This reverts commit 28694e009e.
The commit causes multiple issues in that:
- the added call to ->control does potentially run unclocked
causing a hang of the machine
- the added pinctrl-states are undocumented in the binding
- the added pinctrl-states are not backwards compatible, breaking
old devicetrees.
Fixes: 28694e009e ("thermal: rockchip: fix up the tsadc pinctrl setting error")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reported-by: kernelci.org bot <bot@kernelci.org>
Reported-by: Enric Balletbo Serra <eballetbo@gmail.com>
Reported-by: Vicente Bergas <vicencb@gmail.com>
Reported-by: Jack Mitchell <ml@embed.me.uk>
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Syntax update only -- no logical or functional change.
In response to the new multi-die/package changes, update variable names to
use the more generic thermal "zone" terminology, instead of "package", as
the zones can refer to either packages or die.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lkml.kernel.org/r/b65494a76be13481dc3a809c75debb2574c34eda.1557769318.git.len.brown@intel.com
Package temperature sensors are actually implemented in hardware per-die.
Thus, the new multi-die/package systems sport mulitple package thermal
zones for each package.
Update the x86_pkg_temp_thermal to be "multi-die-aware", so it can expose
multiple zones per package, instead of just one.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/281695c854d38d3bdec803480c3049c36198ca44.1557769318.git.len.brown@intel.com
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull thermal management updates from Zhang Rui:
- Remove the 'module' Kconfig option for thermal subsystem framework
because the thermal framework are required to be ready as early as
possible to avoid overheat at boot time (Daniel Lezcano)
- Fix a bug that thermal framework pokes disabled thermal zones upon
resume (Wei Wang)
- A couple of cleanups and trivial fixes on int340x thermal drivers
(Srinivas Pandruvada, Zhang Rui, Sumeet Pawnikar)
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
drivers: thermal: processor_thermal: Downgrade error message
mlxsw: Remove obsolete dependency on THERMAL=m
hwmon/drivers/core: Simplify complex dependency
thermal/drivers/core: Fix typo in the option name
thermal/drivers/core: Remove depends on THERMAL in Kconfig
thermal/drivers/core: Remove module unload code
thermal/drivers/core: Remove the module Kconfig's option
thermal: core: skip update disabled thermal zones after suspend
thermal: make device_register's type argument const
thermal: intel: int340x: processor_thermal_device: simplify to get driver data
thermal/int3403_thermal: favor _TMP instead of PTYP
Pull thermal soc updates from Eduardo Valentin:
- thermal core has a new devm_* API for registering cooling devices. I
took the entire series, that is why you see changes on drivers/hwmon
in this pull (Guenter Roeck)
- rockchip thermal driver gains support to PX30 SoC (Elaine Zhang)
- the generic-adc thermal driver now considers the lookup table DT
property as optional (Jean-Francois Dagenais)
- Refactoring of tsens thermal driver (Amit Kucheria)
- Cleanups on cpu cooling driver (Daniel Lezcano)
- broadcom thermal driver dropped support to ACPI (Srinath Mannam)
- tegra thermal driver gains support to OC hw throttle and GPU throtle
(Wei Ni)
- Fixes in several thermal drivers.
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (59 commits)
hwmon: (pwm-fan) Use devm_thermal_of_cooling_device_register
hwmon: (npcm750-pwm-fan) Use devm_thermal_of_cooling_device_register
hwmon: (mlxreg-fan) Use devm_thermal_of_cooling_device_register
hwmon: (gpio-fan) Use devm_thermal_of_cooling_device_register
hwmon: (aspeed-pwm-tacho) Use devm_thermal_of_cooling_device_register
thermal: rcar_gen3_thermal: Fix to show correct trip points number
thermal: rcar_thermal: update calculation formula for R-Car Gen3 SoCs
thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power
thermal: rockchip: Support the PX30 SoC in thermal driver
dt-bindings: rockchip-thermal: Support the PX30 SoC compatible
thermal: rockchip: fix up the tsadc pinctrl setting error
thermal: broadcom: Remove ACPI support
thermal: Fix build error of missing devm_ioremap_resource on UM
thermal/drivers/cpu_cooling: Remove pointless field
thermal/drivers/cpu_cooling: Add Software Package Data Exchange (SPDX)
thermal/drivers/cpu_cooling: Fixup the header and copyright
thermal/drivers/cpu_cooling: Remove pointless test in power2state()
thermal: rcar_gen3_thermal: disable interrupt in .remove
thermal: rcar_gen3_thermal: fix interrupt type
thermal: Introduce devm_thermal_of_cooling_device_register
...
Currently after store trip points number in 'ret', it is overwritten
afterwards, this cause incorrect trip point number always be shown in
the debug information after register of each thermal zone.
This patch fix this issue by moving get of trip number to
end of thermal zone registration.
