redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ARM: SoC driver updates for v5.4 

The branch contains driver changes that are tightly
 connected to SoC specific code. Aside from smaller
 cleanups and bug fixes, here is a list of the notable
 changes.
 
 New device drivers:
 
 - The Turris Mox router has a new "moxtet" bus driver
   for its on-board pluggable extension bus. The
   same platform also gains a firmware driver.
 
 - The Samsung Exynos family gains a new Chipid driver
   exporting using the soc device sysfs interface
 
 - A similar socinfo driver for Qualcomm Snapdragon
   chips.
 
 - A firmware driver for the NXP i.MX DSP IPC protocol
   using shared memory and a mailbox
 
 Other changes:
 
 - The i.MX reset controller driver now supports the
   NXP i.MX8MM chip
 
 - Amlogic SoC specific drivers gain support for
   the S905X3 and A311D chips
 
 - A rework of the TI Davinci framebuffer driver to
   allow important cleanups in the platform code
 
 - A couple of device drivers for removed ARM SoC
   platforms are removed. Most of the removals were
   picked up by other maintainers, this contains
   whatever was left.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6SUAAoJEJpsee/mABjZAfwP/01bXBOlGVusNH2zuh8IUSHb
 //5sTdWpwa2ugRekLOJUOjo2p9Fu70yH6xr4RUHI0rcRjZA0xR3bZPx45gI8LRHQ
 tfb25LaKqfgZjWMCJ8due1Lh7B6ffOQukryMtM/LoiCtqsy7b6aThEKaLpM9/Owl
 t53o4wKaVQJK5He9JQom9NOZidkl7tYLHmDQTOXhX2UEA/i45vtfjdsEBvoFPbTx
 +bYvlqs+SWlpDJk29j+oBOeKadPF+TFboLDiUCxH44MC3OsH51zjtKVBRTtbNMkb
 ek/ci5x9hCeHcYSEigNq2EMzEln09Yxyvjk8U/jLiJ1h1kz3p5MjqJbVMF1rYXpe
 ALuAwinM8Zv2o5/UOCkiQTWq79PtpOKHZKpNBXkaJ8kyqBLMSy8Fs3hCvXrDnjnQ
 TC8jX7UBqHRV2rbQIYehAQAxTvcRgTbqusQGLkUJInlux6go57LoMYHPABpHftJV
 kRdVeT0KzdCz1pvQwyekIog5hPLNTBi4jw6eQcOgeENvAea1MJa8lMMfKcVbIdS0
 ZVvxLl+K6noEKAv5lSeHAzjXq+cQFr3zDCsWy351mJETDHmE8zjsaHN1SgbRYLEk
 ZqzNwUYaPYBis38g85qaY/TSsJrWJ+jP8u7s9HTw3Oywg8SRy5vtW177s00/9VOd
 PYZ2UpqUeX8cdvggqUUU
 =lxFi
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "This contains driver changes that are tightly connected to SoC
  specific code. Aside from smaller cleanups and bug fixes, here is a
  list of the notable changes.

  New device drivers:

   - The Turris Mox router has a new "moxtet" bus driver for its
     on-board pluggable extension bus. The same platform also gains a
     firmware driver.

   - The Samsung Exynos family gains a new Chipid driver exporting using
     the soc device sysfs interface

   - A similar socinfo driver for Qualcomm Snapdragon chips.

   - A firmware driver for the NXP i.MX DSP IPC protocol using shared
     memory and a mailbox

  Other changes:

   - The i.MX reset controller driver now supports the NXP i.MX8MM chip

   - Amlogic SoC specific drivers gain support for the S905X3 and A311D
     chips

   - A rework of the TI Davinci framebuffer driver to allow important
     cleanups in the platform code

   - A couple of device drivers for removed ARM SoC platforms are
     removed. Most of the removals were picked up by other maintainers,
     this contains whatever was left"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  bus: uniphier-system-bus: use devm_platform_ioremap_resource()
  soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
  dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
  firmware: ti_sci: Allow for device shared and exclusive requests
  bus: imx-weim: remove incorrect __init annotations
  fbdev: remove w90x900/nuc900 platform drivers
  spi: remove w90x900 driver
  net: remove w90p910-ether driver
  net: remove ks8695 driver
  firmware: turris-mox-rwtm: Add sysfs documentation
  firmware: Add Turris Mox rWTM firmware driver
  dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
  bus: moxtet: fix unsigned comparison to less than zero
  bus: moxtet: remove set but not used variable 'dummy'
  ARM: scoop: Use the right include
  dt-bindings: power: add Amlogic Everything-Else power domains bindings
  soc: amlogic: Add support for Everything-Else power domains controller
  fbdev: da8xx: use resource management for dma
  fbdev: da8xx-fb: drop a redundant if
  fbdev: da8xx-fb: use devm_platform_ioremap_resource()
  ...
alistair/sunxi64-5.4-dsi
Linus Torvalds 2019-09-16 15:52:38 -07:00
parent 2b97c39514 3dc8dcb02f
commit 399eb9b6cb
128 changed files with 5518 additions and 5063 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
Documentation/ABI/testing/debugfs-moxtet 100644
View File

@ -0,0 +1,23 @@
What: /sys/kernel/debug/moxtet/input
Date: March 2019
KernelVersion: 5.3
Contact: Marek Behún <marek.behun@nic.cz>
Description: (R) Read input from the shift registers, in hexadecimal.
Returns N+1 bytes, where N is the number of Moxtet connected
modules. The first byte is from the CPU board itself.
Example: 101214
10: CPU board with SD card
12: 2 = PCIe module, 1 = IRQ not active
14: 4 = Peridot module, 1 = IRQ not active
What: /sys/kernel/debug/moxtet/output
Date: March 2019
KernelVersion: 5.3
Contact: Marek Behún <marek.behun@nic.cz>
Description: (RW) Read last written value to the shift registers, in
hexadecimal, or write values to the shift registers, also
in hexadecimal.
Example: 0102
01: 01 was last written, or is to be written, to the
first module's shift register
02: the same for second module

17
Documentation/ABI/testing/sysfs-bus-moxtet-devices 100644
View File

@ -0,0 +1,17 @@
What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_description
Date: March 2019
KernelVersion: 5.3
Contact: Marek Behún <marek.behun@nic.cz>
Description: (R) Moxtet module description. Format: string
What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_id
Date: March 2019
KernelVersion: 5.3
Contact: Marek Behún <marek.behun@nic.cz>
Description: (R) Moxtet module ID. Format: %x
What: /sys/bus/moxtet/devices/moxtet-<name>.<addr>/module_name
Date: March 2019
KernelVersion: 5.3
Contact: Marek Behún <marek.behun@nic.cz>
Description: (R) Moxtet module name. Format: string

7
Documentation/ABI/testing/sysfs-devices-soc
View File

@ -26,6 +26,13 @@ Description:
Read-only attribute common to all SoCs. Contains SoC family name
(e.g. DB8500).
What: /sys/devices/socX/serial_number
Date: January 2019
contact: Bjorn Andersson <bjorn.andersson@linaro.org>
Description:
Read-only attribute supported by most SoCs. Contains the SoC's
serial number, if available.
What: /sys/devices/socX/soc_id
Date: January 2012
contact: Lee Jones <lee.jones@linaro.org>

37
Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm 100644
View File

@ -0,0 +1,37 @@
What: /sys/firmware/turris-mox-rwtm/board_version
Date: August 2019
KernelVersion: 5.4
Contact: Marek Behún <marek.behun@nic.cz>
Description: (R) Board version burned into eFuses of this Turris Mox board.
Format: %i
What: /sys/firmware/turris-mox-rwtm/mac_address*
Date: August 2019
KernelVersion: 5.4
Contact: Marek Behún <marek.behun@nic.cz>
Description: (R) MAC addresses burned into eFuses of this Turris Mox board.
Format: %pM
What: /sys/firmware/turris-mox-rwtm/pubkey
Date: August 2019
KernelVersion: 5.4
Contact: Marek Behún <marek.behun@nic.cz>
Description: (R) ECDSA public key (in pubkey hex compressed form) computed
as pair to the ECDSA private key burned into eFuses of this
Turris Mox Board.
Format: string
What: /sys/firmware/turris-mox-rwtm/ram_size
Date: August 2019
KernelVersion: 5.4
Contact: Marek Behún <marek.behun@nic.cz>
Description: (R) RAM size in MiB of this Turris Mox board as was detected
during manufacturing and burned into eFuses. Can be 512 or 1024.
Format: %i
What: /sys/firmware/turris-mox-rwtm/serial_number
Date: August 2019
KernelVersion: 5.4
Contact: Marek Behún <marek.behun@nic.cz>
Description: (R) Serial number burned into eFuses of this Turris Mox device.
Format: %016X

17
Documentation/devicetree/bindings/arm/arm,scmi.txt
View File

@ -73,6 +73,16 @@ Required properties:
as used by the firmware. Refer to platform details
for your implementation for the IDs to use.
Reset signal bindings for the reset domains based on SCMI Message Protocol
------------------------------------------------------------
This binding for the SCMI reset domain providers uses the generic reset
signal binding[5].
Required properties:
- #reset-cells : Should be 1. Contains the reset domain ID value used
by SCMI commands.
SRAM and Shared Memory for SCMI
-------------------------------
@ -93,6 +103,7 @@ Required sub-node properties:
[2] Documentation/devicetree/bindings/power/power_domain.txt
[3] Documentation/devicetree/bindings/thermal/thermal.txt
[4] Documentation/devicetree/bindings/sram/sram.txt
[5] Documentation/devicetree/bindings/reset/reset.txt
Example:
@ -152,6 +163,11 @@ firmware {
reg = <0x15>;
#thermal-sensor-cells = <1>;
};
scmi_reset: protocol@16 {
reg = <0x16>;
#reset-cells = <1>;
};
};
};
@ -166,6 +182,7 @@ hdlcd@7ff60000 {
reg = <0 0x7ff60000 0 0x1000>;
clocks = <&scmi_clk 4>;
power-domains = <&scmi_devpd 1>;
resets = <&scmi_reset 10>;
};
thermal-zones {

46
Documentation/devicetree/bindings/bus/moxtet.txt 100644
View File

@ -0,0 +1,46 @@
Turris Mox module status and configuration bus (over SPI)
Required properties:
- compatible : Should be "cznic,moxtet"
- #address-cells : Has to be 1
- #size-cells : Has to be 0
- spi-cpol : Required inverted clock polarity
- spi-cpha : Required shifted clock phase
- interrupts : Must contain reference to the shared interrupt line
- interrupt-controller : Required
- #interrupt-cells : Has to be 1
For other required and optional properties of SPI slave nodes please refer to
../spi/spi-bus.txt.
Required properties of subnodes:
- reg : Should be position on the Moxtet bus (how many Moxtet
modules are between this module and CPU module, so
either 0 or a positive integer)
The driver finds the devices connected to the bus by itself, but it may be
needed to reference some of them from other parts of the device tree. In that
case the devices can be defined as subnodes of the moxtet node.
Example:
moxtet@1 {
compatible = "cznic,moxtet";
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
spi-max-frequency = <10000000>;
spi-cpol;
spi-cpha;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gpiosb>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
moxtet_sfp: gpio@0 {
compatible = "cznic,moxtet-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0>;
}
};

19
Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt 100644
View File

@ -0,0 +1,19 @@
Turris Mox rWTM firmware driver
Required properties:
- compatible : Should be "cznic,turris-mox-rwtm"
- mboxes : Must contain a reference to associated mailbox
This device tree node should be used on Turris Mox, or potentially another A3700
compatible device running the Mox's rWTM firmware in the secure processor (for
example it is possible to flash this firmware into EspressoBin).
Example:
firmware {
turris-mox-rwtm {
compatible = "cznic,turris-mox-rwtm";
mboxes = <&rwtm 0>;
status = "okay";
};
};

4
Documentation/devicetree/bindings/firmware/qcom,scm.txt
View File

@ -9,14 +9,16 @@ Required properties:
- compatible: must contain one of the following:
* "qcom,scm-apq8064"
* "qcom,scm-apq8084"
* "qcom,scm-ipq4019"
* "qcom,scm-msm8660"
* "qcom,scm-msm8916"
* "qcom,scm-msm8960"
* "qcom,scm-msm8974"
* "qcom,scm-msm8996"
* "qcom,scm-msm8998"
* "qcom,scm-ipq4019"
* "qcom,scm-sc7180"
* "qcom,scm-sdm845"
* "qcom,scm-sm8150"
and:
* "qcom,scm"
- clocks: Specifies clocks needed by the SCM interface, if any:

18
Documentation/devicetree/bindings/gpio/gpio-moxtet.txt 100644
View File

@ -0,0 +1,18 @@
Turris Mox Moxtet GPIO expander via Moxtet bus
Required properties:
- compatible : Should be "cznic,moxtet-gpio".
- gpio-controller : Marks the device node as a GPIO controller.
- #gpio-cells : Should be two. For consumer use see gpio.txt.
Other properties are required for a Moxtet bus device, please refer to
Documentation/devicetree/bindings/bus/moxtet.txt.
Example:
moxtet_sfp: gpio@0 {
compatible = "cznic,moxtet-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0>;
}

93
Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml 100644
View File

@ -0,0 +1,93 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2019 BayLibre, SAS
%YAML 1.2
---
$id: "http://devicetree.org/schemas/power/amlogic,meson-ee-pwrc.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Amlogic Meson Everything-Else Power Domains
maintainers:
- Neil Armstrong <narmstrong@baylibre.com>
description: |+
The Everything-Else Power Domains node should be the child of a syscon
node with the required property:
- compatible: Should be the following:
"amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
Refer to the the bindings described in
Documentation/devicetree/bindings/mfd/syscon.txt
properties:
compatible:
enum:
- amlogic,meson-g12a-pwrc
- amlogic,meson-sm1-pwrc
clocks:
minItems: 2
clock-names:
items:
- const: vpu
- const: vapb
resets:
minItems: 11
reset-names:
items:
- const: viu
- const: venc
- const: vcbus
- const: bt656
- const: rdma
- const: venci
- const: vencp
- const: vdac
- const: vdi6
- const: vencl
- const: vid_lock
"#power-domain-cells":
const: 1
amlogic,ao-sysctrl:
description: phandle to the AO sysctrl node
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle
required:
- compatible
- clocks
- clock-names
- resets
- reset-names
- "#power-domain-cells"
- amlogic,ao-sysctrl
examples:
- |
pwrc: power-controller {
compatible = "amlogic,meson-sm1-pwrc";
#power-domain-cells = <1>;
amlogic,ao-sysctrl = <&rti>;
resets = <&reset_viu>,
<&reset_venc>,
<&reset_vcbus>,
<&reset_bt656>,
<&reset_rdma>,
<&reset_venci>,
<&reset_vencp>,
<&reset_vdac>,
<&reset_vdi6>,
<&reset_vencl>,
<&reset_vid_lock>;
reset-names = "viu", "venc", "vcbus", "bt656",
"rdma", "venci", "vencp", "vdac",
"vdi6", "vencl", "vid_lock";
clocks = <&clk_vpu>, <&clk_vapb>;
clock-names = "vpu", "vapb";
};

6
Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
View File

@ -8,6 +8,7 @@ Required properties:
- compatible:
- For i.MX7 SoCs should be "fsl,imx7d-src", "syscon"
- For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon"
- For i.MX8MM SoCs should be "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon"
- reg: should be register base and length as documented in the
datasheet
- interrupts: Should contain SRC interrupt
@ -46,5 +47,6 @@ Example:
For list of all valid reset indices see
<dt-bindings/reset/imx7-reset.h> for i.MX7 and
<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ
<dt-bindings/reset/imx7-reset.h> for i.MX7,
<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and
<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM

30
Documentation/devicetree/bindings/reset/snps,dw-reset.txt 100644
View File

@ -0,0 +1,30 @@
Synopsys DesignWare Reset controller
=======================================
Please also refer to reset.txt in this directory for common reset
controller binding usage.
Required properties:
- compatible: should be one of the following.
"snps,dw-high-reset" - for active high configuration
"snps,dw-low-reset" - for active low configuration
- reg: physical base address of the controller and length of memory mapped
region.
- #reset-cells: must be 1.
example:
dw_rst_1: reset-controller@0000 {
compatible = "snps,dw-high-reset";
reg = <0x0000 0x4>;
#reset-cells = <1>;
};
dw_rst_2: reset-controller@1000 {i
compatible = "snps,dw-low-reset";
reg = <0x1000 0x8>;
#reset-cells = <1>;
};

1
Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt
View File

@ -11,6 +11,7 @@ Required properties:
"amlogic,meson8b-clk-measure" for Meson8b SoCs
"amlogic,meson-axg-clk-measure" for AXG SoCs
"amlogic,meson-g12a-clk-measure" for G12a SoCs
"amlogic,meson-sm1-clk-measure" for SM1 SoCs
- reg: base address and size of the Clock Measurer register space.
Example:

13
Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt
View File

@ -18,7 +18,8 @@ Required properties:
- reg : offset and length of the device registers.
- bus-frequency : the clock frequency for QUICC Engine.
- fsl,qe-num-riscs: define how many RISC engines the QE has.
- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
- fsl,qe-snums: This property has to be specified as '/bits/ 8' value,
defining the array of serial number (SNUM) values for the virtual
threads.
Optional properties:
@ -34,6 +35,11 @@ Recommended properties
- brg-frequency : the internal clock source frequency for baud-rate
generators in Hz.
Deprecated properties
- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use
for the threads. Use fsl,qe-snums instead to not only specify the
number of snums, but also their values.
Example:
qe@e0100000 {
#address-cells = <1>;
@ -44,6 +50,11 @@ Example:
reg = <e0100000 480>;
brg-frequency = <0>;
bus-frequency = <179A7B00>;
fsl,qe-snums = /bits/ 8 <
0x04 0x05 0x0C 0x0D 0x14 0x15 0x1C 0x1D
0x24 0x25 0x2C 0x2D 0x34 0x35 0x88 0x89
0x98 0x99 0xA8 0xA9 0xB8 0xB9 0xC8 0xC9
0xD8 0xD9 0xE8 0xE9>;
}
* Multi-User RAM (MURAM)

5
Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
View File

@ -15,7 +15,10 @@ power-domains.
- compatible:
Usage: required
Value type: <string>
Definition: must be "qcom,sdm845-aoss-qmp"
Definition: must be one of:
"qcom,sc7180-aoss-qmp"
"qcom,sdm845-aoss-qmp"
"qcom,sm8150-aoss-qmp"
- reg:
Usage: required

11
Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
View File

@ -19,8 +19,15 @@ child of the pmmc node.
Required Properties:
--------------------
- compatible: should be "ti,sci-pm-domain"
- #power-domain-cells: Must be 1 so that an id can be provided in each
device node.
- #power-domain-cells: Can be one of the following:
1: Containing the device id of each node
2: First entry should be device id
Second entry should be one of the floowing:
TI_SCI_PD_EXCLUSIVE: To allow device to be
exclusively controlled by
the requesting hosts.
TI_SCI_PD_SHARED: To allow device to be shared
by multiple hosts.
Example (K2G):
-------------

17
MAINTAINERS
View File

@ -1617,6 +1617,21 @@ F: drivers/clocksource/timer-atlas7.c
N: [^a-z]sirf
X: drivers/gnss
ARM/CZ.NIC TURRIS MOX SUPPORT
M: Marek Behun <marek.behun@nic.cz>
W: http://mox.turris.cz
S: Maintained
F: Documentation/ABI/testing/debugfs-moxtet
F: Documentation/ABI/testing/sysfs-bus-moxtet-devices
F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
F: Documentation/devicetree/bindings/bus/moxtet.txt
F: Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt
F: Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
F: include/linux/moxtet.h
F: drivers/bus/moxtet.c
F: drivers/firmware/turris-mox-rwtm.c
F: drivers/gpio/gpio-moxtet.c
ARM/EBSA110 MACHINE SUPPORT
M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -15530,6 +15545,7 @@ F: drivers/clk/clk-sc[mp]i.c
F: drivers/cpufreq/sc[mp]i-cpufreq.c
F: drivers/firmware/arm_scpi.c
F: drivers/firmware/arm_scmi/
F: drivers/reset/reset-scmi.c
F: include/linux/sc[mp]i_protocol.h
SYSTEM RESET/SHUTDOWN DRIVERS
@ -15838,6 +15854,7 @@ F: drivers/firmware/ti_sci*
F: include/linux/soc/ti/ti_sci_protocol.h
F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
F: drivers/soc/ti/ti_sci_pm_domains.c
F: include/dt-bindings/soc/ti,sci_pm_domain.h
F: Documentation/devicetree/bindings/reset/ti,sci-reset.txt
F: Documentation/devicetree/bindings/clock/ti,sci-clk.txt
F: drivers/clk/keystone/sci-clk.c

2
arch/arm/common/scoop.c
View File

@ -8,7 +8,7 @@
*/
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/gpio/driver.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/platform_device.h>

92
arch/arm/mach-davinci/board-da850-evm.c
View File

@ -36,6 +36,7 @@
#include <linux/platform_data/ti-aemif.h>
#include <linux/platform_data/spi-davinci.h>
#include <linux/platform_data/uio_pruss.h>
#include <linux/property.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/tps6507x.h>
#include <linux/regulator/fixed.h>
@ -802,38 +803,80 @@ static const short da850_evm_mmcsd0_pins[] __initconst = {
-1
};
static void da850_panel_power_ctrl(int val)
{
/* lcd backlight */
gpio_set_value(DA850_LCD_BL_PIN, val);
static struct property_entry da850_lcd_backlight_props[] = {
PROPERTY_ENTRY_BOOL("default-on"),
{ }
};
/* lcd power */
gpio_set_value(DA850_LCD_PWR_PIN, val);
}
static struct gpiod_lookup_table da850_lcd_backlight_gpio_table = {
.dev_id = "gpio-backlight",
.table = {
GPIO_LOOKUP("davinci_gpio", DA850_LCD_BL_PIN, NULL, 0),
{ }
},
};
static const struct platform_device_info da850_lcd_backlight_info = {
.name = "gpio-backlight",
.id = PLATFORM_DEVID_NONE,
.properties = da850_lcd_backlight_props,
};
static struct regulator_consumer_supply da850_lcd_supplies[] = {
REGULATOR_SUPPLY("lcd", NULL),
};
static struct regulator_init_data da850_lcd_supply_data = {
.consumer_supplies = da850_lcd_supplies,
.num_consumer_supplies = ARRAY_SIZE(da850_lcd_supplies),
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
};
static struct fixed_voltage_config da850_lcd_supply = {
.supply_name = "lcd",
.microvolts = 33000000,
.init_data = &da850_lcd_supply_data,
};
static struct platform_device da850_lcd_supply_device = {
.name = "reg-fixed-voltage",
.id = 1, /* Dummy fixed regulator is 0 */
.dev = {
.platform_data = &da850_lcd_supply,
},
};
static struct gpiod_lookup_table da850_lcd_supply_gpio_table = {
.dev_id = "reg-fixed-voltage.1",
.table = {
GPIO_LOOKUP("davinci_gpio", DA850_LCD_PWR_PIN, NULL, 0),
{ }
},
};
static struct gpiod_lookup_table *da850_lcd_gpio_lookups[] = {
&da850_lcd_backlight_gpio_table,
&da850_lcd_supply_gpio_table,
};
static int da850_lcd_hw_init(void)
{
struct platform_device *backlight;
int status;
status = gpio_request(DA850_LCD_BL_PIN, "lcd bl");
if (status < 0)
gpiod_add_lookup_tables(da850_lcd_gpio_lookups,
ARRAY_SIZE(da850_lcd_gpio_lookups));
backlight = platform_device_register_full(&da850_lcd_backlight_info);
if (IS_ERR(backlight))
return PTR_ERR(backlight);
status = platform_device_register(&da850_lcd_supply_device);
if (status)
return status;
status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr");
if (status < 0) {
gpio_free(DA850_LCD_BL_PIN);
return status;
}
gpio_direction_output(DA850_LCD_BL_PIN, 0);
gpio_direction_output(DA850_LCD_PWR_PIN, 0);
/* Switch off panel power and backlight */
da850_panel_power_ctrl(0);
/* Switch on panel power and backlight */
da850_panel_power_ctrl(1);
return 0;
}
@ -1443,7 +1486,6 @@ static __init void da850_evm_init(void)
if (ret)
pr_warn("%s: LCD initialization failed: %d\n", __func__, ret);
sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl,
ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
if (ret)
pr_warn("%s: LCDC registration failed: %d\n", __func__, ret);

9
drivers/base/soc.c
View File

@ -33,6 +33,7 @@ static struct bus_type soc_bus_type = {
static DEVICE_ATTR(machine, S_IRUGO, soc_info_get, NULL);
static DEVICE_ATTR(family, S_IRUGO, soc_info_get, NULL);
static DEVICE_ATTR(serial_number, S_IRUGO, soc_info_get, NULL);
static DEVICE_ATTR(soc_id, S_IRUGO, soc_info_get, NULL);
static DEVICE_ATTR(revision, S_IRUGO, soc_info_get, NULL);
@ -57,6 +58,9 @@ static umode_t soc_attribute_mode(struct kobject *kobj,
if ((attr == &dev_attr_revision.attr)
&& (soc_dev->attr->revision != NULL))
return attr->mode;
if ((attr == &dev_attr_serial_number.attr)
&& (soc_dev->attr->serial_number != NULL))
return attr->mode;
if ((attr == &dev_attr_soc_id.attr)
&& (soc_dev->attr->soc_id != NULL))
return attr->mode;
@ -77,6 +81,8 @@ static ssize_t soc_info_get(struct device *dev,
return sprintf(buf, "%s\n", soc_dev->attr->family);
if (attr == &dev_attr_revision)
return sprintf(buf, "%s\n", soc_dev->attr->revision);
if (attr == &dev_attr_serial_number)
return sprintf(buf, "%s\n", soc_dev->attr->serial_number);
if (attr == &dev_attr_soc_id)
return sprintf(buf, "%s\n", soc_dev->attr->soc_id);
@ -87,6 +93,7 @@ static ssize_t soc_info_get(struct device *dev,
static struct attribute *soc_attr[] = {
&dev_attr_machine.attr,
&dev_attr_family.attr,
&dev_attr_serial_number.attr,
&dev_attr_soc_id.attr,
&dev_attr_revision.attr,
NULL,
@ -157,6 +164,7 @@ out2:
out1:
return ERR_PTR(ret);
}
EXPORT_SYMBOL_GPL(soc_device_register);
/* Ensure soc_dev->attr is freed prior to calling soc_device_unregister. */
void soc_device_unregister(struct soc_device *soc_dev)
@ -166,6 +174,7 @@ void soc_device_unregister(struct soc_device *soc_dev)
device_unregister(&soc_dev->dev);
early_soc_dev_attr = NULL;
}
EXPORT_SYMBOL_GPL(soc_device_unregister);
static int __init soc_bus_register(void)
{

10
drivers/bus/Kconfig
View File

@ -29,6 +29,16 @@ config BRCMSTB_GISB_ARB
arbiter. This driver provides timeout and target abort error handling
and internal bus master decoding.
config MOXTET
tristate "CZ.NIC Turris Mox module configuration bus"
depends on SPI_MASTER && OF
help
Say yes here to add support for the module configuration bus found
on CZ.NIC's Turris Mox. This is needed for the ability to discover
the order in which the modules are connected and to get/set some of
their settings. For example the GPIOs on Mox SFP module are
configured through this bus.
config HISILICON_LPC
bool "Support for ISA I/O space on HiSilicon Hip06/7"
depends on ARM64 && (ARCH_HISI || COMPILE_TEST)

1
drivers/bus/Makefile
View File

@ -8,6 +8,7 @@ obj-$(CONFIG_ARM_CCI) += arm-cci.o
obj-$(CONFIG_HISILICON_LPC) += hisi_lpc.o
obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmstb_gisb.o
obj-$(CONFIG_MOXTET) += moxtet.o
# DPAA2 fsl-mc bus
obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/

1
drivers/bus/fsl-mc/fsl-mc-allocator.c
View File

@ -330,7 +330,6 @@ void fsl_mc_object_free(struct fsl_mc_device *mc_adev)
fsl_mc_resource_free(resource);
device_link_del(mc_adev->consumer_link);
mc_adev->consumer_link = NULL;
}
EXPORT_SYMBOL_GPL(fsl_mc_object_free);

1
drivers/bus/fsl-mc/mc-io.c
View File

@ -255,7 +255,6 @@ void fsl_mc_portal_free(struct fsl_mc_io *mc_io)
fsl_destroy_mc_io(mc_io);
fsl_mc_resource_free(resource);
device_link_del(dpmcp_dev->consumer_link);
dpmcp_dev->consumer_link = NULL;
}
EXPORT_SYMBOL_GPL(fsl_mc_portal_free);

34
drivers/bus/imx-weim.c
View File

@ -19,6 +19,8 @@ struct imx_weim_devtype {
unsigned int cs_count;
unsigned int cs_regs_count;
unsigned int cs_stride;
unsigned int wcr_offset;
unsigned int wcr_bcm;
};
static const struct imx_weim_devtype imx1_weim_devtype = {
@ -37,6 +39,8 @@ static const struct imx_weim_devtype imx50_weim_devtype = {
.cs_count = 4,
.cs_regs_count = 6,
.cs_stride = 0x18,
.wcr_offset = 0x90,
.wcr_bcm = BIT(0),
};
static const struct imx_weim_devtype imx51_weim_devtype = {
@ -72,7 +76,7 @@ static const struct of_device_id weim_id_table[] = {
};
MODULE_DEVICE_TABLE(of, weim_id_table);
static int __init imx_weim_gpr_setup(struct platform_device *pdev)
static int imx_weim_gpr_setup(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct property *prop;
@ -122,10 +126,10 @@ err:
}
/* Parse and set the timing for this device. */
static int __init weim_timing_setup(struct device *dev,
struct device_node *np, void __iomem *base,
const struct imx_weim_devtype *devtype,
struct cs_timing_state *ts)
static int weim_timing_setup(struct device *dev,
struct device_node *np, void __iomem *base,
const struct imx_weim_devtype *devtype,
struct cs_timing_state *ts)
{
u32 cs_idx, value[MAX_CS_REGS_COUNT];
int i, ret;
@ -183,8 +187,7 @@ static int __init weim_timing_setup(struct device *dev,
return 0;
}
static int __init weim_parse_dt(struct platform_device *pdev,
void __iomem *base)
static int weim_parse_dt(struct platform_device *pdev, void __iomem *base)
{
const struct of_device_id *of_id = of_match_device(weim_id_table,
&pdev->dev);
@ -192,6 +195,7 @@ static int __init weim_parse_dt(struct platform_device *pdev,
struct device_node *child;
int ret, have_child = 0;
struct cs_timing_state ts = {};
u32 reg;
if (devtype == &imx50_weim_devtype) {
ret = imx_weim_gpr_setup(pdev);
@ -199,6 +203,17 @@ static int __init weim_parse_dt(struct platform_device *pdev,
return ret;
}
if (of_property_read_bool(pdev->dev.of_node, "fsl,burst-clk-enable")) {
if (devtype->wcr_bcm) {
reg = readl(base + devtype->wcr_offset);
writel(reg | devtype->wcr_bcm,
base + devtype->wcr_offset);
} else {
dev_err(&pdev->dev, "burst clk mode not supported.\n");
return -EINVAL;
}
}
for_each_available_child_of_node(pdev->dev.of_node, child) {
ret = weim_timing_setup(&pdev->dev, child, base, devtype, &ts);
if (ret)
@ -217,7 +232,7 @@ static int __init weim_parse_dt(struct platform_device *pdev,
return ret;
}
static int __init weim_probe(struct platform_device *pdev)
static int weim_probe(struct platform_device *pdev)
{
struct resource *res;
struct clk *clk;
@ -254,8 +269,9 @@ static struct platform_driver weim_driver = {
.name = "imx-weim",
.of_match_table = weim_id_table,
},
.probe = weim_probe,
};
module_platform_driver_probe(weim_driver, weim_probe);
module_platform_driver(weim_driver);
MODULE_AUTHOR("Freescale Semiconductor Inc.");
MODULE_DESCRIPTION("i.MX EIM Controller Driver");

