For pick_next_task_fair() it is the newidle balance that requires
dropping the rq->lock; provided we do put_prev_task() early, we can
also detect the condition for doing newidle early.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aaron Lu <aaron.lwe@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: mingo@kernel.org
Cc: Phil Auld <pauld@redhat.com>
Cc: Julien Desfossez <jdesfossez@digitalocean.com>
Cc: Nishanth Aravamudan <naravamudan@digitalocean.com>
Link: https://lkml.kernel.org/r/9e3eb1859b946f03d7e500453a885725b68957ba.1559129225.git.vpillai@digitalocean.com
In preparation of further separating pick_next_task() and
set_curr_task() we have to pass the actual task into it, while there,
rename the thing to better pair with put_prev_task().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aaron Lu <aaron.lwe@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: mingo@kernel.org
Cc: Phil Auld <pauld@redhat.com>
Cc: Julien Desfossez <jdesfossez@digitalocean.com>
Cc: Nishanth Aravamudan <naravamudan@digitalocean.com>
Link: https://lkml.kernel.org/r/a96d1bcdd716db4a4c5da2fece647a1456c0ed78.1559129225.git.vpillai@digitalocean.com
The CPU hotplug task selection is the only place where we used
put_prev_task() on a task that is not current. While looking at that,
it occured to me that we can simplify all that by by using a custom
pick loop.
Since we don't need to put current, we can do away with the fake task
too.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aaron Lu <aaron.lwe@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: mingo@kernel.org
Cc: Phil Auld <pauld@redhat.com>
Cc: Julien Desfossez <jdesfossez@digitalocean.com>
Cc: Nishanth Aravamudan <naravamudan@digitalocean.com>
Because pick_next_task() implies set_curr_task() and some of the
details haven't mattered too much, some of what _should_ be in
set_curr_task() ended up in pick_next_task, correct this.
This prepares the way for a pick_next_task() variant that does not
affect the current state; allowing remote picking.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aaron Lu <aaron.lwe@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: mingo@kernel.org
Cc: Phil Auld <pauld@redhat.com>
Cc: Julien Desfossez <jdesfossez@digitalocean.com>
Cc: Nishanth Aravamudan <naravamudan@digitalocean.com>
Link: https://lkml.kernel.org/r/38c61d5240553e043c27c5e00b9dd0d184dd6081.1559129225.git.vpillai@digitalocean.com
It has been observed, that highly-threaded, non-cpu-bound applications
running under cpu.cfs_quota_us constraints can hit a high percentage of
periods throttled while simultaneously not consuming the allocated
amount of quota. This use case is typical of user-interactive non-cpu
bound applications, such as those running in kubernetes or mesos when
run on multiple cpu cores.
This has been root caused to cpu-local run queue being allocated per cpu
bandwidth slices, and then not fully using that slice within the period.
At which point the slice and quota expires. This expiration of unused
slice results in applications not being able to utilize the quota for
which they are allocated.
The non-expiration of per-cpu slices was recently fixed by
'commit 512ac999d2 ("sched/fair: Fix bandwidth timer clock drift
condition")'. Prior to that it appears that this had been broken since
at least 'commit 51f2176d74 ("sched/fair: Fix unlocked reads of some
cfs_b->quota/period")' which was introduced in v3.16-rc1 in 2014. That
added the following conditional which resulted in slices never being
expired.
if (cfs_rq->runtime_expires != cfs_b->runtime_expires) {
/* extend local deadline, drift is bounded above by 2 ticks */
cfs_rq->runtime_expires += TICK_NSEC;
Because this was broken for nearly 5 years, and has recently been fixed
and is now being noticed by many users running kubernetes
(https://github.com/kubernetes/kubernetes/issues/67577) it is my opinion
that the mechanisms around expiring runtime should be removed
altogether.
This allows quota already allocated to per-cpu run-queues to live longer
than the period boundary. This allows threads on runqueues that do not
use much CPU to continue to use their remaining slice over a longer
period of time than cpu.cfs_period_us. However, this helps prevent the
above condition of hitting throttling while also not fully utilizing
your cpu quota.
This theoretically allows a machine to use slightly more than its
allotted quota in some periods. This overflow would be bounded by the
remaining quota left on each per-cpu runqueueu. This is typically no
more than min_cfs_rq_runtime=1ms per cpu. For CPU bound tasks this will
change nothing, as they should theoretically fully utilize all of their
quota in each period. For user-interactive tasks as described above this
provides a much better user/application experience as their cpu
utilization will more closely match the amount they requested when they
hit throttling. This means that cpu limits no longer strictly apply per
period for non-cpu bound applications, but that they are still accurate
over longer timeframes.
This greatly improves performance of high-thread-count, non-cpu bound
applications with low cfs_quota_us allocation on high-core-count
machines. In the case of an artificial testcase (10ms/100ms of quota on
80 CPU machine), this commit resulted in almost 30x performance
improvement, while still maintaining correct cpu quota restrictions.
That testcase is available at https://github.com/indeedeng/fibtest.
Fixes: 512ac999d2 ("sched/fair: Fix bandwidth timer clock drift condition")
Signed-off-by: Dave Chiluk <chiluk+linux@indeed.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Ben Segall <bsegall@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Hammond <jhammond@indeed.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kyle Anderson <kwa@yelp.com>
Cc: Gabriel Munos <gmunoz@netflix.com>
Cc: Peter Oskolkov <posk@posk.io>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Brendan Gregg <bgregg@netflix.com>
Link: https://lkml.kernel.org/r/1563900266-19734-2-git-send-email-chiluk+linux@indeed.com
The current active_mm reference counting is confusing and sub-optimal.
Rewrite the code to explicitly consider the 4 separate cases:
user -> user
When switching between two user tasks, all we need to consider
is switch_mm().
user -> kernel
When switching from a user task to a kernel task (which
doesn't have an associated mm) we retain the last mm in our
active_mm. Increment a reference count on active_mm.
kernel -> kernel
When switching between kernel threads, all we need to do is
pass along the active_mm reference.
kernel -> user
When switching between a kernel and user task, we must switch
from the last active_mm to the next mm, hoping of course that
these are the same. Decrement a reference on the active_mm.
The code keeps a different order, because as you'll note, both 'to
user' cases require switch_mm().
And where the old code would increment/decrement for the 'kernel ->
kernel' case, the new code observes this is a neutral operation and
avoids touching the reference count.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: luto@kernel.org
When a process creates a new trigger by writing into /proc/pressure/*
files, permissions to write such a file should be used to determine whether
the process is allowed to do so or not. Current implementation would also
require such a process to have setsched capability. Setting of psi trigger
thread's scheduling policy is an implementation detail and should not be
exposed to the user level. Remove the permission check by using _nocheck
version of the function.
Suggested-by: Nick Kralevich <nnk@google.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: lizefan@huawei.com
Cc: mingo@redhat.com
Cc: akpm@linux-foundation.org
Cc: kernel-team@android.com
Cc: dennisszhou@gmail.com
Cc: dennis@kernel.org
Cc: hannes@cmpxchg.org
Cc: axboe@kernel.dk
Link: https://lkml.kernel.org/r/20190730013310.162367-1-surenb@google.com
PSI defaults to a FIFO-99 thread, reduce this to FIFO-1.
FIFO-99 is the very highest priority available to SCHED_FIFO and
it not a suitable default; it would indicate the psi work is the
most important work on the machine.
Since Real-Time tasks will have pre-allocated memory and locked it in
place, Real-Time tasks do not care about PSI. All it needs is to be
above OTHER.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
The TASKS03 and TREE04 rcutorture scenarios produce the following
lockdep complaint:
------------------------------------------------------------------------
================================
WARNING: inconsistent lock state
5.2.0-rc1+ #513 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
migration/1/14 [HC0[0]:SC0[0]:HE1:SE1] takes:
(____ptrval____) (tick_broadcast_lock){?...}, at: tick_broadcast_offline+0xf/0x70
{IN-HARDIRQ-W} state was registered at:
lock_acquire+0xb0/0x1c0
_raw_spin_lock_irqsave+0x3c/0x50
tick_broadcast_switch_to_oneshot+0xd/0x40
tick_switch_to_oneshot+0x4f/0xd0
hrtimer_run_queues+0xf3/0x130
run_local_timers+0x1c/0x50
update_process_times+0x1c/0x50
tick_periodic+0x26/0xc0
tick_handle_periodic+0x1a/0x60
smp_apic_timer_interrupt+0x80/0x2a0
apic_timer_interrupt+0xf/0x20
_raw_spin_unlock_irqrestore+0x4e/0x60
rcu_nocb_gp_kthread+0x15d/0x590
kthread+0xf3/0x130
ret_from_fork+0x3a/0x50
irq event stamp: 171
hardirqs last enabled at (171): [<ffffffff8a201a37>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (170): [<ffffffff8a201a53>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last enabled at (0): [<ffffffff8a264ee0>] copy_process.part.56+0x650/0x1cb0
softirqs last disabled at (0): [<0000000000000000>] 0x0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(tick_broadcast_lock);
<Interrupt>
lock(tick_broadcast_lock);
*** DEADLOCK ***
1 lock held by migration/1/14:
#0: (____ptrval____) (clockevents_lock){+.+.}, at: tick_offline_cpu+0xf/0x30
stack backtrace:
CPU: 1 PID: 14 Comm: migration/1 Not tainted 5.2.0-rc1+ #513
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x5e/0x8b
print_usage_bug+0x1fc/0x216
? print_shortest_lock_dependencies+0x1b0/0x1b0
mark_lock+0x1f2/0x280
__lock_acquire+0x1e0/0x18f0
? __lock_acquire+0x21b/0x18f0
? _raw_spin_unlock_irqrestore+0x4e/0x60
lock_acquire+0xb0/0x1c0
? tick_broadcast_offline+0xf/0x70
_raw_spin_lock+0x33/0x40
? tick_broadcast_offline+0xf/0x70
tick_broadcast_offline+0xf/0x70
tick_offline_cpu+0x16/0x30
take_cpu_down+0x7d/0xa0
multi_cpu_stop+0xa2/0xe0
? cpu_stop_queue_work+0xc0/0xc0
cpu_stopper_thread+0x6d/0x100
smpboot_thread_fn+0x169/0x240
kthread+0xf3/0x130
? sort_range+0x20/0x20
? kthread_cancel_delayed_work_sync+0x10/0x10
ret_from_fork+0x3a/0x50
------------------------------------------------------------------------
To reproduce, run the following rcutorture test:
tools/testing/selftests/rcutorture/bin/kvm.sh --duration 5 --kconfig "CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y" --configs "TASKS03 TREE04"
It turns out that tick_broadcast_offline() was an innocent bystander.
After all, interrupts are supposed to be disabled throughout
take_cpu_down(), and therefore should have been disabled upon entry to
tick_offline_cpu() and thus to tick_broadcast_offline(). This suggests
that one of the CPU-hotplug notifiers was incorrectly enabling interrupts,
and leaving them enabled on return.
Some debugging code showed that the culprit was sched_cpu_dying().
It had irqs enabled after return from sched_tick_stop(). Which in turn
had irqs enabled after return from cancel_delayed_work_sync(). Which is a
wrapper around __cancel_work_timer(). Which can sleep in the case where
something else is concurrently trying to cancel the same delayed work,
and as Thomas Gleixner pointed out on IRC, sleeping is a decidedly bad
idea when you are invoked from take_cpu_down(), regardless of the state
you leave interrupts in upon return.
Code inspection located no reason why the delayed work absolutely
needed to be canceled from sched_tick_stop(): The work is not
bound to the outgoing CPU by design, given that the whole point is
to collect statistics without disturbing the outgoing CPU.
This commit therefore simply drops the cancel_delayed_work_sync() from
sched_tick_stop(). Instead, a new ->state field is added to the tick_work
structure so that the delayed-work handler function sched_tick_remote()
can avoid reposting itself. A cpu_is_offline() check is also added to
sched_tick_remote() to avoid mucking with the state of an offlined CPU
(though it does appear safe to do so). The sched_tick_start() and
sched_tick_stop() functions also update ->state, and sched_tick_start()
also schedules the delayed work if ->state indicates that it is not
already in flight.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
[ paulmck: Apply Peter Zijlstra and Frederic Weisbecker atomics feedback. ]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
SCHED_DEADLINE inactive timer needs to run in hardirq context (as
dl_task_timer already does) on PREEMPT_RT
Change the mode to HRTIMER_MODE_REL_HARD.
[ tglx: Fixed up the start site, so mode debugging works ]
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190731103715.4047-1-juri.lelli@redhat.com
The scheduler related hrtimers need to expire in hard interrupt context
even on PREEMPT_RT enabled kernels. Mark then as such.
No functional change.
[ tglx: Split out from larger combo patch. Add changelog. ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185753.077004842@linutronix.de
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by
CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same
functionality which today depends on CONFIG_PREEMPT.
Switch the preemption code, scheduler and init task over to use
CONFIG_PREEMPTION.
That's the first step towards RT in that area. The more complex changes are
coming separately.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20190726212124.117528401@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Compiling a kernel with both FAIR_GROUP_SCHED=n and RT_GROUP_SCHED=n
will generate a compiler warning:
kernel/sched/core.c: In function 'sched_init':
kernel/sched/core.c:5906:32: warning: variable 'ptr' set but not used
It is unnecessary to have both "alloc_size" and "ptr", so just combine
them.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: valentin.schneider@arm.com
Link: https://lkml.kernel.org/r/20190720012319.884-1-cai@lca.pw
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On !CONFIG_RT_GROUP_SCHED configurations it is currently not possible to
move RT tasks between cgroups to which CPU controller has been attached;
but it is oddly possible to first move tasks around and then make them
RT (setschedule to FIFO/RR).
E.g.:
# mkdir /sys/fs/cgroup/cpu,cpuacct/group1
# chrt -fp 10 $$
# echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks
bash: echo: write error: Invalid argument
# chrt -op 0 $$
# echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks
# chrt -fp 10 $$
# cat /sys/fs/cgroup/cpu,cpuacct/group1/tasks
2345
2598
# chrt -p 2345
pid 2345's current scheduling policy: SCHED_FIFO
pid 2345's current scheduling priority: 10
Also, as Michal noted, it is currently not possible to enable CPU
controller on unified hierarchy with !CONFIG_RT_GROUP_SCHED (if there
are any kernel RT threads in root cgroup, they can't be migrated to the
newly created CPU controller's root in cgroup_update_dfl_csses()).
Existing code comes with a comment saying the "we don't support RT-tasks
being in separate groups". Such comment is however stale and belongs to
pre-RT_GROUP_SCHED times. Also, it doesn't make much sense for
!RT_GROUP_ SCHED configurations, since checks related to RT bandwidth
are not performed at all in these cases.
Make moving RT tasks between CPU controller groups viable by removing
special case check for RT (and DEADLINE) tasks.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: rostedt@goodmis.org
Link: https://lkml.kernel.org/r/20190719063455.27328-1-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
No synchronisation mechanism exists between the cpuset subsystem and
calls to function __sched_setscheduler(). As such, it is possible that
new root domains are created on the cpuset side while a deadline
acceptance test is carried out in __sched_setscheduler(), leading to a
potential oversell of CPU bandwidth.
Grab cpuset_rwsem read lock from core scheduler, so to prevent
situations such as the one described above from happening.
The only exception is normalize_rt_tasks() which needs to work under
tasklist_lock and can't therefore grab cpuset_rwsem. We are fine with
this, as this function is only called by sysrq and, if that gets
triggered, DEADLINE guarantees are already gone out of the window
anyway.
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: mathieu.poirier@linaro.org
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-9-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the topology of root domains is modified by CPUset or CPUhotplug
operations information about the current deadline bandwidth held in the
root domain is lost.
This patch addresses the issue by recalculating the lost deadline
bandwidth information by circling through the deadline tasks held in
CPUsets and adding their current load to the root domain they are
associated with.
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
[ Various additional modifications. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-4-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Calls to task_rq_unlock() are done several times in the
__sched_setscheduler() function. This is fine when only the rq lock needs to be
handled but not so much when other locks come into play.
This patch streamlines the release of the rq lock so that only one
location need to be modified when dealing with more than one lock.
No change of functionality is introduced by this patch.
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-3-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduce the partition_sched_domains_locked() function by taking
the mutex locking code out of the original function. That way
the work done by partition_sched_domains_locked() can be reused
without dropping the mutex lock.
No change of functionality is introduced by this patch.
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: rostedt@goodmis.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-2-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The same formula to check utilization against capacity (after
considering capacity_margin) is already used at 5 different locations.
This patch creates a new macro, fits_capacity(), which can be used from
all these locations without exposing the details of it and hence
simplify code.
All the 5 code locations are updated as well to use it..
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/b477ac75a2b163048bdaeb37f57b4c3f04f75a31.1559631700.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In real product setup, there will be houseeking CPUs in each nodes, it
is prefer to do housekeeping from local node, fallback to global online
cpumask if failed to find houseeking CPU from local node.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1561711901-4755-2-git-send-email-wanpengli@tencent.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
sched_info_on() is called with unlikely hint, however, the test
is to be a constant(1) on which compiler will do nothing when
make defconfig, so remove the hint.
Also, fix a lack of {}.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: up2wing@gmail.com
Cc: wang.liang82@zte.com.cn
Cc: xue.zhihong@zte.com.cn
Link: https://lkml.kernel.org/r/1562301307-43002-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We try to find an idle CPU to run the next task, but in case we don't
find an idle CPU it is better to pick a CPU which will run the task the
soonest, for performance reason.
A CPU which isn't idle but has only SCHED_IDLE activity queued on it
should be a good target based on this criteria as any normal fair task
will most likely preempt the currently running SCHED_IDLE task
immediately. In fact, choosing a SCHED_IDLE CPU over a fully idle one
shall give better results as it should be able to run the task sooner
than an idle CPU (which requires to be woken up from an idle state).
