The Inventec Lanyang is Power 9 platform with ast2500 BMC.
Signed-off-by: Brian Yang <yang.brianc.w@inventec.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Initial introduction of Portwell Neptune family equipped with
Aspeed 2500 BMC SoC. Neptune is a x86 server development kit with a
ASPEED ast2500 BMC manufactured by Portwell. Specifically, This
adds the neptune platform device tree file including the flash
layout used by the neptune machines.
Signed-off-by: Amithash Prasad <amithash@fb.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Here is our usual bunch of changes to the common DTSI shared between arm
and arm64, and their associated device trees.
Even though the diffstat is quite big, it's been mostly just cleanups. The
big feature is that the HDMI is now suported on H3 and H5 boards.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE0VqZU19dR2zEVaqr0rTAlCFNr3QFAlqzy3UACgkQ0rTAlCFN
r3RGXA/9GeVE6R7XQGJX5240cqfLg2HNDBMU5RmRege++kY8wzaoJvnyh2CbQXX5
GJMOs3IEQuXfss7zX7uH9ZCm/b6ibves76gJE140+ZkX4N9DvZdJFaT0K83gYVAL
6Zjt8fo7TAJXuF6SqLkTmG5W4Gs9vQ/n1ui8iM9zptphvm++W/knCht42wiZprHv
+Z7HI5ITw/JGR2gGLD/MPkuCBy1VUmmg4LciVRTbrZ1aNNYirXosGep+TM91dwvh
Dhg3K4fRass47woiyHk+CXhhqgM7xGrShKpX1DGzaQmzUhwQyUiFW0VLyPiWGuy+
QrqCeA1X4XNwCH0v2JxxLQO3Wxu1hV9ZTYdruQM6vJ2QZSwURqr6KNzstAXc9H1b
akcdbjGw25EJpP1s1rAqCJDdiFv1wo3q7nZELK3G6E89uurRn2bjbpIvFduL43Gs
pYaZULcBvPRE7j4JZBrqdQg2EqAzGKLTkO574IiP97EQIUV9GfupHMJt8an38Jtg
AWBYGGIa8UKRWRroAxJOTx7s4sVzNhxzWwNxUfzGd0PZ+/jtJZ8klbrZ62ZIKHgv
yNYXXdQ56QC2JClB9fU+8Qe//ZCn94JyXXH7Ms4hf1cPaKQC6o1KOdVAHhiiwMwZ
SW8ixLZ/1bgvyvHvv73MEkGOtinmLMqFATBzj4qd0oIfzH3oCU8=
=hXvM
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Pull "Allwinner H3/H5 changes for 4.17" from Maxime Ripard:
Here is our usual bunch of changes to the common DTSI shared between arm
and arm64, and their associated device trees.
Even though the diffstat is quite big, it's been mostly just cleanups. The
big feature is that the HDMI is now suported on H3 and H5 boards.
* tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: H5: Add Xunlong Orange Pi Zero Plus
ARM: dts: sun8i-h3: Add Mali node
ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards
ARM: dts: sun8i: h3: Enable HDMI output on H3 boards
ARM: dts: sunxi: h3/h5: Add HDMI pipeline
ARM: dts: sun8i: h2-plus: remove unnecessary mmc1_pins node
ARM: dts: sunxi: h3-h5: rename mmc0_pins_a and mmc1_pins_a
ARM: dts: sunxi: h3-h5: Move pinctrl of mmc1 from dts to dtsi
ARM: dts: sunxi: h3-h5: Move pinctrl of mmc0 from dts to dtsi
ARM: dts: sunxi: h3-h5: remove mmc0 card detection pin from pinctrl
ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board
ARM: dts: sunxi: Switch MMC nodes away from cd-inverted property
ARM: dts: nanopi-neo-air: Add WiFi / eMMC
There is a bunch of significant additions for this release cycle:
- The A83t now has HDMI support
- The A80 finally has SMP support (without PSCI, unfortunately)
- The A80 has preliminary display support
And also:
- a number of boards based on old (A10, A20) SoCs now have the HDMI
support enabled.
- The display frontend is enabled on the A33, allowing to use it for
hardware display scaling
- New boards: Olimex A20-SOM204 variants
-----BEGIN PGP SIGNATURE-----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=S3LW
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Pull "Allwinner DT changes for 4.17" from Maxime Ripard:
There is a bunch of significant additions for this release cycle:
- The A83t now has HDMI support
- The A80 finally has SMP support (without PSCI, unfortunately)
- The A80 has preliminary display support
And also:
- a number of boards based on old (A10, A20) SoCs now have the HDMI
support enabled.
- The display frontend is enabled on the A33, allowing to use it for
hardware display scaling
- New boards: Olimex A20-SOM204 variants
* tag 'sunxi-dt-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (39 commits)
ARM: dts: sun9i: cubieboard4: Enable VGA display output
ARM: dts: sun9i: Add pinmux settings for LCD0 RGB888 output.
ARM: dts: sun9i: Add device nodes for documented display pipelines for A80
ARM: dts: sun8i: reference tablet design: Enable PMIC power supplies
ARM: dts: sun8i: a33: Enable A33 internal audio codec on A33-OLinuXino
ARM: dts: sun8i: a33: Enable PMIC power supplies on A33-OLinuXino
ARM: dts: sun8i: a33: Drop sunxi-common-regulators.dtsi for A33-OLinuXino
ARM: dts: sun8i: a33: Drop GPIO pinmux settings for A33-OLinuXino
ARM: dts: sun9i: Add enable-method for SMP support for the A80 SoC
ARM: dts: sun8i: h3: Add eMMC for NanoPi M1 Plus
ARM: dts: sun8i: a711: set regulator for each cluster of CPUs
ARM: dts: sun8i: a83t: add stable OPP tables and CPUfreq
ARM: dts: sun8i: a83t: add cpu0 and cpu100 labels
ARM: dtsi: axp81x: remove IP name from DT node name
ARM: dtsi: sun8i: a711: enable battery power supply subnode
ARM: dtsi: axp81x: add battery power supply subnode
ARM: dtsi: axp81x: add node for ADC
ARM: dtsi: axp22x: add node for ADC
ARM: dtsi: axp209: add node for ADC
ARM: dts: sun7i: Enable HDMI support on the Orange Pi mini
...
define the VGA and panel connectors in preparation for DRM.
-----BEGIN PGP SIGNATURE-----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=0XCD
-----END PGP SIGNATURE-----
Merge tag 'armsoc-versatile-drm-dts' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt
Pull "DTS changes for RealView+Versatile" from Linus Walleij:
This augments the RealView and Versatile device trees to properly
define the VGA and panel connectors in preparation for DRM.
