Added extra test cases for different control actions (reclassify, pipe
etc.), cookies, max values & exceeding maximum, and replace existing
actions unit tests.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently NOLOCK qdiscs pay a measurable overhead to atomically
manipulate the __QDISC_STATE_RUNNING. Such bit is flipped twice per
packet in the uncontended scenario with packet rate below the
line rate: on packed dequeue and on the next, failing dequeue attempt.
This changeset moves the bit manipulation into the qdisc_run_{begin,end}
helpers, so that the bit is now flipped only once per packet, with
measurable performance improvement in the uncontended scenario.
This also allows simplifying the qdisc teardown code path - since
qdisc_is_running() is now effective for each qdisc type - and avoid a
possible race between qdisc_run() and dev_deactivate_many(), as now
the some_qdisc_is_busy() can properly detect NOLOCK qdiscs being busy
dequeuing packets.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Debabrata Banerjee says:
====================
bonding: performance and reliability
Series of fixes to how rlb updates are handled, code cleanup, allowing
higher performance tx hashing in balance-alb mode, and reliability of
link up/down monitoring.
v2: refactor bond_is_nondyn_tlb with inline fn, update log comment to
point out that multicast addresses will not get rlb updates.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In a mixed environment it may be difficult to tell if your hardware
support carrier, if it does not it can always report true. With a new
use_carrier option of 2, we can check both carrier and link status
sequentially, instead of one or the other
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rx load balancing provided by balance-alb is not mutually
exclusive with using hashing for tx selection, and should provide a decent
speed increase because this eliminates spinlocks and cache contention.
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace homegrown mac addr checks with faster defs from etherdevice.h
Note that this will also prevent any rlb arp updates for multicast
addresses, however this should have been forbidden anyway.
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
arps for incomplete entries can't be sent anyway.
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun says:
====================
net/smc: enhancements 2018/05/15
here are smc patches for net-next. The first one is a fix for net-next
commit 01d2f7e2cd "net/smc: sockopts TCP_NODELAY and TCP_CORK".
Patch 7 improves Connection Layer Control error handling, patch 10
improves abnormal termination of link groups. The remaining patches
from Karsten improve Link Layer Control code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid to run the processing in smc_lgr_terminate() more than once,
remember when the link group termination is triggered.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop incoming messages when the link is flagged as inactive.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before smc_lgr_free() is called the link must be set inactive by calling
smc_llc_link_inactive().
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Always set a reason_code when smc_conn_create() returns an error code.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMC handles deferred work in tasklets. As tasklets cannot sleep this
can result in rare EBUSY conditions, so defer this work in a work queue.
The high level api functions do not defer work because they can sleep
until the llc send is actually completed.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the llc layer specific initialization and cleanup out of smc_core.c
into smc_llc.c (smc_llc_link_init and smc_llc_link_clear). Move all
initialization of a link into the new init function.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make smc_llc_send_test_link() static and remove it from the header file.