This patch updates both fast and slow paths with this optimization.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: chris.redpath@arm.com
Cc: quentin.perret@linaro.org
Cc: songliubraving@fb.com
Cc: steven.sistare@oracle.com
Cc: subhra.mazumdar@oracle.com
Cc: tkjos@google.com
Link: https://lkml.kernel.org/r/eeafa25fdeb6f6edd5b2da716bc8f0ba7708cbcf.1561523542.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
time/tick-broadcast: Fix tick_broadcast_offline() lockdep complaint
The TASKS03 and TREE04 rcutorture scenarios produce the following
lockdep complaint:
WARNING: inconsistent lock state
5.2.0-rc1+ #513 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
migration/1/14 [HC0[0]:SC0[0]:HE1:SE1] takes:
(____ptrval____) (tick_broadcast_lock){?...}, at: tick_broadcast_offline+0xf/0x70
{IN-HARDIRQ-W} state was registered at:
lock_acquire+0xb0/0x1c0
_raw_spin_lock_irqsave+0x3c/0x50
tick_broadcast_switch_to_oneshot+0xd/0x40
tick_switch_to_oneshot+0x4f/0xd0
hrtimer_run_queues+0xf3/0x130
run_local_timers+0x1c/0x50
update_process_times+0x1c/0x50
tick_periodic+0x26/0xc0
tick_handle_periodic+0x1a/0x60
smp_apic_timer_interrupt+0x80/0x2a0
apic_timer_interrupt+0xf/0x20
_raw_spin_unlock_irqrestore+0x4e/0x60
rcu_nocb_gp_kthread+0x15d/0x590
kthread+0xf3/0x130
ret_from_fork+0x3a/0x50
irq event stamp: 171
hardirqs last enabled at (171): [<ffffffff8a201a37>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (170): [<ffffffff8a201a53>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last enabled at (0): [<ffffffff8a264ee0>] copy_process.part.56+0x650/0x1cb0
softirqs last disabled at (0): [<0000000000000000>] 0x0
[...]
To reproduce, run the following rcutorture test:
$ tools/testing/selftests/rcutorture/bin/kvm.sh --duration 5 --kconfig "CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y" --configs "TASKS03 TREE04"
It turns out that tick_broadcast_offline() was an innocent bystander.
After all, interrupts are supposed to be disabled throughout
take_cpu_down(), and therefore should have been disabled upon entry to
tick_offline_cpu() and thus to tick_broadcast_offline(). This suggests
that one of the CPU-hotplug notifiers was incorrectly enabling interrupts,
and leaving them enabled on return.
Some debugging code showed that the culprit was sched_cpu_dying().
It had irqs enabled after return from sched_tick_stop(). Which in turn
had irqs enabled after return from cancel_delayed_work_sync(). Which is a
wrapper around __cancel_work_timer(). Which can sleep in the case where
something else is concurrently trying to cancel the same delayed work,
and as Thomas Gleixner pointed out on IRC, sleeping is a decidedly bad
idea when you are invoked from take_cpu_down(), regardless of the state
you leave interrupts in upon return.
Code inspection located no reason why the delayed work absolutely
needed to be canceled from sched_tick_stop(): The work is not
bound to the outgoing CPU by design, given that the whole point is
to collect statistics without disturbing the outgoing CPU.
This commit therefore simply drops the cancel_delayed_work_sync() from
sched_tick_stop(). Instead, a new ->state field is added to the tick_work
structure so that the delayed-work handler function sched_tick_remote()
can avoid reposting itself. A cpu_is_offline() check is also added to
sched_tick_remote() to avoid mucking with the state of an offlined CPU
(though it does appear safe to do so). The sched_tick_start() and
sched_tick_stop() functions also update ->state, and sched_tick_start()
also schedules the delayed work if ->state indicates that it is not
already in flight.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Apply Peter Zijlstra and Frederic Weisbecker atomics feedback. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190625165238.GJ26519@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The load_balance() has a dedicated mecanism to detect when an imbalance
is due to CPU affinity and must be handled at parent level. In this case,
the imbalance field of the parent's sched_group is set.
The description of sg_imbalanced() gives a typical example of two groups
of 4 CPUs each and 4 tasks each with a cpumask covering 1 CPU of the first
group and 3 CPUs of the second group. Something like:
{ 0 1 2 3 } { 4 5 6 7 }
* * * *
But the load_balance fails to fix this UC on my octo cores system
made of 2 clusters of quad cores.
Whereas the load_balance is able to detect that the imbalanced is due to
CPU affinity, it fails to fix it because the imbalance field is cleared
before letting parent level a chance to run. In fact, when the imbalance is
detected, the load_balance reruns without the CPU with pinned tasks. But
there is no other running tasks in the situation described above and
everything looks balanced this time so the imbalance field is immediately
cleared.
The imbalance field should not be cleared if there is no other task to move
when the imbalance is detected.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1561996022-28829-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We only need to set the callback_head worker function once, do it
during sched_fork().
While at it, move the comment regarding double task_work addition to
init_numa_balancing(), since the double add sentinel is first set there.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: mgorman@suse.de
Cc: riel@surriel.com
Link: https://lkml.kernel.org/r/20190715102508.32434-3-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To reference task_numa_work() from within init_numa_balancing(), we
need the former to be declared before the latter. Do just that.
This is a pure code movement.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: mgorman@suse.de
Cc: riel@surriel.com
Link: https://lkml.kernel.org/r/20190715102508.32434-2-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The old code used RCU annotations and accessors inconsistently for
->numa_group, which can lead to use-after-frees and NULL dereferences.
Let all accesses to ->numa_group use proper RCU helpers to prevent such
issues.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Fixes: 8c8a743c50 ("sched/numa: Use {cpu, pid} to create task groups for shared faults")
Link: https://lkml.kernel.org/r/20190716152047.14424-3-jannh@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When going through execve(), zero out the NUMA fault statistics instead of
freeing them.
During execve, the task is reachable through procfs and the scheduler. A
concurrent /proc/*/sched reader can read data from a freed ->numa_faults
allocation (confirmed by KASAN) and write it back to userspace.
I believe that it would also be possible for a use-after-free read to occur
through a race between a NUMA fault and execve(): task_numa_fault() can
lead to task_numa_compare(), which invokes task_weight() on the currently
running task of a different CPU.
Another way to fix this would be to make ->numa_faults RCU-managed or add
extra locking, but it seems easier to wipe the NUMA fault statistics on
execve.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Fixes: 82727018b0 ("sched/numa: Call task_numa_free() from do_execve()")
Link: https://lkml.kernel.org/r/20190716152047.14424-1-jannh@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- s390 support for KVM selftests
- LAPIC timer offloading to housekeeping CPUs
- Extend an s390 optimization for overcommitted hosts to all architectures
- Debugging cleanups and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdMr1FAAoJEL/70l94x66DvIkH/iVuUX9jO1NoQ7qhxeo04MnT
GP9mX3XnWoI/iN0zAIRfQSP2/9a6+KblgdiziABhju58j5dCfAZGb5793TQppweb
3ubl11vy7YkzaXJ0b35K7CFhOU9oSlHHGyi5Uh+yyje5qWNxwmHpizxjynbFTKb6
+/S7O2Ua1VrAVvx0i0IRtwanIK/jF4dStVButgVaVdUva3zLaQmeI71iaJl9ddXY
bh50xoYua5Ek6+ENi+nwCNVy4OF152AwDbXlxrU0QbeA1B888Qio7nIqb3bwwPpZ
/8wMVvPzQgL7RmgtY5E5Z4cCYuu7mK8wgGxhuk3oszlVwZJ5rmnaYwGEl4x1s7o=
=giag
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"Mostly bugfixes, but also:
- s390 support for KVM selftests
- LAPIC timer offloading to housekeeping CPUs
- Extend an s390 optimization for overcommitted hosts to all
architectures
- Debugging cleanups and improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: x86: Add fixed counters to PMU filter
KVM: nVMX: do not use dangling shadow VMCS after guest reset
KVM: VMX: dump VMCS on failed entry
KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed
KVM: s390: Use kvm_vcpu_wake_up in kvm_s390_vcpu_wakeup
KVM: Boost vCPUs that are delivering interrupts
KVM: selftests: Remove superfluous define from vmx.c
KVM: SVM: Fix detection of AMD Errata 1096
KVM: LAPIC: Inject timer interrupt via posted interrupt
KVM: LAPIC: Make lapic timer unpinned
KVM: x86/vPMU: reset pmc->counter to 0 for pmu fixed_counters
KVM: nVMX: Ignore segment base for VMX memory operand when segment not FS or GS
kvm: x86: ioapic and apic debug macros cleanup
kvm: x86: some tsc debug cleanup
kvm: vmx: fix coccinelle warnings
x86: kvm: avoid constant-conversion warning
x86: kvm: avoid -Wsometimes-uninitized warning
KVM: x86: expose AVX512_BF16 feature to guest
KVM: selftests: enable pgste option for the linker on s390
KVM: selftests: Move kvm_create_max_vcpus test to generic code
...
Dedicated instances are currently disturbed by unnecessary jitter due
to the emulated lapic timers firing on the same pCPUs where the
vCPUs reside. There is no hardware virtual timer on Intel for guest
like ARM, so both programming timer in guest and the emulated timer fires
incur vmexits. This patch tries to avoid vmexit when the emulated timer
fires, at least in dedicated instance scenario when nohz_full is enabled.
In that case, the emulated timers can be offload to the nearest busy
housekeeping cpus since APICv has been found for several years in server
processors. The guest timer interrupt can then be injected via posted interrupts,
which are delivered by the housekeeping cpu once the emulated timer fires.
The host should tuned so that vCPUs are placed on isolated physical
processors, and with several pCPUs surplus for busy housekeeping.
If disabled mwait/hlt/pause vmexits keep the vCPUs in non-root mode,
~3% redis performance benefit can be observed on Skylake server, and the
number of external interrupt vmexits drops substantially. Without patch
VM-EXIT Samples Samples% Time% Min Time Max Time Avg time
EXTERNAL_INTERRUPT 42916 49.43% 39.30% 0.47us 106.09us 0.71us ( +- 1.09% )
While with patch:
VM-EXIT Samples Samples% Time% Min Time Max Time Avg time
EXTERNAL_INTERRUPT 6871 9.29% 2.96% 0.44us 57.88us 0.72us ( +- 4.02% )
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
John reported a DEBUG_PREEMPT warning caused by commit:
aacedf26fb ("sched/core: Optimize try_to_wake_up() for local wakeups")
I overlooked that ttwu_stat() requires preemption disabled.
Reported-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: aacedf26fb ("sched/core: Optimize try_to_wake_up() for local wakeups")
Link: https://lkml.kernel.org/r/20190710105736.GK3402@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- A fair pile of RST conversions, many from Mauro. These create more
than the usual number of simple but annoying merge conflicts with other
trees, unfortunately. He has a lot more of these waiting on the wings
that, I think, will go to you directly later on.
- A new document on how to use merges and rebases in kernel repos, and one
on Spectre vulnerabilities.
- Various improvements to the build system, including automatic markup of
function() references because some people, for reasons I will never
understand, were of the opinion that :c:func:``function()`` is
unattractive and not fun to type.
- We now recommend using sphinx 1.7, but still support back to 1.4.
- Lots of smaller improvements, warning fixes, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl0krAEPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yg98H/AuLqO9LpOgUjF4LhyjxGPdzJkY9RExSJ7km
gznyreLCZgFaJR+AY6YDsd4Jw6OJlPbu1YM/Qo3C3WrZVFVhgL/s2ebvBgCo50A8
raAFd8jTf4/mGCHnAqRotAPQ3mETJUk315B66lBJ6Oc+YdpRhwXWq8ZW2bJxInFF
3HDvoFgMf0KhLuMHUkkL0u3fxH1iA+KvDu8diPbJYFjOdOWENz/CV8wqdVkXRSEW
DJxIq89h/7d+hIG3d1I7Nw+gibGsAdjSjKv4eRKauZs4Aoxd1Gpl62z0JNk6aT3m
dtq4joLdwScydonXROD/Twn2jsu4xYTrPwVzChomElMowW/ZBBY=
=D0eO
-----END PGP SIGNATURE-----
Merge tag 'docs-5.3' of git://git.lwn.net/linux
Pull Documentation updates from Jonathan Corbet:
"It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro. These create more
than the usual number of simple but annoying merge conflicts with
other trees, unfortunately. He has a lot more of these waiting on
the wings that, I think, will go to you directly later on.
- A new document on how to use merges and rebases in kernel repos,
and one on Spectre vulnerabilities.
- Various improvements to the build system, including automatic
markup of function() references because some people, for reasons I
will never understand, were of the opinion that
:c:func:``function()`` is unattractive and not fun to type.
- We now recommend using sphinx 1.7, but still support back to 1.4.
- Lots of smaller improvements, warning fixes, typo fixes, etc"
* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
docs: automarkup.py: ignore exceptions when seeking for xrefs
docs: Move binderfs to admin-guide
Disable Sphinx SmartyPants in HTML output
doc: RCU callback locks need only _bh, not necessarily _irq
docs: format kernel-parameters -- as code
Doc : doc-guide : Fix a typo
platform: x86: get rid of a non-existent document
Add the RCU docs to the core-api manual
Documentation: RCU: Add TOC tree hooks
Documentation: RCU: Rename txt files to rst
Documentation: RCU: Convert RCU UP systems to reST
Documentation: RCU: Convert RCU linked list to reST
Documentation: RCU: Convert RCU basic concepts to reST
docs: filesystems: Remove uneeded .rst extension on toctables
scripts/sphinx-pre-install: fix out-of-tree build
docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
Documentation: PGP: update for newer HW devices
Documentation: Add section about CPU vulnerabilities for Spectre
Documentation: platform: Delete x86-laptop-drivers.txt
docs: Note that :c:func: should no longer be used
...
Pull scheduler updates from Ingo Molnar:
- Remove the unused per rq load array and all its infrastructure, by
Dietmar Eggemann.
- Add utilization clamping support by Patrick Bellasi. This is a
refinement of the energy aware scheduling framework with support for
boosting of interactive and capping of background workloads: to make
sure critical GUI threads get maximum frequency ASAP, and to make
sure background processing doesn't unnecessarily move to cpufreq
governor to higher frequencies and less energy efficient CPU modes.
- Add the bare minimum of tracepoints required for LISA EAS regression
testing, by Qais Yousef - which allows automated testing of various
power management features, including energy aware scheduling.
- Restructure the former tsk_nr_cpus_allowed() facility that the -rt
kernel used to modify the scheduler's CPU affinity logic such as
migrate_disable() - introduce the task->cpus_ptr value instead of
taking the address of &task->cpus_allowed directly - by Sebastian
Andrzej Siewior.
- Misc optimizations, fixes, cleanups and small enhancements - see the
Git log for details.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
sched/uclamp: Add uclamp support to energy_compute()
sched/uclamp: Add uclamp_util_with()
sched/cpufreq, sched/uclamp: Add clamps for FAIR and RT tasks
sched/uclamp: Set default clamps for RT tasks
sched/uclamp: Reset uclamp values on RESET_ON_FORK
sched/uclamp: Extend sched_setattr() to support utilization clamping
sched/core: Allow sched_setattr() to use the current policy
sched/uclamp: Add system default clamps
sched/uclamp: Enforce last task's UCLAMP_MAX
sched/uclamp: Add bucket local max tracking
sched/uclamp: Add CPU's clamp buckets refcounting
sched/fair: Rename weighted_cpuload() to cpu_runnable_load()
sched/debug: Export the newly added tracepoints
sched/debug: Add sched_overutilized tracepoint
sched/debug: Add new tracepoint to track PELT at se level
sched/debug: Add new tracepoints to track PELT at rq level
sched/debug: Add a new sched_trace_*() helper functions
sched/autogroup: Make autogroup_path() always available
sched/wait: Deduplicate code with do-while
sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity()
...
Pull locking updates from Ingo Molnar:
"The main changes in this cycle are:
- rwsem scalability improvements, phase #2, by Waiman Long, which are
rather impressive:
"On a 2-socket 40-core 80-thread Skylake system with 40 reader
and writer locking threads, the min/mean/max locking operations
done in a 5-second testing window before the patchset were:
40 readers, Iterations Min/Mean/Max = 1,807/1,808/1,810
40 writers, Iterations Min/Mean/Max = 1,807/50,344/151,255
After the patchset, they became:
40 readers, Iterations Min/Mean/Max = 30,057/31,359/32,741
40 writers, Iterations Min/Mean/Max = 94,466/95,845/97,098"
There's a lot of changes to the locking implementation that makes
it similar to qrwlock, including owner handoff for more fair
locking.
Another microbenchmark shows how across the spectrum the
improvements are:
"With a locking microbenchmark running on 5.1 based kernel, the
total locking rates (in kops/s) on a 2-socket Skylake system
with equal numbers of readers and writers (mixed) before and
after this patchset were:
# of Threads Before Patch After Patch
------------ ------------ -----------
2 2,618 4,193
4 1,202 3,726
8 802 3,622
16 729 3,359
32 319 2,826
64 102 2,744"
The changes are extensive and the patch-set has been through
several iterations addressing various locking workloads. There
might be more regressions, but unless they are pathological I
believe we want to use this new implementation as the baseline
going forward.
- jump-label optimizations by Daniel Bristot de Oliveira: the primary
motivation was to remove IPI disturbance of isolated RT-workload
CPUs, which resulted in the implementation of batched jump-label
updates. Beyond the improvement of the real-time characteristics
kernel, in one test this patchset improved static key update
overhead from 57 msecs to just 1.4 msecs - which is a nice speedup
as well.
- atomic64_t cross-arch type cleanups by Mark Rutland: over the last
~10 years of atomic64_t existence the various types used by the
APIs only had to be self-consistent within each architecture -
which means they became wildly inconsistent across architectures.
Mark puts and end to this by reworking all the atomic64
implementations to use 's64' as the base type for atomic64_t, and
to ensure that this type is consistently used for parameters and
return values in the API, avoiding further problems in this area.
- A large set of small improvements to lockdep by Yuyang Du: type
cleanups, output cleanups, function return type and othr cleanups
all around the place.
- A set of percpu ops cleanups and fixes by Peter Zijlstra.
- Misc other changes - please see the Git log for more details"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (82 commits)
locking/lockdep: increase size of counters for lockdep statistics
locking/atomics: Use sed(1) instead of non-standard head(1) option
locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING
x86/jump_label: Make tp_vec_nr static
x86/percpu: Optimize raw_cpu_xchg()
x86/percpu, sched/fair: Avoid local_clock()
x86/percpu, x86/irq: Relax {set,get}_irq_regs()
x86/percpu: Relax smp_processor_id()
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
locking/rwsem: Guard against making count negative
locking/rwsem: Adaptive disabling of reader optimistic spinning
locking/rwsem: Enable time-based spinning on reader-owned rwsem
locking/rwsem: Make rwsem->owner an atomic_long_t
locking/rwsem: Enable readers spinning on writer
locking/rwsem: Clarify usage of owner's nonspinaable bit
locking/rwsem: Wake up almost all readers in wait queue
locking/rwsem: More optimal RT task handling of null owner
locking/rwsem: Always release wait_lock before waking up tasks
locking/rwsem: Implement lock handoff to prevent lock starvation
locking/rwsem: Make rwsem_spin_on_owner() return owner state
...
The Energy Aware Scheduler (EAS) estimates the energy impact of waking
up a task on a given CPU. This estimation is based on:
a) an (active) power consumption defined for each CPU frequency
b) an estimation of which frequency will be used on each CPU
c) an estimation of the busy time (utilization) of each CPU
Utilization clamping can affect both b) and c).