885
drivers/bus/moxtet.c 100644
View File

@ -0,0 +1,885 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Turris Mox module configuration bus driver
*
* Copyright (C) 2019 Marek Behun <marek.behun@nic.cz>
*/
#include <dt-bindings/bus/moxtet.h>
#include <linux/bitops.h>
#include <linux/debugfs.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/moxtet.h>
#include <linux/mutex.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/spi/spi.h>
/*
* @name: module name for sysfs
* @hwirq_base: base index for IRQ for this module (-1 if no IRQs)
* @nirqs: how many interrupts does the shift register provide
* @desc: module description for kernel log
*/
static const struct {
const char *name;
int hwirq_base;
int nirqs;
const char *desc;
} mox_module_table[] = {
/* do not change order of this array! */
{ NULL, 0, 0, NULL },
{ "sfp", -1, 0, "MOX D (SFP cage)" },
{ "pci", MOXTET_IRQ_PCI, 1, "MOX B (Mini-PCIe)" },
{ "topaz", MOXTET_IRQ_TOPAZ, 1, "MOX C (4 port switch)" },
{ "peridot", MOXTET_IRQ_PERIDOT(0), 1, "MOX E (8 port switch)" },
{ "usb3", MOXTET_IRQ_USB3, 2, "MOX F (USB 3.0)" },
{ "pci-bridge", -1, 0, "MOX G (Mini-PCIe bridge)" },
};
static inline bool mox_module_known(unsigned int id)
{
return id >= TURRIS_MOX_MODULE_FIRST && id <= TURRIS_MOX_MODULE_LAST;
}
static inline const char *mox_module_name(unsigned int id)
{
if (mox_module_known(id))
return mox_module_table[id].name;
else
return "unknown";
}
#define DEF_MODULE_ATTR(name, fmt, ...) \
static ssize_t \
module_##name##_show(struct device *dev, struct device_attribute *a, \
char *buf) \
{ \
struct moxtet_device *mdev = to_moxtet_device(dev); \
return sprintf(buf, (fmt), __VA_ARGS__); \
} \
static DEVICE_ATTR_RO(module_##name)
DEF_MODULE_ATTR(id, "0x%x\n", mdev->id);
DEF_MODULE_ATTR(name, "%s\n", mox_module_name(mdev->id));
DEF_MODULE_ATTR(description, "%s\n",
mox_module_known(mdev->id) ? mox_module_table[mdev->id].desc
: "");
static struct attribute *moxtet_dev_attrs[] = {
&dev_attr_module_id.attr,
&dev_attr_module_name.attr,
&dev_attr_module_description.attr,
NULL,
};
static const struct attribute_group moxtet_dev_group = {
.attrs = moxtet_dev_attrs,
};
static const struct attribute_group *moxtet_dev_groups[] = {
&moxtet_dev_group,
NULL,
};
static int moxtet_match(struct device *dev, struct device_driver *drv)
{
struct moxtet_device *mdev = to_moxtet_device(dev);
struct moxtet_driver *tdrv = to_moxtet_driver(drv);
const enum turris_mox_module_id *t;
if (of_driver_match_device(dev, drv))
return 1;
if (!tdrv->id_table)
return 0;
for (t = tdrv->id_table; *t; ++t)
if (*t == mdev->id)
return 1;
return 0;
}
struct bus_type moxtet_bus_type = {
.name = "moxtet",
.dev_groups = moxtet_dev_groups,
.match = moxtet_match,
};
EXPORT_SYMBOL_GPL(moxtet_bus_type);
int __moxtet_register_driver(struct module *owner,
struct moxtet_driver *mdrv)
{
mdrv->driver.owner = owner;
mdrv->driver.bus = &moxtet_bus_type;
return driver_register(&mdrv->driver);
}
EXPORT_SYMBOL_GPL(__moxtet_register_driver);
static int moxtet_dev_check(struct device *dev, void *data)
{
struct moxtet_device *mdev = to_moxtet_device(dev);
struct moxtet_device *new_dev = data;
if (mdev->moxtet == new_dev->moxtet && mdev->id == new_dev->id &&
mdev->idx == new_dev->idx)
return -EBUSY;
return 0;
}
static void moxtet_dev_release(struct device *dev)
{
struct moxtet_device *mdev = to_moxtet_device(dev);
put_device(mdev->moxtet->dev);
kfree(mdev);
}
static struct moxtet_device *
moxtet_alloc_device(struct moxtet *moxtet)
{
struct moxtet_device *dev;
if (!get_device(moxtet->dev))
return NULL;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) {
put_device(moxtet->dev);
return NULL;
}
dev->moxtet = moxtet;
dev->dev.parent = moxtet->dev;
dev->dev.bus = &moxtet_bus_type;
dev->dev.release = moxtet_dev_release;
device_initialize(&dev->dev);
return dev;
}
static int moxtet_add_device(struct moxtet_device *dev)
{
static DEFINE_MUTEX(add_mutex);
int ret;
if (dev->idx >= TURRIS_MOX_MAX_MODULES || dev->id > 0xf)
return -EINVAL;
dev_set_name(&dev->dev, "moxtet-%s.%u", mox_module_name(dev->id),
dev->idx);
mutex_lock(&add_mutex);
ret = bus_for_each_dev(&moxtet_bus_type, NULL, dev,
moxtet_dev_check);
if (ret)
goto done;
ret = device_add(&dev->dev);
if (ret < 0)
dev_err(dev->moxtet->dev, "can't add %s, status %d\n",
dev_name(dev->moxtet->dev), ret);
done:
mutex_unlock(&add_mutex);
return ret;
}
static int __unregister(struct device *dev, void *null)
{
if (dev->of_node) {
of_node_clear_flag(dev->of_node, OF_POPULATED);
of_node_put(dev->of_node);
}
device_unregister(dev);
return 0;
}
static struct moxtet_device *
of_register_moxtet_device(struct moxtet *moxtet, struct device_node *nc)
{
struct moxtet_device *dev;
u32 val;
int ret;
dev = moxtet_alloc_device(moxtet);
if (!dev) {
dev_err(moxtet->dev,
"Moxtet device alloc error for %pOF\n", nc);
return ERR_PTR(-ENOMEM);
}
ret = of_property_read_u32(nc, "reg", &val);
if (ret) {
dev_err(moxtet->dev, "%pOF has no valid 'reg' property (%d)\n",
nc, ret);
goto err_put;
}
dev->idx = val;
if (dev->idx >= TURRIS_MOX_MAX_MODULES) {
dev_err(moxtet->dev, "%pOF Moxtet address 0x%x out of range\n",
nc, dev->idx);
ret = -EINVAL;
goto err_put;
}
dev->id = moxtet->modules[dev->idx];
if (!dev->id) {
dev_err(moxtet->dev, "%pOF Moxtet address 0x%x is empty\n", nc,
dev->idx);
ret = -ENODEV;
goto err_put;
}
of_node_get(nc);
dev->dev.of_node = nc;
ret = moxtet_add_device(dev);
if (ret) {
dev_err(moxtet->dev,
"Moxtet device register error for %pOF\n", nc);
of_node_put(nc);
goto err_put;
}
return dev;
err_put:
put_device(&dev->dev);
return ERR_PTR(ret);
}
static void of_register_moxtet_devices(struct moxtet *moxtet)
{
struct moxtet_device *dev;
struct device_node *nc;
if (!moxtet->dev->of_node)
return;
for_each_available_child_of_node(moxtet->dev->of_node, nc) {
if (of_node_test_and_set_flag(nc, OF_POPULATED))
continue;
dev = of_register_moxtet_device(moxtet, nc);
if (IS_ERR(dev)) {
dev_warn(moxtet->dev,
"Failed to create Moxtet device for %pOF\n",
nc);
of_node_clear_flag(nc, OF_POPULATED);
}
}
}
static void
moxtet_register_devices_from_topology(struct moxtet *moxtet)
{
struct moxtet_device *dev;
int i, ret;
for (i = 0; i < moxtet->count; ++i) {
dev = moxtet_alloc_device(moxtet);
if (!dev) {
dev_err(moxtet->dev, "Moxtet device %u alloc error\n",
i);
continue;
}
dev->idx = i;
dev->id = moxtet->modules[i];
ret = moxtet_add_device(dev);
if (ret && ret != -EBUSY) {
put_device(&dev->dev);
dev_err(moxtet->dev,
"Moxtet device %u register error: %i\n", i,
ret);
}
}
}
/*
* @nsame: how many modules with same id are already in moxtet->modules
*/
static int moxtet_set_irq(struct moxtet *moxtet, int idx, int id, int nsame)
{
int i, first;
struct moxtet_irqpos *pos;
first = mox_module_table[id].hwirq_base +
nsame * mox_module_table[id].nirqs;
if (first + mox_module_table[id].nirqs > MOXTET_NIRQS)
return -EINVAL;
for (i = 0; i < mox_module_table[id].nirqs; ++i) {
pos = &moxtet->irq.position[first + i];
pos->idx = idx;
pos->bit = i;
moxtet->irq.exists |= BIT(first + i);
}
return 0;
}
static int moxtet_find_topology(struct moxtet *moxtet)
{
u8 buf[TURRIS_MOX_MAX_MODULES];
int cnts[TURRIS_MOX_MODULE_LAST];
int i, ret;
memset(cnts, 0, sizeof(cnts));
ret = spi_read(to_spi_device(moxtet->dev), buf, TURRIS_MOX_MAX_MODULES);
if (ret < 0)
return ret;
if (buf[0] == TURRIS_MOX_CPU_ID_EMMC) {
dev_info(moxtet->dev, "Found MOX A (eMMC CPU) module\n");
} else if (buf[0] == TURRIS_MOX_CPU_ID_SD) {
dev_info(moxtet->dev, "Found MOX A (CPU) module\n");
} else {
dev_err(moxtet->dev, "Invalid Turris MOX A CPU module 0x%02x\n",
buf[0]);
return -ENODEV;
}
moxtet->count = 0;
for (i = 1; i < TURRIS_MOX_MAX_MODULES; ++i) {
int id;
if (buf[i] == 0xff)
break;
id = buf[i] & 0xf;
moxtet->modules[i-1] = id;
++moxtet->count;
if (mox_module_known(id)) {
dev_info(moxtet->dev, "Found %s module\n",
mox_module_table[id].desc);
if (moxtet_set_irq(moxtet, i-1, id, cnts[id]++) < 0)
dev_err(moxtet->dev,
" Cannot set IRQ for module %s\n",
mox_module_table[id].desc);
} else {
dev_warn(moxtet->dev,
"Unknown Moxtet module found (ID 0x%02x)\n",
id);
}
}
return 0;
}
static int moxtet_spi_read(struct moxtet *moxtet, u8 *buf)
{
struct spi_transfer xfer = {
.rx_buf = buf,
.tx_buf = moxtet->tx,
.len = moxtet->count + 1
};
int ret;
mutex_lock(&moxtet->lock);
ret = spi_sync_transfer(to_spi_device(moxtet->dev), &xfer, 1);
mutex_unlock(&moxtet->lock);
return ret;
}
int moxtet_device_read(struct device *dev)
{
struct moxtet_device *mdev = to_moxtet_device(dev);
struct moxtet *moxtet = mdev->moxtet;
u8 buf[TURRIS_MOX_MAX_MODULES];
int ret;
if (mdev->idx >= moxtet->count)
return -EINVAL;
ret = moxtet_spi_read(moxtet, buf);
if (ret < 0)
return ret;
return buf[mdev->idx + 1] >> 4;
}
EXPORT_SYMBOL_GPL(moxtet_device_read);
int moxtet_device_write(struct device *dev, u8 val)
{
struct moxtet_device *mdev = to_moxtet_device(dev);
struct moxtet *moxtet = mdev->moxtet;
int ret;
if (mdev->idx >= moxtet->count)
return -EINVAL;
mutex_lock(&moxtet->lock);
moxtet->tx[moxtet->count - mdev->idx] = val;
ret = spi_write(to_spi_device(moxtet->dev), moxtet->tx,
moxtet->count + 1);
mutex_unlock(&moxtet->lock);
return ret;
}
EXPORT_SYMBOL_GPL(moxtet_device_write);
int moxtet_device_written(struct device *dev)
{
struct moxtet_device *mdev = to_moxtet_device(dev);
struct moxtet *moxtet = mdev->moxtet;
if (mdev->idx >= moxtet->count)
return -EINVAL;
return moxtet->tx[moxtet->count - mdev->idx];
}
EXPORT_SYMBOL_GPL(moxtet_device_written);
#ifdef CONFIG_DEBUG_FS
static int moxtet_debug_open(struct inode *inode, struct file *file)
{
file->private_data = inode->i_private;
return nonseekable_open(inode, file);
}
static ssize_t input_read(struct file *file, char __user *buf, size_t len,
loff_t *ppos)
{
struct moxtet *moxtet = file->private_data;
u8 bin[TURRIS_MOX_MAX_MODULES];
u8 hex[sizeof(buf) * 2 + 1];
int ret, n;
ret = moxtet_spi_read(moxtet, bin);
if (ret < 0)
return ret;
n = moxtet->count + 1;
bin2hex(hex, bin, n);
hex[2*n] = '\n';
return simple_read_from_buffer(buf, len, ppos, hex, 2*n + 1);
}
static const struct file_operations input_fops = {
.owner = THIS_MODULE,
.open = moxtet_debug_open,
.read = input_read,
.llseek = no_llseek,
};
static ssize_t output_read(struct file *file, char __user *buf, size_t len,
loff_t *ppos)
{
struct moxtet *moxtet = file->private_data;
u8 hex[TURRIS_MOX_MAX_MODULES * 2 + 1];
u8 *p = hex;
int i;
mutex_lock(&moxtet->lock);
for (i = 0; i < moxtet->count; ++i)
p = hex_byte_pack(p, moxtet->tx[moxtet->count - i]);
mutex_unlock(&moxtet->lock);
*p++ = '\n';
return simple_read_from_buffer(buf, len, ppos, hex, p - hex);
}
static ssize_t output_write(struct file *file, const char __user *buf,
size_t len, loff_t *ppos)
{
struct moxtet *moxtet = file->private_data;
u8 bin[TURRIS_MOX_MAX_MODULES];
u8 hex[sizeof(bin) * 2 + 1];
ssize_t res;
loff_t dummy = 0;
int err, i;
if (len > 2 * moxtet->count + 1 || len < 2 * moxtet->count)
return -EINVAL;
res = simple_write_to_buffer(hex, sizeof(hex), &dummy, buf, len);
if (res < 0)
return res;
if (len % 2 == 1 && hex[len - 1] != '\n')
return -EINVAL;
err = hex2bin(bin, hex, moxtet->count);
if (err < 0)
return -EINVAL;
mutex_lock(&moxtet->lock);
for (i = 0; i < moxtet->count; ++i)
moxtet->tx[moxtet->count - i] = bin[i];
err = spi_write(to_spi_device(moxtet->dev), moxtet->tx,
moxtet->count + 1);
mutex_unlock(&moxtet->lock);
return err < 0 ? err : len;
}
static const struct file_operations output_fops = {
.owner = THIS_MODULE,
.open = moxtet_debug_open,
.read = output_read,
.write = output_write,
.llseek = no_llseek,
};
static int moxtet_register_debugfs(struct moxtet *moxtet)
{
struct dentry *root, *entry;
root = debugfs_create_dir("moxtet", NULL);
if (IS_ERR(root))
return PTR_ERR(root);
entry = debugfs_create_file_unsafe("input", 0444, root, moxtet,
&input_fops);
if (IS_ERR(entry))
goto err_remove;
entry = debugfs_create_file_unsafe("output", 0644, root, moxtet,
&output_fops);
if (IS_ERR(entry))
goto err_remove;
moxtet->debugfs_root = root;
return 0;
err_remove:
debugfs_remove_recursive(root);
return PTR_ERR(entry);
}
static void moxtet_unregister_debugfs(struct moxtet *moxtet)
{
debugfs_remove_recursive(moxtet->debugfs_root);
}
#else
static inline int moxtet_register_debugfs(struct moxtet *moxtet)
{
return 0;
}
static inline void moxtet_unregister_debugfs(struct moxtet *moxtet)
{
}
#endif
static int moxtet_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
struct moxtet *moxtet = d->host_data;
if (hw >= MOXTET_NIRQS || !(moxtet->irq.exists & BIT(hw))) {
dev_err(moxtet->dev, "Invalid hw irq number\n");
return -EINVAL;
}
irq_set_chip_data(irq, d->host_data);
irq_set_chip_and_handler(irq, &moxtet->irq.chip, handle_level_irq);
return 0;
}
static int moxtet_irq_domain_xlate(struct irq_domain *d,
struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq,
unsigned int *out_type)
{
struct moxtet *moxtet = d->host_data;
int irq;
if (WARN_ON(intsize < 1))
return -EINVAL;
irq = intspec[0];
if (irq >= MOXTET_NIRQS || !(moxtet->irq.exists & BIT(irq)))
return -EINVAL;
*out_hwirq = irq;
*out_type = IRQ_TYPE_NONE;
return 0;
}
static const struct irq_domain_ops moxtet_irq_domain = {
.map = moxtet_irq_domain_map,
.xlate = moxtet_irq_domain_xlate,
};
static void moxtet_irq_mask(struct irq_data *d)
{
struct moxtet *moxtet = irq_data_get_irq_chip_data(d);
moxtet->irq.masked |= BIT(d->hwirq);
}
static void moxtet_irq_unmask(struct irq_data *d)
{
struct moxtet *moxtet = irq_data_get_irq_chip_data(d);
moxtet->irq.masked &= ~BIT(d->hwirq);
}
static void moxtet_irq_print_chip(struct irq_data *d, struct seq_file *p)
{
struct moxtet *moxtet = irq_data_get_irq_chip_data(d);
struct moxtet_irqpos *pos = &moxtet->irq.position[d->hwirq];
int id;
id = moxtet->modules[pos->idx];
seq_printf(p, " moxtet-%s.%i#%i", mox_module_name(id), pos->idx,
pos->bit);
}
static const struct irq_chip moxtet_irq_chip = {
.name = "moxtet",
.irq_mask = moxtet_irq_mask,
.irq_unmask = moxtet_irq_unmask,
.irq_print_chip = moxtet_irq_print_chip,
};
static int moxtet_irq_read(struct moxtet *moxtet, unsigned long *map)
{
struct moxtet_irqpos *pos = moxtet->irq.position;
u8 buf[TURRIS_MOX_MAX_MODULES];
int i, ret;
ret = moxtet_spi_read(moxtet, buf);
if (ret < 0)
return ret;
*map = 0;
for_each_set_bit(i, &moxtet->irq.exists, MOXTET_NIRQS) {
if (!(buf[pos[i].idx + 1] & BIT(4 + pos[i].bit)))
set_bit(i, map);
}
return 0;
}
static irqreturn_t moxtet_irq_thread_fn(int irq, void *data)
{
struct moxtet *moxtet = data;
unsigned long set;
int nhandled = 0, i, sub_irq, ret;
ret = moxtet_irq_read(moxtet, &set);
if (ret < 0)
goto out;
set &= ~moxtet->irq.masked;
do {
for_each_set_bit(i, &set, MOXTET_NIRQS) {
sub_irq = irq_find_mapping(moxtet->irq.domain, i);
handle_nested_irq(sub_irq);
dev_dbg(moxtet->dev, "%i irq\n", i);
++nhandled;
}
ret = moxtet_irq_read(moxtet, &set);
if (ret < 0)
goto out;
set &= ~moxtet->irq.masked;
} while (set);
out:
return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE);
}
static void moxtet_irq_free(struct moxtet *moxtet)
{
int i, irq;
for (i = 0; i < MOXTET_NIRQS; ++i) {
if (moxtet->irq.exists & BIT(i)) {
irq = irq_find_mapping(moxtet->irq.domain, i);
irq_dispose_mapping(irq);
}
}
irq_domain_remove(moxtet->irq.domain);
}
static int moxtet_irq_setup(struct moxtet *moxtet)
{
int i, ret;
moxtet->irq.domain = irq_domain_add_simple(moxtet->dev->of_node,
MOXTET_NIRQS, 0,
&moxtet_irq_domain, moxtet);
if (moxtet->irq.domain == NULL) {
dev_err(moxtet->dev, "Could not add IRQ domain\n");
return -ENOMEM;
}
for (i = 0; i < MOXTET_NIRQS; ++i)
if (moxtet->irq.exists & BIT(i))
irq_create_mapping(moxtet->irq.domain, i);
moxtet->irq.chip = moxtet_irq_chip;
moxtet->irq.masked = ~0;
ret = request_threaded_irq(moxtet->dev_irq, NULL, moxtet_irq_thread_fn,
IRQF_ONESHOT, "moxtet", moxtet);
if (ret < 0)
goto err_free;
return 0;
err_free:
moxtet_irq_free(moxtet);
return ret;
}
static int moxtet_probe(struct spi_device *spi)
{
struct moxtet *moxtet;
int ret;
ret = spi_setup(spi);
if (ret < 0)
return ret;
moxtet = devm_kzalloc(&spi->dev, sizeof(struct moxtet),
GFP_KERNEL);
if (!moxtet)
return -ENOMEM;
moxtet->dev = &spi->dev;
spi_set_drvdata(spi, moxtet);
mutex_init(&moxtet->lock);
moxtet->dev_irq = of_irq_get(moxtet->dev->of_node, 0);
if (moxtet->dev_irq == -EPROBE_DEFER)
return -EPROBE_DEFER;
if (moxtet->dev_irq <= 0) {
dev_err(moxtet->dev, "No IRQ resource found\n");
return -ENXIO;
}
ret = moxtet_find_topology(moxtet);
if (ret < 0)
return ret;
if (moxtet->irq.exists) {
ret = moxtet_irq_setup(moxtet);
if (ret < 0)
return ret;
}
of_register_moxtet_devices(moxtet);
moxtet_register_devices_from_topology(moxtet);
ret = moxtet_register_debugfs(moxtet);
if (ret < 0)
dev_warn(moxtet->dev, "Failed creating debugfs entries: %i\n",
ret);
return 0;
}
static int moxtet_remove(struct spi_device *spi)
{
struct moxtet *moxtet = spi_get_drvdata(spi);
free_irq(moxtet->dev_irq, moxtet);
moxtet_irq_free(moxtet);
moxtet_unregister_debugfs(moxtet);
device_for_each_child(moxtet->dev, NULL, __unregister);
mutex_destroy(&moxtet->lock);
return 0;
}
static const struct of_device_id moxtet_dt_ids[] = {
{ .compatible = "cznic,moxtet" },
{},
};
MODULE_DEVICE_TABLE(of, moxtet_dt_ids);
static struct spi_driver moxtet_spi_driver = {
.driver = {
.name = "moxtet",
.of_match_table = moxtet_dt_ids,
},
.probe = moxtet_probe,
.remove = moxtet_remove,
};
static int __init moxtet_init(void)
{
int ret;
ret = bus_register(&moxtet_bus_type);
if (ret < 0) {
pr_err("moxtet bus registration failed: %d\n", ret);
goto error;
}
ret = spi_register_driver(&moxtet_spi_driver);
if (ret < 0) {
pr_err("moxtet spi driver registration failed: %d\n", ret);
goto error_bus;
}
return 0;
error_bus:
bus_unregister(&moxtet_bus_type);
error:
return ret;
}
postcore_initcall_sync(moxtet_init);
static void __exit moxtet_exit(void)
{
spi_unregister_driver(&moxtet_spi_driver);
bus_unregister(&moxtet_bus_type);
}
module_exit(moxtet_exit);
MODULE_AUTHOR("Marek Behun <marek.behun@nic.cz>");
MODULE_DESCRIPTION("CZ.NIC's Turris Mox module configuration bus");
MODULE_LICENSE("GPL v2");

4
drivers/bus/sunxi-rsb.c
View File

@ -651,10 +651,8 @@ static int sunxi_rsb_probe(struct platform_device *pdev)
return PTR_ERR(rsb->regs);
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "failed to retrieve irq: %d\n", irq);
if (irq < 0)
return irq;
}
rsb->clk = devm_clk_get(dev, NULL);
if (IS_ERR(rsb->clk)) {

4
drivers/bus/uniphier-system-bus.c
View File

@ -176,7 +176,6 @@ static int uniphier_system_bus_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct uniphier_system_bus_priv *priv;
struct resource *regs;
const __be32 *ranges;
u32 cells, addr, size;
u64 paddr;
@ -186,8 +185,7 @@ static int uniphier_system_bus_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->membase = devm_ioremap_resource(dev, regs);
priv->membase = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->membase))
return PTR_ERR(priv->membase);

2
drivers/clk/clk-scmi.c
View File

@ -69,7 +69,7 @@ static int scmi_clk_set_rate(struct clk_hw *hw, unsigned long rate,
{
struct scmi_clk *clk = to_scmi_clk(hw);
return clk->handle->clk_ops->rate_set(clk->handle, clk->id, 0, rate);
return clk->handle->clk_ops->rate_set(clk->handle, clk->id, rate);
}
static int scmi_clk_enable(struct clk_hw *hw)

14
drivers/firmware/Kconfig
View File

@ -271,6 +271,20 @@ config TRUSTED_FOUNDATIONS
Choose N if you don't know what this is about.
config TURRIS_MOX_RWTM
tristate "Turris Mox rWTM secure firmware driver"
depends on ARCH_MVEBU || COMPILE_TEST
depends on HAS_DMA && OF
depends on MAILBOX
select HW_RANDOM
select ARMADA_37XX_RWTM_MBOX
help
This driver communicates with the firmware on the Cortex-M3 secure
processor of the Turris Mox router. Enable if you are building for
Turris Mox, and you will be able to read the device serial number and
other manufacturing data and also utilize the Entropy Bit Generator
for hardware random number generation.
config HAVE_ARM_SMCCC
bool

1
drivers/firmware/Makefile
View File

@ -22,6 +22,7 @@ obj-$(CONFIG_QCOM_SCM_32) += qcom_scm-32.o
CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQUIRES_SEC=1) -march=armv7-a
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
obj-$(CONFIG_TURRIS_MOX_RWTM) += turris-mox-rwtm.o
obj-$(CONFIG_ARM_SCMI_PROTOCOL) += arm_scmi/
obj-y += psci/

2
drivers/firmware/arm_scmi/Makefile
View File

@ -2,5 +2,5 @@
obj-y = scmi-bus.o scmi-driver.o scmi-protocols.o
scmi-bus-y = bus.o
scmi-driver-y = driver.o
scmi-protocols-y = base.o clock.o perf.o power.o sensors.o
scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o
obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o

2
drivers/firmware/arm_scmi/base.c
View File

@ -204,7 +204,7 @@ static int scmi_base_discover_agent_get(const struct scmi_handle *handle,
if (ret)
return ret;
*(__le32 *)t->tx.buf = cpu_to_le32(id);
put_unaligned_le32(id, t->tx.buf);
ret = scmi_do_xfer(handle, t);
if (!ret)

33
drivers/firmware/arm_scmi/clock.c
View File

@ -56,7 +56,7 @@ struct scmi_msg_resp_clock_describe_rates {
struct scmi_clock_set_rate {
__le32 flags;
#define CLOCK_SET_ASYNC BIT(0)
#define CLOCK_SET_DELAYED BIT(1)
#define CLOCK_SET_IGNORE_RESP BIT(1)
#define CLOCK_SET_ROUND_UP BIT(2)
#define CLOCK_SET_ROUND_AUTO BIT(3)
__le32 id;
@ -67,6 +67,7 @@ struct scmi_clock_set_rate {
struct clock_info {
int num_clocks;
int max_async_req;
atomic_t cur_async_req;
struct scmi_clock_info *clk;
};
@ -106,7 +107,7 @@ static int scmi_clock_attributes_get(const struct scmi_handle *handle,
if (ret)
return ret;
*(__le32 *)t->tx.buf = cpu_to_le32(clk_id);
put_unaligned_le32(clk_id, t->tx.buf);
attr = t->rx.buf;
ret = scmi_do_xfer(handle, t);
@ -203,39 +204,47 @@ scmi_clock_rate_get(const struct scmi_handle *handle, u32 clk_id, u64 *value)
if (ret)
return ret;
*(__le32 *)t->tx.buf = cpu_to_le32(clk_id);
put_unaligned_le32(clk_id, t->tx.buf);
ret = scmi_do_xfer(handle, t);
if (!ret) {
__le32 *pval = t->rx.buf;
*value = le32_to_cpu(*pval);
*value |= (u64)le32_to_cpu(*(pval + 1)) << 32;
}
if (!ret)
*value = get_unaligned_le64(t->rx.buf);
scmi_xfer_put(handle, t);
return ret;
}
static int scmi_clock_rate_set(const struct scmi_handle *handle, u32 clk_id,
u32 config, u64 rate)
u64 rate)
{
int ret;
u32 flags = 0;
struct scmi_xfer *t;
struct scmi_clock_set_rate *cfg;
struct clock_info *ci = handle->clk_priv;
ret = scmi_xfer_get_init(handle, CLOCK_RATE_SET, SCMI_PROTOCOL_CLOCK,
sizeof(*cfg), 0, &t);
if (ret)
return ret;
if (ci->max_async_req &&
atomic_inc_return(&ci->cur_async_req) < ci->max_async_req)
flags |= CLOCK_SET_ASYNC;
cfg = t->tx.buf;
cfg->flags = cpu_to_le32(config);
cfg->flags = cpu_to_le32(flags);
cfg->id = cpu_to_le32(clk_id);
cfg->value_low = cpu_to_le32(rate & 0xffffffff);
cfg->value_high = cpu_to_le32(rate >> 32);
ret = scmi_do_xfer(handle, t);
if (flags & CLOCK_SET_ASYNC)
ret = scmi_do_xfer_with_response(handle, t);
else
ret = scmi_do_xfer(handle, t);
if (ci->max_async_req)
atomic_dec(&ci->cur_async_req);
scmi_xfer_put(handle, t);
return ret;

18
drivers/firmware/arm_scmi/common.h
View File

@ -15,6 +15,8 @@
#include <linux/scmi_protocol.h>
#include <linux/types.h>
#include <asm/unaligned.h>
#define PROTOCOL_REV_MINOR_MASK GENMASK(15, 0)
#define PROTOCOL_REV_MAJOR_MASK GENMASK(31, 16)
#define PROTOCOL_REV_MAJOR(x) (u16)(FIELD_GET(PROTOCOL_REV_MAJOR_MASK, (x)))
@ -48,11 +50,11 @@ struct scmi_msg_resp_prot_version {
/**
* struct scmi_msg_hdr - Message(Tx/Rx) header
*
* @id: The identifier of the command being sent
* @protocol_id: The identifier of the protocol used to send @id command
* @seq: The token to identify the message. when a message/command returns,
* the platform returns the whole message header unmodified including
* the token
* @id: The identifier of the message being sent
* @protocol_id: The identifier of the protocol used to send @id message
* @seq: The token to identify the message. When a message returns, the
* platform returns the whole message header unmodified including the
* token
* @status: Status of the transfer once it's complete
* @poll_completion: Indicate if the transfer needs to be polled for
* completion or interrupt mode is used
@ -84,17 +86,21 @@ struct scmi_msg {
* @rx: Receive message, the buffer should be pre-allocated to store
* message. If request-ACK protocol is used, we can reuse the same
* buffer for the rx path as we use for the tx path.
* @done: completion event
* @done: command message transmit completion event
* @async: pointer to delayed response message received event completion
*/
struct scmi_xfer {
struct scmi_msg_hdr hdr;
struct scmi_msg tx;
struct scmi_msg rx;
struct completion done;
struct completion *async_done;
};
void scmi_xfer_put(const struct scmi_handle *h, struct scmi_xfer *xfer);
int scmi_do_xfer(const struct scmi_handle *h, struct scmi_xfer *xfer);
int scmi_do_xfer_with_response(const struct scmi_handle *h,
struct scmi_xfer *xfer);
int scmi_xfer_get_init(const struct scmi_handle *h, u8 msg_id, u8 prot_id,
size_t tx_size, size_t rx_size, struct scmi_xfer **p);
int scmi_handle_put(const struct scmi_handle *handle);