Fixes: 6269e9f790 ("thermal: rcar_gen3_thermal: Register hwmon sysfs interface")
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Update calculation for the R-Car Gen3 and RZ/G2 SoCs which have a
thermal IP block controlled by this driver. That is the:
* R-Car D3 (r8a77995)
* R-Car E2 (r8a77990)
* R-Car V3M (r8a77970)
* RZ/G2E (r8a774c0)
The calculation update is as documented in the R-Car Gen3 User's Manual,
v1.50 Nov 2018:
- When CTEMP is less than 24
T = CTEMP[5:0] * 5.5 - 72
- When CTEMP is equal to/greater than 24
T = CTEMP[5:0] * 5 - 60
This was inspired by a patch in the BSP by Van Do <van.do.xw@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The CPU load values passed to the thermal_power_cpu_get_power
tracepoint are zero for all CPUs, unless, unless the
thermal_power_cpu_limit tracepoint is enabled too:
irq/41-rockchip-98 [000] .... 290.972410: thermal_power_cpu_get_power:
cpus=0000000f freq=1800000 load={{0x0,0x0,0x0,0x0}} dynamic_power=4815
vs
irq/41-rockchip-96 [000] .... 95.773585: thermal_power_cpu_get_power:
cpus=0000000f freq=1800000 load={{0x56,0x64,0x64,0x5e}} dynamic_power=4959
irq/41-rockchip-96 [000] .... 95.773596: thermal_power_cpu_limit:
cpus=0000000f freq=408000 cdev_state=10 power=416
There seems to be no good reason for omitting the CPU load information
depending on another tracepoint. My guess is that the intention was to
check whether thermal_power_cpu_get_power is (still) enabled, however
'load_cpu != NULL' already indicates that it was at least enabled when
cpufreq_get_requested_power() was entered, there seems little gain
from omitting the assignment if the tracepoint was just disabled, so
just remove the check.
Fixes: 6828a4711f ("thermal: add trace events to the power allocator governor")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Javi Merino <javi.merino@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
PX30 SOC has two Temperature Sensors for CPU and GPU.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Explicitly use the pinctrl to set/unset the right mode
instead of relying on the pinctrl init mode.
And it requires setting the tshut polarity before select pinctrl.
When the temperature sensor mode is set to 0, it will automatically
reset the board via the Clock-Reset-Unit (CRU) if the over temperature
threshold is reached. However, when the pinctrl initializes, it does a
transition to "otp_out" which may lead the SoC restart all the time.
"otp_out" IO may be connected to the RESET circuit on the hardware.
If the IO is in the wrong state, it will trigger RESET.
(similar to the effect of pressing the RESET button)
which will cause the soc to restart all the time.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Unlike DT framework, thermal-zones and its parameters can't be parsed
using ACPI framework. So that ACPI support is removed in this driver.
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reported-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The devres.o gets linked if HAS_IOMEM is present so on ARCH=um
allyesconfig (COMPILE_TEST) failed on many files with:
drivers/thermal/thermal_mmio.o:
In function 'thermal_mmio_probe':thermal_mmio.c:(.text+0xe1):
undefined reference to `devm_ioremap_resource'
The users of devm_ioremap_resource() which are compile-testable
should depend on HAS_IOMEM.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Talel Shenhar <talel@amazon.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The structure cpufreq_cooling_device provides a backpointer to the thermal
device but this one is used for a trace and to unregister. For the trace,
we don't really need this field and the unregister function as the same
pointer passed as parameter. Remove it.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The copyright format does not conform to the format requested by
Linaro: https://wiki.linaro.org/Copyright
Fix it.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
When the static power computation was removed, the test with the power
being negative was not removed. However, the substraction which was
responsible of the negative value was removed and the variable is now
an u32. A double reason to remove the test which does not make sense.
Fixes: 84fe2cab48 ("cpu_cooling: Drop static-power related stuff")
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Currently IRQ remains enabled after .remove, later if device is probed,
IRQ is requested before .thermal_init, this may cause IRQ function be
called before device is initialized.
this patch disables interrupt in .remove, to ensure irq function
only be called after device is fully initialized.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Currently IRQF_SHARED type interrupt line is allocated, but it
is not appropriate, as the interrupt line isn't shared between
different devices, instead IRQF_ONESHOT is the proper type.
By changing interrupt type to IRQF_ONESHOT, now irq handler is
no longer needed, as clear of interrupt status can be done in
threaded interrupt context.
Because IRQF_ONESHOT type interrupt line is kept disabled until
the threaded handler has been run, so there is no need to protect
read/write of REG_GEN3_IRQSTR with lock.
Fixes: 7d4b269776 ("enable hardware interrupts for trip points")
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
thermal_of_cooling_device_register() and thermal_cooling_device_register()
are typically called from driver probe functions, and
thermal_cooling_device_unregister() is called from remove functions. This
makes both a perfect candidate for device managed functions.
Introduce devm_thermal_of_cooling_device_register(). This function can
also be used to replace thermal_cooling_device_register() by passing a NULL
pointer as device node. The new function requires both struct device *
and struct device_node * as parameters since the struct device_node *
parameter is not always identical to dev->of_node.
Don't introduce a device managed remove function since it is not needed
at this point.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Certain ADC channels, such as the xilinx-ams temperature channels, give
milliCelcius already when read with iio_read_channel_processed.
Rather than having to provide a 1:1 dummy lookup table, simply allow to
bypass the mechanism.
Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
It's impossible to use this driver outside of Device Tree, so if the
probe function is called, the dev.of_node is guaranteed to not be NULL
and guarding against that is pointless. Drop it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
This is a generic thermal driver for simple MMIO sensors, of which
amazon,al-thermal is one.
This device uses a single MMIO transaction to read the temperature and
report it to the thermal subsystem.
Signed-off-by: Talel Shenhar <talel@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Fix setting value for IRQCTL register. We are setting the last 6 bits
of (IRQCTL) to be 1 (0x3f), this is only suitable for H3ES1.*, according
to Hardware manual values 1 are "setting prohibited" for Gen3.
Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
This will allow calibration routines to correctly include the constants
from anywhere and allow more code sharing.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
qcs404 has a single TSENS IP block with 10 sensors. It uses version 1.4
of the TSENS IP, functionality for which is encapsulated inside the
qcom,tsens-v1 compatible.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
get_temp() learns to return temperature regardless of whether it is
returned as ADC code or direct temperature.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Just rename the function and move it to allow code sharing with future
versions of TSENS IP
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The current implementation is based on an algorithm published in the
docs. Instead of reading the temperature thrice w/o any explanation,
improve the algorithm.
