The variable r is being initialized with a value that is never
read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes standard netdev stats in ethtool -S.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Xue Chaojing <xuechaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We support many speeds and it doesn't make much sense to list them all
in the Kconfig. Let's just call it Multi-Gigabit.
Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Catherine Sullivan says:
====================
Add gve driver
This patch series adds the gve driver which will support the
Compute Engine Virtual NIC that will be available in the future.
v2:
- Patch 1:
- Remove gve_size_assert.h and use static_assert instead.
- Loop forever instead of bugging if the device won't reset
- Use module_pci_driver
- Patch 2:
- Use be16_to_cpu in the RX Seq No define
- Remove unneeded ndo_change_mtu
- Patch 3:
- No Changes
- Patch 4:
- Instead of checking netif_carrier_ok in ethtool stats, just make sure
v3:
- Patch 1:
- Remove X86 dep
- Patch 2:
- No changes
- Patch 3:
- No changes
- Patch 4:
- Remove unneeded memsets in ethtool stats
v4:
- Patch 1:
- Use io[read|write]32be instead of [read|write]l(cpu_to_be32())
- Explicitly add padding to gve_adminq_set_driver_parameter
- Use static where appropriate
- Patch 2:
- Use u64_stats_sync
- Explicity add padding to gve_adminq_create_rx_queue
- Fix some enianness typing issues found by kbuild
- Use static where appropriate
- Remove unused variables
- Patch 3:
- Use io[read|write]32be instead of [read|write]l(cpu_to_be32())
- Patch 4:
- Use u64_stats_sync
- Use static where appropriate
Warnings reported by:
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the following ethtool commands:
ethtool -s|--change devname [msglvl N] [msglevel type on|off]
ethtool -S|--statistics devname
ethtool -i|--driver devname
ethtool -l|--show-channels devname
ethtool -L|--set-channels devname
ethtool -g|--show-ring devname
ethtool --reset devname
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: Sagi Shahar <sagis@google.com>
Signed-off-by: Jon Olson <jonolson@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the workqueue to handle management interrupts and
support for resets.
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: Sagi Shahar <sagis@google.com>
Signed-off-by: Jon Olson <jonolson@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for passing traffic.
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: Sagi Shahar <sagis@google.com>
Signed-off-by: Jon Olson <jonolson@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a driver framework for the Compute Engine Virtual NIC that will be
available in the future.
At this point the only functionality is loading the driver.
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: Sagi Shahar <sagis@google.com>
Signed-off-by: Jon Olson <jonolson@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mahesh Bandewar says:
====================
blackhole device to invalidate dst
When we invalidate dst or mark it "dead", we assign 'lo' to
dst->dev. First of all this assignment is racy and more over,
it has MTU implications.
The standard dev MTU is 1500 while the Loopback MTU is 64k. TCP
code when dereferencing the dst don't check if the dst is valid
or not. TCP when dereferencing a dead-dst while negotiating a
new connection, may use dst device which is 'lo' instead of
using the correct device. Consider the following scenario:
A SYN arrives on an interface and tcp-layer while processing
SYNACK finds a dst and associates it with SYNACK skb. Now before
skb gets passed to L3 for processing, if that dst gets "dead"
(because of the virtual device getting disappeared & then reappeared),
the 'lo' gets assigned to that dst (lo MTU = 64k). Let's assume
the SYN has ADV_MSS set as 9k while the output device through
which this SYNACK is going to go out has standard MTU of 1500.
The MTU check during the route check passes since MIN(9K, 64K)
is 9k and TCP successfully negotiates 9k MSS. The subsequent
data packet; bigger in size gets passed to the device and it
won't be marked as GSO since the assumed MTU of the device is
9k.
This either crashes the NIC and we have seen fixes that went
into drivers to handle this scenario. 8914a59511 ('bnx2x:
disable GSO where gso_size is too big for hardware') and
2b16f04872 ('net: create skb_gso_validate_mac_len()') and
with those fixes TCP eventually recovers but not before
few dropped segments.
Well, I'm not a TCP expert and though we have experienced
these corner cases in our environment, I could not reproduce
this case reliably in my test setup to try this fix myself.
However, Michael Chan <michael.chan@broadcom.com> had a setup
where these fixes helped him mitigate the issue and not cause
the crash.
The idea here is to not alter the data-path with additional
locks or smb()/rmb() barriers to avoid racy assignments but
to create a new device that has really low MTU that has
.ndo_start_xmit essentially a kfree_skb(). Make use of this
device instead of 'lo' when marking the dst dead.
