The i.MX8M SAI block is not compatible with the i.MX6SX one, as the
register layout has changed due to two version registers being added
at the beginning of the address map. Remove the bogus compatible.
Fixes: 8c61538dc9 ("arm64: dts: imx8mq: Add SAI2 node")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to i.MX8MM reference manual Rev.1, 03/2019:
SAI3_RXC pin's mux option #1 should be GPT1_CLK, NOT GPT1_CAPTURE2;
SAI3_TXFS pin's mux option #1 should be GPT1_CAPTURE2, NOT GPT1_CLK.
Fixes: c1c9d41319 ("dt-bindings: imx: Add pinctrl binding doc for imx8mm")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We continue to see a lot of new material. I've highlighted some of it
below, but there's been more beyond that as well.
One of the sweeping changes is that many boards have seen their ARM Mali
GPU devices added to device trees, since the DRM drivers have now been
merged.
So, with the caveat that I have surely missed several great
contributions, here's a collection of the material this time around:
New SoCs:
- Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)
- TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)
- Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)
New Boards / platforms:
- Aspeed BMC support for a number of new server platforms
- Kontron SMARC SoM (several i.MX6 versions)
- Novtech's Meerkat96 (i.MX7)
- ST Micro Avenger96 board
- Hardkernel ODROID-N2 (Amlogic G12B)
- Purism Librem5 devkit (i.MX8MQ)
- Google Cheza (Qualcomm SDM845)
- Qualcomm Dragonboard 845c (Qualcomm SDM845)
- Hugsun X99 TV Box (Rockchip RK3399)
- Khadas Edge/Edge-V/Captain (Rockchip RK3399)
Updated / expanded boards and platforms:
- Renesas r7s9210 has a lot of new peripherals added
- Polish and fixes for Rockchip-based Chromebooks
- Amlogic G12A has a lot of peripherals added
- Nvidia Jetson Nano sees various fixes and improvements, and is now at
feature parity with TX1
-----BEGIN PGP SIGNATURE-----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=sHZs
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Devicetree updates from Olof Johansson:
"We continue to see a lot of new material. I've highlighted some of it
below, but there's been more beyond that as well.
One of the sweeping changes is that many boards have seen their ARM
Mali GPU devices added to device trees, since the DRM drivers have now
been merged.
So, with the caveat that I have surely missed several great
contributions, here's a collection of the material this time around:
New SoCs:
- Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)
- TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)
- Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)
New Boards / platforms:
- Aspeed BMC support for a number of new server platforms
- Kontron SMARC SoM (several i.MX6 versions)
- Novtech's Meerkat96 (i.MX7)
- ST Micro Avenger96 board
- Hardkernel ODROID-N2 (Amlogic G12B)
- Purism Librem5 devkit (i.MX8MQ)
- Google Cheza (Qualcomm SDM845)
- Qualcomm Dragonboard 845c (Qualcomm SDM845)
- Hugsun X99 TV Box (Rockchip RK3399)
- Khadas Edge/Edge-V/Captain (Rockchip RK3399)
Updated / expanded boards and platforms:
- Renesas r7s9210 has a lot of new peripherals added
- Fixes and polish for Rockchip-based Chromebooks
- Amlogic G12A has a lot of peripherals added
- Nvidia Jetson Nano sees various fixes and improvements, and is now
at feature parity with TX1"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits)
ARM: dts: gemini: Set DIR-685 SPI CS as active low
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family
ARM: dts: exynos: Move Mali400 GPU node to "/soc"
ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210
arm64: dts: qcom: qcs404: Add missing space for cooling-cells property
arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire
arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs
arm64: dts: rockchip: enable rk3328 watchdog clock
ARM: dts: rockchip: add display nodes for rk322x
ARM: dts: rockchip: fix vop iommu-cells on rk322x
arm64: dts: rockchip: Add support for Hugsun X99 TV Box
arm64: dts: rockchip: Define values for the IPA governor for rock960
arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi
arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs
arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance.
Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie"
ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron
arm64: dts: qcom: sdm845-cheza: add initial cheza dt
ARM: dts: msm8974-FP2: Add vibration motor
...
cycle:
Core changes:
- Device links can optionally be added between a pin control
producer and its consumers. This will affect how the system
power management is handled: a pin controller will not suspend
before all of its consumers have been suspended. This was
necessary for the ST Microelectronics STMFX expander and
need to be tested on other systems as well: it makes sense
to make this default in the long run. Right now it is
opt-in per driver.
- Drive strength can be specified in microamps. With decreases
in silicon technology, milliamps isn't granular enough, let's
make it possible to select drive strengths in microamps. Right
now the Meson (AMlogic) driver needs this.
New drivers:
- New subdriver for the Tegra 194 SoC.
- New subdriver for the Qualcomm SDM845.
- New subdriver for the Qualcomm SM8150.
- New subdriver for the Freescale i.MX8MN (Freescale is now a
product line of NXP).
- New subdriver for Marvell MV98DX1135.
Driver improvements:
- The Bitmain BM1880 driver now supports pin config in
addition to muxing.
- The Qualcomm drivers can now reserve some GPIOs as taken
aside and not usable for users. This is used in ACPI systems
to take out some GPIO lines used by the BIOS so that
noone else (neither kernel nor userspace) will play with them
by mistake and crash the machine.