* tag 'armsoc-versatile-drm-dts' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: Augment panel setting for Versatile
ARM: dts: Add Versatile IB2 device tree
ARM: dts: Augment VGA connector bridge on Realview PBX
ARM: dts: Augment VGA connector bridge on Realview EB
ARM: dts: Augment VGA connector bridge on PB1176
ARM: dts: Augment VGA connector bridge on PB11MPcore
* Silk board with R-Car E2 (r8a7794) SoC
- Add r1ex24002 EEPROM to DT
Magnus Damm says "Extend the Silk board support to include U14 which is
an I2C based EEPROM hooked up to the I2C1 bus."
- Add GPIO keys to DT
Magnus Damm says "Extend the Silk board support to include SW3, SW4,
SW6 and SW12. They are all connected via GPIO lines and handled by the
gpio-keys driver"
* Marzen board with R-Car H1 (r7a7779) SoC
- Add SDHI0 VCCQ Regulator
Magnus Damm says "Add support for the on-board voltage regulator hooked
up to GPIO3_20 on r8a7779 Marzen. The board schematics describes the
regulator as U4 TPS2110A. Input wise, U4 has D0 fixed to ground, D1
tied to GPIO3_20 while IN1 is fixed to 3.3V and IN2 is fixed to 1.8V.
OUT goes to the pull-ups for the data pins of SDHI0."
* Porter board with R-Car M3W (r8a7791) SoC
- Fix HDMI output routing
Laurent Pinchart says "The HDMI encoder is connected to the RGB output
of the DU, which is port@0, not port@1."
* iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) and
iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
- Enable cmt0
* Stout board with R-Car H2 (r8a7790) SoC
- Initial support
* Lager board with R-Car H2 (r8a7790) SoC
- Add CEC clock for HDMI transmitter
Niklas Söderlund says "The adv7511 on the Lager board has a 12 MHz
fixed clock for the CEC block. Specify this in the dts to enable CEC
support."
- Move cec_clock to root node
By definition nodes without a bus address do not belong on the bus
* kzm9d board with EMMA Mobile EV2 (EMEV2) SoC
- Fix "debounce-interval" property misspelling
* RZ/G1M (r8a7743) and RZ/G1H (r8a7745) SoCs
- Add IPMMU DT nodes
- Add VSP support
* R-Car Gen2 boards
- Use I2C demuxer for
This allows run-time switching between alternate I2C IP blocks
* R-Car Gen2 and RZ/G1 SoCs
- Clean up DT files to ease future maintenance
+ add soc node for IP attached to the bus
+ sort subnodes of soc and root node
+ consistently use single space after =
* R-Car H2 (r8a7790), M3-W (r8a7791) and M3-N (r7a7793) SoCs
- Reduce size of thermal registers
According to the "User's Manual: Hardware" v2.00 the registers at base
0xe61f0000 extend to an offset of 0x10, rather than 0x14 which is the
case on the r8a73a4 (R-Mobile APE6).
This should not have any runtime affect as mapping granularity is
PAGE_SIZE.
-----BEGIN PGP SIGNATURE-----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=dZnw
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Renesas ARM Based SoC DT Updates for v4.17" from Simon Horman:
* Silk board with R-Car E2 (r8a7794) SoC
- Add r1ex24002 EEPROM to DT
Magnus Damm says "Extend the Silk board support to include U14 which is
an I2C based EEPROM hooked up to the I2C1 bus."
- Add GPIO keys to DT
Magnus Damm says "Extend the Silk board support to include SW3, SW4,
SW6 and SW12. They are all connected via GPIO lines and handled by the
gpio-keys driver"
* Marzen board with R-Car H1 (r7a7779) SoC
- Add SDHI0 VCCQ Regulator
Magnus Damm says "Add support for the on-board voltage regulator hooked
up to GPIO3_20 on r8a7779 Marzen. The board schematics describes the
regulator as U4 TPS2110A. Input wise, U4 has D0 fixed to ground, D1
tied to GPIO3_20 while IN1 is fixed to 3.3V and IN2 is fixed to 1.8V.
OUT goes to the pull-ups for the data pins of SDHI0."
* Porter board with R-Car M3W (r8a7791) SoC
- Fix HDMI output routing
Laurent Pinchart says "The HDMI encoder is connected to the RGB output
of the DU, which is port@0, not port@1."
* iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) and
iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
- Enable cmt0
* Stout board with R-Car H2 (r8a7790) SoC
- Initial support
* Lager board with R-Car H2 (r8a7790) SoC
- Add CEC clock for HDMI transmitter
Niklas Söderlund says "The adv7511 on the Lager board has a 12 MHz
fixed clock for the CEC block. Specify this in the dts to enable CEC
support."
- Move cec_clock to root node
By definition nodes without a bus address do not belong on the bus
* kzm9d board with EMMA Mobile EV2 (EMEV2) SoC
- Fix "debounce-interval" property misspelling
* RZ/G1M (r8a7743) and RZ/G1H (r8a7745) SoCs
- Add IPMMU DT nodes
- Add VSP support
* R-Car Gen2 boards
- Use I2C demuxer for
This allows run-time switching between alternate I2C IP blocks
* R-Car Gen2 and RZ/G1 SoCs
- Clean up DT files to ease future maintenance
+ add soc node for IP attached to the bus
+ sort subnodes of soc and root node
+ consistently use single space after =
* R-Car H2 (r8a7790), M3-W (r8a7791) and M3-N (r7a7793) SoCs
- Reduce size of thermal registers
According to the "User's Manual: Hardware" v2.00 the registers at base
0xe61f0000 extend to an offset of 0x10, rather than 0x14 which is the
case on the r8a73a4 (R-Mobile APE6).
This should not have any runtime affect as mapping granularity is
PAGE_SIZE.
* tag 'renesas-dt-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (47 commits)
ARM: dts: silk: Add GPIO keys to DT
ARM: dts: silk: Add r1ex24002 EEPROM to DT
ARM: dts: marzen: Add SDHI0 VCCQ Regulator
ARM: dts: stout: Initial r8a7790 Stout board support
ARM: dts: lager: Move cec_clock to root node
ARM: dts: kzm9d: Fix "debounce-interval" property misspelling
ARM: dts: gose: use demuxer for I2C4
ARM: dts: gose: use demuxer for I2C2
ARM: dts: silk: use demuxer for I2C1
ARM: dts: alt: use demuxer for I2C1
ARM: dts: porter: use demuxer for I2C2
ARM: dts: koelsch: use demuxer for I2C4
ARM: dts: koelsch: use demuxer for I2C2
ARM: dts: lager: use demuxer for IIC3/I2C3
ARM: dts: lager: use demuxer for IIC2/I2C2
ARM: dts: r8a7745: Add VSP support
ARM: dts: r8a7743: Add VSP support
ARM: dts: r8a7745: Add IPMMU DT nodes
ARM: dts: r8a7743: Add IPMMU DT nodes
ARM: dts: r8a7745: sort subnodes of soc node
...
