According to Spec this is a reserved bit for Gen9+ and should not be set.
Change-Id: I0215fb7057b94139b7a2f90ecc7a0201c0c93ad4
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For the conversion to atomic. The pre_enable() hooks are called as part
of the crtc enable sequence, at which point the staged config was
already made effective. Furthermore, the function actually changes
hardware state, so it should anyway deal with current and not staged
config.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reduce dependency on the staged config by using the atomic state
instead.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reduce dependency on the staged config by using the atomic state
instead.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's not needed anymore, now that all the users were converted to using
an atomic state.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Move towards atomic by using the atomic state instead.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we use a drm atomic state for the legacy modeset, it is
possible to get rid of the usage of intel_crtc->new_config in the
function intel_mode_max_pixclk().
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
../drivers/gpu/drm/i915/intel_pm.c:3185:45: warning: Initializer entry defined twice
../drivers/gpu/drm/i915/intel_pm.c:3185:52: also defined here
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sometimes userspace wants a true overlay that is never clipped. In such
cases, we need to disable the destination colorkey. However, it is
currently unconditionally enabled in the overlay with no means of
disabling. So rectify that by always default to on, and extending the
UPDATE_ATTR ioctl to support explicit disabling of the colorkey.
This is contrast to the spite code which requires explicit enabling of
either the destination or source colorkey. Handling source colorkey is
still todo for the overlay. (Of course it may be worth migrating overlay
to sprite before then.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Occasionally it would be interesting to read some of the DPCD registers
for debug purposes, without having to resort to logging. Add an i915
specific i915_dpcd debugfs file for DP and eDP connectors to dump parts
of the DPCD. Currently the DPCD addresses to be dumped are statically
configured, and more can be added trivially.
The implementation also makes it relatively easy to add other i915 and
connector specific debugfs files in the future, as necessary.
This is currently i915 specific just because there's no generic way to
do AUX transactions given just a drm_connector. However it's all pretty
straightforward to port to other drivers.
v2: Add more DPCD registers to dump.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Program the default initial value of the L3SqcReg1 on BDW for performance
v2: Default confirmed and using intel_ring_emit_wa as Mika pointed out.
v3: Spec shows now a different value. It tells us to set to 0x784000
instead the 0x610000 that is there already.
Also rebased after a long time so using WA_WRITE now.
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We make use of HW tracking for Selective update region and enable frame sync on
sink. We use hardware's hardcoded data values for frame sync and GTC.
v2: Add 3200x2000 resolution restriction with PSR2, move psr2_support to i915_psr
struct, add aux_frame_sync to independently control aux frame sync, rename the
TP2 TIME macro for 2500us (Rodrigo, Siva)
v3: Moving the resolution restriction to intel_psr_enable so that we check it
only once(Durga)
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Count the number of requests in a ring for the user and show who
submitted them.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The best_encoder field of connector_state wasn't properly set when a
connector was being disabled, leading to an incosistent atomic state.
For now, this doesn't cause anything to blow up, because everywhere
we're using connector_state->best_encoder there is a check for
connector_state->crtc which is properly initialized. I reached the issue
while testing some patches I haven't sent out yet, that remove the usage
of intel_connector->new_encoder from check_digital_port_conflicts(). In
that case, it would be possible to trigger the converted version of the
WARN in that function.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
[danvet: Add commit message augmentation Ander supplied.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will be helpful for adding future platforms. It is better to keep
the information in the single point of truth (the table) instead of
duplicating it into the validity function.
While at it, add dev_priv parameter to the function, also to prepare for
adding future platform support.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Index the gmbus tables directly using the pin instead of having a
confusing "port = i + 1" mapping. This finishes off removing the "gmbus
port" as a notion, and leaves us with just the "gmbus pin".