This will become the basis for a common get_temp routine in the future.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The IP can support 'm' sensors while the platform can enable 'n' sensors
of the 'm' where n <= m.
Track maximum sensors supported by the IP so that we can correctly track
what subset of the sensors are supported on the platform.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The IDs cannot be negative, fix the data type.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
is_sensor_enabled() checks if the sensors are enabled on this platform.
It is possible that the SoC might choose not to enable all the sensors
that the IP block is capable of supporting.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
We print a calibration failure message on -EPROBE_DEFER from
nvmem/qfprom as follows:
[ 3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4
[ 3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed
[ 3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4
This confuses people when, in fact, calibration succeeds later when
nvmem/qfprom device is available. Don't print this message on a
-EPROBE_DEFER.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
As we add support for newer versions of the TSENS IP, the current
approach isn't scaling because registers and bitfields get moved around,
requiring platform-specific hacks in the code. By moving to regmap, we
can hide the register level differences away from the code.
Define a common set of registers and bit-fields that we care about
across the various tsens IP versions.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
8974 and 8916 have the same version of the TSENS IP. Merge the files to
allow for better code reuse.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Some #defines in tsens-v_0_1.c clash with those in tsens-8974.c. Prefix
them with 8916 to avoid the clash so we can merge the two files.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
8916 and 8974 use v0.1.0 of the TSENS IP. Rename tsens-8916 to prepare
it for merging with tsens-8974 in a later commit.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
check_patch complains a lot as follows:
WARNING: function definition argument 'struct tsens_priv *' should also have an identifier name
+ int (*init)(struct tsens_priv *);
Fix it.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
tsens_get_temp() uses the name 'data' for the void pointer, use the same
in tsens_get_trend() for consistency.
Remove a stray space while we're at it.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
tmdev seems to imply that this is a device pointer when in fact it is
just private platform data for each tsens device. Rename it to priv
improve code readability.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Rename to tsens_priv to denote that it is private data for each tsens
instance.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Rename to tsens_plat_data to denote that it is platform-data passed in
at compile-time.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Describe how the TSENS device and the various sensors connected to it
are described in the driver
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Formatting of Kconfig files doesn't look so pretty, so just
take damp cloth and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Define pr_fmt macro to add a prefix to the message,
this can make the thermal log better recognized.
Before:
[ 0.602672] nfc: nfc_init: NFC Core ver 0.1
[ 0.602828] NET: Registered protocol family 39
[ 0.603435] clocksource: Switched to clocksource mct-frc
[ 0.746216] failed to build thermal zone cpu-thermal: -22
[ 0.746451] NET: Registered protocol family 2
After:
[ 0.602804] NET: Registered protocol family 39
[ 0.603463] clocksource: Switched to clocksource mct-frc
[ 0.746309] thermal_sys: failed to build thermal zone cpu-thermal: -22
[ 0.746545] NET: Registered protocol family 2
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Parse Over Current settings from DT and program them to
generate interrupts. Also enable hw throttling whenever
there are OC events. Log the OC events as debug messages.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Add support to generate OC (over-current) interrupts to
indicate the OC event and print out alarm messages.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Support to generate an interrupt when the temperature
crosses a programmed threshold and notify the thermal framework.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Add support to trigger pulse skippers on the GPU
when a HOT trip point is triggered. The pulse skippers
can be signalled to throttle at low, medium and high
depths\levels.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Currently the critical trip points in thermal framework are the only
way to specify a temperature at which HW should shutdown. This is
insufficient for certain platforms which would want an orderly
software shutdown in addition to HW shutdown.
This change support to parse "nvidia, thermtrips" property,
it allows soctherm DT to specify thermtrip temperatures so that
critical trip points framework can be used for doing software
shutdown.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Downgrade "Unsupported event" message from dev_err to dev_dbg. Otherwise it
floods with this message one some platforms.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Unlike the other options, the cpu cooling option is beginning
with a lowercase letter, changing to a uppercase.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
The dependency on the THERMAL option to be set is already there implicitly
by the "if THERMAL" conditionnal option. The sub Kconfigs do not have to
check against the THERMAL option as they are called from a Kconfig block
which is enabled by the conditionnal option.
Remove the useless "depends on THERMAL" in the Kconfigs.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Now the thermal core is no longer compiled as a module. Remove the
unloading module code and move the unregister function to the __init
section.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
The module support for the thermal subsystem makes little sense:
- some subsystems relying on it are not modules, thus forcing the
framework to be compiled in
- it is compiled in for almost every configs, the remaining ones
are a few platforms where I don't see why we can not switch the thermal
to 'y'. The drivers can stay in tristate.
- platforms need the thermal to be ready as soon as possible at boot time
in order to mitigate
Usually the subsystems framework are compiled-in and the plugs are as
module.
Remove the module option. The removal of the module related dead code will
come after this patch gets in or is acked.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Guenter Roeck <groeck@chromium.org>
For mini2440:
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS part
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
It is unnecessary to update disabled thermal zones post suspend and
sometimes leads error/warning in bad behaved thermal drivers.
Signed-off-by: Wei Wang <wvw@google.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
...because it can be, the buffer is strlcpy'd into a local buffer in a
thermal struct member.
Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
This simplifies getting the 'driver_data' from 'struct device' directly.
Going through platform_device or pci_dev is not required. Also removes
condition check as the private data stored with dev pointer, means
irrespective of enumeration mode, we can use dev_get_drvdata().
This removes the unnecessary step back and forth.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
ACPICA commit 24870bd9e73d71e2a1ff0a1e94519f8f8409e57d
ACPI_NAME_SIZE changed to ACPI_NAMESEG_SIZE
This clarifies that this is the length of an individual
nameseg, not the length of a generic namestring/namepath.