A CPU is expected to run:
- on an higher than required frequency, but for a shorter time, in case
its estimated utilization will be smaller than the minimum utilization
enforced by uclamp
- on a smaller than required frequency, but for a longer time, in case
its estimated utilization is bigger than the maximum utilization
enforced by uclamp
While compute_energy() already accounts clamping effects on busy time,
the clamping effects on frequency selection are currently ignored.
Fix it by considering how CPU clamp values will be affected by a
task waking up and being RUNNABLE on that CPU.
Do that by refactoring schedutil_freq_util() to take an additional
task_struct* which allows EAS to evaluate the impact on clamp values of
a task being eventually queued in a CPU. Clamp values are applied to the
RT+CFS utilization only when a FREQUENCY_UTIL is required by
compute_energy().
Do note that switching from ENERGY_UTIL to FREQUENCY_UTIL in the
computation of the cpu_util signal implies that we are more likely to
estimate the highest OPP when a RT task is running in another CPU of
the same performance domain. This can have an impact on energy
estimation but:
- it's not easy to say which approach is better, since it depends on
the use case
- the original approach could still be obtained by setting a smaller
task-specific util_min whenever required
Since we are at that:
- rename schedutil_freq_util() into schedutil_cpu_util(),
since it's not only used for frequency selection.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-12-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So far uclamp_util() allows to clamp a specified utilization considering
the clamp values requested by RUNNABLE tasks in a CPU. For the Energy
Aware Scheduler (EAS) it is interesting to test how clamp values will
change when a task is becoming RUNNABLE on a given CPU.
For example, EAS is interested in comparing the energy impact of
different scheduling decisions and the clamp values can play a role on
that.
Add uclamp_util_with() which allows to clamp a given utilization by
considering the possible impact on CPU clamp values of a specified task.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-11-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Each time a frequency update is required via schedutil, a frequency is
selected to (possibly) satisfy the utilization reported by each
scheduling class and irqs. However, when utilization clamping is in use,
the frequency selection should consider userspace utilization clamping
hints. This will allow, for example, to:
- boost tasks which are directly affecting the user experience
by running them at least at a minimum "requested" frequency
- cap low priority tasks not directly affecting the user experience
by running them only up to a maximum "allowed" frequency
These constraints are meant to support a per-task based tuning of the
frequency selection thus supporting a fine grained definition of
performance boosting vs energy saving strategies in kernel space.
Add support to clamp the utilization of RUNNABLE FAIR and RT tasks
within the boundaries defined by their aggregated utilization clamp
constraints.
Do that by considering the max(min_util, max_util) to give boosted tasks
the performance they need even when they happen to be co-scheduled with
other capped tasks.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-10-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
By default FAIR tasks start without clamps, i.e. neither boosted nor
capped, and they run at the best frequency matching their utilization
demand. This default behavior does not fit RT tasks which instead are
expected to run at the maximum available frequency, if not otherwise
required by explicitly capping them.
Enforce the correct behavior for RT tasks by setting util_min to max
whenever:
1. the task is switched to the RT class and it does not already have a
user-defined clamp value assigned.
2. an RT task is forked from a parent with RESET_ON_FORK set.
NOTE: utilization clamp values are cross scheduling class attributes and
thus they are never changed/reset once a value has been explicitly
defined from user-space.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-9-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A forked tasks gets the same clamp values of its parent however, when
the RESET_ON_FORK flag is set on parent, e.g. via:
sys_sched_setattr()
sched_setattr()
__sched_setscheduler(attr::SCHED_FLAG_RESET_ON_FORK)
the new forked task is expected to start with all attributes reset to
default values.
Do that for utilization clamp values too by checking the reset request
from the existing uclamp_fork() call which already provides the required
initialization for other uclamp related bits.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-8-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The SCHED_DEADLINE scheduling class provides an advanced and formal
model to define tasks requirements that can translate into proper
decisions for both task placements and frequencies selections. Other
classes have a more simplified model based on the POSIX concept of
priorities.
Such a simple priority based model however does not allow to exploit
most advanced features of the Linux scheduler like, for example, driving
frequencies selection via the schedutil cpufreq governor. However, also
for non SCHED_DEADLINE tasks, it's still interesting to define tasks
properties to support scheduler decisions.
Utilization clamping exposes to user-space a new set of per-task
attributes the scheduler can use as hints about the expected/required
utilization for a task. This allows to implement a "proactive" per-task
frequency control policy, a more advanced policy than the current one
based just on "passive" measured task utilization. For example, it's
possible to boost interactive tasks (e.g. to get better performance) or
cap background tasks (e.g. to be more energy/thermal efficient).
Introduce a new API to set utilization clamping values for a specified
task by extending sched_setattr(), a syscall which already allows to
define task specific properties for different scheduling classes. A new
pair of attributes allows to specify a minimum and maximum utilization
the scheduler can consider for a task.
Do that by validating the required clamp values before and then applying
the required changes using _the_ same pattern already in use for
__setscheduler(). This ensures that the task is re-enqueued with the new
clamp values.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-7-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The sched_setattr() syscall mandates that a policy is always specified.
This requires to always know which policy a task will have when
attributes are configured and this makes it impossible to add more
generic task attributes valid across different scheduling policies.
Reading the policy before setting generic tasks attributes is racy since
we cannot be sure it is not changed concurrently.
Introduce the required support to change generic task attributes without
affecting the current task policy. This is done by adding an attribute flag
(SCHED_FLAG_KEEP_POLICY) to enforce the usage of the current policy.
Add support for the SETPARAM_POLICY policy, which is already used by the
sched_setparam() POSIX syscall, to the sched_setattr() non-POSIX
syscall.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-6-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tasks without a user-defined clamp value are considered not clamped
and by default their utilization can have any value in the
[0..SCHED_CAPACITY_SCALE] range.
Tasks with a user-defined clamp value are allowed to request any value
in that range, and the required clamp is unconditionally enforced.
However, a "System Management Software" could be interested in limiting
the range of clamp values allowed for all tasks.
Add a privileged interface to define a system default configuration via:
/proc/sys/kernel/sched_uclamp_util_{min,max}
which works as an unconditional clamp range restriction for all tasks.
With the default configuration, the full SCHED_CAPACITY_SCALE range of
values is allowed for each clamp index. Otherwise, the task-specific
clamp is capped by the corresponding system default value.
Do that by tracking, for each task, the "effective" clamp value and
bucket the task has been refcounted in at enqueue time. This
allows to lazy aggregate "requested" and "system default" values at
enqueue time and simplifies refcounting updates at dequeue time.
The cached bucket ids are used to avoid (relatively) more expensive
integer divisions every time a task is enqueued.
An active flag is used to report when the "effective" value is valid and
thus the task is actually refcounted in the corresponding rq's bucket.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-5-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a task sleeps it removes its max utilization clamp from its CPU.
However, the blocked utilization on that CPU can be higher than the max
clamp value enforced while the task was running. This allows undesired
CPU frequency increases while a CPU is idle, for example, when another
CPU on the same frequency domain triggers a frequency update, since
schedutil can now see the full not clamped blocked utilization of the
idle CPU.
Fix this by using:
uclamp_rq_dec_id(p, rq, UCLAMP_MAX)
uclamp_rq_max_value(rq, UCLAMP_MAX, clamp_value)
to detect when a CPU has no more RUNNABLE clamped tasks and to flag this
condition.
Don't track any minimum utilization clamps since an idle CPU never
requires a minimum frequency. The decay of the blocked utilization is
good enough to reduce the CPU frequency.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-4-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Because of bucketization, different task-specific clamp values are
tracked in the same bucket. For example, with 20% bucket size and
assuming to have:
Task1: util_min=25%
Task2: util_min=35%
both tasks will be refcounted in the [20..39]% bucket and always boosted
only up to 20% thus implementing a simple floor aggregation normally
used in histograms.
In systems with only few and well-defined clamp values, it would be
useful to track the exact clamp value required by a task whenever
possible. For example, if a system requires only 23% and 47% boost
values then it's possible to track the exact boost required by each
task using only 3 buckets of ~33% size each.
Introduce a mechanism to max aggregate the requested clamp values of
RUNNABLE tasks in the same bucket. Keep it simple by resetting the
bucket value to its base value only when a bucket becomes inactive.
Allow a limited and controlled overboosting margin for tasks recounted
in the same bucket.
In systems where the boost values are not known in advance, it is still
possible to control the maximum acceptable overboosting margin by tuning
the number of clamp groups. For example, 20 groups ensure a 5% maximum
overboost.
Remove the rq bucket initialization code since a correct bucket value
is now computed when a task is refcounted into a CPU's rq.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-3-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Utilization clamping allows to clamp the CPU's utilization within a
[util_min, util_max] range, depending on the set of RUNNABLE tasks on
that CPU. Each task references two "clamp buckets" defining its minimum
and maximum (util_{min,max}) utilization "clamp values". A CPU's clamp
bucket is active if there is at least one RUNNABLE tasks enqueued on
that CPU and refcounting that bucket.
When a task is {en,de}queued {on,from} a rq, the set of active clamp
buckets on that CPU can change. If the set of active clamp buckets
changes for a CPU a new "aggregated" clamp value is computed for that
CPU. This is because each clamp bucket enforces a different utilization
clamp value.
Clamp values are always MAX aggregated for both util_min and util_max.
This ensures that no task can affect the performance of other
co-scheduled tasks which are more boosted (i.e. with higher util_min
clamp) or less capped (i.e. with higher util_max clamp).
A task has:
task_struct::uclamp[clamp_id]::bucket_id
to track the "bucket index" of the CPU's clamp bucket it refcounts while
enqueued, for each clamp index (clamp_id).
A runqueue has:
rq::uclamp[clamp_id]::bucket[bucket_id].tasks
to track how many RUNNABLE tasks on that CPU refcount each
clamp bucket (bucket_id) of a clamp index (clamp_id).
It also has a:
rq::uclamp[clamp_id]::bucket[bucket_id].value
to track the clamp value of each clamp bucket (bucket_id) of a clamp
index (clamp_id).
The rq::uclamp::bucket[clamp_id][] array is scanned every time it's
needed to find a new MAX aggregated clamp value for a clamp_id. This
operation is required only when it's dequeued the last task of a clamp
bucket tracking the current MAX aggregated clamp value. In this case,
the CPU is either entering IDLE or going to schedule a less boosted or
more clamped task.
The expected number of different clamp values configured at build time
is small enough to fit the full unordered array into a single cache
line, for configurations of up to 7 buckets.
Add to struct rq the basic data structures required to refcount the
number of RUNNABLE tasks for each clamp bucket. Add also the max
aggregation required to update the rq's clamp value at each
enqueue/dequeue event.
Use a simple linear mapping of clamp values into clamp buckets.
Pre-compute and cache bucket_id to avoid integer divisions at
enqueue/dequeue time.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-2-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The term 'weighted' is not needed since there is no 'unweighted' load.
Instead use the term 'runnable' to distinguish 'runnable' load
(avg.runnable_load_avg) used in load balance from load (avg.load_avg)
which is the sum of 'runnable' and 'blocked' load.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/57f27a7f-2775-d832-e965-0f4d51bb1954@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So that external modules can hook into them and extract the info they
need. Since these new tracepoints have no events associated with them
exporting these tracepoints make them useful for external modules to
perform testing and debugging. There's no other way otherwise to access
them.
BPF doesn't have infrastructure to access these bare tracepoints either.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-7-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The new tracepoint allows us to track the changes in overutilized
status.
Overutilized status is associated with EAS. It indicates that the system
is in high performance state. EAS is disabled when the system is in this
state since there's not much energy savings while high performance tasks
are pushing the system to the limit and it's better to default to the
spreading behavior of the scheduler.
This tracepoint helps understanding and debugging the conditions under
which this happens.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-6-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The new functions allow modules to access internal data structures of
unexported struct cfs_rq and struct rq to extract important information
from the tracepoints to be introduced in later patches.
While at it fix alphabetical order of struct declarations in sched.h
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-3-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remove the #ifdef CONFIG_SCHED_DEBUG.
Some of the tracepoints to be introduced in later patches need to access
this function. Hence make it always available since the tracepoints are
not protected by CONFIG_SCHED_DEBUG.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-2-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Statements in the loop's body and before it are identical.
Use do-while to not repeat it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/43ffea6ee2152b90dedf962eac851609e4197218.1560256112.git.asml.silence@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nadav reported that code-gen changed because of the this_cpu_*()
constraints, avoid this for select_idle_cpu() because that runs with
preemption (and IRQs) disabled anyway.
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a cfs_rq sleeps and returns its quota, we delay for 5ms before
waking any throttled cfs_rqs to coalesce with other cfs_rqs going to
sleep, as this has to be done outside of the rq lock we hold.
The current code waits for 5ms without any sleeps, instead of waiting
for 5ms from the first sleep, which can delay the unthrottle more than
we want. Switch this around so that we can't push this forward forever.
This requires an extra flag rather than using hrtimer_active, since we
need to start a new timer if the current one is in the process of
finishing.
Signed-off-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Xunlei Pang <xlpang@linux.alibaba.com>
Acked-by: Phil Auld <pauld@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/xm26a7euy6iq.fsf_-_@bsegall-linux.svl.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jens reported that significant performance can be had on some block
workloads by special casing local wakeups. That is, wakeups on the
current task before it schedules out.
Given something like the normal wait pattern:
for (;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
if (cond)
break;
schedule();
}
__set_current_state(TASK_RUNNING);
Any wakeup (on this CPU) after set_current_state() and before
schedule() would benefit from this.
Normal wakeups take p->pi_lock, which serializes wakeups to the same
task. By eliding that we gain concurrency on:
- ttwu_stat(); we already had concurrency on rq stats, this now also
brings it to task stats. -ENOCARE
- tracepoints; it is now possible to get multiple instances of
trace_sched_waking() (and possibly trace_sched_wakeup()) for the
same task. Tracers will have to learn to cope.
Furthermore, p->pi_lock is used by set_special_state(), to order
against TASK_RUNNING stores from other CPUs. But since this is
strictly CPU local, we don't need the lock, and set_special_state()'s
disabling of IRQs is sufficient.
After the normal wakeup takes p->pi_lock it issues
smp_mb__after_spinlock(), in order to ensure the woken task must
observe prior stores before we observe the p->state. If this is CPU
local, this will be satisfied with a compiler barrier, and we rely on
try_to_wake_up() being a funcation call, which implies such.
Since, when 'p == current', 'p->on_rq' must be true, the normal wakeup
would continue into the ttwu_remote() branch, which normally is
concerned with exactly this wakeup scenario, except from a remote CPU.
IOW we're waking a task that is still running. In this case, we can
trivially avoid taking rq->lock, all that's left from this is to set
p->state.
This then yields an extremely simple and fast path for 'p == current'.
Reported-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: gkohli@codeaurora.org
Cc: hch@lst.de
Cc: oleg@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
runnable_avg_yN_inv[] is only used in kernel/sched/pelt.c but was
included in several other places because they need other macros all
came from kernel/sched/sched-pelt.h which was generated by
Documentation/scheduler/sched-pelt. As the result, it causes compilation
a lot of warnings,
kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=]
kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=]
kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=]
...
Silence it by appending the __maybe_unused attribute for it, so all
generated variables and macros can still be kept in the same file.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1559596304-31581-1-git-send-email-cai@lca.pw
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cfs_rq_has_blocked() and others_have_blocked() are only used within
update_blocked_averages(). The !CONFIG_FAIR_GROUP_SCHED version of the
latter calls them within a #define CONFIG_NO_HZ_COMMON block, whereas
the CONFIG_FAIR_GROUP_SCHED one calls them unconditionnally.
As reported by Qian, the above leads to this warning in
!CONFIG_NO_HZ_COMMON configs:
kernel/sched/fair.c: In function 'update_blocked_averages':
kernel/sched/fair.c:7750:7: warning: variable 'done' set but not used [-Wunused-but-set-variable]
It wouldn't be wrong to keep cfs_rq_has_blocked() and
others_have_blocked() as they are, but since their only current use is
to figure out when we can stop calling update_blocked_averages() on
fully decayed NOHZ idle CPUs, we can give them a new definition for
!CONFIG_NO_HZ_COMMON.
Change the definition of cfs_rq_has_blocked() and
others_have_blocked() for !CONFIG_NO_HZ_COMMON so that the
NOHZ-specific blocks of update_blocked_averages() become no-ops and
the 'done' variable gets optimised out.
While at it, remove the CONFIG_NO_HZ_COMMON block from the
!CONFIG_FAIR_GROUP_SCHED definition of update_blocked_averages() by
using the newly-introduced update_blocked_load_status() helper.
No change in functionality intended.
[ Additions by Peter Zijlstra. ]
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190603115424.7951-1-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Non-inline io_schedule() was introduced in:
commit 10ab56434f ("sched/core: Separate out io_schedule_prepare() and io_schedule_finish()")
Keep in line with io_schedule_timeout(), otherwise "/proc/<pid>/wchan" will
report io_schedule() rather than its callers when waiting for IO.
Reported-by: Jilong Kou <koujilong@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 10ab56434f ("sched/core: Separate out io_schedule_prepare() and io_schedule_finish()")
Link: https://lkml.kernel.org/r/20190603091338.2695-1-gaoxiang25@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In order to prepare to add them to the Kernel API book,
convert the files to ReST format.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since sg_lb_stats::sum_weighted_load is now identical with
sg_lb_stats::group_load remove it and replace its use case
(calculating load per task) with the latter.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20190527062116.11512-7-dietmar.eggemann@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts:
commit 201c373e8e ("sched/debug: Limit sd->*_idx range on sysctl")
Load indexes (sd->*_idx) are no longer needed without rq->cpu_load[].
The range check for load indexes can be removed as well. Get rid of it
before the rq->cpu_load[] since it uses CPU_LOAD_IDX_MAX.
At the same time, fix the following coding style issues detected by
scripts/checkpatch.pl:
ERROR: space prohibited before that ','
ERROR: space prohibited before that close parenthesis ')'
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20190527062116.11512-4-dietmar.eggemann@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With LB_BIAS disabled, source_load() & target_load() return
weighted_cpuload(). Replace both with calls to weighted_cpuload().
The function to obtain the load index (sd->*_idx) for an sd,
get_sd_load_idx(), can be removed as well.
Finally, get rid of the sched feature LB_BIAS.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20190527062116.11512-3-dietmar.eggemann@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With LB_BIAS disabled, there is no need to update the rq->cpu_load[idx]
any more.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20190527062116.11512-2-dietmar.eggemann@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The CFS class is the only one maintaining and using the CPU wide load
(rq->load(.weight)). The last use case of the CPU wide load in CFS's
set_next_entity() can be replaced by using the load of the CFS class
(rq->cfs.load(.weight)) instead.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190424084556.604-1-dietmar.eggemann@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In commit:
4b53a3412d ("sched/core: Remove the tsk_nr_cpus_allowed() wrapper")
the tsk_nr_cpus_allowed() wrapper was removed. There was not
much difference in !RT but in RT we used this to implement
migrate_disable(). Within a migrate_disable() section the CPU mask is
restricted to single CPU while the "normal" CPU mask remains untouched.
