virtio-mem
doorbell mapping for vdpa
config interrupt support in ifc
fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl7fZ6APHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpkDoIAMcBcQx5su1iuX7vT35xzUWZO478eAf1jOMZ
7KxKUVBeztkcxVFUlRVRu9MR6wOzwHils+1HD6025775Smr5M6x3aJxR6xOORaBj
RoU6OVGkpDvbzsxlhW+xhONz4O7/RkveKJPCwzGjqHrsFeh92lkfTqroz/EuNpw+
LZsO0+DhdUf123HbwHQp5lxW8EjyrRabgeZZg/D9VLPhoCP88vCjRhBXU2GPuaUl
/UNXsQafn4xUgrxPaoN5f4Phn/P46NNrbZ1jmlkw/z/3QhF/DhktGXGaZsIHDCN/
vicUii0or5QLeBsZpMbKko/BIe2xWHxFjkMRhMOMZOfcBb6sMBI=
=auUa
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- virtio-mem: paravirtualized memory hotplug
- support doorbell mapping for vdpa
- config interrupt support in ifc
- fixes all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (40 commits)
vhost/test: fix up after API change
virtio_mem: convert device block size into 64bit
virtio-mem: drop unnecessary initialization
ifcvf: implement config interrupt in IFCVF
vhost: replace -1 with VHOST_FILE_UNBIND in ioctls
vhost_vdpa: Support config interrupt in vdpa
ifcvf: ignore continuous setting same status value
virtio-mem: Don't rely on implicit compiler padding for requests
virtio-mem: Try to unplug the complete online memory block first
virtio-mem: Use -ETXTBSY as error code if the device is busy
virtio-mem: Unplug subblocks right-to-left
virtio-mem: Drop manual check for already present memory
virtio-mem: Add parent resource for all added "System RAM"
virtio-mem: Better retry handling
virtio-mem: Offline and remove completely unplugged memory blocks
mm/memory_hotplug: Introduce offline_and_remove_memory()
virtio-mem: Allow to offline partially unplugged memory blocks
mm: Allow to offline unmovable PageOffline() pages via MEM_GOING_OFFLINE
virtio-mem: Paravirtualized memory hotunplug part 2
virtio-mem: Paravirtualized memory hotunplug part 1
...
Pull networking fixes from David Miller:
- Fix the build with certain Kconfig combinations for the Chelsio
inline TLS device, from Rohit Maheshwar and Vinay Kumar Yadavi.
- Fix leak in genetlink, from Cong Lang.
- Fix out of bounds packet header accesses in seg6, from Ahmed
Abdelsalam.
- Two XDP fixes in the ENA driver, from Sameeh Jubran
- Use rwsem in device rename instead of a seqcount because this code
can sleep, from Ahmed S. Darwish.
- Fix WoL regressions in r8169, from Heiner Kallweit.
- Fix qed crashes in kdump mode, from Alok Prasad.
- Fix the callbacks used for certain thermal zones in mlxsw, from Vadim
Pasternak.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
net: dsa: lantiq_gswip: fix and improve the unsupported interface error
mlxsw: core: Use different get_trend() callbacks for different thermal zones
net: dp83869: Reset return variable if PHY strap is read
rhashtable: Drop raw RCU deref in nested_table_free
cxgb4: Use kfree() instead kvfree() where appropriate
net: qed: fixes crash while running driver in kdump kernel
vsock/vmci: make vmci_vsock_transport_cb() static
net: ethtool: Fix comment mentioning typo in IS_ENABLED()
net: phy: mscc: fix Serdes configuration in vsc8584_config_init
net: mscc: Fix OF_MDIO config check
net: marvell: Fix OF_MDIO config check
net: dp83867: Fix OF_MDIO config check
net: dp83869: Fix OF_MDIO config check
net: ethernet: mvneta: fix MVNETA_SKB_HEADROOM alignment
ethtool: linkinfo: remove an unnecessary NULL check
net/xdp: use shift instead of 64 bit division
crypto/chtls:Fix compile error when CONFIG_IPV6 is disabled
inet_connection_sock: clear inet_num out of destroy helper
yam: fix possible memory leak in yam_init_driver
lan743x: Use correct MAC_CR configuration for 1 GBit speed
...
Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzkHw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yldOwCgus/DgpnI1UL4z+NdBxJrAXtkPmgAn2sgTUea
i5RblCmcVMqvHaGtYkY+
=tScN
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to make it
safe against parallel page table manipulations without relying on an IPI for
serialisation.
- A series of fixes & enhancements to make our machine check handling more
robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions on
Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
Sang, Xiongfeng Wang.
