[ Upstream commit e49e6f6db0 ]
All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime. In addition, a test was recently added, in tailcalls2,
to check this limit.
This patch updates the tail call limit in MIPS' JIT compiler to allow
33 tail calls.
Fixes: b6bd53f9c4 ("MIPS: Add missing file for eBPF JIT.")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/b8eb2caac1c25453c539248e56ca22f74b5316af.1575916815.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96bc4432f5 ]
All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime. In addition, a test was recently added, in tailcalls2,
to check this limit.
This patch updates the tail call limit in RISC-V's JIT compiler to allow
33 tail calls. I tested it using the above selftest on an emulated
RISCV64.
Fixes: 2353ecc6f9 ("bpf, riscv: add BPF JIT for RV64G")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/966fe384383bf23a0ee1efe8d7291c78a3fb832b.1575916815.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 961f8209c8 ]
The temperature sensor may jump backwards because there is a wrong
calibration value. Both values have to be monotonically increasing.
Fix it.
This was tested on a custom board.
Fixes: 571cebfe8e ("arm64: dts: ls1028a: Add Thermal Monitor Unit node")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30e647a764 ]
During definition of the CPU thermal zone of BCM283x SoC family there
was a misunderstanding of the meaning "criticial trip point" and the
thermal throttling range of the VideoCore firmware. The latter one takes
effect when the core temperature is at least 85 degree celsius or higher
So the current critical trip point doesn't make sense, because the
thermal shutdown appears before the firmware has a chance to throttle
the ARM core(s).
Fix these unwanted shutdowns by increasing the critical trip point
to a value which shouldn't be reached with working thermal throttling.
Fixes: 0fe4d2181c ("ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e00b59d305 ]
Commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS dependency")
removed select for DEBUG_FS but we still need it at least for enabling
deeper idle states for the SoCs.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c842b8c4ff ]
The phy mode should be rgmii-id. For some reason, it used to work with
rgmii-txid but doesn't any more.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f84337c3fb ]
Turns out SSP 3-5 are only available on cht, to avoid dumping on
undefined registers let's split the definition.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3039aef52 ]
The return value of soc_tplg_pcm_create() is currently not checked
in soc_tplg_pcm_elems_load(). If an error is to occur there, the
topology ignores it and continues loading.
Fix that by checking the status and rejecting the topology on error.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76d2703649 ]
snd_soc_add_dai_link() might fail. This situation occurs for
instance in a very specific use case where a PCM device and a
Back End DAI link are given identical names in the topology.
When this happens, soc_new_pcm_runtime() fails and then
snd_soc_add_dai_link() returns -ENOMEM when called from
soc_tplg_fe_link_create(). Because of that, the link will not
get added into the card list, so any attempt to remove it later
ends up in a panic.
Fix that by checking the return status and free the memory in case
of an error.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db23808615 ]
When an optional reset is not present, __devm_reset_control_get() and
devm_reset_control_array_get() still register resource data to release
the non-existing reset on cleanup, which is futile.
Fix this by skipping NULL reset control pointers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a841e2853e ]
The driver forgets to call pci_release_regions() in probe failure
and remove.
Add the missed calls to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191206075500.18525-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2315d3aea ]
Commit 9f532d26c7 ("ARM: exynos_defconfig: Trim and reorganize with
savedefconfig") removed explicit enable line for CONFIG_DEBUG_FS, because
that feature has been selected by other enabled options: CONFIG_TRACING,
which in turn had been selected by CONFIG_PERF_EVENTS and
CONFIG_PROVE_LOCKING.
In meantime, commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS
dependency") removed the dependency between CONFIG_DEBUG_FS and
CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds.
Enable it again explicitly, as debugfs support is essential for various
automated testing tools.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ef1ec0ca3 ]
Fix Makefile to set safesetid-test.sh to TEST_PROGS instead
of non existing run_tests.sh.
Without this fix, I got following error.