Support for the VDE is added on Tegra30 along with some general cleanup
and some improvements to the various Toradex boards.
-----BEGIN PGP SIGNATURE-----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=Dqxp
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.17-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
Pull "ARM: tegra: Device tree changes for v4.17-rc1" from Thierry Reding:
Support for the VDE is added on Tegra30 along with some general cleanup
and some improvements to the various Toradex boards.
* tag 'tegra-for-4.17-arm-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: apalis-tk1: Support v1.2 hardware revision
ARM: tegra: apalis-tk1: Copyright period, spurious newlines
ARM: tegra: apalis-tk1: Hog group for ethernet, PCIe, reset GPIOs
ARM: tegra: apalis-tk1: Add missing as3722 gpio0 configuration
ARM: tegra: apalis-tk1: Activate PWM pin muxing for pwm3
ARM: tegra: apalis-tk1: Set critical trips
ARM: tegra: apalis/colibri: Remove unneeded reg property
ARM: tegra: apalis/colibri: Use correct compatible for RTC
ARM: tegra: Fix I2C bus frequencies on Apalis/Colibri
ARM: tegra: venice2: Remove duplicate pcie-1 node
ARM: tegra: beaver: Remove invalid uses of rsvd1
ARM: tegra: Use proper IRQ type definitions
ARM: tegra: Fix ULPI regression on Tegra20
ARM: tegra: Add unit address to VDE IRAM area
ARM: tegra: Add video decoder node on Tegra30
ARM: tegra: Add IRAM node on Tegra30
The Versatile board can be equipped with a interface board
just named "IB2". This was created in the early 2000s for
prototyping GSM candybar phone form factor products.
The IB2 board contains:
- Cascaded interrupt controller
- Enfora Enabler GSM0308 quad-band module with antenna and
separate audio jack
- Keypad with joystick
- Sanyo 2.5" color display
- A 28-pin connector for mounting a camera
This adds a DTS file for the combination of the Versatile AB
with an IB2 daughterboard mounted, making the LED blink and
making the system controller available for drivers, such as
the panel driver.
The device tree bindings already exist in
Documentation/devicetree/bindings/arm/arm-boards.
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Stout base board support making use of 1 GiB of memory,
the Renesas H2 r8a7790 SoC with the SCIFA0 serial port
and CA15 with ARM architected timer.
Furthermore, this device tree contains entries for:
- 4x LEDs
- SDHI SD/MMC controller
- Display unit with HDMI output
- SH fast ethernet controller
- QSPI controller with S25FL512S attached to it
- I2C controller with DA9210 and DA 9063 PMICs
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Updates to OpenPower BMC systems:
A number of updates to use recently merged drivers, including moving to
upstreamed IPMI BT nodes, a temp sensor for Romulus, and adding
simple-reset for UARTs.
This includes more of Palmetto's device tree, so that it's ever so
close to booting the host with an upstream kernel.
New machines:
Add Qualcomm Centriq ARM64 server reference platform, which will run
OpenBMC on an AST2500.
-----BEGIN PGP SIGNATURE-----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=7HDC
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.17-devicetree' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt
Pull "ASPEED device tree updates for 4.17" from Joel Stanley:
Updates to OpenPower BMC systems:
A number of updates to use recently merged drivers, including moving to
upstreamed IPMI BT nodes, a temp sensor for Romulus, and adding
simple-reset for UARTs.
This includes more of Palmetto's device tree, so that it's ever so
close to booting the host with an upstream kernel.
New machines:
Add Qualcomm Centriq ARM64 server reference platform, which will run
OpenBMC on an AST2500.
* tag 'aspeed-4.17-devicetree' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: Add Qualcomm Centriq 2400 REP BMC
ARM: dts: aspeed: romulus: Add w83773g temp sensor
ARM: dts: aspeed: romulus: hog GPIOS7
ARM: dts: romulus: Remove MAX31785 device
ARM: dts: palmetto: Request mux as per strapping configuration
ARM: dts: palmetto: Enable rear UART
ARM: dts: aspeed: Add LPC reset controller node
ARM: dts: aspeed: Add Palmetto GPIO hogs
ARM: dts: palmetto: Add LEDs and GPIO keys
ARM: dts: aspeed: Add LPC clock phandles
ARM: dts: aspeed-g5: Update LPC node
ARM: dts: aspeed: Enable IPMI BT node on OpenPower machines
ARM: dts: aspeed: Add IPMI BT node
The Qualcomm Centriq 2400 REP (Reference Evaluation Platform) is
an aarch64 Armv8 server platform with an ast2520 BMC.
Signed-off-by: Ken Chen <chen.kenyy@inventec.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This DTS has support for the Samsung Galaxy S5 (codenamed klte).
Initial version have support just for serial console.
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Daniele Debernardi <drebrez@gmail.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Support the V1.2 hardware revision with the following pin muxing
changes:
Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4
are now used as DDC pins.
Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are
now used as USB power enable signals.
Usb_vbus_en0_pn4 and usb_vbus_en1_pn5 previously used as USB power
enable signals are now used as GPIO3 and GPIO4.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This add a DTS for the Digilent Zybo Z7 board.
This board is the successor board of Zybo, these are almost the same except
for ps-clk-frequency specifications.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu@cybertrust.co.jp>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, ethernet, i2c, qspi, spi and uart.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, 2x i2c, nor flash, spi and uart.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, i2c, nand uart, spi and usb.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
The board contains 7z010 with 512MB memory, ethernet, qspi, uart, usbs
and sd. But board is not supporting booting from sd card.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
1. Add WiFi to Artik 5 board.
2. Remove unused samsung_k3pe0e000b memory DTSI.
3. Add few remaining SPDX license identifiers.
4. Refactor Exynos4 by using labels for overriding/extending nodes and
moving respective nodes under the 'soc' node.
5. Add three new Exynos4412-based boards: GT-I9300 (Samsung Galaxy S3),
GT-I9305 (Samsung Galaxy S3 LTE) and GT-N7100/N7105 (Samsung Note 2).
They are based heavily on existing Trats2 board.
