commit 49d28ebdf1 upstream.
Currently in case of alignment or FCS error if the packet cannot be
corrected it's still not dropped. Report the error properly and drop the
packet while making the code around a little bit more readable.
Fixes: 80ff0fd3ab ("Staging: Add octeon-ethernet driver files.")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201016145630.41852-1-alexander.sverdlin@nokia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 179f5dc36b upstream.
The PHYs must be registered once in device probe function, not in device
open callback because it's only possible to register them once.
Fixes: a25e278020 ("staging: octeon: support fixed-link phys")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201016101858.11374-1-alexander.sverdlin@nokia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 647a6002cb upstream.
The "cb_pcidas" driver supports asynchronous commands on the analog
output (AO) subdevice for those boards that have an AO FIFO. The code
(in `cb_pcidas_ao_check_chanlist()` and `cb_pcidas_ao_cmd()`) to
validate and set up the command supports output to a single channel or
to two channels simultaneously (the boards have two AO channels).
However, the code in `cb_pcidas_auto_attach()` that initializes the
subdevices neglects to initialize the AO subdevice's `len_chanlist`
member, leaving it set to 0, but the Comedi core will "correct" it to 1
if the driver neglected to set it. This limits commands to use a single
channel (either channel 0 or 1), but the limit should be two channels.
Set the AO subdevice's `len_chanlist` member to be the same value as the
`n_chan` member, which will be 2.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20201021122142.81628-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e97e4cbf3 upstream.
In current code, controller_probe() misses to call ida_simple_remove()
in an error path. Jump to correct label to fix it.
Fixes: 17614978ed ("staging: fieldbus: anybus-s: support the Arcx anybus controller")
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201012132404.113031-1-jingxiangfeng@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a1c2c7f63 upstream.
The DBGD{CCINT,SCRext} and DBGVCR register entries in the cp14 array
are missing their target register, resulting in all accesses being
targetted at the guard sysreg (indexed by __INVALID_SYSREG__).
Point the emulation code at the actual register entries.
Fixes: bdfb4b389c ("arm64: KVM: add trap handlers for AArch32 debug registers")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201029172409.2768336-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99aed92270 upstream.
It appears that firmware nodes can be shared between devices. In such case
when a (child) device is about to be deleted, its firmware node may be shared
and ACPI_COMPANION_SET(..., NULL) call for it breaks the secondary link
of the shared primary firmware node.
In order to prevent that, check, if the device has a parent and parent's
firmware node is shared with its child, and avoid crashing the link.
Fixes: c15e1bdda4 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()")
Reported-by: Ferry Toth <fntoth@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5dcce0c41 upstream.
Behind primary and secondary we understand the type of the nodes
which might define their ordering. However, if primary node gone,
we can't maintain the ordering by definition of the linked list.
Thus, by ordering secondary node becomes first in the list.
But in this case the meaning of it is still secondary (or auxiliary).
The type of the node is maintained by the secondary pointer in it:
secondary pointer Meaning
NULL or valid primary node
ERR_PTR(-ENODEV) secondary node
So, if by some reason we do the following sequence of calls
set_primary_fwnode(dev, NULL);
set_primary_fwnode(dev, primary);
we should preserve secondary node.
This concept is supported by the description of set_primary_fwnode()
along with implementation of set_secondary_fwnode(). Hence, fix
the commit c15e1bdda4 to follow this as well.
Fixes: c15e1bdda4 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()")
Cc: Ferry Toth <fntoth@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6d7cde84f upstream.
Commit f6361c6b38 ("ARM: S3C24XX: remove separate restart code")
removed usage of the watchdog reset platform code in favor of the
Samsung SoC watchdog driver. However the latter was not selected thus
S3C24xx platforms lost reset abilities.
Cc: <stable@vger.kernel.org>
Fixes: f6361c6b38 ("ARM: S3C24XX: remove separate restart code")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7be0d19c75 upstream.
