[ Upstream commit 47ce030b7a ]
blk_exit_queue will free elevator_data, while blk_mq_run_work_fn
will access it. Move cancel of hctx->run_work to the front of
blk_exit_queue to avoid use-after-free.
Fixes: 1b97871b50 ("blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release")
Signed-off-by: Yang Yang <yang.yang@vivo.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 581e2b4197 ]
Fix issues with DMA transfers bigger than 512 bytes on Exynos3250. Without
the patches such transfers fail to complete. This solution to the problem
is found in the vendor kernel for ARTIK5 boards based on Exynos3250.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20201002122243.26849-2-l.stelmach@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 513034d8b0 ]
When PINCTRL_BCM2835 is enabled and GPIOLIB is disabled, it results in the
following Kbuild warning:
WARNING: unmet direct dependencies detected for GPIOLIB_IRQCHIP
Depends on [n]: GPIOLIB [=n]
Selected by [y]:
- PINCTRL_BCM2835 [=y] && PINCTRL [=y] && OF [=y] && (ARCH_BCM2835 [=n] || ARCH_BRCMSTB [=n] || COMPILE_TEST [=y])
The reason is that PINCTRL_BCM2835 selects GPIOLIB_IRQCHIP without
depending on or selecting GPIOLIB while GPIOLIB_IRQCHIP is subordinate to
GPIOLIB.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: 85ae9e512f ("pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Link: https://lore.kernel.org/r/20200914144025.371370-1-fazilyildiran@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aea6cb9970 ]
When creating a new regulator its supply cannot create the sysfs link
because the device is not yet published. Remove early supply resolving
since it will be done later anyway. This makes the following error
disappear and the symlinks get created instead.
DCDC_REG1: supplied by VSYS
VSYS: could not add device link regulator.3 err -2
Note: It doesn't fix the problem for bypassed regulators, though.
Fixes: 45389c4752 ("regulator: core: Add early supply resolution for regulators")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/ba09e0a8617ffeeb25cb4affffe6f3149319cef8.1601155770.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dae2aaaf4 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
And also, when the call of function vpe_runtime_get() failed,
we won't call vpe_runtime_put().
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails
inside vpe_runtime_get().
Fixes: 4571912743 ("[media] v4l: ti-vpe: Add VPE mem to mem driver")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88f50a05f9 ]
Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not
called in error handling paths. Thus replace the jump target
"err_release_buffers" by "err_pm_putw".
Fixes: 152e0bf602 ("media: stm32-dcmi: add power saving support")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78741ce98c ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.
Fixes: c5086f130a ("[media] s5p-mfc: Use clock gating only on MFC v5 hardware")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63e36a381d ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, causing incorrect ref count if
pm_runtime_put_noidle() is not called in error handling paths.
Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails.
Fixes: 6eaafbdb66 ("[media] v4l: rcar-fcp: Keep the coding style consistent")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 877cb8a444 ]
tc358743_cec_isr is misnammed, it is not the main isr.
So rename it to be consistent with its siblings,
tc358743_cec_handler.
It also does not check if its input parameter 'handled' is
is non NULL like its siblings, so add a check.
Fixes: a0ec8d1dc4 ("media: tc358743: add CEC support")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21d387b8d3 ]
When platform_get_irq() fails, we should release
vfd and unregister pcdev->v4l2_dev just like the
subsequent error paths.
Fixes: d4e192cc44 ("media: mx2_emmaprp: Check for platform_get_irq() error")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 228d284aac ]
In the init loop, if an error occurs in function 'dma_alloc_coherent',
then goto the err_cleanup section, after run i--,
in the array ring, the struct mtk_ring with index i will not be released,
causing memory leaks
Fixes: 785e5c616c ("crypto: mediatek - Add crypto driver support for some MediaTek chips")
Cc: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Xiaoliang Pang <dawning.pang@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c094b31ea ]
Starting with MAX34451, the chips of this series support STATUS_IOUT and
STATUS_TEMPERATURE commands, and no longer report over-current and
over-temperature status with STATUS_MFR_SPECIFIC.
Fixes: 7a001dbab4 ("hwmon: (pmbus/max34440) Add support for MAX34451.")
Fixes: 50115ac9b6 ("hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461")
Reported-by: Steve Foreman <foremans@google.com>
Cc: Steve Foreman <foremans@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3faf757bad ]
Running export/import for hashes in peculiar order (mostly done by
openssl) can mess up the internal book keeping of the OMAP SHA core.
Fix by forcibly writing the correct DIGCNT back to hardware. This issue
was noticed while transitioning to openssl 1.1 support.