6. Fix PMIC interrupts on Trats board.
7. Fix IOMMU for GScaler devices on Exynos5250.
8. Minor fixes in unit addresses pointed by DTC.
9. Minor cleanups from unused properties and duplicated code.
-----BEGIN PGP SIGNATURE-----
iQItBAABCAAXBQJantDuEBxrcnprQGtlcm5lbC5vcmcACgkQwTdm5oaLg9ccGw/9
FO2VrijXXG1H+ZKwMThvax/rbCzs6nt5mFu1pf/goCup/s2VOTQGfKO8q3y4QvZV
ZEozlHO1K/GymYw3Hknew8QZrdf4Cr4qOepcl+Ix0qjIVaVeeGmv2j4mgSzkaFdn
IWGjVqod3l/oCN+FPx9+5PTB5M3cMlOmet99sblohnP+IXXEopkAV3+Lxw7gBSsc
Ucc8g8U1+7eqM9g5MUar4JRHIuFO20x2spuzp+sjCdte3b1hICXhl+MYF+w5gS2G
6VPGqoS1GX/aQVOw9/13n1XZSUdVPL2p18q0qZRywcXNh0H9YE/aLffC7bSvRPz4
K7LMzc1VYoyaRAh5JXPUo0yd2vX8BIemVln/WvwXc0jnUuaNIyRzQB2K/AFzvI2N
GOmouFUqDfLGO/clzM1di4ji81j9RqUqeWjmqCspkaAlUfZeIua+JalLbAJJrYX/
IXBTT8XCYcsxwLpsnY0y0rC1sNxH7ItReBshNqUNbLy9TT/2JT6ICLq88X+nkOlD
qbly/DQ7KIxBfkek94rAoQvlNij0uUmCyTP1oMJEU9Ba8cBJdAEMcqi+zSIegTHY
0nqL7JhpuptEVNTtwlMLM3wlVYnCRDFhBIgMCE6AbIUBsusAqKQIavpmE9hWAa8m
/VwtMh8tqLJSGAyi1C/6XZjNTc9ORkKDtx+ZDo2a+WY=
=WjCX
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Pull "Samsung DTS ARM changes for v4.17" from Krzysztof Kozłowski:
1. Add WiFi to Artik 5 board.
2. Remove unused samsung_k3pe0e000b memory DTSI.
3. Add few remaining SPDX license identifiers.
4. Refactor Exynos4 by using labels for overriding/extending nodes and
moving respective nodes under the 'soc' node.
5. Add three new Exynos4412-based boards: GT-I9300 (Samsung Galaxy S3),
GT-I9305 (Samsung Galaxy S3 LTE) and GT-N7100/N7105 (Samsung Note 2).
They are based heavily on existing Trats2 board.
6. Fix PMIC interrupts on Trats board.
7. Fix IOMMU for GScaler devices on Exynos5250.
8. Minor fixes in unit addresses pointed by DTC.
9. Minor cleanups from unused properties and duplicated code.
* tag 'samsung-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (29 commits)
ARM: dts: exynos: Fix IOMMU support for GScaler devices on Exynos5250
ARM: dts: exynos: Remove unused bypass-smu property from Xyref5260
ARM: dts: exynos: Add missing interrupts property to PMIC on Trats board
ARM: dts: exynos: Fix unit addresses of PDMA nodes in Exynos5410
ARM: dts: exynos: Fix address of PPMU ACP on Exynos4210
ARM: dts: exynos: Cleanup power domain nodes in exynos3250.dtsi
ARM: dts: exynos: Add touchscreen node to Exynos4412 N710x
ARM: dts: exynos: Add Samsung's Exynos4412-based Midas boards
ARM: dts: exynos: Split Trats2 DTS in preparation for Midas boards
ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes
dt-bindings: samsung: Document bindings for Midas family boards
ARM: dts: exynos: Add soc node to exynos4412
ARM: dts: exynos: Add soc node to exynos4210
ARM: dts: exynos: Add soc node to exynos4
ARM: dts: exynos: Add soc node to exynos5440
ARM: dts: exynos: Use pmu label in exynos4412
ARM: dts: exynos: Remove duplicated inclusion of syscon restart nodes on Exynos5410
ARM: dts: exynos: Use label instead of full path in exynos4412-itop-elite
ARM: dts: exynos: Use labels instead of full paths in exynos4412-trats2
ARM: dts: exynos: Use label instead of full path in exynos4412-odroid-common
...
Highlights:
-----------
-Add support of STM32MP157 MPU and stm32mp157c eval board
-Add SD supports on F4 and F7 boards
-Add leds support on stm32f469 and stm32f769 disco boards
-Add push button support on stm32f469 and stm32f769 disco boards
-Add EXTI, SPI, RTC, USB HS/FS support on STM32H743 MCU
-Add RTC and USB OTG HS on stm32f769-disco
-Use dedicated files for F7 pinctrl
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=osrs
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v4.17-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt
Pull "STM32 DT updates for v4.17, round 1" from Alexandre Torgue:
Highlights:
-----------
-Add support of STM32MP157 MPU and stm32mp157c eval board
-Add SD supports on F4 and F7 boards
-Add leds support on stm32f469 and stm32f769 disco boards
-Add push button support on stm32f469 and stm32f769 disco boards
-Add EXTI, SPI, RTC, USB HS/FS support on STM32H743 MCU
-Add RTC and USB OTG HS on stm32f769-disco
-Use dedicated files for F7 pinctrl
* tag 'stm32-dt-for-v4.17-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits)
ARM: dts: stm32: Fix sdio2 rcc hard coded value
dt-bindings: mfd: Add STM32F7 SDMMC2 rcc entry
ARM: dts: stm32: Enable sdio1 for stm32f769-disco
ARM: dts: stm32: Enable sdio1 for stm32f746-eval
ARM: dts: stm32: Enable sdio1 for stm32f746-disco
ARM: dts: stm32: Add sdio pins definition for stm32f7
ARM: dts: stm32: add SPI support on STM32H743 SoC
ARM: dts: stm32: enable RTC on stm32h743i-eval
ARM: dts: stm32: add RTC support on STM32H743
ARM: dts: stm32: enable USB OTG HS on stm32h743i-eval
ARM: dts: stm32: add USB OTG HS and FS support for STM32H743 SoC
ARM: dts: stm32: enable RTC on stm32f769-disco
ARM: dts: stm32: enable USB HS on stm32f769-disco
ARM: dts: stm32: select otg mode for usbotg_hs on stm32746g_eval
ARM: dts: stm32: add gadget fifo sizes to usbotg_hs on stm32f746
ARM: dts: stm32: Add push button to stm32f769 Discovery board
ARM: dts: stm32: Add push button to stm32f469 Discovery board
ARM: dts: stm32: Add leds support to stm32f769 Discovery board
ARM: dts: stm32: Add leds support to stm32f469 Discovery board
ARM: dts: stm32: Fix HSE clock frequency for stm32h743i-disco board
...
