Zen3 thermal info is supported via a new PCI device ID. Also the voltage
telemetry registers and the current factors need to be defined. k10temp
driver then searches for CPU family 0x19 and configures k10temp_data
accordingly.
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Link: https://lore.kernel.org/r/20200914200715.1997757-1-wei.huang2@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
0-day rightfully complains about a sometimes uninitialized variable
in pmbus_get_boolean().
drivers/hwmon/pmbus/pmbus_core.c:903:13: warning:
variable 'ret' is used uninitialized whenever 'if' condition is true
} else if (!s1 || !s2) {
While that is technically true, it won't be hit in the field since the
condition indicates a programming error. Move the check of that condition
into the code generating the attribute entry, and refuse generating the
attribute if the condition is true. Swap the condition check in
pmbus_get_boolean() to ensure that static analyzers don't get a hiccup
(because we check if s1 and s2 are NULL, static analyzers may believe
that they can be NULL independently of each other).
Reported-by: kernel test robot <lkp@intel.com>
Cc: Alex Qiu <xqiu@google.com>
Reviewed-by: Alex Qiu <xqiu@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Enable runtime debug control of whether the PEC byte is exchanged with
the PMBus device.
Some manufacturers have asked for the PEC to be disabled as part of
debugging driver communication issues with devices.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20200910021106.2958382-1-andrew@aj.id.au
[groeck: Replace %1llu with %llu]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Caching register values can be very expensive for PMBus chips. Some
modern chips may have 10 or more pages, with several sensors supported
per page. For example, MAX16601 creates more than 90 sysfs attributes.
Register caching for such chips is time consuming, especially if only a
few attributes are read on a regular basis. For MAX16601, it was observed
that it can take up to two seconds to read all attributes on a slow I2C
bus. In this situation, register caching results in the opposite of its
intention: It increases the number of I2C operations, in some cases
substantially, and it results in large latency when trying to access
individual sensor data.
Drop all register caching to solve the problem. Since it is no longer
necessary, drop status register mapping as part of the change, and specify
status registers directly.
Cc: Alex Qiu <xqiu@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alex Qiu <xqiu@google.com>
Tested-by: Alex Qiu <xqiu@google.com>
Link: https://lore.kernel.org/r/20200904163314.259087-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The debugfs code was intended to aid figuring out functionality
of undocumented registers. Turns out that wasn't very helpful,
since register locations change too much between AMD chip revisions,
and the data isn't really valuable for chips where it isn't already
supported. On top of that, its existence has been used as argument
for providing pseudo-API debugfs functions in other drivers.
So let's just take it out.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a fan sensor to report RPM's from a fan tach input.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The voltage telemetry registers for Zen2 are different from Zen1. Also
the factors of CPU current values are changed on Zen2. Add new definitions
for these register.
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Link: https://lore.kernel.org/r/20200827054242.2347-2-wei.huang2@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Many SMN thermal registers in Zen CPU families are common across different
generations. For long-term code maintenance, it is better to rename these
macro and function names to Zen.
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Link: https://lore.kernel.org/r/20200827054242.2347-1-wei.huang2@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use the nvmem kernel api to expose the black box
chip functionality to userspace.
Using this feature, the device is capable of recording
to nonvolatile flash memory the vital data about the
system status that caused the system to perform a
black box write.
A blackbox is 64 bytes of data containing all the
status registers, last two states of the sequencer,
timestamp and counters. The mapping of this data is
described in the adm1266 datasheet.
On power-up the driver sets the unix time to
the adm1266 using the SET_RTC command. This value
is incremented by an internal clock and it is used
as timestamp for the black box feature.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20200812142055.9213-6-alexandru.tachici@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Adm1266 exposes 9 GPIOs and 16 PDIOs which are currently read-only. They
are controlled by the internal sequencing engine.
This patch makes adm1266 driver expose GPIOs and PDIOs to user-space
using GPIO provider kernel api.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20200812142055.9213-4-alexandru.tachici@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
PmBus devices support Block Write-Block Read Process
Call described in SMBus specification v 2.0 with the
exception that Block writes and reads are permitted to
have up 255 data bytes instead of max 32 bytes (SMBus).
This patch adds Block WR process call support for ADM1266.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20200812142055.9213-3-alexandru.tachici@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add pmbus probing driver for the adm1266 Cascadable
Super Sequencer with Margin Control and Fault Recording.
Driver is using the pmbus_core, creating sysfs files
under hwmon for inputs: vh1->vh4 and vp1->vp13.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20200812142055.9213-2-alexandru.tachici@analog.com
[groeck: Use .probe_new function, adjust for changed pmbus_do_probe API]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add documentation for the newly added DTS support in the shtc1 driver.
To align with the drivers logic to have high precision by default
a boolean sensirion,low-precision is used to switch to low precision.
Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200815012227.32538-3-chris.ruehl@gtsys.com.hk
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for DTS bindings for the sensirion shtc1,shtw1 and shtc3.
Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200815012227.32538-2-chris.ruehl@gtsys.com.hk
[groeck: Resolved conflicts]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200821160035.590142-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200821160159.591293-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200821160231.592571-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Many hwmon drivers don't use the id information provided by the old
i2c probe function, and the remainder can easily be adapted to the new
form ("probe_new") by calling i2c_match_id explicitly.
This avoids scanning the identifier tables during probes.
Drivers which didn't use the id are converted as-is; drivers which did
are modified to call i2c_match_id() with the same level of
error-handling (if any) as before.
This patch wraps up the transition for hwmon, with four stragglers not
included in the previous large patch.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200821160354.594715-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver doesn't use the id information provided by the old i2c
probe function, so it can trivially be converted to the simple
("probe_new") form.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200813162851.1519546-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver doesn't use the id information provided by the old i2c
probe function, so it can trivially be converted to the simple
("probe_new") form.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200813162704.1517951-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver doesn't use the id information provided by the old i2c
probe function, so it can trivially be converted to the simple
("probe_new") form.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200813162544.1516647-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver doesn't use the id information provided by the old i2c
probe function, so it can trivially be converted to the simple
("probe_new") form.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200813162300.1514695-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver doesn't use the id information provided by the old i2c
probe function, so it can trivially be converted to the simple
("probe_new") form.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200813162026.1512242-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver doesn't use the id information provided by the old i2c
probe function, so it can trivially be converted to the simple
("probe_new") form.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200813161845.1511261-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver doesn't use the id information provided by the old i2c
probe function, so it can trivially be converted to the simple
("probe_new") form.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Link: https://lore.kernel.org/r/20200813161129.1507599-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver doesn't use the id information provided by the old i2c
probe function, so it can trivially be converted to the simple
("probe_new") form.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200813160958.1506536-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Many hwmon drivers don't use the id information provided by the old
i2c probe function, and the remainder can easily be adapted to the new
form ("probe_new") by calling i2c_match_id explicitly.
This avoids scanning the identifier tables during probes.
Drivers which didn't use the id are converted as-is; drivers which did
are modified as follows:
* if the information in i2c_client is sufficient, that's used instead
(client->name);
* anything else is handled by calling i2c_match_id() with the same
level of error-handling (if any) as before.
A few drivers aren't included in this patch because they have a
different set of maintainers. They will be covered by other patches.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200813160222.1503401-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
pmbus_do_probe doesn't use the id information provided in its second
argument, so this can be removed, which then allows using the
single-parameter i2c probe function ("probe_new") for probes.
This avoids scanning the identifier tables during probes.
Drivers which didn't use the id are converted as-is; drivers which did
are modified as follows:
* if the information in i2c_client is sufficient, that's used instead
(client->name);
* configured v. probed comparisons are performed by comparing the
configured name to the detected name, instead of the ids; this
involves strcmp but is still cheaper than comparing all the device
names when scanning the tables;
* anything else is handled by calling i2c_match_id() with the same
level of error-handling (if any) as before.
Additionally, the mismatch message in the ltc2978 driver is adjusted
so that it no longer assumes that the driver_data is an index into
ltc2978_id.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20200808210004.30880-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
On some drives, reading the drive temperature resets the drive's
spin-down timer. If the drive temperature is read too often, affected
drives will never spin down. Add this information as usage note to
the driver documentation.
Reported-by: Peter Sulyok <peter@sulyok.net>
Cc: Peter Sulyok <peter@sulyok.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Adding implementation for new attributes (rated_min/rated_max) to
cover PMBus specification about rated values reporting:
MFR_VIN_MIN, MFR_VIN_MAX, MFR_IIN_MAX, MFR_PIN_MAX, MFR_VOUT_MIN,
MFR_VOUT_MAX, MFR_IOUT_MAX, MFR_POUT_MAX, MFR_MAX_TEMP_1/2/3.
Tested with OpenBMC stack. All rated attributes were available
and reported correct values.
Signed-off-by: Zbigniew Lukwinski <zbigniew.lukwinski@linux.intel.com>
Link: https://lore.kernel.org/r/1596224237-32280-4-git-send-email-zbigniew.lukwinski@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Adding implementation for new attributes (rated_min/rated_max) for
currentX, inX, powerX, tempX and humidityX.
Tested with OpenBMC stack and simple hwmon driver using
rated_min/rated_max for the following types of sensors: hwmon_temp,
hwmon_in, hwmon_curr, hwmon_power, hwmon_humidity.
For each sensor rated attributes were available and returned
expected values.
Signed-off-by: Zbigniew Lukwinski <zbigniew.lukwinski@linux.intel.com>
Link: https://lore.kernel.org/r/1596224237-32280-3-git-send-email-zbigniew.lukwinski@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
New attributes (rated_min/rated_max) are being added the hwmon ABI.
They are needed to cover rated values documented by PMBus
specification:
PMBus Power System Mgt Protocol Specification - Part II – Revision 1.3.1,
chapters: 22.3.1 - 22.3.10, 22.3.15
Signed-off-by: Zbigniew Lukwinski <zbigniew.lukwinski@linux.intel.com>
Link: https://lore.kernel.org/r/1596224237-32280-2-git-send-email-zbigniew.lukwinski@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Smatch has a new check for resource leaks which found a bug in probe:
drivers/hwmon/w83627ehf.c:2417 w83627ehf_probe()
warn: 'res->start' not released on lines: 2412.
We need to clean up if devm_hwmon_device_register_with_info() fails.
Fixes: 266cd58359 ("hwmon: (w83627ehf) convert to with_info interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20200921125212.GA1128194@mwanda
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Starting with MAX34451, the chips of this series support STATUS_IOUT and
STATUS_TEMPERATURE commands, and no longer report over-current and
over-temperature status with STATUS_MFR_SPECIFIC.
Fixes: 7a001dbab4 ("hwmon: (pmbus/max34440) Add support for MAX34451.")
Fixes: 50115ac9b6 ("hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461")
Reported-by: Steve Foreman <foremans@google.com>
Cc: Steve Foreman <foremans@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If the temperature is read before the internal calibration is
completed, the driver returns -EIO. Instead it should return -EAGAIN
to encourage repeating the operation.
Note (groeck): Returning -EAGAIN to userspace may result in hard loops;
some userspace code interprets -EAGAIN as request to retry immediately.
I would prefer -ENODATA, but it turns out that the thermal subsystem only
handles -EAGAIN silently, so we'll have to stick with that.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Link: https://lore.kernel.org/r/20200903134704.8949-1-lars.povlsen@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
rewritten syscall number, from Kees Cook.
-----BEGIN PGP SIGNATURE-----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=qMUA
-----END PGP SIGNATURE-----
Merge tag 'core_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull syscall tracing fix from Borislav Petkov:
"Fix the seccomp syscall rewriting so that trace and audit see the
rewritten syscall number, from Kees Cook"
* tag 'core_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
core/entry: Report syscall correctly for trace and audit
Zijlstra.
* Make percpu-rwsem operations on the semaphore's ->read_count IRQ-safe
because it can be used in an IRQ context, from Hou Tao.
-----BEGIN PGP SIGNATURE-----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=70QQ
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
"Two fixes from the locking/urgent pile:
- Fix lockdep's detection of "USED" <- "IN-NMI" inversions (Peter
Zijlstra)
- Make percpu-rwsem operations on the semaphore's ->read_count
IRQ-safe because it can be used in an IRQ context (Hou Tao)"
* tag 'locking_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_count
locking/lockdep: Fix "USED" <- "IN-NMI" inversions
- ensure that the EFI bootloader control module only probes successfully
on systems that support the EFI SetVariable runtime service
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl9iCawACgkQwjcgfpV0
+n1h9Af/RQakIL5DStaEsG4Z5F91nU2EFn7U3nM+A5qCKfNhBNPvtVWWG+nJPnv1
PmNbbpREWojBjXlztJLwoqssZz20/sIVEo9w8uuiFN1CAKIWgKf4DtqA+Y1+PSWX
XU1hmq4oJZ1oJha0c9SZJAt9dmiLUO/oXSpUab9qQIUyHSZdE6wbdhMHeLj7EJkm
e12HepVaEDePYnUsEuAKAhNYL8gFs6mL13KSw94S0/ds0lTMp3cfFHr11ec2BOtn
RO2AFQBTfVW0ApGk0o+NNoeQJVnDoZ/+RFkvpuSdSTf25zGMT01Y8IFVfvfm7i4y
SwrDlFJRa5F4SmJ7l4Kj3H4op+73Fw==
=VoAH
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Borislav Petkov:
"Ensure that the EFI bootloader control module only probes successfully
on systems that support the EFI SetVariable runtime service"
[ Tag and commit from Ard Biesheuvel, forwarded by Borislav ]
* tag 'efi-urgent-for-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: efibc: check for efivars write capability
* Disable relocation relaxation for the compressed kernel when not built
as -pie as in that case kernels built with clang and linked with LLD
fail to boot due to the linker optimizing some instructions in non-PIE
form; the gory details in the commit message, from Arvind Sankar.
* A fix for the "bad bp value" warning issued by the frame-pointer
unwinder, from Josh Poimboeuf.
-----BEGIN PGP SIGNATURE-----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=og1U
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A defconfig fix (Daniel Díaz)
- Disable relocation relaxation for the compressed kernel when not
built as -pie as in that case kernels built with clang and linked
with LLD fail to boot due to the linker optimizing some instructions
in non-PIE form; the gory details in the commit message (Arvind
Sankar)
- A fix for the "bad bp value" warning issued by the frame-pointer
unwinder (Josh Poimboeuf)
* tag 'x86_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/fp: Fix FP unwinding in ret_from_fork
x86/boot/compressed: Disable relocation relaxation
x86/defconfigs: Explicitly unset CONFIG_64BIT in i386_defconfig
- Fix an original bug in device-mapper table reference counting when
interrogating dax capability in the component device. This bug was
hidden by the following bug.
- Fix device-mapper to use the proper helper (dax_supported() instead of
the leaf helper generic_fsdax_supported()) to determine dax operation
of a stacked block device configuration. The original implementation
is only valid for one level of dax-capable block device stacking. This
bug was discovered while fixing the below regression.
- Fix an infinite recursion regression introduced by broken attempts to
quiet the generic_fsdax_supported() path and make it bail out before
logging "dax capability not found" errors.
-----BEGIN PGP SIGNATURE-----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=dSAf
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A handful of fixes to address a string of mistakes in the mechanism
for device-mapper to determine if its component devices are dax
capable.
- Fix an original bug in device-mapper table reference counting when
interrogating dax capability in the component device. This bug was
hidden by the following bug.
- Fix device-mapper to use the proper helper (dax_supported() instead
of the leaf helper generic_fsdax_supported()) to determine dax
operation of a stacked block device configuration. The original
implementation is only valid for one level of dax-capable block
device stacking. This bug was discovered while fixing the below
regression.
- Fix an infinite recursion regression introduced by broken attempts
to quiet the generic_fsdax_supported() path and make it bail out
before logging "dax capability not found" errors"
* tag 'libnvdimm-fixes-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix stack overflow when mounting fsdax pmem device
dm: Call proper helper to determine dax support
dm/dax: Fix table reference counts
* A fix for a lockdep issue to avoid an asserting triggering during early boot.
There shouldn't be any incorrect behavior as the system isn't concurrent at
the time.
* The addition of a missing fence when installing early fixmap mappings.
* A corretion to the K210 device tree's interrupt map.
* A fix for M-mode timer handling on the K210.
I know it's a it of an odd time, so if these don't make rc6 it's not a big
deal, but I thought I'd just send it out now rather that waiting as these are
ready to go.
-----BEGIN PGP SIGNATURE-----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=eGo8
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for a lockdep issue to avoid an asserting triggering during
early boot. There shouldn't be any incorrect behavior as the system
isn't concurrent at the time.
- The addition of a missing fence when installing early fixmap
mappings.
- A corretion to the K210 device tree's interrupt map.
- A fix for M-mode timer handling on the K210.
* tag 'riscv-for-linus-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Resurrect the MMIO timer implementation for M-mode systems
riscv: Fix Kendryte K210 device tree
riscv: Add sfence.vma after early page table changes
RISC-V: Take text_mutex in ftrace_init_nop()
Here are some small USB and one Thunderbolt driver fixes for 5.9-rc6.
Nothing major at all, just some fixes for reported issues, and a quirk
addition:
- typec fixes
- UAS disconnect fix
- usblp race fix
- ehci-hcd modversions build fix
- ignore wakeup quirk table addition
- thunderbolt DROM read fix
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX2dYBQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynDcwCaAnv7/ntiSeWCAKo5cJr6XKy6DxoAoI3kqe6h
N4a7uHFiAVtNvtvqNr6Q
=iwyf
-----END PGP SIGNATURE-----
Merge tag 'usb-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are some small USB and one Thunderbolt driver fixes.
Nothing major at all, just some fixes for reported issues, and a quirk
addition:
- typec fixes
- UAS disconnect fix
- usblp race fix
- ehci-hcd modversions build fix
- ignore wakeup quirk table addition
- thunderbolt DROM read fix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usblp: fix race between disconnect() and read()
ehci-hcd: Move include to keep CRC stable
usb: typec: intel_pmc_mux: Handle SCU IPC error conditions
USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook
USB: UAS: fix disconnect by unplugging a hub
usb: typec: ucsi: Prevent mode overrun
usb: typec: ucsi: acpi: Increase command completion timeout value
thunderbolt: Retry DROM read once if parsing fails
Here are some small TTY/Serial and one more fbcon fix for 5.9-rc6
They include:
- serial core locking regression fixes
- new device ids for 8250_pci driver
- fbcon fix for syzbot found issue
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX2dYjA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynbqQCgvYtuyYtnmQcLCwq/SM3gRF1NlMoAn3MXqtea
3cRoC8/q0tOp2SxgPnaY
=YRtI
-----END PGP SIGNATURE-----
Merge tag 'tty-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial/fbcon fixes from Greg KH:
"Here are some small tty/serial and one more fbcon fix.
They include:
- serial core locking regression fixes
- new device ids for 8250_pci driver
- fbcon fix for syzbot found issue
All have been in linux-next with no reported issues"
* tag 'tty-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
fbcon: Fix user font detection test at fbcon_resize().
serial: 8250_pci: Add Realtek 816a and 816b
serial: core: fix console port-lock regression
serial: core: fix port-lock initialisation