- A slew of refurbishing around the Aspeed drivers (board
management controllers for servers) in preparation for the
new Aspeed AST2600 SoC.
- A slew of improvements over the SH PFC drivers as usual.
- Misc cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=Wdw1
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.3 kernel cycle:
Core changes:
- Device links can optionally be added between a pin control producer
and its consumers. This will affect how the system power management
is handled: a pin controller will not suspend before all of its
consumers have been suspended.
This was necessary for the ST Microelectronics STMFX expander and
need to be tested on other systems as well: it makes sense to make
this default in the long run.
Right now it is opt-in per driver.
- Drive strength can be specified in microamps. With decreases in
silicon technology, milliamps isn't granular enough, let's make it
possible to select drive strengths in microamps.
Right now the Meson (AMlogic) driver needs this.
New drivers:
- New subdriver for the Tegra 194 SoC.
- New subdriver for the Qualcomm SDM845.
- New subdriver for the Qualcomm SM8150.
- New subdriver for the Freescale i.MX8MN (Freescale is now a product
line of NXP).
- New subdriver for Marvell MV98DX1135.
Driver improvements:
- The Bitmain BM1880 driver now supports pin config in addition to
muxing.
- The Qualcomm drivers can now reserve some GPIOs as taken aside and
not usable for users. This is used in ACPI systems to take out some
GPIO lines used by the BIOS so that noone else (neither kernel nor
userspace) will play with them by mistake and crash the machine.
- A slew of refurbishing around the Aspeed drivers (board management
controllers for servers) in preparation for the new Aspeed AST2600
SoC.
- A slew of improvements over the SH PFC drivers as usual.
- Misc cleanups and fixes"
* tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits)
pinctrl: aspeed: Strip moved macros and structs from private header
pinctrl: aspeed: Fix missed include
pinctrl: baytrail: Use GENMASK() consistently
pinctrl: baytrail: Re-use data structures from pinctrl-intel.h
pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux()
pinctrl: qcom: Add SM8150 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
dt-bindings: pinctrl: qcom: Document missing gpio nodes
pinctrl: aspeed: Add implementation-related documentation
pinctrl: aspeed: Split out pinmux from general pinctrl
pinctrl: aspeed: Clarify comment about strapping W1C
pinctrl: aspeed: Correct comment that is no longer true
MAINTAINERS: Add entry for ASPEED pinctrl drivers
dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
dt-bindings: pinctrl: aspeed: Split bindings document in two
pinctrl: qcom: Add irq_enable callback for msm gpio
pinctrl: madera: Fixup SPDX headers
pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard
pinctrl: tegra: Add bitmask support for parked bits
...
Pull networking updates from David Miller:
"Some highlights from this development cycle:
1) Big refactoring of ipv6 route and neigh handling to support
nexthop objects configurable as units from userspace. From David
Ahern.
2) Convert explored_states in BPF verifier into a hash table,
significantly decreased state held for programs with bpf2bpf
calls, from Alexei Starovoitov.
3) Implement bpf_send_signal() helper, from Yonghong Song.
4) Various classifier enhancements to mvpp2 driver, from Maxime
Chevallier.
5) Add aRFS support to hns3 driver, from Jian Shen.
6) Fix use after free in inet frags by allocating fqdirs dynamically
and reworking how rhashtable dismantle occurs, from Eric Dumazet.
7) Add act_ctinfo packet classifier action, from Kevin
Darbyshire-Bryant.
8) Add TFO key backup infrastructure, from Jason Baron.
9) Remove several old and unused ISDN drivers, from Arnd Bergmann.
10) Add devlink notifications for flash update status to mlxsw driver,
from Jiri Pirko.
11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.
12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.
13) Various enhancements to ipv6 flow label handling, from Eric
Dumazet and Willem de Bruijn.
14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
der Merwe, and others.
15) Various improvements to axienet driver including converting it to
phylink, from Robert Hancock.
16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.
17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
Radulescu.
18) Add devlink health reporting to mlx5, from Moshe Shemesh.
19) Convert stmmac over to phylink, from Jose Abreu.
20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
Shalom Toledo.
21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.
22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.
23) Track spill/fill of constants in BPF verifier, from Alexei
Starovoitov.
24) Support bounded loops in BPF, from Alexei Starovoitov.
25) Various page_pool API fixes and improvements, from Jesper Dangaard
Brouer.
26) Just like ipv4, support ref-countless ipv6 route handling. From
Wei Wang.
27) Support VLAN offloading in aquantia driver, from Igor Russkikh.
28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.
29) Add flower GRE encap/decap support to nfp driver, from Pieter
Jansen van Vuuren.
30) Protect against stack overflow when using act_mirred, from John
Hurley.
31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.
32) Use page_pool API in netsec driver, Ilias Apalodimas.
33) Add Google gve network driver, from Catherine Sullivan.
34) More indirect call avoidance, from Paolo Abeni.
35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.
36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.
37) Add MPLS manipulation actions to TC, from John Hurley.
38) Add sending a packet to connection tracking from TC actions, and
then allow flower classifier matching on conntrack state. From
Paul Blakey.
