@ static int ipmmu_remove(struct platform_device *pdev)
 
 static const struct of_device_id ipmmu_of_ids[] = {
 	{ .compatible = "renesas,ipmmu-vmsa", },
+	{ }
 };
 
 static struct platform_driver ipmmu_driver = {

drivers/irqchip/irq-gic-v3-its.c

@@ -169,7 +169,7 @@ static void its_encode_cmd(struct its_cmd_block *cmd, u8 cmd_nr)
 
 static void its_encode_devid(struct its_cmd_block *cmd, u32 devid)
 {
-	cmd->raw_cmd[0] &= ~(0xffffUL << 32);
+	cmd->raw_cmd[0] &= BIT_ULL(32) - 1;
 	cmd->raw_cmd[0] |= ((u64)devid) << 32;
 }
 
@@ -802,6 +802,7 @@ static int its_alloc_tables(struct its_node *its)
 	int i;
 	int psz = SZ_64K;
 	u64 shr = GITS_BASER_InnerShareable;
+	u64 cache = GITS_BASER_WaWb;
 
 	for (i = 0; i < GITS_BASER_NR_REGS; i++) {
 		u64 val = readq_relaxed(its->base + GITS_BASER + i * 8);
@@ -848,7 +849,7 @@ retry_baser:
 		val = (virt_to_phys(base) 				 |
 		       (type << GITS_BASER_TYPE_SHIFT)			 |
 		       ((entry_size - 1) << GITS_BASER_ENTRY_SIZE_SHIFT) |
-		       GITS_BASER_WaWb					 |
+		       cache						 |
 		       shr						 |
 		       GITS_BASER_VALID);
 
@@ -874,9 +875,12 @@ retry_baser:
 			 * Shareability didn't stick. Just use
 			 * whatever the read reported, which is likely
 			 * to be the only thing this redistributor
-			 * supports.
+			 * supports. If that's zero, make it
+			 * non-cacheable as well.
 			 */
 			shr = tmp & GITS_BASER_SHAREABILITY_MASK;
+			if (!shr)
+				cache = GITS_BASER_nC;
 			goto retry_baser;
 		}
 
@@ -980,16 +984,39 @@ static void its_cpu_init_lpis(void)
 	tmp = readq_relaxed(rbase + GICR_PROPBASER);
 
 	if ((tmp ^ val) & GICR_PROPBASER_SHAREABILITY_MASK) {
+		if (!(tmp & GICR_PROPBASER_SHAREABILITY_MASK)) {
+			/*
+			 * The HW reports non-shareable, we must
+			 * remove the cacheability attributes as
+			 * well.
+			 */
+			val &= ~(GICR_PROPBASER_SHAREABILITY_MASK |
+				 GICR_PROPBASER_CACHEABILITY_MASK);
+			val |= GICR_PROPBASER_nC;
+			writeq_relaxed(val, rbase + GICR_PROPBASER);
+		}
 		pr_info_once("GIC: using cache flushing for LPI property table\n");
 		gic_rdists->flags |= RDIST_FLAGS_PROPBASE_NEEDS_FLUSHING;
 	}
 
 	/* set PENDBASE */
 	val = (page_to_phys(pend_page) |
-	       GICR_PROPBASER_InnerShareable |
+	       GICR_PENDBASER_InnerShareable |
-	       GICR_PROPBASER_WaWb);
+	       GICR_PENDBASER_WaWb);
 
 	writeq_relaxed(val, rbase + GICR_PENDBASER);
+	tmp = readq_relaxed(rbase + GICR_PENDBASER);
+
+	if (!(tmp & GICR_PENDBASER_SHAREABILITY_MASK)) {
+		/*
+		 * The HW reports non-shareable, we must remove the
+		 * cacheability attributes as well.
+		 */
+		val &= ~(GICR_PENDBASER_SHAREABILITY_MASK |
+			 GICR_PENDBASER_CACHEABILITY_MASK);
+		val |= GICR_PENDBASER_nC;
+		writeq_relaxed(val, rbase + GICR_PENDBASER);
+	}
 
 	/* Enable LPIs */
 	val = readl_relaxed(rbase + GICR_CTLR);
@@ -1026,7 +1053,7 @@ static void its_cpu_init_collection(void)
 			 * This ITS wants a linear CPU number.
 			 */
 			target = readq_relaxed(gic_data_rdist_rd_base() + GICR_TYPER);
-			target = GICR_TYPER_CPU_NUMBER(target);
+			target = GICR_TYPER_CPU_NUMBER(target) << 16;
 		}
 
 		/* Perform collection mapping */
@@ -1422,14 +1449,26 @@ static int its_probe(struct device_node *node, struct irq_domain *parent)
 
 	writeq_relaxed(baser, its->base + GITS_CBASER);
 	tmp = readq_relaxed(its->base + GITS_CBASER);
-	writeq_relaxed(0, its->base + GITS_CWRITER);
-	writel_relaxed(GITS_CTLR_ENABLE, its->base + GITS_CTLR);
 
-	if ((tmp ^ baser) & GITS_BASER_SHAREABILITY_MASK) {
+	if ((tmp ^ baser) & GITS_CBASER_SHAREABILITY_MASK) {
+		if (!(tmp & GITS_CBASER_SHAREABILITY_MASK)) {
+			/*
+			 * The HW reports non-shareable, we must
+			 * remove the cacheability attributes as
+			 * well.
+			 */
+			baser &= ~(GITS_CBASER_SHAREABILITY_MASK |
+				   GITS_CBASER_CACHEABILITY_MASK);
+			baser |= GITS_CBASER_nC;
+			writeq_relaxed(baser, its->base + GITS_CBASER);
+		}
 		pr_info("ITS: using cache flushing for cmd queue\n");
 		its->flags |= ITS_FLAGS_CMDQ_NEEDS_FLUSHING;
 	}
 
+	writeq_relaxed(0, its->base + GITS_CWRITER);
+	writel_relaxed(GITS_CTLR_ENABLE, its->base + GITS_CTLR);
+
 	if (of_property_read_bool(its->msi_chip.of_node, "msi-controller")) {
 		its->domain = irq_domain_add_tree(NULL, &its_domain_ops, its);
 		if (!its->domain) {

drivers/lguest/Kconfig

@@ -1,6 +1,6 @@
 config LGUEST
 	tristate "Linux hypervisor example code"
-	depends on X86_32 && EVENTFD && TTY
+	depends on X86_32 && EVENTFD && TTY && PCI_DIRECT
 	select HVC_DRIVER
 	---help---
 	  This is a very simple module which allows you to run

drivers/net/bonding/bond_main.c

@@ -3850,7 +3850,8 @@ static inline int bond_slave_override(struct bonding *bond,
 	/* Find out if any slaves have the same mapping as this skb. */
 	bond_for_each_slave_rcu(bond, slave, iter) {
 		if (slave->queue_id == skb->queue_mapping) {
-			if (bond_slave_can_tx(slave)) {
+			if (bond_slave_is_up(slave) &&
+			    slave->link == BOND_LINK_UP) {
 				bond_dev_queue_xmit(bond, skb, slave->dev);
 				return 0;
 			}

drivers/net/can/flexcan.c

@@ -592,13 +592,12 @@ static int flexcan_poll_state(struct net_device *dev, u32 reg_esr)
 		rx_state = unlikely(reg_esr & FLEXCAN_ESR_RX_WRN) ?
 			   CAN_STATE_ERROR_WARNING : CAN_STATE_ERROR_ACTIVE;
 		new_state = max(tx_state, rx_state);
-	} else if (unlikely(flt == FLEXCAN_ESR_FLT_CONF_PASSIVE)) {
+	} else {
 		__flexcan_get_berr_counter(dev, &bec);
-		new_state = CAN_STATE_ERROR_PASSIVE;
+		new_state = flt == FLEXCAN_ESR_FLT_CONF_PASSIVE ?
+			    CAN_STATE_ERROR_PASSIVE : CAN_STATE_BUS_OFF;
 		rx_state = bec.rxerr >= bec.txerr ? new_state : 0;
 		tx_state = bec.rxerr <= bec.txerr ? new_state : 0;
-	} else {
-		new_state = CAN_STATE_BUS_OFF;
 	}
 
 	/* state hasn't changed */
@@ -1158,12 +1157,19 @@ static int flexcan_probe(struct platform_device *pdev)
 	const struct flexcan_devtype_data *devtype_data;
 	struct net_device *dev;
 	struct flexcan_priv *priv;
+	struct regulator *reg_xceiver;
 	struct resource *mem;
 	struct clk *clk_ipg = NULL, *clk_per = NULL;
 	void __iomem *base;
 	int err, irq;
 	u32 clock_freq = 0;
 
+	reg_xceiver = devm_regulator_get(&pdev->dev, "xceiver");
+	if (PTR_ERR(reg_xceiver) == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	else if (IS_ERR(reg_xceiver))
+		reg_xceiver = NULL;
+
 	if (pdev->dev.of_node)
 		of_property_read_u32(pdev->dev.of_node,
 						"clock-frequency", &clock_freq);
@@ -1224,9 +1230,7 @@ static int flexcan_probe(struct platform_device *pdev)
 	priv->pdata = dev_get_platdata(&pdev->dev);
 	priv->devtype_data = devtype_data;
 
-	priv->reg_xceiver = devm_regulator_get(&pdev->dev, "xceiver");
+	priv->reg_xceiver = reg_xceiver;
-	if (IS_ERR(priv->reg_xceiver))
-		priv->reg_xceiver = NULL;
 
 	netif_napi_add(dev, &priv->napi, flexcan_poll, FLEXCAN_NAPI_WEIGHT);
 

drivers/net/can/usb/gs_usb.c

@@ -901,6 +901,8 @@ static int gs_usb_probe(struct usb_interface *intf, const struct usb_device_id *
 	}
 
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
 	init_usb_anchor(&dev->rx_submitted);
 
 	atomic_set(&dev->active_channels, 0);

drivers/net/can/usb/kvaser_usb.c

@@ -25,7 +25,6 @@
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
 
-#define MAX_TX_URBS			16
 #define MAX_RX_URBS			4
 #define START_TIMEOUT			1000 /* msecs */
 #define STOP_TIMEOUT			1000 /* msecs */
@@ -443,6 +442,7 @@ struct kvaser_usb_error_summary {
 	};
 };
 
+/* Context for an outstanding, not yet ACKed, transmission */
 struct kvaser_usb_tx_urb_context {
 	struct kvaser_usb_net_priv *priv;
 	u32 echo_index;
@@ -456,8 +456,13 @@ struct kvaser_usb {
 	struct usb_endpoint_descriptor *bulk_in, *bulk_out;
 	struct usb_anchor rx_submitted;
 
+	/* @max_tx_urbs: Firmware-reported maximum number of oustanding,
+	 * not yet ACKed, transmissions on this device. This value is
+	 * also used as a sentinel for marking free tx contexts.
+	 */
 	u32 fw_version;
 	unsigned int nchannels;
+	unsigned int max_tx_urbs;
 	enum kvaser_usb_family family;
 
 	bool rxinitdone;
@@ -467,19 +472,18 @@ struct kvaser_usb {
 
 struct kvaser_usb_net_priv {
 	struct can_priv can;
-
+	struct can_berr_counter bec;
-	spinlock_t tx_contexts_lock;
-	int active_tx_contexts;
-	struct kvaser_usb_tx_urb_context tx_contexts[MAX_TX_URBS];
-
-	struct usb_anchor tx_submitted;
-	struct completion start_comp, stop_comp;
 
 	struct kvaser_usb *dev;
 	struct net_device *netdev;
 	int channel;
 
-	struct can_berr_counter bec;
+	struct completion start_comp, stop_comp;
+	struct usb_anchor tx_submitted;
+
+	spinlock_t tx_contexts_lock;
+	int active_tx_contexts;
+	struct kvaser_usb_tx_urb_context tx_contexts[];
 };
 
 static const struct usb_device_id kvaser_usb_table[] = {
@@ -592,8 +596,8 @@ static int kvaser_usb_wait_msg(const struct kvaser_usb *dev, u8 id,
 			 * for further details.
 			 */
 			if (tmp->len == 0) {
-				pos = round_up(pos,
+				pos = round_up(pos, le16_to_cpu(dev->bulk_in->
-					       dev->bulk_in->wMaxPacketSize);
+								wMaxPacketSize));
 				continue;
 			}
 
@@ -657,9 +661,13 @@ static int kvaser_usb_get_software_info(struct kvaser_usb *dev)
 	switch (dev->family) {
 	case KVASER_LEAF:
 		dev->fw_version = le32_to_cpu(msg.u.leaf.softinfo.fw_version);
+		dev->max_tx_urbs =
+			le16_to_cpu(msg.u.leaf.softinfo.max_outstanding_tx);
 		break;
 	case KVASER_USBCAN:
 		dev->fw_version = le32_to_cpu(msg.u.usbcan.softinfo.fw_version);
+		dev->max_tx_urbs =
+			le16_to_cpu(msg.u.usbcan.softinfo.max_outstanding_tx);
 		break;
 	}
 
@@ -715,7 +723,7 @@ static void kvaser_usb_tx_acknowledge(const struct kvaser_usb *dev,
 
 	stats = &priv->netdev->stats;
 