Fixes: 0d373d6032 ("crypto: omap-sham - Add OMAP4/AM33XX SHAM Support")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cac7cbfb4 ]
v4l2_async_notifier_add_subdev() requires the asd to be allocated
dynamically, but the rcar-csi2 driver embeds it in the rcar_csi2
structure. This causes memory corruption when the notifier is destroyed
at remove time with v4l2_async_notifier_cleanup().
Fix this issue by registering the asd with
v4l2_async_notifier_add_fwnode_subdev(), which allocates it dynamically
internally.
Fixes: 769afd212b ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 468e986dac ]
v4l2_async_notifier_add_subdev() requires the asd to be allocated
dynamically, but the rcar-drif driver embeds it in the
rcar_drif_graph_ep structure. This causes memory corruption when the
notifier is destroyed at remove time with v4l2_async_notifier_cleanup().
Fix this issue by registering the asd with
v4l2_async_notifier_add_fwnode_subdev(), which allocates it dynamically
internally.
Fixes: d079f94c90 ("media: platform: Switch to v4l2_async_notifier_add_subdev")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdd4f78249 ]
The fwnode reference corresponding to the endpoint is leaked in an error
path of the rcar_drif_parse_subdevs() function. Fix it, and reorganize
fwnode reference handling in the function to release references early,
simplifying error paths.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 576f5d4ba8 ]
During testing this sensor on iW-RainboW-G21D-Qseven platform in 8-bit DVP
mode with rcar-vin bridge noticed the capture worked fine for the first run
(with yavta), but for subsequent runs the bridge driver waited for the
frame to be captured. Debugging further noticed the data lines were
enabled/disabled in stream on/off callback and dumping the register
contents 0x3017/0x3018 in ov5640_set_stream_dvp() reported the correct
values, but yet frame capturing failed.
To get around this issue data lines are enabled in s_power callback.
(Also the sensor remains in power down mode if not streaming so power
consumption shouldn't be affected)
Fixes: f22996db44 ("media: ov5640: add support of DVP parallel interface")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b987d70e9 ]
Keep the sensor in software power down mode and wake up only in
ov5640_set_stream_dvp() callback.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8fc21c170 ]
When devm_ioremap_resource() fails, isp should be
freed just like other error paths in isp_probe.
Fixes: 8644cdf972 ("[media] omap3isp: Replace many MMIO regions by two")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08913a8e45 ]
The intent here is to reset the whole 'scaler_coeffs_luma' array, not just
the first element.
Fixes: e11110a5b7 ("media: staging/intel-ipu3: css: Compute and program ccs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 171994e498 ]
UBSAN reports a shift-out-of-bounds warning in uvc_get_le_value(). The
report is correct, but the issue should be harmless as the computed
value isn't used when the shift is negative. This may however cause
incorrect behaviour if a negative shift could generate adverse side
effects (such as a trap on some architectures for instance).
Regardless of whether that may happen or not, silence the warning as a
full WARN backtrace isn't nice.
Reported-by: Bart Van Assche <bvanassche@acm.org>
Fixes: c0efd23292 ("V4L/DVB (8145a): USB Video Class driver")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6834b4b58 ]
The media controller core prints a warning when an entity is registered
without a function being set. This affects the uvcvideo driver, as the
warning was added without first addressing the issue in existing
drivers. The problem is harmless, but unnecessarily worries users. Fix
it by mapping UVC entity types to MC entity functions as accurately as
possible using the existing functions.
Fixes: b50bde4e47 ("[media] v4l2-subdev: use MEDIA_ENT_T_UNKNOWN for new subdevs")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52438c4463 ]
clang static analysis reports this error
m5mols_core.c:767:4: warning: Called function pointer
is null (null dereference) [core.CallAndMessage]
info->set_power(&client->dev, 0);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In other places, the set_power ptr is checked.
So add a check.
Fixes: bc125106f8 ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c85f628f6 ]
Although the code is correct and doing the right thing, the clock diagram
showed the wrong register for the bit divider, which had me doubting the
understanding of the tree. Fix this to avoid doubts in the future.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Fixes: aa2882481c ("media: ov5640: Adjust the clock based on the expected rate")
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00d21f325d ]
The "idle" pinctrl state is optional as documented in the DT binding.
The change introduced by the commit being reverted makes that pinctrl state
mandatory and breaks initialization of the whole media driver, since the
"idle" state is not specified in any mainline dts.
This reverts commit 18ffec7505 ("media: exynos4-is: Add missed check for pinctrl_lookup_state()")
to fix the regression.