And to send a test_link response set the response flag and send the
message back as-is, without using smc_llc_send_test_link(). And because
smc_llc_send_test_link() must no longer send responses, remove the
response flag handling from the function.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove an unneeded (void *) cast from the calls to
smc_llc_send_message(). No functional changes.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Register new rmb buffers with the remote peer by exchanging a
confirm_rkey llc message.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If TCP_NODELAY is set or TCP_CORK is reset, setsockopt triggers the
tx worker. This does not make sense, if the SMC socket switched to
the TCP fallback when the connection is created. This patch adds
the additional check for the fallback case.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Misc update for mlx5e netdevice driver
From Gal Pressman:
- Remove MLX5E_TEST_BIT macros and use test_bit instead
- Use __set_bit when possible
From Eran Ben Elisha:
- Improve debug print on initial RX posting timeout
From Or Gerlitz:
- Support offloaded TC flows with no matches on headers
- mlx5e TC cleanups
Trivial cleanups From Roi, Tariq and Saeed:
- Use bool as return type for mlx5e_xdp_handle
- Use u8 instead of int for LRO number of segments
- Skip redundant checks when providing NUD lastuse feedback
- Remove redundant vport context vlan update
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJa+gseAAoJEEg/ir3gV/o+m54H/1dMnavEL5kBr4KlLMO1AYrI
PL+BeOyVyOkXE5h4IJm070SPukV79SoC3ntjj3KsRBw65WhLmo0Lw10GeDwXove1
BZ+mvNG7kvTZgXG1LfR2R6wvFrum2bcj1h5A4+/BQA9Zur0PusWbZvQ+5s3vQRRX
TqapkcitAKPxeWPm8YOGsKxiVfnwVgX1C/gE2Jr05aV8veuWF2QlmrAkm38oOasG
5rZ5fM3YQwaXJrBRg2uI5merIi5sU0GTVbMCdQ8gcS3YHVXDNJxOm60QnT6cVGPi
eZzIPrU7iksWvYdZ7AR3mqnuoobbgBbbPu36qTyQNJJR+28JJpaTVshnpEhvg1Y=
=9qrA
-----END PGP SIGNATURE-----
Merge tag 'mlx5e-updates-2018-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5e-updates-2018-05-14
Misc update for mlx5e netdevice driver
From Gal Pressman:
- Remove MLX5E_TEST_BIT macros and use test_bit instead
- Use __set_bit when possible
From Eran Ben Elisha:
- Improve debug print on initial RX posting timeout
From Or Gerlitz:
- Support offloaded TC flows with no matches on headers
- mlx5e TC cleanups
Trivial cleanups From Roi, Tariq and Saeed:
- Use bool as return type for mlx5e_xdp_handle
- Use u8 instead of int for LRO number of segments
- Skip redundant checks when providing NUD lastuse feedback
- Remove redundant vport context vlan update
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta says:
====================
Misc. Bug Fixes and clean-ups for HNS3 Driver
This patch-set mainly introduces various bug fixes, cleanups and one
very small enhancement to existing HN3 driver code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We call pcim_iomap in hclge_pci_init, pcim_iounmap should be called
in error handle of hclge_init_ae_dev.
We call pcim_iomap in hclge_pci_init, but do not call pcim_iounmap in
hclge_pci_uninit. When we remove the hclge.ko and insert it again, a
problem that pci can not map will happen. pcim_iounmap need to be called
in hclge_pci_uninit.
Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As HNS3 driver will enable SRIOV default and enable all VFs the
HW support, if PF and VF driver compiled to kernel, VF driver
will work on host default, it is not right.
This patch adds support for hns3_driver.sriov_configure to support
user configs the VF_num, and do not enable sriov default.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Suggested-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When hclge_ae_start is called, hdev->hw.mac.link may be set
to one after up/down multi-times, which does not correspond to
the link state of netdev when the netdev is up.
This fixes it by setting hdev->hw.mac.link to zero when
hclge_ae_start is called.
Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When sriov is enabled, the Qset and tc mapping is not longer one
to one relation.
This patch fixes it by mapping all pf and vf's Qset to tc.
Fixes: 848440544b ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A client includes many client instance. Just like ae_algo, Initializing
client instance failed does not represent registering client failed.
The action of registering client just is adding client to the client
list and the result always is true. This patch changes the return
value of hnae3_register_client form a variable value to a fixed value,
makes the function always return ok.
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ae_algo is used by many ae_devs. It is not only belong to just a
ae_dev. Initializing ae_dev failed does not represent registering ae_algo
failed. Because the action of registering ae_algo just is adding ae_algo
to the ae_algo list and it is always is true, it make no sense to define
return type as int.
This patch changes the return type of hnae3_register_ae_algo from int to
void.
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If hclge.ko has not been inserted, the value of ret always is zero
in hnae3_register_ae_dev. If hclge.ko has been inserted, the value
of ret is zero or non zero. Different execution ways have different
results. It is confusing.