-	context = &priv->tx_contexts[tid % MAX_TX_URBS];
+	context = &priv->tx_contexts[tid % dev->max_tx_urbs];
 
 	/* Sometimes the state change doesn't come after a bus-off event */
 	if (priv->can.restart_ms &&
@@ -744,7 +752,7 @@ static void kvaser_usb_tx_acknowledge(const struct kvaser_usb *dev,
 	spin_lock_irqsave(&priv->tx_contexts_lock, flags);
 
 	can_get_echo_skb(priv->netdev, context->echo_index);
-	context->echo_index = MAX_TX_URBS;
+	context->echo_index = dev->max_tx_urbs;
 	--priv->active_tx_contexts;
 	netif_wake_queue(priv->netdev);
 
@@ -1329,7 +1337,8 @@ static void kvaser_usb_read_bulk_callback(struct urb *urb)
 		 * number of events in case of a heavy rx load on the bus.
 		 */
 		if (msg->len == 0) {
-			pos = round_up(pos, dev->bulk_in->wMaxPacketSize);
+			pos = round_up(pos, le16_to_cpu(dev->bulk_in->
+							wMaxPacketSize));
 			continue;
 		}
 
@@ -1512,11 +1521,13 @@ error:
 
 static void kvaser_usb_reset_tx_urb_contexts(struct kvaser_usb_net_priv *priv)
 {
-	int i;
+	int i, max_tx_urbs;
+
+	max_tx_urbs = priv->dev->max_tx_urbs;
 
 	priv->active_tx_contexts = 0;
-	for (i = 0; i < MAX_TX_URBS; i++)
+	for (i = 0; i < max_tx_urbs; i++)
-		priv->tx_contexts[i].echo_index = MAX_TX_URBS;
+		priv->tx_contexts[i].echo_index = max_tx_urbs;
 }
 
 /* This method might sleep. Do not call it in the atomic context
@@ -1702,14 +1713,14 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
 		*msg_tx_can_flags |= MSG_FLAG_REMOTE_FRAME;
 
 	spin_lock_irqsave(&priv->tx_contexts_lock, flags);
-	for (i = 0; i < ARRAY_SIZE(priv->tx_contexts); i++) {
+	for (i = 0; i < dev->max_tx_urbs; i++) {
-		if (priv->tx_contexts[i].echo_index == MAX_TX_URBS) {
+		if (priv->tx_contexts[i].echo_index == dev->max_tx_urbs) {
 			context = &priv->tx_contexts[i];
 
 			context->echo_index = i;
 			can_put_echo_skb(skb, netdev, context->echo_index);
 			++priv->active_tx_contexts;
-			if (priv->active_tx_contexts >= MAX_TX_URBS)
+			if (priv->active_tx_contexts >= dev->max_tx_urbs)
 				netif_stop_queue(netdev);
 
 			break;
@@ -1743,7 +1754,7 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
 		spin_lock_irqsave(&priv->tx_contexts_lock, flags);
 
 		can_free_echo_skb(netdev, context->echo_index);
-		context->echo_index = MAX_TX_URBS;
+		context->echo_index = dev->max_tx_urbs;
 		--priv->active_tx_contexts;
 		netif_wake_queue(netdev);
 
@@ -1881,7 +1892,9 @@ static int kvaser_usb_init_one(struct usb_interface *intf,
 	if (err)
 		return err;
 
-	netdev = alloc_candev(sizeof(*priv), MAX_TX_URBS);
+	netdev = alloc_candev(sizeof(*priv) +
+			      dev->max_tx_urbs * sizeof(*priv->tx_contexts),
+			      dev->max_tx_urbs);
 	if (!netdev) {
 		dev_err(&intf->dev, "Cannot alloc candev\n");
 		return -ENOMEM;
@@ -2009,6 +2022,13 @@ static int kvaser_usb_probe(struct usb_interface *intf,
 		return err;
 	}
 
+	dev_dbg(&intf->dev, "Firmware version: %d.%d.%d\n",
+		((dev->fw_version >> 24) & 0xff),
+		((dev->fw_version >> 16) & 0xff),
+		(dev->fw_version & 0xffff));
+
+	dev_dbg(&intf->dev, "Max oustanding tx = %d URBs\n", dev->max_tx_urbs);
+
 	err = kvaser_usb_get_card_info(dev);
 	if (err) {
 		dev_err(&intf->dev,
@@ -2016,11 +2036,6 @@ static int kvaser_usb_probe(struct usb_interface *intf,
 		return err;
 	}
 
-	dev_dbg(&intf->dev, "Firmware version: %d.%d.%d\n",
-		((dev->fw_version >> 24) & 0xff),
-		((dev->fw_version >> 16) & 0xff),
-		(dev->fw_version & 0xffff));
-
 	for (i = 0; i < dev->nchannels; i++) {
 		err = kvaser_usb_init_one(intf, id, i);
 		if (err) {

drivers/net/can/usb/peak_usb/pcan_ucan.h

@@ -26,8 +26,8 @@
 #define PUCAN_CMD_FILTER_STD		0x008
 #define PUCAN_CMD_TX_ABORT		0x009
 #define PUCAN_CMD_WR_ERR_CNT		0x00a
-#define PUCAN_CMD_RX_FRAME_ENABLE	0x00b
+#define PUCAN_CMD_SET_EN_OPTION		0x00b
-#define PUCAN_CMD_RX_FRAME_DISABLE	0x00c
+#define PUCAN_CMD_CLR_DIS_OPTION	0x00c
 #define PUCAN_CMD_END_OF_COLLECTION	0x3ff
 
 /* uCAN received messages list */
@@ -101,14 +101,15 @@ struct __packed pucan_wr_err_cnt {
 	u16	unused;
 };
 
-/* uCAN RX_FRAME_ENABLE command fields */
+/* uCAN SET_EN/CLR_DIS _OPTION command fields */
-#define PUCAN_FLTEXT_ERROR		0x0001
+#define PUCAN_OPTION_ERROR		0x0001
-#define PUCAN_FLTEXT_BUSLOAD		0x0002
+#define PUCAN_OPTION_BUSLOAD		0x0002
+#define PUCAN_OPTION_CANDFDISO		0x0004
 
-struct __packed pucan_filter_ext {
+struct __packed pucan_options {
 	__le16	opcode_channel;
 
-	__le16	ext_mask;
+	__le16	options;
 	u32	unused;
 };
 

drivers/net/can/usb/peak_usb/pcan_usb_fd.c

@@ -110,13 +110,13 @@ struct __packed pcan_ufd_led {
 	u8	unused[5];
 };
 
-/* Extended usage of uCAN commands CMD_RX_FRAME_xxxABLE for PCAN-USB Pro FD */
+/* Extended usage of uCAN commands CMD_xxx_xx_OPTION for PCAN-USB Pro FD */
 #define PCAN_UFD_FLTEXT_CALIBRATION	0x8000
 
-struct __packed pcan_ufd_filter_ext {
+struct __packed pcan_ufd_options {
 	__le16	opcode_channel;
 
-	__le16	ext_mask;
+	__le16	ucan_mask;
 	u16	unused;
 	__le16	usb_mask;
 };
@@ -251,6 +251,27 @@ static int pcan_usb_fd_build_restart_cmd(struct peak_usb_device *dev, u8 *buf)
 	/* moves the pointer forward */
 	pc += sizeof(struct pucan_wr_err_cnt);
 
+	/* add command to switch from ISO to non-ISO mode, if fw allows it */
+	if (dev->can.ctrlmode_supported & CAN_CTRLMODE_FD_NON_ISO) {
+		struct pucan_options *puo = (struct pucan_options *)pc;
+
+		puo->opcode_channel =
+			(dev->can.ctrlmode & CAN_CTRLMODE_FD_NON_ISO) ?
+			pucan_cmd_opcode_channel(dev,
+						 PUCAN_CMD_CLR_DIS_OPTION) :
+			pucan_cmd_opcode_channel(dev, PUCAN_CMD_SET_EN_OPTION);
+
+		puo->options = cpu_to_le16(PUCAN_OPTION_CANDFDISO);
+
+		/* to be sure that no other extended bits will be taken into
+		 * account
+		 */
+		puo->unused = 0;
+
+		/* moves the pointer forward */
+		pc += sizeof(struct pucan_options);
+	}
+
 	/* next, go back to operational mode */
 	cmd = (struct pucan_command *)pc;
 	cmd->opcode_channel = pucan_cmd_opcode_channel(dev,
@@ -321,21 +342,21 @@ static int pcan_usb_fd_set_filter_std(struct peak_usb_device *dev, int idx,
 	return pcan_usb_fd_send_cmd(dev, cmd);
 }
 
-/* set/unset notifications filter:
+/* set/unset options
  *
- *	onoff	sets(1)/unset(0) notifications
+ *	onoff	set(1)/unset(0) options
- *	mask	each bit defines a kind of notification to set/unset
+ *	mask	each bit defines a kind of options to set/unset
  */
-static int pcan_usb_fd_set_filter_ext(struct peak_usb_device *dev,
+static int pcan_usb_fd_set_options(struct peak_usb_device *dev,
-				      bool onoff, u16 ext_mask, u16 usb_mask)
+				   bool onoff, u16 ucan_mask, u16 usb_mask)
 {
-	struct pcan_ufd_filter_ext *cmd = pcan_usb_fd_cmd_buffer(dev);
+	struct pcan_ufd_options *cmd = pcan_usb_fd_cmd_buffer(dev);
 
 	cmd->opcode_channel = pucan_cmd_opcode_channel(dev,
-					(onoff) ? PUCAN_CMD_RX_FRAME_ENABLE :
+					(onoff) ? PUCAN_CMD_SET_EN_OPTION :
-						  PUCAN_CMD_RX_FRAME_DISABLE);
+						  PUCAN_CMD_CLR_DIS_OPTION);
 
-	cmd->ext_mask = cpu_to_le16(ext_mask);
+	cmd->ucan_mask = cpu_to_le16(ucan_mask);
 	cmd->usb_mask = cpu_to_le16(usb_mask);
 
 	/* send the command */
@@ -770,9 +791,9 @@ static int pcan_usb_fd_start(struct peak_usb_device *dev)
 				       &pcan_usb_pro_fd);
 
 		/* enable USB calibration messages */
-		err = pcan_usb_fd_set_filter_ext(dev, 1,
+		err = pcan_usb_fd_set_options(dev, 1,
-						 PUCAN_FLTEXT_ERROR,
+					      PUCAN_OPTION_ERROR,
-						 PCAN_UFD_FLTEXT_CALIBRATION);
+					      PCAN_UFD_FLTEXT_CALIBRATION);
 	}
 
 	pdev->usb_if->dev_opened_count++;
@@ -806,9 +827,9 @@ static int pcan_usb_fd_stop(struct peak_usb_device *dev)
 
 	/* turn off special msgs for that interface if no other dev opened */
 	if (pdev->usb_if->dev_opened_count == 1)
-		pcan_usb_fd_set_filter_ext(dev, 0,
+		pcan_usb_fd_set_options(dev, 0,
-					   PUCAN_FLTEXT_ERROR,
+					PUCAN_OPTION_ERROR,
-					   PCAN_UFD_FLTEXT_CALIBRATION);
+					PCAN_UFD_FLTEXT_CALIBRATION);
 	pdev->usb_if->dev_opened_count--;
 
 	return 0;
@@ -860,8 +881,14 @@ static int pcan_usb_fd_init(struct peak_usb_device *dev)
 			 pdev->usb_if->fw_info.fw_version[2],
 			 dev->adapter->ctrl_count);
 
-		/* the currently supported hw is non-ISO */
+		/* check for ability to switch between ISO/non-ISO modes */
-		dev->can.ctrlmode = CAN_CTRLMODE_FD_NON_ISO;
+		if (pdev->usb_if->fw_info.fw_version[0] >= 2) {
+			/* firmware >= 2.x supports ISO/non-ISO switching */
+			dev->can.ctrlmode_supported |= CAN_CTRLMODE_FD_NON_ISO;
+		} else {
+			/* firmware < 2.x only supports fixed(!) non-ISO */
+			dev->can.ctrlmode |= CAN_CTRLMODE_FD_NON_ISO;
+		}
 
 		/* tell the hardware the can driver is running */
 		err = pcan_usb_fd_drv_loaded(dev, 1);
@@ -937,9 +964,9 @@ static void pcan_usb_fd_exit(struct peak_usb_device *dev)
 	if (dev->ctrl_idx == 0) {
 		/* turn off calibration message if any device were opened */
 		if (pdev->usb_if->dev_opened_count > 0)
-			pcan_usb_fd_set_filter_ext(dev, 0,
+			pcan_usb_fd_set_options(dev, 0,
-						   PUCAN_FLTEXT_ERROR,
+						PUCAN_OPTION_ERROR,
-						   PCAN_UFD_FLTEXT_CALIBRATION);
+						PCAN_UFD_FLTEXT_CALIBRATION);
 
 		/* tell USB adapter that the driver is being unloaded */
 		pcan_usb_fd_drv_loaded(dev, 0);

