[ Upstream commit d1ee7e1f5c ]
If '-o' was used more than 64 times in a single invocation of gpio-hammer,
this could lead to an overflow of the 'lines' array. This commit fixes
this by avoiding the overflow and giving a proper diagnostic back to the
user
Signed-off-by: Gabriel Ravier <gabravier@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee44d0b788 ]
When we fail allocating the DMA buffers in axienet_dma_bd_init(), we
report this error, but carry on with initialisation nevertheless.
This leads to a kernel panic when the driver later wants to send a
packet, as it uses uninitialised data structures.
Make the axienet_device_reset() routine return an error value, as it
contains the DMA buffer initialisation. Make sure we propagate the error
up the chain and eventually fail the driver initialisation, to avoid
relying on non-initialised buffers.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d74b181a02 ]
'snprintf' returns the number of characters which would be generated for
the given input.
If the returned value is *greater than* or equal to the buffer size, it
means that the output has been truncated.
Fix the overflow test accordingly.
Fixes: 7780c25bae ("perf tools: Allow ability to map cpus to nodes easily")
Fixes: 92a7e12780 ("perf cpumap: Add cpu__max_present_cpu()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: He Zhe <zhe.he@windriver.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200324070319.10901-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cf4df30a9 ]
Terminate and flush DMA internal buffers, before pushing RX data to
higher layer. Otherwise, this will lead to data corruption, as driver
would end up pushing stale buffer data to higher layer while actual data
is still stuck inside DMA hardware and has yet not arrived at the
memory.
While at that, replace deprecated dmaengine_terminate_all() with
dmaengine_terminate_async().
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200319110344.21348-2-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f19c3f6c81 ]
When port's throttle callback is called, it should stop pushing any more
data into TTY buffer to avoid buffer overflow. This means driver has to
stop HW from receiving more data and assert the HW flow control. For
UARTs with auto HW flow control (such as 8250_omap) manual assertion of
flow control line is not possible and only way is to allow RX FIFO to
fill up, thus trigger auto HW flow control logic.
Therefore make sure that 8250 generic IRQ handler does not drain data
when port is stopped (i.e UART_LSR_DR is unset in read_status_mask). Not
servicing, RX FIFO would trigger auto HW flow control when FIFO
occupancy reaches preset threshold, thus halting RX.
Since, error conditions in UART_LSR register are cleared just by reading
the register, data has to be drained in case there are FIFO errors, else
error information will lost.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200319103230.16867-2-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b02e407cb ]
So far only the reset bit it set, but the handler executing the reset
is not scheduled. Therefore nothing will happen until some other action
schedules the handler. Improve this by ensuring that the handler is
scheduled.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a0afa0ecf ]
If we have an error while processing the reloc roots we could leak roots
that were added to rc->reloc_roots before we hit the error. We could
have also not removed the reloc tree mapping from our rb_tree, so clean
up any remaining nodes in the reloc root rb_tree.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ use rbtree_postorder_for_each_entry_safe ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2abc726ab4 ]
We previously were checking if the root had a dead root before accessing
root->reloc_root in order to avoid a use-after-free type bug. However
this scenario happens after we've unset the reloc control, so we would
have been saved if we'd simply checked for fs_info->reloc_control. At
this point during relocation we no longer need to be creating new reloc
roots, so simply move this check above the reloc_root checks to avoid
any future races and confusion.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4953f7ef1 ]
Reproducible with a clang asan build and then running perf test in
particular 'Parse event definition strings'.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200314170356.62914-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39056e8a98 ]
If the common register memory resource is not available the driver needs
to fail gracefully to disable PM. Instead of returning the error
directly store it in ret and use the already existing error path.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200310114709.1483860-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf2cbe044d ]
Clang warns:
../kernel/trace/trace.c:9335:33: warning: array comparison always
evaluates to true [-Wtautological-compare]
if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt)
^
1 warning generated.
These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning and
does not change the runtime result of the check (tested with some print
statements compiled in with clang + ld.lld and gcc + ld.bfd in QEMU).
