refactor the nfs4 server lock code to use last_byte_offset
to compute the last byte covered by the lock. Check for overflow
so that the last byte is set to NFS4_MAX_UINT64 if offset + len
wraps around.
Also, use NFS4_MAX_UINT64 for ~(u64)0 where appropriate.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There's no use for nfs4_cb_null_ops's declaration in fs/nfsd/nfs4callback.c
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
When determining the fsid_type in fh_compose(), the setting of the FID
via fsid= export option needs to take precedence over using the UUID
device id.
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
A number of nfsd operations depend on the i_mutex to cover more code
than just the fsync, so the approach of 4c728ef583 "add a vfs_fsync
helper" doesn't work for nfsd. Revert the parts of those patches that
touch nfsd.
Note: we can't, however, remove the logic from vfs_fsync that was needed
only for the special case of nfsd, because a vfs_fsync(NULL,...) call
can still result indirectly from a stackable filesystem that was called
by nfsd. (Thanks to Christoph Hellwig for pointing this out.)
Reported-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Fix a regression in NFSD's permission checking introduced by the credentials
patches. There are two parts to the problem, both in nfsd_setuser():
(1) The return value of set_groups() is -ve if in error, not 0, and should be
checked appropriately. 0 indicates success.
(2) The UID to use for fs accesses is in new->fsuid, not new->uid (which is
0). This causes CAP_DAC_OVERRIDE to always be set, rather than being
cleared if the UID is anything other than 0 after squashing.
Reported-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Since nfsv4 allows LOCKT without an open, but the ->lock() method is a
file method, we fake up a struct file in the nfsv4 code with just the
fields we need initialized. But we forgot to initialize the file
operations, with the result that LOCKT never results in a call to the
filesystem's ->lock() method (if it exists).
We could just add that one more initialization. But this hack of faking
up a struct file with only some fields initialized seems the kind of
thing that might cause more problems in the future. We should either do
an open and get a real struct file, or make lock-testing an inode (not a
file) method.
This patch does the former.
Reported-by: Marc Eshel <eshel@almaden.ibm.com>
Tested-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Document the NFSD sysctl interface laid out in fs/nfsd/nfsctl.c.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Instead of open-coding 2049, use the NFS_PORT macro.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Rename recently-added failover functions to match the naming
convention in fs/nfsd/nfsctl.c.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
cksum.data is not freed up in one error case. Compile tested.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Minor cleanup/rewrite of find_stateid. Compile tested.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Fsync currently has a fdatawrite/fdatawait pair around the method call,
and a mutex_lock/unlock of the inode mutex. All callers of fsync have
to duplicate this, but we have a few and most of them don't quite get
it right. This patch adds a new vfs_fsync that takes care of this.
It's a little more complicated as usual as ->fsync might get a NULL file
pointer and just a dentry from nfsd, but otherwise gets afile and we
want to take the mapping and file operations from it when it is there.
Notes on the fsync callers:
- ecryptfs wasn't calling filemap_fdatawrite / filemap_fdatawait on the
lower file
- coda wasn't calling filemap_fdatawrite / filemap_fdatawait on the host
file, and returning 0 when ->fsync was missing
- shm wasn't calling either filemap_fdatawrite / filemap_fdatawait nor
taking i_mutex. Now given that shared memory doesn't have disk
backing not doing anything in fsync seems fine and I left it out of
the vfs_fsync conversion for now, but in that case we might just
not pass it through to the lower file at all but just call the no-op
simple_sync_file directly.
[and now actually export vfs_fsync]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We used to have rather schizophrenic set of checks for NULL ->i_op even
though it had been eliminated years ago. You'd need to go out of your
way to set it to NULL explicitly _and_ a bunch of code would die on
such inodes anyway. After killing two remaining places that still
did that bogosity, all that crap can go away.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
net: Allow dependancies of FDDI & Tokenring to be modular.
igb: Fix build warning when DCA is disabled.
net: Fix warning fallout from recent NAPI interface changes.
gro: Fix potential use after free
sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
sfc: When disabling the NIC, close the device rather than unregistering it
sfc: SFT9001: Add cable diagnostics
sfc: Add support for multiple PHY self-tests
sfc: Merge top-level functions for self-tests
sfc: Clean up PHY mode management in loopback self-test
sfc: Fix unreliable link detection in some loopback modes
sfc: Generate unique names for per-NIC workqueues
802.3ad: use standard ethhdr instead of ad_header
802.3ad: generalize out mac address initializer
802.3ad: initialize ports LACPDU from const initializer
802.3ad: remove typedef around ad_system
802.3ad: turn ports is_individual into a bool
802.3ad: turn ports is_enabled into a bool
802.3ad: make ntt bool
ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
...
Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).
This patch adds server-side support for callbacks other than AUTH_SYS.
Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The rpc client needs to know the principal that the setclientid was done
as, so it can tell gssd who to authenticate to.
Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Two principals are involved in krb5 authentication: the target, who we
authenticate *to* (normally the name of the server, like
nfs/server.citi.umich.edu@CITI.UMICH.EDU), and the source, we we
authenticate *as* (normally a user, like bfields@UMICH.EDU)
In the case of NFSv4 callbacks, the target of the callback should be the
source of the client's setclientid call, and the source should be the
nfs server's own principal.
Therefore we allow svcgssd to pass down the name of the principal that
just authenticated, so that on setclientid we can store that principal
name with the new client, to be used later on callbacks.
Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Conflicts:
fs/nfsd/nfs4recover.c
Manually fixed above to use new creds API functions, e.g.
nfs4_save_creds().
Signed-off-by: James Morris <jmorris@namei.org>
If nfsd was shut down before the grace period ended, we could end up
with a freed object still on grace_list. Thanks to Jeff Moyer for
reporting the resulting list corruption warnings.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Conflicts:
security/keys/internal.h
security/keys/process_keys.c
security/keys/request_key.c
Fixed conflicts above by using the non 'tsk' versions.
Signed-off-by: James Morris <jmorris@namei.org>
Differentiate the objective and real subjective credentials from the effective
subjective credentials on a task by introducing a second credentials pointer
into the task_struct.
task_struct::real_cred then refers to the objective and apparent real
subjective credentials of a task, as perceived by the other tasks in the
system.
task_struct::cred then refers to the effective subjective credentials of a
task, as used by that task when it's actually running. These are not visible
to the other tasks in the system.
__task_cred(task) then refers to the objective/real credentials of the task in
question.
current_cred() refers to the effective subjective credentials of the current
task.
prepare_creds() uses the objective creds as a base and commit_creds() changes
both pointers in the task_struct (indeed commit_creds() requires them to be the
same).
override_creds() and revert_creds() change the subjective creds pointer only,
and the former returns the old subjective creds. These are used by NFSD,
faccessat() and do_coredump(), and will by used by CacheFiles.
In SELinux, current_has_perm() is provided as an alternative to
task_has_perm(). This uses the effective subjective context of current,
whereas task_has_perm() uses the objective/real context of the subject.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Inaugurate copy-on-write credentials management. This uses RCU to manage the
credentials pointer in the task_struct with respect to accesses by other tasks.
A process may only modify its own credentials, and so does not need locking to
access or modify its own credentials.
A mutex (cred_replace_mutex) is added to the task_struct to control the effect
of PTRACE_ATTACHED on credential calculations, particularly with respect to
execve().
With this patch, the contents of an active credentials struct may not be
changed directly; rather a new set of credentials must be prepared, modified
and committed using something like the following sequence of events:
struct cred *new = prepare_creds();
int ret = blah(new);
if (ret < 0) {
abort_creds(new);
return ret;
}
return commit_creds(new);
There are some exceptions to this rule: the keyrings pointed to by the active
credentials may be instantiated - keyrings violate the COW rule as managing
COW keyrings is tricky, given that it is possible for a task to directly alter
the keys in a keyring in use by another task.
To help enforce this, various pointers to sets of credentials, such as those in
the task_struct, are declared const. The purpose of this is compile-time
discouragement of altering credentials through those pointers. Once a set of
credentials has been made public through one of these pointers, it may not be
modified, except under special circumstances:
(1) Its reference count may incremented and decremented.
(2) The keyrings to which it points may be modified, but not replaced.
The only safe way to modify anything else is to create a replacement and commit
using the functions described in Documentation/credentials.txt (which will be
added by a later patch).
This patch and the preceding patches have been tested with the LTP SELinux
testsuite.