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

@@ -1811,7 +1811,7 @@ struct bnx2x {
 	int			stats_state;
 
 	/* used for synchronization of concurrent threads statistics handling */
-	spinlock_t		stats_lock;
+	struct mutex		stats_lock;
 
 	/* used by dmae command loader */
 	struct dmae_command	stats_dmae;
@@ -1935,8 +1935,6 @@ struct bnx2x {
 
 	int fp_array_size;
 	u32 dump_preset_idx;
-	bool					stats_started;
-	struct semaphore			stats_sema;
 
 	u8					phys_port_id[ETH_ALEN];
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -129,8 +129,8 @@ struct bnx2x_mac_vals {
 	u32 xmac_val;
 	u32 emac_addr;
 	u32 emac_val;
-	u32 umac_addr;
+	u32 umac_addr[2];
-	u32 umac_val;
+	u32 umac_val[2];
 	u32 bmac_addr;
 	u32 bmac_val[2];
 };
@@ -7866,6 +7866,20 @@ int bnx2x_init_hw_func_cnic(struct bnx2x *bp)
 	return 0;
 }
 
+/* previous driver DMAE transaction may have occurred when pre-boot stage ended
+ * and boot began, or when kdump kernel was loaded. Either case would invalidate
+ * the addresses of the transaction, resulting in was-error bit set in the pci
+ * causing all hw-to-host pcie transactions to timeout. If this happened we want
+ * to clear the interrupt which detected this from the pglueb and the was done
+ * bit
+ */
+static void bnx2x_clean_pglue_errors(struct bnx2x *bp)
+{
+	if (!CHIP_IS_E1x(bp))
+		REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR,
+		       1 << BP_ABS_FUNC(bp));
+}
+
 static int bnx2x_init_hw_func(struct bnx2x *bp)
 {
 	int port = BP_PORT(bp);
@@ -7958,8 +7972,7 @@ static int bnx2x_init_hw_func(struct bnx2x *bp)
 
 	bnx2x_init_block(bp, BLOCK_PGLUE_B, init_phase);
 
-	if (!CHIP_IS_E1x(bp))
+	bnx2x_clean_pglue_errors(bp);
-		REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, func);
 
 	bnx2x_init_block(bp, BLOCK_ATC, init_phase);
 	bnx2x_init_block(bp, BLOCK_DMAE, init_phase);
@@ -10141,6 +10154,25 @@ static u32 bnx2x_get_pretend_reg(struct bnx2x *bp)
 	return base + (BP_ABS_FUNC(bp)) * stride;
 }
 
+static bool bnx2x_prev_unload_close_umac(struct bnx2x *bp,
+					 u8 port, u32 reset_reg,
+					 struct bnx2x_mac_vals *vals)
+{
+	u32 mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port;
+	u32 base_addr;
+
+	if (!(mask & reset_reg))
+		return false;
+
+	BNX2X_DEV_INFO("Disable umac Rx %02x\n", port);
+	base_addr = port ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
+	vals->umac_addr[port] = base_addr + UMAC_REG_COMMAND_CONFIG;
+	vals->umac_val[port] = REG_RD(bp, vals->umac_addr[port]);
+	REG_WR(bp, vals->umac_addr[port], 0);
+
+	return true;
+}
+
 static void bnx2x_prev_unload_close_mac(struct bnx2x *bp,
 					struct bnx2x_mac_vals *vals)
 {
@@ -10149,10 +10181,7 @@ static void bnx2x_prev_unload_close_mac(struct bnx2x *bp,
 	u8 port = BP_PORT(bp);
 
 	/* reset addresses as they also mark which values were changed */
-	vals->bmac_addr = 0;
+	memset(vals, 0, sizeof(*vals));
-	vals->umac_addr = 0;
-	vals->xmac_addr = 0;
-	vals->emac_addr = 0;
 
 	reset_reg = REG_RD(bp, MISC_REG_RESET_REG_2);
 
@@ -10201,15 +10230,11 @@ static void bnx2x_prev_unload_close_mac(struct bnx2x *bp,
 			REG_WR(bp, vals->xmac_addr, 0);
 			mac_stopped = true;
 		}
-		mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port;
+
-		if (mask & reset_reg) {
+		mac_stopped |= bnx2x_prev_unload_close_umac(bp, 0,
-			BNX2X_DEV_INFO("Disable umac Rx\n");
+							    reset_reg, vals);
-			base_addr = BP_PORT(bp) ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
+		mac_stopped |= bnx2x_prev_unload_close_umac(bp, 1,
-			vals->umac_addr = base_addr + UMAC_REG_COMMAND_CONFIG;
+							    reset_reg, vals);
-			vals->umac_val = REG_RD(bp, vals->umac_addr);
-			REG_WR(bp, vals->umac_addr, 0);
-			mac_stopped = true;
-		}
 	}
 
 	if (mac_stopped)
@@ -10505,8 +10530,11 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp)
 		/* Close the MAC Rx to prevent BRB from filling up */
 		bnx2x_prev_unload_close_mac(bp, &mac_vals);
 
-		/* close LLH filters towards the BRB */
+		/* close LLH filters for both ports towards the BRB */
 		bnx2x_set_rx_filter(&bp->link_params, 0);
+		bp->link_params.port ^= 1;
+		bnx2x_set_rx_filter(&bp->link_params, 0);
+		bp->link_params.port ^= 1;
 
 		/* Check if the UNDI driver was previously loaded */
 		if (bnx2x_prev_is_after_undi(bp)) {
@@ -10553,8 +10581,10 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp)
 
 	if (mac_vals.xmac_addr)
 		REG_WR(bp, mac_vals.xmac_addr, mac_vals.xmac_val);
-	if (mac_vals.umac_addr)
+	if (mac_vals.umac_addr[0])
-		REG_WR(bp, mac_vals.umac_addr, mac_vals.umac_val);
+		REG_WR(bp, mac_vals.umac_addr[0], mac_vals.umac_val[0]);
+	if (mac_vals.umac_addr[1])
+		REG_WR(bp, mac_vals.umac_addr[1], mac_vals.umac_val[1]);
 	if (mac_vals.emac_addr)
 		REG_WR(bp, mac_vals.emac_addr, mac_vals.emac_val);
 	if (mac_vals.bmac_addr) {
@@ -10571,26 +10601,6 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp)
 	return bnx2x_prev_mcp_done(bp);
 }
 
-/* previous driver DMAE transaction may have occurred when pre-boot stage ended
- * and boot began, or when kdump kernel was loaded. Either case would invalidate
- * the addresses of the transaction, resulting in was-error bit set in the pci
- * causing all hw-to-host pcie transactions to timeout. If this happened we want
- * to clear the interrupt which detected this from the pglueb and the was done
- * bit
- */
-static void bnx2x_prev_interrupted_dmae(struct bnx2x *bp)
-{
-	if (!CHIP_IS_E1x(bp)) {
-		u32 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS);
-		if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) {
-			DP(BNX2X_MSG_SP,
-			   "'was error' bit was found to be set in pglueb upon startup. Clearing\n");
-			REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR,
-			       1 << BP_FUNC(bp));
-		}
-	}
-}
-
 static int bnx2x_prev_unload(struct bnx2x *bp)
 {
 	int time_counter = 10;
@@ -10600,7 +10610,7 @@ static int bnx2x_prev_unload(struct bnx2x *bp)
 	/* clear hw from errors which may have resulted from an interrupted
 	 * dmae transaction.
 	 */
-	bnx2x_prev_interrupted_dmae(bp);
+	bnx2x_clean_pglue_errors(bp);
 
 	/* Release previously held locks */
 	hw_lock_reg = (BP_FUNC(bp) <= 5) ?
@@ -12037,9 +12047,8 @@ static int bnx2x_init_bp(struct bnx2x *bp)
 	mutex_init(&bp->port.phy_mutex);
 	mutex_init(&bp->fw_mb_mutex);
 	mutex_init(&bp->drv_info_mutex);
+	mutex_init(&bp->stats_lock);
 	bp->drv_info_mng_owner = false;
-	spin_lock_init(&bp->stats_lock);
-	sema_init(&bp->stats_sema, 1);
 
 	INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task);
 	INIT_DELAYED_WORK(&bp->sp_rtnl_task, bnx2x_sp_rtnl_task);
@@ -13668,9 +13677,9 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
 	cancel_delayed_work_sync(&bp->sp_task);
 	cancel_delayed_work_sync(&bp->period_task);
 
-	spin_lock_bh(&bp->stats_lock);
+	mutex_lock(&bp->stats_lock);
 	bp->stats_state = STATS_STATE_DISABLED;
-	spin_unlock_bh(&bp->stats_lock);
+	mutex_unlock(&bp->stats_lock);
 
 	bnx2x_save_statistics(bp);
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c

@@ -2238,7 +2238,9 @@ int bnx2x_vf_close(struct bnx2x *bp, struct bnx2x_virtf *vf)
 
 		cookie.vf = vf;
 		cookie.state = VF_ACQUIRED;
-		bnx2x_stats_safe_exec(bp, bnx2x_set_vf_state, &cookie);
+		rc = bnx2x_stats_safe_exec(bp, bnx2x_set_vf_state, &cookie);
+		if (rc)
+			goto op_err;
 	}
 
 	DP(BNX2X_MSG_IOV, "set state to acquired\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c

@@ -123,36 +123,28 @@ static void bnx2x_dp_stats(struct bnx2x *bp)
  */
 static void bnx2x_storm_stats_post(struct bnx2x *bp)
 {
-	if (!bp->stats_pending) {
+	int rc;
-		int rc;
 
-		spin_lock_bh(&bp->stats_lock);
+	if (bp->stats_pending)
+		return;
 
-		if (bp->stats_pending) {
+	bp->fw_stats_req->hdr.drv_stats_counter =
-			spin_unlock_bh(&bp->stats_lock);
+		cpu_to_le16(bp->stats_counter++);
-			return;
-		}
 
-		bp->fw_stats_req->hdr.drv_stats_counter =
+	DP(BNX2X_MSG_STATS, "Sending statistics ramrod %d\n",
-			cpu_to_le16(bp->stats_counter++);
+	   le16_to_cpu(bp->fw_stats_req->hdr.drv_stats_counter));
 
-		DP(BNX2X_MSG_STATS, "Sending statistics ramrod %d\n",
+	/* adjust the ramrod to include VF queues statistics */
-		   le16_to_cpu(bp->fw_stats_req->hdr.drv_stats_counter));
+	bnx2x_iov_adjust_stats_req(bp);
+	bnx2x_dp_stats(bp);
 
-		/* adjust the ramrod to include VF queues statistics */
+	/* send FW stats ramrod */
-		bnx2x_iov_adjust_stats_req(bp);
+	rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_STAT_QUERY, 0,
-		bnx2x_dp_stats(bp);
+			   U64_HI(bp->fw_stats_req_mapping),
-
+			   U64_LO(bp->fw_stats_req_mapping),
-		/* send FW stats ramrod */
+			   NONE_CONNECTION_TYPE);
-		rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_STAT_QUERY, 0,
+	if (rc == 0)
-				   U64_HI(bp->fw_stats_req_mapping),
+		bp->stats_pending = 1;
-				   U64_LO(bp->fw_stats_req_mapping),
-				   NONE_CONNECTION_TYPE);
-		if (rc == 0)
-			bp->stats_pending = 1;
-
-		spin_unlock_bh(&bp->stats_lock);
-	}
 }
 
 static void bnx2x_hw_stats_post(struct bnx2x *bp)
@@ -221,7 +213,7 @@ static void bnx2x_stats_comp(struct bnx2x *bp)
  */
 
 /* should be called under stats_sema */
-static void __bnx2x_stats_pmf_update(struct bnx2x *bp)
+static void bnx2x_stats_pmf_update(struct bnx2x *bp)
 {
 	struct dmae_command *dmae;
 	u32 opcode;
@@ -519,7 +511,7 @@ static void bnx2x_func_stats_init(struct bnx2x *bp)
 }
 
 /* should be called under stats_sema */
-static void __bnx2x_stats_start(struct bnx2x *bp)
+static void bnx2x_stats_start(struct bnx2x *bp)
 {
 	if (IS_PF(bp)) {
 		if (bp->port.pmf)
@@ -531,34 +523,13 @@ static void __bnx2x_stats_start(struct bnx2x *bp)
 		bnx2x_hw_stats_post(bp);
 		bnx2x_storm_stats_post(bp);
 	}
-
-	bp->stats_started = true;
-}
-
-static void bnx2x_stats_start(struct bnx2x *bp)
-{
-	if (down_timeout(&bp->stats_sema, HZ/10))
-		BNX2X_ERR("Unable to acquire stats lock\n");
-	__bnx2x_stats_start(bp);
-	up(&bp->stats_sema);
 }
 
 static void bnx2x_stats_pmf_start(struct bnx2x *bp)
 {
-	if (down_timeout(&bp->stats_sema, HZ/10))
-		BNX2X_ERR("Unable to acquire stats lock\n");
 	bnx2x_stats_comp(bp);
-	__bnx2x_stats_pmf_update(bp);
+	bnx2x_stats_pmf_update(bp);
-	__bnx2x_stats_start(bp);
+	bnx2x_stats_start(bp);
-	up(&bp->stats_sema);
-}
-
-static void bnx2x_stats_pmf_update(struct bnx2x *bp)
-{
-	if (down_timeout(&bp->stats_sema, HZ/10))
-		BNX2X_ERR("Unable to acquire stats lock\n");
-	__bnx2x_stats_pmf_update(bp);
-	up(&bp->stats_sema);
 }
 
 static void bnx2x_stats_restart(struct bnx2x *bp)
@@ -568,11 +539,9 @@ static void bnx2x_stats_restart(struct bnx2x *bp)
 	 */
 	if (IS_VF(bp))
 		return;
-	if (down_timeout(&bp->stats_sema, HZ/10))
+
-		BNX2X_ERR("Unable to acquire stats lock\n");
 	bnx2x_stats_comp(bp);
-	__bnx2x_stats_start(bp);
+	bnx2x_stats_start(bp);
-	up(&bp->stats_sema);
 }
 
 static void bnx2x_bmac_stats_update(struct bnx2x *bp)
@@ -1246,18 +1215,12 @@ static void bnx2x_stats_update(struct bnx2x *bp)
 {
 	u32 *stats_comp = bnx2x_sp(bp, stats_comp);
 