568
drivers/firmware/arm_scmi/driver.c
View File

@ -30,8 +30,14 @@
#include "common.h"
#define MSG_ID_MASK GENMASK(7, 0)
#define MSG_XTRACT_ID(hdr) FIELD_GET(MSG_ID_MASK, (hdr))
#define MSG_TYPE_MASK GENMASK(9, 8)
#define MSG_XTRACT_TYPE(hdr) FIELD_GET(MSG_TYPE_MASK, (hdr))
#define MSG_TYPE_COMMAND 0
#define MSG_TYPE_DELAYED_RESP 2
#define MSG_TYPE_NOTIFICATION 3
#define MSG_PROTOCOL_ID_MASK GENMASK(17, 10)
#define MSG_XTRACT_PROT_ID(hdr) FIELD_GET(MSG_PROTOCOL_ID_MASK, (hdr))
#define MSG_TOKEN_ID_MASK GENMASK(27, 18)
#define MSG_XTRACT_TOKEN(hdr) FIELD_GET(MSG_TOKEN_ID_MASK, (hdr))
#define MSG_TOKEN_MAX (MSG_XTRACT_TOKEN(MSG_TOKEN_ID_MASK) + 1)
@ -86,7 +92,7 @@ struct scmi_desc {
};
/**
* struct scmi_chan_info - Structure representing a SCMI channel informfation
* struct scmi_chan_info - Structure representing a SCMI channel information
*
* @cl: Mailbox Client
* @chan: Transmit/Receive mailbox channel
@ -111,8 +117,9 @@ struct scmi_chan_info {
* @handle: Instance of SCMI handle to send to clients
* @version: SCMI revision information containing protocol version,
* implementation version and (sub-)vendor identification.
* @minfo: Message info
* @tx_idr: IDR object to map protocol id to channel info pointer
* @tx_minfo: Universal Transmit Message management info
* @tx_idr: IDR object to map protocol id to Tx channel info pointer
* @rx_idr: IDR object to map protocol id to Rx channel info pointer
* @protocols_imp: List of protocols implemented, currently maximum of
* MAX_PROTOCOLS_IMP elements allocated by the base protocol
* @node: List head
@ -123,8 +130,9 @@ struct scmi_info {
const struct scmi_desc *desc;
struct scmi_revision_info version;
struct scmi_handle handle;
struct scmi_xfers_info minfo;
struct scmi_xfers_info tx_minfo;
struct idr tx_idr;
struct idr rx_idr;
u8 *protocols_imp;
struct list_head node;
int users;
@ -182,7 +190,7 @@ static inline int scmi_to_linux_errno(int errno)
static inline void scmi_dump_header_dbg(struct device *dev,
struct scmi_msg_hdr *hdr)
{
dev_dbg(dev, "Command ID: %x Sequence ID: %x Protocol: %x\n",
dev_dbg(dev, "Message ID: %x Sequence ID: %x Protocol: %x\n",
hdr->id, hdr->seq, hdr->protocol_id);
}
@ -190,64 +198,20 @@ static void scmi_fetch_response(struct scmi_xfer *xfer,
struct scmi_shared_mem __iomem *mem)
{
xfer->hdr.status = ioread32(mem->msg_payload);
/* Skip the length of header and statues in payload area i.e 8 bytes*/
/* Skip the length of header and status in payload area i.e 8 bytes */
xfer->rx.len = min_t(size_t, xfer->rx.len, ioread32(&mem->length) - 8);
/* Take a copy to the rx buffer.. */
memcpy_fromio(xfer->rx.buf, mem->msg_payload + 4, xfer->rx.len);
}
/**
* scmi_rx_callback() - mailbox client callback for receive messages
*
* @cl: client pointer
* @m: mailbox message
*
* Processes one received message to appropriate transfer information and
* signals completion of the transfer.
*
* NOTE: This function will be invoked in IRQ context, hence should be
* as optimal as possible.
*/
static void scmi_rx_callback(struct mbox_client *cl, void *m)
{
u16 xfer_id;
struct scmi_xfer *xfer;
struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
struct device *dev = cinfo->dev;
struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
struct scmi_xfers_info *minfo = &info->minfo;
struct scmi_shared_mem __iomem *mem = cinfo->payload;
xfer_id = MSG_XTRACT_TOKEN(ioread32(&mem->msg_header));
/* Are we even expecting this? */
if (!test_bit(xfer_id, minfo->xfer_alloc_table)) {
dev_err(dev, "message for %d is not expected!\n", xfer_id);
return;
}
xfer = &minfo->xfer_block[xfer_id];
scmi_dump_header_dbg(dev, &xfer->hdr);
/* Is the message of valid length? */
if (xfer->rx.len > info->desc->max_msg_size) {
dev_err(dev, "unable to handle %zu xfer(max %d)\n",
xfer->rx.len, info->desc->max_msg_size);
return;
}
scmi_fetch_response(xfer, mem);
complete(&xfer->done);
}
/**
* pack_scmi_header() - packs and returns 32-bit header
*
* @hdr: pointer to header containing all the information on message id,
* protocol id and sequence id.
*
* Return: 32-bit packed command header to be sent to the platform.
* Return: 32-bit packed message header to be sent to the platform.
*/
static inline u32 pack_scmi_header(struct scmi_msg_hdr *hdr)
{
@ -256,6 +220,18 @@ static inline u32 pack_scmi_header(struct scmi_msg_hdr *hdr)
FIELD_PREP(MSG_PROTOCOL_ID_MASK, hdr->protocol_id);
}
/**
* unpack_scmi_header() - unpacks and records message and protocol id
*
* @msg_hdr: 32-bit packed message header sent from the platform
* @hdr: pointer to header to fetch message and protocol id.
*/
static inline void unpack_scmi_header(u32 msg_hdr, struct scmi_msg_hdr *hdr)
{
hdr->id = MSG_XTRACT_ID(msg_hdr);
hdr->protocol_id = MSG_XTRACT_PROT_ID(msg_hdr);
}
/**
* scmi_tx_prepare() - mailbox client callback to prepare for the transfer
*
@ -271,6 +247,14 @@ static void scmi_tx_prepare(struct mbox_client *cl, void *m)
struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
struct scmi_shared_mem __iomem *mem = cinfo->payload;
/*
* Ideally channel must be free by now unless OS timeout last
* request and platform continued to process the same, wait
* until it releases the shared memory, otherwise we may endup
* overwriting its response with new message payload or vice-versa
*/
spin_until_cond(ioread32(&mem->channel_status) &
SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
/* Mark channel busy + clear error */
iowrite32(0x0, &mem->channel_status);
iowrite32(t->hdr.poll_completion ? 0 : SCMI_SHMEM_FLAG_INTR_ENABLED,
@ -285,8 +269,9 @@ static void scmi_tx_prepare(struct mbox_client *cl, void *m)
* scmi_xfer_get() - Allocate one message
*
* @handle: Pointer to SCMI entity handle
* @minfo: Pointer to Tx/Rx Message management info based on channel type
*
* Helper function which is used by various command functions that are
* Helper function which is used by various message functions that are
* exposed to clients of this driver for allocating a message traffic event.
*
* This function can sleep depending on pending requests already in the system
@ -295,13 +280,13 @@ static void scmi_tx_prepare(struct mbox_client *cl, void *m)
*
* Return: 0 if all went fine, else corresponding error.
*/
static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle)
static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle,
struct scmi_xfers_info *minfo)
{
u16 xfer_id;
struct scmi_xfer *xfer;
unsigned long flags, bit_pos;
struct scmi_info *info = handle_to_scmi_info(handle);
struct scmi_xfers_info *minfo = &info->minfo;
/* Keep the locked section as small as possible */
spin_lock_irqsave(&minfo->xfer_lock, flags);
@ -324,18 +309,17 @@ static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle)
}
/**
* scmi_xfer_put() - Release a message
* __scmi_xfer_put() - Release a message
*
* @handle: Pointer to SCMI entity handle
* @minfo: Pointer to Tx/Rx Message management info based on channel type
* @xfer: message that was reserved by scmi_xfer_get
*
* This holds a spinlock to maintain integrity of internal data structures.
*/
void scmi_xfer_put(const struct scmi_handle *handle, struct scmi_xfer *xfer)
static void
__scmi_xfer_put(struct scmi_xfers_info *minfo, struct scmi_xfer *xfer)
{
unsigned long flags;
struct scmi_info *info = handle_to_scmi_info(handle);
struct scmi_xfers_info *minfo = &info->minfo;
/*
* Keep the locked section as small as possible
@ -347,6 +331,68 @@ void scmi_xfer_put(const struct scmi_handle *handle, struct scmi_xfer *xfer)
spin_unlock_irqrestore(&minfo->xfer_lock, flags);
}
/**
* scmi_rx_callback() - mailbox client callback for receive messages
*
* @cl: client pointer
* @m: mailbox message
*
* Processes one received message to appropriate transfer information and
* signals completion of the transfer.
*
* NOTE: This function will be invoked in IRQ context, hence should be
* as optimal as possible.
*/
static void scmi_rx_callback(struct mbox_client *cl, void *m)
{
u8 msg_type;
u32 msg_hdr;
u16 xfer_id;
struct scmi_xfer *xfer;
struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
struct device *dev = cinfo->dev;
struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
struct scmi_xfers_info *minfo = &info->tx_minfo;
struct scmi_shared_mem __iomem *mem = cinfo->payload;
msg_hdr = ioread32(&mem->msg_header);
msg_type = MSG_XTRACT_TYPE(msg_hdr);
xfer_id = MSG_XTRACT_TOKEN(msg_hdr);
if (msg_type == MSG_TYPE_NOTIFICATION)
return; /* Notifications not yet supported */
/* Are we even expecting this? */
if (!test_bit(xfer_id, minfo->xfer_alloc_table)) {
dev_err(dev, "message for %d is not expected!\n", xfer_id);
return;
}
xfer = &minfo->xfer_block[xfer_id];
scmi_dump_header_dbg(dev, &xfer->hdr);
scmi_fetch_response(xfer, mem);
if (msg_type == MSG_TYPE_DELAYED_RESP)
complete(xfer->async_done);
else
complete(&xfer->done);
}
/**
* scmi_xfer_put() - Release a transmit message
*
* @handle: Pointer to SCMI entity handle
* @xfer: message that was reserved by scmi_xfer_get
*/
void scmi_xfer_put(const struct scmi_handle *handle, struct scmi_xfer *xfer)
{
struct scmi_info *info = handle_to_scmi_info(handle);
__scmi_xfer_put(&info->tx_minfo, xfer);
}
static bool
scmi_xfer_poll_done(const struct scmi_chan_info *cinfo, struct scmi_xfer *xfer)
{
@ -435,8 +481,36 @@ int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer)
return ret;
}
#define SCMI_MAX_RESPONSE_TIMEOUT (2 * MSEC_PER_SEC)
/**
* scmi_xfer_get_init() - Allocate and initialise one message
* scmi_do_xfer_with_response() - Do one transfer and wait until the delayed
* response is received
*
* @handle: Pointer to SCMI entity handle
* @xfer: Transfer to initiate and wait for response
*
* Return: -ETIMEDOUT in case of no delayed response, if transmit error,
* return corresponding error, else if all goes well, return 0.
*/
int scmi_do_xfer_with_response(const struct scmi_handle *handle,
struct scmi_xfer *xfer)
{
int ret, timeout = msecs_to_jiffies(SCMI_MAX_RESPONSE_TIMEOUT);
DECLARE_COMPLETION_ONSTACK(async_response);
xfer->async_done = &async_response;
ret = scmi_do_xfer(handle, xfer);
if (!ret && !wait_for_completion_timeout(xfer->async_done, timeout))
ret = -ETIMEDOUT;
xfer->async_done = NULL;
return ret;
}
/**
* scmi_xfer_get_init() - Allocate and initialise one message for transmit
*
* @handle: Pointer to SCMI entity handle
* @msg_id: Message identifier
@ -457,6 +531,7 @@ int scmi_xfer_get_init(const struct scmi_handle *handle, u8 msg_id, u8 prot_id,
int ret;
struct scmi_xfer *xfer;
struct scmi_info *info = handle_to_scmi_info(handle);
struct scmi_xfers_info *minfo = &info->tx_minfo;
struct device *dev = info->dev;
/* Ensure we have sane transfer sizes */
@ -464,7 +539,7 @@ int scmi_xfer_get_init(const struct scmi_handle *handle, u8 msg_id, u8 prot_id,
tx_size > info->desc->max_msg_size)
return -ERANGE;
xfer = scmi_xfer_get(handle);
xfer = scmi_xfer_get(handle, minfo);
if (IS_ERR(xfer)) {
ret = PTR_ERR(xfer);
dev_err(dev, "failed to get free message slot(%d)\n", ret);
@ -597,27 +672,13 @@ int scmi_handle_put(const struct scmi_handle *handle)
return 0;
}
static const struct scmi_desc scmi_generic_desc = {
.max_rx_timeout_ms = 30, /* We may increase this if required */
.max_msg = 20, /* Limited by MBOX_TX_QUEUE_LEN */
.max_msg_size = 128,
};
/* Each compatible listed below must have descriptor associated with it */
static const struct of_device_id scmi_of_match[] = {
{ .compatible = "arm,scmi", .data = &scmi_generic_desc },
{ /* Sentinel */ },
};
MODULE_DEVICE_TABLE(of, scmi_of_match);
static int scmi_xfer_info_init(struct scmi_info *sinfo)
{
int i;
struct scmi_xfer *xfer;
struct device *dev = sinfo->dev;
const struct scmi_desc *desc = sinfo->desc;
struct scmi_xfers_info *info = &sinfo->minfo;
struct scmi_xfers_info *info = &sinfo->tx_minfo;
/* Pre-allocated messages, no more than what hdr.seq can support */
if (WARN_ON(desc->max_msg >= MSG_TOKEN_MAX)) {
@ -652,9 +713,189 @@ static int scmi_xfer_info_init(struct scmi_info *sinfo)
return 0;
}
static int scmi_mailbox_check(struct device_node *np)
static int scmi_mailbox_check(struct device_node *np, int idx)
{
return of_parse_phandle_with_args(np, "mboxes", "#mbox-cells", 0, NULL);
return of_parse_phandle_with_args(np, "mboxes", "#mbox-cells",
idx, NULL);
}
static int scmi_mbox_chan_setup(struct scmi_info *info, struct device *dev,
int prot_id, bool tx)
{
int ret, idx;
struct resource res;
resource_size_t size;
struct device_node *shmem, *np = dev->of_node;
struct scmi_chan_info *cinfo;
struct mbox_client *cl;
struct idr *idr;
const char *desc = tx ? "Tx" : "Rx";
/* Transmit channel is first entry i.e. index 0 */
idx = tx ? 0 : 1;
idr = tx ? &info->tx_idr : &info->rx_idr;
if (scmi_mailbox_check(np, idx)) {
cinfo = idr_find(idr, SCMI_PROTOCOL_BASE);
if (unlikely(!cinfo)) /* Possible only if platform has no Rx */
return -EINVAL;
goto idr_alloc;
}
cinfo = devm_kzalloc(info->dev, sizeof(*cinfo), GFP_KERNEL);
if (!cinfo)
return -ENOMEM;
cinfo->dev = dev;
cl = &cinfo->cl;
cl->dev = dev;
cl->rx_callback = scmi_rx_callback;
cl->tx_prepare = tx ? scmi_tx_prepare : NULL;
cl->tx_block = false;
cl->knows_txdone = tx;
shmem = of_parse_phandle(np, "shmem", idx);
ret = of_address_to_resource(shmem, 0, &res);
of_node_put(shmem);
if (ret) {
dev_err(dev, "failed to get SCMI %s payload memory\n", desc);
return ret;
}
size = resource_size(&res);
cinfo->payload = devm_ioremap(info->dev, res.start, size);
if (!cinfo->payload) {
dev_err(dev, "failed to ioremap SCMI %s payload\n", desc);
return -EADDRNOTAVAIL;
}
cinfo->chan = mbox_request_channel(cl, idx);
if (IS_ERR(cinfo->chan)) {
ret = PTR_ERR(cinfo->chan);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to request SCMI %s mailbox\n",
desc);
return ret;
}
idr_alloc:
ret = idr_alloc(idr, cinfo, prot_id, prot_id + 1, GFP_KERNEL);
if (ret != prot_id) {
dev_err(dev, "unable to allocate SCMI idr slot err %d\n", ret);
return ret;
}
cinfo->handle = &info->handle;
return 0;
}
static inline int
scmi_mbox_txrx_setup(struct scmi_info *info, struct device *dev, int prot_id)
{
int ret = scmi_mbox_chan_setup(info, dev, prot_id, true);
if (!ret) /* Rx is optional, hence no error check */
scmi_mbox_chan_setup(info, dev, prot_id, false);
return ret;
}
static inline void
scmi_create_protocol_device(struct device_node *np, struct scmi_info *info,
int prot_id)
{
struct scmi_device *sdev;
sdev = scmi_device_create(np, info->dev, prot_id);
if (!sdev) {
dev_err(info->dev, "failed to create %d protocol device\n",
prot_id);
return;
}
if (scmi_mbox_txrx_setup(info, &sdev->dev, prot_id)) {
dev_err(&sdev->dev, "failed to setup transport\n");
scmi_device_destroy(sdev);
return;
}
/* setup handle now as the transport is ready */
scmi_set_handle(sdev);
}
static int scmi_probe(struct platform_device *pdev)
{
int ret;
struct scmi_handle *handle;
const struct scmi_desc *desc;
struct scmi_info *info;
struct device *dev = &pdev->dev;
struct device_node *child, *np = dev->of_node;
/* Only mailbox method supported, check for the presence of one */
if (scmi_mailbox_check(np, 0)) {
dev_err(dev, "no mailbox found in %pOF\n", np);
return -EINVAL;
}
desc = of_device_get_match_data(dev);
if (!desc)
return -EINVAL;
info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->dev = dev;
info->desc = desc;
INIT_LIST_HEAD(&info->node);
ret = scmi_xfer_info_init(info);
if (ret)
return ret;
platform_set_drvdata(pdev, info);
idr_init(&info->tx_idr);
idr_init(&info->rx_idr);
handle = &info->handle;
handle->dev = info->dev;
handle->version = &info->version;
ret = scmi_mbox_txrx_setup(info, dev, SCMI_PROTOCOL_BASE);
if (ret)
return ret;
ret = scmi_base_protocol_init(handle);
if (ret) {
dev_err(dev, "unable to communicate with SCMI(%d)\n", ret);
return ret;
}
mutex_lock(&scmi_list_mutex);
list_add_tail(&info->node, &scmi_list);
mutex_unlock(&scmi_list_mutex);
for_each_available_child_of_node(np, child) {
u32 prot_id;
if (of_property_read_u32(child, "reg", &prot_id))
continue;
if (!FIELD_FIT(MSG_PROTOCOL_ID_MASK, prot_id))
dev_err(dev, "Out of range protocol %d\n", prot_id);
if (!scmi_is_protocol_implemented(handle, prot_id)) {
dev_err(dev, "SCMI protocol %d not implemented\n",
prot_id);
continue;
}
scmi_create_protocol_device(child, info, prot_id);
}
return 0;
}
static int scmi_mbox_free_channel(int id, void *p, void *data)
@ -692,167 +933,26 @@ static int scmi_remove(struct platform_device *pdev)
ret = idr_for_each(idr, scmi_mbox_free_channel, idr);
idr_destroy(&info->tx_idr);
idr = &info->rx_idr;
ret = idr_for_each(idr, scmi_mbox_free_channel, idr);
idr_destroy(&info->rx_idr);
return ret;
}
static inline int
scmi_mbox_chan_setup(struct scmi_info *info, struct device *dev, int prot_id)
{
int ret;
struct resource res;
resource_size_t size;
struct device_node *shmem, *np = dev->of_node;
struct scmi_chan_info *cinfo;
struct mbox_client *cl;
static const struct scmi_desc scmi_generic_desc = {
.max_rx_timeout_ms = 30, /* We may increase this if required */
.max_msg = 20, /* Limited by MBOX_TX_QUEUE_LEN */
.max_msg_size = 128,
};
if (scmi_mailbox_check(np)) {
cinfo = idr_find(&info->tx_idr, SCMI_PROTOCOL_BASE);
goto idr_alloc;
}
/* Each compatible listed below must have descriptor associated with it */
static const struct of_device_id scmi_of_match[] = {
{ .compatible = "arm,scmi", .data = &scmi_generic_desc },
{ /* Sentinel */ },
};
cinfo = devm_kzalloc(info->dev, sizeof(*cinfo), GFP_KERNEL);
if (!cinfo)
return -ENOMEM;
cinfo->dev = dev;
cl = &cinfo->cl;
cl->dev = dev;
cl->rx_callback = scmi_rx_callback;
cl->tx_prepare = scmi_tx_prepare;
cl->tx_block = false;
cl->knows_txdone = true;
shmem = of_parse_phandle(np, "shmem", 0);
ret = of_address_to_resource(shmem, 0, &res);
of_node_put(shmem);
if (ret) {
dev_err(dev, "failed to get SCMI Tx payload mem resource\n");
return ret;
}
size = resource_size(&res);
cinfo->payload = devm_ioremap(info->dev, res.start, size);
if (!cinfo->payload) {
dev_err(dev, "failed to ioremap SCMI Tx payload\n");
return -EADDRNOTAVAIL;
}
/* Transmit channel is first entry i.e. index 0 */
cinfo->chan = mbox_request_channel(cl, 0);
if (IS_ERR(cinfo->chan)) {
ret = PTR_ERR(cinfo->chan);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to request SCMI Tx mailbox\n");
return ret;
}
idr_alloc:
ret = idr_alloc(&info->tx_idr, cinfo, prot_id, prot_id + 1, GFP_KERNEL);
if (ret != prot_id) {
dev_err(dev, "unable to allocate SCMI idr slot err %d\n", ret);
return ret;
}
cinfo->handle = &info->handle;
return 0;
}
static inline void
scmi_create_protocol_device(struct device_node *np, struct scmi_info *info,
int prot_id)
{
struct scmi_device *sdev;
sdev = scmi_device_create(np, info->dev, prot_id);
if (!sdev) {
dev_err(info->dev, "failed to create %d protocol device\n",
prot_id);
return;
}
if (scmi_mbox_chan_setup(info, &sdev->dev, prot_id)) {
dev_err(&sdev->dev, "failed to setup transport\n");
scmi_device_destroy(sdev);
return;
}
/* setup handle now as the transport is ready */
scmi_set_handle(sdev);
}
static int scmi_probe(struct platform_device *pdev)
{
int ret;
struct scmi_handle *handle;
const struct scmi_desc *desc;
struct scmi_info *info;
struct device *dev = &pdev->dev;
struct device_node *child, *np = dev->of_node;
/* Only mailbox method supported, check for the presence of one */
if (scmi_mailbox_check(np)) {
dev_err(dev, "no mailbox found in %pOF\n", np);
return -EINVAL;
}
desc = of_device_get_match_data(dev);
if (!desc)
return -EINVAL;
info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->dev = dev;
info->desc = desc;
INIT_LIST_HEAD(&info->node);
ret = scmi_xfer_info_init(info);
if (ret)
return ret;
platform_set_drvdata(pdev, info);
idr_init(&info->tx_idr);
handle = &info->handle;
handle->dev = info->dev;
handle->version = &info->version;
ret = scmi_mbox_chan_setup(info, dev, SCMI_PROTOCOL_BASE);
if (ret)
return ret;
ret = scmi_base_protocol_init(handle);
if (ret) {
dev_err(dev, "unable to communicate with SCMI(%d)\n", ret);
return ret;
}
mutex_lock(&scmi_list_mutex);
list_add_tail(&info->node, &scmi_list);
mutex_unlock(&scmi_list_mutex);
for_each_available_child_of_node(np, child) {
u32 prot_id;
if (of_property_read_u32(child, "reg", &prot_id))
continue;
if (!FIELD_FIT(MSG_PROTOCOL_ID_MASK, prot_id))
dev_err(dev, "Out of range protocol %d\n", prot_id);
if (!scmi_is_protocol_implemented(handle, prot_id)) {
dev_err(dev, "SCMI protocol %d not implemented\n",
prot_id);
continue;
}
scmi_create_protocol_device(child, info, prot_id);
}
return 0;
}
MODULE_DEVICE_TABLE(of, scmi_of_match);
static struct platform_driver scmi_driver = {
.driver = {

264
drivers/firmware/arm_scmi/perf.c
View File

@ -5,7 +5,10 @@
* Copyright (C) 2018 ARM Ltd.
*/
#include <linux/bits.h>
#include <linux/of.h>
#include <linux/io.h>
#include <linux/io-64-nonatomic-hi-lo.h>
#include <linux/platform_device.h>
#include <linux/pm_opp.h>
#include <linux/sort.h>
@ -21,6 +24,7 @@ enum scmi_performance_protocol_cmd {
PERF_LEVEL_GET = 0x8,
PERF_NOTIFY_LIMITS = 0x9,
PERF_NOTIFY_LEVEL = 0xa,
PERF_DESCRIBE_FASTCHANNEL = 0xb,
};
struct scmi_opp {
@ -44,6 +48,7 @@ struct scmi_msg_resp_perf_domain_attributes {
#define SUPPORTS_SET_PERF_LVL(x) ((x) & BIT(30))
#define SUPPORTS_PERF_LIMIT_NOTIFY(x) ((x) & BIT(29))
#define SUPPORTS_PERF_LEVEL_NOTIFY(x) ((x) & BIT(28))
#define SUPPORTS_PERF_FASTCHANNELS(x) ((x) & BIT(27))
__le32 rate_limit_us;
__le32 sustained_freq_khz;
__le32 sustained_perf_level;
@ -87,17 +92,56 @@ struct scmi_msg_resp_perf_describe_levels {
} opp[0];
};
struct scmi_perf_get_fc_info {
__le32 domain;
__le32 message_id;
};
struct scmi_msg_resp_perf_desc_fc {
__le32 attr;
#define SUPPORTS_DOORBELL(x) ((x) & BIT(0))
#define DOORBELL_REG_WIDTH(x) FIELD_GET(GENMASK(2, 1), (x))
__le32 rate_limit;
__le32 chan_addr_low;
__le32 chan_addr_high;
__le32 chan_size;
__le32 db_addr_low;
__le32 db_addr_high;
__le32 db_set_lmask;
__le32 db_set_hmask;
__le32 db_preserve_lmask;
__le32 db_preserve_hmask;
};
struct scmi_fc_db_info {
int width;
u64 set;
u64 mask;
void __iomem *addr;
};
struct scmi_fc_info {
void __iomem *level_set_addr;
void __iomem *limit_set_addr;
void __iomem *level_get_addr;
void __iomem *limit_get_addr;
struct scmi_fc_db_info *level_set_db;
struct scmi_fc_db_info *limit_set_db;
};
struct perf_dom_info {
bool set_limits;
bool set_perf;
bool perf_limit_notify;
bool perf_level_notify;
bool perf_fastchannels;
u32 opp_count;
u32 sustained_freq_khz;
u32 sustained_perf_level;
u32 mult_factor;
char name[SCMI_MAX_STR_SIZE];
struct scmi_opp opp[MAX_OPPS];
struct scmi_fc_info *fc_info;
};
struct scmi_perf_info {
@ -151,7 +195,7 @@ scmi_perf_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
if (ret)
return ret;
*(__le32 *)t->tx.buf = cpu_to_le32(domain);
put_unaligned_le32(domain, t->tx.buf);
attr = t->rx.buf;
ret = scmi_do_xfer(handle, t);
@ -162,6 +206,7 @@ scmi_perf_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
dom_info->set_perf = SUPPORTS_SET_PERF_LVL(flags);
dom_info->perf_limit_notify = SUPPORTS_PERF_LIMIT_NOTIFY(flags);
dom_info->perf_level_notify = SUPPORTS_PERF_LEVEL_NOTIFY(flags);
dom_info->perf_fastchannels = SUPPORTS_PERF_FASTCHANNELS(flags);
dom_info->sustained_freq_khz =
le32_to_cpu(attr->sustained_freq_khz);
dom_info->sustained_perf_level =
@ -249,8 +294,42 @@ scmi_perf_describe_levels_get(const struct scmi_handle *handle, u32 domain,
return ret;
}
static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 domain,
u32 max_perf, u32 min_perf)
#define SCMI_PERF_FC_RING_DB(w) \
do { \
u##w val = 0; \
\
if (db->mask) \
val = ioread##w(db->addr) & db->mask; \
iowrite##w((u##w)db->set | val, db->addr); \
} while (0)
static void scmi_perf_fc_ring_db(struct scmi_fc_db_info *db)
{
if (!db || !db->addr)
return;
if (db->width == 1)
SCMI_PERF_FC_RING_DB(8);
else if (db->width == 2)
SCMI_PERF_FC_RING_DB(16);
else if (db->width == 4)
SCMI_PERF_FC_RING_DB(32);
else /* db->width == 8 */
#ifdef CONFIG_64BIT
SCMI_PERF_FC_RING_DB(64);
#else
{
u64 val = 0;
if (db->mask)
val = ioread64_hi_lo(db->addr) & db->mask;
iowrite64_hi_lo(db->set, db->addr);
}
#endif
}
static int scmi_perf_mb_limits_set(const struct scmi_handle *handle, u32 domain,
u32 max_perf, u32 min_perf)
{
int ret;
struct scmi_xfer *t;
@ -272,8 +351,24 @@ static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 domain,
return ret;
}
static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain,
u32 *max_perf, u32 *min_perf)
static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 domain,
u32 max_perf, u32 min_perf)
{
struct scmi_perf_info *pi = handle->perf_priv;
struct perf_dom_info *dom = pi->dom_info + domain;
if (dom->fc_info && dom->fc_info->limit_set_addr) {
iowrite32(max_perf, dom->fc_info->limit_set_addr);
iowrite32(min_perf, dom->fc_info->limit_set_addr + 4);
scmi_perf_fc_ring_db(dom->fc_info->limit_set_db);
return 0;
}
return scmi_perf_mb_limits_set(handle, domain, max_perf, min_perf);
}
static int scmi_perf_mb_limits_get(const struct scmi_handle *handle, u32 domain,
u32 *max_perf, u32 *min_perf)
{
int ret;
struct scmi_xfer *t;
@ -284,7 +379,7 @@ static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain,
if (ret)
return ret;
*(__le32 *)t->tx.buf = cpu_to_le32(domain);
put_unaligned_le32(domain, t->tx.buf);
ret = scmi_do_xfer(handle, t);
if (!ret) {
@ -298,8 +393,23 @@ static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain,
return ret;
}
static int scmi_perf_level_set(const struct scmi_handle *handle, u32 domain,
u32 level, bool poll)
static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain,
u32 *max_perf, u32 *min_perf)
{
struct scmi_perf_info *pi = handle->perf_priv;
struct perf_dom_info *dom = pi->dom_info + domain;
if (dom->fc_info && dom->fc_info->limit_get_addr) {
*max_perf = ioread32(dom->fc_info->limit_get_addr);
*min_perf = ioread32(dom->fc_info->limit_get_addr + 4);
return 0;
}
return scmi_perf_mb_limits_get(handle, domain, max_perf, min_perf);
}
static int scmi_perf_mb_level_set(const struct scmi_handle *handle, u32 domain,
u32 level, bool poll)
{
int ret;
struct scmi_xfer *t;
@ -321,8 +431,23 @@ static int scmi_perf_level_set(const struct scmi_handle *handle, u32 domain,
return ret;
}
static int scmi_perf_level_get(const struct scmi_handle *handle, u32 domain,
u32 *level, bool poll)
static int scmi_perf_level_set(const struct scmi_handle *handle, u32 domain,
u32 level, bool poll)
{
struct scmi_perf_info *pi = handle->perf_priv;
struct perf_dom_info *dom = pi->dom_info + domain;
if (dom->fc_info && dom->fc_info->level_set_addr) {
iowrite32(level, dom->fc_info->level_set_addr);
scmi_perf_fc_ring_db(dom->fc_info->level_set_db);
return 0;
}
return scmi_perf_mb_level_set(handle, domain, level, poll);
}
static int scmi_perf_mb_level_get(const struct scmi_handle *handle, u32 domain,
u32 *level, bool poll)
{
int ret;
struct scmi_xfer *t;
@ -333,16 +458,128 @@ static int scmi_perf_level_get(const struct scmi_handle *handle, u32 domain,
return ret;
t->hdr.poll_completion = poll;
*(__le32 *)t->tx.buf = cpu_to_le32(domain);
put_unaligned_le32(domain, t->tx.buf);
ret = scmi_do_xfer(handle, t);
if (!ret)
*level = le32_to_cpu(*(__le32 *)t->rx.buf);
*level = get_unaligned_le32(t->rx.buf);
scmi_xfer_put(handle, t);
return ret;
}
static int scmi_perf_level_get(const struct scmi_handle *handle, u32 domain,
u32 *level, bool poll)
{
struct scmi_perf_info *pi = handle->perf_priv;
struct perf_dom_info *dom = pi->dom_info + domain;
if (dom->fc_info && dom->fc_info->level_get_addr) {
*level = ioread32(dom->fc_info->level_get_addr);
return 0;
}
return scmi_perf_mb_level_get(handle, domain, level, poll);
}
static bool scmi_perf_fc_size_is_valid(u32 msg, u32 size)
{
if ((msg == PERF_LEVEL_GET || msg == PERF_LEVEL_SET) && size == 4)
return true;
if ((msg == PERF_LIMITS_GET || msg == PERF_LIMITS_SET) && size == 8)
return true;
return false;
}
static void
scmi_perf_domain_desc_fc(const struct scmi_handle *handle, u32 domain,
u32 message_id, void __iomem **p_addr,
struct scmi_fc_db_info **p_db)
{
int ret;
u32 flags;
u64 phys_addr;
u8 size;
void __iomem *addr;
struct scmi_xfer *t;
struct scmi_fc_db_info *db;
struct scmi_perf_get_fc_info *info;
struct scmi_msg_resp_perf_desc_fc *resp;
if (!p_addr)
return;
ret = scmi_xfer_get_init(handle, PERF_DESCRIBE_FASTCHANNEL,
SCMI_PROTOCOL_PERF,
sizeof(*info), sizeof(*resp), &t);
if (ret)
return;
info = t->tx.buf;
info->domain = cpu_to_le32(domain);
info->message_id = cpu_to_le32(message_id);
ret = scmi_do_xfer(handle, t);
if (ret)
goto err_xfer;
resp = t->rx.buf;
flags = le32_to_cpu(resp->attr);
size = le32_to_cpu(resp->chan_size);
if (!scmi_perf_fc_size_is_valid(message_id, size))
goto err_xfer;
phys_addr = le32_to_cpu(resp->chan_addr_low);
phys_addr |= (u64)le32_to_cpu(resp->chan_addr_high) << 32;
addr = devm_ioremap(handle->dev, phys_addr, size);
if (!addr)
goto err_xfer;
*p_addr = addr;
if (p_db && SUPPORTS_DOORBELL(flags)) {
db = devm_kzalloc(handle->dev, sizeof(*db), GFP_KERNEL);
if (!db)
goto err_xfer;
size = 1 << DOORBELL_REG_WIDTH(flags);
phys_addr = le32_to_cpu(resp->db_addr_low);
phys_addr |= (u64)le32_to_cpu(resp->db_addr_high) << 32;
addr = devm_ioremap(handle->dev, phys_addr, size);
if (!addr)
goto err_xfer;
db->addr = addr;
db->width = size;
db->set = le32_to_cpu(resp->db_set_lmask);
db->set |= (u64)le32_to_cpu(resp->db_set_hmask) << 32;
db->mask = le32_to_cpu(resp->db_preserve_lmask);
db->mask |= (u64)le32_to_cpu(resp->db_preserve_hmask) << 32;
*p_db = db;
}
err_xfer:
scmi_xfer_put(handle, t);
}
static void scmi_perf_domain_init_fc(const struct scmi_handle *handle,
u32 domain, struct scmi_fc_info **p_fc)
{
struct scmi_fc_info *fc;
fc = devm_kzalloc(handle->dev, sizeof(*fc), GFP_KERNEL);
if (!fc)
return;
scmi_perf_domain_desc_fc(handle, domain, PERF_LEVEL_SET,
&fc->level_set_addr, &fc->level_set_db);
scmi_perf_domain_desc_fc(handle, domain, PERF_LEVEL_GET,
&fc->level_get_addr, NULL);
scmi_perf_domain_desc_fc(handle, domain, PERF_LIMITS_SET,
&fc->limit_set_addr, &fc->limit_set_db);
scmi_perf_domain_desc_fc(handle, domain, PERF_LIMITS_GET,
&fc->limit_get_addr, NULL);
*p_fc = fc;
}
/* Device specific ops */
static int scmi_dev_domain_id(struct device *dev)
{
@ -494,6 +731,9 @@ static int scmi_perf_protocol_init(struct scmi_handle *handle)
scmi_perf_domain_attributes_get(handle, domain, dom);
scmi_perf_describe_levels_get(handle, domain, dom);
if (dom->perf_fastchannels)
scmi_perf_domain_init_fc(handle, domain, &dom->fc_info);
}
handle->perf_ops = &perf_ops;