First patch implements the blackhole device and second
patch uses it in IPv4 and IPv6 stack while the third patch
is the self test that ensures the sanity of this device.
v1->v2
fixed the self-test patch to handle the conflict
v2 -> v3
fixed Kconfig text/string.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since this is not really a device with all capabilities, this test
ensures that it has *enough* to make it through the data path
without causing unwanted side-effects (read crash!).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use blackhole_netdev instead of 'lo' device with lower MTU when marking
dst "dead".
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Tested-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create a blackhole net device that can be used for "dead"
dst entries instead of loopback device. This blackhole device differs
from loopback in few aspects: (a) It's not per-ns. (b) MTU on this
device is ETH_MIN_MTU (c) The xmit function is essentially kfree_skb().
and (d) since it's not registered it won't have ifindex.
Lower MTU effectively make the device not pass the MTU check during
the route check when a dst associated with the skb is dead.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unneeded memset as alloc_etherdev is using kvzalloc which uses
__GFP_ZERO flag
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilias Apalodimas says:
====================
net: netsec: Add XDP Support
This is a respin of https://www.spinics.net/lists/netdev/msg526066.html
Since page_pool API fixes are merged into net-next we can now safely use
it's DMA mapping capabilities.
First patch changes the buffer allocation from napi/netdev_alloc_frag()
to page_pool API. Although this will lead to slightly reduced performance
(on raw packet drops only) we can use the API for XDP buffer recycling.
Another side effect is a slight increase in memory usage, due to using a
single page per packet.
The second patch adds XDP support on the driver.
There's a bunch of interesting options that come up due to the single
Tx queue.
Locking is needed(to avoid messing up the Tx queues since ndo_xdp_xmit
and the normal stack can co-exist). We also need to track down the
'buffer type' for TX and properly free or recycle the packet depending
on it's nature.
Changes since RFC:
- Bug fixes from Jesper and Maciej
- Added page pool API to retrieve the DMA direction
Changes since v1:
- Use page_pool_free correctly if xdp_rxq_info_reg() failed
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The interface only supports 1 Tx queue so locking is introduced on
the Tx queue if XDP is enabled to make sure .ndo_start_xmit and
.ndo_xdp_xmit won't corrupt Tx ring
- Performance (SMMU off)
Benchmark XDP_SKB XDP_DRV
xdp1 291kpps 344kpps
rxdrop 282kpps 342kpps
- Performance (SMMU on)
Benchmark XDP_SKB XDP_DRV
xdp1 167kpps 324kpps
rxdrop 164kpps 323kpps
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the dma direction is stored in page pool params, offer an API
helper for driver that choose not to keep track of it locally
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use page_pool and it's DMA mapping capabilities for Rx buffers instead
of netdev/napi_alloc_frag()
Although this will result in a slight performance penalty on small sized
packets (~10%) the use of the API will allow to easily add XDP support.
The penalty won't be visible in network testing i.e ipef/netperf etc, it
only happens during raw packet drops.
Furthermore we intend to add recycling capabilities on the API
in the future. Once the recycling is added the performance penalty will
go away.
The only 'real' penalty is the slightly increased memory usage, since we
now allocate a page per packet instead of the amount of bytes we need +
skb metadata (difference is roughly 2kb per packet).
With a minimum of 4BG of RAM on the only SoC that has this NIC the
extra memory usage is negligible (a bit more on 64K pages)
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Mashak says:
====================
Fix batched event generation for mirred action
When adding or deleting a batch of entries, the kernel sends upto
TCA_ACT_MAX_PRIO entries in an event to user space. However it does not
consider that the action sizes may vary and require different skb sizes.
For example :
% cat tc-batch.sh
TC="sudo /mnt/iproute2.git/tc/tc"
$TC actions flush action mirred
for i in `seq 1 $1`;
do
cmd="action mirred egress redirect dev lo index $i "
args=$args$cmd
done
$TC actions add $args
%
% ./tc-batch.sh 32
Error: Failed to fill netlink attributes while adding TC action.
We have an error talking to the kernel
%
patch 1 adds callback in tc_action_ops of mirred action, which calculates
the action size, and passes size to tcf_add_notify()/tcf_del_notify().
patch 2 updates the TDC test suite with relevant test cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add get_fill_size() routine used to calculate the action size
when building a batch of events.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
People are inclined to stuff random things into cb->args[n] because it
looks like an array of integers. Sometimes people even put u64s in there
with comments noting that a certain member takes up two slots. The
horror! Really this should mirror the usage of skb->cb, which are just
48 opaque bytes suitable for casting a struct. Then people can create
their usual casting macros for accessing strongly typed members of a
struct.
