The driver use the HWMON framework to display various sensors information.
Therefore, CONFIG_HWMON must be included to prevent build errors.
This patch adds "select HWMON" to the driver's Kconfig file to make sure
HWMON is built. In addition, to avoid breaking dependencies, it adds
dependency on HAS_IOMEM because HWMON is dependent on HAS_IOMEM.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When parsing the address of an internal command buffer, the driver prints
an error if the buffer's address is not in the range of the device's DRAM
or SRAM memory address space.
Use %px to print the real address that the user gave the driver and not a
hashed value, so the user will get a clue regarding the origin of his
error.
Note that if the print occurs, the pointer that is printed is a
user's virtual address and not some kind of physical address.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
useful to investigate performance issues. By Kimberly Brown.
2. Switching to the new generic UUID API, by Andy Shevchenko.
-----BEGIN PGP SIGNATURE-----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=hDVS
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux into char-misc-next
Sasha writes:
1. Exopsing counters for state changes of channel ring buffers; this is
useful to investigate performance issues. By Kimberly Brown.
2. Switching to the new generic UUID API, by Andy Shevchenko.
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Expose counters for interrupts and full conditions
vmbus: Switch to use new generic UUID API
This patch fix compilation error in 32-bit ARM architecture regarding
division of 2 64-bit variables.
Use the kernel do_div() macro, which is implemented per architecture, for
doing these divisions instead of using the / operator.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9ed3f22223 ("intel_th: Don't reference unassigned outputs")
fixes a NULL dereference for all masters except the last one ("256+"),
which keeps the stale pointer after the output driver had been unassigned.
Fix the off-by-one.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: 9ed3f22223 ("intel_th: Don't reference unassigned outputs")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add __cpu_to_le16/32/64 and __le16/32/64_to_cpu where needed according to
sparse.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following sparse warnings:
drivers/misc/habanalabs/hwmon.c:20:56: warning: Using plain integer as NULL pointer
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix a bug in the driver, where if the TPC or MME remains in
non-IDLE even after all the command submissions are done (due to user bug
or malicious user), then future command submissions will fail in the
context-switch stage and the driver will remain in "stuck" mode.
The fix is to do a soft-reset of the device in case the context-switch
fails, because the device should be IDLE during context-switch. If it is
not IDLE, then something is wrong and we should reset the compute engines.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't cast pointer to u64 to print it. Instead, print the pointer using
%p.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix a bug when a command buffer with unaligned size (with
regard to PAGE_SIZE) was used. The accounting for the unmap operation
wasn't done correctly and could result in a memory leak.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix a bug where EINVAL was returned instead of -EINVAL.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add comment about minimum and maximum size of command buffer.
Add some text about the expected input of CS IOCTL.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix a bug where the timeout for sending a job on QMAN0 by KMD
wasn't enough in palladium environment.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix a bug where DMA channel 0 completion address wasn't
initialized by the driver.
The patch sets the address to Sync Object no. 1007
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix a bug in the validation of WREG32 in DMA queues. The
validation was too strict. It allowed the user to set the completion
address only for DMA channel 1.
The fix allows the user to set the completion address for all 5 DMA
channels.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix an incorrect initialization of the MMU cache registers. The
shift operation was done in the wrong direction.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch provides a workaround for a bug in the F/W where the response
time for a request from KMD may take more then 100ms. This could cause the
queue between KMD and the F/W to get out of sync.
The WA is to:
1. Increase the timeout of ALL requests to 1s.
2. In case a request isn't answered in time, mark the state as
"cpu_disabled" and prevent sending further requests from KMD to the F/W.
This will eventually lead to a heartbeat failure and hard reset of the
device.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch provides a workaround for a H/W bug in Goya, where access to
RAZWI from TPC can cause PCI completion timeout.
The WA is to use the device MMU to map any unmapped DRAM memory to a
default page in the DRAM. That way, the TPC will never reach RAZWI upon
accessing a bad address in the DRAM.
When a DRAM page is mapped by the user, its default mapping is
overwritten. Once that page is unmapped, the MMU driver will map that page
to the default page.
To help debugging, the driver will set the default page area to 0x99 on
device initialization.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch provides a workaround for a H/W bug in the RAZWI logger in
Goya. The logger doesn't recognize the initiator correctly and as a
result, accesses from one initiator are reported that were coming from a
different initiator.
The WA is to print the error information from the event entries we receive
without looking at the RAZWI logger at all.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei driver for the me hdcp client, for use by drm/i915.
Including the following prep work:
- whitelist hdcp client in mei bus
- merge to include char-misc-next
- drm/i915 side of the mei_hdcp/i915 component interface
- component prep work (including one patch touching i915&snd-hda)
-----BEGIN PGP SIGNATURE-----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=IvjR
-----END PGP SIGNATURE-----
Merge tag 'topic/mei-hdcp-2019-02-26' of git://anongit.freedesktop.org/drm/drm-intel into char-misc-next
Daniel writes:
mei-hdcp driver
mei driver for the me hdcp client, for use by drm/i915.
Including the following prep work:
- whitelist hdcp client in mei bus
- merge to include char-misc-next
- drm/i915 side of the mei_hdcp/i915 component interface
- component prep work (including one patch touching i915&snd-hda)
* tag 'topic/mei-hdcp-2019-02-26' of git://anongit.freedesktop.org/drm/drm-intel: (23 commits)
misc/mei/hdcp: Component framework for I915 Interface
misc/mei/hdcp: Closing wired HDCP2.2 Tx Session
misc/mei/hdcp: Enabling the HDCP authentication
misc/mei/hdcp: Verify M_prime
misc/mei/hdcp: Repeater topology verification and ack
misc/mei/hdcp: Prepare Session Key
misc/mei/hdcp: Verify L_prime
misc/mei/hdcp: Initiate Locality check
misc/mei/hdcp: Store the HDCP Pairing info
misc/mei/hdcp: Verify H_prime
misc/mei/hdcp: Verify Receiver Cert and prepare km
misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session
misc/mei/hdcp: Define ME FW interface for HDCP2.2
misc/mei/hdcp: Client driver for HDCP application
mei: bus: whitelist hdcp client
drm/audio: declaration of struct device
drm: helper functions for hdcp2 seq_num to from u32
drm/i915: MEI interface definition
drm/i915: header for i915 - MEI_HDCP interface
drm/i915: enum port definition is moved into i915_drm.h
...
CL2600/CL2800 servers leveraged Proliant hardware but are targeted to a
different market segment and come with a different firmware base. Based
upon targeted market needs, the servers de-featured certain aspects of iLO.
As a result, hpilo driver still claims the hardware but is not functional,
so we decided to blacklist it with SSID 0x0289 to reduce confusion to
customers.
Signed-off-by: Matt Hsiao <matt.hsiao@hpe.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of having explicit if statements excluding devices,
use a pci_device_id table of devices to blacklist.
HPE will put out minor updates to the iLO using the same device
info except for the subsystem device id. hpilo driver takes the
approach to claim based upon {Vendor, Device, SubVendor} and it
allows old software to work on new hardware without patching.
As our primary way to support our customers is via distros, the
patching process could take months to go upstream and then
backported to multiple releases of multiple distros.
This approach worked fairly well as this is only the second time
in 10+ years that we need to blacklist an instance.
Signed-off-by: Matt Hsiao <matt.hsiao@hpe.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warning:
drivers/virt/vboxguest/vboxguest_core.c: In function ‘vbg_core_ioctl’:
drivers/virt/vboxguest/vboxguest_core.c:1486:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
f32bit = true;
~~~~~~~^~~~~~
drivers/virt/vboxguest/vboxguest_core.c:1489:2: note: here
case VBG_IOCTL_HGCM_CALL(0):
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warning:
drivers/misc/mic/scif/scif_rma.c: In function ‘scif_unregister_window’:
drivers/misc/mic/scif/scif_rma.c:665:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
send_msg = true;
~~~~~~~~~^~~~~~
drivers/misc/mic/scif/scif_rma.c:668:2: note: here
case OP_IN_PROGRESS:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the below sparse warnings by either making the functions
static or by adding a declaration in the relevant header file.
In addition, the patch removes goya_mmap completely as it doesn't add any
additional benefit.
Fixes the following sparse warnings:
drivers/misc/habanalabs/habanalabs_drv.c:24:1: warning: symbol 'hl_devs_idr' was not declared. Should it be static?
drivers/misc/habanalabs/habanalabs_drv.c:25:1: warning: symbol 'hl_devs_idr_lock' was not declared. Should it be static?
drivers/misc/habanalabs/memory.c:1451:5: warning: symbol 'hl_vm_ctx_init_with_ranges' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:396:5: warning: symbol 'goya_send_pci_access_msg' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:417:5: warning: symbol 'goya_pci_bars_map' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:557:6: warning: symbol 'goya_reset_link_through_bridge' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:774:5: warning: symbol 'goya_early_fini' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:857:6: warning: symbol 'goya_late_fini' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:971:5: warning: symbol 'goya_sw_fini' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:1233:5: warning: symbol 'goya_init_cpu_queues' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:2914:5: warning: symbol 'goya_suspend' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:2939:5: warning: symbol 'goya_resume' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:2952:5: warning: symbol 'goya_mmap' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:2957:5: warning: symbol 'goya_cb_mmap' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:2973:6: warning: symbol 'goya_ring_doorbell' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:3063:6: warning: symbol 'goya_flush_pq_write' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:3068:6: warning: symbol 'goya_dma_alloc_coherent' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:3074:6: warning: symbol 'goya_dma_free_coherent' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:3080:6: warning: symbol 'goya_get_int_queue_base' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:3138:5: warning: symbol 'goya_send_job_on_qman0' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:3295:5: warning: symbol 'goya_test_queue' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:3417:6: warning: symbol 'goya_dma_pool_zalloc' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:3426:6: warning: symbol 'goya_dma_pool_free' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:3432:6: warning: symbol 'goya_cpu_accessible_dma_pool_alloc' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:3448:6: warning: symbol 'goya_cpu_accessible_dma_pool_free' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:3458:5: warning: symbol 'goya_dma_map_sg' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:3467:6: warning: symbol 'goya_dma_unmap_sg' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:3473:5: warning: symbol 'goya_get_dma_desc_list_size' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:4210:5: warning: symbol 'goya_parse_cb_no_mmu' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:4261:5: warning: symbol 'goya_parse_cb_no_ext_quque' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:4294:5: warning: symbol 'goya_cs_parser' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:4307:6: warning: symbol 'goya_add_end_of_cb_packets' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:4334:5: warning: symbol 'goya_context_switch' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:4426:6: warning: symbol 'goya_restore_phase_topology' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:4460:5: warning: symbol 'goya_debugfs_read32' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:4510:5: warning: symbol 'goya_debugfs_write32' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:4738:6: warning: symbol 'goya_handle_eqe' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:4836:6: warning: symbol 'goya_get_events_stat' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:5075:5: warning: symbol 'goya_send_heartbeat' was not declared. Should it be static?
drivers/misc/habanalabs/goya/goya.c:5253:5: warning: symbol 'goya_get_eeprom_data' was not declared. Should it be static?
Reported-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch increase the size field in the uapi structure of the Memory
IOCTL from 32-bit to 64-bit. This is to allow the user to allocate and/or
map memory in chunks that are larger then 4GB.
Goya's device memory (DRAM) can be up to 16GB, and for certain
topologies, the user may want an allocation that is larger than 4GB.
This change doesn't break current user-space because there was a "pad"
field in the uapi structure right after the size field. Changing the size
field to be 64-bit and removing the pad field maintains compatibility with
current user-space.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VOP_BUS does not actually depend on x86-64 or PCI or X86_DEV_DMA_OPS.
The dependency on X86_DEV_DMA_OPS has been unnecessary since commit
5657933dbb ("treewide: Move dma_ops from struct dev_archdata into
struct device").
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some architectures (like MIPS) implement ioremap as a macro, and this
leads to conflicts with the ioremap function pointer in various mic
structures.
drivers/misc/mic/vop/vop_vringh.c:
In function 'vop_virtio_init_post':
drivers/misc/mic/vop/vop_vringh.c:86:13:
error: macro "ioremap" passed 3 arguments, but takes just 2
Rename ioremap to remap to fix this. Likewise for iounmap.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix these on 32-bit:
vop_vringh.c:711:13: error: cast from pointer to integer of different
size [-Werror=pointer-to-int-cast]
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
size = sizeof(struct foo) + count * sizeof(struct boo);
instance = kzalloc(size, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
Notice that, in this case, variable siz is not necessary, hence
it is removed.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support in the VMCI driver to handle upto 64-bit PPNs when the VMCI
device exposes the capability for 64-bit PPNs.
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this enables and adds OCP function for Realtek A series cardreader chips
and fixes some OCP flow in rts5260.c
Signed-off-by: RickyWu <ricky_wu@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SDM845 has ETMv4.2 and can use the existing etm4x driver.
But the current etm driver checks only for ETMv4.0 and
errors out for other etm4x versions. This patch adds this
missing support to enable SoC's with ETMv4x to use same
driver by checking only the ETM architecture major version
number.
Without this change, we get below error during etm probe:
/ # dmesg | grep etm
[ 6.660093] coresight-etm4x: probe of 7040000.etm failed with error -22
[ 6.666902] coresight-etm4x: probe of 7140000.etm failed with error -22
[ 6.673708] coresight-etm4x: probe of 7240000.etm failed with error -22
[ 6.680511] coresight-etm4x: probe of 7340000.etm failed with error -22
[ 6.687313] coresight-etm4x: probe of 7440000.etm failed with error -22
[ 6.694113] coresight-etm4x: probe of 7540000.etm failed with error -22
[ 6.700914] coresight-etm4x: probe of 7640000.etm failed with error -22
[ 6.707717] coresight-etm4x: probe of 7740000.etm failed with error -22
With this change, etm probe is successful:
/ # dmesg | grep etm
[ 6.659198] coresight-etm4x 7040000.etm: CPU0: ETM v4.2 initialized
[ 6.665848] coresight-etm4x 7140000.etm: CPU1: ETM v4.2 initialized
[ 6.672493] coresight-etm4x 7240000.etm: CPU2: ETM v4.2 initialized
[ 6.679129] coresight-etm4x 7340000.etm: CPU3: ETM v4.2 initialized
[ 6.685770] coresight-etm4x 7440000.etm: CPU4: ETM v4.2 initialized
[ 6.692403] coresight-etm4x 7540000.etm: CPU5: ETM v4.2 initialized
[ 6.699024] coresight-etm4x 7640000.etm: CPU6: ETM v4.2 initialized
[ 6.705646] coresight-etm4x 7740000.etm: CPU7: ETM v4.2 initialized
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes two smatch warnings about two if statements that are
always true because of the types of the variables used - u32 when
comparing the sum to u32_max.
The patch changes the types to be u64 so the accumalted sum can be checked
if it is larger than u32_max
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix unbalanced module reference counting during internal reset, which
prevents the drivers unloading.
Tracking mei_me/txe modules on mei client bus via
mei_cldev_enable/disable is error prone due to possible internal
reset flow, where clients are disconnected underneath.
Moving reference counting to probe and release of mei bus client
driver solves this issue in simplest way, as each client provides only
a single connection to a client bus driver.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver can't read/write from i2c if the device is in reset or
disabled. Therefore, return -EBUSY in those cases instead of 0.
This change also fixes a smatch warning about uninitialized variable.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mei hdcp driver is designed as component slave for the I915 component
master.
v2: Rebased.
v3:
Notifier chain is adopted for cldev state update [Tomas]
v4:
Made static dummy functions as inline in mei_hdcp.h
API for polling client device status
IS_ENABLED used in header, for config status for mei_hdcp.
v5:
Replacing the notifier with component framework. [Daniel]
v6:
Rebased on the I915 comp master redesign.
v7:
mei_hdcp_component_registered is made static [Uma]
Need for global static variable mei_cldev is removed.
v8:
master comp is added to be matched with i915 subcomponent [daniel]
v9:
only comp_master is set and retrieved as driver_data [Daniel]
Reviewed-by Daniel.
v10:
small corrections at probe [Tomas]
v11:
bind and unbind logs are made as debug logs [Tomas]
cldev_enable failure is handled [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-16-git-send-email-ramalingam.c@intel.com
Request the ME to terminate the HDCP2.2 session for a port.
On Success, ME FW will mark the intel port as Deauthenticated and
terminate the wired HDCP2.2 Tx session started due to the cmd
WIRED_INITIATE_HDCP2_SESSION.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style and typos fixed [Uma]
v5:
Extra line is removed.
v6:
Collected the Rb-ed by.
Rebased.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition.[Tomas]
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-15-git-send-email-ramalingam.c@intel.com
Request to ME to configure a port as authenticated.
On Success, ME FW will mark the port as authenticated and provides
HDCP cipher with the encryption keys.
Enabling the Authentication can be requested once all stages of
HDCP2.2 authentication is completed by interacting with ME FW.
Only after this stage, driver can enable the HDCP encryption for
the port, through HW registers.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style and typos fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebased.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-14-git-send-email-ramalingam.c@intel.com
Request to ME to verify the M_Prime received from the HDCP sink.
ME FW will calculate the M and compare with M_prime received
as part of RepeaterAuth_Stream_Ready, which is HDCP2.2 protocol msg.
On successful completion of this stage, downstream propagation of
the stream management info is completed.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
endianness conversion func is moved to drm_hdcp.h [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
drm_hdcp2_u32_to_seq_num() is used for u32 to seq_num.
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
%s/__swab16/cpu_to_be16 [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-13-git-send-email-ramalingam.c@intel.com
Request ME to verify the downstream topology information received.
ME FW will validate the Repeaters receiver id list and
downstream topology.
On Success ME FW will provide the Least Significant
128bits of VPrime, which forms the repeater ack.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style and typos fixed [Uma]
v5: Rebased.
v6: Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-12-git-send-email-ramalingam.c@intel.com
Request to ME to prepare the encrypted session key.
On Success, ME provides Encrypted session key. Function populates
the HDCP2.2 authentication msg SKE_Send_Eks.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-11-git-send-email-ramalingam.c@intel.com
Request to ME to verify the LPrime received from HDCP sink.
On Success, ME FW will verify the received Lprime by calculating and
comparing with L.
This represents the completion of Locality Check.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
memcpy for const length.
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-10-git-send-email-ramalingam.c@intel.com
Requests ME to start the second stage of HDCP2.2 authentication,
called Locality Check.
On Success, ME FW will provide LC_Init message to send to hdcp sink.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd used for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-9-git-send-email-ramalingam.c@intel.com
Provides Pairing info to ME to store.
Pairing is a process to fast track the subsequent authentication
with the same HDCP sink.
On Success, received HDCP pairing info is stored in non-volatile
memory of ME.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
memcpy for const length.
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-8-git-send-email-ramalingam.c@intel.com
Requests for the verification of AKE_Send_H_prime.
ME will calculate the H and comparing it with received H_Prime.
The result will be returned as status.
Here AKE_Send_H_prime is a HDCP2.2 Authentication msg.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Styles and typos fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc Addition [Tomas]
memcpy for const length.
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
K-Doc fix. [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-7-git-send-email-ramalingam.c@intel.com
Requests for verification for receiver certification and also the
preparation for next AKE auth message with km.
On Success ME FW validate the HDCP2.2 receivers certificate and do the
revocation check on the receiver ID. AKE_Stored_Km will be prepared if
the receiver is already paired, else AKE_No_Stored_Km will be prepared.
Here AKE_Stored_Km and AKE_No_Stored_Km are HDCP2.2 protocol msgs.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd is used for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc Addition. [Tomas]
memcpy for const length.
v9:
renamed func as mei_hdcp_* [Tomas]
Inline function is defined for DDI index [Tomas]
v10:
Fixed the conversion of u8 to bool [Tomas]
K-Doc fix [Tomas]
v11:
Rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-6-git-send-email-ramalingam.c@intel.com
Request ME FW to start the HDCP2.2 session for an intel port.
Prepares payloads for command WIRED_INITIATE_HDCP2_SESSION and sends
to ME FW.
On Success, ME FW will start a HDCP2.2 session for the port and
provides the content for HDCP2.2 AKE_Init message.
v2: Rebased.
v3:
cldev is add as a separate parameter [Tomas]
Redundant comment and typecast are removed [Tomas]
v4:
%zd is used for size [Alexander]
%s/return -1/return -EIO [Alexander]
Spellings in commit msg is fixed [Uma]
v5: Rebased.
v6:
Collected the rb-ed by.
Realigning the patches in the series.
v7:
Adjust to the new mei interface.
Fix for kdoc.
v8:
K-Doc Addition.
memcpy for const length.
v9:
s/mei_hdcp_ddi/mei_fw_ddi
s/i915_port/mei_i915_port [Tomas]
renamed func as mei_hdcp_* [Tomas]
Instead of macro, inline func for ddi index is used. [Tomas]
v10:
Switch case for the coversion between i915_port to mei_ddi [Tomas]
Kernel doc fix.
v11:
mei_hdcp_ops is defined as const. [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550772730-23280-5-git-send-email-ramalingam.c@intel.com
Oded Gabbay