6
drivers/firmware/arm_scmi/power.c
View File

@ -96,7 +96,7 @@ scmi_power_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
if (ret)
return ret;
*(__le32 *)t->tx.buf = cpu_to_le32(domain);
put_unaligned_le32(domain, t->tx.buf);
attr = t->rx.buf;
ret = scmi_do_xfer(handle, t);
@ -147,11 +147,11 @@ scmi_power_state_get(const struct scmi_handle *handle, u32 domain, u32 *state)
if (ret)
return ret;
*(__le32 *)t->tx.buf = cpu_to_le32(domain);
put_unaligned_le32(domain, t->tx.buf);
ret = scmi_do_xfer(handle, t);
if (!ret)
*state = le32_to_cpu(*(__le32 *)t->rx.buf);
*state = get_unaligned_le32(t->rx.buf);
scmi_xfer_put(handle, t);
return ret;

231
drivers/firmware/arm_scmi/reset.c 100644
View File

@ -0,0 +1,231 @@
// SPDX-License-Identifier: GPL-2.0
/*
* System Control and Management Interface (SCMI) Reset Protocol
*
* Copyright (C) 2019 ARM Ltd.
*/
#include "common.h"
enum scmi_reset_protocol_cmd {
RESET_DOMAIN_ATTRIBUTES = 0x3,
RESET = 0x4,
RESET_NOTIFY = 0x5,
};
enum scmi_reset_protocol_notify {
RESET_ISSUED = 0x0,
};
#define NUM_RESET_DOMAIN_MASK 0xffff
#define RESET_NOTIFY_ENABLE BIT(0)
struct scmi_msg_resp_reset_domain_attributes {
__le32 attributes;
#define SUPPORTS_ASYNC_RESET(x) ((x) & BIT(31))
#define SUPPORTS_NOTIFY_RESET(x) ((x) & BIT(30))
__le32 latency;
u8 name[SCMI_MAX_STR_SIZE];
};
struct scmi_msg_reset_domain_reset {
__le32 domain_id;
__le32 flags;
#define AUTONOMOUS_RESET BIT(0)
#define EXPLICIT_RESET_ASSERT BIT(1)
#define ASYNCHRONOUS_RESET BIT(2)
__le32 reset_state;
#define ARCH_RESET_TYPE BIT(31)
#define COLD_RESET_STATE BIT(0)
#define ARCH_COLD_RESET (ARCH_RESET_TYPE | COLD_RESET_STATE)
};
struct reset_dom_info {
bool async_reset;
bool reset_notify;
u32 latency_us;
char name[SCMI_MAX_STR_SIZE];
};
struct scmi_reset_info {
int num_domains;
struct reset_dom_info *dom_info;
};
static int scmi_reset_attributes_get(const struct scmi_handle *handle,
struct scmi_reset_info *pi)
{
int ret;
struct scmi_xfer *t;
u32 attr;
ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
SCMI_PROTOCOL_RESET, 0, sizeof(attr), &t);
if (ret)
return ret;
ret = scmi_do_xfer(handle, t);
if (!ret) {
attr = get_unaligned_le32(t->rx.buf);
pi->num_domains = attr & NUM_RESET_DOMAIN_MASK;
}
scmi_xfer_put(handle, t);
return ret;
}
static int
scmi_reset_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
struct reset_dom_info *dom_info)
{
int ret;
struct scmi_xfer *t;
struct scmi_msg_resp_reset_domain_attributes *attr;
ret = scmi_xfer_get_init(handle, RESET_DOMAIN_ATTRIBUTES,
SCMI_PROTOCOL_RESET, sizeof(domain),
sizeof(*attr), &t);
if (ret)
return ret;
put_unaligned_le32(domain, t->tx.buf);
attr = t->rx.buf;
ret = scmi_do_xfer(handle, t);
if (!ret) {
u32 attributes = le32_to_cpu(attr->attributes);
dom_info->async_reset = SUPPORTS_ASYNC_RESET(attributes);
dom_info->reset_notify = SUPPORTS_NOTIFY_RESET(attributes);
dom_info->latency_us = le32_to_cpu(attr->latency);
if (dom_info->latency_us == U32_MAX)
dom_info->latency_us = 0;
strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
}
scmi_xfer_put(handle, t);
return ret;
}
static int scmi_reset_num_domains_get(const struct scmi_handle *handle)
{
struct scmi_reset_info *pi = handle->reset_priv;
return pi->num_domains;
}
static char *scmi_reset_name_get(const struct scmi_handle *handle, u32 domain)
{
struct scmi_reset_info *pi = handle->reset_priv;
struct reset_dom_info *dom = pi->dom_info + domain;
return dom->name;
}
static int scmi_reset_latency_get(const struct scmi_handle *handle, u32 domain)
{
struct scmi_reset_info *pi = handle->reset_priv;
struct reset_dom_info *dom = pi->dom_info + domain;
return dom->latency_us;
}
static int scmi_domain_reset(const struct scmi_handle *handle, u32 domain,
u32 flags, u32 state)
{
int ret;
struct scmi_xfer *t;
struct scmi_msg_reset_domain_reset *dom;
struct scmi_reset_info *pi = handle->reset_priv;
struct reset_dom_info *rdom = pi->dom_info + domain;
if (rdom->async_reset)
flags |= ASYNCHRONOUS_RESET;
ret = scmi_xfer_get_init(handle, RESET, SCMI_PROTOCOL_RESET,
sizeof(*dom), 0, &t);
if (ret)
return ret;
dom = t->tx.buf;
dom->domain_id = cpu_to_le32(domain);
dom->flags = cpu_to_le32(flags);
dom->domain_id = cpu_to_le32(state);
if (rdom->async_reset)
ret = scmi_do_xfer_with_response(handle, t);
else
ret = scmi_do_xfer(handle, t);
scmi_xfer_put(handle, t);
return ret;
}
static int scmi_reset_domain_reset(const struct scmi_handle *handle, u32 domain)
{
return scmi_domain_reset(handle, domain, AUTONOMOUS_RESET,
ARCH_COLD_RESET);
}
static int
scmi_reset_domain_assert(const struct scmi_handle *handle, u32 domain)
{
return scmi_domain_reset(handle, domain, EXPLICIT_RESET_ASSERT,
ARCH_COLD_RESET);
}
static int
scmi_reset_domain_deassert(const struct scmi_handle *handle, u32 domain)
{
return scmi_domain_reset(handle, domain, 0, ARCH_COLD_RESET);
}
static struct scmi_reset_ops reset_ops = {
.num_domains_get = scmi_reset_num_domains_get,
.name_get = scmi_reset_name_get,
.latency_get = scmi_reset_latency_get,
.reset = scmi_reset_domain_reset,
.assert = scmi_reset_domain_assert,
.deassert = scmi_reset_domain_deassert,
};
static int scmi_reset_protocol_init(struct scmi_handle *handle)
{
int domain;
u32 version;
struct scmi_reset_info *pinfo;
scmi_version_get(handle, SCMI_PROTOCOL_RESET, &version);
dev_dbg(handle->dev, "Reset Version %d.%d\n",
PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
pinfo = devm_kzalloc(handle->dev, sizeof(*pinfo), GFP_KERNEL);
if (!pinfo)
return -ENOMEM;
scmi_reset_attributes_get(handle, pinfo);
pinfo->dom_info = devm_kcalloc(handle->dev, pinfo->num_domains,
sizeof(*pinfo->dom_info), GFP_KERNEL);
if (!pinfo->dom_info)
return -ENOMEM;
for (domain = 0; domain < pinfo->num_domains; domain++) {
struct reset_dom_info *dom = pinfo->dom_info + domain;
scmi_reset_domain_attributes_get(handle, domain, dom);
}
handle->reset_ops = &reset_ops;
handle->reset_priv = pinfo;
return 0;
}
static int __init scmi_reset_init(void)
{
return scmi_protocol_register(SCMI_PROTOCOL_RESET,
&scmi_reset_protocol_init);
}
subsys_initcall(scmi_reset_init);

57
drivers/firmware/arm_scmi/sensors.c
View File

@ -9,8 +9,8 @@
enum scmi_sensor_protocol_cmd {
SENSOR_DESCRIPTION_GET = 0x3,
SENSOR_CONFIG_SET = 0x4,
SENSOR_TRIP_POINT_SET = 0x5,
SENSOR_TRIP_POINT_NOTIFY = 0x4,
SENSOR_TRIP_POINT_CONFIG = 0x5,
SENSOR_READING_GET = 0x6,
};
@ -42,9 +42,10 @@ struct scmi_msg_resp_sensor_description {
} desc[0];
};
struct scmi_msg_set_sensor_config {
struct scmi_msg_sensor_trip_point_notify {
__le32 id;
__le32 event_control;
#define SENSOR_TP_NOTIFY_ALL BIT(0)
};
struct scmi_msg_set_sensor_trip_point {
@ -119,7 +120,7 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
do {
/* Set the number of sensors to be skipped/already read */
*(__le32 *)t->tx.buf = cpu_to_le32(desc_index);
put_unaligned_le32(desc_index, t->tx.buf);
ret = scmi_do_xfer(handle, t);
if (ret)
@ -135,9 +136,10 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
}
for (cnt = 0; cnt < num_returned; cnt++) {
u32 attrh;
u32 attrh, attrl;
struct scmi_sensor_info *s;
attrl = le32_to_cpu(buf->desc[cnt].attributes_low);
attrh = le32_to_cpu(buf->desc[cnt].attributes_high);
s = &si->sensors[desc_index + cnt];
s->id = le32_to_cpu(buf->desc[cnt].id);
@ -146,6 +148,8 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
/* Sign extend to a full s8 */
if (s->scale & SENSOR_SCALE_SIGN)
s->scale |= SENSOR_SCALE_EXTEND;
s->async = SUPPORTS_ASYNC_READ(attrl);
s->num_trip_points = NUM_TRIP_POINTS(attrl);
strlcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE);
}
@ -160,15 +164,15 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
return ret;
}
static int
scmi_sensor_configuration_set(const struct scmi_handle *handle, u32 sensor_id)
static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle,
u32 sensor_id, bool enable)
{
int ret;
u32 evt_cntl = BIT(0);
u32 evt_cntl = enable ? SENSOR_TP_NOTIFY_ALL : 0;
struct scmi_xfer *t;
struct scmi_msg_set_sensor_config *cfg;
struct scmi_msg_sensor_trip_point_notify *cfg;
ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_SET,
ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_NOTIFY,
SCMI_PROTOCOL_SENSOR, sizeof(*cfg), 0, &t);
if (ret)
return ret;
@ -183,15 +187,16 @@ scmi_sensor_configuration_set(const struct scmi_handle *handle, u32 sensor_id)
return ret;
}
static int scmi_sensor_trip_point_set(const struct scmi_handle *handle,
u32 sensor_id, u8 trip_id, u64 trip_value)
static int
scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id,
u8 trip_id, u64 trip_value)
{
int ret;
u32 evt_cntl = SENSOR_TP_BOTH;
struct scmi_xfer *t;
struct scmi_msg_set_sensor_trip_point *trip;
ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_SET,
ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_CONFIG,
SCMI_PROTOCOL_SENSOR, sizeof(*trip), 0, &t);
if (ret)
return ret;
@ -209,11 +214,13 @@ static int scmi_sensor_trip_point_set(const struct scmi_handle *handle,
}
static int scmi_sensor_reading_get(const struct scmi_handle *handle,
u32 sensor_id, bool async, u64 *value)
u32 sensor_id, u64 *value)
{
int ret;
struct scmi_xfer *t;
struct scmi_msg_sensor_reading_get *sensor;
struct sensors_info *si = handle->sensor_priv;
struct scmi_sensor_info *s = si->sensors + sensor_id;
ret = scmi_xfer_get_init(handle, SENSOR_READING_GET,
SCMI_PROTOCOL_SENSOR, sizeof(*sensor),
@ -223,14 +230,18 @@ static int scmi_sensor_reading_get(const struct scmi_handle *handle,
sensor = t->tx.buf;
sensor->id = cpu_to_le32(sensor_id);
sensor->flags = cpu_to_le32(async ? SENSOR_READ_ASYNC : 0);
ret = scmi_do_xfer(handle, t);
if (!ret) {
__le32 *pval = t->rx.buf;
*value = le32_to_cpu(*pval);
*value |= (u64)le32_to_cpu(*(pval + 1)) << 32;
if (s->async) {
sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC);
ret = scmi_do_xfer_with_response(handle, t);
if (!ret)
*value = get_unaligned_le64((void *)
((__le32 *)t->rx.buf + 1));
} else {
sensor->flags = cpu_to_le32(0);
ret = scmi_do_xfer(handle, t);
if (!ret)
*value = get_unaligned_le64(t->rx.buf);
}
scmi_xfer_put(handle, t);
@ -255,8 +266,8 @@ static int scmi_sensor_count_get(const struct scmi_handle *handle)
static struct scmi_sensor_ops sensor_ops = {
.count_get = scmi_sensor_count_get,
.info_get = scmi_sensor_info_get,
.configuration_set = scmi_sensor_configuration_set,
.trip_point_set = scmi_sensor_trip_point_set,
.trip_point_notify = scmi_sensor_trip_point_notify,
.trip_point_config = scmi_sensor_trip_point_config,
.reading_get = scmi_sensor_reading_get,
};

11
drivers/firmware/imx/Kconfig
View File

@ -1,4 +1,15 @@
# SPDX-License-Identifier: GPL-2.0-only
config IMX_DSP
bool "IMX DSP Protocol driver"
depends on IMX_MBOX
help
This enables DSP IPC protocol between host AP (Linux)
and the firmware running on DSP.
DSP exists on some i.MX8 processors (e.g i.MX8QM, i.MX8QXP).
It acts like a doorbell. Client might use shared memory to
exchange information with DSP side.
config IMX_SCU
bool "IMX SCU Protocol driver"
depends on IMX_MBOX

1
drivers/firmware/imx/Makefile
View File

@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_IMX_DSP) += imx-dsp.o
obj-$(CONFIG_IMX_SCU) += imx-scu.o misc.o imx-scu-irq.o
obj-$(CONFIG_IMX_SCU_PD) += scu-pd.o

155
drivers/firmware/imx/imx-dsp.c 100644
View File

@ -0,0 +1,155 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2019 NXP
* Author: Daniel Baluta <daniel.baluta@nxp.com>
*
* Implementation of the DSP IPC interface (host side)
*/
#include <linux/firmware/imx/dsp.h>
#include <linux/kernel.h>
#include <linux/mailbox_client.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
/*
* imx_dsp_ring_doorbell - triggers an interrupt on the other side (DSP)
*
* @dsp: DSP IPC handle
* @chan_idx: index of the channel where to trigger the interrupt
*
* Returns non-negative value for success, negative value for error
*/
int imx_dsp_ring_doorbell(struct imx_dsp_ipc *ipc, unsigned int idx)
{
int ret;
struct imx_dsp_chan *dsp_chan;
if (idx >= DSP_MU_CHAN_NUM)
return -EINVAL;
dsp_chan = &ipc->chans[idx];
ret = mbox_send_message(dsp_chan->ch, NULL);
if (ret < 0)
return ret;
return 0;
}
EXPORT_SYMBOL(imx_dsp_ring_doorbell);
/*
* imx_dsp_handle_rx - rx callback used by imx mailbox
*
* @c: mbox client
* @msg: message received
*
* Users of DSP IPC will need to privde handle_reply and handle_request
* callbacks.
*/
static void imx_dsp_handle_rx(struct mbox_client *c, void *msg)
{
struct imx_dsp_chan *chan = container_of(c, struct imx_dsp_chan, cl);
if (chan->idx == 0) {
chan->ipc->ops->handle_reply(chan->ipc);
} else {
chan->ipc->ops->handle_request(chan->ipc);
imx_dsp_ring_doorbell(chan->ipc, 1);
}
}
static int imx_dsp_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct imx_dsp_ipc *dsp_ipc;
struct imx_dsp_chan *dsp_chan;
struct mbox_client *cl;
char *chan_name;
int ret;
int i, j;
device_set_of_node_from_dev(&pdev->dev, pdev->dev.parent);
dsp_ipc = devm_kzalloc(dev, sizeof(*dsp_ipc), GFP_KERNEL);
if (!dsp_ipc)
return -ENOMEM;
for (i = 0; i < DSP_MU_CHAN_NUM; i++) {
if (i < 2)
chan_name = kasprintf(GFP_KERNEL, "txdb%d", i);
else
chan_name = kasprintf(GFP_KERNEL, "rxdb%d", i - 2);
if (!chan_name)
return -ENOMEM;
dsp_chan = &dsp_ipc->chans[i];
cl = &dsp_chan->cl;
cl->dev = dev;
cl->tx_block = false;
cl->knows_txdone = true;
cl->rx_callback = imx_dsp_handle_rx;
dsp_chan->ipc = dsp_ipc;
dsp_chan->idx = i % 2;
dsp_chan->ch = mbox_request_channel_byname(cl, chan_name);
if (IS_ERR(dsp_chan->ch)) {
ret = PTR_ERR(dsp_chan->ch);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to request mbox chan %s ret %d\n",
chan_name, ret);
goto out;
}
dev_dbg(dev, "request mbox chan %s\n", chan_name);
/* chan_name is not used anymore by framework */
kfree(chan_name);
}
dsp_ipc->dev = dev;
dev_set_drvdata(dev, dsp_ipc);
dev_info(dev, "NXP i.MX DSP IPC initialized\n");
return devm_of_platform_populate(dev);
out:
kfree(chan_name);
for (j = 0; j < i; j++) {
dsp_chan = &dsp_ipc->chans[j];
mbox_free_channel(dsp_chan->ch);
}
return ret;
}
static int imx_dsp_remove(struct platform_device *pdev)
{
struct imx_dsp_chan *dsp_chan;
struct imx_dsp_ipc *dsp_ipc;
int i;
dsp_ipc = dev_get_drvdata(&pdev->dev);
for (i = 0; i < DSP_MU_CHAN_NUM; i++) {
dsp_chan = &dsp_ipc->chans[i];
mbox_free_channel(dsp_chan->ch);
}
return 0;
}
static struct platform_driver imx_dsp_driver = {
.driver = {
.name = "imx-dsp",
},
.probe = imx_dsp_probe,
.remove = imx_dsp_remove,
};
builtin_platform_driver(imx_dsp_driver);
MODULE_AUTHOR("Daniel Baluta <daniel.baluta@nxp.com>");
MODULE_DESCRIPTION("IMX DSP IPC protocol driver");
MODULE_LICENSE("GPL v2");

4
drivers/firmware/imx/scu-pd.c
View File

@ -92,7 +92,8 @@ static const struct imx_sc_pd_range imx8qxp_scu_pd_ranges[] = {
{ "gpt", IMX_SC_R_GPT_0, 5, true, 0 },
{ "kpp", IMX_SC_R_KPP, 1, false, 0 },
{ "fspi", IMX_SC_R_FSPI_0, 2, true, 0 },
{ "mu", IMX_SC_R_MU_0A, 14, true, 0 },
{ "mu_a", IMX_SC_R_MU_0A, 14, true, 0 },
{ "mu_b", IMX_SC_R_MU_13B, 1, true, 13 },
/* CONN SS */
{ "usb", IMX_SC_R_USB_0, 2, true, 0 },
@ -130,6 +131,7 @@ static const struct imx_sc_pd_range imx8qxp_scu_pd_ranges[] = {
{ "lcd0-pwm", IMX_SC_R_LCD_0_PWM_0, 1, true, 0 },
{ "lpuart", IMX_SC_R_UART_0, 4, true, 0 },
{ "lpspi", IMX_SC_R_SPI_0, 4, true, 0 },
{ "irqstr_dsp", IMX_SC_R_IRQSTR_DSP, 1, false, 0 },
/* VPU SS */
{ "vpu", IMX_SC_R_VPU, 1, false, 0 },

47
drivers/firmware/qcom_scm.c
View File

@ -9,6 +9,7 @@
#include <linux/init.h>
#include <linux/cpumask.h>
#include <linux/export.h>
#include <linux/dma-direct.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/types.h>
@ -425,21 +426,23 @@ EXPORT_SYMBOL(qcom_scm_set_remote_state);
* @mem_sz: size of the region.
* @srcvm: vmid for current set of owners, each set bit in
* flag indicate a unique owner
* @newvm: array having new owners and corrsponding permission
* @newvm: array having new owners and corresponding permission
* flags
* @dest_cnt: number of owners in next set.
*
* Return negative errno on failure, 0 on success, with @srcvm updated.
* Return negative errno on failure or 0 on success with @srcvm updated.
*/
int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
unsigned int *srcvm,
struct qcom_scm_vmperm *newvm, int dest_cnt)
const struct qcom_scm_vmperm *newvm,
unsigned int dest_cnt)
{
struct qcom_scm_current_perm_info *destvm;
struct qcom_scm_mem_map_info *mem_to_map;
phys_addr_t mem_to_map_phys;
phys_addr_t dest_phys;
phys_addr_t ptr_phys;
dma_addr_t ptr_dma;
size_t mem_to_map_sz;
size_t dest_sz;
size_t src_sz;
@ -447,52 +450,50 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
int next_vm;
__le32 *src;
void *ptr;
int ret;
int len;
int i;
int ret, i, b;
unsigned long srcvm_bits = *srcvm;
src_sz = hweight_long(*srcvm) * sizeof(*src);
src_sz = hweight_long(srcvm_bits) * sizeof(*src);
mem_to_map_sz = sizeof(*mem_to_map);
dest_sz = dest_cnt * sizeof(*destvm);
ptr_sz = ALIGN(src_sz, SZ_64) + ALIGN(mem_to_map_sz, SZ_64) +
ALIGN(dest_sz, SZ_64);
ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_phys, GFP_KERNEL);
ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_dma, GFP_KERNEL);
if (!ptr)
return -ENOMEM;
ptr_phys = dma_to_phys(__scm->dev, ptr_dma);
/* Fill source vmid detail */
src = ptr;
len = hweight_long(*srcvm);
for (i = 0; i < len; i++) {
src[i] = cpu_to_le32(ffs(*srcvm) - 1);
*srcvm ^= 1 << (ffs(*srcvm) - 1);
}
i = 0;
for_each_set_bit(b, &srcvm_bits, BITS_PER_LONG)
src[i++] = cpu_to_le32(b);
/* Fill details of mem buff to map */
mem_to_map = ptr + ALIGN(src_sz, SZ_64);
mem_to_map_phys = ptr_phys + ALIGN(src_sz, SZ_64);
mem_to_map[0].mem_addr = cpu_to_le64(mem_addr);
mem_to_map[0].mem_size = cpu_to_le64(mem_sz);
mem_to_map->mem_addr = cpu_to_le64(mem_addr);
mem_to_map->mem_size = cpu_to_le64(mem_sz);
next_vm = 0;
/* Fill details of next vmid detail */
destvm = ptr + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64);
dest_phys = ptr_phys + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64);
for (i = 0; i < dest_cnt; i++) {
destvm[i].vmid = cpu_to_le32(newvm[i].vmid);
destvm[i].perm = cpu_to_le32(newvm[i].perm);
destvm[i].ctx = 0;
destvm[i].ctx_size = 0;
next_vm |= BIT(newvm[i].vmid);
for (i = 0; i < dest_cnt; i++, destvm++, newvm++) {
destvm->vmid = cpu_to_le32(newvm->vmid);
destvm->perm = cpu_to_le32(newvm->perm);
destvm->ctx = 0;
destvm->ctx_size = 0;
next_vm |= BIT(newvm->vmid);
}
ret = __qcom_scm_assign_mem(__scm->dev, mem_to_map_phys, mem_to_map_sz,
ptr_phys, src_sz, dest_phys, dest_sz);
dma_free_coherent(__scm->dev, ALIGN(ptr_sz, SZ_64), ptr, ptr_phys);
dma_free_coherent(__scm->dev, ptr_sz, ptr, ptr_dma);
if (ret) {
dev_err(__scm->dev,
"Assign memory protection call failed %d.\n", ret);
"Assign memory protection call failed %d\n", ret);
return -EINVAL;
}

45
drivers/firmware/ti_sci.c
View File

@ -635,6 +635,7 @@ fail:
/**
* ti_sci_cmd_get_device() - command to request for device managed by TISCI
* that can be shared with other hosts.
* @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
* @id: Device Identifier
*
@ -642,11 +643,29 @@ fail:
* usage count by balancing get_device with put_device. No refcounting is
* managed by driver for that purpose.
*
* NOTE: The request is for exclusive access for the processor.
*
* Return: 0 if all went fine, else return appropriate error.
*/
static int ti_sci_cmd_get_device(const struct ti_sci_handle *handle, u32 id)
{
return ti_sci_set_device_state(handle, id, 0,
MSG_DEVICE_SW_STATE_ON);
}
/**
* ti_sci_cmd_get_device_exclusive() - command to request for device managed by
* TISCI that is exclusively owned by the
* requesting host.
* @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
* @id: Device Identifier
*
* Request for the device - NOTE: the client MUST maintain integrity of
* usage count by balancing get_device with put_device. No refcounting is
* managed by driver for that purpose.
*
* Return: 0 if all went fine, else return appropriate error.
*/
static int ti_sci_cmd_get_device_exclusive(const struct ti_sci_handle *handle,
u32 id)
{
return ti_sci_set_device_state(handle, id,
MSG_FLAG_DEVICE_EXCLUSIVE,
@ -665,6 +684,26 @@ static int ti_sci_cmd_get_device(const struct ti_sci_handle *handle, u32 id)
* Return: 0 if all went fine, else return appropriate error.
*/
static int ti_sci_cmd_idle_device(const struct ti_sci_handle *handle, u32 id)
{
return ti_sci_set_device_state(handle, id, 0,
MSG_DEVICE_SW_STATE_RETENTION);
}
/**
* ti_sci_cmd_idle_device_exclusive() - Command to idle a device managed by
* TISCI that is exclusively owned by
* requesting host.
* @handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
* @id: Device Identifier
*
* Request for the device - NOTE: the client MUST maintain integrity of
* usage count by balancing get_device with put_device. No refcounting is
* managed by driver for that purpose.
*
* Return: 0 if all went fine, else return appropriate error.
*/
static int ti_sci_cmd_idle_device_exclusive(const struct ti_sci_handle *handle,
u32 id)
{
return ti_sci_set_device_state(handle, id,
MSG_FLAG_DEVICE_EXCLUSIVE,
@ -2894,7 +2933,9 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
core_ops->reboot_device = ti_sci_cmd_core_reboot;
dops->get_device = ti_sci_cmd_get_device;
dops->get_device_exclusive = ti_sci_cmd_get_device_exclusive;
dops->idle_device = ti_sci_cmd_idle_device;
dops->idle_device_exclusive = ti_sci_cmd_idle_device_exclusive;
dops->put_device = ti_sci_cmd_put_device;
dops->is_valid = ti_sci_cmd_dev_is_valid;