As a plus, this also gives us the same amount of space on 32bit and 64bit.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The macro TIPC_BC_RETR_LIM is always used in combination with 'jiffies',
so we can just as well perform the addition in the macro itself. This
way, we get a few shorter code lines and one less line break.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
/proc/sys/net/ipv6/flowlabel_reflect assumes written value to be in the
range of 0 to 3. Use proc_dointvec_minmax instead of proc_dointvec.
Fixes: 323a53c412 ("ipv6: tcp: enable flowlabel reflection in some RST packets")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When user has configured a large number of virtual netdev, such
as 4K vlans, the carrier on/off operation of the real netdev
will also cause it's virtual netdev's link state to be processed
in linkwatch. Currently, the processing is done in a work queue,
which may cause rtnl locking starvation problem and worker
starvation problem for other work queue, such as irqfd_inject wq.
This patch releases the cpu when link watch worker has processed
a fixed number of netdev' link watch event, and schedule the
work queue again when there is still link watch event remaining.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: PTP timestamping support
This is the second patchset adding PTP support in mlxsw. Next patchset
will add PTP shapers which are required to maintain accuracy under rates
lower than 40Gb/s, while subsequent patchsets will add tracepoints and
selftests.
Petr says:
This patch set introduces support for retrieving and processing hardware
timestamps for PTP packets.
The way PTP timestamping works on Spectrum-1 is that there are two queues
associated with each front panel port. When a packet is timestamped, the
timestamp is put to one of the queues: timestamps for transmitted packets
to one and for received packets to the other. Activity on these queues is
signaled through the events PTP_ING_FIFO and PTP_EGR_FIFO.
Packets themselves arrive through two traps: PTP0 and PTP1. It is possible
to configure which PTP messages should be trapped under which PTP trap. On
Spectrum systems, mlxsw will use PTP0 for event messages (which need
timestamping), and PTP1 for general messages (which do not).
There are therefore four relevant traps: receive of PTP event resp. general
message, and receive of timestamp for a transmitted resp. received PTP
packet. The obvious point where to put the new logic is a custom listener
to the mentioned traps.
Besides handling ingress traffic (be in packets or timestamps), the driver
also needs to handle timestamping of transmitted packets. One option would
be to invoke the relevant logic from mlxsw_core_ptp_transmitted(). However
on Spectrum-2, the timestamps are actually delivered through the completion
queue, and for that reason this patchset opts to invoke the logic from the
PCI code, via core and the driver, to a chip-specific operation. That way
the invocation will be done in a place where a Spectrum-2 implementation
will have an opportunity to extract the timestamp.
As indicated above, the PTP FIFO signaling happens independently from
packet delivery. A packet corresponding to any given timestamp could be
delivered sooner or later than the timestamp itself. Additionally, the
queues are only four elements deep, and it is therefore possible that the
timestamp for a delivered packet never arrives at all. Similarly a PTP
packet might be dropped due to CPU traffic pressure, and never be delivered
even if the corresponding timestamp was.
The driver thus needs to hold a cache of as-yet-unmatched SKBs and
timestamps. The first piece to arrive (be it timestamp or SKB) is put to
this cache. When the other piece arrives, the timestamp is attached to the
SKB and that is passed on. A delayed work is run at regular intervals to
prune the old unmatched entries.
As mentioned above, the mechanism for timestamp delivery changes on
Spectrum-2, where timestamps are part of completion queue elements, and all
packets are timestamped. All this bookkeeping is therefore unnecessary on
Spectrum-2. For this reason, this patchset spends some time introducing
Spectrum-1 specific artifacts such as a possibility to register a given
trap only on Spectrum-1.
Patches #1-#4 describe new registers.
Patches #5 and #6 introduce the possibility to register certain traps
only on some systems. The list of Spectrum-1 specific traps is left empty
at this point.
Patch #7 hooks into packet receive path by registering PTP traps
and appropriate handlers (that however do nothing of substance yet).
Patch #8 adds a helper to allow storing custom data to SKB->cb.
Patch #9 adds a call into the PCI completion queue handler that invokes,
via core and spectrum code, a PTP transmit handler. (Which also does not do
anything interesting yet.)
Patch #10 introduces code to invoke PTP initialization and adds data types
for the cache of unmatched entries.