----
TAP version 13
1..1
# selftests: safesetid: run_tests.sh
# Warning: file run_tests.sh is missing!
not ok 1 selftests: safesetid: run_tests.sh
----
Fixes: c67e8ec03f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 295c4e21cf ]
Check the return value of setuid() and setgid().
This fixes the following warnings and improves test result.
safesetid-test.c: In function ‘main’:
safesetid-test.c:294:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(NO_POLICY_USER);
^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:295:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
setgid(NO_POLICY_USER);
^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:309:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(RESTRICTED_PARENT);
^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:310:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
setgid(RESTRICTED_PARENT);
^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c: In function ‘test_setuid’:
safesetid-test.c:216:3: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(child_uid);
^~~~~~~~~~~~~~~~~
Fixes: c67e8ec03f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be12252212 ]
Move -lcap to LDLIBS from CFLAGS because it is a library
to be linked.
Without this, safesetid failed to build with link error
as below.
----
/usr/bin/ld: /tmp/ccL8rZHT.o: in function `drop_caps':
safesetid-test.c:(.text+0xe7): undefined reference to `cap_get_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x107): undefined reference to `cap_set_flag'
/usr/bin/ld: safesetid-test.c:(.text+0x10f): undefined reference to `cap_set_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x117): undefined reference to `cap_free'
/usr/bin/ld: safesetid-test.c:(.text+0x136): undefined reference to `cap_clear'
collect2: error: ld returned 1 exit status
----
Fixes: c67e8ec03f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cc6c8d4a9 ]
Fix multiple kprobe event testcase to work it correctly.
There are 2 bugfixes.
- Since `wc -l FILE` returns not only line number but also
FILE filename, following "if" statement always failed.
Fix this bug by replacing it with 'cat FILE | wc -l'
- Since "while do-done loop" block with pipeline becomes a
subshell, $N local variable is not update outside of
the loop.
Fix this bug by using actual target number (256) instead
of $N.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba1b9c5048 ]
Use relative path to trigger file instead of absolute debugfs path,
because if the user uses tracefs instead of debugfs, it can be
mounted at /sys/kernel/tracing.
Anyway, since the ftracetest is designed to be run at the tracing
directory, user doesn't need to use absolute path.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25deae098e ]
Since dynamic function tracer can be disabled, set_ftrace_filter
can be disappeared. Test cases which depends on it, must check
whether the set_ftrace_filter exists or not before testing
and if not, return as unsupported.
Also, if the function tracer itself is disabled, we can not
set "function" to current_tracer. Test cases must check it
before testing, and return as unsupported.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd1baf6ca2 ]
If we run ftracetest on the kernel with CONFIG_DYNAMIC_FTRACE=n,
there is no set_ftrace_filter and all test cases are failed, because
reset_ftrace_filter() returns an error.
Let's check whether set_ftrace_filter exists in reset_ftrace_filter()
and clean up only set_ftrace_notrace in initialize_ftrace().
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81ec61074b ]
If the rule only specifies the matching side, return EOPNOTSUPP.
Otherwise, the front-end relies on the drivers to reject this rule.
Fixes: c9626a2cbd ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d2c96af79 ]
Userspace might bogusly sent NFT_DATA_VERDICT in several netlink
attributes that assume NFT_DATA_VALUE. Moreover, make sure that error
path invokes nft_data_release() to decrement the reference count on the
chain object.
Fixes: 96518518cc ("netfilter: add nftables")
Fixes: 0f3cd9b369 ("netfilter: nf_tables: add range expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bffc124b6f ]
Only NFTA_SET_ELEM_KEY and NFTA_SET_ELEM_FLAGS make sense for elements
whose NFT_SET_ELEM_INTERVAL_END flag is set on.
Fixes: 96518518cc ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db3b665dd7 ]
The existing rbtree implementation might store consecutive elements
where the closing element and the opening element might overlap, eg.