384
drivers/firmware/turris-mox-rwtm.c 100644
View File

@ -0,0 +1,384 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Turris Mox rWTM firmware driver
*
* Copyright (C) 2019 Marek Behun <marek.behun@nic.cz>
*/
#include <linux/armada-37xx-rwtm-mailbox.h>
#include <linux/completion.h>
#include <linux/dma-mapping.h>
#include <linux/hw_random.h>
#include <linux/mailbox_client.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#define DRIVER_NAME "turris-mox-rwtm"
/*
* The macros and constants below come from Turris Mox's rWTM firmware code.
* This firmware is open source and it's sources can be found at
* https://gitlab.labs.nic.cz/turris/mox-boot-builder/tree/master/wtmi.
*/
#define MBOX_STS_SUCCESS (0 << 30)
#define MBOX_STS_FAIL (1 << 30)
#define MBOX_STS_BADCMD (2 << 30)
#define MBOX_STS_ERROR(s) ((s) & (3 << 30))
#define MBOX_STS_VALUE(s) (((s) >> 10) & 0xfffff)
#define MBOX_STS_CMD(s) ((s) & 0x3ff)
enum mbox_cmd {
MBOX_CMD_GET_RANDOM = 1,
MBOX_CMD_BOARD_INFO = 2,
MBOX_CMD_ECDSA_PUB_KEY = 3,
MBOX_CMD_HASH = 4,
MBOX_CMD_SIGN = 5,
MBOX_CMD_VERIFY = 6,
MBOX_CMD_OTP_READ = 7,
MBOX_CMD_OTP_WRITE = 8,
};
struct mox_kobject;
struct mox_rwtm {
struct device *dev;
struct mbox_client mbox_client;
struct mbox_chan *mbox;
struct mox_kobject *kobj;
struct hwrng hwrng;
struct armada_37xx_rwtm_rx_msg reply;
void *buf;
dma_addr_t buf_phys;
struct mutex busy;
struct completion cmd_done;
/* board information */
int has_board_info;
u64 serial_number;
int board_version, ram_size;
u8 mac_address1[6], mac_address2[6];
/* public key burned in eFuse */
int has_pubkey;
u8 pubkey[135];
};
struct mox_kobject {
struct kobject kobj;
struct mox_rwtm *rwtm;
};
static inline struct kobject *rwtm_to_kobj(struct mox_rwtm *rwtm)
{
return &rwtm->kobj->kobj;
}
static inline struct mox_rwtm *to_rwtm(struct kobject *kobj)
{
return container_of(kobj, struct mox_kobject, kobj)->rwtm;
}
static void mox_kobj_release(struct kobject *kobj)
{
kfree(to_rwtm(kobj)->kobj);
}
static struct kobj_type mox_kobj_ktype = {
.release = mox_kobj_release,
.sysfs_ops = &kobj_sysfs_ops,
};
static int mox_kobj_create(struct mox_rwtm *rwtm)
{
rwtm->kobj = kzalloc(sizeof(*rwtm->kobj), GFP_KERNEL);
if (!rwtm->kobj)
return -ENOMEM;
kobject_init(rwtm_to_kobj(rwtm), &mox_kobj_ktype);
if (kobject_add(rwtm_to_kobj(rwtm), firmware_kobj, "turris-mox-rwtm")) {
kobject_put(rwtm_to_kobj(rwtm));
return -ENXIO;
}
rwtm->kobj->rwtm = rwtm;
return 0;
}
#define MOX_ATTR_RO(name, format, cat) \
static ssize_t \
name##_show(struct kobject *kobj, struct kobj_attribute *a, \
char *buf) \
{ \
struct mox_rwtm *rwtm = to_rwtm(kobj); \
if (!rwtm->has_##cat) \
return -ENODATA; \
return sprintf(buf, format, rwtm->name); \
} \
static struct kobj_attribute mox_attr_##name = __ATTR_RO(name)
MOX_ATTR_RO(serial_number, "%016llX\n", board_info);
MOX_ATTR_RO(board_version, "%i\n", board_info);
MOX_ATTR_RO(ram_size, "%i\n", board_info);
MOX_ATTR_RO(mac_address1, "%pM\n", board_info);
MOX_ATTR_RO(mac_address2, "%pM\n", board_info);
MOX_ATTR_RO(pubkey, "%s\n", pubkey);
static int mox_get_status(enum mbox_cmd cmd, u32 retval)
{
if (MBOX_STS_CMD(retval) != cmd ||
MBOX_STS_ERROR(retval) != MBOX_STS_SUCCESS)
return -EIO;
else if (MBOX_STS_ERROR(retval) == MBOX_STS_FAIL)
return -(int)MBOX_STS_VALUE(retval);
else
return MBOX_STS_VALUE(retval);
}
static const struct attribute *mox_rwtm_attrs[] = {
&mox_attr_serial_number.attr,
&mox_attr_board_version.attr,
&mox_attr_ram_size.attr,
&mox_attr_mac_address1.attr,
&mox_attr_mac_address2.attr,
&mox_attr_pubkey.attr,
NULL
};
static void mox_rwtm_rx_callback(struct mbox_client *cl, void *data)
{
struct mox_rwtm *rwtm = dev_get_drvdata(cl->dev);
struct armada_37xx_rwtm_rx_msg *msg = data;
rwtm->reply = *msg;
complete(&rwtm->cmd_done);
}
static void reply_to_mac_addr(u8 *mac, u32 t1, u32 t2)
{
mac[0] = t1 >> 8;
mac[1] = t1;
mac[2] = t2 >> 24;
mac[3] = t2 >> 16;
mac[4] = t2 >> 8;
mac[5] = t2;
}
static int mox_get_board_info(struct mox_rwtm *rwtm)
{
struct armada_37xx_rwtm_tx_msg msg;
struct armada_37xx_rwtm_rx_msg *reply = &rwtm->reply;
int ret;
msg.command = MBOX_CMD_BOARD_INFO;
ret = mbox_send_message(rwtm->mbox, &msg);
if (ret < 0)
return ret;
ret = wait_for_completion_timeout(&rwtm->cmd_done, HZ / 2);
if (ret < 0)
return ret;
ret = mox_get_status(MBOX_CMD_BOARD_INFO, reply->retval);
if (ret < 0 && ret != -ENODATA) {
return ret;
} else if (ret == -ENODATA) {
dev_warn(rwtm->dev,
"Board does not have manufacturing information burned!\n");
} else {
rwtm->serial_number = reply->status[1];
rwtm->serial_number <<= 32;
rwtm->serial_number |= reply->status[0];
rwtm->board_version = reply->status[2];
rwtm->ram_size = reply->status[3];
reply_to_mac_addr(rwtm->mac_address1, reply->status[4],
reply->status[5]);
reply_to_mac_addr(rwtm->mac_address2, reply->status[6],
reply->status[7]);
rwtm->has_board_info = 1;
pr_info("Turris Mox serial number %016llX\n",
rwtm->serial_number);
pr_info(" board version %i\n", rwtm->board_version);
pr_info(" burned RAM size %i MiB\n", rwtm->ram_size);
}
msg.command = MBOX_CMD_ECDSA_PUB_KEY;
ret = mbox_send_message(rwtm->mbox, &msg);
if (ret < 0)
return ret;
ret = wait_for_completion_timeout(&rwtm->cmd_done, HZ / 2);
if (ret < 0)
return ret;
ret = mox_get_status(MBOX_CMD_ECDSA_PUB_KEY, reply->retval);
if (ret < 0 && ret != -ENODATA) {
return ret;
} else if (ret == -ENODATA) {
dev_warn(rwtm->dev, "Board has no public key burned!\n");
} else {
u32 *s = reply->status;
rwtm->has_pubkey = 1;
sprintf(rwtm->pubkey,
"%06x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x",
ret, s[0], s[1], s[2], s[3], s[4], s[5], s[6], s[7],
s[8], s[9], s[10], s[11], s[12], s[13], s[14], s[15]);
}
return 0;
}
static int mox_hwrng_read(struct hwrng *rng, void *data, size_t max, bool wait)
{
struct mox_rwtm *rwtm = (struct mox_rwtm *) rng->priv;
struct armada_37xx_rwtm_tx_msg msg;
int ret;
if (max > 4096)
max = 4096;
msg.command = MBOX_CMD_GET_RANDOM;
msg.args[0] = 1;
msg.args[1] = rwtm->buf_phys;
msg.args[2] = (max + 3) & ~3;
if (!wait) {
if (!mutex_trylock(&rwtm->busy))
return -EBUSY;
} else {
mutex_lock(&rwtm->busy);
}
ret = mbox_send_message(rwtm->mbox, &msg);
if (ret < 0)
goto unlock_mutex;
ret = wait_for_completion_interruptible(&rwtm->cmd_done);
if (ret < 0)
goto unlock_mutex;
ret = mox_get_status(MBOX_CMD_GET_RANDOM, rwtm->reply.retval);
if (ret < 0)
goto unlock_mutex;
memcpy(data, rwtm->buf, max);
ret = max;
unlock_mutex:
mutex_unlock(&rwtm->busy);
return ret;
}
static int turris_mox_rwtm_probe(struct platform_device *pdev)
{
struct mox_rwtm *rwtm;
struct device *dev = &pdev->dev;
int ret;
rwtm = devm_kzalloc(dev, sizeof(*rwtm), GFP_KERNEL);
if (!rwtm)
return -ENOMEM;
rwtm->dev = dev;
rwtm->buf = dmam_alloc_coherent(dev, PAGE_SIZE, &rwtm->buf_phys,
GFP_KERNEL);
if (!rwtm->buf)
return -ENOMEM;
ret = mox_kobj_create(rwtm);
if (ret < 0) {
dev_err(dev, "Cannot create turris-mox-rwtm kobject!\n");
return ret;
}
ret = sysfs_create_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs);
if (ret < 0) {
dev_err(dev, "Cannot create sysfs files!\n");
goto put_kobj;
}
platform_set_drvdata(pdev, rwtm);
mutex_init(&rwtm->busy);
rwtm->mbox_client.dev = dev;
rwtm->mbox_client.rx_callback = mox_rwtm_rx_callback;
rwtm->mbox = mbox_request_channel(&rwtm->mbox_client, 0);
if (IS_ERR(rwtm->mbox)) {
ret = PTR_ERR(rwtm->mbox);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Cannot request mailbox channel: %i\n",
ret);
goto remove_files;
}
init_completion(&rwtm->cmd_done);
ret = mox_get_board_info(rwtm);
if (ret < 0)
dev_warn(dev, "Cannot read board information: %i\n", ret);
rwtm->hwrng.name = DRIVER_NAME "_hwrng";
rwtm->hwrng.read = mox_hwrng_read;
rwtm->hwrng.priv = (unsigned long) rwtm;
rwtm->hwrng.quality = 1024;
ret = devm_hwrng_register(dev, &rwtm->hwrng);
if (ret < 0) {
dev_err(dev, "Cannot register HWRNG: %i\n", ret);
goto free_channel;
}
return 0;
free_channel:
mbox_free_channel(rwtm->mbox);
remove_files:
sysfs_remove_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs);
put_kobj:
kobject_put(rwtm_to_kobj(rwtm));
return ret;
}
static int turris_mox_rwtm_remove(struct platform_device *pdev)
{
struct mox_rwtm *rwtm = platform_get_drvdata(pdev);
sysfs_remove_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs);
kobject_put(rwtm_to_kobj(rwtm));
mbox_free_channel(rwtm->mbox);
return 0;
}
static const struct of_device_id turris_mox_rwtm_match[] = {
{ .compatible = "cznic,turris-mox-rwtm", },
{ },
};
MODULE_DEVICE_TABLE(of, turris_mox_rwtm_match);
static struct platform_driver turris_mox_rwtm_driver = {
.probe = turris_mox_rwtm_probe,
.remove = turris_mox_rwtm_remove,
.driver = {
.name = DRIVER_NAME,
.of_match_table = turris_mox_rwtm_match,
},
};
module_platform_driver(turris_mox_rwtm_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Turris Mox rWTM firmware driver");
MODULE_AUTHOR("Marek Behun <marek.behun@nic.cz>");

9
drivers/gpio/Kconfig
View File

@ -1453,6 +1453,15 @@ config GPIO_XRA1403
help
GPIO driver for EXAR XRA1403 16-bit SPI-based GPIO expander.
config GPIO_MOXTET
tristate "Turris Mox Moxtet bus GPIO expander"
depends on MOXTET
help
Say yes here if you are building for the Turris Mox router.
This is the driver needed for configuring the GPIOs via the Moxtet
bus. For example the Mox module with SFP cage needs this driver
so that phylink can use corresponding GPIOs.
endmenu
menu "USB GPIO expanders"

1
drivers/gpio/Makefile
View File

@ -92,6 +92,7 @@ obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
obj-$(CONFIG_GPIO_MLXBF) += gpio-mlxbf.o
obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o
obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o
obj-$(CONFIG_GPIO_MOXTET) += gpio-moxtet.o
obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o
obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o
obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o

179
drivers/gpio/gpio-moxtet.c 100644
View File

@ -0,0 +1,179 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Turris Mox Moxtet GPIO expander
*
* Copyright (C) 2018 Marek Behun <marek.behun@nic.cz>
*/
#include <linux/bitops.h>
#include <linux/gpio/driver.h>
#include <linux/moxtet.h>
#include <linux/module.h>
#define MOXTET_GPIO_NGPIOS 12
#define MOXTET_GPIO_INPUTS 4
struct moxtet_gpio_desc {
u16 in_mask;
u16 out_mask;
};
static const struct moxtet_gpio_desc descs[] = {
[TURRIS_MOX_MODULE_SFP] = {
.in_mask = GENMASK(2, 0),
.out_mask = GENMASK(5, 4),
},
};
struct moxtet_gpio_chip {
struct device *dev;
struct gpio_chip gpio_chip;
const struct moxtet_gpio_desc *desc;
};
static int moxtet_gpio_get_value(struct gpio_chip *gc, unsigned int offset)
{
struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
int ret;
if (chip->desc->in_mask & BIT(offset)) {
ret = moxtet_device_read(chip->dev);
} else if (chip->desc->out_mask & BIT(offset)) {
ret = moxtet_device_written(chip->dev);
if (ret >= 0)
ret <<= MOXTET_GPIO_INPUTS;
} else {
return -EINVAL;
}
if (ret < 0)
return ret;
return !!(ret & BIT(offset));
}
static void moxtet_gpio_set_value(struct gpio_chip *gc, unsigned int offset,
int val)
{
struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
int state;
state = moxtet_device_written(chip->dev);
if (state < 0)
return;
offset -= MOXTET_GPIO_INPUTS;
if (val)
state |= BIT(offset);
else
state &= ~BIT(offset);
moxtet_device_write(chip->dev, state);
}
static int moxtet_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
{
struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
/* All lines are hard wired to be either input or output, not both. */
if (chip->desc->in_mask & BIT(offset))
return 1;
else if (chip->desc->out_mask & BIT(offset))
return 0;
else
return -EINVAL;
}
static int moxtet_gpio_direction_input(struct gpio_chip *gc,
unsigned int offset)
{
struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
if (chip->desc->in_mask & BIT(offset))
return 0;
else if (chip->desc->out_mask & BIT(offset))
return -ENOTSUPP;
else
return -EINVAL;
}
static int moxtet_gpio_direction_output(struct gpio_chip *gc,
unsigned int offset, int val)
{
struct moxtet_gpio_chip *chip = gpiochip_get_data(gc);
if (chip->desc->out_mask & BIT(offset))
moxtet_gpio_set_value(gc, offset, val);
else if (chip->desc->in_mask & BIT(offset))
return -ENOTSUPP;
else
return -EINVAL;
return 0;
}
static int moxtet_gpio_probe(struct device *dev)
{
struct moxtet_gpio_chip *chip;
struct device_node *nc = dev->of_node;
int id;
id = to_moxtet_device(dev)->id;
if (id >= ARRAY_SIZE(descs)) {
dev_err(dev, "%pOF Moxtet device id 0x%x is not supported by gpio-moxtet driver\n",
nc, id);
return -ENOTSUPP;
}
chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
chip->dev = dev;
chip->gpio_chip.parent = dev;
chip->desc = &descs[id];
dev_set_drvdata(dev, chip);
chip->gpio_chip.label = dev_name(dev);
chip->gpio_chip.get_direction = moxtet_gpio_get_direction;
chip->gpio_chip.direction_input = moxtet_gpio_direction_input;
chip->gpio_chip.direction_output = moxtet_gpio_direction_output;
chip->gpio_chip.get = moxtet_gpio_get_value;
chip->gpio_chip.set = moxtet_gpio_set_value;
chip->gpio_chip.base = -1;
chip->gpio_chip.ngpio = MOXTET_GPIO_NGPIOS;
chip->gpio_chip.can_sleep = true;
chip->gpio_chip.owner = THIS_MODULE;
return devm_gpiochip_add_data(dev, &chip->gpio_chip, chip);
}
static const struct of_device_id moxtet_gpio_dt_ids[] = {
{ .compatible = "cznic,moxtet-gpio", },
{},
};
MODULE_DEVICE_TABLE(of, moxtet_gpio_dt_ids);
static const enum turris_mox_module_id moxtet_gpio_module_table[] = {
TURRIS_MOX_MODULE_SFP,
0,
};
static struct moxtet_driver moxtet_gpio_driver = {
.driver = {
.name = "moxtet-gpio",
.of_match_table = moxtet_gpio_dt_ids,
.probe = moxtet_gpio_probe,
},
.id_table = moxtet_gpio_module_table,
};
module_moxtet_driver(moxtet_gpio_driver);
MODULE_AUTHOR("Marek Behun <marek.behun@nic.cz>");
MODULE_DESCRIPTION("Turris Mox Moxtet GPIO expander");
MODULE_LICENSE("GPL v2");

2
drivers/hwmon/scmi-hwmon.c
View File

@ -72,7 +72,7 @@ static int scmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
const struct scmi_handle *h = scmi_sensors->handle;
sensor = *(scmi_sensors->info[type] + channel);
ret = h->sensor_ops->reading_get(h, sensor->id, false, &value);
ret = h->sensor_ops->reading_get(h, sensor->id, &value);
if (ret)
return ret;

1
drivers/net/ethernet/Kconfig
View File

@ -151,7 +151,6 @@ config NET_NETX
To compile this driver as a module, choose M here. The module
will be called netx-eth.
source "drivers/net/ethernet/nuvoton/Kconfig"
source "drivers/net/ethernet/nvidia/Kconfig"
source "drivers/net/ethernet/nxp/Kconfig"
source "drivers/net/ethernet/oki-semi/Kconfig"

1
drivers/net/ethernet/Makefile
View File

@ -65,7 +65,6 @@ obj-$(CONFIG_NET_VENDOR_NETERION) += neterion/
obj-$(CONFIG_NET_VENDOR_NETRONOME) += netronome/
obj-$(CONFIG_NET_VENDOR_NI) += ni/
obj-$(CONFIG_NET_NETX) += netx-eth.o
obj-$(CONFIG_NET_VENDOR_NUVOTON) += nuvoton/
obj-$(CONFIG_NET_VENDOR_NVIDIA) += nvidia/
obj-$(CONFIG_LPC_ENET) += nxp/
obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/

11
drivers/net/ethernet/micrel/Kconfig
View File

@ -6,8 +6,7 @@
config NET_VENDOR_MICREL
bool "Micrel devices"
default y
depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM || \
(ARM && ARCH_KS8695)
depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
@ -18,14 +17,6 @@ config NET_VENDOR_MICREL
if NET_VENDOR_MICREL
config ARM_KS8695_ETHER
tristate "KS8695 Ethernet support"
depends on ARM && ARCH_KS8695
select MII
---help---
If you wish to compile a kernel for the KS8695 and want to
use the internal ethernet then you should answer Y to this.
config KS8842
tristate "Micrel KSZ8841/42 with generic bus interface"
depends on HAS_IOMEM && DMA_ENGINE

1
drivers/net/ethernet/micrel/Makefile
View File

@ -3,7 +3,6 @@
# Makefile for the Micrel network device drivers.
#
obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695net.o
obj-$(CONFIG_KS8842) += ks8842.o
obj-$(CONFIG_KS8851) += ks8851.o
obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o

1632
drivers/net/ethernet/micrel/ks8695net.c
View File

File diff suppressed because it is too large Load Diff

108
drivers/net/ethernet/micrel/ks8695net.h
View File

@ -1,108 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Micrel KS8695 (Centaur) Ethernet.
*
* Copyright 2008 Simtec Electronics
* Daniel Silverstone <dsilvers@simtec.co.uk>
* Vincent Sanders <vince@simtec.co.uk>
*/
#ifndef KS8695NET_H
#define KS8695NET_H
/* Receive descriptor flags */
#define RDES_OWN (1 << 31) /* Ownership */
#define RDES_FS (1 << 30) /* First Descriptor */
#define RDES_LS (1 << 29) /* Last Descriptor */
#define RDES_IPE (1 << 28) /* IP Checksum error */
#define RDES_TCPE (1 << 27) /* TCP Checksum error */
#define RDES_UDPE (1 << 26) /* UDP Checksum error */
#define RDES_ES (1 << 25) /* Error summary */
#define RDES_MF (1 << 24) /* Multicast Frame */
#define RDES_RE (1 << 19) /* MII Error reported */
#define RDES_TL (1 << 18) /* Frame too Long */
#define RDES_RF (1 << 17) /* Runt Frame */
#define RDES_CE (1 << 16) /* CRC error */
#define RDES_FT (1 << 15) /* Frame Type */
#define RDES_FLEN (0x7ff) /* Frame Length */
#define RDES_RER (1 << 25) /* Receive End of Ring */
#define RDES_RBS (0x7ff) /* Receive Buffer Size */
/* Transmit descriptor flags */
#define TDES_OWN (1 << 31) /* Ownership */
#define TDES_IC (1 << 31) /* Interrupt on Completion */
#define TDES_FS (1 << 30) /* First Segment */
#define TDES_LS (1 << 29) /* Last Segment */
#define TDES_IPCKG (1 << 28) /* IP Checksum generate */
#define TDES_TCPCKG (1 << 27) /* TCP Checksum generate */
#define TDES_UDPCKG (1 << 26) /* UDP Checksum generate */
#define TDES_TER (1 << 25) /* Transmit End of Ring */
#define TDES_TBS (0x7ff) /* Transmit Buffer Size */
/*
* Network controller register offsets
*/
#define KS8695_DTXC (0x00) /* DMA Transmit Control */
#define KS8695_DRXC (0x04) /* DMA Receive Control */
#define KS8695_DTSC (0x08) /* DMA Transmit Start Command */
#define KS8695_DRSC (0x0c) /* DMA Receive Start Command */
#define KS8695_TDLB (0x10) /* Transmit Descriptor List
* Base Address
*/
#define KS8695_RDLB (0x14) /* Receive Descriptor List
* Base Address
*/
#define KS8695_MAL (0x18) /* MAC Station Address Low */
#define KS8695_MAH (0x1c) /* MAC Station Address High */
#define KS8695_AAL_(n) (0x80 + ((n)*8)) /* MAC Additional
* Station Address
* (0..15) Low
*/
#define KS8695_AAH_(n) (0x84 + ((n)*8)) /* MAC Additional
* Station Address
* (0..15) High
*/
/* DMA Transmit Control Register */
#define DTXC_TRST (1 << 31) /* Soft Reset */
#define DTXC_TBS (0x3f << 24) /* Transmit Burst Size */
#define DTXC_TUCG (1 << 18) /* Transmit UDP
* Checksum Generate
*/
#define DTXC_TTCG (1 << 17) /* Transmit TCP
* Checksum Generate
*/
#define DTXC_TICG (1 << 16) /* Transmit IP
* Checksum Generate
*/
#define DTXC_TFCE (1 << 9) /* Transmit Flow
* Control Enable
*/
#define DTXC_TLB (1 << 8) /* Loopback mode */
#define DTXC_TEP (1 << 2) /* Transmit Enable Padding */
#define DTXC_TAC (1 << 1) /* Transmit Add CRC */
#define DTXC_TE (1 << 0) /* TX Enable */
/* DMA Receive Control Register */
#define DRXC_RBS (0x3f << 24) /* Receive Burst Size */
#define DRXC_RUCC (1 << 18) /* Receive UDP Checksum check */
#define DRXC_RTCG (1 << 17) /* Receive TCP Checksum check */
#define DRXC_RICG (1 << 16) /* Receive IP Checksum check */
#define DRXC_RFCE (1 << 9) /* Receive Flow Control
* Enable
*/
#define DRXC_RB (1 << 6) /* Receive Broadcast */
#define DRXC_RM (1 << 5) /* Receive Multicast */
#define DRXC_RU (1 << 4) /* Receive Unicast */
#define DRXC_RERR (1 << 3) /* Receive Error Frame */
#define DRXC_RA (1 << 2) /* Receive All */
#define DRXC_RE (1 << 0) /* RX Enable */
/* Additional Station Address High */
#define AAH_E (1 << 31) /* Address Enabled */
#endif /* KS8695NET_H */

29
drivers/net/ethernet/nuvoton/Kconfig
View File

@ -1,29 +0,0 @@
# SPDX-License-Identifier: GPL-2.0-only
#
# Nuvoton network device configuration
#
config NET_VENDOR_NUVOTON
bool "Nuvoton devices"
default y
depends on ARM && ARCH_W90X900
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Nuvoton cards. If you say Y, you will be asked
for your specific card in the following questions.
if NET_VENDOR_NUVOTON
config W90P910_ETH
tristate "Nuvoton w90p910 Ethernet support"
depends on ARM && ARCH_W90X900
select PHYLIB
select MII
---help---
Say Y here if you want to use built-in Ethernet ports
on w90p910 processor.
endif # NET_VENDOR_NUVOTON

6
drivers/net/ethernet/nuvoton/Makefile
View File

@ -1,6 +0,0 @@
# SPDX-License-Identifier: GPL-2.0-only
#
# Makefile for the Nuvoton network device drivers.
#
obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o

1082
drivers/net/ethernet/nuvoton/w90p910_ether.c
View File

File diff suppressed because it is too large Load Diff

13
drivers/reset/Kconfig
View File

@ -116,9 +116,20 @@ config RESET_QCOM_PDC
to control reset signals provided by PDC for Modem, Compute,
Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS.
config RESET_SCMI
tristate "Reset driver controlled via ARM SCMI interface"
depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
default ARM_SCMI_PROTOCOL
help
This driver provides support for reset signal/domains that are
controlled by firmware that implements the SCMI interface.
This driver uses SCMI Message Protocol to interact with the
firmware controlling all the reset signals.
config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST
default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN
default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN || ARC
help
This enables a simple reset controller driver for reset lines that
that can be asserted and deasserted by toggling bits in a contiguous,

1
drivers/reset/Makefile
View File

@ -18,6 +18,7 @@ obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o

12
drivers/reset/reset-imx7.c
View File

@ -169,9 +169,9 @@ static const struct imx7_src_signal imx8mq_src_signals[IMX8MQ_RESET_NUM] = {
[IMX8MQ_RESET_OTG2_PHY_RESET] = { SRC_USBOPHY2_RCR, BIT(0) },
[IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N] = { SRC_MIPIPHY_RCR, BIT(1) },
[IMX8MQ_RESET_MIPI_DSI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(2) },
[IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) },
[IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) },
[IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) },
[IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N] = { SRC_MIPIPHY_RCR, BIT(3) },
[IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N] = { SRC_MIPIPHY_RCR, BIT(4) },
[IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N] = { SRC_MIPIPHY_RCR, BIT(5) },
[IMX8MQ_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR,
BIT(2) | BIT(1) },
[IMX8MQ_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) },
@ -220,9 +220,9 @@ static int imx8mq_reset_set(struct reset_controller_dev *rcdev,
case IMX8MQ_RESET_PCIE_CTRL_APPS_EN:
case IMX8MQ_RESET_PCIE2_CTRL_APPS_EN: /* fallthrough */
case IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N: /* fallthrough */
case IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N: /* fallthrough */
case IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N: /* fallthrough */
case IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N: /* fallthrough */
case IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N: /* fallthrough */
case IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N: /* fallthrough */
case IMX8MQ_RESET_MIPI_DSI_RESET_N: /* fallthrough */
case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N: /* fallthrough */
value = assert ? 0 : bit;

51
drivers/reset/reset-meson.c
View File

@ -1,58 +1,9 @@
// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
/*
* Amlogic Meson Reset Controller driver
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright (c) 2016 BayLibre, SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
* The full GNU General Public License is included in this distribution
* in the file called COPYING.
*
* BSD LICENSE
*
* Copyright (c) 2016 BayLibre, SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/err.h>
#include <linux/init.h>

124
drivers/reset/reset-scmi.c 100644
View File

@ -0,0 +1,124 @@
// SPDX-License-Identifier: GPL-2.0
/*
* ARM System Control and Management Interface (ARM SCMI) reset driver
*
* Copyright (C) 2019 ARM Ltd.
*/
#include <linux/module.h>
#include <linux/of.h>
#include <linux/device.h>
#include <linux/reset-controller.h>
#include <linux/scmi_protocol.h>
/**
* struct scmi_reset_data - reset controller information structure
* @rcdev: reset controller entity
* @handle: ARM SCMI handle used for communication with system controller
*/
struct scmi_reset_data {
struct reset_controller_dev rcdev;
const struct scmi_handle *handle;
};
#define to_scmi_reset_data(p) container_of((p), struct scmi_reset_data, rcdev)
#define to_scmi_handle(p) (to_scmi_reset_data(p)->handle)
/**
* scmi_reset_assert() - assert device reset
* @rcdev: reset controller entity
* @id: ID of the reset to be asserted
*
* This function implements the reset driver op to assert a device's reset
* using the ARM SCMI protocol.
*
* Return: 0 for successful request, else a corresponding error value
*/
static int
scmi_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
{
const struct scmi_handle *handle = to_scmi_handle(rcdev);
return handle->reset_ops->assert(handle, id);
}
/**
* scmi_reset_deassert() - deassert device reset
* @rcdev: reset controller entity
* @id: ID of the reset to be deasserted
*
* This function implements the reset driver op to deassert a device's reset
* using the ARM SCMI protocol.
*
* Return: 0 for successful request, else a corresponding error value
*/
static int
scmi_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
{
const struct scmi_handle *handle = to_scmi_handle(rcdev);
return handle->reset_ops->deassert(handle, id);
}
/**
* scmi_reset_reset() - reset the device
* @rcdev: reset controller entity
* @id: ID of the reset signal to be reset(assert + deassert)
*
* This function implements the reset driver op to trigger a device's
* reset signal using the ARM SCMI protocol.
*
* Return: 0 for successful request, else a corresponding error value
*/
static int
scmi_reset_reset(struct reset_controller_dev *rcdev, unsigned long id)
{
const struct scmi_handle *handle = to_scmi_handle(rcdev);
return handle->reset_ops->reset(handle, id);
}
static const struct reset_control_ops scmi_reset_ops = {
.assert = scmi_reset_assert,
.deassert = scmi_reset_deassert,
.reset = scmi_reset_reset,
};
static int scmi_reset_probe(struct scmi_device *sdev)
{
struct scmi_reset_data *data;
struct device *dev = &sdev->dev;
struct device_node *np = dev->of_node;
const struct scmi_handle *handle = sdev->handle;
if (!handle || !handle->reset_ops)
return -ENODEV;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->rcdev.ops = &scmi_reset_ops;
data->rcdev.owner = THIS_MODULE;
data->rcdev.of_node = np;
data->rcdev.nr_resets = handle->reset_ops->num_domains_get(handle);
return devm_reset_controller_register(dev, &data->rcdev);
}
static const struct scmi_device_id scmi_id_table[] = {
{ SCMI_PROTOCOL_RESET },
{ },
};
MODULE_DEVICE_TABLE(scmi, scmi_id_table);
static struct scmi_driver scmi_reset_driver = {
.name = "scmi-reset",
.probe = scmi_reset_probe,
.id_table = scmi_id_table,
};
module_scmi_driver(scmi_reset_driver);
MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
MODULE_DESCRIPTION("ARM SCMI reset controller driver");
MODULE_LICENSE("GPL v2");

3
drivers/reset/reset-simple.c
View File

@ -127,6 +127,9 @@ static const struct of_device_id reset_simple_dt_ids[] = {
{ .compatible = "aspeed,ast2500-lpc-reset" },
{ .compatible = "bitmain,bm1880-reset",
.data = &reset_simple_active_low },
{ .compatible = "snps,dw-high-reset" },
{ .compatible = "snps,dw-low-reset",
.data = &reset_simple_active_low },
{ /* sentinel */ },
};

11
drivers/soc/amlogic/Kconfig
View File

@ -37,6 +37,17 @@ config MESON_GX_PM_DOMAINS
Say yes to expose Amlogic Meson GX Power Domains as
Generic Power Domains.
config MESON_EE_PM_DOMAINS
bool "Amlogic Meson Everything-Else Power Domains driver"
depends on ARCH_MESON || COMPILE_TEST
depends on PM && OF
default ARCH_MESON
select PM_GENERIC_DOMAINS
select PM_GENERIC_DOMAINS_OF
help
Say yes to expose Amlogic Meson Everything-Else Power Domains as
Generic Power Domains.
config MESON_MX_SOCINFO
bool "Amlogic Meson MX SoC Information driver"
depends on ARCH_MESON || COMPILE_TEST

1
drivers/soc/amlogic/Makefile
View File

@ -4,3 +4,4 @@ obj-$(CONFIG_MESON_CLK_MEASURE) += meson-clk-measure.o
obj-$(CONFIG_MESON_GX_SOCINFO) += meson-gx-socinfo.o
obj-$(CONFIG_MESON_GX_PM_DOMAINS) += meson-gx-pwrc-vpu.o
obj-$(CONFIG_MESON_MX_SOCINFO) += meson-mx-socinfo.o
obj-$(CONFIG_MESON_EE_PM_DOMAINS) += meson-ee-pwrc.o