-	/* we run update from timer context, so give up
+	if (bnx2x_edebug_stats_stopped(bp))
-	 * if somebody is in the middle of transition
-	 */
-	if (down_trylock(&bp->stats_sema))
 		return;
 
-	if (bnx2x_edebug_stats_stopped(bp) || !bp->stats_started)
-		goto out;
-
 	if (IS_PF(bp)) {
 		if (*stats_comp != DMAE_COMP_VAL)
-			goto out;
+			return;
 
 		if (bp->port.pmf)
 			bnx2x_hw_stats_update(bp);
@@ -1267,7 +1230,7 @@ static void bnx2x_stats_update(struct bnx2x *bp)
 				BNX2X_ERR("storm stats were not updated for 3 times\n");
 				bnx2x_panic();
 			}
-			goto out;
+			return;
 		}
 	} else {
 		/* vf doesn't collect HW statistics, and doesn't get completions
@@ -1281,7 +1244,7 @@ static void bnx2x_stats_update(struct bnx2x *bp)
 
 	/* vf is done */
 	if (IS_VF(bp))
-		goto out;
+		return;
 
 	if (netif_msg_timer(bp)) {
 		struct bnx2x_eth_stats *estats = &bp->eth_stats;
@@ -1292,9 +1255,6 @@ static void bnx2x_stats_update(struct bnx2x *bp)
 
 	bnx2x_hw_stats_post(bp);
 	bnx2x_storm_stats_post(bp);
-
-out:
-	up(&bp->stats_sema);
 }
 
 static void bnx2x_port_stats_stop(struct bnx2x *bp)
@@ -1358,12 +1318,7 @@ static void bnx2x_port_stats_stop(struct bnx2x *bp)
 
 static void bnx2x_stats_stop(struct bnx2x *bp)
 {
-	int update = 0;
+	bool update = false;
-
-	if (down_timeout(&bp->stats_sema, HZ/10))
-		BNX2X_ERR("Unable to acquire stats lock\n");
-
-	bp->stats_started = false;
 
 	bnx2x_stats_comp(bp);
 
@@ -1381,8 +1336,6 @@ static void bnx2x_stats_stop(struct bnx2x *bp)
 		bnx2x_hw_stats_post(bp);
 		bnx2x_stats_comp(bp);
 	}
-
-	up(&bp->stats_sema);
 }
 
 static void bnx2x_stats_do_nothing(struct bnx2x *bp)
@@ -1410,18 +1363,28 @@ static const struct {
 
 void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event)
 {
-	enum bnx2x_stats_state state;
+	enum bnx2x_stats_state state = bp->stats_state;
-	void (*action)(struct bnx2x *bp);
+
 	if (unlikely(bp->panic))
 		return;
 
-	spin_lock_bh(&bp->stats_lock);
+	/* Statistics update run from timer context, and we don't want to stop
-	state = bp->stats_state;
+	 * that context in case someone is in the middle of a transition.
-	bp->stats_state = bnx2x_stats_stm[state][event].next_state;
+	 * For other events, wait a bit until lock is taken.
-	action = bnx2x_stats_stm[state][event].action;
+	 */
-	spin_unlock_bh(&bp->stats_lock);
+	if (!mutex_trylock(&bp->stats_lock)) {
+		if (event == STATS_EVENT_UPDATE)
+			return;
 
-	action(bp);
+		DP(BNX2X_MSG_STATS,
+		   "Unlikely stats' lock contention [event %d]\n", event);
+		mutex_lock(&bp->stats_lock);
+	}
+
+	bnx2x_stats_stm[state][event].action(bp);
+	bp->stats_state = bnx2x_stats_stm[state][event].next_state;
+
+	mutex_unlock(&bp->stats_lock);
 
 	if ((event != STATS_EVENT_UPDATE) || netif_msg_timer(bp))
 		DP(BNX2X_MSG_STATS, "state %d -> event %d -> state %d\n",
@@ -1998,13 +1961,34 @@ void bnx2x_afex_collect_stats(struct bnx2x *bp, void *void_afex_stats,
 	}
 }
 
-void bnx2x_stats_safe_exec(struct bnx2x *bp,
+int bnx2x_stats_safe_exec(struct bnx2x *bp,
-			   void (func_to_exec)(void *cookie),
+			  void (func_to_exec)(void *cookie),
-			   void *cookie){
+			  void *cookie)
-	if (down_timeout(&bp->stats_sema, HZ/10))
+{
-		BNX2X_ERR("Unable to acquire stats lock\n");
+	int cnt = 10, rc = 0;
+
+	/* Wait for statistics to end [while blocking further requests],
+	 * then run supplied function 'safely'.
+	 */
+	mutex_lock(&bp->stats_lock);
+
 	bnx2x_stats_comp(bp);
+	while (bp->stats_pending && cnt--)
+		if (bnx2x_storm_stats_update(bp))
+			usleep_range(1000, 2000);
+	if (bp->stats_pending) {
+		BNX2X_ERR("Failed to wait for stats pending to clear [possibly FW is stuck]\n");
+		rc = -EBUSY;
+		goto out;
+	}
+
 	func_to_exec(cookie);
-	__bnx2x_stats_start(bp);
+
-	up(&bp->stats_sema);
+out:
+	/* No need to restart statistics - if they're enabled, the timer
+	 * will restart the statistics.
+	 */
+	mutex_unlock(&bp->stats_lock);
+
+	return rc;
 }

drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h

@@ -539,9 +539,9 @@ struct bnx2x;
 void bnx2x_memset_stats(struct bnx2x *bp);
 void bnx2x_stats_init(struct bnx2x *bp);
 void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event);
-void bnx2x_stats_safe_exec(struct bnx2x *bp,
+int bnx2x_stats_safe_exec(struct bnx2x *bp,
-			   void (func_to_exec)(void *cookie),
+			  void (func_to_exec)(void *cookie),
-			   void *cookie);
+			  void *cookie);
 
 /**
  * bnx2x_save_statistics - save statistics when unloading.

drivers/net/ethernet/chelsio/cxgb4/cxgb4.h

@@ -376,8 +376,6 @@ enum {
 enum {
 	INGQ_EXTRAS = 2,        /* firmware event queue and */
 				/*   forwarded interrupts */
-	MAX_EGRQ = MAX_ETH_QSETS*2 + MAX_OFLD_QSETS*2
-		   + MAX_CTRL_QUEUES + MAX_RDMA_QUEUES + MAX_ISCSI_QUEUES,
 	MAX_INGQ = MAX_ETH_QSETS + MAX_OFLD_QSETS + MAX_RDMA_QUEUES
 		   + MAX_RDMA_CIQS + MAX_ISCSI_QUEUES + INGQ_EXTRAS,
 };
@@ -616,11 +614,13 @@ struct sge {
 	unsigned int idma_qid[2];   /* SGE IDMA Hung Ingress Queue ID */
 
 	unsigned int egr_start;
+	unsigned int egr_sz;
 	unsigned int ingr_start;
-	void *egr_map[MAX_EGRQ];    /* qid->queue egress queue map */
+	unsigned int ingr_sz;
-	struct sge_rspq *ingr_map[MAX_INGQ]; /* qid->queue ingress queue map */
+	void **egr_map;    /* qid->queue egress queue map */
-	DECLARE_BITMAP(starving_fl, MAX_EGRQ);
+	struct sge_rspq **ingr_map; /* qid->queue ingress queue map */
-	DECLARE_BITMAP(txq_maperr, MAX_EGRQ);
+	unsigned long *starving_fl;
+	unsigned long *txq_maperr;
 	struct timer_list rx_timer; /* refills starving FLs */
 	struct timer_list tx_timer; /* checks Tx queues */
 };
@@ -1136,6 +1136,8 @@ int cxgb4_t4_bar2_sge_qregs(struct adapter *adapter,
 
 unsigned int qtimer_val(const struct adapter *adap,
 			const struct sge_rspq *q);
+
+int t4_init_devlog_params(struct adapter *adapter);
 int t4_init_sge_params(struct adapter *adapter);
 int t4_init_tp_params(struct adapter *adap);
 int t4_filter_field_shift(const struct adapter *adap, int filter_sel);

drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c

@@ -670,9 +670,13 @@ static int cctrl_tbl_show(struct seq_file *seq, void *v)
 		"0.9375" };
 
 	int i;
-	u16 incr[NMTUS][NCCTRL_WIN];
+	u16 (*incr)[NCCTRL_WIN];
 	struct adapter *adap = seq->private;
 
+	incr = kmalloc(sizeof(*incr) * NMTUS, GFP_KERNEL);
+	if (!incr)
+		return -ENOMEM;
+
 	t4_read_cong_tbl(adap, incr);
 
 	for (i = 0; i < NCCTRL_WIN; ++i) {
@@ -685,6 +689,8 @@ static int cctrl_tbl_show(struct seq_file *seq, void *v)
 			   adap->params.a_wnd[i],
 			   dec_fac[adap->params.b_wnd[i]]);
 	}
+
+	kfree(incr);
 	return 0;
 }
 

drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c

@@ -920,7 +920,7 @@ static void quiesce_rx(struct adapter *adap)
 {
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(adap->sge.ingr_map); i++) {
+	for (i = 0; i < adap->sge.ingr_sz; i++) {
 		struct sge_rspq *q = adap->sge.ingr_map[i];
 
 		if (q && q->handler) {
@@ -934,6 +934,21 @@ static void quiesce_rx(struct adapter *adap)
 	}
 }
 
+/* Disable interrupt and napi handler */
+static void disable_interrupts(struct adapter *adap)
+{
+	if (adap->flags & FULL_INIT_DONE) {
+		t4_intr_disable(adap);
+		if (adap->flags & USING_MSIX) {
+			free_msix_queue_irqs(adap);
+			free_irq(adap->msix_info[0].vec, adap);
+		} else {
+			free_irq(adap->pdev->irq, adap);
+		}
+		quiesce_rx(adap);
+	}
+}
+
 /*
  * Enable NAPI scheduling and interrupt generation for all Rx queues.
  */
@@ -941,7 +956,7 @@ static void enable_rx(struct adapter *adap)
 {
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(adap->sge.ingr_map); i++) {
+	for (i = 0; i < adap->sge.ingr_sz; i++) {
 		struct sge_rspq *q = adap->sge.ingr_map[i];
 
 		if (!q)
@@ -970,8 +985,8 @@ static int setup_sge_queues(struct adapter *adap)
 	int err, msi_idx, i, j;
 	struct sge *s = &adap->sge;
 
-	bitmap_zero(s->starving_fl, MAX_EGRQ);
+	bitmap_zero(s->starving_fl, s->egr_sz);
-	bitmap_zero(s->txq_maperr, MAX_EGRQ);
+	bitmap_zero(s->txq_maperr, s->egr_sz);
 
 	if (adap->flags & USING_MSIX)
 		msi_idx = 1;         /* vector 0 is for non-queue interrupts */
@@ -983,6 +998,19 @@ static int setup_sge_queues(struct adapter *adap)
 		msi_idx = -((int)s->intrq.abs_id + 1);
 	}
 
+	/* NOTE: If you add/delete any Ingress/Egress Queue allocations in here,
+	 * don't forget to update the following which need to be
+	 * synchronized to and changes here.
+	 *
+	 * 1. The calculations of MAX_INGQ in cxgb4.h.
+	 *
+	 * 2. Update enable_msix/name_msix_vecs/request_msix_queue_irqs
+	 *    to accommodate any new/deleted Ingress Queues
+	 *    which need MSI-X Vectors.
+	 *
+	 * 3. Update sge_qinfo_show() to include information on the
+	 *    new/deleted queues.
+	 */
 	err = t4_sge_alloc_rxq(adap, &s->fw_evtq, true, adap->port[0],
 			       msi_idx, NULL, fwevtq_handler);
 	if (err) {
@@ -4244,19 +4272,12 @@ static int cxgb_up(struct adapter *adap)
 
 static void cxgb_down(struct adapter *adapter)
 {
-	t4_intr_disable(adapter);
 	cancel_work_sync(&adapter->tid_release_task);
 	cancel_work_sync(&adapter->db_full_task);
 	cancel_work_sync(&adapter->db_drop_task);
 	adapter->tid_release_task_busy = false;
 	adapter->tid_release_head = NULL;
 