39) Netfilter hw offload support, from Pablo Neira Ayuso"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
net/mlx5e: Return in default case statement in tx_post_resync_params
mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
net: dsa: add support for BRIDGE_MROUTER attribute
pkt_sched: Include const.h
net: netsec: remove static declaration for netsec_set_tx_de()
net: netsec: remove superfluous if statement
netfilter: nf_tables: add hardware offload support
net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
net: flow_offload: add flow_block_cb_is_busy() and use it
net: sched: remove tcf block API
drivers: net: use flow block API
net: sched: use flow block API
net: flow_offload: add flow_block_cb_{priv, incref, decref}()
net: flow_offload: add list handling functions
net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
net: flow_offload: add flow_block_cb_setup_simple()
net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
...
-----BEGIN PGP SIGNATURE-----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=5hCV
-----END PGP SIGNATURE-----
Merge tag 'please-pull-for_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Tony Luck:
"All the bits that Boris had queued in his tree plus four patches to
add support for Intel Icelake Xeon and then fix a few corner cases"
* tag 'please-pull-for_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msec
EDAC, skx, i10nm: Fix source ID register offset
EDAC, i10nm: Check ECC enabling status per channel
EDAC, i10nm: Add Intel additional Ice-Lake support
EDAC: Make edac_debugfs_create_x*() return void
EDAC/aspeed: Remove set but not used variable 'np'
EDAC/ie31200: Reformat PCI device table
EDAC/ie31200: Add Intel Coffee Lake CPU support
EDAC/sifive: Add EDAC platform driver for SiFive SoCs
EDAC/sb_edac: Remove redundant update of tad_base
arm64: dts: stratix10: Add SDMMC EDAC node
EDAC/altera: Add Stratix10 SDMMC support
arm64: dts: stratix10: Add OCRAM EDAC node
EDAC/altera: Add Stratix10 OCRAM ECC support
EDAC/sysfs: Drop device references properly
EDAC/sysfs: Fix memory leak when creating a csrow object
One extra change wiring up the interrupt line for the external RTC chip
on the Pine H64.
-----BEGIN PGP SIGNATURE-----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=cinn
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-5.3-round-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner DT64 Changes for 5.3 - Round 2
One extra change wiring up the interrupt line for the external RTC chip
on the Pine H64.
* tag 'sunxi-dt64-for-5.3-round-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Pine H64: Add interrupt line for RTC
Link: https://lore.kernel.org/r/20190704065326.GA19010@wens.csie.org
Signed-off-by: Olof Johansson <olof@lixom.net>
both based on rk3399. Small improvements for RockPi, Sapphire and
rk3328-roc-cc boards. Improvements for the thermal handling on rk3399
as well as the rock960 board. rk3399 dwc3 clock updates and a small
start of the dtsi for the new rk3399pro (the one with the connected
npu).
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl0Z0WkQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgcKsCACu2pd7WnNmAaRp3DruFNban/9kBcSgxoHy
x26HBCeEpyKATf/3mSvjF/FXGH3lFI9Mk1QaRxXZuJSvbNHb+/6VlRH9A3BWqzxQ
kAg548mCt5deWxmpsLrJXvb0LdEUl0VpG4am+GtapW3D1FVrZEC3R95pqZPkXyKk
TRcZ5N7pcHlXdwdtiJfK0Fw0dFyenY5zpKob/Kb1zva0OSMdLqIGpVFUrbt9lBh9
VUUbskXqmhJUTnk8s4XCi/kcIOz/quMWfcBmJ7lJnlT9Jtk+KWCjw643C4y/qvqu
Q1ohoxn+SOYC30fRjZB9m3Lyt9pxp61rbA5a+hTIFsmZYfMUi8nN
=6kC8
-----END PGP SIGNATURE-----
Merge tag 'v5.3-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New boards the Khadas Edge family of sbcs and the Hugsun X99 TV box,
both based on rk3399. Small improvements for RockPi, Sapphire and
rk3328-roc-cc boards. Improvements for the thermal handling on rk3399
as well as the rock960 board. rk3399 dwc3 clock updates and a small
start of the dtsi for the new rk3399pro (the one with the connected
npu).
* tag 'v5.3-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire
arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs
arm64: dts: rockchip: enable rk3328 watchdog clock
arm64: dts: rockchip: Add support for Hugsun X99 TV Box
arm64: dts: rockchip: Define values for the IPA governor for rock960
arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi
arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs
arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance.
arm64: dts: rockchip: Add support for Khadas Edge/Edge-V/Captain boards
arm64: dts: rockchip: Enable HDMI audio on Rock Pi
Signed-off-by: Olof Johansson <olof@lixom.net>
This tag contains only two patches for updating coresight compatible string.
-----BEGIN PGP SIGNATURE-----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=Ak7B
-----END PGP SIGNATURE-----
Merge tag 'sprd-dt-v5.3-rc1' of https://github.com/lyrazhang/linux into arm/dt
Spreadtrum's devicetree for v5.3-rc1
This tag contains only two patches for updating coresight compatible string.
* tag 'sprd-dt-v5.3-rc1' of https://github.com/lyrazhang/linux:
arm64: dts: sc9860: Update coresight DT bindings
arm64: dts: sc9836: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
There should be a space both before and after the equal sign.
Add a missing space for the cooling cells property.