This patch makes several logical sets of alteration:
(1) execve().
This now prepares and commits credentials in various places in the
security code rather than altering the current creds directly.
(2) Temporary credential overrides.
do_coredump() and sys_faccessat() now prepare their own credentials and
temporarily override the ones currently on the acting thread, whilst
preventing interference from other threads by holding cred_replace_mutex
on the thread being dumped.
This will be replaced in a future patch by something that hands down the
credentials directly to the functions being called, rather than altering
the task's objective credentials.
(3) LSM interface.
A number of functions have been changed, added or removed:
(*) security_capset_check(), ->capset_check()
(*) security_capset_set(), ->capset_set()
Removed in favour of security_capset().
(*) security_capset(), ->capset()
New. This is passed a pointer to the new creds, a pointer to the old
creds and the proposed capability sets. It should fill in the new
creds or return an error. All pointers, barring the pointer to the
new creds, are now const.
(*) security_bprm_apply_creds(), ->bprm_apply_creds()
Changed; now returns a value, which will cause the process to be
killed if it's an error.
(*) security_task_alloc(), ->task_alloc_security()
Removed in favour of security_prepare_creds().
(*) security_cred_free(), ->cred_free()
New. Free security data attached to cred->security.
(*) security_prepare_creds(), ->cred_prepare()
New. Duplicate any security data attached to cred->security.
(*) security_commit_creds(), ->cred_commit()
New. Apply any security effects for the upcoming installation of new
security by commit_creds().
(*) security_task_post_setuid(), ->task_post_setuid()
Removed in favour of security_task_fix_setuid().
(*) security_task_fix_setuid(), ->task_fix_setuid()
Fix up the proposed new credentials for setuid(). This is used by
cap_set_fix_setuid() to implicitly adjust capabilities in line with
setuid() changes. Changes are made to the new credentials, rather
than the task itself as in security_task_post_setuid().
(*) security_task_reparent_to_init(), ->task_reparent_to_init()
Removed. Instead the task being reparented to init is referred
directly to init's credentials.
NOTE! This results in the loss of some state: SELinux's osid no
longer records the sid of the thread that forked it.
(*) security_key_alloc(), ->key_alloc()
(*) security_key_permission(), ->key_permission()
Changed. These now take cred pointers rather than task pointers to
refer to the security context.
(4) sys_capset().
This has been simplified and uses less locking. The LSM functions it
calls have been merged.
(5) reparent_to_kthreadd().
This gives the current thread the same credentials as init by simply using
commit_thread() to point that way.
(6) __sigqueue_alloc() and switch_uid()
__sigqueue_alloc() can't stop the target task from changing its creds
beneath it, so this function gets a reference to the currently applicable
user_struct which it then passes into the sigqueue struct it returns if
successful.
switch_uid() is now called from commit_creds(), and possibly should be
folded into that. commit_creds() should take care of protecting
__sigqueue_alloc().
(7) [sg]et[ug]id() and co and [sg]et_current_groups.
The set functions now all use prepare_creds(), commit_creds() and
abort_creds() to build and check a new set of credentials before applying
it.
security_task_set[ug]id() is called inside the prepared section. This
guarantees that nothing else will affect the creds until we've finished.
The calling of set_dumpable() has been moved into commit_creds().
Much of the functionality of set_user() has been moved into
commit_creds().
The get functions all simply access the data directly.
(8) security_task_prctl() and cap_task_prctl().
security_task_prctl() has been modified to return -ENOSYS if it doesn't
want to handle a function, or otherwise return the return value directly
rather than through an argument.
Additionally, cap_task_prctl() now prepares a new set of credentials, even
if it doesn't end up using it.
(9) Keyrings.
A number of changes have been made to the keyrings code:
(a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have
all been dropped and built in to the credentials functions directly.
They may want separating out again later.
(b) key_alloc() and search_process_keyrings() now take a cred pointer
rather than a task pointer to specify the security context.
(c) copy_creds() gives a new thread within the same thread group a new
thread keyring if its parent had one, otherwise it discards the thread
keyring.
(d) The authorisation key now points directly to the credentials to extend
the search into rather pointing to the task that carries them.
(e) Installing thread, process or session keyrings causes a new set of
credentials to be created, even though it's not strictly necessary for
process or session keyrings (they're shared).
(10) Usermode helper.
The usermode helper code now carries a cred struct pointer in its
subprocess_info struct instead of a new session keyring pointer. This set
of credentials is derived from init_cred and installed on the new process
after it has been cloned.
call_usermodehelper_setup() allocates the new credentials and
call_usermodehelper_freeinfo() discards them if they haven't been used. A
special cred function (prepare_usermodeinfo_creds()) is provided
specifically for call_usermodehelper_setup() to call.
call_usermodehelper_setkeys() adjusts the credentials to sport the
supplied keyring as the new session keyring.
(11) SELinux.
SELinux has a number of changes, in addition to those to support the LSM
interface changes mentioned above:
(a) selinux_setprocattr() no longer does its check for whether the
current ptracer can access processes with the new SID inside the lock
that covers getting the ptracer's SID. Whilst this lock ensures that
the check is done with the ptracer pinned, the result is only valid
until the lock is released, so there's no point doing it inside the
lock.
(12) is_single_threaded().
This function has been extracted from selinux_setprocattr() and put into
a file of its own in the lib/ directory as join_session_keyring() now
wants to use it too.
The code in SELinux just checked to see whether a task shared mm_structs
with other tasks (CLONE_VM), but that isn't good enough. We really want
to know if they're part of the same thread group (CLONE_THREAD).
(13) nfsd.
The NFS server daemon now has to use the COW credentials to set the
credentials it is going to use. It really needs to pass the credentials
down to the functions it calls, but it can't do that until other patches
in this series have been applied.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
Pass credentials through dentry_open() so that the COW creds patch can have
SELinux's flush_unauthorized_files() pass the appropriate creds back to itself
when it opens its null chardev.
The security_dentry_open() call also now takes a creds pointer, as does the
dentry_open hook in struct security_operations.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
Separate the task security context from task_struct. At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.
Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.
With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
Commit 8d7c4203 "nfsd: fix failure to set eof in readdir in some
situations" introduced a bug: on a directory in an exported ext3
filesystem with dir_index unset, a READDIR will only return about 250
entries, even if the directory was larger.
Bisected it back to this commit; reverting it fixes the problem.
It turns out that in this case ext3 reads a block at a time, then
returns from readdir, which means we can end up with buf.full==0 but
with more entries in the directory still to be read. Before 8d7c4203
(but after c002a6c797 "Optimise NFS readdir hack slightly"), this would
cause us to return the READDIR result immediately, but with the eof bit
unset. That could cause a performance regression (because the client
would need more roundtrips to the server to read the whole directory),
but no loss in correctness, since the cleared eof bit caused the client
to send another readdir. After 8d7c4203, the setting of the eof bit
made this a correctness problem.
So, move nfserr_eof into the loop and remove the buf.full check so that
we loop until buf.used==0. The following seems to do the right thing
and reduces the network traffic since we don't return a READDIR result
until the buffer is full.
Tested on an empty directory & large directory; eof is properly sent and
there are no more short buffers.
Signed-off-by: Doug Nazar <nazard@dragoninc.ca>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before 14f7dd6320 "[PATCH] Copy XFS
readdir hack into nfsd code", readdir_cd->err was reset to eof before
each call to vfs_readdir; afterwards, it is set only once. Similarly,
c002a6c797 "[PATCH] Optimise NFS readdir
hack slightly", can cause us to exit without nfserr_eof set. Fix this.
This ensures the "eof" bit is set when needed in readdir replies. (The
particular case I saw was an nfsv4 readdir of an empty directory, which
returned with no entries (the protocol requires "." and ".." to be
filtered out), but with eof unset.)
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Avoid calling the underlying ->readdir() again when we reached the end
already; keep going round the loop only if we stopped due to our own
buffer being full.
[AV: tidy the things up a bit, while we are there]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's not the final state, but it allows moving ->readdir() instances
to passing filldir return value to caller of vfs_readdir().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Some file systems with their own internal locking have problems with the
way that nfsd calls the ->lookup() method from within a filldir function
called from their ->readdir() method. The recursion back into the file
system code can cause deadlock.
XFS has a fairly hackish solution to this which involves doing the
readdir() into a locally-allocated buffer, then going back through it
calling the filldir function afterwards. It's not ideal, but it works.