This series of changes updates the device tree files for omaps:
- Nokia N9 support for magnetometer
- Update at24 to use atmel as manufacturer for am335x-boneblue
- Add support for am33xx based PDU001 board
- Update Droid 4 touchscreen for reset-gpios and add audio
codec and soundcard
- Remove unused dra7 cooling level nodes
- A series of changes to configure am335x and am437x for PM
- Add pinmuxing for i2c2 and 3 for LogicPD boards
- Add EMIF interrupt infor for am437x and am335x
- Add missing omap3 sound-dai-cells
-----BEGIN PGP SIGNATURE-----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=SDoJ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.17/dt-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "Device tree changes for omap variants for v4.17" from Tony Lindgren:
This series of changes updates the device tree files for omaps:
- Nokia N9 support for magnetometer
- Update at24 to use atmel as manufacturer for am335x-boneblue
- Add support for am33xx based PDU001 board
- Update Droid 4 touchscreen for reset-gpios and add audio
codec and soundcard
- Remove unused dra7 cooling level nodes
- A series of changes to configure am335x and am437x for PM
- Add pinmuxing for i2c2 and 3 for LogicPD boards
- Add EMIF interrupt infor for am437x and am335x
- Add missing omap3 sound-dai-cells
* tag 'omap-for-v4.17/dt-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
ARM: dts: omap4-droid4: add soundcard
ARM: dts: motorola-cpcap-mapphone: add audio-codec
ARM: dts: omap3: Add missing #sound-dai-cells
ARM: dts: am43xx: add emif interrupt info
ARM: dts: am33xx: add emif interrupt info
ARM: dts: Add pinmuxing for i2c2 and i2c3 for LogicPD SOM-LV
ARM: dts: Add pinmuxing for i2c2 and i2c3 for LogicPD torpedo
ARM: dts: am4372: Mark omap_l3_noc with ti,no-idle
ARM: dts: am4372: Mark emif with ti,no-idle
ARM: dts: am33xx: Mark emif with ti,no-idle
ARM: dts: am4372: Add soc node
ARM: dts: am33xx: Add pm-sram phandle to soc node
ARM: dts: am4372: Update emif node
ARM: dts: am33xx: Update emif node
ARM: dts: am4372: Reserve pm code and data regions in ocmcram sram node
ARM: dts: am33xx: Reserve pm code and data regions in ocmcram sram node
ARM: dts: omap: Remove "cooling-{min|max}-level" for CPU nodes
ARM: dts: omap4-droid4: update touchscreen
ARM: dts: am33xx: add PDU001 board
ARM: dts: use 'atmel' as at24 manufacturer in am335x-boneblue
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a common device tree for all Nuvoton NPCM750 BMCs and a board
specific device tree for the NPCM750 (Poleg) evaluation board.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Avi Fishman <avifishman70@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Tomer Maimon <tmaimon77@gmail.com>
Tested-by: Avi Fishman <avifishman70@gmail.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support of stm32mp157c evaluation board (part number: STM32MP157C-EV1)
split in 2 elements:
-Daughter board (part number: STM32MP157C-ED1)
which includes CPU, memory and power supply
-Mother board (part number: STM32MP157C-EM1)
which includes external peripherals (like display, camera,...)
and extension connectors.
The daughter board can run alone, this is why the device tree files
are split in two layers, for the complete evaluation board (ev1)
and for the daughter board alone (ed1).
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add support for Advantech DMS-BA16 board, which uses
the Advantech BA-16 module.
Signed-off-by: Ken Lin <yungching0725@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"Midas" is the codename for a family of smartphones released by Samsung
Mobile. It includes the Galaxy S3 (GT-I9300/I9305) and the Galaxy
Note 2 (GT-N7100/N7105). The boards largely have the same peripherals:
the main differences are touchscreen, display panel and cellular modem.
Signed-off-by: Simon Shields <simon@lineageos.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This patch adds support for the PDU001 board from EETS GmbH.
The board is built around the byteENGINE module AM335X from
bytes at work AG which in turn is built around a Sitara SoC
from TI.
Signed-off-by: Felix Brack <fb@ltec.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Banana Pi M2 Zero board is a H2+-based board by Sinovoip, with a form
factor and GPIO holes similar to Raspberry Pi Zero.
It features:
- Allwinner H2+ SoC
- Single-chip (16-bit) 512MiB DDR3 DRAM
- Ampak AP6212 Wi-Fi/Bluetooth module
- MicroSD slot
- Two MicroUSB Type-B ports (one can only be used to power the board and
the other features OTG functionality)
- Two keys, a reset and a GPIO-connected key.
- HDMI Type-C (miniHDMI) connector connected to the HDMI part of H2+.
- CSI connector to connect the camera sensor provided by Sinovoip.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
A20-SOM204 board has option with onboard 16GB eMMC.
The chip is wired to MMC2 slot.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This is new System-On-Module platform with universal dimm socket for
easy insertation. The EVB board is designed to be universal with
future modules. Product page is located here [1].
There are two dts files - one for base model and another for eMMC variant.
Base features of A20-SOM204 board includes:
* 1GB DDR3 RAM
* AXP209 PMU
* KSZ9031 Gigabit PHY
* AT24C16 EEPROM
* Status LED
* LCD connector
* GPIO connector
There will be variants with the following options:
* Second LAN8710A Megabit PHY
* 16MB SPI Flash memory
* eMMC card
* ATECC508 crypto device
The EVB board has:
* Debug UART
* MicroSD card connector
* USB-OTG connector
* Two USB host
* RTL8723BS WiFi/BT combo
* IrDA transceiver/receiver
* HDMI connector
* VGA connector
* Megabit ethernet transceiver
* Gigabit ethernet transceiver
* SATA connector
* CAN driver
* CSI camera
* MIC and HP connectors
* PCIe x4 connector
* USB3 connector
* Two UEXT connectors
* Two user LEDs
Some of the features are multiplexed and cannot be used the same time:
CAN and Megabit PHY. Others are not usable with A20 SoC: PCIe and USB3.
[1] https://www.olimex.com/Products/SOM204/
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add support for the Computer on Module Colibri iMX6ULL and its
Bluetooth/Wifi variant along with the development/evaluation carrier
board device trees. Follow the usual hierarchic include model,
maintaining shared configuration in imx6ull-colibri.dtsi and
imx6ull-colibri-eval-v3.dtsi respectively.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the PHYTEC phyBOARD-Mira with i.MX 6QuadPlus with NAND.