Fixes: 18ffec7505 ("media: exynos4-is: Add missed check for pinctrl_lookup_state()")
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 505bfc2a14 ]
clang static analysis reports this problem
tuner-simple.c:714:13: warning: Assigned value is
garbage or undefined
buffer[1] = buffer[3];
^ ~~~~~~~~~
In simple_set_radio_freq buffer[3] used to be done
in-function with a switch of tuner type, now done
by a call to simple_radio_bandswitch which has this case
case TUNER_TENA_9533_DI:
case TUNER_YMEC_TVF_5533MF:
tuner_dbg("This tuner doesn't ...
return 0;
which does not set buffer[3]. In the old logic, this case
would have returned 0 from simple_set_radio_freq.
Recover this old behavior by returning an error for this
codition. Since the old simple_set_radio_freq behavior
returned a 0, do the same.
Fixes: c7a9f3aa1e ("V4L/DVB (7129): tuner-simple: move device-specific code into three separate functions")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64f4a62e3b ]
engine->stat_irq_thresh was initialized after device_create_file() in
the probe function, the initialization may race with call to
spacc_stat_irq_thresh_store() which updates engine->stat_irq_thresh,
therefore initialize it before creating the file in probe function.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: ce92136843 ("crypto: picoxcell - add support for the...")
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7ade9aaf6 ]
Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()', in 'setup_crypt_desc()'.
Fixes: 81bef01500 ("crypto: ixp4xx - Hardware crypto support for IXP4xx CPUs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cbde6c6a6 ]
In case of memory allocation failure, a negative error code should
be returned.
Fixes: 785e5c616c ("crypto: mediatek - Add crypto driver support for some MediaTek chips")
Cc: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a05b029c1 ]
I removed the MAY_BACKLOG flag on the aio path a while ago but
the error check still incorrectly interpreted EBUSY as success.
This may cause the submitter to wait for a request that will never
complete.
Fixes: dad4199706 ("crypto: algif_skcipher - Do not set...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59d5396a46 ]
An incorrect sizeof is being used, struct attribute ** is not correct,
it should be struct attribute *. Note that since ** is the same size as
* this is not causing any issues. Improve this fix by using sizeof(*attrs)
as this allows us to not even reference the type of the pointer.
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Fixes: 5168654630 ("x86/events/amd/iommu: Fix sysfs perf attribute groups")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201001113900.58889-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f94c91f7ba ]
When nmi_check_duration() is checking the time an NMI handler took to
execute, the whole_msecs value used should be read from the @duration
argument, not from the ->max_duration, the latter being used to store
the current maximal duration.
[ bp: Rewrite commit message. ]
Fixes: 248ed51048 ("x86/nmi: Remove irq_work from the long duration NMI handler")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Libing Zhou <libing.zhou@nokia-sbell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Changbin Du <changbin.du@gmail.com>
Link: https://lkml.kernel.org/r/20200820025641.44075-1-libing.zhou@nokia-sbell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f5d41f3a0 ]
There are some updates for the Icelake model specific uncore performance
monitors. (The update can be found at 10th generation intel core
processors families specification update Revision 004, ICL068)
1) Counter 0 of ARB uncore unit is not available for software use
2) The global 'enable bit' (bit 29) and 'freeze bit' (bit 31) of
MSR_UNC_PERF_GLOBAL_CTRL cannot be used to control counter behavior.
Needs to use local enable in event select MSR.
Accessing the modified bit/registers will be ignored by HW. Users may
observe inaccurate results with the current code.
The changes of the MSR_UNC_PERF_GLOBAL_CTRL imply that groups cannot be
read atomically anymore. Although the error of the result for a group
becomes a bit bigger, it still far lower than not using a group. The
group support is still kept. Only Remove the *_box() related
implementation.
Since the counter 0 of ARB uncore unit is not available, update the MSR
address for the ARB uncore unit.
There is no change for IMC uncore unit, which only include free-running
counters.
Fixes: 6e394376ee ("perf/x86/intel/uncore: Add Intel Icelake uncore support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200925134905.8839-2-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df3cb4ea1f ]
We've met problems that occasionally tasks with full cpumask
(e.g. by putting it into a cpuset or setting to full affinity)
were migrated to our isolated cpus in production environment.
After some analysis, we found that it is due to the current
select_idle_smt() not considering the sched_domain mask.
Steps to reproduce on my 31-CPU hyperthreads machine:
1. with boot parameter: "isolcpus=domain,2-31"
(thread lists: 0,16 and 1,17)
2. cgcreate -g cpu:test; cgexec -g cpu:test "test_threads"
3. some threads will be migrated to the isolated cpu16~17.
Fix it by checking the valid domain mask in select_idle_smt().
