Some parameters are aligned with parentheses.
Some parentheses was opened at end of line.
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the SPDX tag is in all greybus files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/staging/greybus files files with the correct SPDX
license identifier based on the license text in the file itself. The
SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Cc: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cport_quiesce() method is mandatory in the case of
the es2 Greybus hd controller to shutdown the cports on
the es2 controller.
In order to add support of another controller which may not
need to shutdown its cports, make the cport_quiesce() optional,
and check if the controller implement it before to use it.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add sanity checks for cport_quiesce and cport_clear before invoking the
callbacks as these function pointers are not required during the host
device registration. This follows the logic implemented elsewhere for
various other function pointers.
Signed-off-by: Jason Hrycay <jhrycay@gmail.com>
Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement the new connection setup and tear-down sequences for control
connections and bundle connections (offloaded and non-offloaded).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The host-device cport_ping callback expects the AP side cport id, but
was incorrectly passed the interface cport id.
Note that no host-device driver currently implements this callback, and
that it is soon even to be removed.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Connection tear down is being reworked, and the SVC quiescing operation
is going away.
Let's remove this operation now along with the coupled second ping from
our intermediate tear down implementation.
This both avoids unnecessary noise in the logs resulting from the fact
that the SVC side of the quiescing operation was never merged, and
speeds up connection tear down slightly.
Testing done: Tested on EVT2 using runtime PM.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This hack is not necessary anymore since the firmware is now able to
handle correctly (dis)connect{ed,ing} operations on the CDSI CPort.
Testing Done: Checked that I could start the camera app several time
and got the preview each time.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Alex Elder <elder@linaro.org>
This reverts commit b022fd95108e8b9d202532a74d39e86152bc8f7f.
Someone decided that all use of spin_lock_irq was to be considered a bug
and went on a search-and-replace type "bug-fixing" spree last week.
This is however just plain wrong. Using spin_lock_irq is perfectly fine
in paths were interrupts have not been disabled, and this is in fact
even preferred over the lazy approach of always using spin_lock_irqsave
instead of understanding the code that is being written or modified.
All current uses of spin_lock_irq have already been vetted in this
respect. Also note that it is only used in functions that may sleep,
that is, in functions that must not be called with interrupts disabled
in the first place.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This reverts commit 426237c515b42b9f06d9a2b1021a6d2c4d440c51.
Someone decided that all use of spin_lock_irq was to be considered a bug
and went on a search-and-replace type "bug-fixing" spree last week.
This is however just plain wrong. Using spin_lock_irq is perfectly fine
in paths were interrupts have not been disabled, and this is in fact
even preferred over the lazy approach of always using spin_lock_irqsave
instead of understanding the code that is being written or modified.
All current uses of spin_lock_irq have already been vetted in this
respect. Also note that it is only used in functions that may sleep,
that is, in functions that must not be called with interrupts disabled
in the first place.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add connection flag to indicate that a connection has high priority.
For the SVC and control connections this may be used by the host-device
driver as a hint to allocate dedicated DMA channels or to use polling to
avoid message congestion.
We also allow drivers to set this flag on their connections, even though
we currently have no use case for this (and the host-device driver is
again free to ignore it).
Note that this mechanism can be used to indicate also high-bandwidth
connections (e.g. wanting larger buffers or dedicated endpoints), but
that that should be done using a separate high-bandwidth flag rather
than overloading the high-priority flag.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Prevent drivers from specifying core flags (currently only
GB_CONNECTION_FLAG_CONTROL) when creating connections.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add a flag argument to the host-device cport_enable callback that can be
used to provide hints about the connection being created (e.g.
connection priority).
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We know that it is a bad idea to explicitly enable IRQs when we don't
don't know if they were already off before we disabled, so switch to the
save _irqsave and _irqrestore functions.
Ultimately, we need to review places in the Greybus drivers where IRQs
are disabled and remove unnecessary instances. This is only an interim
step.
This code will never run from hard irq context, as it is already taking
mutex in the path.
Testing done: booted EVT2.0, ran suspend/resume test app with a period
of 20s for a few dozen cycles.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
spin_[un]lock_irq() routines should be used carefully as they things can
go wrong, if they are mixed with spin_lock_irqsave() or other variants.