Link: http://lkml.kernel.org/r/20200220051011.26113-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/893
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0478b4fc5f ]
If the opp table specifies opp-supported-hw as a property but the driver
has not set a supported hardware value the OPP subsystem will reject
all the table entries.
Set a "default" value that will match the default table entries but not
conflict with any possible real bin values. Also fix a small memory leak
and free the buffer allocated by nvmem_cell_read().
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66be340f82 ]
We should free resources in unlikely case of allocation failure.
Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dff3064c7 ]
On P9 DD2.2 due to a CPU defect some TM instructions need to be emulated by
KVM. This is handled at first by the hardware raising a softpatch interrupt
when certain TM instructions that need KVM assistance are executed in the
guest. Althought some TM instructions per Power ISA are invalid forms they
can raise a softpatch interrupt too. For instance, 'tresume.' instruction
as defined in the ISA must have bit 31 set (1), but an instruction that
matches 'tresume.' PO and XO opcode fields but has bit 31 not set (0), like
0x7cfe9ddc, also raises a softpatch interrupt. Similarly for 'treclaim.'
and 'trechkpt.' instructions with bit 31 = 0, i.e. 0x7c00075c and
0x7c0007dc, respectively. Hence, if a code like the following is executed
in the guest it will raise a softpatch interrupt just like a 'tresume.'
when the TM facility is enabled ('tabort. 0' in the example is used only
to enable the TM facility):
int main() { asm("tabort. 0; .long 0x7cfe9ddc;"); }
Currently in such a case KVM throws a complete trace like:
[345523.705984] WARNING: CPU: 24 PID: 64413 at arch/powerpc/kvm/book3s_hv_tm.c:211 kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
[345523.705985] Modules linked in: kvm_hv(E) xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat
iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ebtable_filter ebtables ip6table_filter
ip6_tables iptable_filter bridge stp llc sch_fq_codel ipmi_powernv at24 vmx_crypto ipmi_devintf ipmi_msghandler
ibmpowernv uio_pdrv_genirq kvm opal_prd uio leds_powernv ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp
libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456
async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear tg3
crct10dif_vpmsum crc32c_vpmsum ipr [last unloaded: kvm_hv]
[345523.706030] CPU: 24 PID: 64413 Comm: CPU 0/KVM Tainted: G W E 5.5.0+ #1
[345523.706031] NIP: c0080000072cb9c0 LR: c0080000072b5e80 CTR: c0080000085c7850
[345523.706034] REGS: c000000399467680 TRAP: 0700 Tainted: G W E (5.5.0+)
[345523.706034] MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 24022428 XER: 00000000
[345523.706042] CFAR: c0080000072b5e7c IRQMASK: 0
GPR00: c0080000072b5e80 c000000399467910 c0080000072db500 c000000375ccc720
GPR04: c000000375ccc720 00000003fbec0000 0000a10395dda5a6 0000000000000000
GPR08: 000000007cfe9ddc 7cfe9ddc000005dc 7cfe9ddc7c0005dc c0080000072cd530
GPR12: c0080000085c7850 c0000003fffeb800 0000000000000001 00007dfb737f0000
GPR16: c0002001edcca558 0000000000000000 0000000000000000 0000000000000001
GPR20: c000000001b21258 c0002001edcca558 0000000000000018 0000000000000000
GPR24: 0000000001000000 ffffffffffffffff 0000000000000001 0000000000001500
GPR28: c0002001edcc4278 c00000037dd80000 800000050280f033 c000000375ccc720
[345523.706062] NIP [c0080000072cb9c0] kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
[345523.706065] LR [c0080000072b5e80] kvmppc_handle_exit_hv.isra.53+0x3e8/0x798 [kvm_hv]
[345523.706066] Call Trace:
[345523.706069] [c000000399467910] [c000000399467940] 0xc000000399467940 (unreliable)