Fixes: 10e2f1acd0 ("sched/core: Rewrite and improve select_idle_siblings())
Reported-by: Wetp Zhang <wetp.zy@linux.alibaba.com>
Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/1600930127-76857-1-git-send-email-xlpang@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 688494a407 ]
In tx2_uncore_pmu_init_dev(), a call to acpi_dev_get_resources() is used
to create a list _CRS resources which is searched for the device base
address. There is an error check following this:
if (!rentry->res)
return NULL
In no case, will rentry->res be NULL, so the test is useless. Even
if the test worked, it comes before the resource list memory is
freed. None of this really matters as long as the ACPI table has
the memory resource. Let's clean it up so that it makes sense and
will give a meaningful error should firmware leave out the memory
resource.
Fixes: 69c32972d5 ("drivers/perf: Add Cavium ThunderX2 SoC UNCORE PMU driver")
Signed-off-by: Mark Salter <msalter@redhat.com>
Link: https://lore.kernel.org/r/20200915204110.326138-2-msalter@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a76b8236ed ]
This splat was reported on newer Fedora kernels booting on certain
X-gene based machines:
xgene-pmu APMC0D83:00: X-Gene PMU version 3
Unable to handle kernel read from unreadable memory at virtual \
address 0000000000004006
...
Call trace:
string+0x50/0x100
vsnprintf+0x160/0x750
devm_kvasprintf+0x5c/0xb4
devm_kasprintf+0x54/0x60
__devm_ioremap_resource+0xdc/0x1a0
devm_ioremap_resource+0x14/0x20
acpi_get_pmu_hw_inf.isra.0+0x84/0x15c
acpi_pmu_dev_add+0xbc/0x21c
acpi_ns_walk_namespace+0x16c/0x1e4
acpi_walk_namespace+0xb4/0xfc
xgene_pmu_probe_pmu_dev+0x7c/0xe0
xgene_pmu_probe.part.0+0x2c0/0x310
xgene_pmu_probe+0x54/0x64
platform_drv_probe+0x60/0xb4
really_probe+0xe8/0x4a0
driver_probe_device+0xe4/0x100
device_driver_attach+0xcc/0xd4
__driver_attach+0xb0/0x17c
bus_for_each_dev+0x6c/0xb0
driver_attach+0x30/0x40
bus_add_driver+0x154/0x250
driver_register+0x84/0x140
__platform_driver_register+0x54/0x60
xgene_pmu_driver_init+0x28/0x34
do_one_initcall+0x40/0x204
do_initcalls+0x104/0x144
kernel_init_freeable+0x198/0x210
kernel_init+0x20/0x12c
ret_from_fork+0x10/0x18
Code: 91000400 110004e1 eb08009f 540000c0 (38646846)
---[ end trace f08c10566496a703 ]---
This is due to use of an uninitialized local resource struct in the xgene
pmu driver. The thunderx2_pmu driver avoids this by using the resource list
constructed by acpi_dev_get_resources() rather than using a callback from
that function. The callback in the xgene driver didn't fully initialize
the resource. So get rid of the callback and search the resource list as
done by thunderx2.
Fixes: 832c927d11 ("perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver")
Signed-off-by: Mark Salter <msalter@redhat.com>
Link: https://lore.kernel.org/r/20200915204110.326138-1-msalter@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a4bb5e550 ]
Commit
0c2a3913d6 ("x86/fpu: Parse clearcpuid= as early XSAVE argument")
changed clearcpuid parsing from __setup() to cmdline_find_option().
While the __setup() function would have been called for each clearcpuid=
parameter on the command line, cmdline_find_option() will only return
the last one, so the change effectively made it impossible to disable
more than one bit.
Allow a comma-separated list of bit numbers as the argument for
clearcpuid to allow multiple bits to be disabled again. Log the bits
being disabled for informational purposes.
Also fix the check on the return value of cmdline_find_option(). It
returns -1 when the option is not found, so testing as a boolean is
incorrect.
Fixes: 0c2a3913d6 ("x86/fpu: Parse clearcpuid= as early XSAVE argument")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200907213919.2423441-1-nivedita@alum.mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35d1ce6bec ]
A warning as below may be triggered when sampling with large PEBS.
[ 410.411250] perf: interrupt took too long (72145 > 71975), lowering
kernel.perf_event_max_sample_rate to 2000
[ 410.724923] ------------[ cut here ]------------
[ 410.729822] WARNING: CPU: 0 PID: 16397 at arch/x86/events/core.c:1422
x86_pmu_stop+0x95/0xa0
[ 410.933811] x86_pmu_del+0x50/0x150
[ 410.937304] event_sched_out.isra.0+0xbc/0x210
[ 410.941751] group_sched_out.part.0+0x53/0xd0
[ 410.946111] ctx_sched_out+0x193/0x270
[ 410.949862] __perf_event_task_sched_out+0x32c/0x890
[ 410.954827] ? set_next_entity+0x98/0x2d0
[ 410.958841] __schedule+0x592/0x9c0
[ 410.962332] schedule+0x5f/0xd0
[ 410.965477] exit_to_usermode_loop+0x73/0x120
[ 410.969837] prepare_exit_to_usermode+0xcd/0xf0
[ 410.974369] ret_from_intr+0x2a/0x3a
[ 410.977946] RIP: 0033:0x40123c
[ 411.079661] ---[ end trace bc83adaea7bb664a ]---
In the non-overflow context, e.g., context switch, with large PEBS, perf
may stop an event twice. An example is below.
//max_samples_per_tick is adjusted to 2
//NMI is triggered
intel_pmu_handle_irq()
handle_pmi_common()
drain_pebs()
__intel_pmu_pebs_event()
perf_event_overflow()
__perf_event_account_interrupt()
hwc->interrupts = 1
return 0
//A context switch happens right after the NMI.
//In the same tick, the perf_throttled_seq is not changed.
perf_event_task_sched_out()
perf_pmu_sched_task()
intel_pmu_drain_pebs_buffer()
__intel_pmu_pebs_event()
perf_event_overflow()
__perf_event_account_interrupt()
++hwc->interrupts >= max_samples_per_tick
return 1
x86_pmu_stop(); # First stop
perf_event_context_sched_out()
task_ctx_sched_out()
ctx_sched_out()
event_sched_out()
x86_pmu_del()
x86_pmu_stop(); # Second stop and trigger the warning
Perf should only invoke the perf_event_overflow() in the overflow
context.
Current drain_pebs() is called from:
- handle_pmi_common() -- overflow context
- intel_pmu_pebs_sched_task() -- non-overflow context
- intel_pmu_pebs_disable() -- non-overflow context
- intel_pmu_auto_reload_read() -- possible overflow context
With PERF_SAMPLE_READ + PERF_FORMAT_GROUP, the function may be
invoked in the NMI handler. But, before calling the function, the
PEBS buffer has already been drained. The __intel_pmu_pebs_event()
will not be called in the possible overflow context.
To fix the issue, an indicator is required to distinguish between the
overflow context aka handle_pmi_common() and other cases.
The dummy regs pointer can be used as the indicator.
In the non-overflow context, perf should treat the last record the same
as other PEBS records, and doesn't invoke the generic overflow handler.
Fixes: 21509084f9 ("perf/x86/intel: Handle multiple records in the PEBS buffer")
Reported-by: Like Xu <like.xu@linux.intel.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Like Xu <like.xu@linux.intel.com>
Link: https://lkml.kernel.org/r/20200902210649.2743-1-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66077adb70 ]
platform_get_irq() returns a negative error number on error. In such a
case, comparison to 0 would pass the check therefore check the return
value properly, whether it is negative.
[ bp: Massage commit message. ]
Fixes: 86a18ee21e ("EDAC, ti: Add support for TI keystone and DRA7xx EDAC")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200827070743.26628-2-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afce699694 ]
platform_get_irq() returns a negative error number on error. In such a
case, comparison to 0 would pass the check therefore check the return
value properly, whether it is negative.
[ bp: Massage commit message. ]
Fixes: 9b7e6242ee ("EDAC, aspeed: Add an Aspeed AST2500 EDAC driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Stefan Schaeckeler <schaecsn@gmx.net>
Link: https://lkml.kernel.org/r/20200827070743.26628-1-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 857a3139bd ]
When pci_get_device_func() fails, the driver doesn't need to execute
pci_dev_put(). mci should still be freed, though, to prevent a memory
leak. When pci_enable_device() fails, the error injection PCI device
"einj" doesn't need to be disabled either.
[ bp: Massage commit message, rename label to "bail_mc_free". ]
Fixes: 52608ba205 ("i5100_edac: probe for device 19 function 0")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200826121437.31606-1-dinghao.liu@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 83e8aa9121 upstream.
A hardware limitation exists for CAAM until Era 9 which restricts
the accelerator to IVs with only 8 bytes. When CAAM has a lower era
a fallback is necessary to process 16 bytes IV.
Fixes: b189817cf7 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cbdad1f246 upstream.
The async path cannot use MAY_BACKLOG because it is not meant to
block, which is what MAY_BACKLOG does. On the other hand, both
the sync and async paths can make use of MAY_SLEEP.
Fixes: 83094e5e9e ("crypto: af_alg - add async support to...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Yang