Selecting CONFIG_SAMSUNG_PM_DEBUG (depending on CONFIG_DEBUG_LL) but
without CONFIG_MMU leads to build errors:
arch/arm/plat-samsung/pm-debug.c: In function ‘s3c_pm_uart_base’:
arch/arm/plat-samsung/pm-debug.c:57:2: error:
implicit declaration of function ‘debug_ll_addr’ [-Werror=implicit-function-declaration]
Fixes: 99b2fc2b8b ("ARM: SAMSUNG: Use debug_ll_addr() to get UART base address")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200910154150.3318-1-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 879bc2d279 upstream.
When starting a HP machine with HIL driver but without an HIL keyboard
or HIL mouse attached, it may happen that data written to the HIL loop
gets stuck (e.g. because the transaction queue is full). Usually one
will then have to reboot the machine because all you see is and endless
output of:
Transaction add failed: transaction already queued?
In the higher layers hp_sdc_enqueue_transaction() is called to queued up
a HIL packet. This function returns an error code, and this patch adds
the necessary checks for this return code and disables the HIL driver if
further packets can't be sent.
Tested on a HP 730 and a HP 715/64 machine.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0fc70ce1f upstream.
Berlin SoCs always contain some DW APB timers which can be used as an
always-on broadcast timer.
Link: https://lore.kernel.org/r/20201009150536.214181fb@xhacker.debian
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90bfdeef83 upstream.
Some of the font tty ioctl's always used the current foreground VC for
their operations. Don't do that then.
This fixes a data race on fg_console.
Side note: both Michael Ellerman and Jiri Slaby point out that all these
ioctls are deprecated, and should probably have been removed long ago,
and everything seems to be using the KDFONTOP ioctl instead.
In fact, Michael points out that it looks like busybox's loadfont
program seems to have switched over to using KDFONTOP exactly _because_
of this bug (ahem.. 12 years ago ;-).
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83da6eea3a upstream.
To avoid underflow seen on Polaris10 with some 3440x1440
144Hz displays. As the threshold of 190 us cuts too close
to minVBlankTime of 192 us.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b3e1ea16fb upstream.
sdhci-of-dwcmshc meets an eMMC read performance regression with below
command after commit 427b6514d0 ("mmc: sdhci: Add Auto CMD Auto
Select support"):
dd if=/dev/mmcblk0 of=/dev/null bs=8192 count=100000
Before the commit, the above command gives 120MB/s
After the commit, the above command gives 51.3 MB/s
So it looks like sdhci-of-dwcmshc expects Version 4 Mode for Auto
CMD Auto Select. Fix the performance degradation by ensuring v4_mode
is true to use Auto CMD Auto Select.
Fixes: 427b6514d0 ("mmc: sdhci: Add Auto CMD Auto Select support")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201015174115.4cf2c19a@xhacker.debian
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0add6e9b88 upstream.
On rare occations there is the following error:
mmc0: Tuning timeout, falling back to fixed sampling clock
There are SD cards which takes a significant longer time to reply to the
first CMD19 command. The eSDHC takes the data timeout value into account
during the tuning period. The SDHCI core doesn't explicitly set this
timeout for the tuning procedure. Thus on the slow cards, there might be
a spurious "Buffer Read Ready" interrupt, which in turn triggers a wrong
sequence of events. In the end this will lead to an unsuccessful tuning
procedure and to the above error.
To workaround this, set the timeout to the maximum value (which is the
best we can do) and the SDHCI core will take care of the proper timeout
handling.
Fixes: ba49cbd093 ("mmc: sdhci-of-esdhc: add tuning support")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201022222337.19857-1-michael@walle.cc
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fea456d82c upstream.
This was adding size to start, but pfn and start are in pages,
so it should be using num_pages.
Not sure this fixes anything in the real world, just noticed it
during refactoring.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201019222257.1684769-2-airlied@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1322181170 upstream.
During the stability test, there are some errors:
ext4_lookup:1590: inode #6967: comm fsstress: iget: checksum invalid.
If the inode->i_iblocks too big and doesn't set huge file flag, checksum
will not be recalculated when update the inode information to it's buffer.
If other inode marks the buffer dirty, then the inconsistent inode will
be flushed to disk.
Fix this problem by checking i_blocks in advance.