148
drivers/soc/amlogic/meson-clk-measure.c
View File

@ -11,6 +11,8 @@
#include <linux/debugfs.h>
#include <linux/regmap.h>
static DEFINE_MUTEX(measure_lock);
#define MSR_CLK_DUTY 0x0
#define MSR_CLK_REG0 0x4
#define MSR_CLK_REG1 0x8
@ -322,6 +324,8 @@ static struct meson_msr_id clk_msr_g12a[CLK_MSR_MAX] = {
CLK_MSR_ID(84, "co_tx"),
CLK_MSR_ID(89, "hdmi_todig"),
CLK_MSR_ID(90, "hdmitx_sys"),
CLK_MSR_ID(91, "sys_cpub_div16"),
CLK_MSR_ID(92, "sys_pll_cpub_div16"),
CLK_MSR_ID(94, "eth_phy_rx"),
CLK_MSR_ID(95, "eth_phy_pll"),
CLK_MSR_ID(96, "vpu_b"),
@ -353,6 +357,136 @@ static struct meson_msr_id clk_msr_g12a[CLK_MSR_MAX] = {
CLK_MSR_ID(122, "audio_pdm_dclk"),
};
static struct meson_msr_id clk_msr_sm1[CLK_MSR_MAX] = {
CLK_MSR_ID(0, "ring_osc_out_ee_0"),
CLK_MSR_ID(1, "ring_osc_out_ee_1"),
CLK_MSR_ID(2, "ring_osc_out_ee_2"),
CLK_MSR_ID(3, "ring_osc_out_ee_3"),
CLK_MSR_ID(4, "gp0_pll"),
CLK_MSR_ID(5, "gp1_pll"),
CLK_MSR_ID(6, "enci"),
CLK_MSR_ID(7, "clk81"),
CLK_MSR_ID(8, "encp"),
CLK_MSR_ID(9, "encl"),
CLK_MSR_ID(10, "vdac"),
CLK_MSR_ID(11, "eth_tx"),
CLK_MSR_ID(12, "hifi_pll"),
CLK_MSR_ID(13, "mod_tcon"),
CLK_MSR_ID(14, "fec_0"),
CLK_MSR_ID(15, "fec_1"),
CLK_MSR_ID(16, "fec_2"),
CLK_MSR_ID(17, "sys_pll_div16"),
CLK_MSR_ID(18, "sys_cpu_div16"),
CLK_MSR_ID(19, "lcd_an_ph2"),
CLK_MSR_ID(20, "rtc_osc_out"),
CLK_MSR_ID(21, "lcd_an_ph3"),
CLK_MSR_ID(22, "eth_phy_ref"),
CLK_MSR_ID(23, "mpll_50m"),
CLK_MSR_ID(24, "eth_125m"),
CLK_MSR_ID(25, "eth_rmii"),
CLK_MSR_ID(26, "sc_int"),
CLK_MSR_ID(27, "in_mac"),
CLK_MSR_ID(28, "sar_adc"),
CLK_MSR_ID(29, "pcie_inp"),
CLK_MSR_ID(30, "pcie_inn"),
CLK_MSR_ID(31, "mpll_test_out"),
CLK_MSR_ID(32, "vdec"),
CLK_MSR_ID(34, "eth_mpll_50m"),
CLK_MSR_ID(35, "mali"),
CLK_MSR_ID(36, "hdmi_tx_pixel"),
CLK_MSR_ID(37, "cdac"),
CLK_MSR_ID(38, "vdin_meas"),
CLK_MSR_ID(39, "bt656"),
CLK_MSR_ID(40, "arm_ring_osc_out_4"),
CLK_MSR_ID(41, "eth_rx_or_rmii"),
CLK_MSR_ID(42, "mp0_out"),
CLK_MSR_ID(43, "fclk_div5"),
CLK_MSR_ID(44, "pwm_b"),
CLK_MSR_ID(45, "pwm_a"),
CLK_MSR_ID(46, "vpu"),
CLK_MSR_ID(47, "ddr_dpll_pt"),
CLK_MSR_ID(48, "mp1_out"),
CLK_MSR_ID(49, "mp2_out"),
CLK_MSR_ID(50, "mp3_out"),
CLK_MSR_ID(51, "sd_emmc_c"),
CLK_MSR_ID(52, "sd_emmc_b"),
CLK_MSR_ID(53, "sd_emmc_a"),
CLK_MSR_ID(54, "vpu_clkc"),
CLK_MSR_ID(55, "vid_pll_div_out"),
CLK_MSR_ID(56, "wave420l_a"),
CLK_MSR_ID(57, "wave420l_c"),
CLK_MSR_ID(58, "wave420l_b"),
CLK_MSR_ID(59, "hcodec"),
CLK_MSR_ID(60, "arm_ring_osc_out_5"),
CLK_MSR_ID(61, "gpio_msr"),
CLK_MSR_ID(62, "hevcb"),
CLK_MSR_ID(63, "dsi_meas"),
CLK_MSR_ID(64, "spicc_1"),
CLK_MSR_ID(65, "spicc_0"),
CLK_MSR_ID(66, "vid_lock"),
CLK_MSR_ID(67, "dsi_phy"),
CLK_MSR_ID(68, "hdcp22_esm"),
CLK_MSR_ID(69, "hdcp22_skp"),
CLK_MSR_ID(70, "pwm_f"),
CLK_MSR_ID(71, "pwm_e"),
CLK_MSR_ID(72, "pwm_d"),
CLK_MSR_ID(73, "pwm_c"),
CLK_MSR_ID(74, "arm_ring_osc_out_6"),
CLK_MSR_ID(75, "hevcf"),
CLK_MSR_ID(76, "arm_ring_osc_out_7"),
CLK_MSR_ID(77, "rng_ring_osc_0"),
CLK_MSR_ID(78, "rng_ring_osc_1"),
CLK_MSR_ID(79, "rng_ring_osc_2"),
CLK_MSR_ID(80, "rng_ring_osc_3"),
CLK_MSR_ID(81, "vapb"),
CLK_MSR_ID(82, "ge2d"),
CLK_MSR_ID(83, "co_rx"),
CLK_MSR_ID(84, "co_tx"),
CLK_MSR_ID(85, "arm_ring_osc_out_8"),
CLK_MSR_ID(86, "arm_ring_osc_out_9"),
CLK_MSR_ID(87, "mipi_dsi_phy"),
CLK_MSR_ID(88, "cis2_adapt"),
CLK_MSR_ID(89, "hdmi_todig"),
CLK_MSR_ID(90, "hdmitx_sys"),
CLK_MSR_ID(91, "nna_core"),
CLK_MSR_ID(92, "nna_axi"),
CLK_MSR_ID(93, "vad"),
CLK_MSR_ID(94, "eth_phy_rx"),
CLK_MSR_ID(95, "eth_phy_pll"),
CLK_MSR_ID(96, "vpu_b"),
CLK_MSR_ID(97, "cpu_b_tmp"),
CLK_MSR_ID(98, "ts"),
CLK_MSR_ID(99, "arm_ring_osc_out_10"),
CLK_MSR_ID(100, "arm_ring_osc_out_11"),
CLK_MSR_ID(101, "arm_ring_osc_out_12"),
CLK_MSR_ID(102, "arm_ring_osc_out_13"),
CLK_MSR_ID(103, "arm_ring_osc_out_14"),
CLK_MSR_ID(104, "arm_ring_osc_out_15"),
CLK_MSR_ID(105, "arm_ring_osc_out_16"),
CLK_MSR_ID(106, "ephy_test"),
CLK_MSR_ID(107, "au_dac_g128x"),
CLK_MSR_ID(108, "audio_locker_out"),
CLK_MSR_ID(109, "audio_locker_in"),
CLK_MSR_ID(110, "audio_tdmout_c_sclk"),
CLK_MSR_ID(111, "audio_tdmout_b_sclk"),
CLK_MSR_ID(112, "audio_tdmout_a_sclk"),
CLK_MSR_ID(113, "audio_tdmin_lb_sclk"),
CLK_MSR_ID(114, "audio_tdmin_c_sclk"),
CLK_MSR_ID(115, "audio_tdmin_b_sclk"),
CLK_MSR_ID(116, "audio_tdmin_a_sclk"),
CLK_MSR_ID(117, "audio_resample"),
CLK_MSR_ID(118, "audio_pdm_sys"),
CLK_MSR_ID(119, "audio_spdifout_b"),
CLK_MSR_ID(120, "audio_spdifout"),
CLK_MSR_ID(121, "audio_spdifin"),
CLK_MSR_ID(122, "audio_pdm_dclk"),
CLK_MSR_ID(123, "audio_resampled"),
CLK_MSR_ID(124, "earcrx_pll"),
CLK_MSR_ID(125, "earcrx_pll_test"),
CLK_MSR_ID(126, "csi_phy0"),
CLK_MSR_ID(127, "csi2_data"),
};
static int meson_measure_id(struct meson_msr_id *clk_msr_id,
unsigned int duration)
{
@ -360,6 +494,10 @@ static int meson_measure_id(struct meson_msr_id *clk_msr_id,
unsigned int val;
int ret;
ret = mutex_lock_interruptible(&measure_lock);
if (ret)
return ret;
regmap_write(priv->regmap, MSR_CLK_REG0, 0);
/* Set measurement duration */
@ -377,8 +515,10 @@ static int meson_measure_id(struct meson_msr_id *clk_msr_id,
ret = regmap_read_poll_timeout(priv->regmap, MSR_CLK_REG0,
val, !(val & MSR_BUSY), 10, 10000);
if (ret)
if (ret) {
mutex_unlock(&measure_lock);
return ret;
}
/* Disable */
regmap_update_bits(priv->regmap, MSR_CLK_REG0, MSR_ENABLE, 0);
@ -386,6 +526,8 @@ static int meson_measure_id(struct meson_msr_id *clk_msr_id,
/* Get the value in multiple of gate time counts */
regmap_read(priv->regmap, MSR_CLK_REG2, &val);
mutex_unlock(&measure_lock);
if (val >= MSR_VAL_MASK)
return -EINVAL;
@ -533,6 +675,10 @@ static const struct of_device_id meson_msr_match_table[] = {
.compatible = "amlogic,meson-g12a-clk-measure",
.data = (void *)clk_msr_g12a,
},
{
.compatible = "amlogic,meson-sm1-clk-measure",
.data = (void *)clk_msr_sm1,
},
{ /* sentinel */ }
};

492
drivers/soc/amlogic/meson-ee-pwrc.c 100644
View File

@ -0,0 +1,492 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2019 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
*/
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/bitfield.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/of_device.h>
#include <linux/reset-controller.h>
#include <linux/reset.h>
#include <linux/clk.h>
#include <dt-bindings/power/meson-g12a-power.h>
#include <dt-bindings/power/meson-sm1-power.h>
/* AO Offsets */
#define AO_RTI_GEN_PWR_SLEEP0 (0x3a << 2)
#define AO_RTI_GEN_PWR_ISO0 (0x3b << 2)
/* HHI Offsets */
#define HHI_MEM_PD_REG0 (0x40 << 2)
#define HHI_VPU_MEM_PD_REG0 (0x41 << 2)
#define HHI_VPU_MEM_PD_REG1 (0x42 << 2)
#define HHI_VPU_MEM_PD_REG3 (0x43 << 2)
#define HHI_VPU_MEM_PD_REG4 (0x44 << 2)
#define HHI_AUDIO_MEM_PD_REG0 (0x45 << 2)
#define HHI_NANOQ_MEM_PD_REG0 (0x46 << 2)
#define HHI_NANOQ_MEM_PD_REG1 (0x47 << 2)
#define HHI_VPU_MEM_PD_REG2 (0x4d << 2)
struct meson_ee_pwrc;
struct meson_ee_pwrc_domain;
struct meson_ee_pwrc_mem_domain {
unsigned int reg;
unsigned int mask;
};
struct meson_ee_pwrc_top_domain {
unsigned int sleep_reg;
unsigned int sleep_mask;
unsigned int iso_reg;
unsigned int iso_mask;
};
struct meson_ee_pwrc_domain_desc {
char *name;
unsigned int reset_names_count;
unsigned int clk_names_count;
struct meson_ee_pwrc_top_domain *top_pd;
unsigned int mem_pd_count;
struct meson_ee_pwrc_mem_domain *mem_pd;
bool (*get_power)(struct meson_ee_pwrc_domain *pwrc_domain);
};
struct meson_ee_pwrc_domain_data {
unsigned int count;
struct meson_ee_pwrc_domain_desc *domains;
};
/* TOP Power Domains */
static struct meson_ee_pwrc_top_domain g12a_pwrc_vpu = {
.sleep_reg = AO_RTI_GEN_PWR_SLEEP0,
.sleep_mask = BIT(8),
.iso_reg = AO_RTI_GEN_PWR_SLEEP0,
.iso_mask = BIT(9),
};
#define SM1_EE_PD(__bit) \
{ \
.sleep_reg = AO_RTI_GEN_PWR_SLEEP0, \
.sleep_mask = BIT(__bit), \
.iso_reg = AO_RTI_GEN_PWR_ISO0, \
.iso_mask = BIT(__bit), \
}
static struct meson_ee_pwrc_top_domain sm1_pwrc_vpu = SM1_EE_PD(8);
static struct meson_ee_pwrc_top_domain sm1_pwrc_nna = SM1_EE_PD(16);
static struct meson_ee_pwrc_top_domain sm1_pwrc_usb = SM1_EE_PD(17);
static struct meson_ee_pwrc_top_domain sm1_pwrc_pci = SM1_EE_PD(18);
static struct meson_ee_pwrc_top_domain sm1_pwrc_ge2d = SM1_EE_PD(19);
/* Memory PD Domains */
#define VPU_MEMPD(__reg) \
{ __reg, GENMASK(1, 0) }, \
{ __reg, GENMASK(3, 2) }, \
{ __reg, GENMASK(5, 4) }, \
{ __reg, GENMASK(7, 6) }, \
{ __reg, GENMASK(9, 8) }, \
{ __reg, GENMASK(11, 10) }, \
{ __reg, GENMASK(13, 12) }, \
{ __reg, GENMASK(15, 14) }, \
{ __reg, GENMASK(17, 16) }, \
{ __reg, GENMASK(19, 18) }, \
{ __reg, GENMASK(21, 20) }, \
{ __reg, GENMASK(23, 22) }, \
{ __reg, GENMASK(25, 24) }, \
{ __reg, GENMASK(27, 26) }, \
{ __reg, GENMASK(29, 28) }, \
{ __reg, GENMASK(31, 30) }
#define VPU_HHI_MEMPD(__reg) \
{ __reg, BIT(8) }, \
{ __reg, BIT(9) }, \
{ __reg, BIT(10) }, \
{ __reg, BIT(11) }, \
{ __reg, BIT(12) }, \
{ __reg, BIT(13) }, \
{ __reg, BIT(14) }, \
{ __reg, BIT(15) }
static struct meson_ee_pwrc_mem_domain g12a_pwrc_mem_vpu[] = {
VPU_MEMPD(HHI_VPU_MEM_PD_REG0),
VPU_MEMPD(HHI_VPU_MEM_PD_REG1),
VPU_MEMPD(HHI_VPU_MEM_PD_REG2),
VPU_HHI_MEMPD(HHI_MEM_PD_REG0),
};
static struct meson_ee_pwrc_mem_domain g12a_pwrc_mem_eth[] = {
{ HHI_MEM_PD_REG0, GENMASK(3, 2) },
};
static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_vpu[] = {
VPU_MEMPD(HHI_VPU_MEM_PD_REG0),
VPU_MEMPD(HHI_VPU_MEM_PD_REG1),
VPU_MEMPD(HHI_VPU_MEM_PD_REG2),
VPU_MEMPD(HHI_VPU_MEM_PD_REG3),
{ HHI_VPU_MEM_PD_REG4, GENMASK(1, 0) },
{ HHI_VPU_MEM_PD_REG4, GENMASK(3, 2) },
{ HHI_VPU_MEM_PD_REG4, GENMASK(5, 4) },
{ HHI_VPU_MEM_PD_REG4, GENMASK(7, 6) },
VPU_HHI_MEMPD(HHI_MEM_PD_REG0),
};
static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_nna[] = {
{ HHI_NANOQ_MEM_PD_REG0, 0xff },
{ HHI_NANOQ_MEM_PD_REG1, 0xff },
};
static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_usb[] = {
{ HHI_MEM_PD_REG0, GENMASK(31, 30) },
};
static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_pcie[] = {
{ HHI_MEM_PD_REG0, GENMASK(29, 26) },
};
static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_ge2d[] = {
{ HHI_MEM_PD_REG0, GENMASK(25, 18) },
};
static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_audio[] = {
{ HHI_MEM_PD_REG0, GENMASK(5, 4) },
{ HHI_AUDIO_MEM_PD_REG0, GENMASK(1, 0) },
{ HHI_AUDIO_MEM_PD_REG0, GENMASK(3, 2) },
{ HHI_AUDIO_MEM_PD_REG0, GENMASK(5, 4) },
{ HHI_AUDIO_MEM_PD_REG0, GENMASK(7, 6) },
{ HHI_AUDIO_MEM_PD_REG0, GENMASK(13, 12) },
{ HHI_AUDIO_MEM_PD_REG0, GENMASK(15, 14) },
{ HHI_AUDIO_MEM_PD_REG0, GENMASK(17, 16) },
{ HHI_AUDIO_MEM_PD_REG0, GENMASK(19, 18) },
{ HHI_AUDIO_MEM_PD_REG0, GENMASK(21, 20) },
{ HHI_AUDIO_MEM_PD_REG0, GENMASK(23, 22) },
{ HHI_AUDIO_MEM_PD_REG0, GENMASK(25, 24) },
{ HHI_AUDIO_MEM_PD_REG0, GENMASK(27, 26) },
};
#define VPU_PD(__name, __top_pd, __mem, __get_power, __resets, __clks) \
{ \
.name = __name, \
.reset_names_count = __resets, \
.clk_names_count = __clks, \
.top_pd = __top_pd, \
.mem_pd_count = ARRAY_SIZE(__mem), \
.mem_pd = __mem, \
.get_power = __get_power, \
}
#define TOP_PD(__name, __top_pd, __mem, __get_power) \
{ \
.name = __name, \
.top_pd = __top_pd, \
.mem_pd_count = ARRAY_SIZE(__mem), \
.mem_pd = __mem, \
.get_power = __get_power, \
}
#define MEM_PD(__name, __mem) \
TOP_PD(__name, NULL, __mem, NULL)
static bool pwrc_ee_get_power(struct meson_ee_pwrc_domain *pwrc_domain);
static struct meson_ee_pwrc_domain_desc g12a_pwrc_domains[] = {
[PWRC_G12A_VPU_ID] = VPU_PD("VPU", &g12a_pwrc_vpu, g12a_pwrc_mem_vpu,
pwrc_ee_get_power, 11, 2),
[PWRC_G12A_ETH_ID] = MEM_PD("ETH", g12a_pwrc_mem_eth),
};
static struct meson_ee_pwrc_domain_desc sm1_pwrc_domains[] = {
[PWRC_SM1_VPU_ID] = VPU_PD("VPU", &sm1_pwrc_vpu, sm1_pwrc_mem_vpu,
pwrc_ee_get_power, 11, 2),
[PWRC_SM1_NNA_ID] = TOP_PD("NNA", &sm1_pwrc_nna, sm1_pwrc_mem_nna,
pwrc_ee_get_power),
[PWRC_SM1_USB_ID] = TOP_PD("USB", &sm1_pwrc_usb, sm1_pwrc_mem_usb,
pwrc_ee_get_power),
[PWRC_SM1_PCIE_ID] = TOP_PD("PCI", &sm1_pwrc_pci, sm1_pwrc_mem_pcie,
pwrc_ee_get_power),
[PWRC_SM1_GE2D_ID] = TOP_PD("GE2D", &sm1_pwrc_ge2d, sm1_pwrc_mem_ge2d,
pwrc_ee_get_power),
[PWRC_SM1_AUDIO_ID] = MEM_PD("AUDIO", sm1_pwrc_mem_audio),
[PWRC_SM1_ETH_ID] = MEM_PD("ETH", g12a_pwrc_mem_eth),
};
struct meson_ee_pwrc_domain {
struct generic_pm_domain base;
bool enabled;
struct meson_ee_pwrc *pwrc;
struct meson_ee_pwrc_domain_desc desc;
struct clk_bulk_data *clks;
int num_clks;
struct reset_control *rstc;
int num_rstc;
};
struct meson_ee_pwrc {
struct regmap *regmap_ao;
struct regmap *regmap_hhi;
struct meson_ee_pwrc_domain *domains;
struct genpd_onecell_data xlate;
};
static bool pwrc_ee_get_power(struct meson_ee_pwrc_domain *pwrc_domain)
{
u32 reg;
regmap_read(pwrc_domain->pwrc->regmap_ao,
pwrc_domain->desc.top_pd->sleep_reg, &reg);
return (reg & pwrc_domain->desc.top_pd->sleep_mask);
}
static int meson_ee_pwrc_off(struct generic_pm_domain *domain)
{
struct meson_ee_pwrc_domain *pwrc_domain =
container_of(domain, struct meson_ee_pwrc_domain, base);
int i;
if (pwrc_domain->desc.top_pd)
regmap_update_bits(pwrc_domain->pwrc->regmap_ao,
pwrc_domain->desc.top_pd->sleep_reg,
pwrc_domain->desc.top_pd->sleep_mask,
pwrc_domain->desc.top_pd->sleep_mask);
udelay(20);
for (i = 0 ; i < pwrc_domain->desc.mem_pd_count ; ++i)
regmap_update_bits(pwrc_domain->pwrc->regmap_hhi,
pwrc_domain->desc.mem_pd[i].reg,
pwrc_domain->desc.mem_pd[i].mask,
pwrc_domain->desc.mem_pd[i].mask);
udelay(20);
if (pwrc_domain->desc.top_pd)
regmap_update_bits(pwrc_domain->pwrc->regmap_ao,
pwrc_domain->desc.top_pd->iso_reg,
pwrc_domain->desc.top_pd->iso_mask,
pwrc_domain->desc.top_pd->iso_mask);
if (pwrc_domain->num_clks) {
msleep(20);
clk_bulk_disable_unprepare(pwrc_domain->num_clks,
pwrc_domain->clks);
}
return 0;
}
static int meson_ee_pwrc_on(struct generic_pm_domain *domain)
{
struct meson_ee_pwrc_domain *pwrc_domain =
container_of(domain, struct meson_ee_pwrc_domain, base);
int i, ret;
if (pwrc_domain->desc.top_pd)
regmap_update_bits(pwrc_domain->pwrc->regmap_ao,
pwrc_domain->desc.top_pd->sleep_reg,
pwrc_domain->desc.top_pd->sleep_mask, 0);
udelay(20);
for (i = 0 ; i < pwrc_domain->desc.mem_pd_count ; ++i)
regmap_update_bits(pwrc_domain->pwrc->regmap_hhi,
pwrc_domain->desc.mem_pd[i].reg,
pwrc_domain->desc.mem_pd[i].mask, 0);
udelay(20);
ret = reset_control_assert(pwrc_domain->rstc);
if (ret)
return ret;
if (pwrc_domain->desc.top_pd)
regmap_update_bits(pwrc_domain->pwrc->regmap_ao,
pwrc_domain->desc.top_pd->iso_reg,
pwrc_domain->desc.top_pd->iso_mask, 0);
ret = reset_control_deassert(pwrc_domain->rstc);
if (ret)
return ret;
return clk_bulk_prepare_enable(pwrc_domain->num_clks,
pwrc_domain->clks);
}
static int meson_ee_pwrc_init_domain(struct platform_device *pdev,
struct meson_ee_pwrc *pwrc,
struct meson_ee_pwrc_domain *dom)
{
dom->pwrc = pwrc;
dom->num_rstc = dom->desc.reset_names_count;
dom->num_clks = dom->desc.clk_names_count;
if (dom->num_rstc) {
int count = reset_control_get_count(&pdev->dev);
if (count != dom->num_rstc)
dev_warn(&pdev->dev, "Invalid resets count %d for domain %s\n",
count, dom->desc.name);
dom->rstc = devm_reset_control_array_get(&pdev->dev, false,
false);
if (IS_ERR(dom->rstc))
return PTR_ERR(dom->rstc);
}
if (dom->num_clks) {
int ret = devm_clk_bulk_get_all(&pdev->dev, &dom->clks);
if (ret < 0)
return ret;
if (dom->num_clks != ret) {
dev_warn(&pdev->dev, "Invalid clocks count %d for domain %s\n",
ret, dom->desc.name);
dom->num_clks = ret;
}
}
dom->base.name = dom->desc.name;
dom->base.power_on = meson_ee_pwrc_on;
dom->base.power_off = meson_ee_pwrc_off;
/*
* TOFIX: This is a special case for the VPU power domain, which can
* be enabled previously by the bootloader. In this case the VPU
* pipeline may be functional but no driver maybe never attach
* to this power domain, and if the domain is disabled it could
* cause system errors. This is why the pm_domain_always_on_gov
* is used here.
* For the same reason, the clocks should be enabled in case
* we need to power the domain off, otherwise the internal clocks
* prepare/enable counters won't be in sync.
*/
if (dom->num_clks && dom->desc.get_power && !dom->desc.get_power(dom)) {
int ret = clk_bulk_prepare_enable(dom->num_clks, dom->clks);
if (ret)
return ret;
pm_genpd_init(&dom->base, &pm_domain_always_on_gov, false);
} else
pm_genpd_init(&dom->base, NULL,
(dom->desc.get_power ?
dom->desc.get_power(dom) : true));
return 0;
}
static int meson_ee_pwrc_probe(struct platform_device *pdev)
{
const struct meson_ee_pwrc_domain_data *match;
struct regmap *regmap_ao, *regmap_hhi;
struct meson_ee_pwrc *pwrc;
int i, ret;
match = of_device_get_match_data(&pdev->dev);
if (!match) {
dev_err(&pdev->dev, "failed to get match data\n");
return -ENODEV;
}
pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
if (!pwrc)
return -ENOMEM;
pwrc->xlate.domains = devm_kcalloc(&pdev->dev, match->count,
sizeof(*pwrc->xlate.domains),
GFP_KERNEL);
if (!pwrc->xlate.domains)
return -ENOMEM;
pwrc->domains = devm_kcalloc(&pdev->dev, match->count,
sizeof(*pwrc->domains), GFP_KERNEL);
if (!pwrc->domains)
return -ENOMEM;
pwrc->xlate.num_domains = match->count;
regmap_hhi = syscon_node_to_regmap(of_get_parent(pdev->dev.of_node));
if (IS_ERR(regmap_hhi)) {
dev_err(&pdev->dev, "failed to get HHI regmap\n");
return PTR_ERR(regmap_hhi);
}
regmap_ao = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
"amlogic,ao-sysctrl");
if (IS_ERR(regmap_ao)) {
dev_err(&pdev->dev, "failed to get AO regmap\n");
return PTR_ERR(regmap_ao);
}
pwrc->regmap_ao = regmap_ao;
pwrc->regmap_hhi = regmap_hhi;
platform_set_drvdata(pdev, pwrc);
for (i = 0 ; i < match->count ; ++i) {
struct meson_ee_pwrc_domain *dom = &pwrc->domains[i];
memcpy(&dom->desc, &match->domains[i], sizeof(dom->desc));
ret = meson_ee_pwrc_init_domain(pdev, pwrc, dom);
if (ret)
return ret;
pwrc->xlate.domains[i] = &dom->base;
}
of_genpd_add_provider_onecell(pdev->dev.of_node, &pwrc->xlate);
return 0;
}
static void meson_ee_pwrc_shutdown(struct platform_device *pdev)
{
struct meson_ee_pwrc *pwrc = platform_get_drvdata(pdev);
int i;
for (i = 0 ; i < pwrc->xlate.num_domains ; ++i) {
struct meson_ee_pwrc_domain *dom = &pwrc->domains[i];
if (dom->desc.get_power && !dom->desc.get_power(dom))
meson_ee_pwrc_off(&dom->base);
}
}
static struct meson_ee_pwrc_domain_data meson_ee_g12a_pwrc_data = {
.count = ARRAY_SIZE(g12a_pwrc_domains),
.domains = g12a_pwrc_domains,
};
static struct meson_ee_pwrc_domain_data meson_ee_sm1_pwrc_data = {
.count = ARRAY_SIZE(sm1_pwrc_domains),
.domains = sm1_pwrc_domains,
};
static const struct of_device_id meson_ee_pwrc_match_table[] = {
{
.compatible = "amlogic,meson-g12a-pwrc",
.data = &meson_ee_g12a_pwrc_data,
},
{
.compatible = "amlogic,meson-sm1-pwrc",
.data = &meson_ee_sm1_pwrc_data,
},
{ /* sentinel */ }
};
static struct platform_driver meson_ee_pwrc_driver = {
.probe = meson_ee_pwrc_probe,
.shutdown = meson_ee_pwrc_shutdown,
.driver = {
.name = "meson_ee_pwrc",
.of_match_table = meson_ee_pwrc_match_table,
},
};
builtin_platform_driver(meson_ee_pwrc_driver);

7
drivers/soc/amlogic/meson-gx-socinfo.c
View File

@ -39,6 +39,7 @@ static const struct meson_gx_soc_id {
{ "TXHD", 0x27 },
{ "G12A", 0x28 },
{ "G12B", 0x29 },
{ "SM1", 0x2b },
};
static const struct meson_gx_package_id {
@ -65,6 +66,8 @@ static const struct meson_gx_package_id {
{ "S905D2", 0x28, 0x10, 0xf0 },
{ "S905X2", 0x28, 0x40, 0xf0 },
{ "S922X", 0x29, 0x40, 0xf0 },
{ "A311D", 0x29, 0x10, 0xf0 },
{ "S905X3", 0x2b, 0x5, 0xf },
};
static inline unsigned int socinfo_to_major(u32 socinfo)
@ -138,8 +141,10 @@ static int __init meson_gx_socinfo_init(void)
}
/* check if chip-id is available */
if (!of_property_read_bool(np, "amlogic,has-chip-id"))
if (!of_property_read_bool(np, "amlogic,has-chip-id")) {
of_node_put(np);
return -ENODEV;
}
/* node should be a syscon */
regmap = syscon_node_to_regmap(np);

2
drivers/soc/fsl/dpaa2-console.c
View File

@ -73,7 +73,7 @@ static u64 get_mc_fw_base_address(void)
mcfbaregs = ioremap(mc_base_addr.start, resource_size(&mc_base_addr));
if (!mcfbaregs) {
pr_err("could not map MC Firmaware Base registers\n");
pr_err("could not map MC Firmware Base registers\n");
return 0;
}

2
drivers/soc/fsl/dpio/dpio-service.c
View File

@ -305,8 +305,6 @@ void dpaa2_io_service_deregister(struct dpaa2_io *service,
list_del(&ctx->node);
spin_unlock_irqrestore(&d->lock_notifications, irqflags);
if (dev)
device_link_remove(dev, d->dev);
}
EXPORT_SYMBOL_GPL(dpaa2_io_service_deregister);

6
drivers/soc/fsl/guts.c
View File

@ -102,6 +102,11 @@ static const struct fsl_soc_die_attr fsl_soc_die[] = {
.svr = 0x87360000,
.mask = 0xff3f0000,
},
/* Die: LS1028A, SoC: LS1028A */
{ .die = "LS1028A",
.svr = 0x870b0000,
.mask = 0xff3f0000,
},
{ },
};
@ -224,6 +229,7 @@ static const struct of_device_id fsl_guts_of_match[] = {
{ .compatible = "fsl,ls1012a-dcfg", },
{ .compatible = "fsl,ls1046a-dcfg", },
{ .compatible = "fsl,lx2160a-dcfg", },
{ .compatible = "fsl,ls1028a-dcfg", },
{}
};
MODULE_DEVICE_TABLE(of, fsl_guts_of_match);

17
drivers/soc/fsl/qbman/bman.c
View File

@ -635,30 +635,31 @@ int bman_p_irqsource_add(struct bman_portal *p, u32 bits)
return 0;
}
static int bm_shutdown_pool(u32 bpid)
int bm_shutdown_pool(u32 bpid)
{
int err = 0;
struct bm_mc_command *bm_cmd;
union bm_mc_result *bm_res;
struct bman_portal *p = get_affine_portal();
while (1) {
struct bman_portal *p = get_affine_portal();
/* Acquire buffers until empty */
bm_cmd = bm_mc_start(&p->p);
bm_cmd->bpid = bpid;
bm_mc_commit(&p->p, BM_MCC_VERB_CMD_ACQUIRE | 1);
if (!bm_mc_result_timeout(&p->p, &bm_res)) {
put_affine_portal();
pr_crit("BMan Acquire Command timedout\n");
return -ETIMEDOUT;
err = -ETIMEDOUT;
goto done;
}
if (!(bm_res->verb & BM_MCR_VERB_ACQUIRE_BUFCOUNT)) {
put_affine_portal();
/* Pool is empty */
return 0;
goto done;
}
put_affine_portal();
}
done:
put_affine_portal();
return 0;
}

36
drivers/soc/fsl/qbman/bman_ccsr.c
View File

@ -97,17 +97,40 @@ static void bm_get_version(u16 *id, u8 *major, u8 *minor)
/* signal transactions for FBPRs with higher priority */
#define FBPR_AR_RPRIO_HI BIT(30)
static void bm_set_memory(u64 ba, u32 size)
/* Track if probe has occurred and if cleanup is required */
static int __bman_probed;
static int __bman_requires_cleanup;
static int bm_set_memory(u64 ba, u32 size)
{
u32 bar, bare;
u32 exp = ilog2(size);
/* choke if size isn't within range */
DPAA_ASSERT(size >= 4096 && size <= 1024*1024*1024 &&
is_power_of_2(size));
/* choke if '[e]ba' has lower-alignment than 'size' */
DPAA_ASSERT(!(ba & (size - 1)));
/* Check to see if BMan has already been initialized */
bar = bm_ccsr_in(REG_FBPR_BAR);
if (bar) {
/* Maker sure ba == what was programmed) */
bare = bm_ccsr_in(REG_FBPR_BARE);
if (bare != upper_32_bits(ba) || bar != lower_32_bits(ba)) {
pr_err("Attempted to reinitialize BMan with different BAR, got 0x%llx read BARE=0x%x BAR=0x%x\n",
ba, bare, bar);
return -ENOMEM;
}
pr_info("BMan BAR already configured\n");
__bman_requires_cleanup = 1;
return 1;
}
bm_ccsr_out(REG_FBPR_BARE, upper_32_bits(ba));
bm_ccsr_out(REG_FBPR_BAR, lower_32_bits(ba));
bm_ccsr_out(REG_FBPR_AR, exp - 1);
return 0;
}
/*
@ -120,7 +143,6 @@ static void bm_set_memory(u64 ba, u32 size)
*/
static dma_addr_t fbpr_a;
static size_t fbpr_sz;
static int __bman_probed;
static int bman_fbpr(struct reserved_mem *rmem)
{
@ -173,6 +195,16 @@ int bman_is_probed(void)
}
EXPORT_SYMBOL_GPL(bman_is_probed);
int bman_requires_cleanup(void)
{
return __bman_requires_cleanup;
}
void bman_done_cleanup(void)
{
__bman_requires_cleanup = 0;
}
static int fsl_bman_probe(struct platform_device *pdev)
{
int ret, err_irq;