[ a, a+1) [ a+1, a+2)
This patch removes the optimization for non-anonymous sets in the exact
matching case, where it is assumed to stop searching in case that the
closing element is found. Instead, invalidate candidate interval and
keep looking further in the tree.
The lookup/get operation might return false, while there is an element
in the rbtree. Moreover, the get operation returns true as if a+2 would
be in the tree. This happens with named sets after several set updates.
The existing lookup optimization (that only works for the anonymous
sets) might not reach the opening [ a+1,... element if the closing
...,a+1) is found in first place when walking over the rbtree. Hence,
walking the full tree in that case is needed.
This patch fixes the lookup and get operations.
Fixes: e701001e7c ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates")
Fixes: ba0e4d9917 ("netfilter: nf_tables: get set elements via netlink")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 164166558a ]
With 'bytes(__u32)' being 32, a left-shift of 31 may happen which is
undefined for the signed 32-bit value 1. Avoid this by declaring 1 as
unsigned.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a76352ad2 ]
Currently we add individual copy of same OPP table for each CPU within
the cluster. This is redundant and doesn't reflect the reality.
We can't use core cpumask to set policy->cpus in ve_spc_cpufreq_init()
anymore as it gets called via cpuhp_cpufreq_online()->cpufreq_online()
->cpufreq_driver->init() and the cpumask gets updated upon CPU hotplug
operations. It also may cause issues when the vexpress_spc_cpufreq
driver is built as a module.
Since ve_spc_clk_init is built-in device initcall, we should be able to
use the same topology_core_cpumask to set the opp sharing cpumask via
dev_pm_opp_set_sharing_cpus and use the same later in the driver via
dev_pm_opp_get_sharing_cpus.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0aeb1f2b74 ]
Without this "jedec,spi-nor" compatible property, probing of the SPI NOR
does not work on the NXP i.MX6ULL EVK. Fix this by adding this
compatible property to the DT.
Fixes: 7d77b8505a ("ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration")
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b418d660bb ]
When commit:
69c1f396f2 ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation")
moved the x86 specific EFI earlyprintk implementation to a shared location,
it also tweaked the behaviour. In particular, it dropped a trick with full
framebuffer remapping after page initialization, leading to two regressions:
1) very slow scrolling after page initialization,
2) kernel hang when the 'keep_bootcon' command line argument is passed.
Putting the tweak back fixes#2 and mitigates #1, i.e., it limits the slow
behavior to the early boot stages, presumably due to eliminating heavy
map()/unmap() operations per each pixel line on the screen.
[ ardb: ensure efifb is unmapped again unless keep_bootcon is in effect. ]
[ mingo: speling fixes. ]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Fixes: 69c1f396f2 ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation")
Link: https://lkml.kernel.org/r/20191206165542.31469-7-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff397be685 ]
efi_graphics_output_protocol::query_mode() returns info in
callee-allocated memory which must be freed by the caller, which
we aren't doing.
We don't actually need to call query_mode() in order to obtain the
info for the current graphics mode, which is already there in
gop->mode->info, so just access it directly in the setup_gop32/64()
functions.
Also nothing uses the size of the info structure, so don't update the
passed-in size (which is the size of the gop_handle table in bytes)
unnecessarily.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-5-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbd89c303b ]
If we've found a usable instance of the Graphics Output Protocol
(GOP) with a framebuffer, it is possible that one of the later EFI
calls fails while checking if any support console output. In this
case status may be an EFI error code even though we found a usable
GOP.
Fix this by explicitly return EFI_SUCCESS if a usable GOP has been
located.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-4-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fc3cec30d ]
If we don't find a usable instance of the Graphics Output Protocol
(GOP) because none of them have a framebuffer (i.e. they were all
PIXEL_BLT_ONLY), but all the EFI calls succeeded, we will return
EFI_SUCCESS even though we didn't find a usable GOP.
Fix this by explicitly returning EFI_NOT_FOUND if no usable GOPs are
found, allowing the caller to probe for UGA instead.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-3-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a2e6af818 ]
Using ns0, ns1, etc. isn't a good idea, they might exist already.