-----BEGIN PGP SIGNATURE-----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=o0WU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
Fix compile errors,warnings when CONFIG_IPV6 is disabled and
inconsistent indenting.
v1->v2:
- Corrected errors/warnings reported when used newer gcc version,
unused array.
Fixes: 6abde0b241 ("crypto/chtls: IPv6 support for inline TLS")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The src/dst length is not aligned with AES_BLOCK_SIZE(which is 16) in some
testcases in tcrypto.ko.
For example, the src/dst length of one of cts(cbc(aes))'s testcase is 17, the
crypto_virtio driver will set @src_data_len=16 but @dst_data_len=17 in this
case and get a wrong at then end.
SRC: pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp pp (17 bytes)
EXP: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc pp (17 bytes)
DST: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 00 (pollute the last bytes)
(pp: plaintext cc:ciphertext)
Fix this issue by limit the length of dest buffer.
Fixes: dbaf0624ff ("crypto: add virtio-crypto driver")
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20200602070501.2023-4-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The system'll crash when the users insmod crypto/tcrypto.ko with mode=155
( testing "authenc(hmac(sha1),cbc(aes))" ). It's caused by reuse the memory
of request structure.
In crypto_authenc_init_tfm(), the reqsize is set to:
[PART 1] sizeof(authenc_request_ctx) +
[PART 2] ictx->reqoff +
[PART 3] MAX(ahash part, skcipher part)
and the 'PART 3' is used by both ahash and skcipher in turn.
When the virtio_crypto driver finish skcipher req, it'll call ->complete
callback(in crypto_finalize_skcipher_request) and then free its
resources whose pointers are recorded in 'skcipher parts'.
However, the ->complete is 'crypto_authenc_encrypt_done' in this case,
it will use the 'ahash part' of the request and change its content,
so virtio_crypto driver will get the wrong pointer after ->complete
finish and mistakenly free some other's memory. So the system will crash
when these memory will be used again.
The resources which need to be cleaned up are not used any more. But the
pointers of these resources may be changed in the function
"crypto_finalize_skcipher_request". Thus release specific resources before
calling this function.
Fixes: dbaf0624ff ("crypto: add virtio-crypto driver")
Reported-by: LABBE Corentin <clabbe@baylibre.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200123101000.GB24255@Red
Acked-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20200602070501.2023-3-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The system will crash when the users insmod crypto/tcrypt.ko with mode=38
( testing "cts(cbc(aes))" ).
Usually the next entry of one sg will be @sg@ + 1, but if this sg element
is part of a chained scatterlist, it could jump to the start of a new
scatterlist array. Fix it by sg_next() on calculation of src/dst
scatterlist.
Fixes: dbaf0624ff ("crypto: add virtio-crypto driver")
Reported-by: LABBE Corentin <clabbe@baylibre.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200123101000.GB24255@Red
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20200602070501.2023-2-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
Pull uaccess/access_ok updates from Al Viro:
"Removals of trivially pointless access_ok() calls.
Note: the fiemap stuff was removed from the series, since they are
duplicates with part of ext4 series carried in Ted's tree"
* 'uaccess.access_ok' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vmci_host: get rid of pointless access_ok()
hfi1: get rid of pointless access_ok()
usb: get rid of pointless access_ok() calls
lpfc_debugfs: get rid of pointless access_ok()
efi_test: get rid of pointless access_ok()
drm_read(): get rid of pointless access_ok()
via-pmu: don't bother with access_ok()
drivers/crypto/ccp/sev-dev.c: get rid of pointless access_ok()
omapfb: get rid of pointless access_ok() calls
amifb: get rid of pointless access_ok() calls
drivers/fpga/dfl-afu-dma-region.c: get rid of pointless access_ok()
drivers/fpga/dfl-fme-pr.c: get rid of pointless access_ok()
cm4000_cs.c cmm_ioctl(): get rid of pointless access_ok()
nvram: drop useless access_ok()
n_hdlc_tty_read(): remove pointless access_ok()
tomoyo_write_control(): get rid of pointless access_ok()
btrfs_ioctl_send(): don't bother with access_ok()
fat_dir_ioctl(): hadn't needed that access_ok() for more than a decade...
dlmfs_file_write(): get rid of pointless access_ok()
Extends support to IPv6 for Inline TLS server.
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
v1->v2:
- cc'd tcp folks.
v2->v3:
- changed EXPORT_SYMBOL() to EXPORT_SYMBOL_GPL()
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes an error observed after running coccinile check.
drivers/crypto/chelsio/chcr_algo.c:1462:5-8: Unneeded variable:
"err". Return "0" on line 1480
This line is missed in the commit 567be3a5d2 ("crypto:
chelsio - Use multiple txq/rxq per tfm to process the requests").