It is based on the phyBOARD-Mira with i.MX 6Quad/Dual and supports the
same interfaces.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Stefan Lengfeld <s.lengfeld@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the PHYTEC phyBOARD-Mira Low-Cost Rapid Development Kit
with i.MX 6DualLight/Solo with NAND.
Following interfaces are supported:
- 100 MBit Ethernet
- USB Host
- RS232
- HDMI
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the PHYTEC phyBOARD-Mira Rapid Development Kit with
i.MX 6Quad/Dual with eMMC or NAND.
Following interfaces are supported:
- Gigabit Ethernet
- USB Host
- CAN
- RS232
- PCIe
- LVDS
- HDMI
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Other platforms' device-tree files start with a platform prefix, such as
sun7i-a20-*.dts or at91-*.dts.
This naming scheme turns out to be handy when using multi-platform build
systems such as OpenWrt.
Prepend oxnas files with their platform prefix to comply with the naming
scheme already used for most other platforms.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A few random updates for vf610-zii board: correct switch EEPROM size,
enable edma1, correct GPIO expander interrupt, add PHYs for switch2
device.
- LS1021A device tree updates: add reboot and QSPI device nodes, label
USB controllers, specify interrupt-affinity for PMU, fix TMR_FIPER1
setting, enable esdhc device, add Moxa UC-8410A board support.
- A bunch of patches from Fabio: fix reg - unit address mismatches,
remove leading zero in unit address, move regulators out of
simple-bus, move nodes with no reg property out of bus, remove extra
clock cell, add missing phy-cells to usb-nop-xceiv, etc.
- A couple series from Hummingboard developers: re-organise device tree
files for better handling various board versions, and then add the
new hummingboard2 board support on top of that.
- Disable AC'97 input pins pad and add support for powering off for
imx6qdl-udoo board.
- Convert from fbdev to drm bindings for imx6sx-sdb and imx6sl-evk
board.
- Add device tree for Variscite DART-MX6 SoM and Carrier-board support.
- Add new board support of TS-4600 and TS-7970 from Technologic
Systems.
- A series from Stefan to update imx7-colibri device tree and then add
new version of Toradex Colibri iMX7D board with eMMC support.
- Other random updates on various board support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaTDRSAAoJEFBXWFqHsHzO5qwIAJ9iqSd41KE50kX2QPWa6Uqa
Dfj0BcR4RdFpf4FqCOM6ntjVhUEyxNUtwINuMr6eCI8BK1NGeLNJGm9LK77/RwoE
wmUFTcGelzx4iEWVouD1NoCxIvVFm5RyO26JC/0GPUbulKvcTRma+GQBV218ZOcz
5GYZ2vlmvddwfgNCF+w2tRB07s5kFKWk9S+w7oDd2qF4qztOzBWMr+i5gdtLAboc
iaWS1+9RQu1FbtuanHAbCFmaQrPV2YsDnnIQYMBqpKlFoO7oUSJCDkINWy0BXq7f
eXXLj/hwc8cAC0MM5kuvScEcgKth0p7W0kQETzC19v1EFYx1CxFwFjxXYQ16iCQ=
=1F3D
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "i.MX device tree changes for 4.16" from Shawn Guo:
- A few random updates for vf610-zii board: correct switch EEPROM size,
enable edma1, correct GPIO expander interrupt, add PHYs for switch2
device.
- LS1021A device tree updates: add reboot and QSPI device nodes, label
USB controllers, specify interrupt-affinity for PMU, fix TMR_FIPER1
setting, enable esdhc device, add Moxa UC-8410A board support.
- A bunch of patches from Fabio: fix reg - unit address mismatches,
remove leading zero in unit address, move regulators out of
simple-bus, move nodes with no reg property out of bus, remove extra
clock cell, add missing phy-cells to usb-nop-xceiv, etc.
- A couple series from Hummingboard developers: re-organise device tree
files for better handling various board versions, and then add the
new hummingboard2 board support on top of that.
- Disable AC'97 input pins pad and add support for powering off for
imx6qdl-udoo board.
- Convert from fbdev to drm bindings for imx6sx-sdb and imx6sl-evk
board.
- Add device tree for Variscite DART-MX6 SoM and Carrier-board support.
- Add new board support of TS-4600 and TS-7970 from Technologic
Systems.
- A series from Stefan to update imx7-colibri device tree and then add
new version of Toradex Colibri iMX7D board with eMMC support.
- Other random updates on various board support.
* tag 'imx-dt-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (126 commits)
ARM: dts: imx7s: Avoid using label in unit address and reg
ARM: dts: imx51-zii-rdu1: Add missing #phy-cells to usb-nop-xceiv
ARM: dts: imx6qdl-hummingboard2: Remove leading zero in unit address
ARM: dts: ls1021a: add support for Moxa UC-8410A open platform
ARM: dts: imx51-babbage: Fix the 26MHz clock modelling
ARM: dts: vf610-zii-dev-rev-b: add PHYs for switch2
ARM: dts: vf610-zii-dev-rev-b: fix interrupt for GPIO expander
ARM: dts: vf610-zii-dev: enable edma1
ARM: dts: ls1021a-twr: Remove extra clock cell
ARM: dts: ls1021a-qds: Remove extra clock cell
ARM: dts: imx53: add srtc node
dt-bindings: imx-gpcv2: Fix the unit address
ARM: imx: dts: Use lower case for bindings notation
ARM: dts: imx6q-h100: use usdhc2 VSELECT
ARM: dts: imx6sx: Add support for PCI power domain
ARM: dts: imx6sx: Fix PCI non-prefetchable memory range
ARM: dts: imx6qdl-hummingboard2: rename regulators to match schematic
ARM: dts: imx6qdl-hummingboard2: add v1.5 som with eMMC
ARM: dts: imx6qdl-hummingboard2: add v1.5 som without eMMC
ARM: dts: imx6qdl-hummingboard2: add PWM3 support
...
Clock driver support:
Rework all platforms to use proper clock bindings. Linux should now boot
upstream kernels on ast2400 and ast2500 platforms without out of tree
patches.
New systems:
Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400
We also see updates to the Palmetto and Romulus systems to bring them in
line with the functionality of those above.
The systems take advantage of recently added drivers for LPC Snoop
device and the PWM/Tachometer fan controller.
OpenBMC flash layout:
The flash layout used OpenBMC systems is added and the device trees now
use it.