It's particularly suboptimal because XFS does this for local file
systems too, where it's completely unnecessary.
Copy this hack into the NFS code where it can be used only for NFS
export. In response to feedback, use it unconditionally rather than only
for the affected file systems.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We might as well do all of these at the end. Fix up a couple minor
style nits while we're there.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Drop reference to export key on error. Compile tested.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Fix a memory leak in nfsd_getxattr. nfsd_getxattr should free up memory
that it allocated if vfs_getxattr fails.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The Linux NFS server can be started via a user-space write to
/proc/fs/nfs/threads or to /proc/fs/nfs/portlist. In the first case,
all default listeners are started (both UDP and TCP). In the second,
a listener is started only for one specified transport.
The NFS server has to make sure lockd stays up until the last listener
transport goes away. To support both start-up interfaces, it should
do one lockd_up() for each NFSD listener.
The nfsd_init_socks() function used to do one lockd_up() call for each
svc_create_xprt(). Recently commit
26a4140923 mistakenly changed
nfsd_init_socks() to do only one lockd_up() call even though it still
does two svc_create_xprt() calls.
The end result is a lockd_down() BUG during NFSD shutdown processing
because nfsd_last_threads() does a lockd_down() call for each entry
on the sv_permsocks list, but the start-up code doesn't do a matching
number of lockd_up() calls.
Add a second lockd_up() in nfsd_init_socks() to make sure the number
of lockd_up() calls matches the number of entries on the NFS servers's
sv_permsocks list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: The svc_addsock() function no longer uses its "proto"
argument, so remove it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: Now that lockd_up() starts listeners for both transports, the
"proto" argument is no longer needed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Rewrite grace period code to unify management of grace period across
lockd and nfsd. The current code has lockd and nfsd cooperate to
compute a grace period which is satisfactory to them both, and then
individually enforce it. This creates a slight race condition, since
the enforcement is not coordinated. It's also more complicated than
necessary.
Here instead we have lockd and nfsd each inform common code when they
enter the grace period, and when they're ready to leave the grace
period, and allow normal locking only after both of them are ready to
leave.
We also expect the locks_start_grace()/locks_end_grace() interface here
to be simpler to build on for future cluster/high-availability work,
which may require (for example) putting individual filesystems into
grace, or enforcing grace periods across multiple cluster nodes.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
since commit ff7d9756b5
"nfsd: use static memory for callback program and stats"
do_probe_callback uses a static callback program
(NFS4_CALLBACK) rather than the one set in clp->cl_callback.cb_prog
as passed in by the client in setclientid (4.0)
or create_session (4.1).
This patches introduces rpc_create_args.prognumber that allows
overriding program->number when creating rpc_clnt.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Now that cb_stats are static (since commit
ff7d9756b5)
there's no need to clear them.
Initially I thought it might make sense to do
that every callback probing but since the stats
are per-program and they are shared between possibly
several client callback instances, zeroing them out
seems like the wrong thing to do.
Note that that commit also introduced a bug
since stats.program is also being cleared in the process
and it is not restored after the memset as it used to be.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
I had a report from someone building a large NFS server that they were
unable to start more than 585 nfsd threads. It was reported against an
older kernel using the slab allocator, and I tracked it down to the
large allocation in nfsd_racache_init failing.
It appears that the slub allocator handles large allocations better,
but large contiguous allocations can often be problematic. There
doesn't seem to be any reason that the racache has to be allocated as a
single large chunk. This patch breaks this up so that the racache is
built up from separate allocations.
(Thanks also to Takashi Iwai for a bugfix.)
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Takashi Iwai <tiwai@suse.de>
After using the encode_stateid helper the "p" pointer declared
by ENCODE_SEQID_OP_HEAD is warned as unused.
In the single site where it is still needed it can be declared
separately using the ENCODE_HEAD macro.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
nfsd4_encode_open first reservation is currently for 36 + sizeof(stateid_t)
while it writes after the stateid a cinfo (20 bytes) and 5 more 4-bytes
words, for a total of 40 + sizeof(stateid_t).
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
RFC 2623 section 2.3.2 permits the server to bypass gss authentication
checks for certain operations that a client may perform when mounting.
In the case of a client that doesn't have some form of credentials
available to it on boot, this allows it to perform the mount unattended.
(Presumably real file access won't be needed until a user with
credentials logs in.)
Being slightly more lenient allows lots of old clients to access
krb5-only exports, with the only loss being a small amount of
information leaked about the root directory of the export.
This affects only v2 and v3; v4 still requires authentication for all
access.
Thanks to Peter Staubach testing against a Solaris client, which
suggesting addition of v3 getattr, to the list, and to Trond for noting
that doing so exposes no additional information.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Peter Staubach <staubach@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Introduce and initialize an address family field in the svc_serv structure.
This field will determine what family to use for the service's listener
sockets and what families are advertised via the local rpcbind daemon.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The array we kmalloc() here is not large enough.
Thanks to Johann Dahm and David Richter for bug report and testing.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: David Richter <richterd@citi.umich.edu>
Tested-by: Johann Dahm <jdahm@umich.edu>
Move the cstate_alloc call so that if it fails, the response is setup to
encode the NFS error. The out label now means that the
nfsd4_compound_state has not been allocated.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There doesn't seem to be a compelling reason why nfsd4_op_name() is
marked as "inline":
It's only used in a dprintk(), and as long as it has only one caller
non-ancient gcc versions anyway inline it automatically.
This patch fixes the following compile error with gcc 3.4:
...
CC fs/nfsd/nfs4proc.o
nfs4proc.c: In function `nfsd4_proc_compound':
nfs4proc.c:854: sorry, unimplemented: inlining failed in call to
nfs4proc.c:897: sorry, unimplemented: called from here
make[3]: *** [fs/nfsd/nfs4proc.o] Error 1
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
[ Also made it "const char *" - Linus]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Once clp is assigned, it never becomes NULL, so we can make a label for it
in the error handling code. Because the call to path_lookup follows the
call to auth_domain_find, its error handling code should jump to this new
label.
The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r@
expression x,E;
statement S;
position p1,p2,p3;
@@
(
if ((x = auth_domain_find@p1(...)) == NULL || ...) S
|
x = auth_domain_find@p1(...)
... when != x
if (x == NULL || ...) S
)
<...
if@p3 (...) { ... when != auth_domain_put(x)
when != if (x) { ... auth_domain_put(x); ...}
return@p2 ...;
}
...>
(
return x;
|
return 0;
|
x = E
|
E = x
|
auth_domain_put(x)
)
@exists@
position r.p1,r.p2,r.p3;
expression x;
int ret != 0;
statement S;
@@
* x = auth_domain_find@p1(...)
<...
* if@p3 (...)
S
...>
* return@p2 \(NULL\|ret\);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
fs.h needs path.h, not namei.h; nfs_fs.h doesn't need it at all.
Several places in the tree needed direct include.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove the unused mode parameter from vfs_symlink and callers.
Thanks to Tetsuo Handa for noticing.
CC: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Fix nlm_fopen() to return NLM_FAILED (or NLM_LCK_DENIED_NOLOCKS) instead
of NLM_LCK_DENIED. The latter means the lock request failed because of a
conflicting lock (i.e. a temporary error), which is wrong in this case.
Also fix the client to return ENOLCK instead of EAGAIN if a blocking lock
request returns with NLM_LOCK_DENIED.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: David Teigland <teigland@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-2.6.27' of git://linux-nfs.org/~bfields/linux: (51 commits)
nfsd: nfs4xdr.c do-while is not a compound statement
nfsd: Use C99 initializers in fs/nfsd/nfs4xdr.c
lockd: Pass "struct sockaddr *" to new failover-by-IP function
lockd: get host reference in nlmsvc_create_block() instead of callers
lockd: minor svclock.c style fixes
lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_lock
lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_testlock
lockd: nlm_release_host() checks for NULL, caller needn't
file lock: reorder struct file_lock to save space on 64 bit builds
nfsd: take file and mnt write in nfs4_upgrade_open
nfsd: document open share bit tracking
nfsd: tabulate nfs4 xdr encoding functions
nfsd: dprint operation names
svcrdma: Change WR context get/put to use the kmem cache
svcrdma: Create a kmem cache for the WR contexts
svcrdma: Add flush_scheduled_work to module exit function
svcrdma: Limit ORD based on client's advertised IRD
svcrdma: Remove unused wait q from svcrdma_xprt structure
svcrdma: Remove unneeded spin locks from __svc_rdma_free
svcrdma: Add dma map count and WARN_ON
...