The ae_dev which is initialized failed can be reinitialized when we
remove hclge.ko and insert it again. For the case initializing client
instance, it is just like the case initializing ae_dev. The main function
of hnae3_register_ae_dev is adding the ae_dev to ad_dev list. Because
adding ae_dev is always ok, we does not need to return any in this
function.
This patch changes the return type of hnae3_register_ae_dev from int
to void.
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the client instance is initializd failed, we do not need to uninit it.
This patch adds a state check to check init state of client instance.
Fixes: 38caee9d3e ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When initializing ae_dev failed during loading hclge.ko, the drvdata will
be set to null. When removing hns3.ko, we get a null ae_dev. It causes the
null pointer problem.
This patch removes pci_set_drvdata from error handle of hclge_init_ae_dev
to fix the bug, since pci_set_drvdata has been called in hns3_remove.
Also, we do not need to uninit the ae_dev which is not initialized. And
it may be the one which is initialized failed.
Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When hnae3_unregister_ae_algo is called by PF, pci_disable_sriov is
called. And then, hns3_remove is called by VF. We get deadlocked in
this case.
Since VF pci device is dependent on PF pci device, When PF pci device
is removed, VF pci device must be removed. Also, To solve the deadlock
problem, VF pci device should be removed before PF pci device is removed.
This patch moves pci_enable/disable_sriov from hclge to hns3 to solve
the deadlock problem.
Also, we do not need to return EPROBE_DEFER in hnae3_register_ae_dev,
because SRIOV is no longer enabled in the context calling
hnae3_register_ae_dev. Mutex_trylock can be replaced with mutex_lock.
Fixes: 424eb834a9 ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC")
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandre Belloni says:
====================
Microsemi Ocelot Ethernet switch support
This series adds initial support for the Microsemi Ethernet switch
present on Ocelot SoCs.
This only has bridging (and STP) support for now and it uses the
switchdev framework.
Coming features are VLAN filtering, link aggregation, IGMP snooping.
The switch can also be connected to an external CPU using PCIe.
Also, support for integration on other SoCs will be submitted.
The ocelot dts changes are here for reference and should probably go
through the MIPS tree once the bindings are accepted.
Changes in v3:
- Collected Reviewed-by
* Switchdev driver:
- Fixed two issues reported by kbuild
- Modified ethtool statistics to support different layoiut on different chips and take care of counter overflow
Changes in v2:
- Dropped Microsemi Ocelot PHY support
* MIIM driver:
- Documented interrupts bindings
- Moved the driver to drivers/net/phy/
- Removed unused mutex
- Removed MDIO bus scanning
* Switchdev driver:
- Changed compatible to mscc,vsc7514-switch
- Removed unused header inclusion
- Factorized MAC table selection in ocelot_mact_select()
- Disable the port in ocelot_port_stop()
- Fixed the smatch endianness warnings
- int to unsinged int where necessary
- Removed VID handling for the FDB it has been reworked anyway and will be
submitted with VLAN support
- Fixed up unused cases in ocelot_port_attr_set()
- Added a loop to register all the IO register spaces
- the ports are now in an ethernet-ports node
I've tried switching to NAPI but this is not working well, mainly because the
only way to disable interrupts is to actually mask them in the interrupt
controller (it is not possible to tell the switch to stop generating
interrupts).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add myself as a maintainer for the Microsemi Ethernet switches.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a driver for Microsemi Ocelot Ethernet switch support.
This makes two modules:
mscc_ocelot_common handles all the common features that doesn't depend on
how the switch is integrated in the SoC. Currently, it handles offloading
bridging to the hardware. ocelot_io.c handles register accesses. This is
unfortunately needed because the register layout is packed and then depends
on the number of ports available on the switch. The register definition
files are automatically generated.
ocelot_board handles the switch integration on the SoC and on the board.