-----BEGIN PGP SIGNATURE-----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=H9im
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.16-devicetree' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt
Pull "ASPEED device tree updates for 4.16" from Joel Stanley:
Clock driver support:
Rework all platforms to use proper clock bindings. Linux should now boot
upstream kernels on ast2400 and ast2500 platforms without out of tree
patches.
New systems:
Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400
We also see updates to the Palmetto and Romulus systems to bring them in
line with the functionality of those above.
The systems take advantage of recently added drivers for LPC Snoop
device and the PWM/Tachometer fan controller.
OpenBMC flash layout:
The flash layout used OpenBMC systems is added and the device trees now
use it.
* tag 'aspeed-4.16-devicetree' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed-evb: Add unit name to memory node
ARM: dts: aspeed-plametto: Add flash layout and fix memory node
ARM: dts: aspeed-romulus: Update Romulus system
ARM: dts: aspeed: Add Qanta Q71L BMC machine
ARM: dts: aspeed: Add Ingrasys Zaius BMC machine
ARM: dts: aspeed: Add Witherspoon BMC machine
ARM: dts: aspeed: Sort ASPEED entries in makefile
ARM: dts: Add OpenBMC flash layout
ARM: dts: aspeed: Update license headers
ARM: dts: aspeed: Remove skeleton.dtsi
ARM: dts: aspeed: Add LPC Snoop device
ARM: dts: aspeed: Add PWM and tachometer node
ARM: dts: aspeed: Add clock phandle to GPIO
ARM: dts: aspeed: Add flash controller clocks
ARM: dts: aspeed: Add watchdog clocks
ARM: dts: aspeed: Add MAC clocks
ARM: dts: aspeed: Add proper clock references
ARM: dts: aspeed: Add LPC and child devices
dt-bindings: gpio: Add ASPEED constants
dt-bindings: clock: Add ASPEED constants
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New boards:
- Axentia Nattis with Natte power
- sama5d2 PTC ek
- Document and use extended TCB bindings
-----BEGIN PGP SIGNATURE-----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=BW4/
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.16-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt
DT for 4.16
- New boards:
- Axentia Nattis with Natte power
- sama5d2 PTC ek
- Document and use extended TCB bindings
* tag 'at91-ab-4.16-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
ARM: dts: at91: sama5d2_ptc_ek: use TCB0 as timers
ARM: dts: at91: sama5d27_som1_ek: use TCB0 as timers
ARM: dts: at91: sama5d2 Xplained: use TCB0 as timers
ARM: dts: at91: sama5d2: TC blocks are also simple-mfd and syscon devices
ARM: dts: at91: vinco: use TCB2 as timers
ARM: dts: at91: ma5d4: use TCB2 as timers
ARM: dts: at91: sama5d4 Xplained: use TCB2 as timers
ARM: dts: at91: sama5d4ek: use TCB2 as timers
ARM: dts: at91: sama5d4: Add TCB2
ARM: dts: at91: sama5d4: TC blocks are also simple-mfd and syscon devices
ARM: dts: at91: linea/tse850-3: use TCB0 as timers
ARM: dts: at91: sama5d3xek_cmp: use TCB0 as timers
ARM: dts: at91: kizbox2: use TCB0 as timers
ARM: dts: at91: sama5d3 Xplained: use TCB0 as timers
ARM: dts: at91: sama5d3xek: use TCB0 as timers
ARM: dts: at91: sama5d3: TC blocks are also simple-mfd and syscon devices
ARM: dts: at91: kizboxmini: use TCB0 as timers
ARM: dts: at91: cosino: use TCB0 as timers
ARM: dts: at91: acme/g25: use TCB0 as timers
ARM: dts: at91: at91sam9x5cm: use TCB0 as timers
...
Signed-off-by: Olof Johansson <olof@lixom.net>
A random assortment of improvements.
GPIO device nodes are added for the AXP813/AXP818 PMICs, meaning we can
finally use the GPIO pins on the PMICs. The LDOs on the GPIO pins can
also be properly muxed and guarded.
EMAC Ethernet support is enabled for more H3 boards, and also for the
A83T, following the return of the bindings in 4.15, after a last minute
revert in 4.13. This will make the H3/A83T boards much more useful in
headless applications.
Two new boards are introduced. The Orange Pi R1 is a small board with
two Ethernet interfaces (one EMAC-based and one USB-based) and a WiFi
chip. This board is fully supported, with the exception of TV-out on
the expansion header, which will not be enabled by default. The WiFi
chip (RTL8189FTV) requires an out-of-tree driver. The Libre Computer
Board ALL-H3-CC H3 version is a newcomer to the Allwinner SBC space,
which was mostly represented by a bunch of fruit-Pis. It is mostly
supported, with the exception of HDMI and camera sensor interface,
which have not been implemented yet.
Two minor patches enable the audio codec on the A13 Olinuxino, and
HDMI output on the pcDuino3 Nano.
-----BEGIN PGP SIGNATURE-----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=UDxH
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.16
A random assortment of improvements.
GPIO device nodes are added for the AXP813/AXP818 PMICs, meaning we can
finally use the GPIO pins on the PMICs. The LDOs on the GPIO pins can
also be properly muxed and guarded.
EMAC Ethernet support is enabled for more H3 boards, and also for the
A83T, following the return of the bindings in 4.15, after a last minute
revert in 4.13. This will make the H3/A83T boards much more useful in
headless applications.
Two new boards are introduced. The Orange Pi R1 is a small board with
two Ethernet interfaces (one EMAC-based and one USB-based) and a WiFi
chip. This board is fully supported, with the exception of TV-out on
the expansion header, which will not be enabled by default. The WiFi
chip (RTL8189FTV) requires an out-of-tree driver. The Libre Computer
Board ALL-H3-CC H3 version is a newcomer to the Allwinner SBC space,
which was mostly represented by a bunch of fruit-Pis. It is mostly
supported, with the exception of HDMI and camera sensor interface,
which have not been implemented yet.
Two minor patches enable the audio codec on the A13 Olinuxino, and
HDMI output on the pcDuino3 Nano.
* tag 'sunxi-dt-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: h3: nanopi-m1-plus: fix missing ethernet 0 in aliases
ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Nanopi M1
ARM: dts: sun7i: Enable HDMI on pcDuino3 Nano
ARM: dts: sun8i: a83t: Add I2C device nodes and pinmux settings
ARM: dts: sun8i: a83t: Add I2S controller device nodes
ARM: dts: sun8i-h3: Remove allwinner,leds-active-low for non internal PHY
ARM: dts: sun8i: a83t: Enable Ethernet on two boards
ARM: dts: sun8i: a83t: add dwmac-sun8i device node
ARM: dts: sun8i: h3: enable USB OTG for NanoPi Neo board
ARM: dts: sun8i: h3: Add dts file for Libre Computer Board ALL-H3-CC H3 ver.
