redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ALSA: multisound.sh: update module namespace 

The modules for the cards described here changed their names.
Update accordingly.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
hifive-unleashed-5.1
Mauro Carvalho Chehab 2018-06-26 06:24:39 -03:00 committed by Takashi Iwai
parent 06501a6d2d
commit 513f930667
1 changed files with 36 additions and 36 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

72
Documentation/sound/cards/multisound.sh
View File

@ -34,12 +34,12 @@
# composed of the following modules (these can also operate compiled # composed of the following modules (these can also operate compiled
# into the kernel): # into the kernel):
# #
# msnd - MultiSound base (requires soundcore) # snd-msnd-lib - MultiSound base (requires snd)
# #
# msnd_classic - Base audio/mixer support for Classic, Monetery and # snd-msnd-classic - Base audio/mixer support for Classic, Monetery and
# Tahiti cards # Tahiti cards
# #
# msnd_pinnacle - Base audio/mixer support for Pinnacle and Fiji cards # snd-msnd-pinnacle - Base audio/mixer support for Pinnacle and Fiji cards
# #
# #
# Important Notes - Read Before Using # Important Notes - Read Before Using
@ -66,7 +66,7 @@
# #
# * Classic/Monterey/Tahiti # * Classic/Monterey/Tahiti
# #
# These cards are configured through the driver msnd_classic. You must # These cards are configured through the driver snd-msnd-classic. You must
# know the io port, then the driver will select the irq and memory resources # know the io port, then the driver will select the irq and memory resources
# on the card. It is up to you to know if these are free locations or now, # on the card. It is up to you to know if these are free locations or now,
# a conflict can lock the machine up. # a conflict can lock the machine up.
@ -81,10 +81,10 @@
# can be used to configure the card in non-PnP mode, and in PnP mode # can be used to configure the card in non-PnP mode, and in PnP mode
# you can use isapnptools. These are described briefly here. # you can use isapnptools. These are described briefly here.
# #
# pinnaclecfg is not required; you can use the msnd_pinnacle module # pinnaclecfg is not required; you can use the snd-msnd-pinnacle module
# to fully configure the card as well. However, pinnaclecfg can be # to fully configure the card as well. However, pinnaclecfg can be
# used to change the resource values of a particular device after the # used to change the resource values of a particular device after the
# msnd_pinnacle module has been loaded. If you are compiling the # snd-msnd-pinnacle module has been loaded. If you are compiling the
# driver into the kernel, you must set these values during compile # driver into the kernel, you must set these values during compile
# time, however other peripheral resource values can be changed with # time, however other peripheral resource values can be changed with
# the pinnaclecfg program after the kernel is loaded. # the pinnaclecfg program after the kernel is loaded.
@ -96,7 +96,7 @@
# to obtain one with the command `pnpdump 1 0x203' -- this may vary # to obtain one with the command `pnpdump 1 0x203' -- this may vary
# for you (running pnpdump by itself did not work for me). Then, # for you (running pnpdump by itself did not work for me). Then,
# edit this file and use isapnp to uncomment and set the card values. # edit this file and use isapnp to uncomment and set the card values.
# Use these values when inserting the msnd_pinnacle module. Using # Use these values when inserting the snd-msnd-pinnacle module. Using
# this method, you can set the resources for the DSP and the Kurzweil # this method, you can set the resources for the DSP and the Kurzweil
# synth (Pinnacle). Since Linux does not directly support PnP # synth (Pinnacle). Since Linux does not directly support PnP
# devices, you may have difficulty when using the card in PnP mode # devices, you may have difficulty when using the card in PnP mode
@ -133,16 +133,16 @@
# pinnaclecfg program. Using this program, you can assign the # pinnaclecfg program. Using this program, you can assign the
# resource values to the card's devices, or disable the devices. As # resource values to the card's devices, or disable the devices. As
# an alternative to using pinnaclecfg, you can specify many of the # an alternative to using pinnaclecfg, you can specify many of the
# configuration values when loading the msnd_pinnacle module (or # configuration values when loading the snd-msnd-pinnacle module (or
# during kernel configuration when compiling the driver into the # during kernel configuration when compiling the driver into the
# kernel). # kernel).
# #
# If you specify cfg=0x250 for the msnd_pinnacle module, it # If you specify cfg=0x250 for the snd-msnd-pinnacle module, it
# automatically configure the card to the given io, irq and memory # automatically configure the card to the given io, irq and memory
# values using that config port (the config port is jumper selectable # values using that config port (the config port is jumper selectable
# on the card to 0x250, 0x260 or 0x270). # on the card to 0x250, 0x260 or 0x270).
# #
# See the `msnd_pinnacle Additional Options' section below for more # See the `snd-msnd-pinnacle Additional Options' section below for more
# information on these parameters (also, if you compile the driver # information on these parameters (also, if you compile the driver
# directly into the kernel, these extra parameters can be useful # directly into the kernel, these extra parameters can be useful
# here). # here).
@ -157,44 +157,44 @@