[345523.706071] [c000000399467950] [c000000399467980] 0xc000000399467980
[345523.706075] [c0000003994679f0] [c0080000072bd1c4] kvmhv_run_single_vcpu+0xa1c/0xb80 [kvm_hv]
[345523.706079] [c000000399467ac0] [c0080000072bd8e0] kvmppc_vcpu_run_hv+0x5b8/0xb00 [kvm_hv]
[345523.706087] [c000000399467b90] [c0080000085c93cc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[345523.706095] [c000000399467bb0] [c0080000085c582c] kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
[345523.706101] [c000000399467c40] [c0080000085b7498] kvm_vcpu_ioctl+0x3d0/0x7b0 [kvm]
[345523.706105] [c000000399467db0] [c0000000004adf9c] ksys_ioctl+0x13c/0x170
[345523.706107] [c000000399467e00] [c0000000004adff8] sys_ioctl+0x28/0x80
[345523.706111] [c000000399467e20] [c00000000000b278] system_call+0x5c/0x68
[345523.706112] Instruction dump:
[345523.706114] 419e0390 7f8a4840 409d0048 6d497c00 2f89075d 419e021c 6d497c00 2f8907dd
[345523.706119] 419e01c0 6d497c00 2f8905dd 419e00a4 <0fe00000> 38210040 38600000 ebc1fff0
and then treats the executed instruction as a 'nop'.
However the POWER9 User's Manual, in section "4.6.10 Book II Invalid
Forms", informs that for TM instructions bit 31 is in fact ignored, thus
for the TM-related invalid forms ignoring bit 31 and handling them like the
valid forms is an acceptable way to handle them. POWER8 behaves the same
way too.
This commit changes the handling of the cases here described by treating
the TM-related invalid forms that can generate a softpatch interrupt
just like their valid forms (w/ bit 31 = 1) instead of as a 'nop' and by
gently reporting any other unrecognized case to the host and treating it as
illegal instruction instead of throwing a trace and treating it as a 'nop'.
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-By: Michael Neuling <mikey@neuling.org>
Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 397c772966 ]
Some versions of Intel TH have an issue that prevents the multi mode of
MSU from working correctly, resulting in no trace data and potentially
stuck MSU pipeline.
Disable multi mode on such devices.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200317062215.15598-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bede86a39d ]
When creating a cm_id during REQ the id immediately becomes visible to the
other MAD handlers, and shortly after the state is moved to IB_CM_REQ_RCVD
This allows cm_rej_handler() to run concurrently and free the work:
CPU 0 CPU1
cm_req_handler()
ib_create_cm_id()
cm_match_req()
id_priv->state = IB_CM_REQ_RCVD
cm_rej_handler()
cm_acquire_id()
spin_lock(&id_priv->lock)
switch (id_priv->state)
case IB_CM_REQ_RCVD:
cm_reset_to_idle()
kfree(id_priv->timewait_info);
goto destroy
destroy:
kfree(id_priv->timewait_info);
id_priv->timewait_info = NULL
Causing a double free or worse.
Do not free the timewait_info without also holding the
id_priv->lock. Simplify this entire flow by making the free unconditional
during cm_destroy_id() and removing the confusing special case error
unwind during creation of the timewait_info.
This also fixes a leak of the timewait if cm_destroy_id() is called in
IB_CM_ESTABLISHED with an XRC TGT QP. The state machine will be left in
ESTABLISHED while it needed to transition through IB_CM_TIMEWAIT to
release the timewait pointer.
Also fix a leak of the timewait_info if the caller mis-uses the API and
does ib_send_cm_reqs().
Fixes: a977049dac ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/20200310092545.251365-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a451b12311 ]
In NFSv4, the lock stateids are tied to the lockowner, and the open stateid,
so that the action of closing the file also results in either an automatic
loss of the locks, or an error of the form NFS4ERR_LOCKS_HELD.