Fixes: f48cee3239 ("arm64: dts: qcom: qcs404: Add thermal zones for each sensor")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
The new route handling in ip_mc_finish_output() from 'net' overlapped
with the new support for returning congestion notifications from BPF
programs.
In order to handle this I had to take the dev_loopback_xmit() calls
out of the switch statement.
The aquantia driver conflicts were simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Before this patch, the Type-C port on the Sapphire board is dead.
If setting the 'regulator-always-on' property to 'vcc5v0_typec0'
then the port works for about 4 seconds at start-up. This is a
sample trace with a memory stick plugged in:
1.- The memory stick LED lights on and kernel reports:
[ 4.782999] scsi 0:0:0:0: Direct-Access USB DISK PMAP PQ: 0 ANSI: 4
[ 5.904580] sd 0:0:0:0: [sdb] 3913344 512-byte logical blocks: (2.00 GB/1.87 GiB)
[ 5.906860] sd 0:0:0:0: [sdb] Write Protect is off
[ 5.908973] sd 0:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 5.909122] sd 0:0:0:0: [sdb] No Caching mode page found
[ 5.911214] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[ 5.951585] sdb: sdb1
[ 5.954816] sd 0:0:0:0: [sdb] Attached SCSI removable disk
2.- 4 seconds later the memory stick LED lights off and kernel reports:
[ 9.082822] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
3.- After a minute the kernel reports:
[ 71.666761] usb 5-1: USB disconnect, device number 2
It has been checked that, although the LED is off, VBUS is present.
If, instead, the dr_mode is changed to host and the phy-supply changed
accordingly, then it works. It has only been tested in host mode.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As per binding documentation [1], the DWC3 core should have the "ref",
"bus_early" and "suspend" clocks. As explained in the binding, those
clocks are required for new platforms but not for existing platforms
before commit fe8abf332b ("usb: dwc3: support clocks and resets for
DWC3 core").
However, as those clocks are really treated as required, this ends with
having some annoying messages when the "rockchip,rk3399-dwc3" is used:
[ 1.724107] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
[ 1.731893] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
[ 2.495937] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
[ 2.647239] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
In order to remove those annoying messages, update the DWC3 hardware
module node and add all the required clocks. With this change, both, the
glue node and the DWC3 core node, have the clocks defined, but that's
not really a problem and there isn't a side effect on do this. So, we
can get rid of the annoying get clk error messages.
[1] Documentation/devicetree/bindings/usb/dwc3.txt
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the missing clock property for the watchdog on rk3328.
Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com>
[set wdt node to always enabled, as it is not board-specific]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add Mali nodes to Exynos3 and Exynos4.
-----BEGIN PGP SIGNATURE-----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=LHkX
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.3
Add Mali nodes to Exynos5433 and Exynos7.
* tag 'samsung-dt64-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add GPU/Mali T760 node to Exynos7
arm64: dts: exynos: Add GPU/Mali T760 node to Exynos5433
Signed-off-by: Olof Johansson <olof@lixom.net>
- Migrate to the new binding for the Denali NAND controller
- Use reserved-memory node instead of /memreserve/ for the
secure memory area
-----BEGIN PGP SIGNATURE-----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=TggE
-----END PGP SIGNATURE-----
Merge tag 'uniphier-dt64-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt
UniPhier ARM64 SoC DT updates for v5.3
- Migrate to the new binding for the Denali NAND controller
- Use reserved-memory node instead of /memreserve/ for the
secure memory area
* tag 'uniphier-dt64-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: add reserved-memory for secure memory
arm64: dts: uniphier: update to new Denali NAND binding
Signed-off-by: Olof Johansson <olof@lixom.net>
Add devicetree support for Hugsun X99 TV Box based on RK3399 SoC
Tested with LibreElec running kernel v5.1.2.
Following peripherals tested and work:
Peripheral works:
- UART2 debug
- eMMC
- USB 3.0 port
- USB 2.0 port
- sdio, sd-card
- HDMI
- Ethernet
- WiFi/BT
Not tested:
- Type-C port
- OPTICAL
- IR
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Currently the default thermal values for the rk3399-rock960 board is
inherited from the generic definition in rk3399.dtsi.
In order to ensure the rock960 has more room for througput before
being capped by the thermal framework and is correctly supported by
the IPA governor, let's define the power values and the right trip
points for better performances:
- sustainable power is tested to be 1550mW
- increase the first mitigation point to 75°C in order to get better
performances
- the first trip point is 65°C in order to let the IPA to collect
enough data for the PID regulation when it reaches 75°C
- restrict the cooling device to the big CPUs as the little CPUs
contribution to the heating effect can be considered negligible
The intelligent power allocator PID coefficient to be set in sysfs
are:
k_d: 0
k_po: 79
k_i: 10
k_pu: 50
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Currently the common thermal zones definitions for the rk3399 assumes
multiple thermal zones are supported by the governors. This is not the
case and each thermal zone has its own governor instance acting
individually without collaboration with other governors.
As the cooling device for the CPU and the GPU thermal zones is the
same, each governors take different decisions for the same cooling
device leading to conflicting instructions and an erratic behavior.