The main problem is that spin_[un]lock_irq() routines doesn't check if
the IRQs are already disabled/enabled on the local CPU and so
spin_unlock_irq() will forcefully enable interrupts for example.
This may not work well, if some other code was relying on interrupts
being disabled.
Use spin_lock_irqsave() and spin_unlock_restore() instead.
This patch doesn't claim that it fixes the JIRA completely, but
the issue was harder to reproduce for some iterations after this, which
was quite easy to reproduce earlier on.
Tested on EVT 2.0 with lots of debug patches to kernel and greybus.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
spin_[un]lock_irq() routines should be used carefully as they things can
go wrong, if they are mixed with spin_lock_irqsave() or other variants.
The main problem is that spin_[un]lock_irq() routines doesn't check if
the IRQs are already disabled/enabled on the local CPU and so
spin_unlock_irq() will forcefully enable interrupts for example.
This may not work well, if some other code was relying on interrupts
being disabled.
Use spin_lock_irqsave() and spin_unlock_restore() instead.
This patch doesn't claim that it fixes the JIRA completely, but
the issue was harder to reproduce for some iterations after this, which
was quite easy to reproduce earlier on.
Tested on EVT 2.0 with lots of debug patches to kernel and greybus.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This is what we are doing elsewhere:
- Send enable/create trace events after enabling/creating stuff.
- Send disable/remove trace events before disabling/removing stuff.
This wasn't followed in a same way while disabling connections. Fix it.
Compile tested.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This is used only to check if an existing connection already uses the
cport_id or not and doesn't really need to return pointer to the
connection.
While at it, also rename it to suit its purpose.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch removes few blank lines across the repository at places where
two blank lines were present together or when a blank line is present at
the start or end of a routine.
Note that this doesn't remove most of them from greybus_protocols.h as
they were added on purpose.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Some line breaks weren't required as we never crossed 80 columns, remove
them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Bryan reports he used certain message traces to determine when time
sync messages transit the boundary between the Greybus core and the
host device. This patch adds two trace events--one a message event
for outbound messages (because it indicates its operation and its
destination), and one host device event for incoming messages
(because message information isn't available as early as desired).
These events are being created to allow the same sort of analysis
of messages without having to store extra information for every
message trace. (The next patch changes the information a message
trace records.)
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Define a new gb_connection trace point event class, used to trace
events associated with the connection abstraction. Define four basic
trace events for this--creation, drop of last reference, and when
adding or dropping any other reference. There are certainly
more events that we might want to add, but aim is to just get the
basic framework in place.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add a generic interface for bundle drivers to use to request that a
mode switch is carried out on its behalf.
Mode switching involves tearing down all connections to an interface,
sending a unidirectional mode-switch request, and waiting for a mailbox
event that triggers deferred control connection reset and re-enumeration
of the interface. In case of a timeout waiting for the interface mailbox
event, or on other errors, the interface is powered off.
All of this needs to be done by core from work-queue context in order
not to block incoming SVC requests and bundle-device tear down. Care
must also be taken to serialise against concurrent module removal events
and eject requests.
Special handling of legacy mode-switching is also added in order to
continue to support the ES3 bootrom.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add a new host-device callback to flush any host-device queues,
including any ongoing transfers, as part of connection tear down.
The host-device buffers are flushed after the disconnecting operation
have completed and the AP queues have been emptied.
This can be used to flush already queued messages which upon reception
would have been discarded by the remote end anyway.
Note that this does not remove the need to flush any host-device queues
as part of CPort disable which needs to make the CPort ready for reuse
after deallocating all associated state and resetting the port.
Suggested-by: Mitchell Tasman <tasman@leaflabs.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Implement proper connection closure, which includes sending ping
requests on the connection being tore down while coordinating with the
remote interface as well as the SVC.
This specifically implements the new ping operation, which in case of
offloaded connections is handled by the host-device driver in an
implementation-defined manner through a new callback.
Note that the normal connection tear-down procedure is executed in case
of failed connection establishment due to failed connected operation.
Specifically, the disconnecting request is sent also in case the
connected operation never succeeded. This is needed since the interface
may have enabled FCT flow upon receiving the connected request.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The CPort Buffer configuration in the host-device needs to match the
CPort feature flags set by the SVC, but they need not always be
configured at the same point in time.