The WRITEMEM macro produces sparse warnings of the form:
fs/nfsd/nfs4xdr.c:2668:2: warning: do-while statement is not a compound statement
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Thanks to problem report and original patch from Harvey Harrison.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Benny Halevy <bhalevy@panasas.com>
Pass a more generic socket address type to nlmsvc_unlock_all_by_ip() to
allow for future support of IPv6. Also provide additional sanity
checking in failover_unlock_ip() when constructing the server's IP
address.
As an added bonus, provide clean kerneldoc comments on related NLM
interfaces which were recently added.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The cl_chatty flag alows us to control whether a given rpc client leaves
"server X not responding, timed out"
messages in the syslog. Such messages make sense for ordinary nfs
clients (where an unresponsive server means applications on the
mountpoint are probably hanging), but not for the callback client (which
can fail more commonly, with the only result just of disabling some
optimizations).
Previously cl_chatty was removed, do to lack of users; reinstate it, and
use it for the nfsd's callback client.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It's not immediately obvious from the code why we're doing this.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Benny Halevy <bhalevy@panasas.com>
In preparation for minorversion 1
All encoders now return an nfserr status (typically their
nfserr argument). Unsupported ops go through nfsd4_encode_operation
too, so use nfsd4_encode_noop to encode nothing for their reply body.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Have separate vectors of operation decoders for each minorversion.
Obsolete ops in newer minorversions have default implementation returning
nfserr_opnotsupp.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Check minorversion once before decoding any operation and reject with
nfserr_minor_vers_mismatch if != 0 (this still happens in nfsd4_proc_compound).
In this case return a zero length resultdata array as required by RFC3530.
minorversion 1 processing will have its own vector of decoders.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Multiple mnt_want_write() calls in the switch statement looks really
ugly.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
knfsd currently uses 2 signal masks when processing requests. A "loose"
mask (SHUTDOWN_SIGS) that it uses when receiving network requests, and
then a more "strict" mask (ALLOWED_SIGS, which is just SIGKILL) that it
allows when doing the actual operation on the local storage.
This is apparently unnecessarily complicated. The underlying filesystem
should be able to sanely handle a signal in the middle of an operation.
This patch removes the signal mask handling from knfsd altogether. When
knfsd is started as a kthread, all signals are ignored. It then allows
all of the signals in SHUTDOWN_SIGS. There's no need to set the mask
as well.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Thanks to Frank Van Maarseveen for the original problem report: "A
privileged process on an NFS client which drops privileges after using
them to change the current working directory, will experience incorrect
EACCES after an NFS server reboot. This problem can also occur after
memory pressure on the server, particularly when the client side is
quiet for some time."
This occurs because the filehandle points to a directory whose parents
are no longer in the dentry cache, and we're attempting to reconnect the
directory to its parents without adequate permissions to perform lookups
in the parent directories.
We can therefore fix the problem by acquiring the necessary capabilities
before attempting the reconnection. We do this only in the
no_subtree_check case, since the documented behavior of the
subtree_check export option requires the server to check that the user
has lookup permissions on all parents.
The subtree_check case still has a problem, since reconnect_path()
unnecessarily requires both read and lookup permissions on all parent
directories. However, a fix in that case would be more delicate, and
use of subtree_check is already discouraged for other reasons.
Signed-off-by: Neil Brown <neilb@suse.de>
Cc: Frank van Maarseveen <frankvm@frankvm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Rename nfsd_permission() specific MAY_* flags to NFSD_MAY_* to make it
clear, that these are not used outside nfsd, and to avoid name and
number space conflicts with the VFS.
[comment from hch: rename MAY_READ, MAY_WRITE and MAY_EXEC as well]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
OCFS2 can return -ERESTARTSYS from write requests (and possibly
elsewhere) if there is a signal pending.
If nfsd is shutdown (by sending a signal to each thread) while there
is still an IO load from the client, each thread could handle one last
request with a signal pending. This can result in -ERESTARTSYS
which is not understood by nfserrno() and so is reflected back to
the client as nfserr_io aka -EIO. This is wrong.
Instead, interpret ERESTARTSYS to mean "try again later" by returning
nfserr_jukebox. The client will resend and - if the server is
restarted - the write will (hopefully) be successful and everyone will
be happy.
The symptom that I narrowed down to this was:
copy a large file via NFS to an OCFS2 filesystem, and restart
the nfs server during the copy.
The 'cp' might get an -EIO, and the file will be corrupted -
presumably holes in the middle where writes appeared to fail.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We need the nfsd_mutex before accessing nfsd_serv->sv_nrthreads or we
can't even guarantee nfsd_serv will still be there.
Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Since we no longer make any distinction between shutdown signals with
nfsd, then it becomes easier to just standardize on a particular signal
to use to bring it down (SIGINT, in this case).
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This patch is rather large, but I couldn't figure out a way to break it
up that would remain bisectable. It does several things:
- change svc_thread_fn typedef to better match what kthread_create expects
- change svc_pool_map_set_cpumask to be more kthread friendly. Make it
take a task arg and and get rid of the "oldmask"
- have svc_set_num_threads call kthread_create directly
- eliminate __svc_create_thread
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The special handling for SIGHUP in knfsd is a holdover from much
earlier versions of Linux where reloading the export table was
more expensive. That facility is not really needed anymore and
to my knowledge, is seldom-used.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Several of the nfsd filesystem interfaces allow changes to parameters
that don't have any effect on a running nfsd service. They are only ever
checked when nfsd is started. This patch fixes it so that changes to
those procfiles return -EBUSY if nfsd is already running to make it
clear that changes on the fly don't work.
The patch should also close some relatively harmless races between
changing the info in those interfaces and starting nfsd, since these
variables are being moved under the protection of the nfsd_mutex.
Finally, the nfsv4recoverydir file always returns -EINVAL if read. This
patch fixes it to return the recoverydir path as expected.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This removes the BKL from the RPC service creation codepath. The BKL
really isn't adequate for this job since some of this info needs
protection across sleeps.
Also, add some comments to try and clarify how the locking should work
and to make it clear that the BKL isn't necessary as long as there is
adequate locking between tasks when touching the svc_serv fields.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
WRITEMEM zeroes the last word in the destination buffer
for padding purposes, but this must not be done if
no bytes are to be copied, as it would result
in zeroing of the word right before the array.
The current implementation works since it's always called
with non zero nbytes or it follows an encoding of the
string (or opaque) length which, if equal to zero,
can be overwritten with zero.
Nevertheless, it seems safer to check for this case.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We already print each operation of the compound when debugging is turned
on; printing the result could also help with remote debugging.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
These bit operations don't need to be atomic. They're all done under a
single big mutex anyway.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to
main tree.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Presumably this is left over from earlier drafts of v4, which listed
TIME_METADATA as writeable. It's read-only in rfc 3530, and shouldn't
be modifiable anyway.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The file_lock structure is used both as a heavy-weight representation of
an active lock, with pointers to reference-counted structures, etc., and
as a simple container for parameters that describe a file lock.
The conflicting lock returned from __posix_lock_file is an example of
the latter; so don't call the filesystem or lock manager callbacks when
copying to it. This also saves the need for an unnecessary
locks_init_lock in the nfsv4 server.
Thanks to Trond for pointing out the error.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Add /proc/fs/nfsd/unlock_filesystem, which allows e.g.:
shell> echo /mnt/sfs1 > /proc/fs/nfsd/unlock_filesystem
so that a filesystem can be unmounted before allowing a peer nfsd to
take over nfs service for the filesystem.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Cc: Lon Hohberger <lhh@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
fs/lockd/svcsubs.c | 66 +++++++++++++++++++++++++++++++++++++++-----
fs/nfsd/nfsctl.c | 65 +++++++++++++++++++++++++++++++++++++++++++
include/linux/lockd/lockd.h | 7 ++++
3 files changed, 131 insertions(+), 7 deletions(-)
For high-availability NFS service, we generally need to be able to drop
file locks held on the exported filesystem before moving clients to a
new server. Currently the only way to do that is by shutting down lockd
entirely, which is often undesireable (for example, if you want to
continue exporting other filesystems).