Frame injection and extraction to/from the CPU port is currently done using
register accesses which is quite slow. DMA is possible but the port is not
able to absorb the whole switch bandwidth.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
DT bindings for the Ethernet switch found on Microsemi Ocelot platforms.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a driver for the Microsemi MII Management controller (MIIM) found on
Microsemi SoCs.
On Ocelot, there are two controllers, one is connected to the internal
PHYs, the other one can communicate with external PHYs.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DT bindings for the Microsemi MII Management Controller found on Microsemi
SoCs
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner says:
====================
sctp: Introduce sctp_flush_ctx
This struct will hold all the context used during the outq flush, so we
don't have to pass lots of pointers all around.
Checked on x86_64, the compiler inlines all these functions and there is no
derreference added because of the struct.
This patchset depends on 'sctp: refactor sctp_outq_flush'
Changes since v1:
- updated to build on top of v2 of 'sctp: refactor sctp_outq_flush'
Changes since v2:
- fixed a rebase issue which reverted a change in patch 2.
- rebased on v3 of 'sctp: refactor sctp_outq_flush'
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A collection of fixups from previous patches, left for later to not
introduce unnecessary changes while moving code around.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pre-compute these so the compiler won't reload them (due to
no-strict-aliasing).
Changes since v2:
- Do not replace a return with a break in sctp_outq_flush_data
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With this struct we avoid passing lots of variables around and taking care
of updating the current transport/packet.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner says:
====================
sctp: refactor sctp_outq_flush
Currently sctp_outq_flush does many different things and arguably
unrelated, such as doing transport selection and outq dequeueing.
This patchset refactors it into smaller and more dedicated functions.
The end behavior should be the same.
The next patchset will rework the function parameters.
Changes since v1:
- fix build issues on patches 3 and 4, and updated 5 and 8 because of
it.
Changes since v2:
- fixed panic if building with just up to patch 3 applied
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove an inner one, which tended to be error prone due to the cascading
and it can be replaced by a simple if ().
Rework the outer one so that the actual flush code is not inside it. Now
we first validate if we can or cannot send data, return if not, and then
the flush code.
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Retransmissions may be triggered when in user context, so lets make use
of gfp.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To the new sctp_outq_flush_transports.
Comment on Nagle is outdated and removed. Nagle is performed earlier, while
checking if the chunk fits the packet: if the outq length is not enough to
fill the packet, it returns SCTP_XMIT_DELAY.
So by when it gets to sctp_outq_flush_transports, it has to go through all
enlisted transports.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To the new sctp_outq_flush_data. Again, smaller functions and with well
defined objectives.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch renames current sctp_outq_flush_rtx to __sctp_outq_flush_rtx
and create a new sctp_outq_flush_rtx, with the code that was on
sctp_outq_flush. Again, the idea is to have functions with small and
defined objectives.
Yes, there is an open-coded path selection in the now sctp_outq_flush_rtx.
That is kept as is for now because it may be very different when we
implement retransmission path selection algorithms for CMT-SCTP.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Named sctp_outq_flush_ctrl and, with that, keep the contexts contained.
One small fix embedded is the reset of one_packet at every iteration.
This allows bundling of some control chunks in case they were preceeded by
another control chunk that cannot be bundled.
Other than this, it has the same behavior.
Changes since v2:
- Fixed panic reported by kbuild test robot if building with
only up to this patch applied, due to bad parameter to
sctp_outq_select_transport and by not initializing packet after
calling sctp_outq_flush_ctrl.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We had two spots doing such complex operation and they were very close to
each other, a bit more tailored to here or there.
This patch unifies these under the same function,
sctp_outq_select_transport, which knows how to handle control chunks and
original transmissions (but not retransmissions).
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factor out the code for generating singletons. It's used only once, but
helps to keep the context contained.
The const variables are to ease the reading of subsequent calls in there.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Mashak