Improves understanding of the code.
Link: https://github.com/acpica/acpica/commit/24870bd9
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
kthread name only allows 15 characters (TASK_COMMON_LEN is 16).
Thus rename the kthreads created by intel_powerclamp driver from
"kidle_inject/ + decimal cpuid" to "kidle_inj/ + decimal cpuid"
to avoid truncated kthead name for cpu 100 and later.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
The mtk_thermal struct contains a 'struct mtk_thermal_bank banks[];',
but the allocation only allocates sizeof(struct mtk_thermal) bytes,
which cause out of bound access with the ->banks[] member. Change it to
a fixed size array instead.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
int3400 only pushes the UUID into the firmware when the mode is flipped
to "enable". The current code only exposes the mode flag if the firmware
supports the PASSIVE_1 UUID, which not all machines do. Remove the
restriction.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Add more supported DPTF policies than the driver currently exposes.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Cc: Nisha Aram <nisha.aram@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
"cat /sys/kernel/debug/bcm2835_thermal/regset" causes a NULL pointer
dereference in bcm2835_thermal_debugfs. The driver makes use of the
implementation details of the thermal framework to retrieve a pointer
to its private data from a struct thermal_zone_device, and gets it
wrong - leading to the crash. Instead, store its private data as the
drvdata and retrieve the thermal_zone_device pointer from it.
Fixes: bcb7dd9ef2 ("thermal: bcm2835: add thermal driver for bcm2835 SoC")
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Merge commit 19785cf93b ("Merge branch 'linus' of
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal")
broke the code introduced by commit ffe6e16f14 ("thermal: exynos: Reduce
severity of too early temperature read"). Restore the original code from
the mentioned commit to finally fix the warning message during boot:
thermal thermal_zone0: failed to read out thermal zone (-22)
Reported-by: Marian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 19785cf93b ("Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal")
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
This variable is declared as:
static struct powerclamp_worker_data * __percpu worker_data;
In other words, a percpu pointer to struct ...
But this variable not used like so but as a pointer to a percpu
struct powerclamp_worker_data.
So fix the declaration as:
static struct powerclamp_worker_data __percpu *worker_data;
This also quiets Sparse's warnings from __verify_pcpu_ptr(), like:
494:49: warning: incorrect type in initializer (different address spaces)
494:49: expected void const [noderef] <asn:3> *__vpp_verify
494:49: got struct powerclamp_worker_data *
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Pull thermal soc updates from Eduardo Valentin:
"Specifics:
- mediatek thermal now supports MT8183
- broadcom thermal now supports Stingray
- qoirq now supports multiple sensors
- fixes on different drivers: rcar, tsens, tegra
Some new drivers are still pending further review and I chose to leave
them for the next merge window while still sending this material"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: rcar_gen3_thermal: Register hwmon sysfs interface
thermal/qcom/tsens-common : fix possible object reference leak
thermal: tegra: add get_trend ops
thermal: tegra: fix memory allocation
thermal: tegra: remove unnecessary warnings
thermal: mediatek: add support for MT8183
dt-bindings: thermal: add binding document for mt8183 thermal controller
thermal: mediatek: add flag for bank selection
thermal: mediatek: add thermal controller offset
thermal: mediatek: add calibration item
thermal: mediatek: add common index of vts settings.
thermal: mediatek: fix register index error
thermal: qoriq: add multiple sensors support
thermal: broadcom: Add Stingray thermal driver
dt-bindings: thermal: Add binding document for SR thermal
Register the hwmon sysfs interface on R-Car Gen3 thermal driver to
align it with Gen2 driver. Use devm_add_action() to unregister the
hwmon interface automatically.
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: linux-renesas-soc@vger.kernel.org
To: linux-pm@vger.kernel.org
From: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
of_find_device_by_node() takes a reference to the struct device
when it finds a match via get_device.
We also should make sure to drop the reference to the device
taken by of_find_device_by_node() when returning error.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Add support for get_trend ops that allows soctherm
sensors to be used with the step-wise governor.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Fix memory allocation to store the pointers to
thermal_zone_device.
Signed-off-by: Wei Ni <wni@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Convert warnings to info as not all platforms may
have all the thresholds and sensors enabled.
Signed-off-by: Wei Ni <wni@nvidia.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
MT8183 has two built-in thermal controllers with total six thermal
sensors. And it doesn't have bank, so doesn't need to select bank.
This patch adds support for mt8183.
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
For past ic designs, the thermal controller should select banks before
reading the thermal sensor.
And the new ic design architecture removes this mechanism.
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
One thermal controller can read four sensors at most,
so we need to add controller_offset for the project with
more than four sensors to reuse the same register settings.
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Add calibration item in thermal_data to support
the project with different calibration coefficient.
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Each project has different number of vts settings.
For the MT2701 just have to set three vts, but the
original code flow add five unnecessary vts.
Add common index of vts settings for scalablity,
and reduce the setting of unnecessary vts.
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The index of msr and adcpnp should match the sensor
which belongs to the selected bank in the for loop.
Fixes: b7cf005373 ("thermal: Add Mediatek thermal driver for mt2701.")
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The QorIQ Layerscape SoC has several thermal sensors but the current
driver only supports one.
Massage the code to be sensor oriented and allow the support for
multiple sensors.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Stingray SoC has six temperature sensor and those are
configured, controlled and accessed to read temperature
and update in DDR memory using m0 firmware.
All six sensors has been given 4 bytes of memory in DDR
to write temperature in millivolts.
This thermal driver read temperature values from DDR
because no direct access to sensors.
Like this all temparature sensors are monitored and
trips at critical temperature.
If driver can't handle thermal runaways because of
any unknown reason, then firmware in m0 Processor
will handle.