As an alternative implementation Ingo suggested to use:
struct task_struct {
const cpumask_t *cpus_ptr;
cpumask_t cpus_mask;
};
with
t->cpus_ptr = &t->cpus_mask;
In -RT we then can switch the cpus_ptr to:
t->cpus_ptr = &cpumask_of(task_cpu(p));
in a migration disabled region. The rules are simple:
- Code that 'uses' ->cpus_allowed would use the pointer.
- Code that 'modifies' ->cpus_allowed would use the direct mask.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190423142636.14347-1-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pressure metrics are already recorded and exposed in procfs for the
entire system, but any tool which monitors cgroup pressure has to
special case the root cgroup to read from procfs. This patch exposes
the already recorded pressure metrics on the root cgroup.
Link: http://lkml.kernel.org/r/20190510174938.3361741-1-dschatzberg@fb.com
Signed-off-by: Dan Schatzberg <dschatzberg@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Psi monitor aims to provide a low-latency short-term pressure detection
mechanism configurable by users. It allows users to monitor psi metrics
growth and trigger events whenever a metric raises above user-defined
threshold within user-defined time window.
Time window and threshold are both expressed in usecs. Multiple psi
resources with different thresholds and window sizes can be monitored
concurrently.
Psi monitors activate when system enters stall state for the monitored
psi metric and deactivate upon exit from the stall state. While system
is in the stall state psi signal growth is monitored at a rate of 10
times per tracking window. Min window size is 500ms, therefore the min
monitoring interval is 50ms. Max window size is 10s with monitoring
interval of 1s.
When activated psi monitor stays active for at least the duration of one
tracking window to avoid repeated activations/deactivations when psi
signal is bouncing.
Notifications to the users are rate-limited to one per tracking window.
Link: http://lkml.kernel.org/r/20190319235619.260832-8-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce changed_states parameter into collect_percpu_times to track
the states changed since the last update.
This will be needed to detect whether polled states activated in the
monitor patch.
Link: http://lkml.kernel.org/r/20190319235619.260832-6-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename psi_group structure member fields used for calculating psi totals
and averages for clear distinction between them and for trigger-related
fields that will be added by "psi: introduce psi monitor".
[surenb@google.com: v6]
Link: http://lkml.kernel.org/r/20190319235619.260832-4-surenb@google.com
Link: http://lkml.kernel.org/r/20190124211518.244221-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
psi_enable is not used outside of psi.c, make it static.
Link: http://lkml.kernel.org/r/20190319235619.260832-3-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "psi: pressure stall monitors", v6.
This is a respin of:
https://lwn.net/ml/linux-kernel/20190308184311.144521-1-surenb%40google.com/
Android is adopting psi to detect and remedy memory pressure that
results in stuttering and decreased responsiveness on mobile devices.
Psi gives us the stall information, but because we're dealing with
latencies in the millisecond range, periodically reading the pressure
files to detect stalls in a timely fashion is not feasible. Psi also
doesn't aggregate its averages at a high-enough frequency right now.
This patch series extends the psi interface such that users can
configure sensitive latency thresholds and use poll() and friends to be
notified when these are breached.
As high-frequency aggregation is costly, it implements an aggregation
method that is optimized for fast, short-interval averaging, and makes
the aggregation frequency adaptive, such that high-frequency updates
only happen while monitored stall events are actively occurring.
With these patches applied, Android can monitor for, and ward off,
mounting memory shortages before they cause problems for the user. For
example, using memory stall monitors in userspace low memory killer
daemon (lmkd) we can detect mounting pressure and kill less important
processes before device becomes visibly sluggish. In our memory stress
testing psi memory monitors produce roughly 10x less false positives
compared to vmpressure signals. Having ability to specify multiple
triggers for the same psi metric allows other parts of Android framework
to monitor memory state of the device and act accordingly.
The new interface is straight-forward. The user opens one of the
pressure files for writing and writes a trigger description into the
file descriptor that defines the stall state - some or full, and the
maximum stall time over a given window of time. E.g.:
/* Signal when stall time exceeds 100ms of a 1s window */
char trigger[] = "full 100000 1000000"
fd = open("/proc/pressure/memory")
write(fd, trigger, sizeof(trigger))
while (poll() >= 0) {
...
};
close(fd);
When the monitored stall state is entered, psi adapts its aggregation
frequency according to what the configured time window requires in order
to emit event signals in a timely fashion. Once the stalling subsides,
aggregation reverts back to normal.
The trigger is associated with the open file descriptor. To stop
monitoring, the user only needs to close the file descriptor and the
trigger is discarded.
Patches 1-6 prepare the psi code for polling support. Patch 7
implements the adaptive polling logic, the pressure growth detection
optimized for short intervals, and hooks up write() and poll() on the
pressure files.
The patches were developed in collaboration with Johannes Weiner.
This patch (of 7):
The psi monitoring patches will need to determine the same states as
record_times(). To avoid calculating them twice, maintain a state mask
that can be consulted cheaply. Do this in a separate patch to keep the
churn in the main feature patch at a minimum.
This adds 4-byte state_mask member into psi_group_cpu struct which
results in its first cacheline-aligned part becoming 52 bytes long. Add
explicit values to enumeration element counters that affect
psi_group_cpu struct size.
Link: http://lkml.kernel.org/r/20190124211518.244221-4-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the "big" set of driver core patches for 5.2-rc1
There are a number of ACPI patches in here as well, as Rafael said they
should go through this tree due to the driver core changes they
required. They have all been acked by the ACPI developers.
There are also a number of small subsystem-specific changes in here, due
to some changes to the kobject core code. Those too have all been acked
by the various subsystem maintainers.
As for content, it's pretty boring outside of the ACPI changes:
- spdx cleanups
- kobject documentation updates
- default attribute groups for kobjects
- other minor kobject/driver core fixes
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHDbw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynDAgCfbb4LBR6I50wFXb8JM/R6cAS7qrsAn1unshKV
8XCYcif2RxjtdJWXbjdm
=/rLh
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core/kobject updates from Greg KH:
"Here is the "big" set of driver core patches for 5.2-rc1
There are a number of ACPI patches in here as well, as Rafael said
they should go through this tree due to the driver core changes they
required. They have all been acked by the ACPI developers.
There are also a number of small subsystem-specific changes in here,
due to some changes to the kobject core code. Those too have all been
acked by the various subsystem maintainers.
As for content, it's pretty boring outside of the ACPI changes:
- spdx cleanups
- kobject documentation updates
- default attribute groups for kobjects
- other minor kobject/driver core fixes
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits)
kobject: clean up the kobject add documentation a bit more
kobject: Fix kernel-doc comment first line
kobject: Remove docstring reference to kset
firmware_loader: Fix a typo ("syfs" -> "sysfs")
kobject: fix dereference before null check on kobj
Revert "driver core: platform: Fix the usage of platform device name(pdev->name)"
init/config: Do not select BUILD_BIN2C for IKCONFIG
Provide in-kernel headers to make extending kernel easier
kobject: Improve doc clarity kobject_init_and_add()
kobject: Improve docs for kobject_add/del
driver core: platform: Fix the usage of platform device name(pdev->name)
livepatch: Replace klp_ktype_patch's default_attrs with groups
cpufreq: schedutil: Replace default_attrs field with groups
padata: Replace padata_attr_type default_attrs field with groups
irqdesc: Replace irq_kobj_type's default_attrs field with groups
net-sysfs: Replace ktype default_attrs field with groups
block: Replace all ktype default_attrs with groups
samples/kobject: Replace foo_ktype's default_attrs field with groups
kobject: Add support for default attribute groups to kobj_type
driver core: Postpone DMA tear-down until after devres release for probe failure
...
- Fix the handling of Performance and Energy Bias Hint (EPB) on
Intel processors and expose it to user space via sysfs to avoid
having to access it through the generic MSR I/F (Rafael Wysocki).
- Improve the handling of global turbo changes made by the platform
firmware in the intel_pstate driver (Rafael Wysocki).
- Convert some slow-path static_cpu_has() callers to boot_cpu_has()
in cpufreq (Borislav Petkov).
- Fix the frequency calculation loop in the armada-37xx cpufreq
driver (Gregory CLEMENT).
- Fix possible object reference leaks in multuple cpufreq drivers
(Wen Yang).
- Fix kerneldoc comment in the centrino cpufreq driver (dongjian).
- Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan
Kumar).
- Add support for lx2160a and ls1028a to the qoriq cpufreq driver
(Vabhav Sharma, Yuantian Tang).
- Fix kobject memory leak in the cpufreq core (Viresh Kumar).
- Simplify the IOwait boosting in the schedutil cpufreq governor
and rework the TSC cpufreq notifier on x86 (Rafael Wysocki).
- Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin).
- Improve the cpufreq documentation, add SPDX license tags to
some PM documentation files and unify copyright notices in
them (Rafael Wysocki).
- Add support for "CPU" domains to the generic power domains (genpd)
framework and provide low-level PSCI firmware support for that
feature (Ulf Hansson).
- Rearrange the PSCI firmware support code and add support for
SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla).
- Improve genpd support for devices in multiple power domains (Ulf
Hansson).
- Unify target residency for the AFTR and coupled AFTR states in the
exynos cpuidle driver (Marek Szyprowski).
- Introduce new helper routine in the operating performance points
(OPP) framework (Andrew-sh.Cheng).
- Add support for passing on-die termination (ODT) and auto power
down parameters from the kernel to Trusted Firmware-A (TF-A) to
the rk3399_dmc devfreq driver (Enric Balletbo i Serra).
- Add tracing to devfreq (Lukasz Luba).
- Make the exynos-bus devfreq driver suspend all devices on system
shutdown (Marek Szyprowski).
- Fix a few minor issues in the devfreq subsystem and clean it up
somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring,
Saravana Kannan, Yangtao Li).
- Improve system wakeup diagnostics (Stephen Boyd).
- Rework filesystem sync messages emitted during system suspend and
hibernation (Harry Pan).
-----BEGIN PGP SIGNATURE-----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=nY9p
-----END PGP SIGNATURE-----
Merge tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These fix the (Intel-specific) Performance and Energy Bias Hint (EPB)
handling and expose it to user space via sysfs, fix and clean up
several cpufreq drivers, add support for two new chips to the qoriq
cpufreq driver, fix, simplify and clean up the cpufreq core and the
schedutil governor, add support for "CPU" domains to the generic power
domains (genpd) framework and provide low-level PSCI firmware support
for that feature, fix the exynos cpuidle driver and fix a couple of
issues in the devfreq subsystem and clean it up.
Specifics:
- Fix the handling of Performance and Energy Bias Hint (EPB) on Intel
processors and expose it to user space via sysfs to avoid having to
access it through the generic MSR I/F (Rafael Wysocki).
- Improve the handling of global turbo changes made by the platform
firmware in the intel_pstate driver (Rafael Wysocki).
- Convert some slow-path static_cpu_has() callers to boot_cpu_has()
in cpufreq (Borislav Petkov).
- Fix the frequency calculation loop in the armada-37xx cpufreq
driver (Gregory CLEMENT).
- Fix possible object reference leaks in multuple cpufreq drivers
(Wen Yang).
- Fix kerneldoc comment in the centrino cpufreq driver (dongjian).
- Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan
Kumar).
- Add support for lx2160a and ls1028a to the qoriq cpufreq driver
(Vabhav Sharma, Yuantian Tang).
- Fix kobject memory leak in the cpufreq core (Viresh Kumar).
- Simplify the IOwait boosting in the schedutil cpufreq governor and
rework the TSC cpufreq notifier on x86 (Rafael Wysocki).
- Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin).
- Improve the cpufreq documentation, add SPDX license tags to some PM
documentation files and unify copyright notices in them (Rafael
Wysocki).
- Add support for "CPU" domains to the generic power domains (genpd)
framework and provide low-level PSCI firmware support for that
feature (Ulf Hansson).
- Rearrange the PSCI firmware support code and add support for
SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla).
- Improve genpd support for devices in multiple power domains (Ulf
Hansson).
- Unify target residency for the AFTR and coupled AFTR states in the
exynos cpuidle driver (Marek Szyprowski).
- Introduce new helper routine in the operating performance points
(OPP) framework (Andrew-sh.Cheng).
- Add support for passing on-die termination (ODT) and auto power
down parameters from the kernel to Trusted Firmware-A (TF-A) to the
rk3399_dmc devfreq driver (Enric Balletbo i Serra).
- Add tracing to devfreq (Lukasz Luba).
- Make the exynos-bus devfreq driver suspend all devices on system
shutdown (Marek Szyprowski).
- Fix a few minor issues in the devfreq subsystem and clean it up
somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring,
Saravana Kannan, Yangtao Li).
- Improve system wakeup diagnostics (Stephen Boyd).
- Rework filesystem sync messages emitted during system suspend and
hibernation (Harry Pan)"
* tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
cpufreq: Fix kobject memleak
cpufreq: armada-37xx: fix frequency calculation for opp
cpufreq: centrino: Fix centrino_setpolicy() kerneldoc comment
cpufreq: qoriq: add support for lx2160a
x86: tsc: Rework time_cpufreq_notifier()
PM / Domains: Allow to attach a CPU via genpd_dev_pm_attach_by_id|name()
PM / Domains: Search for the CPU device outside the genpd lock
PM / Domains: Drop unused in-parameter to some genpd functions
PM / Domains: Use the base device for driver_deferred_probe_check_state()
cpufreq: qoriq: Add ls1028a chip support
PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain
PM / Domains: Allow OF lookup for multi PM domain case from ->attach_dev()
PM / Domains: Don't kfree() the virtual device in the error path
cpufreq: Move ->get callback check outside of __cpufreq_get()
PM / Domains: remove unnecessary unlikely()
cpufreq: Remove needless bios_limit check in show_bios_limit()
drivers/cpufreq/acpi-cpufreq.c: This fixes the following checkpatch warning
firmware/psci: add support for SYSTEM_RESET2
PM / devfreq: add tracing for scheduling work
trace: events: add devfreq trace event file
...
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Make nohz housekeeping processing more permissive and less
intrusive to isolated CPUs
- Decouple CPU-bound workqueue acconting from the scheduler and move
it into the workqueue code.
- Optimize topology building
- Better handle quota and period overflows
- Add more RCU annotations
- Comment updates, misc cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
nohz_full: Allow the boot CPU to be nohz_full
sched/isolation: Require a present CPU in housekeeping mask
kernel/cpu: Allow non-zero CPU to be primary for suspend / kexec freeze
power/suspend: Add function to disable secondaries for suspend
sched/core: Allow the remote scheduler tick to be started on CPU0
sched/nohz: Run NOHZ idle load balancer on HK_FLAG_MISC CPUs
sched/debug: Fix spelling mistake "logaritmic" -> "logarithmic"
sched/topology: Update init_sched_domains() comment
cgroup/cpuset: Update stale generate_sched_domains() comments
sched/core: Check quota and period overflow at usec to nsec conversion
sched/core: Handle overflow in cpu_shares_write_u64
sched/rt: Check integer overflow at usec to nsec conversion
sched/core: Fix typo in comment
sched/core: Make some functions static
sched/core: Unify p->on_rq updates
sched/core: Remove ttwu_activate()
sched/core, workqueues: Distangle worker accounting from rq lock
sched/fair: Remove unneeded prototype of capacity_of()
sched/topology: Skip duplicate group rewrites in build_sched_groups()
sched/topology: Fix build_sched_groups() comment
...
Pull unified TLB flushing from Ingo Molnar:
"This contains the generic mmu_gather feature from Peter Zijlstra,
which is an all-arch unification of TLB flushing APIs, via the
following (broad) steps:
- enhance the <asm-generic/tlb.h> APIs to cover more arch details
- convert most TLB flushing arch implementations to the generic
<asm-generic/tlb.h> APIs.
- remove leftovers of per arch implementations
After this series every single architecture makes use of the unified
TLB flushing APIs"
* 'core-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm/resource: Use resource_overlaps() to simplify region_intersects()
ia64/tlb: Eradicate tlb_migrate_finish() callback
asm-generic/tlb: Remove tlb_table_flush()
asm-generic/tlb: Remove tlb_flush_mmu_free()
asm-generic/tlb: Remove CONFIG_HAVE_GENERIC_MMU_GATHER
asm-generic/tlb: Remove arch_tlb*_mmu()
s390/tlb: Convert to generic mmu_gather
asm-generic/tlb: Introduce CONFIG_HAVE_MMU_GATHER_NO_GATHER=y
arch/tlb: Clean up simple architectures
um/tlb: Convert to generic mmu_gather
sh/tlb: Convert SH to generic mmu_gather
ia64/tlb: Convert to generic mmu_gather
arm/tlb: Convert to generic mmu_gather
asm-generic/tlb, arch: Invert CONFIG_HAVE_RCU_TABLE_INVALIDATE
asm-generic/tlb, ia64: Conditionally provide tlb_migrate_finish()
asm-generic/tlb: Provide generic tlb_flush() based on flush_tlb_mm()
asm-generic/tlb, arch: Provide generic tlb_flush() based on flush_tlb_range()
asm-generic/tlb, arch: Provide generic VIPT cache flush
asm-generic/tlb, arch: Provide CONFIG_HAVE_MMU_GATHER_PAGE_SIZE
asm-generic/tlb: Provide a comment
During housekeeping mask setup, currently a possible CPU is required.
That does not guarantee the CPU would be available at boot time, so
check to ensure that at least one present CPU is in the mask.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lkml.kernel.org/r/20190411033448.20842-5-npiggin@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This has no effect yet because CPU0 will always be a housekeeping CPU
until a later change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lkml.kernel.org/r/20190411033448.20842-2-npiggin@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently the error return path from kobject_init_and_add() is not
followed by a call to kobject_put() - which means we are leaking
the kobject.
Fix it by adding a call to kobject_put() in the error path of
kobject_init_and_add().
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tobin C. Harding <tobin@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: http://lkml.kernel.org/r/20190430001144.24890-1-tobin@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The NOHZ idle balancer runs on the lowest idle CPU. This can
interfere with isolated CPUs, so confine it to HK_FLAG_MISC
housekeeping CPUs.
HK_FLAG_SCHED is not used for this because it is not set anywhere
at the moment. This could be folded into HK_FLAG_SCHED once that
option is fixed.
The problem was observed with increased jitter on an application
running on CPU0, caused by NOHZ idle load balancing being run on
CPU1 (an SMT sibling).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190412042613.28930-1-npiggin@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The kobj_type default_attrs field is being replaced by the
default_groups field. Replace sugov_tunables_ktype's default_attrs field
with default groups. Change "sugov_attributes" to "sugov_attrs" and use
the ATTRIBUTE_GROUPS macro to create sugov_groups.