In practice this means we must not add new locks to the open stateid
after the close process has been invoked. In fact doing so, can result
in the following panic:
kernel BUG at lib/list_debug.c:51!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 2 PID: 1085 Comm: nfsd Not tainted 5.6.0-rc3+ #2
Hardware name: VMware, Inc. VMware7,1/440BX Desktop Reference Platform, BIOS VMW71.00V.14410784.B64.1908150010 08/15/2019
RIP: 0010:__list_del_entry_valid.cold+0x31/0x55
Code: 1a 3d 9b e8 74 10 c2 ff 0f 0b 48 c7 c7 f0 1a 3d 9b e8 66 10 c2 ff 0f 0b 48 89 f2 48 89 fe 48 c7 c7 b0 1a 3d 9b e8 52 10 c2 ff <0f> 0b 48 89 fe 4c 89 c2 48 c7 c7 78 1a 3d 9b e8 3e 10 c2 ff 0f 0b
RSP: 0018:ffffb296c1d47d90 EFLAGS: 00010246
RAX: 0000000000000054 RBX: ffff8ba032456ec8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8ba039e99cc8 RDI: ffff8ba039e99cc8
RBP: ffff8ba032456e60 R08: 0000000000000781 R09: 0000000000000003
R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ba009a4abe0
R13: ffff8ba032456e8c R14: 0000000000000000 R15: ffff8ba00adb01d8
FS: 0000000000000000(0000) GS:ffff8ba039e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb213f0b008 CR3: 00000001347de006 CR4: 00000000003606e0
Call Trace:
release_lock_stateid+0x2b/0x80 [nfsd]
nfsd4_free_stateid+0x1e9/0x210 [nfsd]
nfsd4_proc_compound+0x414/0x700 [nfsd]
? nfs4svc_decode_compoundargs+0x407/0x4c0 [nfsd]
nfsd_dispatch+0xc1/0x200 [nfsd]
svc_process_common+0x476/0x6f0 [sunrpc]
? svc_sock_secure_port+0x12/0x30 [sunrpc]
? svc_recv+0x313/0x9c0 [sunrpc]
? nfsd_svc+0x2d0/0x2d0 [nfsd]
svc_process+0xd4/0x110 [sunrpc]
nfsd+0xe3/0x140 [nfsd]
kthread+0xf9/0x130
? nfsd_destroy+0x50/0x50 [nfsd]
? kthread_park+0x90/0x90
ret_from_fork+0x1f/0x40
The fix is to ensure that lock creation tests for whether or not the
open stateid is unhashed, and to fail if that is the case.
Fixes: 659aefb68e ("nfsd: Ensure we don't recognise lock stateids after freeing them")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c11af8131a ]
The RTC IRQ is requested before the struct rtc_device is allocated,
this may lead to a NULL pointer dereference in the IRQ handler.
To fix this issue, allocating the rtc_device struct before requesting
the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device
to register the RTC device.
Link: https://lore.kernel.org/r/20200306073404.56921-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2997775b1 ]
Both RTC IRQs are requested before the struct rtc_device is allocated,
this may lead to a NULL pointer dereference in the IRQ handler.
To fix this issue, allocating the rtc_device struct before requesting
the IRQs using devm_rtc_allocate_device, and use rtc_register_device
to register the RTC device.
Link: https://lore.kernel.org/r/20200306010146.39762-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8d74ea3c0 ]
Synchronize with the results from the CRQs before continuing with
the initialization. This avoids trying to send TPM commands while
the rtce buffer has not been allocated, yet.
This patch fixes an existing race condition that may occurr if the
hypervisor does not quickly respond to the VTPM_GET_RTCE_BUFFER_SIZE
request sent during initialization and therefore the ibmvtpm->rtce_buf
has not been allocated at the time the first TPM command is sent.
Fixes: 132f762947 ("drivers/char/tpm: Add new device driver to support IBM vTPM")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e107cf869 ]
In xchk_dir_actor, we attempt to validate the directory hash structures
by performing a directory entry lookup by (hashed) name. If the lookup
returns ENOENT, that means that the hash information is corrupt. The
_process_error functions don't catch this, so we have to add that
explicitly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cb5deb5bc ]
If we decide that a directory free block is corrupt, we must take care
not to leak a buffer pointer to the caller. After xfs_trans_brelse
returns, the buffer can be freed or reused, which means that we have to
set *bpp back to NULL.