Cc: stable@kernel.org
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20201020013631.3796673-1-luomeng12@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9e87161cc upstream.
When ext4_journal_get_write_access() fails, we should
terminate the execution flow and release n_group_desc,
iloc.bh, dind and gdb_bh.
Cc: stable@kernel.org
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20200829025403.3139-1-dinghao.liu@zju.edu.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5745bcfbbf upstream.
If riov and wiov are both defined and they point to different
objects, only riov is initialized. If the wiov is not initialized
by the caller, the function fails returning -EINVAL and printing
"Readable desc 0x... after writable" error message.
This issue happens when descriptors have both readable and writable
buffers (eg. virtio-blk devices has virtio_blk_outhdr in the readable
buffer and status as last byte of writable buffer) and we call
__vringh_iov() to get both type of buffers in two different iovecs.
Let's replace the 'else if' clause with 'if' to initialize both
riov and wiov if they are not NULL.
As checkpatch pointed out, we also avoid crashing the kernel
when riov and wiov are both NULL, replacing BUG() with WARN_ON()
and returning -EINVAL.
Fixes: f87d0fbb57 ("vringh: host-side implementation of virtio rings.")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201008204256.162292-1-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a1754b2a9 upstream.
We don't need to check the new buffer size, and the return value
had confused resize_buffer_duplicate_size().
...
ret = ring_buffer_resize(trace_buf->buffer,
per_cpu_ptr(size_buf->data,cpu_id)->entries, cpu_id);
if (ret == 0)
per_cpu_ptr(trace_buf->data, cpu_id)->entries =
per_cpu_ptr(size_buf->data, cpu_id)->entries;
...
Link: https://lkml.kernel.org/r/20201019142242.11560-1-hqjagain@gmail.com
Cc: stable@vger.kernel.org
Fixes: d60da506cb ("tracing: Add a resize function to make one buffer equivalent to another buffer")
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5f7ab168b upstream.
On 32-bit systems, this multiplication will overflow for files larger
than 4GB.
Link: http://lkml.kernel.org/r/20201004180428.14494-2-willy@infradead.org
Cc: stable@vger.kernel.org
Fixes: fb89b45cdf ("9P: introduction of a new cache=mmap model.")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28e1581c3b upstream.
con->out_msg must be cleared on Policy::stateful_server
(!CEPH_MSG_CONNECT_LOSSY) faults. Not doing so botches the
reconnection attempt, because after writing the banner the
messenger moves on to writing the data section of that message
(either from where it got interrupted by the connection reset or
from the beginning) instead of writing struct ceph_msg_connect.
This results in a bizarre error message because the server
sends CEPH_MSGR_TAG_BADPROTOVER but we think we wrote struct
ceph_msg_connect:
libceph: mds0 (1)172.21.15.45:6828 socket error on write
ceph: mds0 reconnect start
libceph: mds0 (1)172.21.15.45:6829 socket closed (con state OPEN)
libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch, my 32 != server's 32
libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch
AFAICT this bug goes back to the dawn of the kernel client.
The reason it survived for so long is that only MDS sessions
are stateful and only two MDS messages have a data section:
CEPH_MSG_CLIENT_RECONNECT (always, but reconnecting is rare)
and CEPH_MSG_CLIENT_REQUEST (only when xattrs are involved).
The connection has to get reset precisely when such message
is being sent -- in this case it was the former.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/47723
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c403c3a2fb upstream.
On 32-bit systems, this shift will overflow for files larger than 4GB.
Cc: stable@vger.kernel.org
Fixes: 61f6881621 ("ceph: check caps in filemap_fault and page_mkwrite")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 920bb38c51 upstream.
Currently both error code paths handled in dal_gpio_open_ex() issues
ASSERT_CRITICAL(), and this leads to a kernel panic unnecessarily if
CONFIG_KGDB is enabled. Since basically both are non-critical errors
and can be recovered, drop those assert calls and use a safer one,
BREAK_TO_DEBUGGER(), for allowing the debugging, instead.
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1177973
Cc: <stable@vger.kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b7dc1fe1a upstream.
ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either
CONFIG_KGDB or CONFIG_HAVE_KGDB is set. This, however, may lead to a
kernel panic when no kdb stuff is attached, since the
kgdb_breakpoint() call issues INT3. It's nothing but a surprise for
normal end-users.
For avoiding the pitfall, make the kgdb_breakpoint() call only when
CONFIG_DEBUG_KERNEL_DC is set.
https://bugzilla.opensuse.org/show_bug.cgi?id=1177973
Cc: <stable@vger.kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55bb919be4 upstream.
Ideally this should be a multiple of the VM block size.
2MB should at least fit for Vega/Navi.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5dff80bdce upstream.
On connector destruction call drm_dp_mst_topology_mgr_destroy
to release resources allocated in drm_dp_mst_topology_mgr_init.
Do it only if MST manager was initilized before otherwsie a crash
is seen on driver unload/device unplug.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d56b1980d7 upstream.
0 causes instruction fetch stall at cache line boundary under some
conditions on Navi10. A non-zero prefetch is the preferred default
in any case.
Fixes soft hang in Luxmark.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37b7cb10f0 upstream.
[WHY]
When disabling DP video, the current REG_WAIT timeout
of 50ms is too low for certain cases with very high
VSYNC intervals.
[HOW]
Increase the timeout to 102ms, so that
refresh rates as low as 10Hz can be handled properly.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4aa8dff60 upstream.
2MB area is reserved at top inside VM.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e50e4f0b85 upstream.
If interrupt comes late, during probe error path or device remove (could
be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler
i2c_imx_isr() will access registers with the clock being disabled. This
leads to external abort on non-linefetch on Toradex Colibri VF50 module
(with Vybrid VF5xx):
Unhandled fault: external abort on non-linefetch (0x1008) at 0x8882d003
Internal error: : 1008 [#1] ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0 #607
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
(i2c_imx_isr) from [<8017009c>] (free_irq+0x25c/0x3b0)
(free_irq) from [<805844ec>] (release_nodes+0x178/0x284)
(release_nodes) from [<80580030>] (really_probe+0x10c/0x348)
(really_probe) from [<80580380>] (driver_probe_device+0x60/0x170)
(driver_probe_device) from [<80580630>] (device_driver_attach+0x58/0x60)
(device_driver_attach) from [<805806bc>] (__driver_attach+0x84/0xc0)
(__driver_attach) from [<8057e228>] (bus_for_each_dev+0x68/0xb4)
(bus_for_each_dev) from [<8057f3ec>] (bus_add_driver+0x144/0x1ec)
(bus_add_driver) from [<80581320>] (driver_register+0x78/0x110)
(driver_register) from [<8010213c>] (do_one_initcall+0xa8/0x2f4)
(do_one_initcall) from [<80c0100c>] (kernel_init_freeable+0x178/0x1dc)
(kernel_init_freeable) from [<80807048>] (kernel_init+0x8/0x110)
(kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20)
Additionally, the i2c_imx_isr() could wake up the wait queue
(imx_i2c_struct->queue) before its initialization happens.
The resource-managed framework should not be used for interrupt handling,
because the resource will be released too late - after disabling clocks.
The interrupt handler is not prepared for such case.
Fixes: 1c4b6c3bcf ("i2c: imx: implement bus recovery")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3b14296da upstream.
The way the driver is implemented is buggy for the (admittedly unlikely)
use case where there are two RTCs with one having an interrupt configured
and the second not. This is caused by the fact that we use a global
rtc_class_ops struct which we modify depending on whether the irq number
is present or not.
Fix it by using two const ops structs with and without alarm operations.
While at it: not being able to request a configured interrupt is an error
so don't ignore it and bail out of probe().
Fixes: ed13d89b08 ("rtc: Add Epson RX8010SJ RTC driver")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200914154601.32245-2-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d005f8c658 upstream.
A detach hung is possible when a race occurs between the detach process
and the ubi background thread. The following sequences outline the race:
ubi thread: if (list_empty(&ubi->works)...
ubi detach: set_bit(KTHREAD_SHOULD_STOP, &kthread->flags)
=> by kthread_stop()
wake_up_process()
=> ubi thread is still running, so 0 is returned
ubi thread: set_current_state(TASK_INTERRUPTIBLE)
schedule()
=> ubi thread will never be scheduled again
ubi detach: wait_for_completion()
=> hung task!