This patch was tested by setting the scaling governor to schedutil and
verifying that the sysfs files for the attributes in the default groups
were created.
Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sched_clock_cpu() may not be consistent between CPUs. If a task
migrates to another CPU, then se.exec_start is set to that CPU's
rq_clock_task() by update_stats_curr_start(). Specifically, the new
value might be before the old value due to clock skew.
So then if in numa_get_avg_runtime() the expression:
'now - p->last_task_numa_placement'
ends up as -1, then the divider '*period + 1' in task_numa_placement()
is 0 and things go bang. Similar to update_curr(), check if time goes
backwards to avoid this.
[ peterz: Wrote new changelog. ]
[ mingo: Tweaked the code comment. ]
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: cj.chengjian@huawei.com
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20190425080016.GX11158@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Large values could overflow u64 and pass following sanity checks.
# echo 18446744073750000 > cpu.cfs_period_us
# cat cpu.cfs_period_us
40448
# echo 18446744073750000 > cpu.cfs_quota_us
# cat cpu.cfs_quota_us
40448
After this patch they will fail with -EINVAL.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/155125502079.293431.3947497929372138600.stgit@buzz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bit shift in scale_load() could overflow shares. This patch saturates
it to MAX_SHARES like following sched_group_set_shares().
Example:
# echo 9223372036854776832 > cpu.shares
# cat cpu.shares
Before patch: 1024
After pattch: 262144
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/155125501891.293431.3345233332801109696.stgit@buzz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix these sparse warnings:
kernel/sched/core.c:6577:11: warning: symbol 'min_cfs_quota_period' was not declared. Should it be static?
kernel/sched/core.c:6657:5: warning: symbol 'tg_set_cfs_quota' was not declared. Should it be static?
kernel/sched/core.c:6670:6: warning: symbol 'tg_get_cfs_quota' was not declared. Should it be static?
kernel/sched/core.c:6683:5: warning: symbol 'tg_set_cfs_period' was not declared. Should it be static?
kernel/sched/core.c:6693:6: warning: symbol 'tg_get_cfs_period' was not declared. Should it be static?
kernel/sched/fair.c:2596:6: warning: symbol 'task_tick_numa' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20190418144713.34332-1-yuehaibing@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Almost all {,de}activate_task() invocations pair with p->on_rq
updates, the exception being the usage in rt/deadline which hold both
rq locks and therefore don't strictly need to set
TASK_ON_RQ_MIGRATING, but it is harmless if we do anyway.
Put the updates in {,de}activate_task() and cut down on repetition.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After the removal of try_to_wake_up_local(), there is only one user of
ttwu_activate() left, and since it is a trivial function, remove it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The worker accounting for CPU bound workers is plugged into the core
scheduler code and the wakeup code. This is not a hard requirement and
can be avoided by keeping track of the state in the workqueue code
itself.
Keep track of the sleeping state in the worker itself and call the
notifier before entering the core scheduler. There might be false
positives when the task is woken between that call and actually
scheduling, but that's not really different from scheduling and being
woken immediately after switching away. When nr_running is updated when
the task is retunrning from schedule() then it is later compared when it
is done from ttwu().
[ bigeasy: preempt_disable() around wq_worker_sleeping() by Daniel Bristot de Oliveira ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/ad2b29b5715f970bffc1a7026cabd6ff0b24076a.1532952814.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
syzbot reported the following warning:
[ ] WARNING: CPU: 4 PID: 17089 at kernel/sched/deadline.c:255 task_non_contending+0xae0/0x1950
line 255 of deadline.c is:
WARN_ON(hrtimer_active(&dl_se->inactive_timer));
in task_non_contending().
Unfortunately, in some cases (for example, a deadline task
continuosly blocking and waking immediately) it can happen that
a task blocks (and task_non_contending() is called) while the
0-lag timer is still active.
In this case, the safest thing to do is to immediately decrease
the running bandwidth of the task, without trying to re-arm the 0-lag timer.
Signed-off-by: luca abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: chengjian (D) <cj.chengjian@huawei.com>
Link: https://lkml.kernel.org/r/20190325131530.34706-1-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With extremely short cfs_period_us setting on a parent task group with a large
number of children the for loop in sched_cfs_period_timer() can run until the
watchdog fires. There is no guarantee that the call to hrtimer_forward_now()
will ever return 0. The large number of children can make
do_sched_cfs_period_timer() take longer than the period.
NMI watchdog: Watchdog detected hard LOCKUP on cpu 24
RIP: 0010:tg_nop+0x0/0x10
<IRQ>
walk_tg_tree_from+0x29/0xb0
unthrottle_cfs_rq+0xe0/0x1a0
distribute_cfs_runtime+0xd3/0xf0
sched_cfs_period_timer+0xcb/0x160
? sched_cfs_slack_timer+0xd0/0xd0
__hrtimer_run_queues+0xfb/0x270
hrtimer_interrupt+0x122/0x270
smp_apic_timer_interrupt+0x6a/0x140
apic_timer_interrupt+0xf/0x20
</IRQ>
To prevent this we add protection to the loop that detects when the loop has run
too many times and scales the period and quota up, proportionally, so that the timer
can complete before then next period expires. This preserves the relative runtime
quota while preventing the hard lockup.
A warning is issued reporting this state and the new values.
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190319130005.25492-1-pauld@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The prototype of that function was already hoisted up in:
commit 3b1baa6496 ("sched/fair: Add 'group_misfit_task' load-balance type")
but that seems to have been missed. Get rid of the extra prototype.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Quentin Perret <quentin.perret@arm.com>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: morten.rasmussen@arm.com
Fixes: 2802bf3cd9 ("sched/fair: Add over-utilization/tipping point indicator")
Link: http://lkml.kernel.org/r/20190416140621.19884-1-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While staring at build_sched_domains(), I realized that get_group()
does several duplicate (thus useless) writes.
If you take the Arm Juno r0 (LITTLEs = [0, 3, 4, 5], bigs = [1, 2]), the
sched_group build flow would look like this:
('MC[cpu]->sg' means 'per_cpu_ptr(&tl->data->sg, cpu)' with 'tl == MC')
build_sched_groups(MC[CPU0]->sd, CPU0)
get_group(0) -> MC[CPU0]->sg
get_group(3) -> MC[CPU3]->sg
get_group(4) -> MC[CPU4]->sg
get_group(5) -> MC[CPU5]->sg
build_sched_groups(DIE[CPU0]->sd, CPU0)
get_group(0) -> DIE[CPU0]->sg
get_group(1) -> DIE[CPU1]->sg <=================+
|
build_sched_groups(MC[CPU1]->sd, CPU1) |
get_group(1) -> MC[CPU1]->sg |
get_group(2) -> MC[CPU2]->sg |
|
build_sched_groups(DIE[CPU1]->sd, CPU1) ^
get_group(1) -> DIE[CPU1]->sg } We've set up these two up here!
get_group(3) -> DIE[CPU0]->sg }
From this point on, we will only use sched_groups that have been
previously visited & initialized. The only new operation will
be which group pointer we affect to sd->groups.
On the Juno r0 we get 32 get_group() calls, every single one of them
writing to a sched_group->cpumask. However, all of the data structures
we need are set up after 8 visits (see above).
Return early from get_group() if we've already visited (and thus
initialized) the sched_group we're looking at. Overlapping domains
are not affected as they do not use build_sched_groups().
Tested on a Juno and a 2 * (Xeon E5-2690) system.
( FWIW I initially checked the refs for both sg && sg->sgc, but figured if
they weren't both 0 or > 1 then something must have gone wrong, so I
threw in a WARN_ON(). )
No change in functionality intended.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The comment was introduced (pre 2.6.12) by:
8a7a2318dc07 ("[PATCH] sched: consolidate sched domains")
and referred to sched_group->cpu_power. This was folded into
sched_group->sched_group_power in
commit 9c3f75cbd1 ("sched: Break out cpu_power from the sched_group structure")
The comment was then updated in:
ced549fa5f ("sched: Remove remaining dubious usage of "power"")
but should have replaced "sg->cpu_capacity" with
"sg->sched_group_capacity". Do that now.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: morten.rasmussen@arm.com
Cc: qais.yousef@arm.com
Link: http://lkml.kernel.org/r/20190409173546.4747-3-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is not reason for the minimum iowait boost value in the
schedutil cpufreq governor to depend on the available range of CPU
frequencies. In fact, that dependency is generally confusing,
because it causes the iowait boost to behave somewhat differently
on CPUs with the same maximum frequency and different minimum
frequencies, for example.
For this reason, replace the min field in struct sugov_cpu
with a constant and choose its values to be 1/8 of
SCHED_CAPACITY_SCALE (for consistency with the intel_pstate
driver's internal governor).
[Note that policy->cpuinfo.max_freq will not be a constant any more
after a subsequent change, so this change is depended on by it.]
Link: https://lore.kernel.org/lkml/20190305083202.GU32494@hirez.programming.kicks-ass.net/T/#ee20bdc98b7d89f6110c0d00e5c3ee8c2ced93c3d
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Fix these sparse warnigs:
kernel/sched/fair.c:3570:6: warning: symbol 'sync_entity_load_avg' was not declared. Should it be static?
kernel/sched/fair.c:3583:6: warning: symbol 'remove_entity_load_avg' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190320133839.21392-1-yuehaibing@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This fixes the following sparse errors in sched/fair.c:
fair.c:6506:14: error: incompatible types in comparison expression
fair.c:8642:21: error: incompatible types in comparison expression
Using __rcu will also help sparse catch any future bugs.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[ From an RCU perspective. ]
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Cc: kernel-hardening@lists.openwall.com
Cc: kernel-team@android.com
Link: https://lkml.kernel.org/r/20190321003426.160260-5-joel@joelfernandes.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Recently I added an RCU annotation check to rcu_assign_pointer(). All
pointers assigned to RCU protected data are to be annotated with __rcu
inorder to be able to use rcu_assign_pointer() similar to checks in
other RCU APIs.
This resulted in a sparse error:
kernel//sched/cpufreq.c:41:9: sparse: error: incompatible types in comparison expression (different address spaces)
Fix this by annotating cpufreq_update_util_data pointer with __rcu. This
will also help sparse catch any future RCU misuage bugs.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
[ From an RCU perspective. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Cc: kernel-hardening@lists.openwall.com
Cc: kernel-team@android.com
Link: https://lkml.kernel.org/r/20190321003426.160260-2-joel@joelfernandes.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Only ia64-sn2 uses this as an optimization, and there it is of
questionable correctness due to the mm_users==1 test.
Remove it entirely.
No change in behavior intended.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A NULL pointer dereference bug was reported on a distribution kernel but
the same issue should be present on mainline kernel. It occured on s390
but should not be arch-specific. A partial oops looks like:
Unable to handle kernel pointer dereference in virtual kernel address space
...
Call Trace:
...
try_to_wake_up+0xfc/0x450
vhost_poll_wakeup+0x3a/0x50 [vhost]
__wake_up_common+0xbc/0x178
__wake_up_common_lock+0x9e/0x160
__wake_up_sync_key+0x4e/0x60
sock_def_readable+0x5e/0x98
The bug hits any time between 1 hour to 3 days. The dereference occurs
in update_cfs_rq_h_load when accumulating h_load. The problem is that
cfq_rq->h_load_next is not protected by any locking and can be updated
by parallel calls to task_h_load. Depending on the compiler, code may be
generated that re-reads cfq_rq->h_load_next after the check for NULL and
then oops when reading se->avg.load_avg. The dissassembly showed that it
was possible to reread h_load_next after the check for NULL.
While this does not appear to be an issue for later compilers, it's still
an accident if the correct code is generated. Full locking in this path
would have high overhead so this patch uses READ_ONCE to read h_load_next
only once and check for NULL before dereferencing. It was confirmed that
there were no further oops after 10 days of testing.
As Peter pointed out, it is also necessary to use WRITE_ONCE() to avoid any
potential problems with store tearing.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Fixes: 685207963b ("sched: Move h_load calculation to task_h_load()")
Link: https://lkml.kernel.org/r/20190319123610.nsivgf3mjbjjesxb@techsingularity.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull scheduler updates from Thomas Gleixner:
"Third more careful attempt for this set of fixes:
- Prevent a 32bit math overflow in the cpufreq code
- Fix a buffer overflow when scanning the cgroup2 cpu.max property
- A set of fixes for the NOHZ scheduler logic to prevent waking up
CPUs even if the capacity of the busy CPUs is sufficient along with
other tweaks optimizing the behaviour for asymmetric systems
(big/little)"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Skip LLC NOHZ logic for asymmetric systems
sched/fair: Tune down misfit NOHZ kicks
sched/fair: Comment some nohz_balancer_kick() kick conditions
sched/core: Fix buffer overflow in cgroup2 property cpu.max
sched/cpufreq: Fix 32-bit math overflow
The LLC NOHZ condition will become true as soon as >=2 CPUs in a
single LLC domain are busy. On big.LITTLE systems, this translates to
two or more CPUs of a "cluster" (big or LITTLE) being busy.
Issuing a NOHZ kick in these conditions isn't desired for asymmetric
systems, as if the busy CPUs can provide enough compute capacity to
the running tasks, then we can leave the NOHZ CPUs in peace.
Skip the LLC NOHZ condition for asymmetric systems, and rely on
nr_running & capacity checks to trigger NOHZ kicks when the system
actually needs them.
Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dietmar.Eggemann@arm.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/20190211175946.4961-4-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In this commit:
3b1baa6496 ("sched/fair: Add 'group_misfit_task' load-balance type")
we set rq->misfit_task_load whenever the current running task has a
utilization greater than 80% of rq->cpu_capacity. A non-zero value in
this field enables misfit load balancing.
However, if the task being looked at is already running on a CPU of
highest capacity, there's nothing more we can do for it. We can
currently spot this in update_sd_pick_busiest(), which prevents us
from selecting a sched_group of group_type == group_misfit_task as the
busiest group, but we don't do any of that in nohz_balancer_kick().
This means that we could repeatedly kick NOHZ CPUs when there's no
improvements in terms of load balance to be done.
Introduce a check_misfit_status() helper that returns true iff there
is a CPU in the system that could give more CPU capacity to a rq's
misfit task - IOW, there exists a CPU of higher capacity_orig or the
rq's CPU is severely pressured by rt/IRQ.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dietmar.Eggemann@arm.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: morten.rasmussen@arm.com
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/20190211175946.4961-3-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We now have a comment explaining the first sched_domain based NOHZ kick,
so might as well comment them all.
While at it, unwrap a line that fits under 80 characters.
Co-authored-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dietmar.Eggemann@arm.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: morten.rasmussen@arm.com
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/20190211175946.4961-2-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vincent Wang reported that get_next_freq() has a mult overflow bug on
32-bit platforms in the IOWAIT boost case, since in that case {util,max}
are in freq units instead of capacity units.
Solve this by moving the IOWAIT boost to capacity units. And since this
means @max is constant; simplify the code.
Reported-by: Vincent Wang <vincent.wang@unisoc.com>
Tested-by: Vincent Wang <vincent.wang@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190305083202.GU32494@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge misc updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (159 commits)
tools/testing/selftests/proc/proc-self-syscall.c: remove duplicate include
proc: more robust bulk read test
proc: test /proc/*/maps, smaps, smaps_rollup, statm
proc: use seq_puts() everywhere
proc: read kernel cpu stat pointer once
proc: remove unused argument in proc_pid_lookup()
fs/proc/thread_self.c: code cleanup for proc_setup_thread_self()
fs/proc/self.c: code cleanup for proc_setup_self()
proc: return exit code 4 for skipped tests
mm,mremap: bail out earlier in mremap_to under map pressure
mm/sparse: fix a bad comparison
mm/memory.c: do_fault: avoid usage of stale vm_area_struct
writeback: fix inode cgroup switching comment
mm/huge_memory.c: fix "orig_pud" set but not used
mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC
mm/memcontrol.c: fix bad line in comment
mm/cma.c: cma_declare_contiguous: correct err handling
mm/page_ext.c: fix an imbalance with kmemleak
mm/compaction: pass pgdat to too_many_isolated() instead of zone
mm: remove zone_lru_lock() function, access ->lru_lock directly
...
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- refcount conversions
- Solve the rq->leaf_cfs_rq_list can of worms for real.
- improve power-aware scheduling
- add sysctl knob for Energy Aware Scheduling
- documentation updates
- misc other changes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
kthread: Do not use TIMER_IRQSAFE
kthread: Convert worker lock to raw spinlock
sched/fair: Use non-atomic cpumask_{set,clear}_cpu()
sched/fair: Remove unused 'sd' parameter from select_idle_smt()
sched/wait: Use freezable_schedule() when possible
sched/fair: Prune, fix and simplify the nohz_balancer_kick() comment block
sched/fair: Explain LLC nohz kick condition
sched/fair: Simplify nohz_balancer_kick()
sched/topology: Fix percpu data types in struct sd_data & struct s_data
sched/fair: Simplify post_init_entity_util_avg() by calling it with a task_struct pointer argument
sched/fair: Fix O(nr_cgroups) in the load balancing path
sched/fair: Optimize update_blocked_averages()
sched/fair: Fix insertion in rq->leaf_cfs_rq_list
sched/fair: Add tmp_alone_branch assertion
sched/core: Use READ_ONCE()/WRITE_ONCE() in move_queued_task()/task_rq_lock()
sched/debug: Initialize sd_sysctl_cpus if !CONFIG_CPUMASK_OFFSTACK
sched/pelt: Skip updating util_est when utilization is higher than CPU's capacity
sched/fair: Update scale invariance of PELT
sched/fair: Move the rq_of() helper function
sched/core: Convert task_struct.stack_refcount to refcount_t
...
Pull locking updates from Ingo Molnar:
"The biggest part of this tree is the new auto-generated atomics API
wrappers by Mark Rutland.
The primary motivation was to allow instrumentation without uglifying
the primary source code.
The linecount increase comes from adding the auto-generated files to
the Git space as well:
include/asm-generic/atomic-instrumented.h | 1689 ++++++++++++++++--
include/asm-generic/atomic-long.h | 1174 ++++++++++---
include/linux/atomic-fallback.h | 2295 +++++++++++++++++++++++++
include/linux/atomic.h | 1241 +------------
I preferred this approach, so that the full call stack of the (already
complex) locking APIs is still fully visible in 'git grep'.
But if this is excessive we could certainly hide them.
There's a separate build-time mechanism to determine whether the
headers are out of date (they should never be stale if we do our job
right).
Anyway, nothing from this should be visible to regular kernel
developers.