As pin 0 is invalid by definition and the gmbus tables will have a gap
at that index, add pin validity check to all the loops. This will be
benefitial for supporting platforms that have different numbers of pins,
or gaps.
v2: s/GMBUS_PIN_MAX/GMBUS_NUM_PINS/ (Ville, Daniel)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rename intel_gmbus_is_port_valid to intel_gmbus_is_valid_pin, and rename
port parameters to pin as well. This matches usage all around, as
usually a pin is passed to the validity check function. No functional
changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The specs refer to pin pairs. Start moving towards using pin rather than
port all around to avoid confusion. No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The legacy and LRC code paths have an almost identical procedure for waiting for
space in the ring buffer. They both search for a request in the free list that
will advance the tail to a point where sufficient space is available. They then
wait for that request, retire it and recalculate the free space value.
Unfortunately, a bug in the LRC side meant that the resulting free space might
not be as large as expected and indeed, might not be sufficient. This is because
it was testing against the value of request->tail not request->postfix. Whereas,
when a request is retired, ringbuf->tail is updated to req->postfix not
req->tail.
Another significant difference between the two is that the LRC one did not trust
the wait for request to work! It redid the is there enough space available test
and would fail the call if insufficient. Whereas, the legacy version just said
'return 0' - it assumed the preceeding code works. This difference meant that
the LRC version still worked even with the bug - it just fell back to the
polling wait path.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The request allocation code is largely duplicated between legacy mode and
execlist mode. The actual difference between the two versions of the code is
pretty minimal.
This patch moves the common code out into a separate function. This is then
called by the execution specific version prior to setting up the one different
value.
For: VIZ-5190
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The only usage of intel_logical_ring_begin() is within intel_lrc.c so it can be
made static. To avoid a forward declaration at the top of the file, it and bunch
of other functions have been shuffled upwards.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The submission portion of the execbuffer code path was abstracted into a
function pointer indirection as part of the legacy vs execlist work. The two
implementation functions are called 'i915_gem_ringbuffer_submission' and
'intel_execlists_submission' but the pointer was called 'do_execbuf'. There is
already a 'i915_gem_do_execbuffer' function (which is what calls the pointer
indirection). The name of the pointer is therefore considered to be backwards
and should be changed.
This patch renames it to 'execbuf_submit' which is hopefully a bit clearer.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Unify the HSW/BDW/SKL cdclk extraction code to conform to the same
.get_display_clock_speed() mold that all the other platforms
use.
v2: Update due to SKL code getting added
v3: Rebase on top of -nightly (introduction of intel_audio.c) (Mika Kahola)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Add v3 note as suggested by Damien.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we are "extracting" the cdclk frequency on ILK-IVB we
can also simplify ilk_get_aux_clock_divider() to calculate the
divider based on cdclk instead of hardcoding the values.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We don't currently have cdclk extraction code for 965g,snb,ivb.
Let's assume 400 MHz until we know better. That seems to match hints
in various vague documents. Whether that's good enough is not
entirely clear.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Acked-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Based on the BIOS DP A AUX 2x clock divider the cdclk frequency
on ILK is 450Mhz. At least that holds on my ILK and it matches
how we program the divider.
Supposedly cdclk is 400MHz on SNB and IVB, again based on the AUX 2x
clock divider. Note that I don't have a SNB or IVB machine with
eDP so I couldn't verify what the BIOS used, so this notion is
purely based on our current code,
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fill out the lower three digits for gen2 and gen3 cdclk frqeuncy. It's
not clear if these are accurate frquencies or just in the ballpark, but
without docs this is the best we can do.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
ns2501 requires the DVO 2x clock before it will respond to i2c access,
so make sure the clock is enabled when we try to initialize the encoder.
Fixes the display getting lost on module reload on my Fujitsu/Siemens
Lifebook S6010.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
After the GPU has wedged we can't turn on the overlay anymore. Only mark
it as active if we succeed in allocating ring space. This prevents a
WARN (previous;y a BUG) during driver unload if we attempted to use the
overlay after the GPU had already wedged.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
overlay.{active,pfit_active} are just on/off flags, so make them bool.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
BUG is bad, just use WARN.
Also drop one BUG(!overlay) since we'd oops anyway when dereferencing
it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On CHV, PUNIT team confirmed that 'VLV_GFX_CLK_STATUS_BIT' is not a
sticky bit and it will always be set. So ignore Check for previous
Gfx force off during suspend and allow the force clk as part S0ix
Sequence
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
BSpec recommends to keep the main link state consistent
between the source and the sink. As per that, update
the main link state in sink DPCD register to 'active',
for Valleyview based platforms.
Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We were missing a convenience stub to aquire the right mutex whilst
dropping the request, so add it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Makes that code atomic ready.
v2: Acquire crtc_state for the "other" pipe only when needed. (Daniel)
v3: Really only acquire the other state if necessary. (Daniel)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVGHwjAAoJEHm+PkMAQRiG8rcIAJ6cEJ6mbqLpyz5XrGf4yNp0
+wG/QlEpT8rgrxe9wSjB3lfW3kR2Pe69b9fVVCdiklygdkmva5vfmDrVGGzYfe3M
QrFSSlMVBplvh6IiM/L1mVMtr3DSmCO23YZZ9R5b7FoEYatNHRpNWBCBpuXpd4aD
sLuIvO3L/S7LqeOAFkkYWv6AuL9umicmjR8u+nsmCSRJom7At/aJ6R66WIp9vxho
Rn7r6wcUk6B2Q/gYNjdSE8SIwdyKhuBGyvqQ9U9s6Btg9DQfM/b0vG5kw9hqeAq/
9445jqVDP1whA2vz6GjnvltidxrqRvuDPBwzOnFmY5U+KZz4lS3x2mnWAAJ3xWs=
=TqVJ
-----END PGP SIGNATURE-----
Merge tag 'v4.0-rc6' into drm-intel-next
Backmerge Linux 4.0-rc6 because conflicts are (again) getting out of
hand. To make sure we don't lose any bugfixes from the 4.0-rc5-rc6
flurry of patches we've applied them all to -next too.
Conflicts:
drivers/gpu/drm/i915/intel_display.c
Always take the version from -next, we've already handled all
conflicts with explicit cherrypicking.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The latest and greatest fixes for ARM platform code. Worth pointing out are:
- Lines-wise, largest is a PXA fix for dealing with interrupts on DT that was
quite broken. It's still newish code so while we could have held this off,
it seemed appropriate to include now
- Some GPIO fixes for OMAP platforms added a few lines. This was also fixes for
code recently added (this release).
- Small OMAP timer fix to behave better with partially upstreamed platforms,
which is quite welcome.
- Allwinner fixes about operating point control, reducing overclocking in some
cases for better stability.
+ a handful of other smaller fixes across the map.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OclH
-----END PGP SIGNATURE-----
Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"The latest and greatest fixes for ARM platform code. Worth pointing
out are:
- Lines-wise, largest is a PXA fix for dealing with interrupts on DT
that was quite broken. It's still newish code so while we could
have held this off, it seemed appropriate to include now
- Some GPIO fixes for OMAP platforms added a few lines. This was
also fixes for code recently added (this release).
- Small OMAP timer fix to behave better with partially upstreamed
platforms, which is quite welcome.
- Allwinner fixes about operating point control, reducing
overclocking in some cases for better stability.
plus a handful of other smaller fixes across the map"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: juno: Fix misleading name of UART reference clock
ARM: dts: sunxi: Remove overclocked/overvoltaged OPP
ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting
ARM: socfpga: dts: fix spi1 interrupt
ARM: dts: Fix gpio interrupts for dm816x
ARM: dts: dra7: remove ti,hwmod property from pcie phy
ARM: OMAP: dmtimer: disable pm runtime on remove
ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure
ARM: OMAP2+: Fix socbus family info for AM33xx devices
ARM: dts: omap3: Add missing dmas for crypto
ARM: dts: rockchip: disable gmac by default in rk3288.dtsi
MAINTAINERS: add rockchip regexp to the ARM/Rockchip entry
ARM: pxa: fix pxa interrupts handling in DT
ARM: pxa: Fix typo in zeus.c
ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage
There's a few fixes to merge for 4.0, one to add a select in the machine
Kconfig option to fix a potential build failure, and two fixing cpufreq related
issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=e6O1
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.0' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
Allwinner fixes for 4.0
There's a few fixes to merge for 4.0, one to add a select in the machine
Kconfig option to fix a potential build failure, and two fixing cpufreq related
issues.