This will be used when implementing proper connection tear down.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Rename an error label to make it more descriptive.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Log failures to disable a host cport, and include the connection name in
cport enable/disable error messages.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add control connection flag which will be set for control connections.
Also add a helper function to test if the flag is set.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add new helper to disable connections to interfaces that have already
been disconnected (e.g. forcibly removed).
The connection tear-down procedure differs enough depending on whether
the interface is still present or already gone to warrant a dedicated
helper. This will become more obvious with the new tear-down procedure,
which involves I/O on the connection being tore down.
This also simplifies handling of the legacy bootrom, which does not
support the new tear-down operations.
Specifically, this allows us to remove the early control-connection
tear down during interface disable, and also avoids some error messages
currently printed during legacy mode switch (i.e. bootrom
boot-over-UniPro) and forcible removal.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
A connection must be in DISABLED state before it gets destroyed.
Warn if this is ever not the case (and do the disconnect) before
proceeding with connection destruction.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Firmware currently lacks a representation of the offloaded CDSI
connections and connected requests sent for these ports therefore fails.
Add a temporary work-around until this has been resolved in firmware.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Generalise CPort allocation by allowing host-device drivers to override
the default implementation.
Also pass the connection flags down the stack as such information is
needed for proper CPort allocation. Specifically, this will initially be
used to allow the camera driver to allocate the dedicated CDSI CPorts.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Move host-device CPort allocation to the host-device code.
Proper CPort allocation requires knowledge of the hardware and must be
handled by the host-device driver. This is an intermediate step that
moves the generic CPort-allocation code to the host-device code.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add helper for creating offloaded connection.
This can later be extended to support more elaborate resource
management.
Also fix a minor white space issue.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add a no-flow-control connection flag, which is set for connection that
should not have any flow-control feature enabled.
This flag is specifically set for all connections to the legacy ES3
bootrom, and will also be used by the camera driver eventually.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
gb_connection_disable_rx() fn is required to be used by other modules
(e.g. bridged-phy drivers) and so export it.
Testing Done: Tested on gbsim.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Clean up handling of the ES3-bootrom quirks by adding an interface
quirk-flags field that is set appropriately when we detect that the ES3
bootrom is running.
Note that we need to reserve the DME_DIS_UNIPRO_BOOT_STARTED and
DME_DIS_FALLBACK_UNIPRO_BOOT_STARTED status values for the ES3 bootrom,
which does not support any CPort features (unlike later boot stages).
Add a BOOTROM infix to the defines to make this more clear.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Rename the CPort-features callbacks, that are not just used to enable
FCT flow, to the more descriptive cport_features_enable/disable.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add CSD connection flag that can be specified when allocating a
connection to enable Controlled Segment Dropping in favour of E2EFC
which is enabled by default.
Note that most connections are expected to have E2EFC enabled.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Generalise the svc connection-create helper to accept a cport-flags
argument and handle the flags in the connection code instead.
Note that the camera driver currently manages its data connection
directly. We keep E2EFC enabled for now even though it will soon need
to be disabled due to some pending firmware updates.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add interface for associating a flag bitmask with a connection when
creating it.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The AP must enable the FCT flow of APBA once it has received the response
from the AP that the connection between APBA and a module has been setted up.
Disable the flow of FCT tokens when destroying connections.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In order to support mailbox-free control cport init on the bridges the AP must
be able to enable/disable the flow of unipro fct tokens. Add a new API that
will enable or disable on APBA the flow of fct tokens.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The callers ensures that connection->lock is taken before calling few
routines, but that isn't enough for sparse as it sees an unexpected
unlock.
greybus/connection.c:380:29: warning: context imbalance in 'gb_connection_cancel_operations' - unexpected unlock
Fix that adding __must_lock() attribute to the function declaration.
This also adds the attribute for
gb_connection_flush_incoming_operations(), which isn't showing any
sparse warnings with the current state of code, but with minor
rearrangements of the code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Set the connection request handler at creation rather than when enabling
the connection.
This is possible now that connections are created by the drivers that
use them rather than by core at manifest parsing time.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Return an ERR_PTR on errors when creating connections.
This allows driver probe to fail with a more informative error message
as not all connection creation errors are due to memory exhaustion.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