Other changes:
- Add support for dynamic keys, which removes a source of false
positives in the workqueue code, among other things (Bart Van
Assche)
- Updates to tools/memory-model (Andrea Parri, Paul E. McKenney)
- qspinlock, wake_q and lockdep micro-optimizations (Waiman Long)
- misc other updates and enhancements"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
locking/lockdep: Shrink struct lock_class_key
locking/lockdep: Add module_param to enable consistency checks
lockdep/lib/tests: Test dynamic key registration
lockdep/lib/tests: Fix run_tests.sh
kernel/workqueue: Use dynamic lockdep keys for workqueues
locking/lockdep: Add support for dynamic keys
locking/lockdep: Verify whether lock objects are small enough to be used as class keys
locking/lockdep: Check data structure consistency
locking/lockdep: Reuse lock chains that have been freed
locking/lockdep: Fix a comment in add_chain_cache()
locking/lockdep: Introduce lockdep_next_lockchain() and lock_chain_count()
locking/lockdep: Reuse list entries that are no longer in use
locking/lockdep: Free lock classes that are no longer in use
locking/lockdep: Update two outdated comments
locking/lockdep: Make it easy to detect whether or not inside a selftest
locking/lockdep: Split lockdep_free_key_range() and lockdep_reset_lock()
locking/lockdep: Initialize the locks_before and locks_after lists earlier
locking/lockdep: Make zap_class() remove all matching lock order entries
locking/lockdep: Reorder struct lock_class members
locking/lockdep: Avoid that add_chain_cache() adds an invalid chain to the cache
...
Compaction is inherently race-prone as a suitable page freed during
compaction can be allocated by any parallel task. This patch uses a
capture_control structure to isolate a page immediately when it is freed
by a direct compactor in the slow path of the page allocator. The
intent is to avoid redundant scanning.
5.0.0-rc1 5.0.0-rc1
selective-v3r17 capture-v3r19
Amean fault-both-1 0.00 ( 0.00%) 0.00 * 0.00%*
Amean fault-both-3 2582.11 ( 0.00%) 2563.68 ( 0.71%)
Amean fault-both-5 4500.26 ( 0.00%) 4233.52 ( 5.93%)
Amean fault-both-7 5819.53 ( 0.00%) 6333.65 ( -8.83%)
Amean fault-both-12 9321.18 ( 0.00%) 9759.38 ( -4.70%)
Amean fault-both-18 9782.76 ( 0.00%) 10338.76 ( -5.68%)
Amean fault-both-24 15272.81 ( 0.00%) 13379.55 * 12.40%*
Amean fault-both-30 15121.34 ( 0.00%) 16158.25 ( -6.86%)
Amean fault-both-32 18466.67 ( 0.00%) 18971.21 ( -2.73%)
Latency is only moderately affected but the devil is in the details. A
closer examination indicates that base page fault latency is reduced but
latency of huge pages is increased as it takes creater care to succeed.
Part of the "problem" is that allocation success rates are close to 100%
even when under pressure and compaction gets harder
5.0.0-rc1 5.0.0-rc1
selective-v3r17 capture-v3r19
Percentage huge-3 96.70 ( 0.00%) 98.23 ( 1.58%)
Percentage huge-5 96.99 ( 0.00%) 95.30 ( -1.75%)
Percentage huge-7 94.19 ( 0.00%) 97.24 ( 3.24%)
Percentage huge-12 94.95 ( 0.00%) 97.35 ( 2.53%)
Percentage huge-18 96.74 ( 0.00%) 97.30 ( 0.58%)
Percentage huge-24 97.07 ( 0.00%) 97.55 ( 0.50%)
Percentage huge-30 95.69 ( 0.00%) 98.50 ( 2.95%)
Percentage huge-32 96.70 ( 0.00%) 99.27 ( 2.65%)
And scan rates are reduced as expected by 6% for the migration scanner
and 29% for the free scanner indicating that there is less redundant
work.
Compaction migrate scanned 20815362 19573286
Compaction free scanned 16352612 11510663
[mgorman@techsingularity.net: remove redundant check]
Link: http://lkml.kernel.org/r/20190201143853.GH9565@techsingularity.net
Link: http://lkml.kernel.org/r/20190118175136.31341-23-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Replace all open encodings for NUMA_NO_NODE", v3.
All these places for replacement were found by running the following
grep patterns on the entire kernel code. Please let me know if this
might have missed some instances. This might also have replaced some
false positives. I will appreciate suggestions, inputs and review.
1. git grep "nid == -1"
2. git grep "node == -1"
3. git grep "nid = -1"
4. git grep "node = -1"
This patch (of 2):
At present there are multiple places where invalid node number is
encoded as -1. Even though implicitly understood it is always better to
have macros in there. Replace these open encodings for an invalid node
number with the global macro NUMA_NO_NODE. This helps remove NUMA
related assumptions like 'invalid node' from various places redirecting
them to a common definition.
Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ixgbe]
Acked-by: Jens Axboe <axboe@kernel.dk> [mtip32xx]
Acked-by: Vinod Koul <vkoul@kernel.org> [dmaengine.c]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Doug Ledford <dledford@redhat.com> [drivers/infiniband]
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull year 2038 updates from Thomas Gleixner:
"Another round of changes to make the kernel ready for 2038. After lots
of preparatory work this is the first set of syscalls which are 2038
safe:
403 clock_gettime64
404 clock_settime64
405 clock_adjtime64
406 clock_getres_time64
407 clock_nanosleep_time64
408 timer_gettime64
409 timer_settime64
410 timerfd_gettime64
411 timerfd_settime64
412 utimensat_time64
413 pselect6_time64
414 ppoll_time64
416 io_pgetevents_time64
417 recvmmsg_time64
418 mq_timedsend_time64
419 mq_timedreceiv_time64
420 semtimedop_time64
421 rt_sigtimedwait_time64
422 futex_time64
423 sched_rr_get_interval_time64
The syscall numbers are identical all over the architectures"
* 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
riscv: Use latest system call ABI
checksyscalls: fix up mq_timedreceive and stat exceptions
unicore32: Fix __ARCH_WANT_STAT64 definition
asm-generic: Make time32 syscall numbers optional
asm-generic: Drop getrlimit and setrlimit syscalls from default list
32-bit userspace ABI: introduce ARCH_32BIT_OFF_T config option
compat ABI: use non-compat openat and open_by_handle_at variants
y2038: add 64-bit time_t syscalls to all 32-bit architectures
y2038: rename old time and utime syscalls
y2038: remove struct definition redirects
y2038: use time32 syscall names on 32-bit
syscalls: remove obsolete __IGNORE_ macros
y2038: syscalls: rename y2038 compat syscalls
x86/x32: use time64 versions of sigtimedwait and recvmmsg
timex: change syscalls to use struct __kernel_timex
timex: use __kernel_timex internally
sparc64: add custom adjtimex/clock_adjtime functions
time: fix sys_timer_settime prototype
time: Add struct __kernel_timex
time: make adjtime compat handling available for 32 bit
...
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-03-04
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add AF_XDP support to libbpf. Rationale is to facilitate writing
AF_XDP applications by offering higher-level APIs that hide many
of the details of the AF_XDP uapi. Sample programs are converted
over to this new interface as well, from Magnus.
2) Introduce a new cant_sleep() macro for annotation of functions
that cannot sleep and use it in BPF_PROG_RUN() to assert that
BPF programs run under preemption disabled context, from Peter.
3) Introduce per BPF prog stats in order to monitor the usage
of BPF; this is controlled by kernel.bpf_stats_enabled sysctl
knob where monitoring tools can make use of this to efficiently
determine the average cost of programs, from Alexei.
4) Split up BPF selftest's test_progs similarly as we already
did with test_verifier. This allows to further reduce merge
conflicts in future and to get more structure into our
quickly growing BPF selftest suite, from Stanislav.
5) Fix a bug in BTF's dedup algorithm which can cause an infinite
loop in some circumstances; also various BPF doc fixes and
improvements, from Andrii.
6) Various BPF sample cleanups and migration to libbpf in order
to further isolate the old sample loader code (so we can get
rid of it at some point), from Jakub.
7) Add a new BPF helper for BPF cgroup skb progs that allows
to set ECN CE code point and a Host Bandwidth Manager (HBM)
sample program for limiting the bandwidth used by v2 cgroups,
from Lawrence.
8) Enable write access to skb->queue_mapping from tc BPF egress
programs in order to let BPF pick TX queue, from Jesper.
9) Fix a bug in BPF spinlock handling for map-in-map which did
not propagate spin_lock_off to the meta map, from Yonghong.
10) Fix a bug in the new per-CPU BPF prog counters to properly
initialize stats for each CPU, from Eric.
11) Add various BPF helper prototypes to selftest's bpf_helpers.h,
from Willem.
12) Fix various BPF samples bugs in XDP and tracing progs,
from Toke, Daniel and Yonghong.
13) Silence preemption splat in test_bpf after BPF_PROG_RUN()
enforces it now everywhere, from Anders.
14) Fix a signedness bug in libbpf's btf_dedup_ref_type() to
get error handling working, from Dan.
15) Fix bpftool documentation and auto-completion with regards
to stream_{verdict,parser} attach types, from Alban.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We've been seeing hard-to-trigger psi crashes when running inside VM
instances:
divide error: 0000 [#1] SMP PTI
Modules linked in: [...]
CPU: 0 PID: 212 Comm: kworker/0:2 Not tainted 4.16.18-119_fbk9_3817_gfe944c98d695 #119
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
Workqueue: events psi_clock
RIP: 0010:psi_update_stats+0x270/0x490
RSP: 0018:ffffc90001117e10 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8800a35a13f8
RDX: 0000000000000000 RSI: ffff8800a35a1340 RDI: 0000000000000000
RBP: 0000000000000658 R08: ffff8800a35a1470 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 00000000000f8502
FS: 0000000000000000(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fbe370fa000 CR3: 00000000b1e3a000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
psi_clock+0x12/0x50
process_one_work+0x1e0/0x390
worker_thread+0x2b/0x3c0
? rescuer_thread+0x330/0x330
kthread+0x113/0x130
? kthread_create_worker_on_cpu+0x40/0x40
? SyS_exit_group+0x10/0x10
ret_from_fork+0x35/0x40
Code: 48 0f 47 c7 48 01 c2 45 85 e4 48 89 16 0f 85 e6 00 00 00 4c 8b 49 10 4c 8b 51 08 49 69 d9 f2 07 00 00 48 6b c0 64 4c 8b 29 31 d2 <48> f7 f7 49 69 d5 8d 06 00 00 48 89 c5 4c 69 f0 00 98 0b 00 48
The Code-line points to `period` being 0 inside update_stats(), and we
divide by that when calculating that period's pressure percentage.
The elapsed period should never be 0. The reason this can happen is due
to an off-by-one in the idle time / missing period calculation combined
with a coarse sched_clock() in the virtual machine.
The target time for aggregation is advanced into the future on a fixed
grid to prevent clock drift. So when an aggregation runs after some idle
period, we can not just set it to "now + psi_period", but have to
calculate the downtime and advance the target time relative to itself.
However, if the aggregator was disabled exactly one psi_period (ns), we
drop one idle period in the calculation due to a > when we should do >=.
In that case, next_update will be advanced from 'now - psi_period' to
'now' when it should be moved to 'now + psi_period'. The run finishes
with last_update == next_update == sched_clock().
With hardware clocks, this exact nanosecond match isn't likely in the
first place; but if it does happen, the clock will still have moved on and
the period non-zero by the time the worker runs. A pointlessly short
period, but besides the extra work, no harm no foul. However, a slow
sched_clock() like we have on VMs might not have advanced either by the
time the worker runs again. And when we calculate the elapsed period, the
result, our pressure divisor, will be 0. Ouch.
Fix this by correctly handling the situation when the elapsed time between
aggregation runs is precisely two periods, and advance the expiration
timestamp correctly to period into the future.
Link: http://lkml.kernel.org/r/20190214193157.15788-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Łukasz Siudut <lsiudut@fb.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce cant_sleep() macro for annotation of functions that
cannot sleep.
Use it in BPF_PROG_RUN to catch execution of BPF programs in
preemptable context.
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull the latest RCU tree from Paul E. McKenney:
- Additional cleanups after RCU flavor consolidation
- Grace-period forward-progress cleanups and improvements
- Documentation updates
- Miscellaneous fixes
- spin_is_locked() conversions to lockdep
- SPDX changes to RCU source and header files
- SRCU updates
- Torture-test updates, including nolibc updates and moving
nolibc to tools/include
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The cpumasks updated here are not subject to concurrency and using
atomic bitops for them is pointless and expensive. Use the non-atomic
variants instead.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/2e2a10f84b9049a81eef94ed6d5989447c21e34a.1549963617.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 'sd' parameter isn't getting used in select_idle_smt(), drop it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/f91c5e118183e79d4a982e9ac4ce5e47948f6c1b.1549536337.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The comment block for that function lists the heuristics for
triggering a nohz kick, but the most recent ones (blocked load
updates, misfit) aren't included, and some of them (LLC nohz logic,
asym packing) are no longer in sync with the code.
The conditions are either simple enough or properly commented, so get
rid of that list instead of letting it grow.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: morten.rasmussen@arm.com
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/20190117153411.2390-4-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Calling 'nohz_balance_exit_idle(rq)' will always clear 'rq->cpu' from
'nohz.idle_cpus_mask' if it is set. Since it is called at the top of
'nohz_balancer_kick()', 'rq->cpu' will never be set in
'nohz.idle_cpus_mask' if it is accessed in the rest of the function.
Combine the 'sched_domain_span()' with 'nohz.idle_cpus_mask' and drop the
'(i == cpu)' check since 'rq->cpu' will never be iterated over.
While at it, clean up a condition alignment.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: morten.rasmussen@arm.com
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/20190117153411.2390-2-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The percpu members of struct sd_data and s_data are declared as:
struct ... ** __percpu member;
So their type is:
__percpu pointer to pointer to struct ...
But looking at how they're used, their type should be:
pointer to __percpu pointer to struct ...
and they should thus be declared as:
struct ... * __percpu *member;
So fix the placement of '__percpu' in the definition of these
structures.
This addresses a bunch of Sparse's warnings like:
warning: incorrect type in initializer (different address spaces)
expected void const [noderef] <asn:3> *__vpp_verify
got struct sched_domain **
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190118144936.79158-1-luc.vanoostenryck@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since commit:
d03266910a ("sched/fair: Fix task group initialization")
the utilization of a sched entity representing a task group is no longer
initialized to any other value than 0. So post_init_entity_util_avg() is
only used for tasks, not for sched_entities.
Make this clear by calling it with a task_struct pointer argument which
also eliminates the entity_is_task(se) if condition in the fork path and
get rid of the stale comment in remove_entity_load_avg() accordingly.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20190122162501.12000-1-dietmar.eggemann@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This re-applies the commit reverted here:
commit c40f7d74c7 ("sched/fair: Fix infinite loop in update_blocked_averages() by reverting a9e7f6544b9c")
I.e. now that cfs_rq can be safely removed/added in the list, we can re-apply:
commit a9e7f6544b ("sched/fair: Fix O(nr_cgroups) in load balance path")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: sargun@sargun.me
Cc: tj@kernel.org
Cc: xiexiuqi@huawei.com
Cc: xiezhipeng1@huawei.com
Link: https://lkml.kernel.org/r/1549469662-13614-3-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Removing a cfs_rq from rq->leaf_cfs_rq_list can break the parent/child
ordering of the list when it will be added back. In order to remove an
empty and fully decayed cfs_rq, we must remove its children too, so they
will be added back in the right order next time.
With a normal decay of PELT, a parent will be empty and fully decayed
if all children are empty and fully decayed too. In such a case, we just
have to ensure that the whole branch will be added when a new task is
enqueued. This is default behavior since :
commit f678331973 ("sched/fair: Fix insertion in rq->leaf_cfs_rq_list")
In case of throttling, the PELT of throttled cfs_rq will not be updated
whereas the parent will. This breaks the assumption made above unless we
remove the children of a cfs_rq that is throttled. Then, they will be
added back when unthrottled and a sched_entity will be enqueued.
As throttled cfs_rq are now removed from the list, we can remove the
associated test in update_blocked_averages().
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: sargun@sargun.me
Cc: tj@kernel.org
Cc: xiexiuqi@huawei.com
Cc: xiezhipeng1@huawei.com
Link: https://lkml.kernel.org/r/1549469662-13614-2-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This series finally gets us to the point of having system calls with
64-bit time_t on all architectures, after a long time of incremental
preparation patches.
There was actually one conversion that I missed during the summer,
i.e. Deepa's timex series, which I now updated based the 5.0-rc1 changes
and review comments.
The following system calls are now added on all 32-bit architectures
using the same system call numbers:
403 clock_gettime64
404 clock_settime64
405 clock_adjtime64
406 clock_getres_time64
407 clock_nanosleep_time64
408 timer_gettime64
409 timer_settime64
410 timerfd_gettime64
411 timerfd_settime64
412 utimensat_time64
413 pselect6_time64
414 ppoll_time64
416 io_pgetevents_time64
417 recvmmsg_time64
418 mq_timedsend_time64
419 mq_timedreceiv_time64
420 semtimedop_time64
421 rt_sigtimedwait_time64
422 futex_time64
423 sched_rr_get_interval_time64
Each one of these corresponds directly to an existing system call
that includes a 'struct timespec' argument, or a structure containing
a timespec or (in case of clock_adjtime) timeval. Not included here
are new versions of getitimer/setitimer and getrusage/waitid, which
are planned for the future but only needed to make a consistent API
rather than for correct operation beyond y2038. These four system
calls are based on 'timeval', and it has not been finally decided
what the replacement kernel interface will use instead.
So far, I have done a lot of build testing across most architectures,
which has found a number of bugs. Runtime testing so far included
testing LTP on 32-bit ARM with the existing system calls, to ensure
we do not regress for existing binaries, and a test with a 32-bit
x86 build of LTP against a modified version of the musl C library
that has been adapted to the new system call interface [3].
This library can be used for testing on all architectures supported
by musl-1.1.21, but it is not how the support is getting integrated
into the official musl release. Official musl support is planned
but will require more invasive changes to the library.
Link: https://lore.kernel.org/lkml/20190110162435.309262-1-arnd@arndb.de/T/
Link: https://lore.kernel.org/lkml/20190118161835.2259170-1-arnd@arndb.de/
Link: https://git.linaro.org/people/arnd/musl-y2038.git/ [2]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=IZVb
-----END PGP SIGNATURE-----
Merge tag 'y2038-new-syscalls' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into timers/2038
Pull y2038 - time64 system calls from Arnd Bergmann:
This series finally gets us to the point of having system calls with 64-bit
time_t on all architectures, after a long time of incremental preparation
patches.
There was actually one conversion that I missed during the summer,
i.e. Deepa's timex series, which I now updated based the 5.0-rc1 changes
and review comments.