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Vikram Prakash <vikram.prakash@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Make it clear that it is a failure if the cpufreq driver was unable to
register as a cooling device. Makes it easier to find in logs and
grepping for words like fail, err, warn.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Make it easier to debug devicetree definition in case of errors.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The CPU cooling driver (cpu_cooling.c) allows the platform's cpufreq
driver to register as a cooling device and cool down the platform by
throttling the CPU frequency. In order to be able to auto-register a
cpufreq driver as a cooling device from the cpufreq core, we need access
to code inside cpu_cooling.c which, in turn, accesses code inside
thermal core.
CPU_FREQ is a bool while THERMAL is tristate. In some configurations
(e.g. allmodconfig), CONFIG_THERMAL ends up as a module while
CONFIG_CPU_FREQ is compiled in. This leads to following error:
drivers/cpufreq/cpufreq.o: In function `cpufreq_offline':
cpufreq.c:(.text+0x407c): undefined reference to `cpufreq_cooling_unregister'
drivers/cpufreq/cpufreq.o: In function `cpufreq_online':
cpufreq.c:(.text+0x70c0): undefined reference to `of_cpufreq_cooling_register'
Given that platforms using CPU_THERMAL usually want it compiled-in so it
is available early in boot, make CPU_THERMAL depend on THERMAL being
compiled-in instead of allowing it to be a module.
As a result of this change, get rid of the ugly (!CPU_THERMAL ||
THERMAL) dependency in all cpufreq drivers using CPU_THERMAL.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull thermal management fixes from Zhang Rui:
- Fix a race condition that sysfs could be accessed before necessary
initialization in int340x thermal driver. (Aaron Hill)
- Fix a NULL vs IS_ERR() check in int340x thermal driver. (Dan
Carpenter)
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
drivers: thermal: int340x_thermal: Fix sysfs race condition
thermal: int340x_thermal: Fix a NULL vs IS_ERR() check
Changes since V1:
* Use dev_info instead of printk
* Use dev_warn instead of BUG_ON
Previously, sysfs_create_group was called before all initialization had
fully run - specifically, before pci_set_drvdata was called. Since the
sysctl group is visible to userspace as soon as sysfs_create_group
returns, a small window of time existed during which a process could read
from an uninitialized/partially-initialized device.
This commit moves the creation of the sysctl group to after all
initialized is completed. This ensures that it's impossible for
userspace to read from a sysctl file before initialization has fully
completed.
To catch any future regressions, I've added a check to ensure
that proc_thermal_emum_mode is never PROC_THERMAL_NONE when a process
tries to read from a sysctl file. Previously, the aforementioned race
condition could result in the 'else' branch
running while PROC_THERMAL_NONE was set,
leading to a null pointer deference.
Signed-off-by: Aaron Hill <aa1ronham@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
After commit 5d32a66541 (PCI/ACPI: Allow ACPI to be built without
CONFIG_PCI set) dependencies on CONFIG_PCI that previously were
satisfied implicitly through dependencies on CONFIG_ACPI have to be
specified directly.
IOSF_CORE depends on PCI. For this reason, add a direct dependency on
CONFIG_PCI.
Fixes: 5d32a66541 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull thermal management updates from Zhang Rui:
- Add locking for cooling device sysfs attribute in case the cooling
device state is changed by userspace and thermal framework
simultaneously. (Thara Gopinath)
- Fix a problem that passive cooling is reset improperly after system
suspend/resume. (Wei Wang)
- Cleanup the driver/thermal/ directory by moving intel and qcom
platform specific drivers to platform specific sub-directories. (Amit
Kucheria)
- Some trivial cleanups. (Lukasz Luba, Wolfram Sang)
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal/intel: fixup for Kconfig string parsing tightening up
drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdir
drivers: thermal: Move various drivers for intel platforms into a subdir
thermal: Fix locking in cooling device sysfs update cur_state
Thermal: do not clear passive state during system sleep
thermal: zx2967_thermal: simplify getting .driver_data
thermal: st: st_thermal: simplify getting .driver_data
thermal: spear_thermal: simplify getting .driver_data
thermal: rockchip_thermal: simplify getting .driver_data
thermal: int340x_thermal: int3400_thermal: simplify getting .driver_data
thermal: remove unused function parameter
Pull thermal SoC updates from Eduardo Valentin:
- Tegra DT binding documentation for Tegra194
- Armada now supports ap806 and cp110
- RCAR thermal now supports R8A774C0 and R8A77990
- Fixes on thermal_hwmon, IMX, generic-ADC, ST, RCAR, Broadcom,
Uniphier, QCOM, Tegra, PowerClamp, and Armada thermal drivers.
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (22 commits)
thermal: generic-adc: Fix adc to temp interpolation
thermal: rcar_thermal: add R8A77990 support
dt-bindings: thermal: rcar-thermal: add R8A77990 support
thermal: rcar_thermal: add R8A774C0 support
dt-bindings: thermal: rcar-thermal: add R8A774C0 support
dt-bindings: cp110: document the thermal interrupt capabilities
dt-bindings: ap806: document the thermal interrupt capabilities
MAINTAINERS: thermal: add entry for Marvell MVEBU thermal driver
thermal: armada: add overheat interrupt support
thermal: st: fix Makefile typo
thermal: uniphier: Convert to SPDX identifier
thermal/intel_powerclamp: Change to use DEFINE_SHOW_ATTRIBUTE macro
thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macro
dt-bindings: thermal: tegra-bpmp: Add Tegra194 support
thermal: imx: save one condition block for normal case of nvmem initialization
thermal: imx: fix for dependency on cpu-freq
thermal: tsens: qcom: do not create duplicate regmap debugfs entries
thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy()
dt-bindings: thermal: rcar-gen3-thermal: All variants use 3 interrupts
thermal: broadcom: use devm_thermal_zone_of_sensor_register
...