This patch allows the administrator to release all locks held by clients
accessing the client through a given server ip address, by echoing that
address to a new file, /proc/fs/nfsd/unlock_ip, as in:
shell> echo 10.1.1.2 > /proc/fs/nfsd/unlock_ip
The expected sequence of events can be:
1. Tear down the IP address
2. Unexport the path
3. Write IP to /proc/fs/nfsd/unlock_ip to unlock files
4. Signal peer to begin take-over.
For now we only support IPv4 addresses and NFSv2/v3 (NFSv4 locks are not
affected).
Also, if unmounting the filesystem is required, we assume at step 3 that
clients using the given server ip are the only clients holding locks on
the given filesystem; otherwise, an additional patch is required to
allow revoking all locks held by lockd on a given filesystem.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com>
Cc: Lon Hohberger <lhh@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
fs/lockd/svcsubs.c | 66 +++++++++++++++++++++++++++++++++++++++-----
fs/nfsd/nfsctl.c | 65 +++++++++++++++++++++++++++++++++++++++++++
include/linux/lockd/lockd.h | 7 ++++
3 files changed, 131 insertions(+), 7 deletions(-)
Currently, knfsd only clears the setuid bit if the owner of a file is
changed on a SETATTR call, and only clears the setgid bit if the group
is changed. POSIX says this in the spec for chown():
"If the specified file is a regular file, one or more of the
S_IXUSR, S_IXGRP, or S_IXOTH bits of the file mode are set, and the
process does not have appropriate privileges, the set-user-ID
(S_ISUID) and set-group-ID (S_ISGID) bits of the file mode shall
be cleared upon successful return from chown()."
If I'm reading this correctly, then knfsd is doing this wrong. It should
be clearing both the setuid and setgid bit on any SETATTR that changes
the uid or gid. This wasn't really as noticable before, but now that the
ATTR_KILL_S*ID bits are a no-op for the NFS client, it's more evident.
This patch corrects the nfsd_setattr logic so that this occurs. It also
does a bit of cleanup to the function.
There is also one small behavioral change. If a SETATTR call comes in
that changes the uid/gid and the mode, then we now only clear the setgid
bit if the group execute bit isn't set. The setgid bit without a group
execute bit signifies mandatory locking and we likely don't want to
clear the bit in that case. Since there is no call in POSIX that should
generate a SETATTR call like this, then this should rarely happen, but
it's worth noting.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There's no need to dynamically allocate this memory, and doing so may
create the possibility of races on shutdown of the rpc client. (We've
witnessed it only after adding rpcsec_gss support to the server, after
which the rpc code can send destroys calls that expect to still be able
to access the rpc_stats structure after it has been destroyed.)
Such races are in theory possible if the module containing this "static"
memory is removed very quickly after an rpc client is destroyed, but
we haven't seen that happen.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Move the code that actually parses the filehandle and looks up the
dentry and export to a separate function. This simplifies the reference
counting a little and moves fh_verify() a little closer to the kernel
ideal of small, minimally-indentended functions. Clean up a few other
minor style sins along the way.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Neil Brown <neilb@suse.de>
While lease is correctly checked by supplying the type argument to
vfs_setlease(), it's stored with fl_type uninitialized. This breaks the
logic when checking the type of the lease. The fix is to initialize
fl_type.
The old code still happened to function correctly since F_RDLCK is zero,
and we only implement read delegations currently (nor write
delegations). But that's no excuse for not fixing this.
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
fs/nfsd/vfs.c:991:27: warning: Using plain integer as NULL pointer
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Add extern to nfsd/nfsd.h
fs/nfsd/nfssvc.c:146:5: warning: symbol 'nfsd_nrthreads' was not declared. Should it be static?
fs/nfsd/nfssvc.c:261:5: warning: symbol 'nfsd_nrpools' was not declared. Should it be static?
fs/nfsd/nfssvc.c:269:5: warning: symbol 'nfsd_get_nrthreads' was not declared. Should it be static?
fs/nfsd/nfssvc.c:281:5: warning: symbol 'nfsd_set_nrthreads' was not declared. Should it be static?
fs/nfsd/export.c:1534:23: warning: symbol 'nfs_exports_op' was not declared. Should it be static?
Add include of auth.h
fs/nfsd/auth.c:27:5: warning: symbol 'nfsd_setuser' was not declared. Should it be static?
Make static, move forward declaration closer to where it's needed.
fs/nfsd/nfs4state.c:1877:1: warning: symbol 'laundromat_main' was not declared. Should it be static?
Make static, forward declaration was already marked static.
fs/nfsd/nfs4idmap.c:206:1: warning: symbol 'idtoname_parse' was not declared. Should it be static?
fs/nfsd/vfs.c:1156:1: warning: symbol 'nfsd_create_setattr' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This patch makes the needlessly global nfsd_create_setattr() static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Likewise, distros usually leave CONFIG_NFSD_TCP enabled.
TCP support in the Linux NFS server is stable enough that we can leave it
on always. CONFIG_NFSD_TCP adds about 10 lines of code, and defaults to
"Y" anyway.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The code here is difficult to understand; attempt to clarify somewhat by
pulling out one of the more mystifying conditionals into a separate
function.
While we're here, also add lease_time to the list of attributes that we
don't really need to cross a mountpoint to fetch.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Peter Staubach <staubach@redhat.com>
This adds IPv6 support to the interfaces that are used to express nfsd
exports. All addressed are stored internally as IPv6; backwards
compatibility is maintained using mapped addresses.
Thanks to Bruce Fields, Brian Haley, Neil Brown and Hideaki Joshifuji
for comments
Signed-off-by: Aurelien Charbon <aurelien.charbon@bull.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Brian Haley <brian.haley@hp.com>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
If we depend on the inodes for writeability, we will not catch the r/o mounts
when implemented.
This patches uses __mnt_want_write(). It does not guarantee that the mount
will stay writeable after the check. But, this is OK for one of the checks
because it is just for a printk().
The other two are probably unnecessary and duplicate existing checks in the
VFS. This won't make them better checks than before, but it will make them
detect r/o mounts.
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This basically audits the callers of xattr_permission(), which calls
permission() and can perform writes to the filesystem.
[AV: add missing parts - removexattr() and nfsd posix acls, plug for a leak
spotted by Miklos]
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This also uses the little helper in the NFS code to make an if() a little bit
less ugly. We introduced the helper at the beginning of the series.
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This takes care of all of the direct callers of vfs_mknod().
Since a few of these cases also handle normal file creation
as well, this also covers some calls to vfs_create().
So that we don't have to make three mnt_want/drop_write()
calls inside of the switch statement, we move some of its
logic outside of the switch and into a helper function
suggested by Christoph.
This also encapsulates a fix for mknod(S_IFREG) that Miklos
found.
[AV: merged mkdir handling, added missing nfsd pieces]
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Elevate the write count during the vfs_rmdir() and vfs_unlink().
[AV: merged rmdir and unlink parts, added missing pieces in nfsd]
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If someone decides to demote a file from r/w to just
r/o, they can use this same code as __fput().
NFS does just that, and will use this in the next
patch.
AV: drop write access in __fput() only after we evict from file list.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Cc: Erez Zadok <ezk@cs.sunysb.edu>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J Bruce Fields" <bfields@fieldses.org>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This bug was always here, but before my commit 6fa02839bf
("recheck for secure ports in fh_verify"), it could only be triggered by
failure of a kmalloc(). After that commit it could be triggered by a
client making a request from a non-reserved port for access to an export
marked "secure". (Exports are "secure" by default.)
The result is a struct svc_export with a reference count one too low,
resulting in likely oopses next time the export is accessed.
The reference counting here is not straightforward; a later patch will
clean up fh_verify().
Thanks to Lukas Hejtmanek for the bug report and followup.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Lukas Hejtmanek <xhejtman@ics.muni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sorry for the noise, but here's the v3 of this compilation fix :)
There are some places, which declare the char buf[...] on the stack
to push it later into dprintk(). Since the dprintk sometimes (if the
CONFIG_SYSCTL=n) becomes an empty do { } while (0) stub, these buffers
cause gcc to produce appropriate warnings.
Wrap these buffers with RPC_IFDEBUG macro, as Trond proposed, to
compile them out when not needed.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
d_path() is used on a <dentry,vfsmount> pair. Lets use a struct path to
reflect this.