Patches #11 and #12 implement the timestamping itself. In #11, the PHC
spin_locks are converted to _bh variants, because unlike normal PHC path,
which runs in process context, timestamp processing runs as soft interrupt.
Then #12 introduces the code for saving and retrieval of unmatched entries,
invokes PTP classifier to identify packets of interest, registers timestamp
FIFO events, and handles decoding and attaching timestamps to packets.
Patch #13 introduces a garbage collector for left-behind entries that have
not been matched for about a second.
In patch #14, PTP message types are configured to arrive as PTP0
(events) or PTP1 (everything else) as appropriate. At this point, the PTP
packets start arriving through the traps, but because PTP is disabled and
there is no way to enable it yet, they are always just passed to the usual
receive path right away.
Finally patches #15 and #16 add the plumbing to actually make it possible
to enable this code through SIOCSHWTSTAMP ioctl, and to advertise the
hardware timestamping capabilities through ethtool.
v2:
- Patch #12:
- In mlxsw_sp1_ptp_fifo_event_func(), post-increment when iterating over PTP
FIFO records.
- Patch #14:
- Change namespace of message type enumerators from MLXSW_ to MLXSW_SP_.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The get_ts_info callback is used for obtaining information about
timestamping capabilities of a network device. On Spectrum-1, implement
it to advertise the PHC and the capability to do HW timestamping, and
the supported RX and TX filters.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SIOCSHWTSTAMP ioctl configures HW timestamping on a given port.
Dispatch the ioctls to per-chip handler (which add to ptp_ops). Find
which PTP messages need to be timestamped and configure MTPPPC
accordingly.
The SIOCGHWTSTAMP ioctl is getter for the current configuration.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Configure MTPTPT to set which message types should arrive under which
PTP trap, and MOGCR to clear the timestamp queue after its contents are
reported through PTP_ING_FIFO or PTP_EGR_FIFO.
With this configuration, PTP packets start arriving through the PTP
traps. However since timestamping is disabled by default and there is
currently no way to enable it, they will not be timestamped.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On Spectrum-1, timestamped PTP packets and the corresponding timestamps
need to be kept in caches until both are available, at which point they are
matched up and packets forwarded as appropriate. However, not all packets
will ever see their timestamp, and not all timestamps will ever see their
packet. It is therefore necessary to dispose of such abandoned entries.
To that end, introduce a garbage collector to collect entries that have
not had their counterpart turn up within about a second. The GC
maintains a monotonously-increasing value of GC cycle. Every entry that
is put to the hash table is annotated with the GC cycle at which it
should be collected. When the GC runs, it walks the hash table, and
collects the objects according to their GC cycle annotation.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On Spectrum-1, timestamps arrive through a pair of dedicated events:
MLXSW_TRAP_ID_PTP_ING_FIFO and _EGR_FIFO. The payload delivered with
those traps is contents of the timestamp FIFO at a given port in a given
direction. Add a Spectrum-1-specific handler for these two events which
decodes the timestamps and forwards them to the PTP module.
Add a function that parses a packet, dispatching to ptp_classify_raw(),
and decodes PTP message type, domain number, and sequence ID. Add a new
mlxsw dependency on the PTP classifier.
Add helpers that can store and retrieve unmatched timestamps and SKBs to
the hash table added in a preceding patch.
Add the matching code itself: upon arrival of a timestamp or a packet,
look up the corresponding unmatched entry, and match it up. If there is
none, add a new unmatched entry. This logic is the same on ingress as on
egress.
Packets and timestamps that never matched need to be eventually disposed
of. A garbage collector added in a follow-up patch will take care of
that. Since currently all this code is turned off, no crud will
accumulate in the hash table.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Up until now, the PTP hardware clock code was only invoked in the process
context (SYS_clock_adjtime -> do_clock_adjtime -> k_clock::clock_adj ->
pc_clock_adjtime -> posix_clock_operations::clock_adjtime ->
ptp_clock_info::adjtime -> mlxsw_spectrum).
In order to enable HW timestamping, which is tied into trap handling, it
will be necessary to take the clock lock from the PCI queue handler
tasklets as well.
Therefore use the _bh variants when handling the clock lock. Incidentally,
Documentation/ptp/ptp.txt recommends _irqsave variants, but that's
unnecessarily strong for our needs.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two ptp_ops: init and fini, to initialize and finalize the PTP
subsystem. Call as appropriate from mlxsw_sp_init() and _fini().