First correct the edge case to return the last element if we're
outside the range, rather than at the last element, so that
interpolation is not omitted for points between the two last entries in
the table.
Then correct the formula to perform linear interpolation based the two
points surrounding the read ADC value. The indices for temp are kept as
"hi" and "lo" to pair with the adc indices, but there's no requirement
that the temperature is provided in descendent order. mult_frac() is
used to prevent issues with overflowing the int.
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The IP can manage to trigger interrupts on overheat situation from all
the sensors.
However, the interrupt source changes along with the last selected
source (ie. the last read sensor), which is an inconsistent behavior.
Avoid possible glitches by always selecting back only one channel which
will then be referenced as the "overheat_sensor" (arbitrarily: the first
in the DT which has a critical trip point filled in).
It is possible that the scan of all thermal zone nodes did not bring a
critical trip point from which the overheat interrupt could be
configured. In this case just complain but do not fail the probe.
Also disable sensor switch during overheat situations because changing
the channel while the system is too hot could clear the overheat state
by changing the source while the temperature is still very high.
Even if the overheat state is not declared, overheat interrupt must be
cleared by reading the DFX interrupt cause _after_ the temperature has
fallen down to the low threshold, otherwise future possible interrupts
would not be served. A work polls the corresponding register until the
overheat flag gets cleared in this case.
Suggested-by: David Sniatkiwicz <davidsn@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
When STM32_THERMAL is enabled, this overrides all previously
enabled files in the same directory, as seen from this link failure:
ERROR: "st_thermal_pm_ops" [drivers/thermal/st/st_thermal_syscfg.ko] undefined!
ERROR: "st_thermal_register" [drivers/thermal/st/st_thermal_syscfg.ko] undefined!
ERROR: "st_thermal_unregister" [drivers/thermal/st/st_thermal_syscfg.ko] undefined!
The correct syntax in Makefile requires using += instead of :=.
Fixes: 1d69315560 ("thermal: add stm32 thermal driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Put return value checks of calling imx_init_from_nvmem_cells()
into one block to save one condition block for normal case.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The thermal driver is a standalone driver for monitoring SoC temperature
by enabling thermal sensor, so it can be enabled even when CONFIG_CPU_FREQ
is NOT set. So remove the dependency with CPU_THERMAL.
Introduce dummy function of legacy cooling register/unregister to make
thermal driver probe successfully when CONFIG_CPU_FREQ is NOT set.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Regmap would use device name to create debugfs entries. If the device
has multiple regmaps it is recommended to use name field in regmap_config.
Fix this by providing name to the regmap configs correctly.
Without this patch we would see below error on DB820c.
qcom-tsens 4a9000.thermal-sensor: Failed to create 4a9000.thermal-sensor
debugfs directory
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Using devm_thermal_zone_of_sensor_register allows to simplify some
error handling code, drop a label, and drop the remove function.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
By defaul of-based thermal driver do not enable hwmon.
This patch does this explicitly, so that the temperature can be read
through the common hwmon sysfs.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Avoid warnings like this:
thermal_hwmon.h:29:1: warning: ‘thermal_remove_hwmon_sysfs’ defined but not used [-Wunused-function]
thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
Fixes: 0dd88793aa ("thermal: hwmon: move hwmon support to single file")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
- support -y option for merge_config.sh to avoid downgrading =y to =m
- remove S_OTHER symbol type, and touch include/config/*.h files correctly
- fix file name and line number in lexer warnings
- fix memory leak when EOF is encountered in quotation
- resolve all shift/reduce conflicts of the parser
- warn no new line at end of file
- make 'source' statement more strict to take only string literal
- rewrite the lexer and remove the keyword lookup table
- convert to SPDX License Identifier
- compile C files independently instead of including them from zconf.y
- fix various warnings of gconfig
- misc cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r3Fl
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- support -y option for merge_config.sh to avoid downgrading =y to =m
- remove S_OTHER symbol type, and touch include/config/*.h files correctly
- fix file name and line number in lexer warnings
- fix memory leak when EOF is encountered in quotation
- resolve all shift/reduce conflicts of the parser
- warn no new line at end of file
- make 'source' statement more strict to take only string literal
- rewrite the lexer and remove the keyword lookup table
- convert to SPDX License Identifier
- compile C files independently instead of including them from zconf.y
- fix various warnings of gconfig
- misc cleanups
* tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning
kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings
kconfig: add static qualifiers to fix gconf warnings
kconfig: split the lexer out of zconf.y
kconfig: split some C files out of zconf.y
kconfig: convert to SPDX License Identifier
kconfig: remove keyword lookup table entirely
kconfig: update current_pos in the second lexer
kconfig: switch to ASSIGN_VAL state in the second lexer
kconfig: stop associating kconf_id with yylval
kconfig: refactor end token rules
kconfig: stop supporting '.' and '/' in unquoted words
treewide: surround Kconfig file paths with double quotes
microblaze: surround string default in Kconfig with double quotes
kconfig: use T_WORD instead of T_VARIABLE for variables
kconfig: use specific tokens instead of T_ASSIGN for assignments
kconfig: refactor scanning and parsing "option" properties
kconfig: use distinct tokens for type and default properties
kconfig: remove redundant token defines
kconfig: rename depends_list to comment_option_list
...
The Kconfig lexer supports special characters such as '.' and '/' in
the parameter context. In my understanding, the reason is just to
support bare file paths in the source statement.
I do not see a good reason to complicate Kconfig for the room of
ambiguity.
The majority of code already surrounds file paths with double quotes,
and it makes sense since file paths are constant string literals.