# #
# * MultiSound Classic/Monterey/Tahiti: # * MultiSound Classic/Monterey/Tahiti:
# #
# modprobe soundcore # modprobe snd
# insmod msnd # insmod snd-msnd-lib
# insmod msnd_classic io=0x290 irq=7 mem=0xd0000 # insmod snd-msnd-classic io=0x290 irq=7 mem=0xd0000
# #
# * MultiSound Pinnacle in PnP mode: # * MultiSound Pinnacle in PnP mode:
# #
# modprobe soundcore # modprobe snd
# insmod msnd # insmod snd-msnd-lib
# isapnp mypinnacle.conf # isapnp mypinnacle.conf
# insmod msnd_pinnacle io=0x210 irq=5 mem=0xd8000 <-- match mypinnacle.conf values # insmod snd-msnd-pinnacle io=0x210 irq=5 mem=0xd8000 <-- match mypinnacle.conf values
# #
# * MultiSound Pinnacle in non-PnP mode (replace 0x250 with your configuration port, # * MultiSound Pinnacle in non-PnP mode (replace 0x250 with your configuration port,
# one of 0x250, 0x260 or 0x270): # one of 0x250, 0x260 or 0x270):
# #
# insmod soundcore # modprobe snd
# insmod msnd # insmod snd-msnd-lib
# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 # insmod snd-msnd-pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000
# #
# * To use the MPU-compatible Kurzweil synth on the Pinnacle in PnP # * To use the MPU-compatible Kurzweil synth on the Pinnacle in PnP
# mode, add the following (assumes you did `isapnp mypinnacle.conf'): # mode, add the following (assumes you did `isapnp mypinnacle.conf'):
# #
# insmod sound # insmod snd
# insmod mpu401 io=0x330 irq=9 <-- match mypinnacle.conf values # insmod mpu401 io=0x330 irq=9 <-- match mypinnacle.conf values
# #
# * To use the MPU-compatible Kurzweil synth on the Pinnacle in non-PnP # * To use the MPU-compatible Kurzweil synth on the Pinnacle in non-PnP
# mode, add the following. Note how we first configure the peripheral's # mode, add the following. Note how we first configure the peripheral's
# resources, _then_ install a Linux driver for it: # resources, _then_ install a Linux driver for it:
# #
# insmod sound # insmod snd
# pinnaclecfg 0x250 mpu 0x330 9 # pinnaclecfg 0x250 mpu 0x330 9
# insmod mpu401 io=0x330 irq=9 # insmod mpu401 io=0x330 irq=9
# #
# -- OR you can use the following sequence without pinnaclecfg in non-PnP mode: # -- OR you can use the following sequence without pinnaclecfg in non-PnP mode:
# #
# insmod soundcore # modprobe snd
# insmod msnd # insmod snd-msnd-lib
# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 mpu_io=0x330 mpu_irq=9 # insmod snd-msnd-pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 mpu_io=0x330 mpu_irq=9
# insmod sound # insmod snd
# insmod mpu401 io=0x330 irq=9 # insmod mpu401 io=0x330 irq=9
# #
# * To setup the joystick port on the Pinnacle in non-PnP mode (though # * To setup the joystick port on the Pinnacle in non-PnP mode (though
@ -203,15 +203,15 @@
# #
# pinnaclecfg 0x250 joystick 0x200 # pinnaclecfg 0x250 joystick 0x200
# #
# -- OR you can configure this using msnd_pinnacle with the following: # -- OR you can configure this using snd-msnd-pinnacle with the following:
# #
# insmod soundcore # modprobe snd
# insmod msnd # insmod snd-msnd-lib
# insmod msnd_pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 joystick_io=0x200 # insmod snd-msnd-pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 joystick_io=0x200
# #
# #
# msnd_classic, msnd_pinnacle Required Options # snd-msnd-classic, snd-msnd-pinnacle Required Options
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# #
# If the following options are not given, the module will not load. # If the following options are not given, the module will not load.
# Examine the kernel message log for informative error messages. # Examine the kernel message log for informative error messages.
@ -223,8 +223,8 @@
# mem Shared memory area, e.g. mem=0xd8000 # mem Shared memory area, e.g. mem=0xd8000
# #
# #
# msnd_classic, msnd_pinnacle Additional Options # snd-msnd-classic, snd-msnd-pinnacle Additional Options
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# #
# fifosize The digital audio FIFOs, in kilobytes. If not # fifosize The digital audio FIFOs, in kilobytes. If not
# specified, the default will be used. Increasing # specified, the default will be used. Increasing
@ -244,8 +244,8 @@
# to zero). # to zero).
# #
# #
# msnd_pinnacle Additional Options # snd-msnd-pinnacle Additional Options
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# #
# digital Specify digital=1 to enable the S/PDIF input # digital Specify digital=1 to enable the S/PDIF input
# if you have the digital daughterboard # if you have the digital daughterboard