To fix that, we need to check kthread_should_stop() after we set the
task state, so the ubi thread will either see the stop bit and exit or
the task state is reset to runnable such that it isn't scheduled out
indefinitely.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: <stable@vger.kernel.org>
Fixes: 801c135ce7 ("UBI: Unsorted Block Images")
Reported-by: syzbot+853639d0cb16c31c7a14@syzkaller.appspotmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c42a5c02b upstream.
commit feb92d7d38 "(ARC: perf: don't bail setup if pct irq
missing in device-tree)" introduced a silly brown-paper bag bug:
The assignment and comparison in an if statement were not bracketed
correctly leaving the order of evaluation undefined.
|
| if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
| ^^^ ^^^^
And given such a chance, the compiler will bite you hard, fully entitled
to generating this piece of beauty:
|
| # if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
|
| bl.d @platform_get_irq <-- irq returned in r0
|
| setge r2, r0, 0 <-- r2 is bool 1 or 0 if irq >= 0 true/false
| brlt.d r0, 0, @.L114
|
| st_s r2,[sp] <-- irq saved is bool 1 or 0, not actual return val
| st 1,[r3,160] # arc_pmu.18_29->irq <-- drops bool and assumes 1
|
| # return __request_percpu_irq(irq, handler, 0,
|
| bl.d @__request_percpu_irq;
| mov_s r0,1 <-- drops even bool and assumes 1 which fails
With the snafu fixed, everything is as expected.
| bl.d @platform_get_irq <-- returns irq in r0
|
| mov_s r2,r0
| brlt.d r2, 0, @.L112
|
| st_s r0,[sp] <-- irq isaved is actual return value above
| st r0,[r13,160] #arc_pmu.18_27->irq
|
| bl.d @__request_percpu_irq <-- r0 unchanged so actual irq returned
| add r4,r4,r12 #, tmp363, __ptr
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb674a4d4d upstream.
There is no need to dump authentication options while remounting,
because authentication initialization can only be doing once in
the first mount process. Dumping authentication mount options in
remount process may cause memory leak if UBIFS has already been
mounted with old authentication mount options.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: <stable@vger.kernel.org> # 4.20+
Fixes: d8a22773a1 ("ubifs: Enable authentication support")
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78c7d49f55 upstream.
When removing the last reference of an inode the size of an auth node
is already part of write_len. So we must not call ubifs_add_auth_dirt().
Call it only when needed.
Cc: <stable@vger.kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Kristof Havasi <havasiefr@gmail.com>
Fixes: 6a98bc4614 ("ubifs: Add authentication nodes to journal")
Reported-and-tested-by: Kristof Havasi <havasiefr@gmail.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2aae745b8 upstream.
Fix some potential memory leaks in error handling branches while
iterating xattr entries. For example, function ubifs_tnc_remove_ino()
forgets to free pxent if it exists. Similar problems also exist in
ubifs_purge_xattrs(), ubifs_add_orphan() and ubifs_jnl_write_inode().
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: <stable@vger.kernel.org>
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58f6e78a65 upstream.
Fix some potential memory leaks in error handling branches while
iterating dent entries. For example, function dbg_check_dir()
forgets to free pdent if it exists.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: <stable@vger.kernel.org>
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b3dccd48d upstream.
There's no protection in nfsd_dispatch() against a NULL .pc_func
helpers. A malicious NFS client can trigger a crash by invoking the
unused/unsupported NFSv2 ROOT or WRITECACHE procedures.
The current NFSD dispatcher does not support returning a void reply
to a non-NULL procedure, so the reply to both of these is wrong, for
the moment.
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c39076c27 upstream.
RFC 7862 introduced a new flag that either client or server is
allowed to set: EXCHGID4_FLAG_SUPP_FENCE_OPS.
Client needs to update its bitmask to allow for this flag value.
v2: changed minor version argument to unsigned int
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Zhizhikin