22
drivers/soc/fsl/qbman/bman_portal.c
View File

@ -100,7 +100,7 @@ static int bman_portal_probe(struct platform_device *pdev)
struct device_node *node = dev->of_node;
struct bm_portal_config *pcfg;
struct resource *addr_phys[2];
int irq, cpu, err;
int irq, cpu, err, i;
err = bman_is_probed();
if (!err)
@ -135,10 +135,8 @@ static int bman_portal_probe(struct platform_device *pdev)
pcfg->cpu = -1;
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(dev, "Can't get %pOF IRQ'\n", node);
if (irq <= 0)
goto err_ioremap1;
}
pcfg->irq = irq;
pcfg->addr_virt_ce = memremap(addr_phys[0]->start,
@ -178,6 +176,22 @@ static int bman_portal_probe(struct platform_device *pdev)
if (!cpu_online(cpu))
bman_offline_cpu(cpu);
if (__bman_portals_probed == 1 && bman_requires_cleanup()) {
/*
* BMan wasn't reset prior to boot (Kexec for example)
* Empty all the buffer pools so they are in reset state
*/
for (i = 0; i < BM_POOL_MAX; i++) {
err = bm_shutdown_pool(i);
if (err) {
dev_err(dev, "Failed to shutdown bpool %d\n",
i);
goto err_portal_init;
}
}
bman_done_cleanup();
}
return 0;
err_portal_init:

5
drivers/soc/fsl/qbman/bman_priv.h
View File

@ -76,3 +76,8 @@ int bman_p_irqsource_add(struct bman_portal *p, u32 bits);
const struct bm_portal_config *
bman_get_bm_portal_config(const struct bman_portal *portal);
int bman_requires_cleanup(void);
void bman_done_cleanup(void);
int bm_shutdown_pool(u32 bpid);

63
drivers/soc/fsl/qbman/dpaa_sys.c
View File

@ -37,42 +37,53 @@
int qbman_init_private_mem(struct device *dev, int idx, dma_addr_t *addr,
size_t *size)
{
int ret;
struct device_node *mem_node;
u64 size64;
struct reserved_mem *rmem;
struct property *prop;
int len, err;
__be32 *res_array;
ret = of_reserved_mem_device_init_by_idx(dev, dev->of_node, idx);
if (ret) {
dev_err(dev,
"of_reserved_mem_device_init_by_idx(%d) failed 0x%x\n",
idx, ret);
return -ENODEV;
}
mem_node = of_parse_phandle(dev->of_node, "memory-region", 0);
if (mem_node) {
ret = of_property_read_u64(mem_node, "size", &size64);
if (ret) {
dev_err(dev, "of_address_to_resource fails 0x%x\n",
ret);
return -ENODEV;
}
*size = size64;
} else {
mem_node = of_parse_phandle(dev->of_node, "memory-region", idx);
if (!mem_node) {
dev_err(dev, "No memory-region found for index %d\n", idx);
return -ENODEV;
}
if (!dma_alloc_coherent(dev, *size, addr, 0)) {
dev_err(dev, "DMA Alloc memory failed\n");
rmem = of_reserved_mem_lookup(mem_node);
if (!rmem) {
dev_err(dev, "of_reserved_mem_lookup() returned NULL\n");
return -ENODEV;
}
*addr = rmem->base;
*size = rmem->size;
/*
* Disassociate the reserved memory area from the device
* because a device can only have one DMA memory area. This
* should be fine since the memory is allocated and initialized
* and only ever accessed by the QBMan device from now on
* Check if the reg property exists - if not insert the node
* so upon kexec() the same memory region address will be preserved.
* This is needed because QBMan HW does not allow the base address/
* size to be modified once set.
*/
of_reserved_mem_device_release(dev);
prop = of_find_property(mem_node, "reg", &len);
if (!prop) {
prop = devm_kzalloc(dev, sizeof(*prop), GFP_KERNEL);
if (!prop)
return -ENOMEM;
prop->value = res_array = devm_kzalloc(dev, sizeof(__be32) * 4,
GFP_KERNEL);
if (!prop->value)
return -ENOMEM;
res_array[0] = cpu_to_be32(upper_32_bits(*addr));
res_array[1] = cpu_to_be32(lower_32_bits(*addr));
res_array[2] = cpu_to_be32(upper_32_bits(*size));
res_array[3] = cpu_to_be32(lower_32_bits(*size));
prop->length = sizeof(__be32) * 4;
prop->name = devm_kstrdup(dev, "reg", GFP_KERNEL);
if (!prop->name)
return -ENOMEM;
err = of_add_property(mem_node, prop);
if (err)
return err;
}
return 0;
}

83
drivers/soc/fsl/qbman/qman.c
View File

@ -1018,6 +1018,20 @@ static inline void put_affine_portal(void)
put_cpu_var(qman_affine_portal);
}
static inline struct qman_portal *get_portal_for_channel(u16 channel)
{
int i;
for (i = 0; i < num_possible_cpus(); i++) {
if (affine_portals[i] &&
affine_portals[i]->config->channel == channel)
return affine_portals[i];
}
return NULL;
}
static struct workqueue_struct *qm_portal_wq;
int qman_dqrr_set_ithresh(struct qman_portal *portal, u8 ithresh)
@ -1070,6 +1084,20 @@ int qman_wq_alloc(void)
return 0;
}
void qman_enable_irqs(void)
{
int i;
for (i = 0; i < num_possible_cpus(); i++) {
if (affine_portals[i]) {
qm_out(&affine_portals[i]->p, QM_REG_ISR, 0xffffffff);
qm_out(&affine_portals[i]->p, QM_REG_IIR, 0);
}
}
}
/*
* This is what everything can wait on, even if it migrates to a different cpu
* to the one whose affine portal it is waiting on.
@ -1164,6 +1192,7 @@ static int drain_mr_fqrni(struct qm_portal *p)
{
const union qm_mr_entry *msg;
loop:
qm_mr_pvb_update(p);
msg = qm_mr_current(p);
if (!msg) {
/*
@ -1180,7 +1209,8 @@ loop:
* entries well before the ring has been fully consumed, so
* we're being *really* paranoid here.
*/
msleep(1);
mdelay(1);
qm_mr_pvb_update(p);
msg = qm_mr_current(p);
if (!msg)
return 0;
@ -1267,8 +1297,8 @@ static int qman_create_portal(struct qman_portal *portal,
qm_out(p, QM_REG_ISDR, isdr);
portal->irq_sources = 0;
qm_out(p, QM_REG_IER, 0);
qm_out(p, QM_REG_ISR, 0xffffffff);
snprintf(portal->irqname, MAX_IRQNAME, IRQNAME, c->cpu);
qm_out(p, QM_REG_IIR, 1);
if (request_irq(c->irq, portal_isr, 0, portal->irqname, portal)) {
dev_err(c->dev, "request_irq() failed\n");
goto fail_irq;
@ -1288,7 +1318,7 @@ static int qman_create_portal(struct qman_portal *portal,
isdr &= ~(QM_PIRQ_DQRI | QM_PIRQ_MRI);
qm_out(p, QM_REG_ISDR, isdr);
if (qm_dqrr_current(p)) {
dev_err(c->dev, "DQRR unclean\n");
dev_dbg(c->dev, "DQRR unclean\n");
qm_dqrr_cdc_consume_n(p, 0xffff);
}
if (qm_mr_current(p) && drain_mr_fqrni(p)) {
@ -1301,8 +1331,10 @@ static int qman_create_portal(struct qman_portal *portal,
}
/* Success */
portal->config = c;
qm_out(p, QM_REG_ISR, 0xffffffff);
qm_out(p, QM_REG_ISDR, 0);
qm_out(p, QM_REG_IIR, 0);
if (!qman_requires_cleanup())
qm_out(p, QM_REG_IIR, 0);
/* Write a sane SDQCR */
qm_dqrr_sdqcr_set(p, portal->sdqcr);
return 0;
@ -2581,9 +2613,9 @@ static int _qm_dqrr_consume_and_match(struct qm_portal *p, u32 fqid, int s,
#define qm_dqrr_drain_nomatch(p) \
_qm_dqrr_consume_and_match(p, 0, 0, false)
static int qman_shutdown_fq(u32 fqid)
int qman_shutdown_fq(u32 fqid)
{
struct qman_portal *p;
struct qman_portal *p, *channel_portal;
struct device *dev;
union qm_mc_command *mcc;
union qm_mc_result *mcr;
@ -2623,17 +2655,28 @@ static int qman_shutdown_fq(u32 fqid)
channel = qm_fqd_get_chan(&mcr->queryfq.fqd);
wq = qm_fqd_get_wq(&mcr->queryfq.fqd);
if (channel < qm_channel_pool1) {
channel_portal = get_portal_for_channel(channel);
if (channel_portal == NULL) {
dev_err(dev, "Can't find portal for dedicated channel 0x%x\n",
channel);
ret = -EIO;
goto out;
}
} else
channel_portal = p;
switch (state) {
case QM_MCR_NP_STATE_TEN_SCHED:
case QM_MCR_NP_STATE_TRU_SCHED:
case QM_MCR_NP_STATE_ACTIVE:
case QM_MCR_NP_STATE_PARKED:
orl_empty = 0;
mcc = qm_mc_start(&p->p);
mcc = qm_mc_start(&channel_portal->p);
qm_fqid_set(&mcc->fq, fqid);
qm_mc_commit(&p->p, QM_MCC_VERB_ALTER_RETIRE);
if (!qm_mc_result_timeout(&p->p, &mcr)) {
dev_err(dev, "QUERYFQ_NP timeout\n");
qm_mc_commit(&channel_portal->p, QM_MCC_VERB_ALTER_RETIRE);
if (!qm_mc_result_timeout(&channel_portal->p, &mcr)) {
dev_err(dev, "ALTER_RETIRE timeout\n");
ret = -ETIMEDOUT;
goto out;
}
@ -2641,6 +2684,9 @@ static int qman_shutdown_fq(u32 fqid)
QM_MCR_VERB_ALTER_RETIRE);
res = mcr->result; /* Make a copy as we reuse MCR below */
if (res == QM_MCR_RESULT_OK)
drain_mr_fqrni(&channel_portal->p);
if (res == QM_MCR_RESULT_PENDING) {
/*
* Need to wait for the FQRN in the message ring, which
@ -2670,21 +2716,25 @@ static int qman_shutdown_fq(u32 fqid)
}
/* Set the sdqcr to drain this channel */
if (channel < qm_channel_pool1)
qm_dqrr_sdqcr_set(&p->p,
qm_dqrr_sdqcr_set(&channel_portal->p,
QM_SDQCR_TYPE_ACTIVE |
QM_SDQCR_CHANNELS_DEDICATED);
else
qm_dqrr_sdqcr_set(&p->p,
qm_dqrr_sdqcr_set(&channel_portal->p,
QM_SDQCR_TYPE_ACTIVE |
QM_SDQCR_CHANNELS_POOL_CONV
(channel));
do {
/* Keep draining DQRR while checking the MR*/
qm_dqrr_drain_nomatch(&p->p);
qm_dqrr_drain_nomatch(&channel_portal->p);
/* Process message ring too */
found_fqrn = qm_mr_drain(&p->p, FQRN);
found_fqrn = qm_mr_drain(&channel_portal->p,
FQRN);
cpu_relax();
} while (!found_fqrn);
/* Restore SDQCR */
qm_dqrr_sdqcr_set(&channel_portal->p,
channel_portal->sdqcr);
}
if (res != QM_MCR_RESULT_OK &&
@ -2715,9 +2765,8 @@ static int qman_shutdown_fq(u32 fqid)
* Wait for a dequeue and process the dequeues,
* making sure to empty the ring completely
*/
} while (qm_dqrr_drain_wait(&p->p, fqid, FQ_EMPTY));
} while (!qm_dqrr_drain_wait(&p->p, fqid, FQ_EMPTY));
}
qm_dqrr_sdqcr_set(&p->p, 0);
while (!orl_empty) {
/* Wait for the ORL to have been completely drained */
@ -2754,7 +2803,7 @@ static int qman_shutdown_fq(u32 fqid)
DPAA_ASSERT((mcr->verb & QM_MCR_VERB_MASK) ==
QM_MCR_VERB_ALTER_OOS);
if (mcr->result) {
if (mcr->result != QM_MCR_RESULT_OK) {
dev_err(dev, "OOS fail: FQ 0x%x (0x%x)\n",
fqid, mcr->result);
ret = -EIO;

70
drivers/soc/fsl/qbman/qman_ccsr.c
View File

@ -274,6 +274,7 @@ static u32 __iomem *qm_ccsr_start;
/* A SDQCR mask comprising all the available/visible pool channels */
static u32 qm_pools_sdqcr;
static int __qman_probed;
static int __qman_requires_cleanup;
static inline u32 qm_ccsr_in(u32 offset)
{
@ -340,19 +341,55 @@ static void qm_get_version(u16 *id, u8 *major, u8 *minor)
}
#define PFDR_AR_EN BIT(31)
static void qm_set_memory(enum qm_memory memory, u64 ba, u32 size)
static int qm_set_memory(enum qm_memory memory, u64 ba, u32 size)
{
void *ptr;
u32 offset = (memory == qm_memory_fqd) ? REG_FQD_BARE : REG_PFDR_BARE;
u32 exp = ilog2(size);
u32 bar, bare;
/* choke if size isn't within range */
DPAA_ASSERT((size >= 4096) && (size <= 1024*1024*1024) &&
is_power_of_2(size));
/* choke if 'ba' has lower-alignment than 'size' */
DPAA_ASSERT(!(ba & (size - 1)));
/* Check to see if QMan has already been initialized */
bar = qm_ccsr_in(offset + REG_offset_BAR);
if (bar) {
/* Maker sure ba == what was programmed) */
bare = qm_ccsr_in(offset);
if (bare != upper_32_bits(ba) || bar != lower_32_bits(ba)) {
pr_err("Attempted to reinitialize QMan with different BAR, got 0x%llx read BARE=0x%x BAR=0x%x\n",
ba, bare, bar);
return -ENOMEM;
}
__qman_requires_cleanup = 1;
/* Return 1 to indicate memory was previously programmed */
return 1;
}
/* Need to temporarily map the area to make sure it is zeroed */
ptr = memremap(ba, size, MEMREMAP_WB);
if (!ptr) {
pr_crit("memremap() of QMan private memory failed\n");
return -ENOMEM;
}
memset(ptr, 0, size);
#ifdef CONFIG_PPC
/*
* PPC doesn't appear to flush the cache on memunmap() but the
* cache must be flushed since QMan does non coherent accesses
* to this memory
*/
flush_dcache_range((unsigned long) ptr, (unsigned long) ptr+size);
#endif
memunmap(ptr);
qm_ccsr_out(offset, upper_32_bits(ba));
qm_ccsr_out(offset + REG_offset_BAR, lower_32_bits(ba));
qm_ccsr_out(offset + REG_offset_AR, PFDR_AR_EN | (exp - 1));
return 0;
}
static void qm_set_pfdr_threshold(u32 th, u8 k)
@ -455,7 +492,7 @@ RESERVEDMEM_OF_DECLARE(qman_pfdr, "fsl,qman-pfdr", qman_pfdr);
#endif
static unsigned int qm_get_fqid_maxcnt(void)
unsigned int qm_get_fqid_maxcnt(void)
{
return fqd_sz / 64;
}
@ -571,12 +608,19 @@ static int qman_init_ccsr(struct device *dev)
int i, err;
/* FQD memory */
qm_set_memory(qm_memory_fqd, fqd_a, fqd_sz);
/* PFDR memory */
qm_set_memory(qm_memory_pfdr, pfdr_a, pfdr_sz);
err = qm_init_pfdr(dev, 8, pfdr_sz / 64 - 8);
if (err)
err = qm_set_memory(qm_memory_fqd, fqd_a, fqd_sz);
if (err < 0)
return err;
/* PFDR memory */
err = qm_set_memory(qm_memory_pfdr, pfdr_a, pfdr_sz);
if (err < 0)
return err;
/* Only initialize PFDRs if the QMan was not initialized before */
if (err == 0) {
err = qm_init_pfdr(dev, 8, pfdr_sz / 64 - 8);
if (err)
return err;
}
/* thresholds */
qm_set_pfdr_threshold(512, 64);
qm_set_sfdr_threshold(128);
@ -693,6 +737,18 @@ int qman_is_probed(void)
}
EXPORT_SYMBOL_GPL(qman_is_probed);
int qman_requires_cleanup(void)
{
return __qman_requires_cleanup;
}
void qman_done_cleanup(void)
{
qman_enable_irqs();
__qman_requires_cleanup = 0;
}
static int fsl_qman_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;

22
drivers/soc/fsl/qbman/qman_portal.c
View File

@ -233,7 +233,7 @@ static int qman_portal_probe(struct platform_device *pdev)
struct device_node *node = dev->of_node;
struct qm_portal_config *pcfg;
struct resource *addr_phys[2];
int irq, cpu, err;
int irq, cpu, err, i;
u32 val;
err = qman_is_probed();
@ -275,10 +275,8 @@ static int qman_portal_probe(struct platform_device *pdev)
pcfg->channel = val;
pcfg->cpu = -1;
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(dev, "Can't get %pOF IRQ\n", node);
if (irq <= 0)
goto err_ioremap1;
}
pcfg->irq = irq;
pcfg->addr_virt_ce = memremap(addr_phys[0]->start,
@ -325,6 +323,22 @@ static int qman_portal_probe(struct platform_device *pdev)
if (!cpu_online(cpu))
qman_offline_cpu(cpu);
if (__qman_portals_probed == 1 && qman_requires_cleanup()) {
/*
* QMan wasn't reset prior to boot (Kexec for example)
* Empty all the frame queues so they are in reset state
*/
for (i = 0; i < qm_get_fqid_maxcnt(); i++) {
err = qman_shutdown_fq(i);
if (err) {
dev_err(dev, "Failed to shutdown frame queue %d\n",
i);
goto err_portal_init;
}
}
qman_done_cleanup();
}
return 0;
err_portal_init:

8
drivers/soc/fsl/qbman/qman_priv.h
View File

@ -272,3 +272,11 @@ extern struct qman_portal *affine_portals[NR_CPUS];
extern struct qman_portal *qman_dma_portal;
const struct qm_portal_config *qman_get_qm_portal_config(
struct qman_portal *portal);
unsigned int qm_get_fqid_maxcnt(void);
int qman_shutdown_fq(u32 fqid);
int qman_requires_cleanup(void);
void qman_done_cleanup(void);
void qman_enable_irqs(void);

169
drivers/soc/fsl/qe/qe.c
View File

@ -10,6 +10,7 @@
* General Purpose functions for the global management of the
* QUICC Engine (QE).
*/
#include <linux/bitmap.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
@ -39,29 +40,32 @@ static DEFINE_SPINLOCK(qe_lock);
DEFINE_SPINLOCK(cmxgcr_lock);
EXPORT_SYMBOL(cmxgcr_lock);
/* QE snum state */
enum qe_snum_state {
QE_SNUM_STATE_USED,
QE_SNUM_STATE_FREE
};
/* QE snum */
struct qe_snum {
u8 num;
enum qe_snum_state state;
};
/* We allocate this here because it is used almost exclusively for
* the communication processor devices.
*/
struct qe_immap __iomem *qe_immr;
EXPORT_SYMBOL(qe_immr);
static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */
static u8 snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */
static DECLARE_BITMAP(snum_state, QE_NUM_OF_SNUM);
static unsigned int qe_num_of_snum;
static phys_addr_t qebase = -1;
static struct device_node *qe_get_device_node(void)
{
struct device_node *qe;
/*
* Newer device trees have an "fsl,qe" compatible property for the QE
* node, but we still need to support older device trees.
*/
qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (qe)
return qe;
return of_find_node_by_type(NULL, "qe");
}
static phys_addr_t get_qe_base(void)
{
struct device_node *qe;
@ -71,12 +75,9 @@ static phys_addr_t get_qe_base(void)
if (qebase != -1)
return qebase;
qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!qe) {
qe = of_find_node_by_type(NULL, "qe");
if (!qe)
return qebase;
}
qe = qe_get_device_node();
if (!qe)
return qebase;
ret = of_address_to_resource(qe, 0, &res);
if (!ret)
@ -170,12 +171,9 @@ unsigned int qe_get_brg_clk(void)
if (brg_clk)
return brg_clk;
qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!qe) {
qe = of_find_node_by_type(NULL, "qe");
if (!qe)
return brg_clk;
}
qe = qe_get_device_node();
if (!qe)
return brg_clk;
prop = of_get_property(qe, "brg-frequency", &size);
if (prop && size == sizeof(*prop))
@ -281,7 +279,6 @@ EXPORT_SYMBOL(qe_clock_source);
*/
static void qe_snums_init(void)
{
int i;
static const u8 snum_init_76[] = {
0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
@ -302,19 +299,39 @@ static void qe_snums_init(void)
0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
};
static const u8 *snum_init;
struct device_node *qe;
const u8 *snum_init;
int i;
qe_num_of_snum = qe_get_num_of_snums();
if (qe_num_of_snum == 76)
snum_init = snum_init_76;
else
snum_init = snum_init_46;
for (i = 0; i < qe_num_of_snum; i++) {
snums[i].num = snum_init[i];
snums[i].state = QE_SNUM_STATE_FREE;
bitmap_zero(snum_state, QE_NUM_OF_SNUM);
qe_num_of_snum = 28; /* The default number of snum for threads is 28 */
qe = qe_get_device_node();
if (qe) {
i = of_property_read_variable_u8_array(qe, "fsl,qe-snums",
snums, 1, QE_NUM_OF_SNUM);
if (i > 0) {
of_node_put(qe);
qe_num_of_snum = i;
return;
}
/*
* Fall back to legacy binding of using the value of
* fsl,qe-num-snums to choose one of the static arrays
* above.
*/
of_property_read_u32(qe, "fsl,qe-num-snums", &qe_num_of_snum);
of_node_put(qe);
}
if (qe_num_of_snum == 76) {
snum_init = snum_init_76;
} else if (qe_num_of_snum == 28 || qe_num_of_snum == 46) {
snum_init = snum_init_46;
} else {
pr_err("QE: unsupported value of fsl,qe-num-snums: %u\n", qe_num_of_snum);
return;
}
memcpy(snums, snum_init, qe_num_of_snum);
}
int qe_get_snum(void)
@ -324,12 +341,10 @@ int qe_get_snum(void)
int i;
spin_lock_irqsave(&qe_lock, flags);
for (i = 0; i < qe_num_of_snum; i++) {
if (snums[i].state == QE_SNUM_STATE_FREE) {
snums[i].state = QE_SNUM_STATE_USED;
snum = snums[i].num;
break;
}
i = find_first_zero_bit(snum_state, qe_num_of_snum);
if (i < qe_num_of_snum) {
set_bit(i, snum_state);
snum = snums[i];
}
spin_unlock_irqrestore(&qe_lock, flags);
@ -339,14 +354,10 @@ EXPORT_SYMBOL(qe_get_snum);
void qe_put_snum(u8 snum)
{
int i;
const u8 *p = memchr(snums, snum, qe_num_of_snum);
for (i = 0; i < qe_num_of_snum; i++) {
if (snums[i].num == snum) {
snums[i].state = QE_SNUM_STATE_FREE;
break;
}
}
if (p)
clear_bit(p - snums, snum_state);
}
EXPORT_SYMBOL(qe_put_snum);
@ -572,16 +583,9 @@ struct qe_firmware_info *qe_get_firmware_info(void)
initialized = 1;
/*
* Newer device trees have an "fsl,qe" compatible property for the QE
* node, but we still need to support older device trees.
*/
qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!qe) {
qe = of_find_node_by_type(NULL, "qe");
if (!qe)
return NULL;
}
qe = qe_get_device_node();
if (!qe)
return NULL;
/* Find the 'firmware' child node */
fw = of_get_child_by_name(qe, "firmware");
@ -627,16 +631,9 @@ unsigned int qe_get_num_of_risc(void)
unsigned int num_of_risc = 0;
const u32 *prop;
qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!qe) {
/* Older devices trees did not have an "fsl,qe"
* compatible property, so we need to look for
* the QE node by name.
*/
qe = of_find_node_by_type(NULL, "qe");
if (!qe)
return num_of_risc;
}
qe = qe_get_device_node();
if (!qe)
return num_of_risc;
prop = of_get_property(qe, "fsl,qe-num-riscs", &size);
if (prop && size == sizeof(*prop))
@ -650,37 +647,7 @@ EXPORT_SYMBOL(qe_get_num_of_risc);
unsigned int qe_get_num_of_snums(void)
{
struct device_node *qe;
int size;
unsigned int num_of_snums;
const u32 *prop;
num_of_snums = 28; /* The default number of snum for threads is 28 */
qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!qe) {
/* Older devices trees did not have an "fsl,qe"
* compatible property, so we need to look for
* the QE node by name.
*/
qe = of_find_node_by_type(NULL, "qe");
if (!qe)
return num_of_snums;
}
prop = of_get_property(qe, "fsl,qe-num-snums", &size);
if (prop && size == sizeof(*prop)) {
num_of_snums = *prop;
if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
/* No QE ever has fewer than 28 SNUMs */
pr_err("QE: number of snum is invalid\n");
of_node_put(qe);
return -EINVAL;
}
}
of_node_put(qe);
return num_of_snums;
return qe_num_of_snum;
}
EXPORT_SYMBOL(qe_get_num_of_snums);

2
drivers/soc/imx/gpcv2.c
View File

@ -198,7 +198,7 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
err = regulator_disable(domain->regulator);
if (err)
dev_err(domain->dev,
"failed to disable regulator: %d\n", ret);
"failed to disable regulator: %d\n", err);
/* Preserve earlier error code */
ret = ret ?: err;
}

39
drivers/soc/imx/soc-imx-scu.c
View File

@ -27,6 +27,40 @@ struct imx_sc_msg_misc_get_soc_id {
} data;
} __packed;
struct imx_sc_msg_misc_get_soc_uid {
struct imx_sc_rpc_msg hdr;
u32 uid_low;
u32 uid_high;
} __packed;
static ssize_t soc_uid_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct imx_sc_msg_misc_get_soc_uid msg;
struct imx_sc_rpc_msg *hdr = &msg.hdr;
u64 soc_uid;
int ret;
hdr->ver = IMX_SC_RPC_VERSION;
hdr->svc = IMX_SC_RPC_SVC_MISC;
hdr->func = IMX_SC_MISC_FUNC_UNIQUE_ID;
hdr->size = 1;
ret = imx_scu_call_rpc(soc_ipc_handle, &msg, false);
if (ret) {
pr_err("%s: get soc uid failed, ret %d\n", __func__, ret);
return ret;
}
soc_uid = msg.uid_high;
soc_uid <<= 32;
soc_uid |= msg.uid_low;
return sprintf(buf, "%016llX\n", soc_uid);
}
static DEVICE_ATTR_RO(soc_uid);
static int imx_scu_soc_id(void)
{
struct imx_sc_msg_misc_get_soc_id msg;
@ -102,6 +136,11 @@ static int imx_scu_soc_probe(struct platform_device *pdev)
goto free_revision;
}
ret = device_create_file(soc_device_to_device(soc_dev),
&dev_attr_soc_uid);
if (ret)
goto free_revision;
return 0;
free_revision:

45
drivers/soc/imx/soc-imx8.c
View File

@ -16,6 +16,9 @@
#define IMX8MQ_SW_INFO_B1 0x40
#define IMX8MQ_SW_MAGIC_B1 0xff0055aa
#define OCOTP_UID_LOW 0x410
#define OCOTP_UID_HIGH 0x420
/* Same as ANADIG_DIGPROG_IMX7D */
#define ANADIG_DIGPROG_IMX8MM 0x800
@ -24,6 +27,16 @@ struct imx8_soc_data {
u32 (*soc_revision)(void);
};
static u64 soc_uid;
static ssize_t soc_uid_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%016llX\n", soc_uid);
}
static DEVICE_ATTR_RO(soc_uid);
static u32 __init imx8mq_soc_revision(void)
{
struct device_node *np;
@ -42,6 +55,10 @@ static u32 __init imx8mq_soc_revision(void)
if (magic == IMX8MQ_SW_MAGIC_B1)
rev = REV_B1;
soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH);
soc_uid <<= 32;
soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
iounmap(ocotp_base);
out:
@ -49,6 +66,26 @@ out:
return rev;
}
static void __init imx8mm_soc_uid(void)
{
void __iomem *ocotp_base;
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,imx8mm-ocotp");
if (!np)
return;
ocotp_base = of_iomap(np, 0);
WARN_ON(!ocotp_base);
soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH);
soc_uid <<= 32;
soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
iounmap(ocotp_base);
of_node_put(np);
}
static u32 __init imx8mm_soc_revision(void)
{
struct device_node *np;
@ -66,6 +103,9 @@ static u32 __init imx8mm_soc_revision(void)
iounmap(anatop_base);
of_node_put(np);
imx8mm_soc_uid();
return rev;
}
@ -140,6 +180,11 @@ static int __init imx8_soc_init(void)
goto free_rev;
}
ret = device_create_file(soc_device_to_device(soc_dev),
&dev_attr_soc_uid);
if (ret)
goto free_rev;
if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT))
platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0);

10
drivers/soc/mediatek/mtk-cmdq-helper.c
View File

@ -136,7 +136,7 @@ static int cmdq_pkt_append_command(struct cmdq_pkt *pkt, enum cmdq_code code,
return 0;
}
int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset)
int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value)
{
u32 arg_a = (offset & CMDQ_ARG_A_WRITE_MASK) |
(subsys << CMDQ_SUBSYS_SHIFT);
@ -145,8 +145,8 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u32 value, u32 subsys, u32 offset)
}
EXPORT_SYMBOL(cmdq_pkt_write);
int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
u32 subsys, u32 offset, u32 mask)
int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
u16 offset, u32 value, u32 mask)
{
u32 offset_mask = offset;
int err = 0;
@ -161,7 +161,7 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u32 value,
}
EXPORT_SYMBOL(cmdq_pkt_write_mask);
int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event)
int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
{
u32 arg_b;
@ -181,7 +181,7 @@ int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u32 event)
}
EXPORT_SYMBOL(cmdq_pkt_wfe);
int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u32 event)
int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event)
{
if (event >= CMDQ_MAX_EVENT)
return -EINVAL;

8
drivers/soc/qcom/Kconfig
View File

@ -175,6 +175,14 @@ config QCOM_SMSM
Say yes here to support the Qualcomm Shared Memory State Machine.
The state machine is represented by bits in shared memory.
config QCOM_SOCINFO
tristate "Qualcomm socinfo driver"
depends on QCOM_SMEM
select SOC_BUS
help
Say yes here to support the Qualcomm socinfo driver, providing
information about the SoC to user space.
config QCOM_WCNSS_CTRL
tristate "Qualcomm WCNSS control driver"
depends on ARCH_QCOM || COMPILE_TEST

1
drivers/soc/qcom/Makefile
View File

@ -18,6 +18,7 @@ obj-$(CONFIG_QCOM_SMEM) += smem.o
obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
obj-$(CONFIG_QCOM_SMSM) += smsm.o
obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o
obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
obj-$(CONFIG_QCOM_APR) += apr.o
obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o