As the cooling-maps is about to become an optional property, let's
remove the cpu cooling device map from the GPU thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds core dtsi file for Rockchip RK3399Pro SoCs,
include rk3399.dtsi. Also enable pciei0/pcie_phy for AP to
talk to NPU part inside SoC.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Currently the rk3328-roc-cc ethernet is enabled using "snps,force_thresh_dma_mode".
While this works, the performance leaves a lot to be desired.
A previous attempt to improve performance used "snps,txpbl = <0x4>".
This also allowed networking to function, but performance varied between boards.
This patch takes that one step further.
Set txpbl and rxpbl to 0x4.
This can also be accomplished with "snps,pbl =<0x4>" which affects both.
Also set "snps,aal" which forces address aligned DMA mode.
Fixes: 4bc4d6013b (arm64: dts: rockchip: fix rk3328-roc-cc gmac2io stability issues)
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Leonidas P. Papadakos <papadakospan@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This is essentialy a squash of a bunch of history of cheza dt updates
from chromium kernel, some of which were themselves squashes of history
from older chromium kernels.
I don't claim any credit other than wanting to more easily boot upstream
kernel on cheza to have an easier way to test upstream driver work ;-)
I've added below in Cc tags all the original actual authors (apologies
if I missed any).
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <agross@kernel.org>
qcs404 has 10 sensors connected to the single TSENS IP. Define a thermal
zone for each of those sensors to expose the temperature of each zone.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
qcs404 has a single TSENS IP block with 10 sensors. The calibration data
is stored in an eeprom (qfprom) that is accessed through the nvmem
framework. We add the qfprom node to allow the tsens sensors to be
calibrated correctly.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
The memory regions specified by /memreserve/ are passed to
early_init_dt_reserve_memory_arch() with nomap=false, so it is
not suitable for reserving memory for Trusted Firmware-A etc.
Use the more robust /reserved-memory node with the no-map property
to prevent the kernel from mapping it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
With commit d8e8fd0ebf ("mtd: rawnand: denali: decouple controller
and NAND chips"), the Denali NAND controller driver migrated to the
new controller/chip representation.
Update DT for it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- Add i.MX8MQ based Librem5 devkit support.
- Add SNVS power key support for i.MX8MQ and i.MX8MM.
- Add GPIO alias for imx8mq and i.MX8QXP.
- A series from Daniel Baluta to add SAI devices and enable audio
support for imx8mm-evk board.
- Add DDR performance monitor unit support for i.MX8QXP.
- Add irqsteer interrupt controller device for i.MX8MQ SoC.
- Add CPU speed grading and all OPPs for i.MX8MM and i.MX8MQ.
- Add OCOTP device node for i.MX8QXP.
- Various device addition for LS1028A: SATA, qDMA, USB, Mali DP500 and
temperature sensor.
- Random minor coding style improvements.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdEcFcAAoJEFBXWFqHsHzOcNYIAICVsBiJX/gU0t+jT7i1KL83
jDe/DDNg8j9PgR0ElLPejskJgnNYLS0DTWYCY/yPgzK8bwLuqxseVyjXBhyptZ1o
Oecgp9c/79RGsJi9+tFlPKCB/jL4gvagbNn0kPAAoCv3dV5n5FikuSXfsN1v0DJi
JpBXO0IHpkqRTJKk7Ran5MzxxaHbWkjMn0u80ewsAioZv/XhPg5xVSsONleQdh2V
YtZkjcAuA7M9ZOLTKcEFmGyZW/ZTLcW7+xaj9ETJGtMJEi60igPyeFcmd1YIKfIh
g1RwqgDilwEbh2rNulyZbRkRJKQDjTeHUNRqyGEM54lxAB52VQo5hHYa56K2m9Q=
=SIR/
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree changes for 5.3:
- Add i.MX8MQ based Librem5 devkit support.
- Add SNVS power key support for i.MX8MQ and i.MX8MM.
- Add GPIO alias for imx8mq and i.MX8QXP.
- A series from Daniel Baluta to add SAI devices and enable audio
support for imx8mm-evk board.
- Add DDR performance monitor unit support for i.MX8QXP.
- Add irqsteer interrupt controller device for i.MX8MQ SoC.
- Add CPU speed grading and all OPPs for i.MX8MM and i.MX8MQ.
- Add OCOTP device node for i.MX8QXP.
- Various device addition for LS1028A: SATA, qDMA, USB, Mali DP500 and
temperature sensor.
- Random minor coding style improvements.
* tag 'imx-dt64-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
arm64: dts: librem5: enable the SNVS power key
arm64: dts: librem5: Limit the USB to 5V
arm64: dts: imx8qxp: added ddr performance monitor nodes
arm64: dts: imx8qxp: sort LSIO subsystem devices
arm64: dts: imx8qxp: sort alias alphabetically
arm64: dts: imx8qxp: Add lsio_mu13 node
arm64: dts: imx8mm-evk: Enable audio codec wm8524
arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
arm64: dts: fsl: ls1028a: Add qDMA node
arm64: dts: imx8mm: Enable SNVS power key according to board design
arm64: dts: imx8mq-evk: Enable SNVS power key
arm64: dts: ls1028a: add crypto node
arm64: dts: ls1028a: Add temperature sensor node
arm64: dts: imx8mm: Move gic node into soc node
arm64: dts: imx8mm: Move usbphy out of soc node
arm64: dts: imx8mm: Pass the 'ranges' property
arm64: dts: imx8mm: Pass a unit name for the 'soc' node
arm64: dts: fsl: imx8mq: add the snvs power key node
arm64: dts: ls1028a: fix watchdog device node
arm64: dts: ls1028a: Enable sata.