Make it treewide consistent now.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Adding brackets allows to multiply the register value,
masked by TS1_RAMP_COEFF_MASK, by an ADJUST value
properly and not to multiply ADJUST by register value and
then mask the whole.
Fixes: 1d693155 ("thermal: add stm32 thermal driver")
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Calling stm_thermal_read_factory_settings before clocking
internal peripheral causes bad register values and makes
temperature computation wrong.
Calling stm_thermal_read_factory_settings inside
stm_thermal_prepare fixes this problem as internal
peripheral is well clocked at this stage.
Fixes: 1d693155 ("thermal: add stm32 thermal driver")
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Without this patch the thermal driver is broken on hi3660.
The dual sensors support patchset was partially merged, unfortunately
the dual thermal zones definition is not available in the DT yet, so
when the driver tries to register all the sensors that fails.
By reducing to 1 the number of sensors on the hi3660, we switch back
to the previous functionnality.
Fixes: 8c6c36846f (thermal/drivers/hisi: Add the dual clusters sensors for hi3660)
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Without this patch, the thermal driver on hi6220 and hi3660 is broken.
That is due because part of the posted patchset was merged but a small
change in the DT was dropped.
The hi6220 and hi3660 do not have an interrupt name in the DT, so
finding interrupt by name fails.
Fix this by returning back to the platform_get_irq() function call.
Fixes: 2cffaeff08 (thermal/drivers/hisi: Use platform_get_irq_byname)
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
This cleans up the directory a bit allowing just one place to look for
thermal related drivers for QCOM platforms instead of being scattered in
the root directory and the qcom/ subdirectory. Compile-tested with
ARCH=arm64 defconfig and the driver explicitly enabled with menuconfig.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
This cleans up the directory a bit, now that we have several other
platforms using platform-specific sub-directories. Compile-tested with
ARCH=x86 defconfig and the drivers explicitly enabled with menuconfig.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
The thermal_zone_of_device_ops structure can be const as it is only
passed as the last argument of thermal_zone_of_sensor_register
and the corresponding parameter is declared as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The thermal_zone_of_device_ops structure can be const as it is only
passed as the last argument of devm_thermal_zone_of_sensor_register
and the corresponding parameter is declared as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
When the armada thermal module is inserted, removed and then reinserted,
the system panics as per the messages below. The reason is that "edit"
a live resource in the resource tree twice, and end up with it pointing
to some other hardware.
Editing live resources (resources that are part of the registered
resource tree) is not permissible - the resource tree is an ordered
set of resources, sorted by start address, and when a new resource is
inserted, it is validated that it (a) fits within its parent resource
and (b) does not overlap a neighbouring resource.
Get rid of this resource editing. We can instead adjust the return
value from ioremap() as ioremap() deals with the creation of page-
based mappings - provided the adjustment does not cross a page
boundary.
SError Interrupt on CPU1, code 0xbf000000 -- SError
CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175
Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT)
pstate: 20400085 (nzCv daIf +PAN -UAO)
pc : regmap_mmio_read+0x3c/0x60
lr : regmap_mmio_read+0x3c/0x60
sp : ffffff800d453900
x29: ffffff800d453900 x28: ffffff800096a1d0
x27: 0000000000000100 x26: ffffff80009696d8
x25: ffffff8000969000 x24: ffffffc13a588918
x23: ffffffc13a9a28a8 x22: ffffff800d4539dc
x21: 0000000000000084 x20: ffffff800d4539dc
x19: ffffffc13a5d5480 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000030
x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
x9 : 0000000000000000 x8 : ffffffc13a5d5a80
x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000000 x4 : 0000000000000000
x3 : ffffff800851be70 x2 : ffffff800851bd60
x1 : ffffff800d492ff8 x0 : 0000000000000000
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175
Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT)
Call trace:
dump_backtrace+0x0/0x158
show_stack+0x14/0x1c
dump_stack+0x90/0xb0
panic+0x128/0x298
print_tainted+0x0/0xa8
arm64_serror_panic+0x74/0x80
do_serror+0x5c/0xb8
el1_error+0xb4/0x144
regmap_mmio_read+0x3c/0x60
_regmap_bus_reg_read+0x18/0x20
_regmap_read+0x64/0x180
regmap_read+0x44/0x6c
armada_ap806_init+0x24/0x5c [armada_thermal]
armada_thermal_probe+0x2c8/0x37c [armada_thermal]
platform_drv_probe+0x4c/0xb0
really_probe+0x21c/0x2b4
driver_probe_device+0x58/0xfc
__driver_attach+0xd4/0xd8
bus_for_each_dev+0x50/0xa0
driver_attach+0x20/0x28
bus_add_driver+0x1c4/0x228
driver_register+0x6c/0x124
__platform_driver_register+0x4c/0x54
armada_thermal_driver_init+0x20/0x1000 [armada_thermal]
do_one_initcall+0x30/0x204
do_init_module+0x5c/0x1d4
load_module+0x1a88/0x212c
__se_sys_finit_module+0xa0/0xac
__arm64_sys_finit_module+0x1c/0x24
el0_svc_common+0x94/0xf0
el0_svc_handler+0x24/0x80
el0_svc+0x8/0x3c0
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0,21806000
Memory Limit: none
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Commit 8c0e64ac40 ("thermal: armada: get rid of the ->is_valid()
pointer") removed the unnecessary indirection through a function
pointer, but in doing so, also removed the negation operator too:
- if (priv->data->is_valid && !priv->data->is_valid(priv)) {
+ if (armada_is_valid(priv)) {
which results in:
armada_thermal f06f808c.thermal: Temperature sensor reading not valid
armada_thermal f2400078.thermal: Temperature sensor reading not valid
armada_thermal f4400078.thermal: Temperature sensor reading not valid
at boot, or whenever the "temp" sysfs file is read. Replace the
negation operator.
