Commit graph

8 commits

Author SHA1 Message Date
Linus Walleij b0161caa72 ARM: S3C[24|64]xx: move includes back under <mach/> scope
When refactoring and breaking out the includes for the
machine-specific GPIO configuration, two files were created
in <linux/platform_data/gpio-samsung-s3c[24|64]xx.h>, but as
that namespace shall be used for defining data exchanged
between machines and drivers, using it for these broad macros
and config settings is wrong.

Move the headers back into the machine-local
<mach/gpio-samsung.h> file and think about the next step.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-14 15:24:06 +01:00
Linus Walleij 41c3548e6d ARM: s3c64xx: get rid of custom <mach/gpio.h>
This isolates the custom S3C64xx GPIO definition table to
<linux/platform_data/gpio-samsung-s3x64xx.h> as this is
used in a few different places in the kernel, removing the
need to depend on the implicit inclusion of <mach/gpio.h>
from <linux/gpio.h> and thus getting rid of a few nasty
cross-dependencies.

Also delete the CONFIG_SAMSUNG_GPIO_EXTRA stuff. Instead
roof the number of GPIOs for this platform:
First sum up all the GPIO banks from A to Q: 187 GPIOs.
Add the 16 "board GPIOs" and the roof for SAMSUNG_GPIO_EXTRA,
128, so in total maximum 187+16+128 = 331 GPIOs, so let's
take the same roof as for S3C24XX: 512. This way we can do
away with the GPIO calculation macros for GPIO_BOARD_START,
BOARD_NR_GPIOS and the definition of ARCH_NR_GPIOS.

Cc: Mark Brown <broonie@kernel.org>
[on Mini6410 board]
Tested-by: Tomasz Figa <t.figa@samsung.com>
[for changes in mach-s3c64xx]
Acked-by: Tomasz Figa <t.figa@samsung.com>
Tested-by: Mark Brown <broonie@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20 18:19:36 +01:00
Ben Dooks 2a1309b493 ARM: S3C64XX: Change to using s3c_gpio_cfgrange_nopull()
Change code setting special-function and no pull-up to use
the s3c_gpio_cfgrange_nopull() wrapper.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23 11:51:37 +09:00
Ben Dooks dab30d7f80 ARM: S3C64XX: Change to using s3c_gpio_cfgall_range()
Change the code setting a range of GPIO pins' configuration and
pull state to use the recently introduced s3c_gpio_cfgall_range().

Mop up a few missed s3c_gpio_cfgpin_range() changes.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
[kgene.kim@samsung.com: Fix small comments]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23 11:50:05 +09:00
Ben Dooks 2618b555d2 ARM: S3C64XX: Change to using s3c_gpio_cfgpin_range()
Change the code setting ranges of GPIO pins using s3c_gpio_cfgpin() to
use the recently introduced s3c_gpio_cfgpin_range().

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23 11:49:09 +09:00
Kukjin Kim 1c739c7f37 ARM: SAMSUNG: Fix on inclusion mach/gpio.h for Samsung SoCs
This patch fixes on inclusion <mach/gpio.h> to <linux/gpio.h>

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
2010-08-06 21:28:44 +09:00
Marek Szyprowski 19206b1742 ARM: SAMSUNG: Add new s3c-sdhci card detection methods for Samsung SoCs
On some Samsung SoCs not all SDHCI controllers have card detect (CD)
line. For some embedded designs it is not even needed, because ususally
the device (like SDIO flash memory or wifi controller) is permanently
wired to the controller. There are also systems which have a card detect
line connected to some of the external interrupt lines or the presence
of the card depends on some other actions (like enabling a power
regulator).

This patch adds all required changes to platform support code, so
another patch, which extends the driver with support for the new card
detection methods can be applied.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: minor title and coding-style fixes]
[kgene.kim@samsung.com: fix build errors]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-05 18:32:50 +09:00
Ben Dooks 88fc68a280 ARM: S3C64XX: Move device and device setup into mach-s3c64xx
Move the S3C64XX specific device and setup files into mach-s3c64xx as
they are unlikely to be used outside of this code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-20 22:32:01 +00:00
Renamed from arch/arm/plat-s3c64xx/setup-sdhci-gpio.c (Browse further)