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- This is a set of device tree changes with new clocks - adding
clock info for i.MX8 GPIO and SNVS RTC device.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdEY9IAAoJEFBXWFqHsHzONzkH/iQWmmauxY3ONsDhCOiq2xkz
agKfN77pgM0005NJl8bP/+wyl6JXozpq31PJrbWPvdZCwElEzBykmWZzyG2cl6Bx
ajwsldhBzMoYKvjVH0MD3ldPXoANsvfIQiAyVzPHY/tCBHI6hnaJKWCaQ0fsqg5M
vZ0lf5Adqh9MN7lBKWBz1tbOgqCNAVdhRrvLdrTuoQ/asjivqzl3oXXMWzzrc4lK
pUGPg1+iqf/MSBVoX8F3ETO9W+GjdjHE0qoGttXf90w2epQZqO5Ta2mfhzyF4fkE
pcPGKQTASi+zOcUuzgM97TGfWbeOYhd0kRmInZVZt+Wce2Ju4MO5M0Iyxp6xvJI=
=GaZH
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-clkdep-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX DT changes with new clock for 5.3:
- This is a set of device tree changes with new clocks - adding
clock info for i.MX8 GPIO and SNVS RTC device.
* tag 'imx-dt-clkdep-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mq: add clock for SNVS RTC node
arm64: dts: imx8mm: add clock for SNVS RTC node
arm64: dts: imx8mm: add clock for GPIO node
clk: imx8m: Add GIC clock
dt-bindings: clock: imx8m: Add GIC clock
clk: imx8mm: add SNVS clock to clock tree
dt-bindings: clock: imx8mm: Add SNVS clock
clk: imx8mq: add SNVS clock to clock tree
dt-bindings: clock: imx8mq: Add SNVS clock
clk: imx8mm: add GPIO clocks to clock tree
dt-bindings: clock: imx8mm: Add GPIO clocks
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains the bulk of the Tegra changes this cycle. It has a bunch
of improvements across almost all boards. These are mostly small and not
too exciting additions.
Most notably perhaps is the continuation of Jetson Nano support, which
is now mostly on feature parity with Jetson TX1.
-----BEGIN PGP SIGNATURE-----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=Ea0t
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.3-rc1
This contains the bulk of the Tegra changes this cycle. It has a bunch
of improvements across almost all boards. These are mostly small and not
too exciting additions.
Most notably perhaps is the continuation of Jetson Nano support, which
is now mostly on feature parity with Jetson TX1.
* tag 'tegra-for-5.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (28 commits)
arm64: tegra: Enable PCIe slots in P2972-0000 board
arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT
arm64: tegra: Add PEX DPD states as pinctrl properties
arm64: tegra: Enable ACONNECT, ADMA and AGIC
arm64: tegra: Add ACONNECT, ADMA and AGIC nodes
arm64: tegra: Sort device tree nodes alphabetically
arm64: tegra: Fix Jetson Nano GPU regulator
arm64: tegra: Update Jetson TX1 GPU regulator timings
arm64: tegra: Fix AGIC register range
arm64: tegra: Add INA3221 channel info for Jetson TX2
arm64: tegra: Enable PWM on Jetson Nano
arm64: tegra: Enable CPU sleep on Jetson Nano
arm64: tegra: Add ID EEPROMs on Jetson Nano
arm64: tegra: Add ID EEPROM for Jetson TX2 Developer Kit
arm64: tegra: Add ID EEPROM for Jetson TX2 module
arm64: tegra: Add ID EEPROM for Jetson TX1 Developer Kit
arm64: tegra: Add ID EEPROM for Jetson TX1 module
arm64: tegra: Don't use architected timer for suspend on Tegra210
arm64: tegra: Mark architected timer as always on
arm64: tegra: Add pin control states for I2C on Tegra186
...