Fixes: 567be3a5d2 ("crypto:
chelsio - Use multiple txq/rxq per tfm to process the requests").
V1->V2
-Modified subject.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the compilation warnings displayed by sparse tool for
chcr driver.
V1->V2
Avoid type casting by using get_unaligned_be32() and
put_unaligned_be16/32() functions.
The key which comes from stack is an u8 byte stream so we store it in
an unsigned char array(ablkctx->key). The function get_aes_decrypt_key()
is a used to calculate the reverse round key for decryption, for this
operation the key has to be divided into 4 bytes, so to extract 4 bytes
from an u8 byte stream and store it in an u32 variable, get_aligned_be32()
is used. Similarly for copying back the key from u32 variable to the
original u8 key stream, put_aligned_be32() is used.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Error messages seen while building kernel with CONFIG_IPV6
disabled.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current design enables ktls setting from start, which is not
efficient. Now the feature will be enabled when user demands
TLS offload on any interface.
v1->v2:
- taking ULD module refcount till any single connection exists.
- taking rtnl_lock() before clearing tls_devops.
v2->v3:
- cxgb4 is now registering to tlsdev_ops.
- module refcount inc/dec in chcr.
- refcount is only for connections.
- removed new code from cxgb_set_feature().
v3->v4:
- fixed warning message.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
set from Mauro toward the completion of the RST conversion. I *really*
hope we are getting close to the end of this. Meanwhile, those patches
reach pretty far afield to update document references around the tree;
there should be no actual code changes there. There will be, alas, more of
the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots of
fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd
bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7
+NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR
RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm
SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz
oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw=
=fDC/
-----END PGP SIGNATURE-----
Merge tag 'docs-5.8' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
Pull crypto updates from Herbert Xu:
"API:
- Introduce crypto_shash_tfm_digest() and use it wherever possible.
- Fix use-after-free and race in crypto_spawn_alg.
- Add support for parallel and batch requests to crypto_engine.
Algorithms:
- Update jitter RNG for SP800-90B compliance.
- Always use jitter RNG as seed in drbg.
Drivers:
- Add Arm CryptoCell driver cctrng.
- Add support for SEV-ES to the PSP driver in ccp"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits)
crypto: hisilicon - fix driver compatibility issue with different versions of devices
crypto: engine - do not requeue in case of fatal error
crypto: cavium/nitrox - Fix a typo in a comment
crypto: hisilicon/qm - change debugfs file name from qm_regs to regs
crypto: hisilicon/qm - add DebugFS for xQC and xQE dump
crypto: hisilicon/zip - add debugfs for Hisilicon ZIP
crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE
crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC
crypto: hisilicon/qm - add debugfs to the QM state machine
crypto: hisilicon/qm - add debugfs for QM
crypto: stm32/crc32 - protect from concurrent accesses
crypto: stm32/crc32 - don't sleep in runtime pm
crypto: stm32/crc32 - fix multi-instance
crypto: stm32/crc32 - fix run-time self test issue.
crypto: stm32/crc32 - fix ext4 chksum BUG_ON()
crypto: hisilicon/zip - Use temporary sqe when doing work
crypto: hisilicon - add device error report through abnormal irq
crypto: hisilicon - remove codes of directly report device errors through MSI
crypto: hisilicon - QM memory management optimization
crypto: hisilicon - unify initial value assignment into QM
...
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
Contrary to the comments, those do *NOT* verify anything about
writability of memory, etc.
In all cases addresses are passed only to copy_to_user().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In order to be compatible with devices of different versions, V1 in the
accelerator driver is now isolated, and other versions are the previous
V2 processing flow.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
TCP tp->lsndtime unit/base is tcp_jiffies32, not tcp_time_stamp()
Fixes: 36bedb3f2e ("crypto: chtls - Inline TLS record Tx")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ayush Sawal <ayush.sawal@chelsio.com>
Cc: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The debugfs qm_regs file is already in the qm directory, so no qm_ prefix
is required.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add dump information of SQC/CQC/EQC/AEQC/SQE/CQE/EQE/AEQE.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hisilicon ZIP engine driver uses debugfs
to provides IO operation debug information
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add debugfs to provides IO operation debug information
and add BD processing timeout count function
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hisilicon SEC engine driver uses debugfs
to provides IO operation debug information
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The QM driver uses debugfs to provides the current state of
the QM state machine
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add DebugFS method to get the information of IRQ/Requests/QP .etc of QM
for HPRE/ZIP/SEC drivers.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Protect STM32 CRC device from concurrent accesses.