Lay the groundwork for Spectrum-1 support. On Spectrum-1, the received
timestamped packets and their corresponding timestamps arrive
independently, and need to be matched up. Introduce the related data types
and add to struct mlxsw_sp_ptp_state the hash table that will keep the
unmatched entries.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On Spectrum-1, timestamps are delivered separately from the packets, and
need to paired up. Therefore, at some point after mlxsw_sp_port_xmit()
is invoked, it is necessary to involve the chip-specific driver code to
allow it to do the necessary bookkeeping and matching.
On Spectrum-2, timestamps are delivered in CQE. For that reason,
position the point of driver involvement into mlxsw_pci_cqe_sdq_handle()
to make it hopefully easier to extend for Spectrum-2 in the future.
To tell the driver what port the packet was sent on, keep tx_info
in SKB control buffer.
Introduce a new driver core interface mlxsw_core_ptp_transmitted(), a
driver callback ptp_transmitted, and a PTP op transmitted. The callee is
responsible for taking care of releasing the SKB passed to the new
interfaces, and correspondingly have the new stub callbacks just call
dev_kfree_skb_any().
Follow-up patches will introduce the actual content into
mlxsw_sp1_ptp_transmitted() in particular.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SKB control buffer is useful (and used) for bookkeeping of information
related to that SKB. Add helpers so that the mlxsw driver(s) can safely use
the buffer as well. The structure is currently empty, individual users will
add members to it as necessary.
Note that SKB allocation functions already clear the buffer, so the cleanup
is only necessary when ndo_start_xmit is called.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When configured, the Spectrum hardware can recognize PTP packets and
trap them to the CPU using dedicated traps, PTP0 and PTP1.
One reason to get PTP packets under dedicated traps is to have a
separate policer suitable for the amount of PTP traffic expected when
switch is operated as a boundary clock. For this, add two new trap
groups, MLXSW_REG_HTGT_TRAP_GROUP_SP_PTP0 and _PTP1, and associate the
two PTP traps with these two groups.
In the driver, specifically for Spectrum-1, event PTP packets will need
to be paired up with their timestamps. Those arrive through a different
set of traps, added later in the patch set. To support this future use,
introduce a new PTP op, ptp_receive.
It is possible to configure which PTP messages should be trapped under
which PTP trap. On Spectrum systems, we will use PTP0 for event
packets (which need timestamping), and PTP1 for control packets (which
do not). Thus configure PTP0 trap with a custom callback that defers to
the ptp_receive op.
Additionally, L2 PTP packets are actually trapped through the LLDP trap,
not through any of the PTP traps. So treat the LLDP trap the same way as
the PTP0 trap. Unlike PTP traps, which are currently still disabled,
LLDP trap is active. Correspondingly, have all the implementations of
the ptp_receive op return true, which the handler treats as a signal to
forward the packet immediately.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On Spectrum-1, timestamps for PTP packets are delivered through queues
of ingress and egress timestamps. There are two event traps
corresponding to activity on each of those queues. This mechanism is
absent on Spectrum-2, and therefore the traps should only be registered
on Spectrum-1.
Carry a chip-specific listener array in mlxsw_sp->listeners and
listeners_count. Register listeners from that array in
mlxsw_sp_traps_init(). Add a new listener array for Spectrum-1 traps and
configure the newly-added mlxsw_sp->listeners with this array.
The listener array is empty for now, the events will be added in a later
patch.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On Spectrum-1, timestamps for PTP packets are delivered through queues
of ingress and egress timestamps. There are two event traps
corresponding to activity on each of those queues. This mechanism is
absent on Spectrum-2, and therefore the traps should only be registered
on Spectrum-1.
Extract out of mlxsw_sp_traps_init() a generic helper,
mlxsw_sp_traps_register(), and likewise with _unregister(). The new helpers
will later be called with Spectrum-1-specific traps.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This register serves to configure global parameters of certain
monitoring operations. The following patches will use it to configure
that when PTP timestamps are delivered through the PTP FIFO traps, the
FIFO in question is cleared as well.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MTPPTR is used for reading the per port PTP timestamp FIFO.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This register is used for configuring under which trap to deliver PTP
packets depending on type of the packet.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This register serves for configuration of which PTP messages should be
timestamped. This is a global configuration, despite the register name.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, kernel pktgen has the feature to specify udp destination port
for sending packet. (e.g. pgset "udp_dst_min 9")
But on samples, each of the scripts doesn't have any option to achieve this.
This commit adds the DST_PORT option to specify the target port(s) in the script.