Signed-off-by: Olof Johansson <olof@lixom.net>
For Armada 7K/8K:
- enable AP806 thermal throttling with CPUfreq
- add missing #interrupt-cells property allowing configuring
interrupt for GPIO
On Armada 8040 based board:
- Fix PCI memory window on Mcbin board
- Set SFP power limit on clearfog GT board
- Disable AP I2C on Armada-8040-DB
On Armada 3720 based board espressobin correct the SPI node used for
NOR flash
On Armada 7040 DB board add USB current regulators
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXQy4uwAKCRALBhiOFHI7
1dW6AJ9EYqnK7TQxYcxXl/gy8E5zaTH8igCeKGKpjV0P2sUv66nC3pmdipvMP68=
=KCf7
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.3-1' of git://git.infradead.org/linux-mvebu into arm/dt
mvebu dt64 for 5.3 (part 1)
For Armada 7K/8K:
- enable AP806 thermal throttling with CPUfreq
- add missing #interrupt-cells property allowing configuring
interrupt for GPIO
On Armada 8040 based board:
- Fix PCI memory window on Mcbin board
- Set SFP power limit on clearfog GT board
- Disable AP I2C on Armada-8040-DB
On Armada 3720 based board espressobin correct the SPI node used for
NOR flash
On Armada 7040 DB board add USB current regulators
* tag 'mvebu-dt64-5.3-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add missing #interrupt-cells property
arm64: dts: marvell: armada-7040-db: Add USB current regulators
arm64: dts: armada-3720-espressobin: correct spi node
arm64: dts: marvell: Disable AP I2C on Armada-8040-DB
arm64: dts: marvell: Enable AP806 thermal throttling with CPUfreq
arm64: dts: marvell: Change core numbering in AP806 thermal-node
arm64: dts: marvell: clearfog-gt-8k: set SFP power limit
arm64: dts: marvell: mcbin: enlarge PCI memory window
Signed-off-by: Olof Johansson <olof@lixom.net>
* Renesas SoCs
- Revise usb2_phy nodes and phys properties according to updated bindings
- Use ip=on for bootargs
* R-Car Gen 3 and RZ/G2M (r8a774a1) SoCs
- Add dynamic power coefficient
- Create thermal zone to support IPA
* R-Car E3 (r8a77990) and D3 (r8a77995) SoCs
- Point LVDS0 to its companion LVDS1
* R-Car E3 (r8a77990) SoC
- Corresct register range of DU
* R-Car E3 (r8a77990) based Ebisu board
- Remove renesas, no-ether-link property
* R-Car D3 (r8a77995) based Draak board:
- Remove unnecessary index from vin4 port
* RZ/G2M (r8a774a1) based HiHope main and sub-boards:
- Initial support
- Describe CPU capacity and topoligy
- Enable CMT, HDMI, LEDs, PCIe RWDT, SCIF, SDHI, TMU, and USB 2.0 and 3.0
* RZ/G2E (r8a774c0) SoC based EK874 board:
- Clean up CPU compatible strings
- Enable: Bluetooth, HDMI audio and video, TPU, USB 3.0 and WLAN
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAl0MmxcACgkQ189kaWo3
T75kSg//b3cCgBVkwq8CnUeoWG8qOXXSFU0YyigRv0sAsZEKpBik4cmPyB4KW/Kn
BDfM3PCm9Xnq6e6O9xr4r+KHqw4Q27QYTcIIBVgkKqzx1iZi4lytO6H2R12Qjuap
rFIEBRUlyXfKM/9iNcwiRRMLmYHgY/sYNOcWvn2Vb6X6B4uRA/2QkTL/mGo4XYMv
FeOVlb1sIZravrru1RVE9wc1nLGk3t0Q9W5okZLMwVrfCIg8o8GwSxK7YOYKfB+p
q7sA7rQOik61+2VDz2XdYRcS6BwlGJQXOTA/BgD457vsqLKI5wlmO66JcMMnEQo9
efl0dJS+T/8AiEO11jG1lmT5gsU+nCAI8wK2r7Pa59EnDBZGIrwX67sd/wi9YE8K
CZ/mP9yd/S/g4Ai/pEiVLlsWJOs0/hmXT3MxZhThvk3vdQ7oq3ada6JUUn17lhPS
davs6l5wtKfcKSxAXja0Wc5g1TXGQ0UMsSMNJmqX6T3zfgwIb7y3Wvrx8P1B3/q4
GYpnwBS2d7HISWhYQvaCbA3a5wnsbssjg2BmvOr0Nv0RgX0+qfmxADc2/vx9lcD7
VlEbjTtWWTV2FtbvsOZSFfMYDXP/LXdI+VWXSu5NHKcybooC/cuUYzNVOBsYda/k
pSOW/EIou8kC4XlRGh3Vf/JNU4PagujDRVojhUwkztcjm+dteeY=
=Qsip
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt
Renesas ARM64 Based SoC DT Updates for v5.3
* Renesas SoCs
- Revise usb2_phy nodes and phys properties according to updated bindings
- Use ip=on for bootargs
* R-Car Gen 3 and RZ/G2M (r8a774a1) SoCs
- Add dynamic power coefficient
- Create thermal zone to support IPA
* R-Car E3 (r8a77990) and D3 (r8a77995) SoCs
- Point LVDS0 to its companion LVDS1
* R-Car E3 (r8a77990) SoC
- Corresct register range of DU
* R-Car E3 (r8a77990) based Ebisu board
- Remove renesas, no-ether-link property
* R-Car D3 (r8a77995) based Draak board:
- Remove unnecessary index from vin4 port
* RZ/G2M (r8a774a1) based HiHope main and sub-boards:
- Initial support
- Describe CPU capacity and topoligy
- Enable CMT, HDMI, LEDs, PCIe RWDT, SCIF, SDHI, TMU, and USB 2.0 and 3.0
* RZ/G2E (r8a774c0) SoC based EK874 board:
- Clean up CPU compatible strings
- Enable: Bluetooth, HDMI audio and video, TPU, USB 3.0 and WLAN
* tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (53 commits)
arm64: dts: renesas: hihope-common: Remove "label" from LEDs
arm64: dts: renesas: hihope-common: Add HDMI support
arm64: dts: renesas: r8a774a1: Add HDMI encoder instance
arm64: dts: renesas: r8a774a1: Add dynamic power coefficient
arm64: dts: renesas: r8a774a1: Create thermal zone to support IPA
arm64: dts: renesas: r8a774a1: Add CPU capacity-dmips-mhz
arm64: dts: renesas: r8a774a1: Add CPU topology on r8a774a1 SoC
arm64: dts: renesas: hihope-common: Add LEDs support
arm64: dts: renesas: hihope-common: Enable USB3.0
arm64: dts: renesas: hihope-common: Add USB 2.0 support
arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks
arm64: dts: renesas: r8a774a1: Add TMU device nodes
arm64: dts: renesas: r8a774a1: Add CMT device nodes
arm64: dts: renesas: hihope-common: Add uSD and eMMC
arm64: dts: renesas: r8a77990: Fix register range of display node
arm64: dts: renesas: cat874: Enable usb role switch support
arm64: dts: renesas: cat874: Enable USB3.0 host/peripheral device node
arm64: dts: renesas: r8a7799[05]: Point LVDS0 to its companion LVDS1
arm64: dts: renesas: hihope-common: Add RWDT support
arm64: dts: renesas: hihope-rzg2-ex: Enable PCIe support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
arm and arm64, a fix for the array syntax raised by our DT schemas.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyRegAKCRDj7w1vZxhR
xQ7SAP9gWeCGiyq+N2lvgFUOMVUezlDcJx2IVjoJvSQcyjeD2QD/W0m+fldHe7BB
PEv3s5BbYAYFHe+krqTPejcLK+c5hwg=
=4UQl
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
This time we only have a single patch for our command branch between
arm and arm64, a fix for the array syntax raised by our DT schemas.
* tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sunxi: h3/h5: Fix GPIO regulator state array
Signed-off-by: Olof Johansson <olof@lixom.net>
- Some fixes for the DT schemas that were added during this release
- Wifi support for the H6
- LRADC suppport for the A64
- Some background work on A64 boards, to enable various devices such
as touchscreens, PMIC, audio, wifi, etc.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyQcQAKCRDj7w1vZxhR
xbybAP9uAJcwix86BmYLIA3I7n1fT1oLooS+WfPL4btmqYBykAD/fK7Nn1g3alWg
7c61AEJKDHZwObU1dNpxjvsjT+/u+Qc=
=B/U5
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-5.3-201906210808' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of arm64 DT changes, this time with:
- Some fixes for the DT schemas that were added during this release
- Wifi support for the H6
- LRADC suppport for the A64
- Some background work on A64 boards, to enable various devices such
as touchscreens, PMIC, audio, wifi, etc.
* tag 'sunxi-dt64-for-5.3-201906210808' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Add DMA node
arm64: dts: allwinner: a64: Add lradc node
dt-bindings: input: sun4i-lradc-keys: Add A64 compatible
arm64: dts: allwinner: h6: add r_watchog node
arm64: dts: allwinner: h6: add watchdog node
dt-bindings: watchdog: add Allwinner H6 watchdog
arm64: dts: allwinner: a64: Enable audio on Teres-I
arm64: dts: allwinner: a64: bananapi-m64: Enable PMIC USB power supply
arm64: dts: allwinner: axp803: add USB power supply node
arm64: dts: allwinner: a64: Add pinmux for RGB666 LCD
arm64: dts: allwinner: a64: orangepi-win: Add wifi and bluetooth nodes
arm64: dts: allwinner: h6: add PIO VCC bank supplies for Pine H64
arm64: dts: allwinner: a64-oceanic-5205-5inmfd: Enable GT911 CTP
arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP node
arm64: dts: allwinner: a64: move I2C pinctrl to dtsi
Signed-off-by: Olof Johansson <olof@lixom.net>
* Hi3660 SoC and related boards:
- Added CoreSight trace components
* Hi6220 SoC and related boards:
- Updated CoreSight funnel and replicator using new bindings to fix warning
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=GTKf
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.3' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for v5.3
* Hi3660 SoC and related boards:
- Added CoreSight trace components
* Hi6220 SoC and related boards:
- Updated CoreSight funnel and replicator using new bindings to fix warning
* tag 'hisi-arm64-dt-for-5.3' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hi3660: Add CoreSight support
arm64: dts: hi6220: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
Add nodes for GPU (Mali T760) to Exynos7. Current support for Exynos7
misses a lot, including proper clocks, power domains, frequency and
voltage scaling and cooling. However this still can provide basic GPU
description. Not tested on HW.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add nodes for GPU (Mali T760) to Exynos5433. Missing element is the
cooling device. Not tested on HW.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The external PCF8563 RTC chip's interrupt line is connected to the NMI
line on the SoC.
Add the interrupt line to the device tree.
Fixes: 17ebc33afc ("arm64: allwinner: h6: add PCF8563 RTC on Pine H64 board")
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The charge controller can handle 14V but the PTC on the devkit can only
handle 6V so limit the negotiated voltage to 5V.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We prefer to sort device nodes under simple bus in order of unit
address. Let's sort the devices under lsio_subsys properly.
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8MM has one wm8524 audio codec connected with
SAI3 digital audio interface.
This patch uses simple-card machine driver in order
to enable wm8524 codec.
We need to set:
* SAI3 pinctrl configuration
* codec reset gpio pinctrl configuration
* clock hierarchy
* codec node
* simple-card configuration
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach