Since the twl-core has been converted to use regmap it is no longer needed
to allocate bigger buffer for data when writing to twl.
CC: Grant Likely <grant.likely@secretlab.ca>
CC: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Remove the custom code to do I/O and replace it with standard regmap calls.
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The twl6030-pwm driver is going to be deleted since it was only able to
control the Charging indicator LED on the twl6030 PMIC.
The new set of drivers are going to provide support for both PWMs and PWM
driven LED outputs on TWL4030 and TWL6030 PMICs.
The twl-pwm driver will handle the PWMs (2 instance) while the twl-pwmled
driver is to control the two LED instance on TWL4030 and to charging
indicator LED (1 instance) on TWL6030.
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
twl4030-madc driver can only handle twl4030 class MADC. The newer revisions
of twl does not have MADC, instead they have different IP called GPADC which
is not backward compatible.
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Retu is a multi-function device found on Nokia Internet Tablets
implementing at least watchdog, RTC, headset detection and power button
functionality.
This patch implements minimum functionality providing register access,
IRQ handling and power off functions.
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
They contain documented status readback fields.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Set tps65217 PMIC status to OFF if power enable toggle is supported.
By setting this bit to 1 to enter PMIC to OFF state when PWR_EN pin
is pulled low. Also adds a DT flag to specify that device pmic
supports shutdown control or not.
Signed-off-by: Colin Foe-Parker <colin.foeparker@logicpd.com>
[anilkumar@ti.com: move the additions to tps65217 MFD driver]
Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This fixes the following build error on some architectures (parisc at least):
drivers/mmc/host/rtsx_pci_sdmmc.c: In function 'sd_normal_rw':
drivers/mmc/host/rtsx_pci_sdmmc.c:448:2: error: implicit
declaration of function 'kzalloc'
[-Werror=implicit-function-declaration]
drivers/mmc/host/rtsx_pci_sdmmc.c:448:6: warning: assignment
makes pointer from integer without a cast [enabled by default]
drivers/mmc/host/rtsx_pci_sdmmc.c:472:2: error: implicit
declaration of function 'kfree'
[-Werror=implicit-function-declaration]
Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
For Realtek card reader, internal regsiter SD_CFG2 should be configured
before transferring data.
The default value of SD_CFG2 is proper for writing data. But for reading
sequence, the timing is not good enough. So in some extreme circumstance,
card reader may sample the response data from the card as good even if
the data is wrong. And this will cause the bad consequence.
In the prior version, the value of this register has been calculated,
but forgotten to write back to the internal register.
Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Use the regmap irq framework for implementing TPS65090 interrupt
support in place of implementing it locally.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Since tps65090 register is accessed via regmap, moving
the register access APIs to header and making it as inline.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Remove unused member from tps65090 data structure as
these are not used.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Add error prints when memory allocation failed for
tps65090 data. Also cleanups the melloc arguments.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
TPS65090 supports the battery charging and hence adding
the device name in the list of TPS65090 children. Also
remove the tps65090-regulator as it duplicates with
tps65090-pmic for regulator driver.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
TPS80031/ TPS80032 Fully Integrated Power Management with Power
Path and Battery Charger. The device provides five configurable
step-down converters, 11 general purpose LDOs, USB OTG Module,
ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
Power Path from USB, 32K clock generator.
Add the mfd core driver for TPS80031/TPS80032.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The DSP memories are mapped into the register map, make them readable and
writable by updating max_register appropriately.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
These are required for the clock infrastructure code to properly configure
and control the sta2x11 PLLs.
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The lock is used to implement atomic operations on each platform
device's registers, so it looks reasonable having one lock per
device instead of one common lock for all the devices belonging
to the same sta2x11 instance.
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The gpio platform driver will take care of its platform data,
let's not do any checks here.
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The pci probe method is called twice now, so we have to call
sta2x11_mfd_add() only once to avoid a -EBUSY error.
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Since there are now many sta2x11-mfd platform devices, using defines
for their names looks like a better solution.
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
A couple of predefined clocks (mux and gated) need to be
initialized with the virtual address of the clock's controlling
register and the address of a spinlock used to protect against
races.
This function exports such data for all the mfd cells.
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
A driver for the apb-soc registers is needed by the clock
infrastructure code to configure and control clocks on the sta2x11
chip.
Since some of the functions in sta2x11-mfd.c were almost identical
for the two existing platform devices, the following changes
have been performed to avoid further code duplication while
adding the apb-soc-regs driver:
* The sctl_regs and apbreg_regs fields in struct sta2x11_mfd
have been turned into just one array of pointers accessed by
device index.
* Platform probe methods have become one-liners invoking a
common probe with the device's index as second parameter.
* For loops have been inserted where the same operations
were performed for each of the two bars of a pci device.
* The apbreg_mask and sctl_mask functions were almost identical,
so they were turned into inline functions invoking a common
__sta2x11_mfd_mask() with the platform device's index as last
parameter. To do this, enum sta2x11_mfd_plat_dev has been declared in
sta2x11-mfd.h and more device types have been added to it.
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This adds the mfd cell to use the adc part of the Nano River Technologies
viperboard.
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This adds the mfd cell to use the i2c part of the Nano River Technologies
viperboard as i2c master.
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This adds the mfd cell to use the gpio a and gpio b part
of the Nano River Technologies viperboard.
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Add mfd driver for Nano River Technologies viperboard.
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
mfd_remove_devices would iterate over all devices sharing a parent with
an mfd device regardless of whether they were allocated by the mfd core
or not. This especially caused problems when the device structure was
not contained within a platform_device, because to_platform_device is
used on each device pointer.
This patch defines a device_type for mfd devices and checks this is
present from mfd_remove_devices_fn before processing the device.
Cc: stable@vger.kernel.org
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Peter Tyser <ptyser@xes-inc.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Convert to the new da9052 interrupt functions, so that we can get rid of
irq_base references.
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Convert to the new da9052 interrupt functions, so that we can get rid of
irq_base references.
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Use the new da9052 irq functions and allow the driver to probe successfully.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: <linux-input@vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Currently da9062_tsi does not probe and it fails as follows:
da9052 1-0048: Unable to determine device interrupts
Use the new da9052 irq functions and allow the driver to probe and operate
correctly.
Tested on mx53qsb board using 'evtest' tool.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: <linux-input@vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Create a da9052-irq.c file so that it can handle interrupt related functions.
This is useful for allowing the da9052 drivers to use such functions
when dealing with da9052 interrupts.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
On a mx53qsb dt-kernel the da9052-core driver fails to probe as follows:
da9052 1-0048: DA9052 ADC IRQ failed ret=-22
The reason for the error was due to passing only the offset as the interrupt
number in request_threaded_irq() without da9052->irq_base.
The recommended approach though is to use regmap_get_virq() to acquire the
interrupt number and this allows to get rid of da9052->irq_base.
Fix it and allow the driver to probe successfully.
Also provide a few more error logs and change the irq string to "adc-irq", so
that it appears as a single word in 'cat /proc/interrupts'
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
When adding the sub device "tps65910-rtc", is it passed the
IO resource IRQ for the interrupt number. This interrupt needs
to map in the device irq domain. Pass the irq domain of device
in mfd_add_devices() so that proper irq mapping can be done when
adding the sub device RTC.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In place of implementing the irq support in separate file,
moving implementation to main mfd file.
The irq files only contains the table and init steps only
and does not need extra file to have this only for this
purpose.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Implement irq support of tps65910 with regmap irq framework
in place of implementing locally.
This reduces the code size significantly and easy to maintain.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Add sub devices of tps65910 after all initialization like interrupt,
clock etc. is done. This will make sure that require data gets
initialized properly before sub devices probe's get called.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Allow maps to replace the lock function for integration with dynamic
register accessability states.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=KWk0
-----END PGP SIGNATURE-----
Merge tag 'lock' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into for-next
regmap: Customisable lock functions
Allow maps to replace the lock function for integration with dynamic
register accessability states.
The TPS6586x adds the interrupt of this device using
linear mapping on irq domain.
Hence, implement gpio_to_irq to get the irq number
corresponding to TPS6586x GPIOs which is created
dynamically.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Add IRQ IORESOURCE for rtc sub driver of this device.
The rtc driver can get the irq by calling platform_get_irq().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Allocate the irq base if it base is not porvided i.e.
in case of device tree invocation of this driver.
Convert the tps6586x driver to irq domain, using a
legacy IRQ mapping if an irq_base is specified in
platform data or dynamically allocated and otherwise
using a linear mapping.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
After the regmap_irq conversion there is no need to call the driver
as twl6040-core.c since there is only one c file remained.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