Fixes: 8c0e64ac40 ("thermal: armada: get rid of the ->is_valid() pointer")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Sysfs interface to update cooling device cur_state does not
currently holding cooling device lock sometimes leading to
stale values in cur_state if getting updated simultanelously
from user space and thermal framework. Adding the proper locking
code fixes this issue.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
commit ff140fea84 ("Thermal: handle thermal zone device properly
during system sleep") added PM hook to call thermal zone reset during
sleep. However resetting thermal zone will also clear the passive state
and thus cancel the polling queue which leads the passive cooling device
state not being cleared properly after sleep.
thermal_pm_notify => thermal_zone_device_reset set passive to 0
thermal_zone_trip_update will skip update passive as `old_target ==
instance->target'.
monitor_thermal_zone => thermal_zone_device_set_polling will cancel
tz->poll_queue, so the cooling device state will not be changed
afterwards.
Reported-by: Kame Wang <kamewang@google.com>
Signed-off-by: Wei Wang <wvw@google.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Pull thermal management updates from Zhang Rui:
- Fix a use-after-free issue when unregistering a thermal cooling
device (Dmitry Osipenko)
- use power_efficient_wq for thermal worker to save more power (Jeson
Gao)
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: core: using power_efficient_wq for thermal worker
thermal: core: Fix use-after-free in thermal_cooling_device_destroy_sysfs
Pull thermal SoC updates from Eduardo Valentin:
"Several new things coming up. Specifics:
- Rework of tsens and hisi thermal drivers
- OF-thermal now allows sharing multiple cooling devices on maps
- Added support for r8a7744 and R8A77970 on rcar thermal driver
- Added support for r8a774a1 on rcar_gen3 thermal driver
- New thermal driver stm32
- Fixes on multiple thermal drivers: of-thermal, imx, qoriq, armada,
qcom-spmi, rcar, da9062/61"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (41 commits)
thermal: da9062/61: Prevent hardware access during system suspend
thermal: rcar_thermal: Prevent doing work after unbind
thermal: rcar_thermal: Prevent hardware access during system suspend
thermal: rcar_gen3_thermal: add R8A77980 support
dt-bindings: thermal: rcar-gen3-thermal: document R8A77980 bindings
thermal: add stm32 thermal driver
dt-bindings: stm32-thermal: add binding documentation
thermal: rcar_thermal: add R8A77970 support
dt-bindings: thermal: rcar-thermal: document R8A77970 bindings
thermal: rcar_thermal: fix duplicate IRQ request
dt-bindings: thermal: rcar: Add device tree support for r8a7744
thermal/drivers/hisi: Add the dual clusters sensors for hi3660
thermal/drivers/hisi: Add more sensors channel
thermal/drivers/hisi: Remove pointless irq field
thermal/drivers/hisi: Use platform_get_irq_byname
thermal/drivers/hisi: Replace macro name with relevant sensor location
thermal/drivers/hisi: Add multiple sensors support
thermal/drivers/hisi: Prepare to support multiple sensors
thermal/drivers/hisi: Factor out the probe functions
thermal/drivers/hisi: Set the thermal zone private data to the sensor pointer
...
The workqueue used for monitoring the hardware may run while the device
is already suspended. Fix this by using the freezable system workqueue
instead, cfr. commit 51e20d0e3a ("thermal: Prevent polling from
happening during system suspend").
Fixes: 608567aac3 ("thermal: da9062/61: Thermal junction temperature monitoring driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
When testing bind/unbind on r8a7791/koelsch:
WARNING: CPU: 1 PID: 697 at lib/debugobjects.c:329 debug_print_object+0x8c/0xb4
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x10
This happens if the workqueue runs after the device has been unbound.
Fix this by cancelling any queued work during remove.
Fixes: e0a5172e9e ("thermal: rcar: add interrupt support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
On r8a7791/koelsch, sometimes the following message is printed during
system suspend:
rcar_thermal e61f0000.thermal: thermal sensor was broken
This happens if the workqueue runs while the device is already
suspended. Fix this by using the freezable system workqueue instead,
cfr. commit 51e20d0e3a ("thermal: Prevent polling from happening
during system suspend").
Fixes: e0a5172e9e ("thermal: rcar: add interrupt support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Add the R-Car V3H (R8A77980) SoC support to the R-Car gen3 thermal driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Add support for DTS thermal sensor that can be
found on some STM32 platforms.
This driver is based on OF and works in interrupt
mode.
It offers two temperature trip points:
passive and critical. The first is intended for
passive cooling notification while the second is
used for over-temperature reset.
Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Add the R-Car V3M (R8A77970) SoC support to the R-Car gen2 thermal driver.
The hardware is the same as in the R-Car D3 (R8A77995) plus the CIVM status
register (we don't use).
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The driver on R8A77995 requests the same IRQ twice since
platform_get_resource() is always called for the 1st IRQ resource.
Fixes: 1969d9dc20 ("thermal: rcar_thermal: add r8a77995 support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The code is ready to support multiple sensors on the hi3660. The DT
defines a thermal zone per cluster.
Add the little cluster sensor and let it bind with the thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Add the sensor channels id for the little, g3d and modem.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The irq field in the data structure is pointless as the scope of its
usage is just to request the interrupt. It can be replaced by a local
variable.
Use the 'ret' variable to get the interrupt number.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
As we have the interrupt names defines, replace platform_get_irq() by
platform_get_irq_byname(), so no confusion can be made when getting
the interrupt with the sensor id.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Change the macro name in order to give a better indication of the
sensor location.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Heiko Stuebner