As we create a spinlocked section that increase with buffer size,
we provide a module parameter to release the pressure by splitting
critical section in chunks.
Size of each chunk is defined in burst_size module parameter.
By default burst_size=0, i.e. don't split incoming buffer.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ensure stm32_crc_update() and stm32_crc_init() can be called
in atomic context and can't sleep.
Add pm_runtime_irq_safe() to make pm_runtime_get_sync() atomic.
Change runtime pm to call clk_enable()/clk_disable() and change
system pm to unprepare/prepare the clock and force runtime pm
suspend/resume.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ensure CRC algorithm is registered only once in crypto framework when
there are several instances of CRC devices.
Update the CRC device list management to avoid that only the first CRC
instance is used.
Fixes: b51dbe9091 ("crypto: stm32 - Support for STM32 CRC32 crypto module")
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix wrong crc32 initialisation value:
"alg: shash: stm32_crc32 test failed (wrong result) on test vector 0,
cfg="init+update+final aligned buffer"
cra_name="crc32c" expects an init value of 0XFFFFFFFF,
cra_name="crc32" expects an init value of 0.
Fixes: b51dbe9091 ("crypto: stm32 - Support for STM32 CRC32 crypto module")
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow use of crc_update without prior call to crc_init.
And change (and fix) driver to use CRC device even on unaligned buffers.
Fixes: b51dbe9091 ("crypto: stm32 - Support for STM32 CRC32 crypto module")
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently zip sqe is stored in hisi_zip_qp_ctx, which will bring corruption
with multiple parallel users of the crypto tfm.
This patch removes the zip_sqe in hisi_zip_qp_ctx and uses a temporary sqe
instead.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
By configuring the device error in firmware to report through abnormal
interruption, process all NFE errors in irq handler.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware device can be configured to report directly through MSI, but
this method will not go through RAS, configure all hardware errors that
should be processed by driver to NFE.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Put all the code for the memory allocation into the QM initialization
process. Before, The qp memory was allocated when the qp was created,
and released when the qp was released, It is now changed to allocate
all the qp memory once.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some initial value assignment of struct hisi_qm could put into QM.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The codes related use_dma_api is useless which should be removed.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add callback reset_prepare and reset_done in QM, The callback
reset_prepare will uninit device error configuration and stop
the QM, the callback reset_done will init the device error
configuration and restart the QM.
Uninit the error configuration will disable device block master OOO
when Multi-bit ECC error occurs to avoid the request of FLR will not
return.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add specific states for qm and qp, every state change under critical region
to prevent from race condition. Meanwhile, qp state change will also depend
on qm state.
Due to the introduction of these states, it is necessary to pay attention
to the calls of public logic, such as concurrent scenarios resetting and
releasing queue will call hisi_qm_stop, which needs to add additional
status to distinguish and process.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
put q_num_set similar code into qm to reduce the redundancy.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Misc fixes on coding style:
1.Merge QM initialization code into a function
2.Merge QM's PF and VF initialization into a function
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Misc fixes on coding style:
1.Merge pre-initialization and initialization of QM
2.Package the initialization of QM's PF and VF into a function
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adjust the position of SMMU status check and
SEC queue initialization in SEC probe
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sec_dfx_regs is never changed and can therefore be made const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
17982 7312 480 25774 64ae drivers/crypto/hisilicon/sec2/sec_main.o
After:
text data bss dec hex filename
18366 6928 480 25774 64ae drivers/crypto/hisilicon/sec2/sec_main.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hzip_dfx_regs is never changed and can be made const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
15236 6160 480 21876 5574 drivers/crypto/hisilicon/zip/zip_main.o
After:
text data bss dec hex filename
15620 5776 480 21876 5574 drivers/crypto/hisilicon/zip/zip_main.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hpre_cluster_dfx_regs and hpre_com_dfx_regs are never changed and can
therefore be made const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
16455 6288 480 23223 5ab7 drivers/crypto/hisilicon/hpre/hpre_main.o
After:
text data bss dec hex filename
16839 5904 480 23223 5ab7 drivers/crypto/hisilicon/hpre/hpre_main.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pid_cd_regs and debug_regs are never changed and can therefore be made
const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
2871 2320 64 5255 1487 drivers/crypto/ccree/cc_debugfs.o
After:
text data bss dec hex filename
3255 1936 64 5255 1487 drivers/crypto/ccree/cc_debugfs.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