ARM: dtsi: axp81x: set pinmux for GPIO0/1 when used as LDOs
ARM: dtsi: axp81x: add GPIO DT node
ARM: dts: sun8i: add support for Orange Pi R1
ARM: dts: sunxi: Add codec for A13 Olinuxino
Signed-off-by: Olof Johansson <olof@lixom.net>
This branch mostly configures more hardware support:
- Clean-up dts files to remove leading 0x and 0s from binding notation
to remove more dtc compiler warnings
- A series of am437x updates for backlight, to fix inverted pad
pull macro, and to configure power management related OPPs
- Configure n950 and droid 4 command mode LCD panels
- Updates to pandora and gta04 LCD panels
- Add support for am574x-idk
- A series of changes to configure more dra7 related PCIe features
- A series of fixes for am335x-boneblue for WLAN, UARTs and CAN
configuration
- A series of changes to configure dra7 OPPs and VDD supplies
-----BEGIN PGP SIGNATURE-----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=G2ZQ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.16/dt-pt2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Second set of device tree changes for omaps for v4.16 merge window
This branch mostly configures more hardware support:
- Clean-up dts files to remove leading 0x and 0s from binding notation
to remove more dtc compiler warnings
- A series of am437x updates for backlight, to fix inverted pad
pull macro, and to configure power management related OPPs
- Configure n950 and droid 4 command mode LCD panels
- Updates to pandora and gta04 LCD panels
- Add support for am574x-idk
- A series of changes to configure more dra7 related PCIe features
- A series of fixes for am335x-boneblue for WLAN, UARTs and CAN
configuration
- A series of changes to configure dra7 OPPs and VDD supplies
* tag 'omap-for-v4.16/dt-pt2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (29 commits)
Revert "ARM: dts: dra7: Add properties to enable PCIe x2 lane mode"
ARM: dts: am572x-idk: Add cpu0 vdd supply
ARM: dts: am571x-idk: Add cpu0 vdd supply
ARM: dts: dra72-evm-tps65917: Add cpu0 vdd supply
ARM: dts: dra7-evm: Add cpu0 vdd supply
ARM: dts: am57xx-beagle-x15-common: Add cpu0 vdd supply
ARM: dts: dra7: Enable 1.5 GHz operation for the CPU
ARM: dts: dra7: Add MPU OPP supply node
ARM: dts: dra7: Add vbb-supply to cpu and additional voltages
ARM: dts: am335x-boneblue: enable can
ARM: dts: am335x-boneblue: enable usarts
ARM: dts: am335x-boneblue: fix wl1835 IRQ pin
ARM: dts: dra7: Remove deprecated PCI compatible string
ARM: dts: dra76-evm: Enable x2 PCIe lanes
ARM: dts: DRA72x: Use PCIe compatible specific to dra72
ARM: dts: DRA74x: Use PCIe compatible specific to dra74
ARM: dts: dra7: Add properties to enable PCIe x2 lane mode
ARM: dts: am57xx: Add support for am574x-idk
ARM: dts: am43x-epos-evm: Hook dcdc2 as the cpu0-supply
ARM: dts: am437x-idk-evm: Disable OPP50 for MPU
...
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds a DT for the Allo.com Sparky SBC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJaPNjXAAoJEPou0S0+fgE/8hoP/jpuBNw74lb+ZIUoIdgKZqY9
pdxo8F7wUKotN3/DhdZnNi0thpYMSo14iFHO0ydB4anrM3oI5tAW8kIlfrVaFFLk
eivC9FZB9AT2QWB52Os3rzPtx+ax4x6lhM9wYKYU9nMQ5oeQy7TpRNuEkE5eEQW3
KXwNSb0fBVwnnPXvV3baw3CAuQDkX3kBBCfi3NjIc6AwIkl6lsX/ATjLdwLRu85N
I5ZfsfKlxTyqe6PqVthq4Qp1c5u/l5m2WqWRbuwn/uhjIHHEDfUllPSWqHan9++o
6tPcs62so5hFsQpeYv6HsXaWrY4e1mDFaNXtWXNAyXCanSn2qGrzixLrQXFkLAAm
TeA1uVuumMvUBIjot38y4yAvrlE5A1ucHyk9PI7IbzPgkPVJwJWQga7km/rFu93R
LcjjPhDlvGNoTph0Hpzw84BxuLCkoCMa//okgeLsYc5EN/yjeAdGwB6jfyfcp3UB
R8jUrtv9ZI6nwUfUdDs9JMd/rTk3Kx94nDgT7Rvyd7tpe4b28Jjhhs6+GqJUaQAU
k8MT0IycMUhejibfdxJGgDZ+4J/ya/o2DLS4rbl/FBDCCGtT7n+gmQtsCU/yD1/5
l0qBzSTKxhSGyEpUzpm9A5rouAjjiqlw4t7DO1FBGMEXpllarSg55Esj+tdDAk7S
iIebCq9pnKeqWv3sfQPx
=z7/8
-----END PGP SIGNATURE-----
Merge tag 'actions-arm-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt
Actions Semi arm based SoC DT for v4.16
This adds a DT for the Allo.com Sparky SBC.
* tag 'actions-arm-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
arm: dts: owl-s500: Add Sparky
dt-bindings: arm: actions: Add Sparky
dt-bindings: Add vendor prefix for Allo.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Add support for Moxa UC-8410A open platform
The UC-8410A computing platform is designed
for embedded communication-centric industrial applications
The features of UC-8410A are:
* QSPI flash
* SD slot
* 3x LAN
* 8x RS-232/422/485 ports, software-selectable
* Mini PCIe form factor with PCIe/USB signal
* 2x USB host
* TPM
* Watchdog
* RTC
* User LEDs
* Beeper
* Push button
Signed-off-by: Jimmy Chen <jimmy.chen@moxa.com>
Signed-off-by: Harry YJ Jhou <harryyj.jhou@moxa.com>
Signed-off-by: SZ Lin <sz.lin@moxa.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the v1.5 SOM with TI Wi-Fi and eMMC. As the pinmux
settings are different for the microsom, we need to use a separate
board-level dts for this as there is no support for overlays.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the v1.5 SOM with TI Wi-Fi but without eMMC. As the
pinmux settings are different for the microsom, we need to use a
separate board-level dts for this as there is no support for overlays.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for the Hummingboard Gate and Edge devices from
SolidRun.
Signed-off-by: Jon Nettleton <jon@solid-run.com>
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Brian Yang