redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

docs: hwmon: pxe1610: convert to ReST format and add to the index 

This document was recently introduced. Convert it to ReST
just like the other hwmon documents, adding it to the hwmon index.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
alistair/sunxi64-5.4-dsi
Mauro Carvalho Chehab 2019-07-26 09:51:32 -03:00 committed by Jonathan Corbet
parent 80b1505893
commit bfc8a222d3
2 changed files with 26 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/hwmon/index.rst
View File

@ -130,6 +130,7 @@ Hardware Monitoring Kernel Drivers
pcf8591
pmbus
powr1220
pxe1610
pwm-fan
raspberrypi-hwmon
sch5627

33
Documentation/hwmon/pxe1610 → Documentation/hwmon/pxe1610.rst
View File

@ -2,19 +2,29 @@ Kernel driver pxe1610
=====================
Supported chips:
* Infineon PXE1610
Prefix: 'pxe1610'
Addresses scanned: -
Datasheet: Datasheet is not publicly available.
* Infineon PXE1110
Prefix: 'pxe1110'
Addresses scanned: -
Datasheet: Datasheet is not publicly available.
* Infineon PXM1310
Prefix: 'pxm1310'
Addresses scanned: -
Datasheet: Datasheet is not publicly available.
Author: Vijay Khemka <vijaykhemka@fb.com>
@ -25,14 +35,19 @@ Description
PXE1610/PXE1110 are Multi-rail/Multiphase Digital Controllers
and compliant to
-- Intel VR13 DC-DC converter specifications.
-- Intel SVID protocol.
- Intel VR13 DC-DC converter specifications.
- Intel SVID protocol.
Used for Vcore power regulation for Intel VR13 based microprocessors
-- Servers, Workstations, and High-end desktops
- Servers, Workstations, and High-end desktops
PXM1310 is a Multi-rail Controller and it is compliant to
-- Intel VR13 DC-DC converter specifications.
-- Intel SVID protocol.
- Intel VR13 DC-DC converter specifications.
- Intel SVID protocol.
Used for DDR3/DDR4 Memory power regulation for Intel VR13 and
IMVP8 based systems
@ -44,10 +59,10 @@ This driver does not probe for PMBus devices. You will have
to instantiate devices explicitly.
Example: the following commands will load the driver for an PXE1610
at address 0x70 on I2C bus #4:
at address 0x70 on I2C bus #4::
# modprobe pxe1610
# echo pxe1610 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
# modprobe pxe1610
# echo pxe1610 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
It can also be instantiated by declaring in device tree
@ -55,6 +70,7 @@ It can also be instantiated by declaring in device tree
Sysfs attributes
----------------
====================== ====================================
curr1_label "iin"
curr1_input Measured input current
curr1_alarm Current high alarm
@ -88,3 +104,4 @@ temp[1-3]_crit Critical high temperature
temp[1-3]_crit_alarm Chip temperature critical high alarm
temp[1-3]_max Maximum temperature
temp[1-3]_max_alarm Chip temperature high alarm
====================== ====================================