Callers are supposed to notice the nonzero return value and not use the
buffer pointer, but we should code more defensively, even if all current
callers handle this situation correctly.
Fixes: de14c5f541 ("xfs: verify free block header fields")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cbd7814bb ]
SiFive's UART has a software controller clock divider that produces the
final baud rate clock. Whenever the clock that drives the UART is
changed this divider must be updated accordingly, and given that these
two events are controlled by software they cannot be done atomically.
During the period between updating the UART's driving clock and internal
divider the UART will transmit a different baud rate than what the user
has configured, which will probably result in a corrupted transmission
stream.
The SiFive UART has a FIFO, but due to an issue with the programming
interface there is no way to directly determine when the UART has
finished transmitting. We're essentially restricted to dead reckoning
in order to figure that out: we can use the FIFO's TX busy register to
figure out when the last frame has begun transmission and just delay for
a long enough that the last frame is guaranteed to get out.
As far as the actual implementation goes: I've modified the existing
existing clock notifier function to drain both the FIFO and the shift
register in on PRE_RATE_CHANGE. As far as I know there is no hardware
flow control in this UART, so there's no good way to ask the other end
to stop transmission while we can't receive (inserting software flow
control messages seems like a bad idea here).
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Tested-by: Yash Shah <yash.shah@sifive.com>
Link: https://lore.kernel.org/r/20200307042637.83728-1-palmer@dabbelt.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7463e2dc6 ]
The shifting of buf[3] by 24 bits to the left will be promoted to
a 32 bit signed int and then sign-extended to an unsigned long. In
the unlikely event that the the top bit of buf[3] is set then all
then all the upper bits end up as also being set because of
the sign-extension and this affect the ev->post_bit_error sum.
Fix this by using the temporary u32 variable bit_error to avoid
the sign-extension promotion. This also removes the need to do the
computation twice.
Addresses-Coverity: ("Unintended sign extension")
Fixes: 267897a470 ("[media] tda10071: implement DVBv5 statistics")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bef18d308a ]
Fixes the occasional adapter panic when sg_reset is issued with -d, -t, -b
and -H flags. Removal of command type HBA_IU_TYPE_SCSI_TM_REQ in
aac_hba_send since iu_type, request_id and fib_flags are not populated.
Device and target reset handlers are made to send TMF commands only when
reset_state is 0.
Link: https://lore.kernel.org/r/1581553771-25796-1-git-send-email-Sagar.Biradar@microchip.com
Reviewed-by: Sagar Biradar <Sagar.Biradar@microchip.com>
Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com>
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9f5baa136 ]
When 'etm->instructions_sample_period' is less than
'tidq->period_instructions', the function cs_etm__sample() cannot handle
this case properly with its logic.
Let's see below flow as an example:
- If we set itrace option '--itrace=i4', then function cs_etm__sample()
has variables with initialized values:
tidq->period_instructions = 0
etm->instructions_sample_period = 4
- When the first packet is coming:
packet->instr_count = 10; the number of instructions executed in this
packet is 10, thus update period_instructions as below:
tidq->period_instructions = 0 + 10 = 10
instrs_over = 10 - 4 = 6
offset = 10 - 6 - 1 = 3
tidq->period_instructions = instrs_over = 6
- When the second packet is coming:
packet->instr_count = 10; in the second pass, assume 10 instructions
in the trace sample again:
tidq->period_instructions = 6 + 10 = 16
instrs_over = 16 - 4 = 12
offset = 10 - 12 - 1 = -3 -> the negative value
tidq->period_instructions = instrs_over = 12
So after handle these two packets, there have below issues:
The first issue is that cs_etm__instr_addr() returns the address within
the current trace sample of the instruction related to offset, so the
offset is supposed to be always unsigned value. But in fact, function
cs_etm__sample() might calculate a negative offset value (in handling
the second packet, the offset is -3) and pass to cs_etm__instr_addr()
with u64 type with a big positive integer.