-p : ($DST_PORT) destination PORT range (e.g. 433-444) is also allowed
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds port parsing and port validate helper function to parse
single or range of port(s) from a given string. (e.g. 1234, 443-444)
Helpers will be used in prior to set target port(s) in samples/pktgen.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend flowlabel_reflect bitmask to allow conditional
reflection of incoming flowlabels in echo replies.
Note this has precedence against auto flowlabels.
Add flowlabel_reflect enum to replace hard coded
values.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This series adds some misc updates for mlx5e driver
1) Allow adding the same mac more than once in MPFS table
2) Move to HW checksumming advertising
3) Report netdevice MPLS features
4) Correct physical port name of the PF representor
5) Reduce stack usage in mlx5_eswitch_termtbl_create
6) Refresh TIR improvement for representors
7) Expose same physical switch_id for all representors
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl0WnOAACgkQSD+KveBX
+j6xQwgAuarc5NCi8jg9m+yXFXj/kr1cPwZ6Pxadi8hAd3NbEMGtutdFZIXsIXZZ
y0uYxzkrCqXUUh2ZnpE09YlBISLyVSt3WGdqgJn1wel//O33gS6GpYXwVGOfgL7n
+d9FCYvrun6v6aOHM5ZGxQ+qxHzupz5k4F0r7fz2Gsd+JEgL58nwc8ERSbOTbZMO
TLO1pcxlXWwGSqd5uc4AHi8hZTvuzWl/Fm5hOTP9gx/Sl3UaYWa3WiTgj5uOD5Zt
956Xqk0LLwSaiKVAsFjIa7HHWOaDLnVmbmTUzhv82hharqmvPW1CIWlx1gv01KoP
wMWoyyoy7cTyyrWNozWEed/14LyEVA==
=S4bJ
-----END PGP SIGNATURE-----
Merge tag 'mlx5e-updates-2019-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5e-updates-2019-06-28
This series adds some misc updates for mlx5e driver
1) Allow adding the same mac more than once in MPFS table
2) Move to HW checksumming advertising
3) Report netdevice MPLS features
4) Correct physical port name of the PF representor
5) Reduce stack usage in mlx5_eswitch_termtbl_create
6) Refresh TIR improvement for representors
7) Expose same physical switch_id for all representors
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2019-06-28
This series contains a smorgasbord of updates to many of the Intel
drivers.
Gustavo A. R. Silva updates the ice and iavf drivers to use the
strcut_size() helper where possible.
Miguel increases the pause and refresh time for flow control in the
e1000e driver during reset for certain devices.
Dann Frazier fixes a potential NULL pointer dereference in ixgbe driver
when using non-IPSec enabled devices.
Colin Ian King fixes a potential overflow during a shift in the ixgbe
driver. Also fixes a potential NULL pointer dereference in the iavf
driver by adding a check.
Venkatesh Srinivas converts the e1000 driver to use dma_wmb() instead of
wmb() for doorbell writes to avoid SFENCEs in the transmit and receive
paths.
Arjan updates the e1000e driver to improve boot time by over 100 msec by
reducing the usleep ranges suring system startup.
Artem updates the igb driver register dump in ethtool, first prepares
the register dump for future additions of registers in the dump, then
secondly, adds the RR2DCDELAY register to the dump. When dealing with
time-sensitive networks, this register is helpful in determining your
latency from the device to the ring.
Alex fixes the ixgbevf driver to use the current cached link state,
rather than trying to re-check the value from the PF.
Harshitha adds support for MACVLAN offloads in i40e by using channels as
MACVLAN interfaces.
Detlev Casanova updates the e1000e driver to use delayed work instead of
timers to run the watchdog.
Vitaly fixes an issue in e1000e, where when disconnecting and
reconnecting the physical cable connection, the NIC enters a DMoff
state. This state causes a mismatch in link and duplexing, so check the
PCIm function state and perform a PHY reset when in this state to
resolve the issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DMA_API_HOWTO.txt includes an example explaining when
dma_sync_single_for_device() is not needed, and that example matches
our use case. The buffer isn't changed by the CPU and direction is
DMA_FROM_DEVICE, so we can remove the call to
dma_sync_single_for_device().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Documentation/DMA-API-HOWTO.txt states:
By default, the kernel assumes that your device can address 32-bits of
DMA addressing. For a 64-bit capable device, this needs to be increased,
and for a device with limitations, it needs to be decreased.
Therefore we don't need the 32 Bit DMA fallback configuration and can
remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The VLAN tag is stored in the descriptor in network byte order.
Using swab16 works on little endian host systems only. Better play safe
and use ntohs or htons respectively.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King