-	if (adapter->flags & USING_MSIX) {
-		free_msix_queue_irqs(adapter);
-		free_irq(adapter->msix_info[0].vec, adapter);
-	} else
-		free_irq(adapter->pdev->irq, adapter);
-	quiesce_rx(adapter);
 	t4_sge_stop(adapter);
 	t4_free_sge_resources(adapter);
 	adapter->flags &= ~FULL_INIT_DONE;
@@ -4733,8 +4754,9 @@ static int adap_init1(struct adapter *adap, struct fw_caps_config_cmd *c)
 	if (ret < 0)
 		return ret;
 
-	ret = t4_cfg_pfvf(adap, adap->fn, adap->fn, 0, MAX_EGRQ, 64, MAX_INGQ,
+	ret = t4_cfg_pfvf(adap, adap->fn, adap->fn, 0, adap->sge.egr_sz, 64,
-			  0, 0, 4, 0xf, 0xf, 16, FW_CMD_CAP_PF, FW_CMD_CAP_PF);
+			  MAX_INGQ, 0, 0, 4, 0xf, 0xf, 16, FW_CMD_CAP_PF,
+			  FW_CMD_CAP_PF);
 	if (ret < 0)
 		return ret;
 
@@ -5088,10 +5110,15 @@ static int adap_init0(struct adapter *adap)
 	enum dev_state state;
 	u32 params[7], val[7];
 	struct fw_caps_config_cmd caps_cmd;
-	struct fw_devlog_cmd devlog_cmd;
-	u32 devlog_meminfo;
 	int reset = 1;
 
+	/* Grab Firmware Device Log parameters as early as possible so we have
+	 * access to it for debugging, etc.
+	 */
+	ret = t4_init_devlog_params(adap);
+	if (ret < 0)
+		return ret;
+
 	/* Contact FW, advertising Master capability */
 	ret = t4_fw_hello(adap, adap->mbox, adap->mbox, MASTER_MAY, &state);
 	if (ret < 0) {
@@ -5169,30 +5196,6 @@ static int adap_init0(struct adapter *adap)
 	if (ret < 0)
 		goto bye;
 
-	/* Read firmware device log parameters.  We really need to find a way
-	 * to get these parameters initialized with some default values (which
-	 * are likely to be correct) for the case where we either don't
-	 * attache to the firmware or it's crashed when we probe the adapter.
-	 * That way we'll still be able to perform early firmware startup
-	 * debugging ...  If the request to get the Firmware's Device Log
-	 * parameters fails, we'll live so we don't make that a fatal error.
-	 */
-	memset(&devlog_cmd, 0, sizeof(devlog_cmd));
-	devlog_cmd.op_to_write = htonl(FW_CMD_OP_V(FW_DEVLOG_CMD) |
-				       FW_CMD_REQUEST_F | FW_CMD_READ_F);
-	devlog_cmd.retval_len16 = htonl(FW_LEN16(devlog_cmd));
-	ret = t4_wr_mbox(adap, adap->mbox, &devlog_cmd, sizeof(devlog_cmd),
-			 &devlog_cmd);
-	if (ret == 0) {
-		devlog_meminfo =
-			ntohl(devlog_cmd.memtype_devlog_memaddr16_devlog);
-		adap->params.devlog.memtype =
-			FW_DEVLOG_CMD_MEMTYPE_DEVLOG_G(devlog_meminfo);
-		adap->params.devlog.start =
-			FW_DEVLOG_CMD_MEMADDR16_DEVLOG_G(devlog_meminfo) << 4;
-		adap->params.devlog.size = ntohl(devlog_cmd.memsize_devlog);
-	}
-
 	/*
 	 * Find out what ports are available to us.  Note that we need to do
 	 * this before calling adap_init0_no_config() since it needs nports
@@ -5293,6 +5296,51 @@ static int adap_init0(struct adapter *adap)
 	adap->tids.nftids = val[4] - val[3] + 1;
 	adap->sge.ingr_start = val[5];
 
+	/* qids (ingress/egress) returned from firmware can be anywhere
+	 * in the range from EQ(IQFLINT)_START to EQ(IQFLINT)_END.
+	 * Hence driver needs to allocate memory for this range to
+	 * store the queue info. Get the highest IQFLINT/EQ index returned
+	 * in FW_EQ_*_CMD.alloc command.
+	 */
+	params[0] = FW_PARAM_PFVF(EQ_END);
+	params[1] = FW_PARAM_PFVF(IQFLINT_END);
+	ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, params, val);
+	if (ret < 0)
+		goto bye;
+	adap->sge.egr_sz = val[0] - adap->sge.egr_start + 1;
+	adap->sge.ingr_sz = val[1] - adap->sge.ingr_start + 1;
+
+	adap->sge.egr_map = kcalloc(adap->sge.egr_sz,
+				    sizeof(*adap->sge.egr_map), GFP_KERNEL);
+	if (!adap->sge.egr_map) {
+		ret = -ENOMEM;
+		goto bye;
+	}
+
+	adap->sge.ingr_map = kcalloc(adap->sge.ingr_sz,
+				     sizeof(*adap->sge.ingr_map), GFP_KERNEL);
+	if (!adap->sge.ingr_map) {
+		ret = -ENOMEM;
+		goto bye;
+	}
+
+	/* Allocate the memory for the vaious egress queue bitmaps
+	 * ie starving_fl and txq_maperr.
+	 */
+	adap->sge.starving_fl =	kcalloc(BITS_TO_LONGS(adap->sge.egr_sz),
+					sizeof(long), GFP_KERNEL);
+	if (!adap->sge.starving_fl) {
+		ret = -ENOMEM;
+		goto bye;
+	}
+
+	adap->sge.txq_maperr = kcalloc(BITS_TO_LONGS(adap->sge.egr_sz),
+				       sizeof(long), GFP_KERNEL);
+	if (!adap->sge.txq_maperr) {
+		ret = -ENOMEM;
+		goto bye;
+	}
+
 	params[0] = FW_PARAM_PFVF(CLIP_START);
 	params[1] = FW_PARAM_PFVF(CLIP_END);
 	ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2, params, val);
@@ -5501,6 +5549,10 @@ static int adap_init0(struct adapter *adap)
 	 * happened to HW/FW, stop issuing commands.
 	 */
 bye:
+	kfree(adap->sge.egr_map);
+	kfree(adap->sge.ingr_map);
+	kfree(adap->sge.starving_fl);
+	kfree(adap->sge.txq_maperr);
 	if (ret != -ETIMEDOUT && ret != -EIO)
 		t4_fw_bye(adap, adap->mbox);
 	return ret;
@@ -5528,6 +5580,7 @@ static pci_ers_result_t eeh_err_detected(struct pci_dev *pdev,
 		netif_carrier_off(dev);
 	}
 	spin_unlock(&adap->stats_lock);
+	disable_interrupts(adap);
 	if (adap->flags & FULL_INIT_DONE)
 		cxgb_down(adap);
 	rtnl_unlock();
@@ -5912,6 +5965,10 @@ static void free_some_resources(struct adapter *adapter)
 
 	t4_free_mem(adapter->l2t);
 	t4_free_mem(adapter->tids.tid_tab);
+	kfree(adapter->sge.egr_map);
+	kfree(adapter->sge.ingr_map);
+	kfree(adapter->sge.starving_fl);
+	kfree(adapter->sge.txq_maperr);
 	disable_msi(adapter);
 
 	for_each_port(adapter, i)
@@ -6237,6 +6294,8 @@ static void remove_one(struct pci_dev *pdev)
 		if (is_offload(adapter))
 			detach_ulds(adapter);
 
+		disable_interrupts(adapter);
+
 		for_each_port(adapter, i)
 			if (adapter->port[i]->reg_state == NETREG_REGISTERED)
 				unregister_netdev(adapter->port[i]);

drivers/net/ethernet/chelsio/cxgb4/sge.c

@@ -2171,7 +2171,7 @@ static void sge_rx_timer_cb(unsigned long data)
 	struct adapter *adap = (struct adapter *)data;
 	struct sge *s = &adap->sge;
 
-	for (i = 0; i < ARRAY_SIZE(s->starving_fl); i++)
+	for (i = 0; i < BITS_TO_LONGS(s->egr_sz); i++)
 		for (m = s->starving_fl[i]; m; m &= m - 1) {
 			struct sge_eth_rxq *rxq;
 			unsigned int id = __ffs(m) + i * BITS_PER_LONG;
@@ -2259,7 +2259,7 @@ static void sge_tx_timer_cb(unsigned long data)
 	struct adapter *adap = (struct adapter *)data;
 	struct sge *s = &adap->sge;
 
-	for (i = 0; i < ARRAY_SIZE(s->txq_maperr); i++)
+	for (i = 0; i < BITS_TO_LONGS(s->egr_sz); i++)
 		for (m = s->txq_maperr[i]; m; m &= m - 1) {
 			unsigned long id = __ffs(m) + i * BITS_PER_LONG;
 			struct sge_ofld_txq *txq = s->egr_map[id];
@@ -2741,7 +2741,8 @@ void t4_free_sge_resources(struct adapter *adap)
 		free_rspq_fl(adap, &adap->sge.intrq, NULL);
 
 	/* clear the reverse egress queue map */
-	memset(adap->sge.egr_map, 0, sizeof(adap->sge.egr_map));
+	memset(adap->sge.egr_map, 0,
+	       adap->sge.egr_sz * sizeof(*adap->sge.egr_map));
 }
 
 void t4_sge_start(struct adapter *adap)

drivers/net/ethernet/chelsio/cxgb4/t4_hw.c

@@ -4458,6 +4458,59 @@ int cxgb4_t4_bar2_sge_qregs(struct adapter *adapter,
 	return 0;
 }
 
+/**
+ *	t4_init_devlog_params - initialize adapter->params.devlog
+ *	@adap: the adapter
+ *
+ *	Initialize various fields of the adapter's Firmware Device Log
+ *	Parameters structure.
+ */
+int t4_init_devlog_params(struct adapter *adap)
+{
+	struct devlog_params *dparams = &adap->params.devlog;
+	u32 pf_dparams;
+	unsigned int devlog_meminfo;
+	struct fw_devlog_cmd devlog_cmd;
+	int ret;
+
+	/* If we're dealing with newer firmware, the Device Log Paramerters
+	 * are stored in a designated register which allows us to access the
+	 * Device Log even if we can't talk to the firmware.
+	 */
+	pf_dparams =
+		t4_read_reg(adap, PCIE_FW_REG(PCIE_FW_PF_A, PCIE_FW_PF_DEVLOG));
+	if (pf_dparams) {
+		unsigned int nentries, nentries128;
+
+		dparams->memtype = PCIE_FW_PF_DEVLOG_MEMTYPE_G(pf_dparams);
+		dparams->start = PCIE_FW_PF_DEVLOG_ADDR16_G(pf_dparams) << 4;
+
+		nentries128 = PCIE_FW_PF_DEVLOG_NENTRIES128_G(pf_dparams);
+		nentries = (nentries128 + 1) * 128;
+		dparams->size = nentries * sizeof(struct fw_devlog_e);
+
+		return 0;
+	}
+
+	/* Otherwise, ask the firmware for it's Device Log Parameters.
+	 */
+	memset(&devlog_cmd, 0, sizeof(devlog_cmd));
+	devlog_cmd.op_to_write = htonl(FW_CMD_OP_V(FW_DEVLOG_CMD) |
+				       FW_CMD_REQUEST_F | FW_CMD_READ_F);
+	devlog_cmd.retval_len16 = htonl(FW_LEN16(devlog_cmd));
+	ret = t4_wr_mbox(adap, adap->mbox, &devlog_cmd, sizeof(devlog_cmd),
+			 &devlog_cmd);
+	if (ret)
+		return ret;
+
+	devlog_meminfo = ntohl(devlog_cmd.memtype_devlog_memaddr16_devlog);
+	dparams->memtype = FW_DEVLOG_CMD_MEMTYPE_DEVLOG_G(devlog_meminfo);
+	dparams->start = FW_DEVLOG_CMD_MEMADDR16_DEVLOG_G(devlog_meminfo) << 4;
+	dparams->size = ntohl(devlog_cmd.memsize_devlog);
+
+	return 0;
+}
+
 /**
  *	t4_init_sge_params - initialize adap->params.sge
  *	@adapter: the adapter

drivers/net/ethernet/chelsio/cxgb4/t4_regs.h

@@ -63,6 +63,8 @@
 #define MC_BIST_STATUS_REG(reg_addr, idx) ((reg_addr) + (idx) * 4)
 #define EDC_BIST_STATUS_REG(reg_addr, idx) ((reg_addr) + (idx) * 4)
 
+#define PCIE_FW_REG(reg_addr, idx) ((reg_addr) + (idx) * 4)
+
 #define SGE_PF_KDOORBELL_A 0x0
 