[akpm@linux-foundation.org: fix build in mm/memory.c]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Acked-by: Bryan Wu <bryan.wu@analog.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
seq_path() is always called with a dentry and a vfsmount from a struct path.
Make seq_path() take it directly as an argument.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'm embedding struct path into struct svc_expkey.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add path_put() functions for releasing a reference to the dentry and
vfsmount of a struct path in the right order
* Switch from path_release(nd) to path_put(&nd->path)
* Rename dput_path() to path_put_conditional()
[akpm@linux-foundation.org: fix cifs]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the central patch of a cleanup series. In most cases there is no good
reason why someone would want to use a dentry for itself. This series reflects
that fact and embeds a struct path into nameidata.
Together with the other patches of this series
- it enforced the correct order of getting/releasing the reference count on
<dentry,vfsmount> pairs
- it prepares the VFS for stacking support since it is essential to have a
struct path in every place where the stack can be traversed
- it reduces the overall code size:
without patch series:
text data bss dec hex filename
5321639 858418 715768 6895825 6938d1 vmlinux
with patch series:
text data bss dec hex filename
5320026 858418 715768 6894212 693284 vmlinux
This patch:
Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix cifs]
[akpm@linux-foundation.org: fix smack]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patch supports legacy (32-bit) capability userspace, and where possible
translates 32-bit capabilities to/from userspace and the VFS to 64-bit
kernel space capabilities. If a capability set cannot be compressed into
32-bits for consumption by user space, the system call fails, with -ERANGE.
FWIW libcap-2.00 supports this change (and earlier capability formats)
http://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
[akpm@linux-foundation.org: coding-syle fixes]
[akpm@linux-foundation.org: use get_task_comm()]
[ezk@cs.sunysb.edu: build fix]
[akpm@linux-foundation.org: do not initialise statics to 0 or NULL]
[akpm@linux-foundation.org: unused var]
[serue@us.ibm.com: export __cap_ symbols]
Signed-off-by: Andrew G. Morgan <morgan@kernel.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: James Morris <jmorris@namei.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Neil Brown points out that we're checking buf[size-1] in a couple places
without first checking whether size is zero.
Actually, given the implementation of simple_transaction_get(), buf[-1]
is zero, so in both of these cases the subsequent check of the value of
buf[size-1] will catch this case.
But it seems fragile to depend on that, so add explicit checks for this
case.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Acked-by: NeilBrown <neilb@suse.de>
Neither EPERM and ENOENT map to valid errors for PUTROOTFH according to
rfc 3530, and, if anything, ENOENT is likely to be slightly more
informative; so don't bother mapping ENOENT to EPERM. (Probably this
was originally done because one likely cause was that there is an fsid=0
export but that it isn't permitted to this particular client. Now that
we allow WRONGSEC returns, this is somewhat less likely.)
In the long term we should work to make this situation less likely,
perhaps by turning off nfsv4 service entirely in the absence of the
pseudofs root, or constructing a pseudofilesystem root ourselves in the
kernel as necessary.
Thanks to Benny Halevy <bhalevy@panasas.com> for pointing out this
problem.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Benny Halevy <bhalevy@panasas.com>
Create a transport independent version of the svc_sock_names function.
The toclose capability of the svc_sock_names service can be implemented
using the svc_xprt_find and svc_xprt_close services.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Update the write handler for the portlist file to allow creating new
listening endpoints on a transport. The general form of the string is:
<transport_name><space><port number>
For example:
echo "tcp 2049" > /proc/fs/nfsd/portlist
This is intended to support the creation of a listening endpoint for
RDMA transports without adding #ifdef code to the nfssvc.c file.
Transports can also be removed as follows:
'-'<transport_name><space><port number>
For example:
echo "-tcp 2049" > /proc/fs/nfsd/portlist
Attempting to add a listener with an invalid transport string results
in EPROTONOSUPPORT and a perror string of "Protocol not supported".
Attempting to remove an non-existent listener (.e.g. bad proto or port)
results in ENOTCONN and a perror string of
"Transport endpoint is not connected"
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Move sk_list and sk_ready to svc_xprt. This involves close because these
lists are walked by svcs when closing all their transports. So I combined
the moving of these lists to svc_xprt with making close transport independent.
The svc_force_sock_close has been changed to svc_close_all and takes a list
as an argument. This removes some svc internals knowledge from the svcs.
This code races with module removal and transport addition.
Thanks to Simon Holm Thøgersen for a compile fix.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Simon Holm Thøgersen <odie@cs.aau.dk>
Modify the various kernel RPC svcs to use the svc_create_xprt service.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Document these checks a little better and inline, as suggested by Neil
Brown (note both functions have two callers). Remove an obviously bogus
check while we're there (checking whether unsigned value is negative).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Neil Brown <neilb@suse.de>
The server silently ignores attempts to set the uid and gid on create.
Based on the comment, this appears to have been done to prevent some
overly-clever IRIX client from causing itself problems.
Perhaps we should remove that hack completely. For now, at least, it
makes sense to allow root (when no_root_squash is set) to set uid and
gid.
While we're there, since nfsd_create and nfsd_create_v3 share the same
logic, pull that out into a separate function. And spell out the
individual modifications of ia_valid instead of doing them both at once
inside a conditional.
Thanks to Roger Willcocks <roger@filmlight.ltd.uk> for the bug report
and original patch on which this is based.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This patch addresses a compatibility issue with a Linux NFS server and
AIX NFS client.
I have exported /export as fsid=0 with sec=krb5:krb5i
I have mount --bind /home onto /export/home
I have exported /export/home with sec=krb5i
The AIX client mounts / -o sec=krb5:krb5i onto /mnt
If I do an ls /mnt, the AIX client gets a permission error. Looking at
the network traceIwe see a READDIR looking for attributes
FATTR4_RDATTR_ERROR and FATTR4_MOUNTED_ON_FILEID. The response gives a
NFS4ERR_WRONGSEC which the AIX client is not expecting.
Since the AIX client is only asking for an attribute that is an
attribute of the parent file system (pseudo root in my example), it
seems reasonable that there should not be an error.
In discussing this issue with Bruce Fields, I initially proposed
ignoring the error in nfsd4_encode_dirent_fattr() if all that was being
asked for was FATTR4_RDATTR_ERROR and FATTR4_MOUNTED_ON_FILEID, however,
Bruce suggested that we avoid calling cross_mnt() if only these
attributes are requested.
The following patch implements bypassing cross_mnt() if only
FATTR4_RDATTR_ERROR and FATTR4_MOUNTED_ON_FILEID are called. Since there
is some complexity in the code in nfsd4_encode_fattr(), I didn't want to
duplicate code (and introduce a maintenance nightmare), so I added a
parameter to nfsd4_encode_fattr() that indicates whether it should
ignore cross mounts and simply fill in the attribute using the passed in
dentry as opposed to it's parent.
Signed-off-by: Frank Filz <ffilzlnx@us.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The failure to return a stateowner from nfs4_preprocess_seqid_op() means
in the case where a lock request is of a type incompatible with an open
(due to, e.g., an application attempting a write lock on a file open for
read), means that fs/nfsd/nfs4xdr.c:ENCODE_SEQID_OP_TAIL() never bumps
the seqid as it should. The client, attempting to close the file
afterwards, then gets an (incorrect) bad sequence id error. Worse, this
prevents the open file from ever being closed, so we leak state.
Thanks to Benny Halevy and Trond Myklebust for analysis, and to Steven
Wilton for the report and extensive data-gathering.
Cc: Benny Halevy <bhalevy@panasas.com>
Cc: Steven Wilton <steven.wilton@team.eftel.com.au>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
When the callback channel fails, we inform the client of that by
returning a cb_path_down error the next time it tries to renew its
lease.
If we wait most of a lease period before deciding that a callback has
failed and that the callback channel is down, then we decrease the
chances that the client will find out in time to do anything about it.
So, mark the channel down as soon as we recognize that an rpc has
failed. However, continue trying to recall delegations anyway, in hopes
it will come back up. This will prevent more delegations from being
given out, and ensure cb_path_down is returned to renew calls earlier,
while still making the best effort to deliver recalls of existing
delegations.