The following system calls are now added on all 32-bit architectures using
the same system call numbers:
403 clock_gettime64
404 clock_settime64
405 clock_adjtime64
406 clock_getres_time64
407 clock_nanosleep_time64
408 timer_gettime64
409 timer_settime64
410 timerfd_gettime64
411 timerfd_settime64
412 utimensat_time64
413 pselect6_time64
414 ppoll_time64
416 io_pgetevents_time64
417 recvmmsg_time64
418 mq_timedsend_time64
419 mq_timedreceiv_time64
420 semtimedop_time64
421 rt_sigtimedwait_time64
422 futex_time64
423 sched_rr_get_interval_time64
Each one of these corresponds directly to an existing system call that
includes a 'struct timespec' argument, or a structure containing a timespec
or (in case of clock_adjtime) timeval. Not included here are new versions
of getitimer/setitimer and getrusage/waitid, which are planned for the
future but only needed to make a consistent API rather than for correct
operation beyond y2038. These four system calls are based on 'timeval', and
it has not been finally decided what the replacement kernel interface will
use instead.
So far, I have done a lot of build testing across most architectures, which
has found a number of bugs. Runtime testing so far included testing LTP on
32-bit ARM with the existing system calls, to ensure we do not regress for
existing binaries, and a test with a 32-bit x86 build of LTP against a
modified version of the musl C library that has been adapted to the new
system call interface [3]. This library can be used for testing on all
architectures supported by musl-1.1.21, but it is not how the support is
getting integrated into the official musl release. Official musl support is
planned but will require more invasive changes to the library.
Link: https://lore.kernel.org/lkml/20190110162435.309262-1-arnd@arndb.de/T/
Link: https://lore.kernel.org/lkml/20190118161835.2259170-1-arnd@arndb.de/
Link: https://git.linaro.org/people/arnd/musl-y2038.git/ [2]
A lot of system calls that pass a time_t somewhere have an implementation
using a COMPAT_SYSCALL_DEFINEx() on 64-bit architectures, and have
been reworked so that this implementation can now be used on 32-bit
architectures as well.
The missing step is to redefine them using the regular SYSCALL_DEFINEx()
to get them out of the compat namespace and make it possible to build them
on 32-bit architectures.
Any system call that ends in 'time' gets a '32' suffix on its name for
that version, while the others get a '_time32' suffix, to distinguish
them from the normal version, which takes a 64-bit time argument in the
future.
In this step, only 64-bit architectures are changed, doing this rename
first lets us avoid touching the 32-bit architectures twice.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Sargun reported a crash:
"I picked up c40f7d74c7 sched/fair: Fix
infinite loop in update_blocked_averages() by reverting a9e7f6544b
and put it on top of 4.19.13. In addition to this, I uninlined
list_add_leaf_cfs_rq for debugging.
This revealed a new bug that we didn't get to because we kept getting
crashes from the previous issue. When we are running with cgroups that
are rapidly changing, with CFS bandwidth control, and in addition
using the cpusets cgroup, we see this crash. Specifically, it seems to
occur with cgroups that are throttled and we change the allowed
cpuset."
The algorithm used to order cfs_rq in rq->leaf_cfs_rq_list assumes that
it will walk down to root the 1st time a cfs_rq is used and we will finish
to add either a cfs_rq without parent or a cfs_rq with a parent that is
already on the list. But this is not always true in presence of throttling.
Because a cfs_rq can be throttled even if it has never been used but other CPUs
of the cgroup have already used all the bandwdith, we are not sure to go down to
the root and add all cfs_rq in the list.
Ensure that all cfs_rq will be added in the list even if they are throttled.
[ mingo: Fix !CGROUPS build. ]
Reported-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: tj@kernel.org
Fixes: 9c2791f936 ("Fix hierarchical order in rq->leaf_cfs_rq_list")
Link: https://lkml.kernel.org/r/1548825767-10799-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The magic in list_add_leaf_cfs_rq() requires that at the end of
enqueue_task_fair():
rq->tmp_alone_branch == &rq->lead_cfs_rq_list
If this is violated, list integrity is compromised for list entries
and the tmp_alone_branch pointer might dangle.
Also, reflow list_add_leaf_cfs_rq() while there. This looses one
indentation level and generates a form that's convenient for the next
patch.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
move_queued_task() synchronizes with task_rq_lock() as follows:
move_queued_task() task_rq_lock()
[S] ->on_rq = MIGRATING [L] rq = task_rq()
WMB (__set_task_cpu()) ACQUIRE (rq->lock);
[S] ->cpu = new_cpu [L] ->on_rq
where "[L] rq = task_rq()" is ordered before "ACQUIRE (rq->lock)" by an
address dependency and, in turn, "ACQUIRE (rq->lock)" is ordered before
"[L] ->on_rq" by the ACQUIRE itself.
Use READ_ONCE() to load ->cpu in task_rq() (c.f., task_cpu()) to honor
this address dependency. Also, mark the accesses to ->cpu and ->on_rq
with READ_ONCE()/WRITE_ONCE() to comply with the LKMM.
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20190121155240.27173-1-andrea.parri@amarulasolutions.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
register_sched_domain_sysctl() copies the cpu_possible_mask into
sd_sysctl_cpus, but only if sd_sysctl_cpus hasn't already been
allocated (ie, CONFIG_CPUMASK_OFFSTACK is set). However, when
CONFIG_CPUMASK_OFFSTACK is not set, sd_sysctl_cpus is left
uninitialized (all zeroes) and the kernel may fail to initialize
sched_domain sysctl entries for all possible CPUs.
This is visible to the user if the kernel is booted with maxcpus=n, or
if ACPI tables have been modified to leave CPUs offline, and then
checking for missing /proc/sys/kernel/sched_domain/cpu* entries.
Fix this by separating the allocation and initialization, and adding a
flag to initialize the possible CPU entries while system booting only.
Tested-by: Syuuichirou Ishii <ishii.shuuichir@jp.fujitsu.com>
Tested-by: Tarumizu, Kohei <tarumizu.kohei@jp.fujitsu.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190129151245.5073-1-msys.mizuma@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
util_est is mainly meant to be a lower-bound for tasks utilization.
That's why task_util_est() returns the actual util_avg when it's higher
than the estimated utilization.
With new invaraince signal and without any special check on samples
collection, if a task is limited because of thermal capping for
example, we could end up overestimating its utilization and thus
perhaps generating an unwanted frequency spike when the capping is
relaxed... and (even worst) it will take some more activations for the
estimated utilization to converge back to the actual utilization.
Since we cannot easily know if there is idle time in a CPU when a task
completes an activation with a utilization higher then the CPU capacity,
we skip the sampling when utilization is higher than CPU's capacity.
Suggested-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten.Rasmussen@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: pjt@google.com
Cc: pkondeti@codeaurora.org
Cc: quentin.perret@arm.com
Cc: rjw@rjwysocki.net
Cc: srinivas.pandruvada@linux.intel.com
Cc: thara.gopinath@linaro.org
Link: https://lkml.kernel.org/r/1548257214-13745-4-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current implementation of load tracking invariance scales the
contribution with current frequency and uarch performance (only for
utilization) of the CPU. One main result of this formula is that the
figures are capped by current capacity of CPU. Another one is that the
load_avg is not invariant because not scaled with uarch.
The util_avg of a periodic task that runs r time slots every p time slots
varies in the range :
U * (1-y^r)/(1-y^p) * y^i < Utilization < U * (1-y^r)/(1-y^p)
with U is the max util_avg value = SCHED_CAPACITY_SCALE
At a lower capacity, the range becomes:
U * C * (1-y^r')/(1-y^p) * y^i' < Utilization < U * C * (1-y^r')/(1-y^p)
with C reflecting the compute capacity ratio between current capacity and
max capacity.
so C tries to compensate changes in (1-y^r') but it can't be accurate.
Instead of scaling the contribution value of PELT algo, we should scale the
running time. The PELT signal aims to track the amount of computation of
tasks and/or rq so it seems more correct to scale the running time to
reflect the effective amount of computation done since the last update.
In order to be fully invariant, we need to apply the same amount of
running time and idle time whatever the current capacity. Because running
at lower capacity implies that the task will run longer, we have to ensure
that the same amount of idle time will be applied when system becomes idle
and no idle time has been "stolen". But reaching the maximum utilization
value (SCHED_CAPACITY_SCALE) means that the task is seen as an
always-running task whatever the capacity of the CPU (even at max compute
capacity). In this case, we can discard this "stolen" idle times which
becomes meaningless.
In order to achieve this time scaling, a new clock_pelt is created per rq.
The increase of this clock scales with current capacity when something
is running on rq and synchronizes with clock_task when rq is idle. With
this mechanism, we ensure the same running and idle time whatever the
current capacity. This also enables to simplify the pelt algorithm by
removing all references of uarch and frequency and applying the same
contribution to utilization and loads. Furthermore, the scaling is done
only once per update of clock (update_rq_clock_task()) instead of during
each update of sched_entities and cfs/rt/dl_rq of the rq like the current
implementation. This is interesting when cgroup are involved as shown in
the results below:
On a hikey (octo Arm64 platform).
Performance cpufreq governor and only shallowest c-state to remove variance
generated by those power features so we only track the impact of pelt algo.
each test runs 16 times:
./perf bench sched pipe
(higher is better)
kernel tip/sched/core + patch
ops/seconds ops/seconds diff
cgroup
root 59652(+/- 0.18%) 59876(+/- 0.24%) +0.38%
level1 55608(+/- 0.27%) 55923(+/- 0.24%) +0.57%
level2 52115(+/- 0.29%) 52564(+/- 0.22%) +0.86%
hackbench -l 1000
(lower is better)
kernel tip/sched/core + patch
duration(sec) duration(sec) diff
cgroup
root 4.453(+/- 2.37%) 4.383(+/- 2.88%) -1.57%
level1 4.859(+/- 8.50%) 4.830(+/- 7.07%) -0.60%
level2 5.063(+/- 9.83%) 4.928(+/- 9.66%) -2.66%
Then, the responsiveness of PELT is improved when CPU is not running at max
capacity with this new algorithm. I have put below some examples of
duration to reach some typical load values according to the capacity of the
CPU with current implementation and with this patch. These values has been
computed based on the geometric series and the half period value:
Util (%) max capacity half capacity(mainline) half capacity(w/ patch)
972 (95%) 138ms not reachable 276ms
486 (47.5%) 30ms 138ms 60ms
256 (25%) 13ms 32ms 26ms
On my hikey (octo Arm64 platform) with schedutil governor, the time to
reach max OPP when starting from a null utilization, decreases from 223ms
with current scale invariance down to 121ms with the new algorithm.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten.Rasmussen@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: patrick.bellasi@arm.com
Cc: pjt@google.com
Cc: pkondeti@codeaurora.org
Cc: quentin.perret@arm.com
Cc: rjw@rjwysocki.net
Cc: srinivas.pandruvada@linux.intel.com
Cc: thara.gopinath@linaro.org
Link: https://lkml.kernel.org/r/1548257214-13745-3-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some users, specifically futexes and rwsems, required fixes
that allowed the callers to be safe when wakeups occur before
they are expected by wake_up_q(). Such scenarios also play
games and rely on reference counting, and until now were
pivoting on wake_q doing it. With the wake_q_add() call being
moved down, this can no longer be the case. As such we end up
with a a double task refcounting overhead; and these callers
care enough about this (being rather core-ish).
This patch introduces a wake_q_add_safe() call that serves
for callers that have already done refcounting and therefore the
task is 'safe' from wake_q point of view (int that it requires
reference throughout the entire queue/>wakeup cycle). In the one
case it has internal reference counting, in the other case it
consumes the reference counting.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Xie Yongji <xieyongji@baidu.com>
Cc: Yongji Xie <elohimes@gmail.com>
Cc: andrea.parri@amarulasolutions.com
Cc: lilin24@baidu.com
Cc: liuqi16@baidu.com
Cc: nixun@baidu.com
Cc: yuanlinsi01@baidu.com
Cc: zhangyu31@baidu.com
Link: https://lkml.kernel.org/r/20181218195352.7orq3upiwfdbrdne@linux-r8p5
Signed-off-by: Ingo Molnar <mingo@kernel.org>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable numa_group.refcount is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
** Important note for maintainers:
Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.
For the numa_group.refcount it might make a difference
in following places:
- get_numa_group(): increment in refcount_inc_not_zero() only
guarantees control dependency on success vs. fully ordered
atomic counterpart
- put_numa_group(): decrement in refcount_dec_and_test() only
provides RELEASE ordering and control dependency on success
vs. fully ordered atomic counterpart
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: viro@zeniv.linux.org.uk
Link: https://lkml.kernel.org/r/1547814450-18902-4-git-send-email-elena.reshetova@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull cpu hotplug fixes from Thomas Gleixner:
"Two fixes for the cpu hotplug machinery:
- Replace the overly clever 'SMT disabled by BIOS' detection logic as
it breaks KVM scenarios and prevents speculation control updates
when the Hyperthreads are brought online late after boot.
- Remove a redundant invocation of the speculation control update
function"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVM
x86/speculation: Remove redundant arch_smt_update() invocation
psi has provisions to shut off the periodic aggregation worker when
there is a period of no task activity - and thus no data that needs
aggregating. However, while developing psi monitoring, Suren noticed
that the aggregation clock currently won't stay shut off for good.
Debugging this revealed a flaw in the idle design: an aggregation run
will see no task activity and decide to go to sleep; shortly thereafter,
the kworker thread that executed the aggregation will go idle and cause
a scheduling change, during which the psi callback will kick the
!pending worker again. This will ping-pong forever, and is equivalent
to having no shut-off logic at all (but with more code!)
Fix this by exempting aggregation workers from psi's clock waking logic
when the state change is them going to sleep. To do this, tag workers
with the last work function they executed, and if in psi we see a worker
going to sleep after aggregating psi data, we will not reschedule the
aggregation work item.
What if the worker is also executing other items before or after?
Any psi state times that were incurred by work items preceding the
aggregation work will have been collected from the per-cpu buckets
during the aggregation itself. If there are work items following the
aggregation work, the worker's last_func tag will be overwritten and the
aggregator will be kept alive to process this genuine new activity.
If the aggregation work is the last thing the worker does, and we decide
to go idle, the brief period of non-idle time incurred between the
aggregation run and the kworker's dequeue will be stranded in the
per-cpu buckets until the clock is woken by later activity. But that
should not be a problem. The buckets can hold 4s worth of time, and
future activity will wake the clock with a 2s delay, giving us 2s worth
of data we can leave behind when disabling aggregation. If it takes a
worker more than two seconds to go idle after it finishes its last work
item, we likely have bigger problems in the system, and won't notice one
sample that was averaged with a bogus per-CPU weight.
Link: http://lkml.kernel.org/r/20190116193501.1910-1-hannes@cmpxchg.org
Fixes: eb414681d5 ("psi: pressure stall information for CPU, memory, and IO")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the following commit:
73d5e2b472 ("cpu/hotplug: detect SMT disabled by BIOS")
... the hotplug code attempted to detect when SMT was disabled by BIOS,
in which case it reported SMT as permanently disabled. However, that
code broke a virt hotplug scenario, where the guest is booted with only
primary CPU threads, and a sibling is brought online later.
The problem is that there doesn't seem to be a way to reliably
distinguish between the HW "SMT disabled by BIOS" case and the virt
"sibling not yet brought online" case. So the above-mentioned commit
was a bit misguided, as it permanently disabled SMT for both cases,
preventing future virt sibling hotplugs.
Going back and reviewing the original problems which were attempted to
be solved by that commit, when SMT was disabled in BIOS:
1) /sys/devices/system/cpu/smt/control showed "on" instead of
"notsupported"; and
2) vmx_vm_init() was incorrectly showing the L1TF_MSG_SMT warning.
I'd propose that we instead consider #1 above to not actually be a
problem. Because, at least in the virt case, it's possible that SMT
wasn't disabled by BIOS and a sibling thread could be brought online
later. So it makes sense to just always default the smt control to "on"
to allow for that possibility (assuming cpuid indicates that the CPU
supports SMT).
The real problem is #2, which has a simple fix: change vmx_vm_init() to
query the actual current SMT state -- i.e., whether any siblings are
currently online -- instead of looking at the SMT "control" sysfs value.
So fix it by:
a) reverting the original "fix" and its followup fix:
73d5e2b472 ("cpu/hotplug: detect SMT disabled by BIOS")
bc2d8d262c ("cpu/hotplug: Fix SMT supported evaluation")
and
b) changing vmx_vm_init() to query the actual current SMT state --
instead of the sysfs control value -- to determine whether the L1TF
warning is needed. This also requires the 'sched_smt_present'
variable to exported, instead of 'cpu_smt_control'.
Fixes: 73d5e2b472 ("cpu/hotplug: detect SMT disabled by BIOS")
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Joe Mario <jmario@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/e3a85d585da28cc333ecbc1e78ee9216e6da9396.1548794349.git.jpoimboe@redhat.com
In case of active balancing, we increase the balance interval to cover
pinned tasks cases not covered by all_pinned logic. Neverthless, the
active migration triggered by asym packing should be treated as the normal
unbalanced case and reset the interval to default value, otherwise active
migration for asym_packing can be easily delayed for hundreds of ms
because of this pinned task detection mechanism.
The same happens to other conditions tested in need_active_balance() like
misfit task and when the capacity of src_cpu is reduced compared to
dst_cpu (see comments in need_active_balance() for details).
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: valentin.schneider@arm.com
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When check_asym_packing() is triggered, the imbalance is set to:
busiest_stat.avg_load * busiest_stat.group_capacity / SCHED_CAPACITY_SCALE
But busiest_stat.avg_load equals:
sgs->group_load * SCHED_CAPACITY_SCALE / sgs->group_capacity
These divisions can generate a rounding that will make imbalance
slightly lower than the weighted load of the cfs_rq. But this is
enough to skip the rq in find_busiest_queue() and prevents asym
migration from happening.
Directly set imbalance to busiest's sgs->group_load to remove the
rounding.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: valentin.schneider@arm.com
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Newly idle load balancing is not always triggered when a CPU becomes idle.
This prevents the scheduler from getting a chance to migrate the task
for asym packing.
Enable active migration during idle load balance too.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: valentin.schneider@arm.com
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Traditionally hrtimer callbacks were run with IRQs disabled, but with
the introduction of HRTIMER_MODE_SOFT it is possible they run from
SoftIRQ context, which does _NOT_ have IRQs disabled.
Allow for the CFS bandwidth timers (period_timer and slack_timer) to
be ran from SoftIRQ context; this entails removing the assumption that
IRQs are already disabled from the locking.
While mainline doesn't strictly need this, -RT forces all timers not
explicitly marked with MODE_HARD into MODE_SOFT and trips over this.
And marking these timers as MODE_HARD doesn't make sense as they're
not required for RT operation and can potentially be quite expensive.
Reported-by: Tom Putzeys <tom.putzeys@be.atlascopco.com>
Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190107125231.GE14122@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
All that fancy new Energy-Aware scheduling foo is hidden behind a
static_key, which is awesome if you have the stuff enabled in your
config.