 #define QID_S    15
@@ -707,6 +709,7 @@
 #define PFNUM_V(x) ((x) << PFNUM_S)
 
 #define PCIE_FW_A 0x30b8
+#define PCIE_FW_PF_A 0x30bc
 
 #define PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS_A 0x5908
 

drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h

@@ -101,7 +101,7 @@ enum fw_wr_opcodes {
 	FW_RI_BIND_MW_WR               = 0x18,
 	FW_RI_FR_NSMR_WR               = 0x19,
 	FW_RI_INV_LSTAG_WR             = 0x1a,
-	FW_LASTC2E_WR                  = 0x40
+	FW_LASTC2E_WR                  = 0x70
 };
 
 struct fw_wr_hdr {
@@ -993,6 +993,7 @@ enum fw_memtype_cf {
 	FW_MEMTYPE_CF_EXTMEM		= 0x2,
 	FW_MEMTYPE_CF_FLASH		= 0x4,
 	FW_MEMTYPE_CF_INTERNAL		= 0x5,
+	FW_MEMTYPE_CF_EXTMEM1           = 0x6,
 };
 
 struct fw_caps_config_cmd {
@@ -1035,6 +1036,7 @@ enum fw_params_mnem {
 	FW_PARAMS_MNEM_PFVF		= 2,	/* function params */
 	FW_PARAMS_MNEM_REG		= 3,	/* limited register access */
 	FW_PARAMS_MNEM_DMAQ		= 4,	/* dma queue params */
+	FW_PARAMS_MNEM_CHNET            = 5,    /* chnet params */
 	FW_PARAMS_MNEM_LAST
 };
 
@@ -3102,7 +3104,8 @@ enum fw_devlog_facility {
 	FW_DEVLOG_FACILITY_FCOE		= 0x2E,
 	FW_DEVLOG_FACILITY_FOISCSI	= 0x30,
 	FW_DEVLOG_FACILITY_FOFCOE	= 0x32,
-	FW_DEVLOG_FACILITY_MAX		= 0x32,
+	FW_DEVLOG_FACILITY_CHNET        = 0x34,
+	FW_DEVLOG_FACILITY_MAX          = 0x34,
 };
 
 /* log message format */
@@ -3139,4 +3142,36 @@ struct fw_devlog_cmd {
 	(((x) >> FW_DEVLOG_CMD_MEMADDR16_DEVLOG_S) & \
 	 FW_DEVLOG_CMD_MEMADDR16_DEVLOG_M)
 
+/* P C I E   F W   P F 7   R E G I S T E R */
+
+/* PF7 stores the Firmware Device Log parameters which allows Host Drivers to
+ * access the "devlog" which needing to contact firmware.  The encoding is
+ * mostly the same as that returned by the DEVLOG command except for the size
+ * which is encoded as the number of entries in multiples-1 of 128 here rather
+ * than the memory size as is done in the DEVLOG command.  Thus, 0 means 128
+ * and 15 means 2048.  This of course in turn constrains the allowed values
+ * for the devlog size ...
+ */
+#define PCIE_FW_PF_DEVLOG		7
+
+#define PCIE_FW_PF_DEVLOG_NENTRIES128_S	28
+#define PCIE_FW_PF_DEVLOG_NENTRIES128_M	0xf
+#define PCIE_FW_PF_DEVLOG_NENTRIES128_V(x) \
+	((x) << PCIE_FW_PF_DEVLOG_NENTRIES128_S)
+#define PCIE_FW_PF_DEVLOG_NENTRIES128_G(x) \
+	(((x) >> PCIE_FW_PF_DEVLOG_NENTRIES128_S) & \
+	 PCIE_FW_PF_DEVLOG_NENTRIES128_M)
+
+#define PCIE_FW_PF_DEVLOG_ADDR16_S	4
+#define PCIE_FW_PF_DEVLOG_ADDR16_M	0xffffff
+#define PCIE_FW_PF_DEVLOG_ADDR16_V(x)	((x) << PCIE_FW_PF_DEVLOG_ADDR16_S)
+#define PCIE_FW_PF_DEVLOG_ADDR16_G(x) \
+	(((x) >> PCIE_FW_PF_DEVLOG_ADDR16_S) & PCIE_FW_PF_DEVLOG_ADDR16_M)
+
+#define PCIE_FW_PF_DEVLOG_MEMTYPE_S	0
+#define PCIE_FW_PF_DEVLOG_MEMTYPE_M	0xf
+#define PCIE_FW_PF_DEVLOG_MEMTYPE_V(x)	((x) << PCIE_FW_PF_DEVLOG_MEMTYPE_S)
+#define PCIE_FW_PF_DEVLOG_MEMTYPE_G(x) \
+	(((x) >> PCIE_FW_PF_DEVLOG_MEMTYPE_S) & PCIE_FW_PF_DEVLOG_MEMTYPE_M)
+
 #endif /* _T4FW_INTERFACE_H_ */

drivers/net/ethernet/chelsio/cxgb4/t4fw_version.h

@@ -36,13 +36,13 @@
 #define __T4FW_VERSION_H__
 
 #define T4FW_VERSION_MAJOR 0x01
-#define T4FW_VERSION_MINOR 0x0C
+#define T4FW_VERSION_MINOR 0x0D
-#define T4FW_VERSION_MICRO 0x19
+#define T4FW_VERSION_MICRO 0x20
 #define T4FW_VERSION_BUILD 0x00
 
 #define T5FW_VERSION_MAJOR 0x01
-#define T5FW_VERSION_MINOR 0x0C
+#define T5FW_VERSION_MINOR 0x0D
-#define T5FW_VERSION_MICRO 0x19
+#define T5FW_VERSION_MICRO 0x20
 #define T5FW_VERSION_BUILD 0x00
 
 #endif

drivers/net/ethernet/chelsio/cxgb4vf/sge.c

@@ -1004,7 +1004,7 @@ static inline void ring_tx_db(struct adapter *adapter, struct sge_txq *tq,
 					      ? (tq->pidx - 1)
 					      : (tq->size - 1));
 			__be64 *src = (__be64 *)&tq->desc[index];
-			__be64 __iomem *dst = (__be64 *)(tq->bar2_addr +
+			__be64 __iomem *dst = (__be64 __iomem *)(tq->bar2_addr +
 							 SGE_UDB_WCDOORBELL);
 			unsigned int count = EQ_UNIT / sizeof(__be64);
 
@@ -1018,7 +1018,11 @@ static inline void ring_tx_db(struct adapter *adapter, struct sge_txq *tq,
 			 * DMA.
 			 */
 			while (count) {
-				writeq(*src, dst);
+				/* the (__force u64) is because the compiler
+				 * doesn't understand the endian swizzling
+				 * going on
+				 */
+				writeq((__force u64)*src, dst);
 				src++;
 				dst++;
 				count--;
@@ -1252,8 +1256,8 @@ int t4vf_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 	BUG_ON(DIV_ROUND_UP(ETHTXQ_MAX_HDR, TXD_PER_EQ_UNIT) > 1);
 	wr = (void *)&txq->q.desc[txq->q.pidx];
 	wr->equiq_to_len16 = cpu_to_be32(wr_mid);
-	wr->r3[0] = cpu_to_be64(0);
+	wr->r3[0] = cpu_to_be32(0);
-	wr->r3[1] = cpu_to_be64(0);
+	wr->r3[1] = cpu_to_be32(0);
 	skb_copy_from_linear_data(skb, (void *)wr->ethmacdst, fw_hdr_copy_len);
 	end = (u64 *)wr + flits;
 

drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c

@@ -210,10 +210,10 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size,
 
 			if (rpl) {
 				/* request bit in high-order BE word */
-				WARN_ON((be32_to_cpu(*(const u32 *)cmd)
+				WARN_ON((be32_to_cpu(*(const __be32 *)cmd)
 					 & FW_CMD_REQUEST_F) == 0);
 				get_mbox_rpl(adapter, rpl, size, mbox_data);
-				WARN_ON((be32_to_cpu(*(u32 *)rpl)
+				WARN_ON((be32_to_cpu(*(__be32 *)rpl)
 					 & FW_CMD_REQUEST_F) != 0);
 			}
 			t4_write_reg(adapter, mbox_ctl,
@@ -484,7 +484,7 @@ int t4_bar2_sge_qregs(struct adapter *adapter,
 	 *  o The BAR2 Queue ID.
 	 *  o The BAR2 Queue ID Offset into the BAR2 page.
 	 */
-	bar2_page_offset = ((qid >> qpp_shift) << page_shift);
+	bar2_page_offset = ((u64)(qid >> qpp_shift) << page_shift);
 	bar2_qid = qid & qpp_mask;
 	bar2_qid_offset = bar2_qid * SGE_UDB_SIZE;
 

drivers/net/ethernet/freescale/fec_main.c

@@ -1954,6 +1954,7 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 	struct fec_enet_private *fep = netdev_priv(ndev);
 	struct device_node *node;
 	int err = -ENXIO, i;
+	u32 mii_speed, holdtime;
 
 	/*
 	 * The i.MX28 dual fec interfaces are not equal.
@@ -1991,10 +1992,33 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 	 * Reference Manual has an error on this, and gets fixed on i.MX6Q
 	 * document.
 	 */
-	fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk_ipg), 5000000);
+	mii_speed = DIV_ROUND_UP(clk_get_rate(fep->clk_ipg), 5000000);
 	if (fep->quirks & FEC_QUIRK_ENET_MAC)
-		fep->phy_speed--;
+		mii_speed--;
-	fep->phy_speed <<= 1;
+	if (mii_speed > 63) {
+		dev_err(&pdev->dev,
+			"fec clock (%lu) to fast to get right mii speed\n",
+			clk_get_rate(fep->clk_ipg));
+		err = -EINVAL;
+		goto err_out;
+	}
+
+	/*
+	 * The i.MX28 and i.MX6 types have another filed in the MSCR (aka
+	 * MII_SPEED) register that defines the MDIO output hold time. Earlier
+	 * versions are RAZ there, so just ignore the difference and write the
+	 * register always.
+	 * The minimal hold time according to IEE802.3 (clause 22) is 10 ns.
+	 * HOLDTIME + 1 is the number of clk cycles the fec is holding the
+	 * output.
+	 * The HOLDTIME bitfield takes values between 0 and 7 (inclusive).
+	 * Given that ceil(clkrate / 5000000) <= 64, the calculation for
+	 * holdtime cannot result in a value greater than 3.
+	 */
+	holdtime = DIV_ROUND_UP(clk_get_rate(fep->clk_ipg), 100000000) - 1;
+
+	fep->phy_speed = mii_speed << 1 | holdtime << 8;
+
 	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 
 	fep->mii_bus = mdiobus_alloc();

drivers/net/ethernet/freescale/ucc_geth.c

@@ -3893,6 +3893,9 @@ static int ucc_geth_probe(struct platform_device* ofdev)
 	ugeth->phy_interface = phy_interface;
 	ugeth->max_speed = max_speed;
 
+	/* Carrier starts down, phylib will bring it up */
+	netif_carrier_off(dev);
+
 	err = register_netdev(dev);
 	if (err) {
 		if (netif_msg_probe(ugeth))

drivers/net/ethernet/marvell/mvneta.c

@@ -2658,16 +2658,11 @@ static int mvneta_stop(struct net_device *dev)
 static int mvneta_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	struct mvneta_port *pp = netdev_priv(dev);
-	int ret;
 
 	if (!pp->phy_dev)
 		return -ENOTSUPP;
 
-	ret = phy_mii_ioctl(pp->phy_dev, ifr, cmd);
+	return phy_mii_ioctl(pp->phy_dev, ifr, cmd);
-	if (!ret)
-		mvneta_adjust_link(dev);
-
-	return ret;
 }
 
 /* Ethtool methods */

drivers/net/ethernet/mellanox/mlx4/cmd.c

@@ -724,7 +724,8 @@ static int mlx4_cmd_wait(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
 		 * on the host, we deprecate the error message for this
 		 * specific command/input_mod/opcode_mod/fw-status to be debug.
 		 */
-		if (op == MLX4_CMD_SET_PORT && in_modifier == 1 &&
+		if (op == MLX4_CMD_SET_PORT &&
+		    (in_modifier == 1 || in_modifier == 2) &&
 		    op_modifier == 0 && context->fw_status == CMD_STAT_BAD_SIZE)
 			mlx4_dbg(dev, "command 0x%x failed: fw status = 0x%x\n",
 				 op, context->fw_status);
@@ -1993,7 +1994,6 @@ static void mlx4_master_do_cmd(struct mlx4_dev *dev, int slave, u8 cmd,
 			goto reset_slave;
 		slave_state[slave].vhcr_dma = ((u64) param) << 48;
 		priv->mfunc.master.slave_state[slave].cookie = 0;
-		mutex_init(&priv->mfunc.master.gen_eqe_mutex[slave]);
 		break;
 	case MLX4_COMM_CMD_VHCR1:
 		if (slave_state[slave].last_cmd != MLX4_COMM_CMD_VHCR0)
@@ -2225,6 +2225,7 @@ int mlx4_multi_func_init(struct mlx4_dev *dev)
 		for (i = 0; i < dev->num_slaves; ++i) {
 			s_state = &priv->mfunc.master.slave_state[i];
 			s_state->last_cmd = MLX4_COMM_CMD_RESET;
+			mutex_init(&priv->mfunc.master.gen_eqe_mutex[i]);
 			for (j = 0; j < MLX4_EVENT_TYPES_NUM; ++j)
 				s_state->event_eq[j].eqn = -1;
 			__raw_writel((__force u32) 0,

drivers/net/ethernet/mellanox/mlx4/en_netdev.c

@@ -2805,13 +2805,6 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	netif_carrier_off(dev);
 	mlx4_en_set_default_moderation(priv);
 
-	err = register_netdev(dev);
-	if (err) {
-		en_err(priv, "Netdev registration failed for port %d\n", port);
-		goto out;
-	}
-	priv->registered = 1;
-
 	en_warn(priv, "Using %d TX rings\n", prof->tx_ring_num);
 	en_warn(priv, "Using %d RX rings\n", prof->rx_ring_num);
 
@@ -2853,6 +2846,14 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 
 	mlx4_set_stats_bitmap(mdev->dev, &priv->stats_bitmap);
 
+	err = register_netdev(dev);
+	if (err) {
+		en_err(priv, "Netdev registration failed for port %d\n", port);
+		goto out;
+	}
+
+	priv->registered = 1;
+
 	return 0;
 
 out:

drivers/net/ethernet/mellanox/mlx4/eq.c

@@ -153,12 +153,10 @@ void mlx4_gen_slave_eqe(struct work_struct *work)
 
 		/* All active slaves need to receive the event */
 		if (slave == ALL_SLAVES) {
-			for (i = 0; i < dev->num_slaves; i++) {
+			for (i = 0; i <= dev->persist->num_vfs; i++) {
-				if (i != dev->caps.function &&
+				if (mlx4_GEN_EQE(dev, i, eqe))
-				    master->slave_state[i].active)
+					mlx4_warn(dev, "Failed to generate event for slave %d\n",
-					if (mlx4_GEN_EQE(dev, i, eqe))
+						  i);
-						mlx4_warn(dev, "Failed to generate event for slave %d\n",
-							  i);
 			}
 		} else {
 			if (mlx4_GEN_EQE(dev, slave, eqe))
@@ -203,13 +201,11 @@ static void mlx4_slave_event(struct mlx4_dev *dev, int slave,
 			     struct mlx4_eqe *eqe)
 {
 	struct mlx4_priv *priv = mlx4_priv(dev);
-	struct mlx4_slave_state *s_slave =
-		&priv->mfunc.master.slave_state[slave];
 
-	if (!s_slave->active) {
+	if (slave < 0 || slave > dev->persist->num_vfs ||
-		/*mlx4_warn(dev, "Trying to pass event to inactive slave\n");*/
+	    slave == dev->caps.function ||
+	    !priv->mfunc.master.slave_state[slave].active)
 		return;
-	}
 
 	slave_event(dev, slave, eqe);
 }

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

@@ -3095,6 +3095,12 @@ int mlx4_GEN_EQE(struct mlx4_dev *dev, int slave, struct mlx4_eqe *eqe)
 	if (!priv->mfunc.master.slave_state)
 		return -EINVAL;
 
+	/* check for slave valid, slave not PF, and slave active */
+	if (slave < 0 || slave > dev->persist->num_vfs ||
+	    slave == dev->caps.function ||
+	    !priv->mfunc.master.slave_state[slave].active)
+		return 0;
+
 	event_eq = &priv->mfunc.master.slave_state[slave].event_eq[eqe->type];
 
 	/* Create the event only if the slave is registered */

drivers/net/ethernet/rocker/rocker.c

@@ -4468,10 +4468,16 @@ static int rocker_port_master_changed(struct net_device *dev)
 	struct net_device *master = netdev_master_upper_dev_get(dev);
 	int err = 0;
 
+	/* There are currently three cases handled here:
+	 * 1. Joining a bridge
+	 * 2. Leaving a previously joined bridge
+	 * 3. Other, e.g. being added to or removed from a bond or openvswitch,
+	 *    in which case nothing is done
+	 */
 	if (master && master->rtnl_link_ops &&
 	    !strcmp(master->rtnl_link_ops->kind, "bridge"))
 		err = rocker_port_bridge_join(rocker_port, master);
-	else
+	else if (rocker_port_is_bridged(rocker_port))
 		err = rocker_port_bridge_leave(rocker_port);
 
 	return err;

drivers/net/ipvlan/ipvlan.h

@@ -114,7 +114,9 @@ unsigned int ipvlan_mac_hash(const unsigned char *addr);
 rx_handler_result_t ipvlan_handle_frame(struct sk_buff **pskb);
 int ipvlan_queue_xmit(struct sk_buff *skb, struct net_device *dev);
 void ipvlan_ht_addr_add(struct ipvl_dev *ipvlan, struct ipvl_addr *addr);
-bool ipvlan_addr_busy(struct ipvl_dev *ipvlan, void *iaddr, bool is_v6);
+struct ipvl_addr *ipvlan_find_addr(const struct ipvl_dev *ipvlan,
+				   const void *iaddr, bool is_v6);
+bool ipvlan_addr_busy(struct ipvl_port *port, void *iaddr, bool is_v6);
 struct ipvl_addr *ipvlan_ht_addr_lookup(const struct ipvl_port *port,
 					const void *iaddr, bool is_v6);
 void ipvlan_ht_addr_del(struct ipvl_addr *addr, bool sync);

drivers/net/ipvlan/ipvlan_core.c

@@ -81,19 +81,20 @@ void ipvlan_ht_addr_add(struct ipvl_dev *ipvlan, struct ipvl_addr *addr)
 	hash = (addr->atype == IPVL_IPV6) ?
 	       ipvlan_get_v6_hash(&addr->ip6addr) :
 	       ipvlan_get_v4_hash(&addr->ip4addr);
-	hlist_add_head_rcu(&addr->hlnode, &port->hlhead[hash]);
+	if (hlist_unhashed(&addr->hlnode))
+		hlist_add_head_rcu(&addr->hlnode, &port->hlhead[hash]);
 }
 
 void ipvlan_ht_addr_del(struct ipvl_addr *addr, bool sync)
 {
-	hlist_del_rcu(&addr->hlnode);
+	hlist_del_init_rcu(&addr->hlnode);
 	if (sync)
 		synchronize_rcu();
 }
 
-bool ipvlan_addr_busy(struct ipvl_dev *ipvlan, void *iaddr, bool is_v6)
+struct ipvl_addr *ipvlan_find_addr(const struct ipvl_dev *ipvlan,
+				   const void *iaddr, bool is_v6)
 {
-	struct ipvl_port *port = ipvlan->port;
 	struct ipvl_addr *addr;
 
 	list_for_each_entry(addr, &ipvlan->addrs, anode) {
@@ -101,12 +102,21 @@ bool ipvlan_addr_busy(struct ipvl_dev *ipvlan, void *iaddr, bool is_v6)
 		    ipv6_addr_equal(&addr->ip6addr, iaddr)) ||
 		    (!is_v6 && addr->atype == IPVL_IPV4 &&
 		    addr->ip4addr.s_addr == ((struct in_addr *)iaddr)->s_addr))
+			return addr;
+	}
+	return NULL;
+}
+
+bool ipvlan_addr_busy(struct ipvl_port *port, void *iaddr, bool is_v6)
+{
+	struct ipvl_dev *ipvlan;
+
+	ASSERT_RTNL();
+
+	list_for_each_entry(ipvlan, &port->ipvlans, pnode) {
+		if (ipvlan_find_addr(ipvlan, iaddr, is_v6))
 			return true;
 	}
-
-	if (ipvlan_ht_addr_lookup(port, iaddr, is_v6))
-		return true;
-
 	return false;
 }
 
@@ -192,7 +202,8 @@ static void ipvlan_multicast_frame(struct ipvl_port *port, struct sk_buff *skb,
 	if (skb->protocol == htons(ETH_P_PAUSE))
 		return;
 
-	list_for_each_entry(ipvlan, &port->ipvlans, pnode) {
+	rcu_read_lock();
+	list_for_each_entry_rcu(ipvlan, &port->ipvlans, pnode) {
 		if (local && (ipvlan == in_dev))
 			continue;
 
@@ -219,6 +230,7 @@ static void ipvlan_multicast_frame(struct ipvl_port *port, struct sk_buff *skb,
 mcast_acct:
 		ipvlan_count_rx(ipvlan, len, ret == NET_RX_SUCCESS, true);
 	}
+	rcu_read_unlock();
 
 	/* Locally generated? ...Forward a copy to the main-device as
 	 * well. On the RX side we'll ignore it (wont give it to any

drivers/net/ipvlan/ipvlan_main.c

@@ -505,7 +505,7 @@ static void ipvlan_link_delete(struct net_device *dev, struct list_head *head)
 	if (ipvlan->ipv6cnt > 0 || ipvlan->ipv4cnt > 0) {
 		list_for_each_entry_safe(addr, next, &ipvlan->addrs, anode) {
 			ipvlan_ht_addr_del(addr, !dev->dismantle);
-			list_del_rcu(&addr->anode);
+			list_del(&addr->anode);
 		}
 	}
 	list_del_rcu(&ipvlan->pnode);
@@ -607,7 +607,7 @@ static int ipvlan_add_addr6(struct ipvl_dev *ipvlan, struct in6_addr *ip6_addr)
 {
 	struct ipvl_addr *addr;
 
-	if (ipvlan_addr_busy(ipvlan, ip6_addr, true)) {
+	if (ipvlan_addr_busy(ipvlan->port, ip6_addr, true)) {
 		netif_err(ipvlan, ifup, ipvlan->dev,
 			  "Failed to add IPv6=%pI6c addr for %s intf\n",
 			  ip6_addr, ipvlan->dev->name);
@@ -620,9 +620,13 @@ static int ipvlan_add_addr6(struct ipvl_dev *ipvlan, struct in6_addr *ip6_addr)
 	addr->master = ipvlan;
 	memcpy(&addr->ip6addr, ip6_addr, sizeof(struct in6_addr));
 	addr->atype = IPVL_IPV6;
-	list_add_tail_rcu(&addr->anode, &ipvlan->addrs);
+	list_add_tail(&addr->anode, &ipvlan->addrs);
 	ipvlan->ipv6cnt++;
-	ipvlan_ht_addr_add(ipvlan, addr);
+	/* If the interface is not up, the address will be added to the hash
+	 * list by ipvlan_open.
+	 */
+	if (netif_running(ipvlan->dev))
+		ipvlan_ht_addr_add(ipvlan, addr);
 
 	return 0;
 }
@@ -631,12 +635,12 @@ static void ipvlan_del_addr6(struct ipvl_dev *ipvlan, struct in6_addr *ip6_addr)
 {
 	struct ipvl_addr *addr;
 
-	addr = ipvlan_ht_addr_lookup(ipvlan->port, ip6_addr, true);
+	addr = ipvlan_find_addr(ipvlan, ip6_addr, true);
 	if (!addr)
 		return;
 
 	ipvlan_ht_addr_del(addr, true);
-	list_del_rcu(&addr->anode);
+	list_del(&addr->anode);
 	ipvlan->ipv6cnt--;
 	WARN_ON(ipvlan->ipv6cnt < 0);
 	kfree_rcu(addr, rcu);
@@ -675,7 +679,7 @@ static int ipvlan_add_addr4(struct ipvl_dev *ipvlan, struct in_addr *ip4_addr)
 {
 	struct ipvl_addr *addr;
 
-	if (ipvlan_addr_busy(ipvlan, ip4_addr, false)) {
+	if (ipvlan_addr_busy(ipvlan->port, ip4_addr, false)) {
 		netif_err(ipvlan, ifup, ipvlan->dev,
 			  "Failed to add IPv4=%pI4 on %s intf.\n",
 			  ip4_addr, ipvlan->dev->name);
@@ -688,9 +692,13 @@ static int ipvlan_add_addr4(struct ipvl_dev *ipvlan, struct in_addr *ip4_addr)
 	addr->master = ipvlan;
 	memcpy(&addr->ip4addr, ip4_addr, sizeof(struct in_addr));
 	addr->atype = IPVL_IPV4;
-	list_add_tail_rcu(&addr->anode, &ipvlan->addrs);
+	list_add_tail(&addr->anode, &ipvlan->addrs);
 	ipvlan->ipv4cnt++;
-	ipvlan_ht_addr_add(ipvlan, addr);
+	/* If the interface is not up, the address will be added to the hash
+	 * list by ipvlan_open.
+	 */
+	if (netif_running(ipvlan->dev))
+		ipvlan_ht_addr_add(ipvlan, addr);
 	ipvlan_set_broadcast_mac_filter(ipvlan, true);
 
 	return 0;
@@ -700,12 +708,12 @@ static void ipvlan_del_addr4(struct ipvl_dev *ipvlan, struct in_addr *ip4_addr)
 {
 	struct ipvl_addr *addr;
 
-	addr = ipvlan_ht_addr_lookup(ipvlan->port, ip4_addr, false);
+	addr = ipvlan_find_addr(ipvlan, ip4_addr, false);
 	if (!addr)
 		return;
 
 	ipvlan_ht_addr_del(addr, true);
-	list_del_rcu(&addr->anode);
+	list_del(&addr->anode);
 	ipvlan->ipv4cnt--;
 	WARN_ON(ipvlan->ipv4cnt < 0);
 	if (!ipvlan->ipv4cnt)

drivers/net/usb/asix_common.c

@@ -188,6 +188,8 @@ struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 		memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
 		skb_put(skb, sizeof(padbytes));
 	}
+
+	usbnet_set_skb_tx_stats(skb, 1, 0);
 	return skb;
 }
 

drivers/net/usb/cdc_ether.c

@@ -522,6 +522,7 @@ static const struct driver_info wwan_info = {
 #define DELL_VENDOR_ID		0x413C
 #define REALTEK_VENDOR_ID	0x0bda
 #define SAMSUNG_VENDOR_ID	0x04e8
+#define LENOVO_VENDOR_ID	0x17ef
 
 static const struct usb_device_id	products[] = {
 /* BLACKLIST !!
@@ -702,6 +703,13 @@ static const struct usb_device_id	products[] = {
 	.driver_info = 0,
 },
 
+/* Lenovo Thinkpad USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7205, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
 /* WHITELIST!!!
  *
  * CDC Ether uses two interfaces, not necessarily consecutive.

drivers/net/usb/cdc_ncm.c

@@ -1172,17 +1172,17 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign)
 
 	/* return skb */
 	ctx->tx_curr_skb = NULL;
-	dev->net->stats.tx_packets += ctx->tx_curr_frame_num;
 
 	/* keep private stats: framing overhead and number of NTBs */
 	ctx->tx_overhead += skb_out->len - ctx->tx_curr_frame_payload;
 	ctx->tx_ntbs++;
 
-	/* usbnet has already counted all the framing overhead.
+	/* usbnet will count all the framing overhead by default.
 	 * Adjust the stats so that the tx_bytes counter show real
 	 * payload data instead.
 	 */
-	dev->net->stats.tx_bytes -= skb_out->len - ctx->tx_curr_frame_payload;
+	usbnet_set_skb_tx_stats(skb_out, n,
+				ctx->tx_curr_frame_payload - skb_out->len);
 
 	return skb_out;
 

drivers/net/usb/r8152.c

@@ -492,6 +492,7 @@ enum rtl8152_flags {
 /* Define these values to match your device */
 #define VENDOR_ID_REALTEK		0x0bda
 #define VENDOR_ID_SAMSUNG		0x04e8
+#define VENDOR_ID_LENOVO		0x17ef
 
 #define MCU_TYPE_PLA			0x0100
 #define MCU_TYPE_USB			0x0000
@@ -4037,6 +4038,7 @@ static struct usb_device_id rtl8152_table[] = {
 	{REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8152)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101)},
+	{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO,  0x7205)},
 	{}
 };
 

drivers/net/usb/sr9800.c

@@ -144,6 +144,7 @@ static struct sk_buff *sr_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 		skb_put(skb, sizeof(padbytes));
 	}
 
+	usbnet_set_skb_tx_stats(skb, 1, 0);
 	return skb;
 }
 

drivers/net/usb/usbnet.c

@@ -1188,8 +1188,7 @@ static void tx_complete (struct urb *urb)
 	struct usbnet		*dev = entry->dev;
 
 	if (urb->status == 0) {
-		if (!(dev->driver_info->flags & FLAG_MULTI_PACKET))
+		dev->net->stats.tx_packets += entry->packets;
-			dev->net->stats.tx_packets++;
 		dev->net->stats.tx_bytes += entry->length;
 	} else {
 		dev->net->stats.tx_errors++;
@@ -1347,7 +1346,19 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
 		} else
 			urb->transfer_flags |= URB_ZERO_PACKET;
 	}
-	entry->length = urb->transfer_buffer_length = length;
+	urb->transfer_buffer_length = length;
+
+	if (info->flags & FLAG_MULTI_PACKET) {
+		/* Driver has set number of packets and a length delta.
+		 * Calculate the complete length and ensure that it's
+		 * positive.
+		 */
+		entry->length += length;
+		if (WARN_ON_ONCE(entry->length <= 0))
+			entry->length = length;
+	} else {
+		usbnet_set_skb_tx_stats(skb, 1, length);
+	}
 
 	spin_lock_irqsave(&dev->txq.lock, flags);
 	retval = usb_autopm_get_interface_async(dev->intf);

drivers/net/wireless/ath/ath9k/beacon.c

@@ -219,12 +219,15 @@ void ath9k_beacon_remove_slot(struct ath_softc *sc, struct ieee80211_vif *vif)
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_vif *avp = (void *)vif->drv_priv;
 	struct ath_buf *bf = avp->av_bcbuf;
+	struct ath_beacon_config *cur_conf = &sc->cur_chan->beacon;
 
 	ath_dbg(common, CONFIG, "Removing interface at beacon slot: %d\n",
 		avp->av_bslot);
 
 	tasklet_disable(&sc->bcon_tasklet);
 
+	cur_conf->enable_beacon &= ~BIT(avp->av_bslot);
+
 	if (bf && bf->bf_mpdu) {
 		struct sk_buff *skb = bf->bf_mpdu;
 		dma_unmap_single(sc->dev, bf->bf_buf_addr,
@@ -521,8 +524,7 @@ static bool ath9k_allow_beacon_config(struct ath_softc *sc,
 	}
 
 	if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) {
-		if ((vif->type != NL80211_IFTYPE_AP) ||
+		if (vif->type != NL80211_IFTYPE_AP) {
-		    (sc->nbcnvifs > 1)) {
 			ath_dbg(common, CONFIG,
 				"An AP interface is already present !\n");
 			return false;
@@ -616,12 +618,14 @@ void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif,
 	 * enabling/disabling SWBA.
 	 */
 	if (changed & BSS_CHANGED_BEACON_ENABLED) {
-		if (!bss_conf->enable_beacon &&
+		bool enabled = cur_conf->enable_beacon;
-		    (sc->nbcnvifs <= 1)) {
+
-			cur_conf->enable_beacon = false;
+		if (!bss_conf->enable_beacon) {
-		} else if (bss_conf->enable_beacon) {
+			cur_conf->enable_beacon &= ~BIT(avp->av_bslot);
-			cur_conf->enable_beacon = true;
+		} else {
-			ath9k_cache_beacon_config(sc, ctx, bss_conf);
+			cur_conf->enable_beacon |= BIT(avp->av_bslot);
+			if (!enabled)
+				ath9k_cache_beacon_config(sc, ctx, bss_conf);
 		}
 	}
 

drivers/net/wireless/ath/ath9k/common.h

@@ -54,7 +54,7 @@ struct ath_beacon_config {
 	u16 dtim_period;
 	u16 bmiss_timeout;
 	u8 dtim_count;
-	bool enable_beacon;
+	u8 enable_beacon;
 	bool ibss_creator;
 	u32 nexttbtt;
 	u32 intval;

drivers/net/wireless/ath/ath9k/hw.c

@@ -424,7 +424,7 @@ static void ath9k_hw_init_defaults(struct ath_hw *ah)
 	ah->power_mode = ATH9K_PM_UNDEFINED;
 	ah->htc_reset_init = true;
 
-	ah->tpc_enabled = true;
+	ah->tpc_enabled = false;
 
 	ah->ani_function = ATH9K_ANI_ALL;
 	if (!AR_SREV_9300_20_OR_LATER(ah))

drivers/net/wireless/brcm80211/brcmfmac/feature.c

@@ -126,7 +126,8 @@ void brcmf_feat_attach(struct brcmf_pub *drvr)
 	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan");
 	if (drvr->bus_if->wowl_supported)
 		brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
-	brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);
+	if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID)
+		brcmf_feat_iovar_int_set(ifp, BRCMF_FEAT_MBSS, "mbss", 0);
 
 	/* set chip related quirks */
 	switch (drvr->bus_if->chip) {

drivers/net/wireless/iwlwifi/dvm/dev.h

@@ -708,7 +708,6 @@ struct iwl_priv {
 	unsigned long reload_jiffies;
 	int reload_count;
 	bool ucode_loaded;
-	bool init_ucode_run;		/* Don't run init uCode again */
 
 	u8 plcp_delta_threshold;
 

drivers/net/wireless/iwlwifi/dvm/mac80211.c

@@ -1114,16 +1114,17 @@ static void iwlagn_mac_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	scd_queues &= ~(BIT(IWL_IPAN_CMD_QUEUE_NUM) |
 			BIT(IWL_DEFAULT_CMD_QUEUE_NUM));
 
-	if (vif)
+	if (drop) {
-		scd_queues &= ~BIT(vif->hw_queue[IEEE80211_AC_VO]);
+		IWL_DEBUG_TX_QUEUES(priv, "Flushing SCD queues: 0x%x\n",
-
+				    scd_queues);
-	IWL_DEBUG_TX_QUEUES(priv, "Flushing SCD queues: 0x%x\n", scd_queues);
+		if (iwlagn_txfifo_flush(priv, scd_queues)) {
-	if (iwlagn_txfifo_flush(priv, scd_queues)) {
+			IWL_ERR(priv, "flush request fail\n");
-		IWL_ERR(priv, "flush request fail\n");
+			goto done;
-		goto done;
+		}
 	}
+
 	IWL_DEBUG_TX_QUEUES(priv, "wait transmit/flush all frames\n");
-	iwl_trans_wait_tx_queue_empty(priv->trans, 0xffffffff);
+	iwl_trans_wait_tx_queue_empty(priv->trans, scd_queues);
 done:
 	mutex_unlock(&priv->mutex);
 	IWL_DEBUG_MAC80211(priv, "leave\n");

drivers/net/wireless/iwlwifi/dvm/ucode.c

@@ -418,9 +418,6 @@ int iwl_run_init_ucode(struct iwl_priv *priv)
 	if (!priv->fw->img[IWL_UCODE_INIT].sec[0].len)
 		return 0;
 
-	if (priv->init_ucode_run)
-		return 0;
-
 	iwl_init_notification_wait(&priv->notif_wait, &calib_wait,
 				   calib_complete, ARRAY_SIZE(calib_complete),
 				   iwlagn_wait_calib, priv);
@@ -440,8 +437,6 @@ int iwl_run_init_ucode(struct iwl_priv *priv)
 	 */
 	ret = iwl_wait_notification(&priv->notif_wait, &calib_wait,
 					UCODE_CALIB_TIMEOUT);
-	if (!ret)
-		priv->init_ucode_run = true;
 
 	goto out;
 

drivers/net/wireless/iwlwifi/iwl-drv.c

@@ -1257,6 +1257,7 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
 				op->name, err);
 #endif
 	}
+	kfree(pieces);
 	return;
 
  try_again:

drivers/net/wireless/iwlwifi/mvm/rs.c

@@ -1278,6 +1278,9 @@ static void rs_mac80211_tx_status(void *mvm_r,
 	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
+	if (!iwl_mvm_sta_from_mac80211(sta)->vif)
+		return;
+
 	if (!ieee80211_is_data(hdr->frame_control) ||
 	    info->flags & IEEE80211_TX_CTL_NO_ACK)
 		return;
@@ -2511,6 +2514,14 @@ static void rs_get_rate(void *mvm_r, struct ieee80211_sta *sta, void *mvm_sta,
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct iwl_lq_sta *lq_sta = mvm_sta;
 
+	if (sta && !iwl_mvm_sta_from_mac80211(sta)->vif) {
+		/* if vif isn't initialized mvm doesn't know about
+		 * this station, so don't do anything with the it
+		 */
+		sta = NULL;
+		mvm_sta = NULL;
+	}
+
 	/* TODO: handle rate_idx_mask and rate_idx_mcs_mask */
 
 	/* Treat uninitialized rate scaling data same as non-existing. */
@@ -2827,6 +2838,9 @@ static void rs_rate_update(void *mvm_r,
 			(struct iwl_op_mode *)mvm_r;
 	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
 
+	if (!iwl_mvm_sta_from_mac80211(sta)->vif)
+		return;
+
 	/* Stop any ongoing aggregations as rs starts off assuming no agg */
 	for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++)
 		ieee80211_stop_tx_ba_session(sta, tid);
@@ -3587,9 +3601,15 @@ static ssize_t iwl_dbgfs_ss_force_write(struct iwl_lq_sta *lq_sta, char *buf,
 
 MVM_DEBUGFS_READ_WRITE_FILE_OPS(ss_force, 32);
 
-static void rs_add_debugfs(void *mvm, void *mvm_sta, struct dentry *dir)
+static void rs_add_debugfs(void *mvm, void *priv_sta, struct dentry *dir)
 {
-	struct iwl_lq_sta *lq_sta = mvm_sta;
+	struct iwl_lq_sta *lq_sta = priv_sta;
+	struct iwl_mvm_sta *mvmsta;
+
+	mvmsta = container_of(lq_sta, struct iwl_mvm_sta, lq_sta);
+
+	if (!mvmsta->vif)
+		return;
 
 	debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir,
 			    lq_sta, &rs_sta_dbgfs_scale_table_ops);