Use a random suffix.
Also, older nft versions don't support "-" as alias for stdin, so
use /dev/stdin instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7eccc05c71 ]
When the Teclast X89 quirk was added we did not have jack-detection
support yet.
Note the over-current detection limit is set to 2mA instead of the usual
1.5mA because this tablet tends to give false-positive button-presses
when it is set to 1.5mA.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191203221442.2657-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af16489848 ]
Michael Weiser reported that he got this error during a kexec rebooting:
esrt: Unsupported ESRT version 2904149718861218184.
The ESRT memory stays in EFI boot services data, and it was reserved
in kernel via efi_mem_reserve(). The initial purpose of the reservation
is to reuse the EFI boot services data across kexec reboot. For example
the BGRT image data and some ESRT memory like Michael reported.
But although the memory is reserved it is not updated in the X86 E820 table,
and kexec_file_load() iterates system RAM in the IO resource list to find places
for kernel, initramfs and other stuff. In Michael's case the kexec loaded
initramfs overwrote the ESRT memory and then the failure happened.
Since kexec_file_load() depends on the E820 table being updated, just fix this
by updating the reserved EFI boot services memory as reserved type in E820.
Originally any memory descriptors with EFI_MEMORY_RUNTIME attribute are
bypassed in the reservation code path because they are assumed as reserved.
But the reservation is still needed for multiple kexec reboots,
and it is the only possible case we come here thus just drop the code
chunk, then everything works without side effects.
On my machine the ESRT memory sits in an EFI runtime data range, it does
not trigger the problem, but I successfully tested with BGRT instead.
both kexec_load() and kexec_file_load() work and kdump works as well.
[ mingo: Edited the changelog. ]
Reported-by: Michael Weiser <michael@weiser.dinsnail.net>
Tested-by: Michael Weiser <michael@weiser.dinsnail.net>
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kexec@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191204075233.GA10520@dhcp-128-65.nay.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3cde9534e ]
There are several issues with the error handling code of
the regulator_register() function:
ret = device_register(&rdev->dev);
if (ret != 0) {
put_device(&rdev->dev); --> rdev released
goto unset_supplies;
}
...
unset_supplies:
...
unset_regulator_supplies(rdev); --> use-after-free
...
clean:
if (dangling_of_gpiod)
gpiod_put(config->ena_gpiod);
kfree(rdev); --> double free
We add a variable to record the failure of device_register() and
move put_device() down a bit to avoid the above issues.
Fixes: c438b9d017 ("regulator: core: Move registration of regulator device")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20191201030250.38074-1-wenyang@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15b3904f8e ]
When we use 'O=' with make to build libtraceevent in a separate folder
it still copies 'libtraceevent.pc' to its source folder. Modify the
Makefile so that it uses the output folder to copy the pkg-config file
and install from there.
Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191115113610.21493-2-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 587db8ebda ]
When we use 'O=' with make to build libtraceevent in a separate folder
it fails to install libtraceevent.a and libtraceevent.so.1.1.0 with the
error:
INSTALL /home/sudip/linux/obj-trace/libtraceevent.a
INSTALL /home/sudip/linux/obj-trace/libtraceevent.so.1.1.0
cp: cannot stat 'libtraceevent.a': No such file or directory
Makefile:225: recipe for target 'install_lib' failed
make: *** [install_lib] Error 1
I used the command:
make O=../../../obj-trace DESTDIR=~/test prefix==/usr install
It turns out libtraceevent Makefile, even though it builds in a separate
folder, searches for libtraceevent.a and libtraceevent.so.1.1.0 in its
source folder.
So, add the 'OUTPUT' prefix to the source path so that 'make' looks for
the files in the correct place.
Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191115113610.21493-1-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e58252e33 ]
mwifiex_process_tdls_action_frame() without checking
the incoming tdls infomation element's vality before use it,
this may cause multi heap buffer overflows.
Fix them by putting vality check before use it.
IE is TLV struct, but ht_cap and ht_oper aren’t TLV struct.
the origin marvell driver code is wrong:
memcpy(&sta_ptr->tdls_cap.ht_oper, pos,....
memcpy((u8 *)&sta_ptr->tdls_cap.ht_capb, pos,...
Fix the bug by changing pos(the address of IE) to
pos+2 ( the address of IE value ).
Signed-off-by: qize wang <wangqize888888888@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1f4c96647 ]
Check for the NETDEV_UNREGISTER event from the nft_offload_netdev_event
function, which is the event that actually triggers the clean up.
Fixes: 06d392cbe3 ("netfilter: nf_tables_offload: remove rules when the device unregisters")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18a110b022 ]
Curtis Taylor and Jon Maxwell reported and debugged a crash on 3.10
based kernel.
Crash occurs in ctnetlink_conntrack_events because net->nfnl socket is
NULL. The nfnl socket was set to NULL by netns destruction running on
another cpu.
The exiting network namespace calls the relevant destructors in the
following order:
1. ctnetlink_net_exit_batch
This nulls out the event callback pointer in struct netns.
2. nfnetlink_net_exit_batch
This nulls net->nfnl socket and frees it.
3. nf_conntrack_cleanup_net_list
This removes all remaining conntrack entries.
This is order is correct. The only explanation for the crash so ar is:
cpu1: conntrack is dying, eviction occurs:
-> nf_ct_delete()
-> nf_conntrack_event_report \
-> nf_conntrack_eventmask_report
-> notify->fcn() (== ctnetlink_conntrack_events).
cpu1: a. fetches rcu protected pointer to obtain ctnetlink event callback.
b. gets interrupted.
cpu2: runs netns exit handlers:
a runs ctnetlink destructor, event cb pointer set to NULL.
b runs nfnetlink destructor, nfnl socket is closed and set to NULL.
cpu1: c. resumes and trips over NULL net->nfnl.
Problem appears to be that ctnetlink_net_exit_batch only prevents future
callers of nf_conntrack_eventmask_report() from obtaining the callback.
It doesn't wait of other cpus that might have already obtained the
callbacks address.
I don't see anything in upstream kernels that would prevent similar
crash: We need to wait for all cpus to have exited the event callback.
Fixes: 9592a5c01e ("netfilter: ctnetlink: netns support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a365e8223 ]
This fixes various data races in spinlock_debug. By testing with KCSAN,
it is observable that the console gets spammed with data races reports,
suggesting these are extremely frequent.
Example data race report:
read to 0xffff8ab24f403c48 of 4 bytes by task 221 on cpu 2:
debug_spin_lock_before kernel/locking/spinlock_debug.c:85 [inline]
do_raw_spin_lock+0x9b/0x210 kernel/locking/spinlock_debug.c:112
__raw_spin_lock include/linux/spinlock_api_smp.h:143 [inline]
_raw_spin_lock+0x39/0x40 kernel/locking/spinlock.c:151
spin_lock include/linux/spinlock.h:338 [inline]
get_partial_node.isra.0.part.0+0x32/0x2f0 mm/slub.c:1873
get_partial_node mm/slub.c:1870 [inline]
<snip>
write to 0xffff8ab24f403c48 of 4 bytes by task 167 on cpu 3:
debug_spin_unlock kernel/locking/spinlock_debug.c:103 [inline]
do_raw_spin_unlock+0xc9/0x1a0 kernel/locking/spinlock_debug.c:138
__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:159 [inline]
_raw_spin_unlock_irqrestore+0x2d/0x50 kernel/locking/spinlock.c:191
spin_unlock_irqrestore include/linux/spinlock.h:393 [inline]
free_debug_processing+0x1b3/0x210 mm/slub.c:1214
__slab_free+0x292/0x400 mm/slub.c:2864
<snip>
As a side-effect, with KCSAN, this eventually locks up the console, most
likely due to deadlock, e.g. .. -> printk lock -> spinlock_debug ->
KCSAN detects data race -> kcsan_print_report() -> printk lock ->
deadlock.