* tag 'sunxi-fixes-for-4.0' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: dts: sunxi: Remove overclocked/overvoltaged OPP
ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting
ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix a device tree based booting vs legacy booting regression for
omap3 crypto hardware by adding the missing DMA channels.
- Fix /sys/bus/soc/devices/soc0/family for am33xx devices.
- Fix two timer issues that can cause hangs if the timer related
hwmod data is missing like it often initially is for new SoCs.
- Remove pcie hwmods entry from dts as that causes runtime PM to
fail for the PHYs.
- A paper bag type dts configuration fix for dm816x GPIO
interrupts that I just noticed. This is most of the changes
diffstat wise, but as it's a basic feature for connecting
devices and things work otherwise, it should be fixed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=eCH/
-----END PGP SIGNATURE-----
Merge tag 'fixes-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for the -rc cycle:
- Fix a device tree based booting vs legacy booting regression for
omap3 crypto hardware by adding the missing DMA channels.
- Fix /sys/bus/soc/devices/soc0/family for am33xx devices.
- Fix two timer issues that can cause hangs if the timer related
hwmod data is missing like it often initially is for new SoCs.
- Remove pcie hwmods entry from dts as that causes runtime PM to
fail for the PHYs.
- A paper bag type dts configuration fix for dm816x GPIO
interrupts that I just noticed. This is most of the changes
diffstat wise, but as it's a basic feature for connecting
devices and things work otherwise, it should be fixed.
* tag 'fixes-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix gpio interrupts for dm816x
ARM: dts: dra7: remove ti,hwmod property from pcie phy
ARM: OMAP: dmtimer: disable pm runtime on remove
ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure
ARM: OMAP2+: Fix socbus family info for AM33xx devices
ARM: dts: omap3: Add missing dmas for crypto
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix interrupt number for SPI1 interface
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=NEia
-----END PGP SIGNATURE-----
Merge tag 'socfpga_fix_for_v4.0_2' of git://git.rocketboards.org/linux-socfpga-next into fixes
Late fix for v4.0 on the SoCFPGA platform:
- Fix interrupt number for SPI1 interface
* tag 'socfpga_fix_for_v4.0_2' of git://git.rocketboards.org/linux-socfpga-next:
ARM: socfpga: dts: fix spi1 interrupt
Signed-off-by: Olof Johansson <olof@lixom.net>
The UART reference clock speed is 7273.8 kHz, not 72738 kHz.
Dots aren't usually used in node names even though ePAPR permits
them. However, this can easily be avoided by expressing the
frequency in Hz, not kHz.
This patch changes the name to refclk7273800hz, reflecting the
actual clock speed.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
There are only 2 fixes, one for the zeus board about the regulator changes,
where a typo prevented the zeus board from having a working can regulator,
and one regression triggered by the interrupts IRQ shift of 16 affecting all
boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r3W0
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v4.0-rc5' of https://github.com/rjarzmik/linux into fixes
arm: pxa: fixes for v4.0-rc5
There are only 2 fixes, one for the zeus board about the regulator changes,
where a typo prevented the zeus board from having a working can regulator,
and one regression triggered by the interrupts IRQ shift of 16 affecting all
boards.
* tag 'fixes-for-v4.0-rc5' of https://github.com/rjarzmik/linux:
ARM: pxa: fix pxa interrupts handling in DT
ARM: pxa: Fix typo in zeus.c
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull x86 fix from Ingo Molnar:
"Fix x86 syscall exit code bug that resulted in spurious non-execution
of TIF-driven user-return worklets, causing big trouble for things
like KVM that rely on user notifiers for correctness of their vcpu
model, causing crashes like double faults"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/entry: Check for syscall exit work with IRQs disabled
Pull scheduler fix from Ingo Molnar:
"A single sched/rt corner case fix for RLIMIT_RTIME correctness"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix RLIMIT_RTTIME when PI-boosting to RT
Pull perf fix from Ingo Molnar:
"A perf kernel side fix for a fuzzer triggered lockup"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix irq_work 'tail' recursion
Pull locking fix from Ingo Molnar:
"A module unload lockdep race fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Fix the module unload key range freeing logic