Also fix a couple comments and remove a dprink that doesn't seem likely
to be useful.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Declare this variable in the one function where it's used, and clean up
some minor style problems.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We generate a unique cl_confirm for every new client; so if we've
already checked that this cl_confirm agrees with the cl_confirm of
unconf, then we already know that it does not agree with the cl_confirm
of conf.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Again, the only way conf and unconf can have the same clientid is if
they were created in the "probable callback update" case of setclientid,
in which case we already know that the cl_verifier fields must agree.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
If conf and unconf are both found in the lookup by cl_clientid, then
they share the same cl_clientid. We always create a unique new
cl_clientid field when creating a new client--the only exception is the
"probable callback update" case in setclientid, where we copy the old
cl_clientid from another clientid with the same name.
Therefore two clients with the same cl_client field also always share
the same cl_name field, and a couple of the checks here are redundant.
Thanks to Simon Holm Thøgersen for a compile fix.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Simon Holm Thøgersen <odie@cs.aau.dk>
Using a counter instead of the nanoseconds value seems more likely to
produce a unique cl_confirm.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We're supposed to generate a different cl_confirm verifier for each new
client, so these to cl_confirm values should never be the same.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Most of these comments just summarize the code.
The matching of code to the cases described in the RFC may still be
useful, though; add specific section references to make that easier to
follow. Also update references to the outdated RFC 3010.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
While we're here, let's remove the redundant (and now wrong) pathname in
the comment, and the #ifdef __KERNEL__'s.
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This header is used only in a few places in fs/nfsd, so there seems to
be little point to having it in include/. (Thanks to Robert Day for
pointing this out.)
Cc: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Newer server features such as nfsv4 and gss depend on proc to work, so a
failure to initialize the proc files they need should be treated as
fatal.
Thanks to Andrew Morton for style fix and compile fix in case where
CONFIG_NFSD_V4 is undefined.
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
I assume the reason failure of creation was ignored here was just to
continue support embedded systems that want nfsd but not proc.
However, in cases where proc is supported it would be clearer to fail
entirely than to come up with some features disabled.
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There's really nothing much the caller can do if cache unregistration
fails. And indeed, all any caller does in this case is print an error
and continue. So just return void and move the printk's inside
cache_unregister.
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
If the reply cache initialization fails due to a kmalloc failure,
currently we try to soldier on with a reduced (or nonexistant) reply
cache.
Better to just fail immediately: the failure is then much easier to
understand and debug, and it could save us complexity in some later
code. (But actually, it doesn't help currently because the cache is
also turned off in some odd failure cases; we should probably find a
better way to handle those failure cases some day.)
Fix some minor style problems while we're at it, and rename
nfsd_cache_init() to remove the need for a comment describing it.
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Handle the failure case here with something closer to the standard
kernel style.
Doesn't really matter for now, but I'd like to add a few more failure
cases, and then this'll help.
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We forgot to shut down the nfs4 state and idmapping code in this case.
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The length "nbytes" passed into read_buf should never be negative, but
we check only for too-large values of "nbytes", not for too-small
values. Make nbytes unsigned, so it's clear that the former tests are
sufficient. (Despite this read_buf() currently correctly returns an xdr
error in the case of a negative length, thanks to an unsigned
comparison with size_of() and bounds-checking in kmalloc(). This seems
very fragile, though.)
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: path name lengths are unsigned on the wire, negative lengths
are not meaningful natively either.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-By: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: adjust the sign of the length argument of nfsd_lookup and
nfsd_lookup_dentry, for consistency with recent changes. NFSD version
4 callers already pass an unsigned file name length.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-By: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Clean up: file name lengths are unsigned on the wire, negative lengths
are not meaningful natively either.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-By: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Obviously at some point we thought "error" represented the length when
positive. This appears to be a long-standing typo.
Thanks to Prasad Potluri <pvp@us.ibm.com> for finding the problem and
proposing an earlier version of this patch.
Cc: Steve French <smfltc@us.ibm.com>
Cc: Prasad V Potluri <pvp@us.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Dereferenced pointer "dentry" without checking and assigned to inode
in the declaration.
(We could just delete the NULL checks that follow instead, as we never
get to the encode function in this particular case. But it takes a
little detective work to verify that fact, so it's probably safer to
leave the checks in place.)
Cc: Steve French <smfltc@us.ibm.com>
Signed-off-by: Prasad V Potluri <pvp@us.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The whole reason to move this callback-channel probe into a separate
thread was because (for now) we don't have an easy way to create the
rpc_client asynchronously. But I forgot to move the rpc_create() to the
spawned thread. Doh! Fix that.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Our callback code doesn't actually handle concurrent attempts to probe
the callback channel. Some rethinking of the locking may be required.
However, we can also just move the callback probing to this case. Since
this is the only time a client is "confirmed" (and since that can only
happen once in the lifetime of a client), this ensures we only probe
once.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
When RPCSEC/GSS and krb5i is used, requests are padded, typically to a multiple
of 8 bytes. This can make the request look slightly longer than it
really is.
As of
f34b95689d "The NFSv2/NFSv3 server does not handle zero
length WRITE request correctly",
the xdr decode routines for NFSv2 and NFSv3 reject requests that aren't
the right length, so krb5i (for example) WRITE requests can get lost.
This patch relaxes the appropriate test and enhances the related comment.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Peter Staubach <staubach@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As with commit 7fc90ec93a ("knfsd: nfsd:
call nfsd_setuser() on fh_compose(), fix nfsd4 permissions problem")
this is a case where we need to redo a security check in fh_verify()
even though the filehandle already has an associated dentry--if the
filehandle was created by fh_compose() in an earlier operation of the
nfsv4 compound, then we may not have done these checks yet.
Without this fix it is possible, for example, to traverse from an export
without the secure ports requirement to one with it in a single
compound, and bypass the secure port check on the new export.
While we're here, fix up some minor style problems and change a printk()
to a dprintk(), to make it harder for random unprivileged users to spam
the logs.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Reviewed-By: NeilBrown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The v2/v3 acl code in nfsd is translating any return from fh_verify() to
nfserr_inval. This is particularly unfortunate in the case of an
nfserr_dropit return, which is an internal error meant to indicate to
callers that this request has been deferred and should just be dropped
pending the results of an upcall to mountd.
Thanks to Roland <devzero@web.de> for bug report and data collection.
Cc: Roland <devzero@web.de>
Acked-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Reviewed-By: NeilBrown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Not architecture specific code should not #include <asm/scatterlist.h>.
This patch therefore either replaces them with
#include <linux/scatterlist.h> or simply removes them if they were
unused.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* 'sg' of git://git.kernel.dk/linux-2.6-block:
Add CONFIG_DEBUG_SG sg validation
Change table chaining layout
Update arch/ to use sg helpers
Update swiotlb to use sg helpers
Update net/ to use sg helpers
Update fs/ to use sg helpers
[SG] Update drivers to use sg helpers
[SG] Update crypto/ to sg helpers
[SG] Update block layer to use sg helpers
[SG] Add helpers for manipulating SG entries
Now that all filesystems are converted remove support for the old methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: David Chinner <dgc@sgi.com>
Cc: Timothy Shimmin <tes@sgi.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset is a medium scale rewrite of the export operations interface.
The goal is to make the interface less complex, and easier to understand from
the filesystem side, aswell as preparing generic support for exporting of
64bit inode numbers.
This touches all nfs exporting filesystems, and I've done testing on all of
the filesystems I have here locally (xfs, ext2, ext3, reiserfs, jfs)
This patch:
Add a structured fid type so that we don't have to pass an array of u32 values
around everywhere. It's a union of possible layouts.
As a start there's only the u32 array and the traditional 32bit inode format,
but there will be more in one of my next patchset when I start to document the
various filehandle formats we have in lowlevel filesystems better.
Also add an enum that gives the various filehandle types human- readable
names.
Note: Some people might think the struct containing an anonymous union is
ugly, but I didn't want to pass around a raw union type.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: David Chinner <dgc@sgi.com>
Cc: Timothy Shimmin <tes@sgi.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.
The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.
[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's theoretically possible for a single SETATTR call to come in that sets the
mode and the uid/gid. In that case, don't set the ATTR_KILL_S*ID bits since
that would trip the BUG() in notify_change. Just fix up the mode to have the
same effect.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement file posix capabilities. This allows programs to be given a
subset of root's powers regardless of who runs them, without having to use
setuid and giving the binary all of root's powers.
This version works with Kaigai Kohei's userspace tools, found at
http://www.kaigai.gr.jp/index.php. For more information on how to use this
patch, Chris Friedhoff has posted a nice page at
http://www.friedhoff.org/fscaps.html.