133
drivers/soc/qcom/qcom_aoss.c
View File

@ -10,6 +10,8 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/thermal.h>
#include <linux/slab.h>
#define QMP_DESC_MAGIC 0x0
#define QMP_DESC_VERSION 0x4
@ -40,6 +42,17 @@
/* 64 bytes is enough to store the requests and provides padding to 4 bytes */
#define QMP_MSG_LEN 64
#define QMP_NUM_COOLING_RESOURCES 2
static bool qmp_cdev_init_state = 1;
struct qmp_cooling_device {
struct thermal_cooling_device *cdev;
struct qmp *qmp;
char *name;
bool state;
};
/**
* struct qmp - driver state for QMP implementation
* @msgram: iomem referencing the message RAM used for communication
@ -69,6 +82,7 @@ struct qmp {
struct clk_hw qdss_clk;
struct genpd_onecell_data pd_data;
struct qmp_cooling_device *cooling_devs;
};
struct qmp_pd {
@ -385,6 +399,118 @@ static void qmp_pd_remove(struct qmp *qmp)
pm_genpd_remove(data->domains[i]);
}
static int qmp_cdev_get_max_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
*state = qmp_cdev_init_state;
return 0;
}
static int qmp_cdev_get_cur_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
struct qmp_cooling_device *qmp_cdev = cdev->devdata;
*state = qmp_cdev->state;
return 0;
}
static int qmp_cdev_set_cur_state(struct thermal_cooling_device *cdev,
unsigned long state)
{
struct qmp_cooling_device *qmp_cdev = cdev->devdata;
char buf[QMP_MSG_LEN] = {};
bool cdev_state;
int ret;
/* Normalize state */
cdev_state = !!state;
if (qmp_cdev->state == state)
return 0;
snprintf(buf, sizeof(buf),
"{class: volt_flr, event:zero_temp, res:%s, value:%s}",
qmp_cdev->name,
cdev_state ? "off" : "on");
ret = qmp_send(qmp_cdev->qmp, buf, sizeof(buf));
if (!ret)
qmp_cdev->state = cdev_state;
return ret;
}
static struct thermal_cooling_device_ops qmp_cooling_device_ops = {
.get_max_state = qmp_cdev_get_max_state,
.get_cur_state = qmp_cdev_get_cur_state,
.set_cur_state = qmp_cdev_set_cur_state,
};
static int qmp_cooling_device_add(struct qmp *qmp,
struct qmp_cooling_device *qmp_cdev,
struct device_node *node)
{
char *cdev_name = (char *)node->name;
qmp_cdev->qmp = qmp;
qmp_cdev->state = qmp_cdev_init_state;
qmp_cdev->name = cdev_name;
qmp_cdev->cdev = devm_thermal_of_cooling_device_register
(qmp->dev, node,
cdev_name,
qmp_cdev, &qmp_cooling_device_ops);
if (IS_ERR(qmp_cdev->cdev))
dev_err(qmp->dev, "unable to register %s cooling device\n",
cdev_name);
return PTR_ERR_OR_ZERO(qmp_cdev->cdev);
}
static int qmp_cooling_devices_register(struct qmp *qmp)
{
struct device_node *np, *child;
int count = QMP_NUM_COOLING_RESOURCES;
int ret;
np = qmp->dev->of_node;
qmp->cooling_devs = devm_kcalloc(qmp->dev, count,
sizeof(*qmp->cooling_devs),
GFP_KERNEL);
if (!qmp->cooling_devs)
return -ENOMEM;
for_each_available_child_of_node(np, child) {
if (!of_find_property(child, "#cooling-cells", NULL))
continue;
ret = qmp_cooling_device_add(qmp, &qmp->cooling_devs[count++],
child);
if (ret)
goto unroll;
}
return 0;
unroll:
while (--count >= 0)
thermal_cooling_device_unregister
(qmp->cooling_devs[count].cdev);
return ret;
}
static void qmp_cooling_devices_remove(struct qmp *qmp)
{
int i;
for (i = 0; i < QMP_NUM_COOLING_RESOURCES; i++)
thermal_cooling_device_unregister(qmp->cooling_devs[i].cdev);
}
static int qmp_probe(struct platform_device *pdev)
{
struct resource *res;
@ -433,6 +559,10 @@ static int qmp_probe(struct platform_device *pdev)
if (ret)
goto err_remove_qdss_clk;
ret = qmp_cooling_devices_register(qmp);
if (ret)
dev_err(&pdev->dev, "failed to register aoss cooling devices\n");
platform_set_drvdata(pdev, qmp);
return 0;
@ -453,6 +583,7 @@ static int qmp_remove(struct platform_device *pdev)
qmp_qdss_clk_remove(qmp);
qmp_pd_remove(qmp);
qmp_cooling_devices_remove(qmp);
qmp_close(qmp);
mbox_free_channel(qmp->mbox_chan);
@ -461,7 +592,9 @@ static int qmp_remove(struct platform_device *pdev)
}
static const struct of_device_id qmp_dt_match[] = {
{ .compatible = "qcom,sc7180-aoss-qmp", },
{ .compatible = "qcom,sdm845-aoss-qmp", },
{ .compatible = "qcom,sm8150-aoss-qmp", },
{}
};
MODULE_DEVICE_TABLE(of, qmp_dt_match);

11
drivers/soc/qcom/smem.c
View File

@ -84,7 +84,7 @@
#define SMEM_GLOBAL_HOST 0xfffe
/* Max number of processors/hosts in a system */
#define SMEM_HOST_COUNT 10
#define SMEM_HOST_COUNT 11
/**
* struct smem_proc_comm - proc_comm communication struct (legacy)
@ -268,6 +268,7 @@ struct qcom_smem {
struct smem_partition_header *partitions[SMEM_HOST_COUNT];
size_t cacheline[SMEM_HOST_COUNT];
u32 item_count;
struct platform_device *socinfo;
unsigned num_regions;
struct smem_region regions[];
@ -963,11 +964,19 @@ static int qcom_smem_probe(struct platform_device *pdev)
__smem = smem;
smem->socinfo = platform_device_register_data(&pdev->dev, "qcom-socinfo",
PLATFORM_DEVID_NONE, NULL,
0);
if (IS_ERR(smem->socinfo))
dev_dbg(&pdev->dev, "failed to register socinfo device\n");
return 0;
}
static int qcom_smem_remove(struct platform_device *pdev)
{
platform_device_unregister(__smem->socinfo);
hwspin_lock_free(__smem->hwlock);
__smem = NULL;

476
drivers/soc/qcom/socinfo.c 100644
View File

@ -0,0 +1,476 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2009-2017, The Linux Foundation. All rights reserved.
* Copyright (c) 2017-2019, Linaro Ltd.
*/
#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/random.h>
#include <linux/slab.h>
#include <linux/soc/qcom/smem.h>
#include <linux/string.h>
#include <linux/sys_soc.h>
#include <linux/types.h>
/*
* SoC version type with major number in the upper 16 bits and minor
* number in the lower 16 bits.
*/
#define SOCINFO_MAJOR(ver) (((ver) >> 16) & 0xffff)
#define SOCINFO_MINOR(ver) ((ver) & 0xffff)
#define SOCINFO_VERSION(maj, min) ((((maj) & 0xffff) << 16)|((min) & 0xffff))
#define SMEM_SOCINFO_BUILD_ID_LENGTH 32
/*
* SMEM item id, used to acquire handles to respective
* SMEM region.
*/
#define SMEM_HW_SW_BUILD_ID 137
#ifdef CONFIG_DEBUG_FS
#define SMEM_IMAGE_VERSION_BLOCKS_COUNT 32
#define SMEM_IMAGE_VERSION_SIZE 4096
#define SMEM_IMAGE_VERSION_NAME_SIZE 75
#define SMEM_IMAGE_VERSION_VARIANT_SIZE 20
#define SMEM_IMAGE_VERSION_OEM_SIZE 32
/*
* SMEM Image table indices
*/
#define SMEM_IMAGE_TABLE_BOOT_INDEX 0
#define SMEM_IMAGE_TABLE_TZ_INDEX 1
#define SMEM_IMAGE_TABLE_RPM_INDEX 3
#define SMEM_IMAGE_TABLE_APPS_INDEX 10
#define SMEM_IMAGE_TABLE_MPSS_INDEX 11
#define SMEM_IMAGE_TABLE_ADSP_INDEX 12
#define SMEM_IMAGE_TABLE_CNSS_INDEX 13
#define SMEM_IMAGE_TABLE_VIDEO_INDEX 14
#define SMEM_IMAGE_VERSION_TABLE 469
/*
* SMEM Image table names
*/
static const char *const socinfo_image_names[] = {
[SMEM_IMAGE_TABLE_ADSP_INDEX] = "adsp",
[SMEM_IMAGE_TABLE_APPS_INDEX] = "apps",
[SMEM_IMAGE_TABLE_BOOT_INDEX] = "boot",
[SMEM_IMAGE_TABLE_CNSS_INDEX] = "cnss",
[SMEM_IMAGE_TABLE_MPSS_INDEX] = "mpss",
[SMEM_IMAGE_TABLE_RPM_INDEX] = "rpm",
[SMEM_IMAGE_TABLE_TZ_INDEX] = "tz",
[SMEM_IMAGE_TABLE_VIDEO_INDEX] = "video",
};
static const char *const pmic_models[] = {
[0] = "Unknown PMIC model",
[9] = "PM8994",
[11] = "PM8916",
[13] = "PM8058",
[14] = "PM8028",
[15] = "PM8901",
[16] = "PM8027",
[17] = "ISL9519",
[18] = "PM8921",
[19] = "PM8018",
[20] = "PM8015",
[21] = "PM8014",
[22] = "PM8821",
[23] = "PM8038",
[24] = "PM8922",
[25] = "PM8917",
};
#endif /* CONFIG_DEBUG_FS */
/* Socinfo SMEM item structure */
struct socinfo {
__le32 fmt;
__le32 id;
__le32 ver;
char build_id[SMEM_SOCINFO_BUILD_ID_LENGTH];
/* Version 2 */
__le32 raw_id;
__le32 raw_ver;
/* Version 3 */
__le32 hw_plat;
/* Version 4 */
__le32 plat_ver;
/* Version 5 */
__le32 accessory_chip;
/* Version 6 */
__le32 hw_plat_subtype;
/* Version 7 */
__le32 pmic_model;
__le32 pmic_die_rev;
/* Version 8 */
__le32 pmic_model_1;
__le32 pmic_die_rev_1;
__le32 pmic_model_2;
__le32 pmic_die_rev_2;
/* Version 9 */
__le32 foundry_id;
/* Version 10 */
__le32 serial_num;
/* Version 11 */
__le32 num_pmics;
__le32 pmic_array_offset;
/* Version 12 */
__le32 chip_family;
__le32 raw_device_family;
__le32 raw_device_num;
};
#ifdef CONFIG_DEBUG_FS
struct socinfo_params {
u32 raw_device_family;
u32 hw_plat_subtype;
u32 accessory_chip;
u32 raw_device_num;
u32 chip_family;
u32 foundry_id;
u32 plat_ver;
u32 raw_ver;
u32 hw_plat;
u32 fmt;
};
struct smem_image_version {
char name[SMEM_IMAGE_VERSION_NAME_SIZE];
char variant[SMEM_IMAGE_VERSION_VARIANT_SIZE];
char pad;
char oem[SMEM_IMAGE_VERSION_OEM_SIZE];
};
#endif /* CONFIG_DEBUG_FS */
struct qcom_socinfo {
struct soc_device *soc_dev;
struct soc_device_attribute attr;
#ifdef CONFIG_DEBUG_FS
struct dentry *dbg_root;
struct socinfo_params info;
#endif /* CONFIG_DEBUG_FS */
};
struct soc_id {
unsigned int id;
const char *name;
};
static const struct soc_id soc_id[] = {
{ 87, "MSM8960" },
{ 109, "APQ8064" },
{ 122, "MSM8660A" },
{ 123, "MSM8260A" },
{ 124, "APQ8060A" },
{ 126, "MSM8974" },
{ 130, "MPQ8064" },
{ 138, "MSM8960AB" },
{ 139, "APQ8060AB" },
{ 140, "MSM8260AB" },
{ 141, "MSM8660AB" },
{ 178, "APQ8084" },
{ 184, "APQ8074" },
{ 185, "MSM8274" },
{ 186, "MSM8674" },
{ 194, "MSM8974PRO" },
{ 206, "MSM8916" },
{ 208, "APQ8074-AA" },
{ 209, "APQ8074-AB" },
{ 210, "APQ8074PRO" },
{ 211, "MSM8274-AA" },
{ 212, "MSM8274-AB" },
{ 213, "MSM8274PRO" },
{ 214, "MSM8674-AA" },
{ 215, "MSM8674-AB" },
{ 216, "MSM8674PRO" },
{ 217, "MSM8974-AA" },
{ 218, "MSM8974-AB" },
{ 246, "MSM8996" },
{ 247, "APQ8016" },
{ 248, "MSM8216" },
{ 249, "MSM8116" },
{ 250, "MSM8616" },
{ 291, "APQ8096" },
{ 305, "MSM8996SG" },
{ 310, "MSM8996AU" },
{ 311, "APQ8096AU" },
{ 312, "APQ8096SG" },
};
static const char *socinfo_machine(struct device *dev, unsigned int id)
{
int idx;
for (idx = 0; idx < ARRAY_SIZE(soc_id); idx++) {
if (soc_id[idx].id == id)
return soc_id[idx].name;
}
return NULL;
}
#ifdef CONFIG_DEBUG_FS
#define QCOM_OPEN(name, _func) \
static int qcom_open_##name(struct inode *inode, struct file *file) \
{ \
return single_open(file, _func, inode->i_private); \
} \
\
static const struct file_operations qcom_ ##name## _ops = { \
.open = qcom_open_##name, \
.read = seq_read, \
.llseek = seq_lseek, \
.release = single_release, \
}
#define DEBUGFS_ADD(info, name) \
debugfs_create_file(__stringify(name), 0400, \
qcom_socinfo->dbg_root, \
info, &qcom_ ##name## _ops)
static int qcom_show_build_id(struct seq_file *seq, void *p)
{
struct socinfo *socinfo = seq->private;
seq_printf(seq, "%s\n", socinfo->build_id);
return 0;
}
static int qcom_show_pmic_model(struct seq_file *seq, void *p)
{
struct socinfo *socinfo = seq->private;
int model = SOCINFO_MINOR(le32_to_cpu(socinfo->pmic_model));
if (model < 0)
return -EINVAL;
seq_printf(seq, "%s\n", pmic_models[model]);
return 0;
}
static int qcom_show_pmic_die_revision(struct seq_file *seq, void *p)
{
struct socinfo *socinfo = seq->private;
seq_printf(seq, "%u.%u\n",
SOCINFO_MAJOR(le32_to_cpu(socinfo->pmic_die_rev)),
SOCINFO_MINOR(le32_to_cpu(socinfo->pmic_die_rev)));
return 0;
}
QCOM_OPEN(build_id, qcom_show_build_id);
QCOM_OPEN(pmic_model, qcom_show_pmic_model);
QCOM_OPEN(pmic_die_rev, qcom_show_pmic_die_revision);
#define DEFINE_IMAGE_OPS(type) \
static int show_image_##type(struct seq_file *seq, void *p) \
{ \
struct smem_image_version *image_version = seq->private; \
seq_puts(seq, image_version->type); \
seq_puts(seq, "\n"); \
return 0; \
} \
static int open_image_##type(struct inode *inode, struct file *file) \
{ \
return single_open(file, show_image_##type, inode->i_private); \
} \
\
static const struct file_operations qcom_image_##type##_ops = { \
.open = open_image_##type, \
.read = seq_read, \
.llseek = seq_lseek, \
.release = single_release, \
}
DEFINE_IMAGE_OPS(name);
DEFINE_IMAGE_OPS(variant);
DEFINE_IMAGE_OPS(oem);
static void socinfo_debugfs_init(struct qcom_socinfo *qcom_socinfo,
struct socinfo *info)
{
struct smem_image_version *versions;
struct dentry *dentry;
size_t size;
int i;
qcom_socinfo->dbg_root = debugfs_create_dir("qcom_socinfo", NULL);
qcom_socinfo->info.fmt = __le32_to_cpu(info->fmt);
switch (qcom_socinfo->info.fmt) {
case SOCINFO_VERSION(0, 12):
qcom_socinfo->info.chip_family =
__le32_to_cpu(info->chip_family);
qcom_socinfo->info.raw_device_family =
__le32_to_cpu(info->raw_device_family);
qcom_socinfo->info.raw_device_num =
__le32_to_cpu(info->raw_device_num);
debugfs_create_x32("chip_family", 0400, qcom_socinfo->dbg_root,
&qcom_socinfo->info.chip_family);
debugfs_create_x32("raw_device_family", 0400,
qcom_socinfo->dbg_root,
&qcom_socinfo->info.raw_device_family);
debugfs_create_x32("raw_device_number", 0400,
qcom_socinfo->dbg_root,
&qcom_socinfo->info.raw_device_num);
/* Fall through */
case SOCINFO_VERSION(0, 11):
case SOCINFO_VERSION(0, 10):
case SOCINFO_VERSION(0, 9):
qcom_socinfo->info.foundry_id = __le32_to_cpu(info->foundry_id);
debugfs_create_u32("foundry_id", 0400, qcom_socinfo->dbg_root,
&qcom_socinfo->info.foundry_id);
/* Fall through */
case SOCINFO_VERSION(0, 8):
case SOCINFO_VERSION(0, 7):
DEBUGFS_ADD(info, pmic_model);
DEBUGFS_ADD(info, pmic_die_rev);
/* Fall through */
case SOCINFO_VERSION(0, 6):
qcom_socinfo->info.hw_plat_subtype =
__le32_to_cpu(info->hw_plat_subtype);
debugfs_create_u32("hardware_platform_subtype", 0400,
qcom_socinfo->dbg_root,
&qcom_socinfo->info.hw_plat_subtype);
/* Fall through */
case SOCINFO_VERSION(0, 5):
qcom_socinfo->info.accessory_chip =
__le32_to_cpu(info->accessory_chip);
debugfs_create_u32("accessory_chip", 0400,
qcom_socinfo->dbg_root,
&qcom_socinfo->info.accessory_chip);
/* Fall through */
case SOCINFO_VERSION(0, 4):
qcom_socinfo->info.plat_ver = __le32_to_cpu(info->plat_ver);
debugfs_create_u32("platform_version", 0400,
qcom_socinfo->dbg_root,
&qcom_socinfo->info.plat_ver);
/* Fall through */
case SOCINFO_VERSION(0, 3):
qcom_socinfo->info.hw_plat = __le32_to_cpu(info->hw_plat);
debugfs_create_u32("hardware_platform", 0400,
qcom_socinfo->dbg_root,
&qcom_socinfo->info.hw_plat);
/* Fall through */
case SOCINFO_VERSION(0, 2):
qcom_socinfo->info.raw_ver = __le32_to_cpu(info->raw_ver);
debugfs_create_u32("raw_version", 0400, qcom_socinfo->dbg_root,
&qcom_socinfo->info.raw_ver);
/* Fall through */
case SOCINFO_VERSION(0, 1):
DEBUGFS_ADD(info, build_id);
break;
}
versions = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_IMAGE_VERSION_TABLE,
&size);
for (i = 0; i < ARRAY_SIZE(socinfo_image_names); i++) {
if (!socinfo_image_names[i])
continue;
dentry = debugfs_create_dir(socinfo_image_names[i],
qcom_socinfo->dbg_root);
debugfs_create_file("name", 0400, dentry, &versions[i],
&qcom_image_name_ops);
debugfs_create_file("variant", 0400, dentry, &versions[i],
&qcom_image_variant_ops);
debugfs_create_file("oem", 0400, dentry, &versions[i],
&qcom_image_oem_ops);
}
}
static void socinfo_debugfs_exit(struct qcom_socinfo *qcom_socinfo)
{
debugfs_remove_recursive(qcom_socinfo->dbg_root);
}
#else
static void socinfo_debugfs_init(struct qcom_socinfo *qcom_socinfo,
struct socinfo *info)
{
}
static void socinfo_debugfs_exit(struct qcom_socinfo *qcom_socinfo) { }
#endif /* CONFIG_DEBUG_FS */
static int qcom_socinfo_probe(struct platform_device *pdev)
{
struct qcom_socinfo *qs;
struct socinfo *info;
size_t item_size;
info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_HW_SW_BUILD_ID,
&item_size);
if (IS_ERR(info)) {
dev_err(&pdev->dev, "Couldn't find socinfo\n");
return PTR_ERR(info);
}
qs = devm_kzalloc(&pdev->dev, sizeof(*qs), GFP_KERNEL);
if (!qs)
return -ENOMEM;
qs->attr.family = "Snapdragon";
qs->attr.machine = socinfo_machine(&pdev->dev,
le32_to_cpu(info->id));
qs->attr.revision = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%u.%u",
SOCINFO_MAJOR(le32_to_cpu(info->ver)),
SOCINFO_MINOR(le32_to_cpu(info->ver)));
if (offsetof(struct socinfo, serial_num) <= item_size)
qs->attr.serial_number = devm_kasprintf(&pdev->dev, GFP_KERNEL,
"%u",
le32_to_cpu(info->serial_num));
qs->soc_dev = soc_device_register(&qs->attr);
if (IS_ERR(qs->soc_dev))
return PTR_ERR(qs->soc_dev);
socinfo_debugfs_init(qs, info);
/* Feed the soc specific unique data into entropy pool */
add_device_randomness(info, item_size);
platform_set_drvdata(pdev, qs->soc_dev);
return 0;
}
static int qcom_socinfo_remove(struct platform_device *pdev)
{
struct qcom_socinfo *qs = platform_get_drvdata(pdev);
soc_device_unregister(qs->soc_dev);
socinfo_debugfs_exit(qs);
return 0;
}
static struct platform_driver qcom_socinfo_driver = {
.probe = qcom_socinfo_probe,
.remove = qcom_socinfo_remove,
.driver = {
.name = "qcom-socinfo",
},
};
module_platform_driver(qcom_socinfo_driver);
MODULE_DESCRIPTION("Qualcomm SoCinfo driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:qcom-socinfo");

11
drivers/soc/renesas/Kconfig
View File

@ -55,6 +55,7 @@ config ARCH_EMEV2
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
select ARM_ERRATA_754322
select PM
select PM_GENERIC_DOMAINS
select RENESAS_OSTM
@ -72,12 +73,14 @@ config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
select ARCH_RMOBILE
select ARM_ERRATA_798181 if SMP
select ARM_ERRATA_814220
select HAVE_ARM_ARCH_TIMER
select RENESAS_IRQC
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select ARCH_RMOBILE
select ARM_ERRATA_754322
select RENESAS_INTC_IRQPIN
config ARCH_R8A7743
@ -95,20 +98,24 @@ config ARCH_R8A7744
config ARCH_R8A7745
bool "RZ/G1E (R8A77450)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_814220
select SYSC_R8A7745
config ARCH_R8A77470
bool "RZ/G1C (R8A77470)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_814220
select SYSC_R8A77470
config ARCH_R8A7778
bool "R-Car M1A (R8A77781)"
select ARCH_RCAR_GEN1
select ARM_ERRATA_754322
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
select ARCH_RCAR_GEN1
select ARM_ERRATA_754322
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select SYSC_R8A7779
@ -117,6 +124,7 @@ config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
select ARM_ERRATA_814220
select I2C
select SYSC_R8A7790
@ -143,15 +151,18 @@ config ARCH_R8A7793
config ARCH_R8A7794
bool "R-Car E2 (R8A77940)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_814220
select SYSC_R8A7794
config ARCH_R9A06G032
bool "RZ/N1D (R9A06G032)"
select ARCH_RZN1
select ARM_ERRATA_814220
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
select ARCH_RMOBILE
select ARM_ERRATA_754322
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select RENESAS_INTC_IRQPIN

7
drivers/soc/renesas/rcar-sysc.c
View File

@ -170,7 +170,7 @@ struct rcar_sysc_pd {
struct generic_pm_domain genpd;
struct rcar_sysc_ch ch;
unsigned int flags;
char name[0];
char name[];
};
static inline struct rcar_sysc_pd *to_rcar_pd(struct generic_pm_domain *d)
@ -200,7 +200,6 @@ static int __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
{
struct generic_pm_domain *genpd = &pd->genpd;
const char *name = pd->genpd.name;
struct dev_power_governor *gov = &simple_qos_governor;
int error;
if (pd->flags & PD_CPU) {
@ -254,7 +253,7 @@ static int __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
rcar_sysc_power(&pd->ch, true);
finalize:
error = pm_genpd_init(genpd, gov, false);
error = pm_genpd_init(genpd, &simple_qos_governor, false);
if (error)
pr_err("Failed to init PM domain %s: %d\n", name, error);
@ -346,7 +345,7 @@ static int __init rcar_sysc_pd_init(void)
if (info->init) {
error = info->init();
if (error)
return error;
goto out_put;
}
has_cpg_mstp = of_find_compatible_node(NULL, NULL,

31
drivers/soc/renesas/rmobile-sysc.c
View File

@ -48,12 +48,8 @@ struct rmobile_pm_domain *to_rmobile_pd(struct generic_pm_domain *d)
static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
{
struct rmobile_pm_domain *rmobile_pd = to_rmobile_pd(genpd);
unsigned int mask;
unsigned int mask = BIT(rmobile_pd->bit_shift);
if (rmobile_pd->bit_shift == ~0)
return -EBUSY;
mask = BIT(rmobile_pd->bit_shift);
if (rmobile_pd->suspend) {
int ret = rmobile_pd->suspend();
@ -80,14 +76,10 @@ static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd)
{
unsigned int mask;
unsigned int mask = BIT(rmobile_pd->bit_shift);
unsigned int retry_count;
int ret = 0;
if (rmobile_pd->bit_shift == ~0)
return 0;
mask = BIT(rmobile_pd->bit_shift);
if (__raw_readl(rmobile_pd->base + PSTR) & mask)
return ret;
@ -122,11 +114,15 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
struct dev_power_governor *gov = rmobile_pd->gov;
genpd->flags |= GENPD_FLAG_PM_CLK | GENPD_FLAG_ACTIVE_WAKEUP;
genpd->power_off = rmobile_pd_power_down;
genpd->power_on = rmobile_pd_power_up;
genpd->attach_dev = cpg_mstp_attach_dev;
genpd->detach_dev = cpg_mstp_detach_dev;
__rmobile_pd_power_up(rmobile_pd);
genpd->attach_dev = cpg_mstp_attach_dev;
genpd->detach_dev = cpg_mstp_detach_dev;
if (!(genpd->flags & GENPD_FLAG_ALWAYS_ON)) {
genpd->power_off = rmobile_pd_power_down;
genpd->power_on = rmobile_pd_power_up;
__rmobile_pd_power_up(rmobile_pd);
}
pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
}
@ -270,6 +266,11 @@ static void __init rmobile_setup_pm_domain(struct device_node *np,
break;
case PD_NORMAL:
if (pd->bit_shift == ~0) {
/* Top-level always-on domain */
pr_debug("PM domain %s is always-on domain\n", name);
pd->genpd.flags |= GENPD_FLAG_ALWAYS_ON;
}
break;
}

6
drivers/soc/samsung/Kconfig
View File

@ -7,6 +7,12 @@ menuconfig SOC_SAMSUNG
if SOC_SAMSUNG
config EXYNOS_CHIPID
bool "Exynos Chipid controller driver" if COMPILE_TEST
depends on ARCH_EXYNOS || COMPILE_TEST
select MFD_SYSCON
select SOC_BUS
config EXYNOS_PMU
bool "Exynos PMU controller driver" if COMPILE_TEST
depends on ARCH_EXYNOS || ((ARM || ARM64) && COMPILE_TEST)

2
drivers/soc/samsung/Makefile
View File

@ -1,4 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_EXYNOS_CHIPID) += exynos-chipid.o
obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o
obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \

105
drivers/soc/samsung/exynos-chipid.c 100644
View File

@ -0,0 +1,105 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2019 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* EXYNOS - CHIP ID support
* Author: Pankaj Dubey <pankaj.dubey@samsung.com>
* Author: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
*/
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/soc/samsung/exynos-chipid.h>
#include <linux/sys_soc.h>
static const struct exynos_soc_id {
const char *name;
unsigned int id;
} soc_ids[] = {
{ "EXYNOS3250", 0xE3472000 },
{ "EXYNOS4210", 0x43200000 }, /* EVT0 revision */
{ "EXYNOS4210", 0x43210000 },
{ "EXYNOS4212", 0x43220000 },
{ "EXYNOS4412", 0xE4412000 },
{ "EXYNOS5250", 0x43520000 },
{ "EXYNOS5260", 0xE5260000 },
{ "EXYNOS5410", 0xE5410000 },
{ "EXYNOS5420", 0xE5420000 },
{ "EXYNOS5440", 0xE5440000 },
{ "EXYNOS5800", 0xE5422000 },
{ "EXYNOS7420", 0xE7420000 },
{ "EXYNOS5433", 0xE5433000 },
};
static const char * __init product_id_to_soc_id(unsigned int product_id)
{
int i;
for (i = 0; i < ARRAY_SIZE(soc_ids); i++)
if ((product_id & EXYNOS_MASK) == soc_ids[i].id)
return soc_ids[i].name;
return NULL;
}
int __init exynos_chipid_early_init(void)
{
struct soc_device_attribute *soc_dev_attr;
struct soc_device *soc_dev;
struct device_node *root;
struct regmap *regmap;
u32 product_id;
u32 revision;
int ret;
regmap = syscon_regmap_lookup_by_compatible("samsung,exynos4210-chipid");
if (IS_ERR(regmap))
return PTR_ERR(regmap);
ret = regmap_read(regmap, EXYNOS_CHIPID_REG_PRO_ID, &product_id);
if (ret < 0)
return ret;
revision = product_id & EXYNOS_REV_MASK;
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
return -ENOMEM;
soc_dev_attr->family = "Samsung Exynos";
root = of_find_node_by_path("/");
of_property_read_string(root, "model", &soc_dev_attr->machine);
of_node_put(root);
soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%x", revision);
soc_dev_attr->soc_id = product_id_to_soc_id(product_id);
if (!soc_dev_attr->soc_id) {
pr_err("Unknown SoC\n");
ret = -ENODEV;
goto err;
}
/* please note that the actual registration will be deferred */
soc_dev = soc_device_register(soc_dev_attr);
if (IS_ERR(soc_dev)) {
ret = PTR_ERR(soc_dev);
goto err;
}
/* it is too early to use dev_info() here (soc_dev is NULL) */
pr_info("soc soc0: Exynos: CPU[%s] PRO_ID[0x%x] REV[0x%x] Detected\n",
soc_dev_attr->soc_id, product_id, revision);
return 0;
err:
kfree(soc_dev_attr->revision);
kfree(soc_dev_attr);
return ret;
}
early_initcall(exynos_chipid_early_init);

23
drivers/soc/ti/ti_sci_pm_domains.c
View File

@ -15,15 +15,19 @@
#include <linux/pm_domain.h>
#include <linux/slab.h>
#include <linux/soc/ti/ti_sci_protocol.h>
#include <dt-bindings/soc/ti,sci_pm_domain.h>
/**
* struct ti_sci_genpd_dev_data: holds data needed for every device attached
* to this genpd
* @idx: index of the device that identifies it with the system
* control processor.
* @exclusive: Permissions for exclusive request or shared request of the
* device.
*/
struct ti_sci_genpd_dev_data {
int idx;
u8 exclusive;
};
/**
@ -55,6 +59,14 @@ static int ti_sci_dev_id(struct device *dev)
return sci_dev_data->idx;
}
static u8 is_ti_sci_dev_exclusive(struct device *dev)
{
struct generic_pm_domain_data *genpd_data = dev_gpd_data(dev);
struct ti_sci_genpd_dev_data *sci_dev_data = genpd_data->data;
return sci_dev_data->exclusive;
}
/**
* ti_sci_dev_to_sci_handle(): get pointer to ti_sci_handle
* @dev: pointer to device associated with this genpd
@ -79,7 +91,10 @@ static int ti_sci_dev_start(struct device *dev)
const struct ti_sci_handle *ti_sci = ti_sci_dev_to_sci_handle(dev);
int idx = ti_sci_dev_id(dev);
return ti_sci->ops.dev_ops.get_device(ti_sci, idx);
if (is_ti_sci_dev_exclusive(dev))
return ti_sci->ops.dev_ops.get_device_exclusive(ti_sci, idx);
else
return ti_sci->ops.dev_ops.get_device(ti_sci, idx);
}
/**
@ -110,7 +125,7 @@ static int ti_sci_pd_attach_dev(struct generic_pm_domain *domain,
if (ret < 0)
return ret;
if (pd_args.args_count != 1)
if (pd_args.args_count != 1 && pd_args.args_count != 2)
return -EINVAL;
idx = pd_args.args[0];
@ -128,6 +143,10 @@ static int ti_sci_pd_attach_dev(struct generic_pm_domain *domain,
return -ENOMEM;
sci_dev_data->idx = idx;
/* Enable the exclusive permissions by default */
sci_dev_data->exclusive = TI_SCI_PD_EXCLUSIVE;
if (pd_args.args_count == 2)
sci_dev_data->exclusive = pd_args.args[1] & 0x1;
genpd_data = dev_gpd_data(dev);
genpd_data->data = sci_dev_data;

Some files were not shown because too many files have changed in this diff Show More