This fix will 1) avoid the data races, and 2) allow using lock debugging
together with KCSAN.
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20191120155715.28089-1-elver@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7251953d78 ]
The Freescale MPC8xxx had a special quirk for handling a
single hardwired chipselect, the case when we're using neither
GPIO nor native chip select: when inspecting the device tree
and finding zero "cs-gpios" on the device node the code would
assume we have a single hardwired chipselect that leaves the
device always selected.
This quirk is not handled by the new core code, so we need
to check the "cs-gpios" explicitly in the driver and set
pdata->max_chipselect = 1 which will later fall through to
the SPI master ->num_chipselect.
Make sure not to assign the chip select handler in this
case: there is no handling needed since the chip is always
selected, and this is what the old code did as well.
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 0f0581b24b ("spi: fsl: Convert to use CS GPIO descriptors")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> (No tested the
Link: https://lore.kernel.org/r/20191128083718.39177-3-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71b8f600b0 ]
We have a special quirk to handle the Freescale
nonstandard SPI chipselect GPIOs in the gpiolib-of.c
file, but it currently only handles the case where
the GPIOs are actually requested (gpiod_*get()).
We also need to handle that the SPI core attempts
to count the GPIOs before use, and that needs a
similar quirk in the OF part of the library.
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 0f0581b24b ("spi: fsl: Convert to use CS GPIO descriptors")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20191128083718.39177-2-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f106904968 ]
This makes the driver actually support looking up GPIO
descriptor. A coding mistake in the initial descriptor
support patch was that it was failing to turn on the very
feature it was implementing. Mea culpa.
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 0f0581b24b ("spi: fsl: Convert to use CS GPIO descriptors")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20191128083718.39177-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45dfbf5697 ]
max98090_interrupt() and max98090_pll_work() run in 2 different threads.
There are 2 possible races:
Note: M98090_REG_DEVICE_STATUS = 0x01.
Note: ULK == 0, PLL is locked; ULK == 1, PLL is unlocked.
max98090_interrupt max98090_pll_work
----------------------------------------------
schedule max98090_pll_work
restart max98090 codec
receive ULK INT
assert ULK == 0
schedule max98090_pll_work (1).
In the case (1), the PLL is locked but max98090_interrupt unnecessarily
schedules another max98090_pll_work.
max98090_interrupt max98090_pll_work max98090 codec
----------------------------------------------------------------------
ULK = 1
receive ULK INT
read 0x01
ULK = 0 (clear on read)
schedule max98090_pll_work
restart max98090 codec
ULK = 1
receive ULK INT
read 0x01
ULK = 0 (clear on read)
read 0x01
assert ULK == 0 (2).
In the case (2), both max98090_interrupt and max98090_pll_work read
the same clear-on-read register. max98090_pll_work would falsely
thought PLL is locked.
Note: the case (2) race is introduced by the previous commit ("ASoC:
max98090: exit workaround earlier if PLL is locked") to check the status
and exit the loop earlier in max98090_pll_work.
There are 2 possible solution options:
A. turn off ULK interrupt before scheduling max98090_pll_work; and turn
on again before exiting max98090_pll_work.
B. remove the second thread of execution.
Option A cannot fix the case (2) race because it still has 2 threads
access the same clear-on-read register simultaneously. Although we
could suppose the register is volatile and read the status via I2C could
be much slower than the hardware raises the bits.
Option B introduces a maximum 10~12 msec penalty delay in the interrupt
handler. However, it could only punish the jack detection by extra
10~12 msec.
Adopts option B which is the better solution overall.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-4-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4affd79a12 ]
This is caused by dereferencing 'rdev' after put_device() in
the _regulator_get()/_regulator_put() functions.
This patch just moves the put_device() down a bit to avoid the
issue.
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20191124145835.25999-1-wenyang@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Chaignon