Changelog:
Nov 27:
Incorporate fixes from Andrew Morton
(security-introduce-file-caps-tweaks and
security-introduce-file-caps-warning-fix)
Fix Kconfig dependency.
Fix change signaling behavior when file caps are not compiled in.
Nov 13:
Integrate comments from Alexey: Remove CONFIG_ ifdef from
capability.h, and use %zd for printing a size_t.
Nov 13:
Fix endianness warnings by sparse as suggested by Alexey
Dobriyan.
Nov 09:
Address warnings of unused variables at cap_bprm_set_security
when file capabilities are disabled, and simultaneously clean
up the code a little, by pulling the new code into a helper
function.
Nov 08:
For pointers to required userspace tools and how to use
them, see http://www.friedhoff.org/fscaps.html.
Nov 07:
Fix the calculation of the highest bit checked in
check_cap_sanity().
Nov 07:
Allow file caps to be enabled without CONFIG_SECURITY, since
capabilities are the default.
Hook cap_task_setscheduler when !CONFIG_SECURITY.
Move capable(TASK_KILL) to end of cap_task_kill to reduce
audit messages.
Nov 05:
Add secondary calls in selinux/hooks.c to task_setioprio and
task_setscheduler so that selinux and capabilities with file
cap support can be stacked.
Sep 05:
As Seth Arnold points out, uid checks are out of place
for capability code.
Sep 01:
Define task_setscheduler, task_setioprio, cap_task_kill, and
task_setnice to make sure a user cannot affect a process in which
they called a program with some fscaps.
One remaining question is the note under task_setscheduler: are we
ok with CAP_SYS_NICE being sufficient to confine a process to a
cpuset?
It is a semantic change, as without fsccaps, attach_task doesn't
allow CAP_SYS_NICE to override the uid equivalence check. But since
it uses security_task_setscheduler, which elsewhere is used where
CAP_SYS_NICE can be used to override the uid equivalence check,
fixing it might be tough.
task_setscheduler
note: this also controls cpuset:attach_task. Are we ok with
CAP_SYS_NICE being used to confine to a cpuset?
task_setioprio
task_setnice
sys_setpriority uses this (through set_one_prio) for another
process. Need same checks as setrlimit
Aug 21:
Updated secureexec implementation to reflect the fact that
euid and uid might be the same and nonzero, but the process
might still have elevated caps.
Aug 15:
Handle endianness of xattrs.
Enforce capability version match between kernel and disk.
Enforce that no bits beyond the known max capability are
set, else return -EPERM.
With this extra processing, it may be worth reconsidering
doing all the work at bprm_set_security rather than
d_instantiate.
Aug 10:
Always call getxattr at bprm_set_security, rather than
caching it at d_instantiate.
[morgan@kernel.org: file-caps clean up for linux/capability.h]
[bunk@kernel.org: unexport cap_inode_killpriv]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Andrew Morgan <morgan@kernel.org>
Signed-off-by: Andrew Morgan <morgan@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'm going to be modifying nfsd_rename() shortly to support read-only bind
mounts. This #ifdef is around the area I'm patching, and it starts to get
really ugly if I just try to add my new code by itself. Using this little
helper makes things a lot cleaner to use.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch makes the following needlessly global functions static:
- exp_get_by_name()
- exp_parent()
- exp_find()
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'locks' of git://linux-nfs.org/~bfields/linux:
nfsd: remove IS_ISMNDLCK macro
Rework /proc/locks via seq_files and seq_list helpers
fs/locks.c: use list_for_each_entry() instead of list_for_each()
NFS: clean up explicit check for mandatory locks
AFS: clean up explicit check for mandatory locks
9PFS: clean up explicit check for mandatory locks
GFS2: clean up explicit check for mandatory locks
Cleanup macros for distinguishing mandatory locks
Documentation: move locks.txt in filesystems/
locks: add warning about mandatory locking races
Documentation: move mandatory locking documentation to filesystems/
locks: Fix potential OOPS in generic_setlease()
Use list_first_entry in locks_wake_up_blocks
locks: fix flock_lock_file() comment
Memory shortage can result in inconsistent flocks state
locks: kill redundant local variable
locks: reverse order of posix_locks_conflict() arguments
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (131 commits)
NFSv4: Fix a typo in nfs_inode_reclaim_delegation
NFS: Add a boot parameter to disable 64 bit inode numbers
NFS: nfs_refresh_inode should clear cache_validity flags on success
NFS: Fix a connectathon regression in NFSv3 and NFSv4
NFS: Use nfs_refresh_inode() in ops that aren't expected to change the inode
SUNRPC: Don't call xprt_release in call refresh
SUNRPC: Don't call xprt_release() if call_allocate fails
SUNRPC: Fix buggy UDP transmission
[23/37] Clean up duplicate includes in
[2.6 patch] net/sunrpc/rpcb_clnt.c: make struct rpcb_program static
SUNRPC: Use correct type in buffer length calculations
SUNRPC: Fix default hostname created in rpc_create()
nfs: add server port to rpc_pipe info file
NFS: Get rid of some obsolete macros
NFS: Simplify filehandle revalidation
NFS: Ensure that nfs_link() returns a hashed dentry
NFS: Be strict about dentry revalidation when doing exclusive create
NFS: Don't zap the readdir caches upon error
NFS: Remove the redundant nfs_reval_fsid()
NFSv3: Always use directory post-op attributes in nfs3_proc_lookup
...
Fix up trivial conflict due to sock_owned_by_user() cleanup manually in
net/sunrpc/xprtsock.c
This macro is only used in one place; in this place it seems simpler to
put open-code it and move the comment to where it's used.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The combination of S_ISGID bit set and S_IXGRP bit unset is used to mark the
inode as "mandatory lockable" and there's a macro for this check called
MANDATORY_LOCK(inode). However, fs/locks.c and some filesystems still perform
the explicit i_mode checking. Besides, Andrew pointed out, that this macro is
buggy itself, as it dereferences the inode arg twice.
Convert this macro into static inline function and switch its users to it,
making the code shorter and more readable.
The __mandatory_lock() helper is to be used in places where the IS_MANDLOCK()
for superblock is already known to be true.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Without this we always return 2^32-1 as the the maximum namelength.
Thanks to Andreas Gruenbacher for bug report and testing.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Andreas Gruenbacher <agruen@suse.de>
It's not enough to take a reference on the delegation object itself; we
need to ensure that the rpc_client won't go away just as we're about to
make an rpc call.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
If a callback still holds a reference on the client, then it may be
about to perform an rpc call, so it isn't safe to call rpc_shutdown().
(Though rpc_shutdown() does wait for any outstanding rpc's, it can't
know if a new rpc is about to be issued with that client.)
So, wait to shutdown the rpc_client until the reference count on the
client has gone to zero.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Currently there's a race that can cause an oops in generic_setlease.
(In detail: nfsd, when it removes a lease, does so by calling
vfs_setlease() with F_UNLCK and a pointer to the fl_flock field, which
in turn points to nfsd's existing lease; but the first thing the
setlease code does is call time_out_leases(). If the lease happens to
already be beyond the lease break time, that will free the lease and (in
nfsd's release_private callback) set fl_flock to NULL, leading to a NULL
deference soon after in vfs_setlease().)
There are probably other things to fix here too, but it seems inherently
racy to allow either locks.c or nfsd to time out this lease. Instead
just set the fl_break_time to 0 (preventing locks.c from ever timing out
this lock) and leave it up to nfsd's laundromat thread to deal with it.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Modify the NFS server code to support 64 bit ino's, as
appropriate for the system and the NFS protocol version.
The gist of the changes is to query the underlying file system
for attributes and not just to use the cached attributes in the
inode. For this specific purpose, the inode only contains an
ino field which unsigned long, which is large enough on 64 bit
platforms, but is not large enough on 32 bit platforms.
I haven't been able to find any reason why ->getattr can't be called
while i_mutex. The specification indicates that i_mutex is not
required to be held in order to invoke ->getattr, but it doesn't say
that i_mutex can't be held while invoking ->getattr.
I also haven't come to any conclusions regarding the value of
lease_get_mtime() and whether it should or should not be invoked
by fill_post_wcc() too. I chose not to change this because I
thought that it was safer to leave well enough alone. If we
decide to make a change, it can be done separately.
Signed-off-by: Peter Staubach <staubach@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Acked-by: Neil Brown <neilb@suse.de>
