redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

DMAENGINE: add runtime slave config to DMA40 v3 

This extends the DMA engine driver for the DMA40 used in the
U8500 platform with the generic runtime slave configuration
interface.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
hifive-unleashed-5.1
Linus Walleij 2010-08-04 13:37:45 +02:00 committed by Dan Williams
parent c156d0a5b0
commit 95e1400fa1
1 changed files with 137 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

141
drivers/dma/ste_dma40.c
View File

@ -208,6 +208,9 @@ struct d40_chan {
struct d40_def_lcsp log_def;
struct d40_lcla_elem lcla;
struct d40_log_lli_full *lcpa;
/* Runtime reconfiguration */
dma_addr_t runtime_addr;
enum dma_data_direction runtime_direction;
};
/**
@ -1886,9 +1889,16 @@ static int d40_prep_slave_sg_log(struct d40_desc *d40d,
d40d->lli_tx_len = 1;
if (direction == DMA_FROM_DEVICE)
dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
if (d40c->runtime_addr)
dev_addr = d40c->runtime_addr;
else
dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
else if (direction == DMA_TO_DEVICE)
dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
if (d40c->runtime_addr)
dev_addr = d40c->runtime_addr;
else
dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
else
return -EINVAL;
@ -1931,9 +1941,15 @@ static int d40_prep_slave_sg_phy(struct d40_desc *d40d,
if (direction == DMA_FROM_DEVICE) {
dst_dev_addr = 0;
src_dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
if (d40c->runtime_addr)
src_dev_addr = d40c->runtime_addr;
else
src_dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
} else if (direction == DMA_TO_DEVICE) {
dst_dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
if (d40c->runtime_addr)
dst_dev_addr = d40c->runtime_addr;
else
dst_dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
src_dev_addr = 0;
} else
return -EINVAL;
@ -2070,6 +2086,117 @@ static void d40_issue_pending(struct dma_chan *chan)
spin_unlock_irqrestore(&d40c->lock, flags);
}
/* Runtime reconfiguration extension */
static void d40_set_runtime_config(struct dma_chan *chan,
struct dma_slave_config *config)
{
struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
struct stedma40_chan_cfg *cfg = &d40c->dma_cfg;
enum dma_slave_buswidth config_addr_width;
dma_addr_t config_addr;
u32 config_maxburst;
enum stedma40_periph_data_width addr_width;
int psize;
if (config->direction == DMA_FROM_DEVICE) {
dma_addr_t dev_addr_rx =
d40c->base->plat_data->dev_rx[cfg->src_dev_type];
config_addr = config->src_addr;
if (dev_addr_rx)
dev_dbg(d40c->base->dev,
"channel has a pre-wired RX address %08x "
"overriding with %08x\n",
dev_addr_rx, config_addr);
if (cfg->dir != STEDMA40_PERIPH_TO_MEM)
dev_dbg(d40c->base->dev,
"channel was not configured for peripheral "
"to memory transfer (%d) overriding\n",
cfg->dir);
cfg->dir = STEDMA40_PERIPH_TO_MEM;
config_addr_width = config->src_addr_width;
config_maxburst = config->src_maxburst;
} else if (config->direction == DMA_TO_DEVICE) {
dma_addr_t dev_addr_tx =
d40c->base->plat_data->dev_tx[cfg->dst_dev_type];
config_addr = config->dst_addr;
if (dev_addr_tx)
dev_dbg(d40c->base->dev,
"channel has a pre-wired TX address %08x "
"overriding with %08x\n",
dev_addr_tx, config_addr);
if (cfg->dir != STEDMA40_MEM_TO_PERIPH)
dev_dbg(d40c->base->dev,
"channel was not configured for memory "
"to peripheral transfer (%d) overriding\n",
cfg->dir);
cfg->dir = STEDMA40_MEM_TO_PERIPH;
config_addr_width = config->dst_addr_width;
config_maxburst = config->dst_maxburst;
} else {
dev_err(d40c->base->dev,
"unrecognized channel direction %d\n",
config->direction);
return;
}
switch (config_addr_width) {
case DMA_SLAVE_BUSWIDTH_1_BYTE:
addr_width = STEDMA40_BYTE_WIDTH;
break;
case DMA_SLAVE_BUSWIDTH_2_BYTES:
addr_width = STEDMA40_HALFWORD_WIDTH;
break;
case DMA_SLAVE_BUSWIDTH_4_BYTES:
addr_width = STEDMA40_WORD_WIDTH;
break;
case DMA_SLAVE_BUSWIDTH_8_BYTES:
addr_width = STEDMA40_DOUBLEWORD_WIDTH;
break;
default:
dev_err(d40c->base->dev,
"illegal peripheral address width "
"requested (%d)\n",
config->src_addr_width);
return;
}
if (config_maxburst >= 16)
psize = STEDMA40_PSIZE_LOG_16;
else if (config_maxburst >= 8)
psize = STEDMA40_PSIZE_LOG_8;
else if (config_maxburst >= 4)
psize = STEDMA40_PSIZE_LOG_4;
else
psize = STEDMA40_PSIZE_LOG_1;
/* Set up all the endpoint configs */
cfg->src_info.data_width = addr_width;
cfg->src_info.psize = psize;
cfg->src_info.endianess = STEDMA40_LITTLE_ENDIAN;
cfg->src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL;
cfg->dst_info.data_width = addr_width;
cfg->dst_info.psize = psize;
cfg->dst_info.endianess = STEDMA40_LITTLE_ENDIAN;
cfg->dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL;
/* These settings will take precedence later */
d40c->runtime_addr = config_addr;
d40c->runtime_direction = config->direction;
dev_dbg(d40c->base->dev,
"configured channel %s for %s, data width %d, "
"maxburst %d bytes, LE, no flow control\n",
dma_chan_name(chan),
(config->direction == DMA_FROM_DEVICE) ? "RX" : "TX",
config_addr_width,
config_maxburst);
}
static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
unsigned long arg)
{
@ -2092,6 +2219,12 @@ static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
return d40_pause(chan);
case DMA_RESUME:
return d40_resume(chan);
case DMA_SLAVE_CONFIG:
d40_set_runtime_config(chan,
(struct dma_slave_config *) arg);
return 0;
default:
break;
}
/* Other commands are unimplemented */