The second issue is it only synthesizes 2 samples for sample period = 4.
In theory, every packet has 10 instructions so the two packets have
total 20 instructions, 20 instructions should generate 5 samples
(4 x 5 = 20). This is because cs_etm__sample() only calls once
cs_etm__synth_instruction_sample() to generate instruction sample per
range packet.
This patch fixes the logic in function cs_etm__sample(); the basic
idea for handling coming packet is:
- To synthesize the first instruction sample, it combines the left
instructions from the previous packet and the head of the new
packet; then generate continuous samples with sample period;
- At the tail of the new packet, if it has the rest instructions,
these instructions will be left for the sequential sample.
Suggested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200219021811.20067-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d01751563c ]
If use option '--itrace=iNNN' with Arm CoreSight trace data, perf tool
fails inject instruction samples; the root cause is the packets are only
swapped for branch samples and last branches but not for instruction
samples, so the new coming packets cannot be properly handled for only
synthesizing instruction samples.
To fix this issue, this patch refactors the code with a new function
cs_etm__packet_swap() which is used to swap packets and adds the
condition for instruction samples.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200219021811.20067-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8719b6d29d ]
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Message-Id: <20200304005049.5291-1-afzal.mohd.ma@gmail.com>
[heiko.carstens@de.ibm.com: replace pr_err with panic]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a33691c4c ]
Currently there are only 10 bytes to store the cpu-topology 'name'
information. Only 10 bytes copied into cluster/thread/core names.
If the cluster ID exceeds 2-digit number, it will result in the data
corruption, and ending up in a dead loop in the parsing routines. The
same applies to the thread names with more that 3-digit number.
This issue was found using the boundary tests under virtualised
environment like QEMU.
Let us increase the buffer to fix such potential issues.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Link: https://lore.kernel.org/r/1583294092-5929-1-git-send-email-prime.zeng@hisilicon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55be2f5033 ]
We need to check for errors when calling cpu_pm_enter() and
cpu_cluster_pm_enter(). And we need to bail out on errors as
otherwise we can enter a deeper idle state when not desired.
I'm not aware of the lack of error handling causing issues yet,
but we need this at least for blocking deeper idle states when
a GPIO instance has pending interrupts.
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20200304225433.37336-2-tony@atomide.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3e5ea6ee5 ]
Jeff Moyer has reported that one of xfstests triggers a warning when run
on DAX-enabled filesystem:
WARNING: CPU: 76 PID: 51024 at mm/memory.c:2317 wp_page_copy+0xc40/0xd50
...
wp_page_copy+0x98c/0xd50 (unreliable)
do_wp_page+0xd8/0xad0
__handle_mm_fault+0x748/0x1b90
handle_mm_fault+0x120/0x1f0
__do_page_fault+0x240/0xd70
do_page_fault+0x38/0xd0
handle_page_fault+0x10/0x30
The warning happens on failed __copy_from_user_inatomic() which tries to
copy data into a CoW page.
This happens because of race between MADV_DONTNEED and CoW page fault:
CPU0 CPU1
handle_mm_fault()
do_wp_page()
wp_page_copy()
do_wp_page()
madvise(MADV_DONTNEED)
zap_page_range()
zap_pte_range()
ptep_get_and_clear_full()
<TLB flush>
__copy_from_user_inatomic()
sees empty PTE and fails
WARN_ON_ONCE(1)
clear_page()
The solution is to re-try __copy_from_user_inatomic() under PTL after
checking that PTE is matches the orig_pte.
The second copy attempt can still fail, like due to non-readable PTE, but
there's nothing reasonable we can do about, except clearing the CoW page.
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: Justin He <Justin.He@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: http://lkml.kernel.org/r/20200218154151.13349-1-kirill.shutemov@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f5777fbaf ]
The memory for global pointer is never freed during normal program
execution, so let's do that in the main function exit as a good
programming practice.
A stray blank line is also removed.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1583406486-154841-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dce8e23710 ]
KCSAN find inode->i_disksize could be accessed concurrently.
BUG: KCSAN: data-race in ext4_mark_iloc_dirty / ext4_write_end
write (marked) to 0xffff8b8932f40090 of 8 bytes by task 66792 on cpu 0:
ext4_write_end+0x53f/0x5b0
ext4_da_write_end+0x237/0x510
generic_perform_write+0x1c4/0x2a0
ext4_buffered_write_iter+0x13a/0x210
ext4_file_write_iter+0xe2/0x9b0
new_sync_write+0x29c/0x3a0
__vfs_write+0x92/0xa0
vfs_write+0xfc/0x2a0
ksys_write+0xe8/0x140
__x64_sys_write+0x4c/0x60
do_syscall_64+0x8a/0x2a0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
read to 0xffff8b8932f40090 of 8 bytes by task 14414 on cpu 1:
ext4_mark_iloc_dirty+0x716/0x1190
ext4_mark_inode_dirty+0xc9/0x360
ext4_convert_unwritten_extents+0x1bc/0x2a0
ext4_convert_unwritten_io_end_vec+0xc5/0x150
ext4_put_io_end+0x82/0x130
ext4_writepages+0xae7/0x16f0
do_writepages+0x64/0x120
__writeback_single_inode+0x7d/0x650
writeback_sb_inodes+0x3a4/0x860
__writeback_inodes_wb+0xc4/0x150
wb_writeback+0x43f/0x510
wb_workfn+0x3b2/0x8a0
process_one_work+0x39b/0x7e0
worker_thread+0x88/0x650
kthread+0x1d4/0x1f0
ret_from_fork+0x35/0x40
The plain read is outside of inode->i_data_sem critical section
which results in a data race. Fix it by adding READ_ONCE().
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Link: https://lore.kernel.org/r/1582556566-3909-1-git-send-email-hqjagain@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df8e34ac27 ]
[why]
When combining two or more pipes in DSC mode, there will always be more
than 1 slice per line. In this case, as per DSC rules, the sink device
is expecting that the ICH is reset at the end of each slice line (i.e.
ICH_RESET_AT_END_OF_LINE must be configured based on the number of
slices at the output of ODM). It is recommended that software set
ICH_RESET_AT_END_OF_LINE = 0xF for each DSC in the ODM combine. However
the current code only set ICH_RESET_AT_END_OF_LINE = 0xF when number of
slice per DSC engine is greater than 1 instead of number of slice per
output after ODM combine.
[how]
Add is_odm in dsc config. Set ICH_RESET_AT_END_OF_LINE = 0xF if either
is_odm or number of slice per DSC engine is greater than 1.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4b78169e3 ]
The last jump to free_exit in mm_iommu_do_alloc() happens after page
pointers in struct mm_iommu_table_group_mem_t were already converted to
physical addresses. Thus calling put_page() on these physical addresses
will likely crash.
This moves the loop which calculates the pageshift and converts page
struct pointers to physical addresses later after the point when
we cannot fail; thus eliminating the need to convert pointers back.
Fixes: eb9d7a62c3 ("powerpc/mm_iommu: Fix potential deadlock")
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191223060351.26359-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cbbc3a0ee ]
While unlikely the divisor in scale64_check_overflow() could be >= 32bit in
scale64_check_overflow(). do_div() truncates the divisor to 32bit at least
on 32bit platforms.
Use div64_u64() instead to avoid the truncation to 32-bit.
[ tglx: Massaged changelog ]
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200120100523.45656-1-wenyang@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08bb4da901 ]
Some controllers have been observed to send zero'd events under some
conditions. This change guards against this condition as well as adding
a trace to facilitate diagnosability of this condition.
Signed-off-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3ea410cac ]
Josef reported that his old-and-good Plextor ConvertX M402U video
converter spews lots of WARNINGs on the recent kernels, and it turned
out that the device uses a bulk endpoint for interrupt handling just
like 2250 board.
For fixing it, generalize the check with the proper verification of
the endpoint instead of hard-coded board type check.
Fixes: 7e5219d18e ("[media] go7007: Fix 2250 urb type")
Reported-and-tested-by: Josef Möllers <josef.moellers@suse.com>
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1162583
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206427
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1919b42ca4 ]
In tx_wait_done the ipc payload is copied before the DSP transaction
error code is checked. This might lead to corrupted data in kernel side
even though the error would be handled later. It is also pointless to
copy the data in case of error. So change the order of error check and
copy.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Link: https://lore.kernel.org/r/20200228231850.9226-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6dd255bdd ]
Some released ACPI FW for Huawei boards describes incorrect the port IO
address range for child devices, in that it tells us the IO port max range
is 0x3fff for each child device, which is not correct. The address range
should be [e4:e8) or similar. With this incorrect upper range, the child
device IO port resources overlap.
As such, the kernel thinks that the LPC host serial device is a child of
the IPMI device:
root@(none)$ more /proc/ioports
[...]
00ffc0e3-00ffffff : hisi-lpc-ipmi.0.auto
00ffc0e3-00ffc0e3 : ipmi_si
00ffc0e4-00ffc0e4 : ipmi_si
00ffc0e5-00ffc0e5 : ipmi_si
00ffc2f7-00ffffff : serial8250.1.auto
00ffc2f7-00ffc2fe : serial
root@(none)$
They should both be siblings. Note that these are logical PIO addresses,
which have a direct mapping from the FW IO port ranges.
This shows up as a real issue when we enable CONFIG_KASAN and
CONFIG_DEBUG_TEST_DRIVER_REMOVE - we see use-after-free warnings in the
host removal path:
==================================================================
BUG: KASAN: use-after-free in release_resource+0x38/0xc8
Read of size 8 at addr ffff0026accdbc38 by task swapper/0/1
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc6-00001-g68e186e77b5c-dirty #1593
Hardware name: Huawei Taishan 2180 /D03, BIOS Hisilicon D03 IT20 Nemo 2.0 RC0 03/30/2018
Call trace:
dump_backtrace+0x0/0x290
show_stack+0x14/0x20
dump_stack+0xf0/0x14c
print_address_description.isra.9+0x6c/0x3b8
__kasan_report+0x12c/0x23c
kasan_report+0xc/0x18
__asan_load8+0x94/0xb8
release_resource+0x38/0xc8
platform_device_del.part.10+0x80/0xe0
platform_device_unregister+0x20/0x38
hisi_lpc_acpi_remove_subdev+0x10/0x20
device_for_each_child+0xc8/0x128
hisi_lpc_acpi_remove+0x4c/0xa8
hisi_lpc_remove+0xbc/0xc0
platform_drv_remove+0x3c/0x68
really_probe+0x174/0x548
driver_probe_device+0x7c/0x148
device_driver_attach+0x94/0xa0
__driver_attach+0xa4/0x110
bus_for_each_dev+0xe8/0x158
driver_attach+0x30/0x40
bus_add_driver+0x234/0x2f0
driver_register+0xbc/0x1d0
__platform_driver_register+0x7c/0x88
hisi_lpc_driver_init+0x18/0x20
do_one_initcall+0xb4/0x258
kernel_init_freeable+0x248/0x2c0
kernel_init+0x10/0x118
ret_from_fork+0x10/0x1c
...
The issue here is that the kernel created an incorrect parent-child
resource dependency between two devices, and references the false parent
node when deleting the second child device, when it had been deleted
already.
Fix up the child device resources from FW to create proper IO port
resource relationships for broken FW.
With this, the IO port layout looks more healthy:
root@(none)$ more /proc/ioports
[...]
00ffc0e3-00ffc0e7 : hisi-lpc-ipmi.0.auto
00ffc0e3-00ffc0e3 : ipmi_si
00ffc0e4-00ffc0e4 : ipmi_si
00ffc0e5-00ffc0e5 : ipmi_si
00ffc2f7-00ffc2ff : serial8250.1.auto
00ffc2f7-00ffc2fe : serial
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gabriel Ravier