However, when you lack all the prerequisites it doesn't make any sense
to pretend we'll ever actually run this, so provide a little more clue
to the compiler so it can more agressively delete the code.
text data bss dec hex filename
50297 976 96 51369 c8a9 defconfig-build/kernel/sched/fair.o
49227 944 96 50267 c45b defconfig-build/kernel/sched/fair.o
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that synchronize_rcu() waits for preempt-disable regions of
code as well as RCU read-side critical sections, synchronize_sched()
can be replaced by synchronize_rcu(), in fact, synchronize_sched()
is now completely equivalent to synchronize_rcu(). This commit
therefore replaces synchronize_sched() with synchronize_rcu() so that
synchronize_sched() can eventually be removed entirely.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Now that call_rcu()'s callback is not invoked until after all
preempt-disable regions of code have completed (in addition to explicitly
marked RCU read-side critical sections), call_rcu() can be used in place
of call_rcu_sched(). This commit therefore makes that change.
While in the area, this commit also updates an outdated header comment
for for_each_domain().
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
The cmpxchg() will fail when the task is already in the process
of waking up, and as such is an extremely rare occurrence.
Micro-optimize the call and put an unlikely() around it.
To no surprise, when using CONFIG_PROFILE_ANNOTATED_BRANCHES
under a number of workloads the incorrect rate was a mere 1-2%.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yongji Xie <elohimes@gmail.com>
Cc: andrea.parri@amarulasolutions.com
Cc: lilin24@baidu.com
Cc: liuqi16@baidu.com
Cc: nixun@baidu.com
Cc: xieyongji@baidu.com
Cc: yuanlinsi01@baidu.com
Cc: zhangyu31@baidu.com
Link: https://lkml.kernel.org/r/20181203053130.gwkw6kg72azt2npb@linux-r8p5
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Notable cmpxchg() does not provide ordering when it fails, however
wake_q_add() requires ordering in this specific case too. Without this
it would be possible for the concurrent wakeup to not observe our
prior state.
Andrea Parri provided:
C wake_up_q-wake_q_add
{
int next = 0;
int y = 0;
}
P0(int *next, int *y)
{
int r0;
/* in wake_up_q() */
WRITE_ONCE(*next, 1); /* node->next = NULL */
smp_mb(); /* implied by wake_up_process() */
r0 = READ_ONCE(*y);
}
P1(int *next, int *y)
{
int r1;
/* in wake_q_add() */
WRITE_ONCE(*y, 1); /* wake_cond = true */
smp_mb__before_atomic();
r1 = cmpxchg_relaxed(next, 1, 2);
}
exists (0:r0=0 /\ 1:r1=0)
This "exists" clause cannot be satisfied according to the LKMM:
Test wake_up_q-wake_q_add Allowed
States 3
0:r0=0; 1:r1=1;
0:r0=1; 1:r1=0;
0:r0=1; 1:r1=1;
No
Witnesses
Positive: 0 Negative: 3
Condition exists (0:r0=0 /\ 1:r1=0)
Observation wake_up_q-wake_q_add Never 0 3
Reported-by: Yongji Xie <elohimes@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The only guarantee provided by wake_q_add() is that a wakeup will
happen after it, it does _NOT_ guarantee the wakeup will be delayed
until the matching wake_up_q().
If wake_q_add() fails the cmpxchg() a concurrent wakeup is pending and
that can happen at any time after the cmpxchg(). This means we should
not rely on the wakeup happening at wake_q_up(), but should be ready
for wake_q_add() to issue the wakeup.
The delay; if provided (most likely); should only result in more efficient
behaviour.
Reported-by: Yongji Xie <elohimes@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label".
The jump label is controlled by HAVE_JUMP_LABEL, which is defined
like this:
#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
# define HAVE_JUMP_LABEL
#endif
We can improve this by testing 'asm goto' support in Kconfig, then
make JUMP_LABEL depend on CC_HAS_ASM_GOTO.
Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will
match to the real kernel capability.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Merge more updates from Andrew Morton:
- procfs updates
- various misc bits
- lib/ updates
- epoll updates
- autofs
- fatfs
- a few more MM bits
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits)
mm/page_io.c: fix polled swap page in
checkpatch: add Co-developed-by to signature tags
docs: fix Co-Developed-by docs
drivers/base/platform.c: kmemleak ignore a known leak
fs: don't open code lru_to_page()
fs/: remove caller signal_pending branch predictions
mm/: remove caller signal_pending branch predictions
arch/arc/mm/fault.c: remove caller signal_pending_branch predictions
kernel/sched/: remove caller signal_pending branch predictions
kernel/locking/mutex.c: remove caller signal_pending branch predictions
mm: select HAVE_MOVE_PMD on x86 for faster mremap
mm: speed up mremap by 20x on large regions
mm: treewide: remove unused address argument from pte_alloc functions
initramfs: cleanup incomplete rootfs
scripts/gdb: fix lx-version string output
kernel/kcov.c: mark write_comp_data() as notrace
kernel/sysctl: add panic_print into sysctl
panic: add options to print system info when panic happens
bfs: extra sanity checking and static inode bitmap
exec: separate MM_ANONPAGES and RLIMIT_STACK accounting
...
This is already done for us internally by the signal machinery.
Link: http://lkml.kernel.org/r/20181116002713.8474-3-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhipeng Xie, Xie XiuQi and Sargun Dhillon reported lockups in the
scheduler under high loads, starting at around the v4.18 time frame,
and Zhipeng Xie tracked it down to bugs in the rq->leaf_cfs_rq_list
manipulation.
Do a (manual) revert of:
a9e7f6544b ("sched/fair: Fix O(nr_cgroups) in load balance path")
It turns out that the list_del_leaf_cfs_rq() introduced by this commit
is a surprising property that was not considered in followup commits
such as:
9c2791f936 ("sched/fair: Fix hierarchical order in rq->leaf_cfs_rq_list")
As Vincent Guittot explains:
"I think that there is a bigger problem with commit a9e7f6544b and
cfs_rq throttling:
Let take the example of the following topology TG2 --> TG1 --> root:
1) The 1st time a task is enqueued, we will add TG2 cfs_rq then TG1
cfs_rq to leaf_cfs_rq_list and we are sure to do the whole branch in
one path because it has never been used and can't be throttled so
tmp_alone_branch will point to leaf_cfs_rq_list at the end.
2) Then TG1 is throttled
3) and we add TG3 as a new child of TG1.
4) The 1st enqueue of a task on TG3 will add TG3 cfs_rq just before TG1
cfs_rq and tmp_alone_branch will stay on rq->leaf_cfs_rq_list.
With commit a9e7f6544b, we can del a cfs_rq from rq->leaf_cfs_rq_list.
So if the load of TG1 cfs_rq becomes NULL before step 2) above, TG1
cfs_rq is removed from the list.
Then at step 4), TG3 cfs_rq is added at the beginning of rq->leaf_cfs_rq_list
but tmp_alone_branch still points to TG3 cfs_rq because its throttled
parent can't be enqueued when the lock is released.
tmp_alone_branch doesn't point to rq->leaf_cfs_rq_list whereas it should.
So if TG3 cfs_rq is removed or destroyed before tmp_alone_branch
points on another TG cfs_rq, the next TG cfs_rq that will be added,
will be linked outside rq->leaf_cfs_rq_list - which is bad.
In addition, we can break the ordering of the cfs_rq in
rq->leaf_cfs_rq_list but this ordering is used to update and
propagate the update from leaf down to root."
Instead of trying to work through all these cases and trying to reproduce
the very high loads that produced the lockup to begin with, simplify
the code temporarily by reverting a9e7f6544b - which change was clearly
not thought through completely.
This (hopefully) gives us a kernel that doesn't lock up so people
can continue to enjoy their holidays without worrying about regressions. ;-)
[ mingo: Wrote changelog, fixed weird spelling in code comment while at it. ]
Analyzed-by: Xie XiuQi <xiexiuqi@huawei.com>
Analyzed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reported-by: Zhipeng Xie <xiezhipeng1@huawei.com>
Reported-by: Sargun Dhillon <sargun@sargun.me>
Reported-by: Xie XiuQi <xiexiuqi@huawei.com>
Tested-by: Zhipeng Xie <xiezhipeng1@huawei.com>
Tested-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: <stable@vger.kernel.org> # v4.13+
Cc: Bin Li <huawei.libin@huawei.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: a9e7f6544b ("sched/fair: Fix O(nr_cgroups) in load balance path")
Link: http://lkml.kernel.org/r/1545879866-27809-1-git-send-email-xiexiuqi@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Caused by making the variable static:
kernel/sched/fair.c:119:21: warning: 'capacity_margin' defined but not used [-Wunused-variable]
Seems easiest to just move it up under the existing ifdef CONFIG_SMP
that's a few lines above.
Fixes: ed8885a144 ('sched/fair: Make some variables static')
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Introduce "Energy Aware Scheduling" - by Quentin Perret.
This is a coherent topology description of CPUs in cooperation with
the PM subsystem, with the goal to schedule more energy-efficiently
on asymetric SMP platform - such as waking up tasks to the more
energy-efficient CPUs first, as long as the system isn't
oversubscribed.
For details of the design, see:
https://lore.kernel.org/lkml/20180724122521.22109-1-quentin.perret@arm.com/
- Misc cleanups and smaller enhancements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
sched/fair: Select an energy-efficient CPU on task wake-up
sched/fair: Introduce an energy estimation helper function
sched/fair: Add over-utilization/tipping point indicator
sched/fair: Clean-up update_sg_lb_stats parameters
sched/toplogy: Introduce the 'sched_energy_present' static key
sched/topology: Make Energy Aware Scheduling depend on schedutil
sched/topology: Disable EAS on inappropriate platforms
sched/topology: Add lowest CPU asymmetry sched_domain level pointer
sched/topology: Reference the Energy Model of CPUs when available
PM: Introduce an Energy Model management framework
sched/cpufreq: Prepare schedutil for Energy Aware Scheduling
sched/topology: Relocate arch_scale_cpu_capacity() to the internal header
sched/core: Remove unnecessary unlikely() in push_*_task()
sched/topology: Remove the ::smt_gain field from 'struct sched_domain'
sched: Fix various typos in comments
sched/core: Clean up the #ifdef block in add_nr_running()
sched/fair: Make some variables static
sched/core: Create task_has_idle_policy() helper
sched/fair: Add lsub_positive() and use it consistently
sched/fair: Mask UTIL_AVG_UNCHANGED usages
...
Pull locking updates from Ingo Molnar:
"The main change in this cycle are initial preparatory bits of dynamic
lockdep keys support from Bart Van Assche.
There are also misc changes, a comment cleanup and a data structure
cleanup"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Clean up comment in nohz_idle_balance()
locking/lockdep: Stop using RCU primitives to access 'all_lock_classes'
locking/lockdep: Make concurrent lockdep_reset_lock() calls safe
locking/lockdep: Remove a superfluous INIT_LIST_HEAD() statement
locking/lockdep: Introduce lock_class_cache_is_registered()
locking/lockdep: Inline __lockdep_init_map()
locking/lockdep: Declare local symbols static
tools/lib/lockdep/tests: Test the lockdep_reset_lock() implementation
tools/lib/lockdep: Add dummy print_irqtrace_events() implementation
tools/lib/lockdep: Rename "trywlock" into "trywrlock"
tools/lib/lockdep/tests: Run lockdep tests a second time under Valgrind
tools/lib/lockdep/tests: Improve testing accuracy
tools/lib/lockdep/tests: Fix shellcheck warnings
tools/lib/lockdep/tests: Display compiler warning and error messages
locking/lockdep: Remove ::version from lock_class structure
Pull RCU updates from Ingo Molnar:
"The biggest RCU changes in this cycle were:
- Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar.
- Replace calls of RCU-bh and RCU-sched update-side functions to
their vanilla RCU counterparts. This series is a step towards
complete removal of the RCU-bh and RCU-sched update-side functions.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- Documentation updates, including a number of flavor-consolidation
updates from Joel Fernandes.
- Miscellaneous fixes.
- Automate generation of the initrd filesystem used for rcutorture
testing.
- Convert spin_is_locked() assertions to instead use lockdep.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- SRCU updates, especially including a fix from Dennis Krein for a
bag-on-head-class bug.
- RCU torture-test updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
rcutorture: Don't do busted forward-progress testing
rcutorture: Use 100ms buckets for forward-progress callback histograms
rcutorture: Recover from OOM during forward-progress tests
rcutorture: Print forward-progress test age upon failure
rcutorture: Print time since GP end upon forward-progress failure
rcutorture: Print histogram of CB invocation at OOM time
rcutorture: Print GP age upon forward-progress failure
rcu: Print per-CPU callback counts for forward-progress failures
rcu: Account for nocb-CPU callback counts in RCU CPU stall warnings
rcutorture: Dump grace-period diagnostics upon forward-progress OOM
rcutorture: Prepare for asynchronous access to rcu_fwd_startat
torture: Remove unnecessary "ret" variables
rcutorture: Affinity forward-progress test to avoid housekeeping CPUs
rcutorture: Break up too-long rcu_torture_fwd_prog() function
rcutorture: Remove cbflood facility
torture: Bring any extra CPUs online during kernel startup
rcutorture: Add call_rcu() flooding forward-progress tests
rcutorture/formal: Replace synchronize_sched() with synchronize_rcu()
tools/kernel.h: Replace synchronize_sched() with synchronize_rcu()
net/decnet: Replace rcu_barrier_bh() with rcu_barrier()
...
Energy-aware scheduling is only meant to be active while the system is
_not_ over-utilized. That is, there are spare cycles available to shift
tasks around based on their actual utilization to get a more
energy-efficient task distribution without depriving any tasks. When
above the tipping point task placement is done the traditional way based
on load_avg, spreading the tasks across as many cpus as possible based
on priority scaled load to preserve smp_nice. Below the tipping point we
want to use util_avg instead. We need to define a criteria for when we
make the switch.
The util_avg for each cpu converges towards 100% regardless of how many
additional tasks we may put on it. If we define over-utilized as:
sum_{cpus}(rq.cfs.avg.util_avg) + margin > sum_{cpus}(rq.capacity)
some individual cpus may be over-utilized running multiple tasks even
when the above condition is false. That should be okay as long as we try
to spread the tasks out to avoid per-cpu over-utilization as much as
possible and if all tasks have the _same_ priority. If the latter isn't
true, we have to consider priority to preserve smp_nice.
For example, we could have n_cpus nice=-10 util_avg=55% tasks and
n_cpus/2 nice=0 util_avg=60% tasks. Balancing based on util_avg we are
likely to end up with nice=-10 tasks sharing cpus and nice=0 tasks
getting their own as we 1.5*n_cpus tasks in total and 55%+55% is less
over-utilized than 55%+60% for those cpus that have to be shared. The
system utilization is only 85% of the system capacity, but we are
breaking smp_nice.
To be sure not to break smp_nice, we have defined over-utilization
conservatively as when any cpu in the system is fully utilized at its
highest frequency instead:
cpu_rq(any).cfs.avg.util_avg + margin > cpu_rq(any).capacity
IOW, as soon as one cpu is (nearly) 100% utilized, we switch to load_avg
to factor in priority to preserve smp_nice.
With this definition, we can skip periodic load-balance as no cpu has an
always-running task when the system is not over-utilized. All tasks will
be periodic and we can balance them at wake-up. This conservative
condition does however mean that some scenarios that could benefit from
energy-aware decisions even if one cpu is fully utilized would not get
those benefits.
For systems where some cpus might have reduced capacity on some cpus
(RT-pressure and/or big.LITTLE), we want periodic load-balance checks as
soon a just a single cpu is fully utilized as it might one of those with
reduced capacity and in that case we want to migrate it.
[ peterz: Added a comment explaining why new tasks are not accounted during
overutilization detection. ]
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: adharmap@codeaurora.org
Cc: chris.redpath@arm.com
Cc: currojerez@riseup.net
Cc: dietmar.eggemann@arm.com
Cc: edubezval@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: javi.merino@kernel.org
Cc: joel@joelfernandes.org
Cc: juri.lelli@redhat.com
Cc: patrick.bellasi@arm.com
Cc: pkondeti@codeaurora.org
Cc: rjw@rjwysocki.net
Cc: skannan@codeaurora.org
Cc: smuckle@google.com
Cc: srinivas.pandruvada@linux.intel.com
Cc: thara.gopinath@linaro.org
Cc: tkjos@google.com
Cc: valentin.schneider@arm.com
Cc: vincent.guittot@linaro.org
Cc: viresh.kumar@linaro.org
Link: https://lkml.kernel.org/r/20181203095628.11858-13-quentin.perret@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
WARN_ON() already contains an unlikely(), so it's not necessary to
use WARN_ON(1).
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181103172602.1917-1-tiny.windzz@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
::smt_gain is used to compute the capacity of CPUs of a SMT core with the
constraint 1 < ::smt_gain < 2 in order to be able to compute number of CPUs
per core. The field has_free_capacity of struct numa_stat, which was the
last user of this computation of number of CPUs per core, has been removed
by:
2d4056fafa ("sched/numa: Remove numa_has_capacity()")
We can now remove this constraint on core capacity and use the defautl value
SCHED_CAPACITY_SCALE for SMT CPUs. With this remove, SCHED_CAPACITY_SCALE
becomes the maximum compute capacity of CPUs on every systems. This should
help to simplify some code and remove fields like rd->max_cpu_capacity
Furthermore, arch_scale_cpu_capacity() is used with a NULL sd in several other
places in the code when it wants the capacity of a CPUs to scale
some metrics like in pelt, deadline or schedutil. In case on SMT, the value
returned is not the capacity of SMT CPUs but default SCHED_CAPACITY_SCALE.
So remove it.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1535548752-4434-4-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Concerning the comment associated to the atomic_fetch_andnot() in
nohz_idle_balance(), Vincent explains [1]:
"[...] the comment is useless and can be removed [...] it was
referring to a line code above the comment that was present in
a previous iteration of the patchset. This line disappeared in
final version but the comment has stayed."
So remove the comment.
Vincent also points out that the full ordering associated to the
atomic_fetch_andnot() primitive could be relaxed, but this patch
insists on the current more conservative/fully ordered solution:
"Performance" isn't a concern, stay away from "correctness"/subtle
relaxed (re)ordering if possible..., just make sure not to confuse
the next reader with misleading/out-of-date comments.
[1] http://lkml.kernel.org/r/CAKfTPtBjA-oCBRkO6__npQwL3+HLjzk7riCcPU1R7YdO-EpuZg@mail.gmail.com
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181127110110.5533-1-andrea.parri@amarulasolutions.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The SPDX tags are not present in cpufreq.c and cpufreq_schedutil.c.
Add them and remove the license descriptions
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Peter Zijlstra